OPTIONS
+ -b Behave as if each regex has the /B (show bytecode) modifier;
+ the internal form is output after compilation.
+
-C Output the version number of the PCRE library, and all avail-
- able information about the optional features that are
+ able information about the optional features that are
included, and then exit.
- -d Behave as if each regex has the /D (debug) modifier; the
- internal form is output after compilation.
+ -d Behave as if each regex has the /D (debug) modifier; the
+ internal form and information about the compiled pattern is
+ output after compilation; -d is equivalent to -b -i.
-dfa Behave as if each data line contains the \D escape sequence;
this causes the alternative matching function,
pcre_dfa_exec(), to be used instead of the standard
pcre_exec() function (more detail is given below).
+ -help Output a brief summary these options and then exit.
+
-i Behave as if each regex has the /I modifier; information
about the compiled pattern is given after compilation.
pcretest, -s is a synonym for -m.
-o osize Set the number of elements in the output vector that is used
- when calling pcre_exec() to be osize. The default value is
- 45, which is enough for 14 capturing subexpressions. The vec-
- tor size can be changed for individual matching calls by
- including \O in the data line (see below).
+ when calling pcre_exec() or pcre_dfa_exec() to be osize. The
+ default value is 45, which is enough for 14 capturing subex-
+ pressions for pcre_exec() or 22 different matches for
+ pcre_dfa_exec(). The vector size can be changed for individ-
+ ual matching calls by including \O in the data line (see
+ below).
-p Behave as if each regex has the /P modifier; the POSIX wrap-
per API is used to call PCRE. None of the other options has
and output resulting time per compile or match (in millisec-
onds). Do not set -m with -t, because you will then get the
size output a zillion times, and the timing will be dis-
- torted.
+ torted. You can control the number of iterations that are
+ used for timing by following -t with a number (as a separate
+ item on the command line). For example, "-t 1000" would iter-
+ ate 1000 times. The default is to iterate 500000 times.
+
+ -tm This is like -t except that it times only the matching phase,
+ not the compile or study phases.
DESCRIPTION
Each data line is matched separately and independently. If you want to
do multi-line matches, you have to use the \n escape sequence (or \r or
- \r\n, depending on the newline setting) in a single line of input to
- encode the newline characters. There is no limit on the length of data
- lines; the input buffer is automatically extended if it is too small.
+ \r\n, etc., depending on the newline setting) in a single line of input
+ to encode the newline sequences. There is no limit on the length of
+ data lines; the input buffer is automatically extended if it is too
+ small.
- An empty line signals the end of the data lines, at which point a new
- regular expression is read. The regular expressions are given enclosed
+ An empty line signals the end of the data lines, at which point a new
+ regular expression is read. The regular expressions are given enclosed
in any non-alphanumeric delimiters other than backslash, for example:
/(a|bc)x+yz/
- White space before the initial delimiter is ignored. A regular expres-
- sion may be continued over several input lines, in which case the new-
- line characters are included within it. It is possible to include the
+ White space before the initial delimiter is ignored. A regular expres-
+ sion may be continued over several input lines, in which case the new-
+ line characters are included within it. It is possible to include the
delimiter within the pattern by escaping it, for example
/abc\/def/
- If you do so, the escape and the delimiter form part of the pattern,
- but since delimiters are always non-alphanumeric, this does not affect
- its interpretation. If the terminating delimiter is immediately fol-
+ If you do so, the escape and the delimiter form part of the pattern,
+ but since delimiters are always non-alphanumeric, this does not affect
+ its interpretation. If the terminating delimiter is immediately fol-
lowed by a backslash, for example,
/abc/\
- then a backslash is added to the end of the pattern. This is done to
- provide a way of testing the error condition that arises if a pattern
+ then a backslash is added to the end of the pattern. This is done to
+ provide a way of testing the error condition that arises if a pattern
finishes with a backslash, because
/abc\/
- is interpreted as the first line of a pattern that starts with "abc/",
+ is interpreted as the first line of a pattern that starts with "abc/",
causing pcretest to read the next line as a continuation of the regular
expression.
