. Update the Copyright year (only) when changing content.
. /////////////////////////////////////////////////////////////////////////////
-.set previousversion "4.91"
+.set previousversion "4.92"
.include ./local_params
.set ACL "access control lists (ACLs)"
.section "Exim documentation" "SECID1"
. Keep this example change bar when updating the documentation!
-.new
.cindex "documentation"
This edition of the Exim specification applies to version &version() of Exim.
Substantive changes from the &previousversion; edition are marked in some
renditions of this document; this paragraph is so marked if the rendition is
capable of showing a change indicator.
-.wen
This document is very much a reference manual; it is not a tutorial. The reader
is expected to have some familiarity with the SMTP mail transfer protocol and
The SIGHUP signal
.cindex "SIGHUP"
.cindex "daemon" "restarting"
+.cindex signal "to reload configuration"
+.cindex daemon "reload configuration"
can be used to cause the daemon to re-execute itself. This should be done
whenever Exim's configuration file, or any file that is incorporated into it by
means of the &%.include%& facility, is changed, and also whenever a new version
of all debug output lines. This can be useful when trying to track down delays
in processing.
-.new
.cindex debugging "UTF-8 in"
.cindex UTF-8 "in debug output"
The &`noutf8`& selector disables the use of
UTF-8 line-drawing characters to group related information.
When disabled. ascii-art is used instead.
Using the &`+all`& option does not set this modifier,
-.wen
If the &%debug_print%& option is set in any driver, it produces output whenever
any debugging is selected, or if &%-v%& is used.
&*Warning 2*&: In a host list, you must always use &(net-iplsearch)& so that
the implicit key is the host's IP address rather than its name (see section
&<<SECThoslispatsikey>>&).
+
+.new
+&*Warning 3*&: Do not use an IPv4-mapped IPv6 address for a key; use the
+IPv4, in dotted-quad form. (Exim converts IPv4-mapped IPv6 addresses to this
+notation before executing the lookup.)
+.wen
+.next
+.new
+.cindex lookup json
+.cindex json "lookup type"
+.cindex JSON expansions
+&(json)&: The given file is a text file with a JSON structure.
+An element of the structure is extracted, defined by the search key.
+The key is a list of subelement selectors
+(colon-separated by default but changeable in the usual way)
+which are applied in turn to select smaller and smaller portions
+of the JSON structure.
+If a selector is numeric, it must apply to a JSON array; the (zero-based)
+nunbered array element is selected.
+Otherwise it must apply to a JSON object; the named element is selected.
+The final resulting element can be a simple JSON type or a JSON object
+or array; for the latter two a string-representation os the JSON
+is returned.
+For elements of type string, the returned value is de-quoted.
+.wen
.next
.cindex "linear search"
.cindex "lookup" "lsearch"
recently implemented &(iplsearch)& files do require colons in IPv6 keys
(notated using the quoting facility) so as to distinguish them from IPv4 keys.
For this reason, when the lookup type is &(iplsearch)&, IPv6 addresses are
-converted using colons and not dots. In all cases, full, unabbreviated IPv6
+converted using colons and not dots.
+.new
+In all cases except IPv4-mapped IPv6, full, unabbreviated IPv6
addresses are always used.
+The latter are converted to IPv4 addresses, in dotted-quad form.
+.wen
Ideally, it would be nice to tidy up this anomalous situation by changing to
colons in all cases, given that quoting is now available for &(lsearch)&.
them are expanded every time they are used; others are expanded only once.
When a string is being expanded it is copied verbatim from left to right except
+.cindex expansion "string concatenation"
when a dollar or backslash character is encountered. A dollar specifies the
start of a portion of the string that is interpreted and replaced as described
below in section &<<SECTexpansionitems>>& onwards. Backslash is used as an
This forces an expansion failure (see section &<<SECTforexpfai>>&);
{<&'string2'&>} must be present for &"fail"& to be recognized.
-.new
.vitem "&*${extract json{*&<&'key'&>&*}{*&<&'string1'&>&*}{*&<&'string2'&>&*}&&&
+ {*&<&'string3'&>&*}}*&" &&&
+ "&*${extract jsons{*&<&'key'&>&*}{*&<&'string1'&>&*}{*&<&'string2'&>&*}&&&
{*&<&'string3'&>&*}}*&"
.cindex "expansion" "extracting from JSON object"
.cindex JSON expansions
The braces, commas and colons, and the quoting of the member name are required;
the spaces are optional.
Matching of the key against the member names is done case-sensitively.
+For the &"json"& variant,
+if a returned value is a JSON string, it retains its leading and
+trailing quotes.
+.new
+For the &"jsons"& variant, which is intended for use with JSON strings, the
+leading and trailing quotes are removed from the returned value.
+.wen
. XXX should be a UTF-8 compare
The results of matching are handled as above.
