* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2016 */
+/* Copyright (c) The Exim Maintainers 2020 - 2022 */
+/* Copyright (c) University of Cambridge 1995 - 2018 */
/* See the file NOTICE for conditions of use and distribution. */
+/* SPDX-License-Identifier: GPL-2.0-or-later */
#include "../exim.h"
#include "smtp.h"
-#define PENDING 256
-#define PENDING_DEFER (PENDING + DEFER)
-#define PENDING_OK (PENDING + OK)
+#if defined(SUPPORT_DANE) && defined(DISABLE_TLS)
+# error TLS is required for DANE
+#endif
/* Options specific to the smtp transport. This transport also supports LMTP
before the lower case letters). Some live in the transport_instance block so as
to be publicly visible; these are flagged with opt_public. */
+#define LOFF(field) OPT_OFF(smtp_transport_options_block, field)
+
optionlist smtp_transport_options[] = {
{ "*expand_multi_domain", opt_stringptr | opt_hidden | opt_public,
- (void *)offsetof(transport_instance, expand_multi_domain) },
+ OPT_OFF(transport_instance, expand_multi_domain) },
{ "*expand_retry_include_ip_address", opt_stringptr | opt_hidden,
- (void *)(offsetof(smtp_transport_options_block, expand_retry_include_ip_address)) },
+ LOFF(expand_retry_include_ip_address) },
{ "address_retry_include_sender", opt_bool,
- (void *)offsetof(smtp_transport_options_block, address_retry_include_sender) },
- { "allow_localhost", opt_bool,
- (void *)offsetof(smtp_transport_options_block, allow_localhost) },
- { "authenticated_sender", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, authenticated_sender) },
- { "authenticated_sender_force", opt_bool,
- (void *)offsetof(smtp_transport_options_block, authenticated_sender_force) },
- { "command_timeout", opt_time,
- (void *)offsetof(smtp_transport_options_block, command_timeout) },
- { "connect_timeout", opt_time,
- (void *)offsetof(smtp_transport_options_block, connect_timeout) },
+ LOFF(address_retry_include_sender) },
+ { "allow_localhost", opt_bool, LOFF(allow_localhost) },
+#ifdef EXPERIMENTAL_ARC
+ { "arc_sign", opt_stringptr, LOFF(arc_sign) },
+#endif
+ { "authenticated_sender", opt_stringptr, LOFF(authenticated_sender) },
+ { "authenticated_sender_force", opt_bool, LOFF(authenticated_sender_force) },
+ { "command_timeout", opt_time, LOFF(command_timeout) },
+ { "connect_timeout", opt_time, LOFF(connect_timeout) },
{ "connection_max_messages", opt_int | opt_public,
- (void *)offsetof(transport_instance, connection_max_messages) },
- { "data_timeout", opt_time,
- (void *)offsetof(smtp_transport_options_block, data_timeout) },
- { "delay_after_cutoff", opt_bool,
- (void *)offsetof(smtp_transport_options_block, delay_after_cutoff) },
+ OPT_OFF(transport_instance, connection_max_messages) },
+# ifdef SUPPORT_DANE
+ { "dane_require_tls_ciphers", opt_stringptr, LOFF(dane_require_tls_ciphers) },
+# endif
+ { "data_timeout", opt_time, LOFF(data_timeout) },
+ { "delay_after_cutoff", opt_bool, LOFF(delay_after_cutoff) },
#ifndef DISABLE_DKIM
- { "dkim_canon", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, dkim_canon) },
- { "dkim_domain", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, dkim_domain) },
- { "dkim_private_key", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, dkim_private_key) },
- { "dkim_selector", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, dkim_selector) },
- { "dkim_sign_headers", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, dkim_sign_headers) },
- { "dkim_strict", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, dkim_strict) },
-#endif
- { "dns_qualify_single", opt_bool,
- (void *)offsetof(smtp_transport_options_block, dns_qualify_single) },
- { "dns_search_parents", opt_bool,
- (void *)offsetof(smtp_transport_options_block, dns_search_parents) },
- { "dnssec_request_domains", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, dnssec.request) },
- { "dnssec_require_domains", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, dnssec.require) },
- { "dscp", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, dscp) },
- { "fallback_hosts", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, fallback_hosts) },
- { "final_timeout", opt_time,
- (void *)offsetof(smtp_transport_options_block, final_timeout) },
- { "gethostbyname", opt_bool,
- (void *)offsetof(smtp_transport_options_block, gethostbyname) },
- { "helo_data", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, helo_data) },
- { "hosts", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, hosts) },
- { "hosts_avoid_esmtp", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, hosts_avoid_esmtp) },
- { "hosts_avoid_pipelining", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, hosts_avoid_pipelining) },
-#ifdef SUPPORT_TLS
- { "hosts_avoid_tls", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, hosts_avoid_tls) },
-#endif
- { "hosts_max_try", opt_int,
- (void *)offsetof(smtp_transport_options_block, hosts_max_try) },
- { "hosts_max_try_hardlimit", opt_int,
- (void *)offsetof(smtp_transport_options_block, hosts_max_try_hardlimit) },
-#ifdef SUPPORT_TLS
- { "hosts_nopass_tls", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, hosts_nopass_tls) },
-#endif
- { "hosts_override", opt_bool,
- (void *)offsetof(smtp_transport_options_block, hosts_override) },
- { "hosts_randomize", opt_bool,
- (void *)offsetof(smtp_transport_options_block, hosts_randomize) },
-#if defined(SUPPORT_TLS) && !defined(DISABLE_OCSP)
- { "hosts_request_ocsp", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, hosts_request_ocsp) },
-#endif
- { "hosts_require_auth", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, hosts_require_auth) },
-#ifdef SUPPORT_TLS
-# ifdef EXPERIMENTAL_DANE
- { "hosts_require_dane", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, hosts_require_dane) },
+ { "dkim_canon", opt_stringptr, LOFF(dkim.dkim_canon) },
+ { "dkim_domain", opt_stringptr, LOFF(dkim.dkim_domain) },
+ { "dkim_hash", opt_stringptr, LOFF(dkim.dkim_hash) },
+ { "dkim_identity", opt_stringptr, LOFF(dkim.dkim_identity) },
+ { "dkim_private_key", opt_stringptr, LOFF(dkim.dkim_private_key) },
+ { "dkim_selector", opt_stringptr, LOFF(dkim.dkim_selector) },
+ { "dkim_sign_headers", opt_stringptr, LOFF(dkim.dkim_sign_headers) },
+ { "dkim_strict", opt_stringptr, LOFF(dkim.dkim_strict) },
+ { "dkim_timestamps", opt_stringptr, LOFF(dkim.dkim_timestamps) },
+#endif
+ { "dns_qualify_single", opt_bool, LOFF(dns_qualify_single) },
+ { "dns_search_parents", opt_bool, LOFF(dns_search_parents) },
+ { "dnssec_request_domains", opt_stringptr, LOFF(dnssec.request) },
+ { "dnssec_require_domains", opt_stringptr, LOFF(dnssec.require) },
+ { "dscp", opt_stringptr, LOFF(dscp) },
+ { "fallback_hosts", opt_stringptr, LOFF(fallback_hosts) },
+ { "final_timeout", opt_time, LOFF(final_timeout) },
+ { "gethostbyname", opt_bool, LOFF(gethostbyname) },
+ { "helo_data", opt_stringptr, LOFF(helo_data) },
+#if !defined(DISABLE_TLS) && !defined(DISABLE_TLS_RESUME)
+ { "host_name_extract", opt_stringptr, LOFF(host_name_extract) },
+# endif
+ { "hosts", opt_stringptr, LOFF(hosts) },
+ { "hosts_avoid_esmtp", opt_stringptr, LOFF(hosts_avoid_esmtp) },
+ { "hosts_avoid_pipelining", opt_stringptr, LOFF(hosts_avoid_pipelining) },
+#ifndef DISABLE_TLS
+ { "hosts_avoid_tls", opt_stringptr, LOFF(hosts_avoid_tls) },
+#endif
+ { "hosts_max_try", opt_int, LOFF(hosts_max_try) },
+ { "hosts_max_try_hardlimit", opt_int, LOFF(hosts_max_try_hardlimit) },
+#ifndef DISABLE_TLS
+ { "hosts_nopass_tls", opt_stringptr, LOFF(hosts_nopass_tls) },
+ { "hosts_noproxy_tls", opt_stringptr, LOFF(hosts_noproxy_tls) },
+#endif
+ { "hosts_override", opt_bool, LOFF(hosts_override) },
+#ifndef DISABLE_PIPE_CONNECT
+ { "hosts_pipe_connect", opt_stringptr, LOFF(hosts_pipe_connect) },
+#endif
+ { "hosts_randomize", opt_bool, LOFF(hosts_randomize) },
+#if !defined(DISABLE_TLS) && !defined(DISABLE_OCSP)
+ { "hosts_request_ocsp", opt_stringptr, LOFF(hosts_request_ocsp) },
+#endif
+ { "hosts_require_alpn", opt_stringptr, LOFF(hosts_require_alpn) },
+ { "hosts_require_auth", opt_stringptr, LOFF(hosts_require_auth) },
+#ifndef DISABLE_TLS
+# ifdef SUPPORT_DANE
+ { "hosts_require_dane", opt_stringptr, LOFF(hosts_require_dane) },
# endif
# ifndef DISABLE_OCSP
- { "hosts_require_ocsp", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, hosts_require_ocsp) },
+ { "hosts_require_ocsp", opt_stringptr, LOFF(hosts_require_ocsp) },
# endif
- { "hosts_require_tls", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, hosts_require_tls) },
+ { "hosts_require_tls", opt_stringptr, LOFF(hosts_require_tls) },
#endif
- { "hosts_try_auth", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, hosts_try_auth) },
-#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
- { "hosts_try_dane", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, hosts_try_dane) },
+ { "hosts_try_auth", opt_stringptr, LOFF(hosts_try_auth) },
+ { "hosts_try_chunking", opt_stringptr, LOFF(hosts_try_chunking) },
+#ifdef SUPPORT_DANE
+ { "hosts_try_dane", opt_stringptr, LOFF(hosts_try_dane) },
#endif
+ { "hosts_try_fastopen", opt_stringptr, LOFF(hosts_try_fastopen) },
#ifndef DISABLE_PRDR
- { "hosts_try_prdr", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, hosts_try_prdr) },
-#endif
-#ifdef SUPPORT_TLS
- { "hosts_verify_avoid_tls", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, hosts_verify_avoid_tls) },
-#endif
- { "interface", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, interface) },
- { "keepalive", opt_bool,
- (void *)offsetof(smtp_transport_options_block, keepalive) },
- { "lmtp_ignore_quota", opt_bool,
- (void *)offsetof(smtp_transport_options_block, lmtp_ignore_quota) },
+ { "hosts_try_prdr", opt_stringptr, LOFF(hosts_try_prdr) },
+#endif
+#ifndef DISABLE_TLS
+ { "hosts_verify_avoid_tls", opt_stringptr, LOFF(hosts_verify_avoid_tls) },
+#endif
+ { "interface", opt_stringptr, LOFF(interface) },
+ { "keepalive", opt_bool, LOFF(keepalive) },
+ { "lmtp_ignore_quota", opt_bool, LOFF(lmtp_ignore_quota) },
{ "max_rcpt", opt_int | opt_public,
- (void *)offsetof(transport_instance, max_addresses) },
+ OPT_OFF(transport_instance, max_addresses) },
+ { "message_linelength_limit", opt_int, LOFF(message_linelength_limit) },
{ "multi_domain", opt_expand_bool | opt_public,
- (void *)offsetof(transport_instance, multi_domain) },
- { "port", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, port) },
- { "protocol", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, protocol) },
- { "retry_include_ip_address", opt_expand_bool,
- (void *)offsetof(smtp_transport_options_block, retry_include_ip_address) },
- { "serialize_hosts", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, serialize_hosts) },
- { "size_addition", opt_int,
- (void *)offsetof(smtp_transport_options_block, size_addition) }
+ OPT_OFF(transport_instance, multi_domain) },
+ { "port", opt_stringptr, LOFF(port) },
+ { "protocol", opt_stringptr, LOFF(protocol) },
+ { "retry_include_ip_address", opt_expand_bool, LOFF(retry_include_ip_address) },
+ { "serialize_hosts", opt_stringptr, LOFF(serialize_hosts) },
+ { "size_addition", opt_int, LOFF(size_addition) },
#ifdef SUPPORT_SOCKS
- ,{ "socks_proxy", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, socks_proxy) }
-#endif
-#ifdef SUPPORT_TLS
- ,{ "tls_certificate", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, tls_certificate) },
- { "tls_crl", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, tls_crl) },
- { "tls_dh_min_bits", opt_int,
- (void *)offsetof(smtp_transport_options_block, tls_dh_min_bits) },
- { "tls_privatekey", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, tls_privatekey) },
- { "tls_require_ciphers", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, tls_require_ciphers) },
- { "tls_sni", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, tls_sni) },
- { "tls_tempfail_tryclear", opt_bool,
- (void *)offsetof(smtp_transport_options_block, tls_tempfail_tryclear) },
- { "tls_try_verify_hosts", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, tls_try_verify_hosts) },
- { "tls_verify_cert_hostnames", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block,tls_verify_cert_hostnames)},
- { "tls_verify_certificates", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, tls_verify_certificates) },
- { "tls_verify_hosts", opt_stringptr,
- (void *)offsetof(smtp_transport_options_block, tls_verify_hosts) }
+ { "socks_proxy", opt_stringptr, LOFF(socks_proxy) },
+#endif
+#ifndef DISABLE_TLS
+ { "tls_alpn", opt_stringptr, LOFF(tls_alpn) },
+ { "tls_certificate", opt_stringptr, LOFF(tls_certificate) },
+ { "tls_crl", opt_stringptr, LOFF(tls_crl) },
+ { "tls_dh_min_bits", opt_int, LOFF(tls_dh_min_bits) },
+ { "tls_privatekey", opt_stringptr, LOFF(tls_privatekey) },
+ { "tls_require_ciphers", opt_stringptr, LOFF(tls_require_ciphers) },
+# ifndef DISABLE_TLS_RESUME
+ { "tls_resumption_hosts", opt_stringptr, LOFF(tls_resumption_hosts) },
+# endif
+ { "tls_sni", opt_stringptr, LOFF(tls_sni) },
+ { "tls_tempfail_tryclear", opt_bool, LOFF(tls_tempfail_tryclear) },
+ { "tls_try_verify_hosts", opt_stringptr, LOFF(tls_try_verify_hosts) },
+ { "tls_verify_cert_hostnames", opt_stringptr, LOFF(tls_verify_cert_hostnames)},
+ { "tls_verify_certificates", opt_stringptr, LOFF(tls_verify_certificates) },
+ { "tls_verify_hosts", opt_stringptr, LOFF(tls_verify_hosts) },
+#endif
+#ifdef SUPPORT_I18N
+ { "utf8_downconvert", opt_stringptr, LOFF(utf8_downconvert) },
#endif
};
/* Size of the options list. An extern variable has to be used so that its
address can appear in the tables drtables.c. */
-int smtp_transport_options_count =
- sizeof(smtp_transport_options)/sizeof(optionlist);
+int smtp_transport_options_count = nelem(smtp_transport_options);
+
+
+#ifdef MACRO_PREDEF
+
+/* Dummy values */
+smtp_transport_options_block smtp_transport_option_defaults = {0};
+void smtp_transport_init(transport_instance *tblock) {}
+BOOL smtp_transport_entry(transport_instance *tblock, address_item *addr) {return FALSE;}
+void smtp_transport_closedown(transport_instance *tblock) {}
+
+#else /*!MACRO_PREDEF*/
+
/* Default private options block for the smtp transport. */
smtp_transport_options_block smtp_transport_option_defaults = {
- NULL, /* hosts */
- NULL, /* fallback_hosts */
- NULL, /* hostlist */
- NULL, /* fallback_hostlist */
- NULL, /* authenticated_sender */
- US"$primary_hostname", /* helo_data */
- NULL, /* interface */
- NULL, /* port */
- US"smtp", /* protocol */
- NULL, /* DSCP */
- NULL, /* serialize_hosts */
- NULL, /* hosts_try_auth */
- NULL, /* hosts_require_auth */
-#ifdef EXPERIMENTAL_DANE
- NULL, /* hosts_try_dane */
- NULL, /* hosts_require_dane */
+ /* All non-mentioned elements 0/NULL/FALSE */
+ .helo_data = US"$primary_hostname",
+ .protocol = US"smtp",
+ .hosts_try_chunking = US"*",
+#ifdef SUPPORT_DANE
+ .hosts_try_dane = US"*",
#endif
+ .hosts_try_fastopen = US"*",
#ifndef DISABLE_PRDR
- US"*", /* hosts_try_prdr */
+ .hosts_try_prdr = US"*",
#endif
#ifndef DISABLE_OCSP
- US"*", /* hosts_request_ocsp (except under DANE; tls_client_start()) */
- NULL, /* hosts_require_ocsp */
-#endif
- NULL, /* hosts_require_tls */
- NULL, /* hosts_avoid_tls */
- NULL, /* hosts_verify_avoid_tls */
- NULL, /* hosts_avoid_pipelining */
- NULL, /* hosts_avoid_esmtp */
- NULL, /* hosts_nopass_tls */
- 5*60, /* command_timeout */
- 5*60, /* connect_timeout; shorter system default overrides */
- 5*60, /* data timeout */
- 10*60, /* final timeout */
- 1024, /* size_addition */
- 5, /* hosts_max_try */
- 50, /* hosts_max_try_hardlimit */
- TRUE, /* address_retry_include_sender */
- FALSE, /* allow_localhost */
- FALSE, /* authenticated_sender_force */
- FALSE, /* gethostbyname */
- TRUE, /* dns_qualify_single */
- FALSE, /* dns_search_parents */
- { NULL, NULL }, /* dnssec_domains {request,require} */
- TRUE, /* delay_after_cutoff */
- FALSE, /* hosts_override */
- FALSE, /* hosts_randomize */
- TRUE, /* keepalive */
- FALSE, /* lmtp_ignore_quota */
- NULL, /* expand_retry_include_ip_address */
- TRUE /* retry_include_ip_address */
-#ifdef SUPPORT_SOCKS
- ,NULL /* socks_proxy */
-#endif
-#ifdef SUPPORT_TLS
- ,NULL, /* tls_certificate */
- NULL, /* tls_crl */
- NULL, /* tls_privatekey */
- NULL, /* tls_require_ciphers */
- NULL, /* tls_sni */
- US"system", /* tls_verify_certificates */
- EXIM_CLIENT_DH_DEFAULT_MIN_BITS,
- /* tls_dh_min_bits */
- TRUE, /* tls_tempfail_tryclear */
- NULL, /* tls_verify_hosts */
- US"*", /* tls_try_verify_hosts */
- US"*" /* tls_verify_cert_hostnames */
+ .hosts_request_ocsp = US"*", /* hosts_request_ocsp (except under DANE; tls_client_start()) */
+#endif
+ .command_timeout = 5*60,
+ .connect_timeout = 5*60,
+ .data_timeout = 5*60,
+ .final_timeout = 10*60,
+ .size_addition = 1024,
+ .hosts_max_try = 5,
+ .hosts_max_try_hardlimit = 50,
+ .message_linelength_limit = 998,
+ .address_retry_include_sender = TRUE,
+ .dns_qualify_single = TRUE,
+ .dnssec = { .request= US"*", .require=NULL },
+ .delay_after_cutoff = TRUE,
+ .keepalive = TRUE,
+ .retry_include_ip_address = TRUE,
+#ifndef DISABLE_TLS
+ .tls_verify_certificates = US"system",
+ .tls_dh_min_bits = EXIM_CLIENT_DH_DEFAULT_MIN_BITS,
+ .tls_tempfail_tryclear = TRUE,
+ .tls_try_verify_hosts = US"*",
+ .tls_verify_cert_hostnames = US"*",
+# ifndef DISABLE_TLS_RESUME
+ .host_name_extract = US"${if and {{match{$host}{.outlook.com\\$}} {match{$item}{\\N^250-([\\w.]+)\\s\\N}}} {$1}}",
+# endif
+#endif
+#ifdef SUPPORT_I18N
+ .utf8_downconvert = US"-1",
#endif
#ifndef DISABLE_DKIM
- ,NULL, /* dkim_canon */
- NULL, /* dkim_domain */
- NULL, /* dkim_private_key */
- NULL, /* dkim_selector */
- NULL, /* dkim_sign_headers */
- NULL /* dkim_strict */
+ .dkim =
+ { .dkim_hash = US"sha256", },
#endif
};
/* Local statics */
-static uschar *smtp_command; /* Points to last cmd for error messages */
-static uschar *mail_command; /* Points to MAIL cmd for error messages */
-static BOOL update_waiting; /* TRUE to update the "wait" database */
+static uschar *smtp_command; /* Points to last cmd for error messages */
+static uschar *mail_command; /* Points to MAIL cmd for error messages */
+static uschar *data_command = US""; /* Points to DATA cmd for error messages */
+static BOOL update_waiting; /* TRUE to update the "wait" database */
+
+/*XXX move to smtp_context */
+static BOOL pipelining_active; /* current transaction is in pipe mode */
+
+
+static unsigned ehlo_response(uschar * buf, unsigned checks);
+
+
+/******************************************************************************/
+
+void
+smtp_deliver_init(void)
+{
+struct list
+ {
+ const pcre2_code ** re;
+ const uschar * string;
+ } list[] =
+ {
+ { ®ex_AUTH, AUTHS_REGEX },
+ { ®ex_CHUNKING, US"\\n250[\\s\\-]CHUNKING(\\s|\\n|$)" },
+ { ®ex_DSN, US"\\n250[\\s\\-]DSN(\\s|\\n|$)" },
+ { ®ex_IGNOREQUOTA, US"\\n250[\\s\\-]IGNOREQUOTA(\\s|\\n|$)" },
+ { ®ex_PIPELINING, US"\\n250[\\s\\-]PIPELINING(\\s|\\n|$)" },
+ { ®ex_SIZE, US"\\n250[\\s\\-]SIZE(\\s|\\n|$)" },
+
+#ifndef DISABLE_TLS
+ { ®ex_STARTTLS, US"\\n250[\\s\\-]STARTTLS(\\s|\\n|$)" },
+#endif
+#ifndef DISABLE_PRDR
+ { ®ex_PRDR, US"\\n250[\\s\\-]PRDR(\\s|\\n|$)" },
+#endif
+#ifdef SUPPORT_I18N
+ { ®ex_UTF8, US"\\n250[\\s\\-]SMTPUTF8(\\s|\\n|$)" },
+#endif
+#ifndef DISABLE_PIPE_CONNECT
+ { ®ex_EARLY_PIPE, US"\\n250[\\s\\-]" EARLY_PIPE_FEATURE_NAME "(\\s|\\n|$)" },
+#endif
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+ { ®ex_LIMITS, US"\\n250[\\s\\-]LIMITS\\s" },
+#endif
+ };
+
+for (struct list * l = list; l < list + nelem(list); l++)
+ if (!*l->re)
+ *l->re = regex_must_compile(l->string, MCS_NOFLAGS, TRUE);
+}
/*************************************************
smtp_transport_setup(transport_instance *tblock, address_item *addrlist,
transport_feedback *tf, uid_t uid, gid_t gid, uschar **errmsg)
{
-smtp_transport_options_block *ob =
- (smtp_transport_options_block *)(tblock->options_block);
-
-errmsg = errmsg; /* Keep picky compilers happy */
-uid = uid;
-gid = gid;
+smtp_transport_options_block *ob = SOB tblock->options_block;
/* Pass back options if required. This interface is getting very messy. */
-if (tf != NULL)
+if (tf)
{
tf->interface = ob->interface;
tf->port = ob->port;
list. */
if (!testflag(addrlist, af_local_host_removed))
- {
- for (; addrlist != NULL; addrlist = addrlist->next)
- if (addrlist->fallback_hosts == NULL)
- addrlist->fallback_hosts = ob->fallback_hostlist;
- }
+ for (; addrlist; addrlist = addrlist->next)
+ if (!addrlist->fallback_hosts) addrlist->fallback_hosts = ob->fallback_hostlist;
return OK;
}
void
smtp_transport_init(transport_instance *tblock)
{
-smtp_transport_options_block *ob =
- (smtp_transport_options_block *)(tblock->options_block);
+smtp_transport_options_block *ob = SOB tblock->options_block;
+int old_pool = store_pool;
/* Retry_use_local_part defaults FALSE if unset */
/* Set the default port according to the protocol */
-if (ob->port == NULL)
- ob->port = (strcmpic(ob->protocol, US"lmtp") == 0)? US"lmtp" :
- (strcmpic(ob->protocol, US"smtps") == 0)? US"smtps" : US"smtp";
+if (!ob->port)
+ ob->port = strcmpic(ob->protocol, US"lmtp") == 0
+ ? US"lmtp"
+ : strcmpic(ob->protocol, US"smtps") == 0
+ ? US"smtps" : US"smtp";
/* Set up the setup entry point, to be called before subprocesses for this
transport. */
/* If hosts_override is set and there are local hosts, set the global
flag that stops verify from showing router hosts. */
-if (ob->hosts_override && ob->hosts != NULL) tblock->overrides_hosts = TRUE;
+if (ob->hosts_override && ob->hosts) tblock->overrides_hosts = TRUE;
/* If there are any fallback hosts listed, build a chain of host items
for them, but do not do any lookups at this time. */
-host_build_hostlist(&(ob->fallback_hostlist), ob->fallback_hosts, FALSE);
+store_pool = POOL_PERM;
+host_build_hostlist(&ob->fallback_hostlist, ob->fallback_hosts, FALSE);
+store_pool = old_pool;
}
host if set, mark addrs as having used this host
smtp_greeting from peer
helo_response from peer
+ start points to timestamp of delivery start
If errno_value has the special value ERRNO_CONNECTTIMEOUT, ETIMEDOUT is put in
the errno field, and RTEF_CTOUT is ORed into the more_errno field, to indicate
static void
set_errno(address_item *addrlist, int errno_value, uschar *msg, int rc,
- BOOL pass_message, host_item * host
+ BOOL pass_message, host_item * host,
#ifdef EXPERIMENTAL_DSN_INFO
- , const uschar * smtp_greeting, const uschar * helo_response
+ const uschar * smtp_greeting, const uschar * helo_response,
#endif
+ struct timeval * start
)
{
-address_item *addr;
int orvalue = 0;
+struct timeval deliver_time;
+
if (errno_value == ERRNO_CONNECTTIMEOUT)
{
errno_value = ETIMEDOUT;
orvalue = RTEF_CTOUT;
}
-for (addr = addrlist; addr; addr = addr->next)
+timesince(&deliver_time, start);
+
+for (address_item * addr = addrlist; addr; addr = addr->next)
if (addr->transport_return >= PENDING)
{
addr->basic_errno = errno_value;
addr->more_errno |= orvalue;
- if (msg != NULL)
+ addr->delivery_time = deliver_time;
+ if (msg)
{
addr->message = msg;
if (pass_message) setflag(addr, af_pass_message);
}
static void
-set_errno_nohost(address_item *addrlist, int errno_value, uschar *msg, int rc,
- BOOL pass_message)
+set_errno_nohost(address_item * addrlist, int errno_value, uschar * msg, int rc,
+ BOOL pass_message, struct timeval * start)
{
-set_errno(addrlist, errno_value, msg, rc, pass_message, NULL
+set_errno(addrlist, errno_value, msg, rc, pass_message, NULL,
#ifdef EXPERIMENTAL_DSN_INFO
- , NULL, NULL
+ NULL, NULL,
#endif
- );
+ start);
}
more_errno from the top address for use with ERRNO_FILTER_FAIL
buffer the SMTP response buffer
yield where to put a one-digit SMTP response code
- message where to put an errror message
+ message where to put an error message
pass_message set TRUE if message is an SMTP response
Returns: TRUE if an SMTP "QUIT" command should be sent, else FALSE
check_response(host_item *host, int *errno_value, int more_errno,
uschar *buffer, int *yield, uschar **message, BOOL *pass_message)
{
-uschar *pl = US"";
-
-if (smtp_use_pipelining &&
- (Ustrcmp(smtp_command, "MAIL") == 0 ||
- Ustrcmp(smtp_command, "RCPT") == 0 ||
- Ustrcmp(smtp_command, "DATA") == 0))
- pl = US"pipelined ";
+uschar * pl = pipelining_active ? US"pipelined " : US"";
+const uschar * s;
*yield = '4'; /* Default setting is to give a temporary error */
-/* Handle response timeout */
-
-if (*errno_value == ETIMEDOUT)
- {
- *message = US string_sprintf("SMTP timeout after %s%s",
- pl, smtp_command);
- if (transport_count > 0)
- *message = US string_sprintf("%s (%d bytes written)", *message,
- transport_count);
- return FALSE;
- }
-
-/* Handle malformed SMTP response */
-
-if (*errno_value == ERRNO_SMTPFORMAT)
- {
- const uschar *malfresp = string_printing(buffer);
- while (isspace(*malfresp)) malfresp++;
- *message = *malfresp == 0
- ? string_sprintf("Malformed SMTP reply (an empty line) "
- "in response to %s%s", pl, smtp_command)
- : string_sprintf("Malformed SMTP reply in response to %s%s: %s",
- pl, smtp_command, malfresp);
- return FALSE;
- }
-
-/* Handle a failed filter process error; can't send QUIT as we mustn't
-end the DATA. */
-
-if (*errno_value == ERRNO_FILTER_FAIL)
- {
- *message = US string_sprintf("transport filter process failed (%d)%s",
- more_errno,
- (more_errno == EX_EXECFAILED)? ": unable to execute command" : "");
- return FALSE;
- }
-
-/* Handle a failed add_headers expansion; can't send QUIT as we mustn't
-end the DATA. */
-
-if (*errno_value == ERRNO_CHHEADER_FAIL)
- {
- *message =
- US string_sprintf("failed to expand headers_add or headers_remove: %s",
- expand_string_message);
- return FALSE;
- }
-
-/* Handle failure to write a complete data block */
-
-if (*errno_value == ERRNO_WRITEINCOMPLETE)
+switch(*errno_value)
{
- *message = US string_sprintf("failed to write a data block");
- return FALSE;
- }
+ case ETIMEDOUT: /* Handle response timeout */
+ *message = US string_sprintf("SMTP timeout after %s%s",
+ pl, smtp_command);
+ if (transport_count > 0)
+ *message = US string_sprintf("%s (%d bytes written)", *message,
+ transport_count);
+ return FALSE;
+
+ case ERRNO_SMTPFORMAT: /* Handle malformed SMTP response */
+ s = string_printing(buffer);
+ while (isspace(*s)) s++;
+ *message = *s == 0
+ ? string_sprintf("Malformed SMTP reply (an empty line) "
+ "in response to %s%s", pl, smtp_command)
+ : string_sprintf("Malformed SMTP reply in response to %s%s: %s",
+ pl, smtp_command, s);
+ return FALSE;
+
+ case ERRNO_TLSFAILURE: /* Handle bad first read; can happen with
+ GnuTLS and TLS1.3 */
+ *message = US"bad first read from TLS conn";
+ return TRUE;
+
+ case ERRNO_FILTER_FAIL: /* Handle a failed filter process error;
+ can't send QUIT as we mustn't end the DATA. */
+ *message = string_sprintf("transport filter process failed (%d)%s",
+ more_errno,
+ more_errno == EX_EXECFAILED ? ": unable to execute command" : "");
+ return FALSE;
+
+ case ERRNO_CHHEADER_FAIL: /* Handle a failed add_headers expansion;
+ can't send QUIT as we mustn't end the DATA. */
+ *message =
+ string_sprintf("failed to expand headers_add or headers_remove: %s",
+ expand_string_message);
+ return FALSE;
+
+ case ERRNO_WRITEINCOMPLETE: /* failure to write a complete data block */
+ *message = US"failed to write a data block";
+ return FALSE;
#ifdef SUPPORT_I18N
-/* Handle lack of advertised SMTPUTF8, for international message */
-if (*errno_value == ERRNO_UTF8_FWD)
- {
- *message = US string_sprintf("utf8 support required but not offered for forwarding");
- DEBUG(D_deliver|D_transport) debug_printf("%s\n", *message);
- return TRUE;
- }
+ case ERRNO_UTF8_FWD: /* no advertised SMTPUTF8, for international message */
+ *message = US"utf8 support required but not offered for forwarding";
+ DEBUG(D_deliver|D_transport) debug_printf("%s\n", *message);
+ return TRUE;
#endif
+ }
/* Handle error responses from the remote mailer. */
if (buffer[0] != 0)
{
- const uschar *s = string_printing(buffer);
- *message = US string_sprintf("SMTP error from remote mail server after %s%s: "
- "%s", pl, smtp_command, s);
+ *message = string_sprintf("SMTP error from remote mail server after %s%s: "
+ "%s", pl, smtp_command, s = string_printing(buffer));
*pass_message = TRUE;
*yield = buffer[0];
return TRUE;
{
*errno_value = ERRNO_SMTPCLOSED;
*message = US string_sprintf("Remote host closed connection "
- "in response to %s%s", pl, smtp_command);
+ "in response to %s%s", pl, smtp_command);
}
-else *message = US string_sprintf("%s [%s]", host->name, host->address);
+else
+ *message = US string_sprintf("%s [%s]", host->name, host->address);
return FALSE;
}
/* This writes to the main log and to the message log.
