$ENV{USER} = getpwuid($>) if not exists $ENV{USER};
my ($parm_configure_owner, $parm_configure_group);
-my ($parm_ipv4, $parm_ipv6);
+my ($parm_ipv4, $parm_ipv6, $parm_ipv6_stripped);
my $parm_hostname;
###############################################################################
s/host\s\Q$parm_ipv6\E\s\[\Q$parm_ipv6\E\]/host ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6 [ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6]/;
s/\b\Q$parm_ipv4\E\b/ip4.ip4.ip4.ip4/g;
s/(^|\W)\K\Q$parm_ipv6\E/ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6/g;
+ s/(^|\W)\K\Q$parm_ipv6_stripped\E/ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6/g;
s/\b\Q$parm_ipv4r\E\b/ip4-reverse/g;
s/(^|\W)\K\Q$parm_ipv6r\E/ip6-reverse/g;
s/^(\s+host\s\S+\s+\[\S+\]) +$/$1 /;
next if /name=localhost address=::1/;
# drop pdkim debugging header
- next if /^PDKIM( <<<<<<<<<<<<<<<<<<<<<<<<<<<<<+|: no signatures)$/;
+ next if /^DKIM( <<<<<<<<<<<<<<<<<<<<<<<<<<<<<+|: no signatures)$/;
# Various other IPv6 lines must be omitted too
# are unset, because dane ain't always there.
next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
- # DISABLE_OCSP
+ # DISABLE_OCSP
next if /in hosts_requ(est|ire)_ocsp\? (no|yes)/;
# SUPPORT_PROXY
}
# Not all platforms build with DKIM enabled
- next if /^PDKIM >> Body data for hash, canonicalized/;
+ next if /^DKIM >> Body data for hash, canonicalized/;
# Not all platforms build with SPF enabled
next if /^(spf_conn_init|SPF_dns_exim_new|spf_compile\.c)/;
# Parts of DKIM-specific debug output depend on the time/date
next if /^date:\w+,\{SP\}/;
- next if /^PDKIM \[[^[]+\] (Header hash|b) computed:/;
+ next if /^DKIM \[[^[]+\] (Header hash|b) computed:/;
# Not all platforms support TCP Fast Open, and the compile omits the check
if (s/\S+ in hosts_try_fastopen\? (no \(option unset\)|yes \(matched "\*"\))\n$//)
if (/^([0-9: ]* # possible timestamp
Connecting\ to\ [^ ]+\ [^ ]+(\ from\ [^ ]+)?)\ \.\.\.
- \ .*TFO\ mode\
+ \ .*TFO\ mode\x20
(sendto,\ no\ data:\ EINPROGRESS # Linux
|connection\ attempt\ to\ [^,]+,\ 0\ data) # MacOS & no-support
$/x)
# Find this host's IP addresses - there may be many, of course, but we keep
# one of each type (IPv4 and IPv6).
+#XXX it would be good to avoid non-UP interfaces
open(IFCONFIG, '-|', (grep { -x "$_/ip" } split /:/, $ENV{PATH}) ? 'ip address' : 'ifconfig -a')
or die "** Cannot run 'ip address' or 'ifconfig -a'\n";
while (not ($parm_ipv4 and $parm_ipv6) and defined($_ = <IFCONFIG>))
{
+ if (/^(?:[0-9]+: )([^:]+): /) { $ifname = $1; }
+
if (not $parm_ipv4 and /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)(?:\/\d+)?\s/i)
{
- next if $1 =~ /^(?:127|10)\./;
+ # It would ne nice to be able to vary the /16 used for manyhome; we could take
+ # an option to runtest used here - but we'd also have to pass it on to fakens.
+ # Possibly an environment variable?