-.wen
.vitem "&*${extract{*&<&'number'&>&*}{*&<&'separators'&>&*}&&&
empty (for example, the fifth field above).
-.new
-.vitem "&*${extract json{*&<&'number'&>&*}}&&&
+.vitem "&*${extract json {*&<&'number'&>&*}}&&&
+ {*&<&'string1'&>&*}{*&<&'string2'&>&*}{*&<&'string3'&>&*}}*&" &&&
+ "&*${extract jsons{*&<&'number'&>&*}}&&&
{*&<&'string1'&>&*}{*&<&'string2'&>&*}{*&<&'string3'&>&*}}*&"
.cindex "expansion" "extracting from JSON array"
.cindex JSON expansions
Field selection and result handling is as above;
there is no choice of field separator.
+For the &"json"& variant,
+if a returned value is a JSON string, it retains its leading and
+trailing quotes.
+.new
+For the &"jsons"& variant, which is intended for use with JSON strings, the
+leading and trailing quotes are removed from the returned value.
.wen
.code
${readsocket{/socket/name}{request string}{3s:shutdown=no}}
.endd
-.new
The second, tls, controls the use of TLS on the connection. Example:
.code
${readsocket{/socket/name}{request string}{3s:tls=yes}}
.endd
The default is to not use TLS.
If it is enabled, a shutdown as descripbed above is never done.
-.wen
A fourth argument allows you to change any newlines that are in the data
that is read, in the same way as for &%readfile%& (see above). This example
returns the SHA-1 hash fingerprint of the certificate.
-.vitem &*${sha256:*&<&'string'&>&*}*&
+.vitem &*${sha256:*&<&'string'&>&*}*& &&&
+ &*${sha2:*&<&'string'&>&*}*& &&&
+ &*${sha2_<n>:*&<&'string'&>&*}*&
.cindex "SHA-256 hash"
+.cindex "SHA-2 hash"
.cindex certificate fingerprint
.cindex "expansion" "SHA-256 hashing"
.cindex "&%sha256%& expansion item"
+.cindex "&%sha2%& expansion item"
The &%sha256%& operator computes the SHA-256 hash value of the string
and returns
it as a 64-digit hexadecimal number, in which any letters are in upper case.
If the string is a single variable of type certificate,
returns the SHA-256 hash fingerprint of the certificate.
+.new
+The operator can also be spelled &%sha2%& and does the same as &%sha256%&
+(except for certificates, which are not supported).
+Finally, if an underbar
+and a number is appended it specifies the output length, selecting a
+member of the SHA-2 family of hash functions.
+Values of 256, 384 and 512 are accepted, with 256 being the default.
+.wen
+
.vitem &*${sha3:*&<&'string'&>&*}*& &&&
&*${sha3_<n>:*&<&'string'&>&*}*&
.cindex "expansion" "utf-8 forcing"
.cindex "&%utf8clean%& expansion item"
This replaces any invalid utf-8 sequence in the string by the character &`?`&.
-.new
In versions of Exim before 4.92, this did not correctly do so for a truncated
final codepoint's encoding, and the character would be silently dropped.
If you must handle detection of this scenario across both sets of Exim behavior,
.endd
(which will false-positive if the first character of the local part is a
literal question mark).
-.wen
.vitem "&*${utf8_domain_to_alabel:*&<&'string'&>&*}*&" &&&
"&*${utf8_domain_from_alabel:*&<&'string'&>&*}*&" &&&
To scan a named list, expand it with the &*listnamed*& operator.
+.new
+.vitem "&*forall_json{*&<&'a JSON array'&>&*}{*&<&'a condition'&>&*}*&" &&&
+ "&*forany_json{*&<&'a JSON array'&>&*}{*&<&'a condition'&>&*}*&" &&&
+ "&*forall_jsons{*&<&'a JSON array'&>&*}{*&<&'a condition'&>&*}*&" &&&
+ "&*forany_jsons{*&<&'a JSON array'&>&*}{*&<&'a condition'&>&*}*&"
+.cindex JSON "iterative conditions"
+.cindex JSON expansions
+.cindex expansion "&*forall_json*& condition"
+.cindex expansion "&*forany_json*& condition"
+.cindex expansion "&*forall_jsons*& condition"
+.cindex expansion "&*forany_jsons*& condition"
+As for the above, except that the first argument must, after expansion,
+be a JSON array.
+The array separator is not changeable.
+For the &"jsons"& variants the elements are expected to be JSON strings
+and have their quotes removed before the evaluation of the condition.
+.wen
+
+
.vitem &*ge&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
&*gei&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
The first character is a major version number, currently 4.
Then after a dot, the next group of digits is a minor version number.
There may be other characters following the minor version.
+This value may be overridden by the &%exim_version%& main config option.
.vitem &$header_$&<&'name'&>
This is not strictly an expansion variable. It is expansion syntax for
but in the context of an outward SMTP delivery taking place via the &(smtp)& transport
becomes the same as &$tls_out_cipher$&.
