-# $Cambridge: exim/src/OS/Makefile-Base,v 1.3 2005/02/17 11:58:25 ph10 Exp $
-
# This file is the basis of the main makefile for Exim and friends. The
# makefile at the top level arranges to build the main makefile by calling
# scripts/Configure-Makefile from within the build directory. This
-# concatentates the configuration settings from Local/Makefile and other,
+# concatenates the configuration settings from Local/Makefile and other,
# optional, Local/* files at the front of this file, to create Makefile in the
# build directory.
+#
+# Copyright (c) The Exim Maintainers 1995 - 2018
SHELL = $(MAKE_SHELL)
SCRIPTS = ../scripts
+O = ../OS
EDITME = ../Local/Makefile
EXIMON_EDITME = ../Local/eximon.conf
LNCC = $(CC)
+# The compile commands can be very long. To make the output look better,
+# they are not normally echoed in full. To get full echoing, the caller
+# must set FULLECHO='' on the command line and call make with -e. We default
+# FULLECHO to '@' to suppress the full echo. Then define an abbreviation.
+
+FULLECHO = @
+FE = $(FULLECHO)
# The default target double-checks the existence of $(EDITME) and then arranges
# to touch it if it exists and any of the optional configuration files, which
# up-to-date. Then the os-specific source files and the C configuration file
# are set up, and finally it goes to the main Exim target.
-all: $(EDITME) checklocalmake Makefile os.h os.c config.h allexim
+all: utils exim
+config: $(EDITME) checklocalmake Makefile os.c config.h version.h version.sh macro.c
checklocalmake:
@if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
# Build (link) the os.h file
-os.h:
