Testsuite: fixe lower/upper case fix in OpenSSL munging

[exim.git] / test / runtest

diff --git a/test/runtest b/test/runtest
index 8dca8316bc368dc882cdf904cf72fe073a954d2e..fb1cfc762043c2918cf0190e374ee66649e924c8 100755 (executable)
--- a/test/runtest
+++ b/test/runtest
@@ -1,4 +1,6 @@
-#! /usr/bin/perl -w
+#! /usr/bin/env perl
+# We use env, because in some environments of our build farm
+# the Perl 5.010 interpreter is only reachable via $PATH

 
 ###############################################################################
 # This is the controlling script for the "new" test suite for Exim. It should #
 
 ###############################################################################
 # This is the controlling script for the "new" test suite for Exim. It should #


@@ -14,13 +16,21 @@
 ###############################################################################
 
 #use strict;
 ###############################################################################
 
 #use strict;

-#use 5.010;
+use 5.010;
+use feature 'state';   # included in 5.010
+use warnings;
+

 use Errno;
 use FileHandle;
 use Socket;
 use Time::Local;
 use Cwd;
 use File::Basename;
 use Errno;
 use FileHandle;
 use Socket;
 use Time::Local;
 use Cwd;
 use File::Basename;

+use FindBin qw'$Bin';
+
+use lib "$Bin/lib";
+use Exim::Runtest;
+

 use if $ENV{DEBUG} && $ENV{DEBUG} =~ /\bruntest\b/ => ('Smart::Comments' => '####');
 
 
 use if $ENV{DEBUG} && $ENV{DEBUG} =~ /\bruntest\b/ => ('Smart::Comments' => '####');
 
 


@@ -81,6 +91,11 @@ $parm_port_d = 1225;         # Used for the Exim daemon
 $parm_port_d2 = 1226;        # Additional for daemon
 $parm_port_d3 = 1227;        # Additional for daemon
 $parm_port_d4 = 1228;        # Additional for daemon
 $parm_port_d2 = 1226;        # Additional for daemon
 $parm_port_d3 = 1227;        # Additional for daemon
 $parm_port_d4 = 1228;        # Additional for daemon

+my $dynamic_socket;          # allocated later for PORT_DYNAMIC
+
+# Find a suiteable group name for test (currently only 0001
+# uses a group name. A numeric group id would do
+my $parm_mailgroup = Exim::Runtest::mailgroup('mail');

 
 # Manually set locale
 $ENV{LC_ALL} = 'C';
 
 # Manually set locale
 $ENV{LC_ALL} = 'C';


@@ -142,6 +157,8 @@ s?\bPORT_S\b?$parm_port_s?g;
 s?\bTESTNUM\b?$_[0]?g;
 s?(\b|_)V4NET([\._])?$1$parm_ipv4_test_net$2?g;
 s?\bV6NET:?$parm_ipv6_test_net:?g;
 s?\bTESTNUM\b?$_[0]?g;
 s?(\b|_)V4NET([\._])?$1$parm_ipv4_test_net$2?g;
 s?\bV6NET:?$parm_ipv6_test_net:?g;

+s?\bPORT_DYNAMIC\b?$dynamic_socket->sockport()?eg;
+s?\bMAILGROUP\b?$parm_mailgroup?g;

 }
 
 
 }
 
 


@@ -676,6 +693,10 @@ RESET_AFTER_EXTRA_LINE_READ:
   # Port in host address in spool file output from -Mvh
   s/^-host_address (.*)\.\d+/-host_address $1.9999/;
 
   # Port in host address in spool file output from -Mvh
   s/^-host_address (.*)\.\d+/-host_address $1.9999/;
 

+  if ($dynamic_socket and $dynamic_socket->opened and my $port = $dynamic_socket->sockport) {
+    s/^Connecting to 127\.0\.0\.1 port \K$port/<dynamic port>/;
+  }
+