PATTERN MODIFIERS
- A pattern may be followed by any number of modifiers, which are mostly
- single characters. Following Perl usage, these are referred to below
- as, for example, "the /i modifier", even though the delimiter of the
- pattern need not always be a slash, and no slash is used when writing
- modifiers. Whitespace may appear between the final pattern delimiter
+ A pattern may be followed by any number of modifiers, which are mostly
+ single characters. Following Perl usage, these are referred to below
+ as, for example, "the /i modifier", even though the delimiter of the
+ pattern need not always be a slash, and no slash is used when writing
+ modifiers. Whitespace may appear between the final pattern delimiter
and the first modifier, and between the modifiers themselves.
The /i, /m, /s, and /x modifiers set the PCRE_CASELESS, PCRE_MULTILINE,
- PCRE_DOTALL, or PCRE_EXTENDED options, respectively, when pcre_com-
- pile() is called. These four modifier letters have the same effect as
+ PCRE_DOTALL, or PCRE_EXTENDED options, respectively, when pcre_com-
+ pile() is called. These four modifier letters have the same effect as
they do in Perl. For example:
/caseless/i
The following table shows additional modifiers for setting PCRE options
that do not correspond to anything in Perl:
- /A PCRE_ANCHORED
- /C PCRE_AUTO_CALLOUT
- /E PCRE_DOLLAR_ENDONLY
- /f PCRE_FIRSTLINE
- /J PCRE_DUPNAMES
- /N PCRE_NO_AUTO_CAPTURE
- /U PCRE_UNGREEDY
- /X PCRE_EXTRA
- /<cr> PCRE_NEWLINE_CR
- /<lf> PCRE_NEWLINE_LF
- /<crlf> PCRE_NEWLINE_CRLF
-
- Those specifying line endings are literal strings as shown. Details of
- the meanings of these PCRE options are given in the pcreapi documenta-
- tion.
+ /A PCRE_ANCHORED
+ /C PCRE_AUTO_CALLOUT
+ /E PCRE_DOLLAR_ENDONLY
+ /f PCRE_FIRSTLINE
+ /J PCRE_DUPNAMES
+ /N PCRE_NO_AUTO_CAPTURE
+ /U PCRE_UNGREEDY
+ /X PCRE_EXTRA
+ /<cr> PCRE_NEWLINE_CR
+ /<lf> PCRE_NEWLINE_LF
+ /<crlf> PCRE_NEWLINE_CRLF
+ /<anycrlf> PCRE_NEWLINE_ANYCRLF
+ /<any> PCRE_NEWLINE_ANY
+
+ Those specifying line ending sequencess are literal strings as shown.
+ This example sets multiline matching with CRLF as the line ending
+ sequence:
+
+ /^abc/m<crlf>
+
+ Details of the meanings of these PCRE options are given in the pcreapi
+ documentation.
Finding all matches in a string
remainder of the subject string. This is useful for tests where the
subject contains multiple copies of the same substring.
- The /L modifier must be followed directly by the name of a locale, for
+ The /B modifier is a debugging feature. It requests that pcretest out-
+ put a representation of the compiled byte code after compilation. Nor-
+ mally this information contains length and offset values; however, if
+ /Z is also present, this data is replaced by spaces. This is a special
+ feature for use in the automatic test scripts; it ensures that the same
+ output is generated for different internal link sizes.
+
+ The /L modifier must be followed directly by the name of a locale, for
example,
/pattern/Lfr_FR
For this reason, it must be the last modifier. The given locale is set,
- pcre_maketables() is called to build a set of character tables for the
- locale, and this is then passed to pcre_compile() when compiling the
- regular expression. Without an /L modifier, NULL is passed as the
- tables pointer; that is, /L applies only to the expression on which it
+ pcre_maketables() is called to build a set of character tables for the
+ locale, and this is then passed to pcre_compile() when compiling the
+ regular expression. Without an /L modifier, NULL is passed as the
+ tables pointer; that is, /L applies only to the expression on which it
appears.
