-/* $Cambridge: exim/src/src/expand.c,v 1.32 2005/06/20 11:20:41 ph10 Exp $ */
+/* $Cambridge: exim/src/src/expand.c,v 1.91 2007/10/04 13:23:05 tom Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2005 */
+/* Copyright (c) University of Cambridge 1995 - 2007 */
/* See the file NOTICE for conditions of use and distribution. */
#include "exim.h"
+/* Recursively called function */
+
+static uschar *expand_string_internal(uschar *, BOOL, uschar **, BOOL);
+
#ifdef STAND_ALONE
#ifndef SUPPORT_CRYPTEQ
#define SUPPORT_CRYPTEQ
#endif
#endif
+#ifdef LOOKUP_LDAP
+#include "lookups/ldap.h"
+#endif
+
#ifdef SUPPORT_CRYPTEQ
#ifdef CRYPT_H
#include <crypt.h>
#endif
#endif
-#ifdef LOOKUP_LDAP
-#include "lookups/ldap.h"
-#endif
-
-
-
-/* Recursively called function */
+/* The handling of crypt16() is a mess. I will record below the analysis of the
+mess that was sent to me. We decided, however, to make changing this very low
+priority, because in practice people are moving away from the crypt()
+algorithms nowadays, so it doesn't seem worth it.
+
+<quote>
+There is an algorithm named "crypt16" in Ultrix and Tru64. It crypts
+the first 8 characters of the password using a 20-round version of crypt
+(standard crypt does 25 rounds). It then crypts the next 8 characters,
+or an empty block if the password is less than 9 characters, using a
+20-round version of crypt and the same salt as was used for the first
+block. Charaters after the first 16 are ignored. It always generates
+a 16-byte hash, which is expressed together with the salt as a string
+of 24 base 64 digits. Here are some links to peruse:
+
+ http://cvs.pld.org.pl/pam/pamcrypt/crypt16.c?rev=1.2
+ http://seclists.org/bugtraq/1999/Mar/0076.html
+
+There's a different algorithm named "bigcrypt" in HP-UX, Digital Unix,
+and OSF/1. This is the same as the standard crypt if given a password
+of 8 characters or less. If given more, it first does the same as crypt
+using the first 8 characters, then crypts the next 8 (the 9th to 16th)
+using as salt the first two base 64 digits from the first hash block.
+If the password is more than 16 characters then it crypts the 17th to 24th
+characters using as salt the first two base 64 digits from the second hash
+block. And so on: I've seen references to it cutting off the password at
+40 characters (5 blocks), 80 (10 blocks), or 128 (16 blocks). Some links:
+
+ http://cvs.pld.org.pl/pam/pamcrypt/bigcrypt.c?rev=1.2
+ http://seclists.org/bugtraq/1999/Mar/0109.html
+ http://h30097.www3.hp.com/docs/base_doc/DOCUMENTATION/HTML/AA-Q0R2D-
+ TET1_html/sec.c222.html#no_id_208
+
+Exim has something it calls "crypt16". It will either use a native
+crypt16 or its own implementation. A native crypt16 will presumably
+be the one that I called "crypt16" above. The internal "crypt16"
+function, however, is a two-block-maximum implementation of what I called
+"bigcrypt". The documentation matches the internal code.
+
+I suspect that whoever did the "crypt16" stuff for Exim didn't realise
+that crypt16 and bigcrypt were different things.
+
+Exim uses the LDAP-style scheme identifier "{crypt16}" to refer
+to whatever it is using under that name. This unfortunately sets a
+precedent for using "{crypt16}" to identify two incompatible algorithms
+whose output can't be distinguished. With "{crypt16}" thus rendered
+ambiguous, I suggest you deprecate it and invent two new identifiers
+for the two algorithms.
+
+Both crypt16 and bigcrypt are very poor algorithms, btw. Hashing parts
+of the password separately means they can be cracked separately, so
+the double-length hash only doubles the cracking effort instead of
+squaring it. I recommend salted SHA-1 ({SSHA}), or the Blowfish-based
+bcrypt ({CRYPT}$2a$).
+</quote>
+*/
-static uschar *expand_string_internal(uschar *, BOOL, uschar **, BOOL);
static uschar *item_table[] = {
US"dlfunc",
US"extract",
+ US"filter",
US"hash",
US"hmac",
US"if",
US"length",
US"lookup",
+ US"map",
US"nhash",
US"perl",
US"prvs",
US"prvscheck",
US"readfile",
US"readsocket",
+ US"reduce",
US"run",
US"sg",
US"substr",
enum {
EITEM_DLFUNC,
EITEM_EXTRACT,
+ EITEM_FILTER,
EITEM_HASH,
EITEM_HMAC,
EITEM_IF,
EITEM_LENGTH,
EITEM_LOOKUP,
+ EITEM_MAP,
EITEM_NHASH,
EITEM_PERL,
EITEM_PRVS,
EITEM_PRVSCHECK,
EITEM_READFILE,
EITEM_READSOCK,
+ EITEM_REDUCE,
EITEM_RUN,
EITEM_SG,
EITEM_SUBSTR,
US"from_utf8",
US"local_part",
US"quote_local_part",
+ US"time_eval",
US"time_interval"};
enum {
EOP_FROM_UTF8,
EOP_LOCAL_PART,
EOP_QUOTE_LOCAL_PART,
+ EOP_TIME_EVAL,
EOP_TIME_INTERVAL };
static uschar *op_table_main[] = {
US"address",
+ US"addresses",
US"base62",
US"base62d",
US"domain",
US"nhash",
US"quote",
US"rfc2047",
+ US"rfc2047d",
US"rxquote",
US"s",
US"sha1",
enum {
EOP_ADDRESS = sizeof(op_table_underscore)/sizeof(uschar *),
+ EOP_ADDRESSES,
EOP_BASE62,
EOP_BASE62D,
EOP_DOMAIN,
EOP_NHASH,
EOP_QUOTE,
EOP_RFC2047,
+ EOP_RFC2047D,
EOP_RXQUOTE,
EOP_S,
EOP_SHA1,
US"eqi",
US"exists",
US"first_delivery",
+ US"forall",
+ US"forany",
US"ge",
US"gei",
US"gt",
US"match",
US"match_address",
US"match_domain",
+ US"match_ip",
US"match_local_part",
US"or",
US"pam",
ECOND_STR_EQI,
ECOND_EXISTS,
ECOND_FIRST_DELIVERY,
+ ECOND_FORALL,
+ ECOND_FORANY,
ECOND_STR_GE,
ECOND_STR_GEI,
ECOND_STR_GT,
ECOND_MATCH,
ECOND_MATCH_ADDRESS,
ECOND_MATCH_DOMAIN,
+ ECOND_MATCH_IP,
ECOND_MATCH_LOCAL_PART,
ECOND_OR,
ECOND_PAM,
vtype_stringptr, /* value is address of pointer to string */
vtype_msgbody, /* as stringptr, but read when first required */
vtype_msgbody_end, /* ditto, the end of the message */
- vtype_msgheaders, /* the message's headers */
+ vtype_msgheaders, /* the message's headers, processed */
+ vtype_msgheaders_raw, /* the message's headers, unprocessed */
vtype_localpart, /* extract local part from string */
vtype_domain, /* extract domain from string */
vtype_recipients, /* extract recipients from recipients list */
- /* (enabled only during system filtering */
+ /* (available only in system filters, ACLs, and */
+ /* local_scan()) */
vtype_todbsdin, /* value not used; generate BSD inbox tod */
vtype_tode, /* value not used; generate tod in epoch format */
vtype_todf, /* value not used; generate full tod */
/* This table must be kept in alphabetical order. */
static var_entry var_table[] = {
- { "acl_c0", vtype_stringptr, &acl_var[0] },
- { "acl_c1", vtype_stringptr, &acl_var[1] },
- { "acl_c2", vtype_stringptr, &acl_var[2] },
- { "acl_c3", vtype_stringptr, &acl_var[3] },
- { "acl_c4", vtype_stringptr, &acl_var[4] },
- { "acl_c5", vtype_stringptr, &acl_var[5] },
- { "acl_c6", vtype_stringptr, &acl_var[6] },
- { "acl_c7", vtype_stringptr, &acl_var[7] },
- { "acl_c8", vtype_stringptr, &acl_var[8] },
- { "acl_c9", vtype_stringptr, &acl_var[9] },
