# Exim distribution directory before running the "make" command.
# Things that depend on the operating system have default settings in
-# OS/Makefile-Default, but these are overridden for some OS by files called
-# called OS/Makefile-<osname>. You can further override these by creating files
-# called Local/Makefile-<osname>, where "<osname>" stands for the name of your
-# operating system - look at the names in the OS directory to see which names
-# are recognized.
+# OS/Makefile-Default, but these are overridden for some OS by files
+# called OS/Makefile-<osname>. You can further override these settings by
+# creating files Local/Makefile-<osname>, and Local/Makefile-<build>.
+# The suffix "<osname>" stands for the name of your operating system - look
+# at the names in the OS directory to see which names are recognized,
+# and "<build>" is the content of the environment variable "build".
# However, if you are building Exim for a single OS only, you don't need to
# worry about setting up Local/Makefile-<osname>. Any build-time configuration
+###############################################################################
+# TLS #
+###############################################################################
+# Exim is built by default to support the SMTP STARTTLS command, which implements
+# Transport Layer Security using SSL (Secure Sockets Layer). This requires you
+# must install the OpenSSL library package or the GnuTLS library. Exim contains
+# no cryptographic code of its own.
+
+# If you are running Exim as a (TLS) server, just building it with TLS support
+# is all you need to do, as tls_advertise_hosts is set to '*' by
+# default. But you are advised to create a suiteable certificate, and tell
+# Exim about it by means of the tls_certificate and tls_privatekey run
+# time options, otherwise Exim will create a self signed certificate on
+# the fly. If you are running Exim only as a (TLS) client, building it with
+# TLS support is all you need to do.
+#
+# If you are using pkg-config then you should not need to worry where
+# the libraries and headers are installed, as the pkg-config .pc
+# specification should include all -L/-I information necessary.
+# Enabling the USE_*_PC options should be sufficient. If not using
+# pkg-config, then you have to specify the libraries, and you might
+# need to specify the locations too.
+
+# Uncomment the following lines if you want
+# to build Exim without any TLS support (either OpenSSL or GnuTLS):
+# DISABLE_TLS=yes
+# Unless you do this, you must define one of USE_OPENSSL or USE_GNUTLS
+# below.
+
+# If you are building with TLS, the library configuration must be done:
+
+# Uncomment this if you are using OpenSSL
+# USE_OPENSSL=yes
+# Uncomment one of these settings if you are using OpenSSL; pkg-config vs not
+# and an optional location.
+# USE_OPENSSL_PC=openssl
+# TLS_LIBS=-lssl -lcrypto
+# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
+
+# Uncomment this if you are using GnuTLS
+# USE_GNUTLS=yes
+# Uncomment one of these settings if you are using GnuTLS; pkg-config vs not
+# and an optional location. If you disable SUPPORT_DANE below, you
+# can remove the gnutls-dane references here. Earlier versions of GnuTLS
+# required libtasn1 and libgrypt also; add if needed.
+# USE_GNUTLS_PC=gnutls gnutls-dane
+# TLS_LIBS=-lgnutls -lgnutls-dane
+# TLS_LIBS=-L/usr/local/gnu/lib -lgnutls -ltasn1 -lgcrypt -lgnutls-dane
+
+# If using GnuTLS older than 2.10 and using pkg-config then note that Exim's
+# build process will require libgcrypt-config to exist in your $PATH. A
+# version that old is likely to become unsupported by Exim in 2017.
+
+# The security fix we provide with the gnutls_allow_auto_pkcs11 option
+# (4.82 PP/09) introduces a compatibility regression. The symbol is
+# not available if GnuTLS is build without p11-kit (--without-p11-kit
+# configure option). In this case use AVOID_GNUTLS_PKCS11=yes when
+# building Exim.
+# AVOID_GNUTLS_PKCS11=yes
+
+# If you are running Exim as a server, note that just building it with TLS
+# support is not all you need to do. You also need to set up a suitable
+# certificate, and tell Exim about it by means of the tls_certificate
+# and tls_privatekey run time options. You also need to set tls_advertise_hosts
+# to specify the hosts to which Exim advertises TLS support. On the other hand,
+# if you are running Exim only as a client, building it with TLS support
+# is all you need to do.
+
+# If you are using pkg-config then you should not need to worry where the
+# libraries and headers are installed, as the pkg-config .pc specification
+# should include all -L/-I information necessary. If not using pkg-config
+# then you might need to specify the locations too.
