* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2016 */
+/* Copyright (c) The Exim Maintainers 2020 - 2022 */
+/* Copyright (c) University of Cambridge 1995 - 2018 */
/* See the file NOTICE for conditions of use and distribution. */
+/* SPDX-License-Identifier: GPL-2.0-only */
/* Functions for handling an incoming SMTP call. */
we need room to handle large base64-encoded AUTHs for GSSAPI.
*/
-#define smtp_cmd_buffer_size 16384
+#define SMTP_CMD_BUFFER_SIZE 16384
/* Size of buffer for reading SMTP incoming packets */
-#define in_buffer_size 8192
+#define IN_BUFFER_SIZE 8192
/* Structure for SMTP command list */
* Local static variables *
*************************************************/
-static auth_instance *authenticated_by;
-static BOOL auth_advertised;
-#ifdef SUPPORT_TLS
-static BOOL tls_advertised;
+static struct {
+ BOOL auth_advertised :1;
+#ifndef DISABLE_TLS
+ BOOL tls_advertised :1;
#endif
-static BOOL dsn_advertised;
-static BOOL esmtp;
-static BOOL helo_required = FALSE;
-static BOOL helo_verify = FALSE;
-static BOOL helo_seen;
-static BOOL helo_accept_junk;
-static BOOL count_nonmail;
-static BOOL pipelining_advertised;
-static BOOL rcpt_smtp_response_same;
-static BOOL rcpt_in_progress;
-static int nonmail_command_count;
-static BOOL smtp_exit_function_called = 0;
+ BOOL dsn_advertised :1;
+ BOOL esmtp :1;
+ BOOL helo_verify_required :1;
+ BOOL helo_verify :1;
+ BOOL helo_seen :1;
+ BOOL helo_accept_junk :1;
+#ifndef DISABLE_PIPE_CONNECT
+ BOOL pipe_connect_acceptable :1;
+#endif
+ BOOL rcpt_smtp_response_same :1;
+ BOOL rcpt_in_progress :1;
+ BOOL smtp_exit_function_called :1;
#ifdef SUPPORT_I18N
-static BOOL smtputf8_advertised;
+ BOOL smtputf8_advertised :1;
#endif
+} fl = {
+ .helo_verify_required = FALSE,
+ .helo_verify = FALSE,
+ .smtp_exit_function_called = FALSE,
+};
+
+static auth_instance *authenticated_by;
+static int count_nonmail;
+static int nonmail_command_count;
static int synprot_error_count;
static int unknown_command_count;
static int sync_cmd_limit;
{ "helo", sizeof("helo")-1, HELO_CMD, TRUE, FALSE },
{ "ehlo", sizeof("ehlo")-1, EHLO_CMD, TRUE, FALSE },
{ "auth", sizeof("auth")-1, AUTH_CMD, TRUE, TRUE },
- #ifdef SUPPORT_TLS
+#ifndef DISABLE_TLS
{ "starttls", sizeof("starttls")-1, STARTTLS_CMD, FALSE, FALSE },
- { "tls_auth", 0, TLS_AUTH_CMD, FALSE, TRUE },
- #endif
+ { "tls_auth", 0, TLS_AUTH_CMD, FALSE, FALSE },
+#endif
/* If you change anything above here, also fix the definitions below. */
/* This list of names is used for performing the smtp_no_mail logging action.
It must be kept in step with the SCH_xxx enumerations. */
-static uschar *smtp_names[] =
+uschar * smtp_names[] =
{
US"NONE", US"AUTH", US"DATA", US"BDAT", US"EHLO", US"ETRN", US"EXPN",
US"HELO", US"HELP", US"MAIL", US"NOOP", US"QUIT", US"RCPT", US"RSET",
/* forward declarations */
-int bdat_ungetc(int ch);
-static int smtp_read_command(BOOL check_sync);
+static int smtp_read_command(BOOL check_sync, unsigned buffer_lim);
static int synprot_error(int type, int code, uschar *data, uschar *errmess);
static void smtp_quit_handler(uschar **, uschar **);
static void smtp_rset_handler(void);
-/*************************************************
-* Recheck synchronization *
-*************************************************/
-
-/* Synchronization checks can never be perfect because a packet may be on its
-way but not arrived when the check is done. Such checks can in any case only be
-done when TLS is not in use. Normally, the checks happen when commands are
-read: Exim ensures that there is no more input in the input buffer. In normal
-cases, the response to the command will be fast, and there is no further check.
-
-However, for some commands an ACL is run, and that can include delays. In those
-cases, it is useful to do another check on the input just before sending the
-response. This also applies at the start of a connection. This function does
-that check by means of the select() function, as long as the facility is not
-disabled or inappropriate. A failure of select() is ignored.
-
-When there is unwanted input, we read it so that it appears in the log of the
-error.
-
-Arguments: none
-Returns: TRUE if all is well; FALSE if there is input pending
-*/
-
-static BOOL
-check_sync(void)
-{
-int fd, rc;
-fd_set fds;
-struct timeval tzero;
-
-if (!smtp_enforce_sync || sender_host_address == NULL ||
- sender_host_notsocket || tls_in.active >= 0)
- return TRUE;
-
-fd = fileno(smtp_in);
-FD_ZERO(&fds);
-FD_SET(fd, &fds);
-tzero.tv_sec = 0;
-tzero.tv_usec = 0;
-rc = select(fd + 1, (SELECT_ARG2_TYPE *)&fds, NULL, NULL, &tzero);
-
-if (rc <= 0) return TRUE; /* Not ready to read */
-rc = smtp_getc();
-if (rc < 0) return TRUE; /* End of file or error */
-
-smtp_ungetc(rc);
-rc = smtp_inend - smtp_inptr;
-if (rc > 150) rc = 150;
-smtp_inptr[rc] = 0;
-return FALSE;
-}
-
-
-
/*************************************************
* Log incomplete transactions *
*************************************************/
static void
incomplete_transaction_log(uschar *what)
{
-if (sender_address == NULL || /* No transaction in progress */
- !LOGGING(smtp_incomplete_transaction))
+if (!sender_address /* No transaction in progress */
+ || !LOGGING(smtp_incomplete_transaction))
return;
/* Build list of recipients for logging */
if (recipients_count > 0)
{
- int i;
- raw_recipients = store_get(recipients_count * sizeof(uschar *));
- for (i = 0; i < recipients_count; i++)
+ raw_recipients = store_get(recipients_count * sizeof(uschar *), GET_UNTAINTED);
+ for (int i = 0; i < recipients_count; i++)
raw_recipients[i] = recipients_list[i].address;
raw_recipients_count = recipients_count;
}
-/*************************************************
-* SMTP version of getc() *
-*************************************************/
+void
+smtp_command_timeout_exit(void)
+{
+log_write(L_lost_incoming_connection,
+ LOG_MAIN, "SMTP command timeout on%s connection from %s",
+ tls_in.active.sock >= 0 ? " TLS" : "", host_and_ident(FALSE));
+if (smtp_batched_input)
+ moan_smtp_batch(NULL, "421 SMTP command timeout"); /* Does not return */
+smtp_notquit_exit(US"command-timeout", US"421",
+ US"%s: SMTP command timeout - closing connection",
+ smtp_active_hostname);
+exim_exit(EXIT_FAILURE);
+}
-/* This gets the next byte from the SMTP input buffer. If the buffer is empty,
-it flushes the output, and refills the buffer, with a timeout. The signal
-handler is set appropriately by the calling function. This function is not used
-after a connection has negotiated itself into an TLS/SSL state.
+void
+smtp_command_sigterm_exit(void)
+{
+log_write(0, LOG_MAIN, "%s closed after SIGTERM", smtp_get_connection_info());
+if (smtp_batched_input)
+ moan_smtp_batch(NULL, "421 SIGTERM received"); /* Does not return */
+smtp_notquit_exit(US"signal-exit", US"421",
+ US"%s: Service not available - closing connection", smtp_active_hostname);
+exim_exit(EXIT_FAILURE);
+}
-Arguments: none
-Returns: the next character or EOF
+void
+smtp_data_timeout_exit(void)
+{
+log_write(L_lost_incoming_connection,
+ LOG_MAIN, "SMTP data timeout (message abandoned) on connection from %s F=<%s>",
+ sender_fullhost ? sender_fullhost : US"local process", sender_address);
+receive_bomb_out(US"data-timeout", US"SMTP incoming data timeout");
+/* Does not return */
+}
+
+void
+smtp_data_sigint_exit(void)
+{
+log_write(0, LOG_MAIN, "%s closed after %s",
+ smtp_get_connection_info(), had_data_sigint == SIGTERM ? "SIGTERM":"SIGINT");
+receive_bomb_out(US"signal-exit",
+ US"Service not available - SIGTERM or SIGINT received");
+/* Does not return */
+}
+
+
+/******************************************************************************/
+/* SMTP input buffer handling. Most of these are similar to stdio routines. */
+
+static void
+smtp_buf_init(void)
+{
+/* Set up the buffer for inputting using direct read() calls, and arrange to
+call the local functions instead of the standard C ones. Place a NUL at the
+end of the buffer to safety-stop C-string reads from it. */
+
+if (!(smtp_inbuffer = US malloc(IN_BUFFER_SIZE)))
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "malloc() failed for SMTP input buffer");
+smtp_inbuffer[IN_BUFFER_SIZE-1] = '\0';
+
+smtp_inptr = smtp_inend = smtp_inbuffer;
+smtp_had_eof = smtp_had_error = 0;
+}
+
+
+
+/* Refill the buffer, and notify DKIM verification code.
+Return false for error or EOF.
*/
-int
-smtp_getc(void)
+static BOOL
+smtp_refill(unsigned lim)
{
-if (smtp_inptr >= smtp_inend)
+int rc, save_errno;
+
+if (!smtp_out) return FALSE;
+fflush(smtp_out);
+if (smtp_receive_timeout > 0) ALARM(smtp_receive_timeout);
+
+/* Limit amount read, so non-message data is not fed to DKIM.
+Take care to not touch the safety NUL at the end of the buffer. */
+
+rc = read(fileno(smtp_in), smtp_inbuffer, MIN(IN_BUFFER_SIZE-1, lim));
+save_errno = errno;
+if (smtp_receive_timeout > 0) ALARM_CLR(0);
+if (rc <= 0)
{
- int rc, save_errno;
- if (!smtp_out) return EOF;
- fflush(smtp_out);
- if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout);
- rc = read(fileno(smtp_in), smtp_inbuffer, in_buffer_size);
- save_errno = errno;
- alarm(0);
- if (rc <= 0)
+ /* Must put the error text in fixed store, because this might be during
+ header reading, where it releases unused store above the header. */
+ if (rc < 0)
{
- /* Must put the error text in fixed store, because this might be during
- header reading, where it releases unused store above the header. */
- if (rc < 0)
- {
- smtp_had_error = save_errno;
- smtp_read_error = string_copy_malloc(
- string_sprintf(" (error: %s)", strerror(save_errno)));
- }
- else smtp_had_eof = 1;
- return EOF;
+ if (had_command_timeout) /* set by signal handler */
+ smtp_command_timeout_exit(); /* does not return */
+ if (had_command_sigterm)
+ smtp_command_sigterm_exit();
+ if (had_data_timeout)
+ smtp_data_timeout_exit();
+ if (had_data_sigint)
+ smtp_data_sigint_exit();
+
+ smtp_had_error = save_errno;
+ smtp_read_error = string_copy_perm(
+ string_sprintf(" (error: %s)", strerror(save_errno)), FALSE);
}
+ else
+ smtp_had_eof = 1;
+ return FALSE;
+ }
#ifndef DISABLE_DKIM
- dkim_exim_verify_feed(smtp_inbuffer, rc);
+dkim_exim_verify_feed(smtp_inbuffer, rc);
#endif
- smtp_inend = smtp_inbuffer + rc;
- smtp_inptr = smtp_inbuffer;
- }
+smtp_inend = smtp_inbuffer + rc;
+smtp_inptr = smtp_inbuffer;
+return TRUE;
+}
+
+
+/* Check if there is buffered data */
+
+BOOL
+smtp_hasc(void)
+{
+return smtp_inptr < smtp_inend;
+}
+
+/* SMTP version of getc()
+
+This gets the next byte from the SMTP input buffer. If the buffer is empty,
+it flushes the output, and refills the buffer, with a timeout. The signal
+handler is set appropriately by the calling function. This function is not used
+after a connection has negotiated itself into an TLS/SSL state.
+
+Arguments: lim Maximum amount to read/buffer
+Returns: the next character or EOF
+*/
+
+int
+smtp_getc(unsigned lim)
+{
+if (!smtp_hasc() && !smtp_refill(lim)) return EOF;
return *smtp_inptr++;
}
+/* Get many bytes, refilling buffer if needed */
+
+uschar *
+smtp_getbuf(unsigned * len)
+{
+unsigned size;
+uschar * buf;
+
+if (!smtp_hasc() && !smtp_refill(*len))
+ { *len = 0; return NULL; }
+
+if ((size = smtp_inend - smtp_inptr) > *len) size = *len;
+buf = smtp_inptr;
+smtp_inptr += size;
+*len = size;
+return buf;
+}
+
+/* Copy buffered data to the dkim feed.
+Called, unless TLS, just before starting to read message headers. */
+
void
-smtp_get_cache(void)
+smtp_get_cache(unsigned lim)
{
#ifndef DISABLE_DKIM
int n = smtp_inend - smtp_inptr;
+if (n > lim)
+ n = lim;
if (n > 0)
dkim_exim_verify_feed(smtp_inptr, n);
#endif
}
+/* SMTP version of ungetc()
+Puts a character back in the input buffer. Only ever called once.
+
+Arguments:
+ ch the character
+
+Returns: the character
+*/
+
+int
+smtp_ungetc(int ch)
+{
+if (smtp_inptr <= smtp_inbuffer) /* NB: NOT smtp_hasc() ! */
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "buffer underflow in smtp_ungetc");
+
+*--smtp_inptr = ch;
+return ch;
+}
+
+
+/* SMTP version of feof()
+Tests for a previous EOF
+
+Arguments: none
+Returns: non-zero if the eof flag is set
+*/
+
+int
+smtp_feof(void)
+{
+return smtp_had_eof;
+}
+
+
+/* SMTP version of ferror()
+Tests for a previous read error, and returns with errno
+restored to what it was when the error was detected.
+
+Arguments: none
+Returns: non-zero if the error flag is set
+*/
+
+int
+smtp_ferror(void)
+{
+errno = smtp_had_error;
+return smtp_had_error;
+}
+
+
+/* Check if a getc will block or not */
+
+static BOOL
+smtp_could_getc(void)
+{
+int fd, rc;
+fd_set fds;
+struct timeval tzero = {.tv_sec = 0, .tv_usec = 0};
+
+if (smtp_inptr < smtp_inend)
+ return TRUE;
+
+fd = fileno(smtp_in);
+FD_ZERO(&fds);
+FD_SET(fd, &fds);
+rc = select(fd + 1, (SELECT_ARG2_TYPE *)&fds, NULL, NULL, &tzero);
+
+if (rc <= 0) return FALSE; /* Not ready to read */
+rc = smtp_getc(GETC_BUFFER_UNLIMITED);
+if (rc < 0) return FALSE; /* End of file or error */
+
+smtp_ungetc(rc);
+return TRUE;
+}
+
+
+/******************************************************************************/
+/*************************************************
+* Recheck synchronization *
+*************************************************/
+
+/* Synchronization checks can never be perfect because a packet may be on its
+way but not arrived when the check is done. Normally, the checks happen when
+commands are read: Exim ensures that there is no more input in the input buffer.
+In normal cases, the response to the command will be fast, and there is no
+further check.
+
+However, for some commands an ACL is run, and that can include delays. In those
+cases, it is useful to do another check on the input just before sending the
+response. This also applies at the start of a connection. This function does
+that check by means of the select() function, as long as the facility is not
+disabled or inappropriate. A failure of select() is ignored.
+
+When there is unwanted input, we read it so that it appears in the log of the
+error.
+
+Arguments: none
+Returns: TRUE if all is well; FALSE if there is input pending
+*/
+
+static BOOL
+wouldblock_reading(void)
+{
+#ifndef DISABLE_TLS
+if (tls_in.active.sock >= 0)
+ return !tls_could_getc();
+#endif
+
+return !smtp_could_getc();
+}
+
+static BOOL
+check_sync(void)
+{
+if (!smtp_enforce_sync || !sender_host_address || f.sender_host_notsocket)
+ return TRUE;
+
+return wouldblock_reading();
+}
+
+
+/******************************************************************************/
+/* Variants of the smtp_* input handling functions for use in CHUNKING mode */
+
+/* Forward declarations */
+static inline void bdat_push_receive_functions(void);
+static inline void bdat_pop_receive_functions(void);
+
+
/* Get a byte from the smtp input, in CHUNKING mode. Handle ack of the
previous BDAT chunk and getting new ones when we run out. Uses the
underlying smtp_getc or tls_getc both for that and for getting the
Placed here due to the correlation with the above smtp_getc(), which it wraps,
and also by the need to do smtp command/response handling.
-Arguments: none
+Arguments: lim (ignored)
Returns: the next character or ERR, EOD or EOF
*/
int
-bdat_getc(void)
+bdat_getc(unsigned lim)
{
uschar * user_msg = NULL;
uschar * log_msg;
for(;;)
{
- if (chunking_data_left-- > 0)
- return lwr_receive_getc();
+#ifndef DISABLE_DKIM
+ unsigned dkim_save;
+#endif
+
+ if (chunking_data_left > 0)
+ return lwr_receive_getc(chunking_data_left--);
- receive_getc = lwr_receive_getc;
- receive_ungetc = lwr_receive_ungetc;
+ bdat_pop_receive_functions();
+#ifndef DISABLE_DKIM
+ dkim_save = dkim_collect_input;
+ dkim_collect_input = 0;
+#endif
/* Unless PIPELINING was offered, there should be no next command
until after we ack that chunk */
- if (!pipelining_advertised && !check_sync())
+ if (!f.smtp_in_pipelining_advertised && !check_sync())
{
+ unsigned n = smtp_inend - smtp_inptr;
+ if (n > 32) n = 32;
+
incomplete_transaction_log(US"sync failure");
log_write(0, LOG_MAIN|LOG_REJECT, "SMTP protocol synchronization error "
"(next input sent too soon: pipelining was not advertised): "
- "rejected \"%s\" %s next input=\"%s\"",
+ "rejected \"%s\" %s next input=\"%s\"%s",
smtp_cmd_buffer, host_and_ident(TRUE),
- string_printing(smtp_inptr));
- (void) synprot_error(L_smtp_protocol_error, 554, NULL,
- US"SMTP synchronization error");
+ string_printing(string_copyn(smtp_inptr, n)),
+ smtp_inend - smtp_inptr > n ? "..." : "");
+ (void) synprot_error(L_smtp_protocol_error, 554, NULL,
+ US"SMTP synchronization error");
goto repeat_until_rset;
}
if (chunking_state == CHUNKING_LAST)
{
#ifndef DISABLE_DKIM
+ dkim_collect_input = dkim_save;
dkim_exim_verify_feed(NULL, 0); /* notify EOD */
+ dkim_collect_input = 0;
#endif
return EOD;
}
+ smtp_printf("250 %u byte chunk received\r\n", FALSE, chunking_datasize);
chunking_state = CHUNKING_OFFERED;
- smtp_printf("250 %u byte chunk received\r\n", chunking_datasize);
+ DEBUG(D_receive) debug_printf("chunking state %d\n", (int)chunking_state);
/* Expect another BDAT cmd from input. RFC 3030 says nothing about
QUIT, RSET or NOOP but handling them seems obvious */
next_cmd:
- switch(smtp_read_command(TRUE))
+ switch(smtp_read_command(TRUE, 1))
{
default:
(void) synprot_error(L_smtp_protocol_error, 503, NULL,
US"only BDAT permissible after non-LAST BDAT");
repeat_until_rset:
- switch(smtp_read_command(TRUE))
+ switch(smtp_read_command(TRUE, 1))
{
case QUIT_CMD: smtp_quit_handler(&user_msg, &log_msg); /*FALLTHROUGH */
case EOF_CMD: return EOF;
case NOOP_CMD:
HAD(SCH_NOOP);
- smtp_printf("250 OK\r\n");
+ smtp_printf("250 OK\r\n", FALSE);
goto next_cmd;
case BDAT_CMD:
chunking_state = strcmpic(smtp_cmd_data+n, US"LAST") == 0
? CHUNKING_LAST : CHUNKING_ACTIVE;
chunking_data_left = chunking_datasize;
+ DEBUG(D_receive) debug_printf("chunking state %d, %d bytes\n",
+ (int)chunking_state, chunking_data_left);
if (chunking_datasize == 0)
if (chunking_state == CHUNKING_LAST)
goto repeat_until_rset;
}
- receive_getc = bdat_getc;
- receive_ungetc = bdat_ungetc;
+ bdat_push_receive_functions();
+#ifndef DISABLE_DKIM
+ dkim_collect_input = dkim_save;
+#endif
break; /* to top of main loop */
}
}
}
}
-static void
-bdat_flush_data(void)
+BOOL
+bdat_hasc(void)
{
-while (chunking_data_left-- > 0)
- if (lwr_receive_getc() < 0)
- break;
-
-receive_getc = lwr_receive_getc;
-receive_ungetc = lwr_receive_ungetc;
-
-if (chunking_state != CHUNKING_LAST)
- chunking_state = CHUNKING_OFFERED;
+if (chunking_data_left > 0)
+ return lwr_receive_hasc();
+return TRUE;
}
+uschar *
+bdat_getbuf(unsigned * len)
+{
+uschar * buf;
+if (chunking_data_left <= 0)
+ { *len = 0; return NULL; }
+if (*len > chunking_data_left) *len = chunking_data_left;
+buf = lwr_receive_getbuf(len); /* Either smtp_getbuf or tls_getbuf */
+chunking_data_left -= *len;
+return buf;
+}
-/*************************************************
-* SMTP version of ungetc() *
-*************************************************/
-
-/* Puts a character back in the input buffer. Only ever
-called once.
-
-Arguments:
- ch the character
-
-Returns: the character
-*/
-
-int
-smtp_ungetc(int ch)
+void
+bdat_flush_data(void)
{
-*--smtp_inptr = ch;
-return ch;
-}
-
+while (chunking_data_left)
+ {
+ unsigned n = chunking_data_left;
+ if (!bdat_getbuf(&n)) break;
+ }
-int
-bdat_ungetc(int ch)
-{
-chunking_data_left++;
-return lwr_receive_ungetc(ch);
+bdat_pop_receive_functions();
+chunking_state = CHUNKING_OFFERED;
+DEBUG(D_receive) debug_printf("chunking state %d\n", (int)chunking_state);
}
-
-/*************************************************
-* SMTP version of feof() *
-*************************************************/
-
-/* Tests for a previous EOF
-
-Arguments: none
-Returns: non-zero if the eof flag is set
-*/
-
-int
-smtp_feof(void)
+static inline void
+bdat_push_receive_functions(void)
{
-return smtp_had_eof;
-}
-
-
-
+/* push the current receive_* function on the "stack", and
+replace them by bdat_getc(), which in turn will use the lwr_receive_*
+functions to do the dirty work. */
+if (!lwr_receive_getc)
+ {
+ lwr_receive_getc = receive_getc;
+ lwr_receive_getbuf = receive_getbuf;
+ lwr_receive_hasc = receive_hasc;
+ lwr_receive_ungetc = receive_ungetc;
+ }
+else
+ {
+ DEBUG(D_receive) debug_printf("chunking double-push receive functions\n");
+ }
-/*************************************************
-* SMTP version of ferror() *
-*************************************************/
+receive_getc = bdat_getc;
+receive_getbuf = bdat_getbuf;
+receive_hasc = bdat_hasc;
+receive_ungetc = bdat_ungetc;
+}
-/* Tests for a previous read error, and returns with errno
-restored to what it was when the error was detected.
+static inline void
+bdat_pop_receive_functions(void)
+{
+if (!lwr_receive_getc)
+ {
+ DEBUG(D_receive) debug_printf("chunking double-pop receive functions\n");
+ return;
+ }
+receive_getc = lwr_receive_getc;
+receive_getbuf = lwr_receive_getbuf;
+receive_hasc = lwr_receive_hasc;
+receive_ungetc = lwr_receive_ungetc;
-Arguments: none
-Returns: non-zero if the error flag is set
-*/
+lwr_receive_getc = NULL;
+lwr_receive_getbuf = NULL;
+lwr_receive_hasc = NULL;
+lwr_receive_ungetc = NULL;
+}
int
-smtp_ferror(void)
+bdat_ungetc(int ch)
{
-errno = smtp_had_error;
-return smtp_had_error;
+chunking_data_left++;
+bdat_push_receive_functions(); /* we're not done yet, calling push is safe, because it checks the state before pushing anything */
+return lwr_receive_ungetc(ch);
}
-/*************************************************
-* Test for characters in the SMTP buffer *
-*************************************************/
-
-/* Used at the end of a message
-
-Arguments: none
-Returns: TRUE/FALSE
-*/
-
-BOOL
-smtp_buffered(void)
-{
-return smtp_inptr < smtp_inend;
-}
-
-
+/******************************************************************************/
/*************************************************
* Write formatted string to SMTP channel *
checking that: for convenience, TLS output errors are remembered here so that
they are also picked up later by smtp_fflush().
+This function is exposed to the local_scan API; do not change the signature.
+
Arguments:
format format string
+ more further data expected
... optional arguments
Returns: nothing
*/
void
-smtp_printf(const char *format, ...)
+smtp_printf(const char *format, BOOL more, ...)
{
va_list ap;
-va_start(ap, format);
-smtp_vprintf(format, ap);
+va_start(ap, more);
+smtp_vprintf(format, more, ap);
va_end(ap);
}
/* This is split off so that verify.c:respond_printf() can, in effect, call
smtp_printf(), bearing in mind that in C a vararg function can't directly
-call another vararg function, only a function which accepts a va_list. */
+call another vararg function, only a function which accepts a va_list.
+
+This function is exposed to the local_scan API; do not change the signature.
+*/
+/*XXX consider passing caller-info in, for string_vformat-onward */
void
-smtp_vprintf(const char *format, va_list ap)
+smtp_vprintf(const char *format, BOOL more, va_list ap)
{
+gstring gs = { .size = big_buffer_size, .ptr = 0, .s = big_buffer };
BOOL yield;
-yield = string_vformat(big_buffer, big_buffer_size, format, ap);
+/* Use taint-unchecked routines for writing into big_buffer, trusting
+that we'll never expand it. */
-DEBUG(D_receive)
- {
- void *reset_point = store_get(0);
- uschar *msg_copy, *cr, *end;
- msg_copy = string_copy(big_buffer);
- end = msg_copy + Ustrlen(msg_copy);
- while ((cr = Ustrchr(msg_copy, '\r')) != NULL) /* lose CRs */
- memmove(cr, cr + 1, (end--) - cr);
- debug_printf("SMTP>> %s", msg_copy);
- store_reset(reset_point);
- }
+yield = !! string_vformat(&gs, SVFMT_TAINT_NOCHK, format, ap);
+string_from_gstring(&gs);
+
+DEBUG(D_receive) for (const uschar * t, * s = gs.s;
+ s && (t = Ustrchr(s, '\r'));
+ s = t + 2) /* \r\n */
+ debug_printf("%s %.*s\n",
+ s == gs.s ? "SMTP>>" : " ",
+ (int)(t - s), s);
if (!yield)
{
do it that way, so as not to have to mess with the code for the RCPT command,
which sometimes uses smtp_printf() and sometimes smtp_respond(). */
-if (rcpt_in_progress)
+if (fl.rcpt_in_progress)
{
- if (rcpt_smtp_response == NULL)
+ if (!rcpt_smtp_response)
rcpt_smtp_response = string_copy(big_buffer);
- else if (rcpt_smtp_response_same &&
+ else if (fl.rcpt_smtp_response_same &&
Ustrcmp(rcpt_smtp_response, big_buffer) != 0)
- rcpt_smtp_response_same = FALSE;
- rcpt_in_progress = FALSE;
+ fl.rcpt_smtp_response_same = FALSE;
+ fl.rcpt_in_progress = FALSE;
}
/* Now write the string */
-#ifdef SUPPORT_TLS
-if (tls_in.active >= 0)
- {
- if (tls_write(TRUE, big_buffer, Ustrlen(big_buffer)) < 0)
- smtp_write_error = -1;
- }
-else
+if (
+#ifndef DISABLE_TLS
+ tls_in.active.sock >= 0 ? (tls_write(NULL, gs.s, gs.ptr, more) < 0) :
#endif
-
-if (fprintf(smtp_out, "%s", big_buffer) < 0) smtp_write_error = -1;
+ (fwrite(gs.s, gs.ptr, 1, smtp_out) == 0)
+ )
+ smtp_write_error = -1;
}
/* This function isn't currently used within Exim (it detects errors when it
tries to read the next SMTP input), but is available for use in local_scan().
-For non-TLS connections, it flushes the output and checks for errors. For
-TLS-connections, it checks for a previously-detected TLS write error.
+It flushes the output and checks for errors.