+.new
+.vitem &$tls_in_cipher_std$&
+.vindex "&$tls_in_cipher_std$&"
+As above, but returning the RFC standard name for the cipher suite.
+.wen
+
.vitem &$tls_out_cipher$&
.vindex "&$tls_out_cipher$&"
This variable is
&<<CHAPTLS>>& for details of TLS support and chapter &<<CHAPsmtptrans>>& for
details of the &(smtp)& transport.
+,new
+.vitem &$tls_out_cipher_std$&
+.vindex "&$tls_out_cipher_std$&"
+As above, but returning the RFC standard name for the cipher suite.
+.wen
+
.vitem &$tls_out_dane$&
.vindex &$tls_out_dane$&
DANE active status. See section &<<SECDANE>>&.
.vitem &$version_number$&
.vindex "&$version_number$&"
-The version number of Exim.
+The version number of Exim. Same as &$exim_version$&, may be overridden
+by the &%exim_version%& main config option.
.vitem &$warn_message_delay$&
.vindex "&$warn_message_delay$&"
.row &%ignore_fromline_hosts%& "allow &""From ""& from these hosts"
.row &%ignore_fromline_local%& "allow &""From ""& from local SMTP"
.row &%pipelining_advertise_hosts%& "advertise pipelining to these hosts"
+.row &%pipelining_connect_advertise_hosts%& "advertise pipelining to these hosts"
.row &%prdr_enable%& "advertise PRDR to all hosts"
.row &%smtputf8_advertise_hosts%& "advertise SMTPUTF8 to these hosts"
.row &%tls_advertise_hosts%& "advertise TLS to these hosts"
reversed and looked up in the reverse DNS, as described in more detail in
section &<<SECTverifyCSA>>&.
-.new
.option dns_cname_loops main integer 1
.cindex DNS "CNAME following"
This option controls the following of CNAME chains, needed if the resolver does
The default value of one CNAME-follow is needed
thanks to the observed return for an MX request,
given no MX presence but a CNAME to an A, of the CNAME.
-.wen
.option dns_dnssec_ok main integer -1
This is a fudge to help with name servers that give big delays or otherwise do
not work for the AAAA record type. In due course, when the world's name
servers have all been upgraded, there should be no need for this option.
+.new
+Note that all lookups, including those done for verification, are affected;
+this will result in verify failure for IPv6 connections or ones using names
+only valid for IPv6 addresses.
+.wen
.option dns_retrans main time 0s
used. See chapter &<<CHAPsecurity>>& for a discussion of security issues.
+.option exim_version main string "current version"
+.cindex "Exim version"
+.cindex customizing "version number"
+.cindex "version number of Exim" override
+This option allows to override the &$version_number$&/&$exim_version$& Exim reports in
+various places. Use with care, this may fool stupid security scanners.
+
+
.option extra_local_interfaces main "string list" unset
This option defines network interfaces that are to be considered local when
routing, but which are not used for listening by the daemon. See section
transport driver.
-.option openssl_options main "string list" "+no_sslv2 +single_dh_use +no_ticket"
+.option openssl_options main "string list" "+no_sslv2 +no_sslv3 +single_dh_use +no_ticket"
.cindex "OpenSSL "compatibility options"
This option allows an administrator to adjust the SSL options applied
by OpenSSL to connections. It is given as a space-separated list of items,
that clients will use it; &"out of order"& commands that are &"expected"& do
not count as protocol errors (see &%smtp_max_synprot_errors%&).
+.new
+.option pipelining_connect_advertise_hosts main "host list&!!" *
+.cindex "pipelining" "early connection"
+.cindex "pipelining" PIPE_CONNECT
+If Exim is built with the SUPPORT_PIPE_CONNECT build option
+this option controls which hosts the facility is advertised to
+and from which pipeline early-connection (before MAIL) SMTP
+commands are acceptable.
+When used, the pipelining saves on roundtrip times.
+
+Currently the option name &"X_PIPE_CONNECT"& is used.
+.wen
+
.option prdr_enable main boolean false
.cindex "PRDR" "enabling on server"
used. If the expansion yields an empty string, no &'Received:'& header line is
added to the message. Otherwise, the string should start with the text
&"Received:"& and conform to the RFC 2822 specification for &'Received:'&
-header lines. The default setting is:
+header lines.
