-$Cambridge: exim/doc/doc-txt/experimental-spec.txt,v 1.11 2008/02/12 12:52:51 nm4 Exp $
-
From time to time, experimental features may be added to Exim.
While a feature is experimental, there will be a build-time
option whose name starts "EXPERIMENTAL_" that must be set in
order to include the feature. This file contains information
-about experimenatal features, all of which are unstable and
-liable to incompatibile change.
-
-
-0. DKIM support
---------------------------------------------------------------
-
-DKIM support is implemented via libdkim. A compatible version
-is available here:
-
-http://duncanthrax.net/exim-experimental/libdkim-1.0.15-tk.tar.gz
-
-Build the lib according to the instructions in the enclosed
-INSTALL file.
-
-To build Exim with DKIM support, specify this in Local/Makefile:
-
-EXPERIMENTAL_DKIM=yes
-CFLAGS += -I/home/tom/libdkim/include
-LDFLAGS += -ldkim -lssl -lstdc++ -L/home/tom/libdkim/lib
-
-Remember to tweak the CFLAGS and LDFLAGS lines to match the
-location of the libdomainkeys includes and lib on your system.
-
-The current experimental implementation supports two independent
-functions:
-
-o Validate incoming DKIM-signed email.
-o Sign outgoing email with DKIM.
-
-The former is implemented in the ACLs for SMTP, the latter as
-an extension to the SMTP transport. That means both facilities
-are limited to SMTP I/O.
-
-
-1) Validate incoming email
-
-Incoming messages are fed to the DKIM validation process as they
-are received "on the wire". This happens synchronously to Exim's
-buffering of the message in the spool.
-
-You must set "control = dkim_verify" in one of the ACLs preceding
-DATA (you will typically use acl_smtp_rcpt), at a point where
-non-local, non-relay, non-submission mail is processed. If that
-control flag is not set, the message will NOT be verified.
-
-Example:
-
-warn log_message = Feeding message to DKIM validator.
- control = dk_verify
-
-You can then check for DKIM signatures in the ACL after data
-(acl_smtp_data), using the 'dkim' query-style lookup type. The
-query string should be a domain or DKIM identity:
-
-${lookup dkim{domain.example}}
-
-Such a lookup will yield one of the following strings:
-
-unverified: Exim did not (yet) verify the eventual DKIM
- signatures in this message. This may happen
- if a) You did not use control=dkim_verify
- or b) You are using the lookup before
- the DATA ACL.
-
-unsigned: The message does not have a signature from
- the specified domain.
-
-good: The message has a signature from the specified
- domain, and it verified successfully.
-
-bad: The message has a signature from the specified
- domain, but it did not verify.
-
-defer: A temporary DNS problem was encountered while
- trying to verify the signature.
-
-
-
-2) Sign outgoing email with DKIM
-
-Outgoing messages are signed just before Exim puts them "on
-the wire". The only thing that happens after DKIM signing is
-eventual TLS encryption.
-
-Signing is implemented by setting private options on the SMTP
-transport. These options take (expandable) strings as
-arguments.
-
- dkim_domain = <expanded string> [MANDATORY]
-
- The domain you want to sign with. Should optimally match
- the domain in the "From:" header of the message, but
- does not necessarily have to. The result of this expanded
- option is put into the $dkim_domain expansion variable.
-
- dkim_selector = <expanded string> [MANDATORY]
-
- This sets the key selector string. You can use the
- $dkim_domain expansion variable to look up a matching
- selector. The result is put in the expansion variable
- $dkim_selector which should be used in the dkim_private_key
- option along with $dkim_domain.
-
- dkim_private_key = <expanded string> [MANDATORY]
-
- This sets the private key to use. You can use the
- $dkim_domain and $dkim_selector expansion variables to
- determine the private key to use. The result can either
-
- o be a valid RSA private key in ASCII armor, including
- line breaks.
- o start with a slash, in which case it is treated as
- a file that contains the private key.
- o be "0", "false" or the empty string, in which case
- the message will not be signed. This case will not
- result in an error, even if dkim_strict is set.
-
- dkim_canon = <expanded string> [OPTIONAL]
-
- This option sets the canonicalization method used when
- signing a message. The DKIM RFC currently supports two
- methods: "simple" and "relaxed". The option defaults to
- "relaxed" when unset. Note: the current implementation
- only support using the same canonicalization method for
- both headers and body.
-
- dkim_strict = <expanded string> [OPTIONAL]
-
- This option defines how Exim behaves when signing a
- message that should be signed fails for some reason. When
- the expansion evaluates to either "1" or "true", Exim will
- defer. Otherwise Exim will send the message unsigned. You
- can use the $dkim_domain and $dkim_selector expansion
- variables here.