Arguments: none
Returns: 0 for no error; -1 after an error
int
smtp_fflush(void)
{
-if (tls_in.active < 0 && fflush(smtp_out) != 0) smtp_write_error = -1;
+if (tls_in.active.sock < 0 && fflush(smtp_out) != 0) smtp_write_error = -1;
+
+if (
+#ifndef DISABLE_TLS
+ tls_in.active.sock >= 0 ? (tls_write(NULL, NULL, 0, FALSE) < 0) :
+#endif
+ (fflush(smtp_out) != 0)
+ )
+ smtp_write_error = -1;
+
return smtp_write_error;
}
+/* If there's input waiting (and we're doing pipelineing) then we can pipeline
+a reponse with the one following. */
+
+static BOOL
+pipeline_response(void)
+{
+if ( !smtp_enforce_sync || !sender_host_address
+ || f.sender_host_notsocket || !f.smtp_in_pipelining_advertised)
+ return FALSE;
+
+if (wouldblock_reading()) return FALSE;
+f.smtp_in_pipelining_used = TRUE;
+return TRUE;
+}
+
+
+#ifndef DISABLE_PIPE_CONNECT
+static BOOL
+pipeline_connect_sends(void)
+{
+if (!sender_host_address || f.sender_host_notsocket || !fl.pipe_connect_acceptable)
+ return FALSE;
+
+if (wouldblock_reading()) return FALSE;
+f.smtp_in_early_pipe_used = TRUE;
+return TRUE;
+}
+#endif
+
/*************************************************
* SMTP command read timeout *
*************************************************/
static void
command_timeout_handler(int sig)
{
-sig = sig; /* Keep picky compilers happy */
-log_write(L_lost_incoming_connection,
- LOG_MAIN, "SMTP command timeout on%s connection from %s",
- (tls_in.active >= 0)? " TLS" : "",
- host_and_ident(FALSE));
-if (smtp_batched_input)
- moan_smtp_batch(NULL, "421 SMTP command timeout"); /* Does not return */
-smtp_notquit_exit(US"command-timeout", US"421",
- US"%s: SMTP command timeout - closing connection", smtp_active_hostname);
-exim_exit(EXIT_FAILURE);
+had_command_timeout = sig;
}
static void
command_sigterm_handler(int sig)
{
-sig = sig; /* Keep picky compilers happy */
-log_write(0, LOG_MAIN, "%s closed after SIGTERM", smtp_get_connection_info());
-if (smtp_batched_input)
- moan_smtp_batch(NULL, "421 SIGTERM received"); /* Does not return */
-smtp_notquit_exit(US"signal-exit", US"421",
- US"%s: Service not available - closing connection", smtp_active_hostname);
-exim_exit(EXIT_FAILURE);
+had_command_sigterm = sig;
}
#ifdef SUPPORT_PROXY
-/*************************************************
-* Restore socket timeout to previous value *
-*************************************************/
-/* If the previous value was successfully retrieved, restore
-it before returning control to the non-proxy routines
-
-Arguments: fd - File descriptor for input
- get_ok - Successfully retrieved previous values
- tvtmp - Time struct with previous values
- vslen - Length of time struct
-Returns: none
-*/
-static void
-restore_socket_timeout(int fd, int get_ok, struct timeval * tvtmp, socklen_t vslen)
-{
-if (get_ok == 0)
- (void) setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, CS tvtmp, vslen);
-}
-
/*************************************************
* Check if host is required proxy host *
*************************************************/
/* The function determines if inbound host will be a regular smtp host
-or if it is configured that it must use Proxy Protocol.
+or if it is configured that it must use Proxy Protocol. A local
+connection cannot.
Arguments: none
Returns: bool
check_proxy_protocol_host()
{
int rc;
-/* Cannot configure local connection as a proxy inbound */
-if (sender_host_address == NULL) return proxy_session;
-rc = verify_check_this_host(CUSS &hosts_proxy, NULL, NULL,
- sender_host_address, NULL);
-if (rc == OK)
+if ( sender_host_address
+ && (rc = verify_check_this_host(CUSS &hosts_proxy, NULL, NULL,
+ sender_host_address, NULL)) == OK)
{
DEBUG(D_receive)
debug_printf("Detected proxy protocol configured host\n");
}
+/*************************************************
+* Read data until newline or end of buffer *
+*************************************************/
+/* While SMTP is server-speaks-first, TLS is client-speaks-first, so we can't
+read an entire buffer and assume there will be nothing past a proxy protocol
+header. Our approach normally is to use stdio, but again that relies upon
+"STARTTLS\r\n" and a server response before the client starts TLS handshake, or
+reading _nothing_ before client TLS handshake. So we don't want to use the
+usual buffering reads which may read enough to block TLS starting.
+
+So unfortunately we're down to "read one byte at a time, with a syscall each,
+and expect a little overhead", for all proxy-opened connections which are v1,
+just to handle the TLS-on-connect case. Since SSL functions wrap the
+underlying fd, we can't assume that we can feed them any already-read content.
+
+We need to know where to read to, the max capacity, and we'll read until we
+get a CR and one more character. Let the caller scream if it's CR+!LF.
+
+Return the amount read.
+*/
+
+static int
+swallow_until_crlf(int fd, uschar *base, int already, int capacity)
+{
+uschar *to = base + already;
+uschar *cr;
+int have = 0;
+int ret;
+int last = 0;
+
+/* For "PROXY UNKNOWN\r\n" we, at time of writing, expect to have read
+up through the \r; for the _normal_ case, we haven't yet seen the \r. */
+
+cr = memchr(base, '\r', already);
+if (cr != NULL)
+ {
+ if ((cr - base) < already - 1)
+ {
+ /* \r and presumed \n already within what we have; probably not
+ actually proxy protocol, but abort cleanly. */
+ return 0;
+ }
+ /* \r is last character read, just need one more. */
+ last = 1;
+ }
+
+while (capacity > 0)
+ {
+ do { ret = read(fd, to, 1); } while (ret == -1 && errno == EINTR && !had_command_timeout);
+ if (ret == -1)
+ return -1;
+ have++;
+ if (last)
+ return have;
+ if (*to == '\r')
+ last = 1;
+ capacity--;
+ to++;
+ }
+
+/* reached end without having room for a final newline, abort */
+errno = EOVERFLOW;
+return -1;
+}
+
/*************************************************
* Setup host for proxy protocol *
*************************************************/
Returns: Boolean success
*/
-static BOOL
+static void
setup_proxy_protocol_host()
{
union {
char tmpip6[INET6_ADDRSTRLEN];
struct sockaddr_in6 tmpaddr6;
+/* We can't read "all data until end" because while SMTP is
+server-speaks-first, the TLS handshake is client-speaks-first, so for
+TLS-on-connect ports the proxy protocol header will usually be immediately
+followed by a TLS handshake, and with N TLS libraries, we can't reliably
+reinject data for reading by those. So instead we first read "enough to be
+safely read within the header, and figure out how much more to read".
+For v1 we will later read to the end-of-line, for v2 we will read based upon
+the stated length.
+
+The v2 sig is 12 octets, and another 4 gets us the length, so we know how much
+data is needed total. For v1, where the line looks like:
+PROXY TCPn L3src L3dest SrcPort DestPort \r\n
+
+However, for v1 there's also `PROXY UNKNOWN\r\n` which is only 15 octets.
+We seem to support that. So, if we read 14 octets then we can tell if we're
+v2 or v1. If we're v1, we can continue reading as normal.
+
+If we're v2, we can't slurp up the entire header. We need the length in the
+15th & 16th octets, then to read everything after that.
+
+So to safely handle v1 and v2, with client-sent-first supported correctly,
+we have to do a minimum of 3 read calls, not 1. Eww.
+*/
+
+#define PROXY_INITIAL_READ 14
+#define PROXY_V2_HEADER_SIZE 16
+#if PROXY_INITIAL_READ > PROXY_V2_HEADER_SIZE
+# error Code bug in sizes of data to read for proxy usage
+#endif
+
int get_ok = 0;
int size, ret;
int fd = fileno(smtp_in);
const char v2sig[12] = "\x0D\x0A\x0D\x0A\x00\x0D\x0A\x51\x55\x49\x54\x0A";
-uschar *iptype; /* To display debug info */
-struct timeval tv;
-struct timeval tvtmp;
+uschar * iptype; /* To display debug info */
socklen_t vslen = sizeof(struct timeval);
+BOOL yield = FALSE;
-/* Save current socket timeout values */
-get_ok = getsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, CS &tvtmp, &vslen);
-
-/* Proxy Protocol host must send header within a short time
-(default 3 seconds) or it's considered invalid */
-tv.tv_sec = PROXY_NEGOTIATION_TIMEOUT_SEC;
-tv.tv_usec = PROXY_NEGOTIATION_TIMEOUT_USEC;
-if (setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, CS &tv, sizeof(tv)) < 0)
- return FALSE;
+os_non_restarting_signal(SIGALRM, command_timeout_handler);
+ALARM(proxy_protocol_timeout);
do
{
/* The inbound host was declared to be a Proxy Protocol host, so
- don't do a PEEK into the data, actually slurp it up. */
- ret = recv(fd, &hdr, sizeof(hdr), 0);
+ don't do a PEEK into the data, actually slurp up enough to be
+ "safe". Can't take it all because TLS-on-connect clients follow
+ immediately with TLS handshake. */
+ ret = read(fd, &hdr, PROXY_INITIAL_READ);
}
- while (ret == -1 && errno == EINTR);
+ while (ret == -1 && errno == EINTR && !had_command_timeout);
if (ret == -1)
goto proxyfail;
-if (ret >= 16 && memcmp(&hdr.v2, v2sig, 12) == 0)
+/* For v2, handle reading the length, and then the rest. */
+if ((ret == PROXY_INITIAL_READ) && (memcmp(&hdr.v2, v2sig, sizeof(v2sig)) == 0))
{
- uint8_t ver = (hdr.v2.ver_cmd & 0xf0) >> 4;
- uint8_t cmd = (hdr.v2.ver_cmd & 0x0f);
+ int retmore;
+ uint8_t ver;
+
+ /* First get the length fields. */
+ do
+ {
+ retmore = read(fd, (uschar*)&hdr + ret, PROXY_V2_HEADER_SIZE - PROXY_INITIAL_READ);
+ } while (retmore == -1 && errno == EINTR && !had_command_timeout);
+ if (retmore == -1)
+ goto proxyfail;
+ ret += retmore;
+
+ ver = (hdr.v2.ver_cmd & 0xf0) >> 4;
/* May 2014: haproxy combined the version and command into one byte to
- allow two full bytes for the length field in order to proxy SSL
- connections. SSL Proxy is not supported in this version of Exim, but
- must still separate values here. */
+ allow two full bytes for the length field in order to proxy SSL
+ connections. SSL Proxy is not supported in this version of Exim, but
+ must still separate values here. */
if (ver != 0x02)
{
DEBUG(D_receive) debug_printf("Invalid Proxy Protocol version: %d\n", ver);
goto proxyfail;
}
- DEBUG(D_receive) debug_printf("Detected PROXYv2 header\n");
+
/* The v2 header will always be 16 bytes per the spec. */
size = 16 + ntohs(hdr.v2.len);
- if (ret < size)
+ DEBUG(D_receive) debug_printf("Detected PROXYv2 header, size %d (limit %d)\n",
+ size, (int)sizeof(hdr));
+
+ /* We should now have 16 octets (PROXY_V2_HEADER_SIZE), and we know the total
+ amount that we need. Double-check that the size is not unreasonable, then
+ get the rest. */
+ if (size > sizeof(hdr))
{
- DEBUG(D_receive) debug_printf("Truncated or too large PROXYv2 header (%d/%d)\n",
- ret, size);
+ DEBUG(D_receive) debug_printf("PROXYv2 header size unreasonably large; security attack?\n");
goto proxyfail;
}
+
+ do
+ {
+ do
+ {
+ retmore = read(fd, (uschar*)&hdr + ret, size-ret);
+ } while (retmore == -1 && errno == EINTR && !had_command_timeout);
+ if (retmore == -1)
+ goto proxyfail;
+ ret += retmore;
+ DEBUG(D_receive) debug_printf("PROXYv2: have %d/%d required octets\n", ret, size);
+ } while (ret < size);
+
+ } /* end scope for getting rest of data for v2 */
+
+/* At this point: if PROXYv2, we've read the exact size required for all data;
+if PROXYv1 then we've read "less than required for any valid line" and should
+read the rest". */
+
+if (ret >= 16 && memcmp(&hdr.v2, v2sig, 12) == 0)
+ {
+ uint8_t cmd = (hdr.v2.ver_cmd & 0x0f);
+
switch (cmd)
{
case 0x01: /* PROXY command */
break;
case 0x00: /* LOCAL command */
/* Keep local connection address for LOCAL */
+ iptype = US"local";
break;
default:
DEBUG(D_receive)
}
else if (ret >= 8 && memcmp(hdr.v1.line, "PROXY", 5) == 0)
{
- uschar *p = string_copy(hdr.v1.line);
- uschar *end = memchr(p, '\r', ret - 1);
+ uschar *p;
+ uschar *end;
uschar *sp; /* Utility variables follow */
int tmp_port;
+ int r2;
char *endc;
- if (!end || end[1] != '\n')
+ /* get the rest of the line */
+ r2 = swallow_until_crlf(fd, (uschar*)&hdr, ret, sizeof(hdr)-ret);
+ if (r2 == -1)
+ goto proxyfail;
+ ret += r2;
+
+ p = string_copy(hdr.v1.line);
+ end = memchr(p, '\r', ret - 1);
+
+ if (!end || (end == (uschar*)&hdr + ret) || end[1] != '\n')
{
DEBUG(D_receive) debug_printf("Partial or invalid PROXY header\n");
goto proxyfail;
}
*end = '\0'; /* Terminate the string */
- size = end + 2 - hdr.v1.line; /* Skip header + CRLF */
+ size = end + 2 - p; /* Skip header + CRLF */
DEBUG(D_receive) debug_printf("Detected PROXYv1 header\n");
+ DEBUG(D_receive) debug_printf("Bytes read not within PROXY header: %d\n", ret - size);
/* Step through the string looking for the required fields. Ensure
- strict adherence to required formatting, exit for any error. */
+ strict adherence to required formatting, exit for any error. */
p += 5;
if (!isspace(*(p++)))
{
}
proxy_external_port = tmp_port;
/* Already checked for /r /n above. Good V1 header received. */
- goto done;
}
else
{
/* Wrong protocol */
DEBUG(D_receive) debug_printf("Invalid proxy protocol version negotiation\n");
+ (void) swallow_until_crlf(fd, (uschar*)&hdr, ret, sizeof(hdr)-ret);
goto proxyfail;
}
+done:
+ DEBUG(D_receive)
+ debug_printf("Valid %s sender from Proxy Protocol header\n", iptype);
+ yield = proxy_session;
+
+/* Don't flush any potential buffer contents. Any input on proxyfail
+should cause a synchronization failure */
+
proxyfail:
-restore_socket_timeout(fd, get_ok, &tvtmp, vslen);
-/* Don't flush any potential buffer contents. Any input should cause a
- synchronization failure */
-return FALSE;
+ DEBUG(D_receive) if (had_command_timeout)
+ debug_printf("Timeout while reading proxy header\n");
-done:
-restore_socket_timeout(fd, get_ok, &tvtmp, vslen);
-DEBUG(D_receive)
- debug_printf("Valid %s sender from Proxy Protocol header\n", iptype);
-return proxy_session;
+bad:
+ if (yield)
+ {
+ sender_host_name = NULL;
+ (void) host_name_lookup();
+ host_build_sender_fullhost();
+ }
+ else
+ {
+ f.proxy_session_failed = TRUE;
+ DEBUG(D_receive)
+ debug_printf("Failure to extract proxied host, only QUIT allowed\n");
+ }
+
+ALARM(0);
+return;
}
#endif
return when it runs.
Arguments:
- check_sync if TRUE, check synchronization rules if global option is TRUE
+ check_sync if TRUE, check synchronization rules if global option is TRUE
+ buffer_lim maximum to buffer in lower layer
Returns: a code identifying the command (enumerated above)
*/
static int
-smtp_read_command(BOOL check_sync)
+smtp_read_command(BOOL check_sync, unsigned buffer_lim)
{
int c;
int ptr = 0;
-smtp_cmd_list *p;
BOOL hadnull = FALSE;
+had_command_timeout = 0;
os_non_restarting_signal(SIGALRM, command_timeout_handler);
-while ((c = (receive_getc)()) != '\n' && c != EOF)
+while ((c = (receive_getc)(buffer_lim)) != '\n' && c != EOF)
{
- if (ptr >= smtp_cmd_buffer_size)
+ if (ptr >= SMTP_CMD_BUFFER_SIZE)
{
os_non_restarting_signal(SIGALRM, sigalrm_handler);
return OTHER_CMD;
to the start of the actual data characters. Check for SMTP synchronization
if required. */
-for (p = cmd_list; p < cmd_list_end; p++)
+for (smtp_cmd_list * p = cmd_list; p < cmd_list_end; p++)
{
- #ifdef SUPPORT_PROXY
+#ifdef SUPPORT_PROXY
/* Only allow QUIT command if Proxy Protocol parsing failed */
- if (proxy_session && proxy_session_failed)
- {
- if (p->cmd != QUIT_CMD)
- continue;
- }
- #endif
+ if (proxy_session && f.proxy_session_failed && p->cmd != QUIT_CMD)
+ continue;
+#endif
if ( p->len
&& strncmpic(smtp_cmd_buffer, US p->name, p->len) == 0
&& ( smtp_cmd_buffer[p->len-1] == ':' /* "mail from:" or "rcpt to:" */
|| smtp_cmd_buffer[p->len] == ' '
) )
{
- if (smtp_inptr < smtp_inend && /* Outstanding input */
- p->cmd < sync_cmd_limit && /* Command should sync */
- check_sync && /* Local flag set */
- smtp_enforce_sync && /* Global flag set */
- sender_host_address != NULL && /* Not local input */
- !sender_host_notsocket) /* Really is a socket */
+ if ( smtp_inptr < smtp_inend /* Outstanding input */
+ && p->cmd < sync_cmd_limit /* Command should sync */
+ && check_sync /* Local flag set */
+ && smtp_enforce_sync /* Global flag set */
+ && sender_host_address != NULL /* Not local input */
+ && !f.sender_host_notsocket /* Really is a socket */
+ )
return BADSYN_CMD;
/* The variables $smtp_command and $smtp_command_argument point into the
#ifdef SUPPORT_PROXY
/* Only allow QUIT command if Proxy Protocol parsing failed */
-if (proxy_session && proxy_session_failed)
+if (proxy_session && f.proxy_session_failed)
return PROXY_FAIL_IGNORE_CMD;
#endif
/* Enforce synchronization for unknown commands */
-if (smtp_inptr < smtp_inend && /* Outstanding input */
- check_sync && /* Local flag set */
- smtp_enforce_sync && /* Global flag set */
- sender_host_address != NULL && /* Not local input */
- !sender_host_notsocket) /* Really is a socket */
+if ( smtp_inptr < smtp_inend /* Outstanding input */
+ && check_sync /* Local flag set */
+ && smtp_enforce_sync /* Global flag set */
+ && sender_host_address /* Not local input */
+ && !f.sender_host_notsocket /* Really is a socket */
+ )
return BADSYN_CMD;
return OTHER_CMD;
*/
void
-smtp_closedown(uschar *message)
+smtp_closedown(uschar * message)
{
-if (smtp_in == NULL || smtp_batched_input) return;
+if (!smtp_in || smtp_batched_input) return;
receive_swallow_smtp();
-smtp_printf("421 %s\r\n", message);
+smtp_printf("421 %s\r\n", FALSE, message);
-for (;;) switch(smtp_read_command(FALSE))
+for (;;) switch(smtp_read_command(FALSE, GETC_BUFFER_UNLIMITED))
{
case EOF_CMD:
- return;
+ return;
case QUIT_CMD:
- smtp_printf("221 %s closing connection\r\n", smtp_active_hostname);
- mac_smtp_fflush();
- return;
+ f.smtp_in_quit = TRUE;
+ smtp_printf("221 %s closing connection\r\n", FALSE, smtp_active_hostname);
+ mac_smtp_fflush();
+ return;
case RSET_CMD:
- smtp_printf("250 Reset OK\r\n");
- break;
+ smtp_printf("250 Reset OK\r\n", FALSE);
+ break;
default:
- smtp_printf("421 %s\r\n", message);
- break;
+ smtp_printf("421 %s\r\n", FALSE, message);
+ break;
}
}
if (host_checking)
return string_sprintf("SMTP connection from %s", hostname);
-if (sender_host_unknown || sender_host_notsocket)
+if (f.sender_host_unknown || f.sender_host_notsocket)
return string_sprintf("SMTP connection from %s", sender_ident);
-if (is_inetd)
+if (f.is_inetd)
return string_sprintf("SMTP connection from %s (via inetd)", hostname);
-if (LOGGING(incoming_interface) && interface_address != NULL)
+if (LOGGING(incoming_interface) && interface_address)
return string_sprintf("SMTP connection from %s I=[%s]:%d", hostname,
interface_address, interface_port);
-#ifdef SUPPORT_TLS
+#ifndef DISABLE_TLS
/* Append TLS-related information to a log line
Arguments:
- s String under construction: allocated string to extend, or NULL
- sizep Pointer to current allocation size (update on return), or NULL
- ptrp Pointer to index for new entries in string (update on return), or NULL
+ g String under construction: allocated string to extend, or NULL
Returns: Allocated string or NULL
*/
-static uschar *
-s_tlslog(uschar * s, int * sizep, int * ptrp)
+static gstring *
+s_tlslog(gstring * g)
+{
+if (LOGGING(tls_cipher) && tls_in.cipher)
+ {
+ g = string_append(g, 2, US" X=", tls_in.cipher);
+#ifndef DISABLE_TLS_RESUME
+ if (LOGGING(tls_resumption) && tls_in.resumption & RESUME_USED)
+ g = string_catn(g, US"*", 1);
+#endif
+ }
+if (LOGGING(tls_certificate_verified) && tls_in.cipher)
+ g = string_append(g, 2, US" CV=", tls_in.certificate_verified? "yes":"no");
+if (LOGGING(tls_peerdn) && tls_in.peerdn)
+ g = string_append(g, 3, US" DN=\"", string_printing(tls_in.peerdn), US"\"");
+if (LOGGING(tls_sni) && tls_in.sni)
+ g = string_append(g, 2, US" SNI=", string_printing2(tls_in.sni, SP_TAB|SP_SPACE));
+return g;
+}
+#endif
+
+
+
+static gstring *
+s_connhad_log(gstring * g)
{
- int size = sizep ? *sizep : 0;
- int ptr = ptrp ? *ptrp : 0;
-
- if (LOGGING(tls_cipher) && tls_in.cipher != NULL)
- s = string_append(s, &size, &ptr, 2, US" X=", tls_in.cipher);
- if (LOGGING(tls_certificate_verified) && tls_in.cipher != NULL)
- s = string_append(s, &size, &ptr, 2, US" CV=",
- tls_in.certificate_verified? "yes":"no");
- if (LOGGING(tls_peerdn) && tls_in.peerdn != NULL)
- s = string_append(s, &size, &ptr, 3, US" DN=\"",
- string_printing(tls_in.peerdn), US"\"");
- if (LOGGING(tls_sni) && tls_in.sni != NULL)
- s = string_append(s, &size, &ptr, 3, US" SNI=\"",
- string_printing(tls_in.sni), US"\"");
-
- if (s)
+const uschar * sep = smtp_connection_had[SMTP_HBUFF_SIZE-1] != SCH_NONE
+ ? US" C=..." : US" C=";
+
+for (int i = smtp_ch_index; i < SMTP_HBUFF_SIZE; i++)
+ if (smtp_connection_had[i] != SCH_NONE)
{
- s[ptr] = '\0';
- if (sizep) *sizep = size;
- if (ptrp) *ptrp = ptr;
+ g = string_append(g, 2, sep, smtp_names[smtp_connection_had[i]]);
+ sep = US",";
}
- return s;
+for (int i = 0; i < smtp_ch_index; i++, sep = US",")
+ g = string_append(g, 2, sep, smtp_names[smtp_connection_had[i]]);
+return g;
}
-#endif
+
/*************************************************
* Log lack of MAIL if so configured *
void
smtp_log_no_mail(void)
{
-int size, ptr, i;
-uschar *s, *sep;
+uschar * s;
+gstring * g = NULL;
if (smtp_mailcmd_count > 0 || !LOGGING(smtp_no_mail))
return;
-s = NULL;
-size = ptr = 0;
-
-if (sender_host_authenticated != NULL)
+if (sender_host_authenticated)
{
- s = string_append(s, &size, &ptr, 2, US" A=", sender_host_authenticated);
- if (authenticated_id != NULL)
- s = string_append(s, &size, &ptr, 2, US":", authenticated_id);
+ g = string_append(g, 2, US" A=", sender_host_authenticated);
+ if (authenticated_id) g = string_append(g, 2, US":", authenticated_id);
}
-#ifdef SUPPORT_TLS
-s = s_tlslog(s, &size, &ptr);
+#ifndef DISABLE_TLS
+g = s_tlslog(g);
#endif
-sep = (smtp_connection_had[SMTP_HBUFF_SIZE-1] != SCH_NONE)?
- US" C=..." : US" C=";
-for (i = smtp_ch_index; i < SMTP_HBUFF_SIZE; i++)
- {
+g = s_connhad_log(g);
+
+if (!(s = string_from_gstring(g))) s = US"";
+
+log_write(0, LOG_MAIN, "no MAIL in %sSMTP connection from %s D=%s%s",
+ f.tcp_in_fastopen ? f.tcp_in_fastopen_data ? US"TFO* " : US"TFO " : US"",
+ host_and_ident(FALSE), string_timesince(&smtp_connection_start), s);
+}
+
+
+/* Return list of recent smtp commands */
+
+uschar *
+smtp_cmd_hist(void)
+{
+gstring * list = NULL;
+uschar * s;
+
+for (int i = smtp_ch_index; i < SMTP_HBUFF_SIZE; i++)
if (smtp_connection_had[i] != SCH_NONE)
- {
- s = string_append(s, &size, &ptr, 2, sep,
- smtp_names[smtp_connection_had[i]]);
- sep = US",";
- }
- }
+ list = string_append_listele(list, ',', smtp_names[smtp_connection_had[i]]);
-for (i = 0; i < smtp_ch_index; i++)
- {
- s = string_append(s, &size, &ptr, 2, sep, smtp_names[smtp_connection_had[i]]);
- sep = US",";
- }
+for (int i = 0; i < smtp_ch_index; i++)
+ list = string_append_listele(list, ',', smtp_names[smtp_connection_had[i]]);
-if (s != NULL) s[ptr] = 0; else s = US"";
-log_write(0, LOG_MAIN, "no MAIL in SMTP connection from %s D=%s%s",
- host_and_ident(FALSE),
- readconf_printtime( (int) ((long)time(NULL) - (long)smtp_connection_start)),
- s);
+s = string_from_gstring(list);
+return s ? s : US"";
}
+
/*************************************************
* Check HELO line and set sender_helo_name *
*************************************************/
{
uschar *start = s;
uschar *end = s + Ustrlen(s);
-BOOL yield = helo_accept_junk;
+BOOL yield = fl.helo_accept_junk;
/* Discard any previous helo name */
-if (sender_helo_name != NULL)
- {
- store_free(sender_helo_name);
- sender_helo_name = NULL;
- }
+sender_helo_name = NULL;
/* Skip tests if junk is permitted. */
if (!yield)
- {
+
/* Allow the new standard form for IPv6 address literals, namely,
[IPv6:....], and because someone is bound to use it, allow an equivalent
IPv4 form. Allow plain addresses as well. */
/* Non-literals must be alpha, dot, hyphen, plus any non-valid chars
that have been configured (usually underscore - sigh). */
- else if (*s != 0)
- {
- yield = TRUE;
- while (*s != 0)
- {
+ else if (*s)
+ for (yield = TRUE; *s; s++)
if (!isalnum(*s) && *s != '.' && *s != '-' &&
Ustrchr(helo_allow_chars, *s) == NULL)
{
yield = FALSE;
break;
}
- s++;
- }
- }
- }
/* Save argument if OK */
-if (yield) sender_helo_name = string_copy_malloc(start);
+if (yield) sender_helo_name = string_copy_perm(start, TRUE);
return yield;
}
extract_option(uschar **name, uschar **value)
{
uschar *n;
-uschar *v = smtp_cmd_data + Ustrlen(smtp_cmd_data) - 1;
-while (isspace(*v)) v--;
+uschar *v;
+if (Ustrlen(smtp_cmd_data) <= 0) return FALSE;
+v = smtp_cmd_data + Ustrlen(smtp_cmd_data) - 1;
+while (v > smtp_cmd_data && isspace(*v)) v--;
v[1] = 0;
-while (v > smtp_cmd_data && *v != '=' && !isspace(*v)) v--;
-n = v;
-if (*v == '=')
-{
- while(isalpha(n[-1])) n--;
+while (v > smtp_cmd_data && *v != '=' && !isspace(*v))
+ {
+ /* Take care to not stop at a space embedded in a quoted local-part */
+ if (*v == '"')
+ {
+ do v--; while (v > smtp_cmd_data && *v != '"');
+ if (v <= smtp_cmd_data) return FALSE;
+ }
+ v--;
+ }
+if (v <= smtp_cmd_data) return FALSE;
+
+n = v;
+if (*v == '=')
+ {
+ while (n > smtp_cmd_data && isalpha(n[-1])) n--;
/* RFC says SP, but TAB seen in wild and other major MTAs accept it */
- if (!isspace(n[-1])) return FALSE;
+ if (n <= smtp_cmd_data || !isspace(n[-1])) return FALSE;
n[-1] = 0;
-}
+ }
else
-{
+ {
n++;
- if (v == smtp_cmd_data) return FALSE;
-}
+ }
*v++ = 0;
*name = n;
*value = v;
*************************************************/
/* This function is called whenever the SMTP session is reset from
-within either of the setup functions.
+within either of the setup functions; also from the daemon loop.
