.book
. /////////////////////////////////////////////////////////////////////////////
-. These definitions set some parameters and save some typing. Remember that
-. the <bookinfo> element must also be updated for each new edition.
+. These definitions set some parameters and save some typing.
+. Update the Copyright year (only) when changing content.
. /////////////////////////////////////////////////////////////////////////////
-.set previousversion "4.80"
-.set version "4.80"
+.set previousversion "4.85"
+.include ./local_params
.set ACL "access control lists (ACLs)"
.set I " "
+.macro copyyear
+2014
+.endmacro
. /////////////////////////////////////////////////////////////////////////////
. Additional xfpt markup used by this document, over and above the default
<bookinfo>
<title>Specification of the Exim Mail Transfer Agent</title>
<titleabbrev>The Exim MTA</titleabbrev>
-<date>17 May 2012</date>
+<date>
+.fulldate
+</date>
<author><firstname>Exim</firstname><surname>Maintainers</surname></author>
<authorinitials>EM</authorinitials>
<revhistory><revision>
- <revnumber>4.80</revnumber>
- <date>17 May 2012</date>
+.versiondatexml
<authorinitials>EM</authorinitials>
</revision></revhistory>
-<copyright><year>2012</year><holder>University of Cambridge</holder></copyright>
+<copyright><year>
+.copyyear
+ </year><holder>University of Cambridge</holder></copyright>
</bookinfo>
.literal off
.new
.cindex "documentation"
-This edition of the Exim specification applies to version &version; of Exim.
+This edition of the Exim specification applies to version &version() of Exim.
Substantive changes from the &previousversion; edition are marked in some
renditions of the document; this paragraph is so marked if the rendition is
capable of showing a change indicator.
.cindex "distribution" "signing details"
.cindex "distribution" "public key"
.cindex "public key for signed distribution"
-The distributions are currently signed with Nigel Metheringham's GPG key. The
-corresponding public key is available from a number of keyservers, and there is
-also a copy in the file &_nigel-pubkey.asc_&. The signatures for the tar bundles are
-in:
+The distributions will be PGP signed by an individual key of the Release
+Coordinator. This key will have a uid containing an email address in the
+&'exim.org'& domain and will have signatures from other people, including
+other Exim maintainers. We expect that the key will be in the "strong set" of
+PGP keys. There should be a trust path to that key from Nigel Metheringham's
+PGP key, a version of which can be found in the release directory in the file
+&_nigel-pubkey.asc_&. All keys used will be available in public keyserver pools,
+such as &'pool.sks-keyservers.net'&.
+
+At time of last update, releases were being made by Phil Pennock and signed with
+key &'0x403043153903637F'&, although that key is expected to be replaced in 2013.
+A trust path from Nigel's key to Phil's can be observed at
+&url(https://www.security.spodhuis.org/exim-trustpath).
+
+Releases have also been authorized to be performed by Todd Lyons who signs with
+key &'0xC4F4F94804D29EBA'&. A direct trust path exists between previous RE Phil
+Pennock and Todd Lyons through a common associate.
+
+The signatures for the tar bundles are in:
.display
&_exim-n.nn.tar.gz.asc_&
&_exim-n.nn.tar.bz2.asc_&
.cindex "incorporated code"
.cindex "regular expressions" "library"
.cindex "PCRE"
+.cindex "OpenDMARC"
A number of pieces of external code are included in the Exim distribution.
.ilist
SOFTWARE.
.endblockquote
+.next
+.cindex "opendmarc" "acknowledgment"
+The DMARC implementation uses the OpenDMARC library which is Copyrighted by
+The Trusted Domain Project. Portions of Exim source which use OpenDMARC
+derived code are indicated in the respective source files. The full OpenDMARC
+license is provided in the LICENSE.opendmarc file contained in the distributed
+source code.
+
.next
Many people have contributed code fragments, some large, some small, that were
not covered by any specific licence requirements. It is assumed that the
&%verify_recipient%&, which independently control the use of the router for
sender and recipient verification. You can set these options directly if
you want a router to be used for only one type of verification.
+Note that cutthrough delivery is classed as a recipient verification for this purpose.
.next
If the &%address_test%& option is set false, the router is skipped when Exim is
run with the &%-bt%& option to test an address routing. This can be helpful
.next
Routers can be designated for use only when verifying an address, as
opposed to routing it for delivery. The &%verify_only%& option controls this.
+Again, cutthrough delivery counts as a verification.
.next
Individual routers can be explicitly skipped when running the routers to
check an address given in the SMTP EXPN command (see the &%expn%& option).
.section "Unpacking" "SECID23"
Exim is distributed as a gzipped or bzipped tar file which, when unpacked,
creates a directory with the name of the current release (for example,
-&_exim-&version;_&) into which the following files are placed:
+&_exim-&version()_&) into which the following files are placed:
.table2 140pt
.irow &_ACKNOWLEDGMENTS_& "contains some acknowledgments"
the subnet 192.168.1.0/24, and from all hosts in &'friendly.domain.example'&.
All other connections are denied. The daemon name used by &'tcpwrappers'&
can be changed at build time by setting TCP_WRAPPERS_DAEMON_NAME in
-in &_Local/Makefile_&, or by setting tcp_wrappers_daemon_name in the
+&_Local/Makefile_&, or by setting tcp_wrappers_daemon_name in the
configure file. Consult the &'tcpwrappers'& documentation for
further details.
For the utility programs, old versions are renamed by adding the suffix &_.O_&
to their names. The Exim binary itself, however, is handled differently. It is
installed under a name that includes the version number and the compile number,
-for example &_exim-&version;-1_&. The script then arranges for a symbolic link
+for example &_exim-&version()-1_&. The script then arranges for a symbolic link
called &_exim_& to point to the binary. If you are updating a previous version
of Exim, the script takes care to ensure that the name &_exim_& is never absent
from the directory (as seen by other processes).
This option is an alias for &%-bV%& and causes version information to be
displayed.
-.new
.vitem &%-Ac%& &&&
&%-Am%&
.oindex "&%-Ac%&"
.oindex "&%-Am%&"
These options are used by Sendmail for selecting configuration files and are
ignored by Exim.
-.wen
.vitem &%-B%&<&'type'&>
.oindex "&%-B%&"
if this is required. If the &%bi_command%& option is not set, calling Exim with
&%-bi%& is a no-op.
-.new
. // Keep :help first, then the rest in alphabetical order
.vitem &%-bI:help%&
.oindex "&%-bI:help%&"
&`SIEVE`& capability response line. As the precise list may depend upon
compile-time build options, which this option will adapt to, this is the only
way to guarantee a correct response.
-.wen
.vitem &%-bm%&
.oindex "&%-bm%&"
.cindex "local message reception"
This option runs an Exim receiving process that accepts an incoming,
-locally-generated message on the current input. The recipients are given as the
+locally-generated message on the standard input. The recipients are given as the
command arguments (except when &%-t%& is also present &-- see below). Each
argument can be a comma-separated list of RFC 2822 addresses. This is the
default option for selecting the overall action of an Exim call; it is assumed
If a list of configuration files was supplied, the value that is output here
is the name of the file that was actually used.
-.new
.cindex "options" "hiding name of"
If the &%-n%& flag is given, then for most modes of &%-bP%& operation the
name will not be output.
-.wen
.cindex "daemon" "process id (pid)"
.cindex "pid (process id)" "of daemon"
.vitem &%-G%&
.oindex "&%-G%&"
.cindex "submission fixups, suppressing (command-line)"
-.new
This option is equivalent to an ACL applying:
.code
control = suppress_local_fixups
As this affects audit information, the caller must be a trusted user to use
this option.
-.wen
.vitem &%-h%&&~<&'number'&>
.oindex "&%-h%&"
no documentation for this option in Solaris 2.4 Sendmail, but the &'mailx'&
command in Solaris 2.4 uses it. See also &%-ti%&.
-.new
.vitem &%-L%&&~<&'tag'&>
.oindex "&%-L%&"
.cindex "syslog" "process name; set with flag"
effect, so early configuration file errors will not honour this flag.
The tag should not be longer than 32 characters.
-.wen
.vitem &%-M%&&~<&'message&~id'&>&~<&'message&~id'&>&~...
.oindex "&%-M%&"
by Exim in conjunction with the &%-MC%& option. It signifies that the
connection to the remote host has been authenticated.
+.new
+.vitem &%-MCD%&
+.oindex "&%-MCD%&"
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the &%-MC%& option. It signifies that the
+remote host supports the ESMTP &_DSN_& extension.
+.wen
+
.vitem &%-MCP%&
.oindex "&%-MCP%&"
This option is not intended for use by external callers. It is used internally
Provided
this error message is successfully sent, the Exim receiving process
exits with a return code of zero. If not, the return code is 2 if the problem
-is that the original message has no recipients, or 1 any other error. This is
-the default &%-oe%&&'x'& option if Exim is called as &'rmail'&.
+is that the original message has no recipients, or 1 for any other error.
+This is the default &%-oe%&&'x'& option if Exim is called as &'rmail'&.
.vitem &%-oem%&
.oindex "&%-oem%&"
using the same syntax as for &%-oMa%&. The interface address is placed in
&$received_ip_address$& and the port number, if present, in &$received_port$&.
+.vitem &%-oMm%&&~<&'message&~reference'&>
+.oindex "&%-oMm%&"
+.cindex "message reference" "message reference, specifying for local message"
+See &%-oMa%& above for general remarks about the &%-oM%& options. The &%-oMm%&
+option sets the message reference, e.g. message-id, and is logged during
+delivery. This is useful when some kind of audit trail is required to tie
+messages together. The format of the message reference is checked and will
+abort if the format is invalid. The option will only be accepted if exim is
+running in trusted mode, not as any regular user.
+
+The best example of a message reference is when Exim sends a bounce message.
+The message reference is the message-id of the original message for which Exim
+is sending the bounce.
+
.vitem &%-oMr%&&~<&'protocol&~name'&>
.oindex "&%-oMr%&"
.cindex "protocol, specifying for local message"
It sets the incoming protocol and host name (for trusted callers). The
host name and its colon can be omitted when only the protocol is to be set.
Note the Exim already has two private options, &%-pd%& and &%-ps%&, that refer
-to embedded Perl. It is therefore impossible to set a protocol value of &`p`&
+to embedded Perl. It is therefore impossible to set a protocol value of &`d`&
or &`s`& using this option (but that does not seem a real limitation).
.vitem &%-q%&
.vitem &%-Tqt%&&~<&'times'&>
.oindex "&%-Tqt%&"
-This an option that is exclusively for use by the Exim testing suite. It is not
+This is an option that is exclusively for use by the Exim testing suite. It is not
recognized when Exim is run normally. It allows for the setting up of explicit
&"queue times"& so that various warning/retry features can be tested.
It sets &%-x%& when calling the MTA from its &%mail%& command. Exim ignores
this option.
-.new
.vitem &%-X%&&~<&'logfile'&>
.oindex "&%-X%&"
This option is interpreted by Sendmail to cause debug information to be sent
to the named file. It is ignored by Exim.
-.wen
+
+.vitem &%-z%&&~<&'log-line'&>
+.oindex "&%-z%&"
+This option writes its argument to Exim's logfile.
+Use is restricted to administrators; the intent is for operational notes.
+Quotes should be used to maintain a multi-word item as a single argument,
+under most shells.
.endlist
.ecindex IIDclo1
1413 (hence their names):
.code
rfc1413_hosts = *
-rfc1413_query_timeout = 5s
+rfc1413_query_timeout = 0s
+.endd
+These settings cause Exim to avoid ident callbacks for all incoming SMTP calls.
+Few hosts offer RFC1413 service these days; calls have to be
+terminated by a timeout and this needlessly delays the startup
+of an incoming SMTP connection.
+If you have hosts for which you trust RFC1413 and need this
+information, you can change this.
+
+This line enables an efficiency SMTP option. It is negotiated by clients
+and not expected to cause problems but can be disabled if needed.
+.code
+prdr_enable = true
.endd
-These settings cause Exim to make ident callbacks for all incoming SMTP calls.
-You can limit the hosts to which these calls are made, or change the timeout
-that is used. If you set the timeout to zero, all ident calls are disabled.
-Although they are cheap and can provide useful information for tracing problem
-messages, some hosts and firewalls have problems with ident calls. This can
-result in a timeout instead of an immediate refused connection, leading to
-delays on starting up an incoming SMTP session.
When Exim receives messages over SMTP connections, it expects all addresses to
be fully qualified with a domain, as required by the SMTP definition. However,
.code
remote_smtp:
driver = smtp
+ hosts_try_prdr = *
.endd
-This transport is used for delivering messages over SMTP connections. All its
-options are defaulted. The list of remote hosts comes from the router.
+This transport is used for delivering messages over SMTP connections.
+The list of remote hosts comes from the router.
+The &%hosts_try_prdr%& option enables an efficiency SMTP option.
+It is negotiated between client and server
+and not expected to cause problems but can be disabled if needed.
+All other options are defaulted.
.code
local_delivery:
driver = appendfile
&`fail`& keyword causes a &'forced expansion failure'& &-- see section
&<<SECTforexpfai>>& for an explanation of what this means.
-The supported DNS record types are A, CNAME, MX, NS, PTR, SPF, SRV, and TXT,
+The supported DNS record types are A, CNAME, MX, NS, PTR, SPF, SRV, TLSA and TXT,
and, when Exim is compiled with IPv6 support, AAAA (and A6 if that is also
configured). If no type is given, TXT is assumed. When the type is PTR,
the data can be an IP address, written as normal; inversion and the addition of
If the data for a PTR record is not a syntactically valid IP address, it is not
altered and nothing is added.
-.cindex "MX record" "in &(dnsdb)& lookup"
-.cindex "SRV record" "in &(dnsdb)& lookup"
-For an MX lookup, both the preference value and the host name are returned for
-each record, separated by a space. For an SRV lookup, the priority, weight,
-port, and host name are returned for each record, separated by spaces.
-
For any record type, if multiple records are found (or, for A6 lookups, if a
single record leads to multiple addresses), the data is returned as a
concatenation, with newline as the default separator. The order, of course,
It is permitted to specify a space as the separator character. Further
white space is ignored.
+.cindex "MX record" "in &(dnsdb)& lookup"
+.cindex "SRV record" "in &(dnsdb)& lookup"
+For an MX lookup, both the preference value and the host name are returned for
+each record, separated by a space. For an SRV lookup, the priority, weight,
+port, and host name are returned for each record, separated by spaces.
+An alternate field separator can be specified using a comma after the main
+separator character, followed immediately by the field separator.
+
.cindex "TXT record" "in &(dnsdb)& lookup"
.cindex "SPF record" "in &(dnsdb)& lookup"
For TXT records with multiple items of data, only the first item is returned,
It is permitted to specify a space as the separator character. Further
white space is ignored.
+.section "Dnsdb lookup modifiers" "SECTdnsdb_mod"
+.cindex "dnsdb modifiers"
+.cindex "modifiers" "dnsdb"
+.cindex "options" "dnsdb"
+Modifiers for &(dnsdb)& lookups are givien by optional keywords,
+each followed by a comma,
+that may appear before the record type.
+
+The &(dnsdb)& lookup fails only if all the DNS lookups fail. If there is a
+temporary DNS error for any of them, the behaviour is controlled by
+a defer-option modifier.
+The possible keywords are
+&"defer_strict"&, &"defer_never"&, and &"defer_lax"&.
+With &"strict"& behaviour, any temporary DNS error causes the
+whole lookup to defer. With &"never"& behaviour, a temporary DNS error is
+ignored, and the behaviour is as if the DNS lookup failed to find anything.
+With &"lax"& behaviour, all the queries are attempted, but a temporary DNS
+error causes the whole lookup to defer only if none of the other lookups
+succeed. The default is &"lax"&, so the following lookups are equivalent:
+.code
+${lookup dnsdb{defer_lax,a=one.host.com:two.host.com}}
+${lookup dnsdb{a=one.host.com:two.host.com}}
+.endd
+Thus, in the default case, as long as at least one of the DNS lookups
+yields some data, the lookup succeeds.
+
+.cindex "DNSSEC" "dns lookup"
+Use of &(DNSSEC)& is controlled by a dnssec modifier.
+The possible keywords are
+&"dnssec_strict"&, &"dnssec_lax"&, and &"dnssec_never"&.
+With &"strict"& or &"lax"& DNSSEC information is requested
+with the lookup.
+With &"strict"& a response from the DNS resolver that
+is not labelled as authenticated data
+is treated as equivalent to a temporary DNS error.
+The default is &"never"&.
+
+See also the &$lookup_dnssec_authenticated$& variable.
+
+
.section "Pseudo dnsdb record types" "SECID66"
.cindex "MX record" "in &(dnsdb)& lookup"
By default, both the preference value and the host name are returned for
The authorization code can be &"Y"& for yes, &"N"& for no, &"X"& for explicit
authorization required but absent, or &"?"& for unknown.
+.cindex "A+" "in &(dnsdb)& lookup"
+The pseudo-type A+ performs an A6 lookup (if configured) followed by an AAAA
+and then an A lookup. All results are returned; defer processing
+(see below) is handled separately for each lookup. Example:
+.code
+${lookup dnsdb {>; a+=$sender_helo_name}}
+.endd
+
.section "Multiple dnsdb lookups" "SECID67"
In the previous sections, &(dnsdb)& lookups for a single domain are described.
in the same way that multiple DNS records for a single item are handled. A
different separator can be specified, as described above.
-The &(dnsdb)& lookup fails only if all the DNS lookups fail. If there is a
-temporary DNS error for any of them, the behaviour is controlled by
-an optional keyword followed by a comma that may appear before the record
-type. The possible keywords are &"defer_strict"&, &"defer_never"&, and
-&"defer_lax"&. With &"strict"& behaviour, any temporary DNS error causes the
-whole lookup to defer. With &"never"& behaviour, a temporary DNS error is
-ignored, and the behaviour is as if the DNS lookup failed to find anything.
-With &"lax"& behaviour, all the queries are attempted, but a temporary DNS
-error causes the whole lookup to defer only if none of the other lookups
-succeed. The default is &"lax"&, so the following lookups are equivalent:
-.code
-${lookup dnsdb{defer_lax,a=one.host.com:two.host.com}}
-${lookup dnsdb{a=one.host.com:two.host.com}}
-.endd
-Thus, in the default case, as long as at least one of the DNS lookups
-yields some data, the lookup succeeds.
-
LDAP connections, rather than the SSL-on-connect &`ldaps`&.
See the &%ldap_start_tls%& option.