+#os.h: $(SCRIPTS)/Configure-os.h \
+# $(O)/os.h-AIX $(O)/os.h-BSDI $(O)/os.h-cygwin \
+# $(O)/os.h-Darwin $(O)/os.h-DGUX $(O)/os.h-DragonFly \
+# $(O)/os.h-FreeBSD $(O)/os.h-GNU $(O)/os.h-GNUkFreeBSD \
+# $(O)/os.h-GNUkNetBSD $(O)/os.h-HI-OSF \
+# $(O)/os.h-HI-UX $(O)/os.h-HP-UX $(O)/os.h-HP-UX-9 \
+# $(O)/os.h-IRIX $(O)/os.h-IRIX6 $(O)/os.h-IRIX632 \
+# $(O)/os.h-IRIX65 $(O)/os.h-Linux $(O)/os.h-mips \
+# $(O)/os.h-NetBSD $(O)/os.h-NetBSD-a.out \
+# $(O)/os.h-OpenBSD $(O)/os.h-OpenUNIX $(O)/os.h-OSF1 \
+# $(O)/os.h-QNX $(O)/os.h-SCO $(O)/os.h-SCO_SV \
+# $(O)/os.h-SunOS4 $(O)/os.h-SunOS5 $(O)/os.h-SunOS5-hal \
+# $(O)/os.h-ULTRIX $(O)/os.h-UNIX_SV \
+# $(O)/os.h-Unixware7 $(O)/os.h-USG
+# $(SHELL) $(SCRIPTS)/Configure-os.h
+
+os.h: $(SCRIPTS)/Configure-os.h \
+ $(O)/os.h-FreeBSD \
+ $(O)/os.h-Linux \
+ $(O)/os.h-OpenBSD \
+ $(O)/os.h-SunOS5
$(SHELL) $(SCRIPTS)/Configure-os.h
# Build the os.c file
-os.c: ../src/os.c
+#os.c: ../src/os.c \
+# $(SCRIPTS)/Configure-os.c \
+# $(O)/os.c-cygwin $(O)/os.c-GNU $(O)/os.c-HI-OSF \
+# $(O)/os.c-IRIX $(O)/os.c-IRIX6 $(O)/os.c-IRIX632 \
+# $(O)/os.c-IRIX65 $(O)/os.c-Linux $(O)/os.c-OSF1
+# $(SHELL) $(SCRIPTS)/Configure-os.c
+
+os.c: ../src/os.c \
+ $(SCRIPTS)/Configure-os.c \
+ $(O)/os.c-Linux
$(SHELL) $(SCRIPTS)/Configure-os.c
# Build the config.h file.
config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
- $(SHELL) $(SCRIPTS)/Configure-config.h
-
+ $(SHELL) $(SCRIPTS)/Configure-config.h "$(MAKE)"
+
+# Build the builtin-macros data struct
+
+MACRO_HSRC = macro_predef.h os.h globals.h config.h \
+ routers/accept.h routers/dnslookup.h routers/ipliteral.h \
+ routers/iplookup.h routers/manualroute.h routers/queryprogram.h \
+ routers/redirect.h
+
+OBJ_MACRO = macro_predef.o \
+ macro-globals.o macro-readconf.o macro-route.o macro-transport.o macro-drtables.o \
+ macro-tls.o \
+ macro-appendfile.o macro-autoreply.o macro-lmtp.o macro-pipe.o macro-queuefile.o \
+ macro-smtp.o macro-accept.o macro-dnslookup.o macro-ipliteral.o macro-iplookup.o \
+ macro-manualroute.o macro-queryprogram.o macro-redirect.o \
+ macro-auth-spa.o macro-cram_md5.o macro-cyrus_sasl.o macro-dovecot.o macro-gsasl_exim.o \
+ macro-heimdal_gssapi.o macro-plaintext.o macro-spa.o macro-authtls.o macro-external.o \
+ macro-dkim.o macro-malware.o macro-signing.o
+
+$(OBJ_MACRO): $(MACRO_HSRC)
+
+macro_predef.o : macro_predef.c
+ @echo "$(CC) -DMACRO_PREDEF macro_predef.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ macro_predef.c
+macro-globals.o : globals.c
+ @echo "$(CC) -DMACRO_PREDEF globals.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ globals.c
+macro-readconf.o : readconf.c
+ @echo "$(CC) -DMACRO_PREDEF readconf.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ readconf.c
+macro-route.o : route.c
+ @echo "$(CC) -DMACRO_PREDEF route.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ route.c
+macro-transport.o: transport.c
+ @echo "$(CC) -DMACRO_PREDEF transport.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transport.c
+macro-drtables.o : drtables.c
+ @echo "$(CC) -DMACRO_PREDEF drtables.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ drtables.c
+macro-tls.o: tls.c
+ @echo "$(CC) -DMACRO_PREDEF tls.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ tls.c
+macro-appendfile.o : transports/appendfile.c
+ @echo "$(CC) -DMACRO_PREDEF transports/appendfile.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/appendfile.c
+macro-autoreply.o : transports/autoreply.c
+ @echo "$(CC) -DMACRO_PREDEF transports/autoreply.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/autoreply.c
+macro-lmtp.o: transports/lmtp.c
+ @echo "$(CC) -DMACRO_PREDEF transports/lmtp.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/lmtp.c
+macro-pipe.o : transports/pipe.c
+ @echo "$(CC) -DMACRO_PREDEF transports/pipe.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/pipe.c
+macro-queuefile.o : transports/queuefile.c
+ @echo "$(CC) -DMACRO_PREDEF transports/queuefile.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/queuefile.c
+macro-smtp.o : transports/smtp.c
+ @echo "$(CC) -DMACRO_PREDEF transports/smtp.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ transports/smtp.c
+macro-accept.o : routers/accept.c
+ @echo "$(CC) -DMACRO_PREDEF routers/accept.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/accept.c
+macro-dnslookup.o : routers/dnslookup.c
+ @echo "$(CC) -DMACRO_PREDEF routers/dnslookup.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/dnslookup.c
+macro-ipliteral.o : routers/ipliteral.c
+ @echo "$(CC) -DMACRO_PREDEF routers/ipliteral.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/ipliteral.c
+macro-iplookup.o : routers/iplookup.c
+ @echo "$(CC) -DMACRO_PREDEF routers/iplookup.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/iplookup.c
+macro-manualroute.o : routers/manualroute.c
+ @echo "$(CC) -DMACRO_PREDEF routers/manualroute.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/manualroute.c
+macro-queryprogram.o : routers/queryprogram.c
+ @echo "$(CC) -DMACRO_PREDEF routers/queryprogram.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/queryprogram.c
+macro-redirect.o : routers/redirect.c
+ @echo "$(CC) -DMACRO_PREDEF routers/redirect.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ routers/redirect.c
+macro-auth-spa.o : auths/auth-spa.c
+ @echo "$(CC) -DMACRO_PREDEF auths/auth-spa.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/auth-spa.c
+macro-cram_md5.o : auths/cram_md5.c
+ @echo "$(CC) -DMACRO_PREDEF auths/cram_md5.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cram_md5.c
+macro-cyrus_sasl.o : auths/cyrus_sasl.c
+ @echo "$(CC) -DMACRO_PREDEF auths/cyrus_sasl.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/cyrus_sasl.c
+macro-dovecot.o: auths/dovecot.c
+ @echo "$(CC) -DMACRO_PREDEF auths/dovecot.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/dovecot.c
+macro-external.o: auths/external.c
+ @echo "$(CC) -DMACRO_PREDEF auths/external.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/external.c
+macro-gsasl_exim.o : auths/gsasl_exim.c
+ @echo "$(CC) -DMACRO_PREDEF auths/gsasl_exim.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/gsasl_exim.c
+macro-heimdal_gssapi.o: auths/heimdal_gssapi.c
+ @echo "$(CC) -DMACRO_PREDEF auths/heimdal_gssapi.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/heimdal_gssapi.c
+macro-plaintext.o : auths/plaintext.c
+ @echo "$(CC) -DMACRO_PREDEF auths/plaintext.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/plaintext.c
+macro-spa.o : auths/spa.c
+ @echo "$(CC) -DMACRO_PREDEF auths/spa.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/spa.c
+macro-authtls.o: auths/tls.c
+ @echo "$(CC) -DMACRO_PREDEF auths/tls.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ auths/tls.c
+macro-dkim.o: dkim.c
+ @echo "$(CC) -DMACRO_PREDEF dkim.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ dkim.c
+macro-malware.o: malware.c
+ @echo "$(CC) -DMACRO_PREDEF malware.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ malware.c
+macro-signing.o: pdkim/signing.c
+ @echo "$(CC) -DMACRO_PREDEF pdkim/signing.c"
+ $(FE)$(CC) -c $(CFLAGS) -DMACRO_PREDEF $(INCLUDE) -o $@ pdkim/signing.c
+
+macro_predef: $(OBJ_MACRO)
+ @echo "$(LNCC) -o $@"
+ $(FE)$(LNCC) -o $@ $(LFLAGS) $(OBJ_MACRO)