Argument: the stacking pool storage reset point
Returns: nothing
*/
-static void
+void *
smtp_reset(void *reset_point)
{
-store_reset(reset_point);
recipients_list = NULL;
rcpt_count = rcpt_defer_count = rcpt_fail_count =
raw_recipients_count = recipients_count = recipients_list_max = 0;
-cancel_cutthrough_connection("smtp reset");
message_linecount = 0;
message_size = -1;
+message_body = message_body_end = NULL;
acl_added_headers = NULL;
acl_removed_headers = NULL;
-queue_only_policy = FALSE;
+f.queue_only_policy = FALSE;
rcpt_smtp_response = NULL;
-rcpt_smtp_response_same = TRUE;
-rcpt_in_progress = FALSE;
-deliver_freeze = FALSE; /* Can be set by ACL */
-freeze_tell = freeze_tell_config; /* Can be set by ACL */
-fake_response = OK; /* Can be set by ACL */
+fl.rcpt_smtp_response_same = TRUE;
+fl.rcpt_in_progress = FALSE;
+f.deliver_freeze = FALSE; /* Can be set by ACL */
+freeze_tell = freeze_tell_config; /* Can be set by ACL */
+fake_response = OK; /* Can be set by ACL */
#ifdef WITH_CONTENT_SCAN
-no_mbox_unspool = FALSE; /* Can be set by ACL */
+f.no_mbox_unspool = FALSE; /* Can be set by ACL */
#endif
-submission_mode = FALSE; /* Can be set by ACL */
-suppress_local_fixups = suppress_local_fixups_default; /* Can be set by ACL */
-active_local_from_check = local_from_check; /* Can be set by ACL */
-active_local_sender_retain = local_sender_retain; /* Can be set by ACL */
-sender_address = NULL;
-submission_name = NULL; /* Can be set by ACL */
+f.submission_mode = FALSE; /* Can be set by ACL */
+f.suppress_local_fixups = f.suppress_local_fixups_default; /* Can be set by ACL */
+f.active_local_from_check = local_from_check; /* Can be set by ACL */
+f.active_local_sender_retain = local_sender_retain; /* Can be set by ACL */
+sending_ip_address = NULL;
+return_path = sender_address = NULL;
+deliver_localpart_data = deliver_domain_data =
+recipient_data = sender_data = NULL; /* Can be set by ACL */
+recipient_verify_failure = NULL;
+deliver_localpart_parent = deliver_localpart_orig = NULL;
+deliver_domain_parent = deliver_domain_orig = NULL;
+callout_address = NULL;
+submission_name = NULL; /* Can be set by ACL */
raw_sender = NULL; /* After SMTP rewrite, before qualifying */
sender_address_unrewritten = NULL; /* Set only after verify rewrite */
sender_verified_list = NULL; /* No senders verified */
bmi_run = 0;
bmi_verdicts = NULL;
#endif
+dnslist_domain = dnslist_matched = NULL;
+#ifdef SUPPORT_SPF
+spf_header_comment = spf_received = spf_result = spf_smtp_comment = NULL;
+spf_result_guessed = FALSE;
+#endif
#ifndef DISABLE_DKIM
-dkim_signers = NULL;
-dkim_disable_verify = FALSE;
-dkim_collect_input = FALSE;
+dkim_cur_signer = dkim_signers =
+dkim_signing_domain = dkim_signing_selector = dkim_signatures = NULL;
+dkim_cur_signer = dkim_signers = dkim_signing_domain = dkim_signing_selector = NULL;
+f.dkim_disable_verify = FALSE;
+dkim_collect_input = 0;
+dkim_verify_overall = dkim_verify_status = dkim_verify_reason = NULL;
+dkim_key_length = 0;
+#endif
+#ifdef SUPPORT_DMARC
+f.dmarc_has_been_checked = f.dmarc_disable_verify = f.dmarc_enable_forensic = FALSE;
+dmarc_domain_policy = dmarc_status = dmarc_status_text =
+dmarc_used_domain = NULL;
+#endif
+#ifdef EXPERIMENTAL_ARC
+arc_state = arc_state_reason = NULL;
+arc_received_instance = 0;
#endif
dsn_ret = 0;
dsn_envid = NULL;
+deliver_host = deliver_host_address = NULL; /* Can be set by ACL */
#ifndef DISABLE_PRDR
prdr_requested = FALSE;
#endif
-#ifdef EXPERIMENTAL_SPF
-spf_header_comment = NULL;
-spf_received = NULL;
-spf_result = NULL;
-spf_smtp_comment = NULL;
-#endif
#ifdef SUPPORT_I18N
message_smtputf8 = FALSE;
#endif
+#ifdef WITH_CONTENT_SCAN
+regex_vars_clear();
+#endif
body_linecount = body_zerocount = 0;
+lookup_value = NULL; /* Can be set by ACL */
sender_rate = sender_rate_limit = sender_rate_period = NULL;
ratelimiters_mail = NULL; /* Updated by ratelimit ACL condition */
/* Note that ratelimiters_conn persists across resets. */
acl_var_m = NULL;
-/* The message body variables use malloc store. They may be set if this is
-not the first message in an SMTP session and the previous message caused them
-to be referenced in an ACL. */
-
-if (message_body != NULL)
- {
- store_free(message_body);
- message_body = NULL;
- }
-
-if (message_body_end != NULL)
- {
- store_free(message_body_end);
- message_body_end = NULL;
- }
-
-/* Warning log messages are also saved in malloc store. They are saved to avoid
+/* Warning log messages are saved in malloc store. They are saved to avoid
repetition in the same message, but it seems right to repeat them for different
messages. */
-while (acl_warn_logged != NULL)
+while (acl_warn_logged)
{
string_item *this = acl_warn_logged;
acl_warn_logged = acl_warn_logged->next;
store_free(this);
}
+
+message_tidyup();
+store_reset(reset_point);
+
+message_start();
+return store_mark();
}
smtp_setup_batch_msg(void)
{
int done = 0;
-void *reset_point = store_get(0);
+rmark reset_point = store_mark();
/* Save the line count at the start of each transaction - single commands
like HELO and RSET count as whole transactions. */
if ((receive_feof)()) return 0; /* Treat EOF as QUIT */
-smtp_reset(reset_point); /* Reset for start of message */
+cancel_cutthrough_connection(TRUE, US"smtp_setup_batch_msg");
+reset_point = smtp_reset(reset_point); /* Reset for start of message */
/* Deal with SMTP commands. This loop is exited by setting done to a POSITIVE
value. The values are 2 larger than the required yield of the function. */
uschar *recipient = NULL;
int start, end, sender_domain, recipient_domain;
- switch(smtp_read_command(FALSE))
+ switch(smtp_read_command(FALSE, GETC_BUFFER_UNLIMITED))
{
/* The HELO/EHLO commands set sender_address_helo if they have
valid data; otherwise they are ignored, except that they do
case HELO_CMD:
case EHLO_CMD:
- check_helo(smtp_cmd_data);
- /* Fall through */
+ check_helo(smtp_cmd_data);
+ /* Fall through */
case RSET_CMD:
- smtp_reset(reset_point);
- bsmtp_transaction_linecount = receive_linecount;
- break;
+ cancel_cutthrough_connection(TRUE, US"RSET received");
+ reset_point = smtp_reset(reset_point);
+ bsmtp_transaction_linecount = receive_linecount;
+ break;
/* The MAIL FROM command requires an address as an operand. All we
it is the canonical extracted address which is all that is kept. */
case MAIL_CMD:
- smtp_mailcmd_count++; /* Count for no-mail log */
- if (sender_address != NULL)
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "503 Sender already given");
+ smtp_mailcmd_count++; /* Count for no-mail log */
+ if (sender_address)
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "503 Sender already given");
- if (smtp_cmd_data[0] == 0)
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "501 MAIL FROM must have an address operand");
+ if (smtp_cmd_data[0] == 0)
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "501 MAIL FROM must have an address operand");
- /* Reset to start of message */
+ /* Reset to start of message */
- smtp_reset(reset_point);
+ cancel_cutthrough_connection(TRUE, US"MAIL received");
+ reset_point = smtp_reset(reset_point);
- /* Apply SMTP rewrite */
+ /* Apply SMTP rewrite */
- raw_sender = ((rewrite_existflags & rewrite_smtp) != 0)?
- rewrite_one(smtp_cmd_data, rewrite_smtp|rewrite_smtp_sender, NULL, FALSE,
- US"", global_rewrite_rules) : smtp_cmd_data;
+ raw_sender = rewrite_existflags & rewrite_smtp
+ /* deconst ok as smtp_cmd_data was not const */
+ ? US rewrite_one(smtp_cmd_data, rewrite_smtp|rewrite_smtp_sender, NULL,
+ FALSE, US"", global_rewrite_rules)
+ : smtp_cmd_data;
- /* Extract the address; the TRUE flag allows <> as valid */
+ /* Extract the address; the TRUE flag allows <> as valid */
- raw_sender =
- parse_extract_address(raw_sender, &errmess, &start, &end, &sender_domain,
- TRUE);
+ raw_sender =
+ parse_extract_address(raw_sender, &errmess, &start, &end, &sender_domain,
+ TRUE);
- if (raw_sender == NULL)
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "501 %s", errmess);
+ if (!raw_sender)
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "501 %s", errmess);
- sender_address = string_copy(raw_sender);
+ sender_address = string_copy(raw_sender);
- /* Qualify unqualified sender addresses if permitted to do so. */
+ /* Qualify unqualified sender addresses if permitted to do so. */
- if (sender_domain == 0 && sender_address[0] != 0 && sender_address[0] != '@')
- {
- if (allow_unqualified_sender)
- {
- sender_address = rewrite_address_qualify(sender_address, FALSE);
- DEBUG(D_receive) debug_printf("unqualified address %s accepted "
- "and rewritten\n", raw_sender);
- }
- /* The function moan_smtp_batch() does not return. */
- else moan_smtp_batch(smtp_cmd_buffer, "501 sender address must contain "
- "a domain");
- }
- break;
+ if ( !sender_domain
+ && sender_address[0] != 0 && sender_address[0] != '@')
+ if (f.allow_unqualified_sender)
+ {
+ /* deconst ok as sender_address was not const */
+ sender_address = US rewrite_address_qualify(sender_address, FALSE);
+ DEBUG(D_receive) debug_printf("unqualified address %s accepted "
+ "and rewritten\n", raw_sender);
+ }
+ /* The function moan_smtp_batch() does not return. */
+ else
+ moan_smtp_batch(smtp_cmd_buffer, "501 sender address must contain "
+ "a domain");
+ break;
/* The RCPT TO command requires an address as an operand. All we do
extracted address. */
case RCPT_CMD:
- if (sender_address == NULL)
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "503 No sender yet given");
+ if (!sender_address)
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "503 No sender yet given");
- if (smtp_cmd_data[0] == 0)
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "501 RCPT TO must have an address operand");
+ if (smtp_cmd_data[0] == 0)
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer,
+ "501 RCPT TO must have an address operand");
- /* Check maximum number allowed */
+ /* Check maximum number allowed */
- if (recipients_max > 0 && recipients_count + 1 > recipients_max)
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "%s too many recipients",
- recipients_max_reject? "552": "452");
+ if (recipients_max > 0 && recipients_count + 1 > recipients_max)
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "%s too many recipients",
+ recipients_max_reject? "552": "452");
- /* Apply SMTP rewrite, then extract address. Don't allow "<>" as a
- recipient address */
+ /* Apply SMTP rewrite, then extract address. Don't allow "<>" as a
+ recipient address */
- recipient = rewrite_existflags & rewrite_smtp
- ? rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
- global_rewrite_rules)
- : smtp_cmd_data;
+ recipient = rewrite_existflags & rewrite_smtp
+ /* deconst ok as smtp_cmd_data was not const */
+ ? US rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
+ global_rewrite_rules)
+ : smtp_cmd_data;
- recipient = parse_extract_address(recipient, &errmess, &start, &end,
- &recipient_domain, FALSE);
+ recipient = parse_extract_address(recipient, &errmess, &start, &end,
+ &recipient_domain, FALSE);
- if (!recipient)
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "501 %s", errmess);
+ if (!recipient)
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "501 %s", errmess);
- /* If the recipient address is unqualified, qualify it if permitted. Then
- add it to the list of recipients. */
+ /* If the recipient address is unqualified, qualify it if permitted. Then
+ add it to the list of recipients. */
- if (recipient_domain == 0)
- {
- if (allow_unqualified_recipient)
- {
- DEBUG(D_receive) debug_printf("unqualified address %s accepted\n",
- recipient);
- recipient = rewrite_address_qualify(recipient, TRUE);
- }
- /* The function moan_smtp_batch() does not return. */
- else moan_smtp_batch(smtp_cmd_buffer, "501 recipient address must contain "
- "a domain");
- }
- receive_add_recipient(recipient, -1);
- break;
+ if (!recipient_domain)
+ if (f.allow_unqualified_recipient)
+ {
+ DEBUG(D_receive) debug_printf("unqualified address %s accepted\n",
+ recipient);
+ /* deconst ok as recipient was not const */
+ recipient = US rewrite_address_qualify(recipient, TRUE);
+ }
+ /* The function moan_smtp_batch() does not return. */
+ else
+ moan_smtp_batch(smtp_cmd_buffer,
+ "501 recipient address must contain a domain");
+
+ receive_add_recipient(recipient, -1);
+ break;
/* The DATA command is legal only if it follows successful MAIL FROM
command is encountered. */
case DATA_CMD:
- if (sender_address == NULL || recipients_count <= 0)
- {
- /* The function moan_smtp_batch() does not return. */
- if (sender_address == NULL)
- moan_smtp_batch(smtp_cmd_buffer,
- "503 MAIL FROM:<sender> command must precede DATA");
+ if (!sender_address || recipients_count <= 0)
+ /* The function moan_smtp_batch() does not return. */
+ if (!sender_address)
+ moan_smtp_batch(smtp_cmd_buffer,
+ "503 MAIL FROM:<sender> command must precede DATA");
+ else
+ moan_smtp_batch(smtp_cmd_buffer,
+ "503 RCPT TO:<recipient> must precede DATA");
else
- moan_smtp_batch(smtp_cmd_buffer,
- "503 RCPT TO:<recipient> must precede DATA");
- }
- else
- {
- done = 3; /* DATA successfully achieved */
- message_ended = END_NOTENDED; /* Indicate in middle of message */
- }
- break;
+ {
+ done = 3; /* DATA successfully achieved */
+ message_ended = END_NOTENDED; /* Indicate in middle of message */
+ }
+ break;
/* The VRFY, EXPN, HELP, ETRN, and NOOP commands are ignored. */
case HELP_CMD:
case NOOP_CMD:
case ETRN_CMD:
- bsmtp_transaction_linecount = receive_linecount;
- break;
+ bsmtp_transaction_linecount = receive_linecount;
+ break;
- case EOF_CMD:
case QUIT_CMD:
- done = 2;
- break;
+ f.smtp_in_quit = TRUE;
+ case EOF_CMD:
+ done = 2;
+ break;
case BADARG_CMD:
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "501 Unexpected argument data");
- break;
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "501 Unexpected argument data");
+ break;
case BADCHAR_CMD:
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "501 Unexpected NULL in SMTP command");
- break;
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "501 Unexpected NULL in SMTP command");
+ break;
default:
- /* The function moan_smtp_batch() does not return. */
- moan_smtp_batch(smtp_cmd_buffer, "500 Command unrecognized");
- break;
+ /* The function moan_smtp_batch() does not return. */
+ moan_smtp_batch(smtp_cmd_buffer, "500 Command unrecognized");
+ break;
}
}
+#ifndef DISABLE_TLS
+static BOOL
+smtp_log_tls_fail(const uschar * errstr)
+{
+const uschar * conn_info = smtp_get_connection_info();
+
+if (Ustrncmp(conn_info, US"SMTP ", 5) == 0) conn_info += 5;
+/* I'd like to get separated H= here, but too hard for now */
+
+log_write(0, LOG_MAIN, "TLS error on %s %s", conn_info, errstr);
+return FALSE;
+}
+#endif
+
+
+
+
+#ifdef TCP_FASTOPEN
+static void
+tfo_in_check(void)
+{
+# ifdef __FreeBSD__
+int is_fastopen;
+socklen_t len = sizeof(is_fastopen);
+
+/* The tinfo TCPOPT_FAST_OPEN bit seems unreliable, and we don't see state
+TCP_SYN_RCV (as of 12.1) so no idea about data-use. */
+
+if (getsockopt(fileno(smtp_out), IPPROTO_TCP, TCP_FASTOPEN, &is_fastopen, &len) == 0)
+ {
+ if (is_fastopen)
+ {
+ DEBUG(D_receive)
+ debug_printf("TFO mode connection (TCP_FASTOPEN getsockopt)\n");
+ f.tcp_in_fastopen = TRUE;
+ }
+ }
+else DEBUG(D_receive)
+ debug_printf("TCP_INFO getsockopt: %s\n", strerror(errno));
+
+# elif defined(TCP_INFO)
+struct tcp_info tinfo;
+socklen_t len = sizeof(tinfo);
+
+if (getsockopt(fileno(smtp_out), IPPROTO_TCP, TCP_INFO, &tinfo, &len) == 0)
+# ifdef TCPI_OPT_SYN_DATA /* FreeBSD 11,12 do not seem to have this yet */
+ if (tinfo.tcpi_options & TCPI_OPT_SYN_DATA)
+ {
+ DEBUG(D_receive)
+ debug_printf("TFO mode connection (ACKd data-on-SYN)\n");
+ f.tcp_in_fastopen_data = f.tcp_in_fastopen = TRUE;
+ }
+ else
+# endif
+ if (tinfo.tcpi_state == TCP_SYN_RECV) /* Not seen on FreeBSD 12.1 */
+ {
+ DEBUG(D_receive)
+ debug_printf("TFO mode connection (state TCP_SYN_RECV)\n");
+ f.tcp_in_fastopen = TRUE;
+ }
+else DEBUG(D_receive)
+ debug_printf("TCP_INFO getsockopt: %s\n", strerror(errno));
+# endif
+}
+#endif
+
+
/*************************************************
* Start an SMTP session *
*************************************************/
BOOL
smtp_start_session(void)
{
-int size = 256;
-int ptr, esclen;
+int esclen;
uschar *user_msg, *log_msg;
uschar *code, *esc;
-uschar *p, *s, *ss;
+uschar *p, *s;
+gstring * ss;
-smtp_connection_start = time(NULL);
+gettimeofday(&smtp_connection_start, NULL);
for (smtp_ch_index = 0; smtp_ch_index < SMTP_HBUFF_SIZE; smtp_ch_index++)
smtp_connection_had[smtp_ch_index] = SCH_NONE;
smtp_ch_index = 0;
/* Default values for certain variables */
-helo_seen = esmtp = helo_accept_junk = FALSE;
+fl.helo_seen = fl.esmtp = fl.helo_accept_junk = FALSE;
smtp_mailcmd_count = 0;
count_nonmail = TRUE_UNSET;
synprot_error_count = unknown_command_count = nonmail_command_count = 0;
smtp_delay_mail = smtp_rlm_base;
-auth_advertised = FALSE;
-pipelining_advertised = FALSE;
-pipelining_enable = TRUE;
+fl.auth_advertised = FALSE;
+f.smtp_in_pipelining_advertised = f.smtp_in_pipelining_used = FALSE;
+f.pipelining_enable = TRUE;
sync_cmd_limit = NON_SYNC_CMD_NON_PIPELINING;
-smtp_exit_function_called = FALSE; /* For avoiding loop in not-quit exit */
+fl.smtp_exit_function_called = FALSE; /* For avoiding loop in not-quit exit */
/* If receiving by -bs from a trusted user, or testing with -bh, we allow
authentication settings from -oMaa to remain in force. */
-if (!host_checking && !sender_host_notsocket) sender_host_authenticated = NULL;
+if (!host_checking && !f.sender_host_notsocket)
+ sender_host_auth_pubname = sender_host_authenticated = NULL;
authenticated_by = NULL;
-#ifdef SUPPORT_TLS
-tls_in.cipher = tls_in.peerdn = NULL;
+#ifndef DISABLE_TLS
+tls_in.ver = tls_in.cipher = tls_in.peerdn = NULL;
tls_in.ourcert = tls_in.peercert = NULL;
tls_in.sni = NULL;
tls_in.ocsp = OCSP_NOT_REQ;
-tls_advertised = FALSE;
+fl.tls_advertised = FALSE;
#endif
-dsn_advertised = FALSE;
+fl.dsn_advertised = FALSE;
#ifdef SUPPORT_I18N
-smtputf8_advertised = FALSE;
+fl.smtputf8_advertised = FALSE;
#endif
/* Reset ACL connection variables */
acl_var_c = NULL;
-/* Allow for trailing 0 in the command and data buffers. */
+/* Allow for trailing 0 in the command and data buffers. Tainted. */
-if (!(smtp_cmd_buffer = US malloc(2*smtp_cmd_buffer_size + 2)))
- log_write(0, LOG_MAIN|LOG_PANIC_DIE,
- "malloc() failed for SMTP command buffer");
+smtp_cmd_buffer = store_get_perm(2*SMTP_CMD_BUFFER_SIZE + 2, GET_TAINTED);
smtp_cmd_buffer[0] = 0;
-smtp_data_buffer = smtp_cmd_buffer + smtp_cmd_buffer_size + 1;
+smtp_data_buffer = smtp_cmd_buffer + SMTP_CMD_BUFFER_SIZE + 1;
/* For batched input, the protocol setting can be overridden from the
command line by a trusted caller. */
/* Set up the buffer for inputting using direct read() calls, and arrange to
call the local functions instead of the standard C ones. */
-if (!(smtp_inbuffer = (uschar *)malloc(in_buffer_size)))
- log_write(0, LOG_MAIN|LOG_PANIC_DIE, "malloc() failed for SMTP input buffer");
+smtp_buf_init();
receive_getc = smtp_getc;
+receive_getbuf = smtp_getbuf;
receive_get_cache = smtp_get_cache;
+receive_hasc = smtp_hasc;
receive_ungetc = smtp_ungetc;
receive_feof = smtp_feof;
receive_ferror = smtp_ferror;
-receive_smtp_buffered = smtp_buffered;
-smtp_inptr = smtp_inend = smtp_inbuffer;
-smtp_had_eof = smtp_had_error = 0;
+lwr_receive_getc = NULL;
+lwr_receive_getbuf = NULL;
+lwr_receive_hasc = NULL;
+lwr_receive_ungetc = NULL;
/* Set up the message size limit; this may be host-specific */
thismessage_size_limit = expand_string_integer(message_size_limit, TRUE);
-if (expand_string_message != NULL)
+if (expand_string_message)
{
if (thismessage_size_limit == -1)
log_write(0, LOG_MAIN|LOG_PANIC, "unable to expand message_size_limit: "
If smtp_accept_max and smtp_accept_reserve are set, keep some connections in
reserve for certain hosts and/or networks. */
-if (!sender_host_unknown)
+if (!f.sender_host_unknown)
{
int rc;
BOOL reserved_host = FALSE;
How to do this properly in IPv6 is not yet known. */
- #if !HAVE_IPV6 && !defined(NO_IP_OPTIONS)
+#if !HAVE_IPV6 && !defined(NO_IP_OPTIONS)
#ifdef GLIBC_IP_OPTIONS
#if (!defined __GLIBC__) || (__GLIBC__ < 2)
#define OPTSTYLE 3
#endif
- if (!host_checking && !sender_host_notsocket)
+ if (!host_checking && !f.sender_host_notsocket)
{
#if OPTSTYLE == 1
EXIM_SOCKLEN_T optlen = sizeof(struct ip_options) + MAX_IPOPTLEN;
- struct ip_options *ipopt = store_get(optlen);
+ struct ip_options *ipopt = store_get(optlen, GET_UNTAINTED);
#elif OPTSTYLE == 2
struct ip_opts ipoptblock;
struct ip_opts *ipopt = &ipoptblock;
DEBUG(D_receive) debug_printf("checking for IP options\n");
- if (getsockopt(fileno(smtp_out), IPPROTO_IP, IP_OPTIONS, (uschar *)(ipopt),
+ if (getsockopt(fileno(smtp_out), IPPROTO_IP, IP_OPTIONS, US (ipopt),
&optlen) < 0)
{
if (errno != ENOPROTOOPT)
{
log_write(0, LOG_MAIN, "getsockopt() failed from %s: %s",
host_and_ident(FALSE), strerror(errno));
- smtp_printf("451 SMTP service not available\r\n");
+ smtp_printf("451 SMTP service not available\r\n", FALSE);
return FALSE;
}
}
{
uschar *p = big_buffer;
uschar *pend = big_buffer + big_buffer_size;
- uschar *opt, *adptr;
+ uschar *adptr;
int optcount;
struct in_addr addr;
#if OPTSTYLE == 1
- uschar *optstart = (uschar *)(ipopt->__data);
+ uschar *optstart = US (ipopt->__data);
#elif OPTSTYLE == 2
- uschar *optstart = (uschar *)(ipopt->ip_opts);
+ uschar *optstart = US (ipopt->ip_opts);
#else
- uschar *optstart = (uschar *)(ipopt->ipopt_list);
+ uschar *optstart = US (ipopt->ipopt_list);
#endif
DEBUG(D_receive) debug_printf("IP options exist\n");
Ustrcpy(p, "IP options on incoming call:");
p += Ustrlen(p);
- for (opt = optstart; opt != NULL &&
- opt < (uschar *)(ipopt) + optlen;)
- {
+ for (uschar * opt = optstart; opt && opt < US (ipopt) + optlen; )
switch (*opt)
{
case IPOPT_EOL:
default:
{
- int i;
if (pend - p < 4 + 3*opt[1]) { opt = NULL; break; }
Ustrcat(p, "[ ");
p += 2;
- for (i = 0; i < opt[1]; i++)
- {
- sprintf(CS p, "%2.2x ", opt[i]);
- p += 3;
- }
+ for (int i = 0; i < opt[1]; i++)
+ p += sprintf(CS p, "%2.2x ", opt[i]);
*p++ = ']';
}
opt += opt[1];
break;
}
- }
*p = 0;
log_write(0, LOG_MAIN, "%s", big_buffer);
log_write(0, LOG_MAIN|LOG_REJECT,
"connection from %s refused (IP options)", host_and_ident(FALSE));
- smtp_printf("554 SMTP service not available\r\n");
+ smtp_printf("554 SMTP service not available\r\n", FALSE);
return FALSE;
}
else DEBUG(D_receive) debug_printf("no IP options found\n");
}
- #endif /* HAVE_IPV6 && !defined(NO_IP_OPTIONS) */
+#endif /* HAVE_IPV6 && !defined(NO_IP_OPTIONS) */
/* Set keep-alive in socket options. The option is on by default. This
setting is an attempt to get rid of some hanging connections that stick in
read() when the remote end (usually a dialup) goes away. */
- if (smtp_accept_keepalive && !sender_host_notsocket)
+ if (smtp_accept_keepalive && !f.sender_host_notsocket)
ip_keepalive(fileno(smtp_out), sender_host_address, FALSE);
/* If the current host matches host_lookup, set the name by doing a
"bad value for smtp_receive_timeout: '%s'", exp ? exp : US"");
}
- /* Start up TLS if tls_on_connect is set. This is for supporting the legacy
- smtps port for use with older style SSL MTAs. */
-
- #ifdef SUPPORT_TLS
- if (tls_in.on_connect && tls_server_start(tls_require_ciphers) != OK)
- return FALSE;
- #endif
-
/* Test for explicit connection rejection */
if (verify_check_host(&host_reject_connection) == OK)
{
log_write(L_connection_reject, LOG_MAIN|LOG_REJECT, "refused connection "
"from %s (host_reject_connection)", host_and_ident(FALSE));
- smtp_printf("554 SMTP service not available\r\n");
+ smtp_printf("554 SMTP service not available\r\n", FALSE);
return FALSE;
}
value of errno is 0 or ENOENT (which happens if /etc/hosts.{allow,deny} does
not exist). */
- #ifdef USE_TCP_WRAPPERS
+#ifdef USE_TCP_WRAPPERS
errno = 0;
- tcp_wrappers_name = expand_string(tcp_wrappers_daemon_name);
- if (tcp_wrappers_name == NULL)
- {
+ if (!(tcp_wrappers_name = expand_string(tcp_wrappers_daemon_name)))
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Expansion of \"%s\" "
"(tcp_wrappers_name) failed: %s", string_printing(tcp_wrappers_name),
expand_string_message);
- }
+
if (!hosts_ctl(tcp_wrappers_name,
- (sender_host_name == NULL)? STRING_UNKNOWN : CS sender_host_name,
- (sender_host_address == NULL)? STRING_UNKNOWN : CS sender_host_address,
- (sender_ident == NULL)? STRING_UNKNOWN : CS sender_ident))
+ sender_host_name ? CS sender_host_name : STRING_UNKNOWN,
+ sender_host_address ? CS sender_host_address : STRING_UNKNOWN,
+ sender_ident ? CS sender_ident : STRING_UNKNOWN))
{
if (errno == 0 || errno == ENOENT)
{
log_write(L_connection_reject,
LOG_MAIN|LOG_REJECT, "refused connection from %s "
"(tcp wrappers)", host_and_ident(FALSE));
- smtp_printf("554 SMTP service not available\r\n");
+ smtp_printf("554 SMTP service not available\r\n", FALSE);
}
else
{
log_write(L_connection_reject,
LOG_MAIN|LOG_REJECT, "temporarily refused connection from %s "
"(tcp wrappers errno=%d)", host_and_ident(FALSE), save_errno);
- smtp_printf("451 Temporary local problem - please try later\r\n");
+ smtp_printf("451 Temporary local problem - please try later\r\n", FALSE);
}
return FALSE;
}
- #endif
+#endif
/* Check for reserved slots. The value of smtp_accept_count has already been
incremented to include this process. */
host_and_ident(FALSE), smtp_accept_count - 1, smtp_accept_max,
smtp_accept_reserve, (rc == DEFER)? " (lookup deferred)" : "");
smtp_printf("421 %s: Too many concurrent SMTP connections; "
- "please try again later\r\n", smtp_active_hostname);
+ "please try again later\r\n", FALSE, smtp_active_hostname);
return FALSE;
}
reserved_host = TRUE;
LOG_MAIN, "temporarily refused connection from %s: not in "
"reserve list and load average = %.2f", host_and_ident(FALSE),
(double)load_average/1000.0);
- smtp_printf("421 %s: Too much load; please try again later\r\n",
+ smtp_printf("421 %s: Too much load; please try again later\r\n", FALSE,
smtp_active_hostname);
return FALSE;
}
addresses in the headers. For a site that permits no qualification, this
won't take long, however. */
- allow_unqualified_sender =
+ f.allow_unqualified_sender =
verify_check_host(&sender_unqualified_hosts) == OK;
- allow_unqualified_recipient =
+ f.allow_unqualified_recipient =
verify_check_host(&recipient_unqualified_hosts) == OK;
/* Determine whether HELO/EHLO is required for this host. The requirement
can be hard or soft. */
- helo_required = verify_check_host(&helo_verify_hosts) == OK;
- if (!helo_required)
- helo_verify = verify_check_host(&helo_try_verify_hosts) == OK;
+ fl.helo_verify_required = verify_check_host(&helo_verify_hosts) == OK;
+ if (!fl.helo_verify_required)
+ fl.helo_verify = verify_check_host(&helo_try_verify_hosts) == OK;
/* Determine whether this hosts is permitted to send syntactic junk
after a HELO or EHLO command. */
- helo_accept_junk = verify_check_host(&helo_accept_junk_hosts) == OK;
+ fl.helo_accept_junk = verify_check_host(&helo_accept_junk_hosts) == OK;
}
/* For batch SMTP input we are now done. */
if (smtp_batched_input) return TRUE;
-#ifdef SUPPORT_PROXY
/* If valid Proxy Protocol source is connecting, set up session.