+
+# Additional libraries and include files are required for both OpenSSL and
+# GnuTLS. The TLS_LIBS settings above assume that the libraries are installed
+# with all your other libraries. If they are in a special directory, you may
+# need something like
+
+# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
+
+# or
+
+# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt -lgnutls-dane
+# If not using DANE under GnuTLS we can lose one library
+# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt
+
+# TLS_LIBS is included only on the command for linking Exim itself, not on any
+# auxiliary programs. If the include files are not in a standard place, you can
+# set TLS_INCLUDE to specify where they are, for example:
+
+# TLS_INCLUDE=-I/usr/local/openssl/include/
+# or
+# TLS_INCLUDE=-I/opt/gnu/include
+
+# You don't need to set TLS_INCLUDE if the relevant directories are already
+# specified in INCLUDE.
+
+
+# Uncomment the following line to remove support for TLS Resumption
+# DISABLE_TLS_RESUME=yes
+
+
###############################################################################
# THESE ARE THINGS YOU PROBABLY WANT TO SPECIFY #
###############################################################################
# least one type of lookup. You should consider whether you want to build
# the Exim monitor or not.
+# If you need to override how pkg-config finds configuration files for
+# installed software, then you can set that here; wildcards will be expanded.
+
+# PKG_CONFIG_PATH=/usr/local/opt/openssl/lib/pkgconfig : /opt/*/lib/pkgconfig
+
#------------------------------------------------------------------------------
# These settings determine which individual router drivers are included in the
# you perform upgrades and revert them. You should consider the benefit of
# embedding the Exim version number into LOOKUP_MODULE_DIR, so that you can
# maintain two concurrent sets of modules.
-#
+#
# *BEWARE*: ability to modify the files in LOOKUP_MODULE_DIR is equivalent to
# the ability to modify the Exim binary, which is often setuid root! The Exim
# developers only intend this functionality be used by OS software packagers
# library.
# NOTE: LDAP cannot be built as a module!
#
+# For Redis you need to have hiredis installed on your system
+# (https://github.com/redis/hiredis).
+# Depending on where it is installed you may have to edit the CFLAGS
+# (often += -I/usr/local/include) and LDFLAGS (-lhiredis) lines.
+
# If your system has pkg-config then the _INCLUDE/_LIBS setting can be
# handled for you automatically by also defining the _PC variable to reference
# the name of the pkg-config package, if such is available.
# LOOKUP_CDB=yes
# LOOKUP_DSEARCH=yes
# LOOKUP_IBASE=yes
+# LOOKUP_JSON=yes
# LOOKUP_LDAP=yes
+# LOOKUP_LMDB=yes
+
# LOOKUP_MYSQL=yes
+# LOOKUP_MYSQL_PC=mariadb
# LOOKUP_NIS=yes
# LOOKUP_NISPLUS=yes
# LOOKUP_ORACLE=yes
# LOOKUP_PASSWD=yes
# LOOKUP_PGSQL=yes
+# LOOKUP_REDIS=yes
# LOOKUP_SQLITE=yes
# LOOKUP_SQLITE_PC=sqlite3
# LOOKUP_WHOSON=yes
# LOOKUP_NWILDLSEARCH=yes
+# Some platforms may need this for LOOKUP_NIS:
+# LIBS += -lnsl
+
#------------------------------------------------------------------------------
# If you have set LOOKUP_LDAP=yes, you should set LDAP_LIB_TYPE to indicate
# which LDAP library you have. Unfortunately, though most of their functions
#------------------------------------------------------------------------------
-# The PCRE library is required for Exim. There is no longer an embedded
+# The PCRE2 library is required for Exim. There is no longer an embedded
# version of the PCRE library included with the source code, instead you
-# must use a system library or build your own copy of PCRE.
+# must use a system library or build your own copy of PCRE2.
# In either case you must specify the library link info here. If the
-# PCRE header files are not in the standard search path you must also
+# PCRE2 header files are not in the standard search path you must also
# modify the INCLUDE path (above)
#
# Use PCRE_CONFIG to query the pcre-config command (first found in $PATH)
# to find the include files and libraries, else use PCRE_LIBS and set INCLUDE
# too if needed.
-PCRE_CONFIG=yes
-# PCRE_LIBS=-lpcre
+PCRE2_CONFIG=yes
+# PCRE_LIBS=-lpcre2
+#------------------------------------------------------------------------------
+# Comment out the following line to remove DANE support.