- { "acl_m0", vtype_stringptr, &acl_var[10] },
- { "acl_m1", vtype_stringptr, &acl_var[11] },
- { "acl_m2", vtype_stringptr, &acl_var[12] },
- { "acl_m3", vtype_stringptr, &acl_var[13] },
- { "acl_m4", vtype_stringptr, &acl_var[14] },
- { "acl_m5", vtype_stringptr, &acl_var[15] },
- { "acl_m6", vtype_stringptr, &acl_var[16] },
- { "acl_m7", vtype_stringptr, &acl_var[17] },
- { "acl_m8", vtype_stringptr, &acl_var[18] },
- { "acl_m9", vtype_stringptr, &acl_var[19] },
+ /* WARNING: Do not invent variables whose names start acl_c or acl_m because
+ they will be confused with user-creatable ACL variables. */
{ "acl_verify_message", vtype_stringptr, &acl_verify_message },
{ "address_data", vtype_stringptr, &deliver_address_data },
{ "address_file", vtype_stringptr, &address_file },
{ "dk_signsall", vtype_dk_verify, NULL },
{ "dk_status", vtype_dk_verify, NULL },
{ "dk_testing", vtype_dk_verify, NULL },
+#endif
+#ifdef EXPERIMENTAL_DKIM
+ { "dkim_domain", vtype_stringptr, &dkim_signing_domain },
+ { "dkim_selector", vtype_stringptr, &dkim_signing_selector },
#endif
{ "dnslist_domain", vtype_stringptr, &dnslist_domain },
+ { "dnslist_matched", vtype_stringptr, &dnslist_matched },
{ "dnslist_text", vtype_stringptr, &dnslist_text },
{ "dnslist_value", vtype_stringptr, &dnslist_value },
{ "domain", vtype_stringptr, &deliver_domain },
{ "inode", vtype_ino, &deliver_inode },
{ "interface_address", vtype_stringptr, &interface_address },
{ "interface_port", vtype_int, &interface_port },
+ { "item", vtype_stringptr, &iterate_item },
#ifdef LOOKUP_LDAP
{ "ldap_dn", vtype_stringptr, &eldap_dn },
#endif
#ifdef WITH_CONTENT_SCAN
{ "malware_name", vtype_stringptr, &malware_name },
#endif
+ { "max_received_linelength", vtype_int, &max_received_linelength },
{ "message_age", vtype_int, &message_age },
{ "message_body", vtype_msgbody, &message_body },
{ "message_body_end", vtype_msgbody_end, &message_body_end },
{ "message_body_size", vtype_int, &message_body_size },
+ { "message_exim_id", vtype_stringptr, &message_id },
{ "message_headers", vtype_msgheaders, NULL },
+ { "message_headers_raw", vtype_msgheaders_raw, NULL },
{ "message_id", vtype_stringptr, &message_id },
{ "message_linecount", vtype_int, &message_linecount },
{ "message_size", vtype_int, &message_size },
{ "rcpt_fail_count", vtype_int, &rcpt_fail_count },
{ "received_count", vtype_int, &received_count },
{ "received_for", vtype_stringptr, &received_for },
+ { "received_ip_address", vtype_stringptr, &interface_address },
+ { "received_port", vtype_int, &interface_port },
{ "received_protocol", vtype_stringptr, &received_protocol },
{ "received_time", vtype_int, &received_time },
{ "recipient_data", vtype_stringptr, &recipient_data },
{ "sender_rate_period", vtype_stringptr, &sender_rate_period },
{ "sender_rcvhost", vtype_stringptr, &sender_rcvhost },
{ "sender_verify_failure",vtype_stringptr, &sender_verify_failure },
+ { "sending_ip_address", vtype_stringptr, &sending_ip_address },
+ { "sending_port", vtype_int, &sending_port },
{ "smtp_active_hostname", vtype_stringptr, &smtp_active_hostname },
- { "smtp_command_argument", vtype_stringptr, &smtp_command_argument },
+ { "smtp_command", vtype_stringptr, &smtp_cmd_buffer },
+ { "smtp_command_argument", vtype_stringptr, &smtp_cmd_argument },
+ { "smtp_count_at_connection_start", vtype_int, &smtp_accept_count },
+ { "smtp_notquit_reason", vtype_stringptr, &smtp_notquit_reason },
{ "sn0", vtype_filter_int, &filter_sn[0] },
{ "sn1", vtype_filter_int, &filter_sn[1] },
{ "sn2", vtype_filter_int, &filter_sn[2] },
newsize return the size of memory block that was obtained; may be NULL
if exists_only is TRUE
want_raw TRUE if called for $rh_ or $rheader_ variables; no processing,
- other than concatenating, will be done on the header
+ other than concatenating, will be done on the header. Also used
+ for $message_headers_raw.
charset name of charset to translate MIME words to; used only if
want_raw is false; if NULL, no translation is done (this is
used for $bh_ and $bheader_)
while (isspace(*t)) t++; /* remove leading white space */
ilen = h->slen - (t - h->text); /* length to insert */
+ /* Unless wanted raw, remove trailing whitespace, including the
+ newline. */
+
+ if (!want_raw)
+ while (ilen > 0 && isspace(t[ilen-1])) ilen--;
+
/* Set comma = 1 if handling a single header and it's one of those
that contains an address list, except when asked for raw headers. Only
need to do this once. */
/* First pass - compute total store needed; second pass - compute
total store used, including this header. */
- size += ilen + comma;
+ size += ilen + comma + 1; /* +1 for the newline */
/* Second pass - concatentate the data, up to a maximum. Note that
the loop stops when size hits the limit. */
{
if (size > header_insert_maxlen)
{
- ilen -= size - header_insert_maxlen;
+ ilen -= size - header_insert_maxlen - 1;
comma = 0;
}
Ustrncpy(ptr, t, ilen);
ptr += ilen;
- if (comma != 0 && ilen > 0)
+
+ /* For a non-raw header, put in the comma if needed, then add
+ back the newline we removed above, provided there was some text in
+ the header. */
+
+ if (!want_raw && ilen > 0)
{
- ptr[-1] = ',';
+ if (comma != 0) *ptr++ = ',';
*ptr++ = '\n';
}
}
}
}
- /* At end of first pass, truncate size if necessary, and get the buffer
- to hold the data, returning the buffer size. */
+ /* At end of first pass, return NULL if no header found. Then truncate size
+ if necessary, and get the buffer to hold the data, returning the buffer size.
+ */
if (i == 0)
{
}
}
-/* Remove a redundant added comma if present */
-
-if (comma != 0 && ptr > yield) ptr -= 2;
-
/* That's all we do for raw header expansion. */
if (want_raw)
*ptr = 0;
}
-/* Otherwise, we remove trailing whitespace, including newlines. Then we do RFC
-2047 decoding, translating the charset if requested. The rfc2047_decode2()
+/* Otherwise, remove a final newline and a redundant added comma. Then we do
+RFC 2047 decoding, translating the charset if requested. The rfc2047_decode2()
function can return an error with decoded data if the charset translation
fails. If decoding fails, it returns NULL. */
else
{
uschar *decoded, *error;
- while (ptr > yield && isspace(ptr[-1])) ptr--;
+ if (ptr > yield && ptr[-1] == '\n') ptr--;
+ if (ptr > yield && comma != 0 && ptr[-1] == ',') ptr--;
*ptr = 0;
- decoded = rfc2047_decode2(yield, TRUE, charset, '?', NULL, newsize, &error);
+ decoded = rfc2047_decode2(yield, check_rfc2047_length, charset, '?', NULL,
+ newsize, &error);
if (error != NULL)
{
DEBUG(D_any) debug_printf("*** error in RFC 2047 decoding: %s\n"
int first = 0;
int last = var_table_size;
+/* Handle ACL variables, whose names are of the form acl_cxxx or acl_mxxx.