+.new
+The default setting is:
.code
received_header_text = Received: \
${if def:sender_rcvhost {from $sender_rcvhost\n\t}\
- {${if def:sender_ident \
- {from ${quote_local_part:$sender_ident} }}\
- ${if def:sender_helo_name {(helo=$sender_helo_name)\n\t}}}}\
+ {${if def:sender_ident \
+ {from ${quote_local_part:$sender_ident} }}\
+ ${if def:sender_helo_name {(helo=$sender_helo_name)\n\t}}}}\
by $primary_hostname \
- ${if def:received_protocol {with $received_protocol}} \
- ${if def:tls_in_cipher {($tls_in_cipher)\n\t}}\
+ ${if def:received_protocol {with $received_protocol }}\
+ ${if def:tls_in_cipher_std { tls $tls_in_cipher_std\n\t}}\
(Exim $version_number)\n\t\
${if def:sender_address \
{(envelope-from <$sender_address>)\n\t}}\
id $message_exim_id\
${if def:received_for {\n\tfor $received_for}}
.endd
+.wen
The reference to the TLS cipher is omitted when Exim is built without TLS
support. The use of conditional expansions ensures that this works for both
option in the relevant &(smtp)& transport.
&*Note*&: If you use filenames based on IP addresses, change the list
-separator in the usual way (&<<SECTlistsepchange>>&) >to avoid confusion under IPv6.
+separator in the usual way (&<<SECTlistsepchange>>&) to avoid confusion under IPv6.
&*Note*&: Under versions of OpenSSL preceding 1.1.1,
when a list of more than one
.cindex "filter" "transport filter"
.vindex "&$pipe_addresses$&"
Special handling takes place when an argument consists of precisely the text
-&`$pipe_addresses`&. This is not a general expansion variable; the only
+&`$pipe_addresses`& (no quotes).
+This is not a general expansion variable; the only
place this string is recognized is when it appears as an argument for a pipe or
transport filter command. It causes each address that is being handled to be
inserted in the argument list at that point &'as a separate argument'&. This
avoids any problems with spaces or shell metacharacters, and is of use when a
&(pipe)& transport is handling groups of addresses in a batch.
-If &%force_command%& is enabled on the transport, Special handling takes place
+If &%force_command%& is enabled on the transport, special handling takes place
for an argument that consists of precisely the text &`$address_pipe`&. It
is handled similarly to &$pipe_addresses$& above. It is expanded and each
argument is inserted in the argument list at that point
Exim will not use the SMTP PIPELINING extension when delivering to any host
that matches this list, even if the server host advertises PIPELINING support.
+.new
+.option hosts_pipe_connect smtp "host list&!!" unset
+.cindex "pipelining" "early connection"
+.cindex "pipelining" PIPE_CONNECT
+If Exim is built with the SUPPORT_PIPE_CONNECT build option
+this option controls which to hosts the facility watched for
+and recorded, and used for subsequent connections.
+
+The retry hints database is used for the record,
+and records are subject to the &%retry_data_expire%& option.
+When used, the pipelining saves on roundtrip times.
+It also turns SMTP into a client-first protocol
+so combines well with TCP Fast Open.
+
+Note:
+When the facility is used, the transport &%helo_data%& option
+will be expanded before the &$sending_ip_address$& variable
+is filled in.
+A check is made for the use of that variable, without the
+presence of a &"def:"& test on it, but suitably complex coding
+can avoid the check and produce unexpected results.
+You have been warned.
+.wen
+
.option hosts_avoid_tls smtp "host list&!!" unset
.cindex "TLS" "avoiding for certain hosts"
message on the same connection. See section &<<SECTmulmessam>>& for an
explanation of when this might be needed.
-.option hosts_noproxy_tls smtp "host list&!!" *
+.new
+.option hosts_noproxy_tls smtp "host list&!!" unset
.cindex "TLS" "passing connection"
.cindex "multiple SMTP deliveries"
.cindex "TLS" "multiple message deliveries"
For any host that matches this list, a TLS session which has
been started will not be passed to a new delivery process for sending another
message on the same session.
+.wen
The traditional implementation closes down TLS and re-starts it in the new
process, on the same open TCP connection, for each successive message
CHUNKING support, Exim will attempt to use BDAT commands rather than DATA.
BDAT will not be used in conjunction with a transport filter.
-.option hosts_try_dane smtp "host list&!!" unset
+.option hosts_try_dane smtp "host list&!!" *
.cindex DANE "transport options"
.cindex DANE "attempting for certain servers"
If built with DANE support, Exim will lookup a
there will be no fallback to in-clear communication.
See section &<<SECDANE>>&.
-.option hosts_try_fastopen smtp "host list&!!" unset
+.option hosts_try_fastopen smtp "host list&!!" *
.cindex "fast open, TCP" "enabling, in client"
.cindex "TCP Fast Open" "enabling, in client"
.cindex "RFC 7413" "TCP Fast Open"
If the expansion fails, or if a port number cannot be found, delivery
is deferred.
-.new
Note that at least one Linux distribution has been seen failing
to put &"smtps"& in its &"/etc/services"& file, resulting is such deferrals.
-.wen
If this option is set to &"smtps"&, the default value for the &%port%& option
changes to &"smtps"&, and the transport initiates TLS immediately after
connecting, as an outbound SSL-on-connect, instead of using STARTTLS to upgrade.