-
- dkim_sign_headers = <expanded string> [OPTIONAL]
-
- When set, this option must expand to (or be specified as)
- a colon-separated list of header names. These headers will
- be included in the message signature. When unspecified,
- the recommended headers will be used. Currently, these
- are:
-
- from:sender:reply-to:subject:date:
- message-id:to:cc:mime-version:content-type:
- content-transfer-encoding:content-id:
- content-description:resent-date:resent-from:
- resent-sender:resent-to:resent-cc:resent-message-id:
- in-reply-to:references:
- list-id:list-help:list-unsubscribe:
- list-subscribe:list-post:list-owner:list-archive
-
-
-
-
-1. Yahoo DomainKeys support
---------------------------------------------------------------
-
-DomainKeys (DK) support is built into Exim using the
-"libdomainkeys" reference library implementation. It is
-available at
-
-http://domainkeys.sf.net
-
-You must build this library on your system and compile Exim
-against it. To build Exim with DK support, add these lines to
-your Local/Makefile:
-
-EXPERIMENTAL_DOMAINKEYS=yes
-CFLAGS += -I/home/tom/exim-cvs/extra/libdomainkeys
-LDFLAGS += -ldomainkeys -L/home/tom/exim-cvs/extra/libdomainkeys
-
-Remember to tweak the CFLAGS and LDFLAGS lines to match the
-location of the libdomainkeys includes and lib on your system.
-
-The current experimental implementation supports two
-independent functions:
-
-o Validate incoming DK-signed email.
-o Sign outgoing email with DK.
-
-The former is implemented in the ACLs for SMTP, the latter as
-an extension to the SMTP transport. That means both facilities
-are limited to SMTP I/O.
-
-
-
-1) Validate incoming email
-
-Incoming messages are fed to the DK validation process as they
-are received "on the wire". This happens synchronously to
-Exim's buffering of the message in the spool.
-
-You must set "control = dk_verify" in one of the ACLs
-preceding DATA (you will typically use acl_smtp_rcpt), at a
-point where non-local, non-relay, non-submission mail is
-processed. If that control flag is not set, the message will
-NOT be verified.
-
-Example:
-
-warn log_message = Feeding message to DK validator.
- control = dk_verify
-
-You can check for the outcome of the DK check in the ACL after
-data (acl_smtp_data), using a number of ACL conditions and/or
-expansion variables.
-
-
-
-1.1.) DK ACL conditions
-
- dk_sender_domains = <domain list>
-
- This condition takes a domainlist as argument and
- succeeds if the domain that DK has been verifying for is
- found in the list.
-
-
- dk_senders = <address list>
-
- This condition takes an addresslist as argument and
- succeeds if the address that DK has been verifying for
- is found in the list.
-
-
- dk_sender_local_parts = <local part list>
-
- This condition takes a local_part list as argument
- and succeeds if the domain that DK has been
- verifying for is found in the list.
-
-
- dk_status = <colon separated list of keywords>
-
- This condition takes a list of keywords as argument, and
- succeeds if one of the listed keywords matches the outcome
- of the DK check. The available keywords are:
-
- good DK check succeeded, mail is verified.
- bad DK check failed.
- no signature Mail is not signed with DK.
- no key Public key missing in target domain DNS.
- bad format Public key available, but unuseable.
- non-participant Target domain states not to participate in DK.
- revoked The signing key has been revoked by the domain.
-
-
- dk_policy = <colon separated list of keywords>
-
- This condition takes a list of keywords as argument, and
- succeeds if one of the listed keywords matches the policy
- announced by the target domain. The available keywords
- are:
-
- signsall The target domain signs all outgoing email.
- testing The target domain is currently testing DK.
-
-
- dk_domain_source = <colon separated list of keywords>
-
- This condition takes a list of keywords as argument, and
- succeeds if one of the listed keywords matches the
- location where DK found the sender domain it verified for.
- The available keywords are:
-
- from The domain came from the "From:" header.
- sender The domain came from the "Sender:" header.
- none DK was unable to find the responsible domain.
-
-
-
-1.2.) DK verification expansion variables
-
- $dk_sender_domain
-
- Contains the domain that DK has verified for.
-
-
- $dk_sender
-
- Contains the address that DK has verified for.
-
-
- $dk_sender_local_part
-
- Contains the local part that DK has verified for.
-
-
- $dk_sender_source
-
- Contains the "source" of the above three variables, one of
-
- "from" The address came from the "From:" header.
- "sender" The address came from the "Sender:" header.
-
- When DK was unable to find a valid address, this variable
- is "0".
-
-
- $dk_signsall
-
- Is "1" if the target domain signs all outgoing email,
- "0" otherwise.
-
-
- $dk_testing
-
- Is "1" if the target domain is testing DK, "0" otherwise.
-
-
- $dk_is_signed
-
- Is "1" if the message is signed, "0" otherwise.
