-$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.382 2006/07/27 10:36:34 ph10 Exp $
+$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.462 2007/01/23 15:08:45 ph10 Exp $
Change log file for Exim from version 4.21
-------------------------------------------
+Exim version 4.67
+-----------------
+
+MH/01 Fix for bug #448, segfault in Dovecot authenticator when interface_address
+ is unset (happens when testing with -bh and -oMi isn't used). Thanks to
+ Jan Srzednicki.
+
+PH/01 Added a new log selector smtp_no_mail, to log SMTP sessions that do not
+ issue a MAIL command.
+
+PH/02 In an ACL statement such as
+
+ deny dnslists = X!=127.0.0.2 : X=127.0.0.2
+
+ if a client was not listed at all, or was listed with a value other than
+ 127.0.0.2, in the X list, but was listed with 127.0.0.2 in the Y list,
+ the condition was not true (as it should be), so access was not denied.
+ The bug was that the ! inversion was incorrectly passed on to the second
+ item. This has been fixed.
+
+PH/03 Added additional dnslists conditions == and =& which are different from
+ = and & when the dns lookup returns more than one IP address.
+
+PH/04 Added gnutls_require_{kx,mac,protocols} to give more control over the
+ cipher suites used by GnuTLS. These options are ignored by OpenSSL.
+
+PH/05 After discussion on the list, added a compile time option ENABLE_DISABLE_
+ FSYNC, which compiles an option called disable_fsync that allows for
+ bypassing fsync(). The documentation is heavily laced with warnings.
+
+SC/01 Updated eximstats to collate all SpamAssassin rejects into one bucket.
+
+PH/06 Some tidies to the infrastructure of the Test Suite that is concerned
+ with the auxiliary C programs that it uses: (1) Arrange for BIND_8_COMPAT
+ to be defined when compiling on OSX (Darwin); (2) Tidies to the Makefile,
+ including adding "make clean"; (3) Added -fPIC when compiling the test
+ dynamically loaded module, to get rid of a warning.
+
+MH/02 Fix for bug #451, causing paniclog entries to be written if a bounce
+ message fails, move_frozen_messages = true and ignore_bounce_errors_after
+ = 0s. The bug is otherwise harmless.
+
+PH/07 There was a bug in the dovecot authenticator such that the value of
+ $auth1 could be overwritten, and so not correctly preserved, after a
+ successful authentication. This usually meant that the value preserved by
+ the server_setid option was incorrect.
+
+PH/08 Added $smtp_count_at_connection_start, deliberately with a long name.
+
+PH/09 Installed PCRE release 7.0.
+
+
+Exim version 4.66
+-----------------
+
+PH/01 Two more bugs that were introduced by 4.64/PH/07, in addition to the one
+ fixed by 4.65/MH/01 (is this a record?) are fixed:
+
+ (i) An empty string was always treated as zero by the numeric comparison
+ operators. This behaviour has been restored.
+
+ (ii) It is documented that the numeric comparison operators always treat
+ their arguments as decimal numbers. This was broken in that numbers
+ starting with 0 were being interpreted as octal.
+
+ While fixing these problems I realized that there was another issue that
+ hadn't been noticed. Values of message_size_limit (both the global option
+ and the transport option) were treated as octal if they started with 0.
+ The documentation was vague. These values are now always treated as
+ decimal, and I will make that clear in the documentation.
+
+
+Exim version 4.65
+-----------------
+
+TK/01 Disable default definition of HAVE_LINUX_SENDFILE. Clashes with
+ Linux large file support (_FILE_OFFSET_BITS=64) on older glibc
+ versions. (#438)
+
+MH/01 Don't check that the operands of numeric comparison operators are
+ integers when their expansion is in "skipping" mode (fixes bug
+ introduced by 4.64-PH/07).
+
+PH/01 If a system filter or a router generates more than SHRT_MAX (32767)
+ child addresses, Exim now panics and dies. Previously, because the count
+ is held in a short int, deliveries were likely to be lost. As such a
+ large number of recipients for a single message is ridiculous
+ (performance will be very, very poor), I have chosen to impose a limit
+ rather than extend the field.
+
+
+Exim version 4.64
+-----------------
+
+TK/01 Bugzilla #401. Fix DK spooling code so that it can overwrite a
+ leftover -K file (the existence of which was triggered by #402).
+ While we were at it, introduced process PID as part of the -K
+ filename. This should rule out race conditions when creating
+ these files.
+
+TK/02 Bugzilla #402. Apply patch from Simon Arlott, speeding up DK signing
+ processing considerably. Previous code took too long for large mails,
+ triggering a timeout which in turn triggers #401.
