Merge branch 'master' of ssh://git.exim.org/home/git/exim

[exim.git] / test / runtest

diff --git a/test/runtest b/test/runtest
index 6623d3b4b62c80d80a5621d1050db7eb640089a9..421e0b3805d3c7db1208eac502f56e0b75541b13 100755 (executable)
--- a/test/runtest
+++ b/test/runtest
@@ -165,7 +165,7 @@ if (exists $TEST_STATE->{exim_pid})
   {
   $pid = $TEST_STATE->{exim_pid};
   print "Tidyup: killing wait-mode daemon pid=$pid\n";
   {
   $pid = $TEST_STATE->{exim_pid};
   print "Tidyup: killing wait-mode daemon pid=$pid\n";

-  system("sudo kill -SIGINT $pid");
+  system("sudo kill -INT $pid");

   }
 
 if (opendir(DIR, "spool"))
   }
 
 if (opendir(DIR, "spool"))


@@ -179,7 +179,7 @@ if (opendir(DIR, "spool"))
     chomp($pid = <PID>);
     close(PID);
     print "Tidyup: killing daemon pid=$pid\n";
     chomp($pid = <PID>);
     close(PID);
     print "Tidyup: killing daemon pid=$pid\n";

-    system("sudo rm -f spool/$spool; sudo kill -SIGINT $pid");
+    system("sudo rm -f spool/$spool; sudo kill -INT $pid");

     }
   }
 else
     }
   }
 else


@@ -193,7 +193,8 @@ close(T);
 system("sudo /bin/rm -rf ./spool test-* ./dnszones/*")
   if ($rc == 0 && !$save_output);
 
 system("sudo /bin/rm -rf ./spool test-* ./dnszones/*")
   if ($rc == 0 && !$save_output);
 

-system("sudo /bin/rm -rf ./eximdir/*");
+system("sudo /bin/rm -rf ./eximdir/*")
+  if (!$save_output);

 
 print "\nYou were in test $test at the end there.\n\n" if defined $test;
 exit $rc if ($rc >= 0);
 
 print "\nYou were in test $test at the end there.\n\n" if defined $test;
 exit $rc if ($rc >= 0);


@@ -496,7 +497,9 @@ RESET_AFTER_EXTRA_LINE_READ:
   # different protocols; can't rely upon TLS 1.2's AES256-GCM-SHA384, so we
   # treat the standard algorithms the same.
   # So far, have seen:
   # different protocols; can't rely upon TLS 1.2's AES256-GCM-SHA384, so we
   # treat the standard algorithms the same.
   # So far, have seen:

+  #   TLSv1:AES128-GCM-SHA256:128

   #   TLSv1:AES256-SHA:256
   #   TLSv1:AES256-SHA:256

+  #   TLSv1.1:AES256-SHA:256

   #   TLSv1.2:AES256-GCM-SHA384:256
   #   TLSv1.2:DHE-RSA-AES256-SHA:256
   #   TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
   #   TLSv1.2:AES256-GCM-SHA384:256
   #   TLSv1.2:DHE-RSA-AES256-SHA:256
   #   TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128


@@ -506,11 +509,15 @@ RESET_AFTER_EXTRA_LINE_READ:
   # Mail headers (...), log-lines X=..., client-ssl output ...
   # (and \b doesn't match between ' ' and '(' )
 
   # Mail headers (...), log-lines X=..., client-ssl output ...
   # (and \b doesn't match between ' ' and '(' )
 

-  s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.2:/$1TLSv1:/xg;
+  s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.[12]:/$1TLSv1:/xg;
+  s/\bAES128-GCM-SHA256:128\b/AES256-SHA:256/g;
+  s/\bAES128-GCM-SHA256\b/AES256-SHA/g;

   s/\bAES256-GCM-SHA384\b/AES256-SHA/g;
   s/\bDHE-RSA-AES256-SHA\b/AES256-SHA/g;
 
