* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2013 */
+/* Copyright (c) University of Cambridge 1995 - 2016 */
/* See the file NOTICE for conditions of use and distribution. */
/* Functions for handling an incoming SMTP call. */
#include "exim.h"
+#include <assert.h>
/* Initialize for TCP wrappers if so configured. It appears that the macro
/* Size of buffer for reading SMTP commands. We used to use 512, as defined
by RFC 821. However, RFC 1869 specifies that this must be increased for SMTP
commands that accept arguments, and this in particular applies to AUTH, where
-the data can be quite long. More recently this value was 2048 in Exim;
+the data can be quite long. More recently this value was 2048 in Exim;
however, RFC 4954 (circa 2007) recommends 12288 bytes to handle AUTH. Clients
-such as Thunderbird will send an AUTH with an initial-response for GSSAPI.
-The maximum size of a Kerberos ticket under Windows 2003 is 12000 bytes, and
+such as Thunderbird will send an AUTH with an initial-response for GSSAPI.
+The maximum size of a Kerberos ticket under Windows 2003 is 12000 bytes, and
we need room to handle large base64-encoded AUTHs for GSSAPI.
*/
VRFY_CMD, EXPN_CMD, NOOP_CMD, /* RFC as requiring synchronization */
ETRN_CMD, /* This by analogy with TURN from the RFC */
STARTTLS_CMD, /* Required by the STARTTLS RFC */
+ TLS_AUTH_CMD, /* auto-command at start of SSL */
/* This is a dummy to identify the non-sync commands when pipelining */
QUIT_CMD, HELP_CMD,
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
PROXY_FAIL_IGNORE_CMD,
#endif
#ifdef SUPPORT_TLS
static BOOL tls_advertised;
#endif
+static BOOL dsn_advertised;
static BOOL esmtp;
static BOOL helo_required = FALSE;
static BOOL helo_verify = FALSE;
static BOOL rcpt_in_progress;
static int nonmail_command_count;
static BOOL smtp_exit_function_called = 0;
+#ifdef SUPPORT_I18N
+static BOOL smtputf8_advertised;
+#endif
static int synprot_error_count;
static int unknown_command_count;
static int sync_cmd_limit;
forced TRUE, to allow for the re-authentication that can happen at that point.
QUIT is also "falsely" labelled as a mail command so that it doesn't up the
-count of non-mail commands and possibly provoke an error. */
+count of non-mail commands and possibly provoke an error.
+
+tls_auth is a pseudo-command, never expected in input. It is activated
+on TLS startup and looks for a tls authenticator. */
static smtp_cmd_list cmd_list[] = {
+ /* name len cmd has_arg is_mail_cmd */
+
{ "rset", sizeof("rset")-1, RSET_CMD, FALSE, FALSE }, /* First */
{ "helo", sizeof("helo")-1, HELO_CMD, TRUE, FALSE },
{ "ehlo", sizeof("ehlo")-1, EHLO_CMD, TRUE, FALSE },
{ "auth", sizeof("auth")-1, AUTH_CMD, TRUE, TRUE },
#ifdef SUPPORT_TLS
{ "starttls", sizeof("starttls")-1, STARTTLS_CMD, FALSE, FALSE },
+ { "tls_auth", 0, TLS_AUTH_CMD, FALSE, TRUE },
#endif
/* If you change anything above here, also fix the definitions below. */
#define CMD_LIST_EHLO 2
#define CMD_LIST_AUTH 3
#define CMD_LIST_STARTTLS 4
+#define CMD_LIST_TLS_AUTH 5
/* This list of names is used for performing the smtp_no_mail logging action.
It must be kept in step with the SCH_xxx enumerations. */
US"HELP", US"MAIL", US"NOOP", US"QUIT", US"RCPT", US"RSET", US"STARTTLS",
US"VRFY" };
-static uschar *protocols[] = {
+static uschar *protocols_local[] = {
US"local-smtp", /* HELO */
US"local-smtps", /* The rare case EHLO->STARTTLS->HELO */
US"local-esmtp", /* EHLO */
US"local-esmtpa", /* EHLO->AUTH */
US"local-esmtpsa" /* EHLO->STARTTLS->EHLO->AUTH */
};
+static uschar *protocols[] = {
+ US"smtp", /* HELO */
+ US"smtps", /* The rare case EHLO->STARTTLS->HELO */
+ US"esmtp", /* EHLO */
+ US"esmtps", /* EHLO->STARTTLS->EHLO */
+ US"esmtpa", /* EHLO->AUTH */
+ US"esmtpsa" /* EHLO->STARTTLS->EHLO->AUTH */
+ };
#define pnormal 0
#define pextend 2
#define pcrpted 1 /* added to pextend or pnormal */
#define pauthed 2 /* added to pextend */
-#define pnlocal 6 /* offset to remove "local" */
/* Sanity check and validate optional args to MAIL FROM: envelope */
enum {
+ ENV_MAIL_OPT_NULL,
ENV_MAIL_OPT_SIZE, ENV_MAIL_OPT_BODY, ENV_MAIL_OPT_AUTH,
-#ifdef EXPERIMENTAL_PRDR
+#ifndef DISABLE_PRDR
ENV_MAIL_OPT_PRDR,
#endif
- ENV_MAIL_OPT_NULL
+ ENV_MAIL_OPT_RET, ENV_MAIL_OPT_ENVID,
+#ifdef SUPPORT_I18N
+ ENV_MAIL_OPT_UTF8,
+#endif
};
typedef struct {
uschar * name; /* option requested during MAIL cmd */
{ US"SIZE", ENV_MAIL_OPT_SIZE, TRUE },
{ US"BODY", ENV_MAIL_OPT_BODY, TRUE },
{ US"AUTH", ENV_MAIL_OPT_AUTH, TRUE },
-#ifdef EXPERIMENTAL_PRDR
+#ifndef DISABLE_PRDR
{ US"PRDR", ENV_MAIL_OPT_PRDR, FALSE },
#endif
- { US"NULL", ENV_MAIL_OPT_NULL, FALSE }
+ { US"RET", ENV_MAIL_OPT_RET, TRUE },
+ { US"ENVID", ENV_MAIL_OPT_ENVID, TRUE },
+#ifdef SUPPORT_I18N
+ { US"SMTPUTF8",ENV_MAIL_OPT_UTF8, FALSE }, /* rfc6531 */
+#endif
+ /* keep this the last entry */
+ { US"NULL", ENV_MAIL_OPT_NULL, FALSE },
};
/* When reading SMTP from a remote host, we have to use our own versions of the
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
/*************************************************
* Restore socket timeout to previous value *
*************************************************/
/* Cannot configure local connection as a proxy inbound */
if (sender_host_address == NULL) return proxy_session;
-rc = verify_check_this_host(&proxy_required_hosts, NULL, NULL,
+rc = verify_check_this_host(CUSS &hosts_proxy, NULL, NULL,
sender_host_address, NULL);
if (rc == OK)
{
}
-/*************************************************
-* Flush waiting input string *
-*************************************************/
-static void
-flush_input()
-{
-int rc;
-
-rc = smtp_getc();
-while (rc != '\n') /* End of input string */
- {
- rc = smtp_getc();
- }
-}
-
-
/*************************************************
* Setup host for proxy protocol *
*************************************************/
} v1;
struct {
uschar sig[12];
- uschar ver;
- uschar cmd;
- uschar fam;
- uschar len;
+ uint8_t ver_cmd;
+ uint8_t fam;
+ uint16_t len;
union {
struct { /* TCP/UDP over IPv4, len = 12 */
uint32_t src_addr;
} v2;
} hdr;
+/* Temp variables used in PPv2 address:port parsing */
+uint16_t tmpport;
+char tmpip[INET_ADDRSTRLEN];
+struct sockaddr_in tmpaddr;
+char tmpip6[INET6_ADDRSTRLEN];
+struct sockaddr_in6 tmpaddr6;
+
+int get_ok = 0;
int size, ret, fd;
-uschar *tmpip;
-const char v2sig[13] = "\x0D\x0A\x0D\x0A\x00\x0D\x0A\x51\x55\x49\x54\x0A\x02";
+const char v2sig[12] = "\x0D\x0A\x0D\x0A\x00\x0D\x0A\x51\x55\x49\x54\x0A";
uschar *iptype; /* To display debug info */
struct timeval tv;
-int get_ok = 0;
socklen_t vslen = 0;
struct timeval tvtmp;
do
{
- ret = recv(fd, &hdr, sizeof(hdr), MSG_PEEK);
+ /* The inbound host was declared to be a Proxy Protocol host, so
+ don't do a PEEK into the data, actually slurp it up. */
+ ret = recv(fd, &hdr, sizeof(hdr), 0);
}
while (ret == -1 && errno == EINTR);
}
if (ret >= 16 &&
- memcmp(&hdr.v2, v2sig, 13) == 0)
+ memcmp(&hdr.v2, v2sig, 12) == 0)
{
+ uint8_t ver, cmd;
+
+ /* May 2014: haproxy combined the version and command into one byte to
+ allow two full bytes for the length field in order to proxy SSL
+ connections. SSL Proxy is not supported in this version of Exim, but
+ must still seperate values here. */
+ ver = (hdr.v2.ver_cmd & 0xf0) >> 4;
+ cmd = (hdr.v2.ver_cmd & 0x0f);
+
+ if (ver != 0x02)
+ {
+ DEBUG(D_receive) debug_printf("Invalid Proxy Protocol version: %d\n", ver);
+ goto proxyfail;
+ }
DEBUG(D_receive) debug_printf("Detected PROXYv2 header\n");
+ /* The v2 header will always be 16 bytes per the spec. */
size = 16 + hdr.v2.len;
if (ret < size)
{
- DEBUG(D_receive) debug_printf("Truncated or too large PROXYv2 header\n");
+ DEBUG(D_receive) debug_printf("Truncated or too large PROXYv2 header (%d/%d)\n",
+ ret, size);
goto proxyfail;
}
- switch (hdr.v2.cmd)
+ switch (cmd)
{
case 0x01: /* PROXY command */
switch (hdr.v2.fam)
{
- case 0x11: /* TCPv4 */