+
+TK/03 Introduced HAVE_LINUX_SENDFILE to os.h-Linux. Currently only used
+ in the DK code in transports.c. sendfile() is not really portable,
+ hence the _LINUX specificness.
+
+TF/01 In the add_headers option to the mail command in an Exim filter,
+ there was a bug that Exim would claim a syntax error in any
+ header after the first one which had an odd number of characters
+ in the field name.
+
+PH/01 If a server that rejects MAIL FROM:<> was the target of a sender
+ callout verification, Exim cached a "reject" for the entire domain. This
+ is correct for most verifications, but it is not correct for a recipient
+ verification with use_sender or use_postmaster set, because in that case
+ the callout does not use MAIL FROM:<>. Exim now distinguishes the special
+ case of MAIL FROM:<> rejection from other early rejections (e.g.
+ rejection of HELO). When verifying a recipient using a non-null MAIL
+ address, the cache is ignored if it shows MAIL FROM:<> rejection.
+ Whatever the result of the callout, the value of the domain cache is
+ left unchanged (for any other kind of callout, getting as far as trying
+ RCPT means that the domain itself is ok).
+
+PH/02 Tidied a number of unused variable and signed/unsigned warnings that
+ gcc 4.1.1 threw up.
+
+PH/03 On Solaris, an unexpectedly close socket (dropped connection) can
+ manifest itself as EPIPE rather than ECONNECT. When tidying away a
+ session, the daemon ignores ECONNECT errors and logs others; it now
+ ignores EPIPE as well.
+
+PH/04 Applied Nico Erfurth's refactoring patch to tidy up mime.c
+ (quoted-printable decoding).
+
+PH/05 Applied Nico Erfurth's refactoring patch to tidy up spool_mbox.c, and
+ later the small subsequent patch to fix an introduced bug.
+
+PH/06 Installed the latest Cygwin Makefile from the Cygwin maintainer.
+
+PH/07 There was no check for overflow in expansions such as ${if >{1}{4096M}}.
+
+PH/08 An error is now given if message_size_limit is specified negative.
+
+PH/09 Applied and tidied up Jakob Hirsch's patch for allowing ACL variables
+ to be given (somewhat) arbitrary names.
+
+JJ/01 exipick 20060919.0, allow for arbitrary acl_ variables introduced
+ in 4.64-PH/09.
+
+JJ/02 exipick 20060919.0, --show-vars args can now be regular expressions,
+ miscellaneous code fixes
+
+PH/10 Added the log_reject_target ACL modifier to specify where to log
+ rejections.
+
+PH/11 Callouts were setting the name used for EHLO/HELO from $smtp_active_
+ hostname. This is wrong, because it relates to the incoming message (and
+ probably the interface on which it is arriving) and not to the outgoing
+ callout (which could be using a different interface). This has been
+ changed to use the value of the helo_data option from the smtp transport
+ instead - this is what is used when a message is actually being sent. If
+ there is no remote transport (possible with a router that sets up host
+ addresses), $smtp_active_hostname is used.
+
+PH/12 Installed Andrey Panin's patch to add a dovecot authenticator. Various
+ tweaks were necessary in order to get it to work (see also 21 below):
+ (a) The code assumed that strncpy() returns a negative number on buffer
+ overflow, which isn't the case. Replaced with Exim's string_format()
+ function.
+ (b) There were several signed/unsigned issues. I just did the minimum
+ hacking in of casts. There is scope for a larger refactoring.
+ (c) The code used strcasecmp() which is not a standard C function.
+ Replaced with Exim's strcmpic() function.
+ (d) The code set only $1; it now sets $auth1 as well.
+ (e) A simple test gave the error "authentication client didn't specify
+ service in request". It would seem that Dovecot has changed its
+ interface. Fortunately there's a specification; I followed it and
+ changed what the client sends and it appears to be working now.
+
+PH/13 Added $message_headers_raw to provide the headers without RFC 2047
+ decoding.
+
+PH/14 Corrected misleading output from -bv when -v was also used. Suppose the
+ address A is aliased to B and C, where B exists and C does not. Without
+ -v the output is "A verified" because verification stops after a
+ successful redirection if more than one address is generated. However,
+ with -v the child addresses are also verified. Exim was outputting "A
+ failed to verify" and then showing the successful verification for C,
+ with its parentage. It now outputs "B failed to verify", showing B's
+ parentage before showing the successful verification of C.
+
+PH/15 Applied Michael Deutschmann's patch to allow DNS black list processing to
+ look up a TXT record in a specific list after matching in a combined
+ list.