+Originally, xxx had to be a number in the range 0-9 (later 0-19), but from
+release 4.64 onwards arbitrary names are permitted, as long as the first 5
+characters are acl_c or acl_m and the sixth is either a digit or an underscore
+(this gave backwards compatibility at the changeover). There may be built-in
+variables whose names start acl_ but they should never start in this way. This
+slightly messy specification is a consequence of the history, needless to say.
+
+If an ACL variable does not exist, treat it as empty, unless strict_acl_vars is
+set, in which case give an error. */
+
+if ((Ustrncmp(name, "acl_c", 5) == 0 || Ustrncmp(name, "acl_m", 5) == 0) &&
+ !isalpha(name[5]))
+ {
+ tree_node *node =
+ tree_search((name[4] == 'c')? acl_var_c : acl_var_m, name + 4);
+ return (node == NULL)? (strict_acl_vars? NULL : US"") : node->data.ptr;
+ }
+
+/* Handle $auth<n> variables. */
+
+if (Ustrncmp(name, "auth", 4) == 0)
+ {
+ uschar *endptr;
+ int n = Ustrtoul(name + 4, &endptr, 10);
+ if (*endptr == 0 && n != 0 && n <= AUTH_VARS)
+ return (auth_vars[n-1] == NULL)? US"" : auth_vars[n-1];
+ }
+
+/* For all other variables, search the table */
+
while (last > first)
{
uschar *s, *domain;
if (c < 0) { last = middle; continue; }
/* Found an existing variable. If in skipping state, the value isn't needed,
- and we want to avoid processing (such as looking up up the host name). */
+ and we want to avoid processing (such as looking up the host name). */
if (skipping) return US"";
switch (var_table[middle].type)
{
- case vtype_filter_int:
- if (!filter_running) return NULL;
- /* Fall through */
-
#ifdef EXPERIMENTAL_DOMAINKEYS
case vtype_dk_verify:
return (s == NULL)? US"" : s;
#endif
+ case vtype_filter_int:
+ if (!filter_running) return NULL;
+ /* Fall through */
+ /* VVVVVVVVVVVV */
case vtype_int:
sprintf(CS var_buffer, "%d", *(int *)(var_table[middle].value)); /* Integer */
return var_buffer;
return var_buffer;
case vtype_load_avg:
- sprintf(CS var_buffer, "%d", os_getloadavg()); /* load_average */
+ sprintf(CS var_buffer, "%d", OS_GETLOADAVG()); /* load_average */
return var_buffer;
case vtype_host_lookup: /* Lookup if not done so */
case vtype_msgheaders:
return find_header(NULL, exists_only, newsize, FALSE, NULL);
+ case vtype_msgheaders_raw:
+ return find_header(NULL, exists_only, newsize, TRUE, NULL);
+
case vtype_msgbody: /* Pointer to msgbody string */
case vtype_msgbody_end: /* Ditto, the end of the msg */
ss = (uschar **)(var_table[middle].value);
if (len > 0)
{
body[len] = 0;
- while (len > 0)
+ if (message_body_newlines) /* Separate loops for efficiency */
{
- if (body[--len] == '\n' || body[len] == 0) body[len] = ' ';
+ while (len > 0)
+ { if (body[--len] == 0) body[len] = ' '; }
+ }
+ else
+ {
+ while (len > 0)
+ { if (body[--len] == '\n' || body[len] == 0) body[len] = ' '; }
}
}
}
return tod_stamp(tod_log_datestamp);
case vtype_reply: /* Get reply address */
- s = find_header(US"reply-to:", exists_only, newsize, FALSE,
+ s = find_header(US"reply-to:", exists_only, newsize, TRUE,
headers_charset);
+ if (s != NULL) while (isspace(*s)) s++;
if (s == NULL || *s == 0)
- s = find_header(US"from:", exists_only, newsize, FALSE, headers_charset);
+ {
+ *newsize = 0; /* For the *s==0 case */
+ s = find_header(US"from:", exists_only, newsize, TRUE, headers_charset);
+ }
+ if (s != NULL)
+ {
+ uschar *t;
+ while (isspace(*s)) s++;
+ for (t = s; *t != 0; t++) if (*t == '\n') *t = ' ';
+ while (t > s && isspace(t[-1])) t--;
+ *t = 0;
+ }
return (s == NULL)? US"" : s;
/* A recipients list is available only during system message filtering,
+/*************************************************
+* Elaborate message for bad variable *
+*************************************************/
+
+/* For the "unknown variable" message, take a look at the variable's name, and
+give additional information about possible ACL variables. The extra information
+is added on to expand_string_message.
+
+Argument: the name of the variable
+Returns: nothing
+*/
+
+static void
+check_variable_error_message(uschar *name)
+{
+if (Ustrncmp(name, "acl_", 4) == 0)
+ expand_string_message = string_sprintf("%s (%s)", expand_string_message,
+ (name[4] == 'c' || name[4] == 'm')?
+ (isalpha(name[5])?
+ US"6th character of a user-defined ACL variable must be a digit or underscore" :
+ US"strict_acl_vars is set" /* Syntax is OK, it has to be this */
+ ) :
+ US"user-defined ACL variables must start acl_c or acl_m");
+}
+
+
+
/*************************************************
* Read and evaluate a condition *
*************************************************/
s = read_name(name, 256, s+1, US"_");
- /* Test for a header's existence */
+ /* Test for a header's existence. If the name contains a closing brace
+ character, this may be a user error where the terminating colon has been
+ omitted. Set a flag to adjust a subsequent error message in this case. */
if (Ustrncmp(name, "h_", 2) == 0 ||
Ustrncmp(name, "rh_", 3) == 0 ||
Ustrncmp(name, "bheader_", 8) == 0)
{
s = read_header_name(name, 256, s);
+ if (Ustrchr(name, '}') != NULL) malformed_header = TRUE;
if (yield != NULL) *yield =
(find_header(name, TRUE, NULL, FALSE, NULL) != NULL) == testfor;
}
expand_string_message = (name[0] == 0)?
string_sprintf("variable name omitted after \"def:\"") :
string_sprintf("unknown variable \"%s\" after \"def:\"", name);
+ check_variable_error_message(name);
return NULL;
}
if (yield != NULL) *yield = (value[0] != 0) == testfor;
case ECOND_ISIP4:
case ECOND_ISIP6:
rc = string_is_ip_address(sub[0], NULL);
- *yield = ((cond_type == ECOND_ISIP)? (rc > 0) :
+ *yield = ((cond_type == ECOND_ISIP)? (rc != 0) :
(cond_type == ECOND_ISIP4)? (rc == 4) : (rc == 6)) == testfor;
break;
variables if it succeeds
match_address: matches in an address list
match_domain: matches in a domain list
+ match_ip: matches a host list that is restricted to IP addresses
match_local_part: matches in a local part list
crypteq: encrypts plaintext and compares against an encrypted text,
using crypt(), crypt16(), MD5 or SHA-1
case ECOND_MATCH:
case ECOND_MATCH_ADDRESS:
case ECOND_MATCH_DOMAIN:
+ case ECOND_MATCH_IP:
case ECOND_MATCH_LOCAL_PART:
case ECOND_CRYPTEQ:
conditions that compare numbers do not start with a letter. This just saves
checking for them individually. */
- if (!isalpha(name[0]))
+ if (!isalpha(name[0]) && yield != NULL)
{
- uschar *endptr;
- num[i] = (int)Ustrtol((const uschar *)sub[i], &endptr, 10);
- if (tolower(*endptr) == 'k')
- {
- num[i] *= 1024;
- endptr++;
- }
- else if (tolower(*endptr) == 'm')
+ if (sub[i][0] == 0)
{
- num[i] *= 1024*1024;
- endptr++;
+ num[i] = 0;
+ DEBUG(D_expand)
+ debug_printf("empty string cast to zero for numerical comparison\n");
}
- while (isspace(*endptr)) endptr++;
- if (*endptr != 0)
+ else
{
- expand_string_message = string_sprintf("\"%s\" is not a number",
- sub[i]);
- return NULL;
+ num[i] = expand_string_integer(sub[i], FALSE);
+ if (expand_string_message != NULL) return NULL;
}
}
}
MCL_DOMAIN + MCL_NOEXPAND, TRUE, NULL);
goto MATCHED_SOMETHING;
+ case ECOND_MATCH_IP: /* Match IP address in a host list */
+ if (sub[0][0] != 0 && string_is_ip_address(sub[0], NULL) == 0)
+ {
+ expand_string_message = string_sprintf("\"%s\" is not an IP address",
+ sub[0]);
+ return NULL;
+ }
+ else
+ {
+ unsigned int *nullcache = NULL;
+ check_host_block cb;
+
+ cb.host_name = US"";
+ cb.host_address = sub[0];
+
+ /* If the host address starts off ::ffff: it is an IPv6 address in
+ IPv4-compatible mode. Find the IPv4 part for checking against IPv4
+ addresses. */
+
+ cb.host_ipv4 = (Ustrncmp(cb.host_address, "::ffff:", 7) == 0)?