+Starting with Exim 4.83, the initialization of LDAP with TLS is more tightly
+controlled. Every part of the TLS configuration can be configured by settings in
+&_exim.conf_&. Depending on the version of the client libraries installed on
+your system, some of the initialization may have required setting options in
+&_/etc/ldap.conf_& or &_~/.ldaprc_& to get TLS working with self-signed
+certificates. This revealed a nuance where the current UID that exim was
+running as could affect which config files it read. With Exim 4.83, these
+methods become optional, only taking effect if not specifically set in
+&_exim.conf_&.
+
.section "LDAP quoting" "SECID68"
.cindex "LDAP" "quoting"
&`USER `& set the DN, for authenticating the LDAP bind
&`PASS `& set the password, likewise
&`REFERRALS `& set the referrals parameter
+&`SERVERS `& set alternate server list for this query only
&`SIZE `& set the limit for the number of entries returned
&`TIME `& set the maximum waiting time for a query
.endd
The TIME parameter (also a number of seconds) is passed to the server to
set a server-side limit on the time taken to complete a search.
+The SERVERS parameter allows you to specify an alternate list of ldap servers
+to use for an individual lookup. The global ldap_servers option provides a
+default list of ldap servers, and a single lookup can specify a single ldap
+server to use. But when you need to do a lookup with a list of servers that is
+different than the default list (maybe different order, maybe a completely
+different set of servers), the SERVERS parameter allows you to specify this
+alternate list (colon-separated).
Here is an example of an LDAP query in an Exim lookup that uses some of these
values. This is a single line, folded to fit on the page:
strings, each preceded by the attribute name and an equals sign. Within the
quotes, the quote character, backslash, and newline are escaped with
backslashes, and commas are used to separate multiple values for the attribute.
+Any commas in attribute values are doubled
+(permitting treatment of the values as a comma-separated list).
Apart from the escaping, the string within quotes takes the same form as the
output when a single attribute is requested. Specifying no attributes is the
same as specifying all of an entry's attributes.
Here are some examples of the output format. The first line of each pair is an
LDAP query, and the second is the data that is returned. The attribute called
-&%attr1%& has two values, whereas &%attr2%& has only one value:
+&%attr1%& has two values, one of them with an embedded comma, whereas
+&%attr2%& has only one value:
.code
ldap:///o=base?attr1?sub?(uid=fred)
-value1.1, value1.2
+value1.1,value1,,2
ldap:///o=base?attr2?sub?(uid=fred)
value two
ldap:///o=base?attr1,attr2?sub?(uid=fred)
-attr1="value1.1, value1.2" attr2="value two"
+attr1="value1.1,value1,,2" attr2="value two"
ldap:///o=base??sub?(uid=fred)
-objectClass="top" attr1="value1.1, value1.2" attr2="value two"
+objectClass="top" attr1="value1.1,value1,,2" attr2="value two"
.endd
-The &%extract%& operator in string expansions can be used to pick out
-individual fields from data that consists of &'key'&=&'value'& pairs. You can
+You can
make use of Exim's &%-be%& option to run expansion tests and thereby check the
results of LDAP lookups.
+The &%extract%& operator in string expansions can be used to pick out
+individual fields from data that consists of &'key'&=&'value'& pairs.
+The &%listextract%& operator should be used to pick out individual values
+of attributes, even when only a single value is expected.
+The doubling of embedded commas allows you to use the returned data as a
+comma separated list (using the "<," syntax for changing the input list separator).
There are several types of pattern that require Exim to know the name of the
remote host. These are either wildcard patterns or lookups by name. (If a
complete hostname is given without any wildcarding, it is used to find an IP
-address to match against, as described in the section &<<SECThoslispatip>>&
+address to match against, as described in section &<<SECThoslispatip>>&
above.)
If the remote host name is not already known when Exim encounters one of these
.cindex "&`+include_unknown`&"
.cindex "&`+ignore_unknown`&"
-By default, Exim behaves as if the host does not match the list. This may not
-always be what you want to happen. To change Exim's behaviour, the special
-items &`+include_unknown`& or &`+ignore_unknown`& may appear in the list (at
-top level &-- they are not recognized in an indirected file).
+Exim parses a host list from left to right. If it encounters a permanent
+lookup failure in any item in the host list before it has found a match,
+Exim treats it as a failure and the default behavior is as if the host
+does not match the list. This may not always be what you want to happen.
+To change Exim's behaviour, the special items &`+include_unknown`& or
+&`+ignore_unknown`& may appear in the list (at top level &-- they are
+not recognized in an indirected file).
.ilist
If any item that follows &`+include_unknown`& requires information that
list. The effect of each one lasts until the next, or until the end of the
list.
+.section "Mixing wildcarded host names and addresses in host lists" &&&
+ "SECTmixwilhos"
+.cindex "host list" "mixing names and addresses in"
+
+This section explains the host/ip processing logic with the same concepts
+as the previous section, but specifically addresses what happens when a
+wildcarded hostname is one of the items in the hostlist.
+
+.ilist
+If you have name lookups or wildcarded host names and
+IP addresses in the same host list, you should normally put the IP
+addresses first. For example, in an ACL you could have:
+.code
+accept hosts = 10.9.8.7 : *.friend.example
+.endd
+The reason you normally would order it this way lies in the
+left-to-right way that Exim processes lists. It can test IP addresses
+without doing any DNS lookups, but when it reaches an item that requires
+a host name, it fails if it cannot find a host name to compare with the
+pattern. If the above list is given in the opposite order, the
+&%accept%& statement fails for a host whose name cannot be found, even
+if its IP address is 10.9.8.7.
+
+.next
+If you really do want to do the name check first, and still recognize the IP
+address, you can rewrite the ACL like this:
+.code
+accept hosts = *.friend.example
+accept hosts = 10.9.8.7
+.endd
+If the first &%accept%& fails, Exim goes on to try the second one. See chapter
+&<<CHAPACL>>& for details of ACLs. Alternatively, you can use
+&`+ignore_unknown`&, which was discussed in depth in the first example in
+this section.
+.endlist
+
.section "Temporary DNS errors when looking up host information" &&&
"SECTtemdnserr"
operator.
If the query contains a reference to &$sender_host_name$&, Exim automatically
-looks up the host name if has not already done so. (See section
+looks up the host name if it has not already done so. (See section
&<<SECThoslispatnam>>& for comments on finding host names.)
Historical note: prior to release 4.30, Exim would always attempt to find a
-.section "Mixing wildcarded host names and addresses in host lists" &&&
- "SECTmixwilhos"
-.cindex "host list" "mixing names and addresses in"
-If you have name lookups or wildcarded host names and IP addresses in the same
-host list, you should normally put the IP addresses first. For example, in an
-ACL you could have:
-.code
-accept hosts = 10.9.8.7 : *.friend.example
-.endd
-The reason for this lies in the left-to-right way that Exim processes lists.
-It can test IP addresses without doing any DNS lookups, but when it reaches an
-item that requires a host name, it fails if it cannot find a host name to
-compare with the pattern. If the above list is given in the opposite order, the
-&%accept%& statement fails for a host whose name cannot be found, even if its
-IP address is 10.9.8.7.
-
-If you really do want to do the name check first, and still recognize the IP
-address, you can rewrite the ACL like this:
-.code
-accept hosts = *.friend.example
-accept hosts = 10.9.8.7
-.endd
-If the first &%accept%& fails, Exim goes on to try the second one. See chapter
-&<<CHAPACL>>& for details of ACLs.
-
-
-
.section "Address lists" "SECTaddresslist"
surrounding the colons is ignored. For example:
.code
aol.com: spammer1 : spammer2 : ^[0-9]+$ :
-spammer3 : spammer4
+ spammer3 : spammer4
.endd
As in all colon-separated lists in Exim, a colon can be included in an item by
doubling.
Any unused are made empty. The variable &$acl_narg$& is set to the number of
arguments. The named ACL (see chapter &<<CHAPACL>>&) is called
and may use the variables; if another acl expansion is used the values
-are overwritten. If the ACL sets
+are restored after it returns. If the ACL sets
a value using a "message =" modifier and returns accept or deny, the value becomes
the result of the expansion.
-If no message was set and the ACL returned accept or deny
-the value is an empty string.
-If the ACL returned defer the result is a forced-fail. Otherwise the expansion fails.
+If no message is set and the ACL returns accept or deny
+the expansion result is an empty string.
+If the ACL returns defer the result is a forced-fail. Otherwise the expansion fails.
+
+
+.vitem "&*${certextract{*&<&'field'&>&*}{*&<&'certificate'&>&*}&&&
+ {*&<&'string2'&>&*}{*&<&'string3'&>&*}}*&"
+.cindex "expansion" "extracting cerificate fields"
+.cindex "&%certextract%&" "certificate fields"
+.cindex "certificate" "extracting fields"
+The <&'certificate'&> must be a variable of type certificate.
+The field name is expanded and used to retrive the relevant field from
+the certificate. Supported fields are:
+.display
+&`version `&
+&`serial_number `&
+&`subject `& RFC4514 DN
+&`issuer `& RFC4514 DN
+&`notbefore `& time
+&`notafter `& time
+&`sig_algorithm `&
+&`signature `&
+&`subj_altname `& tagged list
+&`ocsp_uri `& list
+&`crl_uri `& list
+.endd
+If the field is found,
+<&'string2'&> is expanded, and replaces the whole item;
+otherwise <&'string3'&> is used. During the expansion of <&'string2'&> the
+variable &$value$& contains the value that has been extracted. Afterwards, it
+is restored to any previous value it might have had.
+If {<&'string3'&>} is omitted, the item is replaced by an empty string if the
+key is not found. If {<&'string2'&>} is also omitted, the value that was
+extracted is used.
+
+Some field names take optional modifiers, appended and separated by commas.
+
+The field selectors marked as "RFC4514" above
+output a Distinguished Name string which is
+not quite
+parseable by Exim as a comma-separated tagged list
+(the exceptions being elements containin commas).
+RDN elements of a single type may be selected by
+a modifier of the type label; if so the expansion
+result is a list (newline-separated by default).
+The separator may be changed by another modifer of
+a right angle-bracket followed immediately by the new separator.
+Recognised RDN type labels include "CN", "O", "OU" and "DC".
+
+The field selectors marked as "time" above
+take an optional modifier of "int"
+for which the result is the number of seconds since epoch.
+Otherwise the result is a human-readable string
+in the timezone selected by the main "timezone" option.
+
+The field selectors marked as "list" above return a list,
+newline-separated by default,
+(embedded separator characters in elements are doubled).
+The separator may be changed by a modifier of
+a right angle-bracket followed immediately by the new separator.
+
+The field selectors marked as "tagged" above
+prefix each list element with a type string and an equals sign.
+Elements of only one type may be selected by a modifier
+which is one of "dns", "uri" or "mail";
+if so the elenment tags are omitted.
+
+If not otherwise noted field values are presented in human-readable form.
.vitem "&*${dlfunc{*&<&'file'&>&*}{*&<&'function'&>&*}{*&<&'arg'&>&*}&&&
{*&<&'arg'&>&*}...}*&"
&%strlen%&, which gives the length of a string.
+.vitem "&*${listextract{*&<&'number'&>&*}&&&
+ {*&<&'string1'&>&*}{*&<&'string2'&>&*}{*&<&'string3'&>&*}}*&"
+.cindex "expansion" "extracting list elements by number"
+.cindex "&%listextract%&" "extract list elements by number"
+.cindex "list" "extracting elements by number"
+The <&'number'&> argument must consist entirely of decimal digits,
+apart from an optional leading minus,
+and leading and trailing white space (which is ignored).
+
+After expansion, <&'string1'&> is interpreted as a list, colon-separated by
+default, but the separator can be changed in the usual way.
+
+The first field of the list is numbered one.
+If the number is negative, the fields are
+counted from the end of the list, with the rightmost one numbered -1.
+The numbered element of the list is extracted and placed in &$value$&,
+then <&'string2'&> is expanded as the result.
+
+If the modulus of the
+number is zero or greater than the number of fields in the string,
+the result is the expansion of <&'string3'&>.
+
+For example:
+.code
+${listextract{2}{x:42:99}}
+.endd
+yields &"42"&, and
+.code
+${listextract{-3}{<, x,42,99,& Mailer,,/bin/bash}{result: $value}}
+.endd
+yields &"result: 99"&.
+
+If {<&'string3'&>} is omitted, an empty string is used for string3.
+If {<&'string2'&>} is also omitted, the value that was
+extracted is used.
+You can use &`fail`& instead of {<&'string3'&>} as in a string extract.
+
+
.vitem "&*${lookup{*&<&'key'&>&*}&~*&<&'search&~type'&>&*&~&&&
{*&<&'file'&>&*}&~{*&<&'string1'&>&*}&~{*&<&'string2'&>&*}}*&"
This is the first of one of two different types of lookup item, which are both
.cindex "expansion" "inserting from a socket"
.cindex "socket, use of in expansion"
.cindex "&%readsocket%& expansion item"
-This item inserts data from a Unix domain or Internet socket into the expanded
+This item inserts data from a Unix domain or TCP socket into the expanded
string. The minimal way of using it uses just two arguments, as in these
examples:
.code
{*&<&'string2'&>&*}}*&"
.cindex "expansion" "running a command"
.cindex "&%run%& expansion item"
-The command and its arguments are first expanded separately, and then the
-command is run in a separate process, but under the same uid and gid. As in
-other command executions from Exim, a shell is not used by default. If you want
+The command and its arguments are first expanded as one string. The string is
+split apart into individual arguments by spaces, and then the command is run
+in a separate process, but under the same uid and gid. As in other command
+executions from Exim, a shell is not used by default. If the command requires
a shell, you must explicitly code it.
+Since the arguments are split by spaces, when there is a variable expansion
+which has an empty result, it will cause the situation that the argument will
+simply be omitted when the program is actually executed by Exim. If the
+script/program requires a specific number of arguments and the expanded
+variable could possibly result in this empty expansion, the variable must be
+quoted. This is more difficult if the expanded variable itself could result
+in a string containing quotes, because it would interfere with the quotes
+around the command arguments. A possible guard against this is to wrap the
+variable in the &%sg%& operator to change any quote marks to some other
+character.
+
The standard input for the command exists, but is empty. The standard output
and standard error are set to the same file descriptor.
.cindex "return code" "from &%run%& expansion"
command does not succeed. If both strings are omitted, the result is contents
of the standard output/error on success, and nothing on failure.
+.vindex "&$run_in_acl$&"
+The standard output/error of the command is put in the variable &$value$&.
+In this ACL example, the output of a command is logged for the admin to
+troubleshoot:
+.code
+warn condition = ${run{/usr/bin/id}{yes}{no}}
+ log_message = Output of id: $value
+.endd
+If the command requires shell idioms, such as the > redirect operator, the
+shell must be invoked directly, such as with:
+.code
+${run{/bin/bash -c "/usr/bin/id >/tmp/id"}{yes}{yes}}
+.endd
+
.vindex "&$runrc$&"
The return code from the command is put in the variable &$runrc$&, and this
remains set afterwards, so in a filter file you can do things like this:
+.vitem &*${sort{*&<&'string'&>&*}{*&<&'comparator'&>&*}{*&<&'extractor'&>&*}}*&
+.cindex sorting a list
+.cindex list sorting
+After expansion, <&'string'&> is interpreted as a list, colon-separated by
+default, but the separator can be changed in the usual way.
+The <&'comparator'&> argument is interpreted as the operator
+of a two-argument expansion condition.
+The numeric operators plus ge, gt, le, lt (and ~i variants) are supported.
+The comparison should return true when applied to two values
+if the first value should sort before the second value.
+The <&'extractor'&> expansion is applied repeatedly to elements of the list,
+the element being placed in &$item$&,
+to give values for comparison.
+
+The item result is a sorted list,
+with the original list separator,
+of the list elements (in full) of the original.
+
+Examples:
+.code
+${sort{3:2:1:4}{<}{$item}}
+.endd
+sorts a list of numbers, and
+.code
+${sort {${lookup dnsdb{>:,,mx=example.com}}} {<} {${listextract{1}{<,$item}}}}
+.endd
+will sort an MX lookup into priority order.
+
+
.vitem &*${substr{*&<&'string1'&>&*}{*&<&'string2'&>&*}{*&<&'string3'&>&*}}*&
.cindex "&%substr%& expansion item"
.cindex "substring extraction"
address. See the &*filter*&, &*map*&, and &*reduce*& items for ways of
processing lists.
+To clarify "list of addresses in RFC 2822 format" mentioned above, Exim follows
+a strict interpretation of header line formatting. Exim parses the bare,
+unquoted portion of an email address and if it finds a comma, treats it as an
+email address seperator. For the example header line:
+.code
+From: =?iso-8859-2?Q?Last=2C_First?= <user@example.com>
+.endd
+The first example below demonstrates that Q-encoded email addresses are parsed
+properly if it is given the raw header (in this example, &`$rheader_from:`&).
+It does not see the comma because it's still encoded as "=2C". The second
+example below is passed the contents of &`$header_from:`&, meaning it gets
+de-mimed. Exim sees the decoded "," so it treats it as &*two*& email addresses.
+The third example shows that the presence of a comma is skipped when it is
+quoted.
+.code
+# exim -be '${addresses:From: \
+=?iso-8859-2?Q?Last=2C_First?= <user@example.com>}'
+user@example.com
+# exim -be '${addresses:From: Last, First <user@example.com>}'
+Last:user@example.com
+# exim -be '${addresses:From: "Last, First" <user@example.com>}'
+user@example.com
+.endd
.vitem &*${base62:*&<&'digits'&>&*}*&
.cindex "&%base62%& expansion item"
be useful for processing the output of the MD5 and SHA-1 hashing functions.
+
+.vitem &*${hexquote:*&<&'string'&>&*}*&
+.cindex "quoting" "hex-encoded unprintable characters"
+.cindex "&%hexquote%& expansion item"
+This operator converts non-printable characters in a string into a hex
+escape form. Byte values between 33 (!) and 126 (~) inclusive are left
+as is, and other byte values are converted to &`\xNN`&, for example a
+byte value 127 is converted to &`\x7f`&.
+
+
.vitem &*${lc:*&<&'string'&>&*}*&
.cindex "case forcing in strings"
.cindex "string" "case forcing"
The string is interpreted as a list and the number of items is returned.
-.vitem &*${listnamed:*&<&'name'&>&*}*&&~and&~&*${list_*&<&'type'&>&*name'&>&*}*&
+.vitem &*${listnamed:*&<&'name'&>&*}*&&~and&~&*${listnamed_*&<&'type'&>&*:*&<&'name'&>&*}*&
.cindex "expansion" "named list"
.cindex "&%listnamed%& expansion item"
The name is interpreted as a named list and the content of the list is returned,
expanding any referenced lists, re-quoting as needed for colon-separation.