   # GnuTLS have seen:
   s/\bAES256-GCM-SHA384\b/AES256-SHA/g;
   s/\bDHE-RSA-AES256-SHA\b/AES256-SHA/g;
 
   # GnuTLS have seen:

+  #   TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256
+  #   TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128

   #   TLS1.2:RSA_AES_256_CBC_SHA1:256 (canonical)
   #   TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
   #
   #   TLS1.2:RSA_AES_256_CBC_SHA1:256 (canonical)
   #   TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
   #


@@ -519,12 +526,29 @@ RESET_AFTER_EXTRA_LINE_READ:
   #   X=TLS1.1:RSA_AES_256_CBC_SHA1:256
   #   X=TLS1.0:DHE_RSA_AES_256_CBC_SHA1:256
   # and as stand-alone cipher:
   #   X=TLS1.1:RSA_AES_256_CBC_SHA1:256
   #   X=TLS1.0:DHE_RSA_AES_256_CBC_SHA1:256
   # and as stand-alone cipher:

+  #   ECDHE-RSA-AES256-SHA

   #   DHE-RSA-AES256-SHA256
   #   DHE-RSA-AES256-SHA
   # picking latter as canonical simply because regex easier that way.
   s/\bDHE_RSA_AES_128_CBC_SHA1:128/RSA_AES_256_CBC_SHA1:256/g;
   #   DHE-RSA-AES256-SHA256
   #   DHE-RSA-AES256-SHA
   # picking latter as canonical simply because regex easier that way.
   s/\bDHE_RSA_AES_128_CBC_SHA1:128/RSA_AES_256_CBC_SHA1:256/g;

-  s/TLS1.[012]:(DHE_)?RSA_AES_256_CBC_SHA(1|256):256/TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256/g;
-  s/\bDHE-RSA-AES256-SHA256\b/DHE-RSA-AES256-SHA/g;
+  s/TLS1.[012]:((EC)?DHE_)?RSA_AES_(256|128)_(CBC|GCM)_SHA(1|256|384):(256|128)/TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256/g;
+  s/\b(ECDHE-RSA-AES256-SHA|DHE-RSA-AES256-SHA256)\b/AES256-SHA/g;
+
+  # GnuTLS library error message changes
+  s/No certificate was found/The peer did not send any certificate/g;
+#(dodgy test?)  s/\(certificate verification failed\): invalid/\(gnutls_handshake\): The peer did not send any certificate./g;
+  s/\(gnutls_priority_set\): No or insufficient priorities were set/\(gnutls_handshake\): Could not negotiate a supported cipher suite/g;
+
+  # (this new one is a generic channel-read error, but the testsuite
+  # only hits it in one place)
+  s/TLS error on connection \(gnutls_handshake\): Error in the pull function\./a TLS session is required but an attempt to start TLS failed/g;
+
+  # (replace old with new, hoping that old only happens in one situation)
+  s/TLS error on connection to \d{1,3}(.\d{1,3}){3} \[\d{1,3}(.\d{1,3}){3}\] \(gnutls_handshake\): A TLS packet with unexpected length was received./a TLS session is required for ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4], but an attempt to start TLS failed/g;
+  s/TLS error on connection from \[127.0.0.1\] \(recv\): A TLS packet with unexpected length was received./TLS error on connection from [127.0.0.1] (recv): The TLS connection was non-properly terminated./g;
+
+  # signature algorithm names
+  s/RSA-SHA1/RSA-SHA/;

 
 
   # ======== Caller's login, uid, gid, home, gecos ========
 
 
   # ======== Caller's login, uid, gid, home, gecos ========


@@ -539,7 +563,7 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/\buid=$parm_caller_uid\b/uid=CALLER_UID/g;
   s/\bgid=$parm_caller_gid\b/gid=CALLER_GID/g;
 
   s/\buid=$parm_caller_uid\b/uid=CALLER_UID/g;
   s/\bgid=$parm_caller_gid\b/gid=CALLER_GID/g;
 

-  s/\bname=$parm_caller_gecos\b/name=CALLER_GECOS/g;
+  s/\bname="?$parm_caller_gecos"?/name=CALLER_GECOS/g;

 
   # When looking at spool files with -Mvh, we will find not only the caller
   # login, but also the uid and gid. It seems that $) in some Perls gives all
 
   # When looking at spool files with -Mvh, we will find not only the caller
   # login, but also the uid and gid. It seems that $) in some Perls gives all


@@ -730,7 +754,7 @@ RESET_AFTER_EXTRA_LINE_READ:
   # numbers, or handle specific bad conditions in different ways, leading to
   # different wording in the error messages, so we cannot compare them.
 
