.next
Individual routers can be explicitly skipped when running the routers to
check an address given in the SMTP EXPN command (see the &%expn%& option).
+
.next
If the &%domains%& option is set, the domain of the address must be in the set
of domains that it defines.
+.new
+.cindex "tainted data" "de-tainting"
+A match verifies the variable &$domain$& (which carries tainted data)
+and assigns an untainted value to the &$domain_data$& variable.
+Such an untainted value is often needed in the transport.
+For specifics of the matching operation and the resulting untainted value,
+refer to section &<<SECTdomainlist>>&.
+
+When an untainted value is wanted, use this option
+rather than the generic &%condition%& option.
+.wen
+
.next
.vindex "&$local_part_prefix$&"
.vindex "&$local_part_prefix_v$&"
.vindex "&$local_part_suffix_v$&"
.cindex affix "router precondition"
If the &%local_parts%& option is set, the local part of the address must be in
-the set of local parts that it defines. If &%local_part_prefix%& or
+the set of local parts that it defines.
+.new
+A match verifies the variable &$local_part$& (which carries tainted data)
+and assigns an untainted value to the &$local_part_data$& variable.
+Such an untainted value is often needed in the transport.
+For specifics of the matching operation and the resulting untainted value,
+refer to section &<<SECTlocparlis>>&.
+
+When an untainted value is wanted, use this option
+rather than the generic &%condition%& option.
+.wen
+
+If &%local_part_prefix%& or
&%local_part_suffix%& is in use, the prefix or suffix is removed from the local
part before this check. If you want to do precondition tests on local parts
that include affixes, you can do so by using a &%condition%& option (see below)
that uses the variables &$local_part$&, &$local_part_prefix$&,
&$local_part_prefix_v$&, &$local_part_suffix$&
and &$local_part_suffix_v$& as necessary.
+
.next
.vindex "&$local_user_uid$&"
.vindex "&$local_user_gid$&"
local user are placed in &$local_user_uid$& and &$local_user_gid$& and the
user's home directory is placed in &$home$&; these values can be used in the
remaining preconditions.
+
.next
If the &%router_home_directory%& option is set, it is expanded at this point,
because it overrides the value of &$home$&. If this expansion were left till
later, the value of &$home$& as set by &%check_local_user%& would be used in
subsequent tests. Having two different values of &$home$& in the same router
could lead to confusion.
+
.next
If the &%senders%& option is set, the envelope sender address must be in the
set of addresses that it defines.
+
.next
If the &%require_files%& option is set, the existence or non-existence of
specified files is tested.
+
.next
.cindex "customizing" "precondition"
If the &%condition%& option is set, it is evaluated and tested. This option
uses an expanded string to allow you to set up your own custom preconditions.
Expanded strings are described in chapter &<<CHAPexpand>>&.
+
+.new
+Note that while using
+this option for address matching technically works,
+it does not set any de-tainted values.
+Such values are often needed, either for router-specific options or
+for transport options.
+Using the &%domains%& and &%local_parts%& options is usually the most
+convenient way to obtain them.
+.wen
.endlist
by Exim in conjunction with the &%-MC%& option, and passes on the fact that the
host to which Exim is connected supports TLS encryption.
+.new
+.vitem &%-MCr%&&~<&'SNI'&> &&&
+ &%-MCs%&&~<&'SNI'&>
+.oindex "&%-MCs%&"
+.oindex "&%-MCr%&"
+These options are not intended for use by external callers. It is used internally
+by Exim in conjunction with the &%-MCt%& option, and passes on the fact that
+a TLS Server Name Indication was sent as part of the channel establishment.
+The argument gives the SNI string.
+The "r" variant indicates a DANE-verified connection.
+.wen
+
.vitem &%-MCt%&&~<&'IP&~address'&>&~<&'port'&>&~<&'cipher'&>
.oindex "&%-MCt%&"
This option is not intended for use by external callers. It is used internally
in chapter &<<CHAPinterfaces>>&. When &%-oX%& is used to start a daemon, no pid
file is written unless &%-oP%& is also present to specify a pid filename.
+.new
+.vitem &%-oY%&
+.oindex &%-oY%&
+.cindex "daemon notifier socket"
+This option controls the creation of an inter-process communications endpoint
+by the Exim daemon.
+It is only relevant when the &%-bd%& (start listening daemon) option is also
+given.
+Normally the daemon creates this socket, unless a &%-oX%& and &*no*& &%-oP%&
+option is also present.
+If this option is given then the socket will not be created. This could be
+required if the system is running multiple daemons.
+
+The socket is currently used for
+.ilist
+fast ramp-up of queue runner processes
+.next
+obtaining a current queue size
+.endlist
+.wen
+
.vitem &%-pd%&
.oindex "&%-pd%&"
.cindex "Perl" "starting the interpreter"
lookup. Lookups of this type are conditional expansion items. Different results
can be defined for the cases of lookup success and failure. See chapter
&<<CHAPexpand>>&, where string expansions are described in detail.