- The /I modifier requests that pcretest output information about the
- compiled pattern (whether it is anchored, has a fixed first character,
- and so on). It does this by calling pcre_fullinfo() after compiling a
- pattern. If the pattern is studied, the results of that are also out-
+ The /I modifier requests that pcretest output information about the
+ compiled pattern (whether it is anchored, has a fixed first character,
+ and so on). It does this by calling pcre_fullinfo() after compiling a
+ pattern. If the pattern is studied, the results of that are also out-
put.
- The /D modifier is a PCRE debugging feature, which also assumes /I. It
- causes the internal form of compiled regular expressions to be output
- after compilation. If the pattern was studied, the information returned
- is also output.
+ The /D modifier is a PCRE debugging feature, and is equivalent to /BI,
+ that is, both the /B and the /I modifiers.
The /F modifier causes pcretest to flip the byte order of the fields in
- the compiled pattern that contain 2-byte and 4-byte numbers. This
- facility is for testing the feature in PCRE that allows it to execute
+ the compiled pattern that contain 2-byte and 4-byte numbers. This
+ facility is for testing the feature in PCRE that allows it to execute
patterns that were compiled on a host with a different endianness. This
- feature is not available when the POSIX interface to PCRE is being
- used, that is, when the /P pattern modifier is specified. See also the
+ feature is not available when the POSIX interface to PCRE is being
+ used, that is, when the /P pattern modifier is specified. See also the
section about saving and reloading compiled patterns below.
- The /S modifier causes pcre_study() to be called after the expression
+ The /S modifier causes pcre_study() to be called after the expression
has been compiled, and the results used when the expression is matched.
- The /M modifier causes the size of memory block used to hold the com-
+ The /M modifier causes the size of memory block used to hold the com-
piled pattern to be output.
- The /P modifier causes pcretest to call PCRE via the POSIX wrapper API
- rather than its native API. When this is done, all other modifiers
- except /i, /m, and /+ are ignored. REG_ICASE is set if /i is present,
- and REG_NEWLINE is set if /m is present. The wrapper functions force
- PCRE_DOLLAR_ENDONLY always, and PCRE_DOTALL unless REG_NEWLINE is set.
+ The /P modifier causes pcretest to call PCRE via the POSIX wrapper API
+ rather than its native API. When this is done, all other modifiers
+ except /i, /m, and /+ are ignored. REG_ICASE is set if /i is present,
+ and REG_NEWLINE is set if /m is present. The wrapper functions force
+ PCRE_DOLLAR_ENDONLY always, and PCRE_DOTALL unless REG_NEWLINE is set.
- The /8 modifier causes pcretest to call PCRE with the PCRE_UTF8 option
- set. This turns on support for UTF-8 character handling in PCRE, pro-
- vided that it was compiled with this support enabled. This modifier
+ The /8 modifier causes pcretest to call PCRE with the PCRE_UTF8 option
+ set. This turns on support for UTF-8 character handling in PCRE, pro-
+ vided that it was compiled with this support enabled. This modifier
also causes any non-printing characters in output strings to be printed
using the \x{hh...} notation if they are valid UTF-8 sequences.
- If the /? modifier is used with /8, it causes pcretest to call
- pcre_compile() with the PCRE_NO_UTF8_CHECK option, to suppress the
+ If the /? modifier is used with /8, it causes pcretest to call
+ pcre_compile() with the PCRE_NO_UTF8_CHECK option, to suppress the
checking of the string for UTF-8 validity.