 
   # ======== Local IP addresses ========
   # The amount of space between "host" and the address in verification output
 
   # ======== Local IP addresses ========
   # The amount of space between "host" and the address in verification output


@@ -867,7 +888,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     next if /^SSL info: SSLv2\/v3 write client hello A/;
     next if /^SSL info: SSLv3 read server key exchange A/;
     next if /SSL verify error: depth=0 error=certificate not trusted/;
     next if /^SSL info: SSLv2\/v3 write client hello A/;
     next if /^SSL info: SSLv3 read server key exchange A/;
     next if /SSL verify error: depth=0 error=certificate not trusted/;

-    s/SSL3_READ_BYTES/ssl3_read_bytes/;
+    s/SSL3_READ_BYTES/ssl3_read_bytes/i;

 
     # gnutls version variances
     next if /^Error in the pull function./;
 
     # gnutls version variances
     next if /^Error in the pull function./;


@@ -1034,6 +1055,30 @@ RESET_AFTER_EXTRA_LINE_READ:
     # Spool filesystem free space changes on different systems.
     s/^((?:spool|log) directory space =) -?\d+K (inodes =)\s*-?\d+/$1 nnnnnK $2 nnnnn/;
 
     # Spool filesystem free space changes on different systems.
     s/^((?:spool|log) directory space =) -?\d+K (inodes =)\s*-?\d+/$1 nnnnnK $2 nnnnn/;
 

+    # Non-TLS builds have different expansions for received_header_text
+    if (s/(with \$received_protocol)\}\} \$\{if def:tls_cipher \{\(\$tls_cipher\)\n$/$1/)
+      {
+      $_ .= <IN>;
+      s/\s+\}\}(?=\(Exim )/\}\} /;
+      }
+    if (/^  condition: def:tls_cipher$/)
+      {
+      <IN>; <IN>; <IN>; <IN>; <IN>; <IN>;
+      <IN>; <IN>; <IN>; <IN>; <IN>; next;
+      }
+
+    # Not all platforms build with DKIM enabled
+    next if /^PDKIM >> Body data for hash, canonicalized/;
+
+    # Not all platforms support TCP Fast Open, and the compile omits the check
+    if (s/\S+ in hosts_try_fastopen\? no \(option unset\)\n$//)
+      {
+      $_ .= <IN>;
+      s/ \.\.\. >>> / ... /;
+      }
+
+    next if /^(ppppp )?setsockopt FASTOPEN: Protocol not available$/;
+

     # When Exim is checking the size of directories for maildir, it uses
     # the check_dir_size() function to scan directories. Of course, the order
     # of the files that are obtained using readdir() varies from system to
     # When Exim is checking the size of directories for maildir, it uses
     # the check_dir_size() function to scan directories. Of course, the order
     # of the files that are obtained using readdir() varies from system to


@@ -1108,11 +1153,22 @@ return $yield;
 #            [2] if there is a C in the prompt and $force_continue is true
 # Returns:   returns the answer
 
 #            [2] if there is a C in the prompt and $force_continue is true
 # Returns:   returns the answer
 

-sub interact{
-print $_[0];
-if ($_[1]) { $_ = "u"; print "... update forced\n"; }
-  elsif ($_[2]) { $_ = "c"; print "... continue forced\n"; }
-  else { $_ = <T>; }
+sub interact {
+  my ($prompt, $have_u, $have_c) = @_;
+
+  print $prompt;
+
+  if ($have_u) {
+    print "... update forced\n";
+    return 'u';
+  }
+
+  if ($have_c) {
+    print "... continue forced\n";
+    return 'c';
+  }
+
+  return lc <T>;

 }
 
 
 }
 
 


@@ -1132,13 +1188,13 @@ if ($_[1]) { $_ = "u"; print "... update forced\n"; }
 
 
 sub log_failure {
 
 
 sub log_failure {

-  my $logfile = shift();
-  my $testno  = shift();
-  my $detail  = shift() || '';
-  if ( open(my $fh, ">>", $logfile) ) {
-    print $fh "Test $testno $detail failed\n";
-    close $fh;
-  }
+  my ($logfile, $testno, $detail) = @_;
+
+  open(my $fh, '>>', $logfile) or return;
+
+  print $fh "Test $testno "
+        . (defined $detail ? "$detail " : '')
+        . "failed\n";