-If the optional type if given it must be one of "a", "d", "h" or "l"
+If the optional type is given it must be one of "a", "d", "h" or "l"
and selects address-, domain-, host- or localpart- lists to search among respectively.
Otherwise all types are searched in an undefined order and the first
matching list is returned.
.vitem &*${md5:*&<&'string'&>&*}*&
.cindex "MD5 hash"
.cindex "expansion" "MD5 hash"
+.cindex "certificate fingerprint"
.cindex "&%md5%& expansion item"
The &%md5%& operator computes the MD5 hash value of the string, and returns it
as a 32-digit hexadecimal number, in which any letters are in lower case.
for DNS. For example,
.code
${reverse_ip:192.0.2.4}
-${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.3}
+${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.127}
.endd
returns
.code
4.2.0.192
-3.0.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2
+f.7.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2
.endd
.vitem &*${sha1:*&<&'string'&>&*}*&
.cindex "SHA-1 hash"
.cindex "expansion" "SHA-1 hashing"
+.cindex "certificate fingerprint"
.cindex "&%sha2%& expansion item"
The &%sha1%& operator computes the SHA-1 hash value of the string, and returns
it as a 40-digit hexadecimal number, in which any letters are in upper case.
+.vitem &*${sha256:*&<&'certificate'&>&*}*&
+.cindex "SHA-256 hash"
+.cindex "certificate fingerprint"
+.cindex "expansion" "SHA-256 hashing"
+.cindex "&%sha256%& expansion item"
+The &%sha256%& operator computes the SHA-256 hash fingerprint of the
+certificate,
+and returns
+it as a 64-digit hexadecimal number, in which any letters are in upper case.
+Only arguments which are a single variable of certificate type are supported.
+
+
.vitem &*${stat:*&<&'string'&>&*}*&
.cindex "expansion" "statting a file"
.cindex "file" "extracting characteristics"
.cindex "expansion" "case forcing"
.cindex "&%uc%& expansion item"
This forces the letters in the string into upper-case.
+
+.vitem &*${utf8clean:*&<&'string'&>&*}*&
+.cindex "correction of invalid utf-8 sequences in strings"
+.cindex "utf-8" "utf-8 sequences"
+.cindex "incorrect utf-8"
+.cindex "expansion" "utf-8 forcing"
+.cindex "&%utf8clean%& expansion item"
+This replaces any invalid utf-8 sequence in the string by the character &`?`&.
.endlist
Any unused are made empty. The variable &$acl_narg$& is set to the number of
arguments. The named ACL (see chapter &<<CHAPACL>>&) is called
and may use the variables; if another acl expansion is used the values
-are overwritten. If the ACL sets
+are restored after it returns. If the ACL sets
a value using a "message =" modifier the variable $value becomes
the result of the expansion, otherwise it is empty.
If the ACL returns accept the condition is true; if deny, false.
.cindex "&%bool%& expansion condition"
This condition turns a string holding a true or false representation into
a boolean state. It parses &"true"&, &"false"&, &"yes"& and &"no"&
-(case-insensitively); also positive integer numbers map to true if non-zero,
+(case-insensitively); also integer numbers map to true if non-zero,
false if zero.
An empty string is treated as false.
Leading and trailing whitespace is ignored;
The value of &$item$& is saved and restored while &*forany*& or &*forall*& is
being processed, to enable these expansion items to be nested.
+To scan a named list, expand it with the &*listnamed*& operator.
+
.vitem &*ge&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
&*gei&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
Exim filter files include an &%if%& command with its own regular expression
matching condition.
+.vitem "&$acl_arg1$&, &$acl_arg2$&, etc"
+Within an acl condition, expansion condition or expansion item
+any arguments are copied to these variables,
+any unused variables being made empty.
+
.vitem "&$acl_c...$&"
Values can be placed in these variables by the &%set%& modifier in an ACL. They
can be given any name that starts with &$acl_c$& and is at least six characters
and can be accessed by filters, routers, and transports during subsequent
delivery.
+.vitem &$acl_narg$&
+Within an acl condition, expansion condition or expansion item
+this variable has the number of arguments.
+
.vitem &$acl_verify_message$&
.vindex "&$acl_verify_message$&"
After an address verification has failed, this variable contains the failure
process. However, a trusted user can override this by means of the &%-oMai%&
command line option.
-
+.vitem &$authenticated_fail_id$&
+.cindex "authentication" "fail" "id"
+.vindex "&$authenticated_fail_id$&"
+When an authentication attempt fails, the variable &$authenticated_fail_id$&
+will contain the failed authentication id. If more than one authentication
+id is attempted, it will contain only the last one. The variable is
+available for processing in the ACL's, generally the quit or notquit ACL.
+A message to a local recipient could still be accepted without requiring
+authentication, which means this variable could also be visible in all of
+the ACL's as well.
.vitem &$authenticated_sender$&
of times it has been compiled. This serves to distinguish different
compilations of the same version of the program.
+.new
+.vitem &$config_dir$&
+.vindex "&$config_dir$&"
+The directory name of the main configuration file. That is, the content of
+&$config_file$& with the last component stripped. The value does not
+contain the trailing slash. If &$config_file$& does not contain a slash,
+&$config_dir$& is ".".
+
+.vitem &$config_file$&
+.vindex "&$config_file$&"
+The name of the main configuration file Exim is using.
+.wen
+
.vitem &$demime_errorlevel$&
.vindex "&$demime_errorlevel$&"
This variable is available when Exim is compiled with
.vindex "&$exim_uid$&"
This variable contains the numerical value of the Exim user id.
+.new
+.vitem &$exim_version$&
+.vindex "&$exim_uid$&"
+This variable contains the version string of the Exim build.
+The first character is a major version number, currently 4.
+Then after a dot, the next group of digits is a minor version number.
+There may be other characters following the minor version.
+.wen
+
.vitem &$found_extension$&
.vindex "&$found_extension$&"
This variable is available when Exim is compiled with the
be terminated by colon or white space, because it may contain a wide variety of
characters. Note also that braces must &'not'& be used.
+.vitem &$headers_added$&
+.vindex "&$headers_added$&"
+Within an ACL this variable contains the headers added so far by
+the ACL modifier add_header (section &<<SECTaddheadacl>>&).
+The headers are a newline-separated list.
+
.vitem &$home$&
.vindex "&$home$&"
When the &%check_local_user%& option is set for a router, the user's home
.vindex "&$host_lookup_failed$&"
See &$host_lookup_deferred$&.
+.vitem &$host_port$&
+.vindex "&$host_port$&"
+This variable is set to the remote host's TCP port whenever &$host$& is set
+for an outbound connection.
+
.vitem &$inode$&
.vindex "&$inode$&"
the space value is -1. See also the &%check_log_space%& option.
+.vitem &$lookup_dnssec_authenticated$&
+.vindex "&$lookup_dnssec_authenticated$&"
+This variable is set after a DNS lookup done by
+a dnsdb lookup expansion, dnslookup router or smtp transport.
+It will be empty if &(DNSSEC)& was not requested,
+&"no"& if the result was not labelled as authenticated data
+and &"yes"& if it was.
+
.vitem &$mailstore_basename$&
.vindex "&$mailstore_basename$&"
This variable is set only when doing deliveries in &"mailstore"& format in the
contents of header lines is done.
.vitem &$message_id$&
-This is an old name for &$message_exim_id$&, which is now deprecated.
+This is an old name for &$message_exim_id$&. It is now deprecated.
.vitem &$message_linecount$&
.vindex "&$message_linecount$&"
values of &$received_ip_address$& and &$received_port$& are saved with any
messages that are received, thus making these variables available at delivery
time.
-
-&*Note:*& There are no equivalent variables for outgoing connections, because
-the values are unknown (unless they are explicitly set by options of the
-&(smtp)& transport).
+For outbound connections see &$sending_ip_address$&.
.vitem &$received_port$&
.vindex "&$received_port$&"
.vindex "&$return_size_limit$&"
This is an obsolete name for &$bounce_return_size_limit$&.
+.vitem &$router_name$&
+.cindex "router" "name"
+.cindex "name" "of router"
+.vindex "&$router_name$&"
+During the running of a router this variable contains its name.
+
.vitem &$runrc$&
.cindex "return code" "from &%run%& expansion"
.vindex "&$runrc$&"
.vitem &$sender_host_address$&
.vindex "&$sender_host_address$&"
-When a message is received from a remote host, this variable contains that
-host's IP address. For locally submitted messages, it is empty.
+When a message is received from a remote host using SMTP,
+this variable contains that
+host's IP address. For locally non-SMTP submitted messages, it is empty.
.vitem &$sender_host_authenticated$&
.vindex "&$sender_host_authenticated$&"
received. It is empty if there was no successful authentication. See also
&$authenticated_id$&.
-.new
.vitem &$sender_host_dnssec$&
.vindex "&$sender_host_dnssec$&"
-If &$sender_host_name$& has been populated (by reference, &%hosts_lookup%& or
+If an attempt to populate &$sender_host_name$& has been made
+(by reference, &%hosts_lookup%& or
otherwise) then this boolean will have been set true if, and only if, the
resolver library states that the reverse DNS was authenticated data. At all
other times, this variable is false.
It is likely that you will need to coerce DNSSEC support on in the resolver
library, by setting:
.code
-dns_use_dnssec = 1
+dns_dnssec_ok = 1
.endd
Exim does not perform DNSSEC validation itself, instead leaving that to a
If you have changed &%host_lookup_order%& so that &`bydns`& is not the first
mechanism in the list, then this variable will be false.
-.wen
.vitem &$sender_host_name$&
this depends upon the TLS implementation used.
If TLS has not been negotiated, the value will be 0.
+.vitem &$tls_in_ourcert$&
+.vindex "&$tls_in_ourcert$&"
+This variable refers to the certificate presented to the peer of an
+inbound connection when the message was received.
+It is only useful as the argument of a
+&%certextract%& expansion item, &%md5%&, &%sha1%& or &%sha256%& operator,
+or a &%def%& condition.
+
+.vitem &$tls_in_peercert$&
+.vindex "&$tls_in_peercert$&"
+This variable refers to the certificate presented by the peer of an
+inbound connection when the message was received.
+It is only useful as the argument of a
+&%certextract%& expansion item, &%md5%&, &%sha1%& or &%sha256%& operator,
+or a &%def%& condition.
+
+.vitem &$tls_out_ourcert$&
+.vindex "&$tls_out_ourcert$&"
+This variable refers to the certificate presented to the peer of an
+outbound connection. It is only useful as the argument of a
+&%certextract%& expansion item, &%md5%&, &%sha1%& or &%sha256%& operator,
+or a &%def%& condition.
+
+.vitem &$tls_out_peercert$&
+.vindex "&$tls_out_peercert$&"
+This variable refers to the certificate presented by the peer of an
+outbound connection. It is only useful as the argument of a
+&%certextract%& expansion item, &%md5%&, &%sha1%& or &%sha256%& operator,
+or a &%def%& condition.
+
.vitem &$tls_in_certificate_verified$&
.vindex "&$tls_in_certificate_verified$&"
This variable is set to &"1"& if a TLS certificate was verified when the
&<<CHAPTLS>>& for details of TLS support and chapter &<<CHAPsmtptrans>>& for
details of the &(smtp)& transport.
+.vitem &$tls_in_ocsp$&
+.vindex "&$tls_in_ocsp$&"
+When a message is received from a remote client connection
+the result of any OCSP request from the client is encoded in this variable:
+.code
+0 OCSP proof was not requested (default value)
+1 No response to request
+2 Response not verified
+3 Verification failed
+4 Verification succeeded
+.endd
+
+.vitem &$tls_out_ocsp$&
+.vindex "&$tls_out_ocsp$&"
+When a message is sent to a remote host connection
+the result of any OCSP request made is encoded in this variable.
+See &$tls_in_ocsp$& for values.
+
.vitem &$tls_in_peerdn$&
.vindex "&$tls_in_peerdn$&"
.vindex "&$tls_peerdn$&"
This variable contains the UTC date and time in &"Zulu"& format, as specified
by ISO 8601, for example: 20030221154023Z.
+.vitem &$transport_name$&
+.cindex "transport" "name"
+.cindex "name" "of transport"
+.vindex "&$transport_name$&"
+During the running of a transport, this variable contains its name.
+
.vitem &$value$&
.vindex "&$value$&"
This variable contains the result of an expansion lookup, extraction operation,
or external command, as described above. It is also used during a
&*reduce*& expansion.
+.vitem &$verify_mode$&
+.vindex "&$verify_mode$&"
+While a router or transport is being run in verify mode
+or for cutthrough delivery,
+contains "S" for sender-verification or "R" for recipient-verification.
+Otherwise, empty.
+
.vitem &$version_number$&
.vindex "&$version_number$&"
The version number of Exim.
following options:
.ilist
-&%daemon_smtp_ports%& contains a list of default ports. (For backward
-compatibility, this option can also be specified in the singular.)
+&%daemon_smtp_ports%& contains a list of default ports
+or service names.
+(For backward compatibility, this option can also be specified in the singular.)
.next
&%local_interfaces%& contains list of interface IP addresses on which to
listen. Each item may optionally also specify a port.
Exim supports the obsolete SSMTP protocol (also known as SMTPS) that was used
before the STARTTLS command was standardized for SMTP. Some legacy clients
still use this protocol. If the &%tls_on_connect_ports%& option is set to a
-list of port numbers, connections to those ports must use SSMTP. The most
+list of port numbers or service names,
+connections to those ports must use SSMTP. The most
common use of this option is expected to be
.code
tls_on_connect_ports = 465
.endd
To specify listening on the default port on specific interfaces only:
.code
-local_interfaces = 192.168.34.67 : 192.168.34.67
+local_interfaces = 10.0.0.67 : 192.168.34.67
.endd
&*Warning*&: Such a setting excludes listening on the loopback interfaces.
.row &%acl_smtp_auth%& "ACL for AUTH"
.row &%acl_smtp_connect%& "ACL for connection"
.row &%acl_smtp_data%& "ACL for DATA"
+.row &%acl_smtp_data_prdr%& "ACL for DATA, per-recipient"
.row &%acl_smtp_dkim%& "ACL for DKIM verification"
.row &%acl_smtp_etrn%& "ACL for ETRN"
.row &%acl_smtp_expn%& "ACL for EXPN"
.section "TLS" "SECID108"
.table2
.row &%gnutls_compat_mode%& "use GnuTLS compatibility mode"
-.new
-.row &%gnutls_enable_pkcs11%& "allow GnuTLS to autoload PKCS11 modules"
-.wen
+.row &%gnutls_allow_auto_pkcs11%& "allow GnuTLS to autoload PKCS11 modules"
.row &%openssl_options%& "adjust OpenSSL compatibility options"
.row &%tls_advertise_hosts%& "advertise TLS to these hosts"
.row &%tls_certificate%& "location of server certificate"
.row &%tls_crl%& "certificate revocation list"
.row &%tls_dh_max_bits%& "clamp D-H bit count suggestion"
.row &%tls_dhparam%& "DH parameters for server"
+.row &%tls_ocsp_file%& "location of server certificate status proof"
.row &%tls_on_connect_ports%& "specify SSMTP (SMTPS) ports"
.row &%tls_privatekey%& "location of server private key"
.row &%tls_remember_esmtp%& "don't reset after starting TLS"
.table2
.row &%accept_8bitmime%& "advertise 8BITMIME"
.row &%auth_advertise_hosts%& "advertise AUTH to these hosts"
+.row &%dsn_advertise_hosts%& "advertise DSN extensions to these hosts"
.row &%ignore_fromline_hosts%& "allow &""From ""& from these hosts"
.row &%ignore_fromline_local%& "allow &""From ""& from local SMTP"
.row &%pipelining_advertise_hosts%& "advertise pipelining to these hosts"
+.row &%prdr_enable%& "advertise PRDR to all hosts"
.row &%tls_advertise_hosts%& "advertise TLS to these hosts"
.endtable
.row &%disable_ipv6%& "do no IPv6 processing"
.row &%dns_again_means_nonexist%& "for broken domains"
.row &%dns_check_names_pattern%& "pre-DNS syntax check"
+.row &%dns_dnssec_ok%& "parameter for resolver"
.row &%dns_ipv4_lookup%& "only v4 lookup for these domains"
.row &%dns_retrans%& "parameter for resolver"
.row &%dns_retry%& "parameter for resolver"
-.new
-.row &%dns_use_dnssec%& "parameter for resolver"
-.wen
.row &%dns_use_edns0%& "parameter for resolver"
.row &%hold_domains%& "hold delivery for these domains"
.row &%local_interfaces%& "for routing checks"
.option accept_8bitmime main boolean true
.cindex "8BITMIME"
.cindex "8-bit characters"
+.cindex "log" "selectors"
+.cindex "log" "8BITMIME"
This option causes Exim to send 8BITMIME in its response to an SMTP
EHLO command, and to accept the BODY= parameter on MAIL commands.
However, though Exim is 8-bit clean, it is not a protocol converter, and it
&url(http://cr.yp.to/smtp/8bitmime.html)
.endd
+To log received 8BITMIME status use
+.code
+log_selector = +8bitmime
+.endd
+
.option acl_not_smtp main string&!! unset
.cindex "&ACL;" "for non-SMTP messages"
.cindex "non-SMTP messages" "ACLs for"
processed and the message itself has been received, but before the final
acknowledgment is sent. See chapter &<<CHAPACL>>& for further details.
+.new
+.option acl_smtp_data_prdr main string&!! accept
+.cindex "PRDR" "ACL for"
+.cindex "DATA" "PRDR ACL for"
+.cindex "&ACL;" "PRDR-related"
+.cindex "&ACL;" "per-user data processing"
+.wen
+This option defines the ACL that,
+if the PRDR feature has been negotiated,
+is run for each recipient after an SMTP DATA command has been
+processed and the message itself has been received, but before the
+acknowledgment is sent. See chapter &<<CHAPACL>>& for further details.
+
.option acl_smtp_etrn main string&!! unset
.cindex "ETRN" "ACL for"
This option defines the ACL that is run when an SMTP ETRN command is
.code
delay_warning = 2h:12h:99d
.endd
+Note that the option is only evaluated at the time a delivery attempt fails,
+which depends on retry and queue-runner configuration.
+Typically retries will be configured more frequently than warning messages.
.option delay_warning_condition main string&!! "see below"
.vindex "&$domain$&"
reversed and looked up in the reverse DNS, as described in more detail in
section &<<SECTverifyCSA>>&.
