-#! PERL_COMMAND -w
-# $Cambridge: exim/src/src/exigrep.src,v 1.5 2007/02/07 12:23:35 ph10 Exp $
+#! PERL_COMMAND
+use warnings;
use strict;
+BEGIN { pop @INC if $INC[-1] eq '.' };
-# Copyright (c) 2007 University of Cambridge.
+use Pod::Usage;
+use Getopt::Long qw(:config no_ignore_case);
+use File::Basename;
+
+# Copyright (c) 2007-2017 University of Cambridge.
+# Copyright (c) The Exim Maintainers 2020 - 2021
# See the file NOTICE for conditions of use and distribution.
# Except when they appear in comments, the following placeholders in this
# Typical run time acceleration: 4 times
-use Getopt::Std qw(getopts);
use POSIX qw(mktime);
# the number of seconds since the epoch. It handles optional timezone
# information.
-sub seconds {
-my($year,$month,$day,$hour,$min,$sec,$tzs,$tzh,$tzm) =
- $_[0] =~ /^(\d{4})-(\d\d)-(\d\d)\s(\d\d):(\d\d):(\d\d)(?>\s([+-])(\d\d)(\d\d))?/o;
+sub seconds
+ {
+ my($year,$month,$day,$hour,$min,$sec,$tzs,$tzh,$tzm) =
+ $_[0] =~ /^(\d{4})-(\d\d)-(\d\d)\s(\d\d):(\d\d):(\d\d)(?:.\d+)?(?>\s([+-])(\d\d)(\d\d))?/o;
-my $seconds = mktime $sec, $min, $hour, $day, $month - 1, $year - 1900;
+ my $seconds = mktime $sec, $min, $hour, $day, $month - 1, $year - 1900;
-if (defined $tzs)
- {
- $seconds -= $tzh * 3600 + $tzm * 60 if $tzs eq "+";
- $seconds += $tzh * 3600 + $tzm * 60 if $tzs eq "-";
- }
+ if (defined $tzs)
+ {
+ $seconds -= $tzh * 3600 + $tzm * 60 if $tzs eq "+";
+ $seconds += $tzh * 3600 + $tzm * 60 if $tzs eq "-";
+ }
-return $seconds;
-}
+ return $seconds;
+ }
# This subroutine processes a single line (in $_) from a log file. Program
# defensively against short lines finding their way into the log.
-my (%saved, %id_list, $pattern, $queue_time, $insensitive);
+my (%saved, %id_list, $pattern);
-sub do_line {
+my $queue_time = -1;
+my $insensitive = 1;
+my $invert = 0;
+my $related = 0;
+my $use_pager = 1;
+my $literal = 0;
-# Convert syslog lines to mainlog format, as in eximstats.
-if (!/^\d{4}-/o) { $_ =~ s/^.*? exim\b.*?: //o; }
+# If using "related" option, have to track extra message IDs
+my $related_re='';
+my @Mids = ();
-return unless
- my($date,$id) = /^(\d{4}-\d\d-\d\d \d\d:\d\d:\d\d (?:[+-]\d{4} )?)(\w{6}\-\w{6}\-\w{2})?/o;
+sub do_line
+ {
-# Handle the case when the log line belongs to a specific message. We save
-# lines for specific messages until the message is complete. Then either print
-# or discard.
+ # Convert syslog lines to mainlog format, as in eximstats.
-if (defined $id)
- {
- $saved{$id} = '' unless defined($saved{$id});
+ if (!/^\d{4}-/o) { $_ =~ s/^.*? exim\b.*?: //o; }
- # Save up the data for this message in case it becomes interesting later.
+ return unless
+ my($date,$id) = /^(\d{4}-\d\d-\d\d \d\d:\d\d:\d\d(?:\.\d+)? (?:[+-]\d{4} )?)(?:\[\d+\] )?(\w{6}\-\w{6}\-\w{2})?/o;
- $saved{$id} .= $_;
+ # Handle the case when the log line belongs to a specific message. We save
+ # lines for specific messages until the message is complete. Then either print
+ # or discard.
- # Are we interested in this id ? Short circuit if we already were interested.
+ if (defined $id)
+ {
+ $saved{$id} = '' unless defined($saved{$id});
- $id_list{$id} = 1 if defined $id_list{$id} ||
- ($insensitive && /$pattern/io) || /$pattern/o;
+ # Save up the data for this message in case it becomes interesting later.
- # See if this is a completion for some message. If it is interesting,
- # print it, but in any event, throw away what was saved.
+ $saved{$id} .= $_;
- if (index($_, 'Completed') != -1 ||
- (index($_, 'rejected') != -1 &&
- /rejected (?:by local_scan|by non-SMTP ACL|after DATA)/o))
- {
- if ($queue_time != -1 &&
- $saved{$id} =~ /^(\d{4}-\d\d-\d\d \d\d:\d\d:\d\d ([+-]\d{4} )?)/o)
+ # Are we interested in this id ? Short circuit if we already were interested.