-.new
The Internet standards bodies used to strongly discourage use of this mode,
but as of RFC 8314 it is perferred over STARTTLS for message submission
(as distinct from MTA-MTA communication).
-.wen
.option retry_include_ip_address smtp boolean&!! true
If both this option and &%tls_try_verify_hosts%& are unset
operation is as if this option selected all hosts.
-.new
.option utf8_downconvert smtp integer!! unset
.cindex utf8 "address downconversion"
.cindex i18n "utf8 address downconversion"
this option controls conversion of UTF-8 in message addresses
to a-label form.
For details see section &<<SECTi18nMTA>>&.
-.wen
AUTH_CRAM_MD5=yes
AUTH_CYRUS_SASL=yes
AUTH_DOVECOT=yes
+AUTH_EXTERNAL=yes
AUTH_GSASL=yes
AUTH_HEIMDAL_GSSAPI=yes
AUTH_PLAINTEXT=yes
the Cyrus SASL authentication library.
The third is an interface to Dovecot's authentication system, delegating the
work via a socket interface.
-The fourth provides an interface to the GNU SASL authentication library, which
+.new
+The fourth provides for negotiation of authentication done via non-SMTP means,
+as defined by RFC 4422 Appendix A.
+.wen
+The fifth provides an interface to the GNU SASL authentication library, which
provides mechanisms but typically not data sources.
-The fifth provides direct access to Heimdal GSSAPI, geared for Kerberos, but
+The sixth provides direct access to Heimdal GSSAPI, geared for Kerberos, but
supporting setting a server keytab.
-The sixth can be configured to support
+The seventh can be configured to support
the PLAIN authentication mechanism (RFC 2595) or the LOGIN mechanism, which is
-not formally documented, but used by several MUAs. The seventh authenticator
+not formally documented, but used by several MUAs.
+The eighth authenticator
supports Microsoft's &'Secure Password Authentication'& mechanism.
-The eighth is an Exim authenticator but not an SMTP one;
+The last is an Exim authenticator but not an SMTP one;
instead it can use information from a TLS negotiation.
The authenticators are configured using the same syntax as other drivers (see
+. ////////////////////////////////////////////////////////////////////////////
+. ////////////////////////////////////////////////////////////////////////////
+
+.chapter "The external authenticator" "CHAPexternauth"
+.scindex IIDexternauth1 "&(external)& authenticator"
+.scindex IIDexternauth2 "authenticators" "&(external)&"
+.cindex "authentication" "Client Certificate"
+.cindex "authentication" "X509"
+.cindex "Certificate-based authentication"
+The &(external)& authenticator provides support for
+authentication based on non-SMTP information.
+The specification is in RFC 4422 Appendix A
+(&url(https://tools.ietf.org/html/rfc4422)).
+It is only a transport and negotiation mechanism;
+the process of authentication is entirely controlled
+by the server configuration.
+
+The client presents an identity in-clear.
+It is probably wise for a server to only advertise,
+and for clients to only attempt,
+this authentication method on a secure (eg. under TLS) connection.
+
+One possible use, compatible with the
+K-9 Mail Andoid client (&url(https://k9mail.github.io/)),
+is for using X509 client certificates.
+
+It thus overlaps in function with the TLS authenticator
+(see &<<CHAPtlsauth>>&)
+but is a full SMTP SASL authenticator
+rather than being implicit for TLS-connection carried
+client certificates only.
+
+The examples and discussion in this chapter assume that
+client-certificate authentication is being done.
+
+The client must present a certificate,
+for which it must have been requested via the
+&%tls_verify_hosts%& or &%tls_try_verify_hosts%& main options
+(see &<<CHAPTLS>>&).
+For authentication to be effective the certificate should be
+verifiable against a trust-anchor certificate known to the server.
+
+.section "External options" "SECTexternsoptions"
+.cindex "options" "&(external)& authenticator (server)"
+The &(external)& authenticator has two server options:
+
+.option server_param2 external string&!! unset
+.option server_param3 external string&!! unset
+.cindex "variables (&$auth1$& &$auth2$& etc)" "in &(external)& authenticator"
+These options are expanded before the &%server_condition%& option
+and the result are placed in &$auth2$& and &$auth3$& resectively.
+If the expansion is forced to fail, authentication fails. Any other expansion
+failure causes a temporary error code to be returned.
+
+They can be used to clarify the coding of a complex &%server_condition%&.
+
+.section "Using external in a server" "SECTexternserver"
+.cindex "AUTH" "in &(external)& authenticator"
+.cindex "numerical variables (&$1$& &$2$& etc)" &&&
+ "in &(external)& authenticator"
+.vindex "&$auth1$&, &$auth2$&, etc"
+.cindex "base64 encoding" "in &(external)& authenticator"
+
+When running as a server, &(external)& performs the authentication test by
+expanding a string. The data sent by the client with the AUTH command, or in
+response to subsequent prompts, is base64 encoded, and so may contain any byte
+values when decoded. The decoded value is treated as
+an identity for authentication and
+placed in the expansion variable &$auth1$&.