   # numbers, or handle specific bad conditions in different ways, leading to
   # different wording in the error messages, so we cannot compare them.
 

-  s/(TLS error on connection (?:from|to) .*? \(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
+  s/(TLS error on connection (?:from .* )?\(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;

 
   # ======== Maildir things ========
   # timestamp output in maildir processing
 
   # ======== Maildir things ========
   # timestamp output in maildir processing


@@ -780,6 +804,10 @@ RESET_AFTER_EXTRA_LINE_READ:
   # other output is fragile; perhaps the debug output should be revised instead.
   s%(?<!sqlite)(?<!lsearch\*@)(?<!lsearch\*)(?<!lsearch)[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
 
   # other output is fragile; perhaps the debug output should be revised instead.
   s%(?<!sqlite)(?<!lsearch\*@)(?<!lsearch\*)(?<!lsearch)[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
 

+  # ==========================================================
+  # MIME boundaries in RFC3461 DSN messages
+  s/\d{8,10}-eximdsn-\d{8,10}/NNNNNNNNNN-eximdsn-MMMMMMMMMM/;
+

   # ==========================================================
   # Some munging is specific to the specific file types
 
   # ==========================================================
   # Some munging is specific to the specific file types
 


@@ -808,6 +836,12 @@ RESET_AFTER_EXTRA_LINE_READ:
         next;
         }
       }
         next;
         }
       }

+
+    # openssl version variances
+    next if /^SSL info: unknown state/;
+    next if /^SSL info: SSLv2\/v3 write client hello A/;
+    next if /^SSL info: SSLv3 read server key exchange A/;
+

     }
 
   # ======== stderr ========
     }
 
   # ======== stderr ========


@@ -969,6 +1003,11 @@ RESET_AFTER_EXTRA_LINE_READ:
         @saved = ();
         }
 
         @saved = ();
         }
 

+    # Skip hosts_require_dane checks when the options
+    # are unset, because dane ain't always there.
+
+    next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
+

       # Skip some lines that Exim puts out at the start of debugging output
       # because they will be different in different binaries.
 
       # Skip some lines that Exim puts out at the start of debugging output
       # because they will be different in different binaries.
 


@@ -1083,7 +1122,7 @@ if (! -e $sf)
   for (;;)
     {
     print "Continue, Show, or Quit? [Q] ";
   for (;;)
     {
     print "Continue, Show, or Quit? [Q] ";

-    $_ = <T>;
+    $_ = $force_continue ? "c" : <T>;

     tests_exit(1) if /^q?$/i;
     log_failure($log_failed_filename, $testno, $rf) if (/^c$/i && $force_continue);
     return 0 if /^c$/i;
     tests_exit(1) if /^q?$/i;
     log_failure($log_failed_filename, $testno, $rf) if (/^c$/i && $force_continue);
     return 0 if /^c$/i;


@@ -1262,6 +1301,9 @@ $munges =
     'gnutls_handshake' =>
     { 'mainlog' => 's/\(gnutls_handshake\): Error in the push function/\(gnutls_handshake\): A TLS packet with unexpected length was received/', },
 
     'gnutls_handshake' =>
     { 'mainlog' => 's/\(gnutls_handshake\): Error in the push function/\(gnutls_handshake\): A TLS packet with unexpected length was received/', },
 

+    'tpda' =>
+    { 'stdout' => '/tpda_event_action =/', },
+

   };
 
 
   };
 
 