Arguments:
- addr the address item containing error information
host the current host
+ detail the current message (addr_item->message)
+ basic_errno the errno (addr_item->basic_errno)
Returns: nothing
*/
static void
-write_logs(address_item *addr, host_item *host)
+write_logs(const host_item *host, const uschar *suffix, int basic_errno)
{
-uschar * message = string_sprintf("H=%s [%s]", host->name, host->address);
+gstring * message = LOGGING(outgoing_port)
+ ? string_fmt_append(NULL, "H=%s [%s]:%d", host->name, host->address,
+ host->port == PORT_NONE ? 25 : host->port)
+ : string_fmt_append(NULL, "H=%s [%s]", host->name, host->address);
-if (LOGGING(outgoing_port))
- message = string_sprintf("%s:%d", message,
- host->port == PORT_NONE ? 25 : host->port);
-if (addr->message)
+if (suffix)
{
- message = string_sprintf("%s: %s", message, addr->message);
- if (addr->basic_errno > 0)
- message = string_sprintf("%s: %s", message, strerror(addr->basic_errno));
- log_write(0, LOG_MAIN, "%s", message);
- deliver_msglog("%s %s\n", tod_stamp(tod_log), message);
+ message = string_fmt_append(message, ": %s", suffix);
+ if (basic_errno > 0)
+ message = string_fmt_append(message, ": %s", strerror(basic_errno));
}
else
- {
- const uschar * s = exim_errstr(addr->basic_errno);
- log_write(0, LOG_MAIN, "%s %s", message, s);
- deliver_msglog("%s %s %s\n", tod_stamp(tod_log), message, s);
- }
+ message = string_fmt_append(message, " %s", exim_errstr(basic_errno));
+
+log_write(0, LOG_MAIN, "%s", string_from_gstring(message));
+deliver_msglog("%s %s\n", tod_stamp(tod_log), message->s);
}
static void
Arguments:
addr the address item containing error information
host the current host
+ evstr the event
Returns: nothing
*/
static void
-deferred_event_raise(address_item *addr, host_item *host)
+deferred_event_raise(address_item * addr, host_item * host, uschar * evstr)
{
uschar * action = addr->transport->event_action;
const uschar * save_domain;
deliver_domain = addr->domain;
deliver_localpart = addr->local_part;
-(void) event_raise(action, US"msg:host:defer",
+(void) event_raise(action, evstr,
addr->message
? addr->basic_errno > 0
? string_sprintf("%s: %s", addr->message, strerror(addr->basic_errno))
: string_copy(addr->message)
: addr->basic_errno > 0
? string_copy(US strerror(addr->basic_errno))
- : NULL);
+ : NULL,
+ NULL);
deliver_localpart = save_local;
deliver_domain = save_domain;
#endif
/*************************************************
-* Synchronize SMTP responses *
+* Reap SMTP specific responses *
*************************************************/
+static int
+smtp_discard_responses(smtp_context * sx, smtp_transport_options_block * ob,
+ int count)
+{
+uschar flushbuffer[4096];
-/* This function is called from smtp_deliver() to receive SMTP responses from
-the server, and match them up with the commands to which they relate. When
-PIPELINING is not in use, this function is called after every command, and is
-therefore somewhat over-engineered, but it is simpler to use a single scheme
-that works both with and without PIPELINING instead of having two separate sets
-of code.
-
-The set of commands that are buffered up with pipelining may start with MAIL
-and may end with DATA; in between are RCPT commands that correspond to the
-addresses whose status is PENDING_DEFER. All other commands (STARTTLS, AUTH,
-etc.) are never buffered.
-
-Errors after MAIL or DATA abort the whole process leaving the response in the
-buffer. After MAIL, pending responses are flushed, and the original command is
-re-instated in big_buffer for error messages. For RCPT commands, the remote is
-permitted to reject some recipient addresses while accepting others. However
-certain errors clearly abort the whole process. Set the value in
-transport_return to PENDING_OK if the address is accepted. If there is a
-subsequent general error, it will get reset accordingly. If not, it will get
-converted to OK at the end.
+while (count-- > 0)
+ {
+ if (!smtp_read_response(sx, flushbuffer, sizeof(flushbuffer),
+ '2', ob->command_timeout)
+ && (errno != 0 || flushbuffer[0] == 0))
+ break;
+ }
+return count;
+}
-Arguments:
- addrlist the complete address list
- include_affixes TRUE if affixes include in RCPT
- sync_addr ptr to the ptr of the one to start scanning at (updated)
- host the host we are connected to
- count the number of responses to read
- address_retry_
- include_sender true if 4xx retry is to include the sender it its key
- pending_MAIL true if the first response is for MAIL
- pending_DATA 0 if last command sent was not DATA
- +1 if previously had a good recipient
- -1 if not previously had a good recipient
- inblock incoming SMTP block
- timeout timeout value
- buffer buffer for reading response
- buffsize size of buffer
-Returns: 3 if at least one address had 2xx and one had 5xx
- 2 if at least one address had 5xx but none had 2xx
- 1 if at least one host had a 2xx response, but none had 5xx
- 0 no address had 2xx or 5xx but no errors (all 4xx, or just DATA)
- -1 timeout while reading RCPT response
- -2 I/O or other non-response error for RCPT
- -3 DATA or MAIL failed - errno and buffer set
-*/
+/* Return boolean success */
-static int
-sync_responses(address_item *addrlist, BOOL include_affixes,
- address_item **sync_addr, host_item *host, int count,
- BOOL address_retry_include_sender, BOOL pending_MAIL,
- int pending_DATA, smtp_inblock *inblock, int timeout, uschar *buffer,
- int buffsize)
+static BOOL
+smtp_reap_banner(smtp_context * sx)
{
-address_item *addr = *sync_addr;
-int yield = 0;
-
-/* Handle the response for a MAIL command. On error, reinstate the original
-command in big_buffer for error message use, and flush any further pending
-responses before returning, except after I/O errors and timeouts. */
+BOOL good_response;
+#if defined(__linux__) && defined(TCP_QUICKACK)
+ { /* Hack to get QUICKACK disabled; has to be right after 3whs, and has to on->off */
+ int sock = sx->cctx.sock;
+ struct pollfd p = {.fd = sock, .events = POLLOUT};
+ if (poll(&p, 1, 1000) >= 0) /* retval test solely for compiler quitening */
+ {
+ (void) setsockopt(sock, IPPROTO_TCP, TCP_QUICKACK, US &on, sizeof(on));
+ (void) setsockopt(sock, IPPROTO_TCP, TCP_QUICKACK, US &off, sizeof(off));
+ }
+ }
+#endif
+good_response = smtp_read_response(sx, sx->buffer, sizeof(sx->buffer),
+ '2', (SOB sx->conn_args.ob)->command_timeout);
+#ifdef EXPERIMENTAL_DSN_INFO
+sx->smtp_greeting = string_copy(sx->buffer);
+#endif
+return good_response;
+}
-if (pending_MAIL)
+static BOOL
+smtp_reap_ehlo(smtp_context * sx)
+{
+if (!smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2',
+ (SOB sx->conn_args.ob)->command_timeout))
{
- count--;
- if (!smtp_read_response(inblock, buffer, buffsize, '2', timeout))
+ if (errno != 0 || sx->buffer[0] == 0 || sx->lmtp)
{
- Ustrcpy(big_buffer, mail_command); /* Fits, because it came from there! */
- if (errno == 0 && buffer[0] != 0)
- {
- uschar flushbuffer[4096];
- int save_errno = 0;
- if (buffer[0] == '4')
- {
- save_errno = ERRNO_MAIL4XX;
- addr->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
- }
- while (count-- > 0)
- {
- if (!smtp_read_response(inblock, flushbuffer, sizeof(flushbuffer),
- '2', timeout)
- && (errno != 0 || flushbuffer[0] == 0))
- break;
- }
- errno = save_errno;
- }
-
- if (pending_DATA) count--; /* Number of RCPT responses to come */
- while (count-- > 0) /* Mark any pending addrs with the host used */
- {
- while (addr->transport_return != PENDING_DEFER) addr = addr->next;
- addr->host_used = host;
- addr = addr->next;
- }
- return -3;
+#ifdef EXPERIMENTAL_DSN_INFO
+ sx->helo_response = string_copy(sx->buffer);
+#endif
+ return FALSE;
}
+ sx->esmtp = FALSE;
}
+#ifdef EXPERIMENTAL_DSN_INFO
+sx->helo_response = string_copy(sx->buffer);
+#endif
+#ifndef DISABLE_EVENT
+(void) event_raise(sx->conn_args.tblock->event_action,
+ US"smtp:ehlo", sx->buffer, NULL);
+#endif
+return TRUE;
+}
-if (pending_DATA) count--; /* Number of RCPT responses to come */
-
-/* Read and handle the required number of RCPT responses, matching each one up
-with an address by scanning for the next address whose status is PENDING_DEFER.
-*/
-while (count-- > 0)
- {
- while (addr->transport_return != PENDING_DEFER) addr = addr->next;
+/* Grab a string differentiating server behind a loadbalancer, for TLS
+resumption when such servers do not share a session-cache */
- /* The address was accepted */
- addr->host_used = host;
+static void
+ehlo_response_lbserver(smtp_context * sx, smtp_transport_options_block * ob)
+{
+#if !defined(DISABLE_TLS) && !defined(DISABLE_TLS_RESUME)
+const uschar * s;
+uschar * save_item = iterate_item;
- if (smtp_read_response(inblock, buffer, buffsize, '2', timeout))
- {
- yield |= 1;
- addr->transport_return = PENDING_OK;
+if (sx->conn_args.have_lbserver)
+ return;
+iterate_item = sx->buffer;
+s = expand_cstring(ob->host_name_extract);
+iterate_item = save_item;
+sx->conn_args.host_lbserver = s && !*s ? NULL : s;
+sx->conn_args.have_lbserver = TRUE;
+#endif
+}
- /* If af_dr_retry_exists is set, there was a routing delay on this address;
- ensure that any address-specific retry record is expunged. We do this both
- for the basic key and for the version that also includes the sender. */
- if (testflag(addr, af_dr_retry_exists))
- {
- uschar *altkey = string_sprintf("%s:<%s>", addr->address_retry_key,
- sender_address);
- retry_add_item(addr, altkey, rf_delete);
- retry_add_item(addr, addr->address_retry_key, rf_delete);
- }
- }
- /* Timeout while reading the response */
+/******************************************************************************/
- else if (errno == ETIMEDOUT)
- {
- uschar *message = string_sprintf("SMTP timeout after RCPT TO:<%s>",
- transport_rcpt_address(addr, include_affixes));
- set_errno_nohost(addrlist, ETIMEDOUT, message, DEFER, FALSE);
- retry_add_item(addr, addr->address_retry_key, 0);
- update_waiting = FALSE;
- return -1;
- }
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+/* If TLS, or TLS not offered, called with the EHLO response in the buffer.
+Check it for a LIMITS keyword and parse values into the smtp context structure.
- /* Handle other errors in obtaining an SMTP response by returning -1. This
- will cause all the addresses to be deferred. Restore the SMTP command in
- big_buffer for which we are checking the response, so the error message
- makes sense. */
+We don't bother with peers that we won't talk TLS to, even though they can,
+just ignore their LIMITS advice (if any) and treat them as if they do not.
+This saves us dealing with a duplicate set of values. */
- else if (errno != 0 || buffer[0] == 0)
- {
- string_format(big_buffer, big_buffer_size, "RCPT TO:<%s>",
- transport_rcpt_address(addr, include_affixes));
- return -2;
- }
+static void
+ehlo_response_limits_read(smtp_context * sx)
+{
+uschar * match;
- /* Handle SMTP permanent and temporary response codes. */
+/* matches up to just after the first space after the keyword */
- else
+if (regex_match(regex_LIMITS, sx->buffer, -1, &match))
+ for (const uschar * s = sx->buffer + Ustrlen(match); *s; )
{
- addr->message =
- string_sprintf("SMTP error from remote mail server after RCPT TO:<%s>: "
- "%s", transport_rcpt_address(addr, include_affixes),
- string_printing(buffer));
- setflag(addr, af_pass_message);
- msglog_line(host, addr->message);
-
- /* The response was 5xx */
+ while (isspace(*s)) s++;
+ if (*s == '\n') break;
- if (buffer[0] == '5')
+ if (strncmpic(s, US"MAILMAX=", 8) == 0)
{
- addr->transport_return = FAIL;
- yield |= 2;
+ sx->peer_limit_mail = atoi(CS (s += 8));
+ while (isdigit(*s)) s++;
}
-
- /* The response was 4xx */
-
- else
+ else if (strncmpic(s, US"RCPTMAX=", 8) == 0)
{
- addr->transport_return = DEFER;
- addr->basic_errno = ERRNO_RCPT4XX;
- addr->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
+ sx->peer_limit_rcpt = atoi(CS (s += 8));
+ while (isdigit(*s)) s++;
+ }
+ else if (strncmpic(s, US"RCPTDOMAINMAX=", 14) == 0)
+ {
+ sx->peer_limit_rcptdom = atoi(CS (s += 14));
+ while (isdigit(*s)) s++;
+ }
+ else
+ while (*s && !isspace(*s)) s++;
+ }
+}
-#ifndef DISABLE_EVENT
- event_defer_errno = addr->more_errno;
- msg_event_raise(US"msg:rcpt:host:defer", addr);
-#endif
+/* Apply given values to the current connection */
+static void
+ehlo_limits_apply(smtp_context * sx,
+ unsigned limit_mail, unsigned limit_rcpt, unsigned limit_rcptdom)
+{
+if (limit_mail && limit_mail < sx->max_mail) sx->max_mail = limit_mail;
+if (limit_rcpt && limit_rcpt < sx->max_rcpt) sx->max_rcpt = limit_rcpt;
+if (limit_rcptdom)
+ {
+ DEBUG(D_transport) debug_printf("will treat as !multi_domain\n");
+ sx->single_rcpt_domain = TRUE;
+ }
+}
- /* Log temporary errors if there are more hosts to be tried.
- If not, log this last one in the == line. */
+/* Apply values from EHLO-resp to the current connection */
+static void
+ehlo_response_limits_apply(smtp_context * sx)
+{
+ehlo_limits_apply(sx, sx->peer_limit_mail, sx->peer_limit_rcpt,
+ sx->peer_limit_rcptdom);
+}
- if (host->next)
- log_write(0, LOG_MAIN, "H=%s [%s]: %s", host->name, host->address, addr->message);
+/* Apply values read from cache to the current connection */
+static void
+ehlo_cache_limits_apply(smtp_context * sx)
+{
+# ifndef DISABLE_PIPE_CONNECT
+ehlo_limits_apply(sx, sx->ehlo_resp.limit_mail, sx->ehlo_resp.limit_rcpt,
+ sx->ehlo_resp.limit_rcptdom);
+# endif
+}
+#endif /*EXPERIMENTAL_ESMTP_LIMITS*/
-#ifndef DISABLE_EVENT
- else
- msg_event_raise(US"msg:rcpt:defer", addr);
-#endif
+/******************************************************************************/
- /* Do not put this message on the list of those waiting for specific
- hosts, as otherwise it is likely to be tried too often. */
+#ifndef DISABLE_PIPE_CONNECT
+static uschar *
+ehlo_cache_key(const smtp_context * sx)
+{
+host_item * host = sx->conn_args.host;
+return Ustrchr(host->address, ':')
+ ? string_sprintf("[%s]:%d.EHLO", host->address,
+ host->port == PORT_NONE ? sx->port : host->port)
+ : string_sprintf("%s:%d.EHLO", host->address,
+ host->port == PORT_NONE ? sx->port : host->port);
+}
- update_waiting = FALSE;
+/* Cache EHLO-response info for use by early-pipe.
+Called
+- During a normal flow on EHLO response (either cleartext or under TLS),
+ when we are willing to do PIPECONNECT and it is offered
+- During an early-pipe flow on receiving the actual EHLO response and noting
+ disparity versus the cached info used, when PIPECONNECT is still being offered
- /* Add a retry item for the address so that it doesn't get tried again
- too soon. If address_retry_include_sender is true, add the sender address
- to the retry key. */
+We assume that suitable values have been set in the sx.ehlo_resp structure for
+features and auths; we handle the copy of limits. */
- if (address_retry_include_sender)
- {
- uschar *altkey = string_sprintf("%s:<%s>", addr->address_retry_key,
- sender_address);
- retry_add_item(addr, altkey, 0);
- }
- else retry_add_item(addr, addr->address_retry_key, 0);
+static void
+write_ehlo_cache_entry(smtp_context * sx)
+{
+open_db dbblock, * dbm_file;
+
+# ifdef EXPERIMENTAL_ESMTP_LIMITS
+sx->ehlo_resp.limit_mail = sx->peer_limit_mail;
+sx->ehlo_resp.limit_rcpt = sx->peer_limit_rcpt;
+sx->ehlo_resp.limit_rcptdom = sx->peer_limit_rcptdom;
+# endif
+
+if ((dbm_file = dbfn_open(US"misc", O_RDWR, &dbblock, TRUE, TRUE)))
+ {
+ uschar * ehlo_resp_key = ehlo_cache_key(sx);
+ dbdata_ehlo_resp er = { .data = sx->ehlo_resp };
+
+ HDEBUG(D_transport)
+# ifdef EXPERIMENTAL_ESMTP_LIMITS
+ if (sx->ehlo_resp.limit_mail || sx->ehlo_resp.limit_rcpt || sx->ehlo_resp.limit_rcptdom)
+ debug_printf("writing clr %04x/%04x cry %04x/%04x lim %05d/%05d/%05d\n",
+ sx->ehlo_resp.cleartext_features, sx->ehlo_resp.cleartext_auths,
+ sx->ehlo_resp.crypted_features, sx->ehlo_resp.crypted_auths,
+ sx->ehlo_resp.limit_mail, sx->ehlo_resp.limit_rcpt,
+ sx->ehlo_resp.limit_rcptdom);
+ else
+# endif
+ debug_printf("writing clr %04x/%04x cry %04x/%04x\n",
+ sx->ehlo_resp.cleartext_features, sx->ehlo_resp.cleartext_auths,
+ sx->ehlo_resp.crypted_features, sx->ehlo_resp.crypted_auths);
+
+ dbfn_write(dbm_file, ehlo_resp_key, &er, (int)sizeof(er));
+ dbfn_close(dbm_file);
+ }
+}
+
+static void
+invalidate_ehlo_cache_entry(smtp_context * sx)
+{
+open_db dbblock, * dbm_file;
+
+if ( sx->early_pipe_active
+ && (dbm_file = dbfn_open(US"misc", O_RDWR, &dbblock, TRUE, TRUE)))
+ {
+ uschar * ehlo_resp_key = ehlo_cache_key(sx);
+ dbfn_delete(dbm_file, ehlo_resp_key);
+ dbfn_close(dbm_file);
+ }
+}
+
+static BOOL
+read_ehlo_cache_entry(smtp_context * sx)
+{
+open_db dbblock;
+open_db * dbm_file;
+
+if (!(dbm_file = dbfn_open(US"misc", O_RDONLY, &dbblock, FALSE, TRUE)))
+ { DEBUG(D_transport) debug_printf("ehlo-cache: no misc DB\n"); }
+else
+ {
+ uschar * ehlo_resp_key = ehlo_cache_key(sx);
+ dbdata_ehlo_resp * er;
+
+ if (!(er = dbfn_read_enforce_length(dbm_file, ehlo_resp_key, sizeof(dbdata_ehlo_resp))))
+ { DEBUG(D_transport) debug_printf("no ehlo-resp record\n"); }
+ else if (time(NULL) - er->time_stamp > retry_data_expire)
+ {
+ DEBUG(D_transport) debug_printf("ehlo-resp record too old\n");
+ dbfn_close(dbm_file);
+ if ((dbm_file = dbfn_open(US"misc", O_RDWR, &dbblock, TRUE, TRUE)))
+ dbfn_delete(dbm_file, ehlo_resp_key);
+ }
+ else
+ {
+ DEBUG(D_transport)
+# ifdef EXPERIMENTAL_ESMTP_LIMITS
+ if (er->data.limit_mail || er->data.limit_rcpt || er->data.limit_rcptdom)
+ debug_printf("EHLO response bits from cache:"
+ " cleartext 0x%04x/0x%04x crypted 0x%04x/0x%04x lim %05d/%05d/%05d\n",
+ er->data.cleartext_features, er->data.cleartext_auths,
+ er->data.crypted_features, er->data.crypted_auths,
+ er->data.limit_mail, er->data.limit_rcpt, er->data.limit_rcptdom);
+ else
+# endif
+ debug_printf("EHLO response bits from cache:"
+ " cleartext 0x%04x/0x%04x crypted 0x%04x/0x%04x\n",
+ er->data.cleartext_features, er->data.cleartext_auths,
+ er->data.crypted_features, er->data.crypted_auths);
+
+ sx->ehlo_resp = er->data;
+# ifdef EXPERIMENTAL_ESMTP_LIMITS
+ ehlo_cache_limits_apply(sx);
+# endif
+ dbfn_close(dbm_file);
+ return TRUE;
+ }
+ dbfn_close(dbm_file);
+ }
+return FALSE;
+}
+
+
+
+/* Return an auths bitmap for the set of AUTH methods offered by the server
+which match our client-side authenticators. */
+
+static unsigned short
+study_ehlo_auths(smtp_context * sx)
+{
+uschar * names;
+auth_instance * au;
+uschar authnum;
+unsigned short authbits = 0;
+
+if (!sx->esmtp) return 0;
+if (!regex_AUTH) regex_AUTH = regex_must_compile(AUTHS_REGEX, MCS_NOFLAGS, TRUE);
+if (!regex_match_and_setup(regex_AUTH, sx->buffer, 0, -1)) return 0;
+expand_nmax = -1; /* reset */
+names = string_copyn(expand_nstring[1], expand_nlength[1]);
+
+for (au = auths, authnum = 0; au; au = au->next, authnum++) if (au->client)
+ {
+ const uschar * list = names;
+ uschar * s;
+ for (int sep = ' '; s = string_nextinlist(&list, &sep, NULL, 0); )
+ if (strcmpic(au->public_name, s) == 0)
+ { authbits |= BIT(authnum); break; }
+ }
+
+DEBUG(D_transport)
+ debug_printf("server offers %s AUTH, methods '%s', usable-bitmap 0x%04x\n",
+ tls_out.active.sock >= 0 ? "crypted" : "plaintext", names, authbits);
+
+if (tls_out.active.sock >= 0)
+ sx->ehlo_resp.crypted_auths = authbits;
+else
+ sx->ehlo_resp.cleartext_auths = authbits;
+return authbits;
+}
+
+
+
+
+/* Wait for and check responses for early-pipelining.
+
+Called from the lower-level smtp_read_response() function
+used for general code that assume synchronisation, if context
+flags indicate outstanding early-pipelining commands. Also
+called fom sync_responses() which handles pipelined commands.
+
+Arguments:
+ sx smtp connection context
+ countp number of outstanding responses, adjusted on return
+
+Return:
+ OK all well
+ DEFER error on first read of TLS'd conn
+ FAIL SMTP error in response
+*/
+int
+smtp_reap_early_pipe(smtp_context * sx, int * countp)
+{
+BOOL pending_BANNER = sx->pending_BANNER;
+BOOL pending_EHLO = sx->pending_EHLO;
+int rc = FAIL;
+
+sx->pending_BANNER = FALSE; /* clear early to avoid recursion */
+sx->pending_EHLO = FALSE;
+
+if (pending_BANNER)
+ {
+ DEBUG(D_transport) debug_printf("%s expect banner\n", __FUNCTION__);
+ (*countp)--;
+ if (!smtp_reap_banner(sx))
+ {
+ DEBUG(D_transport) debug_printf("bad banner\n");
+ if (tls_out.active.sock >= 0) rc = DEFER;
+ goto fail;
+ }
+ /*XXX EXPERIMENTAL_ESMTP_LIMITS ? */
+ ehlo_response_lbserver(sx, sx->conn_args.ob);
+ }
+
+if (pending_EHLO)
+ {
+ unsigned peer_offered;
+ unsigned short authbits = 0, * ap;
+
+ DEBUG(D_transport) debug_printf("%s expect ehlo\n", __FUNCTION__);
+ (*countp)--;
+ if (!smtp_reap_ehlo(sx))
+ {
+ DEBUG(D_transport) debug_printf("bad response for EHLO\n");
+ if (tls_out.active.sock >= 0) rc = DEFER;
+ goto fail;
+ }
+
+ /* Compare the actual EHLO response extensions and AUTH methods to the cached
+ value we assumed; on difference, dump or rewrite the cache and arrange for a
+ retry. */
+
+ ap = tls_out.active.sock < 0
+ ? &sx->ehlo_resp.cleartext_auths : &sx->ehlo_resp.crypted_auths;
+
+ peer_offered = ehlo_response(sx->buffer,
+ (tls_out.active.sock < 0 ? OPTION_TLS : 0)
+ | OPTION_CHUNKING | OPTION_PRDR | OPTION_DSN | OPTION_PIPE | OPTION_SIZE
+ | OPTION_UTF8 | OPTION_EARLY_PIPE
+ );
+# ifdef EXPERIMENTAL_ESMTP_LIMITS
+ if (tls_out.active.sock >= 0 || !(peer_offered & OPTION_TLS))
+ ehlo_response_limits_read(sx);
+# endif
+ if ( peer_offered != sx->peer_offered
+ || (authbits = study_ehlo_auths(sx)) != *ap)
+ {
+ HDEBUG(D_transport)
+ debug_printf("EHLO %s extensions changed, 0x%04x/0x%04x -> 0x%04x/0x%04x\n",
+ tls_out.active.sock < 0 ? "cleartext" : "crypted",
+ sx->peer_offered, *ap, peer_offered, authbits);
+ if (peer_offered & OPTION_EARLY_PIPE)
+ {
+ *(tls_out.active.sock < 0
+ ? &sx->ehlo_resp.cleartext_features : &sx->ehlo_resp.crypted_features) =
+ peer_offered;
+ *ap = authbits;
+ write_ehlo_cache_entry(sx);
+ }
+ else
+ invalidate_ehlo_cache_entry(sx);
+
+ return OK; /* just carry on */
+ }
+# ifdef EXPERIMENTAL_ESMTP_LIMITS
+ /* If we are handling LIMITS, compare the actual EHLO LIMITS values with the
+ cached values and invalidate cache if different. OK to carry on with
+ connect since values are advisory. */
+ {
+ if ( (tls_out.active.sock >= 0 || !(peer_offered & OPTION_TLS))
+ && ( sx->peer_limit_mail != sx->ehlo_resp.limit_mail
+ || sx->peer_limit_rcpt != sx->ehlo_resp.limit_rcpt
+ || sx->peer_limit_rcptdom != sx->ehlo_resp.limit_rcptdom
+ ) )
+ {
+ HDEBUG(D_transport)
+ {
+ debug_printf("EHLO LIMITS changed:");
+ if (sx->peer_limit_mail != sx->ehlo_resp.limit_mail)
+ debug_printf(" MAILMAX %u -> %u\n", sx->ehlo_resp.limit_mail, sx->peer_limit_mail);
+ else if (sx->peer_limit_rcpt != sx->ehlo_resp.limit_rcpt)
+ debug_printf(" RCPTMAX %u -> %u\n", sx->ehlo_resp.limit_rcpt, sx->peer_limit_rcpt);
+ else
+ debug_printf(" RCPTDOMAINMAX %u -> %u\n", sx->ehlo_resp.limit_rcptdom, sx->peer_limit_rcptdom);
+ }
+ invalidate_ehlo_cache_entry(sx);
+ }
+ }
+# endif
+ }
+return OK;
+
+fail:
+ invalidate_ehlo_cache_entry(sx);
+ (void) smtp_discard_responses(sx, sx->conn_args.ob, *countp);
+ return rc;
+}
+#endif /*!DISABLE_PIPE_CONNECT*/
+
+
+/*************************************************
+* Synchronize SMTP responses *
+*************************************************/
+
+/* This function is called from smtp_deliver() to receive SMTP responses from
+the server, and match them up with the commands to which they relate. When
+PIPELINING is not in use, this function is called after every command, and is
+therefore somewhat over-engineered, but it is simpler to use a single scheme
+that works both with and without PIPELINING instead of having two separate sets
+of code.
+
+The set of commands that are buffered up with pipelining may start with MAIL
+and may end with DATA; in between are RCPT commands that correspond to the
+addresses whose status is PENDING_DEFER. All other commands (STARTTLS, AUTH,
+etc.) are never buffered.
+
+Errors after MAIL or DATA abort the whole process leaving the response in the
+buffer. After MAIL, pending responses are flushed, and the original command is
+re-instated in big_buffer for error messages. For RCPT commands, the remote is
+permitted to reject some recipient addresses while accepting others. However
+certain errors clearly abort the whole process. Set the value in
+transport_return to PENDING_OK if the address is accepted. If there is a
+subsequent general error, it will get reset accordingly. If not, it will get
+converted to OK at the end.
+
+Arguments:
+ sx smtp connection context
+ count the number of responses to read
+ pending_DATA 0 if last command sent was not DATA
+ +1 if previously had a good recipient
+ -1 if not previously had a good recipient
+
+Returns: 3 if at least one address had 2xx and one had 5xx
+ 2 if at least one address had 5xx but none had 2xx
+ 1 if at least one host had a 2xx response, but none had 5xx
+ 0 no address had 2xx or 5xx but no errors (all 4xx, or just DATA)
+ -1 timeout while reading RCPT response
+ -2 I/O or other non-response error for RCPT
+ -3 DATA or MAIL failed - errno and buffer set
+ -4 banner or EHLO failed (early-pipelining)
+ -5 banner or EHLO failed (early-pipelining, TLS)
+*/
+
+static int
+sync_responses(smtp_context * sx, int count, int pending_DATA)
+{
+address_item * addr = sx->sync_addr;
+smtp_transport_options_block * ob = sx->conn_args.ob;
+int yield = 0;
+
+#ifndef DISABLE_PIPE_CONNECT
+int rc;
+if ((rc = smtp_reap_early_pipe(sx, &count)) != OK)
+ return rc == FAIL ? -4 : -5;
+#endif
+
+/* Handle the response for a MAIL command. On error, reinstate the original
+command in big_buffer for error message use, and flush any further pending
+responses before returning, except after I/O errors and timeouts. */
+
+if (sx->pending_MAIL)
+ {
+ DEBUG(D_transport) debug_printf("%s expect mail\n", __FUNCTION__);
+ count--;
+ sx->pending_MAIL = sx->RCPT_452 = FALSE;
+ if (!smtp_read_response(sx, sx->buffer, sizeof(sx->buffer),
+ '2', ob->command_timeout))
+ {
+ DEBUG(D_transport) debug_printf("bad response for MAIL\n");
+ Ustrcpy(big_buffer, mail_command); /* Fits, because it came from there! */
+ if (errno == ERRNO_TLSFAILURE)
+ return -5;
+ if (errno == 0 && sx->buffer[0] != 0)
+ {
+ int save_errno = 0;
+ if (sx->buffer[0] == '4')
+ {
+ save_errno = ERRNO_MAIL4XX;
+ addr->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
+ }
+ count = smtp_discard_responses(sx, ob, count);
+ errno = save_errno;
+ }
+
+ if (pending_DATA) count--; /* Number of RCPT responses to come */
+ while (count-- > 0) /* Mark any pending addrs with the host used */
+ {
+ while (addr->transport_return != PENDING_DEFER) addr = addr->next;
+ addr->host_used = sx->conn_args.host;
+ addr = addr->next;
+ }
+ return -3;
+ }
+ }
+
+if (pending_DATA) count--; /* Number of RCPT responses to come */
+
+/* Read and handle the required number of RCPT responses, matching each one up
+with an address by scanning for the next address whose status is PENDING_DEFER.
