{
$pid = $TEST_STATE->{exim_pid};
print "Tidyup: killing wait-mode daemon pid=$pid\n";
- system("sudo kill -SIGINT $pid");
+ system("sudo kill -INT $pid");
}
if (opendir(DIR, "spool"))
chomp($pid = <PID>);
close(PID);
print "Tidyup: killing daemon pid=$pid\n";
- system("sudo rm -f spool/$spool; sudo kill -SIGINT $pid");
+ system("sudo rm -f spool/$spool; sudo kill -INT $pid");
}
}
else
system("sudo /bin/rm -rf ./spool test-* ./dnszones/*")
if ($rc == 0 && !$save_output);
-system("sudo /bin/rm -rf ./eximdir/*");
+system("sudo /bin/rm -rf ./eximdir/*")
+ if (!$save_output);
print "\nYou were in test $test at the end there.\n\n" if defined $test;
exit $rc if ($rc >= 0);
# different protocols; can't rely upon TLS 1.2's AES256-GCM-SHA384, so we
# treat the standard algorithms the same.
# So far, have seen:
+ # TLSv1:AES128-GCM-SHA256:128
# TLSv1:AES256-SHA:256
+ # TLSv1.1:AES256-SHA:256
# TLSv1.2:AES256-GCM-SHA384:256
# TLSv1.2:DHE-RSA-AES256-SHA:256
# TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
# Mail headers (...), log-lines X=..., client-ssl output ...
# (and \b doesn't match between ' ' and '(' )
- s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.2:/$1TLSv1:/xg;
+ s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.[12]:/$1TLSv1:/xg;
+ s/\bAES128-GCM-SHA256:128\b/AES256-SHA:256/g;
+ s/\bAES128-GCM-SHA256\b/AES256-SHA/g;
s/\bAES256-GCM-SHA384\b/AES256-SHA/g;
s/\bDHE-RSA-AES256-SHA\b/AES256-SHA/g;
# GnuTLS have seen:
+ # TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256
+ # TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128
# TLS1.2:RSA_AES_256_CBC_SHA1:256 (canonical)
# TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
#
# X=TLS1.1:RSA_AES_256_CBC_SHA1:256
# X=TLS1.0:DHE_RSA_AES_256_CBC_SHA1:256
# and as stand-alone cipher:
+ # ECDHE-RSA-AES256-SHA
# DHE-RSA-AES256-SHA256
# DHE-RSA-AES256-SHA
# picking latter as canonical simply because regex easier that way.
s/\bDHE_RSA_AES_128_CBC_SHA1:128/RSA_AES_256_CBC_SHA1:256/g;
- s/TLS1.[012]:(DHE_)?RSA_AES_256_CBC_SHA(1|256):256/TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256/g;
- s/\bDHE-RSA-AES256-SHA256\b/DHE-RSA-AES256-SHA/g;
+ s/TLS1.[012]:((EC)?DHE_)?RSA_AES_(256|128)_(CBC|GCM)_SHA(1|256|384):(256|128)/TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256/g;
+ s/\b(ECDHE-RSA-AES256-SHA|DHE-RSA-AES256-SHA256)\b/AES256-SHA/g;
+
+ # GnuTLS library error message changes
+ s/No certificate was found/The peer did not send any certificate/g;
+#(dodgy test?) s/\(certificate verification failed\): invalid/\(gnutls_handshake\): The peer did not send any certificate./g;
+ s/\(gnutls_priority_set\): No or insufficient priorities were set/\(gnutls_handshake\): Could not negotiate a supported cipher suite/g;
+
+ # (this new one is a generic channel-read error, but the testsuite
+ # only hits it in one place)
+ s/TLS error on connection \(gnutls_handshake\): Error in the pull function\./a TLS session is required but an attempt to start TLS failed/g;
+
+ # (replace old with new, hoping that old only happens in one situation)
+ s/TLS error on connection to \d{1,3}(.\d{1,3}){3} \[\d{1,3}(.\d{1,3}){3}\] \(gnutls_handshake\): A TLS packet with unexpected length was received./a TLS session is required for ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4], but an attempt to start TLS failed/g;
+ s/TLS error on connection from \[127.0.0.1\] \(recv\): A TLS packet with unexpected length was received./TLS error on connection from [127.0.0.1] (recv): The TLS connection was non-properly terminated./g;
+
+ # signature algorithm names
+ s/RSA-SHA1/RSA-SHA/;
# ======== Caller's login, uid, gid, home, gecos ========
s/\buid=$parm_caller_uid\b/uid=CALLER_UID/g;
s/\bgid=$parm_caller_gid\b/gid=CALLER_GID/g;
- s/\bname=$parm_caller_gecos\b/name=CALLER_GECOS/g;
+ s/\bname="?$parm_caller_gecos"?/name=CALLER_GECOS/g;