+
+ if ($invert)
+ {
+ $id_list{$id} = 1 if (!defined($id_list{$id}));
+ $id_list{$id} = 0 if (($insensitive && /$pattern/io) || /$pattern/o);
+ }
+ else
{
- my $old_sec = &seconds($1);
- my $sec = &seconds($date);
- delete $id_list{$id} if $id_list{$id} && $sec - $old_sec <= $queue_time;
+ if (defined $id_list{$id} ||
+ ($insensitive && /$pattern/io) || /$pattern/o)
+ {
+ $id_list{$id} = 1;
+ get_related_ids($id) if $related;
+ }
+ elsif ($related && $related_re)
+ {
+ grep_for_related($_, $id);
+ }
}
- if ($id_list{$id})
+ # See if this is a completion for some message. If it is interesting,
+ # print it, but in any event, throw away what was saved.
+
+ if (index($_, 'Completed') != -1 ||
+ index($_, 'SMTP data timeout') != -1 ||
+ (index($_, 'rejected') != -1 &&
+ /^(\d{4}-\d\d-\d\d \d\d:\d\d:\d\d(?:\.\d+)? (?:[+-]\d{4} )?)(?:\[\d+\] )?\w{6}\-\w{6}\-\w{2} rejected/o))
{
+ if ($queue_time != -1 &&
+ $saved{$id} =~ /^(\d{4}-\d\d-\d\d \d\d:\d\d:\d\d ([+-]\d{4} )?)/o)
+ {
+ my $old_sec = &seconds($1);
+ my $sec = &seconds($date);
+ $id_list{$id} = 0 if $id_list{$id} && $sec - $old_sec <= $queue_time;
+ }
+
+ print "$saved{$id}\n" if ($id_list{$id});
delete $id_list{$id};
- print "$saved{$id}\n";
+ delete $saved{$id};
}
-
- delete $saved{$id};
}
+
+ # Handle the case where the log line does not belong to a specific message.
+ # Print it if it is interesting.
+
+ elsif ( ($invert && (($insensitive && !/$pattern/io) || !/$pattern/o)) ||
+ (!$invert && (($insensitive && /$pattern/io) || /$pattern/o)) )
+ { print "$_\n"; }
}
-# Handle the case where the log line does not belong to a specific message.
-# Print it if it is interesting.
+# Rotated log files are frequently compressed and there are a variety of
+# formats it could be compressed with. Rather than use just one that is
+# detected and hardcoded at Exim compile time, detect and use what the
+# logfile is compressed with on the fly.
+#
+# List of known compression extensions and their associated commands:
+my $compressors = {
+ gz => { cmd => 'zcat', args => '' },
+ bz2 => { cmd => 'bzcat', args => '' },
+ xz => { cmd => 'xzcat', args => '' },
+ lzma => { cmd => 'lzma', args => '-dc' },
+ zst => { cmd => 'zstdcat', args => '' },
+};
+my $csearch = 0;
+
+sub detect_compressor_bin
+ {
+ my $ext = shift();
+ my $c = $compressors->{$ext}->{cmd};
+ $compressors->{$ext}->{bin} = `which $c 2>/dev/null`;
+ chomp($compressors->{$ext}->{bin});
+ }
-elsif (($insensitive && $_ =~ /$pattern/io) || $_ =~ /$pattern/o)
- { print "$_\n"; }
-}
+sub detect_compressor_capable
+ {
+ my $filename = shift();
+ map { &detect_compressor_bin($_) } keys %$compressors
+ if (!$csearch);
+ $csearch = 1;
+ return undef
+ unless (grep {$filename =~ /\.(?:$_)$/} keys %$compressors);
+ # Loop through them, figure out which one it detected,
+ # and build the commandline.
+ my $cmdline = undef;
+ foreach my $ext (keys %$compressors)
+ {
+ if ($filename =~ /\.(?:$ext)$/)
+ {
+ # Just die if compressor not found; if this occurs in the middle of
+ # two valid files with a lot of matches, error could easily be missed.
+ die("Didn't find $ext decompressor for $filename\n")
+ if ($compressors->{$ext}->{bin} eq '');
+ $cmdline = $compressors->{$ext}->{bin} ." ".
+ $compressors->{$ext}->{args};
+ last;
+ }
+ }
+ return $cmdline;
+ }
+sub grep_for_related
+ {
+ my ($line,$id) = @_;
+ $id_list{$id} = 1 if $line =~ m/$related_re/;
+ }
+
+sub get_related_ids
+ {
+ my ($id) = @_;
+ push @Mids, $id unless grep /\b$id\b/, @Mids;
+ my $re = join '|', @Mids;
+ $related_re = qr/$re/;
+ }
# The main program. Extract the pattern and make sure any relevant characters
# are quoted if the -l flag is given. The -t flag gives a time-on-queue value
-# which is an additional condition.
-
-getopts('Ilt:',\my %args);
-$queue_time = $args{'t'}? $args{'t'} : -1;
-$insensitive = $args{'I'}? 0 : 1;
-
-die "usage: exigrep [-I] [-l] [-t <seconds>] <pattern> [<log file>]...\n"
- if ($#ARGV < 0);
+# which is an additional condition. The -M flag will also display "related"
+# loglines (msgid from matched lines is searched in following lines).