-The key for the lookup is specified as part of the string expansion.
+The key for the lookup is &*specified*& as part of the string expansion.
.next
Lists of domains, hosts, and email addresses can contain lookup requests as a
way of avoiding excessively long linear lists. In this case, the data that is
returned by the lookup is often (but not always) discarded; whether the lookup
succeeds or fails is what really counts. These kinds of list are described in
chapter &<<CHAPdomhosaddlists>>&.
-The key for the lookup is given by the context in which the list is expanded.
+The key for the lookup is &*implicit*&,
+given by the context in which the list is expanded.
.endlist
String expansions, lists, and lookups interact with each other in such a way
In the second example, the lookup is a single item in a domain list. It causes
Exim to use a lookup to see if the domain that is being processed can be found
-in the file. The file could contains lines like this:
+in the file.
+The file could contains lines like this:
.code
domain1:
domain2:
The lookup type may optionally be followed by a comma
and a comma-separated list of options.
Each option is a &"name=value"& pair.
-Whether an option is meaningful depands on the lookup type.
+Whether an option is meaningful depends on the lookup type.
All lookups support the option &"cache=no_rd"&.
If this is given then the cache that Exim manages for lookup results
-is not checked before diong the lookup.
+is not checked before doing the lookup.
The result of the lookup is still written to the cache.
.wen
&*Warning 3*&: Do not use an IPv4-mapped IPv6 address for a key; use the
IPv4, in dotted-quad form. (Exim converts IPv4-mapped IPv6 addresses to this
notation before executing the lookup.)
+
+.new
+One option is supported, "ret=full", to request the return of the entire line
+rather than omitting the key porttion.
+Note however that the key portion will have been de-quoted.
+.wen
+
.next
.cindex lookup json
.cindex json "lookup type"
.cindex "sqlite lookup type"
.cindex "lookup" "sqlite"
&(sqlite)&: The format of the query is
-new
-an optional filename
-followed by an SQL statement
-that is passed to an SQLite database. See section &<<SECTsqlite>>&.
+an SQL statement that is passed to an SQLite database. See section &<<SECTsqlite>>&.
.next
&(testdb)&: This is a lookup type that is used for testing Exim. It is
${lookup pgsql,servers=master/db/name/pw {UPDATE ...} }
.endd
-An older syntax places the servers speciification before the qury,
+An older syntax places the servers specification before the query,
semicolon separated:
.code
${lookup mysql{servers=master; UPDATE ...} }
addition to the SQL query. An SQLite database is a single file, and there is no
daemon as in the other SQL databases.
+.new
.oindex &%sqlite_dbfile%&
-The preferred way of specifying the file is by using the
-&%sqlite_dbfile%& option, set to
-an absolute path.
+There are two ways of
+specifying the file.
+The first is is by using the &%sqlite_dbfile%& main option.
+The second, which allows separate files for each query,
+is to use an option appended, comma-separated, to the &"sqlite"&
+lookup type word. The option is the word &"file"&, then an equals,
+then the filename.
+The filename in this case cannot contain whitespace or open-brace charachters.
+.wen
+
A deprecated method is available, prefixing the query with the filename
separated by white space.
-This means that the path name cannot contain white space.
+This means that
.cindex "tainted data" "sqlite file"
-It also means that the query cannot use any tainted values, as that taints
+the query cannot use any tainted values, as that taints
the entire query including the filename - resulting in a refusal to open
the file.
+In all the above cases the filename must be an absolute path.
+
Here is a lookup expansion example:
.code
sqlite_dbfile = /some/thing/sqlitedb
A &%local_parts%& router option or &%local_parts%& ACL condition
will store a result in the &$local_part_data$& variable.
.vitem domains
+.new
A &%domains%& router option or &%domains%& ACL condition
+will store a result in the &$domain_data$& variable
+.wen
.vitem senders
A &%senders%& router option or &%senders%& ACL condition
will store a result in the &$sender_data$& variable.
.cindex "tainted data" "de-tainting"
Note that this is commonly untainted
(depending on the way the list was created).
+Specifically, explicit text in the configuration file in not tainted.
This is a useful way of obtaining an untainted equivalent to
the domain, for later operations.
+
+However if the list (including one-element lists)
+is created by expanding a variable containing tainted data,
+it is tainted and so will the match value be.
.endlist
.section "Local part lists" "SECTlocparlis"
.cindex "list" "local part list"
.cindex "local part" "list"
+These behave in the same way as domain and host lists, with the following
+changes:
+
Case-sensitivity in local part lists is handled in the same way as for address
lists, as just described. The &"+caseful"& item can be used if required. In a
setting of the &%local_parts%& option in a router with &%caseful_local_part%&
conditions do not expand some of the brace-delimited branches, for security
reasons,
.cindex "tainted data" expansion
+.cindex "tainted data" definition
.cindex expansion "tainted data"
and expansion of data deriving from the sender (&"tainted data"&)
-is not permitted.
