pl, smtp_command, s);
return FALSE;
+ case ERRNO_TLSFAILURE: /* Handle bad first read; can happen with
+ GnuTLS and TLS1.3 */
+ *message = US"bad first read from TLS conn";
+ return TRUE;
+
case ERRNO_FILTER_FAIL: /* Handle a failed filter process error;
can't send QUIT as we mustn't end the DATA. */
*message = string_sprintf("transport filter process failed (%d)%s",
Return:
OK all well
+ DEFER error on first read of TLS'd conn
FAIL SMTP error in response
*/
int
{
BOOL pending_BANNER = sx->pending_BANNER;
BOOL pending_EHLO = sx->pending_EHLO;
+int rc = FAIL;
sx->pending_BANNER = FALSE; /* clear early to avoid recursion */
sx->pending_EHLO = FALSE;
if (!smtp_reap_banner(sx))
{
DEBUG(D_transport) debug_printf("bad banner\n");
+ if (tls_out.active.sock >= 0) rc = DEFER;
goto fail;
}
}
if (!smtp_reap_ehlo(sx))
{
DEBUG(D_transport) debug_printf("bad response for EHLO\n");
+ if (tls_out.active.sock >= 0) rc = DEFER;
goto fail;
}
fail:
invalidate_ehlo_cache_entry(sx);
(void) smtp_discard_responses(sx, sx->conn_args.ob, *countp);
- return FAIL;
+ return rc;
}
#endif
-2 I/O or other non-response error for RCPT
-3 DATA or MAIL failed - errno and buffer set
-4 banner or EHLO failed (early-pipelining)
+ -5 banner or EHLO failed (early-pipelining, TLS)
*/
static int
address_item * addr = sx->sync_addr;
smtp_transport_options_block * ob = sx->conn_args.ob;
int yield = 0;
+int rc;
#ifdef EXPERIMENTAL_PIPE_CONNECT
-if (smtp_reap_early_pipe(sx, &count) != OK)
- return -4;
+if ((rc = smtp_reap_early_pipe(sx, &count)) != OK)
+ return rc == FAIL ? -4 : -5;
#endif
/* Handle the response for a MAIL command. On error, reinstate the original
{
DEBUG(D_transport) debug_printf("bad response for MAIL\n");
Ustrcpy(big_buffer, mail_command); /* Fits, because it came from there! */
+ if (errno == ERRNO_TLSFAILURE)
+ return -5;
if (errno == 0 && sx->buffer[0] != 0)
{
int save_errno = 0;
}
}
+ /* Error on first TLS read */
+
+ else if (errno == ERRNO_TLSFAILURE)
+ return -5;
+
/* Timeout while reading the response */
else if (errno == ETIMEDOUT)
int code;
uschar *msg;
BOOL pass_message;
+
+ if (errno == ERRNO_TLSFAILURE) /* Error on first TLS read */
+ return -5;
+
if (pending_DATA > 0 || (yield & 1) != 0)
{
if (errno == 0 && sx->buffer[0] == '4')
tc_chunk_last add LAST option to SMTP BDAT command
tc_reap_prev reap response to previous SMTP commands
-Returns: OK or ERROR
+Returns:
+ OK or ERROR
+ DEFER TLS error on first read (EHLO-resp); errno set
*/
static int
case 2: sx->completed_addr = TRUE; /* 5xx (only) => progress made */
case 0: break; /* No 2xx or 5xx, but no probs */
- case -1: /* Timeout on RCPT */
+ case -5: errno = ERRNO_TLSFAILURE;
+ return DEFER;
#ifdef EXPERIMENTAL_PIPE_CONNECT
case -4: /* non-2xx for pipelined banner or EHLO */
#endif
+ case -1: /* Timeout on RCPT */
default: return ERROR; /* I/O error, or any MAIL/DATA error */
}
cmd_count = 1;
uschar * message = NULL;
int yield = OK;
int rc;
+#ifdef SUPPORT_TLS
+uschar * tls_errstr;
+#endif
sx->conn_args.ob = ob;
else
TLS_NEGOTIATE:
{
- uschar * errstr;
sx->cctx.tls_ctx = tls_client_start(sx->cctx.sock, sx->conn_args.host,
sx->addrlist, sx->conn_args.tblock,
# ifdef SUPPORT_DANE
sx->dane ? &tlsa_dnsa : NULL,
# endif
- &tls_out, &errstr);