+
+.option dns_dnssec_ok main integer -1
+.cindex "DNS" "resolver options"
+.cindex "DNS" "DNSSEC"
+If this option is set to a non-negative number then Exim will initialise the
+DNS resolver library to either use or not use DNSSEC, overriding the system
+default. A value of 0 coerces DNSSEC off, a value of 1 coerces DNSSEC on.
+
+If the resolver library does not support DNSSEC then this option has no effect.
+
+
.option dns_ipv4_lookup main "domain list&!!" unset
.cindex "IPv6" "DNS lookup for AAAA records"
.cindex "DNS" "IPv6 lookup for AAAA records"
See &%dns_retrans%& above.
-.new
-.option dns_use_dnssec main integer -1
-.cindex "DNS" "resolver options"
-.cindex "DNS" "DNSSEC"
-If this option is set to a non-negative number then Exim will initialise the
-DNS resolver library to either use or not use DNSSEC, overriding the system
-default. A value of 0 coerces DNSSEC off, a value of 1 coerces DNSSEC on.
-
-If the resolver library does not support DNSSEC then this option has no effect.
-.wen
-
-
.option dns_use_edns0 main integer -1
.cindex "DNS" "resolver options"
.cindex "DNS" "EDNS0"
handled CR and LF characters in incoming messages. What happens now is
described in section &<<SECTlineendings>>&.
+.new
+.option dsn_advertise_hosts main "host list&!!" unset
+.cindex "bounce messages" "success"
+.cindex "DSN" "success"
+.cindex "Delivery Status Notification" "success"
+DSN extensions (RFC3461) will be advertised in the EHLO message to,
+and accepted from, these hosts.
+Hosts may use the NOTIFY and ENVID options on RCPT TO commands,
+and RET and ORCPT options on MAIL FROM commands.
+A NOTIFY=SUCCESS option requests success-DSN messages.
+A NOTIFY= option with no argument requests that no delay or failure DSNs
+are sent.
+.wen
+
.option dsn_from main "string&!!" "see below"
.cindex "&'From:'& header line" "in bounces"
.cindex "bounce messages" "&'From:'& line, specifying"
implementations of TLS.
-.new
-option gnutls_enable_pkcs11 main boolean unset
+option gnutls_allow_auto_pkcs11 main boolean unset
This option will let GnuTLS (2.12.0 or later) autoload PKCS11 modules with
the p11-kit configuration files in &_/etc/pkcs11/modules/_&.
See
-&url(http://www.gnu.org/software/gnutls/manual/gnutls.html#Smart-cards-and-HSMs)
+&url(http://www.gnutls.org/manual/gnutls.html#Smart-cards-and-HSMs)
for documentation.
-.wen
adjusted lightly. An unrecognised item will be detected at startup, by
invoking Exim with the &%-bV%& flag.
+The option affects Exim operating both as a server and as a client.
+
Historical note: prior to release 4.80, Exim defaulted this value to
"+dont_insert_empty_fragments", which may still be needed for compatibility
with some clients, but which lowers security by increasing exposure to
some now infamous attacks.
-An example:
+Examples:
.code
# Make both old MS and old Eudora happy:
openssl_options = -all +microsoft_big_sslv3_buffer \
+dont_insert_empty_fragments
+
+# Disable older protocol versions:
+openssl_options = +no_sslv2 +no_sslv3
.endd
Possible options may include:
.next
&`no_tlsv1_2`&
.next
+&`safari_ecdhe_ecdsa_bug`&
+.next
&`single_dh_use`&
.next
&`single_ecdh_use`&
&`tls_rollback_bug`&
.endlist
+As an aside, the &`safari_ecdhe_ecdsa_bug`& item is a misnomer and affects
+all clients connecting using the MacOS SecureTransport TLS facility prior
+to MacOS 10.8.4, including email clients. If you see old MacOS clients failing
+to negotiate TLS then this option value might help, provided that your OpenSSL
+release is new enough to contain this work-around. This may be a situation
+where you have to upgrade OpenSSL to get buggy clients working.
+
.option oracle_servers main "string list" unset
.cindex "Oracle" "server list"
not count as protocol errors (see &%smtp_max_synprot_errors%&).
+.option prdr_enable main boolean false
+.cindex "PRDR" "enabling on server"
+This option can be used to enable the Per-Recipient Data Response extension
+to SMTP, defined by Eric Hall.
+If the option is set, PRDR is advertised by Exim when operating as a server.
+If the client requests PRDR, and more than one recipient, for a message
+an additional ACL is called for each recipient after the message content
+is recieved. See section &<<SECTPRDRACL>>&.
+
.option preserve_message_logs main boolean false
.cindex "message logs" "preserving"
If this option is set, message log files are not deleted when messages are
This option is an obsolete synonym for &%bounce_return_size_limit%&.
-.option rfc1413_hosts main "host list&!!" *
+.new
+.option rfc1413_hosts main "host list&!!" @[]
.cindex "RFC 1413"
.cindex "host" "for RFC 1413 calls"
-RFC 1413 identification calls are made to any client host which matches an item
-in the list.
+RFC 1413 identification calls are made to any client host which matches
+an item in the list.
+The default value specifies just this host, being any local interface
+for the system.
+.wen
-.option rfc1413_query_timeout main time 5s
+.new
+.option rfc1413_query_timeout main time 0s
+.wen
.cindex "RFC 1413" "query timeout"
.cindex "timeout" "for RFC 1413 call"
This sets the timeout on RFC 1413 identification calls. If it is set to zero,
. Allow this long option name to split; give it unsplit as a fifth argument
. for the automatic .oindex that is generated by .option.
+. We insert " &~&~" which is both pretty nasty visually and results in
+. non-searchable text. HowItWorks.txt mentions an option for inserting
+. zero-width-space, which would be nicer visually and results in (at least)
+. html that Firefox will split on when it's forced to reflow (rather than
+. inserting a horizontal scrollbar). However, the text is still not
+. searchable. NM changed this occurrence for bug 1197 to no longer allow
+. the option name to split.
.option "smtp_accept_max_per_connection" main integer 1000 &&&
smtp_accept_max_per_connection
various &%-od%&&'x'& command line options.
-. Allow this long option name to split; give it unsplit as a fifth argument
-. for the automatic .oindex that is generated by .option.
+. See the comment on smtp_accept_max_per_connection
-.option "smtp_accept_queue_per_ &~&~connection" main integer 10 &&&
+.option "smtp_accept_queue_per_connection" main integer 10 &&&
smtp_accept_queue_per_connection
.cindex "queueing incoming messages"
.cindex "message" "queueing by message count"
See &%smtp_ratelimit_hosts%& above.
-.option smtp_receive_timeout main time 5m
+.option smtp_receive_timeout main time&!! 5m
.cindex "timeout" "for SMTP input"
.cindex "SMTP" "input timeout"
This sets a timeout value for SMTP reception. It applies to all forms of SMTP
The former means that Exim was expecting to read an SMTP command; the latter
means that it was in the DATA phase, reading the contents of a message.
+If the first character of the option is a &"$"& the option is
+expanded before use and may depend on
+&$sender_host_name$&, &$sender_host_address$& and &$sender_host_port$&.
+
.oindex "&%-os%&"
The value set by this option can be overridden by the
Some of these will be too small to be accepted by clients.
Some may be too large to be accepted by clients.
+The TLS protocol does not negotiate an acceptable size for this; clients tend
+to hard-drop connections if what is offered by the server is unacceptable,
+whether too large or too small, and there's no provision for the client to
+tell the server what these constraints are. Thus, as a server operator, you
+need to make an educated guess as to what is most likely to work for your
+userbase.
+
+Some known size constraints suggest that a bit-size in the range 2048 to 2236
+is most likely to maximise interoperability. The upper bound comes from
+applications using the Mozilla Network Security Services (NSS) library, which
+used to set its &`DH_MAX_P_BITS`& upper-bound to 2236. This affects many
+mail user agents (MUAs). The lower bound comes from Debian installs of Exim4
+prior to the 4.80 release, as Debian used to patch Exim to raise the minimum
+acceptable bound from 1024 to 2048.
+
+
+.option tls_ocsp_file main string&!! unset
+This option
+must if set expand to the absolute path to a file which contains a current
+status proof for the server's certificate, as obtained from the
+Certificate Authority.
+
.option tls_on_connect_ports main "string list" unset
This option specifies a list of incoming SSMTP (aka SMTPS) ports that should
See &%tls_verify_hosts%& below.
-.option tls_verify_certificates main string&!! unset
+.new
+.option tls_verify_certificates main string&!! system
.cindex "TLS" "client certificate verification"
.cindex "certificate" "verification of client"
-The value of this option is expanded, and must then be the absolute path to
-a file containing permitted certificates for clients that
-match &%tls_verify_hosts%& or &%tls_try_verify_hosts%&. Alternatively, if you
-are using OpenSSL, you can set &%tls_verify_certificates%& to the name of a
-directory containing certificate files. This does not work with GnuTLS; the
-option must be set to the name of a single file if you are using GnuTLS.
+The value of this option is expanded, and must then be either the
+word "system"
+or the absolute path to
+a file or directory containing permitted certificates for clients that
+match &%tls_verify_hosts%& or &%tls_try_verify_hosts%&.
+
+The "system" value for the option will use a
+system default location compiled into the SSL library.
+This is not available for GnuTLS versions preceding 3.0.20,
+and will be taken as empty; an explicit location
+must be specified.
+
+The use of a directory for the option value is not avilable for GnuTLS versions
+preceding 3.3.6 and a single file must be used.
+
+With OpenSSL the certificates specified
+explicitly
+either by file or directory
+are added to those given by the system default location.
+.wen
These certificates should be for the certificate authorities trusted, rather
than the public cert of individual clients. With both OpenSSL and GnuTLS, if
the value is a file then the certificates are sent by Exim as a server to
connecting clients, defining the list of accepted certificate authorities.
Thus the values defined should be considered public data. To avoid this,
-use OpenSSL with a directory.
+use the explicit directory version.
See &<<SECTtlssni>>& for discussion of when this option might be re-expanded.
+A forced expansion failure or setting to an empty string is equivalent to
+being unset.
+
.option tls_verify_hosts main "host list&!!" unset
.cindex "TLS" "client certificate verification"
of the other precondition options are common special cases that could in fact
be specified using &%condition%&.
+Historical note: We have &%condition%& on ACLs and on Routers. Routers
+are far older, and use one set of semantics. ACLs are newer and when
+they were created, the ACL &%condition%& process was given far stricter
+parse semantics. The &%bool{}%& expansion condition uses the same rules as
+ACLs. The &%bool_lax{}%& expansion condition uses the same rules as
+Routers. More pointedly, the &%bool_lax{}%& was written to match the existing
+Router rules processing behavior.
+
+This is best illustrated in an example:
+.code
+# If used in an ACL condition will fail with a syntax error, but
+# in a router condition any extra characters are treated as a string
+
+$ exim -be '${if eq {${lc:GOOGLE.com}} {google.com}} {yes} {no}}'
+true {yes} {no}}
+
+$ exim -be '${if eq {${lc:WHOIS.com}} {google.com}} {yes} {no}}'
+ {yes} {no}}
+.endd
+In each example above, the &%if%& statement actually ends after
+&"{google.com}}"&. Since no true or false braces were defined, the
+default &%if%& behavior is to return a boolean true or a null answer
+(which evaluates to false). The rest of the line is then treated as a
+string. So the first example resulted in the boolean answer &"true"&
+with the string &" {yes} {no}}"& appended to it. The second example
+resulted in the null output (indicating false) with the string
+&" {yes} {no}}"& appended to it.
+
+In fact you can put excess forward braces in too. In the router
+&%condition%&, Exim's parser only looks for &"{"& symbols when they
+mean something, like after a &"$"& or when required as part of a
+conditional. But otherwise &"{"& and &"}"& are treated as ordinary
+string characters.
+
+Thus, in a Router, the above expansion strings will both always evaluate
+true, as the result of expansion is a non-empty string which doesn't
+match an explicit false value. This can be tricky to debug. By
+contrast, in an ACL either of those strings will always result in an
+expansion error because the result doesn't look sufficiently boolean.
+
.option debug_print routers string&!! unset
.cindex "testing" "variables in drivers"
If this option is set and debugging is enabled (see the &%-d%& command line
-option), the string is expanded and included in the debugging output.
+option) or in address-testing mode (see the &%-bt%& command line option),
+the string is expanded and included in the debugging output.
If expansion of the string fails, the error message is written to the debugging
output, and Exim carries on processing.
This option is provided to help with checking out the values of variables and
variables it references. The output happens after checks for &%domains%&,
&%local_parts%&, and &%check_local_user%& but before any other preconditions
are tested. A newline is added to the text if it does not end with one.
+The variable &$router_name$& contains the name of the router.
to be used.
+.new
+.option dsn_lasthop routers boolean false
+.cindex "DSN" "success"
+.cindex "Delivery Status Notification" "success"
+If this option is set true, and extended DSN (RFC3461) processing is in effect,
+Exim will not pass on DSN requests to downstream DSN-aware hosts but will
+instead send a success DSN as if the next hop does not support DSN.
+Not effective on redirect routers.
+.wen
+
+
.option errors_to routers string&!! unset
.cindex "envelope sender"
-.option headers_add routers string&!! unset
+.option headers_add routers list&!! unset
.cindex "header lines" "adding"
.cindex "router" "adding header lines"
-This option specifies a string of text that is expanded at routing time, and
-associated with any addresses that are accepted by the router. However, this
+This option specifies a list of text headers,
+.new
+newline-separated (by default, changeable in the usual way),
+.wen
+that is associated with any addresses that are accepted by the router.
+Each item is separately expanded, at routing time. However, this
option has no effect when an address is just being verified. The way in which
the text is used to add header lines at transport time is described in section
&<<SECTheadersaddrem>>&. New header lines are not actually added until the
&"see"& the added header lines.
The &%headers_add%& option is expanded after &%errors_to%&, but before
-&%headers_remove%& and &%transport%&. If the expanded string is empty, or if
-the expansion is forced to fail, the option has no effect. Other expansion
+&%headers_remove%& and &%transport%&. If an item is empty, or if
+an item expansion is forced to fail, the item has no effect. Other expansion
failures are treated as configuration errors.
Unlike most options, &%headers_add%& can be specified multiple times
-.option headers_remove routers string&!! unset
+.option headers_remove routers list&!! unset
.cindex "header lines" "removing"
.cindex "router" "removing header lines"
-This option specifies a string of text that is expanded at routing time, and
-associated with any addresses that are accepted by the router. However, this
+This option specifies a list of text headers,
+.new
+colon-separated (by default, changeable in the usual way),
+.wen
+that is associated with any addresses that are accepted by the router.
+Each item is separately expanded, at routing time. However, this
option has no effect when an address is just being verified. The way in which
the text is used to remove header lines at transport time is described in
section &<<SECTheadersaddrem>>&. Header lines are not actually removed until
&"see"& the original header lines.
The &%headers_remove%& option is expanded after &%errors_to%& and
-&%headers_add%&, but before &%transport%&. If the expansion is forced to fail,
-the option has no effect. Other expansion failures are treated as configuration
+&%headers_add%&, but before &%transport%&. If an item expansion is forced to fail,
+the item has no effect. Other expansion failures are treated as configuration
errors.
Unlike most options, &%headers_remove%& can be specified multiple times
.cindex "EXPN" "with &%verify_only%&"
.oindex "&%-bv%&"
.cindex "router" "used only when verifying"
-If this option is set, the router is used only when verifying an address or
+If this option is set, the router is used only when verifying an address,
+delivering in cutthrough mode or
testing with the &%-bv%& option, not when actually doing a delivery, testing
with the &%-bt%& option, or running the SMTP EXPN command. It can be further
restricted to verifying only senders or recipients by means of
.option verify_recipient routers&!? boolean true
If this option is false, the router is skipped when verifying recipient
-addresses
+addresses,
+delivering in cutthrough mode
or testing recipient verification using &%-bv%&.
See section &<<SECTrouprecon>>& for a list of the order in which preconditions
are evaluated.
+See also the &$verify_mode$& variable.
.option verify_sender routers&!? boolean true
or testing sender verification using &%-bvs%&.
See section &<<SECTrouprecon>>& for a list of the order in which preconditions
are evaluated.
+See also the &$verify_mode$& variable.
.ecindex IIDgenoprou1
.ecindex IIDgenoprou2
+.option dnssec_request_domains dnslookup "domain list&!!" unset
+.cindex "MX record" "security"
+.cindex "DNSSEC" "MX lookup"
+.cindex "security" "MX lookup"
+.cindex "DNS" "DNSSEC"
+DNS lookups for domains matching &%dnssec_request_domains%& will be done with
+the dnssec request bit set.
+This applies to all of the SRV, MX A6, AAAA, A lookup sequence.
+
+
+
+.option dnssec_require_domains dnslookup "domain list&!!" unset
+.cindex "MX record" "security"
+.cindex "DNSSEC" "MX lookup"
+.cindex "security" "MX lookup"
+.cindex "DNS" "DNSSEC"
+DNS lookups for domains matching &%dnssec_request_domains%& will be done with
+the dnssec request bit set. Any returns not having the Authenticated Data bit
+(AD bit) set wil be ignored and logged as a host-lookup failure.
+This applies to all of the SRV, MX A6, AAAA, A lookup sequence.
+
+
+
.option mx_domains dnslookup "domain list&!!" unset
.cindex "MX record" "required to exist"
.cindex "SRV record" "required to exist"
files and pipes, and for generating autoreplies. See the &%file_transport%&,
&%pipe_transport%& and &%reply_transport%& descriptions below.
+.new
+If success DSNs have been requested
+.cindex "DSN" "success"
+.cindex "Delivery Status Notification" "success"
+redirection triggers one and the DSN options are not passed any further.
+.wen
+
.section "Redirection data" "SECID124"
.endd
is interpreted as a pipe with a rather strange command name, and no arguments.
-.new
Note that the above example assumes that the text comes from a lookup source
of some sort, so that the quotes are part of the data. If composing a
redirect router with a &%data%& option directly specifying this command, the
data itself, or avoid using this mechanism and instead create a custom
transport with the &%command%& option set and reference that transport from
an &%accept%& router.
-.wen
.next
.cindex "file" "in redirection list"
option is not working properly, &%debug_print%& could be used to output the
variables it references. A newline is added to the text if it does not end with
one.
-
+The variables &$transport_name$& and &$router_name$& contain the name of the
+transport and the router that called it.
.option delivery_date_add transports boolean false
.cindex "&'Delivery-date:'& header line"
&%user%& (see below).