# When looking at spool files with -Mvh, we will find not only the caller
# login, but also the uid and gid. It seems that $) in some Perls gives all
# numbers, or handle specific bad conditions in different ways, leading to
# different wording in the error messages, so we cannot compare them.
- s/(TLS error on connection (?:from|to) .*? \(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
+ s/(TLS error on connection (?:from .* )?\(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
# ======== Maildir things ========
# timestamp output in maildir processing
# other output is fragile; perhaps the debug output should be revised instead.
s%(?<!sqlite)(?<!lsearch\*@)(?<!lsearch\*)(?<!lsearch)[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
+ # ==========================================================
+ # MIME boundaries in RFC3461 DSN messages
+ s/\d{8,10}-eximdsn-\d{8,10}/NNNNNNNNNN-eximdsn-MMMMMMMMMM/;
+
# ==========================================================
# Some munging is specific to the specific file types
next;
}
}
+
+ # openssl version variances
+ next if /^SSL info: unknown state/;
+ next if /^SSL info: SSLv2\/v3 write client hello A/;
+ next if /^SSL info: SSLv3 read server key exchange A/;
+
}
# ======== stderr ========
@saved = ();
}
+ # Skip hosts_require_dane checks when the options
+ # are unset, because dane ain't always there.
+
+ next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
+
# Skip some lines that Exim puts out at the start of debugging output
# because they will be different in different binaries.
for (;;)
{
print "Continue, Show, or Quit? [Q] ";
- $_ = <T>;
+ $_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
log_failure($log_failed_filename, $testno, $rf) if (/^c$/i && $force_continue);
return 0 if /^c$/i;
'gnutls_handshake' =>
{ 'mainlog' => 's/\(gnutls_handshake\): Error in the push function/\(gnutls_handshake\): A TLS packet with unexpected length was received/', },
+ 'tpda' =>
+ { 'stdout' => '/tpda_event_action =/', },
+
};
print ">> killdaemon: recovered pid $pid\n" if $debug;
if ($pid)
{
- run_system("sudo /bin/kill -SIGINT $pid");
+ run_system("sudo /bin/kill -INT $pid");
wait;
}
} else {
$pid = `cat $parm_cwd/spool/exim-daemon.*`;
if ($pid)
{
- run_system("sudo /bin/kill -SIGINT $pid");
+ run_system("sudo /bin/kill -INT $pid");
close DAEMONCMD; # Waits for process
}
}
for ($i = @msglist; $i > 0; $i--) { $args =~ s/\$msg$i/$msglist[$i-1]/g; }
if ( $args =~ /\$msg\d/ )
{
- tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n");
+ tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n")
+ unless $force_continue;
}
}
$_ =~ /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)\s/i)
{
$ip = $1;
- next if ($ip eq "127.0.0.1");
+ next if ($ip =~ /^127\./);
$parm_ipv4 = $ip;
}
open(T, "/dev/tty") || tests_exit(-1, "Failed to open /dev/tty: $!");
print "\nPress RETURN to run the tests: ";
-$_ = <T>;
+$_ = $force_continue ? "c" : <T>;
print "\n";
$lasttestdir = "";
undef %expected_msglogs;
# Open the test's script
-
open(SCRIPT, "scripts/$test") ||
tests_exit(-1, "Failed to open \"scripts/$test\": $!");
+ # Run through the script once to set variables which should be global
+ while (<SCRIPT>)
+ {
+ if (/^no_message_check/) { $message_skip = 1; next; }
+ if (/^no_msglog_check/) { $msglog_skip = 1; next; }
+ if (/^no_stderr_check/) { $stderr_skip = 1; next; }
+ if (/^no_stdout_check/) { $stdout_skip = 1; next; }
+ if (/^rmfiltertest/) { $rmfiltertest = 1; next; }
+ if (/^sortlog/) { $sortlog = 1; next; }
+ }
+ # Reset to beginning of file for per test interpreting/processing
+ seek(SCRIPT, 0, 0);
# The first line in the script must be a comment that is used to identify
# the set of tests as a whole.
while (<SCRIPT>)
{
$lineno++;
+ # Could remove these variable settings because they are already
+ # set above, but doesn't hurt to leave them here.
if (/^no_message_check/) { $message_skip = 1; next; }
if (/^no_msglog_check/) { $msglog_skip = 1; next; }
if (/^no_stderr_check/) { $stderr_skip = 1; next; }
git://git.exim.org / exim.git / blobdiff