Fix for unknown responses from Dovecot authenticator. Fixes: #954
[exim.git] / src / OS / Makefile-Base
index 698a2b20792dd4d9282fca1a3b3305b6aed00665..451fcd24505cfdb8f1474a902823da969de1f941 100644 (file)
@@ -1,4 +1,4 @@
-# $Cambridge: exim/src/OS/Makefile-Base,v 1.10 2006/02/07 14:20:58 ph10 Exp $
+# $Cambridge: exim/src/OS/Makefile-Base,v 1.17 2009/06/10 07:34:04 tom Exp $
 
 # This file is the basis of the main makefile for Exim and friends. The
 # makefile at the top level arranges to build the main makefile by calling
@@ -96,20 +96,20 @@ config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
 # therefore always be run, even if the files exist. This shouldn't in fact be a
 # problem, but it does no harm. Other make programs will just ignore this.
 
-.PHONY: all allexim buildauths buildlookups buildpcre buildrouters \
+.PHONY: all allexim buildauths buildlookups buildpdkim buildrouters \
         buildtransports checklocalmake clean
 
 
 # This is the real default target for all the various exim binaries and
 # scripts, once the configuring stuff is done.
 
-allexim: config.h buildpcre $(EXIM_MONITOR) exicyclog exinext exiwhat \
+allexim: config.h $(EXIM_MONITOR) exicyclog exinext exiwhat \
         exigrep eximstats exipick exiqgrep exiqsumm \
         transport-filter.pl convert4r3 convert4r4 \
         exim_checkaccess \
         exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock \
         buildlookups buildrouters buildtransports \
-        buildauths exim
+        buildauths buildpdkim exim
 
 
 # Targets for special-purpose configuration header builders
@@ -132,10 +132,12 @@ exicyclog: Makefile config.h ../src/exicyclog.src
          -e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
          -e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
          -e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
-         -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
          -e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
+         -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
+         -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
          -e "s?MV_COMMAND?$(MV_COMMAND)?" \
          -e "s?RM_COMMAND?$(RM_COMMAND)?" \
+         -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
          ../src/exicyclog.src > exicyclog-t
        @mv exicyclog-t exicyclog
        @chmod a+x exicyclog
@@ -298,14 +300,14 @@ convert4r4: Makefile ../src/convert4r4.src
 
 OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
 OBJ_WITH_OLD_DEMIME = demime.o
-OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o dk.o
+OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o dcc.o
 
 # Targets for final binaries; the main one has a build number which is
 # updated each time. We don't bother with that for the auxiliaries.
 
 OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
         directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
-        filtertest.o globals.o \
+        filtertest.o globals.o dkim.o \
         header.o host.o ip.o log.o lss.o match.o moan.o \
         os.o parse.o queue.o \
         rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
@@ -314,7 +316,7 @@ OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
         local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
         $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL)
 
-exim:   pcre/libpcre.a lookups/lookups.a auths/auths.a \
+exim:   lookups/lookups.a auths/auths.a pdkim/pdkim.a \
         routers/routers.a transports/transports.a \
         $(OBJ_EXIM) version.c
        @echo " "
@@ -325,12 +327,11 @@ exim:   pcre/libpcre.a lookups/lookups.a auths/auths.a \
        rm -f exim
        @echo "$(LNCC) -o exim"
        $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
-         pcre/libpcre.a \
          routers/routers.a transports/transports.a lookups/lookups.a \
-         auths/auths.a \
+         auths/auths.a pdkim/pdkim.a \
          $(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
          $(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
-         $(PERL_LIBS) $(TLS_LIBS) $(LDFLAGS)
+         $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
        @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
          echo $(STRIP_COMMAND) exim; \
          $(STRIP_COMMAND) exim; \
@@ -429,14 +430,14 @@ MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \
 
 OBJ_MONBIN = util-spool_in.o util-store.o util-string.o tod.o tree.o $(MONBIN)
 
-eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) pcre/libpcre.a \
+eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) \
             ../exim_monitor/em_version.c
        @echo "$(CC) exim_monitor/em_version.c"
        $(FE)$(CC) -o em_version.o -c \
          $(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
        @echo "$(LNCC) -o eximon.bin"
        $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
-       $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 pcre/libpcre.a \
+       $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
          $(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
        @if [ x"$(STRIP_COMMAND)" != x"" ]; then \
          echo $(STRIP_COMMAND) eximon.bin; \
@@ -526,7 +527,7 @@ util-os.o:       $(HDRS) os.c
 # The local scan module depends only on its own special header, and is compiled
 # from a source whose location is set by configuration.
 