-.option headers_add transports string&!! unset
+.option headers_add transports list&!! unset
.cindex "header lines" "adding in transport"
.cindex "transport" "header lines; adding"
-This option specifies a string of text that is expanded and added to the header
+This option specifies a list of text headers,
+.new
+newline-separated (by default, changeable in the usual way),
+.wen
+which are (separately) expanded and added to the header
portion of a message as it is transported, as described in section
&<<SECTheadersaddrem>>&. Additional header lines can also be specified by
routers. If the result of the expansion is an empty string, or if the expansion
for a transport; all listed headers are added.
-
.option headers_only transports boolean false
.cindex "transport" "header lines only"
.cindex "message" "transporting headers only"
checked, since this option does not automatically suppress them.
-.option headers_remove transports string&!! unset
+.option headers_remove transports list&!! unset
.cindex "header lines" "removing"
.cindex "transport" "header lines; removing"
-This option specifies a string that is expanded into a list of header names;
+This option specifies a list of header names,
+.new
+colon-separated (by default, changeable in the usual way);
+.wen
these headers are omitted from the message as it is transported, as described
in section &<<SECTheadersaddrem>>&. Header removal can also be specified by
-routers. If the result of the expansion is an empty string, or if the expansion
+routers.
+Each list item is separately expanded.
+If the result of the expansion is an empty string, or if the expansion
is forced to fail, no action is taken. Other expansion failures are treated as
errors and cause the delivery to be deferred.
Unlike most options, &%headers_remove%& can be specified multiple times
-for a router; all listed headers are added.
+for a router; all listed headers are removed.
.option transport_filter_timeout transports time 5m
.cindex "transport" "filter, timeout"
-When Exim is reading the output of a transport filter, it a applies a timeout
+When Exim is reading the output of a transport filter, it applies a timeout
that can be set by this option. Exceeding the timeout is normally treated as a
temporary delivery failure. However, if a transport filter is used with a
&(pipe)& transport, a timeout in the transport filter is treated in the same
.vindex "&$address_pipe$&"
A router redirects an address directly to a pipe command (for example, from an
alias or forward file). In this case, &$address_pipe$& contains the text of the
-pipe command, and the &%command%& option on the transport is ignored. If only
-one address is being transported (&%batch_max%& is not greater than one, or
-only one address was redirected to this pipe command), &$local_part$& contains
-the local part that was redirected.
+pipe command, and the &%command%& option on the transport is ignored unless
+&%force_command%& is set. If only one address is being transported
+(&%batch_max%& is not greater than one, or only one address was redirected to
+this pipe command), &$local_part$& contains the local part that was redirected.
.endlist
avoids any problems with spaces or shell metacharacters, and is of use when a
&(pipe)& transport is handling groups of addresses in a batch.
+If &%force_command%& is enabled on the transport, Special handling takes place
+for an argument that consists of precisely the text &`$address_pipe`&. It
+is handled similarly to &$pipe_addresses$& above. It is expanded and each
+argument is inserted in the argument list at that point
+&'as a separate argument'&. The &`$address_pipe`& item does not need to be
+the only item in the argument; in fact, if it were then &%force_command%&
+should behave as a no-op. Rather, it should be used to adjust the command
+run while preserving the argument vector separation.
+
After splitting up into arguments and expansion, the resulting command is run
in a subprocess directly from the transport, &'not'& under a shell. The
message that is being delivered is supplied on the standard input, and the
frozen in Exim's queue instead.
+.option force_command pipe boolean false
+.cindex "force command"
+.cindex "&(pipe)& transport", "force command"
+Normally when a router redirects an address directly to a pipe command
+the &%command%& option on the transport is ignored. If &%force_command%&
+is set, the &%command%& option will used. This is especially
+useful for forcing a wrapper or additional argument to be added to the
+command. For example:
+.code
+command = /usr/bin/remote_exec myhost -- $address_pipe
+force_command
+.endd
+
+Note that &$address_pipe$& is handled specially in &%command%& when
+&%force_command%& is set, expanding out to the original argument vector as
+separate items, similarly to a Unix shell &`"$@"`& construct.
+
.option ignore_status pipe boolean false
If this option is true, the status returned by the subprocess that is set up to
run the command is ignored, and Exim behaves as if zero had been returned.
details.
-.new
+.option dnssec_request_domains smtp "domain list&!!" unset
+.cindex "MX record" "security"
+.cindex "DNSSEC" "MX lookup"
+.cindex "security" "MX lookup"
+.cindex "DNS" "DNSSEC"
+DNS lookups for domains matching &%dnssec_request_domains%& will be done with
+the dnssec request bit set.
+This applies to all of the SRV, MX A6, AAAA, A lookup sequence.
+
+
+
+.option dnssec_require_domains smtp "domain list&!!" unset
+.cindex "MX record" "security"
+.cindex "DNSSEC" "MX lookup"
+.cindex "security" "MX lookup"
+.cindex "DNS" "DNSSEC"
+DNS lookups for domains matching &%dnssec_request_domains%& will be done with
+the dnssec request bit set. Any returns not having the Authenticated Data bit
+(AD bit) set wil be ignored and logged as a host-lookup failure.
+This applies to all of the SRV, MX A6, AAAA, A lookup sequence.
+
+
+
.option dscp smtp string&!! unset
.cindex "DCSP" "outbound"
This option causes the DSCP value associated with a socket to be set to one
that these values will have any effect, not be stripped by networking
equipment, or do much of anything without cooperation with your Network
Engineer and those of all network operators between the source and destination.
-.wen
.option fallback_hosts smtp "string list" unset
&<<CHAPSMTPAUTH>>& for details of authentication.
+.option hosts_request_ocsp smtp "host list&!!" *
+.cindex "TLS" "requiring for certain servers"
+Exim will request a Certificate Status on a
+TLS session for any host that matches this list.
+&%tls_verify_certificates%& should also be set for the transport.
+
+.option hosts_require_ocsp smtp "host list&!!" unset
+.cindex "TLS" "requiring for certain servers"
+Exim will request, and check for a valid Certificate Status being given, on a
+TLS session for any host that matches this list.
+&%tls_verify_certificates%& should also be set for the transport.
+
.option hosts_require_tls smtp "host list&!!" unset
.cindex "TLS" "requiring for certain servers"
Exim will insist on using a TLS session when delivering to any host that
unauthenticated. See also &%hosts_require_auth%&, and chapter
&<<CHAPSMTPAUTH>>& for details of authentication.
+.new
+.option hosts_try_prdr smtp "host list&!!" *
+.cindex "PRDR" "enabling, optional in client"
+This option provides a list of servers to which, provided they announce
+PRDR support, Exim will attempt to negotiate PRDR
+for multi-recipient messages.
+The option can usually be left as default.
+.wen
+
.option interface smtp "string list&!!" unset
.cindex "bind IP address"
.cindex "IP address" "binding"
permits this.
-.option multi_domain smtp boolean true
+.option multi_domain smtp boolean&!! true
.vindex "&$domain$&"
When this option is set, the &(smtp)& transport can handle a number of
addresses containing a mixture of different domains provided they all resolve
&$domain$& in an expansion for the transport, because it is set only when there
is a single domain involved in a remote delivery.
+.new
+It is expanded per-address and can depend on any of
+&$address_data$&, &$domain_data$&, &$local_part_data$&,
+&$host$&, &$host_address$& and &$host_port$&.
+.wen
.option port smtp string&!! "see below"
.cindex "port" "sending TCP/IP"
The Internet standards bodies strongly discourage use of this mode.
-.option retry_include_ip_address smtp boolean true
+.option retry_include_ip_address smtp boolean&!! true
Exim normally includes both the host name and the IP address in the key it
constructs for indexing retry data after a temporary delivery failure. This
means that when one of several IP addresses for a host is failing, it gets
However, in some dialup environments hosts are assigned a different IP address
each time they connect. In this situation the use of the IP address as part of
the retry key leads to undesirable behaviour. Setting this option false causes
-Exim to use only the host name. This should normally be done on a separate
-instance of the &(smtp)& transport, set up specially to handle the dialup
-hosts.
+Exim to use only the host name.
+.new
+Since it is expanded it can be made to depend on the host or domain.
+.wen
.option serialize_hosts smtp "host list&!!" unset
be the name of a file that contains a CRL in PEM format.
-.new
.option tls_dh_min_bits smtp integer 1024
.cindex "TLS" "Diffie-Hellman minimum acceptable size"
When establishing a TLS session, if a ciphersuite which uses Diffie-Hellman
will fail.
Only supported when using GnuTLS.
-.wen
.option tls_privatekey smtp string&!! unset
in clear.
-.option tls_verify_certificates smtp string&!! unset
+.new
+.option tls_try_verify_hosts smtp "host list&!!" *
+.wen
+.cindex "TLS" "server certificate verification"
+.cindex "certificate" "verification of server"
+This option gives a list of hosts for which, on encrypted connections,
+certificate verification will be tried but need not succeed.
+The &%tls_verify_certificates%& option must also be set.
+Note that unless the host is in this list
+TLS connections will be denied to hosts using self-signed certificates
+when &%tls_verify_certificates%& is matched.
+The &$tls_out_certificate_verified$& variable is set when
+certificate verification succeeds.
+
+
+.new
+.option tls_verify_cert_hostnames smtp "host list&!!" *
+.cindex "TLS" "server certificate hostname verification"
+.cindex "certificate" "verification of server"
+This option give a list of hosts for which,
+while verifying the server certificate,
+checks will be included on the host name
+(note that this will generally be the result of a DNS MX lookup)
+versus Subject and Subject-Alternate-Name fields. Wildcard names are permitted
+limited to being the initial component of a 3-or-more component FQDN.
+
+There is no equivalent checking on client certificates.
+.wen
+
+
+.new
+.option tls_verify_certificates smtp string&!! system
.cindex "TLS" "server certificate verification"
.cindex "certificate" "verification of server"
.vindex "&$host$&"
.vindex "&$host_address$&"
-The value of this option must be the absolute path to a file containing
-permitted server certificates, for use when setting up an encrypted connection.
-Alternatively, if you are using OpenSSL, you can set
-&%tls_verify_certificates%& to the name of a directory containing certificate
-files. This does not work with GnuTLS; the option must be set to the name of a
-single file if you are using GnuTLS. The values of &$host$& and
+The value of this option must be either the
+word "system"
+or the absolute path to
+a file or directory containing permitted certificates for servers,
+for use when setting up an encrypted connection.
+
+The "system" value for the option will use a location compiled into the SSL library.
+This is not available for GnuTLS versions preceding 3.0.20; a value of "system"
+is taken as empty and an explicit location
+must be specified.
+
+The use of a directory for the option value is not avilable for GnuTLS versions
+preceding 3.3.6 and a single file must be used.
+.wen
+
+With OpenSSL the certificates specified
+explicitly
+either by file or directory
+are added to those given by the system default location.
+
+The values of &$host$& and
&$host_address$& are set to the name and address of the server during the
expansion of this option. See chapter &<<CHAPTLS>>& for details of TLS.
+For back-compatability,
+if neither tls_verify_hosts nor tls_try_verify_hosts are set
+(a single-colon empty list counts as being set)
+and certificate verification fails the TLS connection is closed.
+
+
+.option tls_verify_hosts smtp "host list&!!" unset
+.cindex "TLS" "server certificate verification"
+.cindex "certificate" "verification of server"
+This option gives a list of hosts for which. on encrypted connections,
+certificate verification must succeed.
+The &%tls_verify_certificates%& option must also be set.
+If both this option and &%tls_try_verify_hosts%& are unset
+operation is as if this option selected all hosts.
+
part.
.cindex "regular expressions" "in retry rules"
-&*Warning*&: If you use a regular expression in a routing rule pattern, it
+&*Warning*&: If you use a regular expression in a retry rule pattern, it
must match a complete address, not just a domain, because that is how regular
expressions work in address lists.
.display
.endd
+.option client_set_id authenticators string&!! unset
+When client authentication succeeds, this condition is expanded; the
+result is used in the log lines for outbound messasges.
+Typically it will be the user name used for authentication.
+
+
.option driver authenticators string unset
This option must always be set. It specifies which of the available
authenticators is to be used.
expansion is &"1"&, &"yes"&, or &"true"&, authentication succeeds and the
generic &%server_set_id%& option is expanded and saved in &$authenticated_id$&.
For any other result, a temporary error code is returned, with the expanded
-string as the error text.
+string as the error text
&*Warning*&: If you use a lookup in the expansion to find the user's
password, be sure to make the authentication fail if the user is unknown.
.scindex IIDdcotauth2 "authenticators" "&(dovecot)&"
This authenticator is an interface to the authentication facility of the
Dovecot POP/IMAP server, which can support a number of authentication methods.
+Note that Dovecot must be configured to use auth-client not auth-userdb.
If you are using Dovecot to authenticate POP/IMAP clients, it might be helpful
to use the same mechanisms for SMTP authentication. This is a server
authenticator only. There is only one option:
driver = dovecot
public_name = PLAIN
server_socket = /var/run/dovecot/auth-client
- server_set_id = $auth2
+ server_set_id = $auth1
dovecot_ntlm:
driver = dovecot
There are some differences in usage when using GnuTLS instead of OpenSSL:
.ilist
-The &%tls_verify_certificates%& option must contain the name of a file, not the
-name of a directory (for OpenSSL it can be either).
+The &%tls_verify_certificates%& option
+cannot be the path of a directory
+for GnuTLS versions before 3.3.6
+(for later versions, or OpenSSL, it can be either).
.next
The default value for &%tls_dhparam%& differs for historical reasons.
.next
The &%tls_require_ciphers%& options operate differently, as described in the
sections &<<SECTreqciphssl>>& and &<<SECTreqciphgnu>>&.
.next
-.new
The &%tls_dh_min_bits%& SMTP transport option is only honoured by GnuTLS.
When using OpenSSL, this option is ignored.
(If an API is found to let OpenSSL be configured in this way,
let the Exim Maintainers know and we'll likely use it).
-.wen
.next
Some other recently added features may only be available in one or the other.
This should be documented with the feature. If the documentation does not
as part of the &[gnutls_priority_init]& function. This is very similar to the
ciphersuite specification in OpenSSL.
-The &%tls_require_ciphers%& option is treated as the GnuTLS priority string.
+The &%tls_require_ciphers%& option is treated as the GnuTLS priority string
+and controls both protocols and ciphers.
The &%tls_require_ciphers%& option is available both as an global option,
controlling how Exim behaves as a server, and also as an option of the
Documentation of the strings accepted may be found in the GnuTLS manual, under
"Priority strings". This is online as
-&url(http://www.gnu.org/software/gnutls/manual/html_node/Priority-Strings.html),
+&url(http://www.gnutls.org/manual/html_node/Priority-Strings.html),
but beware that this relates to GnuTLS 3, which may be newer than the version
installed on your system. If you are using GnuTLS 3,
-&url(http://www.gnu.org/software/gnutls/manual/html_node/Listing-the-ciphersuites-in-a-priority-string.html, then the example code)
+&url(http://www.gnutls.org/manual/gnutls.html#Listing-the-ciphersuites-in-a-priority-string, then the example code)
on that site can be used to test a given string.
+For example:
+.code
+# Disable older versions of protocols
+tls_require_ciphers = NORMAL:%LATEST_RECORD_VERSION:-VERS-SSL3.0
+.endd
+
Prior to Exim 4.80, an older API of GnuTLS was used, and Exim supported three
additional options, "&%gnutls_require_kx%&", "&%gnutls_require_mac%&" and
"&%gnutls_require_protocols%&". &%tls_require_ciphers%& was an Exim list.
These options are, in fact, expanded strings, so you can make them depend on
the identity of the client that is connected if you wish. The first file
contains the server's X509 certificate, and the second contains the private key
-that goes with it. These files need to be readable by the Exim user, and must
-always be given as full path names. They can be the same file if both the
+that goes with it. These files need to be
+PEM format and readable by the Exim user, and must
+always be given as full path names.
+The key must not be password-protected.
+They can be the same file if both the
certificate and the key are contained within it. If &%tls_privatekey%& is not
set, or if its expansion is forced to fail or results in an empty string, this
is assumed to be the case. The certificate file may also contain intermediate
This may also be set to a string identifying a standard prime to be used for
DH; if it is set to &`default`& or, for OpenSSL, is unset, then the prime
used is &`ike23`&. There are a few standard primes available, see the
-documetnation for &%tls_dhparam%& for the complete list.
+documentation for &%tls_dhparam%& for the complete list.
See the command
.code
apply to all TLS connections. For any host that matches one of these options,
Exim requests a certificate as part of the setup of the TLS session. The
contents of the certificate are verified by comparing it with a list of
-expected certificates. These must be available in a file or,
-for OpenSSL only (not GnuTLS), a directory, identified by
+expected certificates.
+.new
+These may be the system default set (depending on library version),
+.wen
+an explicit file or,
+depending on library version, a directory, identified by
&%tls_verify_certificates%&.
A file can contain multiple certificates, concatenated end to end. If a
.cindex "TLS" "revoked certificates"
.cindex "revocation list"
.cindex "certificate" "revocation list"
+.cindex "OCSP" "stapling"
Certificate issuing authorities issue Certificate Revocation Lists (CRLs) when
certificates are revoked. If you have such a list, you can pass it to an Exim
server using the global option called &%tls_crl%& and to an Exim client using
an identically named option for the &(smtp)& transport. In each case, the value
of the option is expanded and must then be the name of a file that contains a
CRL in PEM format.
+The downside is that clients have to periodically re-download a potentially huge
+file from every certificate authority they know of.
+
+The way with most moving parts at query time is Online Certificate
+Status Protocol (OCSP), where the client verifies the certificate
+against an OCSP server run by the CA. This lets the CA track all
+usage of the certs. It requires running software with access to the
+private key of the CA, to sign the responses to the OCSP queries. OCSP
+is based on HTTP and can be proxied accordingly.
+
+The only widespread OCSP server implementation (known to this writer)
+comes as part of OpenSSL and aborts on an invalid request, such as
+connecting to the port and then disconnecting. This requires
+re-entering the passphrase each time some random client does this.
+
+The third way is OCSP Stapling; in this, the server using a certificate
+issued by the CA periodically requests an OCSP proof of validity from
+the OCSP server, then serves it up inline as part of the TLS
+negotiation. This approach adds no extra round trips, does not let the
+CA track users, scales well with number of certs issued by the CA and is
+resilient to temporary OCSP server failures, as long as the server
+starts retrying to fetch an OCSP proof some time before its current
+proof expires. The downside is that it requires server support.
+
+Unless Exim is built with the support disabled,
+or with GnuTLS earlier than version 3.1.3,
+support for OCSP stapling is included.
+
+There is a global option called &%tls_ocsp_file%&.
+The file specified therein is expected to be in DER format, and contain
+an OCSP proof. Exim will serve it as part of the TLS handshake. This
+option will be re-expanded for SNI, if the &%tls_certificate%& option
+contains &`tls_in_sni`&, as per other TLS options.