+# Note: DANE support requires DNSSEC support (the default) and
+# SUPPORT_TLS (the default). For DANE under GnuTLS we need an additional
+# library. See TLS_LIBS or USE_GNUTLS_PC below.
+
+SUPPORT_DANE=yes
+
#------------------------------------------------------------------------------
# Additional libraries and include directories may be required for some
# lookup styles (e.g. LDAP, MYSQL or PGSQL). LOOKUP_LIBS is included only on
# the command for linking Exim itself, not on any auxiliary programs. You
# don't need to set LOOKUP_INCLUDE if the relevant directories are already
# specified in INCLUDE. The settings below are just examples; -lpq is for
-# PostgreSQL, -lgds is for Interbase, -lsqlite3 is for SQLite.
+# PostgreSQL, -lgds is for Interbase, -lsqlite3 is for SQLite, -lhiredis
+# is for Redis, -ljansson for JSON.
#
# You do not need to use this for any lookup information added via pkg-config.
# LOOKUP_INCLUDE=-I /usr/local/ldap/include -I /usr/local/mysql/include -I /usr/local/pgsql/include
-# LOOKUP_LIBS=-L/usr/local/lib -lldap -llber -lmysqlclient -lpq -lgds -lsqlite3
+# LOOKUP_INCLUDE +=-I /usr/local/include
+# LOOKUP_LIBS=-L/usr/local/lib -lldap -llber -lmysqlclient -lpq -lgds -lsqlite3 -llmdb
+
+#------------------------------------------------------------------------------
+# If you included LOOKUP_LMDB above you will need the library. Depending
+# on where installed you may also need an include directory
+#
+# LOOKUP_INCLUDE += -I/usr/local/include
+# LOOKUP_LIBS += -llmdb
#------------------------------------------------------------------------------
# Compiling the Exim monitor: If you want to compile the Exim monitor, a
# program that requires an X11 display, then EXIM_MONITOR should be set to the
-# value "eximon.bin". Comment out this setting to disable compilation of the
+# value "eximon.bin". De-comment this setting to enable compilation of the
# monitor. The locations of various X11 directories for libraries and include
# files are defaulted in the OS/Makefile-Default file, but can be overridden in
# local OS-specific make files.
-EXIM_MONITOR=eximon.bin
+# EXIM_MONITOR=eximon.bin
#------------------------------------------------------------------------------
# WITH_CONTENT_SCAN=yes
-# If you want to use the deprecated "demime" condition in the DATA ACL,
-# uncomment the line below. Doing so will also explicitly turn on the
-# WITH_CONTENT_SCAN option. If possible, use the MIME ACL instead of
-# the "demime" condition.
+# If you have content scanning you may wish to only include some of the scanner
+# interfaces. Uncomment any of these lines to remove that code.
-# WITH_OLD_DEMIME=yes
+# DISABLE_MAL_FFROTD=yes
+# DISABLE_MAL_FFROT6D=yes
+# DISABLE_MAL_DRWEB=yes
+# DISABLE_MAL_FSECURE=yes
+# DISABLE_MAL_SOPHIE=yes
+# DISABLE_MAL_CLAM=yes
+# DISABLE_MAL_AVAST=yes
+# DISABLE_MAL_SOCK=yes
+# DISABLE_MAL_CMDLINE=yes
+
+# These scanners are claimed to be no longer existent.
+
+DISABLE_MAL_AVE=yes
+DISABLE_MAL_KAV=yes
+DISABLE_MAL_MKS=yes
-# If you're using ClamAV and are backporting fixes to an old version, instead
-# of staying current (which is the more usual approach) then you may need to
-# use an older API which uses a STREAM command, now deprecated, instead of
-# zINSTREAM. If you need to set this, please let the Exim developers know, as
-# if nobody reports a need for it, we'll remove this option and clean up the
-# code. zINSTREAM was introduced with ClamAV 0.95.
-#
-# WITH_OLD_CLAMAV_STREAM=yes
#------------------------------------------------------------------------------
-# By default Exim includes code to support DKIM (DomainKeys Identified
+# If built with TLS, Exim includes code to support DKIM (DomainKeys Identified
# Mail, RFC4871) signing and verification. Verification of signatures is
# turned on by default. See the spec for information on conditionally
# disabling it. To disable the inclusion of the entire feature, set
# By default, Exim has support for checking the AD bit in a DNS response, to
# determine if DNSSEC validation was successful. If your system libraries
# do not support that bit, then set DISABLE_DNSSEC to "yes"
-# Note: Enabling EXPERIMENTAL_DANE unconditionally overrides this setting.