 }
 
 
 }
 
 


@@ -1185,10 +1241,9 @@ if (! -e $sf_current)
 
   for (;;)
     {
 
   for (;;)
     {

-    print "Continue, Show, or Quit? [Q] ";
-    $_ = $force_continue ? "c" : <T>;
-    tests_exit(1) if /^q?$/i;
-    log_failure($log_failed_filename, $testno, $rf) if (/^c$/i && $force_continue);
+    $_ = interact('Continue, Show, or Quit? [Q] ', undef, $force_continue);
+    tests_exit(1) if /^q?$/;
+    log_failure($log_failed_filename, $testno, $rf) if (/^c$/ && $force_continue);

     return 0 if /^c$/i;
     last if (/^s$/);
     }
     return 0 if /^c$/i;
     last if (/^s$/);
     }


@@ -1207,9 +1262,9 @@ if (! -e $sf_current)
   print "\n";
   for (;;)
     {
   print "\n";
   for (;;)
     {

-    interact("Continue, Update & retry, Quit? [Q] ", $force_update, $force_continue);
-    tests_exit(1) if /^q?$/i;
-    log_failure($log_failed_filename, $testno, $rsf) if (/^c$/i && $force_continue);
+    $_ = interact('Continue, Update & retry, Quit? [Q] ', $force_update, $force_continue);
+    tests_exit(1) if /^q?$/;
+    log_failure($log_failed_filename, $testno, $rsf) if (/^c$/ && $force_continue);

     return 0 if /^c$/i;
     last if (/^u$/i);
     }
     return 0 if /^c$/i;
     last if (/^u$/i);
     }


@@ -1327,10 +1382,10 @@ if (-e $sf_current)
   print "\n";
   for (;;)
     {
   print "\n";
   for (;;)
     {

-    interact("Continue, Retry, Update current"
-       . ($sf_current ne $sf_flavour  ? "/Save for flavour '$flavour'" : "")
-       . " & retry, Quit? [Q] ", $force_update, $force_continue);
-    tests_exit(1) if /^q?$/i;
+    $_ = interact('Continue, Retry, Update current'
+       . ($sf_current ne $sf_flavour  ? "/Save for flavour '$flavour'" : '')
+       . ' & retry, Quit? [Q] ', $force_update, $force_continue);
+    tests_exit(1) if /^q?$/;

     log_failure($log_failed_filename, $testno, $sf_current) if (/^c$/i && $force_continue);
     return 0 if /^c$/i;
     return 1 if /^r$/i;
     log_failure($log_failed_filename, $testno, $sf_current) if (/^c$/i && $force_continue);
     return 0 if /^c$/i;
     return 1 if /^r$/i;


@@ -1432,6 +1487,9 @@ $munges =
     { 'stdout' => 's/^\d\d:\d\d:\d\d\s+\d+ //;
                   s/Process \d+ is ready for new message/Process pppp is ready for new message/'
     },
     { 'stdout' => 's/^\d\d:\d\d:\d\d\s+\d+ //;
                   s/Process \d+ is ready for new message/Process pppp is ready for new message/'
     },

+
+    'timeout_errno' =>         # actual errno differs Solaris vs. Linux
+    { 'mainlog' => 's/(host deferral .* errno) <\d+> /$1 <EEE> /' },

   };
 
 
   };
 
 


@@ -1544,16 +1602,16 @@ if (! $message_skip)
 
     for (;;)
       {
 
     for (;;)
       {

-      interact("Continue, Update & retry, or Quit? [Q] ", $force_update, $force_continue);
-      tests_exit(1) if /^q?$/i;
-      log_failure($log_failed_filename, $testno, "missing email") if (/^c$/i && $force_continue);
-      last if /^c$/i;
+      $_ = interact('Continue, Update & retry, or Quit? [Q] ', $force_update, $force_continue);
+      tests_exit(1) if /^q?$/;
+      log_failure($log_failed_filename, $testno, "missing email") if (/^c$/ && $force_continue);
+      last if /^c$/;

 
       # For update, we not only have to unlink the file, but we must also
       # remove it from the @oldmails vector, as otherwise it will still be
       # checked for when we re-run the test.
 
