# This message sometimes has a different number of seconds
s/forced fail after \d seconds/forced fail after d seconds/;
+ # This message may contain a different DBM library name
+ s/Failed to open \S+( \([^\)]+\))? file/Failed to open hintsdb file/;
+
# The message for a non-listening FIFO varies
s/:[^:]+: while opening named pipe/: Error: while opening named pipe/;
my($date1,$date2,$date3,$expired) = ($1,$2,$3,$4);
$expired = '' if !defined $expired;
- # Round the time-difference up to nearest even value
- my($increment) = ((date_seconds($date3) - date_seconds($date2) + 1) >> 1) << 1;
+ # Make time-difference minimum 2, and rounded up to even value
+ my($increment) = date_seconds($date3) - date_seconds($date2) + 1;
+ $increment = 2 if ($increment == 0);
+ $increment = ($increment >> 1) << 1;
# We used to use globally unique replacement values, but timing
# differences make this impossible. Just show the increment on the
s/\d\d-\w\w\w-\d\d\d\d\s\d\d:\d\d:\d\d\s[-+]\d\d\d\d,/06-Sep-1999 15:52:48 +0100,/gx;
# Dates/times in debugging output for writing retry records
- if (/^(\s+)first failed=(\d+) last try=(\d+) next try=(\d+) (.*)$/)
+ if (/^(.+)first failed=(\d+) last try=(\d+) next try=(\d+) (.*)$/)
{
my($next) = $4 - $3;
$_ = "$1first failed=dddd last try=dddd next try=+$next $5\n";
}
- s/^(\s*)now=\d+ first_failed=\d+ next_try=\d+ expired=(\w)/$1now=tttt first_failed=tttt next_try=tttt expired=$2/;
- s/^(\s*)received_time=\d+ diff=\d+ timeout=(\d+)/$1received_time=tttt diff=tttt timeout=$2/;
+ s/^(.*)now=\d+ first_failed=\d+ next_try=\d+ expired=(\w)/$1now=tttt first_failed=tttt next_try=tttt expired=$2/;
+ s/^(.*)received_time=\d+ diff=\d+ timeout=(\d+)/$1received_time=tttt diff=tttt timeout=$2/;
# Time to retry may vary
s/time to retry = \S+/time to retry = tttt/;
s/(TLS error on connection from .* \(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
next if /SSL verify error: depth=0 error=certificate not trusted/;
+ # OpenSSL 3.2.1
# OpenSSL 3.0.0
- s/TLS error \(D-H param setting .* error:\K.*dh key too small/xxxxxxxx:SSL routines::dh key too small/;
+ s/TLS\ error\ \(D-H\ param\ setting\ .*\ error:\K
+ .*
+ (?:dh\ key\ too\ small|unknown\ security\ bits)
+ /xxxxxxxx:SSL routines::dh key too small/x;
# OpenSSL 1.1.1
s/error:\K0B080074:x509 certificate routines:X509_check_private_key(?=:key values mismatch$)/05800074:x509 certificate routines:/;
s/^(Connection request from) \[.*:.*:.*\]$/$1 \[ipv6\]/;
# Hints DB use of lockfiles is provider-dependent
- s/Failed to open \K(?:hintsdb|database lock) file (.*\/spool\/db\/[^.]*)(?:.lockfile)?(?=(?: for reading)?: No such file or directory$)/hintsdb $1/;
+ s/Failed to open \K(?:hintsdb|database lock) file (.*\/spool\/db\/[^. ]*)(?:.lockfile)?(?: for reading)?(?=: No such file or directory$)/hintsdb $1/;
# openssl version variances
# Error lines on stdout from SSL contain process id values and file names.
next if /SSL verify error: depth=0 error=certificate not trusted/;
s/SSL3_READ_BYTES/ssl3_read_bytes/i;
s/CONNECT_CR_FINISHED/ssl3_read_bytes/i;
- s/^[[:xdigit:]]+:error:[[:xdigit:]]+(?:E[[:xdigit:]]+)?(:SSL routines:ssl3_read_bytes:[^:]+:).*(:SSL alert number \d\d)$/pppp:error:dddddddd$1\[...\]$2/;
+ s/^[[:xdigit:]]+:error:[[:xdigit:]]+(?:E[[:xdigit:]]+)?