- tmpip = string_sprintf("%s", hdr.v2.addr.ip4.src_addr);
- if (!string_is_ip_address(tmpip,NULL))
+ case 0x11: /* TCPv4 address type */
+ iptype = US"IPv4";
+ tmpaddr.sin_addr.s_addr = hdr.v2.addr.ip4.src_addr;
+ inet_ntop(AF_INET, &(tmpaddr.sin_addr), (char *)&tmpip, sizeof(tmpip));
+ if (!string_is_ip_address(US tmpip,NULL))
+ {
+ DEBUG(D_receive) debug_printf("Invalid %s source IP\n", iptype);
+ return ERRNO_PROXYFAIL;
+ }
+ proxy_local_address = sender_host_address;
+ sender_host_address = string_copy(US tmpip);
+ tmpport = ntohs(hdr.v2.addr.ip4.src_port);
+ proxy_local_port = sender_host_port;
+ sender_host_port = tmpport;
+ /* Save dest ip/port */
+ tmpaddr.sin_addr.s_addr = hdr.v2.addr.ip4.dst_addr;
+ inet_ntop(AF_INET, &(tmpaddr.sin_addr), (char *)&tmpip, sizeof(tmpip));
+ if (!string_is_ip_address(US tmpip,NULL))
+ {
+ DEBUG(D_receive) debug_printf("Invalid %s dest port\n", iptype);
return ERRNO_PROXYFAIL;
- sender_host_address = tmpip;
- sender_host_port = hdr.v2.addr.ip4.src_port;
+ }
+ proxy_external_address = string_copy(US tmpip);
+ tmpport = ntohs(hdr.v2.addr.ip4.dst_port);
+ proxy_external_port = tmpport;
goto done;
- case 0x21: /* TCPv6 */
- tmpip = string_sprintf("%s", hdr.v2.addr.ip6.src_addr);
- if (!string_is_ip_address(tmpip,NULL))
+ case 0x21: /* TCPv6 address type */
+ iptype = US"IPv6";
+ memmove(tmpaddr6.sin6_addr.s6_addr, hdr.v2.addr.ip6.src_addr, 16);
+ inet_ntop(AF_INET6, &(tmpaddr6.sin6_addr), (char *)&tmpip6, sizeof(tmpip6));
+ if (!string_is_ip_address(US tmpip6,NULL))
+ {
+ DEBUG(D_receive) debug_printf("Invalid %s source IP\n", iptype);
+ return ERRNO_PROXYFAIL;
+ }
+ proxy_local_address = sender_host_address;
+ sender_host_address = string_copy(US tmpip6);
+ tmpport = ntohs(hdr.v2.addr.ip6.src_port);
+ proxy_local_port = sender_host_port;
+ sender_host_port = tmpport;
+ /* Save dest ip/port */
+ memmove(tmpaddr6.sin6_addr.s6_addr, hdr.v2.addr.ip6.dst_addr, 16);
+ inet_ntop(AF_INET6, &(tmpaddr6.sin6_addr), (char *)&tmpip6, sizeof(tmpip6));
+ if (!string_is_ip_address(US tmpip6,NULL))
+ {
+ DEBUG(D_receive) debug_printf("Invalid %s dest port\n", iptype);
return ERRNO_PROXYFAIL;
- sender_host_address = tmpip;
- sender_host_port = hdr.v2.addr.ip6.src_port;
+ }
+ proxy_external_address = string_copy(US tmpip6);
+ tmpport = ntohs(hdr.v2.addr.ip6.dst_port);
+ proxy_external_port = tmpport;
goto done;
+ default:
+ DEBUG(D_receive)
+ debug_printf("Unsupported PROXYv2 connection type: 0x%02x\n",
+ hdr.v2.fam);
+ goto proxyfail;
}
/* Unsupported protocol, keep local connection address */
break;
/* Keep local connection address for LOCAL */
break;
default:
- DEBUG(D_receive) debug_printf("Unsupported PROXYv2 command\n");
+ DEBUG(D_receive)
+ debug_printf("Unsupported PROXYv2 command: 0x%x\n", cmd);
goto proxyfail;
}
}
debug_printf("Proxied src arg is not an %s address\n", iptype);
goto proxyfail;
}
- proxy_host_address = sender_host_address;
+ proxy_local_address = sender_host_address;
sender_host_address = p;
p = sp + 1;
if ((sp = Ustrchr(p, ' ')) == NULL)
debug_printf("Proxy dest arg is not an %s address\n", iptype);
goto proxyfail;
}
- /* Should save dest ip somewhere? */
+ proxy_external_address = p;
p = sp + 1;
if ((sp = Ustrchr(p, ' ')) == NULL)
{
debug_printf("Proxied src port '%s' not an integer\n", p);
goto proxyfail;
}
- proxy_host_port = sender_host_port;
+ proxy_local_port = sender_host_port;
sender_host_port = tmp_port;
p = sp + 1;
if ((sp = Ustrchr(p, '\0')) == NULL)
debug_printf("Proxy dest port '%s' not an integer\n", p);
goto proxyfail;
}
- /* Should save dest port somewhere? */
+ proxy_external_port = tmp_port;
/* Already checked for /r /n above. Good V1 header received. */
goto done;
}
else
{
/* Wrong protocol */
- DEBUG(D_receive) debug_printf("Wrong proxy protocol specified\n");
+ DEBUG(D_receive) debug_printf("Invalid proxy protocol version negotiation\n");
goto proxyfail;
}
proxyfail:
restore_socket_timeout(fd, get_ok, tvtmp, vslen);
/* Don't flush any potential buffer contents. Any input should cause a
-synchronization failure or we just don't want to speak SMTP to them */
+ synchronization failure */
return FALSE;
done:
restore_socket_timeout(fd, get_ok, tvtmp, vslen);
-flush_input();
DEBUG(D_receive)
- debug_printf("Valid %s sender from Proxy Protocol header\n",
- iptype);
+ debug_printf("Valid %s sender from Proxy Protocol header\n", iptype);
return proxy_session;
}
#endif
for (p = cmd_list; p < cmd_list_end; p++)
{
- #ifdef EXPERIMENTAL_PROXY
+ #ifdef SUPPORT_PROXY
/* Only allow QUIT command if Proxy Protocol parsing failed */
if (proxy_session && proxy_session_failed)
{
continue;
}
#endif
- if (strncmpic(smtp_cmd_buffer, US p->name, p->len) == 0 &&
- (smtp_cmd_buffer[p->len-1] == ':' || /* "mail from:" or "rcpt to:" */
- smtp_cmd_buffer[p->len] == 0 ||
- smtp_cmd_buffer[p->len] == ' '))
+ if ( p->len
+ && strncmpic(smtp_cmd_buffer, US p->name, p->len) == 0
+ && ( smtp_cmd_buffer[p->len-1] == ':' /* "mail from:" or "rcpt to:" */
+ || smtp_cmd_buffer[p->len] == 0
+ || smtp_cmd_buffer[p->len] == ' '
+ ) )
{
if (smtp_inptr < smtp_inend && /* Outstanding input */
p->cmd < sync_cmd_limit && /* Command should sync */
}
}
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
/* Only allow QUIT command if Proxy Protocol parsing failed */
if (proxy_session && proxy_session_failed)
return PROXY_FAIL_IGNORE_CMD;
if (is_inetd)
return string_sprintf("SMTP connection from %s (via inetd)", hostname);
-if ((log_extra_selector & LX_incoming_interface) != 0 &&
- interface_address != NULL)
+if (LOGGING(incoming_interface) && interface_address != NULL)
return string_sprintf("SMTP connection from %s I=[%s]:%d", hostname,
interface_address, interface_port);
+#ifdef SUPPORT_TLS
+/* Append TLS-related information to a log line
+
+Arguments:
+ s String under construction: allocated string to extend, or NULL
+ sizep Pointer to current allocation size (update on return), or NULL
+ ptrp Pointer to index for new entries in string (update on return), or NULL
+
+Returns: Allocated string or NULL
+*/
+static uschar *
+s_tlslog(uschar * s, int * sizep, int * ptrp)
+{
+ int size = sizep ? *sizep : 0;
+ int ptr = ptrp ? *ptrp : 0;
+
+ if (LOGGING(tls_cipher) && tls_in.cipher != NULL)
+ s = string_append(s, &size, &ptr, 2, US" X=", tls_in.cipher);
+ if (LOGGING(tls_certificate_verified) && tls_in.cipher != NULL)
+ s = string_append(s, &size, &ptr, 2, US" CV=",
+ tls_in.certificate_verified? "yes":"no");
+ if (LOGGING(tls_peerdn) && tls_in.peerdn != NULL)
+ s = string_append(s, &size, &ptr, 3, US" DN=\"",
+ string_printing(tls_in.peerdn), US"\"");
+ if (LOGGING(tls_sni) && tls_in.sni != NULL)
+ s = string_append(s, &size, &ptr, 3, US" SNI=\"",
+ string_printing(tls_in.sni), US"\"");
+
+ if (s)
+ {
+ s[ptr] = '\0';
+ if (sizep) *sizep = size;
+ if (ptrp) *ptrp = ptr;
+ }
+ return s;
+}
+#endif
+
/*************************************************
* Log lack of MAIL if so configured *
*************************************************/
int size, ptr, i;
uschar *s, *sep;
-if (smtp_mailcmd_count > 0 || (log_extra_selector & LX_smtp_no_mail) == 0)
+if (smtp_mailcmd_count > 0 || !LOGGING(smtp_no_mail))
return;
s = NULL;
}
#ifdef SUPPORT_TLS
-if ((log_extra_selector & LX_tls_cipher) != 0 && tls_in.cipher != NULL)
- s = string_append(s, &size, &ptr, 2, US" X=", tls_in.cipher);
-if ((log_extra_selector & LX_tls_certificate_verified) != 0 &&
- tls_in.cipher != NULL)
- s = string_append(s, &size, &ptr, 2, US" CV=",
- tls_in.certificate_verified? "yes":"no");
-if ((log_extra_selector & LX_tls_peerdn) != 0 && tls_in.peerdn != NULL)
- s = string_append(s, &size, &ptr, 3, US" DN=\"",
- string_printing(tls_in.peerdn), US"\"");
-if ((log_extra_selector & LX_tls_sni) != 0 && tls_in.sni != NULL)
- s = string_append(s, &size, &ptr, 3, US" SNI=\"",
- string_printing(tls_in.sni), US"\"");
+s = s_tlslog(s, &size, &ptr);
#endif
sep = (smtp_connection_had[SMTP_HBUFF_SIZE-1] != SCH_NONE)?
