-/* $Cambridge: exim/src/src/exim.c,v 1.36 2006/02/23 10:25:01 ph10 Exp $ */
+/* $Cambridge: exim/src/src/exim.c,v 1.71 2010/06/07 00:12:42 pdp Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2006 */
+/* Copyright (c) University of Cambridge 1995 - 2009 */
/* See the file NOTICE for conditions of use and distribution. */
-/*************************************************
-* Decode bit settings for log/debug *
-*************************************************/
-
-/* This function decodes a string containing bit settings in the form of +name
-and/or -name sequences, and sets/unsets bits in a bit string accordingly. It
-also recognizes a numeric setting of the form =<number>, but this is not
-intended for user use. It's an easy way for Exim to pass the debug settings
-when it is re-exec'ed.
-
-The log options are held in two unsigned ints (because there became too many
-for one). The top bit in the table means "put in 2nd selector". This does not
-yet apply to debug options, so the "=" facility sets only the first selector.
-
-The "all" selector, which must be equal to 0xffffffff, is recognized specially.
-It sets all the bits in both selectors. However, there is a facility for then
-unsetting certain bits, because we want to turn off "memory" in the debug case.
-
-A bad value for a debug setting is treated as an unknown option - error message
-to stderr and die. For log settings, which come from the configuration file,
-we write to the log on the way out...
-
-Arguments:
- selector1 address of the first bit string
- selector2 address of the second bit string, or NULL
- notall1 bits to exclude from "all" for selector1
- notall2 bits to exclude from "all" for selector2
- string the configured string
- options the table of option names
- count size of table
- which "log" or "debug"
-
-Returns: nothing on success - bomb out on failure
-*/
-
-static void
-decode_bits(unsigned int *selector1, unsigned int *selector2, int notall1,
- int notall2, uschar *string, bit_table *options, int count, uschar *which)
-{
-uschar *errmsg;
-if (string == NULL) return;
-
-if (*string == '=')
- {
- char *end; /* Not uschar */
- *selector1 = strtoul(CS string+1, &end, 0);
- if (*end == 0) return;
- errmsg = string_sprintf("malformed numeric %s_selector setting: %s", which,
- string);
- goto ERROR_RETURN;
- }
-
-/* Handle symbolic setting */
-
-else for(;;)
- {
- BOOL adding;
- uschar *s;
- int len;
- bit_table *start, *end;
-
- while (isspace(*string)) string++;
- if (*string == 0) return;
-
- if (*string != '+' && *string != '-')
- {
- errmsg = string_sprintf("malformed %s_selector setting: "
- "+ or - expected but found \"%s\"", which, string);
- goto ERROR_RETURN;
- }
-
- adding = *string++ == '+';
- s = string;
- while (isalnum(*string) || *string == '_') string++;
- len = string - s;
-
- start = options;
- end = options + count;
-
- while (start < end)
- {
- bit_table *middle = start + (end - start)/2;
- int c = Ustrncmp(s, middle->name, len);
- if (c == 0)
- {
- if (middle->name[len] != 0) c = -1; else
- {
- unsigned int bit = middle->bit;
- unsigned int *selector;
-
- /* The value with all bits set means "force all bits in both selectors"
- in the case where two are being handled. However, the top bit in the
- second selector is never set. When setting, some bits can be excluded.
- */
-
- if (bit == 0xffffffff)
- {
- if (adding)
- {
- *selector1 = 0xffffffff ^ notall1;
- if (selector2 != NULL) *selector2 = 0x7fffffff ^ notall2;
- }
- else
- {
- *selector1 = 0;
- if (selector2 != NULL) *selector2 = 0;
- }
- }
-
- /* Otherwise, the 0x80000000 bit means "this value, without the top
- bit, belongs in the second selector". */
-
- else
- {
- if ((bit & 0x80000000) != 0)
- {
- selector = selector2;
- bit &= 0x7fffffff;
- }
- else selector = selector1;
- if (adding) *selector |= bit; else *selector &= ~bit;
- }
- break; /* Out of loop to match selector name */
- }
- }
- if (c < 0) end = middle; else start = middle + 1;
- } /* Loop to match selector name */
-
- if (start >= end)
- {
- errmsg = string_sprintf("unknown %s_selector setting: %c%.*s", which,
- adding? '+' : '-', len, s);
- goto ERROR_RETURN;
- }
- } /* Loop for selector names */
-
-/* Handle disasters */
-
-ERROR_RETURN:
-if (Ustrcmp(which, "debug") == 0)
- {
- fprintf(stderr, "exim: %s\n", errmsg);
- exit(EXIT_FAILURE);
- }
-else log_write(0, LOG_CONFIG|LOG_PANIC_DIE, "%s", errmsg);
-}
-
-
-
/*************************************************
* Show supported features *
*************************************************/
-/* This function is called for -bV and for -d to output the optional features
-of the current Exim binary.