- * Failure will not allow any SMTP function other than QUIT. */
+Failure will not allow any SMTP function other than QUIT. */
+
+#ifdef SUPPORT_PROXY
proxy_session = FALSE;
-proxy_session_failed = FALSE;
+f.proxy_session_failed = FALSE;
if (check_proxy_protocol_host())
- if (!setup_proxy_protocol_host())
- {
- proxy_session_failed = TRUE;
- DEBUG(D_receive)
- debug_printf("Failure to extract proxied host, only QUIT allowed\n");
- }
- else
- {
- sender_host_name = NULL;
- (void)host_name_lookup();
- host_build_sender_fullhost();
- }
+ setup_proxy_protocol_host();
+#endif
+
+/* Start up TLS if tls_on_connect is set. This is for supporting the legacy
+smtps port for use with older style SSL MTAs. */
+
+#ifndef DISABLE_TLS
+if (tls_in.on_connect)
+ {
+ if (tls_server_start(&user_msg) != OK)
+ return smtp_log_tls_fail(user_msg);
+ cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = TRUE;
+ }
#endif
-/* Run the ACL if it exists */
+/* Run the connect ACL if it exists */
user_msg = NULL;
if (acl_smtp_connect)
p = s + Ustrlen(s);
while (p > s && isspace(p[-1])) p--;
-*p = 0;
+s = string_copyn(s, p-s);
/* It seems that CC:Mail is braindead, and assumes that the greeting message
is all contained in a single IP packet. The original code wrote out the
first, and output it in one fell swoop. This gives a better chance of it
ending up as a single packet. */
-ss = store_get(size);
-ptr = 0;
+ss = string_get(256);
p = s;
do /* At least once, in case we have an empty string */
{
int len;
uschar *linebreak = Ustrchr(p, '\n');
- ss = string_catn(ss, &size, &ptr, code, 3);
- if (linebreak == NULL)
+ ss = string_catn(ss, code, 3);
+ if (!linebreak)
{
len = Ustrlen(p);
- ss = string_catn(ss, &size, &ptr, US" ", 1);
+ ss = string_catn(ss, US" ", 1);
}
else
{
len = linebreak - p;
- ss = string_catn(ss, &size, &ptr, US"-", 1);
+ ss = string_catn(ss, US"-", 1);
}
- ss = string_catn(ss, &size, &ptr, esc, esclen);
- ss = string_catn(ss, &size, &ptr, p, len);
- ss = string_catn(ss, &size, &ptr, US"\r\n", 2);
+ ss = string_catn(ss, esc, esclen);
+ ss = string_catn(ss, p, len);
+ ss = string_catn(ss, US"\r\n", 2);
p += len;
- if (linebreak != NULL) p++;
+ if (linebreak) p++;
}
-while (*p != 0);
-
-ss[ptr] = 0; /* string_cat leaves room for this */
+while (*p);
/* Before we write the banner, check that there is no input pending, unless
this synchronisation check is disabled. */
+#ifndef DISABLE_PIPE_CONNECT
+fl.pipe_connect_acceptable =
+ sender_host_address && verify_check_host(&pipe_connect_advertise_hosts) == OK;
+
if (!check_sync())
- {
- log_write(0, LOG_MAIN|LOG_REJECT, "SMTP protocol "
- "synchronization error (input sent without waiting for greeting): "
- "rejected connection from %s input=\"%s\"", host_and_ident(TRUE),
- string_printing(smtp_inptr));
- smtp_printf("554 SMTP synchronization error\r\n");
- return FALSE;
- }
+ if (fl.pipe_connect_acceptable)
+ f.smtp_in_early_pipe_used = TRUE;
+ else
+#else
+if (!check_sync())
+#endif
+ {
+ unsigned n = smtp_inend - smtp_inptr;
+ if (n > 128) n = 128;
+
+ log_write(0, LOG_MAIN|LOG_REJECT, "SMTP protocol "
+ "synchronization error (input sent without waiting for greeting): "
+ "rejected connection from %s input=\"%s\"", host_and_ident(TRUE),
+ string_printing(string_copyn(smtp_inptr, n)));
+ smtp_printf("554 SMTP synchronization error\r\n", FALSE);
+ return FALSE;
+ }
/* Now output the banner */
+/*XXX the ehlo-resp code does its own tls/nontls bit. Maybe subroutine that? */
+
+smtp_printf("%s",
+#ifndef DISABLE_PIPE_CONNECT
+ fl.pipe_connect_acceptable && pipeline_connect_sends(),
+#else
+ FALSE,
+#endif
+ string_from_gstring(ss));
+
+/* Attempt to see if we sent the banner before the last ACK of the 3-way
+handshake arrived. If so we must have managed a TFO. */
+
+#ifdef TCP_FASTOPEN
+if (sender_host_address && !f.sender_host_notsocket) tfo_in_check();
+#endif
-smtp_printf("%s", ss);
return TRUE;
}
int yield = -1;
log_write(type, LOG_MAIN, "SMTP %s error in \"%s\" %s %s",
- (type == L_smtp_syntax_error)? "syntax" : "protocol",
+ type == L_smtp_syntax_error ? "syntax" : "protocol",
string_printing(smtp_cmd_buffer), host_and_ident(TRUE), errmess);
if (++synprot_error_count > smtp_max_synprot_errors)
{
yield = 1;
log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
- "syntax or protocol errors (last command was \"%s\")",
- host_and_ident(FALSE), string_printing(smtp_cmd_buffer));
+ "syntax or protocol errors (last command was \"%s\", %s)",
+ host_and_ident(FALSE), string_printing(smtp_cmd_buffer),
+ string_from_gstring(s_connhad_log(NULL))
+ );
}
if (code > 0)
{
- smtp_printf("%d%c%s%s%s\r\n", code, (yield == 1)? '-' : ' ',
- (data == NULL)? US"" : data, (data == NULL)? US"" : US": ", errmess);
+ smtp_printf("%d%c%s%s%s\r\n", FALSE, code, yield == 1 ? '-' : ' ',
+ data ? data : US"", data ? US": " : US"", errmess);
if (yield == 1)
- smtp_printf("%d Too many syntax or protocol errors\r\n", code);
+ smtp_printf("%d Too many syntax or protocol errors\r\n", FALSE, code);
}
return yield;
int esclen = 0;
uschar *esc = US"";
-if (!final && no_multiline_responses) return;
+if (!final && f.no_multiline_responses) return;
if (codelen > 4)
{
do it that way, so as not to have to mess with the code for the RCPT command,
which sometimes uses smtp_printf() and sometimes smtp_respond(). */
-if (rcpt_in_progress)
+if (fl.rcpt_in_progress)
{
- if (rcpt_smtp_response == NULL)
+ if (!rcpt_smtp_response)
rcpt_smtp_response = string_copy(msg);
- else if (rcpt_smtp_response_same &&
+ else if (fl.rcpt_smtp_response_same &&
Ustrcmp(rcpt_smtp_response, msg) != 0)
- rcpt_smtp_response_same = FALSE;
- rcpt_in_progress = FALSE;
+ fl.rcpt_smtp_response_same = FALSE;
+ fl.rcpt_in_progress = FALSE;
}
-/* Not output the message, splitting it up into multiple lines if necessary. */
+/* Now output the message, splitting it up into multiple lines if necessary.
+We only handle pipelining these responses as far as nonfinal/final groups,
+not the whole MAIL/RCPT/DATA response set. */
for (;;)
{
uschar *nl = Ustrchr(msg, '\n');
- if (nl == NULL)
+ if (!nl)
{
- smtp_printf("%.3s%c%.*s%s\r\n", code, final? ' ':'-', esclen, esc, msg);
+ smtp_printf("%.3s%c%.*s%s\r\n", !final, code, final ? ' ':'-', esclen, esc, msg);
return;
}
- else if (nl[1] == 0 || no_multiline_responses)
+ else if (nl[1] == 0 || f.no_multiline_responses)
{
- smtp_printf("%.3s%c%.*s%.*s\r\n", code, final? ' ':'-', esclen, esc,
+ smtp_printf("%.3s%c%.*s%.*s\r\n", !final, code, final ? ' ':'-', esclen, esc,
(int)(nl - msg), msg);
return;
}
else
{
- smtp_printf("%.3s-%.*s%.*s\r\n", code, esclen, esc, (int)(nl - msg), msg);
+ smtp_printf("%.3s-%.*s%.*s\r\n", TRUE, code, esclen, esc, (int)(nl - msg), msg);
msg = nl + 1;
- while (isspace(*msg)) msg++;
+ Uskip_whitespace(&msg);
}
}
}
smtp_message_code(uschar **code, int *codelen, uschar **msg, uschar **log_msg,
BOOL check_valid)
{
-int n;
-int ovector[3];
+uschar * match;
+int len;
-if (!msg || !*msg) return;
-
-if ((n = pcre_exec(regex_smtp_code, NULL, CS *msg, Ustrlen(*msg), 0,
- PCRE_EOPT, ovector, sizeof(ovector)/sizeof(int))) < 0) return;
+if (!msg || !*msg || !regex_match(regex_smtp_code, *msg, -1, &match))
+ return;
+len = Ustrlen(match);
if (check_valid && (*msg)[0] != (*code)[0])
{
log_write(0, LOG_MAIN|LOG_PANIC, "configured error code starts with "
"incorrect digit (expected %c) in \"%s\"", (*code)[0], *msg);
- if (log_msg != NULL && *log_msg == *msg)
- *log_msg = string_sprintf("%s %s", *code, *log_msg + ovector[1]);
+ if (log_msg && *log_msg == *msg)
+ *log_msg = string_sprintf("%s %s", *code, *log_msg + len);
}
else
{
*code = *msg;
- *codelen = ovector[1]; /* Includes final space */
+ *codelen = len; /* Includes final space */
}
-*msg += ovector[1]; /* Chop the code off the message */
+*msg += len; /* Chop the code off the message */
return;
}
/* This function is called when acl_check() fails. As well as calls from within
this module, it is called from receive.c for an ACL after DATA. It sorts out
-logging the incident, and sets up the error response. A message containing
+logging the incident, and sends the error response. A message containing
newlines is turned into a multiline SMTP response, but for logging, only the
first line is used.
uschar *smtp_code;
uschar *lognl;
uschar *sender_info = US"";
-uschar *what =
-#ifdef WITH_CONTENT_SCAN
- where == ACL_WHERE_MIME ? US"during MIME ACL checks" :
-#endif
- where == ACL_WHERE_PREDATA ? US"DATA" :
- where == ACL_WHERE_DATA ? US"after DATA" :
-#ifndef DISABLE_PRDR
- where == ACL_WHERE_PRDR ? US"after DATA PRDR" :
-#endif
- smtp_cmd_data ?
- string_sprintf("%s %s", acl_wherenames[where], smtp_cmd_data) :
- string_sprintf("%s in \"connect\" ACL", acl_wherenames[where]);
+uschar *what;
if (drop) rc = FAIL;
this is what should be logged, so I've changed to logging the unrewritten
address to retain backward compatibility. */
-#ifndef WITH_CONTENT_SCAN
-if (where == ACL_WHERE_RCPT || where == ACL_WHERE_DATA)
-#else
-if (where == ACL_WHERE_RCPT || where == ACL_WHERE_DATA || where == ACL_WHERE_MIME)
+switch (where)
+ {
+#ifdef WITH_CONTENT_SCAN
+ case ACL_WHERE_MIME: what = US"during MIME ACL checks"; break;
+#endif
+ case ACL_WHERE_PREDATA: what = US"DATA"; break;
+ case ACL_WHERE_DATA: what = US"after DATA"; break;
+#ifndef DISABLE_PRDR
+ case ACL_WHERE_PRDR: what = US"after DATA PRDR"; break;
#endif
+ default:
+ {
+ uschar * place = smtp_cmd_data ? smtp_cmd_data : US"in \"connect\" ACL";
+ int lim = 100;
+
+ if (where == ACL_WHERE_AUTH) /* avoid logging auth creds */
+ {
+ uschar * s;
+ for (s = smtp_cmd_data; *s && !isspace(*s); ) s++;
+ lim = s - smtp_cmd_data; /* atop after method */
+ }
+ what = string_sprintf("%s %.*s", acl_wherenames[where], lim, place);
+ }
+ }
+switch (where)
{
- sender_info = string_sprintf("F=<%s>%s%s%s%s ",
- sender_address_unrewritten ? sender_address_unrewritten : sender_address,
- sender_host_authenticated ? US" A=" : US"",
- sender_host_authenticated ? sender_host_authenticated : US"",
- sender_host_authenticated && authenticated_id ? US":" : US"",
- sender_host_authenticated && authenticated_id ? authenticated_id : US""
- );
+ case ACL_WHERE_RCPT:
+ case ACL_WHERE_DATA:
+#ifdef WITH_CONTENT_SCAN
+ case ACL_WHERE_MIME:
+#endif
+ sender_info = string_sprintf("F=<%s>%s%s%s%s ",
+ sender_address_unrewritten ? sender_address_unrewritten : sender_address,
+ sender_host_authenticated ? US" A=" : US"",
+ sender_host_authenticated ? sender_host_authenticated : US"",
+ sender_host_authenticated && authenticated_id ? US":" : US"",
+ sender_host_authenticated && authenticated_id ? authenticated_id : US""
+ );
+ break;
}
/* If there's been a sender verification failure with a specific message, and
if (sender_verified_failed &&
!testflag(sender_verified_failed, af_sverify_told))
{
- BOOL save_rcpt_in_progress = rcpt_in_progress;
- rcpt_in_progress = FALSE; /* So as not to treat these as the error */
+ BOOL save_rcpt_in_progress = fl.rcpt_in_progress;
+ fl.rcpt_in_progress = FALSE; /* So as not to treat these as the error */
setflag(sender_verified_failed, af_sverify_told);
sender_verified_failed->address,
sender_verified_failed->user_message));
- rcpt_in_progress = save_rcpt_in_progress;
+ fl.rcpt_in_progress = save_rcpt_in_progress;
}
/* Sort out text for logging */
be re-implemented in a tidier fashion. */
else
- if (acl_temp_details && user_msg)
+ if (f.acl_temp_details && user_msg)
{
if ( smtp_return_error_details
&& sender_verified_failed
if (log_reject_target != 0)
{
-#ifdef SUPPORT_TLS
- uschar * tls = s_tlslog(NULL, NULL, NULL);
+#ifndef DISABLE_TLS
+ gstring * g = s_tlslog(NULL);
+ uschar * tls = string_from_gstring(g);
if (!tls) tls = US"";
#else
uschar * tls = US"";
uschar *user_msg = NULL;
uschar *log_msg = NULL;
-/* Check for recursive acll */
+/* Check for recursive call */
-if (smtp_exit_function_called)
+if (fl.smtp_exit_function_called)
{
log_write(0, LOG_PANIC, "smtp_notquit_exit() called more than once (%s)",
reason);
return;
}
-smtp_exit_function_called = TRUE;
+fl.smtp_exit_function_called = TRUE;
/* Call the not-QUIT ACL, if there is one, unless no reason is given. */
log_msg);
}
+/* If the connection was dropped, we certainly are no longer talking TLS */
+tls_in.active.sock = -1;
+
/* Write an SMTP response if we are expected to give one. As the default
-responses are all internal, they should always fit in the buffer, but code a
-warning, just in case. Note that string_vformat() still leaves a complete
-string, even if it is incomplete. */
+responses are all internal, they should be reasonable size. */
if (code && defaultrespond)
{
smtp_respond(code, 3, TRUE, user_msg);
else
{
- uschar buffer[128];
+ gstring * g;
va_list ap;
+
va_start(ap, defaultrespond);
- if (!string_vformat(buffer, sizeof(buffer), CS defaultrespond, ap))
- log_write(0, LOG_MAIN|LOG_PANIC, "string too large in smtp_notquit_exit()");
- smtp_printf("%s %s\r\n", code, buffer);
+ g = string_vformat(NULL, SVFMT_EXTEND|SVFMT_REBUFFER, CS defaultrespond, ap);
va_end(ap);
+ smtp_printf("%s %s\r\n", FALSE, code, string_from_gstring(g));
}
mac_smtp_fflush();
}
else if (sender_host_address == NULL)
{
HDEBUG(D_receive) debug_printf("no client IP address: assume success\n");
- helo_verified = TRUE;
+ f.helo_verified = TRUE;
}
/* Deal with the more common case when there is a sending IP address */
else if (sender_helo_name[0] == '[')
{
- helo_verified = Ustrncmp(sender_helo_name+1, sender_host_address,
+ f.helo_verified = Ustrncmp(sender_helo_name+1, sender_host_address,
Ustrlen(sender_host_address)) == 0;
- #if HAVE_IPV6
- if (!helo_verified)
+#if HAVE_IPV6
+ if (!f.helo_verified)
{
if (strncmpic(sender_host_address, US"::ffff:", 7) == 0)
- helo_verified = Ustrncmp(sender_helo_name + 1,
+ f.helo_verified = Ustrncmp(sender_helo_name + 1,
sender_host_address + 7, Ustrlen(sender_host_address) - 7) == 0;
}
- #endif
+#endif
HDEBUG(D_receive)
- { if (helo_verified) debug_printf("matched host address\n"); }
+ { if (f.helo_verified) debug_printf("matched host address\n"); }
}
/* Do a reverse lookup if one hasn't already given a positive or negative
/* If a host name is known, check it and all its aliases. */
if (sender_host_name)
- if ((helo_verified = strcmpic(sender_host_name, sender_helo_name) == 0))
+ if ((f.helo_verified = strcmpic(sender_host_name, sender_helo_name) == 0))
{
sender_helo_dnssec = sender_host_dnssec;
HDEBUG(D_receive) debug_printf("matched host name\n");
{
uschar **aliases = sender_host_aliases;
while (*aliases)
- if ((helo_verified = strcmpic(*aliases++, sender_helo_name) == 0))
+ if ((f.helo_verified = strcmpic(*aliases++, sender_helo_name) == 0))
{
sender_helo_dnssec = sender_host_dnssec;
break;
}
- HDEBUG(D_receive) if (helo_verified)
+ HDEBUG(D_receive) if (f.helo_verified)
debug_printf("matched alias %s\n", *(--aliases));
}
/* Final attempt: try a forward lookup of the helo name */
- if (!helo_verified)
+ if (!f.helo_verified)
{
int rc;
- host_item h;
- dnssec_domains d;
- host_item *hh;
-
- h.name = sender_helo_name;
- h.address = NULL;
- h.mx = MX_NONE;
- h.next = NULL;
- d.request = US"*";
- d.require = US"";
+ host_item h =
+ {.name = sender_helo_name, .address = NULL, .mx = MX_NONE, .next = NULL};
+ dnssec_domains d =
+ {.request = US"*", .require = US""};
HDEBUG(D_receive) debug_printf("getting IP address for %s\n",
sender_helo_name);
- rc = host_find_bydns(&h, NULL, HOST_FIND_BY_A,
+ rc = host_find_bydns(&h, NULL, HOST_FIND_BY_A | HOST_FIND_BY_AAAA,
NULL, NULL, NULL, &d, NULL, NULL);
if (rc == HOST_FOUND || rc == HOST_FOUND_LOCAL)
- for (hh = &h; hh; hh = hh->next)
+ for (host_item * hh = &h; hh; hh = hh->next)
if (Ustrcmp(hh->address, sender_host_address) == 0)
{
- helo_verified = TRUE;
+ f.helo_verified = TRUE;
if (h.dnssec == DS_YES) sender_helo_dnssec = TRUE;
HDEBUG(D_receive)
- {
debug_printf("IP address for %s matches calling address\n"
"Forward DNS security status: %sverified\n",
sender_helo_name, sender_helo_dnssec ? "" : "un");
- }
break;
}
}
}
-if (!helo_verified) helo_verify_failed = TRUE; /* We've tried ... */
+if (!f.helo_verified) f.helo_verify_failed = TRUE; /* We've tried ... */
return yield;
}
static int
-smtp_in_auth(auth_instance *au, uschar ** s, uschar ** ss)
+smtp_in_auth(auth_instance *au, uschar ** smtp_resp, uschar ** errmsg)
{
const uschar *set_id = NULL;
-int rc, i;
+int rc;
+
+/* Set up globals for error messages */
+
+authenticator_name = au->name;
+driver_srcfile = au->srcfile;
+driver_srcline = au->srcline;
/* Run the checking code, passing the remainder of the command line as
data. Initials the $auth<n> variables as empty. Initialize $0 empty and set
authenticated_id. Save this in permanent store, as the working store gets
reset at HELO, RSET, etc. */
-for (i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL;
+for (int i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL;
expand_nmax = 0;
expand_nlength[0] = 0; /* $0 contains nothing */
rc = (au->info->servercode)(au, smtp_cmd_data);
if (au->set_id) set_id = expand_string(au->set_id);
expand_nmax = -1; /* Reset numeric variables */
-for (i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL; /* Reset $auth<n> */
+for (int i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL; /* Reset $auth<n> */
+driver_srcfile = authenticator_name = NULL; driver_srcline = 0;
/* The value of authenticated_id is stored in the spool file and printed in
log lines. It must not contain binary zeros or newline characters. In
switch(rc)
{
case OK:
- if (!au->set_id || set_id) /* Complete success */
- {
- if (set_id) authenticated_id = string_copy_malloc(set_id);
- sender_host_authenticated = au->name;
- authentication_failed = FALSE;
- authenticated_fail_id = NULL; /* Impossible to already be set? */
-
- received_protocol =
- (sender_host_address ? protocols : protocols_local)
- [pextend + pauthed + (tls_in.active >= 0 ? pcrpted:0)];
- *s = *ss = US"235 Authentication succeeded";
- authenticated_by = au;
- break;
- }
+ if (!au->set_id || set_id) /* Complete success */
+ {
+ if (set_id) authenticated_id = string_copy_perm(set_id, TRUE);
+ sender_host_authenticated = au->name;
+ sender_host_auth_pubname = au->public_name;
+ authentication_failed = FALSE;
+ authenticated_fail_id = NULL; /* Impossible to already be set? */
+
+ received_protocol =
+ (sender_host_address ? protocols : protocols_local)
+ [pextend + pauthed + (tls_in.active.sock >= 0 ? pcrpted:0)];
+ *smtp_resp = *errmsg = US"235 Authentication succeeded";
+ authenticated_by = au;
+ break;
+ }
- /* Authentication succeeded, but we failed to expand the set_id string.
- Treat this as a temporary error. */
+ /* Authentication succeeded, but we failed to expand the set_id string.
+ Treat this as a temporary error. */
- auth_defer_msg = expand_string_message;
- /* Fall through */
+ auth_defer_msg = expand_string_message;
+ /* Fall through */
case DEFER:
- if (set_id) authenticated_fail_id = string_copy_malloc(set_id);
- *s = string_sprintf("435 Unable to authenticate at present%s",
- auth_defer_user_msg);
- *ss = string_sprintf("435 Unable to authenticate at present%s: %s",
- set_id, auth_defer_msg);
- break;
+ if (set_id) authenticated_fail_id = string_copy_perm(set_id, TRUE);
+ *smtp_resp = string_sprintf("435 Unable to authenticate at present%s",
+ auth_defer_user_msg);
+ *errmsg = string_sprintf("435 Unable to authenticate at present%s: %s",
+ set_id, auth_defer_msg);
+ break;
case BAD64:
- *s = *ss = US"501 Invalid base64 data";
- break;
+ *smtp_resp = *errmsg = US"501 Invalid base64 data";
+ break;
case CANCELLED:
- *s = *ss = US"501 Authentication cancelled";
- break;
+ *smtp_resp = *errmsg = US"501 Authentication cancelled";
+ break;
case UNEXPECTED:
- *s = *ss = US"553 Initial data not expected";
- break;
+ *smtp_resp = *errmsg = US"553 Initial data not expected";
+ break;
case FAIL:
- if (set_id) authenticated_fail_id = string_copy_malloc(set_id);
- *s = US"535 Incorrect authentication data";
- *ss = string_sprintf("535 Incorrect authentication data%s", set_id);
- break;
+ if (set_id) authenticated_fail_id = string_copy_perm(set_id, TRUE);
+ *smtp_resp = US"535 Incorrect authentication data";
+ *errmsg = string_sprintf("535 Incorrect authentication data%s", set_id);
+ break;
default:
- if (set_id) authenticated_fail_id = string_copy_malloc(set_id);
- *s = US"435 Internal error";
- *ss = string_sprintf("435 Internal error%s: return %d from authentication "
- "check", set_id, rc);
- break;
+ if (set_id) authenticated_fail_id = string_copy_perm(set_id, TRUE);
+ *smtp_resp = US"435 Internal error";
+ *errmsg = string_sprintf("435 Internal error%s: return %d from authentication "
+ "check", set_id, rc);
+ break;
}
return rc;
qualify_recipient(uschar ** recipient, uschar * smtp_cmd_data, uschar * tag)
{
int rd;
-if (allow_unqualified_recipient || strcmpic(*recipient, US"postmaster") == 0)
+if (f.allow_unqualified_recipient || strcmpic(*recipient, US"postmaster") == 0)
{
DEBUG(D_receive) debug_printf("unqualified address %s accepted\n",
*recipient);
rd = Ustrlen(recipient) + 1;
- *recipient = rewrite_address_qualify(*recipient, TRUE);
+ /* deconst ok as *recipient was not const */
+ *recipient = US rewrite_address_qualify(*recipient, TRUE);
return rd;
}
-smtp_printf("501 %s: recipient address must contain a domain\r\n",
+smtp_printf("501 %s: recipient address must contain a domain\r\n", FALSE,
smtp_cmd_data);
log_write(L_smtp_syntax_error,
LOG_MAIN|LOG_REJECT, "unqualified %s rejected: <%s> %s%s",
smtp_quit_handler(uschar ** user_msgp, uschar ** log_msgp)
{
HAD(SCH_QUIT);
+f.smtp_in_quit = TRUE;
incomplete_transaction_log(US"QUIT");
-if (acl_smtp_quit)
- {
- int rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, user_msgp, log_msgp);
- if (rc == ERROR)
+if ( acl_smtp_quit
+ && acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, user_msgp, log_msgp)
+ == ERROR)
log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s",
*log_msgp);
- }
+
+#ifdef EXIM_TCP_CORK
+(void) setsockopt(fileno(smtp_out), IPPROTO_TCP, EXIM_TCP_CORK, US &on, sizeof(on));
+#endif
+
if (*user_msgp)
smtp_respond(US"221", 3, TRUE, *user_msgp);
else
- smtp_printf("221 %s closing connection\r\n", smtp_active_hostname);
+ smtp_printf("221 %s closing connection\r\n", FALSE, smtp_active_hostname);
-#ifdef SUPPORT_TLS
-tls_close(TRUE, TRUE);
-#endif
+#ifdef SERVERSIDE_CLOSE_NOWAIT
+# ifndef DISABLE_TLS
+tls_close(NULL, TLS_SHUTDOWN_NOWAIT);
+# endif
+
+log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
+ smtp_get_connection_info());
+#else
+
+# ifndef DISABLE_TLS
+tls_close(NULL, TLS_SHUTDOWN_WAIT);
+# endif
log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
smtp_get_connection_info());
+
+/* Pause, hoping client will FIN first so that they get the TIME_WAIT.