+
+macro.c: macro_predef
+ ./macro_predef > macro.c
# This target is recognized specially by GNU make. It records those targets
# that do not correspond to files that are being built and which should
# therefore always be run, even if the files exist. This shouldn't in fact be a
# problem, but it does no harm. Other make programs will just ignore this.
-.PHONY: all allexim buildauths buildlookups buildpcre buildrouters \
+.PHONY: all config utils \
+ buildauths buildlookups buildpdkim buildrouters \
buildtransports checklocalmake clean
-# This is the real default target for all the various exim binaries and
-# scripts, once the configuring stuff is done.
-
-allexim: config.h buildpcre $(EXIM_MONITOR) exicyclog exinext exiwhat \
+utils: $(EXIM_MONITOR) exicyclog exinext exiwhat \
exigrep eximstats exipick exiqgrep exiqsumm \
transport-filter.pl convert4r3 convert4r4 \
exim_checkaccess \
- exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock \
- buildlookups buildrouters buildtransports \
- buildauths exim
+ exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock
# Targets for special-purpose configuration header builders
buildconfig: buildconfig.c
- $(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
+ @echo "$(CC) buildconfig.c"
+ $(FE)$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
# Target for the exicyclog utility script
-exicyclog: Makefile config.h ../src/exicyclog.src
+exicyclog: config ../src/exicyclog.src
@rm -f exicyclog
- sed \
+ @. ./version.sh && sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
-e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
-e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
-e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
- -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
-e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
+ -e "s?CHMOD_COMMAND?$(CHMOD_COMMAND)?" \
+ -e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
-e "s?MV_COMMAND?$(MV_COMMAND)?" \
-e "s?RM_COMMAND?$(RM_COMMAND)?" \
+ -e "s?TOUCH_COMMAND?$(TOUCH_COMMAND)?" \
+ -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
+ -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
../src/exicyclog.src > exicyclog-t
@mv exicyclog-t exicyclog
@chmod a+x exicyclog
- @echo ">>> exicyclog script built"; echo ""
+ @echo ">>> exicyclog script built"
# Target for the exinext utility script
-exinext: Makefile config.h ../src/exinext.src
+exinext: config ../src/exinext.src
@rm -f exinext
- sed \
+ @. ./version.sh && sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
-e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
-e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
-e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
+ -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
+ -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
../src/exinext.src > exinext-t
@mv exinext-t exinext
@chmod a+x exinext
- @echo ">>> exinext script built"; echo ""
+ @echo ">>> exinext script built"
# Target for the exiwhat utility script
-exiwhat: Makefile config.h ../src/exiwhat.src
+exiwhat: config ../src/exiwhat.src
@rm -f exiwhat
- sed \
+ @. ./version.sh && sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
-e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \
-e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \
-e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \
+ -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
+ -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
+ -e "s?RM_COMMAND?$(RM_COMMAND)?" \
../src/exiwhat.src > exiwhat-t
@mv exiwhat-t exiwhat
@chmod a+x exiwhat
- @echo ">>> exiwhat script built"; echo ""
+ @echo ">>> exiwhat script built"
# Target for the exim_checkaccess utility script
-exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src
+exim_checkaccess: config ../src/exim_checkaccess.src
@rm -f exim_checkaccess
- sed \
+ @. ./version.sh && sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
-e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
-e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
-e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
+ -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
../src/exim_checkaccess.src > exim_checkaccess-t
@mv exim_checkaccess-t exim_checkaccess
@chmod a+x exim_checkaccess
@echo ">>> exim_checkaccess script built"; echo ""
# Target for the Exim monitor start-up script
-eximon: Makefile config.h ../src/eximon.src ../OS/eximon.conf-Default \
+eximon: config ../src/eximon.src ../OS/eximon.conf-Default \
../Local/eximon.conf
@rm -f eximon
$(SHELL) $(SCRIPTS)/Configure-eximon
- sed \
+ @. ./version.sh && sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
-e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \
-e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \
-e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \
+ -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
+ -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
../src/eximon.src >> eximon
@echo ">>> eximon script built"; echo ""