+
+PH/16 It seems that the options setting for the resolver (RES_DEFNAMES and
+ RES_DNSRCH) can affect the behaviour of gethostbyname() and friends when
+ they consult the DNS. I had assumed they would set it the way they
+ wanted; and indeed my experiments on Linux seem to show that in some
+ cases they do (I could influence IPv6 lookups but not IPv4 lookups).
+ To be on the safe side, however, I have now made the interface to
+ host_find_byname() similar to host_find_bydns(), with an argument
+ containing the DNS resolver options. The host_find_byname() function now
+ sets these options at its start, just as host_find_bydns() does. The smtp
+ transport options dns_qualify_single and dns_search_parents are passed to
+ host_find_byname() when gethostbyname=TRUE in this transport. Other uses
+ of host_find_byname() use the default settings of RES_DEFNAMES
+ (qualify_single) but not RES_DNSRCH (search_parents).
+
+PH/17 Applied (a modified version of) Nico Erfurth's patch to make
+ spool_read_header() do less string testing, by means of a preliminary
+ switch on the second character of optional "-foo" lines. (This is
+ overdue, caused by the large number of possibilities that now exist.
+ Originally there were few.) While I was there, I also converted the
+ str(n)cmp tests so they don't re-test the leading "-" and the first
+ character, in the hope this might squeeze out yet more improvement.
+
+PH/18 Two problems with "group" syntax in header lines when verifying: (1) The
+ flag allowing group syntax was set by the header_syntax check but not
+ turned off, possible causing trouble later; (2) The flag was not being
+ set at all for the header_verify test, causing "group"-style headers to
+ be rejected. I have now set it in this case, and also caused header_
+ verify to ignore an empty address taken from a group. While doing this, I
+ came across some other cases where the code for allowing group syntax
+ while scanning a header line wasn't quite right (mostly, not resetting
+ the flag correctly in the right place). These bugs could have caused
+ trouble for malformed header lines. I hope it is now all correct.
+
+PH/19 The functions {pwcheck,saslauthd}_verify_password() are always called
+ with the "reply" argument non-NULL. The code, however (which originally
+ came from elsewhere) had *some* tests for NULL when it wrote to *reply,
+ but it didn't always do it. This confused somebody who was copying the
+ code for some other use. I have removed all the tests.
+
+PH/20 It was discovered that the GnuTLS code had support for RSA_EXPORT, a
+ feature that was used to support insecure browsers during the U.S. crypto
+ embargo. It requires special client support, and Exim is probably the
+ only MTA that supported it -- and would never use it because real RSA is
+ always available. This code has been removed, because it had the bad
+ effect of slowing Exim down by computing (never used) parameters for the
+ RSA_EXPORT functionality.
+
+PH/21 On the advice of Timo Sirainen, added a check to the dovecot
+ authenticator to fail if there's a tab character in the incoming data
+ (there should never be unless someone is messing about, as it's supposed
+ to be base64-encoded). Also added, on Timo's advice, the "secured" option
+ if the connection is using TLS or if the remote IP is the same as the
+ local IP, and the "valid-client-cert option" if a client certificate has
+ been verified.
+
+PH/22 As suggested by Dennis Davis, added a server_condition option to *all*
+ authenticators. This can be used for authorization after authentication
+ succeeds. (In the case of plaintext, it servers for both authentication
+ and authorization.)
+
+PH/23 Testing for tls_required and lost_connection in a retry rule didn't work
+ if any retry times were supplied.
+
+PH/24 Exim crashed if verify=helo was activated during an incoming -bs
+ connection, where there is no client IP address to check. In this
+ situation, the verify now always succeeds.
+
+PH/25 Applied John Jetmore's -Mset patch.
+
+PH/26 Added -bem to be like -Mset, but loading a message from a file.
+
+PH/27 In a string expansion for a processed (not raw) header when multiple
+ headers of the same name were present, leading whitespace was being
+ removed from all of them, but trailing whitespace was being removed only
+ from the last one. Now trailing whitespace is removed from each header
+ before concatenation. Completely empty headers in a concatenation (as
+ before) are ignored.
+
+PH/28 Fixed bug in backwards-compatibility feature of PH/09 (thanks to John
+ Jetmore). It would have mis-read ACL variables from pre-4.61 spool files.
+
+PH/29 [Removed. This was a change that I later backed out, and forgot to
+ correct the ChangeLog entry (that I had efficiently created) before
+ committing the later change.]