+ cb.host_address + 7 : cb.host_address;
+
+ rc = match_check_list(
+ &sub[1], /* the list */
+ 0, /* separator character */
+ &hostlist_anchor, /* anchor pointer */
+ &nullcache, /* cache pointer */
+ check_host, /* function for testing */
+ &cb, /* argument for function */
+ MCL_HOST, /* type of check */
+ sub[0], /* text for debugging */
+ NULL); /* where to pass back data */
+ }
+ goto MATCHED_SOMETHING;
+
case ECOND_MATCH_LOCAL_PART:
rc = match_isinlist(sub[0], &(sub[1]), 0, &localpartlist_anchor, NULL,
MCL_LOCALPART + MCL_NOEXPAND, TRUE, NULL);
/* Fall through */
-
+ /* VVVVVVVVVVVV */
MATCHED_SOMETHING:
switch(rc)
{
return ++s;
+ /* forall/forany: iterates a condition with different values */
+
+ case ECOND_FORALL:
+ case ECOND_FORANY:
+ {
+ int sep = 0;
+ uschar *save_iterate_item = iterate_item;
+
+ while (isspace(*s)) s++;
+ if (*s++ != '{') goto COND_FAILED_CURLY_START;
+ sub[0] = expand_string_internal(s, TRUE, &s, (yield == NULL));
+ if (sub[0] == NULL) return NULL;
+ if (*s++ != '}') goto COND_FAILED_CURLY_END;
+
+ while (isspace(*s)) s++;
+ if (*s++ != '{') goto COND_FAILED_CURLY_START;
+
+ sub[1] = s;
+
+ /* Call eval_condition once, with result discarded (as if scanning a
+ "false" part). This allows us to find the end of the condition, because if
+ the list it empty, we won't actually evaluate the condition for real. */
+
+ s = eval_condition(sub[1], NULL);
+ if (s == NULL)
+ {
+ expand_string_message = string_sprintf("%s inside \"%s\" condition",
+ expand_string_message, name);
+ return NULL;
+ }
+ while (isspace(*s)) s++;
+
+ if (*s++ != '}')
+ {
+ expand_string_message = string_sprintf("missing } at end of condition "
+ "inside \"%s\"", name);
+ return NULL;
+ }
+
+ if (yield != NULL) *yield = !testfor;
+ while ((iterate_item = string_nextinlist(&sub[0], &sep, NULL, 0)) != NULL)
+ {
+ DEBUG(D_expand) debug_printf("%s: $item = \"%s\"\n", name, iterate_item);
+ if (eval_condition(sub[1], &tempcond) == NULL)
+ {
+ expand_string_message = string_sprintf("%s inside \"%s\" condition",
+ expand_string_message, name);
+ iterate_item = save_iterate_item;
+ return NULL;
+ }
+ DEBUG(D_expand) debug_printf("%s: condition evaluated to %s\n", name,
+ tempcond? "true":"false");
+
+ if (yield != NULL) *yield = (tempcond == testfor);
+ if (tempcond == (cond_type == ECOND_FORANY)) break;
+ }
+
+ iterate_item = save_iterate_item;
+ return s;
+ }
+
+
/* Unknown condition */
default:
static uschar *
prvs_daystamp(int day_offset)
{
-uschar *days = store_get(16);
-(void)string_format(days, 16, TIME_T_FMT,
+uschar *days = store_get(32); /* Need at least 24 for cases */
+(void)string_format(days, 32, TIME_T_FMT, /* where TIME_T_FMT is %lld */
(time(NULL) + day_offset*86400)/86400);
return (Ustrlen(days) >= 3) ? &days[Ustrlen(days)-3] : US"100";
}
* Evaluate numeric expression *
*************************************************/
-/* This is a set of mutually recursive functions that evaluate a simple
-arithmetic expression involving only + - * / and parentheses. The only one that
-is called from elsewhere is eval_expr, whose interface is:
+/* This is a set of mutually recursive functions that evaluate an arithmetic
+expression involving + - * / % & | ^ ~ << >> and parentheses. The only one of
+these functions that is called from elsewhere is eval_expr, whose interface is:
Arguments:
- sptr pointer to the pointer to the string - gets updated
- decimal TRUE if numbers are to be assumed decimal
- error pointer to where to put an error message - must be NULL on input
- endket TRUE if ')' must terminate - FALSE for external call
-
+ sptr pointer to the pointer to the string - gets updated
+ decimal TRUE if numbers are to be assumed decimal
+ error pointer to where to put an error message - must be NULL on input
+ endket TRUE if ')' must terminate - FALSE for external call
-Returns: on success: the value of the expression, with *error still NULL
- on failure: an undefined value, with *error = a message
+Returns: on success: the value of the expression, with *error still NULL
+ on failure: an undefined value, with *error = a message
*/
-static int eval_sumterm(uschar **, BOOL, uschar **);
+static int eval_op_or(uschar **, BOOL, uschar **);
+
static int
eval_expr(uschar **sptr, BOOL decimal, uschar **error, BOOL endket)
{
uschar *s = *sptr;
-int x = eval_sumterm(&s, decimal, error);
+int x = eval_op_or(&s, decimal, error);
if (*error == NULL)
{
- while (*s == '+' || *s == '-')
- {
- int op = *s++;
- int y = eval_sumterm(&s, decimal, error);
- if (*error != NULL) break;
- if (op == '+') x += y; else x -= y;
- }
- if (*error == NULL)
+ if (endket)
{
- if (endket)
- {
- if (*s != ')')
- *error = US"expecting closing parenthesis";
- else
- while (isspace(*(++s)));
- }
- else if (*s != 0) *error = US"expecting + or -";
+ if (*s != ')')
+ *error = US"expecting closing parenthesis";
+ else
+ while (isspace(*(++s)));
}
+ else if (*s != 0) *error = US"expecting operator";
}
-
*sptr = s;
return x;
}
+
static int
-eval_term(uschar **sptr, BOOL decimal, uschar **error)
+eval_number(uschar **sptr, BOOL decimal, uschar **error)
{
register int c;
int n;
uschar *s = *sptr;
while (isspace(*s)) s++;
c = *s;
-if (isdigit(c) || ((c == '-' || c == '+') && isdigit(s[1])))
+if (isdigit(c))
{
int count;
(void)sscanf(CS s, (decimal? "%d%n" : "%i%n"), &n, &count);
return n;
}
-static int eval_sumterm(uschar **sptr, BOOL decimal, uschar **error)
+
+static int eval_op_unary(uschar **sptr, BOOL decimal, uschar **error)
{
uschar *s = *sptr;
-int x = eval_term(&s, decimal, error);
+int x;
+while (isspace(*s)) s++;
+if (*s == '+' || *s == '-' || *s == '~')
+ {
+ int op = *s++;
+ x = eval_op_unary(&s, decimal, error);
+ if (op == '-') x = -x;
+ else if (op == '~') x = ~x;
+ }
+else
+ {
+ x = eval_number(&s, decimal, error);
+ }
+*sptr = s;
+return x;
+}
+
+
+static int eval_op_mult(uschar **sptr, BOOL decimal, uschar **error)
+{
+uschar *s = *sptr;
+int x = eval_op_unary(&s, decimal, error);
if (*error == NULL)
{
- while (*s == '*' || *s == '/')