+# Note: DNSSEC is required for DANE support.
# DISABLE_DNSSEC=yes
+# To disable support for Events set DISABLE_EVENT to "yes"
+# DISABLE_EVENT=yes
+
+
+# Uncomment this line to remove support for early pipelining, per
+# https://datatracker.ietf.org/doc/draft-harris-early-pipe/
+# DISABLE_PIPE_CONNECT=yes
+
+
+# Uncomment the following to remove the fast-ramp two-phase-queue-run support
+# DISABLE_QUEUE_RAMP=yes
+
+# Uncomment the following lines to add SRS (Sender Rewriting Scheme) support
+# using only native facilities.
+# SUPPORT_SRS=yes
+
#------------------------------------------------------------------------------
# Compiling Exim with experimental features. These are documented in
# Uncomment the following line to add support for talking to dccifd. This
# defaults the socket path to /usr/local/dcc/var/dccifd.
-# Doing so will also explicitly turn on the WITH_CONTENT_SCAN option.
+# This support also requires WITH_CONTENT_SCAN enabled.
# EXPERIMENTAL_DCC=yes
-# Uncomment the following lines to add SPF support. You need to have libspf2
-# installed on your system (www.libspf2.org). Depending on where it is installed
-# you may have to edit the CFLAGS and LDFLAGS lines.
-
-# EXPERIMENTAL_SPF=yes
-# CFLAGS += -I/usr/local/include
-# LDFLAGS += -lspf2
-
-# Uncomment the following lines to add SRS (Sender rewriting scheme) support.
-# You need to have libsrs_alt installed on your system (srs.mirtol.com).
-# Depending on where it is installed you may have to edit the CFLAGS and
-# LDFLAGS lines.
+# Uncomment the following line to add DMARC checking capability, implemented
+# using libopendmarc libraries. You must have SPF and DKIM support enabled also.
+# SUPPORT_DMARC=yes
+# CFLAGS += -I/usr/local/include
+# LDFLAGS += -lopendmarc
+# Uncomment the following if you need to change the default. You can
+# override it at runtime (main config option dmarc_tld_file)
+# DMARC_TLD_FILE=/etc/exim/opendmarc.tlds
+#
+# Library version libopendmarc-1.4.1-1.fc33.x86_64 (on Fedora 33) is known broken;
+# 1.3.2-3 works. It seems that the OpenDMARC project broke their API.
+# Use this option if you need to build with an old library (1.3.x)
+# DMARC_API=100300
-# EXPERIMENTAL_SRS=yes
-# CFLAGS += -I/usr/local/include
-# LDFLAGS += -lsrs_alt
+# Uncomment the following line to add ARC (Authenticated Received Chain)
+# support. You must have SPF and DKIM support enabled also.
+# EXPERIMENTAL_ARC=yes
# Uncomment the following lines to add Brightmail AntiSpam support. You need
# to have the Brightmail client SDK installed. Please check the experimental
# CFLAGS += -I/opt/brightmail/bsdk-6.0/include
# LDFLAGS += -lxml2_single -lbmiclient_single -L/opt/brightmail/bsdk-6.0/lib
-# Uncomment the following line to add DMARC checking capability, implemented
-# using libopendmarc libraries.
-# EXPERIMENTAL_DMARC=yes
-# CFLAGS += -I/usr/local/include
-# LDFLAGS += -lopendmarc
-
-
-# Uncomment the following line to support Events,
-# eg. for logging to a database.
-# EXPERIMENTAL_EVENT=yes
-
-# Uncomment the following line to add Redis lookup support
-# You need to have hiredis installed on your system (https://github.com/redis/hiredis).
-# Depending on where it is installed you may have to edit the CFLAGS and LDFLAGS lines.
-# EXPERIMENTAL_REDIS=yes
-# CFLAGS += -I/usr/local/include
-# LDFLAGS += -lhiredis
-
-# Uncomment the following line to enable Experimental Proxy Protocol
-# EXPERIMENTAL_PROXY=yes
+# Uncomment the following to include extra information in fail DSN message (bounces)
+# EXPERIMENTAL_DSN_INFO=yes
-# Uncomment the following line to enable support for checking certificate
-# ownership
-# EXPERIMENTAL_CERTNAMES=yes
-
-# Uncomment the following line to add DANE support
-# Note: Enabling this unconditionally overrides DISABLE_DNSSEC
-# EXPERIMENTAL_DANE=yes
-
-# Uncomment the following line to add SOCKS support
-# EXPERIMENTAL_SOCKS=yes
-
-# Uncomment the following to add Internationalisation features. You need to
-# have the IDN library installed.