+ (:SSL\ routines:ssl3_read_bytes:)
+ ssl(?:v3|\/tls)
+ ([^:]+:)
+ .*
+ (:SSL\ alert\ number\ \d\d)$
+ /pppp:error:dddddddd$1sslv3$2\[...\]$3/x;
s/^error:\K[^:]*:(SSL routines:ssl3_read_bytes:(tls|ssl)v\d+ alert)/dddddddd:$1/;
s/^error:\K[[:xdigit:]]+:SSL routines::(tlsv13 alert certificate required)$/dddddddd:SSL routines:ssl3_read_bytes:$1/;
- s/^error:\K[[:xdigit:]]+:SSL routines::((tlsv1|sslv3) alert (unknown ca|certificate revoked))$/dddddddd:SSL routines:ssl3_read_bytes:$1/;
+ s/^error:\K
+ [[:xdigit:]]+:SSL\ routines::
+ ((?:tlsv1|sslv3)\ alert\ (?:unknown\ ca|certificate\ revoked))$
+ /dddddddd:SSL routines:ssl3_read_bytes:$1/x;
+ s/^error:\K
+ [[:xdigit:]]+:SSL\ routines::
+ ssl\/tls\ (alert\ (?:unknown\ ca|certificate\ revoked))$
+ /dddddddd:SSL routines:ssl3_read_bytes:sslv3 $1/x;
# gnutls version variances
next if /^Error in the pull function./;
| Authenticators:
| Lookups(?:\(built-in\))?:
| Support\ for:
- | Routers:
+ | Routers\ \((?:built-in|dynamic)\):
| Transports:
| Malware:
| log\ selectors\ =
next if /lock(?:ing|ed) .*\/spool\/db\/[^.]+\.lockfile$/;
s/closed hints database\K and lockfile$//;
+ # Hints DBs with transactions are provider-dependent, and flow changes
+ # to take advantage of them need different opens and different flags.
+ # Drop all the debug output for opens and closes.
+ if (/EXIM_DBOPEN(_MULTI)?: file <.*spool\/db\/retry>/)
+ {
+ $_ = <IN>;
+ next if (/returned from EXIM_DBOPEN(_MULTI)?: 0x[[:xdigit:]]+$/);
+ $_ = <IN>;
+ <IN> if (/returned from EXIM_DBOPEN(_MULTI)?: \(nil\)$/);
+ next;
+ }
+ if (/EXIM_DBCLOSE(_MULTI)?/) { <IN>; next; }
+ next if /retaining retry hintsdb handle$/;
+ next if /using cached retry hintsdb (?:handle|nonpresence)$/;
+ if (/final close of cached retry db$/) { <IN>; <IN>; next; }
+ next if /dbfn_transaction_(?:start|commit)$/;
+
+ # Various hintsdb backends
+ s/(?:bdb|tdb|gdbm|ndbm|sqlite)
+ _open\(flags\ 0x(\d)
+ \ mode\ 0640\)
+ \ (?:No\ such\ file\ or\ directory|unable\ to\ open\ database\ file)$
+ /hintsdb_open(flags 0x$1 mode 0640) No such file or directory/x;
+
# Lines with a leading pid. Only handle >= 4-digit PIDs to avoid converting SMTP respose codes
s/^\s*(\d{4,})\s(?!(?:previous message|in\s|bytes remain in|SMTP accept process running))/new_value($1, "p%s", \$next_pid) . ' '/e;
+ # Connection IDs
+ s/connection_id: \K(\d+)$/new_value($1, "conn%s", \$next_conn)/e;
+
# Debugging lines for Exim terminations and process-generation
next if /(?:postfork: | fork(?:ing|ed) for )/;
next if /^tls_set_watch\(\) fail on '\/usr\/(?:lib\/ssl|local\/openssl3\/etc\/pki\/tls)\/cert.pem': No such file or directory$/;
# drop lookups
- next if /^$time_pid?(?: Lookups\ \(built-in\):
+ next if /^$time_pid?(?: Lookups\ \((?:built-in|dynamic)\):
+ |Loaded\ "[^.]+\.so"\ \(\d+\ lookup\ types\)
| Loading\ lookup\ modules\ from
| Loaded\ \d+\ lookup\ modules
| Total\ \d+\ lookups)/x;
next if /in\s(?:tls_advertise_hosts\?|hosts_require_tls\?)
\sno\s\((option\sunset|end\sof\slist)\)/x;
+ # non-TLS builds cannot have DANE
+
+ next if /lack of DNSSEC traceability precludes DANE$/;
+
# Skip auxiliary group lists because they will vary.
next if /auxiliary group list:/;
next if /failed to load readline:/;
- # Some DBM libraries seem to make DBM files on opening with O_RDWR without
- # O_CREAT; other's don't. In the latter case there is some debugging output
- # which is not present in the former. Skip the relevant lines (there are
- # three of them).