# Targets for utilities; these are all Perl scripts that have to get the
# location of Perl put in them. A few need other things as well.
-exigrep: Makefile ../src/exigrep.src
+exigrep: config ../src/exigrep.src
@rm -f exigrep
- sed \
+ @. ./version.sh && sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
-e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
-e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \
-e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
+ -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
+ -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
../src/exigrep.src > exigrep-t
@mv exigrep-t exigrep
@chmod a+x exigrep
- @echo ">>> exigrep script built"; echo ""
+ @echo ">>> exigrep script built"
-eximstats: Makefile ../src/eximstats.src
+eximstats: config ../src/eximstats.src
@rm -f eximstats
- sed \
+ @. ./version.sh && sed \
-e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
+ -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
../src/eximstats.src > eximstats-t
@mv eximstats-t eximstats
@chmod a+x eximstats
- @echo ">>> eximstats script built"; echo ""
+ @echo ">>> eximstats script built"
-exiqgrep: Makefile ../src/exiqgrep.src
+exiqgrep: config ../src/exiqgrep.src
@rm -f exiqgrep
- sed \
+ @. ./version.sh && sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
-e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
-e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
+ -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
../src/exiqgrep.src > exiqgrep-t
@mv exiqgrep-t exiqgrep
@chmod a+x exiqgrep
- @echo ">>> exiqgrep script built"; echo ""
+ @echo ">>> exiqgrep script built"
-exiqsumm: Makefile ../src/exiqsumm.src
+exiqsumm: config ../src/exiqsumm.src
@rm -f exiqsumm
- sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ @. ./version.sh && sed \
+ -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
+ -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
../src/exiqsumm.src > exiqsumm-t
@mv exiqsumm-t exiqsumm
@chmod a+x exiqsumm
- @echo ">>> exiqsumm script built"; echo ""
+ @echo ">>> exiqsumm script built"
-exipick: Makefile ../src/exipick.src
+exipick: config ../src/exipick.src
@rm -f exipick
- sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ @. ./version.sh && sed \
+ -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
-e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
+ -e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
+ -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
+ -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
../src/exipick.src > exipick-t
@mv exipick-t exipick
@chmod a+x exipick
- @echo ">>> exipick script built"; echo ""
+ @echo ">>> exipick script built"
-transport-filter.pl: Makefile ../src/transport-filter.src
+transport-filter.pl: config ../src/transport-filter.src
@rm -f transport-filter.pl
- sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ @. ./version.sh && sed \
+ -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
+ -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
../src/transport-filter.src > transport-filter.pl-t
@mv transport-filter.pl-t transport-filter.pl
@chmod a+x transport-filter.pl
- @echo ">>> transport-filter.pl script built"; echo ""
+ @echo ">>> transport-filter.pl script built"
-convert4r3: Makefile ../src/convert4r3.src
+convert4r3: config ../src/convert4r3.src
@rm -f convert4r3
- sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ @. ./version.sh && sed \
+ -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
+ -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
../src/convert4r3.src > convert4r3-t
@mv convert4r3-t convert4r3
@chmod a+x convert4r3
- @echo ">>> convert4r3 script built"; echo ""
+ @echo ">>> convert4r3 script built"
-convert4r4: Makefile ../src/convert4r4.src
+convert4r4: config ../src/convert4r4.src
@rm -f convert4r4
- sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ @. ./version.sh && sed \
+ -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
+ -e "s?EXIM_RELEASE_VERSION?$${EXIM_RELEASE_VERSION}?" \
+ -e "s?EXIM_VARIANT_VERSION?$${EXIM_VARIANT_VERSION}?" \
../src/convert4r4.src > convert4r4-t
@mv convert4r4-t convert4r4
@chmod a+x convert4r4
- @echo ">>> convert4r4 script built"; echo ""
+ @echo ">>> convert4r4 script built"