+
+Exim does not at this time implement any support for fetching a new OCSP
+proof. The burden is on the administrator to handle this, outside of
+Exim. The file specified should be replaced atomically, so that the
+contents are always valid. Exim will expand the &%tls_ocsp_file%& option
+on each connection, so a new file will be handled transparently on the
+next connection.
+
+When built with OpenSSL Exim will check for a valid next update timestamp
+in the OCSP proof; if not present, or if the proof has expired, it will be
+ignored.
+
+For the client to be able to verify the stapled OCSP the server must
+also supply, in its stapled information, any intermediate
+certificates for the chain leading to the OCSP proof from the signer
+of the server certificate. There may be zero or one such. These
+intermediate certificates should be added to the server OCSP stapling
+file named by &%tls_ocsp_file%&.
+
+Note that the proof only covers the terminal server certificate,
+not any of the chain from CA to it.
+
+There is no current way to staple a proof for a client certificate.
+
+.code
+ A helper script "ocsp_fetch.pl" for fetching a proof from a CA
+ OCSP server is supplied. The server URL may be included in the
+ server certificate, if the CA is helpful.
+
+ One failure mode seen was the OCSP Signer cert expiring before the end
+ of validity of the OCSP proof. The checking done by Exim/OpenSSL
+ noted this as invalid overall, but the re-fetch script did not.
+.endd
+
+
.section "Configuring an Exim client to use TLS" "SECID185"
&%tls_verify_hosts%& or &%tls_try_verify_hosts%& matches the client.
If the &%tls_verify_certificates%& option is set on the &(smtp)& transport, it
+specifies a collection of expected server certificates.
+.new
+These may be the system default set (depending on library version),
+.wen
+a file or,
+depnding on liibrary version, a directory,
must name a file or,
-for OpenSSL only (not GnuTLS), a directory, that contains a collection of
-expected server certificates. The client verifies the server's certificate
+for OpenSSL only (not GnuTLS), a directory.
+The client verifies the server's certificate
against this collection, taking into account any revoked certificates that are
in the list defined by &%tls_crl%&.
+Failure to verify fails the TLS connection unless either of the
+&%tls_verify_hosts%& or &%tls_try_verify_hosts%& options are set.
+
+The &%tls_verify_hosts%& and &%tls_try_verify_hosts%& options restrict
+certificate verification to the listed servers. Verification either must
+or need not succeed respectively.
+
+The &(smtp)& transport has two OCSP-related options:
+&%hosts_require_ocsp%&; a host-list for which a Certificate Status
+is requested and required for the connection to proceed. The default
+value is empty.
+&%hosts_request_ocsp%&; a host-list for which (additionally)
+a Certificate Status is requested (but not necessarily verified). The default
+value is "*" meaning that requests are made unless configured
+otherwise.
+
+The host(s) should also be in &%hosts_require_tls%&, and
+&%tls_verify_certificates%& configured for the transport,
+for OCSP to be relevant.
If
&%tls_require_ciphers%& is set on the &(smtp)& transport, it must contain a
.next
.vindex "&%tls_verify_certificates%&"
&%tls_verify_certificates%&
+.next
+.vindex "&%tls_ocsp_file%&"
+&%tls_ocsp_file%&
.endlist
Great care should be taken to deal with matters of case, various injection
root certificate along with the rest makes it available for the user to
install if the receiving end is a client MUA that can interact with a user.
+Note that certificates using MD5 are unlikely to work on today's Internet;
+even if your libraries allow loading them for use in Exim when acting as a
+server, increasingly clients will not accept such certificates. The error
+diagnostics in such a case can be frustratingly vague.
+
+
.section "Self-signed certificates" "SECID187"
.cindex "certificate" "self-signed"
You can create a self-signed certificate using the &'req'& command provided
with OpenSSL, like this:
+. ==== Do not shorten the duration here without reading and considering
+. ==== the text below. Please leave it at 9999 days.
.code
openssl req -x509 -newkey rsa:1024 -keyout file1 -out file2 \
-days 9999 -nodes
prompting for the passphrase. This is not helpful if you are going to use
this certificate and key in an MTA, where prompting is not possible.
+. ==== I expect to still be working 26 years from now. The less technical
+. ==== debt I create, in terms of storing up trouble for my later years, the
+. ==== happier I will be then. We really have reached the point where we
+. ==== should start, at the very least, provoking thought and making folks
+. ==== pause before proceeding, instead of leaving all the fixes until two
+. ==== years before 2^31 seconds after the 1970 Unix epoch.
+. ==== -pdp, 2012
+NB: we are now past the point where 9999 days takes us past the 32-bit Unix
+epoch. If your system uses unsigned time_t (most do) and is 32-bit, then
+the above command might produce a date in the past. Think carefully about
+the lifetime of the systems you're deploying, and either reduce the duration
+of the certificate or reconsider your platform deployment. (At time of
+writing, reducing the duration is the most likely choice, but the inexorable
+progression of time takes us steadily towards an era where this will not
+be a sensible resolution).
+
A self-signed certificate made in this way is sufficient for testing, and
may be adequate for all your requirements if you are mainly interested in
encrypting transfers, and not in secure identification.
.cindex "SMTP" "connection, ACL for"
.cindex "non-SMTP messages" "ACLs for"
.cindex "MIME content scanning" "ACL for"
+.cindex "PRDR" "ACL for"
.table2 140pt
.irow &%acl_not_smtp%& "ACL for non-SMTP messages"
.irow &%acl_smtp_auth%& "ACL for AUTH"
.irow &%acl_smtp_connect%& "ACL for start of SMTP connection"
.irow &%acl_smtp_data%& "ACL after DATA is complete"
+.irow &%acl_smtp_data_prdr%& "ACL for each recipient, after DATA is complete"
.irow &%acl_smtp_etrn%& "ACL for ETRN"
.irow &%acl_smtp_expn%& "ACL for EXPN"
.irow &%acl_smtp_helo%& "ACL for HELO or EHLO"
and try again later, but that is their problem, though it does waste some of
your resources.
+The &%acl_smtp_data%& ACL is run after
+the &%acl_smtp_data_prdr%&,
+the &%acl_smtp_dkim%&
+and the &%acl_smtp_mime%& ACLs.
.section "The SMTP DKIM ACL" "SECTDKIMACL"
The &%acl_smtp_dkim%& ACL is available only when Exim is compiled with DKIM support
received, and is executed for each DKIM signature found in a message. If not
otherwise specified, the default action is to accept.
-For details on the operation of DKIM, see chapter &<<CHID12>>&.
+This ACL is evaluated before &%acl_smtp_mime%& and &%acl_smtp_data%&.
+
+For details on the operation of DKIM, see chapter &<<CHAPdkim>>&.
.section "The SMTP MIME ACL" "SECID194"
The &%acl_smtp_mime%& option is available only when Exim is compiled with the
content-scanning extension. For details, see chapter &<<CHAPexiscan>>&.
+This ACL is evaluated after &%acl_smtp_dkim%& but before &%acl_smtp_data%&.
+
+
+.section "The SMTP PRDR ACL" "SECTPRDRACL"
+.cindex "PRDR" "ACL for"
+.oindex "&%prdr_enable%&"
+The &%acl_smtp_data_prdr%& ACL is available only when Exim is compiled
+with PRDR support enabled (which is the default).
+It becomes active only when the PRDR feature is negotiated between
+client and server for a message, and more than one recipient
+has been accepted.
+
+The ACL test specfied by &%acl_smtp_data_prdr%& happens after a message
+has been recieved, and is executed once for each recipient of the message
+with &$local_part$& and &$domain$& valid.
+The test may accept, defer or deny for inividual recipients.
+The &%acl_smtp_data%& will still be called after this ACL and
+can reject the message overall, even if this ACL has accepted it
+for some or all recipients.
+
+PRDR may be used to support per-user content filtering. Without it
+one must defer any recipient after the first that has a different
+content-filter configuration. With PRDR, the RCPT-time check
+for this can be disabled when the MAIL-time $smtp_command included
+"PRDR". Any required difference in behaviour of the main DATA-time
+ACL should however depend on the PRDR-time ACL having run, as Exim
+will avoid doing so in some situations (eg. single-recipient mails).
+
+See also the &%prdr_enable%& global option
+and the &%hosts_try_prdr%& smtp transport option.
+
+This ACL is evaluated after &%acl_smtp_dkim%& but before &%acl_smtp_data%&.
+If the ACL is not defined, processing completes as if
+the feature was not requested by the client.
.section "The QUIT ACL" "SECTQUITACL"
.cindex "QUIT, ACL for"
.section "The not-QUIT ACL" "SECTNOTQUITACL"
.vindex &$acl_smtp_notquit$&
The not-QUIT ACL, specified by &%acl_smtp_notquit%&, is run in most cases when
-an SMTP session ends without sending QUIT. However, when Exim itself is is bad
+an SMTP session ends without sending QUIT. However, when Exim itself is in bad
trouble, such as being unable to write to its log files, this ACL is not run,
because it might try to do things (such as write to log files) that make the
situation even worse.
If &%log_message%& is not present, a &%warn%& verb just checks its conditions
and obeys any &"immediate"& modifiers (such as &%control%&, &%set%&,
-&%logwrite%&, and &%add_header%&) that appear before the first failing
-condition. There is more about adding header lines in section
+&%logwrite%&, &%add_header%&, and &%remove_header%&) that appear before the
+first failing condition. There is more about adding header lines in section
&<<SECTaddheadacl>>&.
If any condition on a &%warn%& statement cannot be completed (that is, there is
warning is generated. The &%control%& modifier affects the way an incoming
message is handled.
-The positioning of the modifiers in an ACL statement important, because the
+The positioning of the modifiers in an ACL statement is important, because the
processing of a verb ceases as soon as its outcome is known. Only those
modifiers that have already been encountered will take effect. For example,
consider this use of the &%message%& modifier:
.vitem &*delay*&&~=&~<&'time'&>
.cindex "&%delay%& ACL modifier"
.oindex "&%-bh%&"
-This modifier may appear in any ACL. It causes Exim to wait for the time
-interval before proceeding. However, when testing Exim using the &%-bh%&
-option, the delay is not actually imposed (an appropriate message is output
-instead). The time is given in the usual Exim notation, and the delay happens
-as soon as the modifier is processed. In an SMTP session, pending output is
-flushed before the delay is imposed.
+This modifier may appear in any ACL except notquit. It causes Exim to wait for
+the time interval before proceeding. However, when testing Exim using the
+&%-bh%& option, the delay is not actually imposed (an appropriate message is
+output instead). The time is given in the usual Exim notation, and the delay
+happens as soon as the modifier is processed. In an SMTP session, pending
+output is flushed before the delay is imposed.
Like &%control%&, &%delay%& can be used with &%accept%& or &%deny%&, for
example:
response.
.vindex "&$acl_verify_message$&"
+For ACLs that are called by an &%acl =%& ACL condition, the message is
+stored in &$acl_verify_message$&, from which the calling ACL may use it.
+
If &%message%& is used on a statement that verifies an address, the message
specified overrides any message that is generated by the verification process.
However, the original message is available in the variable
effect.
+.vitem &*remove_header*&&~=&~<&'text'&>
+This modifier specifies one or more header names in a colon-separated list
+ that are to be removed from an incoming message, assuming, of course, that
+the message is ultimately accepted. For details, see section &<<SECTremoveheadacl>>&.
+
+
.vitem &*set*&&~<&'acl_name'&>&~=&~<&'value'&>
.cindex "&%set%& ACL modifier"
This modifier puts a value into one of the ACL variables (see section
&<<SECTaclvariables>>&).
-.endlist
+.vitem &*udpsend*&&~=&~<&'parameters'&>
+This modifier sends a UDP packet, for purposes such as statistics
+collection or behaviour monitoring. The parameters are expanded, and
+the result of the expansion must be a colon-separated list consisting
+of a destination server, port number, and the packet contents. The
+server can be specified as a host name or IPv4 or IPv6 address. The
+separator can be changed with the usual angle bracket syntax. For
+example, you might want to collect information on which hosts connect
+when:
+.code
+udpsend = <; 2001:dB8::dead:beef ; 1234 ;\
+ $tod_zulu $sender_host_address
+.endd
+.endlist
+
is what is wanted for subsequent tests.
-.new
.vitem &*control&~=&~cutthrough_delivery*&
.cindex "&ACL;" "cutthrough routing"
+.cindex "cutthrough" "requesting"
This option requests delivery be attempted while the item is being received.
-It is usable in the RCPT ACL and valid only for single-recipient mails forwarded
-from one SMTP connection to another. If a recipient-verify callout connection is
-requested in the same ACL it is held open and used for the data, otherwise one is made
-after the ACL completes.
+
+The option is usable in the RCPT ACL.
+If enabled for a message recieved via smtp and routed to an smtp transport,
+and only one transport, interface, destination host and port combination
+is used for all recipients of the message,
+then the delivery connection is made while the receiving connection is open
+and data is copied from one to the other.
+
+An attempt to set this option for any recipient but the first
+for a mail will be quietly ignored.
+If a recipient-verify callout connection is subsequently
+requested in the same ACL it is held open and used for
+any subsequent receipients and the data,
+otherwise one is made after the initial RCPT ACL completes.
+
+Note that routers are used in verify mode,
+and cannot depend on content of received headers.
+Note also that headers cannot be
+modified by any of the post-data ACLs (DATA, MIME and DKIM).
+Headers may be modified by routers (subject to the above) and transports.
+
+Cutthrough delivery is not supported via transport-filters or when DKIM signing
+of outgoing messages is done, because it sends data to the ultimate destination
+before the entire message has been received from the source.
+It is not supported for messages recieved with the SMTP PRDR option in use.
Should the ultimate destination system positively accept or reject the mail,
a corresponding indication is given to the source system and nothing is queued.
If there is a temporary error the item is queued for later delivery in the
-usual fashion. If the item is successfully delivered in cutthrough mode the log line
-is tagged with ">>" rather than "=>" and appears before the acceptance "<="
-line.
+usual fashion. If the item is successfully delivered in cutthrough mode
+the delivery log lines are tagged with ">>" rather than "=>" and appear
+before the acceptance "<=" line.
-Delivery in this mode avoids the generation of a bounce mail to a (possibly faked)
+Delivery in this mode avoids the generation of a bounce mail to a
+(possibly faked)
sender when the destination system is doing content-scan based rejection.
-.wen
-
-
-.new
-.vitem &*control&~=&~dscp/*&<&'value'&>
-.cindex "&ACL;" "setting DSCP value"
-.cindex "DSCP" "inbound"
-This option causes the DSCP value associated with the socket for the inbound
-connection to be adjusted to a given value, given as one of a number of fixed
-strings or to numeric value.
-The &%-bI:dscp%& option may be used to ask Exim which names it knows of.
-Common values include &`throughput`&, &`mincost`&, and on newer systems
-&`ef`&, &`af41`&, etc. Numeric values may be in the range 0 to 0x3F.
-
-The outbound packets from Exim will be marked with this value in the header
-(for IPv4, the TOS field; for IPv6, the TCLASS field); there is no guarantee
-that these values will have any effect, not be stripped by networking
-equipment, or do much of anything without cooperation with your Network
-Engineer and those of all network operators between the source and destination.
-.wen
.vitem &*control&~=&~debug/*&<&'options'&>
.endd
+.vitem &*control&~=&~dkim_disable_verify*&
+.cindex "disable DKIM verify"
+.cindex "DKIM" "disable verify"
+This control turns off DKIM verification processing entirely. For details on
+the operation and configuration of DKIM, see chapter &<<CHAPdkim>>&.
+
+
+.vitem &*control&~=&~dscp/*&<&'value'&>
+.cindex "&ACL;" "setting DSCP value"
+.cindex "DSCP" "inbound"
+This option causes the DSCP value associated with the socket for the inbound
+connection to be adjusted to a given value, given as one of a number of fixed
+strings or to numeric value.
+The &%-bI:dscp%& option may be used to ask Exim which names it knows of.
+Common values include &`throughput`&, &`mincost`&, and on newer systems
+&`ef`&, &`af41`&, etc. Numeric values may be in the range 0 to 0x3F.
+
+The outbound packets from Exim will be marked with this value in the header
+(for IPv4, the TOS field; for IPv6, the TCLASS field); there is no guarantee
+that these values will have any effect, not be stripped by networking
+equipment, or do much of anything without cooperation with your Network
+Engineer and those of all network operators between the source and destination.
+
+
.vitem &*control&~=&~enforce_sync*& &&&
&*control&~=&~no_enforce_sync*&
.cindex "SMTP" "synchronization checking"
.section "Adding header lines in ACLs" "SECTaddheadacl"
.cindex "header lines" "adding in an ACL"
.cindex "header lines" "position of added lines"
-.cindex "&%message%& ACL modifier"
+.cindex "&%add_header%& ACL modifier"
The &%add_header%& modifier can be used to add one or more extra header lines
to an incoming message, as in this example:
.code
add_header = X-blacklisted-at: $dnslist_domain
.endd
The &%add_header%& modifier is permitted in the MAIL, RCPT, PREDATA, DATA,
-MIME, and non-SMTP ACLs (in other words, those that are concerned with
+MIME, DKIM, and non-SMTP ACLs (in other words, those that are concerned with
receiving a message). The message must ultimately be accepted for
&%add_header%& to have any significant effect. You can use &%add_header%& with
any ACL verb, including &%deny%& (though this is potentially useful only in a
RCPT ACL).
-If the data for the &%add_header%& modifier contains one or more newlines that
+Headers will not be added to the message if the modifier is used in
+DATA, MIME or DKIM ACLs for messages delivered by cutthrough routing.
+
+Leading and trailing newlines are removed from
+the data for the &%add_header%& modifier; if it then
+contains one or more newlines that
are not followed by a space or a tab, it is assumed to contain multiple header
lines. Each one is checked for valid syntax; &`X-ACL-Warn:`& is added to the
front of any line that is not a valid header line.
are included in the entry that is written to the reject log.
.cindex "header lines" "added; visibility of"
-Header lines are not visible in string expansions until they are added to the
+Header lines are not visible in string expansions
+of message headers
+until they are added to the
message. It follows that header lines defined in the MAIL, RCPT, and predata
ACLs are not visible until the DATA ACL and MIME ACLs are run. Similarly,
header lines that are added by the DATA or MIME ACLs are not visible in those
this, you can use ACL variables, as described in section
&<<SECTaclvariables>>&.
-The &%add_header%& modifier acts immediately it is encountered during the
+The list of headers yet to be added is given by the &%$headers_added%& variable.
