Change log file for Exim from version 4.21
-------------------------------------------
+This document describes *changes* to previous versions, that might
+affect Exim's operation, with an unchanged configuration file. For new
+options, and new features, see the NewStuff file next to this ChangeLog.
+
+
+Exim version 4.89
+-------------------
+
+JH/01 Bug 1922: Support IDNA2008. This has slightly different conversion rules
+ than -2003 did; needs libidn2 in addition to libidn.
+
+JH/02 The path option on a pipe transport is now expanded before use.
+
+PP/01 GitHub PR 50: Do not call ldap_start_tls_s on ldapi:// connections.
+ Patch provided by "Björn", documentation fix added too.
+
+JH/03 Bug 2003: fix Proxy Protocol v2 handling: the address size field was
+ missing a wire-to-host endian conversion.
+
+JH/04 Bug 2004: fix CHUNKING in non-PIPELINEING mode. Chunk data following
+ close after a BDAT command line could be taken as a following command,
+ giving a synch failure. Fix by only checking for synch immediately
+ before acknowledging the chunk.
+
+
+Exim version 4.88
+-----------------
+
+JH/01 Use SIZE on MAIL FROM in a cutthrough connection, if the destination
+ supports it and a size is available (ie. the sending peer gave us one).
+
+JH/02 The obsolete acl condition "demime" is removed (finally, after ten
+ years of being deprecated). The replacements are the ACLs
+ acl_smtp_mime and acl_not_smtp_mime.
+
+JH/03 Upgrade security requirements imposed for hosts_try_dane: previously
+ a downgraded non-dane trust-anchor for the TLS connection (CA-style)
+ or even an in-clear connection were permitted. Now, if the host lookup
+ was dnssec and dane was requested then the host is only used if the
+ TLSA lookup succeeds and is dnssec. Further hosts (eg. lower priority
+ MXs) will be tried (for hosts_try_dane though not for hosts_require_dane)
+ if one fails this test.
+ This means that a poorly-configured remote DNS will make it incommunicado;
+ but it protects against a DNS-interception attack on it.
+
+JH/04 Bug 1810: make continued-use of an open smtp transport connection
+ non-noisy when a race steals the message being considered.
+
+JH/05 If main configuration option tls_certificate is unset, generate a
+ self-signed certificate for inbound TLS connections.
+
+JH/06 Bug 165: hide more cases of password exposure - this time in expansions
+ in rewrites and routers.
+
+JH/07 Retire gnutls_require_mac et.al. These were nonfunctional since 4.80
+ and logged a warning sing 4.83; now they are a configuration file error.
+
+JH/08 Bug 1836: Fix crash in VRFY handling when handed an unqualified name
+ (lacking @domain). Apply the same qualification processing as RCPT.
+
+JH/09 Bug 1804: Avoid writing msglog files when in -bh or -bhc mode.
+
+JH/10 Support ${sha256:} applied to a string (as well as the previous
+ certificate).
+
+JH/11 Cutthrough: avoid using the callout hints db on a verify callout when
+ a cutthrough deliver is pending, as we always want to make a connection.
+ This also avoids re-routing the message when later placing the cutthrough
+ connection after a verify cache hit.
+ Do not update it with the verify result either.
+
+JH/12 Cutthrough: disable when verify option success_on_redirect is used, and
+ when routing results in more than one destination address.
+
+JH/13 Cutthrough: expand transport dkim_domain option when testing for dkim
+ signing (which inhibits the cutthrough capability). Previously only
+ the presence of an option was tested; now an expansion evaluating as
+ empty is permissible (obviously it should depend only on data available
+ when the cutthrough connection is made).
+
+JH/14 Fix logging of errors under PIPELINING. Previously the log line giving
+ the relevant preceding SMTP command did not note the pipelining mode.
+
+JH/15 Fix counting of empty lines in $body_linecount and $message_linecount.
+ Previously they were not counted.
+
+JH/16 DANE: treat a TLSA lookup response having all non-TLSA RRs, the same
+ as one having no matching records. Previously we deferred the message
+ that needed the lookup.
+
+JH/17 Fakereject: previously logged as a normal message arrival "<="; now
+ distinguished as "(=".
+
+JH/18 Bug 1867: make the fail_defer_domains option on a dnslookup router work
+ for missing MX records. Previously it only worked for missing A records.
+
+JH/19 Bug 1850: support Radius libraries that return REJECT_RC.
+
+JH/20 Bug 1872: Ensure that acl_smtp_notquit is run when the connection drops
+ after the data-go-ahead and data-ack. Patch from Jason Betts.