DATA LINES
- Before each data line is passed to pcre_exec(), leading and trailing
- whitespace is removed, and it is then scanned for \ escapes. Some of
- these are pretty esoteric features, intended for checking out some of
- the more complicated features of PCRE. If you are just testing "ordi-
- nary" regular expressions, you probably don't need any of these. The
+ Before each data line is passed to pcre_exec(), leading and trailing
+ whitespace is removed, and it is then scanned for \ escapes. Some of
+ these are pretty esoteric features, intended for checking out some of
+ the more complicated features of PCRE. If you are just testing "ordi-
+ nary" regular expressions, you probably don't need any of these. The
following escapes are recognized:
- \a alarm (= BEL)
- \b backspace
- \e escape
- \f formfeed
- \n newline
+ \a alarm (BEL, \x07)
+ \b backspace (\x08)
+ \e escape (\x27)
+ \f formfeed (\x0c)
+ \n newline (\x0a)
\qdd set the PCRE_MATCH_LIMIT limit to dd
(any number of digits)
- \r carriage return
- \t tab
- \v vertical tab
+ \r carriage return (\x0d)
+ \t tab (\x09)
+ \v vertical tab (\x0b)
\nnn octal character (up to 3 octal digits)
\xhh hexadecimal character (up to 2 hex digits)
\x{hh...} hexadecimal character, any number of digits
or pcre_dfa_exec()
\<crlf> pass the PCRE_NEWLINE_CRLF option to pcre_exec()
or pcre_dfa_exec()
+ \<anycrlf> pass the PCRE_NEWLINE_ANYCRLF option to pcre_exec()
+ or pcre_dfa_exec()
+ \<any> pass the PCRE_NEWLINE_ANY option to pcre_exec()
+ or pcre_dfa_exec()
- The escapes that specify line endings are literal strings, exactly as
- shown. A backslash followed by anything else just escapes the anything
- else. If the very last character is a backslash, it is ignored. This
- gives a way of passing an empty line as data, since a real empty line
- terminates the data input.
+ The escapes that specify line ending sequences are literal strings,
+ exactly as shown. No more than one newline setting should be present in
+ any data line.
+
+ A backslash followed by anything else just escapes the anything else.
+ If the very last character is a backslash, it is ignored. This gives a
+ way of passing an empty line as data, since a real empty line termi-
+ nates the data input.
If \M is present, pcretest calls pcre_exec() several times, with dif-
ferent values in the match_limit and match_limit_recursion fields of
is an example of an interactive pcretest run.
$ pcretest
- PCRE version 5.00 07-Sep-2004
+ PCRE version 7.0 30-Nov-2006
re> /^abc(\d+)/
data> abc123
If the strings contain any non-printing characters, they are output as
\0x escapes, or as \x{...} escapes if the /8 modifier was present on
- the pattern. If the pattern has the /+ modifier, the output for sub-
- string 0 is followed by the the rest of the subject string, identified
- by "0+" like this:
+ the pattern. See below for the definition of non-printing characters.
+ If the pattern has the /+ modifier, the output for substring 0 is fol-
+ lowed by the the rest of the subject string, identified by "0+" like
+ this:
re> /cat/+
data> cataract
0: cat
0+ aract
- If the pattern has the /g or /G modifier, the results of successive
+ If the pattern has the /g or /G modifier, the results of successive
matching attempts are output in sequence, like this:
re> /\Bi(\w\w)/g
"No match" is output only if the first match attempt fails.
- If any of the sequences \C, \G, or \L are present in a data line that
- is successfully matched, the substrings extracted by the convenience
+ If any of the sequences \C, \G, or \L are present in a data line that
+ is successfully matched, the substrings extracted by the convenience
functions are output with C, G, or L after the string number instead of
a colon. This is in addition to the normal full list. The string length
- (that is, the return from the extraction function) is given in paren-
+ (that is, the return from the extraction function) is given in paren-
theses after each string for \C and \G.
- Note that while patterns can be continued over several lines (a plain
+ Note that whereas patterns can be continued over several lines (a plain
">" prompt is used for continuations), data lines may not. However new-
- lines can be included in data by means of the \n escape (or \r or \r\n
- for those newline settings).
+ lines can be included in data by means of the \n escape (or \r, \r\n,
+ etc., depending on the newline sequence setting).