+.new
+is not permitted (including acessing a file using a tainted name).
+.wen
+
+.new
+Common ways of obtaining untainted equivalents of variables with
+tainted values
+.cindex "tainted data" "de-tainting"
+come down to using the tainted value as a lookup key in a trusted database.
+This database could be the filesystem structure,
+or the password file,
+or accessed via a DBMS.
+Specific methods are indexed under &"de-tainting"&.
+.wen
those headers that contain lists of addresses, a comma is also inserted at the
junctions between headers. This does not happen for the &%rheader%& expansion.
-.cindex "tainted data"
+.cindex "tainted data" "message headers"
When the headers are from an incoming message,
the result of expanding any of these variables is tainted.
.new
-.vitem &*${listquote{*&<&'separator'&>&*}{*&<&'string'&>&*}}*"
-.citem quoting "for list"
-.citem list quoting
+.vitem &*${listquote{*&<&'separator'&>&*}{*&<&'string'&>&*}}*&
+.cindex quoting "for list"
+.cindex list quoting
This item doubles any occurrence of the separator character
in the given string.
An empty string is replaced with a single space.
.wen
-.vitem "&*${lookup{*&<&'key'&>&*}&~*&<&'search&~type'&>&*&~&&&
- {*&<&'file'&>&*}&~{*&<&'string1'&>&*}&~{*&<&'string2'&>&*}}*&"
-This is the first of one of two different types of lookup item, which are both
-described in the next item.
-
-.vitem "&*${lookup&~*&<&'search&~type'&>&*&~{*&<&'query'&>&*}&~&&&
+.vitem "&*${lookup&~{*&<&'key'&>&*}&~*&<&'search&~type'&>&*&~&&&
+ {*&<&'file'&>&*}&~{*&<&'string1'&>&*}&~{*&<&'string2'&>&*}}*&" &&&
+ "&*${lookup&~*&<&'search&~type'&>&*&~{*&<&'query'&>&*}&~&&&
{*&<&'string1'&>&*}&~{*&<&'string2'&>&*}}*&"
.cindex "expansion" "lookup in"
.cindex "file" "lookups"
is done by calling the &[stat()]& function. The use of the &%exists%& test in
users' filter files may be locked out by the system administrator.
+.new
+&*Note:*& Testing a path using this condition is not a sufficient way of
+de-tainting it.
+.wen
+
.vitem &*first_delivery*&
.cindex "delivery" "first"
.cindex "first delivery"
.cindex "tainted data"
If the origin of the data is an incoming message,
-the result of expanding this variable is tainted.
-When un untainted version is needed, one should be obtained from
+the result of expanding this variable is tainted and may not
+be further expanded or used as a filename.
+When an untainted version is needed, one should be obtained from
looking up the value in a local (therefore trusted) database.
Often &$domain_data$& is usable in this role.
.vitem &$domain_data$&
.vindex "&$domain_data$&"
-When the &%domains%& option on a router matches a domain by
-means of a lookup, the data read by the lookup is available during the running
-of the router as &$domain_data$&. In addition, if the driver routes the
+When the &%domains%& condition on a router
+.new
+or an ACL
+matches a domain
+against a list, the match value is copied to &$domain_data$&.
+This is an enhancement over previous versions of Exim, when it only
+applied to the data read by a lookup.
+For details on match values see section &<<SECTlistresults>>& et. al.
+.wen
+
+If the router routes the
address to a transport, the value is available in that transport. If the
transport is handling multiple addresses, the value from the first address is
used.
-&$domain_data$& is also set when the &%domains%& condition in an ACL matches a
-domain by means of a lookup. The data read by the lookup is available during
-the rest of the ACL statement. In all other situations, this variable expands
-to nothing.
+&$domain_data$& set in an ACL is available during
+the rest of the ACL statement.
.vitem &$exim_gid$&
.vindex "&$exim_gid$&"
.cindex "tainted data"
If the origin of the data is an incoming message,
-the result of expanding this variable is tainted.
+the result of expanding this variable is tainted and
+may not be further expanded or used as a filename.
&*Warning*&: the content of this variable is usually provided by a potential
attacker.
.vitem &$local_part_data$&
.vindex "&$local_part_data$&"
-When the &%local_parts%& option on a router matches a local part by means of a
-lookup, the data read by the lookup is available during the running of the
-router as &$local_part_data$&. In addition, if the driver routes the address
-to a transport, the value is available in that transport. If the transport is
-handling multiple addresses, the value from the first address is used.