+/* This function is called for -bV/--version and for -d to output the optional
+features of the current Exim binary.
Arguments: a FILE for printing
Returns: nothing
#if HAVE_IPV6
fprintf(f, " IPv6");
#endif
-#ifdef HAVE_LOGIN_CAP
- fprintf(f, " use_classresources");
+#ifdef HAVE_SETCLASSRESOURCES
+ fprintf(f, " use_setclassresources");
#endif
#ifdef SUPPORT_PAM
fprintf(f, " PAM");
#ifdef WITH_CONTENT_SCAN
fprintf(f, " Content_Scanning");
#endif
+#ifndef DISABLE_DKIM
+ fprintf(f, " DKIM");
+#endif
#ifdef WITH_OLD_DEMIME
fprintf(f, " Old_Demime");
#endif
#ifdef EXPERIMENTAL_BRIGHTMAIL
fprintf(f, " Experimental_Brightmail");
#endif
-#ifdef EXPERIMENTAL_DOMAINKEYS
- fprintf(f, " Experimental_DomainKeys");
+#ifdef EXPERIMENTAL_DCC
+ fprintf(f, " Experimental_DCC");
#endif
fprintf(f, "\n");
#ifdef AUTH_CYRUS_SASL
fprintf(f, " cyrus_sasl");
#endif
+#ifdef AUTH_DOVECOT
+ fprintf(f, " dovecot");
+#endif
#ifdef AUTH_PLAINTEXT
fprintf(f, " plaintext");
#endif
fprintf(f, "%d\n", (unsigned int)fixed_never_users[i]);
}
-fprintf(f, "Size of off_t: %d\n", sizeof(off_t));
+fprintf(f, "Size of off_t: " SIZE_T_FMT "\n", sizeof(off_t));
+
+/* This runtime check is to help diagnose library linkage mismatches which
+result in segfaults and the like; as such, it's left until the end,
+just in case. There will still be a "Configuration file is" line still to
+come. */
+#ifdef SUPPORT_TLS
+tls_version_report(f);
+#endif
}
int ptr = 0;
uschar *yield = NULL;
-if (fn_readline == NULL) printf("> ");
+if (fn_readline == NULL) { printf("> "); fflush(stdout); }
for (i = 0;; i++)
{
+/*************************************************
+* Output usage information for the program *
+*************************************************/
+
+/* This function is called when there are no recipients
+ or a specific --help argument was added.
+
+Arguments:
+ progname information on what name we were called by
+
+Returns: DOES NOT RETURN
+*/
+
+static void
+exim_usage(uschar *progname)
+{
+
+/* Handle specific program invocation varients */
+if (Ustrcmp(progname, US"-mailq") == 0)
+ {
+ fprintf(stderr,
+ "mailq - list the contents of the mail queue\n\n"
+ "For a list of options, see the Exim documentation.\n");
+ exit(EXIT_FAILURE);
+ }
+
+/* Generic usage - we output this whatever happens */
+fprintf(stderr,
+ "Exim is a Mail Transfer Agent. It is normally called by Mail User Agents,\n"
+ "not directly from a shell command line. Options and/or arguments control\n"
+ "what it does when called. For a list of options, see the Exim documentation.\n");
+
+exit(EXIT_FAILURE);
+}
+
+
+
/*************************************************
* Entry point and high-level code *
*************************************************/
BOOL one_msg_action = FALSE;
BOOL queue_only_set = FALSE;
BOOL receiving_message = TRUE;
+BOOL sender_ident_set = FALSE;
+BOOL session_local_queue_only;
BOOL unprivileged;
BOOL removed_privilege = FALSE;
+BOOL usage_wanted = FALSE;
BOOL verify_address_mode = FALSE;
BOOL verify_as_sender = FALSE;
BOOL version_printed = FALSE;
uschar *called_as = US"";
uschar *start_queue_run_id = NULL;
uschar *stop_queue_run_id = NULL;
+uschar *expansion_test_message = NULL;
uschar *ftest_domain = NULL;
uschar *ftest_localpart = NULL;
uschar *ftest_prefix = NULL;
uschar *ftest_suffix = NULL;
+uschar *malware_test_file = NULL;
uschar *real_sender_address;
uschar *originator_home = US"/";
void *reset_point;
#ifdef EXIM_USERNAME
if (route_finduser(US EXIM_USERNAME, &pw, &exim_uid))
{
+ if (exim_uid == 0)
+ {
+ fprintf(stderr, "exim: refusing to run with uid 0 for \"%s\"\n",
+ EXIM_USERNAME);
+ exit(EXIT_FAILURE);
+ }
exim_gid = pw->pw_gid;
}
else
regex_ismsgid =