+*/
+
+while (count-- > 0)
+ {
+ while (addr->transport_return != PENDING_DEFER)
+ if (!(addr = addr->next))
+ return -2;
+
+ /* The address was accepted */
+ addr->host_used = sx->conn_args.host;
+
+ DEBUG(D_transport) debug_printf("%s expect rcpt for %s\n", __FUNCTION__, addr->address);
+ if (smtp_read_response(sx, sx->buffer, sizeof(sx->buffer),
+ '2', ob->command_timeout))
+ {
+ yield |= 1;
+ addr->transport_return = PENDING_OK;
+
+ /* If af_dr_retry_exists is set, there was a routing delay on this address;
+ ensure that any address-specific retry record is expunged. We do this both
+ for the basic key and for the version that also includes the sender. */
+
+ if (testflag(addr, af_dr_retry_exists))
+ {
+ uschar *altkey = string_sprintf("%s:<%s>", addr->address_retry_key,
+ sender_address);
+ retry_add_item(addr, altkey, rf_delete);
+ retry_add_item(addr, addr->address_retry_key, rf_delete);
+ }
+ }
+
+ /* Error on first TLS read */
+
+ else if (errno == ERRNO_TLSFAILURE)
+ return -5;
+
+ /* Timeout while reading the response */
+
+ else if (errno == ETIMEDOUT)
+ {
+ uschar *message = string_sprintf("SMTP timeout after RCPT TO:<%s>",
+ transport_rcpt_address(addr, sx->conn_args.tblock->rcpt_include_affixes));
+ set_errno_nohost(sx->first_addr, ETIMEDOUT, message, DEFER, FALSE, &sx->delivery_start);
+ retry_add_item(addr, addr->address_retry_key, 0);
+ update_waiting = FALSE;
+ return -1;
+ }
+
+ /* Handle other errors in obtaining an SMTP response by returning -1. This
+ will cause all the addresses to be deferred. Restore the SMTP command in
+ big_buffer for which we are checking the response, so the error message
+ makes sense. */
+
+ else if (errno != 0 || sx->buffer[0] == 0)
+ {
+ gstring gs = { .size = big_buffer_size, .ptr = 0, .s = big_buffer }, * g = &gs;
+
+ /* Use taint-unchecked routines for writing into big_buffer, trusting
+ that we'll never expand it. */
+
+ g = string_fmt_append_f(g, SVFMT_TAINT_NOCHK, "RCPT TO:<%s>",
+ transport_rcpt_address(addr, sx->conn_args.tblock->rcpt_include_affixes));
+ string_from_gstring(g);
+ return -2;
+ }
+
+ /* Handle SMTP permanent and temporary response codes. */
+
+ else
+ {
+ addr->message =
+ string_sprintf("SMTP error from remote mail server after RCPT TO:<%s>: "
+ "%s", transport_rcpt_address(addr, sx->conn_args.tblock->rcpt_include_affixes),
+ string_printing(sx->buffer));
+ setflag(addr, af_pass_message);
+ if (!sx->verify)
+ msglog_line(sx->conn_args.host, addr->message);
+
+ /* The response was 5xx */
+
+ if (sx->buffer[0] == '5')
+ {
+ addr->transport_return = FAIL;
+ yield |= 2;
+ }
+
+ /* The response was 4xx */
+
+ else
+ {
+ addr->transport_return = DEFER;
+ addr->basic_errno = ERRNO_RCPT4XX;
+ addr->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
+
+ if (!sx->verify)
+ {
+#ifndef DISABLE_EVENT
+ event_defer_errno = addr->more_errno;
+ msg_event_raise(US"msg:rcpt:host:defer", addr);
+#endif
+ /* If a 452 and we've had at least one 2xx or 5xx, set next_addr to the
+ start point for another MAIL command. */
+
+ if (addr->more_errno >> 8 == 52 && yield & 3)
+ {
+ if (!sx->RCPT_452) /* initialised at MAIL-ack above */
+ {
+ DEBUG(D_transport)
+ debug_printf("%s: seen first 452 too-many-rcpts\n", __FUNCTION__);
+ sx->RCPT_452 = TRUE;
+ sx->next_addr = addr;
+ }
+ addr->transport_return = PENDING_DEFER;
+ addr->basic_errno = 0;
+ }
+ else
+ {
+ /* Log temporary errors if there are more hosts to be tried.
+ If not, log this last one in the == line. */
+
+ if (sx->conn_args.host->next)
+ if (LOGGING(outgoing_port))
+ log_write(0, LOG_MAIN, "H=%s [%s]:%d %s", sx->conn_args.host->name,
+ sx->conn_args.host->address,
+ sx->port == PORT_NONE ? 25 : sx->port, addr->message);
+ else
+ log_write(0, LOG_MAIN, "H=%s [%s]: %s", sx->conn_args.host->name,
+ sx->conn_args.host->address, addr->message);
+
+#ifndef DISABLE_EVENT
+ else
+ msg_event_raise(US"msg:rcpt:defer", addr);
+#endif
+
+ /* Do not put this message on the list of those waiting for specific
+ hosts, as otherwise it is likely to be tried too often. */
+
+ update_waiting = FALSE;
+
+ /* Add a retry item for the address so that it doesn't get tried again
+ too soon. If address_retry_include_sender is true, add the sender address
+ to the retry key. */
+
+ retry_add_item(addr,
+ ob->address_retry_include_sender
+ ? string_sprintf("%s:<%s>", addr->address_retry_key, sender_address)
+ : addr->address_retry_key,
+ 0);
+ }
+ }
}
}
+ if (count && !(addr = addr->next))
+ return -2;
} /* Loop for next RCPT response */
/* Update where to start at for the next block of responses, unless we
have already handled all the addresses. */
-if (addr != NULL) *sync_addr = addr->next;
+if (addr) sx->sync_addr = addr->next;
/* Handle a response to DATA. If we have not had any good recipients, either
previously or in this block, the response is ignored. */
-if (pending_DATA != 0 &&
- !smtp_read_response(inblock, buffer, buffsize, '3', timeout))
+if (pending_DATA != 0)
{
- int code;
- uschar *msg;
- BOOL pass_message;
- if (pending_DATA > 0 || (yield & 1) != 0)
+ DEBUG(D_transport) debug_printf("%s expect data\n", __FUNCTION__);
+ if (!smtp_read_response(sx, sx->buffer, sizeof(sx->buffer),
+ '3', ob->command_timeout))
{
- if (errno == 0 && buffer[0] == '4')
+ int code;
+ uschar *msg;
+ BOOL pass_message;
+
+ if (errno == ERRNO_TLSFAILURE) /* Error on first TLS read */
+ return -5;
+
+ if (pending_DATA > 0 || (yield & 1) != 0)
{
- errno = ERRNO_DATA4XX;
- addrlist->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
+ if (errno == 0 && sx->buffer[0] == '4')
+ {
+ errno = ERRNO_DATA4XX;
+ sx->first_addr->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
+ }
+ return -3;
}
- return -3;
+ (void)check_response(sx->conn_args.host, &errno, 0, sx->buffer, &code, &msg, &pass_message);
+ DEBUG(D_transport) debug_printf("%s\nerror for DATA ignored: pipelining "
+ "is in use and there were no good recipients\n", msg);
+ }
+ }
+
+/* All responses read and handled; MAIL (if present) received 2xx and DATA (if
+present) received 3xx. If any RCPTs were handled and yielded anything other
+than 4xx, yield will be set non-zero. */
+
+return yield;
+}
+
+
+
+
+
+/* Try an authenticator's client entry */
+
+static int
+try_authenticator(smtp_context * sx, auth_instance * au)
+{
+smtp_transport_options_block * ob = sx->conn_args.ob; /* transport options */
+host_item * host = sx->conn_args.host; /* host to deliver to */
+int rc;
+
+/* Set up globals for error messages */
+
+authenticator_name = au->name;
+driver_srcfile = au->srcfile;
+driver_srcline = au->srcline;
+
+sx->outblock.authenticating = TRUE;
+rc = (au->info->clientcode)(au, sx, ob->command_timeout,
+ sx->buffer, sizeof(sx->buffer));
+sx->outblock.authenticating = FALSE;
+driver_srcfile = authenticator_name = NULL; driver_srcline = 0;
+DEBUG(D_transport) debug_printf("%s authenticator yielded %s\n", au->name, rc_names[rc]);
+
+/* A temporary authentication failure must hold up delivery to
+this host. After a permanent authentication failure, we carry on
+to try other authentication methods. If all fail hard, try to
+deliver the message unauthenticated unless require_auth was set. */
+
+switch(rc)
+ {
+ case OK:
+ f.smtp_authenticated = TRUE; /* stops the outer loop */
+ client_authenticator = au->name;
+ if (au->set_client_id)
+ client_authenticated_id = expand_string(au->set_client_id);
+ break;
+
+ /* Failure after writing a command */
+
+ case FAIL_SEND:
+ return FAIL_SEND;
+
+ /* Failure after reading a response */
+
+ case FAIL:
+ {
+ uschar * logmsg = NULL;
+
+ if (errno != 0 || sx->buffer[0] != '5') return FAIL;
+#ifndef DISABLE_EVENT
+ {
+ uschar * save_name = sender_host_authenticated;
+ sender_host_authenticated = au->name;
+ if ((logmsg = event_raise(sx->conn_args.tblock->event_action, US"auth:fail",
+ sx->buffer, NULL)))
+ log_write(0, LOG_MAIN, "%s", logmsg);
+ sender_host_authenticated = save_name;
+ }
+#endif
+ if (!logmsg)
+ log_write(0, LOG_MAIN, "%s authenticator failed H=%s [%s] %s",
+ au->name, host->name, host->address, sx->buffer);
+ break;
}
- (void)check_response(host, &errno, 0, buffer, &code, &msg, &pass_message);
- DEBUG(D_transport) debug_printf("%s\nerror for DATA ignored: pipelining "
- "is in use and there were no good recipients\n", msg);
- }
-/* All responses read and handled; MAIL (if present) received 2xx and DATA (if
-present) received 3xx. If any RCPTs were handled and yielded anything other
-than 4xx, yield will be set non-zero. */
+ /* Failure by some other means. In effect, the authenticator
+ decided it wasn't prepared to handle this case. Typically this
+ is the result of "fail" in an expansion string. Do we need to
+ log anything here? Feb 2006: a message is now put in the buffer
+ if logging is required. */
+
+ case CANCELLED:
+ if (*sx->buffer != 0)
+ log_write(0, LOG_MAIN, "%s authenticator cancelled "
+ "authentication H=%s [%s] %s", au->name, host->name,
+ host->address, sx->buffer);
+ break;
-return yield;
+ /* Internal problem, message in buffer. */
+
+ case ERROR:
+ set_errno_nohost(sx->addrlist, ERRNO_AUTHPROB, string_copy(sx->buffer),
+ DEFER, FALSE, &sx->delivery_start);
+ return ERROR;
+ }
+return OK;
}
-/* Do the client side of smtp-level authentication */
-/*
+
+/* Do the client side of smtp-level authentication.
+
Arguments:
- buffer EHLO response from server (gets overwritten)
- addrlist chain of potential addresses to deliver
- host host to deliver to
- ob transport options
- ibp, obp comms channel control blocks
+ sx smtp connection context
+
+sx->buffer should have the EHLO response from server (gets overwritten)
Returns:
OK Success, or failed (but not required): global "smtp_authenticated" set
FAIL - response
*/
-int
-smtp_auth(uschar *buffer, unsigned bufsize, address_item *addrlist, host_item *host,
- smtp_transport_options_block *ob, BOOL is_esmtp,
- smtp_inblock *ibp, smtp_outblock *obp)
+static int
+smtp_auth(smtp_context * sx)
{
-int require_auth;
-uschar *fail_reason = US"server did not advertise AUTH support";
+host_item * host = sx->conn_args.host; /* host to deliver to */
+smtp_transport_options_block * ob = sx->conn_args.ob; /* transport options */
+int require_auth = verify_check_given_host(CUSS &ob->hosts_require_auth, host);
+#ifndef DISABLE_PIPE_CONNECT
+unsigned short authbits = tls_out.active.sock >= 0
+ ? sx->ehlo_resp.crypted_auths : sx->ehlo_resp.cleartext_auths;
+#endif
+uschar * fail_reason = US"server did not advertise AUTH support";
-smtp_authenticated = FALSE;
+f.smtp_authenticated = FALSE;
client_authenticator = client_authenticated_id = client_authenticated_sender = NULL;
-require_auth = verify_check_given_host(&ob->hosts_require_auth, host);
-if (is_esmtp && !regex_AUTH) regex_AUTH =
- regex_must_compile(US"\\n250[\\s\\-]AUTH\\s+([\\-\\w\\s]+)(?:\\n|$)",
- FALSE, TRUE);
+if (!regex_AUTH)
+ regex_AUTH = regex_must_compile(AUTHS_REGEX, MCS_NOFLAGS, TRUE);
-if (is_esmtp && regex_match_and_setup(regex_AUTH, buffer, 0, -1))
+/* Is the server offering AUTH? */
+
+if ( sx->esmtp
+ &&
+#ifndef DISABLE_PIPE_CONNECT
+ sx->early_pipe_active ? authbits
+ :
+#endif
+ regex_match_and_setup(regex_AUTH, sx->buffer, 0, -1)
+ )
{
- uschar *names = string_copyn(expand_nstring[1], expand_nlength[1]);
+ uschar * names = NULL;
expand_nmax = -1; /* reset */
+#ifndef DISABLE_PIPE_CONNECT
+ if (!sx->early_pipe_active)
+#endif
+ names = string_copyn(expand_nstring[1], expand_nlength[1]);
+
/* Must not do this check until after we have saved the result of the
- regex match above. */
+ regex match above as the check could be another RE. */
- if (require_auth == OK ||
- verify_check_given_host(&ob->hosts_try_auth, host) == OK)
+ if ( require_auth == OK
+ || verify_check_given_host(CUSS &ob->hosts_try_auth, host) == OK)
{
- auth_instance *au;
+ DEBUG(D_transport) debug_printf("scanning authentication mechanisms\n");
fail_reason = US"no common mechanisms were found";
- DEBUG(D_transport) debug_printf("scanning authentication mechanisms\n");
+#ifndef DISABLE_PIPE_CONNECT
+ if (sx->early_pipe_active)
+ {
+ /* Scan our authenticators (which support use by a client and were offered
+ by the server (checked at cache-write time)), not suppressed by
+ client_condition. If one is found, attempt to authenticate by calling its
+ client function. We are limited to supporting up to 16 authenticator
+ public-names by the number of bits in a short. */
+
+ auth_instance * au;
+ uschar bitnum;
+ int rc;
+
+ for (bitnum = 0, au = auths;
+ !f.smtp_authenticated && au && bitnum < 16;
+ bitnum++, au = au->next) if (authbits & BIT(bitnum))
+ {
+ if ( au->client_condition
+ && !expand_check_condition(au->client_condition, au->name,
+ US"client authenticator"))
+ {
+ DEBUG(D_transport) debug_printf("skipping %s authenticator: %s\n",
+ au->name, "client_condition is false");
+ continue;
+ }
+
+ /* Found data for a listed mechanism. Call its client entry. Set
+ a flag in the outblock so that data is overwritten after sending so
+ that reflections don't show it. */
+
+ fail_reason = US"authentication attempt(s) failed";
+
+ if ((rc = try_authenticator(sx, au)) != OK)
+ return rc;
+ }
+ }
+ else
+#endif
/* Scan the configured authenticators looking for one which is configured
for use as a client, which is not suppressed by client_condition, and
If one is found, attempt to authenticate by calling its client function.
*/
- for (au = auths; !smtp_authenticated && au != NULL; au = au->next)
+ for (auth_instance * au = auths; !f.smtp_authenticated && au; au = au->next)
{
uschar *p = names;
- if (!au->client ||
- (au->client_condition != NULL &&
- !expand_check_condition(au->client_condition, au->name,
- US"client authenticator")))
+
+ if ( !au->client
+ || ( au->client_condition
+ && !expand_check_condition(au->client_condition, au->name,
+ US"client authenticator")))
{
DEBUG(D_transport) debug_printf("skipping %s authenticator: %s\n",
au->name,
/* Loop to scan supported server mechanisms */
- while (*p != 0)
+ while (*p)
{
- int rc;
int len = Ustrlen(au->public_name);
+ int rc;
+
while (isspace(*p)) p++;
if (strncmpic(au->public_name, p, len) != 0 ||
that reflections don't show it. */
fail_reason = US"authentication attempt(s) failed";
- obp->authenticating = TRUE;
- rc = (au->info->clientcode)(au, ibp, obp,
- ob->command_timeout, buffer, bufsize);
- obp->authenticating = FALSE;
- DEBUG(D_transport) debug_printf("%s authenticator yielded %d\n",
- au->name, rc);
-
- /* A temporary authentication failure must hold up delivery to
- this host. After a permanent authentication failure, we carry on
- to try other authentication methods. If all fail hard, try to
- deliver the message unauthenticated unless require_auth was set. */
-
- switch(rc)
- {
- case OK:
- smtp_authenticated = TRUE; /* stops the outer loop */
- client_authenticator = au->name;
- if (au->set_client_id != NULL)
- client_authenticated_id = expand_string(au->set_client_id);
- break;
-
- /* Failure after writing a command */
-
- case FAIL_SEND:
- return FAIL_SEND;
-
- /* Failure after reading a response */
-
- case FAIL:
- if (errno != 0 || buffer[0] != '5') return FAIL;
- log_write(0, LOG_MAIN, "%s authenticator failed H=%s [%s] %s",
- au->name, host->name, host->address, buffer);
- break;
-
- /* Failure by some other means. In effect, the authenticator
- decided it wasn't prepared to handle this case. Typically this
- is the result of "fail" in an expansion string. Do we need to
- log anything here? Feb 2006: a message is now put in the buffer
- if logging is required. */
-
- case CANCELLED:
- if (*buffer != 0)
- log_write(0, LOG_MAIN, "%s authenticator cancelled "
- "authentication H=%s [%s] %s", au->name, host->name,
- host->address, buffer);
- break;
- /* Internal problem, message in buffer. */
-
- case ERROR:
- set_errno_nohost(addrlist, ERRNO_AUTHPROB, string_copy(buffer),
- DEFER, FALSE);
- return ERROR;
- }
+ if ((rc = try_authenticator(sx, au)) != OK)
+ return rc;
break; /* If not authenticated, try next authenticator */
} /* Loop for scanning supported server mechanisms */
/* If we haven't authenticated, but are required to, give up. */
-if (require_auth == OK && !smtp_authenticated)
+if (require_auth == OK && !f.smtp_authenticated)
{
- set_errno_nohost(addrlist, ERRNO_AUTHFAIL,
+#ifndef DISABLE_PIPE_CONNECT
+ invalidate_ehlo_cache_entry(sx);
+#endif
+ set_errno_nohost(sx->addrlist, ERRNO_AUTHFAIL,
string_sprintf("authentication required but %s", fail_reason), DEFER,
- FALSE);
+ FALSE, &sx->delivery_start);
return DEFER;
}
/* Construct AUTH appendix string for MAIL TO */
/*
Arguments
- buffer to build string
+ sx context for smtp connection
+ p point in sx->buffer to build string
addrlist chain of potential addresses to deliver
- ob transport options
-Globals smtp_authenticated
+Globals f.smtp_authenticated
client_authenticated_sender
Return True on error, otherwise buffer has (possibly empty) terminated string
*/
-BOOL
-smtp_mail_auth_str(uschar *buffer, unsigned bufsize, address_item *addrlist,
- smtp_transport_options_block *ob)
+static BOOL
+smtp_mail_auth_str(smtp_context * sx, uschar * p, address_item * addrlist)
{
-uschar *local_authenticated_sender = authenticated_sender;
+smtp_transport_options_block * ob = sx->conn_args.ob;
+uschar * local_authenticated_sender = authenticated_sender;
#ifdef notdef
- debug_printf("smtp_mail_auth_str: as<%s> os<%s> SA<%s>\n", authenticated_sender, ob->authenticated_sender, smtp_authenticated?"Y":"N");
+ debug_printf("smtp_mail_auth_str: as<%s> os<%s> SA<%s>\n",
+ authenticated_sender, ob->authenticated_sender, f.smtp_authenticated?"Y":"N");
#endif
-if (ob->authenticated_sender != NULL)
+if (ob->authenticated_sender)
{
- uschar *new = expand_string(ob->authenticated_sender);
- if (new == NULL)
+ uschar * new = expand_string(ob->authenticated_sender);
+ if (!new)
{
- if (!expand_string_forcedfail)
+ if (!f.expand_string_forcedfail)
{
uschar *message = string_sprintf("failed to expand "
"authenticated_sender: %s", expand_string_message);
- set_errno_nohost(addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE);
+ set_errno_nohost(addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE, &sx->delivery_start);
return TRUE;
}
}
- else if (new[0] != 0) local_authenticated_sender = new;
+ else if (*new)
+ local_authenticated_sender = new;
}
/* Add the authenticated sender address if present */
-if ((smtp_authenticated || ob->authenticated_sender_force) &&
- local_authenticated_sender != NULL)
+if ( (f.smtp_authenticated || ob->authenticated_sender_force)
+ && local_authenticated_sender)
{
- string_format(buffer, bufsize, " AUTH=%s",
+ string_format_nt(p, sizeof(sx->buffer) - (p-sx->buffer), " AUTH=%s",
auth_xtextencode(local_authenticated_sender,
- Ustrlen(local_authenticated_sender)));
+ Ustrlen(local_authenticated_sender)));
client_authenticated_sender = string_copy(local_authenticated_sender);
}
else
- *buffer= 0;
+ *p = 0;
return FALSE;
}
-#ifdef EXPERIMENTAL_DANE
-/* Lookup TLSA record for host/port.
-Return: OK success with dnssec; DANE mode
- DEFER Do not use this host now, may retry later
- FAIL_FORCED No TLSA record; DANE not usable
- FAIL Do not use this connection
-*/
-
-int
-tlsa_lookup(const host_item * host, dns_answer * dnsa, BOOL dane_required)
-{
-/* move this out to host.c given the similarity to dns_lookup() ? */
-uschar buffer[300];
-const uschar * fullname = buffer;
-
-/* TLSA lookup string */
-(void)sprintf(CS buffer, "_%d._tcp.%.256s", host->port, host->name);
-
-switch (dns_lookup(dnsa, buffer, T_TLSA, &fullname))
- {
- case DNS_SUCCEED:
- if (!dns_is_secure(dnsa))
- {
- log_write(0, LOG_MAIN, "DANE error: TLSA lookup not DNSSEC");
- return DEFER;
- }
- return OK;
-
- case DNS_AGAIN:
- return DEFER; /* just defer this TLS'd conn */
-
- case DNS_NOMATCH:
- return dane_required ? FAIL : FAIL_FORCED;
-
- default:
- case DNS_FAIL:
- return dane_required ? FAIL : DEFER;
- }
-}
-#endif
-
-
-
typedef struct smtp_compare_s
{
- uschar *current_sender_address;
- struct transport_instance *tblock;
+ uschar * current_sender_address;
+ struct transport_instance * tblock;
} smtp_compare_t;
-/*
-Create a unique string that identifies this message, it is based on
-sender_address, helo_data and tls_certificate if enabled. */
+
+/* Create a unique string that identifies this message, it is based on
+sender_address, helo_data and tls_certificate if enabled.
+*/
static uschar *
smtp_local_identity(uschar * sender, struct transport_instance * tblock)
address_item * addr1;
uschar * if1 = US"";
uschar * helo1 = US"";
-#ifdef SUPPORT_TLS
+#ifndef DISABLE_TLS
uschar * tlsc1 = US"";
#endif
uschar * save_sender_address = sender_address;
uschar * local_identity = NULL;
-smtp_transport_options_block * ob =
- (smtp_transport_options_block *)tblock->options_block;
+smtp_transport_options_block * ob = SOB tblock->options_block;
sender_address = sender;
if (ob->helo_data)
helo1 = expand_string(ob->helo_data);
-#ifdef SUPPORT_TLS
+#ifndef DISABLE_TLS
if (ob->tls_certificate)
tlsc1 = expand_string(ob->tls_certificate);
local_identity = string_sprintf ("%s^%s^%s", if1, helo1, tlsc1);
current_local_identity =
smtp_local_identity(s_compare->current_sender_address, s_compare->tblock);
-if (!(new_sender_address = deliver_get_sender_address(message_id)))
- return 0;
+if (!(new_sender_address = spool_sender_from_msgid(message_id)))
+ return FALSE;
+
message_local_identity =
smtp_local_identity(new_sender_address, s_compare->tblock);
-uschar
-ehlo_response(uschar * buf, size_t bsize, uschar checks)
+static unsigned
+ehlo_response(uschar * buf, unsigned checks)
{
-#ifdef SUPPORT_TLS
-if (checks & PEER_OFFERED_TLS)
- if (pcre_exec(regex_STARTTLS, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_TLS;
+PCRE2_SIZE bsize = Ustrlen(buf);
+pcre2_match_data * md = pcre2_match_data_create(1, pcre_gen_ctx);
+
+/* debug_printf("%s: check for 0x%04x\n", __FUNCTION__, checks); */
+
+#ifndef DISABLE_TLS
+if ( checks & OPTION_TLS
+ && pcre2_match(regex_STARTTLS,
+ (PCRE2_SPTR)buf, bsize, 0, PCRE_EOPT, md, pcre_gen_mtc_ctx) < 0)
#endif
+ checks &= ~OPTION_TLS;
+
+if ( checks & OPTION_IGNQ
+ && pcre2_match(regex_IGNOREQUOTA,
+ (PCRE2_SPTR)buf, bsize, 0, PCRE_EOPT, md, pcre_gen_mtc_ctx) < 0)
+ checks &= ~OPTION_IGNQ;
- if ( checks & PEER_OFFERED_IGNQ
- && pcre_exec(regex_IGNOREQUOTA, NULL, CS buf, bsize, 0,
- PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_IGNQ;
+if ( checks & OPTION_CHUNKING
+ && pcre2_match(regex_CHUNKING,
+ (PCRE2_SPTR)buf, bsize, 0, PCRE_EOPT, md, pcre_gen_mtc_ctx) < 0)
+ checks &= ~OPTION_CHUNKING;
#ifndef DISABLE_PRDR
- if ( checks & PEER_OFFERED_PRDR
- && pcre_exec(regex_PRDR, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_PRDR;
+if ( checks & OPTION_PRDR
+ && pcre2_match(regex_PRDR,
+ (PCRE2_SPTR)buf, bsize, 0, PCRE_EOPT, md, pcre_gen_mtc_ctx) < 0)
#endif
+ checks &= ~OPTION_PRDR;
#ifdef SUPPORT_I18N
- if ( checks & PEER_OFFERED_UTF8
- && pcre_exec(regex_UTF8, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_UTF8;
+if ( checks & OPTION_UTF8
+ && pcre2_match(regex_UTF8,
+ (PCRE2_SPTR)buf, bsize, 0, PCRE_EOPT, md, pcre_gen_mtc_ctx) < 0)
#endif
+ checks &= ~OPTION_UTF8;
+
+if ( checks & OPTION_DSN
+ && pcre2_match(regex_DSN,
+ (PCRE2_SPTR)buf, bsize, 0, PCRE_EOPT, md, pcre_gen_mtc_ctx) < 0)
+ checks &= ~OPTION_DSN;
+
+if ( checks & OPTION_PIPE
+ && pcre2_match(regex_PIPELINING,
+ (PCRE2_SPTR)buf, bsize, 0, PCRE_EOPT, md, pcre_gen_mtc_ctx) < 0)
+ checks &= ~OPTION_PIPE;
+
+if ( checks & OPTION_SIZE
+ && pcre2_match(regex_SIZE,
+ (PCRE2_SPTR)buf, bsize, 0, PCRE_EOPT, md, pcre_gen_mtc_ctx) < 0)
+ checks &= ~OPTION_SIZE;
+
+#ifndef DISABLE_PIPE_CONNECT
+if ( checks & OPTION_EARLY_PIPE
+ && pcre2_match(regex_EARLY_PIPE,
+ (PCRE2_SPTR)buf, bsize, 0, PCRE_EOPT, md, pcre_gen_mtc_ctx) < 0)
+#endif
+ checks &= ~OPTION_EARLY_PIPE;
+
+/* pcre2_match_data_free(md); gen ctx needs no free */
+/* debug_printf("%s: found 0x%04x\n", __FUNCTION__, checks); */
+return checks;
+}
- if ( checks & PEER_OFFERED_DSN
- && pcre_exec(regex_DSN, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_DSN;
- if ( checks & PEER_OFFERED_PIPE
- && pcre_exec(regex_PIPELINING, NULL, CS buf, bsize, 0,
- PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_PIPE;
- if ( checks & PEER_OFFERED_SIZE
- && pcre_exec(regex_SIZE, NULL, CS buf, bsize, 0, PCRE_EOPT, NULL, 0) < 0)
- checks &= ~PEER_OFFERED_SIZE;
+/* Callback for emitting a BDAT data chunk header.
-return checks;
+If given a nonzero size, first flush any buffered SMTP commands
+then emit the command.
+
+Reap previous SMTP command responses if requested, and always reap
+the response from a previous BDAT command.
+
+Args:
+ tctx transport context
+ chunk_size value for SMTP BDAT command
+ flags
+ tc_chunk_last add LAST option to SMTP BDAT command
+ tc_reap_prev reap response to previous SMTP commands
+
+Returns:
+ OK or ERROR
+ DEFER TLS error on first read (EHLO-resp); errno set
+*/
+
+static int
+smtp_chunk_cmd_callback(transport_ctx * tctx, unsigned chunk_size,
+ unsigned flags)
+{
+smtp_transport_options_block * ob = SOB tctx->tblock->options_block;
+smtp_context * sx = tctx->smtp_context;
+int cmd_count = 0;
+int prev_cmd_count;
+
+/* Write SMTP chunk header command. If not reaping responses, note that
+there may be more writes (like, the chunk data) done soon. */
+
+if (chunk_size > 0)
+ {
+#ifndef DISABLE_PIPE_CONNECT
+ BOOL new_conn = !!(sx->outblock.conn_args);
+#endif
+ if((cmd_count = smtp_write_command(sx,
+ flags & tc_reap_prev ? SCMD_FLUSH : SCMD_MORE,
+ "BDAT %u%s\r\n", chunk_size, flags & tc_chunk_last ? " LAST" : "")
+ ) < 0) return ERROR;
+ if (flags & tc_chunk_last)
+ data_command = string_copy(big_buffer); /* Save for later error message */
+#ifndef DISABLE_PIPE_CONNECT
+ /* That command write could have been the one that made the connection.
+ Copy the fd from the client conn ctx (smtp transport specific) to the
+ generic transport ctx. */
+
+ if (new_conn)
+ tctx->u.fd = sx->outblock.cctx->sock;
+#endif
+ }
+
+prev_cmd_count = cmd_count += sx->cmd_count;
+
+/* Reap responses for any previous, but not one we just emitted */
+
+if (chunk_size > 0)
+ prev_cmd_count--;
+if (sx->pending_BDAT)
+ prev_cmd_count--;
+
+if (flags & tc_reap_prev && prev_cmd_count > 0)
+ {
+ DEBUG(D_transport) debug_printf("look for %d responses"
+ " for previous pipelined cmds\n", prev_cmd_count);
+
+ switch(sync_responses(sx, prev_cmd_count, 0))
+ {
+ case 1: /* 2xx (only) => OK */
+ case 3: sx->good_RCPT = TRUE; /* 2xx & 5xx => OK & progress made */
+ case 2: sx->completed_addr = TRUE; /* 5xx (only) => progress made */
+ case 0: break; /* No 2xx or 5xx, but no probs */
+
+ case -5: errno = ERRNO_TLSFAILURE;
+ return DEFER;
+#ifndef DISABLE_PIPE_CONNECT
+ case -4: /* non-2xx for pipelined banner or EHLO */
+#endif
+ case -1: /* Timeout on RCPT */
+ default: return ERROR; /* I/O error, or any MAIL/DATA error */
+ }
+ cmd_count = 1;
+ if (!sx->pending_BDAT)
+ pipelining_active = FALSE;
+ }
+
+/* Reap response for an outstanding BDAT */
+
+if (sx->pending_BDAT)
+ {
+ DEBUG(D_transport) debug_printf("look for one response for BDAT\n");
+
+ if (!smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2',
+ ob->command_timeout))
+ {
+ if (errno == 0 && sx->buffer[0] == '4')
+ {
+ errno = ERRNO_DATA4XX; /*XXX does this actually get used? */
+ sx->addrlist->more_errno |=
+ ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
+ }
+ return ERROR;
+ }
+ cmd_count--;
+ sx->pending_BDAT = FALSE;
+ pipelining_active = FALSE;
+ }
+else if (chunk_size > 0)
+ sx->pending_BDAT = TRUE;
+
+
+sx->cmd_count = cmd_count;
+return OK;
}
-/*************************************************
-* Deliver address list to given host *
-*************************************************/
-/* If continue_hostname is not null, we get here only when continuing to
-deliver down an existing channel. The channel was passed as the standard
-input. TLS is never active on a passed channel; the previous process always
-closes it down before passing the connection on.
+#ifdef SUPPORT_DANE
+static int
+check_force_dane_conn(smtp_context * sx, smtp_transport_options_block * ob)
+{
+int rc;
+if( sx->dane_required
+ || verify_check_given_host(CUSS &ob->hosts_try_dane, sx->conn_args.host) == OK
+ )
+ switch (rc = tlsa_lookup(sx->conn_args.host, &sx->conn_args.tlsa_dnsa, sx->dane_required))
+ {
+ case OK: sx->conn_args.dane = TRUE;
+ ob->tls_tempfail_tryclear = FALSE; /* force TLS */
+ ob->tls_sni = sx->conn_args.host->name; /* force SNI */
+ break;
+ case FAIL_FORCED: break;
+ default: set_errno_nohost(sx->addrlist, ERRNO_DNSDEFER,
+ string_sprintf("DANE error: tlsa lookup %s",
+ rc_to_string(rc)),
+ rc, FALSE, &sx->delivery_start);
+# ifndef DISABLE_EVENT
+ (void) event_raise(sx->conn_args.tblock->event_action,
+ US"dane:fail", sx->dane_required
+ ? US"dane-required" : US"dnssec-invalid",
+ NULL);
+# endif
+ return rc;
+ }
+return OK;
+}
+#endif
-Otherwise, we have to make a connection to the remote host, and do the
-initial protocol exchange.
-When running as an MUA wrapper, if the sender or any recipient is rejected,
-temporarily or permanently, we force failure for all recipients.
