-## $Cambridge: exim/doc/doc-src/FAQ.src,v 1.6 2005/02/15 09:27:45 ph10 Exp $
+## $Cambridge: exim/doc/doc-src/FAQ.src,v 1.7 2005/05/06 08:28:16 ph10 Exp $
##
## This file is processed by Perl scripts to produce an ASCII and an HTML
## version. Lines starting with ## are omitted. The markup used with paragraphs
You can test the link using pings of large packets and see what works:
-==> ping -s host 2048
+==> ping -s host 2048
Try reducing the MTU on the sending host:
-==> ifconfig le0 mtu 1300
+==> ifconfig le0 mtu 1300
Alternatively, you can reduce the size of the buffer Exim uses for SMTP
output by putting something like
second solution is used, users can empty their mailboxes by updating
them, but cannot delete them.
- If your problem involves mail to \/root/\, see also Q0507.
+ If your problem involves mail to \/root/\, see also Q0039.
Q0037: I am experiencing mailbox locking problems with Sun's \"mailtool"\ used
by a \"mail.info"\ descriptor).
Test this by running the command:
-==> logger -p mail.notice test
+==> logger -p mail.notice test
and seeing which logs it goes into. From Exim release 4.31 it is
possible to disable the rejectlog by setting \write_rejectlog\ false.
ensure that this happens throughout the build, it's best to export it in
your environment:
-==> MAKEFLAGS='-B'
- export MAKEFLAGS
- make
+==> MAKEFLAGS='-B'
+ export MAKEFLAGS
+ make
Q0116: I have tried to build Exim with Berkeley DB 3 and 4, but I always get
==> # Don't allow domains whose single MX (or A) record is a
# "special-use IPv4 address", as listed in RFC 3330.
ignore_target_hosts = \
- # Hosts on "this network"; RFC 1700 (page 4) states that these
- # are only allowed as source addresses
- 0.0.0.0/8 : \
- # Private networks, RFC 1918
- 10.0.0.0/8 : 172.16.0.0/12 : 192.168.0.0/16 : \
- # Internet host loopback address, RFC 1700 (page 5)
- 127.0.0.0/8 : \
- # "Link local" block
- 169.254.0.0/16 : \
- # "TEST-NET" - should not appear on the public Internet
- 192.0.2.0/24 : \
- # 6to4 relay anycast addresses, RFC 3068
- 192.88.99.0/24 : \
- # Network interconnect device benchmark testing, RFC 2544
- 198.18.0.0/15 : \
- # Multicast addresses, RFC 3171
- 224.0.0.0/4 : \
- # Reserved for future use, RFC 1700 (page 4)
- 240.0.0.0/4
+ # Hosts on "this network"; RFC 1700 (page 4) states that these
+ # are only allowed as source addresses
+ 0.0.0.0/8 : \
+ # Private networks, RFC 1918
+ 10.0.0.0/8 : 172.16.0.0/12 : 192.168.0.0/16 : \
+ # Internet host loopback address, RFC 1700 (page 5)
+ 127.0.0.0/8 : \
+ # "Link local" block
+ 169.254.0.0/16 : \
+ # "TEST-NET" - should not appear on the public Internet
+ 192.0.2.0/24 : \
+ # 6to4 relay anycast addresses, RFC 3068
+ 192.88.99.0/24 : \
+ # Network interconnect device benchmark testing, RFC 2544
+ 198.18.0.0/15 : \
+ # Multicast addresses, RFC 3171
+ 224.0.0.0/4 : \
+ # Reserved for future use, RFC 1700 (page 4)
+ 240.0.0.0/4
Q0320: How can I arrange for all mail to \*user@some.domain*\ to be forwarded
transport could be:
==> local_delivery_mbx:
- driver = pipe
- command = /usr/local/bin/tmail $local_part
- user = exim
- current_directory = /
+ driver = pipe
+ command = /usr/local/bin/tmail $local_part
+ user = exim
+ current_directory = /
use_crlf
message_prefix =
do not block legitimate mail. With that proviso, you can do it using
something like this in an ACL:
-==> drop message = HELO doesn't look like a hostname
- log_message = Not a hostname
- condition = ${if match{$sender_helo_name} \
- {\N^[^.].*\.[^.]+$\N}{no}{yes}}
+==> drop message = HELO doesn't look like a hostname
+ log_message = Not a hostname
+ condition = ${if match{$sender_helo_name} \
+ {\N^[^.].*\.[^.]+$\N}{no}{yes}}
This means: Drop the HELO unless it contains a dot somewhere in the HELO
string, but the string may not begin or end with a dot. Thus, the
names, but if mail comes in for an upper case login name, it doesn't
get rewritten.
-==> *@my.domain ${lookup{$1}dbm{/usr/lib/exim/longforms}\
- {$value}fail}@my.domain bcfrtFT
+==> *@my.domain ${lookup{$1}dbm{/usr/lib/exim/longforms}\
+ {$value}fail}@my.domain bcfrtFT
The longforms database has entries of the form:
are rewriting. If you are rewriting recipient addresses for your local
domain, you can do:
-==> *@dom.ain ${lookup{$1}dbm{/wher/ever}{$value}{failaddr}} Ehq
+==> *@dom.ain ${lookup{$1}dbm{/wher/ever}{$value}{failaddr}} Ehq
and in your alias file put something like
-==> failaddr: :fail: Rewriting failed
+==> failaddr: :fail: Rewriting failed
This fails a single recipient - others are processed independently.
encrypt the user/site/leaf certificate. If this isn't acceptable,
you seem to be able to strip out the passphrase as follows:
-==> openssl rsa -in user.key -our user.key.new
- mv user.key.new
+==> openssl rsa -in user.key -our user.key.new
+ mv user.key.new
This should be done immediately after \(user.key)\ is created.
==> # Now System is up, Modify kernel parameters for max open etc.
==> if [ -f /proc/sys/kernel/file-max ]; then
- echo 16384 >> /proc/sys/kernel/file-max
+ echo 16384 >> /proc/sys/kernel/file-max
fi
if [ -f /proc/sys/kernel/inode-max ]; then
- echo 24576 >> /proc/sys/kernel/inode-max
+ echo 24576 >> /proc/sys/kernel/inode-max
fi
if [ -f /proc/sys/kernel/file-nr ]; then
- echo 2160 >> /proc/sys/kernel/file-nr
+ echo 2160 >> /proc/sys/kernel/file-nr
fi
By echoing the value you want for file-max to the file \(file-max)\ etc.,
git://git.exim.org / exim.git / blobdiff