regex_must_compile(US"^(?:[^\\W_]{6}-){2}[^\\W_]{2}$", FALSE, TRUE);
+/* Precompile the regular expression that is used for matching an SMTP error
+code, possibly extended, at the start of an error message. Note that the
+terminating whitespace character is included. */
+
+regex_smtp_code =
+ regex_must_compile(US"^\\d\\d\\d\\s(?:\\d\\.\\d\\d?\\d?\\.\\d\\d?\\d?\\s)?",
+ FALSE, TRUE);
+
/* If the program is called as "mailq" treat it as equivalent to "exim -bp";
this seems to be a generally accepted convention, since one finds symbolic
links called "mailq" in standard OS configurations. */
unprivileged = (real_uid != root_uid && original_euid != root_uid);
-/* If the first argument is --help, pretend there are no arguments. This will
-cause a brief message to be given. */
-
-if (argc > 1 && Ustrcmp(argv[1], "--help") == 0) argc = 1;
-
/* Scan the program's arguments. Some can be dealt with right away; others are
simply recorded for checking and handling afterwards. Do a high-level switch
on the second character (the one after '-'), to save some effort. */
argrest++;
}
+ /* deal with --option_aliases */
+ else if (switchchar == '-')
+ {
+ if (Ustrcmp(argrest, "help") == 0)
+ {
+ usage_wanted = TRUE;
+ break;
+ }
+ else if (Ustrcmp(argrest, "version") == 0)
+ {
+ switchchar = 'b';
+ argrest = US"V";
+ }
+ }
+
/* High-level switch on active initial letter */
switch(switchchar)
else if (*argrest != 0) { badarg = TRUE; break; }
}
- /* -be: Run in expansion test mode */
+ /* -be: Run in expansion test mode
+ -bem: Ditto, but read a message from a file first
+ */
else if (*argrest == 'e')
+ {
expansion_test = checking = TRUE;
+ if (argrest[1] == 'm')
+ {
+ if (++i >= argc) { badarg = TRUE; break; }
+ expansion_test_message = argv[i];
+ argrest++;
+ }
+ if (argrest[1] != 0) { badarg = TRUE; break; }
+ }
/* -bF: Run system filter test */
else if (Ustrcmp(argrest, "m") == 0) receiving_message = TRUE;
+ /* -bmalware: test the filename given for malware */
+
+ else if (Ustrcmp(argrest, "malware") == 0)
+ {
+ if (++i >= argc) { badarg = TRUE; break; }
+ malware_test_file = argv[i];
+ }
+
/* -bnq: For locally originating messages, do not qualify unqualified
addresses. In the envelope, this causes errors; in header lines they
just get left. */
}
if (*argrest != 0)
decode_bits(&selector, NULL, D_memory, 0, argrest, debug_options,
- debug_options_count, US"debug");
+ debug_options_count, US"debug", 0);
debug_selector = selector;
}
break;
if (Ustrcmp(argrest, "C") == 0)
{
+ union sockaddr_46 interface_sock;
+ EXIM_SOCKLEN_T size = sizeof(interface_sock);
+
if (argc != i + 6)
{
fprintf(stderr, "exim: too many or too few arguments after -MC\n");
return EXIT_FAILURE;
}
+ /* Set up $sending_ip_address and $sending_port */
+
+ if (getsockname(fileno(stdin), (struct sockaddr *)(&interface_sock),
+ &size) == 0)
+ sending_ip_address = host_ntoa(-1, &interface_sock, NULL,
+ &sending_port);
+ else
+ {
+ fprintf(stderr, "exim: getsockname() failed after -MC option: %s\n",
+ strerror(errno));
+ return EXIT_FAILURE;
+ }
+
if (running_in_test_harness) millisleep(500);
break;
}
-Mmad mark all recipients delivered
-Mmd mark recipients(s) delivered
-Mes edit sender
+ -Mset load a message for use with -be
-Mvb show body
+ -Mvc show copy (of whole message, in RFC 2822 format)
-Mvh show header
-Mvl show log
*/
one_msg_action = TRUE;
}
else if (Ustrcmp(argrest, "rm") == 0) msg_action = MSG_REMOVE;
+ else if (Ustrcmp(argrest, "set") == 0)
+ {
+ msg_action = MSG_LOAD;
+ one_msg_action = TRUE;
+ }
else if (Ustrcmp(argrest, "t") == 0) msg_action = MSG_THAW;
else if (Ustrcmp(argrest, "vb") == 0)
{
msg_action = MSG_SHOW_BODY;
one_msg_action = TRUE;
}
+ else if (Ustrcmp(argrest, "vc") == 0)