+
+The &%add_header%& modifier acts immediately as it is encountered during the
processing of an ACL. Notice the difference between these two cases:
.display
&`accept add_header = ADDED: some text`&
+.section "Removing header lines in ACLs" "SECTremoveheadacl"
+.cindex "header lines" "removing in an ACL"
+.cindex "header lines" "position of removed lines"
+.cindex "&%remove_header%& ACL modifier"
+The &%remove_header%& modifier can be used to remove one or more header lines
+from an incoming message, as in this example:
+.code
+warn message = Remove internal headers
+ remove_header = x-route-mail1 : x-route-mail2
+.endd
+The &%remove_header%& modifier is permitted in the MAIL, RCPT, PREDATA, DATA,
+MIME, DKIM, and non-SMTP ACLs (in other words, those that are concerned with
+receiving a message). The message must ultimately be accepted for
+&%remove_header%& to have any significant effect. You can use &%remove_header%&
+with any ACL verb, including &%deny%&, though this is really not useful for
+any verb that doesn't result in a delivered message.
+
+Headers will not be removed to the message if the modifier is used in
+DATA, MIME or DKIM ACLs for messages delivered by cutthrough routing.
+
+More than one header can be removed at the same time by using a colon separated
+list of header names. The header matching is case insensitive. Wildcards are
+not permitted, nor is list expansion performed, so you cannot use hostlists to
+create a list of headers, however both connection and message variable expansion
+are performed (&%$acl_c_*%& and &%$acl_m_*%&), illustrated in this example:
+.code
+warn hosts = +internal_hosts
+ set acl_c_ihdrs = x-route-mail1 : x-route-mail2
+warn message = Remove internal headers
+ remove_header = $acl_c_ihdrs
+.endd
+Removed header lines are accumulated during the MAIL, RCPT, and predata ACLs.
+They are removed from the message before processing the DATA and MIME ACLs.
+There is no harm in attempting to remove the same header twice nor is removing
+a non-existent header. Further header lines to be removed may be accumulated
+during the DATA and MIME ACLs, after which they are removed from the message,
+if present. In the case of non-SMTP messages, headers to be removed are
+accumulated during the non-SMTP ACLs, and are removed from the message after
+all the ACLs have run. If a message is rejected after DATA or by the non-SMTP
+ACL, there really is no effect because there is no logging of what headers
+would have been removed.
+
+.cindex "header lines" "removed; visibility of"
+Header lines are not visible in string expansions until the DATA phase when it
+is received. Any header lines removed in the MAIL, RCPT, and predata ACLs are
+not visible in the DATA ACL and MIME ACLs. Similarly, header lines that are
+removed by the DATA or MIME ACLs are still visible in those ACLs. Because of
+this restriction, you cannot use header lines as a way of controlling data
+passed between (for example) the MAIL and RCPT ACLs. If you want to do this,
+you should instead use ACL variables, as described in section
+&<<SECTaclvariables>>&.
+
+The &%remove_header%& modifier acts immediately as it is encountered during the
+processing of an ACL. Notice the difference between these two cases:
+.display
+&`accept remove_header = X-Internal`&
+&` `&<&'some condition'&>
+
+&`accept `&<&'some condition'&>
+&` remove_header = X-Internal`&
+.endd
+In the first case, the header line is always removed, whether or not the
+condition is true. In the second case, the header line is removed only if the
+condition is true. Multiple occurrences of &%remove_header%& may occur in the
+same ACL statement. All those that are encountered before a condition fails
+are honoured.
+
+&*Warning*&: This facility currently applies only to header lines that are
+present during ACL processing. It does NOT remove header lines that are added
+in a system filter or in a router or transport.
+
+
+
.section "ACL conditions" "SECTaclconditions"
.cindex "&ACL;" "conditions; list of"
-Some of conditions listed in this section are available only when Exim is
+Some of the conditions listed in this section are available only when Exim is
compiled with the content-scanning extension. They are included here briefly
for completeness. More detailed descriptions can be found in the discussion on
content scanning in chapter &<<CHAPexiscan>>&.
ceases, but processing of the ACL continues.
If the argument is a named ACL, up to nine space-separated optional values
-can be appended; they appear in $acl_arg1 to $acl_arg9, and $acl_narg is set
-to the count of values. The name and values are expanded separately.
+can be appended; they appear within the called ACL in $acl_arg1 to $acl_arg9,
+and $acl_narg is set to the count of values.
+Previous values of these variables are restored after the call returns.
+The name and values are expanded separately.
+Note that spaces in complex expansions which are used as arguments
+will act as argument separators.
If the nested &%acl%& returns &"drop"& and the outer condition denies access,
the connection is dropped. If it returns &"discard"&, the verb must be
.endd
-.vitem &*hosts&~=&~*&<&'&~host&~list'&>
+.vitem &*hosts&~=&~*&<&'host&~list'&>
.cindex "&%hosts%& ACL condition"
.cindex "host" "ACL checking"
.cindex "&ACL;" "testing the client host"
send email. Details of how this works are given in section
&<<SECTverifyCSA>>&.
+.vitem &*verify&~=&~header_names_ascii*&
+.cindex "&%verify%& ACL condition"
+.cindex "&ACL;" "verifying header names only ASCII"
+.cindex "header lines" "verifying header names only ASCII"
+.cindex "verifying" "header names only ASCII"
+This condition is relevant only in an ACL that is run after a message has been
+received, that is, in an ACL specified by &%acl_smtp_data%& or
+&%acl_not_smtp%&. It checks all header names (not the content) to make sure
+there are no non-ASCII characters, also excluding control characters. The
+allowable characters are decimal ASCII values 33 through 126.
+
+Exim itself will handle headers with non-ASCII characters, but it can cause
+problems for downstream applications, so this option will allow their
+detection and rejection in the DATA ACL's.
+
.vitem &*verify&~=&~header_sender/*&<&'options'&>
.cindex "&%verify%& ACL condition"
.cindex "&ACL;" "verifying sender in the header"
address, and in that case, the subsequent value of &$address_data$& is the
value for the child address.
-.vitem &*verify&~=&~reverse_host_lookup*&
+.vitem &*verify&~=&~reverse_host_lookup/*&<&'options'&>
.cindex "&%verify%& ACL condition"
.cindex "&ACL;" "verifying host reverse lookup"
.cindex "host" "verifying reverse lookup"
one of its aliases, does, when it is itself looked up in the DNS, yield the
original IP address.
+There is one possible option, &`defer_ok`&. If this is present and a
+DNS operation returns a temporary error, the verify condition succeeds.
+
If this condition is used for a locally generated message (that is, when there
is no client host involved), it always succeeds.
If the DNS lookup yields both 127.0.0.1 and 127.0.0.2, the condition is
false because 127.0.0.1 matches.
.next
-If &`!==`& or &`!=&&`& is used, the condition is true there is at least one
+If &`!==`& or &`!=&&`& is used, the condition is true if there is at least one
looked up IP address that does not match. Consider:
.code
dnslists = a.b.c!=&0.0.0.1
dnslists = some.list.example
.endd
+If an explicit key is being used for a DNS lookup and it may be an IPv6
+address you should specify alternate list separators for both the outer
+(DNS list name) list and inner (lookup keys) list:
+.code
+ dnslists = <; dnsbl.example.com/<|$acl_m_addrslist
+.endd
+
.section "Rate limiting incoming messages" "SECTratelimiting"
.cindex "rate limiting" "client sending"
.cindex "limiting client sending rates"
&%hosts%& setting, the transport's hosts are used. If an &(smtp)& transport has
&%hosts_override%& set, its hosts are always used, whether or not the router
supplies a host list.
+Callouts are only supported on &(smtp)& transports.
The port that is used is taken from the transport, if it is specified and is a
remote transport. (For routers that do verification only, no transport need be
LHLO is used instead of HELO if the transport's &%protocol%& option is
set to &"lmtp"&.
+The callout may use EHLO, AUTH and/or STARTTLS given appropriate option
+settings.
+
A recipient callout check is similar. By default, it also uses an empty address
for the sender. This default is chosen because most hosts do not make use of
the sender address when verifying a recipient. Using the same address means
specialized interfaces for &"daemon"& type virus scanners, which are resident
in memory and thus are much faster.
+.new
+A timeout of 2 minutes is applied to a scanner call (by default);
+if it expires then a defer action is taken.
+.wen
.oindex "&%av_scanner%&"
-You can set the &%av_scanner%& option in first part of the Exim configuration
-file to specify which scanner to use, together with any additional options that
+You can set the &%av_scanner%& option in the main part of the configuration
+to specify which scanner to use, together with any additional options that
are needed. The basic syntax is as follows:
.display
&`av_scanner = <`&&'scanner-type'&&`>:<`&&'option1'&&`>:<`&&'option2'&&`>:[...]`&
av_scanner = sophie:/var/run/sophie
.endd
If the value of &%av_scanner%& starts with a dollar character, it is expanded
-before use. The following scanner types are supported in this release:
+before use.
+The usual list-parsing of the content (see &<<SECTlistconstruct>>&) applies.
+The following scanner types are supported in this release:
.vlist
+.new
+.vitem &%avast%&
+.cindex "virus scanners" "avast"
+This is the scanner daemon of Avast. It has been tested with Avast Core
+Security (currenty at version 1.1.7).
+You can get a trial version at &url(http://www.avast.com) or for Linux
+at &url(http://www.avast.com/linux-server-antivirus).
+This scanner type takes one option,
+which can be either a full path to a UNIX socket,
+or host and port specifiers separated by white space.
+The host may be a name or an IP address; the port is either a
+single number or a pair of numbers with a dash between.
+Any further options are given, on separate lines,
+to the daemon as options before the main scan command.
+For example:
+.code
+av_scanner = avast:/var/run/avast/scan.sock:FLAGS -fullfiles:SENSITIVITY -pup
+av_scanner = avast:192.168.2.22 5036
+.endd
+If you omit the argument, the default path
+&_/var/run/avast/scan.sock_&
+is used.
+If you use a remote host,
+you need to make Exim's spool directory available to it,
+as the scanner is passed a file path, not file contents.
+For information about available commands and their options you may use
+.code
+$ socat UNIX:/var/run/avast/scan.sock STDIO:
+ FLAGS
+ SENSITIVITY
+ PACK
+.endd
+.wen
+
+
.vitem &%aveserver%&
.cindex "virus scanners" "Kaspersky"
This is the scanner daemon of Kaspersky Version 5. You can get a trial version
av_scanner = clamd:/opt/clamd/socket
av_scanner = clamd:192.0.2.3 1234
av_scanner = clamd:192.0.2.3 1234:local
+av_scanner = clamd:192.0.2.3 1234 : 192.0.2.4 1234
.endd
If the value of av_scanner points to a UNIX socket file or contains the local
keyword, then the ClamAV interface will pass a filename containing the data
Exim does not assume that there is a common filesystem with the remote host.
There is an option WITH_OLD_CLAMAV_STREAM in &_src/EDITME_& available, should
you be running a version of ClamAV prior to 0.95.
+
+The final example shows that multiple TCP targets can be specified. Exim will
+randomly use one for each incoming email (i.e. it load balances them). Note
+that only TCP targets may be used if specifying a list of scanners; a UNIX
+socket cannot be mixed in with TCP targets. If one of the servers becomes
+unavailable, Exim will try the remaining one(s) until it finds one that works.
+When a clamd server becomes unreachable, Exim will log a message. Exim does
+not keep track of scanner state between multiple messages, and the scanner
+selection is random, so the message will get logged in the mainlog for each
+email that the down scanner gets chosen first (message wrapped to be readable):
+.code
+2013-10-09 14:30:39 1VTumd-0000Y8-BQ malware acl condition:
+ clamd: connection to localhost, port 3310 failed
+ (Connection refused)
+.endd
+
If the option is unset, the default is &_/tmp/clamd_&. Thanks to David Saez for
contributing the code for this scanner.
.endd
.vitem &%drweb%&
.cindex "virus scanners" "DrWeb"
-The DrWeb daemon scanner (&url(http://www.sald.com/)) interface takes one
-argument, either a full path to a UNIX socket, or an IP address and port
-separated by white space, as in these examples:
+The DrWeb daemon scanner (&url(http://www.sald.com/)) interface
+takes one option,
+either a full path to a UNIX socket,
+or host and port specifiers separated by white space.
+The host may be a name or an IP address; the port is either a
+single number or a pair of numbers with a dash between.
+For example:
.code
av_scanner = drweb:/var/run/drwebd.sock
av_scanner = drweb:192.168.2.20 31337
If you omit the argument, the default path &_/usr/local/drweb/run/drwebd.sock_&
is used. Thanks to Alex Miller for contributing the code for this scanner.
+.vitem &%f-protd%&
+.cindex "virus scanners" "f-protd"
+The f-protd scanner is accessed via HTTP over TCP.
+One argument is taken, being a space-separated hostname and port number
+(or port-range).
+For example:
+.code
+av_scanner = f-protd:localhost 10200-10204
+.endd
+If you omit the argument, the default values show above are used.
+
.vitem &%fsecure%&
.cindex "virus scanners" "F-Secure"
The F-Secure daemon scanner (&url(http://www.f-secure.com)) takes one
.endd
You can safely omit this option (the default value is 1).
+.vitem &%sock%&
+.cindex "virus scanners" "simple socket-connected"
+This is a general-purpose way of talking to simple scanner daemons
+running on the local machine.
+There are four options:
+an address (which may be an IP addres and port, or the path of a Unix socket),
+a commandline to send (may include a single %s which will be replaced with
+the path to the mail file to be scanned),
+an RE to trigger on from the returned data,
+an RE to extract malware_name from the returned data.
+For example:
+.code
+av_scanner = sock:127.0.0.1 6001:%s:(SPAM|VIRUS):(.*)\$
+.endd
+Default for the socket specifier is &_/tmp/malware.sock_&.
+Default for the commandline is &_%s\n_&.
+Both regular-expressions are required.
+
.vitem &%sophie%&
.cindex "virus scanners" "Sophos and Sophie"
Sophie is a daemon that uses Sophos' &%libsavi%& library to scan for viruses.
message.
The &%malware%& condition takes a right-hand argument that is expanded before
-use. It can then be one of
+.new
+use and taken as a list, slash-separated by default.
+.wen
+The first element can then be one of
.ilist
&"true"&, &"*"&, or &"1"&, in which case the message is scanned for viruses.
A regular expression, in which case the message is scanned for viruses. The
condition succeeds if a virus is found and its name matches the regular
expression. This allows you to take special actions on certain types of virus.
+.new
+Note that &"/"& characters in the RE must be doubled due to the list-processing,
+unless the separator is changed (in the usual way).
+.wen
.endlist
-You can append &`/defer_ok`& to the &%malware%& condition to accept messages
-even if there is a problem with the virus scanner. Otherwise, such a problem
-causes the ACL to defer.
+You can append a &`defer_ok`& element to the &%malware%& argument list to accept
+messages even if there is a problem with the virus scanner.
+Otherwise, such a problem causes the ACL to defer.
+
+.new
+You can append a &`tmo=<val>`& element to the &%malware%& argument list to
+specify a non-default timeout. The default is two minutes.
+For example:
+.code
+malware = * / defer_ok / tmo=10s
+.endd
+A timeout causes the ACL to defer.
+.wen
.vindex "&$malware_name$&"
When a virus is found, the condition sets up an expansion variable called
.endd
-.section "Scanning with SpamAssassin" "SECTscanspamass"
+.section "Scanning with SpamAssassin and Rspamd" "SECTscanspamass"
.cindex "content scanning" "for spam"
.cindex "spam scanning"
.cindex "SpamAssassin"
+.cindex "Rspamd"
The &%spam%& ACL condition calls SpamAssassin's &%spamd%& daemon to get a spam
-score and a report for the message. You can get SpamAssassin at
-&url(http://www.spamassassin.org), or, if you have a working Perl
-installation, you can use CPAN by running:
+score and a report for the message.
+.new
+Support is also provided for Rspamd (which can speak SpamAssassin's protocol but
+provides reduced functionality when used in this mode).
+
+For more information about installation and configuration of SpamAssassin or
+Rspamd refer to their respective websites at
+&url(http://spamassassin.apache.org) and &url(http://www.rspamd.com)
+.wen
+
+SpamAssassin can be installed with CPAN by running:
.code
perl -MCPAN -e 'install Mail::SpamAssassin'
.endd
nicely, however.
.oindex "&%spamd_address%&"
-After having installed and configured SpamAssassin, start the &%spamd%& daemon.
-By default, it listens on 127.0.0.1, TCP port 783. If you use another host or
-port for &%spamd%&, you must set the &%spamd_address%& option in the global
-part of the Exim configuration as follows (example):
+By default, SpamAssassin listens on 127.0.0.1, TCP port 783 and if you
+intend to use an instance running on the local host you do not need to set
+&%spamd_address%&. If you intend to use another host or port for SpamAssassin,
+you must set the &%spamd_address%& option in the global part of the Exim
+configuration as follows (example):
.code
spamd_address = 192.168.99.45 387
.endd
-You do not need to set this option if you use the default. As of version 2.60,
-&%spamd%& also supports communication over UNIX sockets. If you want to use
-these, supply &%spamd_address%& with an absolute file name instead of a
-address/port pair:
+
+.new
+To use Rspamd (which by default listens on all local addresses
+on TCP port 11333)
+you should add &%variant=rspamd%& after the address/port pair, for example:
+.code
+spamd_address = 127.0.0.1 11333 variant=rspamd
+.endd
+.wen
+
+As of version 2.60, &%SpamAssassin%& also supports communication over UNIX
+sockets. If you want to us these, supply &%spamd_address%& with an absolute
+file name instead of an address/port pair:
.code
spamd_address = /var/run/spamd_socket
.endd
You can have multiple &%spamd%& servers to improve scalability. These can
reside on other hardware reachable over the network. To specify multiple
&%spamd%& servers, put multiple address/port pairs in the &%spamd_address%&
-option, separated with colons:
+option, separated with colons (the separator can be changed in the usual way):
.code
spamd_address = 192.168.2.10 783 : \
192.168.2.11 783 : \
192.168.2.12 783
.endd
-Up to 32 &%spamd%& servers are supported. The servers are queried in a random
-fashion. When a server fails to respond to the connection attempt, all other
+Up to 32 &%spamd%& servers are supported.
+When a server fails to respond to the connection attempt, all other
servers are tried until one succeeds. If no server responds, the &%spam%&
condition defers.
-&*Warning*&: It is not possible to use the UNIX socket connection method with
-multiple &%spamd%& servers.
+.new
+Unix and TCP socket specifications may be mixed in any order.
+Each element of the list is a list itself, space-separated by default
+and changeable in the usual way.