+
+PH/30 Exim was sometimes attempting to deliver messages that had suffered
+ address errors (4xx response to RCPT) over the same connection as other
+ messages routed to the same hosts. Such deliveries are always "forced",
+ so retry times are not inspected. This resulted in far too many retries
+ for the affected addresses. The effect occurred only when there were more
+ hosts than the hosts_max_try setting in the smtp transport when it had
+ the 4xx errors. Those hosts that it had tried were not added to the list
+ of hosts for which the message was waiting, so if all were tried, there
+ was no problem. Two fixes have been applied:
+
+ (i) If there are any address or message errors in an SMTP delivery, none
+ of the hosts (tried or untried) are now added to the list of hosts
+ for which the message is waiting, so the message should not be a
+ candidate for sending over the same connection that was used for a
+ successful delivery of some other message. This seems entirely
+ reasonable: after all the message is NOT "waiting for some host".
+ This is so "obvious" that I'm not sure why it wasn't done
+ previously. Hope I haven't missed anything, but it can't do any
+ harm, as the worst effect is to miss an optimization.
+
+ (ii) If, despite (i), such a delivery is accidentally attempted, the
+ routing retry time is respected, so at least it doesn't keep
+ hammering the server.
+
+PH/31 Installed Andrew Findlay's patch to close the writing end of the socket
+ in ${readsocket because some servers need this prod.
+
+PH/32 Added some extra debug output when updating a wait-xxx database.
+
+PH/33 The hint "could be header name not terminated by colon", which has been
+ given for certain expansion errors for a long time, was not being given
+ for the ${if def:h_colon_omitted{... case.
+
+PH/34 The spec says: "With one important exception, whenever a domain list is
+ being scanned, $domain contains the subject domain." There was at least
+ one case where this was not true.
+
+PH/35 The error "getsockname() failed: connection reset by peer" was being
+ written to the panic log as well as the main log, but it isn't really
+ panic-worthy as it just means the connection died rather early on. I have
+ removed the panic log writing for the ECONNRESET error when getsockname()
+ fails.
+
+PH/36 After a 4xx response to a RCPT error, that address was delayed (in queue
+ runs only) independently of the message's sender address. This meant
+ that, if the 4xx error was in fact related to the sender, a different
+ message to the same recipient with a different sender could confuse
+ things. In particualar, this can happen when sending to a greylisting
+ server, but other circumstances could also provoke similar problems.
+ I have changed the default so that the retry time for these errors is now
+ based a combination of the sender and recipient addresses. This change
+ can be overridden by setting address_retry_include_sender=false in the
+ smtp transport.
+
+PH/37 For LMTP over TCP/IP (the smtp transport), error responses from the
+ remote server are returned as part of bounce messages. This was not
+ happening for LMTP over a pipe (the lmtp transport), but now it is the
+ same for both kinds of LMTP.
+
+PH/38 Despite being documented as not happening, Exim was rewriting addresses
+ in header lines that were in fact CNAMEs. This is no longer the case.
+
+PH/39 If -R or -S was given with -q<time>, the effect of -R or -S was ignored,
+ and queue runs started by the daemon processed all messages. This has
+ been fixed so that -R and -S can now usefully be given with -q<time>.
+
+PH/40 Import PCRE release 6.7 (fixes some bugs).
+
+PH/41 Add bitwise logical operations to eval (courtesy Brad Jorsch).
+
+PH/42 Give an error if -q is specified more than once.
+
+PH/43 Renamed the variables $interface_address and $interface_port as
+ $received_ip_address and $received_port, to make it clear that these
+ values apply to message reception, and not to the outgoing interface when
+ a message is delivered. (The old names remain recognized, of course.)
+
+PH/44 There was no timeout on the connect() call when using a Unix domain
+ socket in the ${readsocket expansion. There now is.
+
+PH/45 Applied a modified version of Brad Jorsch's patch to allow "message" to
+ be meaningful with "accept".
+
+SC/01 Eximstats V1.43
+ Bug fix for V1.42 with -h0 specified. Spotted by Chris Lear.
+
+SC/02 Eximstats V1.44
+ Use a glob alias rather than an array ref in the generated
+ parser. This improves both readability and performance.
+
+SC/03 Eximstats V1.45 (Marco Gaiarin / Steve Campbell)
+ Collect SpamAssassin and rejection statistics.
+ Don't display local sender or destination tables unless
+ there is data to show.
+ Added average volumes into the top table text output.
+
+SC/04 Eximstats V1.46
+ Collect data on the number of addresses (recipients)
+ as well as the number of messages.
+
+SC/05 Eximstats V1.47
+ Added 'Message too big' to the list of mail rejection
+ reasons (thanks to Marco Gaiarin).