+/*************************************************
+* Make connection for given message *
+*************************************************/
+/*
Arguments:
- addrlist chain of potential addresses to deliver; only those whose
- transport_return field is set to PENDING_DEFER are currently
- being processed; others should be skipped - they have either
- been delivered to an earlier host or IP address, or been
- failed by one of them.
- host host to deliver to
- host_af AF_INET or AF_INET6
- port default TCP/IP port to use, in host byte order
- interface interface to bind to, or NULL
- tblock transport instance block
- message_defer set TRUE if yield is OK, but all addresses were deferred
- because of a non-recipient, non-host failure, that is, a
- 4xx response to MAIL FROM, DATA, or ".". This is a defer
- that is specific to the message.
+ sx connection context
suppress_tls if TRUE, don't attempt a TLS connection - this is set for
a second attempt after TLS initialization fails
Returns: OK - the connection was made and the delivery attempted;
- the result for each address is in its data block.
+ fd is set in the conn context, tls_out set up.
DEFER - the connection could not be made, or something failed
while setting up the SMTP session, or there was a
non-message-specific error, such as a timeout.
- ERROR - a filter command is specified for this transport,
- and there was a problem setting it up; OR helo_data
- or add_headers or authenticated_sender is specified
- for this transport, and the string failed to expand
+ ERROR - helo_data or add_headers or authenticated_sender is
+ specified for this transport, and the string failed
+ to expand
*/
-
-static int
-smtp_deliver(address_item *addrlist, host_item *host, int host_af, int port,
- uschar *interface, transport_instance *tblock,
- BOOL *message_defer, BOOL suppress_tls)
+int
+smtp_setup_conn(smtp_context * sx, BOOL suppress_tls)
{
-address_item *addr;
-address_item *sync_addr;
-address_item *first_addr = addrlist;
-int yield = OK;
-int address_count;
-int save_errno;
-int rc;
-time_t start_delivery_time = time(NULL);
-smtp_transport_options_block *ob =
- (smtp_transport_options_block *)(tblock->options_block);
-BOOL lmtp = strcmpic(ob->protocol, US"lmtp") == 0;
-BOOL smtps = strcmpic(ob->protocol, US"smtps") == 0;
-BOOL ok = FALSE;
-BOOL send_rset = TRUE;
-BOOL send_quit = TRUE;
-BOOL setting_up = TRUE;
-BOOL completed_address = FALSE;
-BOOL esmtp = TRUE;
-BOOL pending_MAIL;
+smtp_transport_options_block * ob = sx->conn_args.tblock->options_block;
BOOL pass_message = FALSE;
-uschar peer_offered = 0; /*XXX should this be handed on cf. tls_offered, smtp_use_dsn ? */
-#ifndef DISABLE_PRDR
-BOOL prdr_active;
-#endif
-#ifdef SUPPORT_I18N
-BOOL utf8_needed = FALSE;
-#endif
-BOOL dsn_all_lasthop = TRUE;
-#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
-BOOL dane = FALSE;
-BOOL dane_required = verify_check_given_host(&ob->hosts_require_dane, host) == OK;
-dns_answer tlsa_dnsa;
+uschar * message = NULL;
+int yield = OK;
+#ifndef DISABLE_TLS
+uschar * tls_errstr;
#endif
-smtp_inblock inblock;
-smtp_outblock outblock;
-int max_rcpt = tblock->max_addresses;
-uschar *igquotstr = US"";
-#ifdef EXPERIMENTAL_DSN_INFO
-uschar *smtp_greeting = NULL;
-uschar *helo_response = NULL;
+/* Many lines of clearing individual elements of *sx that used to
+be here have been replaced by a full memset to zero (de41aff051).
+There are two callers, this file and verify.c . Now we only set
+up nonzero elements. */
+
+sx->conn_args.ob = ob;
+
+sx->lmtp = strcmpic(ob->protocol, US"lmtp") == 0;
+sx->smtps = strcmpic(ob->protocol, US"smtps") == 0;
+sx->send_rset = TRUE;
+sx->send_quit = TRUE;
+sx->setting_up = TRUE;
+sx->esmtp = TRUE;
+sx->dsn_all_lasthop = TRUE;
+#ifdef SUPPORT_DANE
+sx->dane_required =
+ verify_check_given_host(CUSS &ob->hosts_require_dane, sx->conn_args.host) == OK;
#endif
-uschar *helo_data = NULL;
-
-uschar *message = NULL;
-uschar new_message_id[MESSAGE_ID_LENGTH + 1];
-uschar *p;
-uschar buffer[4096];
-uschar inbuffer[4096];
-uschar outbuffer[4096];
-suppress_tls = suppress_tls; /* stop compiler warning when no TLS support */
+if ((sx->max_mail = sx->conn_args.tblock->connection_max_messages) == 0) sx->max_mail = 999999;
+if ((sx->max_rcpt = sx->conn_args.tblock->max_addresses) == 0) sx->max_rcpt = 999999;
+sx->igquotstr = US"";
+if (!sx->helo_data) sx->helo_data = ob->helo_data;
-*message_defer = FALSE;
smtp_command = US"initial connection";
-if (max_rcpt == 0) max_rcpt = 999999;
/* Set up the buffer for reading SMTP response packets. */
-inblock.buffer = inbuffer;
-inblock.buffersize = sizeof(inbuffer);
-inblock.ptr = inbuffer;
-inblock.ptrend = inbuffer;
+sx->inblock.buffer = sx->inbuffer;
+sx->inblock.buffersize = sizeof(sx->inbuffer);
+sx->inblock.ptr = sx->inbuffer;
+sx->inblock.ptrend = sx->inbuffer;
/* Set up the buffer for holding SMTP commands while pipelining */
-outblock.buffer = outbuffer;
-outblock.buffersize = sizeof(outbuffer);
-outblock.ptr = outbuffer;
-outblock.cmd_count = 0;
-outblock.authenticating = FALSE;
+sx->outblock.buffer = sx->outbuffer;
+sx->outblock.buffersize = sizeof(sx->outbuffer);
+sx->outblock.ptr = sx->outbuffer;
/* Reset the parameters of a TLS session. */
tls_out.ourcert = NULL;
tls_out.peercert = NULL;
tls_out.peerdn = NULL;
-#if defined(SUPPORT_TLS) && !defined(USE_GNUTLS)
+#ifdef USE_OPENSSL
tls_out.sni = NULL;
#endif
tls_out.ocsp = OCSP_NOT_REQ;
+#ifndef DISABLE_TLS_RESUME
+tls_out.resumption = 0;
+#endif
+tls_out.ver = NULL;
/* Flip the legacy TLS-related variables over to the outbound set in case
they're used in the context of the transport. Don't bother resetting
-afterward as we're in a subprocess. */
+afterward (when being used by a transport) as we're in a subprocess.
+For verify, unflipped once the callout is dealt with */
tls_modify_variables(&tls_out);
-#ifndef SUPPORT_TLS
-if (smtps)
+#ifdef DISABLE_TLS
+if (sx->smtps)
{
- set_errno_nohost(addrlist, ERRNO_TLSFAILURE, US"TLS support not available",
- DEFER, FALSE);
+ set_errno_nohost(sx->addrlist, ERRNO_TLSFAILURE, US"TLS support not available",
+ DEFER, FALSE, &sx->delivery_start);
return ERROR;
}
-#endif
+#else
+
+/* If we have a proxied TLS connection, check usability for this message */
+
+if (continue_hostname && continue_proxy_cipher)
+ {
+ int rc;
+ const uschar * sni = US"";
+
+# ifdef SUPPORT_DANE
+ /* Check if the message will be DANE-verified; if so force TLS and its SNI */
+
+ tls_out.dane_verified = FALSE;
+ smtp_port_for_connect(sx->conn_args.host, sx->port);
+ if ( sx->conn_args.host->dnssec == DS_YES
+ && (rc = check_force_dane_conn(sx, ob)) != OK
+ )
+ return rc;
+# endif
+
+ /* If the SNI or the DANE status required for the new message differs from the
+ existing conn drop the connection to force a new one. */
+
+ if (ob->tls_sni && !(sni = expand_cstring(ob->tls_sni)))
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "<%s>: failed to expand transport's tls_sni value: %s",
+ sx->addrlist->address, expand_string_message);
+
+# ifdef SUPPORT_DANE
+ if ( (continue_proxy_sni ? (Ustrcmp(continue_proxy_sni, sni) == 0) : !*sni)
+ && continue_proxy_dane == sx->conn_args.dane)
+ {
+ tls_out.sni = US sni;
+ if ((tls_out.dane_verified = continue_proxy_dane))
+ sx->conn_args.host->dnssec = DS_YES;
+ }
+# else
+ if ((continue_proxy_sni ? (Ustrcmp(continue_proxy_sni, sni) == 0) : !*sni))
+ tls_out.sni = US sni;
+# endif
+ else
+ {
+ DEBUG(D_transport)
+ debug_printf("Closing proxied-TLS connection due to SNI mismatch\n");
+
+ smtp_debug_cmd(US"QUIT", 0);
+ write(0, "QUIT\r\n", 6);
+ close(0);
+ continue_hostname = continue_proxy_cipher = NULL;
+ f.continue_more = FALSE;
+ continue_sequence = 1; /* Unfortunately, this process cannot affect success log
+ which is done by delivery proc. Would have to pass this
+ back through reporting pipe. */
+ }
+ }
+#endif /*!DISABLE_TLS*/
/* Make a connection to the host if this isn't a continued delivery, and handle
the initial interaction and HELO/EHLO/LHLO. Connect timeout errors are handled
specially so they can be identified for retries. */
-if (continue_hostname == NULL)
+if (!continue_hostname)
{
- /* This puts port into host->port */
- inblock.sock = outblock.sock =
- smtp_connect(host, host_af, port, interface, ob->connect_timeout, tblock);
+ if (sx->verify)
+ HDEBUG(D_verify) debug_printf("interface=%s port=%d\n", sx->conn_args.interface, sx->port);
- if (inblock.sock < 0)
- {
- set_errno_nohost(addrlist, (errno == ETIMEDOUT)? ERRNO_CONNECTTIMEOUT : errno,
- NULL, DEFER, FALSE);
- return DEFER;
- }
+ /* Arrange to report to calling process this is a new connection */
-#if defined(SUPPORT_TLS) && defined(EXPERIMENTAL_DANE)
+ clearflag(sx->first_addr, af_cont_conn);
+ setflag(sx->first_addr, af_new_conn);
+
+ /* Get the actual port the connection will use, into sx->conn_args.host */
+
+ smtp_port_for_connect(sx->conn_args.host, sx->port);
+
+#ifdef SUPPORT_DANE
+ /* Do TLSA lookup for DANE */
{
tls_out.dane_verified = FALSE;
tls_out.tlsa_usage = 0;
- if (host->dnssec == DS_YES)
+ if (sx->conn_args.host->dnssec == DS_YES)
{
- if( dane_required
- || verify_check_given_host(&ob->hosts_try_dane, host) == OK
- )
- switch (rc = tlsa_lookup(host, &tlsa_dnsa, dane_required))
- {
- case OK: dane = TRUE; break;
- case FAIL_FORCED: break;
- default: set_errno_nohost(addrlist, ERRNO_DNSDEFER,
- string_sprintf("DANE error: tlsa lookup %s",
- rc == DEFER ? "DEFER" : "FAIL"),
- rc, FALSE);
- return rc;
- }
+ int rc;
+ if ((rc = check_force_dane_conn(sx, ob)) != OK)
+ return rc;
}
- else if (dane_required)
+ else if (sx->dane_required)
{
- set_errno_nohost(addrlist, ERRNO_DNSDEFER,
- string_sprintf("DANE error: %s lookup not DNSSEC", host->name),
- FAIL, FALSE);
+ set_errno_nohost(sx->addrlist, ERRNO_DNSDEFER,
+ string_sprintf("DANE error: %s lookup not DNSSEC", sx->conn_args.host->name),
+ FAIL, FALSE, &sx->delivery_start);
+# ifndef DISABLE_EVENT
+ (void) event_raise(sx->conn_args.tblock->event_action,
+ US"dane:fail", US"dane-required", NULL);
+# endif
return FAIL;
}
-
- if (dane)
- ob->tls_tempfail_tryclear = FALSE;
}
#endif /*DANE*/
+ /* Make the TCP connection */
+
+ sx->cctx.tls_ctx = NULL;
+ sx->inblock.cctx = sx->outblock.cctx = &sx->cctx;
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+ sx->peer_limit_mail = sx->peer_limit_rcpt = sx->peer_limit_rcptdom =
+#endif
+ sx->avoid_option = sx->peer_offered = smtp_peer_options = 0;
+#ifndef DISABLE_CLIENT_CMD_LOG
+ client_cmd_log = NULL;
+#endif
+
+#ifndef DISABLE_PIPE_CONNECT
+ if ( verify_check_given_host(CUSS &ob->hosts_pipe_connect,
+ sx->conn_args.host) == OK)
+
+ /* We don't find out the local ip address until the connect, so if
+ the helo string might use it avoid doing early-pipelining. */
+
+ if ( !sx->helo_data
+ || sx->conn_args.interface
+ || !Ustrstr(sx->helo_data, "$sending_ip_address")
+ || Ustrstr(sx->helo_data, "def:sending_ip_address")
+ )
+ {
+ sx->early_pipe_ok = TRUE;
+ if ( read_ehlo_cache_entry(sx)
+ && sx->ehlo_resp.cleartext_features & OPTION_EARLY_PIPE)
+ {
+ DEBUG(D_transport)
+ debug_printf("Using cached cleartext PIPECONNECT\n");
+ sx->early_pipe_active = TRUE;
+ sx->peer_offered = sx->ehlo_resp.cleartext_features;
+ }
+ }
+ else DEBUG(D_transport)
+ debug_printf("helo needs $sending_ip_address; avoid early-pipelining\n");
+
+PIPE_CONNECT_RETRY:
+ if (sx->early_pipe_active)
+ {
+ sx->outblock.conn_args = &sx->conn_args;
+ (void) smtp_boundsock(&sx->conn_args);
+ }
+ else
+#endif
+ {
+ blob lazy_conn = {.data = NULL};
+ /* For TLS-connect, a TFO lazy-connect is useful since the Client Hello
+ can go on the TCP SYN. */
+
+ if ((sx->cctx.sock = smtp_connect(&sx->conn_args,
+ sx->smtps ? &lazy_conn : NULL)) < 0)
+ {
+ set_errno_nohost(sx->addrlist,
+ errno == ETIMEDOUT ? ERRNO_CONNECTTIMEOUT : errno,
+ sx->verify ? US strerror(errno) : NULL,
+ DEFER, FALSE, &sx->delivery_start);
+ sx->send_quit = FALSE;
+ return DEFER;
+ }
+#ifdef TCP_QUICKACK
+ (void) setsockopt(sx->cctx.sock, IPPROTO_TCP, TCP_QUICKACK, US &off,
+ sizeof(off));
+#endif
+ }
/* Expand the greeting message while waiting for the initial response. (Makes
sense if helo_data contains ${lookup dnsdb ...} stuff). The expansion is
- delayed till here so that $sending_interface and $sending_port are set. */
+ delayed till here so that $sending_ip_address and $sending_port are set.
+ Those will be known even for a TFO lazy-connect, having been set by the bind().
+ For early-pipe, we are ok if binding to a local interface; otherwise (if
+ $sending_ip_address is seen in helo_data) we disabled early-pipe above. */
+
+ if (sx->helo_data)
+ if (!(sx->helo_data = expand_string(sx->helo_data)))
+ if (sx->verify)
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "<%s>: failed to expand transport's helo_data value for callout: %s",
+ sx->addrlist->address, expand_string_message);
- helo_data = expand_string(ob->helo_data);
#ifdef SUPPORT_I18N
- if (helo_data)
+ if (sx->helo_data)
{
- uschar * errstr = NULL;
- if ((helo_data = string_domain_utf8_to_alabel(helo_data, &errstr)), errstr)
- {
- errstr = string_sprintf("failed to expand helo_data: %s", errstr);
- set_errno_nohost(addrlist, ERRNO_EXPANDFAIL, errstr, DEFER, FALSE);
- yield = DEFER;
- goto SEND_QUIT;
- }
+ expand_string_message = NULL;
+ if ((sx->helo_data = string_domain_utf8_to_alabel(sx->helo_data,
+ &expand_string_message)),
+ expand_string_message)
+ if (sx->verify)
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "<%s>: failed to expand transport's helo_data value for callout: %s",
+ sx->addrlist->address, expand_string_message);
+ else
+ sx->helo_data = NULL;
}
#endif
is nevertheless a reasonably clean way of programming this kind of logic,
where you want to escape on any error. */
- if (!smtps)
+ if (!sx->smtps)
{
- BOOL good_response = smtp_read_response(&inblock, buffer, sizeof(buffer),
- '2', ob->command_timeout);
-#ifdef EXPERIMENTAL_DSN_INFO
- smtp_greeting = string_copy(buffer);
+#ifndef DISABLE_PIPE_CONNECT
+ if (sx->early_pipe_active)
+ {
+ sx->pending_BANNER = TRUE; /* sync_responses() must eventually handle */
+ sx->outblock.cmd_count = 1;
+ }
+ else
#endif
- if (!good_response) goto RESPONSE_FAILED;
+ {
+ if (!smtp_reap_banner(sx))
+ goto RESPONSE_FAILED;
+ }
#ifndef DISABLE_EVENT
{
uschar * s;
- lookup_dnssec_authenticated = host->dnssec==DS_YES ? US"yes"
- : host->dnssec==DS_NO ? US"no" : NULL;
- s = event_raise(tblock->event_action, US"smtp:connect", buffer);
+ lookup_dnssec_authenticated = sx->conn_args.host->dnssec==DS_YES ? US"yes"
+ : sx->conn_args.host->dnssec==DS_NO ? US"no" : NULL;
+ s = event_raise(sx->conn_args.tblock->event_action, US"smtp:connect", sx->buffer, NULL);
if (s)
{
- set_errno_nohost(addrlist, ERRNO_EXPANDFAIL,
+ set_errno_nohost(sx->addrlist, ERRNO_EXPANDFAIL,
string_sprintf("deferred by smtp:connect event expansion: %s", s),
- DEFER, FALSE);
+ DEFER, FALSE, &sx->delivery_start);
yield = DEFER;
goto SEND_QUIT;
}
/* Now check if the helo_data expansion went well, and sign off cleanly if
it didn't. */
- if (helo_data == NULL)
+ if (!sx->helo_data)
{
- uschar *message = string_sprintf("failed to expand helo_data: %s",
+ message = string_sprintf("failed to expand helo_data: %s",
expand_string_message);
- set_errno_nohost(addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE);
+ set_errno_nohost(sx->addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE, &sx->delivery_start);
yield = DEFER;
goto SEND_QUIT;
}
}
/** Debugging without sending a message
-addrlist->transport_return = DEFER;
+sx->addrlist->transport_return = DEFER;
goto SEND_QUIT;
**/
mailers use upper case for some reason (the RFC is quite clear about case
independence) so, for peace of mind, I gave in. */
- esmtp = verify_check_given_host(&ob->hosts_avoid_esmtp, host) != OK;
+ sx->esmtp = verify_check_given_host(CUSS &ob->hosts_avoid_esmtp, sx->conn_args.host) != OK;
/* Alas; be careful, since this goto is not an error-out, so conceivably
we might set data between here and the target which we assume to exist
and be usable. I can see this coming back to bite us. */
-#ifdef SUPPORT_TLS
- if (smtps)
+#ifndef DISABLE_TLS
+ if (sx->smtps)
{
- tls_offered = TRUE;
+ smtp_peer_options |= OPTION_TLS;
suppress_tls = FALSE;
ob->tls_tempfail_tryclear = FALSE;
smtp_command = US"SSL-on-connect";
}
#endif
- if (esmtp)
+ if (sx->esmtp)
{
- if (smtp_write_command(&outblock, FALSE, "%s %s\r\n",
- lmtp? "LHLO" : "EHLO", helo_data) < 0)
+ if (smtp_write_command(sx,
+#ifndef DISABLE_PIPE_CONNECT
+ sx->early_pipe_active ? SCMD_BUFFER :
+#endif
+ SCMD_FLUSH,
+ "%s %s\r\n", sx->lmtp ? "LHLO" : "EHLO", sx->helo_data) < 0)
goto SEND_FAILED;
- if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
- ob->command_timeout))
+ sx->esmtp_sent = TRUE;
+
+#ifndef DISABLE_PIPE_CONNECT
+ if (sx->early_pipe_active)
{
- if (errno != 0 || buffer[0] == 0 || lmtp)
+ sx->pending_EHLO = TRUE;
+
+ /* If we have too many authenticators to handle and might need to AUTH
+ for this transport, pipeline no further as we will need the
+ list of auth methods offered. Reap the banner and EHLO. */
+
+ if ( (ob->hosts_require_auth || ob->hosts_try_auth)
+ && f.smtp_in_early_pipe_no_auth)
{
-#ifdef EXPERIMENTAL_DSN_INFO
- helo_response = string_copy(buffer);
-#endif
- goto RESPONSE_FAILED;
+ DEBUG(D_transport) debug_printf("may need to auth, so pipeline no further\n");
+ if (smtp_write_command(sx, SCMD_FLUSH, NULL) < 0)
+ goto SEND_FAILED;
+ if (sync_responses(sx, 2, 0) != 0)
+ {
+ HDEBUG(D_transport)
+ debug_printf("failed reaping pipelined cmd responses\n");
+ goto RESPONSE_FAILED;
+ }
+ sx->early_pipe_active = FALSE;
}
- esmtp = FALSE;
}
-#ifdef EXPERIMENTAL_DSN_INFO
- helo_response = string_copy(buffer);
+ else
#endif
+ if (!smtp_reap_ehlo(sx))
+ goto RESPONSE_FAILED;
}
else
- {
DEBUG(D_transport)
debug_printf("not sending EHLO (host matches hosts_avoid_esmtp)\n");
- }
- if (!esmtp)
- {
- BOOL good_response;
+#ifndef DISABLE_PIPE_CONNECT
+ if (!sx->early_pipe_active)
+#endif
+ if (!sx->esmtp)
+ {
+ BOOL good_response;
+ int n = sizeof(sx->buffer);
+ uschar * rsp = sx->buffer;
- if (smtp_write_command(&outblock, FALSE, "HELO %s\r\n", helo_data) < 0)
- goto SEND_FAILED;
- good_response = smtp_read_response(&inblock, buffer, sizeof(buffer),
- '2', ob->command_timeout);
+ if (sx->esmtp_sent && (n = Ustrlen(sx->buffer) + 1) < sizeof(sx->buffer)/2)
+ { rsp = sx->buffer + n; n = sizeof(sx->buffer) - n; }
+
+ if (smtp_write_command(sx, SCMD_FLUSH, "HELO %s\r\n", sx->helo_data) < 0)
+ goto SEND_FAILED;
+ good_response = smtp_read_response(sx, rsp, n, '2', ob->command_timeout);
#ifdef EXPERIMENTAL_DSN_INFO
- helo_response = string_copy(buffer);
+ sx->helo_response = string_copy(rsp);
#endif
- if (!good_response) goto RESPONSE_FAILED;
- }
+ if (!good_response)
+ {
+ /* Handle special logging for a closed connection after HELO
+ when had previously sent EHLO */
- if (esmtp || lmtp)
- peer_offered = ehlo_response(buffer, Ustrlen(buffer),
- PEER_OFFERED_TLS
- | 0 /* IGNQ checked later */
- | 0 /* PRDR checked later */
- | 0 /* UTF8 checked later */
- | 0 /* DSN checked later */
- | 0 /* PIPE checked later */
- | 0 /* SIZE checked later */
- );
+ if (rsp != sx->buffer && rsp[0] == 0 && (errno == 0 || errno == ECONNRESET))
+ {
+ errno = ERRNO_SMTPCLOSED;
+ goto EHLOHELO_FAILED;
+ }
+ memmove(sx->buffer, rsp, Ustrlen(rsp));
+ goto RESPONSE_FAILED;
+ }
+ }
+
+ if (sx->esmtp || sx->lmtp)
+ {
+#ifndef DISABLE_PIPE_CONNECT
+ if (!sx->early_pipe_active)
+#endif
+ {
+ sx->peer_offered = ehlo_response(sx->buffer,
+ OPTION_TLS /* others checked later */
+#ifndef DISABLE_PIPE_CONNECT
+ | (sx->early_pipe_ok
+ ? OPTION_IGNQ
+ | OPTION_CHUNKING | OPTION_PRDR | OPTION_DSN | OPTION_PIPE | OPTION_SIZE
+#ifdef SUPPORT_I18N
+ | OPTION_UTF8
+#endif
+ | OPTION_EARLY_PIPE
+ : 0
+ )
+#endif
+ );
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+ if (tls_out.active.sock >= 0 || !(sx->peer_offered & OPTION_TLS))
+ {
+ ehlo_response_limits_read(sx);
+ ehlo_response_limits_apply(sx);
+ }
+#endif
+#ifndef DISABLE_PIPE_CONNECT
+ if (sx->early_pipe_ok)
+ {
+ sx->ehlo_resp.cleartext_features = sx->peer_offered;
+
+ if ( (sx->peer_offered & (OPTION_PIPE | OPTION_EARLY_PIPE))
+ == (OPTION_PIPE | OPTION_EARLY_PIPE))
+ {
+ DEBUG(D_transport) debug_printf("PIPECONNECT usable in future for this IP\n");
+ sx->ehlo_resp.cleartext_auths = study_ehlo_auths(sx);
+ write_ehlo_cache_entry(sx);
+ }
+ }
+#endif
+ ehlo_response_lbserver(sx, ob);
+ }
/* Set tls_offered if the response to EHLO specifies support for STARTTLS. */
-#ifdef SUPPORT_TLS
- tls_offered = !!(peer_offered & PEER_OFFERED_TLS);
+#ifndef DISABLE_TLS
+ smtp_peer_options |= sx->peer_offered & OPTION_TLS;
#endif
+ }
}
-/* For continuing deliveries down the same channel, the socket is the standard
-input, and we don't need to redo EHLO here (but may need to do so for TLS - see
-below). Set up the pointer to where subsequent commands will be left, for
-error messages. Note that smtp_use_size and smtp_use_pipelining will have been
+/* For continuing deliveries down the same channel, having re-exec'd the socket
+is the standard input; for a socket held open from verify it is recorded
+in the cutthrough context block. Either way we don't need to redo EHLO here
+(but may need to do so for TLS - see below).
+Set up the pointer to where subsequent commands will be left, for
+error messages. Note that smtp_peer_options will have been
set from the command line if they were set in the process that passed the
connection on. */
/*XXX continue case needs to propagate DSN_INFO, prob. in deliver.c
-as the contine goes via transport_pass_socket() and doublefork and exec.
+as the continue goes via transport_pass_socket() and doublefork and exec.
It does not wait. Unclear how we keep separate host's responses
separate - we could match up by host ip+port as a bodge. */
else
{
- inblock.sock = outblock.sock = fileno(stdin);
+ if (cutthrough.cctx.sock >= 0 && cutthrough.callout_hold_only)
+ {
+ sx->cctx = cutthrough.cctx;
+ sx->conn_args.host->port = sx->port = cutthrough.host.port;
+ }
+ else
+ {
+ sx->cctx.sock = 0; /* stdin */
+ sx->cctx.tls_ctx = NULL;
+ smtp_port_for_connect(sx->conn_args.host, sx->port); /* Record the port that was used */
+ }
+ sx->inblock.cctx = sx->outblock.cctx = &sx->cctx;
smtp_command = big_buffer;
- host->port = port; /* Record the port that was used */
+ sx->peer_offered = smtp_peer_options;
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+ /* Limits passed by cmdline over exec. */
+ ehlo_limits_apply(sx,
+ sx->peer_limit_mail = continue_limit_mail,
+ sx->peer_limit_rcpt = continue_limit_rcpt,
+ sx->peer_limit_rcptdom = continue_limit_rcptdom);
+#endif
+ sx->helo_data = NULL; /* ensure we re-expand ob->helo_data */
+
+ /* For a continued connection with TLS being proxied for us, or a
+ held-open verify connection with TLS, nothing more to do. */
+
+ if ( continue_proxy_cipher
+ || (cutthrough.cctx.sock >= 0 && cutthrough.callout_hold_only
+ && cutthrough.is_tls)
+ )
+ {
+ sx->pipelining_used = pipelining_active = !!(smtp_peer_options & OPTION_PIPE);
+ HDEBUG(D_transport) debug_printf("continued connection, %s TLS\n",
+ continue_proxy_cipher ? "proxied" : "verify conn with");
+ return OK;
+ }
+ HDEBUG(D_transport) debug_printf("continued connection, no TLS\n");
}
/* If TLS is available on this connection, whether continued or not, attempt to
the client not be required to use TLS. If the response is bad, copy the buffer
for error analysis. */
-#ifdef SUPPORT_TLS
-if ( tls_offered
+#ifndef DISABLE_TLS
+if ( smtp_peer_options & OPTION_TLS
&& !suppress_tls
- && verify_check_given_host(&ob->hosts_avoid_tls, host) != OK)
+ && verify_check_given_host(CUSS &ob->hosts_avoid_tls, sx->conn_args.host) != OK
+ && ( !sx->verify
+ || verify_check_given_host(CUSS &ob->hosts_verify_avoid_tls, sx->conn_args.host) != OK
+ ) )
{
uschar buffer2[4096];
- if (smtp_write_command(&outblock, FALSE, "STARTTLS\r\n") < 0)
+
+ if (smtp_write_command(sx, SCMD_FLUSH, "STARTTLS\r\n") < 0)
goto SEND_FAILED;
+#ifndef DISABLE_PIPE_CONNECT
+ /* If doing early-pipelining reap the banner and EHLO-response but leave
+ the response for the STARTTLS we just sent alone. On fail, assume wrong
+ cached capability and retry with the pipelining disabled. */
+
+ if (sx->early_pipe_active)
+ {
+ if (sync_responses(sx, 2, 0) != 0)
+ {
+ HDEBUG(D_transport)
+ debug_printf("failed reaping pipelined cmd responses\n");
+ close(sx->cctx.sock);
+ sx->cctx.sock = -1;
+ sx->early_pipe_active = FALSE;
+ goto PIPE_CONNECT_RETRY;
+ }
+ }
+#endif
+
/* If there is an I/O error, transmission of this message is deferred. If
there is a temporary rejection of STARRTLS and tls_tempfail_tryclear is
false, we also defer. However, if there is a temporary rejection of STARTTLS
STARTTLS, we carry on. This means we will try to send the message in clear,
unless the host is in hosts_require_tls (tested below). */
- if (!smtp_read_response(&inblock, buffer2, sizeof(buffer2), '2',
- ob->command_timeout))
+ if (!smtp_read_response(sx, buffer2, sizeof(buffer2), '2', ob->command_timeout))
{
if ( errno != 0
|| buffer2[0] == 0
|| (buffer2[0] == '4' && !ob->tls_tempfail_tryclear)
)
{
- Ustrncpy(buffer, buffer2, sizeof(buffer));
+ Ustrncpy(sx->buffer, buffer2, sizeof(sx->buffer));
+ sx->buffer[sizeof(sx->buffer)-1] = '\0';
goto RESPONSE_FAILED;
}
}
else
TLS_NEGOTIATE:
{
- int rc = tls_client_start(inblock.sock, host, addrlist, tblock
-# ifdef EXPERIMENTAL_DANE
- , dane ? &tlsa_dnsa : NULL
-# endif
- );
-
- /* TLS negotiation failed; give an error. From outside, this function may
- be called again to try in clear on a new connection, if the options permit
- it for this host. */
-
- if (rc != OK)
+ sx->conn_args.sending_ip_address = sending_ip_address;
+ if (!tls_client_start(&sx->cctx, &sx->conn_args, sx->addrlist, &tls_out, &tls_errstr))
{
-# ifdef EXPERIMENTAL_DANE
- if (rc == DEFER && dane)
- {
+ /* TLS negotiation failed; give an error. From outside, this function may
+ be called again to try in clear on a new connection, if the options permit
+ it for this host. */
+ TLS_CONN_FAILED:
+ DEBUG(D_tls) debug_printf("TLS session fail: %s\n", tls_errstr);
+
+# ifdef SUPPORT_DANE
+ if (sx->conn_args.dane)
+ {
log_write(0, LOG_MAIN,
- "DANE attempt failed; no TLS connection to %s [%s]",
- host->name, host->address);
+ "DANE attempt failed; TLS connection to %s [%s]: %s",
+ sx->conn_args.host->name, sx->conn_args.host->address, tls_errstr);
+# ifndef DISABLE_EVENT
+ (void) event_raise(sx->conn_args.tblock->event_action,
+ US"dane:fail", US"validation-failure", NULL); /* could do with better detail */
+# endif
}
# endif
- save_errno = ERRNO_TLSFAILURE;
- message = US"failure while setting up TLS session";
- send_quit = FALSE;
+ errno = ERRNO_TLSFAILURE;
+ message = string_sprintf("TLS session: %s", tls_errstr);
+ sx->send_quit = FALSE;
goto TLS_FAILED;
}
+ sx->send_tlsclose = TRUE;
- /* TLS session is set up */
+ /* TLS session is set up. Check the inblock fill level. If there is
+ content then as we have not yet done a tls read it must have arrived before
+ the TLS handshake, in-clear. That violates the sync requirement of the
+ STARTTLS RFC, so fail. */
+
+ if (sx->inblock.ptr != sx->inblock.ptrend)
+ {
+ DEBUG(D_tls)
+ {
+ int i = sx->inblock.ptrend - sx->inblock.ptr;
+ debug_printf("unused data in input buffer after ack for STARTTLS:\n"
+ "'%.*s'%s\n",
+ i > 100 ? 100 : i, sx->inblock.ptr, i > 100 ? "..." : "");
+ }
+ tls_errstr = US"synch error before connect";
+ goto TLS_CONN_FAILED;
+ }
- for (addr = addrlist; addr; addr = addr->next)
+ smtp_peer_options_wrap = smtp_peer_options;
+ for (address_item * addr = sx->addrlist; addr; addr = addr->next)
if (addr->transport_return == PENDING_DEFER)
{
addr->cipher = tls_out.cipher;
addr->peercert = tls_out.peercert;
addr->peerdn = tls_out.peerdn;
addr->ocsp = tls_out.ocsp;
+ addr->tlsver = tls_out.ver;
}
}
}
expand it here. $sending_ip_address and $sending_port are set up right at the
start of the Exim process (in exim.c). */
-if (tls_out.active >= 0)
+if (tls_out.active.sock >= 0)
{
- char *greeting_cmd;
- BOOL good_response;
+ uschar * greeting_cmd;
- if (helo_data == NULL)
+ if (!sx->helo_data && !(sx->helo_data = expand_string(ob->helo_data)))
{
- helo_data = expand_string(ob->helo_data);
- if (helo_data == NULL)
- {
- uschar *message = string_sprintf("failed to expand helo_data: %s",
- expand_string_message);
- set_errno_nohost(addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE);
- yield = DEFER;
- goto SEND_QUIT;
- }
+ uschar *message = string_sprintf("failed to expand helo_data: %s",
+ expand_string_message);
+ set_errno_nohost(sx->addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE, &sx->delivery_start);
+ yield = DEFER;
+ goto SEND_QUIT;
}
- /* For SMTPS we need to wait for the initial OK response. */
- if (smtps)
+#ifndef DISABLE_PIPE_CONNECT
+ /* For SMTPS there is no cleartext early-pipe; use the crypted permission bit.