+The socket should become readble (though with no data) */
+
+(void) poll_one_fd(fileno(smtp_in), POLLIN, 200);
+#endif /*!SERVERSIDE_CLOSE_NOWAIT*/
}
{
HAD(SCH_RSET);
incomplete_transaction_log(US"RSET");
-smtp_printf("250 Reset OK\r\n");
+smtp_printf("250 Reset OK\r\n", FALSE);
cmd_list[CMD_LIST_RSET].is_mail_cmd = FALSE;
+if (chunking_state > CHUNKING_OFFERED)
+ chunking_state = CHUNKING_OFFERED;
}
+static int
+expand_mailmax(const uschar * s)
+{
+if (!(s = expand_cstring(s)))
+ log_write(0, LOG_MAIN|LOG_PANIC, "failed to expand smtp_accept_max_per_connection");
+return *s ? Uatoi(s) : 0;
+}
/*************************************************
* Initialize for SMTP incoming message *
BOOL discarded = FALSE;
BOOL last_was_rej_mail = FALSE;
BOOL last_was_rcpt = FALSE;
-void *reset_point = store_get(0);
+rmark reset_point = store_mark();
DEBUG(D_receive) debug_printf("smtp_setup_msg entered\n");
TLS between messages (an Exim client may do this if it has messages queued up
for the host). Note: we do NOT reset AUTH at this point. */
-smtp_reset(reset_point);
+reset_point = smtp_reset(reset_point);
message_ended = END_NOTSTARTED;
-chunking_state = chunking_offered ? CHUNKING_OFFERED : CHUNKING_NOT_OFFERED;
+chunking_state = f.chunking_offered ? CHUNKING_OFFERED : CHUNKING_NOT_OFFERED;
cmd_list[CMD_LIST_RSET].is_mail_cmd = TRUE;
cmd_list[CMD_LIST_HELO].is_mail_cmd = TRUE;
cmd_list[CMD_LIST_EHLO].is_mail_cmd = TRUE;
-#ifdef SUPPORT_TLS
+#ifndef DISABLE_TLS
cmd_list[CMD_LIST_STARTTLS].is_mail_cmd = TRUE;
-cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = TRUE;
#endif
+if (lwr_receive_getc != NULL)
+ {
+ /* This should have already happened, but if we've gotten confused,
+ force a reset here. */
+ DEBUG(D_receive) debug_printf("WARNING: smtp_setup_msg had to restore receive functions to lowers\n");
+ bdat_pop_receive_functions();
+ }
+
/* Set the local signal handler for SIGTERM - it tries to end off tidily */
+had_command_sigterm = 0;
os_non_restarting_signal(SIGTERM, command_sigterm_handler);
/* Batched SMTP is handled in a different function. */
if (smtp_batched_input) return smtp_setup_batch_msg();
-/* Deal with SMTP commands. This loop is exited by setting done to a POSITIVE
+#ifdef TCP_QUICKACK
+if (smtp_in) /* Avoid pure-ACKs while in cmd pingpong phase */
+ (void) setsockopt(fileno(smtp_in), IPPROTO_TCP, TCP_QUICKACK,
+ US &off, sizeof(off));
+#endif
+
+/* Deal with SMTP commands. This loop is exited by setting done to a POSITIVE
value. The values are 2 larger than the required yield of the function. */
while (done <= 0)
void (*oldsignal)(int);
pid_t pid;
int start, end, sender_domain, recipient_domain;
- int ptr, size, rc;
+ int rc;
int c;
- auth_instance *au;
uschar *orcpt = NULL;
- int flags;
+ int dsn_flags;
+ gstring * g;
#ifdef AUTH_TLS
/* Check once per STARTTLS or SSL-on-connect for a TLS AUTH */
- if ( tls_in.active >= 0
+ if ( tls_in.active.sock >= 0
&& tls_in.peercert
&& tls_in.certificate_verified
&& cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd
)
{
cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = FALSE;
- if ( acl_smtp_auth
- && (rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth,
- &user_msg, &log_msg)) != OK
- )
- {
- done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
- continue;
- }
- for (au = auths; au; au = au->next)
+ for (auth_instance * au = auths; au; au = au->next)
if (strcmpic(US"tls", au->driver_name) == 0)
{
- smtp_cmd_data = NULL;
-
- if (smtp_in_auth(au, &s, &ss) == OK)
- { DEBUG(D_auth) debug_printf("tls auth succeeded\n"); }
+ if ( acl_smtp_auth
+ && (rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth,
+ &user_msg, &log_msg)) != OK
+ )
+ done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
else
- { DEBUG(D_auth) debug_printf("tls auth not succeeded\n"); }
+ {
+ smtp_cmd_data = NULL;
+
+ if (smtp_in_auth(au, &s, &ss) == OK)
+ { DEBUG(D_auth) debug_printf("tls auth succeeded\n"); }
+ else
+ {
+ DEBUG(D_auth) debug_printf("tls auth not succeeded\n");
+#ifndef DISABLE_EVENT
+ {
+ uschar * save_name = sender_host_authenticated, * logmsg;
+ sender_host_authenticated = au->name;
+ if ((logmsg = event_raise(event_action, US"auth:fail", s, NULL)))
+ log_write(0, LOG_MAIN, "%s", logmsg);
+ sender_host_authenticated = save_name;
+ }
+#endif
+ }
+ }
break;
}
}
#endif
-#ifdef TCP_QUICKACK
- if (smtp_in) /* Avoid pure-ACKs while in cmd pingpong phase */
- (void) setsockopt(fileno(smtp_in), IPPROTO_TCP, TCP_QUICKACK,
- US &off, sizeof(off));
+ switch(smtp_read_command(
+#ifndef DISABLE_PIPE_CONNECT
+ !fl.pipe_connect_acceptable,
+#else
+ TRUE,
#endif
-
- switch(smtp_read_command(TRUE))
+ GETC_BUFFER_UNLIMITED))
{
/* The AUTH command is not permitted to occur inside a transaction, and may
occur successfully only once per connection. Actually, that isn't quite
AUTHS will eventually hit the nonmail threshold. */
case AUTH_CMD:
- HAD(SCH_AUTH);
- authentication_failed = TRUE;
- cmd_list[CMD_LIST_AUTH].is_mail_cmd = FALSE;
+ HAD(SCH_AUTH);
+ authentication_failed = TRUE;
+ cmd_list[CMD_LIST_AUTH].is_mail_cmd = FALSE;
- if (!auth_advertised && !allow_auth_unadvertised)
- {
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"AUTH command used when not advertised");
- break;
- }
- if (sender_host_authenticated)
- {
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"already authenticated");
- break;
- }
- if (sender_address)
- {
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"not permitted in mail transaction");
- break;
- }
+ if (!fl.auth_advertised && !f.allow_auth_unadvertised)
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"AUTH command used when not advertised");
+ break;
+ }
+ if (sender_host_authenticated)
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"already authenticated");
+ break;
+ }
+ if (sender_address)
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"not permitted in mail transaction");
+ break;
+ }
- /* Check the ACL */
+ /* Check the ACL */
- if ( acl_smtp_auth
- && (rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth,
- &user_msg, &log_msg)) != OK
- )
- {
- done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
- break;
- }
+ if ( acl_smtp_auth
+ && (rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth,
+ &user_msg, &log_msg)) != OK
+ )
+ {
+ done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
+ break;
+ }
- /* Find the name of the requested authentication mechanism. */
+ /* Find the name of the requested authentication mechanism. */
- s = smtp_cmd_data;
- while ((c = *smtp_cmd_data) != 0 && !isspace(c))
- {
- if (!isalnum(c) && c != '-' && c != '_')
- {
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"invalid character in authentication mechanism name");
- goto COMMAND_LOOP;
- }
- smtp_cmd_data++;
- }
+ s = smtp_cmd_data;
+ for (; (c = *smtp_cmd_data) && !isspace(c); smtp_cmd_data++)
+ if (!isalnum(c) && c != '-' && c != '_')
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"invalid character in authentication mechanism name");
+ goto COMMAND_LOOP;
+ }
- /* If not at the end of the line, we must be at white space. Terminate the
- name and move the pointer on to any data that may be present. */
+ /* If not at the end of the line, we must be at white space. Terminate the
+ name and move the pointer on to any data that may be present. */
- if (*smtp_cmd_data != 0)
- {
- *smtp_cmd_data++ = 0;
- while (isspace(*smtp_cmd_data)) smtp_cmd_data++;
- }
+ if (*smtp_cmd_data)
+ {
+ *smtp_cmd_data++ = 0;
+ while (isspace(*smtp_cmd_data)) smtp_cmd_data++;
+ }
- /* Search for an authentication mechanism which is configured for use
- as a server and which has been advertised (unless, sigh, allow_auth_
- unadvertised is set). */
+ /* Search for an authentication mechanism which is configured for use
+ as a server and which has been advertised (unless, sigh, allow_auth_
+ unadvertised is set). */
- for (au = auths; au; au = au->next)
- if (strcmpic(s, au->public_name) == 0 && au->server &&
- (au->advertised || allow_auth_unadvertised))
- break;
+ {
+ auth_instance * au;
+ uschar * smtp_resp, * errmsg;
- if (au)
- {
- c = smtp_in_auth(au, &s, &ss);
+ for (au = auths; au; au = au->next)
+ if (strcmpic(s, au->public_name) == 0 && au->server &&
+ (au->advertised || f.allow_auth_unadvertised))
+ break;
- smtp_printf("%s\r\n", s);
- if (c != OK)
- log_write(0, LOG_MAIN|LOG_REJECT, "%s authenticator failed for %s: %s",
- au->name, host_and_ident(FALSE), ss);
- }
- else
- done = synprot_error(L_smtp_protocol_error, 504, NULL,
- string_sprintf("%s authentication mechanism not supported", s));
+ if (au)
+ {
+ int rc = smtp_in_auth(au, &smtp_resp, &errmsg);
- break; /* AUTH_CMD */
+ smtp_printf("%s\r\n", FALSE, smtp_resp);
+ if (rc != OK)
+ {
+ uschar * logmsg = NULL;
+#ifndef DISABLE_EVENT
+ {uschar * save_name = sender_host_authenticated;
+ sender_host_authenticated = au->name;
+ logmsg = event_raise(event_action, US"auth:fail", smtp_resp, NULL);
+ sender_host_authenticated = save_name;
+ }
+#endif
+ if (logmsg)
+ log_write(0, LOG_MAIN|LOG_REJECT, "%s", logmsg);
+ else
+ log_write(0, LOG_MAIN|LOG_REJECT, "%s authenticator failed for %s: %s",
+ au->name, host_and_ident(FALSE), errmsg);
+ }
+ }
+ else
+ done = synprot_error(L_smtp_protocol_error, 504, NULL,
+ string_sprintf("%s authentication mechanism not supported", s));
+ }
+
+ break; /* AUTH_CMD */
/* The HELO/EHLO commands are permitted to appear in the middle of a
session as well as at the beginning. They have the effect of a reset in
it did the reset first. */
case HELO_CMD:
- HAD(SCH_HELO);
- hello = US"HELO";
- esmtp = FALSE;
- goto HELO_EHLO;
+ HAD(SCH_HELO);
+ hello = US"HELO";
+ fl.esmtp = FALSE;
+ goto HELO_EHLO;
case EHLO_CMD:
- HAD(SCH_EHLO);
- hello = US"EHLO";
- esmtp = TRUE;
+ HAD(SCH_EHLO);
+ hello = US"EHLO";
+ fl.esmtp = TRUE;
HELO_EHLO: /* Common code for HELO and EHLO */
- cmd_list[CMD_LIST_HELO].is_mail_cmd = FALSE;
- cmd_list[CMD_LIST_EHLO].is_mail_cmd = FALSE;
+ cmd_list[CMD_LIST_HELO].is_mail_cmd = FALSE;
+ cmd_list[CMD_LIST_EHLO].is_mail_cmd = FALSE;
- /* Reject the HELO if its argument was invalid or non-existent. A
- successful check causes the argument to be saved in malloc store. */
+ /* Reject the HELO if its argument was invalid or non-existent. A
+ successful check causes the argument to be saved in malloc store. */
- if (!check_helo(smtp_cmd_data))
- {
- smtp_printf("501 Syntactically invalid %s argument(s)\r\n", hello);
+ if (!check_helo(smtp_cmd_data))
+ {
+ smtp_printf("501 Syntactically invalid %s argument(s)\r\n", FALSE, hello);
- log_write(0, LOG_MAIN|LOG_REJECT, "rejected %s from %s: syntactically "
- "invalid argument(s): %s", hello, host_and_ident(FALSE),
- (*smtp_cmd_argument == 0)? US"(no argument given)" :
- string_printing(smtp_cmd_argument));
+ log_write(0, LOG_MAIN|LOG_REJECT, "rejected %s from %s: syntactically "
+ "invalid argument(s): %s", hello, host_and_ident(FALSE),
+ *smtp_cmd_argument == 0 ? US"(no argument given)" :
+ string_printing(smtp_cmd_argument));
- if (++synprot_error_count > smtp_max_synprot_errors)
- {
- log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
- "syntax or protocol errors (last command was \"%s\")",
- host_and_ident(FALSE), string_printing(smtp_cmd_buffer));
- done = 1;
- }
+ if (++synprot_error_count > smtp_max_synprot_errors)
+ {
+ log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
+ "syntax or protocol errors (last command was \"%s\", %s)",
+ host_and_ident(FALSE), string_printing(smtp_cmd_buffer),
+ string_from_gstring(s_connhad_log(NULL))
+ );
+ done = 1;
+ }
- break;
- }
+ break;
+ }
- /* If sender_host_unknown is true, we have got here via the -bs interface,
- not called from inetd. Otherwise, we are running an IP connection and the
- host address will be set. If the helo name is the primary name of this
- host and we haven't done a reverse lookup, force one now. If helo_required
- is set, ensure that the HELO name matches the actual host. If helo_verify
- is set, do the same check, but softly. */
+ /* If sender_host_unknown is true, we have got here via the -bs interface,
+ not called from inetd. Otherwise, we are running an IP connection and the
+ host address will be set. If the helo name is the primary name of this
+ host and we haven't done a reverse lookup, force one now. If helo_verify_required
+ is set, ensure that the HELO name matches the actual host. If helo_verify
+ is set, do the same check, but softly. */
- if (!sender_host_unknown)
- {
- BOOL old_helo_verified = helo_verified;
- uschar *p = smtp_cmd_data;
+ if (!f.sender_host_unknown)
+ {
+ BOOL old_helo_verified = f.helo_verified;
+ uschar *p = smtp_cmd_data;
- while (*p != 0 && !isspace(*p)) { *p = tolower(*p); p++; }
- *p = 0;
+ while (*p != 0 && !isspace(*p)) { *p = tolower(*p); p++; }
+ *p = 0;
- /* Force a reverse lookup if HELO quoted something in helo_lookup_domains
- because otherwise the log can be confusing. */
+ /* Force a reverse lookup if HELO quoted something in helo_lookup_domains
+ because otherwise the log can be confusing. */
- if (sender_host_name == NULL &&
- (deliver_domain = sender_helo_name, /* set $domain */
- match_isinlist(sender_helo_name, CUSS &helo_lookup_domains, 0,
- &domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL)) == OK)
- (void)host_name_lookup();
+ if ( !sender_host_name
+ && match_isinlist(sender_helo_name, CUSS &helo_lookup_domains, 0,
+ &domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL) == OK)
+ (void)host_name_lookup();
- /* Rebuild the fullhost info to include the HELO name (and the real name
- if it was looked up.) */
+ /* Rebuild the fullhost info to include the HELO name (and the real name
+ if it was looked up.) */
- host_build_sender_fullhost(); /* Rebuild */
- set_process_info("handling%s incoming connection from %s",
- (tls_in.active >= 0)? " TLS" : "", host_and_ident(FALSE));
+ host_build_sender_fullhost(); /* Rebuild */
+ set_process_info("handling%s incoming connection from %s",
+ tls_in.active.sock >= 0 ? " TLS" : "", host_and_ident(FALSE));
- /* Verify if configured. This doesn't give much security, but it does
- make some people happy to be able to do it. If helo_required is set,
- (host matches helo_verify_hosts) failure forces rejection. If helo_verify
- is set (host matches helo_try_verify_hosts), it does not. This is perhaps
- now obsolescent, since the verification can now be requested selectively
- at ACL time. */
+ /* Verify if configured. This doesn't give much security, but it does
+ make some people happy to be able to do it. If helo_verify_required is set,
+ (host matches helo_verify_hosts) failure forces rejection. If helo_verify
+ is set (host matches helo_try_verify_hosts), it does not. This is perhaps
+ now obsolescent, since the verification can now be requested selectively
+ at ACL time. */
- helo_verified = helo_verify_failed = sender_helo_dnssec = FALSE;
- if (helo_required || helo_verify)
- {
- BOOL tempfail = !smtp_verify_helo();
- if (!helo_verified)
- {
- if (helo_required)
- {
- smtp_printf("%d %s argument does not match calling host\r\n",
- tempfail? 451 : 550, hello);
- log_write(0, LOG_MAIN|LOG_REJECT, "%srejected \"%s %s\" from %s",
- tempfail? "temporarily " : "",
- hello, sender_helo_name, host_and_ident(FALSE));
- helo_verified = old_helo_verified;
- break; /* End of HELO/EHLO processing */
- }
- HDEBUG(D_all) debug_printf("%s verification failed but host is in "
- "helo_try_verify_hosts\n", hello);
- }
- }
- }
+ f.helo_verified = f.helo_verify_failed = sender_helo_dnssec = FALSE;
+ if (fl.helo_verify_required || fl.helo_verify)
+ {
+ BOOL tempfail = !smtp_verify_helo();
+ if (!f.helo_verified)
+ {
+ if (fl.helo_verify_required)
+ {
+ smtp_printf("%d %s argument does not match calling host\r\n", FALSE,
+ tempfail? 451 : 550, hello);
+ log_write(0, LOG_MAIN|LOG_REJECT, "%srejected \"%s %s\" from %s",
+ tempfail? "temporarily " : "",
+ hello, sender_helo_name, host_and_ident(FALSE));
+ f.helo_verified = old_helo_verified;
+ break; /* End of HELO/EHLO processing */
+ }
+ HDEBUG(D_all) debug_printf("%s verification failed but host is in "
+ "helo_try_verify_hosts\n", hello);
+ }
+ }
+ }
-#ifdef EXPERIMENTAL_SPF
- /* set up SPF context */
- spf_init(sender_helo_name, sender_host_address);
+#ifdef SUPPORT_SPF
+ /* set up SPF context */
+ spf_conn_init(sender_helo_name, sender_host_address);
#endif
- /* Apply an ACL check if one is defined; afterwards, recheck
- synchronization in case the client started sending in a delay. */
+ /* Apply an ACL check if one is defined; afterwards, recheck
+ synchronization in case the client started sending in a delay. */
- if (acl_smtp_helo)
- if ((rc = acl_check(ACL_WHERE_HELO, NULL, acl_smtp_helo,
- &user_msg, &log_msg)) != OK)
- {
- done = smtp_handle_acl_fail(ACL_WHERE_HELO, rc, user_msg, log_msg);
- sender_helo_name = NULL;
- host_build_sender_fullhost(); /* Rebuild */
- break;
- }
- else if (!check_sync()) goto SYNC_FAILURE;
-
- /* Generate an OK reply. The default string includes the ident if present,
- and also the IP address if present. Reflecting back the ident is intended
- as a deterrent to mail forgers. For maximum efficiency, and also because
- some broken systems expect each response to be in a single packet, arrange
- that the entire reply is sent in one write(). */
-
- auth_advertised = FALSE;
- pipelining_advertised = FALSE;
-#ifdef SUPPORT_TLS
- tls_advertised = FALSE;
+ if (acl_smtp_helo)
+ if ((rc = acl_check(ACL_WHERE_HELO, NULL, acl_smtp_helo,
+ &user_msg, &log_msg)) != OK)
+ {
+ done = smtp_handle_acl_fail(ACL_WHERE_HELO, rc, user_msg, log_msg);
+ sender_helo_name = NULL;
+ host_build_sender_fullhost(); /* Rebuild */
+ break;
+ }
+#ifndef DISABLE_PIPE_CONNECT
+ else if (!fl.pipe_connect_acceptable && !check_sync())
+#else
+ else if (!check_sync())
+#endif
+ goto SYNC_FAILURE;
+
+ /* Generate an OK reply. The default string includes the ident if present,
+ and also the IP address if present. Reflecting back the ident is intended
+ as a deterrent to mail forgers. For maximum efficiency, and also because
+ some broken systems expect each response to be in a single packet, arrange
+ that the entire reply is sent in one write(). */
+
+ fl.auth_advertised = FALSE;
+ f.smtp_in_pipelining_advertised = FALSE;
+#ifndef DISABLE_TLS
+ fl.tls_advertised = FALSE;
#endif
- dsn_advertised = FALSE;
+ fl.dsn_advertised = FALSE;
#ifdef SUPPORT_I18N
- smtputf8_advertised = FALSE;
+ fl.smtputf8_advertised = FALSE;
#endif
- smtp_code = US"250 "; /* Default response code plus space*/
- if (user_msg == NULL)
- {
- s = string_sprintf("%.3s %s Hello %s%s%s",
- smtp_code,
- smtp_active_hostname,
- (sender_ident == NULL)? US"" : sender_ident,
- (sender_ident == NULL)? US"" : US" at ",
- (sender_host_name == NULL)? sender_helo_name : sender_host_name);
+ /* Expand the per-connection message count limit option */
+ smtp_mailcmd_max = expand_mailmax(smtp_accept_max_per_connection);
- ptr = Ustrlen(s);
- size = ptr + 1;
+ smtp_code = US"250 "; /* Default response code plus space*/
+ if (!user_msg)
+ {
+ /* sender_host_name below will be tainted, so save on copy when we hit it */
+ g = string_get_tainted(24, GET_TAINTED);
+ g = string_fmt_append(g, "%.3s %s Hello %s%s%s",
+ smtp_code,
+ smtp_active_hostname,
+ sender_ident ? sender_ident : US"",
+ sender_ident ? US" at " : US"",
+ sender_host_name ? sender_host_name : sender_helo_name);
+
+ if (sender_host_address)
+ g = string_fmt_append(g, " [%s]", sender_host_address);
+ }
- if (sender_host_address != NULL)
- {
- s = string_catn(s, &size, &ptr, US" [", 2);
- s = string_cat (s, &size, &ptr, sender_host_address);
- s = string_catn(s, &size, &ptr, US"]", 1);
- }
- }
+ /* A user-supplied EHLO greeting may not contain more than one line. Note
+ that the code returned by smtp_message_code() includes the terminating
+ whitespace character. */
- /* A user-supplied EHLO greeting may not contain more than one line. Note
- that the code returned by smtp_message_code() includes the terminating
- whitespace character. */
+ else
+ {
+ char * ss;
+ int codelen = 4;
+ smtp_message_code(&smtp_code, &codelen, &user_msg, NULL, TRUE);
+ s = string_sprintf("%.*s%s", codelen, smtp_code, user_msg);
+ if ((ss = strpbrk(CS s, "\r\n")) != NULL)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "EHLO/HELO response must not contain "
+ "newlines: message truncated: %s", string_printing(s));
+ *ss = 0;
+ }
+ g = string_cat(NULL, s);
+ }
- else
- {
- char *ss;
- int codelen = 4;
- smtp_message_code(&smtp_code, &codelen, &user_msg, NULL, TRUE);
- s = string_sprintf("%.*s%s", codelen, smtp_code, user_msg);
- if ((ss = strpbrk(CS s, "\r\n")) != NULL)
- {
- log_write(0, LOG_MAIN|LOG_PANIC, "EHLO/HELO response must not contain "
- "newlines: message truncated: %s", string_printing(s));
- *ss = 0;
- }
- ptr = Ustrlen(s);
- size = ptr + 1;
- }
+ g = string_catn(g, US"\r\n", 2);
- s = string_catn(s, &size, &ptr, US"\r\n", 2);
+ /* If we received EHLO, we must create a multiline response which includes
+ the functions supported. */
- /* If we received EHLO, we must create a multiline response which includes
- the functions supported. */
+ if (fl.esmtp)
+ {
+ g->s[3] = '-';
- if (esmtp)
- {
- s[3] = '-';
+ /* I'm not entirely happy with this, as an MTA is supposed to check
+ that it has enough room to accept a message of maximum size before
+ it sends this. However, there seems little point in not sending it.
+ The actual size check happens later at MAIL FROM time. By postponing it
+ till then, VRFY and EXPN can be used after EHLO when space is short. */
- /* I'm not entirely happy with this, as an MTA is supposed to check
- that it has enough room to accept a message of maximum size before
- it sends this. However, there seems little point in not sending it.
- The actual size check happens later at MAIL FROM time. By postponing it
- till then, VRFY and EXPN can be used after EHLO when space is short. */
+ if (thismessage_size_limit > 0)
+ g = string_fmt_append(g, "%.3s-SIZE %d\r\n", smtp_code,
+ thismessage_size_limit);
+ else
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-SIZE\r\n", 7);
+ }
- if (thismessage_size_limit > 0)
- {
- sprintf(CS big_buffer, "%.3s-SIZE %d\r\n", smtp_code,
- thismessage_size_limit);
- s = string_cat(s, &size, &ptr, big_buffer);
- }
- else
- {
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-SIZE\r\n", 7);
- }
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+ if ( (smtp_mailcmd_max > 0 || recipients_max)
+ && verify_check_host(&limits_advertise_hosts) == OK)
+ {
+ g = string_fmt_append(g, "%.3s-LIMITS", smtp_code);
+ if (smtp_mailcmd_max > 0)
+ g = string_fmt_append(g, " MAILMAX=%d", smtp_mailcmd_max);
+ if (recipients_max)
+ g = string_fmt_append(g, " RCPTMAX=%d", recipients_max);
+ g = string_catn(g, US"\r\n", 2);
+ }
+#endif
- /* Exim does not do protocol conversion or data conversion. It is 8-bit
- clean; if it has an 8-bit character in its hand, it just sends it. It
- cannot therefore specify 8BITMIME and remain consistent with the RFCs.
- However, some users want this option simply in order to stop MUAs
- mangling messages that contain top-bit-set characters. It is therefore
- provided as an option. */
+ /* Exim does not do protocol conversion or data conversion. It is 8-bit
+ clean; if it has an 8-bit character in its hand, it just sends it. It
+ cannot therefore specify 8BITMIME and remain consistent with the RFCs.
+ However, some users want this option simply in order to stop MUAs
+ mangling messages that contain top-bit-set characters. It is therefore
+ provided as an option. */
- if (accept_8bitmime)
- {
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-8BITMIME\r\n", 11);
- }
+ if (accept_8bitmime)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-8BITMIME\r\n", 11);
+ }
- /* Advertise DSN support if configured to do so. */
- if (verify_check_host(&dsn_advertise_hosts) != FAIL)
- {
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-DSN\r\n", 6);
- dsn_advertised = TRUE;
- }
+ /* Advertise DSN support if configured to do so. */
+ if (verify_check_host(&dsn_advertise_hosts) != FAIL)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-DSN\r\n", 6);
+ fl.dsn_advertised = TRUE;
+ }
- /* Advertise ETRN/VRFY/EXPN if there's are ACL checking whether a host is
- permitted to issue them; a check is made when any host actually tries. */
+ /* Advertise ETRN/VRFY/EXPN if there's are ACL checking whether a host is
+ permitted to issue them; a check is made when any host actually tries. */
- if (acl_smtp_etrn)
- {
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-ETRN\r\n", 7);
- }
- if (acl_smtp_vrfy)
- {
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-VRFY\r\n", 7);
- }
- if (acl_smtp_expn)
- {
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-EXPN\r\n", 7);
- }
+ if (acl_smtp_etrn)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-ETRN\r\n", 7);
+ }
+ if (acl_smtp_vrfy)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-VRFY\r\n", 7);
+ }
+ if (acl_smtp_expn)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-EXPN\r\n", 7);
+ }
- /* Exim is quite happy with pipelining, so let the other end know that
- it is safe to use it, unless advertising is disabled. */
+ /* Exim is quite happy with pipelining, so let the other end know that
+ it is safe to use it, unless advertising is disabled. */
- if (pipelining_enable &&
- verify_check_host(&pipelining_advertise_hosts) == OK)
- {
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-PIPELINING\r\n", 13);
- sync_cmd_limit = NON_SYNC_CMD_PIPELINING;
- pipelining_advertised = TRUE;
- }
+ if ( f.pipelining_enable
+ && verify_check_host(&pipelining_advertise_hosts) == OK)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-PIPELINING\r\n", 13);
+ sync_cmd_limit = NON_SYNC_CMD_PIPELINING;
+ f.smtp_in_pipelining_advertised = TRUE;
+
+#ifndef DISABLE_PIPE_CONNECT
+ if (fl.pipe_connect_acceptable)
+ {
+ f.smtp_in_early_pipe_advertised = TRUE;
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-" EARLY_PIPE_FEATURE_NAME "\r\n", EARLY_PIPE_FEATURE_LEN+3);
+ }
+#endif
+ }
- /* If any server authentication mechanisms are configured, advertise
- them if the current host is in auth_advertise_hosts. The problem with
- advertising always is that some clients then require users to
- authenticate (and aren't configurable otherwise) even though it may not
- be necessary (e.g. if the host is in host_accept_relay).
+ /* If any server authentication mechanisms are configured, advertise
+ them if the current host is in auth_advertise_hosts. The problem with
+ advertising always is that some clients then require users to
+ authenticate (and aren't configurable otherwise) even though it may not
+ be necessary (e.g. if the host is in host_accept_relay).