+
+JH/21 Bug 1846: Send DMARC forensic reports for reject and quarantine results,
+ even for a "none" policy. Patch from Tony Meyer.
+
+JH/22 Fix continued use of a connection for further deliveries. If a port was
+ specified by a router, it must also match for the delivery to be
+ compatible.
+
+JH/23 Bug 1874: fix continued use of a connection for further deliveries.
+ When one of the recipients of a message was unsuitable for the connection
+ (has no matching addresses), we lost track of needing to mark it
+ deferred. As a result mail would be lost.
+
+JH/24 Bug 1832: Log EHLO response on getting conn-close response for HELO.
+
+JH/25 Decoding ACL controls is now done using a binary search; the source code
+ takes up less space and should be simpler to maintain. Merge the ACL
+ condition decode tables also, with similar effect.
+
+JH/26 Fix problem with one_time used on a redirect router which returned the
+ parent address unchanged. A retry would see the parent address marked as
+ delivered, so not attempt the (identical) child. As a result mail would
+ be lost.
+
+JH/27 Fix a possible security hole, wherein a process operating with the Exim
+ UID can gain a root shell. Credit to http://www.halfdog.net/ for
+ discovery and writeup. Ubuntu bug 1580454; no bug raised against Exim
+ itself :(
+
+JH/28 Enable {spool,log} filesystem space and inode checks as default.
+ Main config options check_{log,spool}_{inodes,space} are now
+ 100 inodes, 10MB unless set otherwise in the configuration.
+
+JH/29 Fix the connection_reject log selector to apply to the connect ACL.
+ Previously it only applied to the main-section connection policy
+ options.
+
+JH/30 Bug 1897: fix callouts connection fallback from TLS to cleartext.
+
+PP/01 Changed default Diffie-Hellman parameters to be Exim-specific, created
+ by me. Added RFC7919 DH primes as an alternative.
+
+PP/02 Unbreak build via pkg-config with new hash support when crypto headers
+ are not in the system include path.
+
+JH/31 Fix longstanding bug with aborted TLS server connection handling. Under
+ GnuTLS, when a session startup failed (eg because the client disconnected)
+ Exim did stdio operations after fclose. This was exposed by a recent
+ change which nulled out the file handle after the fclose.
+
+JH/32 Bug 1909: Fix OCSP proof verification for cases where the proof is
+ signed directly by the cert-signing cert, rather than an intermediate
+ OCSP-signing cert. This is the model used by LetsEncrypt.
+
+JH/33 Bug 1914: Ensure socket is nonblocking before draining after SMTP QUIT.
+
+HS/01 Fix leak in verify callout under GnuTLS, about 3MB per recipient on
+ an incoming connection.
+
+HS/02 Bug 1802: Do not half-close the connection after sending a request
+ to rspamd.
+
+HS/03 Use "auto" as the default EC curve parameter. For OpenSSL < 1.0.2
+ fallback to "prime256v1".
+
+JH/34 SECURITY: Use proper copy of DATA command in error message.
+ Could leak key material. Remotely exploitable. CVE-2016-9963.
+
+
+Exim version 4.87
+-----------------
+
+JH/01 Bug 1664: Disable OCSP for GnuTLS library versions at/before 3.3.16
+ and 3.4.4 - once the server is enabled to respond to an OCSP request
+ it does even when not requested, resulting in a stapling non-aware
+ client dropping the TLS connection.
+
+TF/01 Code cleanup: Overhaul the debug_selector and log_selector machinery to
+ support variable-length bit vectors. No functional change.
+
+TF/02 Improve the consistency of logging incoming and outgoing interfaces.
+ The I= interface field on outgoing lines is now after the H= remote
+ host field, same as incoming lines. There is a separate
+ outgoing_interface log selector which allows you to disable the
+ outgoing I= field.
+
+JH/02 Bug 728: Close logfiles after a daemon-process "exceptional" log write.
+ If not running log_selector +smtp_connection the mainlog would be held
+ open indefinitely after a "too many connections" event, including to a
+ deleted file after a log rotate. Leave the per net connection logging
+ leaving it open for efficiency as that will be quickly detected by the
+ check on the next write.
+
+HS/01 Bug 1671: Fix post transport crash.
+ Processing the wait-<transport> messages could crash the delivery
+ process if the message IDs didn't exist for some reason. When
+ using 'split_spool_directory=yes' the construction of the spool
+ file name failed already, exposing the same netto behaviour.
+
+JH/03 Bug 425: Capture substrings in $regex1, $regex2 etc from regex &
+ mime_regex ACL conditions.