+ We're unlikely to get the group sent and delivered before the server sends its
+ banner, but it's still worth sending as a group.
+ For STARTTLS allow for cleartext early-pipe but no crypted early-pipe, but not
+ the reverse. */
+
+ if (sx->smtps ? sx->early_pipe_ok : sx->early_pipe_active)
{
- good_response = smtp_read_response(&inblock, buffer, sizeof(buffer),
- '2', ob->command_timeout);
-#ifdef EXPERIMENTAL_DSN_INFO
- smtp_greeting = string_copy(buffer);
-#endif
- if (!good_response) goto RESPONSE_FAILED;
+ sx->peer_offered = sx->ehlo_resp.crypted_features;
+ if ((sx->early_pipe_active =
+ !!(sx->ehlo_resp.crypted_features & OPTION_EARLY_PIPE)))
+ DEBUG(D_transport) debug_printf("Using cached crypted PIPECONNECT\n");
}
+#endif
+#ifdef EXPERIMMENTAL_ESMTP_LIMITS
+ /* As we are about to send another EHLO, forget any LIMITS received so far. */
+ sx->peer_limit_mail = sx->peer_limit_rcpt = sx->peer_limit_rcptdom = 0;
+ if ((sx->max_mail = sx->conn_args.tblock->connection_max_message) == 0) sx->max_mail = 999999;
+ if ((sx->max_rcpt = sx->conn_args.tblock->max_addresses) == 0) sx->max_rcpt = 999999;
+ sx->single_rcpt_domain = FALSE;
+#endif
+
+ /* For SMTPS we need to wait for the initial OK response. */
+ if (sx->smtps)
+#ifndef DISABLE_PIPE_CONNECT
+ if (sx->early_pipe_active)
+ {
+ sx->pending_BANNER = TRUE;
+ sx->outblock.cmd_count = 1;
+ }
+ else
+#endif
+ if (!smtp_reap_banner(sx))
+ goto RESPONSE_FAILED;
- if (esmtp)
- greeting_cmd = "EHLO";
+ if (sx->lmtp)
+ greeting_cmd = US"LHLO";
+ else if (sx->esmtp)
+ greeting_cmd = US"EHLO";
else
{
- greeting_cmd = "HELO";
+ greeting_cmd = US"HELO";
DEBUG(D_transport)
debug_printf("not sending EHLO (host matches hosts_avoid_esmtp)\n");
}
- if (smtp_write_command(&outblock, FALSE, "%s %s\r\n",
- lmtp? "LHLO" : greeting_cmd, helo_data) < 0)
+ if (smtp_write_command(sx,
+#ifndef DISABLE_PIPE_CONNECT
+ sx->early_pipe_active ? SCMD_BUFFER :
+#endif
+ SCMD_FLUSH,
+ "%s %s\r\n", greeting_cmd, sx->helo_data) < 0)
goto SEND_FAILED;
- good_response = smtp_read_response(&inblock, buffer, sizeof(buffer),
- '2', ob->command_timeout);
-#ifdef EXPERIMENTAL_DSN_INFO
- helo_response = string_copy(buffer);
+
+#ifndef DISABLE_PIPE_CONNECT
+ if (sx->early_pipe_active)
+ sx->pending_EHLO = TRUE;
+ else
+#endif
+ {
+ if (!smtp_reap_ehlo(sx))
+#ifdef USE_GNUTLS
+ {
+ /* The GnuTLS layer in Exim only spots a server-rejection of a client
+ cert late, under TLS1.3 - which means here; the first time we try to
+ receive crypted data. Treat it as if it was a connect-time failure.
+ See also the early-pipe equivalent... which will be hard; every call
+ to sync_responses will need to check the result.
+ It would be nicer to have GnuTLS check the cert during the handshake.
+ Can it do that, with all the flexibility we need? */
+
+ tls_errstr = US"error on first read";
+ goto TLS_CONN_FAILED;
+ }
+#else
+ goto RESPONSE_FAILED;
#endif
- if (!good_response) goto RESPONSE_FAILED;
+ smtp_peer_options = 0;
+ }
}
/* If the host is required to use a secure channel, ensure that we
have one. */
-else if ( smtps
-# ifdef EXPERIMENTAL_DANE
- || dane
+else if ( sx->smtps
+# ifdef SUPPORT_DANE
+ || sx->conn_args.dane
# endif
- || verify_check_given_host(&ob->hosts_require_tls, host) == OK
+ || verify_check_given_host(CUSS &ob->hosts_require_tls, sx->conn_args.host) == OK
)
{
- save_errno = ERRNO_TLSREQUIRED;
+ errno = ERRNO_TLSREQUIRED;
message = string_sprintf("a TLS session is required, but %s",
- tls_offered ? "an attempt to start TLS failed"
- : "the server did not offer TLS support");
+ smtp_peer_options & OPTION_TLS
+ ? "an attempt to start TLS failed" : "the server did not offer TLS support");
+# if defined(SUPPORT_DANE) && !defined(DISABLE_EVENT)
+ if (sx->conn_args.dane)
+ (void) event_raise(sx->conn_args.tblock->event_action, US"dane:fail",
+ smtp_peer_options & OPTION_TLS
+ ? US"validation-failure" /* could do with better detail */
+ : US"starttls-not-supported",
+ NULL);
+# endif
goto TLS_FAILED;
}
-#endif /*SUPPORT_TLS*/
+#endif /*DISABLE_TLS*/
/* If TLS is active, we have just started it up and re-done the EHLO command,
so its response needs to be analyzed. If TLS is not active and this is a
continued session down a previously-used socket, we haven't just done EHLO, so
we skip this. */
-if (continue_hostname == NULL
-#ifdef SUPPORT_TLS
- || tls_out.active >= 0
+if ( !continue_hostname
+#ifndef DISABLE_TLS
+ || tls_out.active.sock >= 0
#endif
)
{
- if (esmtp || lmtp)
- peer_offered = ehlo_response(buffer, Ustrlen(buffer),
- 0 /* no TLS */
- | (lmtp && ob->lmtp_ignore_quota ? PEER_OFFERED_IGNQ : 0)
- | PEER_OFFERED_PRDR
-#ifdef SUPPORT_I18N
- | (addrlist->prop.utf8_msg ? PEER_OFFERED_UTF8 : 0)
- /*XXX if we hand peercaps on to continued-conn processes,
- must not depend on this addr */
+ if (sx->esmtp || sx->lmtp)
+ {
+#ifndef DISABLE_PIPE_CONNECT
+ if (!sx->early_pipe_active)
+#endif
+ {
+ sx->peer_offered = ehlo_response(sx->buffer,
+ 0 /* no TLS */
+#ifndef DISABLE_PIPE_CONNECT
+ | (sx->lmtp && ob->lmtp_ignore_quota ? OPTION_IGNQ : 0)
+ | OPTION_DSN | OPTION_PIPE | OPTION_SIZE
+ | OPTION_CHUNKING | OPTION_PRDR | OPTION_UTF8
+ | (tls_out.active.sock >= 0 ? OPTION_EARLY_PIPE : 0) /* not for lmtp */
+
+#else
+
+ | (sx->lmtp && ob->lmtp_ignore_quota ? OPTION_IGNQ : 0)
+ | OPTION_CHUNKING
+ | OPTION_PRDR
+# ifdef SUPPORT_I18N
+ | (sx->addrlist->prop.utf8_msg ? OPTION_UTF8 : 0)
+ /*XXX if we hand peercaps on to continued-conn processes,
+ must not depend on this addr */
+# endif
+ | OPTION_DSN
+ | OPTION_PIPE
+ | (ob->size_addition >= 0 ? OPTION_SIZE : 0)
#endif
- | PEER_OFFERED_DSN
- | PEER_OFFERED_PIPE
- | (ob->size_addition >= 0 ? PEER_OFFERED_SIZE : 0)
);
+#ifndef DISABLE_PIPE_CONNECT
+ if (tls_out.active.sock >= 0)
+ sx->ehlo_resp.crypted_features = sx->peer_offered;
+#endif
+
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+ if (tls_out.active.sock >= 0 || !(sx->peer_offered & OPTION_TLS))
+ {
+ ehlo_response_limits_read(sx);
+ ehlo_response_limits_apply(sx);
+ }
+#endif
+ }
+
+ /* Set for IGNOREQUOTA if the response to LHLO specifies support and the
+ lmtp_ignore_quota option was set. */
- /* Set for IGNOREQUOTA if the response to LHLO specifies support and the
- lmtp_ignore_quota option was set. */
+ sx->igquotstr = sx->peer_offered & OPTION_IGNQ ? US" IGNOREQUOTA" : US"";
- igquotstr = peer_offered & PEER_OFFERED_IGNQ ? US" IGNOREQUOTA" : US"";
+ /* If the response to EHLO specified support for the SIZE parameter, note
+ this, provided size_addition is non-negative. */
- /* If the response to EHLO specified support for the SIZE parameter, note
- this, provided size_addition is non-negative. */
+ smtp_peer_options |= sx->peer_offered & OPTION_SIZE;
- smtp_use_size = !!(peer_offered & PEER_OFFERED_SIZE);
+ /* Note whether the server supports PIPELINING. If hosts_avoid_esmtp matched
+ the current host, esmtp will be false, so PIPELINING can never be used. If
+ the current host matches hosts_avoid_pipelining, don't do it. */
- /* Note whether the server supports PIPELINING. If hosts_avoid_esmtp matched
- the current host, esmtp will be false, so PIPELINING can never be used. If
- the current host matches hosts_avoid_pipelining, don't do it. */
+ if ( sx->peer_offered & OPTION_PIPE
+ && verify_check_given_host(CUSS &ob->hosts_avoid_pipelining, sx->conn_args.host) != OK)
+ smtp_peer_options |= OPTION_PIPE;
- smtp_use_pipelining = peer_offered & PEER_OFFERED_PIPE
- && verify_check_given_host(&ob->hosts_avoid_pipelining, host) != OK;
+ DEBUG(D_transport) debug_printf("%susing PIPELINING\n",
+ smtp_peer_options & OPTION_PIPE ? "" : "not ");
- DEBUG(D_transport) debug_printf("%susing PIPELINING\n",
- smtp_use_pipelining ? "" : "not ");
+ if ( sx->peer_offered & OPTION_CHUNKING
+ && verify_check_given_host(CUSS &ob->hosts_try_chunking, sx->conn_args.host) == OK)
+ smtp_peer_options |= OPTION_CHUNKING;
+
+ if (smtp_peer_options & OPTION_CHUNKING)
+ DEBUG(D_transport) debug_printf("CHUNKING usable\n");
#ifndef DISABLE_PRDR
- if ( peer_offered & PEER_OFFERED_PRDR
- && verify_check_given_host(&ob->hosts_try_prdr, host) != OK)
- peer_offered &= ~PEER_OFFERED_PRDR;
+ if ( sx->peer_offered & OPTION_PRDR
+ && verify_check_given_host(CUSS &ob->hosts_try_prdr, sx->conn_args.host) == OK)
+ smtp_peer_options |= OPTION_PRDR;
- if (peer_offered & PEER_OFFERED_PRDR)
- {DEBUG(D_transport) debug_printf("PRDR usable\n");}
+ if (smtp_peer_options & OPTION_PRDR)
+ DEBUG(D_transport) debug_printf("PRDR usable\n");
#endif
- /* Note if the server supports DSN */
- smtp_use_dsn = !!(peer_offered & PEER_OFFERED_DSN);
- DEBUG(D_transport) debug_printf("%susing DSN\n", smtp_use_dsn ? "" : "not ");
+ /* Note if the server supports DSN */
+ smtp_peer_options |= sx->peer_offered & OPTION_DSN;
+ DEBUG(D_transport) debug_printf("%susing DSN\n",
+ sx->peer_offered & OPTION_DSN ? "" : "not ");
+
+#ifndef DISABLE_PIPE_CONNECT
+ if ( sx->early_pipe_ok
+ && !sx->early_pipe_active
+ && tls_out.active.sock >= 0
+ && smtp_peer_options & OPTION_PIPE
+ && ( sx->ehlo_resp.cleartext_features | sx->ehlo_resp.crypted_features)
+ & OPTION_EARLY_PIPE)
+ {
+ DEBUG(D_transport) debug_printf("PIPECONNECT usable in future for this IP\n");
+ sx->ehlo_resp.crypted_auths = study_ehlo_auths(sx);
+ write_ehlo_cache_entry(sx);
+ }
+#endif
- /* Note if the response to EHLO specifies support for the AUTH extension.
- If it has, check that this host is one we want to authenticate to, and do
- the business. The host name and address must be available when the
- authenticator's client driver is running. */
+ /* Note if the response to EHLO specifies support for the AUTH extension.
+ If it has, check that this host is one we want to authenticate to, and do
+ the business. The host name and address must be available when the
+ authenticator's client driver is running. */
- switch (yield = smtp_auth(buffer, sizeof(buffer), addrlist, host,
- ob, esmtp, &inblock, &outblock))
- {
- default: goto SEND_QUIT;
- case OK: break;
- case FAIL_SEND: goto SEND_FAILED;
- case FAIL: goto RESPONSE_FAILED;
+ switch (yield = smtp_auth(sx))
+ {
+ default: goto SEND_QUIT;
+ case OK: break;
+ case FAIL_SEND: goto SEND_FAILED;
+ case FAIL: goto RESPONSE_FAILED;
+ }
}
}
+sx->pipelining_used = pipelining_active = !!(smtp_peer_options & OPTION_PIPE);
/* The setting up of the SMTP call is now complete. Any subsequent errors are
message-specific. */
-setting_up = FALSE;
+sx->setting_up = FALSE;
#ifdef SUPPORT_I18N
-if (addrlist->prop.utf8_msg)
+if (sx->addrlist->prop.utf8_msg)
{
- utf8_needed = !addrlist->prop.utf8_downcvt
- && !addrlist->prop.utf8_downcvt_maybe;
- DEBUG(D_transport) if (!utf8_needed) debug_printf("utf8: %s downconvert\n",
- addrlist->prop.utf8_downcvt ? "mandatory" : "optional");
+ uschar * s;
+
+ /* If the transport sets a downconversion mode it overrides any set by ACL
+ for the message. */
+
+ if ((s = ob->utf8_downconvert))
+ {
+ if (!(s = expand_string(s)))
+ {
+ message = string_sprintf("failed to expand utf8_downconvert: %s",
+ expand_string_message);
+ set_errno_nohost(sx->addrlist, ERRNO_EXPANDFAIL, message, DEFER, FALSE, &sx->delivery_start);
+ yield = DEFER;
+ goto SEND_QUIT;
+ }
+ switch (*s)
+ {
+ case '1': sx->addrlist->prop.utf8_downcvt = TRUE;
+ sx->addrlist->prop.utf8_downcvt_maybe = FALSE;
+ break;
+ case '0': sx->addrlist->prop.utf8_downcvt = FALSE;
+ sx->addrlist->prop.utf8_downcvt_maybe = FALSE;
+ break;
+ case '-': if (s[1] == '1')
+ {
+ sx->addrlist->prop.utf8_downcvt = FALSE;
+ sx->addrlist->prop.utf8_downcvt_maybe = TRUE;
+ }
+ break;
+ }
+ }
+
+ sx->utf8_needed = !sx->addrlist->prop.utf8_downcvt
+ && !sx->addrlist->prop.utf8_downcvt_maybe;
+ DEBUG(D_transport) if (!sx->utf8_needed)
+ debug_printf("utf8: %s downconvert\n",
+ sx->addrlist->prop.utf8_downcvt ? "mandatory" : "optional");
}
/* If this is an international message we need the host to speak SMTPUTF8 */
-if (utf8_needed && !(peer_offered & PEER_OFFERED_UTF8))
+if (sx->utf8_needed && !(sx->peer_offered & OPTION_UTF8))
{
errno = ERRNO_UTF8_FWD;
goto RESPONSE_FAILED;
}
-#endif
+#endif /*SUPPORT_I18N*/
+
+return OK;
-/* If there is a filter command specified for this transport, we can now
-set it up. This cannot be done until the identify of the host is known. */
-if (tblock->filter_command != NULL)
{
- BOOL rc;
- uschar buffer[64];
- sprintf(CS buffer, "%.50s transport", tblock->name);
- rc = transport_set_up_command(&transport_filter_argv, tblock->filter_command,
- TRUE, DEFER, addrlist, buffer, NULL);
- transport_filter_timeout = tblock->filter_timeout;
+ int code;
- /* On failure, copy the error to all addresses, abandon the SMTP call, and
- yield ERROR. */
+ RESPONSE_FAILED:
+ if (errno == ECONNREFUSED) /* first-read error on a TFO conn */
+ {
+ /* There is a testing facility for simulating a connection timeout, as I
+ can't think of any other way of doing this. It converts a connection
+ refused into a timeout if the timeout is set to 999999. This is done for
+ a 3whs connection in ip_connect(), but a TFO connection does not error
+ there - instead it gets ECONNREFUSED on the first data read. Tracking
+ that a TFO really was done is too hard, or we would set a
+ sx->pending_conn_done bit and test that in smtp_reap_banner() and
+ smtp_reap_ehlo(). That would let us also add the conn-timeout to the
+ cmd-timeout. */
+
+ if (f.running_in_test_harness && ob->connect_timeout == 999999)
+ errno = ETIMEDOUT;
+ set_errno_nohost(sx->addrlist,
+ errno == ETIMEDOUT ? ERRNO_CONNECTTIMEOUT : errno,
+ sx->verify ? US strerror(errno) : NULL,
+ DEFER, FALSE, &sx->delivery_start);
+ sx->send_quit = FALSE;
+ return DEFER;
+ }
+
+ /* really an error on an SMTP read */
+ message = NULL;
+ sx->send_quit = check_response(sx->conn_args.host, &errno, sx->addrlist->more_errno,
+ sx->buffer, &code, &message, &pass_message);
+ yield = DEFER;
+ goto FAILED;
+
+ SEND_FAILED:
+ code = '4';
+ message = US string_sprintf("smtp send to %s [%s] failed: %s",
+ sx->conn_args.host->name, sx->conn_args.host->address, strerror(errno));
+ sx->send_quit = FALSE;
+ yield = DEFER;
+ goto FAILED;
+
+ EHLOHELO_FAILED:
+ code = '4';
+ message = string_sprintf("Remote host closed connection in response to %s"
+ " (EHLO response was: %s)", smtp_command, sx->buffer);
+ sx->send_quit = FALSE;
+ yield = DEFER;
+ goto FAILED;
+
+ /* This label is jumped to directly when a TLS negotiation has failed,
+ or was not done for a host for which it is required. Values will be set
+ in message and errno, and setting_up will always be true. Treat as
+ a temporary error. */
+
+#ifndef DISABLE_TLS
+ TLS_FAILED:
+ code = '4', yield = DEFER;
+ goto FAILED;
+#endif
+
+ /* The failure happened while setting up the call; see if the failure was
+ a 5xx response (this will either be on connection, or following HELO - a 5xx
+ after EHLO causes it to try HELO). If so, and there are no more hosts to try,
+ fail all addresses, as this host is never going to accept them. For other
+ errors during setting up (timeouts or whatever), defer all addresses, and
+ yield DEFER, so that the host is not tried again for a while.
+
+ XXX This peeking for another host feels like a layering violation. We want
+ to note the host as unusable, but down here we shouldn't know if this was
+ the last host to try for the addr(list). Perhaps the upper layer should be
+ the one to do set_errno() ? The problem is that currently the addr is where
+ errno etc. are stashed, but until we run out of hosts to try the errors are
+ host-specific. Maybe we should enhance the host_item definition? */
+
+FAILED:
+ sx->ok = FALSE; /* For when reached by GOTO */
+ set_errno(sx->addrlist, errno, message,
+ sx->conn_args.host->next
+ ? DEFER
+ : code == '5'
+#ifdef SUPPORT_I18N
+ || errno == ERRNO_UTF8_FWD
+#endif
+ ? FAIL : DEFER,
+ pass_message,
+ errno == ECONNREFUSED ? NULL : sx->conn_args.host,
+#ifdef EXPERIMENTAL_DSN_INFO
+ sx->smtp_greeting, sx->helo_response,
+#endif
+ &sx->delivery_start);
+ }
- if (!rc)
+
+SEND_QUIT:
+
+if (sx->send_quit)
+ (void)smtp_write_command(sx, SCMD_FLUSH, "QUIT\r\n");
+
+#ifndef DISABLE_TLS
+if (sx->cctx.tls_ctx)
+ {
+ if (sx->send_tlsclose)
{
- set_errno_nohost(addrlist->next, addrlist->basic_errno, addrlist->message, DEFER,
- FALSE);
- yield = ERROR;
- goto SEND_QUIT;
+ tls_close(sx->cctx.tls_ctx, TLS_SHUTDOWN_NOWAIT);
+ sx->send_tlsclose = FALSE;
}
+ sx->cctx.tls_ctx = NULL;
}
+#endif
+/* Close the socket, and return the appropriate value, first setting
+works because the NULL setting is passed back to the calling process, and
+remote_max_parallel is forced to 1 when delivering over an existing connection,
+*/
+
+HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP(close)>>\n");
+if (sx->send_quit)
+ {
+ shutdown(sx->cctx.sock, SHUT_WR);
+ if (fcntl(sx->cctx.sock, F_SETFL, O_NONBLOCK) == 0)
+ for (int i = 16; read(sx->cctx.sock, sx->inbuffer, sizeof(sx->inbuffer)) > 0 && i > 0;)
+ i--; /* drain socket */
+ sx->send_quit = FALSE;
+ }
+(void)close(sx->cctx.sock);
+sx->cctx.sock = -1;
+
+#ifndef DISABLE_EVENT
+(void) event_raise(sx->conn_args.tblock->event_action, US"tcp:close", NULL, NULL);
+#endif
+
+smtp_debug_cmd_report();
+continue_transport = NULL;
+continue_hostname = NULL;
+return yield;
+}
-/* For messages that have more than the maximum number of envelope recipients,
-we want to send several transactions down the same SMTP connection. (See
-comments in deliver.c as to how this reconciles, heuristically, with
-remote_max_parallel.) This optimization was added to Exim after the following
-code was already working. The simplest way to put it in without disturbing the
-code was to use a goto to jump back to this point when there is another
-transaction to handle. */
-SEND_MESSAGE:
-sync_addr = first_addr;
-address_count = 0;
-ok = FALSE;
-send_rset = TRUE;
-completed_address = FALSE;
-/* Initiate a message transfer. If we know the receiving MTA supports the SIZE
-qualification, send it, adding something to the message size to allow for
-imprecision and things that get added en route. Exim keeps the number of lines
+/* Create the string of options that will be appended to the MAIL FROM:
+in the connection context buffer */
+
+static int
+build_mailcmd_options(smtp_context * sx, address_item * addrlist)
+{
+uschar * p = sx->buffer;
+address_item * addr;
+int address_count;
+
+*p = 0;
+
+/* If we know the receiving MTA supports the SIZE qualification, and we know it,
+send it, adding something to the message size to allow for imprecision
+and things that get added en route. Exim keeps the number of lines
in a message, so we can give an accurate value for the original message, but we
need some additional to handle added headers. (Double "." characters don't get
included in the count.) */
-p = buffer;
-*p = 0;
-
-if (smtp_use_size)
+if ( message_size > 0
+ && sx->peer_offered & OPTION_SIZE && !(sx->avoid_option & OPTION_SIZE))
{
- sprintf(CS p, " SIZE=%d", message_size+message_linecount+ob->size_addition);
+/*XXX problem here under spool_files_wireformat?
+Or just forget about lines? Or inflate by a fixed proportion? */
+
+ sprintf(CS p, " SIZE=%d", message_size+message_linecount+(SOB sx->conn_args.ob)->size_addition);
while (*p) p++;
}
#ifndef DISABLE_PRDR
-prdr_active = FALSE;
-if (peer_offered & PEER_OFFERED_PRDR)
- for (addr = first_addr; addr; addr = addr->next)
+/* If it supports Per-Recipient Data Responses, and we have more than one recipient,
+request that */
+
+sx->prdr_active = FALSE;
+if (smtp_peer_options & OPTION_PRDR)
+ for (address_item * addr = addrlist; addr; addr = addr->next)
if (addr->transport_return == PENDING_DEFER)
{
for (addr = addr->next; addr; addr = addr->next)
if (addr->transport_return == PENDING_DEFER)
{ /* at least two recipients to send */
- prdr_active = TRUE;
+ sx->prdr_active = TRUE;
sprintf(CS p, " PRDR"); p += 5;
break;
}
#endif
#ifdef SUPPORT_I18N
-if ( addrlist->prop.utf8_msg
+/* If it supports internationalised messages, and this meesage need that,
+request it */
+
+if ( sx->peer_offered & OPTION_UTF8
+ && addrlist->prop.utf8_msg
&& !addrlist->prop.utf8_downcvt
- && peer_offered & PEER_OFFERED_UTF8
)
- sprintf(CS p, " SMTPUTF8"), p += 9;
+ Ustrcpy(p, US" SMTPUTF8"), p += 9;
#endif
-/* check if all addresses have lasthop flag */
-/* do not send RET and ENVID if true */
-for (dsn_all_lasthop = TRUE, addr = first_addr;
- address_count < max_rcpt && addr != NULL;
- addr = addr->next)
- if ((addr->dsn_flags & rf_dsnlasthop) != 1)
+/* check if all addresses have DSN-lasthop flag; do not send RET and ENVID if so */
+for (sx->dsn_all_lasthop = TRUE, addr = addrlist, address_count = 0;
+ addr && address_count < sx->max_rcpt; /*XXX maybe also || sx->single_rcpt_domain ? */
+ addr = addr->next) if (addr->transport_return == PENDING_DEFER)
+ {
+ address_count++;
+ if (!(addr->dsn_flags & rf_dsnlasthop))
{
- dsn_all_lasthop = FALSE;
+ sx->dsn_all_lasthop = FALSE;
break;
}
+ }
+
+/* Add any DSN flags to the mail command */
+
+if (sx->peer_offered & OPTION_DSN && !sx->dsn_all_lasthop)
+ {
+ if (dsn_ret == dsn_ret_hdrs)
+ { Ustrcpy(p, US" RET=HDRS"); p += 9; }
+ else if (dsn_ret == dsn_ret_full)
+ { Ustrcpy(p, US" RET=FULL"); p += 9; }
+
+ if (dsn_envid)
+ {
+ string_format(p, sizeof(sx->buffer) - (p-sx->buffer), " ENVID=%s", dsn_envid);
+ while (*p) p++;
+ }
+ }
+
+/* If an authenticated_sender override has been specified for this transport
+instance, expand it. If the expansion is forced to fail, and there was already
+an authenticated_sender for this message, the original value will be used.
+Other expansion failures are serious. An empty result is ignored, but there is
+otherwise no check - this feature is expected to be used with LMTP and other
+cases where non-standard addresses (e.g. without domains) might be required. */
+
+return smtp_mail_auth_str(sx, p, addrlist) ? ERROR : OK;
+}
+
+
+static void
+build_rcptcmd_options(smtp_context * sx, const address_item * addr)
+{
+uschar * p = sx->buffer;
+*p = 0;
-/* Add any DSN flags to the mail command */
+/* Add any DSN flags to the rcpt command */
-if (smtp_use_dsn && !dsn_all_lasthop)
+if (sx->peer_offered & OPTION_DSN && !(addr->dsn_flags & rf_dsnlasthop))
{
- if (dsn_ret == dsn_ret_hdrs)
- {
- Ustrcpy(p, " RET=HDRS");
- while (*p) p++;
- }
- else if (dsn_ret == dsn_ret_full)
+ if (addr->dsn_flags & rf_dsnflags)
{
- Ustrcpy(p, " RET=FULL");
+ BOOL first = TRUE;
+
+ Ustrcpy(p, US" NOTIFY=");
while (*p) p++;
+ for (int i = 0; i < nelem(rf_list); i++) if (addr->dsn_flags & rf_list[i])
+ {
+ if (!first) *p++ = ',';
+ first = FALSE;
+ Ustrcpy(p, rf_names[i]);
+ while (*p) p++;
+ }
}
- if (dsn_envid != NULL)
+
+ if (addr->dsn_orcpt)
{
- string_format(p, sizeof(buffer) - (p-buffer), " ENVID=%s", dsn_envid);
+ string_format(p, sizeof(sx->buffer) - (p-sx->buffer), " ORCPT=%s",
+ addr->dsn_orcpt);
while (*p) p++;
}
}
+}
-/* If an authenticated_sender override has been specified for this transport
-instance, expand it. If the expansion is forced to fail, and there was already
-an authenticated_sender for this message, the original value will be used.
-Other expansion failures are serious. An empty result is ignored, but there is
-otherwise no check - this feature is expected to be used with LMTP and other
-cases where non-standard addresses (e.g. without domains) might be required. */
-if (smtp_mail_auth_str(p, sizeof(buffer) - (p-buffer), addrlist, ob))
+
+/*
+Return:
+ 0 good, rcpt results in addr->transport_return (PENDING_OK, DEFER, FAIL)
+ -1 MAIL response error
+ -2 any non-MAIL read i/o error
+ -3 non-MAIL response timeout
+ -4 internal error; channel still usable
+ -5 transmit failed
+ */
+
+int
+smtp_write_mail_and_rcpt_cmds(smtp_context * sx, int * yield)
+{
+address_item * addr;
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+address_item * restart_addr = NULL;
+#endif
+int address_count, pipe_limit;
+int rc;
+
+if (build_mailcmd_options(sx, sx->first_addr) != OK)
{
- yield = ERROR;
- goto SEND_QUIT;
+ *yield = ERROR;
+ return -4;
}
/* From here until we send the DATA command, we can make use of PIPELINING
When PIPELINING is off, each command written reports that it has flushed the
buffer. */
-pending_MAIL = TRUE; /* The block starts with MAIL */
+sx->pending_MAIL = TRUE; /* The block starts with MAIL */
{
- uschar * s = return_path;
+ uschar * s = sx->from_addr;
#ifdef SUPPORT_I18N
uschar * errstr = NULL;
for the to-addresses (done below), and also (ugly) for re-doing when building
the delivery log line. */
- if ( addrlist->prop.utf8_msg
- && (addrlist->prop.utf8_downcvt || !(peer_offered & PEER_OFFERED_UTF8))
+ if ( sx->addrlist->prop.utf8_msg
+ && (sx->addrlist->prop.utf8_downcvt || !(sx->peer_offered & OPTION_UTF8))
)
{
- if (s = string_address_utf8_to_alabel(return_path, &errstr), errstr)
+ if (s = string_address_utf8_to_alabel(s, &errstr), errstr)
{
- set_errno_nohost(addrlist, ERRNO_EXPANDFAIL, errstr, DEFER, FALSE);
- yield = ERROR;
- goto SEND_QUIT;
+ set_errno_nohost(sx->addrlist, ERRNO_EXPANDFAIL, errstr, DEFER, FALSE, &sx->delivery_start);
+ *yield = ERROR;
+ return -4;
}
- setflag(addrlist, af_utf8_downcvt);
+ setflag(sx->addrlist, af_utf8_downcvt);
}
#endif
- rc = smtp_write_command(&outblock, smtp_use_pipelining,
- "MAIL FROM:<%s>%s\r\n", s, buffer);
+ rc = smtp_write_command(sx, pipelining_active ? SCMD_BUFFER : SCMD_FLUSH,
+ "MAIL FROM:<%s>%s\r\n", s, sx->buffer);
}
mail_command = string_copy(big_buffer); /* Save for later error message */
switch(rc)
{
case -1: /* Transmission error */
- goto SEND_FAILED;
+ return -5;
- case +1: /* Block was sent */
- if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
- ob->command_timeout))
+ case +1: /* Cmd was sent */
+ if (!smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2',
+ (SOB sx->conn_args.ob)->command_timeout))
{
- if (errno == 0 && buffer[0] == '4')
+ if (errno == 0 && sx->buffer[0] == '4')
{
errno = ERRNO_MAIL4XX;
- addrlist->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
+ sx->addrlist->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
}
- goto RESPONSE_FAILED;
+ return -1;
}
- pending_MAIL = FALSE;
+ sx->pending_MAIL = FALSE;
break;
+
+ /* otherwise zero: command queued for pipeline */
}
/* Pass over all the relevant recipient addresses for this host, which are the
ones that have status PENDING_DEFER. If we are using PIPELINING, we can send
several before we have to read the responses for those seen so far. This
checking is done by a subroutine because it also needs to be done at the end.