if (s != NULL) s[ptr] = 0; else s = US"";
log_write(0, LOG_MAIN, "no MAIL in SMTP connection from %s D=%s%s",
host_and_ident(FALSE),
- readconf_printtime(time(NULL) - smtp_connection_start), s);
+ readconf_printtime( (int) ((long)time(NULL) - (long)smtp_connection_start)),
+ s);
}
sender_verified_list = NULL; /* No senders verified */
memset(sender_address_cache, 0, sizeof(sender_address_cache));
memset(sender_domain_cache, 0, sizeof(sender_domain_cache));
+
+#ifndef DISABLE_PRDR
+prdr_requested = FALSE;
+#endif
+
+/* Reset the DSN flags */
+dsn_ret = 0;
+dsn_envid = NULL;
+
authenticated_sender = NULL;
#ifdef EXPERIMENTAL_BRIGHTMAIL
bmi_run = 0;
spf_result = NULL;
spf_smtp_comment = NULL;
#endif
+#ifdef SUPPORT_I18N
+message_smtputf8 = FALSE;
+#endif
body_linecount = body_zerocount = 0;
sender_rate = sender_rate_limit = sender_rate_period = NULL;
it is the canonical extracted address which is all that is kept. */
case MAIL_CMD:
+ smtp_mailcmd_count++; /* Count for no-mail log */
if (sender_address != NULL)
/* The function moan_smtp_batch() does not return. */
moan_smtp_batch(smtp_cmd_buffer, "503 Sender already given");
sync_cmd_limit = NON_SYNC_CMD_NON_PIPELINING;
smtp_exit_function_called = FALSE; /* For avoiding loop in not-quit exit */
-memset(sender_host_cache, 0, sizeof(sender_host_cache));
-
/* If receiving by -bs from a trusted user, or testing with -bh, we allow
authentication settings from -oMaa to remain in force. */
#ifdef SUPPORT_TLS
tls_in.cipher = tls_in.peerdn = NULL;
+tls_in.ourcert = tls_in.peercert = NULL;
+tls_in.sni = NULL;
+tls_in.ocsp = OCSP_NOT_REQ;
tls_advertised = FALSE;
#endif
+dsn_advertised = FALSE;
+#ifdef SUPPORT_I18N
+smtputf8_advertised = FALSE;
+#endif
/* Reset ACL connection variables */
else
received_protocol =
- protocols[pnormal] + ((sender_host_address != NULL)? pnlocal : 0);
+ (sender_host_address ? protocols : protocols_local) [pnormal];
/* Set up the buffer for inputting using direct read() calls, and arrange to
call the local functions instead of the standard C ones. */
set_process_info("handling incoming connection from %s",
host_and_ident(FALSE));
+ /* Expand smtp_receive_timeout, if needed */
+
+ if (smtp_receive_timeout_s)
+ {
+ uschar * exp;
+ if ( !(exp = expand_string(smtp_receive_timeout_s))
+ || !(*exp)
+ || (smtp_receive_timeout = readconf_readtime(exp, 0, FALSE)) < 0
+ )
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "bad value for smtp_receive_timeout: '%s'", exp ? exp : US"");
+ }
+
/* Start up TLS if tls_on_connect is set. This is for supporting the legacy
smtps port for use with older style SSL MTAs. */
if (smtp_batched_input) return TRUE;
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
/* If valid Proxy Protocol source is connecting, set up session.
* Failure will not allow any SMTP function other than QUIT. */
proxy_session = FALSE;
esc = US""; /* Default extended status code */
esclen = 0; /* Length of esc */
-if (user_msg == NULL)
+if (!user_msg)
{
- s = expand_string(smtp_banner);
- if (s == NULL)
+ if (!(s = expand_string(smtp_banner)))
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Expansion of \"%s\" (smtp_banner) "
"failed: %s", smtp_banner, expand_string_message);
}
{
int codelen = 3;
s = user_msg;
- smtp_message_code(&code, &codelen, &s, NULL);
+ smtp_message_code(&code, &codelen, &s, NULL, TRUE);
if (codelen > 4)
{
esc = code + 4;
{
int len;
uschar *linebreak = Ustrchr(p, '\n');
- ss = string_cat(ss, &size, &ptr, code, 3);
+ ss = string_catn(ss, &size, &ptr, code, 3);
if (linebreak == NULL)
{
len = Ustrlen(p);
- ss = string_cat(ss, &size, &ptr, US" ", 1);
+ ss = string_catn(ss, &size, &ptr, US" ", 1);
}
else
{
len = linebreak - p;
- ss = string_cat(ss, &size, &ptr, US"-", 1);
+ ss = string_catn(ss, &size, &ptr, US"-", 1);
}
- ss = string_cat(ss, &size, &ptr, esc, esclen);
- ss = string_cat(ss, &size, &ptr, p, len);
- ss = string_cat(ss, &size, &ptr, US"\r\n", 2);
+ ss = string_catn(ss, &size, &ptr, esc, esclen);
+ ss = string_catn(ss, &size, &ptr, p, len);
+ ss = string_catn(ss, &size, &ptr, US"\r\n", 2);
p += len;
if (linebreak != NULL) p++;
}
yield = 1;
log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
"syntax or protocol errors (last command was \"%s\")",
- host_and_ident(FALSE), smtp_cmd_buffer);
+ host_and_ident(FALSE), string_printing(smtp_cmd_buffer));
}
if (code > 0)
incomplete_transaction_log(uschar *what)
{
if (sender_address == NULL || /* No transaction in progress */
- (log_write_selector & L_smtp_incomplete_transaction) == 0 /* Not logging */
- ) return;
+ !LOGGING(smtp_incomplete_transaction))
+ return;
/* Build list of recipients for logging */
codelen length of smtp code; if > 4 there's an ESC
msg message text
log_msg optional log message, to be adjusted with the new SMTP code
+ check_valid if true, verify the response code
Returns: nothing
*/
void
-smtp_message_code(uschar **code, int *codelen, uschar **msg, uschar **log_msg)
+smtp_message_code(uschar **code, int *codelen, uschar **msg, uschar **log_msg,
+ BOOL check_valid)
{
int n;
int ovector[3];
-if (msg == NULL || *msg == NULL) return;
+if (!msg || !*msg) return;
-n = pcre_exec(regex_smtp_code, NULL, CS *msg, Ustrlen(*msg), 0,
- PCRE_EOPT, ovector, sizeof(ovector)/sizeof(int));
-if (n < 0) return;
+if ((n = pcre_exec(regex_smtp_code, NULL, CS *msg, Ustrlen(*msg), 0,
+ PCRE_EOPT, ovector, sizeof(ovector)/sizeof(int))) < 0) return;
-if ((*msg)[0] != (*code)[0])
+if (check_valid && (*msg)[0] != (*code)[0])
{
log_write(0, LOG_MAIN|LOG_PANIC, "configured error code starts with "
"incorrect digit (expected %c) in \"%s\"", (*code)[0], *msg);
(aka RFC 2821) has concluded that the response should be 252 in the disabled
state, because there are broken clients that try VRFY before RCPT. A 5xx
response should be given only when the address is positively known to be
-undeliverable. Sigh. Also, for ETRN, 458 is given on refusal, and for AUTH,
-503.