+
+JH/04 Bug 1686: When compiled with EXPERIMENTAL_DSN_INFO: Add extra information
+ to DSN fail messages (bounces): remote IP, remote greeting, remote response
+ to HELO, local diagnostic string.
+
+JH/05 Downgrade message for a TLS-certificate-based authentication fail from
+ log line to debug. Even when configured with a tls authenticator many
+ client connections are expected to not authenticate in this way, so
+ an authenticate fail is not an error.
+
+HS/02 Add the Exim version string to the process info. This way exiwhat
+ gives some more detail about the running daemon.
+
+JH/06 Bug 1395: time-limit caching of DNS lookups, to the TTL value. This may
+ matter for fast-change records such as DNSBLs.
+
+JH/07 Bug 1678: Always record an interface option value, if set, as part of a
+ retry record, even if constant. There may be multiple transports with
+ different interface settings and the retry behaviour needs to be kept
+ distinct.
+
+JH/08 Bug 1586: exiqgrep now refuses to run if there are unexpected arguments.
+
+JH/09 Bug 1700: ignore space & tab embedded in base64 during decode.
+
+JH/10 Bug 840: fix log_defer_output option of pipe transport
+
+JH/11 Bug 830: use same host for all RCPTS of a message, even under
+ hosts_randomize. This matters a lot when combined with mua_wrapper.
+
+JH/12 Bug 1706: percent and underbar characters are no longer escaped by the
+ ${quote_pgsql:<string>} operator.
+
+JH/13 Bug 1708: avoid misaligned access in cached lookup.
+
+JH/14 Change header file name for freeradius-client. Relevant if compiling
+ with Radius support; from the Gentoo tree and checked under Fedora.
+
+JH/15 Bug 1712: Introduce $prdr_requested flag variable
+
+JH/16 Bug 1714: Permit an empty string as expansion result for transport
+ option transport_filter, meaning no filtering.
+
+JH/17 Bug 1713: Fix non-PDKIM_DEBUG build. Patch from Jasen Betts.
+
+JH/18 Bug 1709: When built with TLS support, the tls_advertise_hosts option now
+ defaults to "*" (all hosts). The variable is now available when not built
+ with TLS, default unset, mainly to enable keeping the testsuite sane.
+ If a server certificate is not supplied (via tls_certificate) an error is
+ logged, and clients will find TLS connections fail on startup. Presumably
+ they will retry in-clear.
+ Packagers of Exim are strongly encouraged to create a server certificate
+ at installation time.
+
+HS/03 Add -bP config_file as a synonym for -bP configure_file, for consistency
+ with the $config_file variable.
+
+JH/19 Two additional event types: msg:rcpt:defer and msg:rcpt:host:defer. Both
+ in transport context, after the attempt, and per-recipient. The latter type
+ is per host attempted. The event data is the error message, and the errno
+ information encodes the lookup type (A vs. MX) used for the (first) host,
+ and the trailing two digits of the smtp 4xx response.
+
+GF/01 Bug 1715: Fix for race condition in exicyclog, where exim could attempt
+ to write to mainlog (or rejectlog, paniclog) in the window between file
+ creation and permissions/ownership being changed. Particularly affects
+ installations where exicyclog is run as root, rather than exim user;
+ result is that the running daemon panics and dies.
+
+JH/20 Bug 1701: For MySQL lookups, support MySQL config file option group names.
+
+JH/21 Bug 1720: Add support for priority groups and weighted-random proxy
+ selection for the EXPERIMENTAL_SOCKS feature, via new per-proxy options
+ "pri" and "weight". Note that the previous implicit priority given by the
+ list order is no longer honoured.
+
+JH/22 Bugs 963, 1721: Fix some corner cases in message body canonicalization
+ for DKIM processing.
+
+JH/23 Move SOCKS5 support from Experimental to mainline, enabled for a build
+ by defining SUPPORT_SOCKS.
+
+JH/26 Move PROXY support from Experimental to mainline, enabled for a build
+ by defining SUPPORT_PROXY. Note that the proxy_required_hosts option
+ is renamed to hosts_proxy, and the proxy_{host,target}_{address,port}.
+ variables are renamed to proxy_{local,external}_{address,port}.
+
+JH/27 Move Internationalisation support from Experimental to mainline, enabled
+ for a build by defining SUPPORT_I18N
+
+JH/28 Bug 1745: Fix redis lookups to handle (quoted) spaces embedded in parts
+ of the query string, and make ${quote_redis:} do that quoting.
+
+JH/29 Move Events support from Experimental to mainline, enabled by default
+ and removable for a build by defining DISABLE_EVENT.
+
+JH/30 Updated DANE implementation code to current from Viktor Dukhovni.
