tidying

[exim.git] / doc / doc-txt / experimental-spec.txt

diff --git a/doc/doc-txt/experimental-spec.txt b/doc/doc-txt/experimental-spec.txt
index 68366a4a944bcf5f15d7f241b6b51a45af8b4ddf..a73007700e6aebb45834ad2c9d63a309d541fecf 100644 (file)
--- a/doc/doc-txt/experimental-spec.txt
+++ b/doc/doc-txt/experimental-spec.txt
@@ -292,62 +292,6 @@ These four steps are explained in more details below.
 
 
 
 
 
 

-SRS (Sender Rewriting Scheme) Support (using libsrs_alt)
---------------------------------------------------------------
-See also the main docs, for an alternative native support implementation.
-
-Exim can be built with SRS support using Miles  Wilton's
-libsrs_alt library. The current version of the supported
-library is 0.5, there are reports of 1.0 working.
-
-In order to  use SRS, you  must get a  copy of libsrs_alt from
-
-https://opsec.eu/src/srs/
-
-(not the original source, which has disappeared.)
-
-Unpack the tarball, then refer to MTAs/README.EXIM
-to proceed. You need to set
-
-EXPERIMENTAL_SRS_ALT=yes
-
-in your Local/Makefile.
-
-The built-in support, included by SUPPORT_SRS,
-shuold *not* be enabled if you wish to use the libsrs_alt
-version.
-
-The following main-section options become available:
-       srs_config              string
-       srs_hashlength          int
-       srs_hashmin             int
-       srs_maxage              int
-       srs_secrets             string
-       srs_usehash             bool
-       srs_usetimestamp        bool
-
-The redirect router gains these options (all of type string, unset by default):
-       srs
-       srs_alias
-       srs_condition
-       srs_dbinsert
-       srs_dbselect
-
-The following variables become available:
-       $srs_db_address
-       $srs_db_key
-       $srs_orig_recipient
-       $srs_orig_sender
-       $srs_recipient
-       $srs_status
-
-The predefined feature-macro _HAVE_SRS will be present.
-Additional delivery log line elements, tagged with "SRS=" will show the srs sender.    
-For configuration information see https://github.com/Exim/exim/wiki/SRS .
-
-
-
-

 DCC Support
 --------------------------------------------------------------
 Distributed Checksum Clearinghouse; http://www.rhyolite.com/dcc/
 DCC Support
 --------------------------------------------------------------
 Distributed Checksum Clearinghouse; http://www.rhyolite.com/dcc/


@@ -554,6 +498,8 @@ Enable using EXPERIMENTAL_ARC=yes in your Local/Makefile.
 You must also have DKIM present (not disabled), and you very likely
 want to have SPF enabled.
 
 You must also have DKIM present (not disabled), and you very likely
 want to have SPF enabled.
 

+It is possible to build as a dynamic-load module: set also SUPPORT_ARC=2.
+

 
 Verification
 --
 
 Verification
 --


@@ -569,7 +515,9 @@ standard header.
   add_header = :at_start:${authresults {<admd-identifier>}}
 
        Note that it would be wise to strip incoming messages of A-R headers
   add_header = :at_start:${authresults {<admd-identifier>}}
 
        Note that it would be wise to strip incoming messages of A-R headers

-       that claim to be from our own <admd-identifier>.
+       that claim to be from our own <admd-identifier>.  Eg:
+
+  remove_header = \N^(?i)Authentication-Results\s*::\s*example.org;\N

 
 There are four new variables:
 
 
 There are four new variables:
 


@@ -666,6 +614,55 @@ and a whitespace-separated port number must be given.
 
 
 
 
 
 

+
+Logging protocol unusual states
+---------------------------------------------------------------
+An extra log_selector, "protocol_detail" has been added in the default build.
+The name may change in future, hence the Experimental status.
+
+Currrently the only effect is to enable logging, under TLS,
+of a TCP RST received directly after a QUIT (in server mode).
+
+Outlook is consistently doing this; not waiting for the SMTP response
+to its QUIT, not properly closing the TLS session and not properly closing
+the TCP connection.  Previously this resulted is an error from SSL_write
+being logged.
+
+
+
+XCLIENT proxy support
+---------------------------------------------------------------
+Per https://www.postfix.org/XCLIENT_README.html
+
+XCLIENT is an ESMTP extension supporting an inbound proxy.
+The only client immplementation known is in Nginx
+(https://nginx.org/en/docs/mail/ngx_mail_proxy_module.html)
+
+If compiled with EXPERIMENTAL_XCLIENT=yes :-
+
+As a server, Exim will advertise XCLIENT support (conditional on a new option
+"hosts_xclient") and service XCLIENT commands with parameters
+  ADDR
+  NAME
+  PORT
+  LOGIN
+  DESTADDR
+  DESTPORT
+A fresh HELO/EHLO is required after a succesful XCLIENT, and the usual
+values are derived from that (making the HELO and PROTO paramemters redundant).
+
+An XCLIENT command must give both ADDR and PORT parameters if no previous
+XCLIENT has succeeded in the SMTP session.
+
+After a success:
+  $proxy_session variable becomes "yes"
+  $proxy_local_address, $proxy_local_port have the proxy "inside" values
+  $proxy_external_address, $proxy_external_port have the proxy "outside" values
+  $sender_host_address, $sender_host_port have the remot client values
+
+
+
+

 --------------------------------------------------------------
 End of file
 --------------------------------------------------------------
 --------------------------------------------------------------
 End of file
 --------------------------------------------------------------