+undeliverable. Sigh. We return 252 if there is no VRFY ACL or it provides
+no explicit code, but if there is one we let it know best.
+Also, for ETRN, 458 is given on refusal, and for AUTH, 503.
From Exim 4.63, it is possible to override the response code details by
providing a suitable response code string at the start of the message provided
in user_msg. The code's first digit is checked for validity.
Arguments:
- where where the ACL was called from
- rc the failure code
- user_msg a message that can be included in an SMTP response
- log_msg a message for logging
+ where where the ACL was called from
+ rc the failure code
+ user_msg a message that can be included in an SMTP response
+ log_msg a message for logging
Returns: 0 in most cases
2 if the failure code was FAIL_DROP, in which case the
#endif
(where == ACL_WHERE_PREDATA)? US"DATA" :
(where == ACL_WHERE_DATA)? US"after DATA" :
-#ifdef EXPERIMENTAL_PRDR
+#ifndef DISABLE_PRDR
(where == ACL_WHERE_PRDR)? US"after DATA PRDR" :
#endif
(smtp_cmd_data == NULL)?
/* Set the default SMTP code, and allow a user message to change it. */
-smtp_code = (rc != FAIL)? US"451" : acl_wherecodes[where];
-smtp_message_code(&smtp_code, &codelen, &user_msg, &log_msg);
+smtp_code = rc == FAIL ? acl_wherecodes[where] : US"451";
+smtp_message_code(&smtp_code, &codelen, &user_msg, &log_msg,
+ where != ACL_WHERE_VRFY);
/* We used to have sender_address here; however, there was a bug that was not
updating sender_address after a rewrite during a verify. When this bug was
setflag(sender_verified_failed, af_sverify_told);
- if (rc != FAIL || (log_extra_selector & LX_sender_verify_fail) != 0)
+ if (rc != FAIL || LOGGING(sender_verify_fail))
log_write(0, LOG_MAIN|LOG_REJECT, "%s sender verify %s for <%s>%s",
host_and_ident(TRUE),
((sender_verified_failed->special_action & 255) == DEFER)? "defer":"fail",
is closing if required and return 2. */
if (log_reject_target != 0)
- log_write(0, log_reject_target, "%s %s%srejected %s%s",
- host_and_ident(TRUE),
+ {
+#ifdef SUPPORT_TLS
+ uschar * s = s_tlslog(NULL, NULL, NULL);
+ if (!s) s = US"";
+#else
+ uschar * s = US"";
+#endif
+ log_write(0, log_reject_target, "%s%s %s%srejected %s%s",
+ host_and_ident(TRUE), s,
sender_info, (rc == FAIL)? US"" : US"temporarily ", what, log_msg);
+ }
if (!drop) return 0;
/* If a host name is known, check it and all its aliases. */
- if (sender_host_name != NULL)
- {
- helo_verified = strcmpic(sender_host_name, sender_helo_name) == 0;
-
- if (helo_verified)
+ if (sender_host_name)
+ if ((helo_verified = strcmpic(sender_host_name, sender_helo_name) == 0))
{
+ sender_helo_dnssec = sender_host_dnssec;
HDEBUG(D_receive) debug_printf("matched host name\n");
}
else
{
uschar **aliases = sender_host_aliases;
- while (*aliases != NULL)
- {
- helo_verified = strcmpic(*aliases++, sender_helo_name) == 0;
- if (helo_verified) break;
- }
- HDEBUG(D_receive)
- {
- if (helo_verified)
+ while (*aliases)
+ if ((helo_verified = strcmpic(*aliases++, sender_helo_name) == 0))
+ {
+ sender_helo_dnssec = sender_host_dnssec;
+ break;
+ }
+
+ HDEBUG(D_receive) if (helo_verified)
debug_printf("matched alias %s\n", *(--aliases));
- }
}
- }
/* Final attempt: try a forward lookup of the helo name */
{
int rc;
host_item h;
+ dnssec_domains d;
+ host_item *hh;
+
h.name = sender_helo_name;
h.address = NULL;
h.mx = MX_NONE;
h.next = NULL;
+ d.request = US"*";
+ d.require = US"";
+
HDEBUG(D_receive) debug_printf("getting IP address for %s\n",
sender_helo_name);
- rc = host_find_byname(&h, NULL, 0, NULL, TRUE);
+ rc = host_find_bydns(&h, NULL, HOST_FIND_BY_A,
+ NULL, NULL, NULL, &d, NULL, NULL);
if (rc == HOST_FOUND || rc == HOST_FOUND_LOCAL)
- {
- host_item *hh = &h;
- while (hh != NULL)
- {
+ for (hh = &h; hh; hh = hh->next)
if (Ustrcmp(hh->address, sender_host_address) == 0)
{
helo_verified = TRUE;
+ if (h.dnssec == DS_YES) sender_helo_dnssec = TRUE;
HDEBUG(D_receive)
- debug_printf("IP address for %s matches calling address\n",
- sender_helo_name);
+ {
+ debug_printf("IP address for %s matches calling address\n"
+ "Forward DNS security status: %sverified\n",
+ sender_helo_name, sender_helo_dnssec ? "" : "un");
+ }
break;
}
- hh = hh->next;
- }
- }
}
}
smtp_user_msg(uschar *code, uschar *user_msg)
{
int len = 3;
-smtp_message_code(&code, &len, &user_msg, NULL);
+smtp_message_code(&code, &len, &user_msg, NULL, TRUE);
smtp_respond(code, len, TRUE, user_msg);
}
+static int
+smtp_in_auth(auth_instance *au, uschar ** s, uschar ** ss)
+{
+const uschar *set_id = NULL;
+int rc, i;
+
+/* Run the checking code, passing the remainder of the command line as
+data. Initials the $auth<n> variables as empty. Initialize $0 empty and set
+it as the only set numerical variable. The authenticator may set $auth<n>
+and also set other numeric variables. The $auth<n> variables are preferred
+nowadays; the numerical variables remain for backwards compatibility.
+
+Afterwards, have a go at expanding the set_id string, even if
+authentication failed - for bad passwords it can be useful to log the
+userid. On success, require set_id to expand and exist, and put it in
+authenticated_id. Save this in permanent store, as the working store gets
+reset at HELO, RSET, etc. */
+
+for (i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL;
+expand_nmax = 0;
+expand_nlength[0] = 0; /* $0 contains nothing */
+
+rc = (au->info->servercode)(au, smtp_cmd_data);
+if (au->set_id) set_id = expand_string(au->set_id);
+expand_nmax = -1; /* Reset numeric variables */
+for (i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL; /* Reset $auth<n> */
+
+/* The value of authenticated_id is stored in the spool file and printed in
+log lines. It must not contain binary zeros or newline characters. In
+normal use, it never will, but when playing around or testing, this error
+can (did) happen. To guard against this, ensure that the id contains only
+printing characters. */
+
+if (set_id) set_id = string_printing(set_id);
+
+/* For the non-OK cases, set up additional logging data if set_id
+is not empty. */
+
+if (rc != OK)
+ set_id = set_id && *set_id
+ ? string_sprintf(" (set_id=%s)", set_id) : US"";
+
+/* Switch on the result */
+
+switch(rc)
+ {
+ case OK:
+ if (!au->set_id || set_id) /* Complete success */
+ {
+ if (set_id) authenticated_id = string_copy_malloc(set_id);
+ sender_host_authenticated = au->name;
+ authentication_failed = FALSE;
+ authenticated_fail_id = NULL; /* Impossible to already be set? */
+
+ received_protocol =
+ (sender_host_address ? protocols : protocols_local)
+ [pextend + pauthed + (tls_in.active >= 0 ? pcrpted:0)];
+ *s = *ss = US"235 Authentication succeeded";
+ authenticated_by = au;
+ break;
+ }
+
+ /* Authentication succeeded, but we failed to expand the set_id string.