-Send only up to max_rcpt addresses at a time, leaving first_addr pointing to
+Send only up to max_rcpt addresses at a time, leaving next_addr pointing to
the next one if not all are sent.
In the MUA wrapper situation, we want to flush the PIPELINING buffer for the
last address because we want to abort if any recipients have any kind of
problem, temporary or permanent. We know that all recipient addresses will have
the PENDING_DEFER status, because only one attempt is ever made, and we know
-that max_rcpt will be large, so all addresses will be done at once. */
+that max_rcpt will be large, so all addresses will be done at once.
+
+For verify we flush the pipeline after any (the only) rcpt address. */
-for (addr = first_addr;
- address_count < max_rcpt && addr != NULL;
- addr = addr->next)
+for (addr = sx->first_addr, address_count = 0, pipe_limit = 100;
+ addr && address_count < sx->max_rcpt;
+ addr = addr->next) if (addr->transport_return == PENDING_DEFER)
{
- int count;
+ int cmds_sent;
BOOL no_flush;
uschar * rcpt_addr;
- addr->dsn_aware = smtp_use_dsn ? dsn_support_yes : dsn_support_no;
-
- if (addr->transport_return != PENDING_DEFER) continue;
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+ if ( sx->single_rcpt_domain /* restriction on domains */
+ && address_count > 0 /* not first being sent */
+ && Ustrcmp(addr->domain, sx->first_addr->domain) != 0 /* dom diff from first */
+ )
+ {
+ DEBUG(D_transport) debug_printf("skipping different domain %s\n", addr->domain);
- address_count++;
- no_flush = smtp_use_pipelining && (!mua_wrapper || addr->next != NULL);
+ /* Ensure the smtp-response reaper does not think the address had a RCPT
+ command sent for it. Reset to PENDING_DEFER in smtp_deliver(), where we
+ goto SEND_MESSAGE. */
- /* Add any DSN flags to the rcpt command and add to the sent string */
+ addr->transport_return = SKIP;
+ if (!restart_addr) restart_addr = addr; /* note restart point */
+ continue; /* skip this one */
+ }
+#endif
- p = buffer;
- *p = 0;
+ addr->dsn_aware = sx->peer_offered & OPTION_DSN
+ ? dsn_support_yes : dsn_support_no;
- if (smtp_use_dsn && (addr->dsn_flags & rf_dsnlasthop) != 1)
- {
- if ((addr->dsn_flags & rf_dsnflags) != 0)
- {
- int i;
- BOOL first = TRUE;
- Ustrcpy(p, " NOTIFY=");
- while (*p) p++;
- for (i = 0; i < 4; i++)
- if ((addr->dsn_flags & rf_list[i]) != 0)
- {
- if (!first) *p++ = ',';
- first = FALSE;
- Ustrcpy(p, rf_names[i]);
- while (*p) p++;
- }
- }
+ address_count++;
+ if (pipe_limit-- <= 0)
+ { no_flush = FALSE; pipe_limit = 100; }
+ else
+ no_flush = pipelining_active && !sx->verify
+ && (!mua_wrapper || addr->next && address_count < sx->max_rcpt);
- if (addr->dsn_orcpt != NULL)
- {
- string_format(p, sizeof(buffer) - (p-buffer), " ORCPT=%s",
- addr->dsn_orcpt);
- while (*p) p++;
- }
- }
+ build_rcptcmd_options(sx, addr);
/* Now send the RCPT command, and process outstanding responses when
necessary. After a timeout on RCPT, we just end the function, leaving the
yield as OK, because this error can often mean that there is a problem with
just one address, so we don't want to delay the host. */
- rcpt_addr = transport_rcpt_address(addr, tblock->rcpt_include_affixes);
+ rcpt_addr = transport_rcpt_address(addr, sx->conn_args.tblock->rcpt_include_affixes);
#ifdef SUPPORT_I18N
- {
- uschar * dummy_errstr;
- if ( testflag(addrlist, af_utf8_downcvt)
- && (rcpt_addr = string_address_utf8_to_alabel(rcpt_addr, &dummy_errstr),
- dummy_errstr
- ) )
+ if ( testflag(sx->addrlist, af_utf8_downcvt)
+ && !(rcpt_addr = string_address_utf8_to_alabel(rcpt_addr, NULL))
+ )
{
+ /*XXX could we use a per-address errstr here? Not fail the whole send? */
errno = ERRNO_EXPANDFAIL;
- goto SEND_FAILED;
+ return -5; /*XXX too harsh? */
}
- }
#endif
- count = smtp_write_command(&outblock, no_flush, "RCPT TO:<%s>%s%s\r\n",
- rcpt_addr, igquotstr, buffer);
+ cmds_sent = smtp_write_command(sx, no_flush ? SCMD_BUFFER : SCMD_FLUSH,
+ "RCPT TO:<%s>%s%s\r\n", rcpt_addr, sx->igquotstr, sx->buffer);
- if (count < 0) goto SEND_FAILED;
- if (count > 0)
+ if (cmds_sent < 0) return -5;
+ if (cmds_sent > 0)
{
- switch(sync_responses(first_addr, tblock->rcpt_include_affixes,
- &sync_addr, host, count, ob->address_retry_include_sender,
- pending_MAIL, 0, &inblock, ob->command_timeout, buffer,
- sizeof(buffer)))
+ switch(sync_responses(sx, cmds_sent, 0))
{
- case 3: ok = TRUE; /* 2xx & 5xx => OK & progress made */
- case 2: completed_address = TRUE; /* 5xx (only) => progress made */
- break;
+ case 3: sx->ok = TRUE; /* 2xx & 5xx => OK & progress made */
+ case 2: sx->completed_addr = TRUE; /* 5xx (only) => progress made */
+ break;
+
+ case 1: sx->ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
+ if (!sx->lmtp) /* can't tell about progress yet */
+ sx->completed_addr = TRUE;
+ case 0: /* No 2xx or 5xx, but no probs */
+ /* If any RCPT got a 452 response then next_addr has been updated
+ for restarting with a new MAIL on the same connection. Send no more
+ RCPTs for this MAIL. */
+
+ if (sx->RCPT_452)
+ {
+ DEBUG(D_transport) debug_printf("seen 452 too-many-rcpts\n");
+ sx->RCPT_452 = FALSE;
+ /* sx->next_addr has been reset for fast_retry */
+ return 0;
+ }
+ break;
+
+ case -1: return -3; /* Timeout on RCPT */
+ case -2: return -2; /* non-MAIL read i/o error */
+ default: return -1; /* any MAIL error */
+
+#ifndef DISABLE_PIPE_CONNECT
+ case -4: return -1; /* non-2xx for pipelined banner or EHLO */
+ case -5: return -1; /* TLS first-read error */
+#endif
+ }
+ }
+ } /* Loop for next address */
- case 1: ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
- if (!lmtp) completed_address = TRUE; /* can't tell about progress yet */
- case 0: /* No 2xx or 5xx, but no probs */
- break;
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+sx->next_addr = restart_addr ? restart_addr : addr;
+#else
+sx->next_addr = addr;
+#endif
+return 0;
+}
+
+
+#ifndef DISABLE_TLS
+/*****************************************************
+* Proxy TLS connection for another transport process *
+******************************************************/
+/*
+Close the unused end of the pipe, fork once more, then use the given buffer
+as a staging area, and select on both the given fd and the TLS'd client-fd for
+data to read (per the coding in ip_recv() and fd_ready() this is legitimate).
+Do blocking full-size writes, and reads under a timeout. Once both input
+channels are closed, exit the process.
+
+Arguments:
+ ct_ctx tls context
+ buf space to use for buffering
+ bufsiz size of buffer
+ pfd pipe filedescriptor array; [0] is comms to proxied process
+ timeout per-read timeout, seconds
+ host hostname of remote
+
+Does not return.
+*/
+
+void
+smtp_proxy_tls(void * ct_ctx, uschar * buf, size_t bsize, int * pfd,
+ int timeout, const uschar * host)
+{
+struct pollfd p[2] = {{.fd = tls_out.active.sock, .events = POLLIN},
+ {.fd = pfd[0], .events = POLLIN}};
+int rc, i;
+BOOL send_tls_shutdown = TRUE;
+
+close(pfd[1]);
+if ((rc = exim_fork(US"tls-proxy")))
+ _exit(rc < 0 ? EXIT_FAILURE : EXIT_SUCCESS);
+
+set_process_info("proxying TLS connection for continued transport to %s\n", host);
+
+do
+ {
+ time_t time_left = timeout;
+ time_t time_start = time(NULL);
+
+ /* wait for data */
+ do
+ {
+ rc = poll(p, 2, time_left * 1000);
- case -1: goto END_OFF; /* Timeout on RCPT */
- default: goto RESPONSE_FAILED; /* I/O error, or any MAIL error */
+ if (rc < 0 && errno == EINTR)
+ if ((time_left -= time(NULL) - time_start) > 0) continue;
+
+ if (rc <= 0)
+ {
+ DEBUG(D_transport) if (rc == 0) debug_printf("%s: timed out\n", __FUNCTION__);
+ goto done;
+ }
+
+ /* For errors where not readable, bomb out */
+
+ if (p[0].revents & POLLERR || p[1].revents & POLLERR)
+ {
+ DEBUG(D_transport) debug_printf("select: exceptional cond on %s fd\n",
+ p[0].revents & POLLERR ? "tls" : "proxy");
+ if (!(p[0].revents & POLLIN || p[1].events & POLLIN))
+ goto done;
+ DEBUG(D_transport) debug_printf("- but also readable; no exit yet\n");
}
- pending_MAIL = FALSE; /* Dealt with MAIL */
}
- } /* Loop for next address */
+ while (rc < 0 || !(p[0].revents & POLLIN || p[1].revents & POLLIN));
+
+ /* handle inbound data */
+ if (p[0].revents & POLLIN)
+ if ((rc = tls_read(ct_ctx, buf, bsize)) <= 0) /* Expect -1 for EOF; */
+ { /* that reaps the TLS Close Notify record */
+ p[0].fd = -1;
+ shutdown(pfd[0], SHUT_WR);
+ timeout = 5;
+ }
+ else
+ for (int nbytes = 0; rc - nbytes > 0; nbytes += i)
+ if ((i = write(pfd[0], buf + nbytes, rc - nbytes)) < 0) goto done;
+
+ /* Handle outbound data. We cannot combine payload and the TLS-close
+ due to the limitations of the (pipe) channel feeding us. Maybe use a unix-domain
+ socket? */
+ if (p[1].revents & POLLIN)
+ if ((rc = read(pfd[0], buf, bsize)) <= 0)
+ {
+ p[1].fd = -1;
-/* If we are an MUA wrapper, abort if any RCPTs were rejected, either
-permanently or temporarily. We should have flushed and synced after the last
-RCPT. */
+# ifdef EXIM_TCP_CORK /* Use _CORK to get TLS Close Notify in FIN segment */
+ (void) setsockopt(tls_out.active.sock, IPPROTO_TCP, EXIM_TCP_CORK, US &on, sizeof(on));
+# endif
+ tls_shutdown_wr(ct_ctx);
+ send_tls_shutdown = FALSE;
+ shutdown(tls_out.active.sock, SHUT_WR);
+ }
+ else
+ for (int nbytes = 0; rc - nbytes > 0; nbytes += i)
+ if ((i = tls_write(ct_ctx, buf + nbytes, rc - nbytes, FALSE)) < 0)
+ goto done;
+ }
+while (p[0].fd >= 0 || p[1].fd >= 0);
-if (mua_wrapper)
+done:
+ if (send_tls_shutdown) tls_close(ct_ctx, TLS_SHUTDOWN_NOWAIT);
+ ct_ctx = NULL;
+ testharness_pause_ms(100); /* let logging complete */
+ exim_exit(EXIT_SUCCESS);
+}
+#endif
+
+
+/*************************************************
+* Deliver address list to given host *
+*************************************************/
+
+/* If continue_hostname is not null, we get here only when continuing to
+deliver down an existing channel. The channel was passed as the standard
+input. TLS is never active on a passed channel; the previous process either
+closes it down before passing the connection on, or inserts a TLS-proxy
+process and passes on a cleartext conection.
+
+Otherwise, we have to make a connection to the remote host, and do the
+initial protocol exchange.
+
+When running as an MUA wrapper, if the sender or any recipient is rejected,
+temporarily or permanently, we force failure for all recipients.
+
+Arguments:
+ addrlist chain of potential addresses to deliver; only those whose
+ transport_return field is set to PENDING_DEFER are currently
+ being processed; others should be skipped - they have either
+ been delivered to an earlier host or IP address, or been
+ failed by one of them.
+ host host to deliver to
+ host_af AF_INET or AF_INET6
+ defport default TCP/IP port to use if host does not specify, in host
+ byte order
+ interface interface to bind to, or NULL
+ tblock transport instance block
+ message_defer set TRUE if yield is OK, but all addresses were deferred
+ because of a non-recipient, non-host failure, that is, a
+ 4xx response to MAIL FROM, DATA, or ".". This is a defer
+ that is specific to the message.
+ suppress_tls if TRUE, don't attempt a TLS connection - this is set for
+ a second attempt after TLS initialization fails
+
+Returns: OK - the connection was made and the delivery attempted;
+ the result for each address is in its data block.
+ DEFER - the connection could not be made, or something failed
+ while setting up the SMTP session, or there was a
+ non-message-specific error, such as a timeout.
+ ERROR - a filter command is specified for this transport,
+ and there was a problem setting it up; OR helo_data
+ or add_headers or authenticated_sender is specified
+ for this transport, and the string failed to expand
+
+ For all non-OK returns the first addr of the list carries the
+ time taken for the attempt.
+*/
+
+static int
+smtp_deliver(address_item *addrlist, host_item *host, int host_af, int defport,
+ uschar *interface, transport_instance *tblock,
+ BOOL *message_defer, BOOL suppress_tls)
+{
+smtp_transport_options_block * ob = SOB tblock->options_block;
+int yield = OK;
+int save_errno;
+int rc;
+
+uschar *message = NULL;
+uschar new_message_id[MESSAGE_ID_LENGTH + 1];
+smtp_context * sx = store_get(sizeof(*sx), GET_TAINTED); /* tainted, for the data buffers */
+BOOL pass_message = FALSE;
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+BOOL mail_limit = FALSE;
+#endif
+#ifdef SUPPORT_DANE
+BOOL dane_held;
+#endif
+BOOL tcw_done = FALSE, tcw = FALSE;
+
+*message_defer = FALSE;
+
+memset(sx, 0, sizeof(*sx));
+sx->addrlist = addrlist;
+sx->conn_args.host = host;
+sx->conn_args.host_af = host_af;
+sx->port = defport;
+sx->conn_args.interface = interface;
+sx->helo_data = NULL;
+sx->conn_args.tblock = tblock;
+sx->conn_args.sock = -1;
+gettimeofday(&sx->delivery_start, NULL);
+sx->sync_addr = sx->first_addr = addrlist;
+
+REPEAT_CONN:
+#ifdef SUPPORT_DANE
+dane_held = FALSE;
+#endif
+
+/* Get the channel set up ready for a message, MAIL FROM being the next
+SMTP command to send. */
+
+if ((rc = smtp_setup_conn(sx, suppress_tls)) != OK)
{
- address_item *badaddr;
- for (badaddr = first_addr; badaddr; badaddr = badaddr->next)
- if (badaddr->transport_return != PENDING_OK)
+ timesince(&addrlist->delivery_time, &sx->delivery_start);
+ yield = rc;
+ goto TIDYUP;
+ }
+
+#ifdef SUPPORT_DANE
+/* If the connection used DANE, ignore for now any addresses with incompatible
+domains. The SNI has to be the domain. Arrange a whole new TCP conn later,
+just in case only TLS isn't enough. */
+
+if (sx->conn_args.dane)
+ {
+ const uschar * dane_domain = sx->first_addr->domain;
+
+ for (address_item * a = sx->first_addr->next; a; a = a->next)
+ if ( a->transport_return == PENDING_DEFER
+ && Ustrcmp(dane_domain, a->domain) != 0)
{
- /*XXX could we find a better errno than 0 here? */
- set_errno_nohost(addrlist, 0, badaddr->message, FAIL,
- testflag(badaddr, af_pass_message));
- ok = FALSE;
- break;
+ DEBUG(D_transport) debug_printf("DANE: holding %s for later\n", a->domain);
+ dane_held = TRUE;
+ a->transport_return = DANE;
}
}
+#endif
+
+/* If there is a filter command specified for this transport, we can now
+set it up. This cannot be done until the identity of the host is known. */
+
+if (tblock->filter_command)
+ {
+ transport_filter_timeout = tblock->filter_timeout;
+
+ /* On failure, copy the error to all addresses, abandon the SMTP call, and
+ yield ERROR. */
+
+ if (!transport_set_up_command(&transport_filter_argv,
+ tblock->filter_command, TRUE, DEFER, addrlist, FALSE,
+ string_sprintf("%.50s transport filter", tblock->name), NULL))
+ {
+ set_errno_nohost(addrlist->next, addrlist->basic_errno, addrlist->message, DEFER,
+ FALSE, &sx->delivery_start);
+ yield = ERROR;
+ goto SEND_QUIT;
+ }
+
+ if ( transport_filter_argv
+ && *transport_filter_argv
+ && **transport_filter_argv
+ && smtp_peer_options & OPTION_CHUNKING
+#ifndef DISABLE_DKIM
+ /* When dkim signing, chunking is handled even with a transport-filter */
+ && !(ob->dkim.dkim_private_key && ob->dkim.dkim_domain && ob->dkim.dkim_selector)
+ && !ob->dkim.force_bodyhash
+#endif
+ )
+ {
+ smtp_peer_options &= ~OPTION_CHUNKING;
+ DEBUG(D_transport) debug_printf("CHUNKING not usable due to transport filter\n");
+ }
+ }
+
+/* For messages that have more than the maximum number of envelope recipients,
+we want to send several transactions down the same SMTP connection. (See
+comments in deliver.c as to how this reconciles, heuristically, with
+remote_max_parallel.) This optimization was added to Exim after the following
+code was already working. The simplest way to put it in without disturbing the
+code was to use a goto to jump back to this point when there is another
+transaction to handle. */
+
+SEND_MESSAGE:
+sx->from_addr = return_path;
+sx->sync_addr = sx->first_addr;
+sx->ok = FALSE;
+sx->send_rset = TRUE;
+sx->completed_addr = FALSE;
+
+
+/* If we are a continued-connection-after-verify the MAIL and RCPT
+commands were already sent; do not re-send but do mark the addrs as
+having been accepted up to RCPT stage. A traditional cont-conn
+always has a sequence number greater than one. */
+
+if (continue_hostname && continue_sequence == 1)
+ {
+ /* sx->pending_MAIL = FALSE; */
+ sx->ok = TRUE;
+ /* sx->next_addr = NULL; */
+
+ for (address_item * addr = addrlist; addr; addr = addr->next)
+ addr->transport_return = PENDING_OK;
+ }
+else
+ {
+ /* Initiate a message transfer. */
+
+ switch(smtp_write_mail_and_rcpt_cmds(sx, &yield))
+ {
+ case 0: break;
+ case -1: case -2: goto RESPONSE_FAILED;
+ case -3: goto END_OFF;
+ case -4: goto SEND_QUIT;
+ default: goto SEND_FAILED;
+ }
+
+ /* If we are an MUA wrapper, abort if any RCPTs were rejected, either
+ permanently or temporarily. We should have flushed and synced after the last
+ RCPT. */
+
+ if (mua_wrapper)
+ {
+ address_item * a;
+ unsigned cnt;
+
+ for (a = sx->first_addr, cnt = 0; a && cnt < sx->max_rcpt; a = a->next, cnt++)
+ if (a->transport_return != PENDING_OK)
+ {
+ /*XXX could we find a better errno than 0 here? */
+ set_errno_nohost(addrlist, 0, a->message, FAIL,
+ testflag(a, af_pass_message), &sx->delivery_start);
+ sx->ok = FALSE;
+ break;
+ }
+ }
+ }
/* If ok is TRUE, we know we have got at least one good recipient, and must now
send DATA, but if it is FALSE (in the normal, non-wrapper case), we may still
have a good recipient buffered up if we are pipelining. We don't want to waste
time sending DATA needlessly, so we only send it if either ok is TRUE or if we
-are pipelining. The responses are all handled by sync_responses(). */
+are pipelining. The responses are all handled by sync_responses().
+If using CHUNKING, do not send a BDAT until we know how big a chunk we want
+to send is. */
-if (ok || (smtp_use_pipelining && !mua_wrapper))
+if ( !(smtp_peer_options & OPTION_CHUNKING)
+ && (sx->ok || (pipelining_active && !mua_wrapper)))
{
- int count = smtp_write_command(&outblock, FALSE, "DATA\r\n");
+ int count = smtp_write_command(sx, SCMD_FLUSH, "DATA\r\n");
+
if (count < 0) goto SEND_FAILED;
- switch(sync_responses(first_addr, tblock->rcpt_include_affixes, &sync_addr,
- host, count, ob->address_retry_include_sender, pending_MAIL,
- ok? +1 : -1, &inblock, ob->command_timeout, buffer, sizeof(buffer)))
+ switch(sync_responses(sx, count, sx->ok ? +1 : -1))
{
- case 3: ok = TRUE; /* 2xx & 5xx => OK & progress made */
- case 2: completed_address = TRUE; /* 5xx (only) => progress made */
+ case 3: sx->ok = TRUE; /* 2xx & 5xx => OK & progress made */
+ case 2: sx->completed_addr = TRUE; /* 5xx (only) => progress made */
break;
- case 1: ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
- if (!lmtp) completed_address = TRUE; /* can't tell about progress yet */
- case 0: break; /* No 2xx or 5xx, but no probs */
+ case 1: sx->ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
+ if (!sx->lmtp) sx->completed_addr = TRUE; /* can't tell about progress yet */
+ case 0: break; /* No 2xx or 5xx, but no probs */
- case -1: goto END_OFF; /* Timeout on RCPT */
+ case -1: goto END_OFF; /* Timeout on RCPT */
+
+#ifndef DISABLE_PIPE_CONNECT
+ case -5: /* TLS first-read error */
+ case -4: HDEBUG(D_transport)
+ debug_printf("failed reaping pipelined cmd responses\n");
+#endif
default: goto RESPONSE_FAILED; /* I/O error, or any MAIL/DATA error */
}
+ pipelining_active = FALSE;
+ data_command = string_copy(big_buffer); /* Save for later error message */
}
-/* Save the first address of the next batch. */
-
-first_addr = addr;
-
/* If there were no good recipients (but otherwise there have been no
problems), just set ok TRUE, since we have handled address-specific errors
already. Otherwise, it's OK to send the message. Use the check/escape mechanism
well as body. Set the appropriate timeout value to be used for each chunk.
(Haven't been able to make it work using select() for writing yet.) */
-if (!ok) ok = TRUE; else
+if ( !sx->ok
+ && (!(smtp_peer_options & OPTION_CHUNKING) || !pipelining_active))
{
+ /* Save the first address of the next batch. */
+ sx->first_addr = sx->next_addr;
+
+ sx->ok = TRUE;
+ }
+else
+ {
+ transport_ctx tctx = {
+ .u = {.fd = sx->cctx.sock}, /*XXX will this need TLS info? */
+ .tblock = tblock,
+ .addr = addrlist,
+ .check_string = US".",
+ .escape_string = US"..", /* Escaping strings */
+ .options =
+ topt_use_crlf | topt_escape_headers
+ | (tblock->body_only ? topt_no_headers : 0)
+ | (tblock->headers_only ? topt_no_body : 0)
+ | (tblock->return_path_add ? topt_add_return_path : 0)
+ | (tblock->delivery_date_add ? topt_add_delivery_date : 0)
+ | (tblock->envelope_to_add ? topt_add_envelope_to : 0)
+ };
+
+ /* If using CHUNKING we need a callback from the generic transport
+ support to us, for the sending of BDAT smtp commands and the reaping
+ of responses. The callback needs a whole bunch of state so set up
+ a transport-context structure to be passed around. */
+
+ if (smtp_peer_options & OPTION_CHUNKING)
+ {
+ tctx.check_string = tctx.escape_string = NULL;
+ tctx.options |= topt_use_bdat;
+ tctx.chunk_cb = smtp_chunk_cmd_callback;
+ sx->pending_BDAT = FALSE;
+ sx->good_RCPT = sx->ok;
+ sx->cmd_count = 0;
+ tctx.smtp_context = sx;
+ }
+ else
+ tctx.options |= topt_end_dot;
+
+ /* Save the first address of the next batch. */
+ sx->first_addr = sx->next_addr;
+
+ /* Responses from CHUNKING commands go in buffer. Otherwise,
+ there has not been a response. */
+
+ sx->buffer[0] = 0;
+
sigalrm_seen = FALSE;
transport_write_timeout = ob->data_timeout;
smtp_command = US"sending data block"; /* For error messages */
DEBUG(D_transport|D_v)
- debug_printf(" SMTP>> writing message and terminating \".\"\n");
+ if (smtp_peer_options & OPTION_CHUNKING)
+ debug_printf(" will write message using CHUNKING\n");
+ else
+ debug_printf(" SMTP>> (writing message)\n");
transport_count = 0;
#ifndef DISABLE_DKIM
- ok = dkim_transport_write_message(addrlist, inblock.sock,
- topt_use_crlf | topt_end_dot | topt_escape_headers |
- (tblock->body_only? topt_no_headers : 0) |
- (tblock->headers_only? topt_no_body : 0) |
- (tblock->return_path_add? topt_add_return_path : 0) |
- (tblock->delivery_date_add? topt_add_delivery_date : 0) |
- (tblock->envelope_to_add? topt_add_envelope_to : 0),
- 0, /* No size limit */
- tblock->add_headers, tblock->remove_headers,
- US".", US"..", /* Escaping strings */
- tblock->rewrite_rules, tblock->rewrite_existflags,
- ob->dkim_private_key, ob->dkim_domain, ob->dkim_selector,
- ob->dkim_canon, ob->dkim_strict, ob->dkim_sign_headers
- );
+ {
+# ifdef MEASURE_TIMING
+ struct timeval t0;
+ gettimeofday(&t0, NULL);
+# endif
+ dkim_exim_sign_init();
+# ifdef EXPERIMENTAL_ARC
+ {
+ uschar * s = ob->arc_sign;
+ if (s)
+ {
+ if (!(ob->dkim.arc_signspec = s = expand_string(s)))
+ {
+ if (!f.expand_string_forcedfail)
+ {
+ message = US"failed to expand arc_sign";
+ sx->ok = FALSE;
+ goto SEND_FAILED;
+ }
+ }
+ else if (*s)
+ {
+ /* Ask dkim code to hash the body for ARC */
+ (void) arc_ams_setup_sign_bodyhash();
+ ob->dkim.force_bodyhash = TRUE;
+ }
+ }
+ }
+# endif
+# ifdef MEASURE_TIMING
+ report_time_since(&t0, US"dkim_exim_sign_init (delta)");
+# endif
+ }
+#endif
+
+ /* See if we can pipeline QUIT. Reasons not to are
+ - pipelining not active
+ - not ok to send quit
+ - errors in amtp transation responses
+ - more addrs to send for this message or this host
+ - this message was being retried
+ - more messages for this host
+ If we can, we want the message-write to not flush (the tail end of) its data out. */
+
+ if ( sx->pipelining_used
+ && (sx->ok && sx->completed_addr || smtp_peer_options & OPTION_CHUNKING)
+ && sx->send_quit
+ && !(sx->first_addr || f.continue_more)
+ && f.deliver_firsttime
+ )
+ {
+ smtp_compare_t t_compare =
+ {.tblock = tblock, .current_sender_address = sender_address};
+
+ tcw_done = TRUE;
+ tcw =
+#ifndef DISABLE_TLS
+ ( tls_out.active.sock < 0 && !continue_proxy_cipher
+ || verify_check_given_host(CUSS &ob->hosts_nopass_tls, host) != OK
+ )
+ &&
+#endif
+ transport_check_waiting(tblock->name, host->name,
+ tblock->connection_max_messages, new_message_id,
+ (oicf)smtp_are_same_identities, (void*)&t_compare);
+ if (!tcw)
+ {
+ HDEBUG(D_transport) debug_printf("will pipeline QUIT\n");
+ tctx.options |= topt_no_flush;
+ }
+ }
+
+#ifndef DISABLE_DKIM
+ sx->ok = dkim_transport_write_message(&tctx, &ob->dkim, CUSS &message);
#else
- ok = transport_write_message(addrlist, inblock.sock,
- topt_use_crlf | topt_end_dot | topt_escape_headers |
- (tblock->body_only? topt_no_headers : 0) |
- (tblock->headers_only? topt_no_body : 0) |
- (tblock->return_path_add? topt_add_return_path : 0) |
- (tblock->delivery_date_add? topt_add_delivery_date : 0) |
- (tblock->envelope_to_add? topt_add_envelope_to : 0),
- 0, /* No size limit */
- tblock->add_headers, tblock->remove_headers,
- US".", US"..", /* Escaping strings */
- tblock->rewrite_rules, tblock->rewrite_existflags);
+ sx->ok = transport_write_message(&tctx, 0);
#endif
/* transport_write_message() uses write() because it is called from other
transport_write_timeout = 0; /* for subsequent transports */
/* Failure can either be some kind of I/O disaster (including timeout),
- or the failure of a transport filter or the expansion of added headers. */
+ or the failure of a transport filter or the expansion of added headers.
+ Or, when CHUNKING, it can be a protocol-detected failure. */
- if (!ok)
- {
- buffer[0] = 0; /* There hasn't been a response */
- goto RESPONSE_FAILED;
- }
+ if (!sx->ok)
+ if (message) goto SEND_FAILED;
+ else goto RESPONSE_FAILED;
/* We used to send the terminating "." explicitly here, but because of
buffering effects at both ends of TCP/IP connections, you don't gain
smtp_command = US"end of data";
+ /* If we can pipeline a QUIT with the data them send it now. If a new message
+ for this host appeared in the queue while data was being sent, we will not see
+ it and it will have to wait for a queue run. If there was one but another
+ thread took it, we might attempt to send it - but locking of spoolfiles will
+ detect that. Use _MORE to get QUIT in FIN segment. */
+
+ if (tcw_done && !tcw)
+ {
+ /*XXX jgh 2021/03/10 google et. al screwup. G, at least, sends TCP FIN in response to TLS
+ close-notify. Under TLS 1.3, violating RFC.