+When the &%local_parts%& condition on a router or ACL
+matches a local part list
+.new
+the match value is copied to &$local_part_data$&.
+This is an enhancement over previous versions of Exim, when it only
+applied to the data read by a lookup.
+For details on match values see section &<<SECTlistresults>>& et. al.
+.wen
The &%check_local_user%& router option also sets this variable.
-&$local_part_data$& is also set when the &%local_parts%& condition in an ACL
-matches a local part by means of a lookup. The data read by the lookup is
-available during the rest of the ACL statement. In all other situations, this
-variable expands to nothing.
-
.vindex &$local_part_prefix$& &&&
&$local_part_prefix_v$& &&&
&$local_part_suffix$& &&&
.cindex "spool" "number of messages"
This variable contains the number of messages queued.
It is evaluated on demand, but no more often than once every minute.
+If there is no daemon notifier socket open, the value will be
+an empty string.
.vitem &$r_...$&
.vindex &$r_...$&
.vindex "&$tls_in_sni$&"
.vindex "&$tls_sni$&"
.cindex "TLS" "Server Name Indication"
+.cindex "TLS" SNI
+.cindex SNI "observability on server"
When a TLS session is being established, if the client sends the Server
Name Indication extension, the value will be placed in this variable.
If the variable appears in &%tls_certificate%& then this option and
.vitem &$tls_out_sni$&
.vindex "&$tls_out_sni$&"
.cindex "TLS" "Server Name Indication"
+.cindex "TLS" SNI
+.cindex SNI "observability in client"
During outbound
SMTP deliveries, this variable reflects the value of the &%tls_sni%& option on
the transport.
option to a true value. To avoid breaking existing installations, it
defaults to false.
+.new
+&*Note*&: This is entirely separate from Exim's tainted-data tracking.
+.wen
+
.section "Calling Perl subroutines" "SECID86"
When the configuration file includes a &%perl_startup%& option you can make use
.row &%local_scan_timeout%& "timeout for &[local_scan()]&"
.row &%message_size_limit%& "for all messages"
.row &%percent_hack_domains%& "recognize %-hack for these domains"
+.row &%proxy_protocol_timeout%& "timeout for proxy protocol negotiation"
.row &%spamd_address%& "set interface to SpamAssassin"
.row &%strict_acl_vars%& "object to unset ACL variables"
.row &%spf_smtp_comment_template%& "template for &$spf_smtp_comment$&"
The option is expanded before use.
If the platform supports Linux-style abstract socket names, the result
is used with a nul byte prefixed.
-Otherwise, it should be a full path name and use a directory accessible
+Otherwise,
+.new "if nonempty,"
+it should be a full path name and use a directory accessible
to Exim.
-If the Exim command line uses a &%-oX%& option and does not use &%-oP%&
+.new
+If this option is set as empty,
+or the command line &%-oY%& option is used, or
+.wen
+the command line uses a &%-oX%& option and does not use &%-oP%&,
then a notifier socket is not created.
&%queue_list_requires_admin%& and &%commandline_checks_require_admin%&.
+.new
+.option proxy_protocol_timeout main time 3s
+.cindex proxy "proxy protocol"
+This option sets the timeout for proxy protocol negotiation.
+For details see section &<<SECTproxyInbound>>&.
+.wen
+
+
.option qualify_domain main string "see below"
.cindex "domain" "for qualifying addresses"
.cindex "address" "qualification"
deliveries if the configuration allows a delivery attempt as soon as a message
is received.
+See also the &%max_parallel%& generic transport option,
+and the &%serialize_hosts%& smtp transport option.
+
.cindex "number of deliveries"
.cindex "delivery" "maximum number of"
If you want to control the total number of deliveries on the system, you
.option syslog_timestamp main boolean true
.cindex "syslog" "timestamps"
+.cindex timestamps syslog
If &%syslog_timestamp%& is set false, the timestamps on Exim's log lines are
omitted when these lines are sent to syslog. See chapter &<<CHAPlog>>& for
details of Exim's logging.
file is used, the &$tls_in_ourcert$& variable is unreliable.
The macro "_TLS_BAD_MULTICERT_IN_OURCERT" will be defined for those versions.
+.cindex SNI "selecting server certificate based on"
If the option contains &$tls_out_sni$& and Exim is built against OpenSSL, then
if the OpenSSL build supports TLS extensions and the TLS client sends the
Server Name Indication extension, then this option and others documented in
the value is a file then the certificates are sent by Exim as a server to
connecting clients, defining the list of accepted certificate authorities.
Thus the values defined should be considered public data. To avoid this,
-use the explicit directory version.
+use the explicit directory version. (If your peer is Exim up to 4.85,
+using GnuTLS, you may need to send the CAs (thus using the file
+variant). Otherwise the peer doesn't send its certificate.)