-local_scan.o:    Makefile local_scan.h ../$(LOCAL_SCAN_SOURCE)
+local_scan.o:    Makefile config.h local_scan.h ../$(LOCAL_SCAN_SOURCE)
        @echo "$(CC) local_scan.c"
        $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
 
@@ -577,7 +578,7 @@ tod.o:           $(HDRS) tod.c
 transport.o:     $(HDRS) transport.c
 tree.o:          $(HDRS) tree.c
 verify.o:        $(HDRS) verify.c
-
+dkim.o:          $(HDRS) dkim.c
 
 # Dependencies for WITH_CONTENT_SCAN modules
 
@@ -598,7 +599,7 @@ demime.o:        $(HDRS) demime.c
 bmi_spam.o:      $(HDRS) bmi_spam.c
 spf.o:           $(HDRS) spf.h spf.c
 srs.o:           $(HDRS) srs.h srs.c
-dk.o:            $(HDRS) dk.h dk.c
+dcc.o:           $(HDRS) dcc.h dcc.c
 
 # The module containing tables of available lookups, routers, auths, and
 # transports must be rebuilt if any of them are. However, because the makefiles
@@ -633,37 +634,11 @@ $(MONBIN): $(HDRS)
                   ../exim_monitor/`echo $@ | sed 's/o$$/c/'`
 
 
-# Targets for the various libraries that Exim uses. This coding is tedious,
-# because different versions of "make" behave in different ways with regard
-# to rebuilding. If these target names are of the form pcre/libpcre.a, for
-# example, then a forcing mechanism is required to get them obeyed each time.
-# That's fine on Solaris and other systems; the rebuilding of the exim target
-# happens only if the libraries are actually rebuilt. However, on IRIX, if
-# the target is forced, the exim target gets unnecessarily rebuilt even if
-# the .a file is not. Contrariwise, if we use dummy names, they don't interact
-# with the building of exim (and eximon.bin), but for libpcre Exim doesn't get
-# rebuilt when it should. (For the others it does, because they remove
-# drtables.o when they rebuild.) To get round this, we forcibly remove the
-# binary when it needs to be rebuilt.
-
-# The PCRE regex library. Move the pcretest program to the util directory. Some
-# "clever" versions of make notice that there are two successive shell
-# commands, and they run them in the same shell. This means that we have to
-# take care to encapsulate change of directory in parentheses, so that it
-# reverts when it should.
-
-buildpcre:
-        @(cd pcre; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" \
-          FE="$(FE)" CFLAGS="$(CFLAGS) $(PCRE_CFLAGS)" \
-          RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
-          INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)")
-        @if $(SHELL) $(SCRIPTS)/newer pcre/libpcre.a exim; then \
-          rm -f exim eximon.bin; fi
-        @echo " "
+# Targets for the various libraries that Exim uses.
 
 # The lookups library.
 
-buildlookups:
+buildlookups lookups/lookups.a: config.h
         @cd lookups; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
           FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
           INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"; \
@@ -671,7 +646,7 @@ buildlookups:
 
 # The routers library.
 
-buildrouters:
+buildrouters routers/routers.a: config.h
         @cd routers; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
           FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
           INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
@@ -679,7 +654,7 @@ buildrouters:
 
 # The transports library.
 
-buildtransports:
+buildtransports transports/transports.a: config.h
         @cd transports; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
           FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
           INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
@@ -687,12 +662,20 @@ buildtransports:
 
 # The library of authorization modules
 
-buildauths:
+buildauths auths/auths.a: config.h
         @cd auths; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
           FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
           INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
         echo " "
 
+# The PDKIM library
+
+buildpdkim pdkim/pdkim.a: config.h
+        @cd pdkim; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+          FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
+          INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
+        echo " "
+
 # The "clean", "install", and "makefile" targets just pass themselves back to
 # the main Exim makefile. These targets will be obeyed only if "make" is obeyed
 # for them in the build directory.