-# EXPERIMENTAL_INTERNATIONAL=yes
-# LDFLAGS += -lidn
+# Uncomment the following line to add queuefile transport support
+# EXPERIMENTAL_QUEUEFILE=yes
###############################################################################
# THESE ARE THINGS YOU MIGHT WANT TO SPECIFY #
# That shim can set macros before .include'ing your main configuration file.
#
# As a strictly transient measure to ease migration to 4.73, the
-# WHITELIST_D_MACROS value definies a colon-separated list of macro-names
+# WHITELIST_D_MACROS value defines a colon-separated list of macro-names
# which are permitted to be overridden from the command-line which will be
# honoured by the Exim user. So these are macros that can persist to delivery
# time.
# AUTH_CRAM_MD5=yes
# AUTH_CYRUS_SASL=yes
# AUTH_DOVECOT=yes
+# AUTH_EXTERNAL=yes
# AUTH_GSASL=yes
# AUTH_GSASL_PC=libgsasl
# AUTH_HEIMDAL_GSSAPI=yes
# AUTH_HEIMDAL_GSSAPI_PC=heimdal-gssapi
+# AUTH_HEIMDAL_GSSAPI_PC=heimdal-gssapi heimdal-krb5
# AUTH_PLAINTEXT=yes
# AUTH_SPA=yes
# AUTH_TLS=yes
+# Heimdal through 1.5 required pkg-config 'heimdal-gssapi'; Heimdal 7.1
+# requires multiple pkg-config files to work with Exim, so the second example
+# above is needed.
#------------------------------------------------------------------------------
# If you specified AUTH_CYRUS_SASL above, you should ensure that you have the
# AUTH_LIBS=-lgsasl
# AUTH_LIBS=-lgssapi -lheimntlm -lkrb5 -lhx509 -lcom_err -lhcrypto -lasn1 -lwind -lroken -lcrypt
+# If using AUTH_GSASL with SCRAM methods, you should also be defining
+# SUPPORT_I18N to get standards-conformant support of utf8 normalization.
+
#------------------------------------------------------------------------------
# When Exim is decoding MIME "words" in header lines, most commonly for use
#
# but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM
# as well.
+#
+# nb: FreeBSD as of 4.89 defines LIBICONV_PLUG to pick up the system iconv
+# more reliably. If you explicitly want the libiconv Port then as well
+# as adding -liconv you'll want to unset LIBICONV_PLUG. If you actually need
+# this, let us know, but for now the Exim Maintainers are assuming that this
+# is uncommon and so you'll need to edit OS/os.h-FreeBSD yourself to remove
+# the define.
#------------------------------------------------------------------------------
# *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING ***
-#------------------------------------------------------------------------------
-# Exim can be built to support the SMTP STARTTLS command, which implements
-# Transport Layer Security using SSL (Secure Sockets Layer). To do this, you
-# must install the OpenSSL library package or the GnuTLS library. Exim contains
-# no cryptographic code of its own. Uncomment the following lines if you want
-# to build Exim with TLS support. If you don't know what this is all about,
-# leave these settings commented out.
-
-# This setting is required for any TLS support (either OpenSSL or GnuTLS)
-# SUPPORT_TLS=yes
-
-# Uncomment one of these settings if you are using OpenSSL; pkg-config vs not
-# USE_OPENSSL_PC=openssl
-# TLS_LIBS=-lssl -lcrypto
-
-# Uncomment the first and either the second or the third of these if you
-# are using GnuTLS. If you have pkg-config, then the second, else the third.
-# USE_GNUTLS=yes
-# USE_GNUTLS_PC=gnutls
-# TLS_LIBS=-lgnutls -ltasn1 -lgcrypt
-
-# The security fix we provide with the gnutls_allow_auto_pkcs11 option
-# (4.82 PP/09) introduces a compatibility regression. The symbol is
-# not available if GnuTLS is build without p11-kit (--without-p11-kit
-# configure option). In this case use AVOID_GNUTLS_PKCS11=yes when
-# building Exim.
-# AVOID_GNUTLS_PKCS11=yes
-
-# If you are running Exim as a server, note that just building it with TLS
-# support is not all you need to do. You also need to set up a suitable
-# certificate, and tell Exim about it by means of the tls_certificate
-# and tls_privatekey run time options. You also need to set tls_advertise_hosts
-# to specify the hosts to which Exim advertises TLS support. On the other hand,
-# if you are running Exim only as a client, building it with TLS support
-# is all you need to do.