+ while (*s == '*' || *s == '/' || *s == '%')
{
int op = *s++;
- int y = eval_term(&s, decimal, error);
+ int y = eval_op_unary(&s, decimal, error);
+ if (*error != NULL) break;
+ if (op == '*') x *= y;
+ else if (op == '/') x /= y;
+ else x %= y;
+ }
+ }
+*sptr = s;
+return x;
+}
+
+
+static int eval_op_sum(uschar **sptr, BOOL decimal, uschar **error)
+{
+uschar *s = *sptr;
+int x = eval_op_mult(&s, decimal, error);
+if (*error == NULL)
+ {
+ while (*s == '+' || *s == '-')
+ {
+ int op = *s++;
+ int y = eval_op_mult(&s, decimal, error);
+ if (*error != NULL) break;
+ if (op == '+') x += y; else x -= y;
+ }
+ }
+*sptr = s;
+return x;
+}
+
+
+static int eval_op_shift(uschar **sptr, BOOL decimal, uschar **error)
+{
+uschar *s = *sptr;
+int x = eval_op_sum(&s, decimal, error);
+if (*error == NULL)
+ {
+ while ((*s == '<' || *s == '>') && s[1] == s[0])
+ {
+ int y;
+ int op = *s++;
+ s++;
+ y = eval_op_sum(&s, decimal, error);
+ if (*error != NULL) break;
+ if (op == '<') x <<= y; else x >>= y;
+ }
+ }
+*sptr = s;
+return x;
+}
+
+
+static int eval_op_and(uschar **sptr, BOOL decimal, uschar **error)
+{
+uschar *s = *sptr;
+int x = eval_op_shift(&s, decimal, error);
+if (*error == NULL)
+ {
+ while (*s == '&')
+ {
+ int y;
+ s++;
+ y = eval_op_shift(&s, decimal, error);
if (*error != NULL) break;
- if (op == '*') x *= y; else x /= y;
+ x &= y;
}
}
*sptr = s;
}
+static int eval_op_xor(uschar **sptr, BOOL decimal, uschar **error)
+{
+uschar *s = *sptr;
+int x = eval_op_and(&s, decimal, error);
+if (*error == NULL)
+ {
+ while (*s == '^')
+ {
+ int y;
+ s++;
+ y = eval_op_and(&s, decimal, error);
+ if (*error != NULL) break;
+ x ^= y;
+ }
+ }
+*sptr = s;
+return x;
+}
+
+
+static int eval_op_or(uschar **sptr, BOOL decimal, uschar **error)
+{
+uschar *s = *sptr;
+int x = eval_op_xor(&s, decimal, error);
+if (*error == NULL)
+ {
+ while (*s == '|')
+ {
+ int y;
+ s++;
+ y = eval_op_xor(&s, decimal, error);
+ if (*error != NULL) break;
+ x |= y;
+ }
+ }
+*sptr = s;
+return x;
+}
+
/*************************************************
value = find_header(name, FALSE, &newsize, want_raw, charset);
/* If we didn't find the header, and the header contains a closing brace
- characters, this may be a user error where the terminating colon
+ character, this may be a user error where the terminating colon
has been omitted. Set a flag to adjust the error message in this case.
But there is no error here - nothing gets inserted. */
{
expand_string_message =
string_sprintf("unknown variable name \"%s\"", name);
+ check_variable_error_message(name);
goto EXPAND_FAILED;
}
}
/* Check that a key was provided for those lookup types that need it,
and was not supplied for those that use the query style. */
- if (!mac_islookup(stype, lookup_querystyle))
+ if (!mac_islookup(stype, lookup_querystyle|lookup_absfilequery))
{
if (key == NULL)
{
}
/* Get the next string in brackets and expand it. It is the file name for
- single-key+file lookups, and the whole query otherwise. */
+ single-key+file lookups, and the whole query otherwise. In the case of
+ queries that also require a file name (e.g. sqlite), the file name comes
+ first. */
if (*s != '{') goto EXPAND_FAILED_CURLY;
filename = expand_string_internal(s+1, TRUE, &s, skipping);
while (isspace(*s)) s++;
/* If this isn't a single-key+file lookup, re-arrange the variables
- to be appropriate for the search_ functions. */
+ to be appropriate for the search_ functions. For query-style lookups,
+ there is just a "key", and no file name. For the special query-style +
+ file types, the query (i.e. "key") starts with a file name. */
if (key == NULL)
{
+ while (isspace(*filename)) filename++;
key = filename;
- filename = NULL;
+
+ if (mac_islookup(stype, lookup_querystyle))
+ {
+ filename = NULL;
+ }
+ else
+ {
+ if (*filename != '/')
+ {
+ expand_string_message = string_sprintf(
+ "absolute file name expected for \"%s\" lookup", name);
+ goto EXPAND_FAILED;
+ }
+ while (*key != 0 && !isspace(*key)) key++;
+ if (*key != 0) *key++ = 0;
+ }
}
/* If skipping, don't do the next bit - just lookup_value == NULL, as if
domain = Ustrrchr(sub_arg[0],'@');
if ( (domain == NULL) || (domain == sub_arg[0]) || (Ustrlen(domain) == 1) )
{
- expand_string_message = US"first parameter must be a qualified email address";
+ expand_string_message = US"prvs first argument must be a qualified email address";
+ goto EXPAND_FAILED;
+ }
+
+ /* Calculate the hash. The second argument must be a single-digit
+ key number, or unset. */
+
+ if (sub_arg[2] != NULL &&
+ (!isdigit(sub_arg[2][0]) || sub_arg[2][1] != 0))
+ {
+ expand_string_message = US"prvs second argument must be a single digit";
goto EXPAND_FAILED;
}
- /* Calculate the hash */
p = prvs_hmac_sha1(sub_arg[0],sub_arg[1],sub_arg[2],prvs_daystamp(7));
if (p == NULL)
{
- expand_string_message = US"hmac-sha1 conversion failed";
+ expand_string_message = US"prvs hmac-sha1 conversion failed";
goto EXPAND_FAILED;
}
*domain++ = '\0';
yield = string_cat(yield,&size,&ptr,US"prvs=",5);
- string_cat(yield,&size,&ptr,sub_arg[0],Ustrlen(sub_arg[0]));
- string_cat(yield,&size,&ptr,US"/",1);
string_cat(yield,&size,&ptr,(sub_arg[2] != NULL) ? sub_arg[2] : US"0", 1);
string_cat(yield,&size,&ptr,prvs_daystamp(7),3);
string_cat(yield,&size,&ptr,p,6);
+ string_cat(yield,&size,&ptr,US"=",1);
+ string_cat(yield,&size,&ptr,sub_arg[0],Ustrlen(sub_arg[0]));
string_cat(yield,&size,&ptr,US"@",1);
string_cat(yield,&size,&ptr,domain,Ustrlen(domain));
int mysize = 0, myptr = 0;
const pcre *re;
uschar *p;
- /* Ugliness: We want to expand parameter 1 first, then set
+
+ /* TF: Ugliness: We want to expand parameter 1 first, then set
up expansion variables that are used in the expansion of
parameter 2. So we clone the string for the first
- expansion, where we only expand paramter 1. */
- uschar *s_backup = string_copy(s);
+ expansion, where we only expand parameter 1.
+
+ PH: Actually, that isn't necessary. The read_subs() function is
+ designed to work this way for the ${if and ${lookup expansions. I've
+ tidied the code.