- RFC 2222 states that SASL mechanism names contain only upper case
- letters, so output the names in upper case, though we actually recognize
- them in either case in the AUTH command. */
+ RFC 2222 states that SASL mechanism names contain only upper case
+ letters, so output the names in upper case, though we actually recognize
+ them in either case in the AUTH command. */
- if ( auths
+ if ( auths
#ifdef AUTH_TLS
- && !sender_host_authenticated
+ && !sender_host_authenticated
#endif
- && verify_check_host(&auth_advertise_hosts) == OK
- )
- {
- auth_instance *au;
- BOOL first = TRUE;
- for (au = auths; au; au = au->next)
- if (au->server && (au->advertise_condition == NULL ||
- expand_check_condition(au->advertise_condition, au->name,
- US"authenticator")))
+ && verify_check_host(&auth_advertise_hosts) == OK
+ )
+ {
+ BOOL first = TRUE;
+ for (auth_instance * au = auths; au; au = au->next)
{
- int saveptr;
- if (first)
+ au->advertised = FALSE;
+ if (au->server)
{
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-AUTH", 5);
- first = FALSE;
- auth_advertised = TRUE;
+ DEBUG(D_auth+D_expand) debug_printf_indent(
+ "Evaluating advertise_condition for %s %s athenticator\n",
+ au->name, au->public_name);
+ if ( !au->advertise_condition
+ || expand_check_condition(au->advertise_condition, au->name,
+ US"authenticator")
+ )
+ {
+ int saveptr;
+ if (first)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-AUTH", 5);
+ first = FALSE;
+ fl.auth_advertised = TRUE;
+ }
+ saveptr = g->ptr;
+ g = string_catn(g, US" ", 1);
+ g = string_cat (g, au->public_name);
+ while (++saveptr < g->ptr) g->s[saveptr] = toupper(g->s[saveptr]);
+ au->advertised = TRUE;
+ }
}
- saveptr = ptr;
- s = string_catn(s, &size, &ptr, US" ", 1);
- s = string_cat (s, &size, &ptr, au->public_name);
- while (++saveptr < ptr) s[saveptr] = toupper(s[saveptr]);
- au->advertised = TRUE;
}
- else
- au->advertised = FALSE;
- if (!first) s = string_catn(s, &size, &ptr, US"\r\n", 2);
- }
+ if (!first) g = string_catn(g, US"\r\n", 2);
+ }
- /* RFC 3030 CHUNKING */
+ /* RFC 3030 CHUNKING */
- if (verify_check_host(&chunking_advertise_hosts) != FAIL)
- {
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-CHUNKING\r\n", 11);
- chunking_offered = TRUE;
- chunking_state = CHUNKING_OFFERED;
- }
+ if (verify_check_host(&chunking_advertise_hosts) != FAIL)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-CHUNKING\r\n", 11);
+ f.chunking_offered = TRUE;
+ chunking_state = CHUNKING_OFFERED;
+ }
- /* Advertise TLS (Transport Level Security) aka SSL (Secure Socket Layer)
- if it has been included in the binary, and the host matches
- tls_advertise_hosts. We must *not* advertise if we are already in a
- secure connection. */
+ /* Advertise TLS (Transport Level Security) aka SSL (Secure Socket Layer)
+ if it has been included in the binary, and the host matches
+ tls_advertise_hosts. We must *not* advertise if we are already in a
+ secure connection. */
-#ifdef SUPPORT_TLS
- if (tls_in.active < 0 &&
- verify_check_host(&tls_advertise_hosts) != FAIL)
- {
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-STARTTLS\r\n", 11);
- tls_advertised = TRUE;
- }
+#ifndef DISABLE_TLS
+ if (tls_in.active.sock < 0 &&
+ verify_check_host(&tls_advertise_hosts) != FAIL)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-STARTTLS\r\n", 11);
+ fl.tls_advertised = TRUE;
+ }
#endif
#ifndef DISABLE_PRDR
- /* Per Recipient Data Response, draft by Eric A. Hall extending RFC */
- if (prdr_enable)
- {
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-PRDR\r\n", 7);
- }
+ /* Per Recipient Data Response, draft by Eric A. Hall extending RFC */
+ if (prdr_enable)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-PRDR\r\n", 7);
+ }
#endif
#ifdef SUPPORT_I18N
- if ( accept_8bitmime
- && verify_check_host(&smtputf8_advertise_hosts) != FAIL)
- {
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US"-SMTPUTF8\r\n", 11);
- smtputf8_advertised = TRUE;
- }
+ if ( accept_8bitmime
+ && verify_check_host(&smtputf8_advertise_hosts) != FAIL)
+ {
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US"-SMTPUTF8\r\n", 11);
+ fl.smtputf8_advertised = TRUE;
+ }
#endif
- /* Finish off the multiline reply with one that is always available. */
-
- s = string_catn(s, &size, &ptr, smtp_code, 3);
- s = string_catn(s, &size, &ptr, US" HELP\r\n", 7);
- }
-
- /* Terminate the string (for debug), write it, and note that HELO/EHLO
- has been seen. */
+ /* Finish off the multiline reply with one that is always available. */
- s[ptr] = 0;
+ g = string_catn(g, smtp_code, 3);
+ g = string_catn(g, US" HELP\r\n", 7);
+ }
-#ifdef SUPPORT_TLS
- if (tls_in.active >= 0) (void)tls_write(TRUE, s, ptr); else
+ /* Terminate the string (for debug), write it, and note that HELO/EHLO
+ has been seen. */
+
+#ifndef DISABLE_TLS
+ if (tls_in.active.sock >= 0)
+ (void)tls_write(NULL, g->s, g->ptr,
+# ifndef DISABLE_PIPE_CONNECT
+ fl.pipe_connect_acceptable && pipeline_connect_sends());
+# else
+ FALSE);
+# endif
+ else
#endif
+ (void) fwrite(g->s, 1, g->ptr, smtp_out);
- {
- int i = fwrite(s, 1, ptr, smtp_out); i = i; /* compiler quietening */
- }
- DEBUG(D_receive)
- {
- uschar *cr;
- while ((cr = Ustrchr(s, '\r')) != NULL) /* lose CRs */
- memmove(cr, cr + 1, (ptr--) - (cr - s));
- debug_printf("SMTP>> %s", s);
- }
- helo_seen = TRUE;
+ DEBUG(D_receive) for (const uschar * t, * s = string_from_gstring(g);
+ s && (t = Ustrchr(s, '\r'));
+ s = t + 2) /* \r\n */
+ debug_printf("%s %.*s\n",
+ s == g->s ? "SMTP>>" : " ",
+ (int)(t - s), s);
+ fl.helo_seen = TRUE;
- /* Reset the protocol and the state, abandoning any previous message. */
- received_protocol =
- (sender_host_address ? protocols : protocols_local)
- [ (esmtp
- ? pextend + (sender_host_authenticated ? pauthed : 0)
- : pnormal)
- + (tls_in.active >= 0 ? pcrpted : 0)
- ];
- smtp_reset(reset_point);
- toomany = FALSE;
- break; /* HELO/EHLO */
+ /* Reset the protocol and the state, abandoning any previous message. */
+ received_protocol =
+ (sender_host_address ? protocols : protocols_local)
+ [ (fl.esmtp
+ ? pextend + (sender_host_authenticated ? pauthed : 0)
+ : pnormal)
+ + (tls_in.active.sock >= 0 ? pcrpted : 0)
+ ];
+ cancel_cutthrough_connection(TRUE, US"sent EHLO response");
+ reset_point = smtp_reset(reset_point);
+ toomany = FALSE;
+ break; /* HELO/EHLO */
/* The MAIL command requires an address as an operand. All we do
it is the canonical extracted address which is all that is kept. */
case MAIL_CMD:
- HAD(SCH_MAIL);
- smtp_mailcmd_count++; /* Count for limit and ratelimit */
- was_rej_mail = TRUE; /* Reset if accepted */
- env_mail_type_t * mail_args; /* Sanity check & validate args */
-
- if (helo_required && !helo_seen)
- {
- smtp_printf("503 HELO or EHLO required\r\n");
- log_write(0, LOG_MAIN|LOG_REJECT, "rejected MAIL from %s: no "
- "HELO/EHLO given", host_and_ident(FALSE));
- break;
- }
-
- if (sender_address != NULL)
- {
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"sender already given");
- break;
- }
+ HAD(SCH_MAIL);
+ smtp_mailcmd_count++; /* Count for limit and ratelimit */
+ message_start();
+ was_rej_mail = TRUE; /* Reset if accepted */
+ env_mail_type_t * mail_args; /* Sanity check & validate args */
+
+ if (!fl.helo_seen)
+ if ( fl.helo_verify_required
+ || verify_check_host(&hosts_require_helo) == OK)
+ {
+ smtp_printf("503 HELO or EHLO required\r\n", FALSE);
+ log_write(0, LOG_MAIN|LOG_REJECT, "rejected MAIL from %s: no "
+ "HELO/EHLO given", host_and_ident(FALSE));
+ break;
+ }
+ else if (smtp_mailcmd_max < 0)
+ smtp_mailcmd_max = expand_mailmax(smtp_accept_max_per_connection);
- if (smtp_cmd_data[0] == 0)
- {
- done = synprot_error(L_smtp_protocol_error, 501, NULL,
- US"MAIL must have an address operand");
- break;
- }
+ if (sender_address)
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"sender already given");
+ break;
+ }
- /* Check to see if the limit for messages per connection would be
- exceeded by accepting further messages. */
+ if (!*smtp_cmd_data)
+ {
+ done = synprot_error(L_smtp_protocol_error, 501, NULL,
+ US"MAIL must have an address operand");
+ break;
+ }
- if (smtp_accept_max_per_connection > 0 &&
- smtp_mailcmd_count > smtp_accept_max_per_connection)
- {
- smtp_printf("421 too many messages in this connection\r\n");
- log_write(0, LOG_MAIN|LOG_REJECT, "rejected MAIL command %s: too many "
- "messages in one connection", host_and_ident(TRUE));
- break;
- }
+ /* Check to see if the limit for messages per connection would be
+ exceeded by accepting further messages. */
- /* Reset for start of message - even if this is going to fail, we
- obviously need to throw away any previous data. */
+ if (smtp_mailcmd_max > 0 && smtp_mailcmd_count > smtp_mailcmd_max)
+ {
+ smtp_printf("421 too many messages in this connection\r\n", FALSE);
+ log_write(0, LOG_MAIN|LOG_REJECT, "rejected MAIL command %s: too many "
+ "messages in one connection", host_and_ident(TRUE));
+ break;
+ }
- smtp_reset(reset_point);
- toomany = FALSE;
- sender_data = recipient_data = NULL;
+ /* Reset for start of message - even if this is going to fail, we
+ obviously need to throw away any previous data. */
- /* Loop, checking for ESMTP additions to the MAIL FROM command. */
+ cancel_cutthrough_connection(TRUE, US"MAIL received");
+ reset_point = smtp_reset(reset_point);
+ toomany = FALSE;
+ sender_data = recipient_data = NULL;
- if (esmtp) for(;;)
- {
- uschar *name, *value, *end;
- unsigned long int size;
- BOOL arg_error = FALSE;
+ /* Loop, checking for ESMTP additions to the MAIL FROM command. */
- if (!extract_option(&name, &value)) break;
+ if (fl.esmtp) for(;;)
+ {
+ uschar *name, *value, *end;
+ unsigned long int size;
+ BOOL arg_error = FALSE;
- for (mail_args = env_mail_type_list;
- mail_args->value != ENV_MAIL_OPT_NULL;
- mail_args++
- )
- if (strcmpic(name, mail_args->name) == 0)
- break;
- if (mail_args->need_value && strcmpic(value, US"") == 0)
- break;
+ if (!extract_option(&name, &value)) break;
- switch(mail_args->value)
- {
- /* Handle SIZE= by reading the value. We don't do the check till later,
- in order to be able to log the sender address on failure. */
- case ENV_MAIL_OPT_SIZE:
- if (((size = Ustrtoul(value, &end, 10)), *end == 0))
- {
- if ((size == ULONG_MAX && errno == ERANGE) || size > INT_MAX)
- size = INT_MAX;
- message_size = (int)size;
- }
- else
- arg_error = TRUE;
- break;
+ for (mail_args = env_mail_type_list;
+ mail_args->value != ENV_MAIL_OPT_NULL;
+ mail_args++
+ )
+ if (strcmpic(name, mail_args->name) == 0)
+ break;
+ if (mail_args->need_value && strcmpic(value, US"") == 0)
+ break;
- /* If this session was initiated with EHLO and accept_8bitmime is set,
- Exim will have indicated that it supports the BODY=8BITMIME option. In
- fact, it does not support this according to the RFCs, in that it does not
- take any special action for forwarding messages containing 8-bit
- characters. That is why accept_8bitmime is not the default setting, but
- some sites want the action that is provided. We recognize both "8BITMIME"
- and "7BIT" as body types, but take no action. */
- case ENV_MAIL_OPT_BODY:
- if (accept_8bitmime) {
- if (strcmpic(value, US"8BITMIME") == 0)
- body_8bitmime = 8;
- else if (strcmpic(value, US"7BIT") == 0)
- body_8bitmime = 7;
- else
+ switch(mail_args->value)
+ {
+ /* Handle SIZE= by reading the value. We don't do the check till later,
+ in order to be able to log the sender address on failure. */
+ case ENV_MAIL_OPT_SIZE:
+ if (((size = Ustrtoul(value, &end, 10)), *end == 0))
{
- body_8bitmime = 0;
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"invalid data for BODY");
- goto COMMAND_LOOP;
- }
- DEBUG(D_receive) debug_printf("8BITMIME: %d\n", body_8bitmime);
+ if ((size == ULONG_MAX && errno == ERANGE) || size > INT_MAX)
+ size = INT_MAX;
+ message_size = (int)size;
+ }
+ else
+ arg_error = TRUE;
break;
- }
- arg_error = TRUE;
- break;
- /* Handle the two DSN options, but only if configured to do so (which
- will have caused "DSN" to be given in the EHLO response). The code itself
- is included only if configured in at build time. */
+ /* If this session was initiated with EHLO and accept_8bitmime is set,
+ Exim will have indicated that it supports the BODY=8BITMIME option. In
+ fact, it does not support this according to the RFCs, in that it does not
+ take any special action for forwarding messages containing 8-bit
+ characters. That is why accept_8bitmime is not the default setting, but
+ some sites want the action that is provided. We recognize both "8BITMIME"
+ and "7BIT" as body types, but take no action. */
+ case ENV_MAIL_OPT_BODY:
+ if (accept_8bitmime) {
+ if (strcmpic(value, US"8BITMIME") == 0)
+ body_8bitmime = 8;
+ else if (strcmpic(value, US"7BIT") == 0)
+ body_8bitmime = 7;
+ else
+ {
+ body_8bitmime = 0;
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"invalid data for BODY");
+ goto COMMAND_LOOP;
+ }
+ DEBUG(D_receive) debug_printf("8BITMIME: %d\n", body_8bitmime);
+ break;
+ }
+ arg_error = TRUE;
+ break;
- case ENV_MAIL_OPT_RET:
- if (dsn_advertised)
- {
- /* Check if RET has already been set */
- if (dsn_ret > 0)
- {
- synprot_error(L_smtp_syntax_error, 501, NULL,
- US"RET can be specified once only");
- goto COMMAND_LOOP;
- }
- dsn_ret = strcmpic(value, US"HDRS") == 0
- ? dsn_ret_hdrs
- : strcmpic(value, US"FULL") == 0
- ? dsn_ret_full
- : 0;
- DEBUG(D_receive) debug_printf("DSN_RET: %d\n", dsn_ret);
- /* Check for invalid invalid value, and exit with error */
- if (dsn_ret == 0)
+ /* Handle the two DSN options, but only if configured to do so (which
+ will have caused "DSN" to be given in the EHLO response). The code itself
+ is included only if configured in at build time. */
+
+ case ENV_MAIL_OPT_RET:
+ if (fl.dsn_advertised)
{
- synprot_error(L_smtp_syntax_error, 501, NULL,
- US"Value for RET is invalid");
- goto COMMAND_LOOP;
+ /* Check if RET has already been set */
+ if (dsn_ret > 0)
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"RET can be specified once only");
+ goto COMMAND_LOOP;
+ }
+ dsn_ret = strcmpic(value, US"HDRS") == 0
+ ? dsn_ret_hdrs
+ : strcmpic(value, US"FULL") == 0
+ ? dsn_ret_full
+ : 0;
+ DEBUG(D_receive) debug_printf("DSN_RET: %d\n", dsn_ret);
+ /* Check for invalid invalid value, and exit with error */
+ if (dsn_ret == 0)
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"Value for RET is invalid");
+ goto COMMAND_LOOP;
+ }
}
- }
- break;
- case ENV_MAIL_OPT_ENVID:
- if (dsn_advertised)
- {
- /* Check if the dsn envid has been already set */
- if (dsn_envid != NULL)
+ break;
+ case ENV_MAIL_OPT_ENVID:
+ if (fl.dsn_advertised)
{
- synprot_error(L_smtp_syntax_error, 501, NULL,
- US"ENVID can be specified once only");
- goto COMMAND_LOOP;
+ /* Check if the dsn envid has been already set */
+ if (dsn_envid)
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"ENVID can be specified once only");
+ goto COMMAND_LOOP;
+ }
+ dsn_envid = string_copy(value);
+ DEBUG(D_receive) debug_printf("DSN_ENVID: %s\n", dsn_envid);
}
- dsn_envid = string_copy(value);
- DEBUG(D_receive) debug_printf("DSN_ENVID: %s\n", dsn_envid);
- }
- break;
-
- /* Handle the AUTH extension. If the value given is not "<>" and either
- the ACL says "yes" or there is no ACL but the sending host is
- authenticated, we set it up as the authenticated sender. However, if the
- authenticator set a condition to be tested, we ignore AUTH on MAIL unless
- the condition is met. The value of AUTH is an xtext, which means that +,
- = and cntrl chars are coded in hex; however "<>" is unaffected by this
- coding. */
- case ENV_MAIL_OPT_AUTH:
- if (Ustrcmp(value, "<>") != 0)
- {
- int rc;
- uschar *ignore_msg;
+ break;
- if (auth_xtextdecode(value, &authenticated_sender) < 0)
- {
- /* Put back terminator overrides for error message */
- value[-1] = '=';
- name[-1] = ' ';
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"invalid data for AUTH");
- goto COMMAND_LOOP;
- }
- if (acl_smtp_mailauth == NULL)
- {
- ignore_msg = US"client not authenticated";
- rc = (sender_host_authenticated != NULL)? OK : FAIL;
- }
- else
- {
- ignore_msg = US"rejected by ACL";
- rc = acl_check(ACL_WHERE_MAILAUTH, NULL, acl_smtp_mailauth,
- &user_msg, &log_msg);
- }
+ /* Handle the AUTH extension. If the value given is not "<>" and either
+ the ACL says "yes" or there is no ACL but the sending host is
+ authenticated, we set it up as the authenticated sender. However, if the
+ authenticator set a condition to be tested, we ignore AUTH on MAIL unless
+ the condition is met. The value of AUTH is an xtext, which means that +,
+ = and cntrl chars are coded in hex; however "<>" is unaffected by this
+ coding. */
+ case ENV_MAIL_OPT_AUTH:
+ if (Ustrcmp(value, "<>") != 0)
+ {
+ int rc;
+ uschar *ignore_msg;
- switch (rc)
- {
- case OK:
- if (authenticated_by == NULL ||
- authenticated_by->mail_auth_condition == NULL ||
- expand_check_condition(authenticated_by->mail_auth_condition,
- authenticated_by->name, US"authenticator"))
- break; /* Accept the AUTH */
-
- ignore_msg = US"server_mail_auth_condition failed";
- if (authenticated_id != NULL)
- ignore_msg = string_sprintf("%s: authenticated ID=\"%s\"",
- ignore_msg, authenticated_id);
-
- /* Fall through */
-
- case FAIL:
- authenticated_sender = NULL;
- log_write(0, LOG_MAIN, "ignoring AUTH=%s from %s (%s)",
- value, host_and_ident(TRUE), ignore_msg);
- break;
-
- /* Should only get DEFER or ERROR here. Put back terminator
- overrides for error message */
-
- default:
+ if (auth_xtextdecode(value, &authenticated_sender) < 0)
+ {
+ /* Put back terminator overrides for error message */
value[-1] = '=';
name[-1] = ' ';
- (void)smtp_handle_acl_fail(ACL_WHERE_MAILAUTH, rc, user_msg,
- log_msg);
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"invalid data for AUTH");
goto COMMAND_LOOP;
- }
- }
- break;
+ }
+ if (!acl_smtp_mailauth)
+ {
+ ignore_msg = US"client not authenticated";
+ rc = sender_host_authenticated ? OK : FAIL;
+ }
+ else
+ {
+ ignore_msg = US"rejected by ACL";
+ rc = acl_check(ACL_WHERE_MAILAUTH, NULL, acl_smtp_mailauth,
+ &user_msg, &log_msg);
+ }
+
+ switch (rc)
+ {
+ case OK:
+ if (authenticated_by == NULL ||
+ authenticated_by->mail_auth_condition == NULL ||
+ expand_check_condition(authenticated_by->mail_auth_condition,
+ authenticated_by->name, US"authenticator"))
+ break; /* Accept the AUTH */
+
+ ignore_msg = US"server_mail_auth_condition failed";
+ if (authenticated_id != NULL)
+ ignore_msg = string_sprintf("%s: authenticated ID=\"%s\"",
+ ignore_msg, authenticated_id);
+
+ /* Fall through */
+
+ case FAIL:
+ authenticated_sender = NULL;
+ log_write(0, LOG_MAIN, "ignoring AUTH=%s from %s (%s)",
+ value, host_and_ident(TRUE), ignore_msg);
+ break;
+
+ /* Should only get DEFER or ERROR here. Put back terminator
+ overrides for error message */
+
+ default:
+ value[-1] = '=';
+ name[-1] = ' ';
+ (void)smtp_handle_acl_fail(ACL_WHERE_MAILAUTH, rc, user_msg,
+ log_msg);
+ goto COMMAND_LOOP;
+ }
+ }
+ break;
#ifndef DISABLE_PRDR
- case ENV_MAIL_OPT_PRDR:
- if (prdr_enable)
- prdr_requested = TRUE;
- break;
+ case ENV_MAIL_OPT_PRDR:
+ if (prdr_enable)
+ prdr_requested = TRUE;
+ break;
#endif
#ifdef SUPPORT_I18N
- case ENV_MAIL_OPT_UTF8:
- if (smtputf8_advertised)
- {
+ case ENV_MAIL_OPT_UTF8:
+ if (!fl.smtputf8_advertised)
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"SMTPUTF8 used when not advertised");
+ goto COMMAND_LOOP;
+ }
+
DEBUG(D_receive) debug_printf("smtputf8 requested\n");
message_smtputf8 = allow_utf8_domains = TRUE;
- received_protocol = string_sprintf("utf8%s", received_protocol);
- }
- break;
+ if (Ustrncmp(received_protocol, US"utf8", 4) != 0)
+ {
+ int old_pool = store_pool;
+ store_pool = POOL_PERM;
+ received_protocol = string_sprintf("utf8%s", received_protocol);
+ store_pool = old_pool;
+ }
+ break;
#endif
- /* No valid option. Stick back the terminator characters and break
- the loop. Do the name-terminator second as extract_option sets
- value==name when it found no equal-sign.
- An error for a malformed address will occur. */
- case ENV_MAIL_OPT_NULL:
- value[-1] = '=';
- name[-1] = ' ';
- arg_error = TRUE;
- break;
- default: assert(0);
- }
- /* Break out of for loop if switch() had bad argument or
- when start of the email address is reached */
- if (arg_error) break;
- }
+ /* No valid option. Stick back the terminator characters and break
+ the loop. Do the name-terminator second as extract_option sets
+ value==name when it found no equal-sign.
+ An error for a malformed address will occur. */
+ case ENV_MAIL_OPT_NULL:
+ value[-1] = '=';
+ name[-1] = ' ';
+ arg_error = TRUE;
+ break;
- /* If we have passed the threshold for rate limiting, apply the current
- delay, and update it for next time, provided this is a limited host. */
+ default: assert(0);
+ }
+ /* Break out of for loop if switch() had bad argument or
+ when start of the email address is reached */
+ if (arg_error) break;
+ }
- if (smtp_mailcmd_count > smtp_rlm_threshold &&
- verify_check_host(&smtp_ratelimit_hosts) == OK)
- {
- DEBUG(D_receive) debug_printf("rate limit MAIL: delay %.3g sec\n",
- smtp_delay_mail/1000.0);
- millisleep((int)smtp_delay_mail);
- smtp_delay_mail *= smtp_rlm_factor;
- if (smtp_delay_mail > (double)smtp_rlm_limit)
- smtp_delay_mail = (double)smtp_rlm_limit;
- }
+ /* If we have passed the threshold for rate limiting, apply the current
+ delay, and update it for next time, provided this is a limited host. */
- /* Now extract the address, first applying any SMTP-time rewriting. The
- TRUE flag allows "<>" as a sender address. */
+ if (smtp_mailcmd_count > smtp_rlm_threshold &&
+ verify_check_host(&smtp_ratelimit_hosts) == OK)
+ {
+ DEBUG(D_receive) debug_printf("rate limit MAIL: delay %.3g sec\n",
+ smtp_delay_mail/1000.0);
+ millisleep((int)smtp_delay_mail);
+ smtp_delay_mail *= smtp_rlm_factor;
+ if (smtp_delay_mail > (double)smtp_rlm_limit)
+ smtp_delay_mail = (double)smtp_rlm_limit;
+ }
- raw_sender = rewrite_existflags & rewrite_smtp
- ? rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
- global_rewrite_rules)
- : smtp_cmd_data;
+ /* Now extract the address, first applying any SMTP-time rewriting. The
+ TRUE flag allows "<>" as a sender address. */
- raw_sender =
- parse_extract_address(raw_sender, &errmess, &start, &end, &sender_domain,
- TRUE);
+ raw_sender = rewrite_existflags & rewrite_smtp
+ /* deconst ok as smtp_cmd_data was not const */
+ ? US rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
+ global_rewrite_rules)
+ : smtp_cmd_data;
- if (!raw_sender)
- {
- done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_data, errmess);
- break;
- }
+ raw_sender =
+ parse_extract_address(raw_sender, &errmess, &start, &end, &sender_domain,
+ TRUE);
- sender_address = raw_sender;
+ if (!raw_sender)
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_data, errmess);
+ break;
+ }
- /* If there is a configured size limit for mail, check that this message
- doesn't exceed it. The check is postponed to this point so that the sender
- can be logged. */
+ sender_address = raw_sender;
- if (thismessage_size_limit > 0 && message_size > thismessage_size_limit)
- {
- smtp_printf("552 Message size exceeds maximum permitted\r\n");
- log_write(L_size_reject,
- LOG_MAIN|LOG_REJECT, "rejected MAIL FROM:<%s> %s: "
- "message too big: size%s=%d max=%d",
- sender_address,
- host_and_ident(TRUE),
- (message_size == INT_MAX)? ">" : "",
- message_size,
- thismessage_size_limit);
- sender_address = NULL;
- break;
- }
+ /* If there is a configured size limit for mail, check that this message
+ doesn't exceed it. The check is postponed to this point so that the sender
+ can be logged. */
- /* Check there is enough space on the disk unless configured not to.
- When smtp_check_spool_space is set, the check is for thismessage_size_limit
- plus the current message - i.e. we accept the message only if it won't
- reduce the space below the threshold. Add 5000 to the size to allow for
- overheads such as the Received: line and storing of recipients, etc.
- By putting the check here, even when SIZE is not given, it allow VRFY
- and EXPN etc. to be used when space is short. */
-
- if (!receive_check_fs(
- (smtp_check_spool_space && message_size >= 0)?
- message_size + 5000 : 0))
- {
- smtp_printf("452 Space shortage, please try later\r\n");
- sender_address = NULL;
- break;
- }
+ if (thismessage_size_limit > 0 && message_size > thismessage_size_limit)
+ {
+ smtp_printf("552 Message size exceeds maximum permitted\r\n", FALSE);
+ log_write(L_size_reject,
+ LOG_MAIN|LOG_REJECT, "rejected MAIL FROM:<%s> %s: "
+ "message too big: size%s=%d max=%d",
+ sender_address,
+ host_and_ident(TRUE),
+ (message_size == INT_MAX)? ">" : "",
+ message_size,
+ thismessage_size_limit);
+ sender_address = NULL;
+ break;
+ }
- /* If sender_address is unqualified, reject it, unless this is a locally
- generated message, or the sending host or net is permitted to send
- unqualified addresses - typically local machines behaving as MUAs -
- in which case just qualify the address. The flag is set above at the start
- of the SMTP connection. */
+ /* Check there is enough space on the disk unless configured not to.
+ When smtp_check_spool_space is set, the check is for thismessage_size_limit
+ plus the current message - i.e. we accept the message only if it won't
+ reduce the space below the threshold. Add 5000 to the size to allow for
+ overheads such as the Received: line and storing of recipients, etc.