+
+JH/31 Fix bug with hosts_connection_nolog and named-lists which were wrongly
+ cached by the daemon.
+
+JH/32 Move Redis support from Experimental to mainline, enabled for a build
+ by defining LOOKUP_REDIS. The libhiredis library is required.
+
+JH/33 Bug 1748: Permit ACL dnslists= condition in non-smtp ACLs if explicit
+ keys are given for lookup.
+
+JH/34 Bug 1192: replace the embedded copy of PolarSSL RSA routines in the DKIM
+ support, by using OpenSSL or GnuTLS library ones. This means DKIM is
+ only supported when built with TLS support. The PolarSSL SHA routines
+ are still used when the TLS library is too old for convenient support.
+
+JH/35 Require SINGLE_DH_USE by default in OpenSSL (main config option
+ openssl_options), for security. OpenSSL forces this from version 1.1.0
+ server-side so match that on older versions.
+
+JH/36 Bug 1778: longstanding bug in memory use by the ${run } expansion: A fresh
+ allocation for $value could be released as the expansion processing
+ concluded, but leaving the global pointer active for it.
+
+JH/37 Bug 1769: Permit a VRFY ACL to override the default 252 response,
+ and to use the domains and local_parts ACL conditions.
+
+JH/38 Fix cutthrough bug with body lines having a single dot. The dot was
+ incorrectly not doubled on cutthrough transmission, hence seen as a
+ body-termination at the receiving system - resulting in truncated mails.
+ Commonly the sender saw a TCP-level error, and retransmitted the message
+ via the normal store-and-forward channel. This could result in duplicates
+ received - but deduplicating mailstores were liable to retain only the
+ initial truncated version.
+
+JH/39 Bug 1781: Fix use of DKIM private-keys having trailing '=' in the base-64.
+
+JH/40 Fix crash in queryprogram router when compiled with EXPERIMENTAL_SRS.
+
+JH/41 Bug 1792: Fix selection of headers to sign for DKIM: bottom-up. While
+ we're in there, support oversigning also; bug 1309.
+
+JH/42 Bug 1796: Fix error logged on a malware scanner connection failure.
+
+HS/04 Add support for keep_environment and add_environment options.
+
+JH/43 Tidy coding issues detected by gcc --fsanitize=undefined. Some remain;
+ either intentional arithmetic overflow during PRNG, or testing config-
+ induced overflows.
+
+JH/44 Bug 1800: The combination of a -bhc commandline option and cutthrough
+ delivery resulted in actual delivery. Cancel cutthrough before DATA
+ stage.
+
+JH/45 Fix cutthrough, when connection not opened by verify and target hard-
+ rejects a recipient: pass the reject to the originator.
+
+JH/46 Multiple issues raised by Coverity. Some were obvious or plausible bugs.
+ Many were false-positives and ignorable, but it's worth fixing the
+ former class.
+
+JH/47 Fix build on HP-UX and older Solaris, which need (un)setenv now also
+ for the new environment-manipulation done at startup. Move the routines
+ from being local to tls.c to being global via the os.c file.
+
+JH/48 Bug 1807: Fix ${extract } for the numeric/3-string case. While preparsing
+ an extract embedded as result-arg for a map, the first arg for extract
+ is unavailable so we cannot tell if this is a numbered or keyed
+ extraction. Accept either.
+
+
+Exim version 4.86
+-----------------
+
+JH/01 Bug 1545: The smtp transport option "retry_include_ip_address" is now
+ expanded.
+
+JH/02 The smtp transport option "multi_domain" is now expanded.
+
+JH/03 The smtp transport now requests PRDR by default, if the server offers
+ it.
+
+JH/04 Certificate name checking on server certificates, when exim is a client,
+ is now done by default. The transport option tls_verify_cert_hostnames
+ can be used to disable this per-host. The build option
+ EXPERIMENTAL_CERTNAMES is withdrawn.
+
+JH/05 The value of the tls_verify_certificates smtp transport and main options
+ default to the word "system" to access the system default CA bundle.
+ For GnuTLS, only version 3.0.20 or later.
+
+JH/06 Verification of the server certificate for a TLS connection is now tried
+ (but not required) by default. The verification status is now logged by
+ default, for both outbound TLS and client-certificate supplying inbound
+ TLS connections
+
+JH/07 Changed the default rfc1413 lookup settings to disable calls. Few
+ sites use this now.
+
+JH/08 The EXPERIMENTAL_DSN compile option is no longer needed; all Delivery
+ Status Notification (bounce) messages are now MIME format per RFC 3464.
