+. ////////////////////////////////////////////////////////////////////////////
+. ////////////////////////////////////////////////////////////////////////////
+
+.chapter "Support for DKIM (DomainKeys Identified Mail)" "CHAPdkim" &&&
+ "DKIM Support"
+.cindex "DKIM"
+
+DKIM is a mechanism by which messages sent by some entity can be provably
+linked to a domain which that entity controls. It permits reputation to
+be tracked on a per-domain basis, rather than merely upon source IP address.
+DKIM is documented in RFC 4871.
+
+Since version 4.70, DKIM support is compiled into Exim by default. It can be
+disabled by setting DISABLE_DKIM=yes in Local/Makefile.
+
+Exim's DKIM implementation allows to
+.olist
+Sign outgoing messages: This function is implemented in the SMTP transport.
+It can co-exist with all other Exim features, including transport filters.
+.next
+Verify signatures in incoming messages: This is implemented by an additional
+ACL (acl_smtp_dkim), which can be called several times per message, with
+different signature contexts.
+.endlist
+
+In typical Exim style, the verification implementation does not include any
+default "policy". Instead it enables you to build your own policy using
+Exim's standard controls.
+
+Please note that verification of DKIM signatures in incoming mail is turned
+on by default for logging purposes. For each signature in incoming email,
+exim will log a line displaying the most important signature details, and the
+signature status. Here is an example (with line-breaks added for clarity):
+.code
+2009-09-09 10:22:28 1MlIRf-0003LU-U3 DKIM:
+ d=facebookmail.com s=q1-2009b
+ c=relaxed/relaxed a=rsa-sha1
+ i=@facebookmail.com t=1252484542 [verification succeeded]
+.endd
+You might want to turn off DKIM verification processing entirely for internal
+or relay mail sources. To do that, set the &%dkim_disable_verify%& ACL
+control modifier. This should typically be done in the RCPT ACL, at points
+where you accept mail from relay sources (internal hosts or authenticated
+senders).
+
+
+.section "Signing outgoing messages" "SECID513"
+.cindex "DKIM" "signing"
+
+Signing is implemented by setting private options on the SMTP transport.
+These options take (expandable) strings as arguments.
+
+.option dkim_domain smtp string&!! unset
+MANDATORY:
+The domain you want to sign with. The result of this expanded
+option is put into the &%$dkim_domain%& expansion variable.
+
+.option dkim_selector smtp string&!! unset
+MANDATORY:
+This sets the key selector string. You can use the &%$dkim_domain%& expansion
+variable to look up a matching selector. The result is put in the expansion
+variable &%$dkim_selector%& which should be used in the &%dkim_private_key%&
+option along with &%$dkim_domain%&.
+
+.option dkim_private_key smtp string&!! unset
+MANDATORY:
+This sets the private key to use. You can use the &%$dkim_domain%& and
+&%$dkim_selector%& expansion variables to determine the private key to use.
+The result can either
+.ilist
+be a valid RSA private key in ASCII armor, including line breaks.
+.next
+start with a slash, in which case it is treated as a file that contains
+the private key.
+.next
+be "0", "false" or the empty string, in which case the message will not
+be signed. This case will not result in an error, even if &%dkim_strict%&
+is set.
+.endlist
+
+.option dkim_canon smtp string&!! unset
+OPTIONAL:
+This option sets the canonicalization method used when signing a message.
+The DKIM RFC currently supports two methods: "simple" and "relaxed".
+The option defaults to "relaxed" when unset. Note: the current implementation
+only supports using the same canonicalization method for both headers and body.
+
+.option dkim_strict smtp string&!! unset
+OPTIONAL:
+This option defines how Exim behaves when signing a message that
+should be signed fails for some reason. When the expansion evaluates to
+either "1" or "true", Exim will defer. Otherwise Exim will send the message
+unsigned. You can use the &%$dkim_domain%& and &%$dkim_selector%& expansion
+variables here.
+
+.option dkim_sign_headers smtp string&!! unset
+OPTIONAL:
+When set, this option must expand to (or be specified as) a colon-separated
+list of header names. Headers with these names will be included in the message
+signature. When unspecified, the header names recommended in RFC4871 will be
+used.
+
+
+.section "Verifying DKIM signatures in incoming mail" "SECID514"
+.cindex "DKIM" "verification"
+
+Verification of DKIM signatures in incoming email is implemented via the
+&%acl_smtp_dkim%& ACL. By default, this ACL is called once for each
+syntactically(!) correct signature in the incoming message.
+
+To evaluate the signature in the ACL a large number of expansion variables
+containing the signature status and its details are set up during the
+runtime of the ACL.
+
+Calling the ACL only for existing signatures is not sufficient to build
+more advanced policies. For that reason, the global option
+&%dkim_verify_signers%&, and a global expansion variable
+&%$dkim_signers%& exist.
+
+The global option &%dkim_verify_signers%& can be set to a colon-separated
+list of DKIM domains or identities for which the ACL &%acl_smtp_dkim%& is
+called. It is expanded when the message has been received. At this point,
+the expansion variable &%$dkim_signers%& already contains a colon-separated
+list of signer domains and identities for the message. When
+&%dkim_verify_signers%& is not specified in the main configuration,
+it defaults as:
+.code
+dkim_verify_signers = $dkim_signers
+.endd
+This leads to the default behaviour of calling &%acl_smtp_dkim%& for each
+DKIM signature in the message. Current DKIM verifiers may want to explicitly
+call the ACL for known domains or identities. This would be achieved as follows:
+.code
+dkim_verify_signers = paypal.com:ebay.com:$dkim_signers
+.endd
+This would result in &%acl_smtp_dkim%& always being called for "paypal.com"
+and "ebay.com", plus all domains and identities that have signatures in the message.