See &<<SECTtlssni>>& for discussion of when this option might be re-expanded.
local system. The check is done by calling the &[getpwnam()]& function rather
than trying to read &_/etc/passwd_& directly. This means that other methods of
holding password data (such as NIS) are supported. If the local part is a local
-user, &$home$& is set from the password data, and can be tested in other
+user,
+.cindex "tainted data" "de-tainting"
+&$local_part_data$& is set to an untainted version of the local part and
+&$home$& is set from the password data. The latter can be tested in other
preconditions that are evaluated after this one (the order of evaluation is
given in section &<<SECTrouprecon>>&). However, the value of &$home$& can be
overridden by &%router_home_directory%&. If the local part is not a local user,
If this option is set, the router is skipped unless the current domain matches
the list. If the match is achieved by means of a file lookup, the data that the
lookup returned for the domain is placed in &$domain_data$& for use in string
-expansions of the driver's private options. See section &<<SECTrouprecon>>& for
+expansions of the driver's private options and in the transport.
+See section &<<SECTrouprecon>>& for
a list of the order in which preconditions are evaluated.
string is expanded, it is possible to make it depend on the domain, for
example:
.code
-local_parts = dbm;/usr/local/specials/$domain
+local_parts = dbm;/usr/local/specials/$domain_data
.endd
.vindex "&$local_part_data$&"
If the match is achieved by a lookup, the data that the lookup returned
for the local part is placed in the variable &$local_part_data$& for use in
-expansions of the router's private options. You might use this option, for
+expansions of the router's private options or in the transport.
+You might use this option, for
example, if you have a large number of local virtual domains, and you want to
send all postmaster mail to the same place without having to set up an alias in
each virtual domain:
.option command_timeout smtp time 5m
+.cindex timeout "smtp transport command"
This sets a timeout for receiving a response to an SMTP command that has been
sent out. It is also used when waiting for the initial banner line from the
remote host. Its value must not be zero.
.option connect_timeout smtp time 5m
+.cindex timeout "smtp transport connect"
This sets a timeout for the &[connect()]& function, which sets up a TCP/IP call
to a remote host. A setting of zero allows the system timeout (typically
several minutes) to act. To have any effect, the value of this option must be
.option data_timeout smtp time 5m
+.cindex timeout "for transmitted SMTP data blocks"
This sets a timeout for the transmission of each block in the data portion of
the message. As a result, the overall timeout for a message depends on the size
of the message. Its value must not be zero. See also &%final_timeout%&.
.option final_timeout smtp time 10m
+.cindex timeout "for transmitted SMTP data accept"
This is the timeout that applies while waiting for the response to the final
line containing just &"."& that terminates a message. Its value must not be
zero.
.cindex "authentication" "optional in client"
This option provides a list of servers to which, provided they announce
authentication support, Exim will attempt to authenticate as a client when it
-connects. If authentication fails, Exim will try to transfer the message
-unauthenticated. See also &%hosts_require_auth%&, and chapter
-&<<CHAPSMTPAUTH>>& for details of authentication.
+connects. If authentication fails
+.new
+and &%hosts_require_auth%& permits,
+.wen
+Exim will try to transfer the message unauthenticated.
+See also chapter &<<CHAPSMTPAUTH>>& for details of authentication.
.option hosts_try_chunking smtp "host list&!!" *
.cindex CHUNKING "enabling, in client"
&$address_data$&, &$domain_data$&, &$local_part_data$&,
&$host$&, &$host_address$& and &$host_port$&.
+.new
+If the connection is DANE-enabled then this option is ignored;
+only messages having the domain used for the DANE TLSA lookup are
+sent on the connection.
+.wen
+
.option port smtp string&!! "see below"
.cindex "port" "sending TCP/IP"
.cindex "TCP/IP" "setting outgoing port"
.option tls_sni smtp string&!! unset
.cindex "TLS" "Server Name Indication"
+.cindex "TLS" SNI
+.cindex SNI "setting in client"
.vindex "&$tls_sni$&"
-If this option is set then it sets the $tls_out_sni variable and causes any
+If this option is set
+.new
+and the connection is not DANE-validated
+.wen
+then it sets the $tls_out_sni variable and causes any
TLS session to pass this value as the Server Name Indication extension to
the remote side, which can be used by the remote side to select an appropriate
certificate and private key for the session.
This should be documented with the feature. If the documentation does not
explicitly state that the feature is infeasible in the other TLS
implementation, then patches are welcome.
+.new
+.next
+The output from "exim -bV" will show which (if any) support was included
+in the build.
+Also, the macro "_HAVE_OPENSSL" or "_HAVE_GNUTLS" will be defined.