+
+For TCP socket specifications a host name or IP (v4 or v6, but
+subject to list-separator quoting rules) address can be used,
+and the port can be one or a dash-separated pair.
+In the latter case, the range is tried in strict order.
+
+Elements after the first for Unix sockets, or second for TCP socket,
+are options.
+The supported option are:
+.code
+variant=rspamd Use Rspamd rather than SpamAssassin protocol
+time=<start>-<end> Use only between these times of day
+tmo=<timespec> Connection time limit.
+weight=<value> Selection bias
+backup Use only if all non-backup servers fail
+.endd
+
+Time specifications for the &`time`& option are <hour>.<minute>.<second>
+in the local time zone; each element being one or more digits.
+Either the seconds or both minutes and seconds, plus the leading &`.`&
+characters, may be omitted and will be taken as zero.
+
+Timeout specifications for the &`tmo`& option are the usual Exim
+time interval standard, eg. &`20s`& or &`1m`&.
+The default value is two minutes.
+
+Servers are queried in a random fashion, weighted by the selection bias.
+The default value for selection bias is 1.
+.wen
The &%spamd_address%& variable is expanded before use if it starts with
a dollar sign. In this case, the expansion may return a string that is
relevant if you have set up multiple SpamAssassin profiles. If you do not want
to scan using a specific profile, but rather use the SpamAssassin system-wide
default profile, you can scan for an unknown name, or simply use &"nobody"&.
-However, you must put something on the right-hand side.
+.new
+Rspamd does not use this setting. However, you must put something on the
+right-hand side.
+.wen
The name allows you to use per-domain or per-user antispam profiles in
principle, but this is not straightforward in practice, because a message may
.vitem &$spam_report$&
A multiline text table, containing the full SpamAssassin report for the
message. Useful for inclusion in headers or reject messages.
+
+.new
+.vitem &$spam_action$&
+For SpamAssassin either 'reject' or 'no action' depending on the
+spam score versus threshold.
+For Rspamd, the recommended action.
+.wen
+
.endlist
The &%spam%& condition caches its results unless expansion in
the transport cannot refer to the modified header lines, because such
expansions all occur before the message is actually transported.
-For both routers and transports, the result of expanding a &%headers_add%&
+For both routers and transports, the argument of a &%headers_add%&
option must be in the form of one or more RFC 2822 header lines, separated by
newlines (coded as &"\n"&). For example:
.code
Exim does not check the syntax of these added header lines.
Multiple &%headers_add%& options for a single router or transport can be
-specified; the values will be concatenated (with a separating newline
-added) before expansion.
+specified; the values will append to a single list of header lines.
+Each header-line is separately expanded.
-The result of expanding &%headers_remove%& must consist of a colon-separated
+The argument of a &%headers_remove%& option must consist of a colon-separated
list of header names. This is confusing, because header names themselves are
often terminated by colons. In this case, the colons are the list separators,
not part of the names. For example:
.endd
Multiple &%headers_remove%& options for a single router or transport can be
-specified; the values will be concatenated (with a separating colon
-added) before expansion.
-
-When &%headers_add%& or &%headers_remove%& is specified on a router, its value
-is expanded at routing time, and then associated with all addresses that are
+specified; the arguments will append to a single header-names list.
+Each item is separately expanded.
+Note that colons in complex expansions which are used to
+form all or part of a &%headers_remove%& list
+will act as list separators.
+
+When &%headers_add%& or &%headers_remove%& is specified on a router,
+items are expanded at routing time,
+and then associated with all addresses that are
accepted by that router, and also with any new addresses that it generates. If
an address passes through several routers as a result of aliasing or
forwarding, the changes are cumulative.
The third item is used to introduce any text from pipe transports that is to be
returned to the sender. It is omitted if there is no such text.
.next
-The fourth item is used to introduce the copy of the message that is returned
-as part of the error report.
-.next
-The fifth item is added after the fourth one if the returned message is
-truncated because it is bigger than &%return_size_limit%&.
-.next
-The sixth item is added after the copy of the original message.
+.new
+The fourth, fifth and sixth items will be ignored and may be empty.
+The fields exist for back-compatibility
+.wen
.endlist
The default state (&%bounce_message_file%& unset) is equivalent to the
&`<=`& message arrival
&`=>`& normal message delivery
&`->`& additional address in same delivery
+&`>>`& cutthrough message delivery
&`*>`& delivery suppressed by &%-N%&
&`**`& delivery failed; address bounced
&`==`& delivery deferred; temporary problem
last of these is given in parentheses after the final address. The R and T
fields record the router and transport that were used to process the address.
+If SMTP AUTH was used for the delivery there is an additional item A=
+followed by the name of the authenticator that was used.
+If an authenticated identification was set up by the authenticator's &%client_set_id%&
+option, this is logged too, separated by a colon from the authenticator name.
+
If a shadow transport was run after a successful local delivery, the log line
for the successful delivery has an item added on the end, of the form
.display
down a single SMTP connection, an asterisk follows the IP address in the log
lines for the second and subsequent messages.
+.cindex "delivery" "cutthrough; logging"
+.cindex "cutthrough" "logging"
+When delivery is done in cutthrough mode it is flagged with &`>>`& and the log
+line precedes the reception line, since cutthrough waits for a possible
+rejection from the destination in case it can reject the sourced item.
+
The generation of a reply message by a filter file gets logged as a
&"delivery"& to the addressee, preceded by &">"&.
A summary of the field identifiers that are used in log lines is shown in
the following table:
.display
-&`A `& authenticator name (and optional id)
+&`A `& authenticator name (and optional id and sender)
&`C `& SMTP confirmation on delivery
&` `& command list for &"no mail in SMTP session"&
&`CV `& certificate verification status
&`R `& on &`<=`& lines: reference for local bounce
&` `& on &`=>`& &`**`& and &`==`& lines: router name
&`S `& size of message
+&`SNI `& server name indication from TLS client hello
&`ST `& shadow transport name
&`T `& on &`<=`& lines: message subject (topic)
&` `& on &`=>`& &`**`& and &`==`& lines: transport name
The list of optional log items is in the following table, with the default
selection marked by asterisks:
.display
+&` 8bitmime `& received 8BITMIME status
&`*acl_warn_skipped `& skipped &%warn%& statement in ACL
&` address_rewrite `& address rewriting
&` all_parents `& all parents in => lines
&`*etrn `& ETRN commands
&`*host_lookup_failed `& as it says
&` ident_timeout `& timeout for ident connection
-&` incoming_interface `& incoming interface on <= lines
-&` incoming_port `& incoming port on <= lines
+&` incoming_interface `& local interface on <= and => lines
+&` incoming_port `& remote port on <= lines
&`*lost_incoming_connection `& as it says (includes timeouts)
&` outgoing_port `& add remote port to => lines
&`*queue_run `& start and end queue runs
&`*smtp_confirmation `& SMTP confirmation on => lines
&` smtp_connection `& SMTP connections
&` smtp_incomplete_transaction`& incomplete SMTP transactions
+&` smtp_mailauth `& AUTH argument to MAIL commands
&` smtp_no_mail `& session with no MAIL commands
&` smtp_protocol_error `& SMTP protocol errors
&` smtp_syntax_error `& SMTP syntax errors
&` subject `& contents of &'Subject:'& on <= lines
-&` tls_certificate_verified `& certificate verification status
+.new
+&`*tls_certificate_verified `& certificate verification status
+.wen
&`*tls_cipher `& TLS cipher suite on <= and => lines
&` tls_peerdn `& TLS peer DN on <= and => lines
&` tls_sni `& TLS SNI on <= lines
More details on each of these items follows:
.ilist
+.cindex "8BITMIME"
+.cindex "log" "8BITMIME"
+&%8bitmime%&: This causes Exim to log any 8BITMIME status of received messages,
+which may help in tracking down interoperability issues with ancient MTAs
+that are not 8bit clean. This is added to the &"<="& line, tagged with
+&`M8S=`& and a value of &`0`&, &`7`& or &`8`&, corresponding to "not given",
+&`7BIT`& and &`8BITMIME`& respectively.
+.next
.cindex "&%warn%& ACL verb" "log when skipping"
&%acl_warn_skipped%&: When an ACL &%warn%& statement is skipped because one of
its conditions cannot be evaluated, a log line to this effect is written if
client's ident port times out.
.next
.cindex "log" "incoming interface"
+.cindex "log" "local interface"
+.cindex "log" "local address and port"
+.cindex "TCP/IP" "logging local address and port"
.cindex "interface" "logging"
&%incoming_interface%&: The interface on which a message was received is added
to the &"<="& line as an IP address in square brackets, tagged by I= and
followed by a colon and the port number. The local interface and port are also
-added to other SMTP log lines, for example &"SMTP connection from"&, and to
-rejection lines.
+added to other SMTP log lines, for example &"SMTP connection from"& and to
+rejection lines
+and (despite the name) the local interface is added to &"=>"& lines..
.next
.cindex "log" "incoming remote port"
.cindex "port" "logging remote"
.next
.cindex "log" "smtp confirmation"
.cindex "SMTP" "logging confirmation"
-&%smtp_confirmation%&: The response to the final &"."& in the SMTP dialogue for
+.cindex "LMTP" "logging confirmation"
+&%smtp_confirmation%&: The response to the final &"."& in the SMTP or LMTP dialogue for
outgoing messages is added to delivery log lines in the form &`C=`&<&'text'&>.
A number of MTAs (including Exim) return an identifying string in this
response.
setting of 10 for &%smtp_accep_max_nonmail%&, the connection will in any case
have been aborted before 20 non-mail commands are processed.
.next
+&%smtp_mailauth%&: A third subfield with the authenticated sender,
+colon-separated, is appended to the A= item for a message arrival or delivery
+log line, if an AUTH argument to the SMTP MAIL command (see &<<SECTauthparamail>>&)
+was accepted or used.
+.next
.cindex "log" "SMTP protocol error"
.cindex "SMTP" "logging protocol error"
&%smtp_protocol_error%&: A log line is written for every SMTP protocol error
.code
exim -bpu
.endd
-to obtain a queue listing with undelivered recipients only, and then greps the
-output to select messages that match given criteria. The following selection
-options are available:
+or (in case &*-a*& switch is specified)
+.code
+exim -bp
+.endd
+The &*-C*& option is used to specify an alternate &_exim.conf_& which might
+contain alternate exim configuration the queue management might be using.
+
+to obtain a queue listing, and then greps the output to select messages
+that match given criteria. The following selection options are available:
.vlist
.vitem &*-f*&&~<&'regex'&>
-Match the sender address. The field that is tested is enclosed in angle
-brackets, so you can test for bounce messages with
+Match the sender address using a case-insensitive search. The field that is
+tested is enclosed in angle brackets, so you can test for bounce messages with
.code
exiqgrep -f '^<>$'
.endd
.vitem &*-r*&&~<&'regex'&>
-Match a recipient address. The field that is tested is not enclosed in angle
-brackets.
+Match a recipient address using a case-insensitve search. The field that is
+tested is not enclosed in angle brackets.
.vitem &*-s*&&~<&'regex'&>
Match against the size field.
.vitem &*-R*&
Display messages in reverse order.
+
+.vitem &*-a*&
+Include delivered recipients in queue listing.
.endlist
There is one more option, &%-h%&, which outputs a list of options.
If a matching log line is not associated with a specific message, it is
included in &'exigrep'&'s output without any additional lines. The usage is:
.display
-&`exigrep [-t<`&&'n'&&`>] [-I] [-l] [-v] <`&&'pattern'&&`> [<`&&'log file'&&`>] ...`&
+&`exigrep [-t<`&&'n'&&`>] [-I] [-l] [-M] [-v] <`&&'pattern'&&`> [<`&&'log file'&&`>] ...`&
.endd
If no log file names are given on the command line, the standard input is read.
The &%-v%& option inverts the matching condition. That is, a line is selected
if it does &'not'& match the pattern.
+The &%-M%& options means &"related messages"&. &'exigrep'& will show messages
+that are generated as a result/response to a message that &'exigrep'& matched
+normally.
+
+Example of &%-M%&:
+user_a sends a message to user_b, which generates a bounce back to user_b. If
+&'exigrep'& is used to search for &"user_a"&, only the first message will be
+displayed. But if &'exigrep'& is used to search for &"user_b"&, the first and
+the second (bounce) message will be displayed. Using &%-M%& with &'exigrep'&
+when searching for &"user_a"& will show both messages since the bounce is
+&"related"& to or a &"result"& of the first message that was found by the
+search term.
+
If the location of a &'zcat'& command is known from the definition of
ZCAT_COMMAND in &_Local/Makefile_&, &'exigrep'& automatically passes any file
whose name ends in COMPRESS_SUFFIX through &'zcat'& as it searches it.
+.section "Running local commands" "SECTsecconslocalcmds"
+.cindex "security" "local commands"
+.cindex "security" "command injection attacks"
+There are a number of ways in which an administrator can configure Exim to run
+commands based upon received, untrustworthy, data. Further, in some
+configurations a user who can control a &_.forward_& file can also arrange to
+run commands. Configuration to check includes, but is not limited to:
+
+.ilist
+Use of &%use_shell%& in the pipe transport: various forms of shell command
+injection may be possible with this option present. It is dangerous and should
+be used only with considerable caution. Consider constraints which whitelist
+allowed characters in a variable which is to be used in a pipe transport that
+has &%use_shell%& enabled.
+.next
+A number of options such as &%forbid_filter_run%&, &%forbid_filter_perl%&,
+&%forbid_filter_dlfunc%& and so forth which restrict facilities available to
+&_.forward_& files in a redirect router. If Exim is running on a central mail
+hub to which ordinary users do not have shell access, but home directories are
+NFS mounted (for instance) then administrators should review the list of these
+forbid options available, and should bear in mind that the options that may
+need forbidding can change as new features are added between releases.
+.next
+The &%${run...}%& expansion item does not use a shell by default, but
+administrators can configure use of &_/bin/sh_& as part of the command.
+Such invocations should be viewed with prejudicial suspicion.
+.next
+Administrators who use embedded Perl are advised to explore how Perl's
+taint checking might apply to their usage.
+.next
+Use of &%${expand...}%& is somewhat analagous to shell's eval builtin and
+administrators are well advised to view its use with suspicion, in case (for
+instance) it allows a local-part to contain embedded Exim directives.
+.next
+Use of &%${match_local_part...}%& and friends becomes more dangerous if
+Exim was built with EXPAND_LISTMATCH_RHS defined: the second string in
+each can reference arbitrary lists and files, rather than just being a list
+of opaque strings.
+The EXPAND_LISTMATCH_RHS option was added and set false by default because of
+real-world security vulnerabilities caused by its use with untrustworthy data
+injected in, for SQL injection attacks.
+Consider the use of the &%inlisti%& expansion condition instead.
+.endlist
+
+
+
+
+.section "Trust in configuration data" "SECTsecconfdata"
+.cindex "security" "data sources"
+.cindex "security" "regular expressions"
+.cindex "regular expressions" "security"
+.cindex "PCRE" "security"
+If configuration data for Exim can come from untrustworthy sources, there
+are some issues to be aware of:
+
+.ilist
+Use of &%${expand...}%& may provide a path for shell injection attacks.
+.next
+Letting untrusted data provide a regular expression is unwise.
+.next
+Using &%${match...}%& to apply a fixed regular expression against untrusted
+data may result in pathological behaviour within PCRE. Be aware of what
+"backtracking" means and consider options for being more strict with a regular
+expression. Avenues to explore include limiting what can match (avoiding &`.`&
+when &`[a-z0-9]`& or other character class will do), use of atomic grouping and
+possessive quantifiers or just not using regular expressions against untrusted
+data.
+.next
+It can be important to correctly use &%${quote:...}%&,
+&%${quote_local_part:...}%& and &%${quote_%&<&'lookup-type'&>&%:...}%& expansion
+items to ensure that data is correctly constructed.
+.next
+Some lookups might return multiple results, even though normal usage is only
+expected to yield one result.
+.endlist
+
+
+
+
.section "IPv4 source routing" "SECID272"
.cindex "source routing" "in IP packets"
.cindex "IP source routing"
. ////////////////////////////////////////////////////////////////////////////
. ////////////////////////////////////////////////////////////////////////////
-.chapter "Support for DKIM (DomainKeys Identified Mail)" "CHID12" &&&
+.chapter "Support for DKIM (DomainKeys Identified Mail)" "CHAPdkim" &&&
"DKIM Support"
.cindex "DKIM"
Exim's DKIM implementation allows to
.olist
Sign outgoing messages: This function is implemented in the SMTP transport.
-It can co-exist with all other Exim features, including transport filters.
+It can co-exist with all other Exim features
+(including transport filters)
+except cutthrough delivery.
.next
Verify signatures in incoming messages: This is implemented by an additional
ACL (acl_smtp_dkim), which can be called several times per message, with
Verification of DKIM signatures in incoming email is implemented via the
&%acl_smtp_dkim%& ACL. By default, this ACL is called once for each
syntactically(!) correct signature in the incoming message.
+A missing ACL definition defaults to accept.
+If any ACL call does not acccept, the message is not accepted.
+If a cutthrough delivery was in progress for the message it is
+summarily dropped (having wasted the transmission effort).
To evaluate the signature in the ACL a large number of expansion variables
containing the signature status and its details are set up during the
A colon-separated list of names of headers included in the signature.
.vitem &%$dkim_key_testing%&
"1" if the key record has the "testing" flag set, "0" if not.
-.vitem &%$nosubdomains%&
+.vitem &%$dkim_key_nosubdomains%&
"1" if the key record forbids subdomaining, "0" otherwise.
.vitem &%$dkim_key_srvtype%&
Service type (tag s=) from the key record. Defaults to "*" if not specified
.vitem &%dkim_status%&
ACL condition that checks a colon-separated list of possible DKIM verification
-results agains the actual result of verification. This is typically used
+results against the actual result of verification. This is typically used
to restrict an ACL verb to a list of verification outcomes, for example:
.code
Edit &_src/drtables.c_&, adding conditional code to pull in the private header
and create a table entry as is done for all the other drivers and lookup types.
.next
+Edit &_scripts/lookups-Makefile_& if this is a new lookup; there is a for-loop
+near the bottom, ranging the &`name_mod`& variable over a list of all lookups.
+Add your &`NEWDRIVER`& to that list.
+As long as the dynamic module would be named &_newdriver.so_&, you can use the
+simple form that most lookups have.
+.next
Edit &_Makefile_& in the appropriate sub-directory (&_src/routers_&,
&_src/transports_&, &_src/auths_&, or &_src/lookups_&); add a line for the new
driver or lookup type and add it to the definition of OBJ.
git://git.exim.org / exim.git / blobdiff