+
+For compatibility with previous releases of Exim, the value is also placed in
+the expansion variable &$1$&. However, the use of this
+variable for this purpose is now deprecated, as it can lead to confusion in
+string expansions that also use them for other things.
+
+.vindex "&$authenticated_id$&"
+Once an identity has been received,
+&%server_condition%& is expanded. If the expansion is forced to fail,
+authentication fails. Any other expansion failure causes a temporary error code
+to be returned. If the result of a successful expansion is an empty string,
+&"0"&, &"no"&, or &"false"&, authentication fails. If the result of the
+expansion is &"1"&, &"yes"&, or &"true"&, authentication succeeds and the
+generic &%server_set_id%& option is expanded and saved in &$authenticated_id$&.
+For any other result, a temporary error code is returned, with the expanded
+string as the error text.
+
+Example:
+.code
+ext_ccert_san_mail:
+ driver = external
+ public_name = EXTERNAL
+
+ server_advertise_condition = $tls_in_certificate_verified
+ server_param2 = ${certextract {subj_altname,mail,>:} \
+ {$tls_in_peercert}}
+ server_condition = ${if forany {$auth2} \
+ {eq {$item}{$auth1}}}
+ server_set_id = $auth1
+.endd
+This accepts a client certificate that is verifiable against any
+of your configured trust-anchors
+(which usually means the full set of public CAs)
+and which has a mail-SAN matching the claimed identity sent by the client.
+
+Note that, up to TLS1.2, the client cert is on the wire in-clear, including the SAN,
+The account name is therefore guessable by an opponent.
+TLS 1.3 protects both server and client certificates, and is not vulnerable
+in this way.
+Likewise, a traditional plaintext SMTP AUTH done inside TLS is not.
+
+
+.section "Using external in a client" "SECTexternclient"
+.cindex "options" "&(external)& authenticator (client)"
+The &(external)& authenticator has one client option:
+
+.option client_send external string&!! unset
+This option is expanded and sent with the AUTH command as the
+identity being asserted.
+
+Example:
+.code
+ext_ccert:
+ driver = external
+ public_name = EXTERNAL
+
+ client_condition = ${if !eq{$tls_out_cipher}{}}
+ client_send = myaccount@smarthost.example.net
+.endd
+
+
+.ecindex IIDexternauth1
+.ecindex IIDexternauth2
+
+
+
+
+
. ////////////////////////////////////////////////////////////////////////////
. ////////////////////////////////////////////////////////////////////////////
.oindex "&%tls_require_ciphers%&" "OpenSSL"
There is a function in the OpenSSL library that can be passed a list of cipher
suites before the cipher negotiation takes place. This specifies which ciphers
-.new
are acceptable for TLS versions prior to 1.3.
-.wen
The list is colon separated and may contain names like
DES-CBC3-SHA. Exim passes the expanded value of &%tls_require_ciphers%&
directly to this function call.
tls_require_ciphers = ECDSA:RSA:!COMPLEMENTOFDEFAULT
.endd
-.new
For TLS version 1.3 the control available is less fine-grained
and Exim does not provide access to it at present.
The value of the &%tls_require_ciphers%& option is ignored when
.code
TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256
.endd
-.wen
.section "Requiring specific ciphers or other parameters in GnuTLS" &&&
-.section "Configuring an Exim client to use TLS" "SECID185"
+.section "Configuring an Exim client to use TLS" "SECTclientTLS"
.cindex "cipher" "logging"
.cindex "log" "TLS cipher"
.cindex "log" "distinguished name"
all of which point to a single TLSA record.
DANE-TA and DANE-EE can both be used together.
-.new
Our recommendation is to use DANE with a certificate from a public CA,
because this enables a variety of strategies for remote clients to verify
your certificate.
If you're not already using a private CA, or it doesn't meet these
requirements, then we encourage you to avoid all these issues and use a public
CA such as &url(https://letsencrypt.org/,Let's Encrypt) instead.
-.wen
The TLSA record should have a Selector field of SPKI(1) and a Matching Type field of SHA2-512(2).
For use with the DANE-TA model, server certificates must have a correct name (SubjectName or SubjectAltName).
-.new
The Certificate issued by the CA published in the DANE-TA model should be
issued using a strong hash algorithm.
Exim, and importantly various other MTAs sending to you, will not
libraries.
This means no MD5 and no SHA-1. SHA2-256 is the minimum for reliable
interoperability (and probably the maximum too, in 2018).