# These are objects of optional features. They are always compiled, but
# are thrown away by the linker.
OBJ_WITH_CONTENT_SCAN = malware.o mime.o regex.o spam.o spool_mbox.o
-OBJ_WITH_OLD_DEMIME = demime.o
-OBJ_EXPERIMENTAL = bmi_spam.o spf.o srs.o
+OBJ_EXPERIMENTAL = arc.o \
+ bmi_spam.o \
+ dane.o \
+ dcc.o \
+ dmarc.o \
+ imap_utf7.o \
+ spf.o \
+ srs.o \
+ utf8.o
# Targets for final binaries; the main one has a build number which is
# updated each time. We don't bother with that for the auxiliaries.
-OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
+OBJ_LOOKUPS = lookups/lf_quote.o lookups/lf_check_file.o lookups/lf_sqlperform.o
+
+OBJ_EXIM = acl.o base64.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
- filtertest.o globals.o \
+ filtertest.o globals.o dkim.o dkim_transport.o hash.o \
header.o host.o ip.o log.o lss.o match.o moan.o \
os.o parse.o queue.o \
rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
- store.o string.o tls.o tod.o transport.o tree.o verify.o \
+ std-crypto.o store.o string.o tls.o tod.o transport.o tree.o verify.o \
+ environment.o macro.o \
+ $(OBJ_LOOKUPS) \
local_scan.o $(EXIM_PERL) $(OBJ_WITH_CONTENT_SCAN) \
- $(OBJ_WITH_OLD_DEMIME) $(OBJ_EXPERIMENTAL)
+ $(OBJ_EXPERIMENTAL)
-exim: pcre/libpcre.a lookups/lookups.a auths/auths.a \
- routers/routers.a transports/transports.a \
- $(OBJ_EXIM) version.c
- @echo " "
- awk '{ print ($$1+1) }' cnumber.h > cnumber.temp
- rm -f cnumber.h; mv cnumber.temp cnumber.h
- $(CC) -c $(CFLAGS) $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) version.c
- rm -f exim
- $(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
- pcre/libpcre.a \
+exim: buildlookups buildauths pdkim/pdkim.a \
+ buildrouters buildtransports \
+ $(OBJ_EXIM) version.o
+ @echo "$(LNCC) -o exim"
+ $(FE)$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
routers/routers.a transports/transports.a lookups/lookups.a \
- auths/auths.a \
+ auths/auths.a pdkim/pdkim.a \
$(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
$(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
- $(PERL_LIBS) $(TLS_LIBS) $(LDFLAGS)
+ $(PERL_LIBS) $(TLS_LIBS) $(PCRE_LIBS) $(LDFLAGS)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim; \
$(STRIP_COMMAND) exim; \
OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o
exim_dumpdb: $(OBJ_DUMPDB)
- $(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
+ @echo "$(LNCC) -o exim_dumpdb"
+ $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
$(LIBS) $(EXTRALIBS) $(DBMLIB)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_dumpdb; \
$(STRIP_COMMAND) exim_dumpdb; \
fi
- @echo " "
@echo ">>> exim_dumpdb utility built"
@echo " "
OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
-exim_fixdb: $(OBJ_FIXDB)
- $(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
- $(LIBS) $(EXTRALIBS) $(DBMLIB)
+exim_fixdb: $(OBJ_FIXDB) buildauths
+ @echo "$(LNCC) -o exim_fixdb"
+ $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
+ auths/auths.a $(LIBS) $(EXTRALIBS) $(DBMLIB)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_fixdb; \
$(STRIP_COMMAND) exim_fixdb; \
fi
- @echo " "
@echo ">>> exim_fixdb utility built"
@echo " "
OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o
exim_tidydb: $(OBJ_TIDYDB)
- $(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
+ @echo "$(LNCC) -o exim_tidydb"
+ $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
$(LIBS) $(EXTRALIBS) $(DBMLIB)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_tidydb; \
$(STRIP_COMMAND) exim_tidydb; \
fi
- @echo " "
@echo ">>> exim_tidydb utility built"
@echo " "
# The utility for building dbm files
exim_dbmbuild: exim_dbmbuild.o
- $(LNCC) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
+ @echo "$(LNCC) -o exim_dbmbuild"
+ $(FE)$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
$(LIBS) $(EXTRALIBS) $(DBMLIB)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_dbmbuild; \
$(STRIP_COMMAND) exim_dbmbuild; \
fi
- @echo " "
@echo ">>> exim_dbmbuild utility built"
@echo " "
# The utility for locking a mailbox while messing around with it
-exim_lock: exim_lock.c
- $(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
- $(LNCC) -o exim_lock $(LFLAGS) exim_lock.o \
+exim_lock: exim_lock.c os.h
+ @echo "$(CC) exim_lock.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
+ @echo "$(LNCC) -o exim_lock"
+ $(FE)$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o \
$(LIBS) $(EXTRALIBS)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_lock; \
$(STRIP_COMMAND) exim_lock; \
fi
- @echo " "
@echo ">>> exim_lock utility built"
@echo " "
# The complete modules list also includes some specially compiled versions of
# code from the main Exim source tree.
-OBJ_MONBIN = util-spool_in.o util-store.o util-string.o tod.o tree.o $(MONBIN)
+OBJ_MONBIN = util-spool_in.o \
+ util-store.o \
+ util-string.o \
+ util-queue.o \
+ util-tod.o \
+ tree.o \
+ $(MONBIN)
-eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) pcre/libpcre.a \
+eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) \
../exim_monitor/em_version.c
- $(CC) -o em_version.o -c \
+ @echo "$(CC) exim_monitor/em_version.c"
+ $(FE)$(CC) -o em_version.o -c \
$(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
- $(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
- $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 pcre/libpcre.a \
+ @echo "$(LNCC) -o eximon.bin"
+ $(FE)$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
+ $(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 $(PCRE_LIBS) \
$(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) eximon.bin; \
$(STRIP_COMMAND) eximon.bin; \
fi
- @echo " "
@echo ">>> exim monitor binary built"
@echo " "