+You can also be more creative in constructing your policy. For example:
+.code
+dkim_verify_signers = $sender_address_domain:$dkim_signers
+.endd
+
+If a domain or identity is listed several times in the (expanded) value of
+&%dkim_verify_signers%&, the ACL is only called once for that domain or identity.
+
+
+Inside the &%acl_smtp_dkim%&, the following expansion variables are
+available (from most to least important):
+
+
+.vlist
+.vitem &%$dkim_cur_signer%&
+The signer that is being evaluated in this ACL run. This can be a domain or
+an identity. This is one of the list items from the expanded main option
+&%dkim_verify_signers%& (see above).
+.vitem &%$dkim_verify_status%&
+A string describing the general status of the signature. One of
+.ilist
+&%none%&: There is no signature in the message for the current domain or
+identity (as reflected by &%$dkim_cur_signer%&).
+.next
+&%invalid%&: The signature could not be verified due to a processing error.
+More detail is available in &%$dkim_verify_reason%&.
+.next
+&%fail%&: Verification of the signature failed. More detail is
+available in &%$dkim_verify_reason%&.
+.next
+&%pass%&: The signature passed verification. It is valid.
+.endlist
+.vitem &%$dkim_verify_reason%&
+A string giving a litte bit more detail when &%$dkim_verify_status%& is either
+"fail" or "invalid". One of
+.ilist
+&%pubkey_unavailable%& (when &%$dkim_verify_status%&="invalid"): The public
+key for the domain could not be retrieved. This may be a temporary problem.
+.next
+&%pubkey_syntax%& (when &%$dkim_verify_status%&="invalid"): The public key
+record for the domain is syntactically invalid.
+.next
+&%bodyhash_mismatch%& (when &%$dkim_verify_status%&="fail"): The calculated
+body hash does not match the one specified in the signature header. This
+means that the message body was modified in transit.
+.next
+&%signature_incorrect%& (when &%$dkim_verify_status%&="fail"): The signature
+could not be verified. This may mean that headers were modified,
+re-written or otherwise changed in a way which is incompatible with
+DKIM verification. It may of course also mean that the signature is forged.
+.endlist
+.vitem &%$dkim_domain%&
+The signing domain. IMPORTANT: This variable is only populated if there is
+an actual signature in the message for the current domain or identity (as
+reflected by &%$dkim_cur_signer%&).
+.vitem &%$dkim_identity%&
+The signing identity, if present. IMPORTANT: This variable is only populated
+if there is an actual signature in the message for the current domain or
+identity (as reflected by &%$dkim_cur_signer%&).
+.vitem &%$dkim_selector%&
+The key record selector string.
+.vitem &%$dkim_algo%&
+The algorithm used. One of 'rsa-sha1' or 'rsa-sha256'.
+.vitem &%$dkim_canon_body%&
+The body canonicalization method. One of 'relaxed' or 'simple'.
+.vitem &%dkim_canon_headers%&
+The header canonicalization method. One of 'relaxed' or 'simple'.
+.vitem &%$dkim_copiedheaders%&
+A transcript of headers and their values which are included in the signature
+(copied from the 'z=' tag of the signature).
+.vitem &%$dkim_bodylength%&
+The number of signed body bytes. If zero ("0"), the body is unsigned. If no
+limit was set by the signer, "9999999999999" is returned. This makes sure
+that this variable always expands to an integer value.
+.vitem &%$dkim_created%&
+UNIX timestamp reflecting the date and time when the signature was created.
+When this was not specified by the signer, "0" is returned.
+.vitem &%$dkim_expires%&
+UNIX timestamp reflecting the date and time when the signer wants the
+signature to be treated as "expired". When this was not specified by the
+signer, "9999999999999" is returned. This makes it possible to do useful
+integer size comparisons against this value.
+.vitem &%$dkim_headernames%&
+A colon-separated list of names of headers included in the signature.
+.vitem &%$dkim_key_testing%&
+"1" if the key record has the "testing" flag set, "0" if not.
+.vitem &%$nosubdomains%&
+"1" if the key record forbids subdomaining, "0" otherwise.
+.vitem &%$dkim_key_srvtype%&
+Service type (tag s=) from the key record. Defaults to "*" if not specified
+in the key record.
+.vitem &%$dkim_key_granularity%&
+Key granularity (tag g=) from the key record. Defaults to "*" if not specified
+in the key record.
+.vitem &%$dkim_key_notes%&
+Notes from the key record (tag n=).
+.endlist
+
+In addition, two ACL conditions are provided:
+
+.vlist
+.vitem &%dkim_signers%&
+ACL condition that checks a colon-separated list of domains or identities
+for a match against the domain or identity that the ACL is currently verifying
+(reflected by &%$dkim_cur_signer%&). This is typically used to restrict an ACL
+verb to a group of domains or identities. For example:
git://git.exim.org / exim.git / blobdiff