+ {
+ msg_action = MSG_SHOW_COPY;
+ one_msg_action = TRUE;
+ }
else if (Ustrcmp(argrest, "vh") == 0)
{
msg_action = MSG_SHOW_HEADER;
/* -oMt: Set sender ident */
- else if (Ustrcmp(argrest, "Mt") == 0) sender_ident = argv[++i];
+ else if (Ustrcmp(argrest, "Mt") == 0)
+ {
+ sender_ident_set = TRUE;
+ sender_ident = argv[++i];
+ }
/* Else a bad argument */
case 'q':
receiving_message = FALSE;
+ if (queue_interval >= 0)
+ {
+ fprintf(stderr, "exim: -q specified more than once\n");
+ exit(EXIT_FAILURE);
+ }
/* -qq...: Do queue runs in a 2-stage manner */
}
}
else deliver_selectstring = argrest;
- if (queue_interval < 0) queue_interval = 0;
break;
}
}
else deliver_selectstring_sender = argrest;
- if (queue_interval < 0) queue_interval = 0;
break;
/* -Tqt is an option that is exclusively for use by the testing suite.
}
-/* Arguments have been processed. Check for incompatibilities. */
+/* If -R or -S have been specified without -q, assume a single queue run. */
+
+if ((deliver_selectstring != NULL || deliver_selectstring_sender != NULL) &&
+ queue_interval < 0) queue_interval = 0;
+
END_ARG:
+/* If usage_wanted is set we call the usage function - which never returns */
+if (usage_wanted) exim_usage(called_as);
+
+/* Arguments have been processed. Check for incompatibilities. */
if ((
(smtp_input || extract_recipients || recipients_arg < argc) &&
(daemon_listen || queue_interval >= 0 || bi_option ||
) ||
(
msg_action_arg > 0 &&
- (daemon_listen || queue_interval >= 0 || list_options || checking ||
- bi_option || test_retry_arg >= 0 || test_rewrite_arg >= 0)
+ (daemon_listen || queue_interval >= 0 || list_options ||
+ (checking && msg_action != MSG_LOAD) ||
+ bi_option || test_retry_arg >= 0 || test_rewrite_arg >= 0)
) ||
(
(daemon_listen || queue_interval >= 0) &&
(sender_address != NULL || list_options || list_queue || checking ||
- bi_option)
+ bi_option)
) ||
(
daemon_listen && queue_interval == 0
) ||
(
deliver_selectstring != NULL && queue_interval < 0
+ ) ||
+ (
+ msg_action == MSG_LOAD &&
+ (!expansion_test || expansion_test_message != NULL)
)
)
{
/* Handle the decoding of logging options. */
-decode_bits(&log_write_selector, &log_extra_selector, 0, 0, log_selector_string,
- log_options, log_options_count, US"log");
+decode_bits(&log_write_selector, &log_extra_selector, 0, 0,
+ log_selector_string, log_options, log_options_count, US"log", 0);
DEBUG(D_any)
{
else
{
int i, j;
-
for (i = 0; i < group_count; i++)
{
if (group_list[i] == exim_gid) admin_user = TRUE;
user may request that a message be returned to its sender forthwith. Only an
admin user may specify a debug level greater than D_v (because it might show
passwords, etc. in lookup queries). Only an admin user may request a queue
-count. */
+count. Only an admin user can use the test interface to scan for email
+(because Exim will be in the spool dir and able to look at mails). */
if (!admin_user)
{
BOOL debugset = (debug_selector & ~D_v) != 0;
- if (deliver_give_up || daemon_listen ||
+ if (deliver_give_up || daemon_listen || malware_test_file ||
(count_queue && queue_list_requires_admin) ||
(list_queue && queue_list_requires_admin) ||
(queue_interval >= 0 && prod_requires_admin) ||
(is_inetd && smtp_load_reserve >= 0)
))
{
- load_average = os_getloadavg();
+ load_average = OS_GETLOADAVG();
}
#endif
except when starting the daemon or doing some kind of delivery or address
testing (-bt). These are the only cases when root need to be retained. We run
as exim for -bv and -bh. However, if deliver_drop_privilege is set, root is
-retained only for starting the daemon. */
+retained only for starting the daemon. We always do the initgroups() in this