+ Treat this as a temporary error. */
+
+ auth_defer_msg = expand_string_message;
+ /* Fall through */
+
+ case DEFER:
+ if (set_id) authenticated_fail_id = string_copy_malloc(set_id);
+ *s = string_sprintf("435 Unable to authenticate at present%s",
+ auth_defer_user_msg);
+ *ss = string_sprintf("435 Unable to authenticate at present%s: %s",
+ set_id, auth_defer_msg);
+ break;
+
+ case BAD64:
+ *s = *ss = US"501 Invalid base64 data";
+ break;
+
+ case CANCELLED:
+ *s = *ss = US"501 Authentication cancelled";
+ break;
+
+ case UNEXPECTED:
+ *s = *ss = US"553 Initial data not expected";
+ break;
+
+ case FAIL:
+ if (set_id) authenticated_fail_id = string_copy_malloc(set_id);
+ *s = US"535 Incorrect authentication data";
+ *ss = string_sprintf("535 Incorrect authentication data%s", set_id);
+ break;
+
+ default:
+ if (set_id) authenticated_fail_id = string_copy_malloc(set_id);
+ *s = US"435 Internal error";
+ *ss = string_sprintf("435 Internal error%s: return %d from authentication "
+ "check", set_id, rc);
+ break;
+ }
+
+return rc;
+}
+
+
+
/*************************************************
* Initialize for SMTP incoming message *
*************************************************/
cmd_list[CMD_LIST_EHLO].is_mail_cmd = TRUE;
#ifdef SUPPORT_TLS
cmd_list[CMD_LIST_STARTTLS].is_mail_cmd = TRUE;
+cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = TRUE;
#endif
/* Set the local signal handler for SIGTERM - it tries to end off tidily */
while (done <= 0)
{
- uschar **argv;
+ const uschar **argv;
uschar *etrn_command;
uschar *etrn_serialize_key;
uschar *errmess;
uschar *user_msg = NULL;
uschar *recipient = NULL;
uschar *hello = NULL;
- uschar *set_id = NULL;
uschar *s, *ss;
BOOL was_rej_mail = FALSE;
BOOL was_rcpt = FALSE;
pid_t pid;
int start, end, sender_domain, recipient_domain;
int ptr, size, rc;
- int c, i;
+ int c;
auth_instance *au;
+ uschar *orcpt = NULL;
+ int flags;
+
+#if defined(SUPPORT_TLS) && defined(AUTH_TLS)
+ /* Check once per STARTTLS or SSL-on-connect for a TLS AUTH */
+ if ( tls_in.active >= 0
+ && tls_in.peercert
+ && tls_in.certificate_verified
+ && cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd
+ )
+ {
+ cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = FALSE;
+ if ( acl_smtp_auth
+ && (rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth,
+ &user_msg, &log_msg)) != OK
+ )
+ {
+ done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
+ continue;
+ }
+
+ for (au = auths; au; au = au->next)
+ if (strcmpic(US"tls", au->driver_name) == 0)
+ {
+ smtp_cmd_data = NULL;
+
+ if (smtp_in_auth(au, &s, &ss) == OK)
+ { DEBUG(D_auth) debug_printf("tls auth succeeded\n"); }
+ else
+ { DEBUG(D_auth) debug_printf("tls auth not succeeded\n"); }
+ break;
+ }
+ }
+#endif
switch(smtp_read_command(TRUE))
{
US"AUTH command used when not advertised");
break;
}
- if (sender_host_authenticated != NULL)
+ if (sender_host_authenticated)
{
done = synprot_error(L_smtp_protocol_error, 503, NULL,
US"already authenticated");
break;
}
- if (sender_address != NULL)
+ if (sender_address)
{
done = synprot_error(L_smtp_protocol_error, 503, NULL,
US"not permitted in mail transaction");
/* Check the ACL */
- if (acl_smtp_auth != NULL)
+ if ( acl_smtp_auth
+ && (rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth,
+ &user_msg, &log_msg)) != OK
+ )
{
- rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth, &user_msg, &log_msg);
- if (rc != OK)
- {
- done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
- break;
- }
+ done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
+ break;
}
/* Find the name of the requested authentication mechanism. */
as a server and which has been advertised (unless, sigh, allow_auth_
unadvertised is set). */
- for (au = auths; au != NULL; au = au->next)
- {
+ for (au = auths; au; au = au->next)
if (strcmpic(s, au->public_name) == 0 && au->server &&
- (au->advertised || allow_auth_unadvertised)) break;
- }
+ (au->advertised || allow_auth_unadvertised))
+ break;
- if (au == NULL)
+ if (au)
{
- done = synprot_error(L_smtp_protocol_error, 504, NULL,
- string_sprintf("%s authentication mechanism not supported", s));
- break;
- }
-
- /* Run the checking code, passing the remainder of the command line as
- data. Initials the $auth<n> variables as empty. Initialize $0 empty and set
- it as the only set numerical variable. The authenticator may set $auth<n>
- and also set other numeric variables. The $auth<n> variables are preferred
- nowadays; the numerical variables remain for backwards compatibility.
-
- Afterwards, have a go at expanding the set_id string, even if
- authentication failed - for bad passwords it can be useful to log the
- userid. On success, require set_id to expand and exist, and put it in
- authenticated_id. Save this in permanent store, as the working store gets
- reset at HELO, RSET, etc. */
+ c = smtp_in_auth(au, &s, &ss);
- for (i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL;
- expand_nmax = 0;
- expand_nlength[0] = 0; /* $0 contains nothing */
-
- c = (au->info->servercode)(au, smtp_cmd_data);
- if (au->set_id != NULL) set_id = expand_string(au->set_id);
- expand_nmax = -1; /* Reset numeric variables */
- for (i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL; /* Reset $auth<n> */
-
- /* The value of authenticated_id is stored in the spool file and printed in
- log lines. It must not contain binary zeros or newline characters. In
- normal use, it never will, but when playing around or testing, this error
- can (did) happen. To guard against this, ensure that the id contains only
- printing characters. */
-
- if (set_id != NULL) set_id = string_printing(set_id);
-
- /* For the non-OK cases, set up additional logging data if set_id
- is not empty. */
-
- if (c != OK)
- {
- if (set_id != NULL && *set_id != 0)
- set_id = string_sprintf(" (set_id=%s)", set_id);
- else set_id = US"";
- }
-
- /* Switch on the result */
-
- switch(c)
- {
- case OK:
- if (au->set_id == NULL || set_id != NULL) /* Complete success */
- {
- if (set_id != NULL) authenticated_id = string_copy_malloc(set_id);
- sender_host_authenticated = au->name;
- authentication_failed = FALSE;
- authenticated_fail_id = NULL; /* Impossible to already be set? */
- received_protocol =
- protocols[pextend + pauthed + ((tls_in.active >= 0)? pcrpted:0)] +
- ((sender_host_address != NULL)? pnlocal : 0);
- s = ss = US"235 Authentication succeeded";
- authenticated_by = au;
- break;
- }
-
- /* Authentication succeeded, but we failed to expand the set_id string.
- Treat this as a temporary error. */
-
- auth_defer_msg = expand_string_message;
- /* Fall through */
-
- case DEFER:
- if (set_id != NULL) authenticated_fail_id = string_copy_malloc(set_id);
- s = string_sprintf("435 Unable to authenticate at present%s",
- auth_defer_user_msg);
- ss = string_sprintf("435 Unable to authenticate at present%s: %s",
- set_id, auth_defer_msg);
- break;
-
- case BAD64:
- s = ss = US"501 Invalid base64 data";
- break;
-
- case CANCELLED:
- s = ss = US"501 Authentication cancelled";
- break;
-
- case UNEXPECTED:
- s = ss = US"553 Initial data not expected";
- break;
-
- case FAIL:
- if (set_id != NULL) authenticated_fail_id = string_copy_malloc(set_id);
- s = US"535 Incorrect authentication data";
- ss = string_sprintf("535 Incorrect authentication data%s", set_id);
- break;
-
- default:
- if (set_id != NULL) authenticated_fail_id = string_copy_malloc(set_id);
- s = US"435 Internal error";
- ss = string_sprintf("435 Internal error%s: return %d from authentication "
- "check", set_id, c);
- break;
+ smtp_printf("%s\r\n", s);
+ if (c != OK)
+ log_write(0, LOG_MAIN|LOG_REJECT, "%s authenticator failed for %s: %s",
+ au->name, host_and_ident(FALSE), ss);
}
-
- smtp_printf("%s\r\n", s);
- if (c != OK)
- log_write(0, LOG_MAIN|LOG_REJECT, "%s authenticator failed for %s: %s",
- au->name, host_and_ident(FALSE), ss);