-
-# If you are using pkg-config then you should not need to worry where the
-# libraries and headers are installed, as the pkg-config .pc specification
-# should include all -L/-I information necessary. If not using pkg-config
-# then you might need to specify the locations too.
-
-# Additional libraries and include files are required for both OpenSSL and
-# GnuTLS. The TLS_LIBS settings above assume that the libraries are installed
-# with all your other libraries. If they are in a special directory, you may
-# need something like
-
-# TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
-# or
-# TLS_LIBS=-L/opt/gnu/lib -lgnutls -ltasn1 -lgcrypt
-
-# TLS_LIBS is included only on the command for linking Exim itself, not on any
-# auxiliary programs. If the include files are not in a standard place, you can
-# set TLS_INCLUDE to specify where they are, for example:
-
-# TLS_INCLUDE=-I/usr/local/openssl/include/
-# or
-# TLS_INCLUDE=-I/opt/gnu/include
-
-# You don't need to set TLS_INCLUDE if the relevant directories are already
-# specified in INCLUDE.
-
-
#------------------------------------------------------------------------------
# The default distribution of Exim contains only the plain text form of the
# documentation. Other forms are available separately. If you want to install
# GNU/Linux -ldl is also needed.
+#------------------------------------------------------------------------------
+# Proxying.
+#
+# If you may want to use outbound (client-side) proxying, using Socks5,
+# uncomment the line below.
+
+# SUPPORT_SOCKS=yes
+
+# If you may want to use inbound (server-side) proxying, using Proxy Protocol,
+# uncomment the line below.
+
+# SUPPORT_PROXY=yes
+
+
+#------------------------------------------------------------------------------
+# Internationalisation.
+#
+# Uncomment the following to include Internationalisation features. This is the
+# SMTPUTF8 ESMTP extension, and associated facilities for handling UTF8 domain
+# and localparts, per RFC 3490 (IDNA2003).
+# You need to have the IDN library installed.
+# If you want IDNA2008 mappings per RFCs 5890, 6530 and 6533, you additionally
+# need libidn2 and SUPPORT_I18N_2008.
+
+# SUPPORT_I18N=yes
+# LDFLAGS += -lidn
+# SUPPORT_I18N_2008=yes
+# LDFLAGS += -lidn -lidn2
+
+
+#------------------------------------------------------------------------------
+# Uncomment the following lines to add SPF support. You need to have libspf2
+# installed on your system (www.libspf2.org). Depending on where it is installed
+# you may have to edit the CFLAGS and LDFLAGS lines.
+
+# SUPPORT_SPF=yes
+# CFLAGS += -I/usr/local/include
+# LDFLAGS += -lspf2
+
+
#------------------------------------------------------------------------------
# Support for authentication via Radius is also available. The Exim support,
# which is intended for use in conjunction with the SMTP AUTH facilities,
# Note that this option adds to the size of the Exim binary, because the
# dynamic loading library is not otherwise included.
+# If libreadline is not in the normal library paths, then because Exim is
+# setuid you'll need to ensure that the correct directory is stamped into
+# the binary so that dlopen will find it.
+# Eg, on macOS/Darwin with a third-party install of libreadline, perhaps:
+
+# EXTRALIBS_EXIM+=-Wl,-rpath,/usr/local/opt/readline/lib
+
#------------------------------------------------------------------------------
# Uncomment this setting to include IPv6 support.
# files, and thus be influenced by the value of TMPDIR. For this reason, when
# Exim starts, it checks the environment for TMPDIR, and if it finds it is set,
# it replaces the value with what is defined here. Commenting this setting
-# suppresses the check altogether.
+# suppresses the check altogether. Older installations call this macro
+# just TMPDIR, but this has side effects at build time. At runtime
+# TMPDIR is checked as before.
-TMPDIR="/tmp"
+EXIM_TMPDIR="/tmp"
#------------------------------------------------------------------------------
# ENABLE_DISABLE_FSYNC=yes
+#------------------------------------------------------------------------------
+# For development, add this to include code to time various stages and report.
+# CFLAGS += -DMEASURE_TIMING
+
+# For a very slightly smaller build, for constrained systems, uncomment this.
+# The feature involved is purely for debugging.
+
+# DISABLE_CLIENT_CMD_LOG=yes
+
# End of EDITME for Exim 4.
git://git.exim.org / exim.git / blobdiff