+ Support for RFC 3461 DSN options NOTIFY,ENVID,RET,ORCPT can be advertised
+ under the control of the dsn_advertise_hosts option, and routers may
+ have a dsn_lasthop option.
+
+JH/09 A timeout of 2 minutes is now applied to all malware scanner types by
+ default, modifiable by a malware= option. The list separator for
+ the options can now be changed in the usual way. Bug 68.
+
+JH/10 The smtp_receive_timeout main option is now expanded before use.
+
+JH/11 The incoming_interface log option now also enables logging of the
+ local interface on delivery outgoing connections.
+
+JH/12 The cutthrough-routing facility now supports multi-recipient mails,
+ if the interface and destination host and port all match.
+
+JH/13 Bug 344: The verify = reverse_host_lookup ACL condition now accepts a
+ /defer_ok option.
+
+JH/14 Bug 1573: The spam= ACL condition now additionally supports Rspamd.
+ Patch from Andrew Lewis.
+
+JH/15 Bug 670: The spamd_address main option (for the spam= ACL condition)
+ now supports optional time-restrictions, weighting, and priority
+ modifiers per server. Patch originally by <rommer@active.by>.
+
+JH/16 The spamd_address main option now supports a mixed list of local
+ and remote servers. Remote servers can be IPv6 addresses, and
+ specify a port-range.
+
+JH/17 Bug 68: The spamd_address main option now supports an optional
+ timeout value per server.
+
+JH/18 Bug 1581: Router and transport options headers_add/remove can
+ now have the list separator specified.
+
+JH/19 Bug 392: spamd_address, and clamd av_scanner, now support retry
+ option values.
+
+JH/20 Bug 1571: Ensure that $tls_in_peerdn is set, when verification fails
+ under OpenSSL.
+
+JH/21 Support for the A6 type of dns record is withdrawn.
+
+JH/22 Bug 608: The result of a QUIT or not-QUIT toplevel ACL now matters
+ rather than the verbs used.
+
+JH/23 Bug 1572: Increase limit on SMTP confirmation message copy size
+ from 255 to 1024 chars.
+
+JH/24 Verification callouts now attempt to use TLS by default.
+
+HS/01 DNSSEC options (dnssec_require_domains, dnssec_request_domains)
+ are generic router options now. The defaults didn't change.
+
+JH/25 Bug 466: Add RFC2322 support for MIME attachment filenames.
+ Original patch from Alexander Shikoff, worked over by JH.
+
+HS/02 Bug 1575: exigrep falls back to autodetection of compressed
+ files if ZCAT_COMMAND is not executable.
+
+JH/26 Bug 1539: Add timeout/retry options on dnsdb lookups.
+
+JH/27 Bug 286: Support SOA lookup in dnsdb lookups.
+
+JH/28 Bug 1588: Do not use the A lookup following an AAAA for setting the FQDN.
+ Normally benign, it bites when the pair was led to by a CNAME;
+ modern usage is to not canonicalize the domain to a CNAME target
+ (and we were inconsistent anyway for A-only vs AAAA+A).
+
+JH/29 Bug 1632: Removed the word "rejected" from line logged for ACL discards.
+
+JH/30 Check the forward DNS lookup for DNSSEC, in addition to the reverse,
+ when evaluating $sender_host_dnssec.
+
+JH/31 Check the HELO verification lookup for DNSSEC, adding new
+ $sender_helo_dnssec variable.
+
+JH/32 Bug 1397: Enable ECDHE on OpenSSL, just the NIST P-256 curve.
+
+JH/33 Bug 1346: Note MAIL cmd seen in -bS batch, to avoid smtp_no_mail log.
+
+JH/34 Bug 1648: Fix a memory leak seen with "mailq" and large queues.
+
+JH/35 Bug 1642: Fix support of $spam_ variables at delivery time. Was
+ documented as working, but never had. Support all but $spam_report.
+
+JH/36 Bug 1659: Guard checking of input smtp commands again pseudo-command
+ added for tls authenticator.
+
+HS/03 Add perl_taintmode main config option
+
+
+Exim version 4.85
+-----------------
+
+TL/01 When running the test suite, the README says that variables such as
+ no_msglog_check are global and can be placed anywhere in a specific
+ test's script, however it was observed that placement needed to be near
+ the beginning for it to behave that way. Changed the runtest perl
+ script to read through the entire script once to detect and set these
+ variables, reset to the beginning of the script, and then run through
+ the script parsing/test process like normal.
+
+TL/02 The BSD's have an arc4random API. One of the functions to induce
+ adding randomness was arc4random_stir(), but it has been removed in
+ OpenBSD 5.5. Detect this OpenBSD version and skip calling this
+ function when detected.