+ */
/* Reset expansion variables */
prvscheck_result = NULL;
prvscheck_address = NULL;
prvscheck_keynum = NULL;
- switch(read_subs(sub_arg, 1, 1, &s_backup, skipping, FALSE, US"prvs"))
+ switch(read_subs(sub_arg, 1, 1, &s, skipping, FALSE, US"prvs"))
{
case 1: goto EXPAND_FAILED_CURLY;
case 2:
case 3: goto EXPAND_FAILED;
}
- re = regex_must_compile(US"^prvs\\=(.+)\\/([0-9])([0-9]{3})([A-F0-9]{6})\\@(.+)$",
+ re = regex_must_compile(US"^prvs\\=([0-9])([0-9]{3})([A-F0-9]{6})\\=(.+)\\@(.+)$",
TRUE,FALSE);
- if (regex_match_and_setup(re,sub_arg[0],0,-1)) {
- uschar *local_part = string_copyn(expand_nstring[1],expand_nlength[1]);
- uschar *key_num = string_copyn(expand_nstring[2],expand_nlength[2]);
- uschar *daystamp = string_copyn(expand_nstring[3],expand_nlength[3]);
- uschar *hash = string_copyn(expand_nstring[4],expand_nlength[4]);
+ if (regex_match_and_setup(re,sub_arg[0],0,-1))
+ {
+ uschar *local_part = string_copyn(expand_nstring[4],expand_nlength[4]);
+ uschar *key_num = string_copyn(expand_nstring[1],expand_nlength[1]);
+ uschar *daystamp = string_copyn(expand_nstring[2],expand_nlength[2]);
+ uschar *hash = string_copyn(expand_nstring[3],expand_nlength[3]);
uschar *domain = string_copyn(expand_nstring[5],expand_nlength[5]);
DEBUG(D_expand) debug_printf("prvscheck localpart: %s\n", local_part);
prvscheck_address[myptr] = '\0';
prvscheck_keynum = string_copy(key_num);
- /* Now re-expand all arguments in the usual manner */
- switch(read_subs(sub_arg, 3, 3, &s, skipping, TRUE, US"prvs"))
+ /* Now expand the second argument */
+ switch(read_subs(sub_arg, 1, 1, &s, skipping, FALSE, US"prvs"))
{
case 1: goto EXPAND_FAILED_CURLY;
case 2:
case 3: goto EXPAND_FAILED;
}
- if (*sub_arg[2] == '\0')
- yield = string_cat(yield,&size,&ptr,prvscheck_address,Ustrlen(prvscheck_address));
- else
- yield = string_cat(yield,&size,&ptr,sub_arg[2],Ustrlen(sub_arg[2]));
-
/* Now we have the key and can check the address. */
- p = prvs_hmac_sha1(prvscheck_address, sub_arg[1], prvscheck_keynum, daystamp);
+
+ p = prvs_hmac_sha1(prvscheck_address, sub_arg[0], prvscheck_keynum,
+ daystamp);
+
if (p == NULL)
{
expand_string_message = US"hmac-sha1 conversion failed";
DEBUG(D_expand) debug_printf("prvscheck: received hash is %s\n", hash);
DEBUG(D_expand) debug_printf("prvscheck: own hash is %s\n", p);
+
if (Ustrcmp(p,hash) == 0)
{
/* Success, valid BATV address. Now check the expiry date. */
uschar *now = prvs_daystamp(0);
unsigned int inow = 0,iexpire = 1;
- sscanf(CS now,"%u",&inow);
- sscanf(CS daystamp,"%u",&iexpire);
+ (void)sscanf(CS now,"%u",&inow);
+ (void)sscanf(CS daystamp,"%u",&iexpire);
/* When "iexpire" is < 7, a "flip" has occured.
Adjust "inow" accordingly. */
prvscheck_result = NULL;
DEBUG(D_expand) debug_printf("prvscheck: hash failure, $pvrs_result unset\n");
}
- }
+
+ /* Now expand the final argument. We leave this till now so that
+ it can include $prvscheck_result. */
+
+ switch(read_subs(sub_arg, 1, 0, &s, skipping, TRUE, US"prvs"))
+ {
+ case 1: goto EXPAND_FAILED_CURLY;
+ case 2:
+ case 3: goto EXPAND_FAILED;
+ }
+
+ if (sub_arg[0] == NULL || *sub_arg[0] == '\0')
+ yield = string_cat(yield,&size,&ptr,prvscheck_address,Ustrlen(prvscheck_address));
+ else
+ yield = string_cat(yield,&size,&ptr,sub_arg[0],Ustrlen(sub_arg[0]));
+
+ /* Reset the "internal" variables afterwards, because they are in
+ dynamic store that will be reclaimed if the expansion succeeded. */
+
+ prvscheck_address = NULL;
+ prvscheck_keynum = NULL;
+ }
else
{
/* Does not look like a prvs encoded address, return the empty string.
- We need to make sure all subs are expanded first. */
- switch(read_subs(sub_arg, 3, 3, &s, skipping, TRUE, US"prvs"))
+ We need to make sure all subs are expanded first, so as to skip over
+ the entire item. */
+
+ switch(read_subs(sub_arg, 2, 1, &s, skipping, TRUE, US"prvs"))
{
case 1: goto EXPAND_FAILED_CURLY;
case 2:
}
yield = cat_file(f, yield, &size, &ptr, sub_arg[1]);
- fclose(f);
+ (void)fclose(f);
continue;
}
}
else sub_arg[3] = NULL; /* No eol if no timeout */
- /* If skipping, we don't actually do anything */
+ /* If skipping, we don't actually do anything. Otherwise, arrange to
+ connect to either an IP or a Unix socket. */
if (!skipping)
{
- /* Make a connection to the socket */
+ /* Handle an IP (internet) domain */
- if ((fd = socket(PF_UNIX, SOCK_STREAM, 0)) == -1)
+ if (Ustrncmp(sub_arg[0], "inet:", 5) == 0)
{
- expand_string_message = string_sprintf("failed to create socket: %s",
- strerror(errno));
- goto SOCK_FAIL;
+ BOOL connected = FALSE;
+ int namelen, port;
+ host_item shost;
+ host_item *h;
+ uschar *server_name = sub_arg[0] + 5;
+ uschar *port_name = Ustrrchr(server_name, ':');
+
+ /* Sort out the port */
+
+ if (port_name == NULL)
+ {
+ expand_string_message =
+ string_sprintf("missing port for readsocket %s", sub_arg[0]);
+ goto EXPAND_FAILED;
+ }
+ *port_name++ = 0; /* Terminate server name */
+
+ if (isdigit(*port_name))
+ {
+ uschar *end;
+ port = Ustrtol(port_name, &end, 0);
+ if (end != port_name + Ustrlen(port_name))
+ {
+ expand_string_message =
+ string_sprintf("invalid port number %s", port_name);
+ goto EXPAND_FAILED;
+ }
+ }
+ else
+ {
+ struct servent *service_info = getservbyname(CS port_name, "tcp");
+ if (service_info == NULL)
+ {
+ expand_string_message = string_sprintf("unknown port \"%s\"",
+ port_name);
+ goto EXPAND_FAILED;
+ }
+ port = ntohs(service_info->s_port);
+ }
+
+ /* Sort out the server. */
+
+ shost.next = NULL;
+ shost.address = NULL;
+ shost.port = port;
+ shost.mx = -1;
+
+ namelen = Ustrlen(server_name);
+
+ /* Anything enclosed in [] must be an IP address. */
+
+ if (server_name[0] == '[' &&
+ server_name[namelen - 1] == ']')
+ {
+ server_name[namelen - 1] = 0;
+ server_name++;
+ if (string_is_ip_address(server_name, NULL) == 0)
+ {
+ expand_string_message =
+ string_sprintf("malformed IP address \"%s\"", server_name);
+ goto EXPAND_FAILED;
+ }
+ shost.name = shost.address = server_name;
+ }
+
+ /* Otherwise check for an unadorned IP address */
+
+ else if (string_is_ip_address(server_name, NULL) != 0)
+ shost.name = shost.address = server_name;
+
+ /* Otherwise lookup IP address(es) from the name */
+
+ else
+ {
+ shost.name = server_name;
+ if (host_find_byname(&shost, NULL, HOST_FIND_QUALIFY_SINGLE, NULL,
+ FALSE) != HOST_FOUND)
+ {
+ expand_string_message =
+ string_sprintf("no IP address found for host %s", shost.name);
+ goto EXPAND_FAILED;
+ }
+ }
+
+ /* Try to connect to the server - test each IP till one works */
+
+ for (h = &shost; h != NULL; h = h->next)
+ {
+ int af = (Ustrchr(h->address, ':') != 0)? AF_INET6 : AF_INET;