+situation (controlled by the TRUE below), in order to be as close as possible
+to the state Exim usually runs in. */
if (!unprivileged && /* originally had root AND */
!removed_privilege && /* still got root AND */
)
))
{
- exim_setugid(exim_uid, exim_gid, FALSE, US"privilege not needed");
+ exim_setugid(exim_uid, exim_gid, TRUE, US"privilege not needed");
}
/* When we are retaining a privileged uid, we still change to the exim gid. */
else setgid(exim_gid);
+/* Handle a request to scan a file for malware */
+if (malware_test_file)
+ {
+#ifdef WITH_CONTENT_SCAN
+ int result;
+ set_process_info("scanning file for malware");
+ result = malware_in_file(malware_test_file);
+ if (result == FAIL)
+ {
+ printf("No malware found.\n");
+ exit(EXIT_SUCCESS);
+ }
+ if (result != OK)
+ {
+ printf("Malware lookup returned non-okay/fail: %d\n", result);
+ exit(EXIT_FAILURE);
+ }
+ if (malware_name)
+ printf("Malware found: %s\n", malware_name);
+ else
+ printf("Malware scan detected malware of unknown name.\n");
+#else
+ printf("Malware scanning not enabled at compile time.\n");
+#endif
+ exit(EXIT_FAILURE);
+ }
+
/* Handle a request to list the delivery queue */
if (list_queue)
exit(EXIT_SUCCESS);
}
-/* Handle actions on specific messages, except for the force delivery action,
-which is done below. Some actions take a whole list of message ids, which
-are known to continue up to the end of the arguments. Others take a single
-message id and then operate on the recipients list. */
+/* Handle actions on specific messages, except for the force delivery and
+message load actions, which are done below. Some actions take a whole list of
+message ids, which are known to continue up to the end of the arguments. Others
+take a single message id and then operate on the recipients list. */
-if (msg_action_arg > 0 && msg_action != MSG_DELIVER)
+if (msg_action_arg > 0 && msg_action != MSG_DELIVER && msg_action != MSG_LOAD)
{
int yield = EXIT_SUCCESS;
set_process_info("acting on specified messages");
return EXIT_FAILURE;
}
- /* For the rcpt_4xx errors, a value of 255 means "any", and a code > 100 as
- an error is for matching codes to the decade. Turn them into a real error
- code, off the decade. */
+ /* For the {MAIL,RCPT,DATA}_4xx errors, a value of 255 means "any", and a
+ code > 100 as an error is for matching codes to the decade. Turn them into
+ a real error code, off the decade. */
- if (basic_errno == ERRNO_RCPT4XX)
+ if (basic_errno == ERRNO_MAIL4XX ||
+ basic_errno == ERRNO_RCPT4XX ||
+ basic_errno == ERRNO_DATA4XX)
{
int code = (more_errno >> 8) & 255;
if (code == 255)
if (i < argc - 1 &&
(Ustrcmp(argv[i], "router") == 0 ||
Ustrcmp(argv[i], "transport") == 0 ||
- Ustrcmp(argv[i], "authenticator") == 0))
+ Ustrcmp(argv[i], "authenticator") == 0 ||
+ Ustrcmp(argv[i], "macro") == 0))
{
readconf_print(argv[i+1], argv[i]);
i++;
/* Handle a request to deliver one or more messages that are already on the
-queue. Values of msg_action other than MSG_DELIVER are dealt with above. This
-is typically used for a small number when prodding by hand (when the option
-forced_delivery will be set) or when re-execing to regain root privilege.
-Each message delivery must happen in a separate process, so we fork a process
-for each one, and run them sequentially so that debugging output doesn't get
-intertwined, and to avoid spawning too many processes if a long list is given.
-However, don't fork for the last one; this saves a process in the common case
-when Exim is called to deliver just one message. */
-
-if (msg_action_arg > 0)
+queue. Values of msg_action other than MSG_DELIVER and MSG_LOAD are dealt with
+above. MSG_LOAD is handled with -be (which is the only time it applies) below.