+ next if $1 eq '0.0.0.0' or $1 =~ /^(?:127|10\.250)\./;
$parm_ipv4 = $1;
}
if (not $parm_ipv6 and /^\s*inet6(?:\saddr)?:?\s?([abcdef\d:]+)(?:%[^ \/]+)?(?:\/\d+)?/i)
{
- next if $1 eq '::1' or $1 =~ /^fe80/i;
+ next if $1 eq '::' or $1 eq '::1' or $1 =~ /^ff00/i;
$parm_ipv6 = $1;
+ if ($1 =~ /^fe80/i) { $parm_ipv6 .= '%' . $ifname; }
}
}
close(IFCONFIG);
print "IPv4 address is $parm_ipv4\n";
print "IPv6 address is $parm_ipv6\n";
$parm_ipv6 =~ /^[^%\/]*/;
+# drop any %scope from the ipv6, for some uses
+($parm_ipv6_stripped = $parm_ipv6) =~ s/%.*//g;
# For munging test output, we need the reversed IP addresses.
$parm_ipv6r = $parm_ipv6; # Appropriate if not in use
if ($parm_ipv6 =~ /^[\da-f]/)
{
- my(@comps) = split /:/, $parm_ipv6;
+ my(@comps) = split /:/, $parm_ipv6_stripped;
my(@nibbles);
foreach $comp (@comps)
{
"; for queries that it cannot answer\n\n" .
"PASS ON NOT FOUND\n\n";
print OUT "$shortname A $parm_ipv4\n" if $have_ipv4;
- print OUT "$shortname AAAA $parm_ipv6\n" if $have_ipv6;
+ print OUT "$shortname AAAA $parm_ipv6_stripped\n" if $have_ipv6;
print OUT "\n; End\n";
close(OUT);
}
if ($have_ipv4 && $parm_ipv4 ne "127.0.0.1")
{
my(@components) = $parm_ipv4 =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)/;
- open(OUT, ">$parm_cwd/dnszones/db.ip4.$components[0]") ||
- tests_exit(-1,
- "Failed to open $parm_cwd/dnszones/db.ip4.$components[0]: $!");
- print OUT "; This is a dynamically constructed fake zone file.\n" .
- "; The zone is $components[0].in-addr.arpa.\n\n" .
- "$components[3].$components[2].$components[1] PTR $parm_hostname.\n\n" .
- "; End\n";
- close(OUT);
+
+ if ($components[0]=='10')
+ {
+ open(OUT, ">>$parm_cwd/dnszones/db.ip4.$components[0]") ||
+ tests_exit(-1, "Failed to open $parm_cwd/dnszones/db.ip4.$components[0]: $!");
+ print OUT "$components[3].$components[2].$components[1] PTR $parm_hostname.\n\n";
+ close(OUT);
+ }
+ else
+ {
+ open(OUT, ">$parm_cwd/dnszones/db.ip4.$components[0]") ||
+ tests_exit(-1,
+ "Failed to open $parm_cwd/dnszones/db.ip4.$components[0]: $!");
+ print OUT "; This is a dynamically constructed fake zone file.\n" .
+ "; The zone is $components[0].in-addr.arpa.\n\n" .
+ "$components[3].$components[2].$components[1] PTR $parm_hostname.\n\n" .
+ "; End\n";
+ close(OUT);
+ }
}
-if ($have_ipv6 && $parm_ipv6 ne "::1")
+if ($have_ipv6 && $parm_ipv6_stripped ne "::1")
{
- my($exp_v6) = $parm_ipv6;
+ my($exp_v6) = $parm_ipv6_stripped;
$exp_v6 =~ s/[^:]//g;
- if ( $parm_ipv6 =~ /^([^:].+)::$/ ) {
+ if ( $parm_ipv6_stripped =~ /^([^:].+)::$/ ) {
$exp_v6 = $1 . ':0' x (9-length($exp_v6));
- } elsif ( $parm_ipv6 =~ /^(.+)::(.+)$/ ) {
+ } elsif ( $parm_ipv6_stripped =~ /^(.+)::(.+)$/ ) {
$exp_v6 = $1 . ':0' x (8-length($exp_v6)) . ':' . $2;
- } elsif ( $parm_ipv6 =~ /^::(.+[^:])$/ ) {
+ } elsif ( $parm_ipv6_stripped =~ /^::(.+[^:])$/ ) {
$exp_v6 = '0:' x (9-length($exp_v6)) . $1;
} else {
- $exp_v6 = $parm_ipv6;
+ $exp_v6 = $parm_ipv6_stripped;
}
my(@components) = split /:/, $exp_v6;
my(@nibbles) = reverse (split /\s*/, shift @components);
git://git.exim.org / exim.git / blobdiff