 
       # For update, we not only have to unlink the file, but we must also
       # remove it from the @oldmails vector, as otherwise it will still be
       # checked for when we re-run the test.
 

-      if (/^u$/i)
+      if (/^u$/)

         {
         foreach $key (keys %expected_mails)
           {
         {
         foreach $key (keys %expected_mails)
           {


@@ -1628,11 +1686,11 @@ if (! $msglog_skip)
 
     for (;;)
       {
 
     for (;;)
       {

-      interact("Continue, Update, or Quit? [Q] ", $force_update, $force_continue);
-      tests_exit(1) if /^q?$/i;
-      log_failure($log_failed_filename, $testno, "missing msglog") if (/^c$/i && $force_continue);
-      last if /^c$/i;
-      if (/^u$/i)
+      $_ = interact('Continue, Update, or Quit? [Q] ', $force_update, $force_continue);
+      tests_exit(1) if /^q?$/;
+      log_failure($log_failed_filename, $testno, "missing msglog") if (/^c$/ && $force_continue);
+      last if /^c$/;
+      if (/^u$/)

         {
         foreach $key (keys %expected_msglogs)
           {
         {
         foreach $key (keys %expected_msglogs)
           {


@@ -2160,8 +2218,7 @@ elsif (/^((?i:[A-Z\d_]+=\S+\s+)+)?(\d+)?\s*(sudo(?:\s+-u\s+(\w+))?\s+)?exim(_\S+
 
     # Done backwards just in case there are more than 9
 
 
     # Done backwards just in case there are more than 9
 

-    my($i);
-    for ($i = @msglist; $i > 0; $i--) { $args =~ s/\$msg$i/$msglist[$i-1]/g; }
+    for (my $i = @msglist; $i > 0; $i--) { $args =~ s/\$msg$i/$msglist[$i-1]/g; }

     if ( $args =~ /\$msg\d/ )
       {
       tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n")
     if ( $args =~ /\$msg\d/ )
       {
       tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n")


@@ -2226,31 +2283,24 @@ elsif (/^((?i:[A-Z\d_]+=\S+\s+)+)?(\d+)?\s*(sudo(?:\s+-u\s+(\w+))?\s+)?exim(_\S+
     }
   elsif ($cmd =~ /\s-DSERVER=wait:(\d+)\s/)
     {
     }
   elsif ($cmd =~ /\s-DSERVER=wait:(\d+)\s/)
     {

+
+    # The port and the $dynamic_socket was already allocated while parsing the
+    # script file, where -DSERVER=wait:PORT_DYNAMIC was encountered.
+

     my $listen_port = $1;
     my $listen_port = $1;

-    my $waitmode_sock = new FileHandle;

     if ($debug) { printf ">> wait-mode daemon: $cmd\n"; }
     run_system("sudo mkdir spool/log 2>/dev/null");
     run_system("sudo chown $parm_eximuser:$parm_eximgroup spool/log");
 
     if ($debug) { printf ">> wait-mode daemon: $cmd\n"; }
     run_system("sudo mkdir spool/log 2>/dev/null");
     run_system("sudo chown $parm_eximuser:$parm_eximgroup spool/log");
 

-    my ($s_ip,$s_port) = ('127.0.0.1', $listen_port);
-    my $sin = sockaddr_in($s_port, inet_aton($s_ip))
-        or die "** Failed packing $s_ip:$s_port\n";
-    socket($waitmode_sock, PF_INET, SOCK_STREAM, getprotobyname('tcp'))
-        or die "** Unable to open socket $s_ip:$s_port: $!\n";
-    setsockopt($waitmode_sock, SOL_SOCKET, SO_REUSEADDR, 1)
-        or die "** Unable to setsockopt(SO_REUSEADDR): $!\n";
-    bind($waitmode_sock, $sin)
-        or die "** Unable to bind socket ($s_port): $!\n";
-    listen($waitmode_sock, 5);

     my $pid = fork();
     if (not defined $pid) { die "** fork failed: $!\n" }
     if (not $pid) {
       close(STDIN);
     my $pid = fork();
     if (not defined $pid) { die "** fork failed: $!\n" }
     if (not $pid) {
       close(STDIN);