# Compile step for most of the exim modules. HDRS is a list of headers
-# which cause everthing to be rebuilt. PHDRS is the same, for the use
+# which cause everything to be rebuilt. PHDRS is the same, for the use
# of routers, transports, and authenticators. I can't find a way of doing this
# in one. This list is overkill, but it doesn't really take much time to
# rebuild Exim on a modern computer.
-HDRS = config.h dbfunctions.h dbstuff.h exim.h functions.h globals.h local_scan.h macros.h mytypes.h structs.h
-PHDRS = ../config.h ../dbfunctions.h ../dbstuff.h ../exim.h ../functions.h ../globals.h ../local_scan.h ../macros.h ../mytypes.h ../structs.h
+HDRS = blob.h \
+ config.h \
+ dbfunctions.h \
+ dbstuff.h \
+ exim.h \
+ functions.h \
+ globals.h \
+ hash.h \
+ local_scan.h \
+ macros.h \
+ mytypes.h \
+ sha_ver.h \
+ structs.h \
+ os.h
+PHDRS = ../config.h \
+ ../dbfunctions.h \
+ ../dbstuff.h \
+ ../exim.h \
+ ../functions.h \
+ ../globals.h \
+ ../local_scan.h \
+ ../macros.h \
+ ../mytypes.h \
+ ../structs.h \
+ ../os.h
.SUFFIXES: .o .c
-.c.o:; $(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
+.c.o:; @echo "$(CC) $*.c"
+ $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
+
+# Update Exim's version information and build the version object.
+
+version.h version.sh::
+ @../scripts/reversion
+
+cnumber.h: version.h
+
+version.o: $(HDRS) cnumber.h version.h version.c
# This is the dummy module for use by test compiles of individual modules. It
# contains functions such as log_write() that may be called from bits of Exim
# Compile instructions for perl.o for when EXIM_PERL is set
perl.o: $(HDRS) perl.c
- $(PERL_CC) $(PERL_CCOPTS) $(INCLUDE) -c perl.c
+ @echo "$(PERL_CC) perl.c"
+ $(FE)$(PERL_CC) $(PERL_CCOPTS) $(CFLAGS) $(INCLUDE) -c perl.c
# Compile instructions for the database utility modules
exim_dumpdb.o: $(HDRS) exim_dbutil.c
- $(CC) -c $(CFLAGS) $(INCLUDE) \
+ @echo "$(CC) -DEXIM_DUMPDB exim_dbutil.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
-DCOMPILE_UTILITY \
-DEXIM_DUMPDB \
-o exim_dumpdb.o exim_dbutil.c
exim_fixdb.o: $(HDRS) exim_dbutil.c
- $(CC) -c $(CFLAGS) $(INCLUDE) \
+ @echo "$(CC) -DEXIM_FIXDB exim_dbutil.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
-DCOMPILE_UTILITY \
-DEXIM_FIXDB \
-o exim_fixdb.o exim_dbutil.c
exim_tidydb.o: $(HDRS) exim_dbutil.c
- $(CC) -c $(CFLAGS) $(INCLUDE) \
+ @echo "$(CC) -DEXIM_TIDYDB exim_dbutil.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
-DCOMPILE_UTILITY \
-DEXIM_TIDYDB \
-o exim_tidydb.o exim_dbutil.c
# Compile instructions for exim_dbmbuild
exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
- $(CC) -c $(CFLAGS) $(INCLUDE) -o exim_dbmbuild.o exim_dbmbuild.c
+ @echo "$(CC) exim_dbmbuild.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY \
+ -o exim_dbmbuild.o exim_dbmbuild.c
# Utilities use special versions of some modules - typically with debugging
# calls cut out.
util-spool_in.o: $(HDRS) spool_in.c
- $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
+ @echo "$(CC) -DCOMPILE_UTILITY spool_in.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
util-store.o: $(HDRS) store.c
- $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
+ @echo "$(CC) -DCOMPILE_UTILITY store.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
util-string.o: $(HDRS) string.c
- $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
+ @echo "$(CC) -DCOMPILE_UTILITY string.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
+
+util-queue.o: $(HDRS) queue.c
+ @echo "$(CC) -DCOMPILE_UTILITY queue.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-queue.o queue.c
+
+util-tod.o: $(HDRS) tod.c
+ @echo "$(CC) -DCOMPILE_UTILITY tod.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-tod.o tod.c
util-os.o: $(HDRS) os.c
- $(CC) -c $(CFLAGS) $(INCLUDE) \
+ @echo "$(CC) -DCOMPILE_UTILITY os.c"