+
+Delivery of specific messages is typically used for a small number when
+prodding by hand (when the option forced_delivery will be set) or when
+re-execing to regain root privilege. Each message delivery must happen in a
+separate process, so we fork a process for each one, and run them sequentially
+so that debugging output doesn't get intertwined, and to avoid spawning too
+many processes if a long list is given. However, don't fork for the last one;
+this saves a process in the common case when Exim is called to deliver just one
+message. */
+
+if (msg_action_arg > 0 && msg_action != MSG_LOAD)
{
if (prod_requires_admin && !admin_user)
{
sender_local = TRUE;
/* A trusted caller can supply authenticated_sender and authenticated_id
- via -oMas and -oMai and if so, they will already be set. */
+ via -oMas and -oMai and if so, they will already be set. Otherwise, force
+ defaults except when host checking. */
- if (authenticated_sender == NULL)
+ if (authenticated_sender == NULL && !host_checking)
authenticated_sender = string_sprintf("%s@%s", originator_login,
qualify_domain_sender);
- if (authenticated_id == NULL) authenticated_id = originator_login;
+ if (authenticated_id == NULL && !host_checking)
+ authenticated_id = originator_login;
}
/* Trusted callers are always permitted to specify the sender address.
exim_exit(exit_value);
}
-/* Handle expansion checking */
+/* Handle expansion checking. Either expand items on the command line, or read
+from stdin if there aren't any. If -Mset was specified, load the message so
+that its variables can be used, but restrict this facility to admin users.
+Otherwise, if -bem was used, read a message from stdin. */
if (expansion_test)
{
+ if (msg_action_arg > 0 && msg_action == MSG_LOAD)
+ {
+ uschar spoolname[256]; /* Not big_buffer; used in spool_read_header() */
+ if (!admin_user)
+ {
+ fprintf(stderr, "exim: permission denied\n");
+ exit(EXIT_FAILURE);
+ }
+ message_id = argv[msg_action_arg];
+ (void)string_format(spoolname, sizeof(spoolname), "%s-H", message_id);
+ if (!spool_open_datafile(message_id))
+ printf ("Failed to load message datafile %s\n", message_id);
+ if (spool_read_header(spoolname, TRUE, FALSE) != spool_read_OK)
+ printf ("Failed to load message %s\n", message_id);
+ }
+
+ /* Read a test message from a file. We fudge it up to be on stdin, saving
+ stdin itself for later reading of expansion strings. */
+
+ else if (expansion_test_message != NULL)
+ {
+ int save_stdin = dup(0);
+ int fd = Uopen(expansion_test_message, O_RDONLY, 0);
+ if (fd < 0)
+ {
+ fprintf(stderr, "exim: failed to open %s: %s\n", expansion_test_message,
+ strerror(errno));
+ return EXIT_FAILURE;
+ }
+ (void) dup2(fd, 0);
+ filter_test = FTEST_USER; /* Fudge to make it look like filter test */
+ message_ended = END_NOTENDED;
+ read_message_body(receive_msg(extract_recipients));
+ message_linecount += body_linecount;
+ (void)dup2(save_stdin, 0);
+ (void)close(save_stdin);
+ clearerr(stdin); /* Required by Darwin */
+ }
+
+ /* Allow $recipients for this testing */
+
+ enable_dollar_recipients = TRUE;
+
+ /* Expand command line items */
+
if (recipients_arg < argc)
{
while (recipients_arg < argc)
{
uschar *s = argv[recipients_arg++];
uschar *ss = expand_string(s);
- if (ss == NULL)
- printf ("Failed: %s\n", expand_string_message);
+ if (ss == NULL) printf ("Failed: %s\n", expand_string_message);
else printf("%s\n", CS ss);
}
}
#endif
}
+ /* The data file will be open after -Mset */
+
+ if (deliver_datafile >= 0)
+ {
+ (void)close(deliver_datafile);
+ deliver_datafile = -1;
+ }
+
exim_exit(EXIT_SUCCESS);
}
}
/* Handle host checking: this facility mocks up an incoming SMTP call from a
-given IP address so that the blocking and relay configuration can be tested. An
-RFC 1413 call is made only if we are running in the test harness and an
-incoming interface and both ports are specified, because there is no TCP/IP
-call to find the ident for. */
+given IP address so that the blocking and relay configuration can be tested.