+ else
+ done = synprot_error(L_smtp_protocol_error, 504, NULL,
+ string_sprintf("%s authentication mechanism not supported", s));
break; /* AUTH_CMD */
{
log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
"syntax or protocol errors (last command was \"%s\")",
- host_and_ident(FALSE), smtp_cmd_buffer);
+ host_and_ident(FALSE), string_printing(smtp_cmd_buffer));
done = 1;
}
if (sender_host_name == NULL &&
(deliver_domain = sender_helo_name, /* set $domain */
- match_isinlist(sender_helo_name, &helo_lookup_domains, 0,
+ match_isinlist(sender_helo_name, CUSS &helo_lookup_domains, 0,
&domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL)) == OK)
(void)host_name_lookup();
now obsolescent, since the verification can now be requested selectively
at ACL time. */
- helo_verified = helo_verify_failed = FALSE;
+ helo_verified = helo_verify_failed = sender_helo_dnssec = FALSE;
if (helo_required || helo_verify)
{
BOOL tempfail = !smtp_verify_helo();
/* Apply an ACL check if one is defined; afterwards, recheck
synchronization in case the client started sending in a delay. */
- if (acl_smtp_helo != NULL)
- {
- rc = acl_check(ACL_WHERE_HELO, NULL, acl_smtp_helo, &user_msg, &log_msg);
- if (rc != OK)
+ if (acl_smtp_helo)
+ if ((rc = acl_check(ACL_WHERE_HELO, NULL, acl_smtp_helo,
+ &user_msg, &log_msg)) != OK)
{
done = smtp_handle_acl_fail(ACL_WHERE_HELO, rc, user_msg, log_msg);
sender_helo_name = NULL;
break;
}
else if (!check_sync()) goto SYNC_FAILURE;
- }
/* Generate an OK reply. The default string includes the ident if present,
and also the IP address if present. Reflecting back the ident is intended
auth_advertised = FALSE;
pipelining_advertised = FALSE;
- #ifdef SUPPORT_TLS
+#ifdef SUPPORT_TLS
tls_advertised = FALSE;
- #endif
+#endif
+ dsn_advertised = FALSE;
+#ifdef SUPPORT_I18N
+ smtputf8_advertised = FALSE;
+#endif
smtp_code = US"250 "; /* Default response code plus space*/
if (user_msg == NULL)
if (sender_host_address != NULL)
{
- s = string_cat(s, &size, &ptr, US" [", 2);
- s = string_cat(s, &size, &ptr, sender_host_address,
- Ustrlen(sender_host_address));
- s = string_cat(s, &size, &ptr, US"]", 1);
+ s = string_catn(s, &size, &ptr, US" [", 2);
+ s = string_cat (s, &size, &ptr, sender_host_address);
+ s = string_catn(s, &size, &ptr, US"]", 1);
}
}
{
char *ss;
int codelen = 4;
- smtp_message_code(&smtp_code, &codelen, &user_msg, NULL);
+ smtp_message_code(&smtp_code, &codelen, &user_msg, NULL, TRUE);
s = string_sprintf("%.*s%s", codelen, smtp_code, user_msg);
if ((ss = strpbrk(CS s, "\r\n")) != NULL)
{
size = ptr + 1;
}
- s = string_cat(s, &size, &ptr, US"\r\n", 2);
+ s = string_catn(s, &size, &ptr, US"\r\n", 2);
/* If we received EHLO, we must create a multiline response which includes
the functions supported. */
{
sprintf(CS big_buffer, "%.3s-SIZE %d\r\n", smtp_code,
thismessage_size_limit);
- s = string_cat(s, &size, &ptr, big_buffer, Ustrlen(big_buffer));
+ s = string_cat(s, &size, &ptr, big_buffer);
}
else
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-SIZE\r\n", 7);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-SIZE\r\n", 7);
}
/* Exim does not do protocol conversion or data conversion. It is 8-bit
if (accept_8bitmime)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-8BITMIME\r\n", 11);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-8BITMIME\r\n", 11);
+ }
+
+ /* Advertise DSN support if configured to do so. */
+ if (verify_check_host(&dsn_advertise_hosts) != FAIL)
+ {
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-DSN\r\n", 6);
+ dsn_advertised = TRUE;
}
/* Advertise ETRN if there's an ACL checking whether a host is
if (acl_smtp_etrn != NULL)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-ETRN\r\n", 7);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-ETRN\r\n", 7);
}
/* Advertise EXPN if there's an ACL checking whether a host is
if (acl_smtp_expn != NULL)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-EXPN\r\n", 7);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-EXPN\r\n", 7);
}
/* Exim is quite happy with pipelining, so let the other end know that
if (pipelining_enable &&
verify_check_host(&pipelining_advertise_hosts) == OK)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-PIPELINING\r\n", 13);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-PIPELINING\r\n", 13);
sync_cmd_limit = NON_SYNC_CMD_PIPELINING;
pipelining_advertised = TRUE;
}
letters, so output the names in upper case, though we actually recognize
them in either case in the AUTH command. */
- if (auths != NULL)
- {
- if (verify_check_host(&auth_advertise_hosts) == OK)
- {
- auth_instance *au;
- BOOL first = TRUE;
- for (au = auths; au != NULL; au = au->next)
- {
- if (au->server && (au->advertise_condition == NULL ||
- expand_check_condition(au->advertise_condition, au->name,
- US"authenticator")))
- {
- int saveptr;
- if (first)
- {
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-AUTH", 5);
- first = FALSE;
- auth_advertised = TRUE;
- }
- saveptr = ptr;
- s = string_cat(s, &size, &ptr, US" ", 1);
- s = string_cat(s, &size, &ptr, au->public_name,
- Ustrlen(au->public_name));
- while (++saveptr < ptr) s[saveptr] = toupper(s[saveptr]);
- au->advertised = TRUE;
- }
- else au->advertised = FALSE;
- }
- if (!first) s = string_cat(s, &size, &ptr, US"\r\n", 2);
- }
- }
+ if ( auths
+#if defined(SUPPORT_TLS) && defined(AUTH_TLS)
+ && !sender_host_authenticated
+#endif
+ && verify_check_host(&auth_advertise_hosts) == OK
+ )
+ {
+ auth_instance *au;
+ BOOL first = TRUE;
+ for (au = auths; au; au = au->next)
+ if (au->server && (au->advertise_condition == NULL ||
+ expand_check_condition(au->advertise_condition, au->name,
+ US"authenticator")))
+ {
+ int saveptr;
+ if (first)
+ {
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-AUTH", 5);
+ first = FALSE;
+ auth_advertised = TRUE;
+ }
+ saveptr = ptr;
+ s = string_catn(s, &size, &ptr, US" ", 1);
+ s = string_cat (s, &size, &ptr, au->public_name);
+ while (++saveptr < ptr) s[saveptr] = toupper(s[saveptr]);
+ au->advertised = TRUE;
+ }
+ else
+ au->advertised = FALSE;
+
+ if (!first) s = string_catn(s, &size, &ptr, US"\r\n", 2);
+ }
/* Advertise TLS (Transport Level Security) aka SSL (Secure Socket Layer)
if it has been included in the binary, and the host matches
tls_advertise_hosts. We must *not* advertise if we are already in a
secure connection. */
- #ifdef SUPPORT_TLS
+#ifdef SUPPORT_TLS
if (tls_in.active < 0 &&
verify_check_host(&tls_advertise_hosts) != FAIL)
{
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-STARTTLS\r\n", 11);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-STARTTLS\r\n", 11);
tls_advertised = TRUE;
}
- #endif
+#endif
- #ifdef EXPERIMENTAL_PRDR
+#ifndef DISABLE_PRDR
/* Per Recipient Data Response, draft by Eric A. Hall extending RFC */
- if (prdr_enable) {
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-PRDR\r\n", 7);
- }
- #endif
+ if (prdr_enable)
+ {
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-PRDR\r\n", 7);
+ }
+#endif
+
+#ifdef SUPPORT_I18N
+ if ( accept_8bitmime
+ && verify_check_host(&smtputf8_advertise_hosts) != FAIL)
+ {
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-SMTPUTF8\r\n", 11);
+ smtputf8_advertised = TRUE;
+ }
+#endif
/* Finish off the multiline reply with one that is always available. */
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US" HELP\r\n", 7);
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US" HELP\r\n", 7);
}
/* Terminate the string (for debug), write it, and note that HELO/EHLO
s[ptr] = 0;
- #ifdef SUPPORT_TLS
+#ifdef SUPPORT_TLS
if (tls_in.active >= 0) (void)tls_write(TRUE, s, ptr); else
- #endif
+#endif
{
int i = fwrite(s, 1, ptr, smtp_out); i = i; /* compiler quietening */
helo_seen = TRUE;
/* Reset the protocol and the state, abandoning any previous message. */
-
- received_protocol = (esmtp?