+
+JH/01 Expand the EXPERIMENTAL_TPDA feature. Several different events now
+ cause callback expansion.
+
+TL/03 Bugzilla 1518: Clarify "condition" processing in routers; that
+ syntax errors in an expansion can be treated as a string instead of
+ logging or causing an error, due to the internal use of bool_lax
+ instead of bool when processing it.
+
+JH/02 Add EXPERIMENTAL_DANE, allowing for using the DNS as trust-anchor for
+ server certificates when making smtp deliveries.
+
+JH/03 Support secondary-separator specifier for MX, SRV, TLSA lookups.
+
+JH/04 Add ${sort {list}{condition}{extractor}} expansion item.
+
+TL/04 Bugzilla 1216: Add -M (related messages) option to exigrep.
+
+TL/05 GitHub Issue 18: Adjust logic testing for true/false in redis lookups.
+ Merged patch from Sebastian Wiedenroth.
+
+JH/05 Fix results-pipe from transport process. Several recipients, combined
+ with certificate use, exposed issues where response data items split
+ over buffer boundaries were not parsed properly. This eventually
+ resulted in duplicates being sent. This issue only became common enough
+ to notice due to the introduction of connection certificate information,
+ the item size being so much larger. Found and fixed by Wolfgang Breyha.
+
+JH/06 Bug 1533: Fix truncation of items in headers_remove lists. A fixed
+ size buffer was used, resulting in syntax errors when an expansion
+ exceeded it.
+
+JH/07 Add support for directories of certificates when compiled with a GnuTLS
+ version 3.3.6 or later.
+
+JH/08 Rename the TPDA experimental facility to Event Actions. The #ifdef
+ is EXPERIMENTAL_EVENT, the main-configuration and transport options
+ both become "event_action", the variables become $event_name, $event_data
+ and $event_defer_errno. There is a new variable $verify_mode, usable in
+ routers, transports and related events. The tls:cert event is now also
+ raised for inbound connections, if the main configuration event_action
+ option is defined.
+
+TL/06 In test suite, disable OCSP for old versions of openssl which contained
+ early OCSP support, but no stapling (appears to be less than 1.0.0).
+
+JH/09 When compiled with OpenSSL and EXPERIMENTAL_CERTNAMES, the checks on
+ server certificate names available under the smtp transport option
+ "tls_verify_cert_hostname" now do not permit multi-component wildcard
+ matches.
+
+JH/10 Time-related extraction expansions from certificates now use the main
+ option "timezone" setting for output formatting, and are consistent
+ between OpenSSL and GnuTLS compilations. Bug 1541.
+
+JH/11 Fix a crash in mime ACL when meeting a zero-length, quoted or RFC2047-
+ encoded parameter in the incoming message. Bug 1558.
+
+JH/12 Bug 1527: Autogrow buffer used in reading spool files. Since they now
+ include certificate info, eximon was claiming there were spoolfile
+ syntax errors.
+
+JH/13 Bug 1521: Fix ldap lookup for single-attr request, multiple-attr return.
+
+JH/14 Log delivery-related information more consistently, using the sequence
+ "H=<name> [<ip>]" wherever possible.
+
+TL/07 Bug 1547: Omit RFCs from release. Draft and RFCs have licenses which
+ are problematic for Debian distribution, omit them from the release
+ tarball.
+
+JH/15 Updates and fixes to the EXPERIMENTAL_DSN feature.
+
+JH/16 Fix string representation of time values on 64bit time_t architectures.
+ Bug 1561.
+
+JH/17 Fix a null-indirection in certextract expansions when a nondefault
+ output list separator was used.
+
+
+Exim version 4.84
+-----------------
+TL/01 Bugzilla 1506: Re-add a 'return NULL' to silence complaints from static
+ checkers that were complaining about end of non-void function with no
+ return.
+
+JH/01 Bug 1513: Fix parsing of quoted parameter values in MIME headers.
+ This was a regression introduced in 4.83 by another bugfix.
+
+JH/02 Fix broken compilation when EXPERIMENTAL_DSN is enabled.
+
+TL/02 Bug 1509: Fix exipick for enhanced spoolfile specification used when
+ EXPERIMENTAL_DSN is enabled. Fix from Wolfgang Breyha.
Exim version 4.83
commandline after expansion, particularly in the case when an
unquoted variable expansion results in an empty value.
+JH/27 The TLS SNI feature was broken in 4.82. Fix it.
+
+PP/02 Fix internal collision of T_APL on systems which support RFC3123
+ by renaming away from it. Addresses GH issue 15, reported by
+ Jasper Wallace.