+ However, TLS 1.2 does not have half-close semantics. */
+
+ if ( sx->cctx.tls_ctx
+#if 0 && !defined(DISABLE_TLS)
+ && Ustrcmp(tls_out.ver, "TLS1.3") != 0
+#endif
+ || !f.deliver_firsttime
+ )
+ { /* Send QUIT now and not later */
+ (void)smtp_write_command(sx, SCMD_FLUSH, "QUIT\r\n");
+ sx->send_quit = FALSE;
+ }
+ else
+ { /* add QUIT to the output buffer */
+ (void)smtp_write_command(sx, SCMD_MORE, "QUIT\r\n");
+ sx->send_quit = FALSE; /* avoid sending it later */
+
+#ifndef DISABLE_TLS
+ if (sx->cctx.tls_ctx && sx->send_tlsclose) /* need to send TLS Close Notify */
+ {
+# ifdef EXIM_TCP_CORK /* Use _CORK to get Close Notify in FIN segment */
+ (void) setsockopt(sx->cctx.sock, IPPROTO_TCP, EXIM_TCP_CORK, US &on, sizeof(on));
+# endif
+ tls_shutdown_wr(sx->cctx.tls_ctx);
+ sx->send_tlsclose = FALSE; /* avoid later repeat */
+ }
+#endif
+ HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP(shutdown)>>\n");
+ shutdown(sx->cctx.sock, SHUT_WR); /* flush output buffer, with TCP FIN */
+ }
+ }
+
+ if (smtp_peer_options & OPTION_CHUNKING && sx->cmd_count > 1)
+ {
+ /* Reap any outstanding MAIL & RCPT commands, but not a DATA-go-ahead */
+ switch(sync_responses(sx, sx->cmd_count-1, 0))
+ {
+ case 3: sx->ok = TRUE; /* 2xx & 5xx => OK & progress made */
+ case 2: sx->completed_addr = TRUE; /* 5xx (only) => progress made */
+ break;
+
+ case 1: sx->ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
+ if (!sx->lmtp) sx->completed_addr = TRUE; /* can't tell about progress yet */
+ case 0: break; /* No 2xx or 5xx, but no probs */
+
+ case -1: goto END_OFF; /* Timeout on RCPT */
+
+#ifndef DISABLE_PIPE_CONNECT
+ case -5: /* TLS first-read error */
+ case -4: HDEBUG(D_transport)
+ debug_printf("failed reaping pipelined cmd responses\n");
+#endif
+ default: goto RESPONSE_FAILED; /* I/O error, or any MAIL/DATA error */
+ }
+ }
+
#ifndef DISABLE_PRDR
- /* For PRDR we optionally get a partial-responses warning
- * followed by the individual responses, before going on with
- * the overall response. If we don't get the warning then deal
- * with per non-PRDR. */
- if(prdr_active)
+ /* For PRDR we optionally get a partial-responses warning followed by the
+ individual responses, before going on with the overall response. If we don't
+ get the warning then deal with per non-PRDR. */
+
+ if(sx->prdr_active)
{
- ok = smtp_read_response(&inblock, buffer, sizeof(buffer), '3',
- ob->final_timeout);
- if (!ok && errno == 0)
- switch(buffer[0])
- {
- case '2': prdr_active = FALSE;
- ok = TRUE;
- break;
- case '4': errno = ERRNO_DATA4XX;
- addrlist->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
- break;
- }
+ sx->ok = smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '3', ob->final_timeout);
+ if (!sx->ok && errno == 0) switch(sx->buffer[0])
+ {
+ case '2': sx->prdr_active = FALSE;
+ sx->ok = TRUE;
+ break;
+ case '4': errno = ERRNO_DATA4XX;
+ addrlist->more_errno |=
+ ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
+ break;
+ }
}
else
#endif
/* For non-PRDR SMTP, we now read a single response that applies to the
whole message. If it is OK, then all the addresses have been delivered. */
- if (!lmtp)
+ if (!sx->lmtp)
{
- ok = smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
+ sx->ok = smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2',
ob->final_timeout);
- if (!ok && errno == 0 && buffer[0] == '4')
+ if (!sx->ok && errno == 0 && sx->buffer[0] == '4')
{
errno = ERRNO_DATA4XX;
- addrlist->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
+ addrlist->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
}
}
software before the spool gets updated. Also record the final SMTP
confirmation if needed (for SMTP only). */
- if (ok)
+ if (sx->ok)
{
int flag = '=';
- int delivery_time = (int)(time(NULL) - start_delivery_time);
+ struct timeval delivery_time;
int len;
- uschar *conf = NULL;
- send_rset = FALSE;
+ uschar * conf = NULL;
+
+ timesince(&delivery_time, &sx->delivery_start);
+ sx->send_rset = FALSE;
+ pipelining_active = FALSE;
/* Set up confirmation if needed - applies only to SMTP */
#ifdef DISABLE_EVENT
LOGGING(smtp_confirmation) &&
#endif
- !lmtp
+ !sx->lmtp
)
{
- const uschar *s = string_printing(buffer);
+ const uschar * s = string_printing(sx->buffer);
/* deconst cast ok here as string_printing was checked to have alloc'n'copied */
- conf = (s == buffer)? (uschar *)string_copy(s) : US s;
+ conf = s == sx->buffer ? US string_copy(s) : US s;
}
/* Process all transported addresses - for LMTP or PRDR, read a status for
- each one. */
+ each one. We used to drop out at first_addr, until someone returned a 452
+ followed by a 250... and we screwed up the accepted addresses. */
- for (addr = addrlist; addr != first_addr; addr = addr->next)
+ for (address_item * addr = addrlist; addr; addr = addr->next)
{
if (addr->transport_return != PENDING_OK) continue;
it doesn't get tried again too soon. */
#ifndef DISABLE_PRDR
- if (lmtp || prdr_active)
+ if (sx->lmtp || sx->prdr_active)
#else
- if (lmtp)
+ if (sx->lmtp)
#endif
{
- if (!smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
+ if (!smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2',
ob->final_timeout))
{
- if (errno != 0 || buffer[0] == 0) goto RESPONSE_FAILED;
+ if (errno != 0 || sx->buffer[0] == 0) goto RESPONSE_FAILED;
addr->message = string_sprintf(
#ifndef DISABLE_PRDR
- "%s error after %s: %s", prdr_active ? "PRDR":"LMTP",
+ "%s error after %s: %s", sx->prdr_active ? "PRDR":"LMTP",
#else
"LMTP error after %s: %s",
#endif
- big_buffer, string_printing(buffer));
+ data_command, string_printing(sx->buffer));
setflag(addr, af_pass_message); /* Allow message to go to user */
- if (buffer[0] == '5')
+ if (sx->buffer[0] == '5')
addr->transport_return = FAIL;
else
{
errno = ERRNO_DATA4XX;
- addr->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
+ addr->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
addr->transport_return = DEFER;
#ifndef DISABLE_PRDR
- if (!prdr_active)
+ if (!sx->prdr_active)
#endif
retry_add_item(addr, addr->address_retry_key, 0);
}
continue;
}
- completed_address = TRUE; /* NOW we can set this flag */
+ sx->completed_addr = TRUE; /* NOW we can set this flag */
if (LOGGING(smtp_confirmation))
{
- const uschar *s = string_printing(buffer);
+ const uschar *s = string_printing(sx->buffer);
/* deconst cast ok here as string_printing was checked to have alloc'n'copied */
- conf = (s == buffer)? (uschar *)string_copy(s) : US s;
+ conf = (s == sx->buffer) ? US string_copy(s) : US s;
}
}
actual host that was used. */
addr->transport_return = OK;
- addr->more_errno = delivery_time;
addr->host_used = host;
+ addr->delivery_time = delivery_time;
addr->special_action = flag;
addr->message = conf;
+
+ if (tcp_out_fastopen)
+ {
+ setflag(addr, af_tcp_fastopen_conn);
+ if (tcp_out_fastopen >= TFO_USED_NODATA) setflag(addr, af_tcp_fastopen);
+ if (tcp_out_fastopen >= TFO_USED_DATA) setflag(addr, af_tcp_fastopen_data);
+ }
+ if (sx->pipelining_used) setflag(addr, af_pipelining);
+#ifndef DISABLE_PIPE_CONNECT
+ if (sx->early_pipe_active) setflag(addr, af_early_pipe);
+#endif
#ifndef DISABLE_PRDR
- if (prdr_active) addr->flags |= af_prdr_used;
+ if (sx->prdr_active) setflag(addr, af_prdr_used);
#endif
+ if (smtp_peer_options & OPTION_CHUNKING) setflag(addr, af_chunking_used);
flag = '-';
#ifndef DISABLE_PRDR
- if (!prdr_active)
+ if (!sx->prdr_active)
#endif
{
/* Update the journal. For homonymic addresses, use the base address plus
write error, as it may prove possible to update the spool file later. */
if (testflag(addr, af_homonym))
- sprintf(CS buffer, "%.500s/%s\n", addr->unique + 3, tblock->name);
+ sprintf(CS sx->buffer, "%.500s/%s\n", addr->unique + 3, tblock->name);
else
- sprintf(CS buffer, "%.500s\n", addr->unique);
+ sprintf(CS sx->buffer, "%.500s\n", addr->unique);
- DEBUG(D_deliver) debug_printf("journalling %s\n", buffer);
- len = Ustrlen(CS buffer);
- if (write(journal_fd, buffer, len) != len)
+ DEBUG(D_deliver) debug_printf("S:journalling %s", sx->buffer);
+ len = Ustrlen(CS sx->buffer);
+ if (write(journal_fd, sx->buffer, len) != len)
log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for "
- "%s: %s", buffer, strerror(errno));
+ "%s: %s", sx->buffer, strerror(errno));
}
}
#ifndef DISABLE_PRDR
- if (prdr_active)
- {
- /* PRDR - get the final, overall response. For any non-success
- upgrade all the address statuses. */
- ok = smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
- ob->final_timeout);
- if (!ok)
+ if (sx->prdr_active)
+ {
+ const uschar * overall_message;
+
+ /* PRDR - get the final, overall response. For any non-success
+ upgrade all the address statuses. */
+
+ sx->ok = smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2',
+ ob->final_timeout);
+ if (!sx->ok)
+ {
+ if(errno == 0 && sx->buffer[0] == '4')
{
- if(errno == 0 && buffer[0] == '4')
- {
- errno = ERRNO_DATA4XX;
- addrlist->more_errno |= ((buffer[1] - '0')*10 + buffer[2] - '0') << 8;
- }
- for (addr = addrlist; addr != first_addr; addr = addr->next)
- if (buffer[0] == '5' || addr->transport_return == OK)
- addr->transport_return = PENDING_OK; /* allow set_errno action */
- goto RESPONSE_FAILED;
+ errno = ERRNO_DATA4XX;
+ addrlist->more_errno |= ((sx->buffer[1] - '0')*10 + sx->buffer[2] - '0') << 8;
}
+ for (address_item * addr = addrlist; addr != sx->first_addr; addr = addr->next)
+ if (sx->buffer[0] == '5' || addr->transport_return == OK)
+ addr->transport_return = PENDING_OK; /* allow set_errno action */
+ goto RESPONSE_FAILED;
+ }
- /* Update the journal, or setup retry. */
- for (addr = addrlist; addr != first_addr; addr = addr->next)
- if (addr->transport_return == OK)
- {
- if (testflag(addr, af_homonym))
- sprintf(CS buffer, "%.500s/%s\n", addr->unique + 3, tblock->name);
- else
- sprintf(CS buffer, "%.500s\n", addr->unique);
+ /* Append the overall response to the individual PRDR response for logging
+ and update the journal, or setup retry. */
- DEBUG(D_deliver) debug_printf("journalling(PRDR) %s\n", buffer);
- len = Ustrlen(CS buffer);
- if (write(journal_fd, buffer, len) != len)
- log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for "
- "%s: %s", buffer, strerror(errno));
+ overall_message = string_printing(sx->buffer);
+ for (address_item * addr = addrlist; addr != sx->first_addr; addr = addr->next)
+ if (addr->transport_return == OK)
+ addr->message = string_sprintf("%s\\n%s", addr->message, overall_message);
+
+ for (address_item * addr = addrlist; addr != sx->first_addr; addr = addr->next)
+ if (addr->transport_return == OK)
+ {
+ if (testflag(addr, af_homonym))
+ sprintf(CS sx->buffer, "%.500s/%s\n", addr->unique + 3, tblock->name);
+ else
+ sprintf(CS sx->buffer, "%.500s\n", addr->unique);
+
+ DEBUG(D_deliver) debug_printf("journalling(PRDR) %s\n", sx->buffer);
+ len = Ustrlen(CS sx->buffer);
+ if (write(journal_fd, sx->buffer, len) != len)
+ log_write(0, LOG_MAIN|LOG_PANIC, "failed to write journal for "
+ "%s: %s", sx->buffer, strerror(errno));
}
else if (addr->transport_return == DEFER)
- retry_add_item(addr, addr->address_retry_key, -2);
- }
+ /*XXX magic value -2 ? maybe host+message ? */
+ retry_add_item(addr, addr->address_retry_key, -2);
+ }
#endif
/* Ensure the journal file is pushed out to disk. */
here during the setting up phase (i.e. before MAIL FROM) then always defer, as
the problem is not related to this specific message. */
-if (!ok)
+if (!sx->ok)
{
int code, set_rc;
uschar * set_message;
{
save_errno = errno;
message = NULL;
- send_quit = check_response(host, &save_errno, addrlist->more_errno,
- buffer, &code, &message, &pass_message);
+ /* Clear send_quit flag if needed. Do not set. */
+ sx->send_quit &= check_response(host, &save_errno, addrlist->more_errno,
+ sx->buffer, &code, &message, &pass_message);
goto FAILED;
}
{
save_errno = errno;
code = '4';
- message = US string_sprintf("send() to %s [%s] failed: %s",
- host->name, host->address, strerror(save_errno));
- send_quit = FALSE;
+ message = string_sprintf("smtp send to %s [%s] failed: %s",
+ host->name, host->address, message ? message : US strerror(save_errno));
+ sx->send_quit = FALSE;
goto FAILED;
}
- /* This label is jumped to directly when a TLS negotiation has failed,
- or was not done for a host for which it is required. Values will be set
- in message and save_errno, and setting_up will always be true. Treat as
- a temporary error. */
-
-#ifdef SUPPORT_TLS
- TLS_FAILED:
- code = '4';
-#endif
-
- /* If the failure happened while setting up the call, see if the failure was
- a 5xx response (this will either be on connection, or following HELO - a 5xx
- after EHLO causes it to try HELO). If so, fail all addresses, as this host is
- never going to accept them. For other errors during setting up (timeouts or
- whatever), defer all addresses, and yield DEFER, so that the host is not
- tried again for a while. */
-
FAILED:
- ok = FALSE; /* For when reached by GOTO */
- set_message = message;
-
- if (setting_up)
{
- if (code == '5')
- set_rc = FAIL;
- else
- yield = set_rc = DEFER;
- }
+ BOOL message_error;
+
+ sx->ok = FALSE; /* For when reached by GOTO */
+ set_message = message;
/* We want to handle timeouts after MAIL or "." and loss of connection after
"." specially. They can indicate a problem with the sender address or with
cases are treated in the same way as a 4xx response. This next bit of code
does the classification. */
- else
- {
- BOOL message_error;
-
switch(save_errno)
{
-#ifdef SUPPORT_I18N
- case ERRNO_UTF8_FWD:
- code = '5';
- /*FALLTHROUGH*/
-#endif
case 0:
case ERRNO_MAIL4XX:
case ERRNO_DATA4XX:
message_error = Ustrncmp(smtp_command,"end ",4) == 0;
break;
+#ifndef DISABLE_DKIM
+ case EACCES:
+ /* DKIM signing failure: avoid thinking we pipelined quit,
+ just abandon the message and close the socket. */
+
+ message_error = FALSE;
+# ifndef DISABLE_TLS
+ if (sx->cctx.tls_ctx)
+ {
+ tls_close(sx->cctx.tls_ctx,
+ sx->send_tlsclose ? TLS_SHUTDOWN_WAIT : TLS_SHUTDOWN_WONLY);
+ sx->cctx.tls_ctx = NULL;
+ }
+# endif
+ break;
+#endif
default:
message_error = FALSE;
break;
set_rc = DEFER;
if (save_errno > 0)
message = US string_sprintf("%s: %s", message, strerror(save_errno));
- if (host->next != NULL) log_write(0, LOG_MAIN, "%s", message);
- msglog_line(host, message);
+
+ write_logs(host, message, sx->first_addr ? sx->first_addr->basic_errno : 0);
+
*message_defer = TRUE;
}
+#ifdef TIOCOUTQ
+ DEBUG(D_transport) if (sx->cctx.sock >= 0)
+ {
+ int n;
+ if (ioctl(sx->cctx.sock, TIOCOUTQ, &n) == 0)
+ debug_printf("%d bytes remain in socket output buffer\n", n);
+ }
+#endif
}
-
/* Otherwise, we have an I/O error or a timeout other than after MAIL or
".", or some other transportation error. We defer all addresses and yield
DEFER, except for the case of failed add_headers expansion, or a transport
else
{
+#ifndef DISABLE_PIPE_CONNECT
+ /* If we were early-pipelinng and the actual EHLO response did not match
+ the cached value we assumed, we could have detected it and passed a
+ custom errno through to here. It would be nice to RSET and retry right
+ away, but to reliably do that we eould need an extra synch point before
+ we committed to data and that would discard half the gained roundrips.
+ Or we could summarily drop the TCP connection. but that is also ugly.
+ Instead, we ignore the possibility (having freshened the cache) and rely
+ on the server telling us with a nonmessage error if we have tried to
+ do something it no longer supports. */
+#endif
set_rc = DEFER;
yield = (save_errno == ERRNO_CHHEADER_FAIL ||
- save_errno == ERRNO_FILTER_FAIL)? ERROR : DEFER;
+ save_errno == ERRNO_FILTER_FAIL) ? ERROR : DEFER;
}
}
- set_errno(addrlist, save_errno, set_message, set_rc, pass_message, host
+ set_errno(addrlist, save_errno, set_message, set_rc, pass_message, host,
#ifdef EXPERIMENTAL_DSN_INFO
- , smtp_greeting, helo_response
+ sx->smtp_greeting, sx->helo_response,
#endif
- );
+ &sx->delivery_start);
}
-
/* If all has gone well, send_quit will be set TRUE, implying we can end the
SMTP session tidily. However, if there were too many addresses to send in one
message (indicated by first_addr being non-NULL) we want to carry on with the
many as to hit the configured limit. The function transport_check_waiting looks
for a waiting message and returns its id. Then transport_pass_socket tries to
set up a continued delivery by passing the socket on to another process. The
-variable send_rset is FALSE if a message has just been successfully transfered.
+variable send_rset is FALSE if a message has just been successfully transferred.
If we are already sending down a continued channel, there may be further
addresses not yet delivered that are aimed at the same host, but which have not
DEBUG(D_transport)
debug_printf("ok=%d send_quit=%d send_rset=%d continue_more=%d "
- "yield=%d first_address is %sNULL\n", ok, send_quit, send_rset,
- continue_more, yield, (first_addr == NULL)? "":"not ");
-
-if (completed_address && ok && send_quit)
- {
- BOOL more;
- smtp_compare_t t_compare;
+ "yield=%d first_address is %sNULL\n", sx->ok, sx->send_quit,
+ sx->send_rset, f.continue_more, yield, sx->first_addr ? "not " : "");
- t_compare.tblock = tblock;
- t_compare.current_sender_address = sender_address;
-
- if ( first_addr != NULL
- || continue_more
- || ( ( tls_out.active < 0
- || verify_check_given_host(&ob->hosts_nopass_tls, host) != OK
- )
- &&
- transport_check_waiting(tblock->name, host->name,
- tblock->connection_max_messages, new_message_id, &more,
- (oicf)smtp_are_same_identities, (void*)&t_compare)
- ) )
+if (sx->completed_addr && sx->ok && sx->send_quit)
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+ if (mail_limit = continue_sequence >= sx->max_mail)
{
- uschar *msg;
- BOOL pass_message;
-
- if (send_rset)
+ DEBUG(D_transport)
+ debug_printf("reached limit %u for MAILs per conn\n", sx->max_mail);
+ }
+ else
+#endif
+ {
+ smtp_compare_t t_compare =
+ {.tblock = tblock, .current_sender_address = sender_address};
+
+ if ( sx->first_addr /* more addrs for this message */
+ || f.continue_more /* more addrs for continued-host */
+ || tcw_done && tcw /* more messages for host */
+ || (
+#ifndef DISABLE_TLS
+ ( tls_out.active.sock < 0 && !continue_proxy_cipher
+ || verify_check_given_host(CUSS &ob->hosts_nopass_tls, host) != OK
+ )
+ &&
+#endif
+ transport_check_waiting(tblock->name, host->name,
+ sx->max_mail, new_message_id,
+ (oicf)smtp_are_same_identities, (void*)&t_compare)
+ ) )
{
- if (! (ok = smtp_write_command(&outblock, FALSE, "RSET\r\n") >= 0))
- {
- msg = US string_sprintf("send() to %s [%s] failed: %s", host->name,
- host->address, strerror(save_errno));
- send_quit = FALSE;
- }
- else if (! (ok = smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
- ob->command_timeout)))
- {
- int code;
- send_quit = check_response(host, &errno, 0, buffer, &code, &msg,
- &pass_message);
- if (!send_quit)
- {
- DEBUG(D_transport) debug_printf("H=%s [%s] %s\n",
- host->name, host->address, msg);
- }
- }
- }
+ uschar *msg;
+ BOOL pass_message;
- /* Either RSET was not needed, or it succeeded */
-
- if (ok)
- {
- if (first_addr != NULL) /* More addresses still to be sent */
- { /* in this run of the transport */
- continue_sequence++; /* Causes * in logging */
- goto SEND_MESSAGE;
- }
- if (continue_more) return yield; /* More addresses for another run */
+ if (sx->send_rset)
+ if (! (sx->ok = smtp_write_command(sx, SCMD_FLUSH, "RSET\r\n") >= 0))
+ {
+ msg = US string_sprintf("smtp send to %s [%s] failed: %s", host->name,
+ host->address, strerror(errno));
+ sx->send_quit = FALSE;
+ }
+ else if (! (sx->ok = smtp_read_response(sx, sx->buffer, sizeof(sx->buffer),
+ '2', ob->command_timeout)))
+ {
+ int code;
+ sx->send_quit = check_response(host, &errno, 0, sx->buffer, &code, &msg,
+ &pass_message);
+ if (!sx->send_quit)
+ {
+ DEBUG(D_transport) debug_printf("H=%s [%s] %s\n",
+ host->name, host->address, msg);
+ }
+ }
- /* Pass the socket to a new Exim process. Before doing so, we must shut
- down TLS. Not all MTAs allow for the continuation of the SMTP session
- when TLS is shut down. We test for this by sending a new EHLO. If we
- don't get a good response, we don't attempt to pass the socket on. */
+ /* Either RSET was not needed, or it succeeded */
-#ifdef SUPPORT_TLS
- if (tls_out.active >= 0)
- {
- tls_close(FALSE, TRUE);
- if (smtps)
- ok = FALSE;
- else
- ok = smtp_write_command(&outblock,FALSE,"EHLO %s\r\n",helo_data) >= 0 &&
- smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
- ob->command_timeout);
- }
+ if (sx->ok)
+ {
+#ifndef DISABLE_TLS
+ int pfd[2];
#endif
+ int socket_fd = sx->cctx.sock;
+
+ if (sx->first_addr) /* More addresses still to be sent */
+ { /* for this message */
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+ /* Any that we marked as skipped, reset to do now */
+ for (address_item * a = sx->first_addr; a; a = a->next)
+ if (a->transport_return == SKIP)
+ a->transport_return = PENDING_DEFER;
+#endif
+ continue_sequence++; /* for consistency */
+ clearflag(sx->first_addr, af_new_conn);
+ setflag(sx->first_addr, af_cont_conn); /* Causes * in logging */
+ pipelining_active = sx->pipelining_used; /* was cleared at DATA */
+ goto SEND_MESSAGE;
+ }
- /* If the socket is successfully passed, we musn't send QUIT (or
- indeed anything!) from here. */
-
-/*XXX DSN_INFO: assume likely to do new HELO; but for greet we'll want to
-propagate it from the initial
-*/
- if (ok && transport_pass_socket(tblock->name, host->name, host->address,
- new_message_id, inblock.sock))
- {
- send_quit = FALSE;
- }
- }
-
- /* If RSET failed and there are addresses left, they get deferred. */
+ /* Unless caller said it already has more messages listed for this host,
+ pass the connection on to a new Exim process (below, the call to
+ transport_pass_socket). If the caller has more ready, just return with
+ the connection still open. */
+
+#ifndef DISABLE_TLS
+ if (tls_out.active.sock >= 0)
+ if ( f.continue_more
+ || verify_check_given_host(CUSS &ob->hosts_noproxy_tls, host) == OK)
+ {
+ /* Before passing the socket on, or returning to caller with it still
+ open, we must shut down TLS. Not all MTAs allow for the continuation
+ of the SMTP session when TLS is shut down. We test for this by sending
+ a new EHLO. If we don't get a good response, we don't attempt to pass
+ the socket on.
+ NB: TLS close is *required* per RFC 9266 when tls-exporter info has
+ been used, which we do under TLSv1.3 for the gsasl SCRAM*PLUS methods.
+ But we were always doing it anyway. */
+
+ tls_close(sx->cctx.tls_ctx,
+ sx->send_tlsclose ? TLS_SHUTDOWN_WAIT : TLS_SHUTDOWN_WONLY);
+ sx->send_tlsclose = FALSE;
+ sx->cctx.tls_ctx = NULL;
+ tls_out.active.sock = -1;
+ smtp_peer_options = smtp_peer_options_wrap;
+ sx->ok = !sx->smtps
+ && smtp_write_command(sx, SCMD_FLUSH, "EHLO %s\r\n", sx->helo_data)
+ >= 0
+ && smtp_read_response(sx, sx->buffer, sizeof(sx->buffer),
+ '2', ob->command_timeout);
+
+ if (sx->ok && f.continue_more)
+ goto TIDYUP; /* More addresses for another run */
+ }
+ else
+ {
+ /* Set up a pipe for proxying TLS for the new transport process */
+
+ smtp_peer_options |= OPTION_TLS;
+ if ((sx->ok = socketpair(AF_UNIX, SOCK_STREAM, 0, pfd) == 0))
+ socket_fd = pfd[1];
+ else
+ set_errno(sx->first_addr, errno, US"internal allocation problem",
+ DEFER, FALSE, host,
+# ifdef EXPERIMENTAL_DSN_INFO
+ sx->smtp_greeting, sx->helo_response,
+# endif
+ &sx->delivery_start);
+ }
+ else
+#endif
+ if (f.continue_more)
+ goto TIDYUP; /* More addresses for another run */
+
+ /* If the socket is successfully passed, we mustn't send QUIT (or
+ indeed anything!) from here. */
+
+ /*XXX DSN_INFO: assume likely to do new HELO; but for greet we'll want to
+ propagate it from the initial
+ */
+ if (sx->ok && transport_pass_socket(tblock->name, host->name,
+ host->address, new_message_id, socket_fd
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+ , sx->peer_limit_mail, sx->peer_limit_rcpt, sx->peer_limit_rcptdom
+#endif
+ ))
+ {
+ sx->send_quit = FALSE;
+
+ /* We have passed the client socket to a fresh transport process.
+ If TLS is still active, we need to proxy it for the transport we
+ just passed the baton to. Fork a child to to do it, and return to
+ get logging done asap. Which way to place the work makes assumptions
+ about post-fork prioritisation which may not hold on all platforms. */
+#ifndef DISABLE_TLS
+ if (tls_out.active.sock >= 0)
+ {
+ int pid = exim_fork(US"tls-proxy-interproc");
+ if (pid == 0) /* child; fork again to disconnect totally */
+ {
+ /* does not return */
+ smtp_proxy_tls(sx->cctx.tls_ctx, sx->buffer, sizeof(sx->buffer), pfd,
+ ob->command_timeout, host->name);
+ }
+
+ if (pid > 0) /* parent */
+ {
+ close(pfd[0]);
+ /* tidy the inter-proc to disconn the proxy proc */
+ waitpid(pid, NULL, 0);
+ tls_close(sx->cctx.tls_ctx, TLS_NO_SHUTDOWN);
+ sx->cctx.tls_ctx = NULL;
+ (void)close(sx->cctx.sock);
+ sx->cctx.sock = -1;
+ continue_transport = NULL;
+ continue_hostname = NULL;
+ goto TIDYUP;
+ }
+ log_write(0, LOG_PANIC_DIE, "fork failed");
+ }
+#endif
+ }
+ }
- else set_errno(first_addr, errno, msg, DEFER, FALSE, host
+ /* If RSET failed and there are addresses left, they get deferred. */
+ else
+ set_errno(sx->first_addr, errno, msg, DEFER, FALSE, host,
#ifdef EXPERIMENTAL_DSN_INFO
- , smtp_greeting, helo_response
+ sx->smtp_greeting, sx->helo_response,
#endif
- );
+ &sx->delivery_start);
+ }
}
- }
/* End off tidily with QUIT unless the connection has died or the socket has
-been passed to another process. There has been discussion on the net about what
-to do after sending QUIT. The wording of the RFC suggests that it is necessary
-to wait for a response, but on the other hand, there isn't anything one can do
-with an error response, other than log it. Exim used to do that. However,
-further discussion suggested that it is positively advantageous not to wait for
-the response, but to close the session immediately. This is supposed to move
-the TCP/IP TIME_WAIT state from the server to the client, thereby removing some
-load from the server. (Hosts that are both servers and clients may not see much
-difference, of course.) Further discussion indicated that this was safe to do
-on Unix systems which have decent implementations of TCP/IP that leave the
-connection around for a while (TIME_WAIT) after the application has gone away.
-This enables the response sent by the server to be properly ACKed rather than
-timed out, as can happen on broken TCP/IP implementations on other OS.