+
+GetOptions(
+ 'I|sensitive' => sub { $insensitive = 0 },
+ 'l|literal' => \$literal,
+ 'M|related' => \$related,
+ 't|queue-time=i' => \$queue_time,
+ 'pager!' => \$use_pager,
+ 'v|invert' => \$invert,
+ 'h|help' => sub { pod2usage(-exit => 0, -verbose => 1) },
+ 'm|man' => sub {
+ pod2usage(
+ -exit => 0,
+ -verbose => 2,
+ -noperldoc => system('perldoc -V 2>/dev/null >&2')
+ );
+ },
+ 'version' => sub {
+ print basename($0) . ": $0\n",
+ "build: EXIM_RELEASE_VERSIONEXIM_VARIANT_VERSION\n",
+ "perl(runtime): $]\n";
+ exit 0;
+ },
+) and @ARGV or pod2usage;
$pattern = shift @ARGV;
-$pattern = quotemeta $pattern if $args{l};
+$pattern = quotemeta $pattern if $literal;
+# Start a pager if output goes to a terminal
+if (-t 1 and $use_pager)
+ {
+ # for perl >= v5.10.x: foreach ($ENV{PAGER}//(), 'less', 'more')
+ foreach (defined $ENV{PAGER} ? $ENV{PAGER} : (), 'less', 'more')
+ {
+ local $ENV{LESS} .= ' --no-init --quit-if-one-screen';
+ open(my $pager, '|-', $_) or next;
+ select $pager;
+ last;
+ }
+ }
# If file arguments are given, open each one and process according as it is
# is compressed or not.
foreach (@ARGV)
{
my $filename = $_;
- if ($filename =~ /\.(?:COMPRESS_SUFFIX)$/o)
+ if (-x 'ZCAT_COMMAND' && $filename =~ /\.(?:COMPRESS_SUFFIX)$/o)
{
open(LOG, "ZCAT_COMMAND $filename |") ||
die "Unable to zcat $filename: $!\n";
}
+ elsif (my $cmdline = &detect_compressor_capable($filename))
+ {
+ open(LOG, "$cmdline $filename |") ||
+ die "Unable to decompress $filename: $!\n";
+ }
else
{
open(LOG, "<$filename") || die "Unable to open $filename: $!\n";
else { do_line() while (<STDIN>); }
-# At the end of processing all the input, print any uncompleted data
+# At the end of processing all the input, print any uncompleted messages.
+
+for (keys %id_list)
+ {
+ print "+++ $_ has not completed +++\n$saved{$_}\n";
+ }
+
+__END__
+
+=head1 NAME
+
+exigrep - search Exim's main log
+
+=head1 SYNOPSIS
+
+B<exigrep> [options] pattern [log] ...
+
+=head1 DESCRIPTION
+
+The B<exigrep> utility is a Perl script that searches one or more main log
+files for entries that match a given pattern. When it finds a match,
+it extracts all the log entries for the relevant message, not just
+those that match the pattern. Thus, B<exigrep> can extract complete log
+entries for a given message, or all mail for a given user, or for a
+given host, for example.
+
+If no file names are given on the command line, the standard input is read.
+
+For known file extensions indicating compression (F<.gz>, F<.bz2>, F<.xz>,
+F<.lzma>, and F<.zst>) a suitable de-compressor is used, if available.
+
+The output is sent through a pager if a terminal is connected to STDOUT. As
+pager are considered: C<$ENV{PAGER}>, C<less>, C<more>.
+
+=head1 OPTIONS
+
+=over
+
+=item B<-l>|B<--literal>
+
+This means 'literal', that is, treat all characters in the
+pattern as standing for themselves. Otherwise the pattern must be a
+Perl regular expression. The pattern match is case-insensitive.
+
+=item B<-t>|B<--queue-time> I<seconds>
+
+Limit the output to messages that spent at least I<seconds> in the
+queue.
+
+=item B<-I>|B<--sensitive>
+
+Do a case sensitive search.
+
+=item B<-v>|B<--invert>
+
+Invert the meaning of the search pattern. That is, print message log
+entries that are not related to that pattern.
+
+=item B<-M>|B<--related>
+
+Search for related messages too.
+
+=item B<--no-pager>
+
+Do not use a pager, even if STDOUT is connected to a terminal.
+
+=item B<-h>|B<--help>
+
+Print a short reference help. For more detailed help try L<exigrep(8)>,
+or C<exigrep --man>.
+
+=item B<-m>|B<--man>
+
+Print this manual page of B<exigrep>.
+
+=back
+
+=head1 SEE ALSO
+
+L<exim(8)>, L<perlre(1)>, L<Exim|http://exim.org/>
+
+=head1 AUTHOR
-for (keys %id_list) { print "+++ $_ not completed +++\n$saved{$_}\n"; }
+This manual page was stitched together from spec.txt by Andreas Metzler L<ametzler at downhill.at.eu.org>
+and updated by Heiko Schlittermann L<hs@schlittermann.de>.
-# End of exigrep
+=cut
git://git.exim.org / exim.git / blobdiff