+
+JH/28 Fix parsing of MIME headers for parameters with quoted semicolons.
+
+TL/15 SECURITY: prevent double expansion in math comparison functions
+ (can expand unsanitized data). Not remotely exploitable.
+ CVE-2014-2972
+
Exim version 4.82
-----------------
advertises the facility. If the client requests PRDR a new
acl_data_smtp_prdr ACL is called once for each recipient, after
the body content is received and before the acl_smtp_data ACL.
- The client is controlled by bolth of: a hosts_try_prdr option
+ The client is controlled by both of: a hosts_try_prdr option
on the smtp transport, and the server advertisement.
Default client logging of deliveries and rejections involving
PRDR are flagged with the string "PRDR".
JH/15 AUTH support on callouts (and hence cutthrough-deliveries).
Bugzilla 321, 823.
-TF/04 Added udpsend ACL modifer and hexquote expansion operator
+TF/04 Added udpsend ACL modifier and hexquote expansion operator
PP/21 Fix eximon continuous updating with timestamped log-files.
Broken in a format-string cleanup in 4.80, missed when I repaired the
Analysis and variant patch by Todd Lyons.
NM/04 Bugzilla 1237 - fix cases where printf format usage not indicated
- Bug report from Lars Müller <lars@samba.org> (via SUSE),
+ Bug report from Lars Müller <lars@samba.org> (via SUSE),
Patch from Dirk Mueller <dmueller@suse.com>
PP/13 tls_peerdn now print-escaped for spool files.
diagnostics.
Report and patch from Dmitry Banschikov.
-PP/16 Removed "dont_insert_empty_fragments" fron "openssl_options".
+PP/16 Removed "dont_insert_empty_fragments" from "openssl_options".
Removed SSL_clear() after SSL_new() which led to protocol negotiation
failures. We appear to now support TLS1.1+ with Exim.
has clearer semantics. The /leaky, /strict, and /readonly update modes
are mutually exclusive. The update mode is no longer included in the
database key; it just determines when the database is updated. (This
- means that when you upgrde Exim will forget old rate measurements.)
+ means that when you upgrade Exim will forget old rate measurements.)
Exim now checks that the per_* options are used with an update mode that
makes sense for the current ACL. For example, when Exim is processing a
Exim version 4.75
-----------------
-NM/01 Workround for PCRE version dependency in version reporting
+NM/01 Workaround for PCRE version dependency in version reporting
Bugzilla 1073
TF/01 Update valgrind.h and memcheck.h to copies from valgrind-3.6.0.
variable declaration deep within a block. Bug and patch from
Dennis Davis.
-PP/15 lookups-Makefile IRIX compatibilty coercion.
+PP/15 lookups-Makefile IRIX compatibility coercion.
PP/16 Make DISABLE_DKIM build knob functional.
colons if the lookup type is iplsearch. This is not incompatible, because
previously such lookups could never work.
- The situation is now rather anomolous, since one *can* have colons in
+ The situation is now rather anomalous, since one *can* have colons in
ordinary lsearch keys. However, making the change in all cases is
incompatible and would probably break a number of configurations.
PH/20 Added hosts_avoid_pipelining to the smtp transport.
PH/21 Long custom messages for fakedefer and fakereject are now split up
- into multiline reponses in the same way that messages for "deny" and
+ into multiline responses in the same way that messages for "deny" and
other ACL rejections are.
PH/22 Applied Jori Hamalainen's speed-up changes and typo fixes to exigrep,
runs only) independently of the message's sender address. This meant
that, if the 4xx error was in fact related to the sender, a different
message to the same recipient with a different sender could confuse
- things. In particualar, this can happen when sending to a greylisting
+ things. In particular, this can happen when sending to a greylisting
server, but other circumstances could also provoke similar problems.
I have changed the default so that the retry time for these errors is now
based a combination of the sender and recipient addresses. This change
JJ/03 exipick.20061117.2, made header handling as similar to exim as possible
(added [br]h_ prefixes, implemented RFC2047 decoding. Fixed
- whitesspace changes from 4.64-PH/27
+ whitespace changes from 4.64-PH/27
JJ/04 exipick.20061117.2, fixed format and added $message_headers_raw to
match 4.64-PH/13
(a) Failures to set uid/gid, the current directory, or a process leader
in a subprocess such as that created by queryprogram now generate
- suitable debugging ouput when -d is set.
+ suitable debugging output when -d is set.