+
+SC/06 Eximstats V1.48
+ Mainlog lines which have GMT offsets and are too short to
+ have a flag are now skipped.
+
+SC/07 Eximstats V1.49 (Alain Williams)
+ Added the -emptyok flag.
+
+SC/08 Eximstats V1.50
+ Fixes for obtaining the IP address from reject messages.
+
+JJ/03 exipick.20061117.2, made header handling as similar to exim as possible
+ (added [br]h_ prefixes, implemented RFC2047 decoding. Fixed
+ whitesspace changes from 4.64-PH/27
+
+JJ/04 exipick.20061117.2, fixed format and added $message_headers_raw to
+ match 4.64-PH/13
+
+JJ/05 exipick.20061117.2, bug fixes (error out sooner when invalid criteria
+ are found, allow negative numbers in numeric criteria)
+
+JJ/06 exipick.20061117.2, added new $message_body_missing variable
+
+JJ/07 exipick.20061117.2, added $received_ip_address and $received_port
+ to match changes made in 4.64-PH/43
+
+PH/46 Applied Jori Hamalainen's patch to add features to exiqsumm.
+
+PH/47 Put in an explicit test for a DNS lookup of an address record where the
+ "domain" is actually an IP address, and force a failure. This locks out
+ those revolvers/nameservers that support "A-for-A" lookups, in
+ contravention of the specifications.
+
+PH/48 When a host name was looked up from an IP address, and the subsequent
+ forward lookup of the name timed out, the host name was left in
+ $sender_host_name, contrary to the specification.
+
+PH/49 Although default lookup types such as lsearch* or cdb*@ have always been
+ restricted to single-key lookups, Exim was not diagnosing an error if
+ * or *@ was used with a query-style lookup.
+
+PH/50 Increased the value of DH_BITS in tls-gnu.c from 768 to 1024.
+
+MH/01 local_scan ABI version incremented to 1.1. It should have been updated
+ long ago, but noone interested enough thought of it. Let's just say that
+ the "1.1" means that there are some new functions that weren't there at
+ some point in the past.
+
+PH/51 Error processing for expansion failure of helo_data from an smtp
+ transport during callout processing was broken.
+
+PH/52 Applied John Jetmore's patch to allow tls-on-connect and STARTTLS to be
+ tested/used via the -bh/-bhc/-bs options.
+
+PH/53 Added missing "#include <time.h>" to pcre/pcretest.c (this was a PCRE
+ bug, fixed in subsequent PCRE releases).
+
+PH/54 Applied Robert Bannocks' patch to avoid a problem with references that
+ arises when using the Solaris LDAP libraries (but not with OpenLDAP).
+
+PH/55 Check for a ridiculously long file name in exim_dbmbuild.
+
+
Exim version 4.63
-----------------
and :defer: in a redirect router. Add forbid_smtp_code to suppress the
latter.
-PH/17 Added an extra condition to the default value of delay_warning_condition
+PH/17 Added extra conditions to the default value of delay_warning_condition
so that it is now:
- ${if or {
- { match{$h_precedence:}{(?i)bulk|list|junk} }
- { match{$h_auto-submitted:}{(?i)auto-generated|auto-replied} }
+ ${if or { \
+ { !eq{$h_list-id:$h_list-post:$h_list-subscribe:}{} } \
+ { match{$h_precedence:}{(?i)bulk|list|junk} } \
+ { match{$h_auto-submitted:}{(?i)auto-generated|auto-replied} } \
}{no}{yes}}
- The Auto-Submitted: header is standardised, whereas I don't think
- Precedence: ever was.
+ The Auto-Submitted: and various List- headers are standardised, whereas I
+ don't think Precedence: ever was.
PH/18 Refactored debugging code in route_finduser() to show more information,
in particular, the error code if getpwnam() issues one.
tests for valid domains and recipients precede the DNS black list and CSA
tests, on the grounds that those ones are more expensive.
+PH/25 Exim was not testing for a space following SMTP commands such as EHLO
+ that require one. Thus, EHLORHUBARB was interpreted as a valid command.
+ This bug exists in every version of Exim that I still have, right back to
+ 0.12.
+
+PH/26 (n)wildlsearch lookups are documented as being done case-insensitively.
+ However, an attempt to turn on case-sensitivity in a regex key by
+ including (?-i) didn't work because the subject string was already
+ lowercased, and the effects were non-intuitive. It turns out that a
+ one-line patch can be used to allow (?-i) to work as expected.
+
Exim version 4.62
-----------------
git://git.exim.org / exim.git / blobdiff