-
-This change is being made on 31-Jul-98. After over a year of trouble-free
-operation, the old commented-out code was removed on 17-Sep-99. */
+been passed to another process. */
SEND_QUIT:
-if (send_quit) (void)smtp_write_command(&outblock, FALSE, "QUIT\r\n");
+if (sx->send_quit)
+ { /* Use _MORE to get QUIT in FIN segment */
+ (void)smtp_write_command(sx, SCMD_MORE, "QUIT\r\n");
+#ifndef DISABLE_TLS
+ if (sx->cctx.tls_ctx && sx->send_tlsclose)
+ {
+# ifdef EXIM_TCP_CORK /* Use _CORK to get TLS Close Notify in FIN segment */
+ (void) setsockopt(sx->cctx.sock, IPPROTO_TCP, EXIM_TCP_CORK, US &on, sizeof(on));
+# endif
+ tls_shutdown_wr(sx->cctx.tls_ctx);
+ sx->send_tlsclose = FALSE;
+ }
+#endif
+ }
END_OFF:
-#ifdef SUPPORT_TLS
-tls_close(FALSE, TRUE);
-#endif
-
/* Close the socket, and return the appropriate value, first setting
works because the NULL setting is passed back to the calling process, and
remote_max_parallel is forced to 1 when delivering over an existing connection,
specified in the transports, and therefore not visible at top level, in which
case continue_more won't get set. */
-HDEBUG(D_transport|D_acl|D_v) debug_printf(" SMTP(close)>>\n");
-(void)close(inblock.sock);
+if (sx->send_quit)
+ {
+ /* This flushes data queued in the socket, being the QUIT and any TLS Close,
+ sending them along with the client FIN flag. Us (we hope) sending FIN first
+ means we (client) take the TIME_WAIT state, so the server (which likely has a
+ higher connection rate) does not have to. */
-#ifndef DISABLE_EVENT
-(void) event_raise(tblock->event_action, US"tcp:close", NULL);
+ HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP(shutdown)>>\n");
+ shutdown(sx->cctx.sock, SHUT_WR);
+ }
+
+if (sx->send_quit || tcw_done && !tcw)
+ {
+ /* Wait for (we hope) ack of our QUIT, and a server FIN. Discard any data
+ received, then discard the socket. Any packet received after then, or receive
+ data still in the socket, will get a RST - hence the pause/drain. */
+
+ /* Reap the response to QUIT, timing out after one second */
+ (void) smtp_read_response(sx, sx->buffer, sizeof(sx->buffer), '2', 1);
+#ifndef DISABLE_TLS
+ if (sx->cctx.tls_ctx)
+ {
+ int n;
+
+ /* Reap the TLS Close Notify from the server, timing out after one second */
+ sigalrm_seen = FALSE;
+ ALARM(1);
+ do
+ n = tls_read(sx->cctx.tls_ctx, sx->inbuffer, sizeof(sx->inbuffer));
+ while (!sigalrm_seen && n > 0);
+ ALARM_CLR(0);
+
+ if (sx->send_tlsclose)
+ {
+# ifdef EXIM_TCP_CORK
+ (void) setsockopt(sx->cctx.sock, IPPROTO_TCP, EXIM_TCP_CORK, US &on, sizeof(on));
+# endif
+ tls_close(sx->cctx.tls_ctx, TLS_SHUTDOWN_WAIT);
+ }
+ else
+ tls_close(sx->cctx.tls_ctx, TLS_SHUTDOWN_WONLY);
+ sx->cctx.tls_ctx = NULL;
+ }
#endif
+ /* Drain any trailing data from the socket before close, to avoid sending a RST */
+
+ if ( poll_one_fd(sx->cctx.sock, POLLIN, 20) != 0 /* 20ms */
+ && fcntl(sx->cctx.sock, F_SETFL, O_NONBLOCK) == 0)
+ for (int i = 16, n; /* drain socket */
+ (n = read(sx->cctx.sock, sx->inbuffer, sizeof(sx->inbuffer))) > 0 && i > 0;
+ i--) HDEBUG(D_transport|D_acl|D_v)
+ {
+ int m = MIN(n, 64);
+ debug_printf_indent(" SMTP(drain %d bytes)<< %.*s\n", n, m, sx->inbuffer);
+ for (m = 0; m < n; m++)
+ debug_printf("0x%02x\n", sx->inbuffer[m]);
+ }
+ }
+HDEBUG(D_transport|D_acl|D_v) debug_printf_indent(" SMTP(close)>>\n");
+(void)close(sx->cctx.sock);
+sx->cctx.sock = -1;
continue_transport = NULL;
continue_hostname = NULL;
+smtp_debug_cmd_report();
+
+#ifndef DISABLE_EVENT
+(void) event_raise(tblock->event_action, US"tcp:close", NULL, NULL);
+#endif
+
+#ifdef SUPPORT_DANE
+if (dane_held)
+ {
+ sx->first_addr = NULL;
+ for (address_item * a = sx->addrlist->next; a; a = a->next)
+ if (a->transport_return == DANE)
+ {
+ a->transport_return = PENDING_DEFER;
+ if (!sx->first_addr)
+ {
+ /* Remember the new start-point in the addrlist, for smtp_setup_conn()
+ to get the domain string for SNI */
+
+ sx->first_addr = a;
+ clearflag(a, af_cont_conn);
+ setflag(a, af_new_conn); /* clear * from logging */
+ DEBUG(D_transport) debug_printf("DANE: go-around for %s\n", a->domain);
+ }
+ }
+ continue_sequence = 1; /* for consistency */
+ goto REPEAT_CONN;
+ }
+#endif
+
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+if (mail_limit && sx->first_addr)
+ {
+ /* Reset the sequence count since we closed the connection. This is flagged
+ on the pipe back to the delivery process so that a non-continued-conn delivery
+ is logged. */
+
+ continue_sequence = 1; /* for consistency */
+ clearflag(sx->first_addr, af_cont_conn);
+ setflag(sx->first_addr, af_new_conn); /* clear * from logging */
+ goto REPEAT_CONN;
+ }
+#endif
+
+return yield;
+
+TIDYUP:
+#ifdef SUPPORT_DANE
+if (dane_held) for (address_item * a = sx->addrlist->next; a; a = a->next)
+ if (a->transport_return == DANE)
+ a->transport_return = PENDING_DEFER;
+#endif
return yield;
}
void
smtp_transport_closedown(transport_instance *tblock)
{
-smtp_transport_options_block *ob =
- (smtp_transport_options_block *)(tblock->options_block);
-smtp_inblock inblock;
-smtp_outblock outblock;
+smtp_transport_options_block * ob = SOB tblock->options_block;
+client_conn_ctx cctx;
+smtp_context sx;
uschar buffer[256];
uschar inbuffer[4096];
uschar outbuffer[16];
-inblock.sock = fileno(stdin);
-inblock.buffer = inbuffer;
-inblock.buffersize = sizeof(inbuffer);
-inblock.ptr = inbuffer;
-inblock.ptrend = inbuffer;
-
-outblock.sock = inblock.sock;
-outblock.buffersize = sizeof(outbuffer);
-outblock.buffer = outbuffer;
-outblock.ptr = outbuffer;
-outblock.cmd_count = 0;
-outblock.authenticating = FALSE;
-
-(void)smtp_write_command(&outblock, FALSE, "QUIT\r\n");
-(void)smtp_read_response(&inblock, buffer, sizeof(buffer), '2',
- ob->command_timeout);
-(void)close(inblock.sock);
+/*XXX really we need an active-smtp-client ctx, rather than assuming stdout */
+cctx.sock = fileno(stdin);
+cctx.tls_ctx = cctx.sock == tls_out.active.sock ? tls_out.active.tls_ctx : NULL;
+
+sx.inblock.cctx = &cctx;
+sx.inblock.buffer = inbuffer;
+sx.inblock.buffersize = sizeof(inbuffer);
+sx.inblock.ptr = inbuffer;
+sx.inblock.ptrend = inbuffer;
+
+sx.outblock.cctx = &cctx;
+sx.outblock.buffersize = sizeof(outbuffer);
+sx.outblock.buffer = outbuffer;
+sx.outblock.ptr = outbuffer;
+sx.outblock.cmd_count = 0;
+sx.outblock.authenticating = FALSE;
+
+(void)smtp_write_command(&sx, SCMD_FLUSH, "QUIT\r\n");
+(void)smtp_read_response(&sx, buffer, sizeof(buffer), '2', ob->command_timeout);
+(void)close(cctx.sock);
}
prepare_addresses(address_item *addrlist, host_item *host)
{
address_item *first_addr = NULL;
-address_item *addr;
-for (addr = addrlist; addr != NULL; addr = addr->next)
+for (address_item * addr = addrlist; addr; addr = addr->next)
if (addr->transport_return == DEFER)
{
- if (first_addr == NULL) first_addr = addr;
+ if (!first_addr) first_addr = addr;
addr->transport_return = PENDING_DEFER;
addr->basic_errno = 0;
addr->more_errno = (host->mx >= 0)? 'M' : 'A';
addr->message = NULL;
-#ifdef SUPPORT_TLS
+#ifndef DISABLE_TLS
addr->cipher = NULL;
addr->ourcert = NULL;
addr->peercert = NULL;
addr->peerdn = NULL;
addr->ocsp = OCSP_NOT_REQ;
+ addr->tlsver = NULL;
#endif
#ifdef EXPERIMENTAL_DSN_INFO
addr->smtp_greeting = NULL;
transport_instance *tblock, /* data for this instantiation */
address_item *addrlist) /* addresses we are working on */
{
-int cutoff_retry;
-int port;
+int defport;
int hosts_defer = 0;
int hosts_fail = 0;
int hosts_looked_up = 0;
int hosts_serial = 0;
int hosts_total = 0;
int total_hosts_tried = 0;
-address_item *addr;
BOOL expired = TRUE;
-BOOL continuing = continue_hostname != NULL;
uschar *expanded_hosts = NULL;
uschar *pistring;
uschar *tid = string_sprintf("%s transport", tblock->name);
-smtp_transport_options_block *ob =
- (smtp_transport_options_block *)(tblock->options_block);
+smtp_transport_options_block *ob = SOB tblock->options_block;
host_item *hostlist = addrlist->host_list;
host_item *host = NULL;
DEBUG(D_transport)
{
debug_printf("%s transport entered\n", tblock->name);
- for (addr = addrlist; addr != NULL; addr = addr->next)
+ for (address_item * addr = addrlist; addr; addr = addr->next)
debug_printf(" %s\n", addr->address);
- if (continuing) debug_printf("already connected to %s [%s]\n",
- continue_hostname, continue_host_address);
+ if (hostlist)
+ {
+ debug_printf("hostlist:\n");
+ for (host_item * host = hostlist; host; host = host->next)
+ debug_printf(" '%s' IP %s port %d\n", host->name, host->address, host->port);
+ }
+ if (continue_hostname)
+ debug_printf("already connected to %s [%s] (on fd %d)\n",
+ continue_hostname, continue_host_address,
+ cutthrough.cctx.sock >= 0 ? cutthrough.cctx.sock : 0);
+ }
+
+/* Check the restrictions on line length */
+
+if (max_received_linelength > ob->message_linelength_limit)
+ {
+ struct timeval now;
+ gettimeofday(&now, NULL);
+
+ for (address_item * addr = addrlist; addr; addr = addr->next)
+ if (addr->transport_return == DEFER)
+ addr->transport_return = PENDING_DEFER;
+
+ set_errno_nohost(addrlist, ERRNO_SMTPFORMAT,
+ US"message has lines too long for transport", FAIL, TRUE, &now);
+ goto END_TRANSPORT;
}
/* Set the flag requesting that these hosts be added to the waiting
a host list with hosts_override set, use the host list supplied with the
transport. It is an error for this not to exist. */
-if (hostlist == NULL || (ob->hosts_override && ob->hosts != NULL))
+if (!hostlist || (ob->hosts_override && ob->hosts))
{
- if (ob->hosts == NULL)
+ if (!ob->hosts)
{
addrlist->message = string_sprintf("%s transport called with no hosts set",
tblock->name);
as the hosts string will never be used again, it doesn't matter that we
replace all the : characters with zeros. */
- if (ob->hostlist == NULL)
+ if (!ob->hostlist)
{
uschar *s = ob->hosts;
- if (Ustrchr(s, '$') != NULL)
+ if (Ustrchr(s, '$'))
{
if (!(expanded_hosts = expand_string(s)))
{
addrlist->message = string_sprintf("failed to expand list of hosts "
"\"%s\" in %s transport: %s", s, tblock->name, expand_string_message);
- addrlist->transport_return = search_find_defer? DEFER : PANIC;
+ addrlist->transport_return = f.search_find_defer ? DEFER : PANIC;
return FALSE; /* Only top address has status */
}
DEBUG(D_transport) debug_printf("expanded list of hosts \"%s\" to "
else
if (ob->hosts_randomize) s = expanded_hosts = string_copy(s);
+ if (is_tainted(s))
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "attempt to use tainted host list '%s' from '%s' in transport %s",
+ s, ob->hosts, tblock->name);
+ /* Avoid leaking info to an attacker */
+ addrlist->message = US"internal configuration error";
+ addrlist->transport_return = PANIC;
+ return FALSE;
+ }
+
host_build_hostlist(&hostlist, s, ob->hosts_randomize);
/* Check that the expansion yielded something useful. */
- if (hostlist == NULL)
+ if (!hostlist)
{
addrlist->message =
string_sprintf("%s transport has empty hosts setting", tblock->name);
already been randomized (but don't bother if continuing down an existing
connection). */
-else if (ob->hosts_randomize && hostlist->mx == MX_NONE && !continuing)
+else if (ob->hosts_randomize && hostlist->mx == MX_NONE && !continue_hostname)
{
host_item *newlist = NULL;
- while (hostlist != NULL)
+ while (hostlist)
{
host_item *h = hostlist;
hostlist = hostlist->next;
h->sort_key = random_number(100);
- if (newlist == NULL)
+ if (!newlist)
{
h->next = NULL;
newlist = h;
else
{
host_item *hh = newlist;
- while (hh->next != NULL)
+ while (hh->next)
{
if (h->sort_key < hh->next->sort_key) break;
hh = hh->next;
/* Sort out the default port. */
-if (!smtp_get_port(ob->port, addrlist, &port, tid)) return FALSE;
+if (!smtp_get_port(ob->port, addrlist, &defport, tid)) return FALSE;
/* For each host-plus-IP-address on the list:
time. After that, set the status and error data for any addresses that haven't
had it set already. */
-for (cutoff_retry = 0; expired &&
- cutoff_retry < ((ob->delay_after_cutoff)? 1 : 2);
+for (int cutoff_retry = 0;
+ expired && cutoff_retry < (ob->delay_after_cutoff ? 1 : 2);
cutoff_retry++)
{
host_item *nexthost = NULL;
int unexpired_hosts_tried = 0;
+ BOOL continue_host_tried = FALSE;
+retry_non_continued:
for (host = hostlist;
- host != NULL &&
- unexpired_hosts_tried < ob->hosts_max_try &&
- total_hosts_tried < ob->hosts_max_try_hardlimit;
+ host
+ && unexpired_hosts_tried < ob->hosts_max_try
+ && total_hosts_tried < ob->hosts_max_try_hardlimit;
host = nexthost)
{
int rc;
int host_af;
- uschar *rs;
- BOOL serialized = FALSE;
BOOL host_is_expired = FALSE;
BOOL message_defer = FALSE;
BOOL some_deferred = FALSE;
uschar *retry_message_key = NULL;
uschar *serialize_key = NULL;
+ /* Deal slightly better with a possible Linux kernel bug that results
+ in intermittent TFO-conn fails deep into the TCP flow. Bug 2907 tracks.
+ Hack: Clear TFO option for any further hosts on this tpt run. */
+
+ if (total_hosts_tried > 0)
+ {
+ DEBUG(D_transport|D_acl|D_v)
+ debug_printf("Clearing TFO as not first host for message\n");
+ ob->hosts_try_fastopen = US"";
+ }
+
/* Default next host is next host. :-) But this can vary if the
hosts_max_try limit is hit (see below). It may also be reset if a host
address is looked up here (in case the host was multihomed). */
Note that we mustn't skip unusable hosts if the address is not unset; they
may be needed as expired hosts on the 2nd time round the cutoff loop. */
- if (host->address == NULL)
+ if (!host->address)
{
int new_port, flags;
- host_item *hh;
if (host->status >= hstatus_unusable)
{
/* Find by name if so configured, or if it's an IP address. We don't
just copy the IP address, because we need the test-for-local to happen. */
- flags = HOST_FIND_BY_A;
+ flags = HOST_FIND_BY_A | HOST_FIND_BY_AAAA;
if (ob->dns_qualify_single) flags |= HOST_FIND_QUALIFY_SINGLE;
if (ob->dns_search_parents) flags |= HOST_FIND_SEARCH_PARENTS;
/* Update the host (and any additional blocks, resulting from
multihoming) with a host-specific port, if any. */
- for (hh = host; hh != nexthost; hh = hh->next) hh->port = new_port;
+ for (host_item * hh = host; hh != nexthost; hh = hh->next) hh->port = new_port;
/* Failure to find the host at this time (usually DNS temporary failure)
is really a kind of routing failure rather than a transport failure.
commonly points to a configuration error, but the best action is still
to carry on for the next host. */
- if (rc == HOST_FIND_AGAIN || rc == HOST_FIND_FAILED)
+ if (rc == HOST_FIND_AGAIN || rc == HOST_FIND_SECURITY || rc == HOST_FIND_FAILED)
{
retry_add_item(addrlist, string_sprintf("R:%s", host->name), 0);
expired = FALSE;
"HOST_FIND_AGAIN" : "HOST_FIND_FAILED", host->name);
host->status = hstatus_unusable;
- for (addr = addrlist; addr != NULL; addr = addr->next)
+ for (address_item * addr = addrlist; addr; addr = addr->next)
{
if (addr->transport_return != DEFER) continue;
addr->basic_errno = ERRNO_UNKNOWNHOST;
- addr->message =
- string_sprintf("failed to lookup IP address for %s", host->name);
+ addr->message = string_sprintf(
+ rc == HOST_FIND_SECURITY
+ ? "lookup of IP address for %s was insecure"
+ : "failed to lookup IP address for %s",
+ host->name);
}
continue;
}
if (rc == HOST_FOUND_LOCAL && !ob->allow_localhost)
{
- for (addr = addrlist; addr != NULL; addr = addr->next)
+ for (address_item * addr = addrlist; addr; addr = addr->next)
{
- addr->basic_errno = 0;
+ addr->basic_errno = ERRNO_HOST_IS_LOCAL;
addr->message = string_sprintf("%s transport found host %s to be "
"local", tblock->name, host->name);
}
result of the lookup. Set expired FALSE, to save the outer loop executing
twice. */
- if (continuing && (Ustrcmp(continue_hostname, host->name) != 0 ||
- Ustrcmp(continue_host_address, host->address) != 0))
- {
- expired = FALSE;
- continue; /* With next host */
- }
+ if (continue_hostname)
+ if ( Ustrcmp(continue_hostname, host->name) != 0
+ || Ustrcmp(continue_host_address, host->address) != 0
+ )
+ {
+ expired = FALSE;
+ continue; /* With next host */
+ }
+ else
+ continue_host_tried = TRUE;
/* Reset the default next host in case a multihomed host whose addresses
are not looked up till just above added to the host list. */
were not in it. We don't want to hold up all SMTP deliveries! Except when
doing a two-stage queue run, don't do this if forcing. */
- if ((!deliver_force || queue_2stage) && (queue_smtp ||
- match_isinlist(addrlist->domain,
- (const uschar **)&queue_smtp_domains, 0,
- &domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL) == OK))
+ if ( (!f.deliver_force || f.queue_2stage)
+ && ( f.queue_smtp
+ || match_isinlist(addrlist->domain,
+ CUSS &queue_smtp_domains, 0,
+ &domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL) == OK)
+ )
{
+ DEBUG(D_transport) debug_printf("first-pass routing only\n");
expired = FALSE;
- for (addr = addrlist; addr != NULL; addr = addr->next)
- {
- if (addr->transport_return != DEFER) continue;
- addr->message = US"domain matches queue_smtp_domains, or -odqs set";
- }
+ for (address_item * addr = addrlist; addr; addr = addr->next)
+ if (addr->transport_return == DEFER)
+ addr->message = US"first-pass only routing due to -odqs, "
+ "queue_smtp_domains or control=queue";
continue; /* With next host */
}
the standard SMTP port. A host may have its own port setting that overrides
the default. */
- pistring = string_sprintf(":%d", (host->port == PORT_NONE)?
- port : host->port);
+ pistring = string_sprintf(":%d", host->port == PORT_NONE
+ ? defport : host->port);
if (Ustrcmp(pistring, ":25") == 0) pistring = US"";
/* Select IPv4 or IPv6, and choose an outgoing interface. If the interface
because connections to the same host from a different interface should be
treated separately. */
- host_af = (Ustrchr(host->address, ':') == NULL)? AF_INET : AF_INET6;
- if ((rs = ob->interface) && *rs)
+ host_af = Ustrchr(host->address, ':') ? AF_INET6 : AF_INET;
{
- if (!smtp_get_interface(rs, host_af, addrlist, &interface, tid))
- return FALSE;
- pistring = string_sprintf("%s/%s", pistring, interface);
+ uschar * s = ob->interface;
+ if (s && *s)
+ {
+ if (!smtp_get_interface(s, host_af, addrlist, &interface, tid))
+ return FALSE;
+ pistring = string_sprintf("%s/%s", pistring, interface);
+ }
}
/* The first time round the outer loop, check the status of the host by
host_is_expired = retry_check_address(addrlist->domain, host, pistring,
incl_ip, &retry_host_key, &retry_message_key);
- DEBUG(D_transport) debug_printf("%s [%s]%s status = %s\n", host->name,
- (host->address == NULL)? US"" : host->address, pistring,
- (host->status == hstatus_usable)? "usable" :
- (host->status == hstatus_unusable)? "unusable" :
- (host->status == hstatus_unusable_expired)? "unusable (expired)" : "?");
+ DEBUG(D_transport) debug_printf("%s [%s]%s retry-status = %s\n", host->name,
+ host->address ? host->address : US"", pistring,
+ host->status == hstatus_usable ? "usable"
+ : host->status == hstatus_unusable ? "unusable"
+ : host->status == hstatus_unusable_expired ? "unusable (expired)" : "?");
/* Skip this address if not usable at this time, noting if it wasn't
actually expired, both locally and in the address. */
switch (host->status)
{
case hstatus_unusable:
- expired = FALSE;
- setflag(addrlist, af_retry_skipped);
- /* Fall through */
+ expired = FALSE;
+ setflag(addrlist, af_retry_skipped);
+ /* Fall through */
case hstatus_unusable_expired:
- switch (host->why)
- {
- case hwhy_retry: hosts_retry++; break;
- case hwhy_failed: hosts_fail++; break;
- case hwhy_deferred: hosts_defer++; break;
- }
-
- /* If there was a retry message key, implying that previously there
- was a message-specific defer, we don't want to update the list of
- messages waiting for these hosts. */
-
- if (retry_message_key != NULL) update_waiting = FALSE;
- continue; /* With the next host or IP address */
+ switch (host->why)
+ {
+ case hwhy_retry: hosts_retry++; break;
+ case hwhy_failed: hosts_fail++; break;
+ case hwhy_insecure:
+ case hwhy_deferred: hosts_defer++; break;
+ }
+
+ /* If there was a retry message key, implying that previously there
+ was a message-specific defer, we don't want to update the list of
+ messages waiting for these hosts. */
+
+ if (retry_message_key) update_waiting = FALSE;
+ continue; /* With the next host or IP address */
}
}
else
{
- if (host->address == NULL ||
- host->status != hstatus_unusable_expired ||
- host->last_try > received_time)
+ if ( !host->address
+ || host->status != hstatus_unusable_expired
+ || host->last_try > received_time.tv_sec)
continue;
- DEBUG(D_transport)
- debug_printf("trying expired host %s [%s]%s\n",
+ DEBUG(D_transport) debug_printf("trying expired host %s [%s]%s\n",
host->name, host->address, pistring);
host_is_expired = TRUE;
}
and remember this for later deletion. Do not do any of this if we are
sending the message down a pre-existing connection. */
- if (!continuing &&
- verify_check_given_host(&ob->serialize_hosts, host) == OK)
+ if ( !continue_hostname
+ && verify_check_given_host(CUSS &ob->serialize_hosts, host) == OK)
{
serialize_key = string_sprintf("host-serialize-%s", host->name);
if (!enq_start(serialize_key, 1))
hosts_serial++;
continue;
}
- serialized = TRUE;
}
/* OK, we have an IP address that is not waiting for its retry time to
DEBUG(D_transport) debug_printf("delivering %s to %s [%s] (%s%s)\n",
message_id, host->name, host->address, addrlist->address,
- (addrlist->next == NULL)? "" : ", ...");
+ addrlist->next ? ", ..." : "");
- set_process_info("delivering %s to %s [%s] (%s%s)",
- message_id, host->name, host->address, addrlist->address,
- (addrlist->next == NULL)? "" : ", ...");
+ set_process_info("delivering %s to %s [%s]%s (%s%s)",
+ message_id, host->name, host->address, pistring, addrlist->address,
+ addrlist->next ? ", ..." : "");
/* This is not for real; don't do the delivery. If there are
any remaining hosts, list them. */
- if (dont_deliver)
+ if (f.dont_deliver)
{
- host_item *host2;
- set_errno_nohost(addrlist, 0, NULL, OK, FALSE);
- for (addr = addrlist; addr != NULL; addr = addr->next)
+ struct timeval now;
+ gettimeofday(&now, NULL);
+ set_errno_nohost(addrlist, 0, NULL, OK, FALSE, &now);
+ for (address_item * addr = addrlist; addr; addr = addr->next)
{
addr->host_used = host;
addr->special_action = '*';
{
debug_printf("*** delivery by %s transport bypassed by -N option\n"
"*** host and remaining hosts:\n", tblock->name);
- for (host2 = host; host2 != NULL; host2 = host2->next)
+ for (host_item * host2 = host; host2; host2 = host2->next)
debug_printf(" %s [%s]\n", host2->name,
- (host2->address == NULL)? US"unset" : host2->address);
+ host2->address ? host2->address : US"unset");
}
rc = OK;
}
if (expanded_hosts)
{
- thost = store_get(sizeof(host_item));
+ thost = store_get(sizeof(host_item), GET_UNTAINTED);
*thost = *host;
thost->name = string_copy(host->name);
thost->address = string_copy(host->address);
if (!host_is_expired && ++unexpired_hosts_tried >= ob->hosts_max_try)
{
- host_item *h;
DEBUG(D_transport)
debug_printf("hosts_max_try limit reached with this host\n");
- for (h = host; h; h = h->next) if (h->mx != host->mx)
+ for (host_item * h = host; h; h = h->next) if (h->mx != host->mx)
{
nexthost = h;
unexpired_hosts_tried--;
/* Attempt the delivery. */
total_hosts_tried++;
- rc = smtp_deliver(addrlist, thost, host_af, port, interface, tblock,
+ rc = smtp_deliver(addrlist, thost, host_af, defport, interface, tblock,
&message_defer, FALSE);
/* Yield is one of:
failures, where the log has already been written. If all hosts defer a
general message is written at the end. */
- if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL &&
- first_addr->basic_errno != ERRNO_TLSFAILURE)
- write_logs(first_addr, host);
+ if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL
+ && first_addr->basic_errno != ERRNO_TLSFAILURE)
+ write_logs(host, first_addr->message, first_addr->basic_errno);
#ifndef DISABLE_EVENT
if (rc == DEFER)
- deferred_event_raise(first_addr, host);
+ deferred_event_raise(first_addr, host, US"msg:host:defer");
#endif
/* If STARTTLS was accepted, but there was a failure in setting up the
session, so the in-clear transmission after those errors, if permitted,
happens inside smtp_deliver().] */
-#ifdef SUPPORT_TLS
+#ifndef DISABLE_TLS
if ( rc == DEFER
&& first_addr->basic_errno == ERRNO_TLSFAILURE
&& ob->tls_tempfail_tryclear
- && verify_check_given_host(&ob->hosts_require_tls, host) != OK
+ && verify_check_given_host(CUSS &ob->hosts_require_tls, host) != OK
)
{
- log_write(0, LOG_MAIN, "TLS session failure: delivering unencrypted "
- "to %s [%s] (not in hosts_require_tls)", host->name, host->address);
+ log_write(0, LOG_MAIN,
+ "%s: delivering unencrypted to H=%s [%s] (not in hosts_require_tls)",
+ first_addr->message, host->name, host->address);
first_addr = prepare_addresses(addrlist, host);
- rc = smtp_deliver(addrlist, thost, host_af, port, interface, tblock,
+ rc = smtp_deliver(addrlist, thost, host_af, defport, interface, tblock,
&message_defer, TRUE);
if (rc == DEFER && first_addr->basic_errno != ERRNO_AUTHFAIL)
- write_logs(first_addr, host);
+ write_logs(host, first_addr->message, first_addr->basic_errno);
# ifndef DISABLE_EVENT
- if (rc == DEFER)
- deferred_event_raise(first_addr, host);
+ if (rc == DEFER)
+ deferred_event_raise(first_addr, host, US"msg:host:defer");
# endif
}
-#endif /*SUPPORT_TLS*/
+#endif /*DISABLE_TLS*/
+
+#ifndef DISABLE_EVENT
+ /* If the last host gave a defer raise a per-message event */
+
+ if ( !( nexthost
+ && unexpired_hosts_tried < ob->hosts_max_try
+ && total_hosts_tried < ob->hosts_max_try_hardlimit
+ )
+ && (message_defer || rc == DEFER)
+ )
+ deferred_event_raise(first_addr, host, US"msg:defer");
+#endif
}
/* Delivery attempt finished */
- rs = (rc == OK)? US"OK" : (rc == DEFER)? US"DEFER" : (rc == ERROR)?
- US"ERROR" : US"?";
-
- set_process_info("delivering %s: just tried %s [%s] for %s%s: result %s",
- message_id, host->name, host->address, addrlist->address,
- (addrlist->next == NULL)? "" : " (& others)", rs);
+ set_process_info("delivering %s: just tried %s [%s]%s for %s%s: result %s",
+ message_id, host->name, host->address, pistring, addrlist->address,
+ addrlist->next ? " (& others)" : "", rc_to_string(rc));
/* Release serialization if set up */
- if (serialized) enq_end(serialize_key);
+ if (serialize_key) enq_end(serialize_key);
/* If the result is DEFER, or if a host retry record is known to exist, we
need to add an item to the retry chain for updating the retry database
the unusable tree at the outer level, so even if different address blocks
contain the same address, it still won't get tried again.) */
- if (rc == DEFER || retry_host_key != NULL)
+ if (rc == DEFER || retry_host_key)
{
- int delete_flag = (rc != DEFER)? rf_delete : 0;
- if (retry_host_key == NULL)
+ int delete_flag = rc != DEFER ? rf_delete : 0;
+ if (!retry_host_key)
{
BOOL incl_ip;
if (exp_bool(addrlist, US"transport", tblock->name, D_transport,
ob->expand_retry_include_ip_address, &incl_ip) != OK)
incl_ip = TRUE; /* error; use most-specific retry record */
- retry_host_key = incl_ip ?
- string_sprintf("T:%S:%s%s", host->name, host->address, pistring) :
- string_sprintf("T:%S%s", host->name, pistring);
+ retry_host_key = incl_ip
+ ? string_sprintf("T:%S:%s%s", host->name, host->address, pistring)
+ : string_sprintf("T:%S%s", host->name, pistring);
}
/* If a delivery of another message over an existing SMTP connection
host is genuinely down, another non-continued message delivery will
notice it soon enough. */
- if (delete_flag != 0 || !continuing)
+ if (delete_flag != 0 || !continue_hostname)
retry_add_item(first_addr, retry_host_key, rf_host | delete_flag);
/* We may have tried an expired host, if its retry time has come; ensure
if (rc == DEFER)
{
- host->status = (host_is_expired)?
- hstatus_unusable_expired : hstatus_unusable;
+ host->status = host_is_expired
+ ? hstatus_unusable_expired : hstatus_unusable;
host->why = hwhy_deferred;
}
}
reasonable. Also, stop the message from being remembered as waiting
for specific hosts. */
- if (message_defer || retry_message_key != NULL)
+ if (message_defer || retry_message_key)
{
- int delete_flag = message_defer? 0 : rf_delete;
- if (retry_message_key == NULL)
+ int delete_flag = message_defer ? 0 : rf_delete;
+ if (!retry_message_key)
{
BOOL incl_ip;
if (exp_bool(addrlist, US"transport", tblock->name, D_transport,
ob->expand_retry_include_ip_address, &incl_ip) != OK)
incl_ip = TRUE; /* error; use most-specific retry record */
- retry_message_key = incl_ip ?
- string_sprintf("T:%S:%s%s:%s", host->name, host->address, pistring,
- message_id) :
- string_sprintf("T:%S%s:%s", host->name, pistring, message_id);
+ retry_message_key = incl_ip
+ ? string_sprintf("T:%S:%s%s:%s", host->name, host->address, pistring,
+ message_id)
+ : string_sprintf("T:%S%s:%s", host->name, pistring, message_id);
}
retry_add_item(addrlist, retry_message_key,
rf_message | rf_host | delete_flag);
case, see if any of them are deferred. */
if (rc == OK)
- for (addr = addrlist; addr; addr = addr->next)
+ for (address_item * addr = addrlist; addr; addr = addr->next)
if (addr->transport_return == DEFER)
{
some_deferred = TRUE;
case when we were trying to deliver down an existing channel and failed.
Don't try any other hosts in this case. */
- if (continuing) break;
+ if (continue_hostname) break;
/* If the whole delivery, or some individual addresses, were deferred and
there are more hosts that could be tried, do not count this host towards
important because if we don't try all hosts, the address will never time
out. NOTE: this does not apply to hosts_max_try_hardlimit. */
- if ((rc == DEFER || some_deferred) && nexthost != NULL)
+ if ((rc == DEFER || some_deferred) && nexthost)
{
BOOL timedout;
retry_config *retry = retry_find_config(host->name, NULL, 0, 0);
- if (retry != NULL && retry->rules != NULL)
+ if (retry && retry->rules)
{
retry_rule *last_rule;
for (last_rule = retry->rules;
- last_rule->next != NULL;
+ last_rule->next;
last_rule = last_rule->next);
- timedout = time(NULL) - received_time > last_rule->timeout;
+ timedout = time(NULL) - received_time.tv_sec > last_rule->timeout;
}
else timedout = TRUE; /* No rule => timed out */
"hosts_max_try (message older than host's retry time)\n");
}
}
+
+ DEBUG(D_transport)
+ {
+ if (unexpired_hosts_tried >= ob->hosts_max_try)
+ debug_printf("reached transport hosts_max_try limit %d\n",
+ ob->hosts_max_try);
+ if (total_hosts_tried >= ob->hosts_max_try_hardlimit)
+ debug_printf("reached transport hosts_max_try_hardlimit limit %d\n",
+ ob->hosts_max_try_hardlimit);
+ }
+
+ testharness_pause_ms(500); /* let server debug out */
} /* End of loop for trying multiple hosts. */
+ /* If we failed to find a matching host in the list, for an already-open
+ connection, just close it and start over with the list. This can happen
+ for routing that changes from run to run, or big multi-IP sites with
+ round-robin DNS. */
+
+ if (continue_hostname && !continue_host_tried)
+ {
+ int fd = cutthrough.cctx.sock >= 0 ? cutthrough.cctx.sock : 0;
+
+ DEBUG(D_transport) debug_printf("no hosts match already-open connection\n");
+#ifndef DISABLE_TLS
+ /* A TLS conn could be open for a cutthrough, but not for a plain continued-
+ transport */
+/*XXX doublecheck that! */
+
+ if (cutthrough.cctx.sock >= 0 && cutthrough.is_tls)
+ {
+ (void) tls_write(cutthrough.cctx.tls_ctx, US"QUIT\r\n", 6, FALSE);
+ tls_close(cutthrough.cctx.tls_ctx, TLS_SHUTDOWN_NOWAIT);
+ cutthrough.cctx.tls_ctx = NULL;
+ cutthrough.is_tls = FALSE;
+ }
+ else
+#else
+ (void) write(fd, US"QUIT\r\n", 6);
+#endif
+ (void) close(fd);
+ cutthrough.cctx.sock = -1;
+ continue_hostname = NULL;
+ goto retry_non_continued;
+ }
+
/* This is the end of the loop that repeats iff expired is TRUE and
ob->delay_after_cutoff is FALSE. The second time round we will
try those hosts that haven't been tried since the message arrived. */
if (mua_wrapper)
{
- for (addr = addrlist; addr != NULL; addr = addr->next)
+ for (address_item * addr = addrlist; addr; addr = addr->next)
addr->transport_return = FAIL;
goto END_TRANSPORT;
}
down an existing TCP/IP connection, and something caused the host not to be
found, we end up here, but can detect these cases and handle them specially. */
-for (addr = addrlist; addr; addr = addr->next)
+for (address_item * addr = addrlist; addr; addr = addr->next)
{
/* If host is not NULL, it means that we stopped processing the host list
because of hosts_max_try or hosts_max_try_hardlimit. In the former case, this
setflag(addr, af_retry_skipped);
}
- if (queue_smtp) /* no deliveries attempted */
+ if (f.queue_smtp) /* no deliveries attempted */
{
addr->transport_return = DEFER;
addr->basic_errno = 0;
return TRUE; /* Each address has its status */
}
+#endif /*!MACRO_PREDEF*/
/* vi: aw ai sw=2
*/
/* End of transport/smtp.c */
git://git.exim.org / exim.git / blobdiff