-.wen
The use of OCSP-stapling should be considered, allowing for fast revocation of certificates (which would otherwise
be limited by the DNS TTL on the TLSA records). However, this is likely to only be usable with DANE-TA. NOTE: the
attempt to verify the HELO/EHLO contents, it is carried out when this
condition is encountered. See the description of the &%helo_verify_hosts%& and
&%helo_try_verify_hosts%& options for details of how to request verification
-independently of this condition.
+independently of this condition, and for detail of the verification.
For SMTP input that does not come over TCP/IP (the &%-bs%& command line
option), this condition is always true.
-.vitem &*verify&~=&~not_blind*&
+.vitem &*verify&~=&~not_blind/*&<&'options'&>
.cindex "verifying" "not blind"
.cindex "bcc recipients, verifying none"
This condition checks that there are no blind (bcc) recipients in the message.
&'Resent-Cc:'& header lines exist, they are also checked. This condition can be
used only in a DATA or non-SMTP ACL.
+.new
+There is one possible option, &`case_insensitive`&. If this is present then
+local parts are checked case-insensitively.
+.wen
+
There are, of course, many legitimate messages that make use of blind (bcc)
recipients. This check should not be used on its own for blocking messages.
The &%leaky%& (default) option means that the client's recorded rate is not
updated if it is above the limit. The effect of this is that Exim measures the
client's average rate of successfully sent email,
-.new
up to the given limit.
This is appropriate if the countermeasure when the condition is true
consists of refusing the message, and
is generally the better choice if you have clients that retry automatically.
If the action when true is anything more complex then this option is
likely not what is wanted.
-.wen
The &%strict%& option means that the client's recorded rate is always
updated. The effect of this is that Exim measures the client's average rate
The main use of these variables is expected to be to distinguish between
rejections of MAIL and rejections of RCPT in callouts.
-.new
The above variables may also be set after a &*successful*&
address verification to:
.ilist
&%random%&: A random local-part callout succeeded
.endlist
-.wen
you must set the &%spamd_address%& option in the global part of the Exim
configuration as follows (example):
.code
-spamd_address = 192.168.99.45 387
+spamd_address = 192.168.99.45 783
.endd
The SpamAssassin protocol relies on a TCP half-close from the client.
If your SpamAssassin client side is running a Linux system with an
.cindex "&[local_scan()]& function" "building Exim to use"
To make use of the local scan function feature, you must tell Exim where your
function is before building Exim, by setting
-.new
both HAVE_LOCAL_SCAN and
-.wen
LOCAL_SCAN_SOURCE in your
&_Local/Makefile_&. A recommended place to put it is in the &_Local_&
directory, so you might set
&`F `& sender address (on delivery lines)
&`H `& host name and IP address
&`I `& local interface used
-&`id `& message id for incoming message
+&`id `& message id (from header) for incoming message
&`K `& CHUNKING extension used
&`L `& on &`<=`& and &`=>`& lines: PIPELINING extension used
&`M8S `& 8BITMIME status for incoming message
&` incoming_port `& remote port on <= lines
&`*lost_incoming_connection `& as it says (includes timeouts)
&` millisec `& millisecond timestamps and RT,QT,DT,D times
+&`*msg_id `& on <= lines, Message-ID: header value
+&` msg_id_created `& on <= lines, Message-ID: header value when one had to be added
&` outgoing_interface `& local interface on => lines
&` outgoing_port `& add remote port to => lines
&`*queue_run `& start and end queue runs
&%millisec%&: Timestamps have a period and three decimal places of finer granularity
appended to the seconds value.
.next
+.new
+.cindex "log" "message id"
+&%msg_id%&: The value of the Message-ID: header.
+.next
+&%msg_id_created%&: The value of the Message-ID: header, when one had to be created.
+This will be either because the message is a bounce, or was submitted locally
+(submission mode) without one.
+The field identifier will have an asterix appended: &"id*="&.
+.wen
+.next
.cindex "log" "outgoing interface"
.cindex "log" "local interface"
.cindex "log" "local address and port"
&%pid%&: The current process id is added to every log line, in square brackets,
immediately after the time and date.
.next
-.new
.cindex log pipelining
.cindex pipelining "logging outgoing"
&%pipelining%&: A field is added to delivery and accept
On accept lines, where PIPELINING was offered but not used by the client,
the field has a minus appended.
+
+.new
+.cindex "pipelining" "early connection"
+If Exim is built with the SUPPORT_PIPE_CONNECT build option
+accept "L" fields have a period appended if the feature was
+offered but not used, or an asterisk appended if used.
+Delivery "L" fields have an asterisk appended if used.
+.wen
+
.next
.cindex "log" "queue run"
.cindex "queue runner" "logging"
.vitem &*-x*&
Match only non-frozen messages.
+
+.new
+.vitem &*-G*&&~<&'queuename'&>
+Match only messages in the given queue. Without this, the default queue is searched.
+.wen
.endlist
The following options control the format of the output:
is insurance against disk crashes where the directory is lost but the files
themselves are recoverable.
