Test suite continue past unexpected client errors

[exim.git] / test / runtest

diff --git a/test/runtest b/test/runtest
index 57caa2c1ff3c7ec81996aceb3a15da8b82909a8c..166a701e1c8266ccc910fde9d206aaacf573508e 100755 (executable)
--- a/test/runtest
+++ b/test/runtest
@@ -165,7 +165,7 @@ if (exists $TEST_STATE->{exim_pid})
   {
   $pid = $TEST_STATE->{exim_pid};
   print "Tidyup: killing wait-mode daemon pid=$pid\n";
   {
   $pid = $TEST_STATE->{exim_pid};
   print "Tidyup: killing wait-mode daemon pid=$pid\n";

-  system("sudo kill -SIGINT $pid");
+  system("sudo kill -INT $pid");

   }
 
 if (opendir(DIR, "spool"))
   }
 
 if (opendir(DIR, "spool"))


@@ -179,7 +179,7 @@ if (opendir(DIR, "spool"))
     chomp($pid = <PID>);
     close(PID);
     print "Tidyup: killing daemon pid=$pid\n";
     chomp($pid = <PID>);
     close(PID);
     print "Tidyup: killing daemon pid=$pid\n";

-    system("sudo rm -f spool/$spool; sudo kill -SIGINT $pid");
+    system("sudo rm -f spool/$spool; sudo kill -INT $pid");

     }
   }
 else
     }
   }
 else


@@ -497,6 +497,7 @@ RESET_AFTER_EXTRA_LINE_READ:
   # different protocols; can't rely upon TLS 1.2's AES256-GCM-SHA384, so we
   # treat the standard algorithms the same.
   # So far, have seen:
   # different protocols; can't rely upon TLS 1.2's AES256-GCM-SHA384, so we
   # treat the standard algorithms the same.
   # So far, have seen:

+  #   TLSv1:AES128-GCM-SHA256:128

   #   TLSv1:AES256-SHA:256
   #   TLSv1.1:AES256-SHA:256
   #   TLSv1.2:AES256-GCM-SHA384:256
   #   TLSv1:AES256-SHA:256
   #   TLSv1.1:AES256-SHA:256
   #   TLSv1.2:AES256-GCM-SHA384:256


@@ -509,6 +510,8 @@ RESET_AFTER_EXTRA_LINE_READ:
   # (and \b doesn't match between ' ' and '(' )
 
   s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.[12]:/$1TLSv1:/xg;
   # (and \b doesn't match between ' ' and '(' )
 
   s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.[12]:/$1TLSv1:/xg;

+  s/\bAES128-GCM-SHA256:128\b/AES256-SHA:256/g;
+  s/\bAES128-GCM-SHA256\b/AES256-SHA/g;

   s/\bAES256-GCM-SHA384\b/AES256-SHA/g;
   s/\bDHE-RSA-AES256-SHA\b/AES256-SHA/g;
 
   s/\bAES256-GCM-SHA384\b/AES256-SHA/g;
   s/\bDHE-RSA-AES256-SHA\b/AES256-SHA/g;
 


@@ -538,7 +541,7 @@ RESET_AFTER_EXTRA_LINE_READ:
 
   # (this new one is a generic channel-read error, but the testsuite
   # only hits it in one place)
 
   # (this new one is a generic channel-read error, but the testsuite
   # only hits it in one place)

-  s/TLS error on connection to \d{1,3}(.\d{1,3}){3} \[\d{1,3}(.\d{1,3}){3}\] \(gnutls_handshake\): Error in the pull function\./a TLS session is required for ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4], but an attempt to start TLS failed/g;
+  s/TLS error on connection \(gnutls_handshake\): Error in the pull function\./a TLS session is required but an attempt to start TLS failed/g;

 
   # (replace old with new, hoping that old only happens in one situation)
   s/TLS error on connection to \d{1,3}(.\d{1,3}){3} \[\d{1,3}(.\d{1,3}){3}\] \(gnutls_handshake\): A TLS packet with unexpected length was received./a TLS session is required for ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4], but an attempt to start TLS failed/g;
 