OUTPUT FROM THE ALTERNATIVE MATCHING FUNCTION
- When the alternative matching function, pcre_dfa_exec(), is used (by
- means of the \D escape sequence or the -dfa command line option), the
- output consists of a list of all the matches that start at the first
+ When the alternative matching function, pcre_dfa_exec(), is used (by
+ means of the \D escape sequence or the -dfa command line option), the
+ output consists of a list of all the matches that start at the first
point in the subject where there is at least one match. For example:
re> /(tang|tangerine|tan)/
1: tang
2: tan
- (Using the normal matching function on this data finds only "tang".)
- The longest matching string is always given first (and numbered zero).
+ (Using the normal matching function on this data finds only "tang".)
+ The longest matching string is always given first (and numbered zero).
- If /gP is present on the pattern, the search for further matches
- resumes at the end of the longest match. For example:
+ If /g is present on the pattern, the search for further matches resumes
+ at the end of the longest match. For example:
re> /(tang|tangerine|tan)/g
data> yellow tangerine and tangy sultana\D
1: tan
0: tan
- Since the matching function does not support substring capture, the
- escape sequences that are concerned with captured substrings are not
+ Since the matching function does not support substring capture, the
+ escape sequences that are concerned with captured substrings are not
relevant.
RESTARTING AFTER A PARTIAL MATCH
When the alternative matching function has given the PCRE_ERROR_PARTIAL
- return, indicating that the subject partially matched the pattern, you
- can restart the match with additional subject data by means of the \R
+ return, indicating that the subject partially matched the pattern, you
+ can restart the match with additional subject data by means of the \R
escape sequence. For example:
- re> /^?(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)$/
+ re> /^\d?\d(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)\d\d$/
data> 23ja\P\D
Partial match: 23ja
data> n05\R\D
0: n05
- For further information about partial matching, see the pcrepartial
+ For further information about partial matching, see the pcrepartial
documentation.
CALLOUTS
- If the pattern contains any callout requests, pcretest's callout func-
- tion is called during matching. This works with both matching func-
+ If the pattern contains any callout requests, pcretest's callout func-
+ tion is called during matching. This works with both matching func-
tions. By default, the called function displays the callout number, the
- start and current positions in the text at the callout time, and the
+ start and current positions in the text at the callout time, and the
next pattern item to be tested. For example, the output
--->pqrabcdef
0 ^ ^ \d
- indicates that callout number 0 occurred for a match attempt starting
- at the fourth character of the subject string, when the pointer was at
- the seventh character of the data, and when the next pattern item was
- \d. Just one circumflex is output if the start and current positions
+ indicates that callout number 0 occurred for a match attempt starting
+ at the fourth character of the subject string, when the pointer was at
+ the seventh character of the data, and when the next pattern item was
+ \d. Just one circumflex is output if the start and current positions
are the same.
Callouts numbered 255 are assumed to be automatic callouts, inserted as
- a result of the /C pattern modifier. In this case, instead of showing
- the callout number, the offset in the pattern, preceded by a plus, is
+ a result of the /C pattern modifier. In this case, instead of showing
+ the callout number, the offset in the pattern, preceded by a plus, is
output. For example:
re> /\d?[A-E]\*/C
+10 ^ ^
0: E*
- The callout function in pcretest returns zero (carry on matching) by
- default, but you can use a \C item in a data line (as described above)
+ The callout function in pcretest returns zero (carry on matching) by
+ default, but you can use a \C item in a data line (as described above)
to change this.
- Inserting callouts can be helpful when using pcretest to check compli-
- cated regular expressions. For further information about callouts, see
+ Inserting callouts can be helpful when using pcretest to check compli-
+ cated regular expressions. For further information about callouts, see
the pcrecallout documentation.
+NON-PRINTING CHARACTERS
+
+ When pcretest is outputting text in the compiled version of a pattern,
+ bytes other than 32-126 are always treated as non-printing characters
+ are are therefore shown as hex escapes.
+
+ When pcretest is outputting text that is a matched part of a subject
+ string, it behaves in the same way, unless a different locale has been
+ set for the pattern (using the /L modifier). In this case, the
+ isprint() function to distinguish printing and non-printing characters.