-.new
The file formats may be changed, or new formats added, at any release.
Spool files are not intended as an interface to other programs
and should not be used as such.
-.wen
Some people are tempted into editing -D files in order to modify messages. You
need to be extremely careful if you do this; it is not recommended and you are
.cindex "DKIM" "signing"
For signing to be usable you must have published a DKIM record in DNS.
-Note that RFC 8301 says:
+Note that RFC 8301 (which does not cover EC keys) says:
.code
rsa-sha1 MUST NOT be used for signing or verifying.
.option dkim_domain smtp string list&!! unset
The domain(s) you want to sign with.
After expansion, this can be a list.
-Each element in turn is put into the &%$dkim_domain%& expansion variable
+Each element in turn,
+.new
+lowercased,
+.wen
+is put into the &%$dkim_domain%& expansion variable
while expanding the remaining signing options.
If it is empty after expansion, DKIM signing is not done,
and no error will result even if &%dkim_strict%& is set.
Signers SHOULD use RSA keys of at least 2048 bits.
.endd
-Support for EC keys is being developed under
-&url(https://datatracker.ietf.org/doc/draft-ietf-dcrup-dkim-crypto/).
+.new
+EC keys for DKIM are defined by RFC 8463.
+.wen
They are considerably smaller than RSA keys for equivalent protection.
As they are a recent development, users should consider dual-signing
(by setting a list of selectors, and an expansion for this option)
certtool --load_privkey=dkim_ed25519.private --pubkey_info --outder | tail -c +13 | base64
.endd
-Note that the format
-of Ed25519 keys in DNS has not yet been decided; this release supports
-both of the leading candidates at this time, a future release will
-probably drop support for whichever proposal loses.
+.new
+Exim also supports an alternate format
+of Ed25519 keys in DNS which was a candidate during development
+of the standard, but not adopted.
+A future release will probably drop that support.
+.wen
.option dkim_hash smtp string&!! sha256
Can be set to any one of the supported hash methods, which are:
will be signed, and one signature added for a missing header with the
name will be appended.
-.new
.option dkim_timestamps smtp integer&!! unset
This option controls the inclusion of timestamp information in the signature.
If not set, no such information will be included.
both creation (t=) and expiry (x=) tags will be included.
RFC 6376 lists these tags as RECOMMENDED.
-.wen
.section "Verifying DKIM signatures in incoming mail" "SECDKIMVFY"
.cindex "DKIM" "verification"
-.new
Verification of DKIM signatures in SMTP incoming email is done for all
messages for which an ACL control &%dkim_disable_verify%& has not been set.
.cindex authentication "expansion item"
Performing verification sets up information used by the
&$authresults$& expansion item.
-.wen
-.new The results of that verification are then made available to the
-&%acl_smtp_dkim%& ACL, &new(which can examine and modify them).
+The results of that verification are then made available to the
+&%acl_smtp_dkim%& ACL, which can examine and modify them.
By default, this ACL is called once for each
syntactically(!) correct signature in the incoming message.
A missing ACL definition defaults to accept.
If a cutthrough delivery was in progress for the message, that is
summarily dropped (having wasted the transmission effort).
-To evaluate the &new(verification result) in the ACL
+To evaluate the verification result in the ACL
a large number of expansion variables
containing the signature status and its details are set up during the
runtime of the ACL.
If a domain or identity is listed several times in the (expanded) value of
&%dkim_verify_signers%&, the ACL is only called once for that domain or identity.
+.new
+Note that if the option is set using untrustworthy data
+(such as the From: header)
+care should be taken to force lowercase for domains
+and for the domain part if identities.
+The default setting can be regarded as trustworthy in this respect.
+.wen
+
If multiple signatures match a domain (or identity), the ACL is called once
for each matching signature.
The number of signed body bytes. If zero ("0"), the body is unsigned. If no
limit was set by the signer, "9999999999999" is returned. This makes sure
that this variable always expands to an integer value.
-.new
&*Note:*& The presence of the signature tag specifying a signing body length
is one possible route to spoofing of valid DKIM signatures.
A paranoid implementation might wish to regard signature where this variable
shows less than the "no limit" return as being invalid.
-.wen
.vitem &%$dkim_created%&
UNIX timestamp reflecting the date and time when the signature was created.
.endd
If &$proxy_session$& is set but &$proxy_external_address$& is empty
there was a protocol error.
+The variables &$sender_host_address$& and &$sender_host_port$&
+will have values for the actual client system, not the proxy.
Since the real connections are all coming from the proxy, and the
per host connection tracking is done before Proxy Protocol is
If mua_wrapper is set, the utf8_downconvert control
is initially set to -1.
-.new
The smtp transport has an option &%utf8_downconvert%&.
If set it must expand to one of the three values described above,
and it overrides any previously set value.
-.wen
There is no explicit support for VRFY and EXPN.