+Unless a sender_ident was set by -oMt, we discard it (the default is the
+caller's login name). An RFC 1413 call is made only if we are running in the
+test harness and an incoming interface and both ports are specified, because
+there is no TCP/IP call to find the ident for. */
if (host_checking)
{
int x[4];
int size;
- sender_ident = NULL;
- if (running_in_test_harness && sender_host_port != 0 &&
- interface_address != NULL && interface_port != 0)
- verify_get_ident(1413);
+ if (!sender_ident_set)
+ {
+ sender_ident = NULL;
+ if (running_in_test_harness && sender_host_port != 0 &&
+ interface_address != NULL && interface_port != 0)
+ verify_get_ident(1413);
+ }
/* In case the given address is a non-canonical IPv6 address, canonicize
it. The code works for both IPv4 and IPv6, as it happens. */
log_write_selector &= ~L_smtp_connection;
log_write(L_smtp_connection, LOG_MAIN, "%s", smtp_get_connection_info());
+ /* NOTE: We do *not* call smtp_log_no_mail() if smtp_start_session() fails,
+ because a log line has already been written for all its failure exists
+ (usually "connection refused: <reason>") and writing another one is
+ unnecessary clutter. */
+
if (smtp_start_session())
{
reset_point = store_get(0);
if (smtp_setup_msg() <= 0) break;
if (!receive_msg(FALSE)) break;
}
+ smtp_log_no_mail();
}
exim_exit(EXIT_SUCCESS);
}
printf("Configuration file is %s\n", config_main_filename);
return EXIT_SUCCESS;
}
+
if (filter_test == FTEST_NONE)
- {
- fprintf(stderr,
-"Exim is a Mail Transfer Agent. It is normally called by Mail User Agents,\n"
-"not directly from a shell command line. Options and/or arguments control\n"
-"what it does when called. For a list of options, see the Exim documentation.\n");
- return EXIT_FAILURE;
- }
+ exim_usage(called_as);
}
if (fstat(1, &statbuf) < 0) (void)dup2(0, 1);
-/* Set up the incoming protocol name and the state of the program. Root
-is allowed to force received protocol via the -oMr option above, and if we are
-in a non-local SMTP state it means we have come via inetd and the process info
-has already been set up. We don't set received_protocol here for smtp input,
-as it varies according to batch/HELO/EHLO/AUTH/TLS. */
+/* Set up the incoming protocol name and the state of the program. Root is
+allowed to force received protocol via the -oMr option above. If we have come
+via inetd, the process info has already been set up. We don't set
+received_protocol here for smtp input, as it varies according to
+batch/HELO/EHLO/AUTH/TLS. */
if (smtp_input)
{
- if (sender_local) set_process_info("accepting a local SMTP message from <%s>",
- sender_address);
+ if (!is_inetd) set_process_info("accepting a local %sSMTP message from <%s>",
+ smtp_batched_input? "batched " : "",
+ (sender_address!= NULL)? sender_address : originator_login);
}
else
{
sender_address);
}
-/* Initialize the local_queue-only flag (this will be ignored if mua_wrapper is
-set) */
+/* Initialize the session_local_queue-only flag (this will be ignored if
+mua_wrapper is set) */
queue_check_only();
-local_queue_only = queue_only;
+session_local_queue_only = queue_only;
/* For non-SMTP and for batched SMTP input, check that there is enough space on
the spool if so configured. On failure, we must not attempt to send an error
return EXIT_FAILURE;
}
-/* If this is smtp input of any kind, handle the start of the SMTP
-session. */
+/* If this is smtp input of any kind, real or batched, handle the start of the
+SMTP session.
+
+NOTE: We do *not* call smtp_log_no_mail() if smtp_start_session() fails,
+because a log line has already been written for all its failure exists
+(usually "connection refused: <reason>") and writing another one is
+unnecessary clutter. */
if (smtp_input)
{
}
}
-/* Otherwise, set up the input size limit here */
+/* Otherwise, set up the input size limit here. */
else
{
- thismessage_size_limit = expand_string_integer(message_size_limit);
- if (thismessage_size_limit < 0)
+ thismessage_size_limit = expand_string_integer(message_size_limit, TRUE);
+ if (expand_string_message != NULL)
{
if (thismessage_size_limit == -1)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to expand "
store_reset(reset_point);
message_id[0] = 0;
- /* In the SMTP case, we have to handle the initial SMTP input and build the
- recipients list, before calling receive_msg() to read the message proper.
- Whatever sender address is actually given in the SMTP transaction is
- actually ignored for local senders - we use the actual sender, which is
- normally either the underlying user running this process or a -f argument
- provided by a trusted caller. It is saved in real_sender_address.
-
- However, if this value is NULL, we are dealing with a trusted caller when
- -f was not used; in this case, the SMTP sender is allowed to stand.
-
- Also, if untrusted_set_sender is set, we permit sender addresses that match
- anything in its list.