+ if ((fd = ip_socket(SOCK_STREAM, af)) == -1)
+ {
+ expand_string_message = string_sprintf("failed to create socket: "
+ "%s", strerror(errno));
+ goto SOCK_FAIL;
+ }
+
+ if (ip_connect(fd, af, h->address, port, timeout) == 0)
+ {
+ connected = TRUE;
+ break;
+ }
+ }
+
+ if (!connected)
+ {
+ expand_string_message = string_sprintf("failed to connect to "
+ "socket %s: couldn't connect to any host", sub_arg[0],
+ strerror(errno));
+ goto SOCK_FAIL;
+ }
}
- sockun.sun_family = AF_UNIX;
- sprintf(sockun.sun_path, "%.*s", (int)(sizeof(sockun.sun_path)-1),
- sub_arg[0]);
- if(connect(fd, (struct sockaddr *)(&sockun), sizeof(sockun)) == -1)
+ /* Handle a Unix domain socket */
+
+ else
{
- expand_string_message = string_sprintf("failed to connect to socket "
- "%s: %s", sub_arg[0], strerror(errno));
- goto SOCK_FAIL;
+ int rc;
+ if ((fd = socket(PF_UNIX, SOCK_STREAM, 0)) == -1)
+ {
+ expand_string_message = string_sprintf("failed to create socket: %s",
+ strerror(errno));
+ goto SOCK_FAIL;
+ }
+
+ sockun.sun_family = AF_UNIX;
+ sprintf(sockun.sun_path, "%.*s", (int)(sizeof(sockun.sun_path)-1),
+ sub_arg[0]);
+
+ sigalrm_seen = FALSE;
+ alarm(timeout);
+ rc = connect(fd, (struct sockaddr *)(&sockun), sizeof(sockun));
+ alarm(0);
+ if (sigalrm_seen)
+ {
+ expand_string_message = US "socket connect timed out";
+ goto SOCK_FAIL;
+ }
+ if (rc < 0)
+ {
+ expand_string_message = string_sprintf("failed to connect to socket "
+ "%s: %s", sub_arg[0], strerror(errno));
+ goto SOCK_FAIL;
+ }
}
+
DEBUG(D_expand) debug_printf("connected to socket %s\n", sub_arg[0]);
/* Write the request string, if not empty */
}
}
+ /* Shut down the sending side of the socket. This helps some servers to
+ recognise that it is their turn to do some work. Just in case some
+ system doesn't have this function, make it conditional. */
+
+ #ifdef SHUT_WR
+ shutdown(fd, SHUT_WR);
+ #endif
+
/* Now we need to read from the socket, under a timeout. The function
that reads a file can be used. */
alarm(timeout);
yield = cat_file(f, yield, &size, &ptr, sub_arg[3]);
alarm(0);
- fclose(f);
+ (void)fclose(f);
/* After a timeout, we restore the pointer in the result, that is,
make sure we add nothing from the socket. */
if (sigalrm_seen)
{
ptr = save_ptr;
- expand_string_message = US"socket read timed out";
+ expand_string_message = US "socket read timed out";
goto SOCK_FAIL;
}
}
/* Nothing is written to the standard input. */
- close(fd_in);
+ (void)close(fd_in);
/* Wait for the process to finish, applying the timeout, and inspect its
return code for serious disasters. Simple non-zero returns are passed on.
f = fdopen(fd_out, "rb");
lookup_value = NULL;
lookup_value = cat_file(f, lookup_value, &lsize, &lptr, NULL);
- fclose(f);
+ (void)fclose(f);
}
/* Process the yes/no strings; $value may be useful in both cases */
}
+ /* Handle list operations */
+
+ case EITEM_FILTER:
+ case EITEM_MAP:
+ case EITEM_REDUCE:
+ {
+ int sep = 0;
+ int save_ptr = ptr;
+ uschar outsep[2] = { '\0', '\0' };
+ uschar *list, *expr, *temp;
+ uschar *save_iterate_item = iterate_item;
+ uschar *save_lookup_value = lookup_value;
+
+ while (isspace(*s)) s++;
+ if (*s++ != '{') goto EXPAND_FAILED_CURLY;
+
+ list = expand_string_internal(s, TRUE, &s, skipping);
+ if (list == NULL) goto EXPAND_FAILED;
+ if (*s++ != '}') goto EXPAND_FAILED_CURLY;
+
+ if (item_type == EITEM_REDUCE)
+ {
+ while (isspace(*s)) s++;
+ if (*s++ != '{') goto EXPAND_FAILED_CURLY;
+ temp = expand_string_internal(s, TRUE, &s, skipping);
+ if (temp == NULL) goto EXPAND_FAILED;
+ lookup_value = temp;
+ if (*s++ != '}') goto EXPAND_FAILED_CURLY;
+ }
+
+ while (isspace(*s)) s++;
+ if (*s++ != '{') goto EXPAND_FAILED_CURLY;
+
+ expr = s;
+
+ /* For EITEM_FILTER, call eval_condition once, with result discarded (as
+ if scanning a "false" part). This allows us to find the end of the
+ condition, because if the list is empty, we won't actually evaluate the
+ condition for real. For EITEM_MAP and EITEM_REDUCE, do the same, using
+ the normal internal expansion function. */
+
+ if (item_type == EITEM_FILTER)
+ {
+ temp = eval_condition(expr, NULL);
+ if (temp != NULL) s = temp;
+ }
+ else
+ {
+ temp = expand_string_internal(s, TRUE, &s, TRUE);
+ }
+
+ if (temp == NULL)
+ {
+ expand_string_message = string_sprintf("%s inside \"%s\" item",
+ expand_string_message, name);
+ goto EXPAND_FAILED;
+ }
+
+ while (isspace(*s)) s++;
+ if (*s++ != '}')
+ {
+ expand_string_message = string_sprintf("missing } at end of condition "
+ "or expression inside \"%s\"", name);
+ goto EXPAND_FAILED;
+ }
+
+ while (isspace(*s)) s++;
+ if (*s++ != '}')
+ {
+ expand_string_message = string_sprintf("missing } at end of \"%s\"",
+ name);
+ goto EXPAND_FAILED;
+ }
+
+ /* If we are skipping, we can now just move on to the next item. When
+ processing for real, we perform the iteration. */
+
+ if (skipping) continue;
+ while ((iterate_item = string_nextinlist(&list, &sep, NULL, 0)) != NULL)
+ {
+ *outsep = (uschar)sep; /* Separator as a string */
+
+ DEBUG(D_expand) debug_printf("%s: $item = \"%s\"\n", name, iterate_item);
+
+ if (item_type == EITEM_FILTER)
+ {
+ BOOL condresult;
+ if (eval_condition(expr, &condresult) == NULL)
+ {
+ iterate_item = save_iterate_item;
+ lookup_value = save_lookup_value;
+ expand_string_message = string_sprintf("%s inside \"%s\" condition",
+ expand_string_message, name);
+ goto EXPAND_FAILED;
+ }
+ DEBUG(D_expand) debug_printf("%s: condition is %s\n", name,
+ condresult? "true":"false");
+ if (condresult)
+ temp = iterate_item; /* TRUE => include this item */
+ else
+ continue; /* FALSE => skip this item */
+ }
+
+ /* EITEM_MAP and EITEM_REDUCE */
+
+ else
+ {
+ temp = expand_string_internal(expr, TRUE, NULL, skipping);
+ if (temp == NULL)
+ {
+ iterate_item = save_iterate_item;
+ expand_string_message = string_sprintf("%s inside \"%s\" item",
+ expand_string_message, name);
+ goto EXPAND_FAILED;
+ }
+ if (item_type == EITEM_REDUCE)
+ {
+ lookup_value = temp; /* Update the value of $value */
+ continue; /* and continue the iteration */
+ }
+ }
+
+ /* We reach here for FILTER if the condition is true, always for MAP,
+ and never for REDUCE. The value in "temp" is to be added to the output
+ list that is being created, ensuring that any occurrences of the
+ separator character are doubled. Unless we are dealing with the first
+ item of the output list, add in a space if the new item begins with the
+ separator character, or is an empty string. */
+
+ if (ptr != save_ptr && (temp[0] == *outsep || temp[0] == 0))
+ yield = string_cat(yield, &size, &ptr, US" ", 1);