-      open(STDIN, "<&", $waitmode_sock) or die "** dup sock to stdin failed: $!\n";
-      close($waitmode_sock);
+      open(STDIN, '<&', $dynamic_socket) or die "** dup sock to stdin failed: $!\n";
+      close($dynamic_socket);

       print "[$$]>> ${cmd}-server\n" if ($debug);
       exec "exec ${cmd}-server";
       print "[$$]>> ${cmd}-server\n" if ($debug);
       exec "exec ${cmd}-server";

-      exit(1);
+      die "Can't exec ${cmd}-server: $!\n";

     }
     while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; }   # Ignore any input
     select(undef, undef, undef, 0.3);             # Let the daemon get going
     }
     while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; }   # Ignore any input
     select(undef, undef, undef, 0.3);             # Let the daemon get going


@@ -2360,9 +2410,9 @@ print "Exim tester $testversion\n";
 # we map all (.../bin) to (.../sbin:.../bin)
 $ENV{PATH} = do {
   my %seen = map { $_, 1 } split /:/, $ENV{PATH};
 # we map all (.../bin) to (.../sbin:.../bin)
 $ENV{PATH} = do {
   my %seen = map { $_, 1 } split /:/, $ENV{PATH};

-  join ':' => map { m{(.*)/bin$} 
-                ? ( $seen{"$1/sbin"} ? () : ("$1/sbin"), $_) 
-                : ($_) } 
+  join ':' => map { m{(.*)/bin$}
+                ? ( $seen{"$1/sbin"} ? () : ("$1/sbin"), $_)
+                : ($_) }

       split /:/, $ENV{PATH};
 };
 
       split /:/, $ENV{PATH};
 };
 


@@ -2405,7 +2455,7 @@ else
 # as the path to the binary. If the first argument does not start with a
 # '/' but exists in the file system, it's assumed to be the Exim binary.
 
 # as the path to the binary. If the first argument does not start with a
 # '/' but exists in the file system, it's assumed to be the Exim binary.
 

-$parm_exim = (@ARGV > 0 && (-x $ARGV[0] or $ARGV[0] =~ m?^/?))? Cwd::abs_path(shift @ARGV) : "";
+($parm_exim, @ARGV) = Exim::Runtest::exim_binary(@ARGV);

 print "Exim binary is $parm_exim\n" if $parm_exim ne "";
 
 
 print "Exim binary is $parm_exim\n" if $parm_exim ne "";
 
 


@@ -2472,55 +2522,6 @@ $parm_cwd = Cwd::getcwd();
 # takes precedence; otherwise exim-snapshot takes precedence over any numbered
 # releases.
 
 # takes precedence; otherwise exim-snapshot takes precedence over any numbered
 # releases.
 

-if ($parm_exim eq "")
-  {
-  my($use_srcdir) = "";
-
-  opendir DIR, ".." || die "** Failed to opendir \"..\": $!\n";
-  while ($f = readdir(DIR))
-    {
-    my($srcdir);
-
-    # Try this directory if it is "exim4" or if it is exim-snapshot or exim-n.m
-    # possibly followed by -RCx where n.m is greater than any previously tried
-    # directory. Thus, we should choose the highest version of Exim that has
-    # been compiled.
-
-    if ($f eq "exim4" || $f eq "exim-snapshot" || $f eq 'src')
-      { $srcdir = $f; }
-    else
-      { $srcdir = $f
-        if ($f =~ /^exim-\d+\.\d+(-RC\d+)?$/ && $f gt $use_srcdir); }
-
-    # Look for a build directory with a binary in it. If we find a binary,
-    # accept this source directory.
-
-    if ($srcdir)
-      {
-      opendir SRCDIR, "../$srcdir" ||
-        die "** Failed to opendir \"$cwd/../$srcdir\": $!\n";
-      while ($f = readdir(SRCDIR))
-        {
-        if ($f =~ /^build-/ && -e "../$srcdir/$f/exim")
-          {
-          $use_srcdir = $srcdir;
-          $parm_exim = "$cwd/../$srcdir/$f/exim";
-          $parm_exim =~ s'/[^/]+/\.\./'/';
-          last;
-          }
-        }
-      closedir(SRCDIR);
-      }
-
-    # If we have found "exim4" or "exim-snapshot", that takes precedence.
-    # Otherwise, continue to see if there's a later version.
-
-    last if $use_srcdir eq "exim4" || $use_srcdir eq "exim-snapshot";
-    }
-  closedir(DIR);
-  print "Exim binary found in $parm_exim\n" if $parm_exim ne "";
-  }
-