+
+
SAVING AND RELOADING COMPILED PATTERNS
- The facilities described in this section are not available when the
+ The facilities described in this section are not available when the
POSIX inteface to PCRE is being used, that is, when the /P pattern mod-
ifier is specified.
When the POSIX interface is not in use, you can cause pcretest to write
- a compiled pattern to a file, by following the modifiers with > and a
+ a compiled pattern to a file, by following the modifiers with > and a
file name. For example:
/pattern/im >/some/file
- See the pcreprecompile documentation for a discussion about saving and
+ See the pcreprecompile documentation for a discussion about saving and
re-using compiled patterns.
- The data that is written is binary. The first eight bytes are the
- length of the compiled pattern data followed by the length of the
- optional study data, each written as four bytes in big-endian order
- (most significant byte first). If there is no study data (either the
+ The data that is written is binary. The first eight bytes are the
+ length of the compiled pattern data followed by the length of the
+ optional study data, each written as four bytes in big-endian order
+ (most significant byte first). If there is no study data (either the
pattern was not studied, or studying did not return any data), the sec-
- ond length is zero. The lengths are followed by an exact copy of the
+ ond length is zero. The lengths are followed by an exact copy of the
compiled pattern. If there is additional study data, this follows imme-
- diately after the compiled pattern. After writing the file, pcretest
+ diately after the compiled pattern. After writing the file, pcretest
expects to read a new pattern.
A saved pattern can be reloaded into pcretest by specifing < and a file
- name instead of a pattern. The name of the file must not contain a <
- character, as otherwise pcretest will interpret the line as a pattern
+ name instead of a pattern. The name of the file must not contain a <
+ character, as otherwise pcretest will interpret the line as a pattern
delimited by < characters. For example:
re> </some/file
Compiled regex loaded from /some/file
No study data
- When the pattern has been loaded, pcretest proceeds to read data lines
+ When the pattern has been loaded, pcretest proceeds to read data lines
in the usual way.
- You can copy a file written by pcretest to a different host and reload
- it there, even if the new host has opposite endianness to the one on
- which the pattern was compiled. For example, you can compile on an i86
+ You can copy a file written by pcretest to a different host and reload
+ it there, even if the new host has opposite endianness to the one on
+ which the pattern was compiled. For example, you can compile on an i86
machine and run on a SPARC machine.
- File names for saving and reloading can be absolute or relative, but
- note that the shell facility of expanding a file name that starts with
+ File names for saving and reloading can be absolute or relative, but
+ note that the shell facility of expanding a file name that starts with
a tilde (~) is not available.
- The ability to save and reload files in pcretest is intended for test-
- ing and experimentation. It is not intended for production use because
- only a single pattern can be written to a file. Furthermore, there is
- no facility for supplying custom character tables for use with a
- reloaded pattern. If the original pattern was compiled with custom
- tables, an attempt to match a subject string using a reloaded pattern
- is likely to cause pcretest to crash. Finally, if you attempt to load
+ The ability to save and reload files in pcretest is intended for test-
+ ing and experimentation. It is not intended for production use because
+ only a single pattern can be written to a file. Furthermore, there is
+ no facility for supplying custom character tables for use with a
+ reloaded pattern. If the original pattern was compiled with custom
+ tables, an attempt to match a subject string using a reloaded pattern
+ is likely to cause pcretest to crash. Finally, if you attempt to load
a file that is not in the correct format, the result is undefined.
+SEE ALSO
+
+ pcre(3), pcreapi(3), pcrecallout(3), pcrematching(3), pcrepartial(d),
+ pcrepattern(3), pcreprecompile(3).
+
+
AUTHOR
Philip Hazel
- University Computing Service,
- Cambridge CB2 3QG, England.
+ University Computing Service
+ Cambridge CB2 3QH, England.
+
+
+REVISION
-Last updated: 29 June 2006
-Copyright (c) 1997-2006 University of Cambridge.
+ Last updated: 24 April 2007
+ Copyright (c) 1997-2007 University of Cambridge.
git://git.exim.org / exim.git / blobdiff