+ By putting the check here, even when SIZE is not given, it allow VRFY
+ and EXPN etc. to be used when space is short. */
+
+ if (!receive_check_fs(
+ smtp_check_spool_space && message_size >= 0
+ ? message_size + 5000 : 0))
+ {
+ smtp_printf("452 Space shortage, please try later\r\n", FALSE);
+ sender_address = NULL;
+ break;
+ }
- if (sender_domain == 0 && sender_address[0] != 0)
- {
- if (allow_unqualified_sender)
- {
- sender_domain = Ustrlen(sender_address) + 1;
- sender_address = rewrite_address_qualify(sender_address, FALSE);
- DEBUG(D_receive) debug_printf("unqualified address %s accepted\n",
- raw_sender);
- }
- else
- {
- smtp_printf("501 %s: sender address must contain a domain\r\n",
- smtp_cmd_data);
- log_write(L_smtp_syntax_error,
- LOG_MAIN|LOG_REJECT,
- "unqualified sender rejected: <%s> %s%s",
- raw_sender,
- host_and_ident(TRUE),
- host_lookup_msg);
- sender_address = NULL;
- break;
- }
- }
+ /* If sender_address is unqualified, reject it, unless this is a locally
+ generated message, or the sending host or net is permitted to send
+ unqualified addresses - typically local machines behaving as MUAs -
+ in which case just qualify the address. The flag is set above at the start
+ of the SMTP connection. */
+
+ if (!sender_domain && *sender_address)
+ if (f.allow_unqualified_sender)
+ {
+ sender_domain = Ustrlen(sender_address) + 1;
+ /* deconst ok as sender_address was not const */
+ sender_address = US rewrite_address_qualify(sender_address, FALSE);
+ DEBUG(D_receive) debug_printf("unqualified address %s accepted\n",
+ raw_sender);
+ }
+ else
+ {
+ smtp_printf("501 %s: sender address must contain a domain\r\n", FALSE,
+ smtp_cmd_data);
+ log_write(L_smtp_syntax_error,
+ LOG_MAIN|LOG_REJECT,
+ "unqualified sender rejected: <%s> %s%s",
+ raw_sender,
+ host_and_ident(TRUE),
+ host_lookup_msg);
+ sender_address = NULL;
+ break;
+ }
- /* Apply an ACL check if one is defined, before responding. Afterwards,
- when pipelining is not advertised, do another sync check in case the ACL
- delayed and the client started sending in the meantime. */
+ /* Apply an ACL check if one is defined, before responding. Afterwards,
+ when pipelining is not advertised, do another sync check in case the ACL
+ delayed and the client started sending in the meantime. */
- if (acl_smtp_mail)
- {
- rc = acl_check(ACL_WHERE_MAIL, NULL, acl_smtp_mail, &user_msg, &log_msg);
- if (rc == OK && !pipelining_advertised && !check_sync())
- goto SYNC_FAILURE;
- }
- else
- rc = OK;
+ if (acl_smtp_mail)
+ {
+ rc = acl_check(ACL_WHERE_MAIL, NULL, acl_smtp_mail, &user_msg, &log_msg);
+ if (rc == OK && !f.smtp_in_pipelining_advertised && !check_sync())
+ goto SYNC_FAILURE;
+ }
+ else
+ rc = OK;
- if (rc == OK || rc == DISCARD)
- {
- if (!user_msg)
- smtp_printf("%s%s%s", US"250 OK",
- #ifndef DISABLE_PRDR
- prdr_requested ? US", PRDR Requested" : US"",
- #else
- US"",
- #endif
- US"\r\n");
+ if (rc == OK || rc == DISCARD)
+ {
+ BOOL more = pipeline_response();
+
+ if (!user_msg)
+ smtp_printf("%s%s%s", more, US"250 OK",
+ #ifndef DISABLE_PRDR
+ prdr_requested ? US", PRDR Requested" : US"",
+ #else
+ US"",
+ #endif
+ US"\r\n");
+ else
+ {
+ #ifndef DISABLE_PRDR
+ if (prdr_requested)
+ user_msg = string_sprintf("%s%s", user_msg, US", PRDR Requested");
+ #endif
+ smtp_user_msg(US"250", user_msg);
+ }
+ smtp_delay_rcpt = smtp_rlr_base;
+ f.recipients_discarded = (rc == DISCARD);
+ was_rej_mail = FALSE;
+ }
else
- {
- #ifndef DISABLE_PRDR
- if (prdr_requested)
- user_msg = string_sprintf("%s%s", user_msg, US", PRDR Requested");
- #endif
- smtp_user_msg(US"250", user_msg);
- }
- smtp_delay_rcpt = smtp_rlr_base;
- recipients_discarded = (rc == DISCARD);
- was_rej_mail = FALSE;
- }
- else
- {
- done = smtp_handle_acl_fail(ACL_WHERE_MAIL, rc, user_msg, log_msg);
- sender_address = NULL;
- }
- break;
+ {
+ done = smtp_handle_acl_fail(ACL_WHERE_MAIL, rc, user_msg, log_msg);
+ sender_address = NULL;
+ }
+ break;
/* The RCPT command requires an address as an operand. There may be any
are not used, as we keep only the extracted address. */
case RCPT_CMD:
- HAD(SCH_RCPT);
- rcpt_count++;
- was_rcpt = rcpt_in_progress = TRUE;
-
- /* There must be a sender address; if the sender was rejected and
- pipelining was advertised, we assume the client was pipelining, and do not
- count this as a protocol error. Reset was_rej_mail so that further RCPTs
- get the same treatment. */
-
- if (sender_address == NULL)
- {
- if (pipelining_advertised && last_was_rej_mail)
- {
- smtp_printf("503 sender not yet given\r\n");
- was_rej_mail = TRUE;
- }
- else
- {
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"sender not yet given");
- was_rcpt = FALSE; /* Not a valid RCPT */
- }
- rcpt_fail_count++;
- break;
- }
+ HAD(SCH_RCPT);
+ /* We got really to many recipients. A check against configured
+ limits is done later */
+ if (rcpt_count < 0 || rcpt_count >= INT_MAX/2)
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Too many recipients: %d", rcpt_count);
+ rcpt_count++;
+ was_rcpt = fl.rcpt_in_progress = TRUE;
+
+ /* There must be a sender address; if the sender was rejected and
+ pipelining was advertised, we assume the client was pipelining, and do not
+ count this as a protocol error. Reset was_rej_mail so that further RCPTs
+ get the same treatment. */
+
+ if (!sender_address)
+ {
+ if (f.smtp_in_pipelining_advertised && last_was_rej_mail)
+ {
+ smtp_printf("503 sender not yet given\r\n", FALSE);
+ was_rej_mail = TRUE;
+ }
+ else
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"sender not yet given");
+ was_rcpt = FALSE; /* Not a valid RCPT */
+ }
+ rcpt_fail_count++;
+ break;
+ }
- /* Check for an operand */
+ /* Check for an operand */
- if (smtp_cmd_data[0] == 0)
- {
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"RCPT must have an address operand");
- rcpt_fail_count++;
- break;
- }
+ if (!smtp_cmd_data[0])
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"RCPT must have an address operand");
+ rcpt_fail_count++;
+ break;
+ }
- /* Set the DSN flags orcpt and dsn_flags from the session*/
- orcpt = NULL;
- flags = 0;
+ /* Set the DSN flags orcpt and dsn_flags from the session*/
+ orcpt = NULL;
+ dsn_flags = 0;
- if (esmtp) for(;;)
- {
- uschar *name, *value;
+ if (fl.esmtp) for(;;)
+ {
+ uschar *name, *value;
- if (!extract_option(&name, &value))
- break;
+ if (!extract_option(&name, &value))
+ break;
- if (dsn_advertised && strcmpic(name, US"ORCPT") == 0)
- {
- /* Check whether orcpt has been already set */
- if (orcpt)
+ if (fl.dsn_advertised && strcmpic(name, US"ORCPT") == 0)
{
- synprot_error(L_smtp_syntax_error, 501, NULL,
- US"ORCPT can be specified once only");
- goto COMMAND_LOOP;
- }
- orcpt = string_copy(value);
- DEBUG(D_receive) debug_printf("DSN orcpt: %s\n", orcpt);
- }
+ /* Check whether orcpt has been already set */
+ if (orcpt)
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"ORCPT can be specified once only");
+ goto COMMAND_LOOP;
+ }
+ orcpt = string_copy(value);
+ DEBUG(D_receive) debug_printf("DSN orcpt: %s\n", orcpt);
+ }
- else if (dsn_advertised && strcmpic(name, US"NOTIFY") == 0)
- {
- /* Check if the notify flags have been already set */
- if (flags > 0)
+ else if (fl.dsn_advertised && strcmpic(name, US"NOTIFY") == 0)
{
- synprot_error(L_smtp_syntax_error, 501, NULL,
- US"NOTIFY can be specified once only");
- goto COMMAND_LOOP;
- }
- if (strcmpic(value, US"NEVER") == 0)
- flags |= rf_notify_never;
- else
- {
- uschar *p = value;
- while (*p != 0)
- {
- uschar *pp = p;
- while (*pp != 0 && *pp != ',') pp++;
- if (*pp == ',') *pp++ = 0;
- if (strcmpic(p, US"SUCCESS") == 0)
- {
- DEBUG(D_receive) debug_printf("DSN: Setting notify success\n");
- flags |= rf_notify_success;
- }
- else if (strcmpic(p, US"FAILURE") == 0)
- {
- DEBUG(D_receive) debug_printf("DSN: Setting notify failure\n");
- flags |= rf_notify_failure;
- }
- else if (strcmpic(p, US"DELAY") == 0)
- {
- DEBUG(D_receive) debug_printf("DSN: Setting notify delay\n");
- flags |= rf_notify_delay;
- }
- else
+ /* Check if the notify flags have been already set */
+ if (dsn_flags > 0)
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"NOTIFY can be specified once only");
+ goto COMMAND_LOOP;
+ }
+ if (strcmpic(value, US"NEVER") == 0)
+ dsn_flags |= rf_notify_never;
+ else
+ {
+ uschar *p = value;
+ while (*p != 0)
{
- /* Catch any strange values */
- synprot_error(L_smtp_syntax_error, 501, NULL,
- US"Invalid value for NOTIFY parameter");
- goto COMMAND_LOOP;
- }
- p = pp;
- }
- DEBUG(D_receive) debug_printf("DSN Flags: %x\n", flags);
- }
- }
+ uschar *pp = p;
+ while (*pp != 0 && *pp != ',') pp++;
+ if (*pp == ',') *pp++ = 0;
+ if (strcmpic(p, US"SUCCESS") == 0)
+ {
+ DEBUG(D_receive) debug_printf("DSN: Setting notify success\n");
+ dsn_flags |= rf_notify_success;
+ }
+ else if (strcmpic(p, US"FAILURE") == 0)
+ {
+ DEBUG(D_receive) debug_printf("DSN: Setting notify failure\n");
+ dsn_flags |= rf_notify_failure;
+ }
+ else if (strcmpic(p, US"DELAY") == 0)
+ {
+ DEBUG(D_receive) debug_printf("DSN: Setting notify delay\n");
+ dsn_flags |= rf_notify_delay;
+ }
+ else
+ {
+ /* Catch any strange values */
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"Invalid value for NOTIFY parameter");
+ goto COMMAND_LOOP;
+ }
+ p = pp;
+ }
+ DEBUG(D_receive) debug_printf("DSN Flags: %x\n", dsn_flags);
+ }
+ }
- /* Unknown option. Stick back the terminator characters and break
- the loop. An error for a malformed address will occur. */
+ /* Unknown option. Stick back the terminator characters and break
+ the loop. An error for a malformed address will occur. */
- else
- {
- DEBUG(D_receive) debug_printf("Invalid RCPT option: %s : %s\n", name, value);
- name[-1] = ' ';
- value[-1] = '=';
- break;
- }
- }
+ else
+ {
+ DEBUG(D_receive) debug_printf("Invalid RCPT option: %s : %s\n", name, value);
+ name[-1] = ' ';
+ value[-1] = '=';
+ break;
+ }
+ }
- /* Apply SMTP rewriting then extract the working address. Don't allow "<>"
- as a recipient address */
+ /* Apply SMTP rewriting then extract the working address. Don't allow "<>"
+ as a recipient address */
- recipient = rewrite_existflags & rewrite_smtp
- ? rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
- global_rewrite_rules)
- : smtp_cmd_data;
+ recipient = rewrite_existflags & rewrite_smtp
+ /* deconst ok as smtp_cmd_data was not const */
+ ? US rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
+ global_rewrite_rules)
+ : smtp_cmd_data;
- if (!(recipient = parse_extract_address(recipient, &errmess, &start, &end,
- &recipient_domain, FALSE)))
- {
- done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_data, errmess);
- rcpt_fail_count++;
- break;
- }
+ if (!(recipient = parse_extract_address(recipient, &errmess, &start, &end,
+ &recipient_domain, FALSE)))
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, smtp_cmd_data, errmess);
+ rcpt_fail_count++;
+ break;
+ }
- /* If the recipient address is unqualified, reject it, unless this is a
- locally generated message. However, unqualified addresses are permitted
- from a configured list of hosts and nets - typically when behaving as
- MUAs rather than MTAs. Sad that SMTP is used for both types of traffic,
- really. The flag is set at the start of the SMTP connection.
+ /* If the recipient address is unqualified, reject it, unless this is a
+ locally generated message. However, unqualified addresses are permitted
+ from a configured list of hosts and nets - typically when behaving as
+ MUAs rather than MTAs. Sad that SMTP is used for both types of traffic,
+ really. The flag is set at the start of the SMTP connection.
- RFC 1123 talks about supporting "the reserved mailbox postmaster"; I always
- assumed this meant "reserved local part", but the revision of RFC 821 and
- friends now makes it absolutely clear that it means *mailbox*. Consequently
- we must always qualify this address, regardless. */
+ RFC 1123 talks about supporting "the reserved mailbox postmaster"; I always
+ assumed this meant "reserved local part", but the revision of RFC 821 and
+ friends now makes it absolutely clear that it means *mailbox*. Consequently
+ we must always qualify this address, regardless. */
- if (!recipient_domain)
- if (!(recipient_domain = qualify_recipient(&recipient, smtp_cmd_data,
- US"recipient")))
- {
- rcpt_fail_count++;
- break;
- }
+ if (!recipient_domain)
+ if (!(recipient_domain = qualify_recipient(&recipient, smtp_cmd_data,
+ US"recipient")))
+ {
+ rcpt_fail_count++;
+ break;
+ }
- /* Check maximum allowed */
+ /* Check maximum allowed */
- if (rcpt_count > recipients_max && recipients_max > 0)
- {
- if (recipients_max_reject)
- {
- rcpt_fail_count++;
- smtp_printf("552 too many recipients\r\n");
- if (!toomany)
- log_write(0, LOG_MAIN|LOG_REJECT, "too many recipients: message "
- "rejected: sender=<%s> %s", sender_address, host_and_ident(TRUE));
- }
- else
- {
- rcpt_defer_count++;
- smtp_printf("452 too many recipients\r\n");
- if (!toomany)
- log_write(0, LOG_MAIN|LOG_REJECT, "too many recipients: excess "
- "temporarily rejected: sender=<%s> %s", sender_address,
- host_and_ident(TRUE));
- }
+ if (rcpt_count+1 < 0 || rcpt_count > recipients_max && recipients_max > 0)
+ {
+ if (recipients_max_reject)
+ {
+ rcpt_fail_count++;
+ smtp_printf("552 too many recipients\r\n", FALSE);
+ if (!toomany)
+ log_write(0, LOG_MAIN|LOG_REJECT, "too many recipients: message "
+ "rejected: sender=<%s> %s", sender_address, host_and_ident(TRUE));
+ }
+ else
+ {
+ rcpt_defer_count++;
+ smtp_printf("452 too many recipients\r\n", FALSE);
+ if (!toomany)
+ log_write(0, LOG_MAIN|LOG_REJECT, "too many recipients: excess "
+ "temporarily rejected: sender=<%s> %s", sender_address,
+ host_and_ident(TRUE));
+ }
- toomany = TRUE;
- break;
- }
+ toomany = TRUE;
+ break;
+ }
- /* If we have passed the threshold for rate limiting, apply the current
- delay, and update it for next time, provided this is a limited host. */
+ /* If we have passed the threshold for rate limiting, apply the current
+ delay, and update it for next time, provided this is a limited host. */
- if (rcpt_count > smtp_rlr_threshold &&
- verify_check_host(&smtp_ratelimit_hosts) == OK)
- {
- DEBUG(D_receive) debug_printf("rate limit RCPT: delay %.3g sec\n",
- smtp_delay_rcpt/1000.0);
- millisleep((int)smtp_delay_rcpt);
- smtp_delay_rcpt *= smtp_rlr_factor;
- if (smtp_delay_rcpt > (double)smtp_rlr_limit)
- smtp_delay_rcpt = (double)smtp_rlr_limit;
- }
+ if (rcpt_count > smtp_rlr_threshold &&
+ verify_check_host(&smtp_ratelimit_hosts) == OK)
+ {
+ DEBUG(D_receive) debug_printf("rate limit RCPT: delay %.3g sec\n",
+ smtp_delay_rcpt/1000.0);
+ millisleep((int)smtp_delay_rcpt);
+ smtp_delay_rcpt *= smtp_rlr_factor;
+ if (smtp_delay_rcpt > (double)smtp_rlr_limit)
+ smtp_delay_rcpt = (double)smtp_rlr_limit;
+ }
- /* If the MAIL ACL discarded all the recipients, we bypass ACL checking
- for them. Otherwise, check the access control list for this recipient. As
- there may be a delay in this, re-check for a synchronization error
- afterwards, unless pipelining was advertised. */
+ /* If the MAIL ACL discarded all the recipients, we bypass ACL checking
+ for them. Otherwise, check the access control list for this recipient. As
+ there may be a delay in this, re-check for a synchronization error
+ afterwards, unless pipelining was advertised. */
- if (recipients_discarded)
- rc = DISCARD;
- else
- if ( (rc = acl_check(ACL_WHERE_RCPT, recipient, acl_smtp_rcpt, &user_msg,
- &log_msg)) == OK
- && !pipelining_advertised && !check_sync())
- goto SYNC_FAILURE;
+ if (f.recipients_discarded)
+ rc = DISCARD;
+ else
+ if ( (rc = acl_check(ACL_WHERE_RCPT, recipient, acl_smtp_rcpt, &user_msg,
+ &log_msg)) == OK
+ && !f.smtp_in_pipelining_advertised && !check_sync())
+ goto SYNC_FAILURE;
- /* The ACL was happy */
+ /* The ACL was happy */
- if (rc == OK)
- {
- if (user_msg)
- smtp_user_msg(US"250", user_msg);
- else
- smtp_printf("250 Accepted\r\n");
- receive_add_recipient(recipient, -1);
+ if (rc == OK)
+ {
+ BOOL more = pipeline_response();
- /* Set the dsn flags in the recipients_list */
- recipients_list[recipients_count-1].orcpt = orcpt;
- recipients_list[recipients_count-1].dsn_flags = flags;
+ if (user_msg)
+ smtp_user_msg(US"250", user_msg);
+ else
+ smtp_printf("250 Accepted\r\n", more);
+ receive_add_recipient(recipient, -1);
- DEBUG(D_receive) debug_printf("DSN: orcpt: %s flags: %d\n",
- recipients_list[recipients_count-1].orcpt,
- recipients_list[recipients_count-1].dsn_flags);
- }
+ /* Set the dsn flags in the recipients_list */
+ recipients_list[recipients_count-1].orcpt = orcpt;
+ recipients_list[recipients_count-1].dsn_flags = dsn_flags;
+
+ /* DEBUG(D_receive) debug_printf("DSN: orcpt: %s flags: %d\n",
+ recipients_list[recipients_count-1].orcpt,
+ recipients_list[recipients_count-1].dsn_flags); */
+ }
+
+ /* The recipient was discarded */
+
+ else if (rc == DISCARD)
+ {
+ if (user_msg)
+ smtp_user_msg(US"250", user_msg);
+ else
+ smtp_printf("250 Accepted\r\n", FALSE);
+ rcpt_fail_count++;
+ discarded = TRUE;
+ log_write(0, LOG_MAIN|LOG_REJECT, "%s F=<%s> RCPT %s: "
+ "discarded by %s ACL%s%s", host_and_ident(TRUE),
+ sender_address_unrewritten ? sender_address_unrewritten : sender_address,
+ smtp_cmd_argument, f.recipients_discarded ? "MAIL" : "RCPT",
+ log_msg ? US": " : US"", log_msg ? log_msg : US"");
+ }
- /* The recipient was discarded */
+ /* Either the ACL failed the address, or it was deferred. */
- else if (rc == DISCARD)
- {
- if (user_msg)
- smtp_user_msg(US"250", user_msg);
else
- smtp_printf("250 Accepted\r\n");
- rcpt_fail_count++;
- discarded = TRUE;
- log_write(0, LOG_MAIN|LOG_REJECT, "%s F=<%s> RCPT %s: "
- "discarded by %s ACL%s%s", host_and_ident(TRUE),
- sender_address_unrewritten? sender_address_unrewritten : sender_address,
- smtp_cmd_argument, recipients_discarded? "MAIL" : "RCPT",
- log_msg ? US": " : US"", log_msg ? log_msg : US"");
- }
-
- /* Either the ACL failed the address, or it was deferred. */
-
- else
- {
- if (rc == FAIL) rcpt_fail_count++; else rcpt_defer_count++;
- done = smtp_handle_acl_fail(ACL_WHERE_RCPT, rc, user_msg, log_msg);
- }
- break;
+ {
+ if (rc == FAIL) rcpt_fail_count++; else rcpt_defer_count++;
+ done = smtp_handle_acl_fail(ACL_WHERE_RCPT, rc, user_msg, log_msg);
+ }
+ break;
/* The DATA command is legal only if it follows successful MAIL FROM
with the DATA rejection (an idea suggested by Tony Finch). */
case BDAT_CMD:
- HAD(SCH_BDAT);
{
int n;
+ HAD(SCH_BDAT);
if (chunking_state != CHUNKING_OFFERED)
{
done = synprot_error(L_smtp_protocol_error, 503, NULL,
chunking_state = strcmpic(smtp_cmd_data+n, US"LAST") == 0
? CHUNKING_LAST : CHUNKING_ACTIVE;
chunking_data_left = chunking_datasize;
+ DEBUG(D_receive) debug_printf("chunking state %d, %d bytes\n",
+ (int)chunking_state, chunking_data_left);
- lwr_receive_getc = receive_getc;
- lwr_receive_ungetc = receive_ungetc;
- receive_getc = bdat_getc;
- receive_ungetc = bdat_ungetc;
+ f.bdat_readers_wanted = TRUE; /* FIXME: redundant vs chunking_state? */
+ f.dot_ends = FALSE;
- DEBUG(D_any)
- debug_printf("chunking state %d\n", (int)chunking_state);
goto DATA_BDAT;
}
case DATA_CMD:
- HAD(SCH_DATA);
+ HAD(SCH_DATA);
+ f.dot_ends = TRUE;
+ f.bdat_readers_wanted = FALSE;
DATA_BDAT: /* Common code for DATA and BDAT */
- if (!discarded && recipients_count <= 0)
- {
- if (rcpt_smtp_response_same && rcpt_smtp_response != NULL)
- {
- uschar *code = US"503";
- int len = Ustrlen(rcpt_smtp_response);
- smtp_respond(code, 3, FALSE, US"All RCPT commands were rejected with "
- "this error:");
- /* Responses from smtp_printf() will have \r\n on the end */
- if (len > 2 && rcpt_smtp_response[len-2] == '\r')
- rcpt_smtp_response[len-2] = 0;
- smtp_respond(code, 3, FALSE, rcpt_smtp_response);
- }
- if (pipelining_advertised && last_was_rcpt)
- smtp_printf("503 Valid RCPT command must precede %s\r\n",
- smtp_names[smtp_connection_had[smtp_ch_index-1]]);
- else
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- smtp_connection_had[smtp_ch_index-1] == SCH_DATA
- ? US"valid RCPT command must precede DATA"
- : US"valid RCPT command must precede BDAT");
+#ifndef DISABLE_PIPE_CONNECT
+ fl.pipe_connect_acceptable = FALSE;
+#endif
+ if (!discarded && recipients_count <= 0)
+ {
+ if (fl.rcpt_smtp_response_same && rcpt_smtp_response)
+ {
+ uschar *code = US"503";
+ int len = Ustrlen(rcpt_smtp_response);
+ smtp_respond(code, 3, FALSE, US"All RCPT commands were rejected with "
+ "this error:");
+ /* Responses from smtp_printf() will have \r\n on the end */
+ if (len > 2 && rcpt_smtp_response[len-2] == '\r')
+ rcpt_smtp_response[len-2] = 0;
+ smtp_respond(code, 3, FALSE, rcpt_smtp_response);
+ }
+ if (f.smtp_in_pipelining_advertised && last_was_rcpt)
+ smtp_printf("503 Valid RCPT command must precede %s\r\n", FALSE,
+ smtp_names[smtp_connection_had[SMTP_HBUFF_PREV(smtp_ch_index)]]);
+ else
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ smtp_connection_had[SMTP_HBUFF_PREV(smtp_ch_index)] == SCH_DATA
+ ? US"valid RCPT command must precede DATA"
+ : US"valid RCPT command must precede BDAT");
- if (chunking_state > CHUNKING_OFFERED)
- bdat_flush_data();
- break;
- }
+ if (chunking_state > CHUNKING_OFFERED)
+ {
+ bdat_push_receive_functions();
+ bdat_flush_data();
+ }
+ break;
+ }
- if (toomany && recipients_max_reject)
- {
- sender_address = NULL; /* This will allow a new MAIL without RSET */
- sender_address_unrewritten = NULL;
- smtp_printf("554 Too many recipients\r\n");
- break;
- }
+ if (toomany && recipients_max_reject)
+ {
+ sender_address = NULL; /* This will allow a new MAIL without RSET */
+ sender_address_unrewritten = NULL;
+ smtp_printf("554 Too many recipients\r\n", FALSE);
- if (chunking_state > CHUNKING_OFFERED)
- rc = OK; /* No predata ACL or go-ahead output for BDAT */
- else
- {
- /* If there is an ACL, re-check the synchronization afterwards, since the
- ACL may have delayed. To handle cutthrough delivery enforce a dummy call
- to get the DATA command sent. */
+ if (chunking_state > CHUNKING_OFFERED)
+ {
+ bdat_push_receive_functions();
+ bdat_flush_data();
+ }
+ break;
+ }
- if (acl_smtp_predata == NULL && cutthrough.fd < 0)
- rc = OK;
+ if (chunking_state > CHUNKING_OFFERED)
+ rc = OK; /* No predata ACL or go-ahead output for BDAT */
else
{
- uschar * acl = acl_smtp_predata ? acl_smtp_predata : US"accept";
- enable_dollar_recipients = TRUE;
- rc = acl_check(ACL_WHERE_PREDATA, NULL, acl, &user_msg,
- &log_msg);
- enable_dollar_recipients = FALSE;
- if (rc == OK && !check_sync())
- goto SYNC_FAILURE;
+ /* If there is an ACL, re-check the synchronization afterwards, since the
+ ACL may have delayed. To handle cutthrough delivery enforce a dummy call
+ to get the DATA command sent. */
- if (rc != OK)
- { /* Either the ACL failed the address, or it was deferred. */
- done = smtp_handle_acl_fail(ACL_WHERE_PREDATA, rc, user_msg, log_msg);
- break;
+ if (!acl_smtp_predata && cutthrough.cctx.sock < 0)
+ rc = OK;
+ else
+ {
+ uschar * acl = acl_smtp_predata ? acl_smtp_predata : US"accept";
+ f.enable_dollar_recipients = TRUE;
+ rc = acl_check(ACL_WHERE_PREDATA, NULL, acl, &user_msg,
+ &log_msg);
+ f.enable_dollar_recipients = FALSE;
+ if (rc == OK && !check_sync())
+ goto SYNC_FAILURE;
+
+ if (rc != OK)
+ { /* Either the ACL failed the address, or it was deferred. */
+ done = smtp_handle_acl_fail(ACL_WHERE_PREDATA, rc, user_msg, log_msg);
+ break;
+ }
}
+
+ if (user_msg)
+ smtp_user_msg(US"354", user_msg);
+ else
+ smtp_printf(
+ "354 Enter message, ending with \".\" on a line by itself\r\n", FALSE);
}
- if (user_msg)
- smtp_user_msg(US"354", user_msg);
- else
- smtp_printf(
- "354 Enter message, ending with \".\" on a line by itself\r\n");
- }
+ if (f.bdat_readers_wanted)
+ bdat_push_receive_functions();
#ifdef TCP_QUICKACK
- if (smtp_in) /* all ACKs needed to ramp window up for bulk data */
- (void) setsockopt(fileno(smtp_in), IPPROTO_TCP, TCP_QUICKACK,
- US &on, sizeof(on));
+ if (smtp_in) /* all ACKs needed to ramp window up for bulk data */
+ (void) setsockopt(fileno(smtp_in), IPPROTO_TCP, TCP_QUICKACK,
+ US &on, sizeof(on));
#endif
- done = 3;
- message_ended = END_NOTENDED; /* Indicate in middle of data */
+ done = 3;
+ message_ended = END_NOTENDED; /* Indicate in middle of data */
- break;
+ break;
case VRFY_CMD:
if (!(address = parse_extract_address(smtp_cmd_data, &errmess,
&start, &end, &recipient_domain, FALSE)))
{
- smtp_printf("501 %s\r\n", errmess);
+ smtp_printf("501 %s\r\n", FALSE, errmess);
break;
}
break;
}
- smtp_printf("%s\r\n", s);
+ smtp_printf("%s\r\n", FALSE, s);
}
break;
}
case EXPN_CMD:
- HAD(SCH_EXPN);
- rc = acl_check(ACL_WHERE_EXPN, NULL, acl_smtp_expn, &user_msg, &log_msg);
- if (rc != OK)
- done = smtp_handle_acl_fail(ACL_WHERE_EXPN, rc, user_msg, log_msg);
- else
- {
- BOOL save_log_testing_mode = log_testing_mode;
- address_test_mode = log_testing_mode = TRUE;
- (void) verify_address(deliver_make_addr(smtp_cmd_data, FALSE),
- smtp_out, vopt_is_recipient | vopt_qualify | vopt_expn, -1, -1, -1,
- NULL, NULL, NULL);
- address_test_mode = FALSE;
- log_testing_mode = save_log_testing_mode; /* true for -bh */
- }
- break;
+ HAD(SCH_EXPN);
+ rc = acl_check(ACL_WHERE_EXPN, NULL, acl_smtp_expn, &user_msg, &log_msg);
+ if (rc != OK)
+ done = smtp_handle_acl_fail(ACL_WHERE_EXPN, rc, user_msg, log_msg);
+ else
+ {
+ BOOL save_log_testing_mode = f.log_testing_mode;
+ f.address_test_mode = f.log_testing_mode = TRUE;
+ (void) verify_address(deliver_make_addr(smtp_cmd_data, FALSE),
+ smtp_out, vopt_is_recipient | vopt_qualify | vopt_expn, -1, -1, -1,
+ NULL, NULL, NULL);
+ f.address_test_mode = FALSE;
+ f.log_testing_mode = save_log_testing_mode; /* true for -bh */
+ }
+ break;
- #ifdef SUPPORT_TLS
+ #ifndef DISABLE_TLS
case STARTTLS_CMD:
- HAD(SCH_STARTTLS);
- if (!tls_advertised)
- {
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"STARTTLS command used when not advertised");
- break;
- }
-
- /* Apply an ACL check if one is defined */
+ HAD(SCH_STARTTLS);
+ if (!fl.tls_advertised)
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"STARTTLS command used when not advertised");
+ break;
+ }
- if ( acl_smtp_starttls
- && (rc = acl_check(ACL_WHERE_STARTTLS, NULL, acl_smtp_starttls,
- &user_msg, &log_msg)) != OK
- )
- {
- done = smtp_handle_acl_fail(ACL_WHERE_STARTTLS, rc, user_msg, log_msg);
- break;
- }
+ /* Apply an ACL check if one is defined */
- /* RFC 2487 is not clear on when this command may be sent, though it
- does state that all information previously obtained from the client
- must be discarded if a TLS session is started. It seems reasonable to
- do an implied RSET when STARTTLS is received. */
-
- incomplete_transaction_log(US"STARTTLS");
- smtp_reset(reset_point);
- toomany = FALSE;
- cmd_list[CMD_LIST_STARTTLS].is_mail_cmd = FALSE;
-
- /* There's an attack where more data is read in past the STARTTLS command
- before TLS is negotiated, then assumed to be part of the secure session
- when used afterwards; we use segregated input buffers, so are not
- vulnerable, but we want to note when it happens and, for sheer paranoia,
- ensure that the buffer is "wiped".
- Pipelining sync checks will normally have protected us too, unless disabled
- by configuration. */
-
- if (receive_smtp_buffered())
- {
- DEBUG(D_any)
- debug_printf("Non-empty input buffer after STARTTLS; naive attack?\n");
- if (tls_in.active < 0)
- smtp_inend = smtp_inptr = smtp_inbuffer;
- /* and if TLS is already active, tls_server_start() should fail */
- }
+ if ( acl_smtp_starttls
+ && (rc = acl_check(ACL_WHERE_STARTTLS, NULL, acl_smtp_starttls,
+ &user_msg, &log_msg)) != OK
+ )
+ {
+ done = smtp_handle_acl_fail(ACL_WHERE_STARTTLS, rc, user_msg, log_msg);
+ break;
+ }
- /* There is nothing we value in the input buffer and if TLS is successfully
- negotiated, we won't use this buffer again; if TLS fails, we'll just read
- fresh content into it. The buffer contains arbitrary content from an
- untrusted remote source; eg: NOOP <shellcode>\r\nSTARTTLS\r\n
- It seems safest to just wipe away the content rather than leave it as a
- target to jump to. */
+ /* RFC 2487 is not clear on when this command may be sent, though it
+ does state that all information previously obtained from the client
+ must be discarded if a TLS session is started. It seems reasonable to
+ do an implied RSET when STARTTLS is received. */
+
+ incomplete_transaction_log(US"STARTTLS");
+ cancel_cutthrough_connection(TRUE, US"STARTTLS received");
+ reset_point = smtp_reset(reset_point);
+ toomany = FALSE;
+ cmd_list[CMD_LIST_STARTTLS].is_mail_cmd = FALSE;
+
+ /* There's an attack where more data is read in past the STARTTLS command
+ before TLS is negotiated, then assumed to be part of the secure session
+ when used afterwards; we use segregated input buffers, so are not
+ vulnerable, but we want to note when it happens and, for sheer paranoia,
+ ensure that the buffer is "wiped".