+ &tls_out, &tls_errstr);
if (!sx->cctx.tls_ctx)
{
/* TLS negotiation failed; give an error. From outside, this function may
be called again to try in clear on a new connection, if the options permit
it for this host. */
- DEBUG(D_tls) debug_printf("TLS session fail: %s\n", errstr);
+GNUTLS_CONN_FAILED:
+ DEBUG(D_tls) debug_printf("TLS session fail: %s\n", tls_errstr);
# ifdef SUPPORT_DANE
if (sx->dane)
{
log_write(0, LOG_MAIN,
"DANE attempt failed; TLS connection to %s [%s]: %s",
- sx->conn_args.host->name, sx->conn_args.host->address, errstr);
+ sx->conn_args.host->name, sx->conn_args.host->address, tls_errstr);
# ifndef DISABLE_EVENT
(void) event_raise(sx->conn_args.tblock->event_action,
US"dane:fail", US"validation-failure"); /* could do with better detail */
# endif
errno = ERRNO_TLSFAILURE;
- message = string_sprintf("TLS session: %s", errstr);
+ message = string_sprintf("TLS session: %s", tls_errstr);
sx->send_quit = FALSE;
goto TLS_FAILED;
}
#endif
{
if (!smtp_reap_ehlo(sx))
+#ifdef USE_GNUTLS
+ {
+ /* The GnuTLS layer in Exim only spots a server-rejection of a client
+ cert late, under TLS1.3 - which means here; the first time we try to
+ receive crypted data. Treat it as if it was a connect-time failure.
+ See also the early-pipe equivalent... which will be hard; every call
+ to sync_responses will need to check the result.
+ It would be nicer to have GnuTLS check the cert during the handshake.
+ Can it do that, with all the flexibility we need? */
+
+ tls_errstr = US"error on first read";
+ goto GNUTLS_CONN_FAILED;
+ }
+#else
goto RESPONSE_FAILED;
+#endif
smtp_peer_options = 0;
}
}
#ifdef EXPERIMENTAL_PIPE_CONNECT
case -4: return -1; /* non-2xx for pipelined banner or EHLO */
+ case -5: return -1; /* TLS first-read error */
#endif
}
sx->pending_MAIL = FALSE; /* Dealt with MAIL */
case 1: sx.ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
if (!sx.lmtp) sx.completed_addr = TRUE; /* can't tell about progress yet */
- case 0: break; /* No 2xx or 5xx, but no probs */
+ case 0: break; /* No 2xx or 5xx, but no probs */
- case -1: goto END_OFF; /* Timeout on RCPT */
+ case -1: goto END_OFF; /* Timeout on RCPT */
#ifdef EXPERIMENTAL_PIPE_CONNECT
+ case -5: /* TLS first-read error */
case -4: HDEBUG(D_transport)
debug_printf("failed reaping pipelined cmd responses\n");
#endif
{
case 3: sx.ok = TRUE; /* 2xx & 5xx => OK & progress made */
case 2: sx.completed_addr = TRUE; /* 5xx (only) => progress made */
- break;
+ break;
- case 1: sx.ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
+ case 1: sx.ok = TRUE; /* 2xx (only) => OK, but if LMTP, */
if (!sx.lmtp) sx.completed_addr = TRUE; /* can't tell about progress yet */
- case 0: break; /* No 2xx or 5xx, but no probs */
+ case 0: break; /* No 2xx or 5xx, but no probs */
- case -1: goto END_OFF; /* Timeout on RCPT */
+ case -1: goto END_OFF; /* Timeout on RCPT */
#ifdef EXPERIMENTAL_PIPE_CONNECT
+ case -5: /* TLS first-read error */
case -4: HDEBUG(D_transport)
debug_printf("failed reaping pipelined cmd responses\n");
#endif
- default: goto RESPONSE_FAILED; /* I/O error, or any MAIL/DATA error */
+ default: goto RESPONSE_FAILED; /* I/O error, or any MAIL/DATA error */
}
}
git://git.exim.org / exim.git / blobdiff