+.wen
.endlist
.endd
+.new
+.section "Caching of static server configuration items" "SECTserverTLScache"
+.cindex certificate caching
+.cindex privatekey caching
+.cindex crl caching
+.cindex ocsp caching
+.cindex ciphers caching
+.cindex "CA bundle" caching
+.cindex "certificate authorities" caching
+.cindex tls_certificate caching
+.cindex tls_privatekey caching
+.cindex tls_crl caching
+.cindex tls_ocsp_file caching
+.cindex tls_require_ciphers caching
+.cindex tls_verify_certificate caching
+.cindex caching certificate
+.cindex caching privatekey
+.cindex caching crl
+.cindex caching ocsp
+.cindex caching ciphers
+.cindex caching "certificate authorities
+If any of the main configuration options &%tls_certificate%&, &%tls_privatekey%&,
+&%tls_crl%& and &%tls_ocsp_file%& have values with no
+expandable elements,
+then the associated information is loaded at daemon startup.
+It is made available
+to child processes forked for handling received SMTP connections.
+
+This caching is currently only supported under Linux and FreeBSD.
+
+If caching is not possible, for example if an item has to be dependent
+on the peer host so contains a &$sender_host_name$& expansion, the load
+of the associated information is done at the startup of the TLS connection.
+
+The cache is invalidated and reloaded after any changes to the directories
+containing files specified by these options.
+
+The information specified by the main option &%tls_verify_certificates%&
+is similarly cached so long as it specifies files explicitly
+or (under GnuTLS) is the string &"system,cache"&.
+The latter case is not automatically invalidated;
+it is the operator's responsibility to arrange for a daemon restart
+any time the system certificate authority bundle is updated.
+A HUP signal is sufficient for this.
+The value &"system"& results in no caching under GnuTLS.
+
+The macro _HAVE_TLS_CA_CACHE will be defined if the suffix for "system"
+is acceptable in configurations for the Exim executavble.
+
+Caching of the system Certificate Authorities bundle can
+save siginificant time and processing on every TLS connection
+accepted by Exim.
+.wen
+
+
.section "Configuring an Exim client to use TLS" "SECTclientTLS"
The &%tls_certificate%& and &%tls_privatekey%& options of the &(smtp)&
transport provide the client with a certificate, which is passed to the server
-if it requests it. If the server is Exim, it will request a certificate only if
+if it requests it.
+This is an optional thing for TLS connections, although either end
+may insist on it.
+If the server is Exim, it will request a certificate only if
&%tls_verify_hosts%& or &%tls_try_verify_hosts%& matches the client.
&*Note*&: Do not use a certificate which has the OCSP-must-staple extension,
or need not succeed respectively.
The &%tls_verify_cert_hostnames%& option lists hosts for which additional
-checks are made: that the host name (the one in the DNS A record)
-is valid for the certificate.
+name checks are made on the server certificate.
+.new
+The match against this list is, as per other Exim usage, the
+IP for the host. That is most closely associated with the
+name on the DNS A (or AAAA) record for the host.
+However, the name that needs to be in the certificate
+is the one at the head of any CNAME chain leading to the A record.
+.wen
The option defaults to always checking.
The &(smtp)& transport has two OCSP-related options:
+.new
+.section "Caching of static client configuration items" "SECTclientTLScache"
+.cindex certificate caching
+.cindex privatekey caching
+.cindex crl caching
+.cindex ciphers caching
+.cindex "CA bundle" caching
+.cindex "certificate authorities" caching
+.cindex tls_certificate caching
+.cindex tls_privatekey caching
+.cindex tls_crl caching
+.cindex tls_require_ciphers caching
+.cindex tls_verify_certificate caching
+.cindex caching certificate
+.cindex caching privatekey
+.cindex caching crl
+.cindex caching ciphers
+.cindex caching "certificate authorities
+If any of the transport configuration options &%tls_certificate%&, &%tls_privatekey%&
+and &%tls_crl%& have values with no
+expandable elements,
+then the associated information is loaded per smtp transport
+at daemon startup, at the start of a queue run, or on a
+command-line specified message delivery.
+It is made available
+to child processes forked for handling making SMTP connections.
+
+This caching is currently only supported under Linux.
+
+If caching is not possible, the load
+of the associated information is done at the startup of the TLS connection.
+
+The cache is invalidated in the daemon
+and reloaded after any changes to the directories
+containing files specified by these options.
+
+The information specified by the main option &%tls_verify_certificates%&
+is similarly cached so long as it specifies files explicitly
+or (under GnuTLS) is the string &"system,cache"&.
+The latter case is not automatically invaludated;
+it is the operator's responsibility to arrange for a daemon restart
+any time the system certificate authority bundle is updated.
+A HUP signal is sufficient for this.
+The value &"system"& results in no caching under GnuTLS.
+
+The macro _HAVE_TLS_CA_CACHE will be defined if the suffix for "system"
+is acceptable in configurations for the Exim executavble.
+
+Caching of the system Certificate Authorities bundle can
+save siginificant time and processing on every TLS connection
+initiated by Exim.