@@ -1714,14 +1756,14 @@ if (/^killdaemon/)
     print ">> killdaemon: recovered pid $pid\n" if $debug;
     if ($pid)
       {
     print ">> killdaemon: recovered pid $pid\n" if $debug;
     if ($pid)
       {

-      run_system("sudo /bin/kill -SIGINT $pid");
+      run_system("sudo /bin/kill -INT $pid");

       wait;
       }
     } else {
     $pid = `cat $parm_cwd/spool/exim-daemon.*`;
     if ($pid)
       {
       wait;
       }
     } else {
     $pid = `cat $parm_cwd/spool/exim-daemon.*`;
     if ($pid)
       {

-      run_system("sudo /bin/kill -SIGINT $pid");
+      run_system("sudo /bin/kill -INT $pid");

       close DAEMONCMD;                                   # Waits for process
       }
     }
       close DAEMONCMD;                                   # Waits for process
       }
     }


@@ -2719,7 +2761,7 @@ while (($parm_ipv4 eq "" || $parm_ipv6 eq "") && ($_ = <IFCONFIG>))
       $_ =~ /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)\s/i)
     {
     $ip = $1;
       $_ =~ /^\s*inet(?:\saddr)?:?\s?(\d+\.\d+\.\d+\.\d+)\s/i)
     {
     $ip = $1;

-    next if ($ip eq "127.0.0.1");
+    next if ($ip =~ /^127\./);

     $parm_ipv4 = $ip;
     }
 
     $parm_ipv4 = $ip;
     }
 


@@ -3252,7 +3294,7 @@ closedir(DIR);
 open(T, "/dev/tty") || tests_exit(-1, "Failed to open /dev/tty: $!");
 
 print "\nPress RETURN to run the tests: ";
 open(T, "/dev/tty") || tests_exit(-1, "Failed to open /dev/tty: $!");
 
 print "\nPress RETURN to run the tests: ";

-$_ = <T>;
+$_ = $force_continue ? "c" : <T>;

 print "\n";
 
 $lasttestdir = "";
 print "\n";
 
 $lasttestdir = "";


@@ -3325,9 +3367,20 @@ foreach $test (@test_list)
   undef %expected_msglogs;
 
   # Open the test's script
   undef %expected_msglogs;
 
   # Open the test's script

-

   open(SCRIPT, "scripts/$test") ||
     tests_exit(-1, "Failed to open \"scripts/$test\": $!");
   open(SCRIPT, "scripts/$test") ||
     tests_exit(-1, "Failed to open \"scripts/$test\": $!");

+  # Run through the script once to set variables which should be global
+  while (<SCRIPT>)
+    {
+    if (/^no_message_check/) { $message_skip = 1; next; }
+    if (/^no_msglog_check/)  { $msglog_skip = 1; next; }
+    if (/^no_stderr_check/)  { $stderr_skip = 1; next; }
+    if (/^no_stdout_check/)  { $stdout_skip = 1; next; }
+    if (/^rmfiltertest/)     { $rmfiltertest = 1; next; }
+    if (/^sortlog/)          { $sortlog = 1; next; }
+    }
+  # Reset to beginning of file for per test interpreting/processing
+  seek(SCRIPT, 0, 0);

 
   # The first line in the script must be a comment that is used to identify
   # the set of tests as a whole.
 
   # The first line in the script must be a comment that is used to identify
   # the set of tests as a whole.


@@ -3350,6 +3403,8 @@ foreach $test (@test_list)
     while (<SCRIPT>)
       {
       $lineno++;
     while (<SCRIPT>)
       {
       $lineno++;

+      # Could remove these variable settings because they are already
+      # set above, but doesn't hurt to leave them here.

       if (/^no_message_check/) { $message_skip = 1; next; }
       if (/^no_msglog_check/)  { $msglog_skip = 1; next; }
       if (/^no_stderr_check/)  { $stderr_skip = 1; next; }
       if (/^no_message_check/) { $message_skip = 1; next; }
       if (/^no_msglog_check/)  { $msglog_skip = 1; next; }
       if (/^no_stderr_check/)  { $stderr_skip = 1; next; }