 # If $parm_exim is still empty, ask the caller
 
 if ($parm_exim eq "")
 # If $parm_exim is still empty, ask the caller
 
 if ($parm_exim eq "")


@@ -2573,7 +2574,13 @@ while(<EXIMINFO>)
       $version =~ s/^\d+\K\./_/;
       $git =~ s/^exim-//i;
       $git =~ s/.*-\Kg([[:xdigit:]]+(?:-XX)?)/$1/;
       $version =~ s/^\d+\K\./_/;
       $git =~ s/^exim-//i;
       $git =~ s/.*-\Kg([[:xdigit:]]+(?:-XX)?)/$1/;

-      print "\n*** Version mismatch (Exim: $version vs. GIT: $git). ***\n\n"
+      print <<___
+
+*** Version mismatch
+*** Exim binary: $version
+*** Git        : $git
+
+___

         if not $version eq $git;
     }
   }
         if not $version eq $git;
     }
   }


@@ -2582,7 +2589,7 @@ while(<EXIMINFO>)
   $parm_trusted_config_list = $1 if /^TRUSTED_CONFIG_LIST:.*?"(.*?)"$/;
   ($parm_configure_owner, $parm_configure_group) = ($1, $2)
        if /^Configure owner:\s*(\d+):(\d+)/;
   $parm_trusted_config_list = $1 if /^TRUSTED_CONFIG_LIST:.*?"(.*?)"$/;
   ($parm_configure_owner, $parm_configure_group) = ($1, $2)
        if /^Configure owner:\s*(\d+):(\d+)/;

-  print "$_" if /wrong owner/;
+  print if /wrong owner/;

   }
 close(EXIMINFO);
 
   }
 close(EXIMINFO);
 


@@ -2596,6 +2603,7 @@ else
   print "Unable to extract exim_user from binary.\n";
   print "Check if Exim refused to run; if so, consider:\n";
   print "  TRUSTED_CONFIG_LIST ALT_CONFIG_PREFIX WHITELIST_D_MACROS\n";
   print "Unable to extract exim_user from binary.\n";
   print "Check if Exim refused to run; if so, consider:\n";
   print "  TRUSTED_CONFIG_LIST ALT_CONFIG_PREFIX WHITELIST_D_MACROS\n";

+  print "If debug permission denied, are you in the exim group?\n";

   die "Failing to get information from binary.\n";
   }
 
   die "Failing to get information from binary.\n";
   }
 


@@ -3043,7 +3051,7 @@ open(IFCONFIG, '-|', (grep { -x "$_/ip" } split /:/, $ENV{PATH}) ? 'ip address'
   or die "** Cannot run 'ip address' or 'ifconfig -a'\n";
 while (not ($parm_ipv4 and $parm_ipv6) and defined($_ = <IFCONFIG>))
   {
   or die "** Cannot run 'ip address' or 'ifconfig -a'\n";
 while (not ($parm_ipv4 and $parm_ipv6) and defined($_ = <IFCONFIG>))
   {

-  if (not $parm_ipv4 and /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)(?:\/\d+)\s/i)
+  if (not $parm_ipv4 and /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)(?:\/\d+)?\s/i)

     {
     next if $1 =~ /^(?:127|10)\./;
     $parm_ipv4 = $1;
     {
     next if $1 =~ /^(?:127|10)\./;
     $parm_ipv4 = $1;


@@ -3059,9 +3067,6 @@ close(IFCONFIG);
 