   # (replace old with new, hoping that old only happens in one situation)
   s/TLS error on connection to \d{1,3}(.\d{1,3}){3} \[\d{1,3}(.\d{1,3}){3}\] \(gnutls_handshake\): A TLS packet with unexpected length was received./a TLS session is required for ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4], but an attempt to start TLS failed/g;


@@ -751,7 +754,7 @@ RESET_AFTER_EXTRA_LINE_READ:
   # numbers, or handle specific bad conditions in different ways, leading to
   # different wording in the error messages, so we cannot compare them.
 
   # numbers, or handle specific bad conditions in different ways, leading to
   # different wording in the error messages, so we cannot compare them.
 

-  s/(TLS error on connection (?:from|to) .*? \(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
+  s/(TLS error on connection (?:from .* )?\(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;

 
   # ======== Maildir things ========
   # timestamp output in maildir processing
 
   # ======== Maildir things ========
   # timestamp output in maildir processing


@@ -837,6 +840,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     # openssl version variances
     next if /^SSL info: unknown state/;
     next if /^SSL info: SSLv2\/v3 write client hello A/;
     # openssl version variances
     next if /^SSL info: unknown state/;
     next if /^SSL info: SSLv2\/v3 write client hello A/;

+    next if /^SSL info: SSLv3 read server key exchange A/;

 
     }
 
 
     }
 


@@ -999,6 +1003,11 @@ RESET_AFTER_EXTRA_LINE_READ:
         @saved = ();
         }
 
         @saved = ();
         }
 

+    # Skip hosts_require_dane checks when the options
+    # are unset, because dane ain't always there.
+
+    next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
+

       # Skip some lines that Exim puts out at the start of debugging output
       # because they will be different in different binaries.
 
       # Skip some lines that Exim puts out at the start of debugging output
       # because they will be different in different binaries.
 


@@ -1747,14 +1756,14 @@ if (/^killdaemon/)
     print ">> killdaemon: recovered pid $pid\n" if $debug;
     if ($pid)
       {
     print ">> killdaemon: recovered pid $pid\n" if $debug;
     if ($pid)
       {

-      run_system("sudo /bin/kill -SIGINT $pid");
+      run_system("sudo /bin/kill -INT $pid");

       wait;
       }
     } else {
     $pid = `cat $parm_cwd/spool/exim-daemon.*`;
     if ($pid)
       {
       wait;
       }
     } else {
     $pid = `cat $parm_cwd/spool/exim-daemon.*`;
     if ($pid)
       {

-      run_system("sudo /bin/kill -SIGINT $pid");
+      run_system("sudo /bin/kill -INT $pid");

       close DAEMONCMD;                                   # Waits for process
       }
     }
       close DAEMONCMD;                                   # Waits for process
       }
     }


@@ -2001,7 +2010,8 @@ elsif (/^([A-Z_]+=\S+\s+)?(\d+)?\s*(sudo\s+)?exim(_\S+)?\s+(.*)$/)
     for ($i = @msglist; $i > 0; $i--) { $args =~ s/\$msg$i/$msglist[$i-1]/g; }
     if ( $args =~ /\$msg\d/ )
       {
     for ($i = @msglist; $i > 0; $i--) { $args =~ s/\$msg$i/$msglist[$i-1]/g; }
     if ( $args =~ /\$msg\d/ )
       {

-      tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n");
+      tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n")
+        unless $force_continue;

       }
     }
 
       }
     }
 


@@ -2752,7 +2762,7 @@ while (($parm_ipv4 eq "" || $parm_ipv6 eq "") && ($_ = <IFCONFIG>))
       $_ =~ /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)\s/i)
     {
     $ip = $1;
       $_ =~ /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)\s/i)
     {
     $ip = $1;

-    next if ($ip eq "127.0.0.1");
+    next if ($ip =~ /^127\./);

     $parm_ipv4 = $ip;
     }
 
     $parm_ipv4 = $ip;
     }