+ $(FE)$(CC) -c $(CFLAGS) $(INCLUDE) \
-DCOMPILE_UTILITY \
-DOS_LOAD_AVERAGE \
-DFIND_RUNNING_INTERFACES \
# The local scan module depends only on its own special header, and is compiled
# from a source whose location is set by configuration.
-local_scan.o: Makefile local_scan.h ../$(LOCAL_SCAN_SOURCE)
- $(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
+local_scan.o: config local_scan.h ../$(LOCAL_SCAN_SOURCE)
+ @echo "$(CC) local_scan.c"
+ $(FE)$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
# Dependencies for the "ordinary" exim modules
acl.o: $(HDRS) acl.c
+base64.o: $(HDRS) mime.h base64.c
child.o: $(HDRS) child.c
crypt16.o: $(HDRS) crypt16.c
daemon.o: $(HDRS) daemon.c
dbfn.o: $(HDRS) dbfn.c
debug.o: $(HDRS) debug.c
-deliver.o: $(HDRS) deliver.c
+deliver.o: $(HDRS) transports/smtp.h deliver.c
directory.o: $(HDRS) directory.c
dns.o: $(HDRS) dns.c
enq.o: $(HDRS) enq.c
exim.o: $(HDRS) exim.c
expand.o: $(HDRS) expand.c
+environment.o: $(HDRS) environment.c
filter.o: $(HDRS) filter.c
filtertest.o: $(HDRS) filtertest.c
globals.o: $(HDRS) globals.c
+hash.o: $(HDRS) hash.c
header.o: $(HDRS) header.c
host.o: $(HDRS) host.c
ip.o: $(HDRS) ip.c
lss.o: $(HDRS) lss.c
match.o: $(HDRS) match.c
moan.o: $(HDRS) moan.c
-os.o: $(HDRS) os.c
+os.o: $(HDRS) $(OS_C_INCLUDES) os.c
parse.o: $(HDRS) parse.c
queue.o: $(HDRS) queue.c
rda.o: $(HDRS) rda.c
smtp_out.o: $(HDRS) smtp_out.c
spool_in.o: $(HDRS) spool_in.c
spool_out.o: $(HDRS) spool_out.c
+std-crypto.o: $(HDRS) std-crypto.c
store.o: $(HDRS) store.c
string.o: $(HDRS) string.c
-tls.o: $(HDRS) tls.c tls-gnu.c tls-openssl.c
+tls.o: $(HDRS) tls.c \
+ tls-gnu.c tlscert-gnu.c \
+ tls-openssl.c tlscert-openssl.c \
+ tls-cipher-stdname.c
tod.o: $(HDRS) tod.c
transport.o: $(HDRS) transport.c
tree.o: $(HDRS) tree.c
-verify.o: $(HDRS) verify.c
-
+verify.o: $(HDRS) transports/smtp.h verify.c
+dkim.o: $(HDRS) pdkim/pdkim.h dkim.c
+dkim_transport.o: $(HDRS) dkim_transport.c
# Dependencies for WITH_CONTENT_SCAN modules
malware.o: $(HDRS) malware.c
-mime.o: $(HDRS) mime.c
+mime.o: $(HDRS) mime.h mime.c
regex.o: $(HDRS) regex.c
spam.o: $(HDRS) spam.c
spool_mbox.o: $(HDRS) spool_mbox.c
-# Dependencies for WITH_OLD_DEMIME modules
-
-demime.o: $(HDRS) demime.c
-
-
# Dependencies for EXPERIMENTAL_* modules
-bmi_spam.o: $(HDRS) bmi_spam.c
-spf.o: $(HDRS) spf.c
-srs.o: $(HDRS) srs.c
-
+arc.o: $(HDRS) pdkim/pdkim.h arc.c
+bmi_spam.o: $(HDRS) bmi_spam.c
+dane.o: $(HDRS) dane.c dane-openssl.c
+dcc.o: $(HDRS) dcc.h dcc.c
+dmarc.o: $(HDRS) pdkim/pdkim.h dmarc.h dmarc.c
+imap_utf7.o: $(HDRS) imap_utf7.c
+spf.o: $(HDRS) spf.h spf.c
+srs.o: $(HDRS) srs.h srs.c
+utf8.o: $(HDRS) utf8.c
# The module containing tables of available lookups, routers, auths, and
# transports must be rebuilt if any of them are. However, because the makefiles
drtables.o: $(HDRS) drtables.c
+# We depend upon object files built as part of building the lookups library
+# When using parallel make, we don't have the dependency to force building
+# in the sub-directory unless we force that dependency:
+
+$(OBJ_LOOKUPS): buildlookups
# The exim monitor's private modules - the sources live in a private
# subdirectory. The final binary combines the private modules with some
em_xs.o: ../exim_monitor/em_xs.c ../exim_monitor/em_hdr.h
em_version.o: ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
$(MONBIN): $(HDRS)
- $(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
+ @echo "$(CC) exim_monitor/`echo $@ | sed 's/o$$/c/'`"
+ $(FE)$(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
../exim_monitor/`echo $@ | sed 's/o$$/c/'`
-# Targets for the various libraries that Exim uses. This coding is tedious,
-# because different versions of "make" behave in different ways with regard
-# to rebuilding. If these target names are of the form pcre/libpcre.a, for
-# example, then a forcing mechanism is required to get them obeyed each time.