 # Use private IP addresses if there are no public ones.
 
 
 # Use private IP addresses if there are no public ones.
 

-$parm_ipv4 = '172.10.10.1' if not defined $parm_ipv4;
-$parm_ipv6 = 'fd0a:c2ea:abfa::1' if not defined $parm_ipv6;
-

 # If either type of IP address is missing, we need to set the value to
 # something other than empty, because that wrecks the substitutions. The value
 # is reflected, so use a meaningful string. Set appropriate options for the
 # If either type of IP address is missing, we need to set the value to
 # something other than empty, because that wrecks the substitutions. The value
 # is reflected, so use a meaningful string. Set appropriate options for the


@@ -3135,8 +3140,15 @@ if ($parm_ipv6 =~ /^[\da-f]/)
 
 chomp($temp = `hostname`);
 die "'hostname' didn't return anything\n" unless defined $temp and length $temp;
 
 chomp($temp = `hostname`);
 die "'hostname' didn't return anything\n" unless defined $temp and length $temp;

-$parm_hostname = (gethostbyname($temp))[0];
-$parm_hostname = "no.host.name.found" unless defined $parm_hostname and length $parm_hostname;
+if ($temp =~ /\./)
+  {
+  $parm_hostname = $temp;
+  }
+else
+  {
+  $parm_hostname = (gethostbyname($temp))[0];
+  $parm_hostname = "no.host.name.found" unless defined $parm_hostname and length $parm_hostname;
+  }

 print "Hostname is $parm_hostname\n";
 
 if ($parm_hostname !~ /\./)
 print "Hostname is $parm_hostname\n";
 
 if ($parm_hostname !~ /\./)


@@ -3579,7 +3591,12 @@ closedir(DIR);
 # contains ****. We open input from the terminal so that we can read responses
 # to prompts.
 
 # contains ****. We open input from the terminal so that we can read responses
 # to prompts.
 

-open(T, "/dev/tty") || tests_exit(-1, "Failed to open /dev/tty: $!");
+if (not $force_continue) {
+  # runtest needs to interact if we're not in continue
+  # mode. It does so by communicate to /dev/tty
+  open(T, "/dev/tty") or tests_exit(-1, "Failed to open /dev/tty: $!");
+}
+

 
 print "\nPress RETURN to run the tests: ";
 $_ = $force_continue ? "c" : <T>;
 
 print "\nPress RETURN to run the tests: ";
 $_ = $force_continue ? "c" : <T>;


@@ -3599,6 +3616,8 @@ foreach $test (@test_list)
   my($docheck) = 1;
   my($thistestdir) = substr($test, 0, -5);
 
   my($docheck) = 1;
   my($thistestdir) = substr($test, 0, -5);
 

+  $dynamic_socket->close() if $dynamic_socket;
+

   if ($lasttestdir ne $thistestdir)
     {
     $gnutls = 0;
   if ($lasttestdir ne $thistestdir)
     {
     $gnutls = 0;


@@ -3667,6 +3686,7 @@ foreach $test (@test_list)
     if (/^no_stdout_check/)  { $stdout_skip = 1; next; }
     if (/^rmfiltertest/)     { $rmfiltertest = 1; next; }
     if (/^sortlog/)          { $sortlog = 1; next; }
     if (/^no_stdout_check/)  { $stdout_skip = 1; next; }
     if (/^rmfiltertest/)     { $rmfiltertest = 1; next; }
     if (/^sortlog/)          { $sortlog = 1; next; }

+    if (/\bPORT_DYNAMIC\b/)  { $dynamic_socket = Exim::Runtest::dynamic_socket(); next; }

     }
   # Reset to beginning of file for per test interpreting/processing
   seek(SCRIPT, 0, 0);
     }
   # Reset to beginning of file for per test interpreting/processing
   seek(SCRIPT, 0, 0);


@@ -3913,4 +3933,3 @@ tests_exit(-1, "No runnable tests selected") if @test_list == 0;
 tests_exit(0);
 
 # End of runtest script
 tests_exit(0);
 
 # End of runtest script

-# vim: set sw=2 et :