(b) The queryprogram router detects when it is not running as root,
outputs suitable debugging information if -d is set, and then runs
and most important:
o fixes a bug in processing the envelope test (when testing
- multiple envelope elements, the last element determinted the
+ multiple envelope elements, the last element determined the
result)
PH/10 Exim was violating RFC 3834 ("Recommendations for Automatic Responses to
Auto-submitted: auto-generated
in the messages that it generates (bounce messages and others, such as
- warnings). In the case of bounce messages for non-SMTP mesages, there was
+ warnings). In the case of bounce messages for non-SMTP messages, there was
also a typo: it was using "Auto_submitted" (underscore instead of
hyphen). Since every message generated by Exim is necessarily in response
to another message, thes have all been changed to:
PH/05 There's a shambles in IRIX6 - it defines EX_OK in unistd.h which conflicts
with the definition in sysexits.h (which is #included earlier).
Fortunately, Exim does not actually use EX_OK. The code used to try to
- preserve the sysexits.h value, by assumimg that macro definitions were
+ preserve the sysexits.h value, by assuming that macro definitions were
scanned for macro replacements. I have been disabused of this notion,
so now the code just undefines EX_OK before #including unistd.h.
SC/01 Eximstats: added -xls and the ability to specify output files
(patch written by Frank Heydlauf).
-SC/02 Eximstats: use FileHandles for outputing results.
+SC/02 Eximstats: use FileHandles for outputting results.
SC/03 Eximstats: allow any combination of xls, txt, and html output.
58. When a "warn" ACL statement has a log_message modifier, the message is
remembered, and not repeated. This is to avoid a lot of repetition when a
message has many recipients that cause the same warning to be written.
- Howewer, Exim was preserving the list of already written lines for an
+ However, Exim was preserving the list of already written lines for an
entire SMTP session, which doesn't seem right. The memory is now reset if a
new message is started.
the list was checked. (An example that provoked this was putting <; in the
middle of a list instead of at the start.) If this happened during a DATA
ACL check, a -D file could be left lying around. This kind of configuration
- error no longer causes Exim to die; instead it causes a defer errror. The
+ error no longer causes Exim to die; instead it causes a defer error. The
incident is still logged to the main and panic logs.
74. Buglet left over from Exim 3 conversion. The message "too many messages
systems (e.g. Solaris), it also passes back the IP address string as the
"host name". However, on others (e.g. Linux), it passes back an empty
string. Exim wasn't checking for this, and was changing the host name to an
- empty string, assuming it had been canonicized.
+ empty string, assuming it had been canonicalized.
5. Although rare, it is permitted to have more than one PTR record for a given
IP address. I thought that gethostbyaddr() or getipnodebyaddr() always gave
13. The install script calls Exim with "-C /dev/null" in order to find the
version number. If ALT_CONFIG_PREFIX was set, this caused an error message
- to be output. Howeve, since Exim outputs its version number before the
+ to be output. However, since Exim outputs its version number before the
error, it didn't break the script. It just looked ugly. I fixed this by
always allowing "-C /dev/null" if the caller is root.
34. Testing for a connection timeout using "timeout_connect" in the retry rules
did not work. The code looks as if it has *never* worked, though it appears
- to have been documented since at least releast 1.62. I have made it work.
+ to have been documented since at least release 1.62. I have made it work.
35. The "timeout_DNS" error in retry rules, also documented since at least
1.62, also never worked. As it isn't clear exactly what this means, and
16. Check for letters, digits, hyphens, and dots in the names of dnslist
domains, and warn by logging if others are found.
-17. At least on BSD, alignment is not guarenteed for the array of ifreq's
+17. At least on BSD, alignment is not guaranteed for the array of ifreq's
returned from GIFCONF when Exim is trying to find the list of interfaces on
a host. The code in os.c has been modified to copy each ifreq to an aligned
structure in all cases.
24. Ignore Sendmail's -Ooption=value command line item.
25. When execve() failed while trying to run a command in a pipe transport,
- Exim was returning EX_UNAVAILBLE (69) from the subprocess. However, this
+ Exim was returning EX_UNAVAILABLE (69) from the subprocess. However, this
could be confused with a return value of 69 from the command itself. This
has been changed to 127, the value the shell returns if it is asked to run
a non-existent command. The wording for the related log line suggests a
47. Change 50 for 4.20 was a heap of junk. I don't know what I was thinking
when I implemented it. It didn't allow for the fact that some option values
- may legitimatetly be negative (e.g. size_addition), and it didn't even do
+ may legitimately be negative (e.g. size_addition), and it didn't even do
the right test for positive values.
48. Domain names in DNS records are case-independent. Exim always looks them up
git://git.exim.org / exim.git / blobdiff