- protocols[pextend +
- ((sender_host_authenticated != NULL)? pauthed : 0) +
- ((tls_in.active >= 0)? pcrpted : 0)]
- :
- protocols[pnormal + ((tls_in.active >= 0)? pcrpted : 0)])
- +
- ((sender_host_address != NULL)? pnlocal : 0);
-
+ received_protocol =
+ (sender_host_address ? protocols : protocols_local)
+ [ (esmtp
+ ? pextend + (sender_host_authenticated ? pauthed : 0)
+ : pnormal)
+ + (tls_in.active >= 0 ? pcrpted : 0)
+ ];
smtp_reset(reset_point);
toomany = FALSE;
break; /* HELO/EHLO */
if (!extract_option(&name, &value)) break;
for (mail_args = env_mail_type_list;
- (char *)mail_args < (char *)env_mail_type_list + sizeof(env_mail_type_list);
+ mail_args->value != ENV_MAIL_OPT_NULL;
mail_args++
)
- {
if (strcmpic(name, mail_args->name) == 0)
break;
- }
if (mail_args->need_value && strcmpic(value, US"") == 0)
break;
and "7BIT" as body types, but take no action. */
case ENV_MAIL_OPT_BODY:
if (accept_8bitmime) {
- if (strcmpic(value, US"8BITMIME") == 0) {
+ if (strcmpic(value, US"8BITMIME") == 0)
body_8bitmime = 8;
- } else if (strcmpic(value, US"7BIT") == 0) {
+ else if (strcmpic(value, US"7BIT") == 0)
body_8bitmime = 7;
- } else {
+ else
+ {
body_8bitmime = 0;
done = synprot_error(L_smtp_syntax_error, 501, NULL,
US"invalid data for BODY");
goto COMMAND_LOOP;
- }
+ }
DEBUG(D_receive) debug_printf("8BITMIME: %d\n", body_8bitmime);
break;
}
arg_error = TRUE;
break;
+ /* Handle the two DSN options, but only if configured to do so (which
+ will have caused "DSN" to be given in the EHLO response). The code itself
+ is included only if configured in at build time. */
+
+ case ENV_MAIL_OPT_RET:
+ if (dsn_advertised)
+ {
+ /* Check if RET has already been set */
+ if (dsn_ret > 0)
+ {
+ synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"RET can be specified once only");
+ goto COMMAND_LOOP;
+ }
+ dsn_ret = strcmpic(value, US"HDRS") == 0
+ ? dsn_ret_hdrs
+ : strcmpic(value, US"FULL") == 0
+ ? dsn_ret_full
+ : 0;
+ DEBUG(D_receive) debug_printf("DSN_RET: %d\n", dsn_ret);
+ /* Check for invalid invalid value, and exit with error */
+ if (dsn_ret == 0)
+ {
+ synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"Value for RET is invalid");
+ goto COMMAND_LOOP;
+ }
+ }
+ break;
+ case ENV_MAIL_OPT_ENVID:
+ if (dsn_advertised)
+ {
+ /* Check if the dsn envid has been already set */
+ if (dsn_envid != NULL)
+ {
+ synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"ENVID can be specified once only");
+ goto COMMAND_LOOP;
+ }
+ dsn_envid = string_copy(value);
+ DEBUG(D_receive) debug_printf("DSN_ENVID: %s\n", dsn_envid);
+ }
+ break;
+
/* Handle the AUTH extension. If the value given is not "<>" and either
the ACL says "yes" or there is no ACL but the sending host is
authenticated, we set it up as the authenticated sender. However, if the
rc = acl_check(ACL_WHERE_MAILAUTH, NULL, acl_smtp_mailauth,
&user_msg, &log_msg);
}
-
+
switch (rc)
{
case OK:
- if (authenticated_by == NULL ||
- authenticated_by->mail_auth_condition == NULL ||
- expand_check_condition(authenticated_by->mail_auth_condition,
- authenticated_by->name, US"authenticator"))
- break; /* Accept the AUTH */
-
- ignore_msg = US"server_mail_auth_condition failed";
- if (authenticated_id != NULL)
- ignore_msg = string_sprintf("%s: authenticated ID=\"%s\"",
- ignore_msg, authenticated_id);
-
+ if (authenticated_by == NULL ||
+ authenticated_by->mail_auth_condition == NULL ||
+ expand_check_condition(authenticated_by->mail_auth_condition,
+ authenticated_by->name, US"authenticator"))
+ break; /* Accept the AUTH */
+
+ ignore_msg = US"server_mail_auth_condition failed";
+ if (authenticated_id != NULL)
+ ignore_msg = string_sprintf("%s: authenticated ID=\"%s\"",
+ ignore_msg, authenticated_id);
+
/* Fall through */
-
+
case FAIL:
- authenticated_sender = NULL;
- log_write(0, LOG_MAIN, "ignoring AUTH=%s from %s (%s)",
- value, host_and_ident(TRUE), ignore_msg);
- break;
-
+ authenticated_sender = NULL;
+ log_write(0, LOG_MAIN, "ignoring AUTH=%s from %s (%s)",
+ value, host_and_ident(TRUE), ignore_msg);
+ break;
+
/* Should only get DEFER or ERROR here. Put back terminator
overrides for error message */
-
+
default:
- value[-1] = '=';
- name[-1] = ' ';
- (void)smtp_handle_acl_fail(ACL_WHERE_MAILAUTH, rc, user_msg,
- log_msg);
- goto COMMAND_LOOP;
+ value[-1] = '=';
+ name[-1] = ' ';
+ (void)smtp_handle_acl_fail(ACL_WHERE_MAILAUTH, rc, user_msg,
+ log_msg);
+ goto COMMAND_LOOP;
}
}
break;
-#ifdef EXPERIMENTAL_PRDR
+#ifndef DISABLE_PRDR
case ENV_MAIL_OPT_PRDR:
- if ( prdr_enable )
+ if (prdr_enable)
prdr_requested = TRUE;
break;
#endif
- /* Unknown option. Stick back the terminator characters and break
+#ifdef SUPPORT_I18N
+ case ENV_MAIL_OPT_UTF8:
+ if (smtputf8_advertised)
+ {
+ DEBUG(D_receive) debug_printf("smtputf8 requested\n");
+ message_smtputf8 = allow_utf8_domains = TRUE;
+ received_protocol = string_sprintf("utf8%s", received_protocol);
+ }
+ break;
+#endif
+ /* No valid option. Stick back the terminator characters and break
the loop. Do the name-terminator second as extract_option sets
- value==name when it found no equal-sign.
- An error for a malformed address will occur. */
- default:
+ value==name when it found no equal-sign.
+ An error for a malformed address will occur. */
+ case ENV_MAIL_OPT_NULL:
value[-1] = '=';
name[-1] = ' ';
arg_error = TRUE;
break;
+
+ default: assert(0);
}
/* Break out of for loop if switch() had bad argument or
when start of the email address is reached */
/* Now extract the address, first applying any SMTP-time rewriting. The
TRUE flag allows "<>" as a sender address. */
- raw_sender = ((rewrite_existflags & rewrite_smtp) != 0)?
- rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
- global_rewrite_rules) : smtp_cmd_data;
+ raw_sender = rewrite_existflags & rewrite_smtp
+ ? rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
+ global_rewrite_rules)
+ : smtp_cmd_data;
/* rfc821_domains = TRUE; << no longer needed */
raw_sender =
when pipelining is not advertised, do another sync check in case the ACL
delayed and the client started sending in the meantime. */
- if (acl_smtp_mail == NULL) rc = OK; else
+ if (acl_smtp_mail)
{
rc = acl_check(ACL_WHERE_MAIL, NULL, acl_smtp_mail, &user_msg, &log_msg);
if (rc == OK && !pipelining_advertised && !check_sync())
goto SYNC_FAILURE;
}
+ else
+ rc = OK;
if (rc == OK || rc == DISCARD)
{
- if (user_msg == NULL)
+ if (!user_msg)
smtp_printf("%s%s%s", US"250 OK",
- #ifdef EXPERIMENTAL_PRDR
- prdr_requested == TRUE ? US", PRDR Requested" :
- #endif
+ #ifndef DISABLE_PRDR
+ prdr_requested ? US", PRDR Requested" : US"",
+ #else
US"",
+ #endif
US"\r\n");
- else
+ else
{
- #ifdef EXPERIMENTAL_PRDR
- if ( prdr_requested == TRUE )
+ #ifndef DISABLE_PRDR
+ if (prdr_requested)
user_msg = string_sprintf("%s%s", user_msg, US", PRDR Requested");
#endif
- smtp_user_msg(US"250",user_msg);
+ smtp_user_msg(US"250", user_msg);
}
smtp_delay_rcpt = smtp_rlr_base;
recipients_discarded = (rc == DISCARD);
break;
}
+ /* Set the DSN flags orcpt and dsn_flags from the session*/
+ orcpt = NULL;
+ flags = 0;
+
+ if (esmtp) for(;;)
+ {
+ uschar *name, *value;
+
+ if (!extract_option(&name, &value))
+ break;
+
+ if (dsn_advertised && strcmpic(name, US"ORCPT") == 0)
+ {
+ /* Check whether orcpt has been already set */
+ if (orcpt)
+ {
+ synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"ORCPT can be specified once only");
+ goto COMMAND_LOOP;
+ }
+ orcpt = string_copy(value);
+ DEBUG(D_receive) debug_printf("DSN orcpt: %s\n", orcpt);
+ }
+
+ else if (dsn_advertised && strcmpic(name, US"NOTIFY") == 0)
+ {
+ /* Check if the notify flags have been already set */
+ if (flags > 0)
+ {
+ synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"NOTIFY can be specified once only");
+ goto COMMAND_LOOP;
+ }
+ if (strcmpic(value, US"NEVER") == 0)
+ flags |= rf_notify_never;
+ else
+ {
+ uschar *p = value;
+ while (*p != 0)
+ {
+ uschar *pp = p;
+ while (*pp != 0 && *pp != ',') pp++;
+ if (*pp == ',') *pp++ = 0;
+ if (strcmpic(p, US"SUCCESS") == 0)
+ {
+ DEBUG(D_receive) debug_printf("DSN: Setting notify success\n");
+ flags |= rf_notify_success;
+ }
+ else if (strcmpic(p, US"FAILURE") == 0)
+ {
+ DEBUG(D_receive) debug_printf("DSN: Setting notify failure\n");
+ flags |= rf_notify_failure;
+ }
+ else if (strcmpic(p, US"DELAY") == 0)
+ {
+ DEBUG(D_receive) debug_printf("DSN: Setting notify delay\n");
+ flags |= rf_notify_delay;
+ }
+ else
+ {
+ /* Catch any strange values */
+ synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"Invalid value for NOTIFY parameter");
+ goto COMMAND_LOOP;
+ }
+ p = pp;
+ }
+ DEBUG(D_receive) debug_printf("DSN Flags: %x\n", flags);
+ }
+ }
+
+ /* Unknown option. Stick back the terminator characters and break
+ the loop. An error for a malformed address will occur. */
+
+ else
+ {
+ DEBUG(D_receive) debug_printf("Invalid RCPT option: %s : %s\n", name, value);
+ name[-1] = ' ';
+ value[-1] = '=';
+ break;
+ }
+ }
+
/* Apply SMTP rewriting then extract the working address. Don't allow "<>"
as a recipient address */
if (user_msg == NULL) smtp_printf("250 Accepted\r\n");
else smtp_user_msg(US"250", user_msg);
receive_add_recipient(recipient, -1);
+
+ /* Set the dsn flags in the recipients_list */
+ recipients_list[recipients_count-1].orcpt = orcpt;
+ recipients_list[recipients_count-1].dsn_flags = flags;
+
+ DEBUG(D_receive) debug_printf("DSN: orcpt: %s flags: %d\n",
+ recipients_list[recipients_count-1].orcpt,
+ recipients_list[recipients_count-1].dsn_flags);
}
/* The recipient was discarded */
else smtp_user_msg(US"250", user_msg);
rcpt_fail_count++;
discarded = TRUE;
- log_write(0, LOG_MAIN|LOG_REJECT, "%s F=<%s> rejected RCPT %s: "
+ log_write(0, LOG_MAIN|LOG_REJECT, "%s F=<%s> RCPT %s: "
"discarded by %s ACL%s%s", host_and_ident(TRUE),
- (sender_address_unrewritten != NULL)?