-
- if (/returned from EXIM_DBOPEN: \(nil\)/)
- {
- $_ .= <IN>;
- s?\Q$parm_cwd\E?TESTSUITE?g;
- if (/TESTSUITE\/spool\/db\/\S+ appears not to exist: trying to create/)
- { $_ = <IN>; next; }
- }
-
# Some tests turn on +expand debugging to check on expansions.
# Unfortunately, the Received: expansion varies, depending on whether TLS
# is compiled or not. So we must remove the relevant debugging if it is.
# so convert them all to "0"
s%(?<!lsearch)[^ ](?=TESTSUITE/aux-fixed/(?:0414.list[12]|0464.domains)$)%0%;
+ # Environment cleaning
+ next if /\w+ in keep_environment\? (yes|no)/;
+
+ # Sizes vary with test hostname
+ s/^cmd buf flush \d+ bytes/cmd buf flush ddd bytes/;
+
+ # Different platforms put different error messages into retry records
+ s/dbfn_write: key=.* datalen \K\d{2,3}$/nn/;
+ s/dbfn_read: size \K\d{2,3}(?= return$)/nnn/;
+
+ # Spool filesystem free space changes on different systems.
+ s/((?:spool|log) directory space =) -?\d+K (inodes =)\s*-?\d+/$1 nnnnnK $2 nnnnn/;
+
# CONTENT_SCAN
next if /try option acl_(?:not_)?smtp_mime$/;
next if /in tls_resumption_hosts\?/;
next if /RE '.outlook.com/;
- # Environment cleaning
- next if /\w+ in keep_environment\? (yes|no)/;
-
- # Sizes vary with test hostname
- s/^cmd buf flush \d+ bytes/cmd buf flush ddd bytes/;
-
- # Spool filesystem free space changes on different systems.
- s/((?:spool|log) directory space =) -?\d+K (inodes =)\s*-?\d+/$1 nnnnnK $2 nnnnn/;
-
# Non-TLS builds have different expansions for received_header_text
if (s/(with \$received_protocol)\}\} \$\{if def:tls_cipher \{\(\$tls_cipher\)\n$/$1/)
{
}
# Specific pointer values reported for DB operations change from run to run
- s/^(\s*returned from EXIM_DBOPEN: )(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
- s/^(\s*EXIM_DBCLOSE.)(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
+ s/(returned from EXIM_DBOPEN: )(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
+ s/(EXIM_DBCLOSE.)(0x)?[0-9a-f]+/${1}0xAAAAAAAA/;
# Platform-dependent output during MySQL startup
next if /PerconaFT file system space/;
%parm_support = @temp;
}
- elsif (/^Lookups \(built-in\): (.*)/)
+ elsif (/^Lookups \((?:built-in|dynamic)\): ?(.*)/)
{
print;
@temp = split /(\s+)/, $1;
push(@temp, ' ');
- %parm_lookups = @temp;
+ my %temp_lookups = @temp;
+ @parm_lookups{keys %temp_lookups} = values %temp_lookups;
}
elsif (/^Authenticators: (.*)/)
%parm_authenticators = @temp;
}
- elsif (/^Routers: (.*)/)
+ elsif (/^Routers \((?:built-in|dynamic)\): ?(.*)/)
{
print;
@temp = split /(\s+)/, $1;
push(@temp, ' ');
- %parm_routers = @temp;
+ my %temp_routers= @temp;
+ @parm_routers{keys %temp_routers} = values %temp_routers;
}
# Some transports have options, e.g. appendfile/maildir. For those, ensure
"sudo chgrp $parm_eximgroup eximdir/exim_exim;" .
"sudo chmod 06755 eximdir/exim_exim");
+# Copy any libraries that were built for dynamic load
+# Currently this is only for lookup methods
+
+($parm_exim_dir) = $parm_exim =~ m?^(.*)/exim?;
+
+while (my $file = glob("$parm_exim_dir/dynmodules/*.so")) {
+ my $base = basename($file);
+ cp("$file", "eximdir/");
+ system("sudo chmod 755 eximdir/$base");
+ }
+
##################################################
# Make copies of utilities we might need #
##################################################
# Certain of the tests make use of some of Exim's utilities. We do not need
# to be root to copy these.
-($parm_exim_dir) = $parm_exim =~ m?^(.*)/exim?;
-
$dbm_build_deleted = 0;
if (defined $parm_lookups{dbm} && not cp("$parm_exim_dir/exim_dbmbuild", "eximdir/exim_dbmbuild"))
{
$next_msgid = "aX";
$next_pid = 1234;
$next_port = 1111;
+ $next_conn = 1111;
$message_skip = 0;
$msglog_skip = 0;
$munge_skip = 0;