+.wen
+
+
+
+
.section "Use of TLS Server Name Indication" "SECTtlssni"
.cindex "TLS" "Server Name Indication"
+.cindex "TLS" SNI
+.cindex SNI
.vindex "&$tls_in_sni$&"
.oindex "&%tls_in_sni%&"
With TLS1.0 or above, there is an extension mechanism by which extra
only point of caution. The &$tls_out_sni$& variable will be set to this string
for the lifetime of the client connection (including during authentication).
+.new
+If DANE validated the connection attempt then the value of the &%tls_sni%& option
+is forced to the domain part of the recipient address.
+.wen
+
Except during SMTP client sessions, if &$tls_in_sni$& is set then it is a string
received from a client.
It can be logged with the &%log_selector%& item &`+tls_sni`&.
It also allows the server to declare (implicitly) that connections to it should use TLS. An MITM could simply
fail to pass on a server's STARTTLS.
-DANE scales better than having to maintain (and side-channel communicate) copies of server certificates
+DANE scales better than having to maintain (and communicate via side-channel) copies of server certificates
for every possible target server. It also scales (slightly) better than having to maintain on an SMTP
client a copy of the standard CAs bundle. It also means not having to pay a CA for certificates.
tls_verify_certificates
tls_crl
tls_verify_cert_hostnames
+ tls_sni
.endd
If DANE is not usable, whether requested or not, and CA-anchored
.cindex "header lines" "verifying header names only ASCII"
.cindex "verifying" "header names only ASCII"
This condition is relevant only in an ACL that is run after a message has been
-received, that is, in an ACL specified by &%acl_smtp_data%& or
-&%acl_not_smtp%&. It checks all header names (not the content) to make sure
+received.
+This usually means an ACL specified by &%acl_smtp_data%& or &%acl_not_smtp%&.
+It checks all header names (not the content) to make sure
there are no non-ASCII characters, also excluding control characters. The
allowable characters are decimal ASCII values 33 through 126.
(eg. is generated from the received message)
they must be protected from the options parsing by doubling:
.code
-verify = sender=${sg{${address:$h_sender:}}{/}{//}}
+verify = sender=${listquote{/}{${address:$h_sender:}}}
.endd
.endlist
The &%per_rcpt%& option causes Exim to limit the rate at which recipients are
accepted. It can be used in the &%acl_smtp_rcpt%&, &%acl_smtp_predata%&,
-&%acl_smtp_mime%&, &%acl_smtp_data%&, or &%acl_smtp_rcpt%& ACLs. In
+&%acl_smtp_mime%&, or &%acl_smtp_data%& ACLs. In
&%acl_smtp_rcpt%& the rate is updated one recipient at a time; in the other
ACLs the rate is updated with the total (accepted) recipient count in one go. Note that
in either case the rate limiting engine will see a message with many
.section "Per-address filtering" "SECTperaddfil"
-.vindex "&$domain$&"
-.vindex "&$local_part$&"
+.vindex "&$domain_data$&"
+.vindex "&$local_part_data$&"
In contrast to the system filter, which is run just once per message for each
delivery attempt, it is also possible to set up a system-wide filtering
operation that runs once for each recipient address. In this case, variables
-such as &$local_part$& and &$domain$& can be used, and indeed, the choice of
-filter file could be made dependent on them. This is an example of a router
-which implements such a filter:
+such as &$local_part_data$& and &$domain_data$& can be used,
+and indeed, the choice of filter file could be made dependent on them.
+This is an example of a router which implements such a filter:
.code
central_filter:
check_local_user
.code
my_mailboxes:
driver = appendfile
- file = /var/mail/$domain/$local_part_data
+ file = /var/mail/$domain_data/$local_part_data
user = mail
.endd
This uses a directory of mailboxes for each domain. The &%user%& setting is
cases by testing the variable &$local_part_suffix$&. For example:
.code
if $local_part_suffix contains -special then
-save /home/$local_part/Mail/special
+save /home/$local_part_data/Mail/special
endif
.endd
If the filter file does not exist, or does not deal with such addresses, they
If SMTP AUTH was used for the delivery there is an additional item A=
followed by the name of the authenticator that was used.
If an authenticated identification was set up by the authenticator's &%client_set_id%&
-option, this is logged too, separated by a colon from the authenticator name.
+option, this is logged too, as a second colon-separated list item.
+Optionally (see the &%smtp_mailauth%& &%log_selector%&) there may be a third list item.
If a shadow transport was run after a successful local delivery, the log line
for the successful delivery has an item added on the end, of the form
client's ident port times out.
.next
.cindex "log" "incoming interface"
+.cindex "log" "outgoing interface"
.cindex "log" "local interface"
.cindex "log" "local address and port"
.cindex "TCP/IP" "logging local address and port"
to the &"<="& line as an IP address in square brackets, tagged by I= and
followed by a colon and the port number. The local interface and port are also
added to other SMTP log lines, for example, &"SMTP connection from"&, to
-rejection lines, and (despite the name) to outgoing &"=>"& and &"->"& lines.