+ Pipelining sync checks will normally have protected us too, unless disabled
+ by configuration. */
+
+ if (receive_hasc())
+ {
+ DEBUG(D_any)
+ debug_printf("Non-empty input buffer after STARTTLS; naive attack?\n");
+ if (tls_in.active.sock < 0)
+ smtp_inend = smtp_inptr = smtp_inbuffer;
+ /* and if TLS is already active, tls_server_start() should fail */
+ }
- memset(smtp_inbuffer, 0, in_buffer_size);
+ /* There is nothing we value in the input buffer and if TLS is successfully
+ negotiated, we won't use this buffer again; if TLS fails, we'll just read
+ fresh content into it. The buffer contains arbitrary content from an
+ untrusted remote source; eg: NOOP <shellcode>\r\nSTARTTLS\r\n
+ It seems safest to just wipe away the content rather than leave it as a
+ target to jump to. */
- /* Attempt to start up a TLS session, and if successful, discard all
- knowledge that was obtained previously. At least, that's what the RFC says,
- and that's what happens by default. However, in order to work round YAEB,
- there is an option to remember the esmtp state. Sigh.
+ memset(smtp_inbuffer, 0, IN_BUFFER_SIZE);
- We must allow for an extra EHLO command and an extra AUTH command after
- STARTTLS that don't add to the nonmail command count. */
+ /* Attempt to start up a TLS session, and if successful, discard all
+ knowledge that was obtained previously. At least, that's what the RFC says,
+ and that's what happens by default. However, in order to work round YAEB,
+ there is an option to remember the esmtp state. Sigh.
- if ((rc = tls_server_start(tls_require_ciphers)) == OK)
- {
- if (!tls_remember_esmtp)
- helo_seen = esmtp = auth_advertised = pipelining_advertised = FALSE;
- cmd_list[CMD_LIST_EHLO].is_mail_cmd = TRUE;
- cmd_list[CMD_LIST_AUTH].is_mail_cmd = TRUE;
- cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = TRUE;
- if (sender_helo_name != NULL)
- {
- store_free(sender_helo_name);
- sender_helo_name = NULL;
- host_build_sender_fullhost(); /* Rebuild */
- set_process_info("handling incoming TLS connection from %s",
- host_and_ident(FALSE));
- }
- received_protocol =
- (sender_host_address ? protocols : protocols_local)
- [ (esmtp
- ? pextend + (sender_host_authenticated ? pauthed : 0)
- : pnormal)
- + (tls_in.active >= 0 ? pcrpted : 0)
- ];
+ We must allow for an extra EHLO command and an extra AUTH command after
+ STARTTLS that don't add to the nonmail command count. */
- sender_host_authenticated = NULL;
- authenticated_id = NULL;
- sync_cmd_limit = NON_SYNC_CMD_NON_PIPELINING;
- DEBUG(D_tls) debug_printf("TLS active\n");
- break; /* Successful STARTTLS */
- }
+ s = NULL;
+ if ((rc = tls_server_start(&s)) == OK)
+ {
+ if (!tls_remember_esmtp)
+ fl.helo_seen = fl.esmtp = fl.auth_advertised = f.smtp_in_pipelining_advertised = FALSE;
+ cmd_list[CMD_LIST_EHLO].is_mail_cmd = TRUE;
+ cmd_list[CMD_LIST_AUTH].is_mail_cmd = TRUE;
+ cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = TRUE;
+ if (sender_helo_name)
+ {
+ sender_helo_name = NULL;
+ host_build_sender_fullhost(); /* Rebuild */
+ set_process_info("handling incoming TLS connection from %s",
+ host_and_ident(FALSE));
+ }
+ received_protocol =
+ (sender_host_address ? protocols : protocols_local)
+ [ (fl.esmtp
+ ? pextend + (sender_host_authenticated ? pauthed : 0)
+ : pnormal)
+ + (tls_in.active.sock >= 0 ? pcrpted : 0)
+ ];
+
+ sender_host_auth_pubname = sender_host_authenticated = NULL;
+ authenticated_id = NULL;
+ sync_cmd_limit = NON_SYNC_CMD_NON_PIPELINING;
+ DEBUG(D_tls) debug_printf("TLS active\n");
+ break; /* Successful STARTTLS */
+ }
+ else
+ (void) smtp_log_tls_fail(s);
- /* Some local configuration problem was discovered before actually trying
- to do a TLS handshake; give a temporary error. */
+ /* Some local configuration problem was discovered before actually trying
+ to do a TLS handshake; give a temporary error. */
- else if (rc == DEFER)
- {
- smtp_printf("454 TLS currently unavailable\r\n");
- break;
- }
+ if (rc == DEFER)
+ {
+ smtp_printf("454 TLS currently unavailable\r\n", FALSE);
+ break;
+ }
- /* Hard failure. Reject everything except QUIT or closed connection. One
- cause for failure is a nested STARTTLS, in which case tls_in.active remains
- set, but we must still reject all incoming commands. */
+ /* Hard failure. Reject everything except QUIT or closed connection. One
+ cause for failure is a nested STARTTLS, in which case tls_in.active remains
+ set, but we must still reject all incoming commands. Another is a handshake
+ failure - and there may some encrypted data still in the pipe to us, which we
+ see as garbage commands. */
- DEBUG(D_tls) debug_printf("TLS failed to start\n");
- while (done <= 0) switch(smtp_read_command(FALSE))
- {
- case EOF_CMD:
- log_write(L_smtp_connection, LOG_MAIN, "%s closed by EOF",
- smtp_get_connection_info());
- smtp_notquit_exit(US"tls-failed", NULL, NULL);
- done = 2;
- break;
+ DEBUG(D_tls) debug_printf("TLS failed to start\n");
+ while (done <= 0) switch(smtp_read_command(FALSE, GETC_BUFFER_UNLIMITED))
+ {
+ case EOF_CMD:
+ log_write(L_smtp_connection, LOG_MAIN, "%s closed by EOF",
+ smtp_get_connection_info());
+ smtp_notquit_exit(US"tls-failed", NULL, NULL);
+ done = 2;
+ break;
- /* It is perhaps arguable as to which exit ACL should be called here,
- but as it is probably a situation that almost never arises, it
- probably doesn't matter. We choose to call the real QUIT ACL, which in
- some sense is perhaps "right". */
-
- case QUIT_CMD:
- user_msg = NULL;
- if ( acl_smtp_quit
- && ((rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, &user_msg,
- &log_msg)) == ERROR))
- log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s",
- log_msg);
- if (user_msg)
- smtp_respond(US"221", 3, TRUE, user_msg);
- else
- smtp_printf("221 %s closing connection\r\n", smtp_active_hostname);
- log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
- smtp_get_connection_info());
- done = 2;
- break;
+ /* It is perhaps arguable as to which exit ACL should be called here,
+ but as it is probably a situation that almost never arises, it
+ probably doesn't matter. We choose to call the real QUIT ACL, which in
+ some sense is perhaps "right". */
+
+ case QUIT_CMD:
+ f.smtp_in_quit = TRUE;
+ user_msg = NULL;
+ if ( acl_smtp_quit
+ && ((rc = acl_check(ACL_WHERE_QUIT, NULL, acl_smtp_quit, &user_msg,
+ &log_msg)) == ERROR))
+ log_write(0, LOG_MAIN|LOG_PANIC, "ACL for QUIT returned ERROR: %s",
+ log_msg);
+ if (user_msg)
+ smtp_respond(US"221", 3, TRUE, user_msg);
+ else
+ smtp_printf("221 %s closing connection\r\n", FALSE, smtp_active_hostname);
+ log_write(L_smtp_connection, LOG_MAIN, "%s closed by QUIT",
+ smtp_get_connection_info());
+ done = 2;
+ break;
- default:
- smtp_printf("554 Security failure\r\n");
- break;
- }
- tls_close(TRUE, TRUE);
- break;
+ default:
+ smtp_printf("554 Security failure\r\n", FALSE);
+ break;
+ }
+ tls_close(NULL, TLS_SHUTDOWN_NOWAIT);
+ break;
#endif
message. */
case QUIT_CMD:
- smtp_quit_handler(&user_msg, &log_msg);
- done = 2;
- break;
+ smtp_quit_handler(&user_msg, &log_msg);
+ done = 2;
+ break;
case RSET_CMD:
- smtp_rset_handler();
- smtp_reset(reset_point);
- toomany = FALSE;
- break;
+ smtp_rset_handler();
+ cancel_cutthrough_connection(TRUE, US"RSET received");
+ reset_point = smtp_reset(reset_point);
+ toomany = FALSE;
+ break;
case NOOP_CMD:
- HAD(SCH_NOOP);
- smtp_printf("250 OK\r\n");
- break;
+ HAD(SCH_NOOP);
+ smtp_printf("250 OK\r\n", FALSE);
+ break;
/* Show ETRN/EXPN/VRFY if there's an ACL for checking hosts; if actually
response. */
case HELP_CMD:
- HAD(SCH_HELP);
- smtp_printf("214-Commands supported:\r\n");
- {
- uschar buffer[256];
- buffer[0] = 0;
- Ustrcat(buffer, " AUTH");
- #ifdef SUPPORT_TLS
- if (tls_in.active < 0 &&
- verify_check_host(&tls_advertise_hosts) != FAIL)
- Ustrcat(buffer, " STARTTLS");
- #endif
- Ustrcat(buffer, " HELO EHLO MAIL RCPT DATA BDAT");
- Ustrcat(buffer, " NOOP QUIT RSET HELP");
- if (acl_smtp_etrn != NULL) Ustrcat(buffer, " ETRN");
- if (acl_smtp_expn != NULL) Ustrcat(buffer, " EXPN");
- if (acl_smtp_vrfy != NULL) Ustrcat(buffer, " VRFY");
- smtp_printf("214%s\r\n", buffer);
- }
- break;
+ HAD(SCH_HELP);
+ smtp_printf("214-Commands supported:\r\n", TRUE);
+ {
+ uschar buffer[256];
+ buffer[0] = 0;
+ Ustrcat(buffer, US" AUTH");
+ #ifndef DISABLE_TLS
+ if (tls_in.active.sock < 0 &&
+ verify_check_host(&tls_advertise_hosts) != FAIL)
+ Ustrcat(buffer, US" STARTTLS");
+ #endif
+ Ustrcat(buffer, US" HELO EHLO MAIL RCPT DATA BDAT");
+ Ustrcat(buffer, US" NOOP QUIT RSET HELP");
+ if (acl_smtp_etrn) Ustrcat(buffer, US" ETRN");
+ if (acl_smtp_expn) Ustrcat(buffer, US" EXPN");
+ if (acl_smtp_vrfy) Ustrcat(buffer, US" VRFY");
+ smtp_printf("214%s\r\n", FALSE, buffer);
+ }
+ break;
case EOF_CMD:
- incomplete_transaction_log(US"connection lost");
- smtp_notquit_exit(US"connection-lost", US"421",
- US"%s lost input connection", smtp_active_hostname);
+ incomplete_transaction_log(US"connection lost");
+ smtp_notquit_exit(US"connection-lost", US"421",
+ US"%s lost input connection", smtp_active_hostname);
+
+ /* Don't log by default unless in the middle of a message, as some mailers
+ just drop the call rather than sending QUIT, and it clutters up the logs.
+ */
+
+ if (sender_address || recipients_count > 0)
+ log_write(L_lost_incoming_connection, LOG_MAIN,
+ "unexpected %s while reading SMTP command from %s%s%s D=%s",
+ f.sender_host_unknown ? "EOF" : "disconnection",
+ f.tcp_in_fastopen_logged
+ ? US""
+ : f.tcp_in_fastopen
+ ? f.tcp_in_fastopen_data ? US"TFO* " : US"TFO "
+ : US"",
+ host_and_ident(FALSE), smtp_read_error,
+ string_timesince(&smtp_connection_start)
+ );
- /* Don't log by default unless in the middle of a message, as some mailers
- just drop the call rather than sending QUIT, and it clutters up the logs.
- */
+ else
+ log_write(L_smtp_connection, LOG_MAIN, "%s %slost%s D=%s",
+ smtp_get_connection_info(),
+ f.tcp_in_fastopen && !f.tcp_in_fastopen_logged ? US"TFO " : US"",
+ smtp_read_error,
+ string_timesince(&smtp_connection_start)
+ );
+
+ done = 1;
+ break;
- if (sender_address != NULL || recipients_count > 0)
- log_write(L_lost_incoming_connection,
- LOG_MAIN,
- "unexpected %s while reading SMTP command from %s%s",
- sender_host_unknown? "EOF" : "disconnection",
- host_and_ident(FALSE), smtp_read_error);
- else log_write(L_smtp_connection, LOG_MAIN, "%s lost%s",
- smtp_get_connection_info(), smtp_read_error);
+ case ETRN_CMD:
+ HAD(SCH_ETRN);
+ if (sender_address)
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"ETRN is not permitted inside a transaction");
+ break;
+ }
- done = 1;
- break;
+ log_write(L_etrn, LOG_MAIN, "ETRN %s received from %s", smtp_cmd_argument,
+ host_and_ident(FALSE));
+ if ((rc = acl_check(ACL_WHERE_ETRN, NULL, acl_smtp_etrn,
+ &user_msg, &log_msg)) != OK)
+ {
+ done = smtp_handle_acl_fail(ACL_WHERE_ETRN, rc, user_msg, log_msg);
+ break;
+ }
- case ETRN_CMD:
- HAD(SCH_ETRN);
- if (sender_address != NULL)
- {
- done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"ETRN is not permitted inside a transaction");
- break;
- }
+ /* Compute the serialization key for this command. */
- log_write(L_etrn, LOG_MAIN, "ETRN %s received from %s", smtp_cmd_argument,
- host_and_ident(FALSE));
+ etrn_serialize_key = string_sprintf("etrn-%s\n", smtp_cmd_data);
- if ((rc = acl_check(ACL_WHERE_ETRN, NULL, acl_smtp_etrn,
- &user_msg, &log_msg)) != OK)
- {
- done = smtp_handle_acl_fail(ACL_WHERE_ETRN, rc, user_msg, log_msg);
- break;
- }
+ /* If a command has been specified for running as a result of ETRN, we
+ permit any argument to ETRN. If not, only the # standard form is permitted,
+ since that is strictly the only kind of ETRN that can be implemented
+ according to the RFC. */
- /* Compute the serialization key for this command. */
+ if (smtp_etrn_command)
+ {
+ uschar *error;
+ BOOL rc;
+ etrn_command = smtp_etrn_command;
+ deliver_domain = smtp_cmd_data;
+ rc = transport_set_up_command(&argv, smtp_etrn_command, TRUE, 0, NULL,
+ FALSE, US"ETRN processing", &error);
+ deliver_domain = NULL;
+ if (!rc)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "failed to set up ETRN command: %s",
+ error);
+ smtp_printf("458 Internal failure\r\n", FALSE);
+ break;
+ }
+ }
- etrn_serialize_key = string_sprintf("etrn-%s\n", smtp_cmd_data);
+ /* Else set up to call Exim with the -R option. */
- /* If a command has been specified for running as a result of ETRN, we
- permit any argument to ETRN. If not, only the # standard form is permitted,
- since that is strictly the only kind of ETRN that can be implemented
- according to the RFC. */
+ else
+ {
+ if (*smtp_cmd_data++ != '#')
+ {
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"argument must begin with #");
+ break;
+ }
+ etrn_command = US"exim -R";
+ argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE,
+ *queue_name ? 4 : 2,
+ US"-R", smtp_cmd_data,
+ US"-MCG", queue_name);
+ }
- if (smtp_etrn_command != NULL)
- {
- uschar *error;
- BOOL rc;
- etrn_command = smtp_etrn_command;
- deliver_domain = smtp_cmd_data;
- rc = transport_set_up_command(&argv, smtp_etrn_command, TRUE, 0, NULL,
- US"ETRN processing", &error);
- deliver_domain = NULL;
- if (!rc)
- {
- log_write(0, LOG_MAIN|LOG_PANIC, "failed to set up ETRN command: %s",
- error);
- smtp_printf("458 Internal failure\r\n");
- break;
- }
- }
+ /* If we are host-testing, don't actually do anything. */
- /* Else set up to call Exim with the -R option. */
+ if (host_checking)
+ {
+ HDEBUG(D_any)
+ {
+ debug_printf("ETRN command is: %s\n", etrn_command);
+ debug_printf("ETRN command execution skipped\n");
+ }
+ if (user_msg == NULL) smtp_printf("250 OK\r\n", FALSE);
+ else smtp_user_msg(US"250", user_msg);
+ break;
+ }
- else
- {
- if (*smtp_cmd_data++ != '#')
- {
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"argument must begin with #");
- break;
- }
- etrn_command = US"exim -R";
- argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE,
- *queue_name ? 4 : 2,
- US"-R", smtp_cmd_data,
- US"-MCG", queue_name);
- }
- /* If we are host-testing, don't actually do anything. */
+ /* If ETRN queue runs are to be serialized, check the database to
+ ensure one isn't already running. */
- if (host_checking)
- {
- HDEBUG(D_any)
- {
- debug_printf("ETRN command is: %s\n", etrn_command);
- debug_printf("ETRN command execution skipped\n");
- }
- if (user_msg == NULL) smtp_printf("250 OK\r\n");
- else smtp_user_msg(US"250", user_msg);
- break;
- }
+ if (smtp_etrn_serialize && !enq_start(etrn_serialize_key, 1))
+ {
+ smtp_printf("458 Already processing %s\r\n", FALSE, smtp_cmd_data);
+ break;
+ }
+ /* Fork a child process and run the command. We don't want to have to
+ wait for the process at any point, so set SIGCHLD to SIG_IGN before
+ forking. It should be set that way anyway for external incoming SMTP,
+ but we save and restore to be tidy. If serialization is required, we
+ actually run the command in yet another process, so we can wait for it
+ to complete and then remove the serialization lock. */
- /* If ETRN queue runs are to be serialized, check the database to
- ensure one isn't already running. */
+ oldsignal = signal(SIGCHLD, SIG_IGN);
- if (smtp_etrn_serialize && !enq_start(etrn_serialize_key, 1))
- {
- smtp_printf("458 Already processing %s\r\n", smtp_cmd_data);
- break;
- }
+ if ((pid = exim_fork(US"etrn-command")) == 0)
+ {
+ smtp_input = FALSE; /* This process is not associated with the */
+ (void)fclose(smtp_in); /* SMTP call any more. */
+ (void)fclose(smtp_out);
- /* Fork a child process and run the command. We don't want to have to
- wait for the process at any point, so set SIGCHLD to SIG_IGN before
- forking. It should be set that way anyway for external incoming SMTP,
- but we save and restore to be tidy. If serialization is required, we
- actually run the command in yet another process, so we can wait for it
- to complete and then remove the serialization lock. */
+ signal(SIGCHLD, SIG_DFL); /* Want to catch child */
- oldsignal = signal(SIGCHLD, SIG_IGN);
+ /* If not serializing, do the exec right away. Otherwise, fork down
+ into another process. */
- if ((pid = fork()) == 0)
- {
- smtp_input = FALSE; /* This process is not associated with the */
- (void)fclose(smtp_in); /* SMTP call any more. */
- (void)fclose(smtp_out);
+ if ( !smtp_etrn_serialize
+ || (pid = exim_fork(US"etrn-serialised-command")) == 0)
+ {
+ DEBUG(D_exec) debug_print_argv(argv);
+ exim_nullstd(); /* Ensure std{in,out,err} exist */
+ /* argv[0] should be untainted, from child_exec_exim() */
+ execv(CS argv[0], (char *const *)argv);
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "exec of \"%s\" (ETRN) failed: %s",
+ etrn_command, strerror(errno));
+ _exit(EXIT_FAILURE); /* paranoia */
+ }
- signal(SIGCHLD, SIG_DFL); /* Want to catch child */
+ /* Obey this if smtp_serialize and the 2nd fork yielded non-zero. That
+ is, we are in the first subprocess, after forking again. All we can do
+ for a failing fork is to log it. Otherwise, wait for the 2nd process to
+ complete, before removing the serialization. */
- /* If not serializing, do the exec right away. Otherwise, fork down
- into another process. */
+ if (pid < 0)
+ log_write(0, LOG_MAIN|LOG_PANIC, "2nd fork for serialized ETRN "
+ "failed: %s", strerror(errno));
+ else
+ {
+ int status;
+ DEBUG(D_any) debug_printf("waiting for serialized ETRN process %d\n",
+ (int)pid);
+ (void)wait(&status);
+ DEBUG(D_any) debug_printf("serialized ETRN process %d ended\n",
+ (int)pid);
+ }
- if (!smtp_etrn_serialize || (pid = fork()) == 0)
- {
- DEBUG(D_exec) debug_print_argv(argv);
- exim_nullstd(); /* Ensure std{in,out,err} exist */
- execv(CS argv[0], (char *const *)argv);
- log_write(0, LOG_MAIN|LOG_PANIC_DIE, "exec of \"%s\" (ETRN) failed: %s",
- etrn_command, strerror(errno));
- _exit(EXIT_FAILURE); /* paranoia */
- }
+ enq_end(etrn_serialize_key);
+ exim_underbar_exit(EXIT_SUCCESS);
+ }
- /* Obey this if smtp_serialize and the 2nd fork yielded non-zero. That
- is, we are in the first subprocess, after forking again. All we can do
- for a failing fork is to log it. Otherwise, wait for the 2nd process to
- complete, before removing the serialization. */
+ /* Back in the top level SMTP process. Check that we started a subprocess
+ and restore the signal state. */
if (pid < 0)
- log_write(0, LOG_MAIN|LOG_PANIC, "2nd fork for serialized ETRN "
- "failed: %s", strerror(errno));
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "fork of process for ETRN failed: %s",
+ strerror(errno));
+ smtp_printf("458 Unable to fork process\r\n", FALSE);
+ if (smtp_etrn_serialize) enq_end(etrn_serialize_key);
+ }
else
- {
- int status;
- DEBUG(D_any) debug_printf("waiting for serialized ETRN process %d\n",
- (int)pid);
- (void)wait(&status);
- DEBUG(D_any) debug_printf("serialized ETRN process %d ended\n",
- (int)pid);
- }
-
- enq_end(etrn_serialize_key);
- _exit(EXIT_SUCCESS);
- }
-
- /* Back in the top level SMTP process. Check that we started a subprocess
- and restore the signal state. */
-
- if (pid < 0)
- {
- log_write(0, LOG_MAIN|LOG_PANIC, "fork of process for ETRN failed: %s",
- strerror(errno));
- smtp_printf("458 Unable to fork process\r\n");
- if (smtp_etrn_serialize) enq_end(etrn_serialize_key);
- }
- else
- {
- if (user_msg == NULL) smtp_printf("250 OK\r\n");
- else smtp_user_msg(US"250", user_msg);
- }
+ if (!user_msg)
+ smtp_printf("250 OK\r\n", FALSE);
+ else
+ smtp_user_msg(US"250", user_msg);
- signal(SIGCHLD, oldsignal);
- break;
+ signal(SIGCHLD, oldsignal);
+ break;
case BADARG_CMD:
- done = synprot_error(L_smtp_syntax_error, 501, NULL,
- US"unexpected argument data");
- break;
+ done = synprot_error(L_smtp_syntax_error, 501, NULL,
+ US"unexpected argument data");
+ break;
/* This currently happens only for NULLs, but could be extended. */
case BADCHAR_CMD:
- done = synprot_error(L_smtp_syntax_error, 0, NULL, /* Just logs */
- US"NULL character(s) present (shown as '?')");
- smtp_printf("501 NULL characters are not allowed in SMTP commands\r\n");
- break;
+ done = synprot_error(L_smtp_syntax_error, 0, NULL, /* Just logs */
+ US"NUL character(s) present (shown as '?')");
+ smtp_printf("501 NUL characters are not allowed in SMTP commands\r\n",
+ FALSE);
+ break;
case BADSYN_CMD:
SYNC_FAILURE:
- if (smtp_inend >= smtp_inbuffer + in_buffer_size)
- smtp_inend = smtp_inbuffer + in_buffer_size - 1;
- c = smtp_inend - smtp_inptr;
- if (c > 150) c = 150;
- smtp_inptr[c] = 0;
- incomplete_transaction_log(US"sync failure");
- log_write(0, LOG_MAIN|LOG_REJECT, "SMTP protocol synchronization error "
- "(next input sent too soon: pipelining was%s advertised): "
- "rejected \"%s\" %s next input=\"%s\"",
- pipelining_advertised? "" : " not",
- smtp_cmd_buffer, host_and_ident(TRUE),
- string_printing(smtp_inptr));
- smtp_notquit_exit(US"synchronization-error", US"554",
- US"SMTP synchronization error");
- done = 1; /* Pretend eof - drops connection */
- break;
+ if (smtp_inend >= smtp_inbuffer + IN_BUFFER_SIZE)
+ smtp_inend = smtp_inbuffer + IN_BUFFER_SIZE - 1;
+ c = smtp_inend - smtp_inptr;
+ if (c > 150) c = 150; /* limit logged amount */
+ smtp_inptr[c] = 0;
+ incomplete_transaction_log(US"sync failure");
+ log_write(0, LOG_MAIN|LOG_REJECT, "SMTP protocol synchronization error "
+ "(next input sent too soon: pipelining was%s advertised): "
+ "rejected \"%s\" %s next input=\"%s\"",
+ f.smtp_in_pipelining_advertised ? "" : " not",
+ smtp_cmd_buffer, host_and_ident(TRUE),
+ string_printing(smtp_inptr));
+ smtp_notquit_exit(US"synchronization-error", US"554",
+ US"SMTP synchronization error");
+ done = 1; /* Pretend eof - drops connection */
+ break;
case TOO_MANY_NONMAIL_CMD:
- s = smtp_cmd_buffer;
- while (*s != 0 && !isspace(*s)) s++;
- incomplete_transaction_log(US"too many non-mail commands");
- log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
- "nonmail commands (last was \"%.*s\")", host_and_ident(FALSE),
- (int)(s - smtp_cmd_buffer), smtp_cmd_buffer);
- smtp_notquit_exit(US"bad-commands", US"554", US"Too many nonmail commands");
- done = 1; /* Pretend eof - drops connection */
- break;
+ s = smtp_cmd_buffer;
+ while (*s != 0 && !isspace(*s)) s++;
+ incomplete_transaction_log(US"too many non-mail commands");
+ log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
+ "nonmail commands (last was \"%.*s\")", host_and_ident(FALSE),
+ (int)(s - smtp_cmd_buffer), smtp_cmd_buffer);
+ smtp_notquit_exit(US"bad-commands", US"554", US"Too many nonmail commands");
+ done = 1; /* Pretend eof - drops connection */
+ break;
#ifdef SUPPORT_PROXY
case PROXY_FAIL_IGNORE_CMD:
- smtp_printf("503 Command refused, required Proxy negotiation failed\r\n");
- break;
+ smtp_printf("503 Command refused, required Proxy negotiation failed\r\n", FALSE);
+ break;
#endif
default:
- if (unknown_command_count++ >= smtp_max_unknown_commands)
- {
- log_write(L_smtp_syntax_error, LOG_MAIN,
- "SMTP syntax error in \"%s\" %s %s",
- string_printing(smtp_cmd_buffer), host_and_ident(TRUE),
- US"unrecognized command");
- incomplete_transaction_log(US"unrecognized command");
- smtp_notquit_exit(US"bad-commands", US"500",
- US"Too many unrecognized commands");
- done = 2;
- log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
- "unrecognized commands (last was \"%s\")", host_and_ident(FALSE),
- string_printing(smtp_cmd_buffer));
- }
- else
- done = synprot_error(L_smtp_syntax_error, 500, NULL,
- US"unrecognized command");
- break;
+ if (unknown_command_count++ >= smtp_max_unknown_commands)
+ {
+ log_write(L_smtp_syntax_error, LOG_MAIN,
+ "SMTP syntax error in \"%s\" %s %s",
+ string_printing(smtp_cmd_buffer), host_and_ident(TRUE),
+ US"unrecognized command");
+ incomplete_transaction_log(US"unrecognized command");
+ smtp_notquit_exit(US"bad-commands", US"500",
+ US"Too many unrecognized commands");
+ done = 2;
+ log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
+ "unrecognized commands (last was \"%s\")", host_and_ident(FALSE),
+ string_printing(smtp_cmd_buffer));
+ }
+ else
+ done = synprot_error(L_smtp_syntax_error, 500, NULL,
+ US"unrecognized command");
+ break;
}
/* This label is used by goto's inside loops that want to break out to
COMMAND_LOOP:
last_was_rej_mail = was_rej_mail; /* Remember some last commands for */
last_was_rcpt = was_rcpt; /* protocol error handling */
- continue;
}
return done - 2; /* Convert yield values */
}
+
+
+gstring *
+authres_smtpauth(gstring * g)
+{
+if (!sender_host_authenticated)
+ return g;
+
+g = string_append(g, 2, US";\n\tauth=pass (", sender_host_auth_pubname);
+
+if (Ustrcmp(sender_host_auth_pubname, "tls") == 0)
+ g = authenticated_id
+ ? string_append(g, 2, US") x509.auth=", authenticated_id)
+ : string_cat(g, US") reason=x509.auth");
+else
+ g = authenticated_id
+ ? string_append(g, 2, US") smtp.auth=", authenticated_id)
+ : string_cat(g, US", no id saved)");
+
+if (authenticated_sender)
+ g = string_append(g, 2, US" smtp.mailfrom=", authenticated_sender);
+return g;
+}
+
+
+
/* vi: aw ai sw=2
*/
/* End of smtp_in.c */
git://git.exim.org / exim.git / blobdiff