- sender_address_unrewritten : sender_address,
+ sender_address_unrewritten? sender_address_unrewritten : sender_address,
smtp_cmd_argument, recipients_discarded? "MAIL" : "RCPT",
- (log_msg == NULL)? US"" : US": ",
- (log_msg == NULL)? US"" : log_msg);
+ log_msg ? US": " : US"", log_msg ? log_msg : US"");
}
/* Either the ACL failed the address, or it was deferred. */
ACL may have delayed. To handle cutthrough delivery enforce a dummy call
to get the DATA command sent. */
- if (acl_smtp_predata == NULL && cutthrough_fd < 0) rc = OK; else
+ if (acl_smtp_predata == NULL && cutthrough.fd < 0) rc = OK; else
{
uschar * acl= acl_smtp_predata ? acl_smtp_predata : US"accept";
enable_dollar_recipients = TRUE;
case VRFY_CMD:
- HAD(SCH_VRFY);
- rc = acl_check(ACL_WHERE_VRFY, NULL, acl_smtp_vrfy, &user_msg, &log_msg);
- if (rc != OK)
- done = smtp_handle_acl_fail(ACL_WHERE_VRFY, rc, user_msg, log_msg);
- else
{
- uschar *address;
- uschar *s = NULL;
+ uschar * address;
- /* rfc821_domains = TRUE; << no longer needed */
- address = parse_extract_address(smtp_cmd_data, &errmess, &start, &end,
- &recipient_domain, FALSE);
- /* rfc821_domains = FALSE; << no longer needed */
+ HAD(SCH_VRFY);
- if (address == NULL)
- s = string_sprintf("501 %s", errmess);
+ if(!(address = parse_extract_address(smtp_cmd_data, &errmess, &start, &end,
+ &recipient_domain, FALSE)))
+ smtp_printf("501 %s\r\n", errmess);
+
+ else if ((rc = acl_check(ACL_WHERE_VRFY, address, acl_smtp_vrfy,
+ &user_msg, &log_msg)) != OK)
+ done = smtp_handle_acl_fail(ACL_WHERE_VRFY, rc, user_msg, log_msg);
else
- {
- address_item *addr = deliver_make_addr(address, FALSE);
- switch(verify_address(addr, NULL, vopt_is_recipient | vopt_qualify, -1,
- -1, -1, NULL, NULL, NULL))
- {
- case OK:
- s = string_sprintf("250 <%s> is deliverable", address);
- break;
+ {
+ uschar *s = NULL;
+
+ address_item *addr = deliver_make_addr(address, FALSE);
+ switch(verify_address(addr, NULL, vopt_is_recipient | vopt_qualify, -1,
+ -1, -1, NULL, NULL, NULL))
+ {
+ case OK:
+ s = string_sprintf("250 <%s> is deliverable", address);
+ break;
- case DEFER:
- s = (addr->user_message != NULL)?
- string_sprintf("451 <%s> %s", address, addr->user_message) :
- string_sprintf("451 Cannot resolve <%s> at this time", address);
- break;
+ case DEFER:
+ s = (addr->user_message != NULL)?
+ string_sprintf("451 <%s> %s", address, addr->user_message) :
+ string_sprintf("451 Cannot resolve <%s> at this time", address);
+ break;
- case FAIL:
- s = (addr->user_message != NULL)?
- string_sprintf("550 <%s> %s", address, addr->user_message) :
- string_sprintf("550 <%s> is not deliverable", address);
- log_write(0, LOG_MAIN, "VRFY failed for %s %s",
- smtp_cmd_argument, host_and_ident(TRUE));
- break;
- }
- }
+ case FAIL:
+ s = (addr->user_message != NULL)?
+ string_sprintf("550 <%s> %s", address, addr->user_message) :
+ string_sprintf("550 <%s> is not deliverable", address);
+ log_write(0, LOG_MAIN, "VRFY failed for %s %s",
+ smtp_cmd_argument, host_and_ident(TRUE));
+ break;
+ }
- smtp_printf("%s\r\n", s);
+ smtp_printf("%s\r\n", s);
+ }
+ break;
}
- break;
case EXPN_CMD:
/* Apply an ACL check if one is defined */
- if (acl_smtp_starttls != NULL)
+ if ( acl_smtp_starttls
+ && (rc = acl_check(ACL_WHERE_STARTTLS, NULL, acl_smtp_starttls,
+ &user_msg, &log_msg)) != OK
+ )
{
- rc = acl_check(ACL_WHERE_STARTTLS, NULL, acl_smtp_starttls, &user_msg,
- &log_msg);
- if (rc != OK)
- {
- done = smtp_handle_acl_fail(ACL_WHERE_STARTTLS, rc, user_msg, log_msg);
- break;
- }
+ done = smtp_handle_acl_fail(ACL_WHERE_STARTTLS, rc, user_msg, log_msg);
+ break;
}
/* RFC 2487 is not clear on when this command may be sent, though it
helo_seen = esmtp = auth_advertised = pipelining_advertised = FALSE;
cmd_list[CMD_LIST_EHLO].is_mail_cmd = TRUE;
cmd_list[CMD_LIST_AUTH].is_mail_cmd = TRUE;
+ cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = TRUE;
if (sender_helo_name != NULL)
{
store_free(sender_helo_name);
set_process_info("handling incoming TLS connection from %s",
host_and_ident(FALSE));
}
- received_protocol = (esmtp?
- protocols[pextend + pcrpted +
- ((sender_host_authenticated != NULL)? pauthed : 0)]
- :
- protocols[pnormal + pcrpted])
- +
- ((sender_host_address != NULL)? pnlocal : 0);
+ received_protocol =
+ (sender_host_address ? protocols : protocols_local)
+ [ (esmtp
+ ? pextend + (sender_host_authenticated ? pauthed : 0)
+ : pnormal)
+ + (tls_in.active >= 0 ? pcrpted : 0)
+ ];
sender_host_authenticated = NULL;
authenticated_id = NULL;
log_write(L_etrn, LOG_MAIN, "ETRN %s received from %s", smtp_cmd_argument,
host_and_ident(FALSE));
- rc = acl_check(ACL_WHERE_ETRN, NULL, acl_smtp_etrn, &user_msg, &log_msg);
- if (rc != OK)
+ if ((rc = acl_check(ACL_WHERE_ETRN, NULL, acl_smtp_etrn,
+ &user_msg, &log_msg)) != OK)
{
done = smtp_handle_acl_fail(ACL_WHERE_ETRN, rc, user_msg, log_msg);
break;
break;
}
etrn_command = US"exim -R";
- argv = child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE, 2, US"-R",
- smtp_cmd_data);
+ argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE,
+ *queue_name ? 4 : 2,
+ US"-R", smtp_cmd_data,
+ US"-MCG", queue_name);
}
/* If we are host-testing, don't actually do anything. */
/* If ETRN queue runs are to be serialized, check the database to
ensure one isn't already running. */
- if (smtp_etrn_serialize && !enq_start(etrn_serialize_key))
+ if (smtp_etrn_serialize && !enq_start(etrn_serialize_key, 1))
{
smtp_printf("458 Already processing %s\r\n", smtp_cmd_data);
break;
done = 1; /* Pretend eof - drops connection */
break;
- #ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
case PROXY_FAIL_IGNORE_CMD:
smtp_printf("503 Command refused, required Proxy negotiation failed\r\n");
break;
- #endif
+#endif
default:
if (unknown_command_count++ >= smtp_max_unknown_commands)
done = 2;
log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
"unrecognized commands (last was \"%s\")", host_and_ident(FALSE),
- smtp_cmd_buffer);
+ string_printing(smtp_cmd_buffer));
}
else
done = synprot_error(L_smtp_syntax_error, 500, NULL,
return done - 2; /* Convert yield values */
}
+/* vi: aw ai sw=2
+*/
/* End of smtp_in.c */
git://git.exim.org / exim.git / blobdiff