+rejection lines, and (despite the name) to outgoing
+.new
+&"=>"&, &"->"&, &"=="& and &"**"& lines.
+.wen
The latter can be disabled by turning off the &%outgoing_interface%& option.
.next
.cindex log "incoming proxy address"
.next
.cindex "log" "TLS SNI"
.cindex "TLS" "logging SNI"
+.cindex SNI logging
&%tls_sni%&: When a message is received over an encrypted connection, and
the remote host provided the Server Name Indication extension, the SNI is
added to the log line, preceded by SNI=.
"check address acceptance from given IP"
.irow &<<SECTdbmbuild>>& &'exim_dbmbuild'& "build a DBM file"
.irow &<<SECTfinindret>>& &'exinext'& "extract retry information"
-.irow &<<SECThindatmai>>& &'exim_dumpdb'& "dump a hints database"
-.irow &<<SECThindatmai>>& &'exim_tidydb'& "clean up a hints database"
-.irow &<<SECThindatmai>>& &'exim_fixdb'& "patch a hints database"
+.irow &<<SECTdumpdb>>& &'exim_dumpdb'& "dump a hints database"
+.irow &<<SECTtidydb>>& &'exim_tidydb'& "clean up a hints database"
+.irow &<<SECTfixdb>>& &'exim_fixdb'& "patch a hints database"
.irow &<<SECTmailboxmaint>>& &'exim_lock'& "lock a mailbox file"
.endtable
-.section "exim_dumpdb" "SECID261"
+.section "exim_dumpdb" "SECTdumpdb"
.cindex "&'exim_dumpdb'&"
The entire contents of a database are written to the standard output by the
&'exim_dumpdb'& program, which has no options or arguments other than the
-.section "exim_tidydb" "SECID262"
+.section "exim_tidydb" "SECTtidydb"
.cindex "&'exim_tidydb'&"
The &'exim_tidydb'& utility program is used to tidy up the contents of a hints
database. If run with no options, it removes all records that are more than 30
-.section "exim_fixdb" "SECID263"
+.section "exim_fixdb" "SECTfixdb"
.cindex "&'exim_fixdb'&"
The &'exim_fixdb'& program is a utility for interactively modifying databases.
Its main use is for testing Exim, but it might also be occasionally useful for
Signing is enabled by setting private options on the SMTP transport.
These options take (expandable) strings as arguments.
-.option dkim_domain smtp string list&!! unset
+.option dkim_domain smtp "string list&!!" unset
The domain(s) you want to sign with.
After expansion, this can be a list.
Each element in turn,
If it is empty after expansion, DKIM signing is not done,
and no error will result even if &%dkim_strict%& is set.
-.option dkim_selector smtp string list&!! unset
+.option dkim_selector smtp "string list&!!" unset
This sets the key selector string.
After expansion, which can use &$dkim_domain$&, this can be a list.
Each element in turn is put in the expansion
.code
#macro
SRS_SECRET = <pick something unique for your site for this. Use on all MXs.>
-
+
#routers
outbound:
transport = ${if eq {$local_part@$domain} \
{$original_local_part@$original_domain} \
{remote_smtp} {remote_forwarded_smtp}}
-
+
inbound_srs:
driver = redirect
senders = :
# detect inbound bounces which are SRS'd, and decode them
condition = ${if inbound_srs {$local_part} {SRS_SECRET}}
data = $srs_recipient
-
+
inbound_srs_failure:
driver = redirect
senders = :
#... further routers here
-
+
# transport; should look like the non-forward outbound
# one, plus the max_rcpt and return_path options
remote_forwarded_smtp:
&'reject '& The DMARC check failed and the library recommends rejecting the email.
&'quarantine '& The DMARC check failed and the library recommends keeping it for further inspection.
&'none '& The DMARC check passed and the library recommends no specific action, neutral.
-&'norecord '& No policy section in the DMARC record for this sender domain.
+&'norecord '& No policy section in the DMARC record for this RFC5322.From field
&'nofrom '& Unable to determine the domain of the sender.
&'temperror '& Library error or dns error.
&'off '& The DMARC check was disabled for this email.
The Proxy Protocol header is the first data received on a TCP connection
and is inserted before any TLS-on-connect handshake from the client; Exim
negotiates TLS between Exim-as-server and the remote client, not between
-Exim and the proxy server.
+Exim and the proxy server. The Proxy Protocol header must be received
+within &%proxy_protocol_timeout%&, which defaults to 3s.
The following expansion variables are usable
(&"internal"& and &"external"& here refer to the interfaces
git://git.exim.org / exim.git / blobdiff