-
- The variable raw_sender_address holds the sender address before rewriting. */
+ /* Handle the SMTP case; call smtp_setup_mst() to deal with the initial SMTP
+ input and build the recipients list, before calling receive_msg() to read the
+ message proper. Whatever sender address is given in the SMTP transaction is
+ often ignored for local senders - we use the actual sender, which is normally
+ either the underlying user running this process or a -f argument provided by
+ a trusted caller. It is saved in real_sender_address. The test for whether to
+ accept the SMTP sender is encapsulated in receive_check_set_sender(). */
if (smtp_input)
{
sender_address = raw_sender = real_sender_address;
sender_address_unrewritten = NULL;
}
+
+ /* For batched SMTP, we have to run the acl_not_smtp_start ACL, since it
+ isn't really SMTP, so no other ACL will run until the acl_not_smtp one at
+ the very end. The result of the ACL is ignored (as for other non-SMTP
+ messages). It is run for its potential side effects. */
+
+ if (smtp_batched_input && acl_not_smtp_start != NULL)
+ {
+ uschar *user_msg, *log_msg;
+ enable_dollar_recipients = TRUE;
+ (void)acl_check(ACL_WHERE_NOTSMTP_START, NULL, acl_not_smtp_start,
+ &user_msg, &log_msg);
+ enable_dollar_recipients = FALSE;
+ }
+
+ /* Now get the data for the message */
+
more = receive_msg(extract_recipients);
if (message_id[0] == 0)
{
if (more) continue;
+ smtp_log_no_mail(); /* Log no mail if configured */
exim_exit(EXIT_FAILURE);
}
}
- else exim_exit((rc == 0)? EXIT_SUCCESS : EXIT_FAILURE);
+ else
+ {
+ smtp_log_no_mail(); /* Log no mail if configured */
+ exim_exit((rc == 0)? EXIT_SUCCESS : EXIT_FAILURE);
+ }
}
/* In the non-SMTP case, we have all the information from the command
}
}
+ /* Run the acl_not_smtp_start ACL if required. The result of the ACL is
+ ignored; rejecting here would just add complication, and it can just as
+ well be done later. Allow $recipients to be visible in the ACL. */
+
+ if (acl_not_smtp_start != NULL)
+ {
+ uschar *user_msg, *log_msg;
+ enable_dollar_recipients = TRUE;
+ (void)acl_check(ACL_WHERE_NOTSMTP_START, NULL, acl_not_smtp_start,
+ &user_msg, &log_msg);
+ enable_dollar_recipients = FALSE;
+ }
+
/* Read the data for the message. If filter_test is not FTEST_NONE, this
will just read the headers for the message, and not write anything onto the
spool. */
}
/* Else act on the result of message reception. We should not get here unless
- message_id[0] is non-zero. If queue_only is set, local_queue_only will be
- TRUE. If it is not, check on the number of messages received in this
- connection. If that's OK and queue_only_load is set, check that the load
- average is below it. If it is not, set local_queue_only TRUE. Note that it
- then remains this way for any subsequent messages on the same SMTP connection.
- This is a deliberate choice; even though the load average may fall, it
- doesn't seem right to deliver later messages on the same call when not
- delivering earlier ones. */
-
- if (!local_queue_only)
+ message_id[0] is non-zero. If queue_only is set, session_local_queue_only
+ will be TRUE. If it is not, check on the number of messages received in this
+ connection. */
+
+ if (!session_local_queue_only &&
+ smtp_accept_queue_per_connection > 0 &&
+ receive_messagecount > smtp_accept_queue_per_connection)
{
- if (smtp_accept_queue_per_connection > 0 &&
- receive_messagecount > smtp_accept_queue_per_connection)
- {
- local_queue_only = TRUE;
- queue_only_reason = 2;
- }
- else if (queue_only_load >= 0)
+ session_local_queue_only = TRUE;
+ queue_only_reason = 2;
+ }
+
+ /* Initialize local_queue_only from session_local_queue_only. If it is false,
+ and queue_only_load is set, check that the load average is below it. If it is
+ not, set local_queue_only TRUE. If queue_only_load_latch is true (the
+ default), we put the whole session into queue_only mode. It then remains this
+ way for any subsequent messages on the same SMTP connection. This is a
+ deliberate choice; even though the load average may fall, it doesn't seem
+ right to deliver later messages on the same call when not delivering earlier
+ ones. However, there are odd cases where this is not wanted, so this can be
+ changed by setting queue_only_load_latch false. */
+
+ local_queue_only = session_local_queue_only;
+ if (!local_queue_only && queue_only_load >= 0)
+ {
+ local_queue_only = (load_average = OS_GETLOADAVG()) > queue_only_load;
+ if (local_queue_only)
{
- local_queue_only = (load_average = os_getloadavg()) > queue_only_load;
- if (local_queue_only) queue_only_reason = 3;
+ queue_only_reason = 3;
+ if (queue_only_load_latch) session_local_queue_only = TRUE;
}
}