-# That's fine on Solaris and other systems; the rebuilding of the exim target
-# happens only if the libraries are actually rebuilt. However, on IRIX, if
-# the target is forced, the exim target gets unnecessarily rebuilt even if
-# the .a file is not. Contrariwise, if we use dummy names, they don't interact
-# with the building of exim (and eximon.bin), but for libpcre Exim doesn't get
-# rebuilt when it should. (For the others it does, because they remove
-# drtables.o when they rebuild.) To get round this, we forcibly remove the
-# binary when it needs to be rebuilt.
-
-# The PCRE regex library. Move the pcretest program to the util directory. Some
-# "clever" versions of make notice that there are two successive shell
-# commands, and they run them in the same shell. This means that we have to
-# take care to encapsulate change of directory in parentheses, so that it
-# reverts when it should.
-
-buildpcre:
- @(cd pcre; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" \
- CFLAGS="$(CFLAGS) $(PCRE_CFLAGS)" \
- RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
- INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)")
- @if $(SHELL) $(SCRIPTS)/newer pcre/libpcre.a exim; then \
- rm -f exim eximon.bin; fi
+# Targets for the various libraries that Exim uses.
# The lookups library.
-buildlookups:
- @cd lookups; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
- RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
- INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"; \
- echo " "
+buildlookups: config
+ @cd lookups && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+ CFLAGS_DYNAMIC="$(CFLAGS_DYNAMIC)" HDRS="../version.h $(PHDRS)" \
+ FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" \
+ INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"
+ @echo " "
# The routers library.
-buildrouters:
- @cd routers; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
- RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
- INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
- echo " "
+buildrouters: config
+ @cd routers && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+ FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
+ INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
+ @echo " "
# The transports library.
-buildtransports:
- @cd transports; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
- RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
- INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
- echo " "
+buildtransports: config
+ @cd transports && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+ FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
+ INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
+ @echo " "
# The library of authorization modules
-buildauths:
- @cd auths; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
- RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
- INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
- echo " "
+buildauths: config
+ @cd auths && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+ FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
+ INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
+ @echo " "
+
+# The PDKIM library
+
+buildpdkim: pdkim/pdkim.a
+pdkim/pdkim.a: config
+ @cd pdkim && $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
+ FE="$(FE)" RANLIB="$(RANLIB)" RM_COMMAND="$(RM_COMMAND)" HDRS="$(PHDRS)" \
+ INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"
+ @echo " "
# The "clean", "install", and "makefile" targets just pass themselves back to
# the main Exim makefile. These targets will be obeyed only if "make" is obeyed
# These are the test targets themselves
test_dbfn: config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
- string.o tod.o version.o
+ string.o tod.o version.o utf8.o
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
+ $(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY store.c
$(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
dummies.o sa-globals.o sa-os.o store.o string.o \
- tod.o version.o $(LIBS) $(DBMLIB)
- rm -f dbfn.o
+ tod.o version.o utf8.o $(LIBS) $(DBMLIB) $(LDFLAGS)
+ rm -f dbfn.o store.o
-test_host: config.h host.c dns.c dummies.o sa-globals.o sa-os.o store.o \
- string.o tod.o tree.o
+test_host: config.h child.c host.c dns.c dummies.c sa-globals.o os.o \
+ store.o string.o tod.o tree.o
+ $(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST child.c
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
$(LNCC) -o test_host $(LFLAGS) \
- host.o dns.o dummies.o sa-globals.o os.o store.o string.o tod.o tree.o \
- $(LIBS) $(LIBRESOLV)
- rm -f dummies.o host.o dns.o
+ host.o child.o dns.o dummies.o sa-globals.o os.o store.o string.o \
+ tod.o tree.o $(LIBS) $(LIBRESOLV)
+ rm -f child.o dummies.o host.o dns.o
-test_os: os.h os.c dummies.o sa-globals.o store.o string.o tod.o
+test_os: os.h os.c dummies.o sa-globals.o store.o string.o tod.o utf8.o
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
$(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
- sa-globals.o store.o string.o tod.o $(LIBS)
+ sa-globals.o store.o string.o tod.o utf8.o $(LIBS) $(LDFLAGS)
rm -f os.o
test_parse: config.h parse.c dummies.o sa-globals.o \
- store.o string.o tod.o version.o
+ store.o string.o tod.o version.o utf8.o
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
$(LNCC) -o test_parse $(LFLAGS) parse.o \
- dummies.o sa-globals.o store.o string.o tod.o version.o
+ dummies.o sa-globals.o store.o string.o tod.o version.o \
+ utf8.o $(LDFLAGS)
rm -f parse.o
-test_string: config.h string.c dummies.o sa-globals.o store.o tod.o
+test_string: config.h string.c dummies.o sa-globals.o store.o tod.o utf8.o
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
$(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
- dummies.o sa-globals.o store.o tod.o $(LIBS)
+ dummies.o sa-globals.o store.o tod.o utf8.o $(LIBS) $(LDFLAGS)
rm -f string.o
# End
git://git.exim.org / exim.git / blobdiff