+
+ /* Add the string in "temp" to the output list that we are building,
+ This is done in chunks by searching for the separator character. */
+
+ for (;;)
+ {
+ size_t seglen = Ustrcspn(temp, outsep);
+ yield = string_cat(yield, &size, &ptr, temp, seglen + 1);
+
+ /* If we got to the end of the string we output one character
+ too many; backup and end the loop. Otherwise arrange to double the
+ separator. */
+
+ if (temp[seglen] == '\0') { ptr--; break; }
+ yield = string_cat(yield, &size, &ptr, outsep, 1);
+ temp += seglen + 1;
+ }
+
+ /* Output a separator after the string: we will remove the redundant
+ final one at the end. */
+
+ yield = string_cat(yield, &size, &ptr, outsep, 1);
+ } /* End of iteration over the list loop */
+
+ /* REDUCE has generated no output above: output the final value of
+ $value. */
+
+ if (item_type == EITEM_REDUCE)
+ {
+ yield = string_cat(yield, &size, &ptr, lookup_value,
+ Ustrlen(lookup_value));
+ lookup_value = save_lookup_value; /* Restore $value */
+ }
+
+ /* FILTER and MAP generate lists: if they have generated anything, remove
+ the redundant final separator. Even though an empty item at the end of a
+ list does not count, this is tidier. */
+
+ else if (ptr != save_ptr) ptr--;
+
+ /* Restore preserved $item */
+
+ iterate_item = save_iterate_item;
+ continue;
+ }
+
+
/* If ${dlfunc support is configured, handle calling dynamically-loaded
functions, unless locked out at this time. Syntax is ${dlfunc{file}{func}}
or ${dlfunc{file}{func}{arg}} or ${dlfunc{file}{func}{arg1}{arg2}} or up to
continue;
}
+ /* Note that for Darwin and Cygwin, BASE_62 actually has the value 36 */
+
case EOP_BASE62D:
{
uschar buf[16];
if (t == NULL)
{
expand_string_message = string_sprintf("argument for base62d "
- "operator is \"%s\", which is not a base 62 number", sub);
+ "operator is \"%s\", which is not a base %d number", sub,
+ BASE_62);
goto EXPAND_FAILED;
}
- n = n * 62 + (t - base62_chars);
+ n = n * BASE_62 + (t - base62_chars);
}
(void)sprintf(CS buf, "%ld", n);
yield = string_cat(yield, &size, &ptr, buf, Ustrlen(buf));
continue;
}
+ case EOP_ADDRESSES:
+ {
+ uschar outsep[2] = { ':', '\0' };
+ uschar *address, *error;
+ int save_ptr = ptr;
+ int start, end, domain; /* Not really used */
+
+ while (isspace(*sub)) sub++;
+ if (*sub == '>') { *outsep = *++sub; ++sub; }
+ parse_allow_group = TRUE;
+
+ for (;;)
+ {
+ uschar *p = parse_find_address_end(sub, FALSE);
+ uschar saveend = *p;
+ *p = '\0';
+ address = parse_extract_address(sub, &error, &start, &end, &domain,
+ FALSE);
+ *p = saveend;
+
+ /* Add the address to the output list that we are building. This is
+ done in chunks by searching for the separator character. At the
+ start, unless we are dealing with the first address of the output
+ list, add in a space if the new address begins with the separator
+ character, or is an empty string. */
+
+ if (address != NULL)
+ {
+ if (ptr != save_ptr && address[0] == *outsep)
+ yield = string_cat(yield, &size, &ptr, US" ", 1);
+
+ for (;;)
+ {
+ size_t seglen = Ustrcspn(address, outsep);
+ yield = string_cat(yield, &size, &ptr, address, seglen + 1);
+
+ /* If we got to the end of the string we output one character
+ too many. */
+
+ if (address[seglen] == '\0') { ptr--; break; }
+ yield = string_cat(yield, &size, &ptr, outsep, 1);
+ address += seglen + 1;
+ }
+
+ /* Output a separator after the string: we will remove the
+ redundant final one at the end. */
+
+ yield = string_cat(yield, &size, &ptr, outsep, 1);
+ }
+
+ if (saveend == '\0') break;
+ sub = p + 1;
+ }
+
+ /* If we have generated anything, remove the redundant final
+ separator. */
+
+ if (ptr != save_ptr) ptr--;
+ parse_allow_group = FALSE;
+ continue;
+ }
+
+
/* quote puts a string in quotes if it is empty or contains anything
other than alphamerics, underscore, dot, or hyphen.
{
uschar buffer[2048];
uschar *string = parse_quote_2047(sub, Ustrlen(sub), headers_charset,
- buffer, sizeof(buffer));
+ buffer, sizeof(buffer), FALSE);
yield = string_cat(yield, &size, &ptr, string, Ustrlen(string));
continue;
}
+ /* RFC 2047 decode */
+
+ case EOP_RFC2047D:
+ {
+ int len;
+ uschar *error;
+ uschar *decoded = rfc2047_decode(sub, check_rfc2047_length,
+ headers_charset, '?', &len, &error);
+ if (error != NULL)
+ {
+ expand_string_message = error;
+ goto EXPAND_FAILED;
+ }
+ yield = string_cat(yield, &size, &ptr, decoded, len);
+ continue;
+ }
+
/* from_utf8 converts UTF-8 to 8859-1, turning non-existent chars into
underscores */
/* Handle time period formating */
+ case EOP_TIME_EVAL:
+ {
+ int n = readconf_readtime(sub, 0, FALSE);
+ if (n < 0)
+ {
+ expand_string_message = string_sprintf("string \"%s\" is not an "
+ "Exim time interval in \"%s\" operator", sub, name);
+ goto EXPAND_FAILED;
+ }
+ sprintf(CS var_buffer, "%d", n);
+ yield = string_cat(yield, &size, &ptr, var_buffer, Ustrlen(var_buffer));
+ continue;
+ }
+
case EOP_TIME_INTERVAL:
{
int n;
mode_t mode;
struct stat st;
+ if ((expand_forbid & RDO_EXISTS) != 0)
+ {
+ expand_string_message = US"Use of the stat() expansion is not permitted";
+ goto EXPAND_FAILED;
+ }
+
if (stat(CS sub, &st) < 0)
{
expand_string_message = string_sprintf("stat(%s) failed: %s",
{
expand_string_message =
string_sprintf("unknown variable in \"${%s}\"", name);
+ check_variable_error_message(name);
goto EXPAND_FAILED;
}
len = Ustrlen(value);
/* Expand a string, and convert the result into an integer.
-Argument: the string to be expanded
+Arguments:
+ string the string to be expanded
+ isplus TRUE if a non-negative number is expected
Returns: the integer value, or
-1 for an expansion error ) in both cases, message in
-2 for an integer interpretation error ) expand_string_message
-
+ expand_string_message is set NULL for an OK integer
*/
int
-expand_string_integer(uschar *string)
+expand_string_integer(uschar *string, BOOL isplus)
{
long int value;
uschar *s = expand_string(string);
uschar *msg = US"invalid integer \"%s\"";
uschar *endptr;
+/* If expansion failed, expand_string_message will be set. */
+
if (s == NULL) return -1;
/* On an overflow, strtol() returns LONG_MAX or LONG_MIN, and sets errno
systems, so we set it zero ourselves. */
errno = 0;
-value = strtol(CS s, CSS &endptr, 0);
+expand_string_message = NULL; /* Indicates no error */
+value = strtol(CS s, CSS &endptr, 10);
if (endptr == s)
{
msg = US"integer expected but \"%s\" found";
}
+else if (value < 0 && isplus)
+ {
+ msg = US"non-negative integer expected but \"%s\" found";
+ }
else
{
/* Ensure we can cast this down to an int */
git://git.exim.org / exim.git / blobdiff