-
-
- $dk_status
-
- Contains the outcome of the DK check as a string, commonly
- used to add a "DomainKey-Status:" header to messages. Will
- contain one of:
-
- good DK check succeeded, mail is verified.
- bad DK check failed.
- no signature Mail is not signed with DK.
- no key Public key missing in target domain DNS.
- bad format Public key available, but unuseable.
- non-participant Target domain states not to participate in DK.
- revoked The signing key has been revoked by the domain.
-
-
- $dk_result
-
- Contains a human-readable result of the DK check, more
- verbose than $dk_status. Useful for logging purposes.
-
-
-
-2) Sign outgoing email with DK
-
-Outgoing messages are signed just before Exim puts them "on
-the wire". The only thing that happens after DK signing is
-eventual TLS encryption.
-
-Signing is implemented by setting private options on the SMTP
-transport. These options take (expandable) strings as
-arguments. The most important variable to use in these
-expansions is $dk_domain. It contains the domain that DK wants
-to sign for.
-
-
- dk_selector = <expanded string> [MANDATORY]
-
- This sets the key selector string. You can use the
- $dk_domain expansion variable to look up a matching
- selector. The result is put in the expansion variable
- $dk_selector which should be used in the dk_private_key
- option along with $dk_domain.
-
-
- dk_private_key = <expanded string> [MANDATORY]
-
- This sets the private key to use. You SHOULD use the
- $dk_domain and $dk_selector expansion variables to
- determine the private key to use. The result can either
-
- o be a valid RSA private key in ASCII armor, including
- line breaks.
- o start with a slash, in which case it is treated as
- a file that contains the private key.
- o be "0", "false" or the empty string, in which case
- the message will not be signed. This case will not
- result in an error, even if dk_strict is set.
-
-
- dk_canon = <expanded string> [OPTIONAL]
-
- This option sets the canonicalization method used when
- signing a message. The DK draft currently supports two
- methods: "simple" and "nofws". The option defaults to
- "simple" when unset.
+about experimental features, all of which are unstable and
+liable to incompatible change.
- dk_strict = <expanded string> [OPTIONAL]
-
- This option defines how Exim behaves when signing a
- message that should be signed fails for some reason. When
- the expansion evaluates to either "1" or "true", Exim will
- defer. Otherwise Exim will send the message unsigned. You
- can and should use the $dk_domain and $dk_selector
- expansion variables here.
-
-
- dk_domain = <expanded string> [NOT RECOMMENDED]
-
- This option overrides DKs autodetection of the signing
- domain. You should only use this option if you know what
- you are doing. The result of the string expansion is also
- put in $dk_domain.
-
-
-
-
-2. Brightmail AntiSpam (BMI) suppport
+Brightmail AntiSpam (BMI) suppport
--------------------------------------------------------------
Brightmail AntiSpam is a commercial package. Please see
-3. Sender Policy Framework (SPF) support
+Sender Policy Framework (SPF) support
--------------------------------------------------------------
To learn more about SPF, visit http://www.openspf.org. This
You can now run SPF checks in incoming SMTP by using the "spf"
ACL condition in either the MAIL, RCPT or DATA ACLs. When
-using it in the RCPT ACL, you can make the checks dependend on
+using it in the RCPT ACL, you can make the checks dependent on
the RCPT address (or domain), so you can check SPF records
only for certain target domains. This gives you the
possibility to opt-out certain customers that do not want
This means the queried domain has published
a SPF record, but wants to allow outside
servers to send mail under its domain as well.
- o err_perm This indicates a syntax error in the SPF
- record of the queried domain. This should be
- treated like "none".
- o err_temp This indicates a temporary error during all
+ This should be treated like "none".
+ o permerror This indicates a syntax error in the SPF
+ record of the queried domain. You may deny
+ messages when this occurs. (Changed in 4.83)
+ o temperror This indicates a temporary error during all
processing, including Exim's SPF processing.
You may defer messages when this occurs.
+ (Changed in 4.83)
+ o err_temp Same as permerror, deprecated in 4.83, will be
+ removed in a future release.
+ o err_perm Same as temperror, deprecated in 4.83, will be
+ removed in a future release.
You can prefix each string with an exclamation mark to invert
-is meaning, for example "!fail" will match all results but
+its meaning, for example "!fail" will match all results but
"fail". The string list is evaluated left-to-right, in a
short-circuit fashion. When a string matches the outcome of
the SPF check, the condition succeeds. If none of the listed
$spf_result
This contains the outcome of the SPF check in string form,
- one of pass, fail, softfail, none, neutral, err_perm or
- err_temp.
+ one of pass, fail, softfail, none, neutral, permerror or
+ temperror.
$spf_smtp_comment
This contains a string that can be used in a SMTP response
When the spf_guess condition has run, it sets up the same expansion
variables as when spf condition is run, described above.
-Additionally, since Best-guess is not standarized, you may redefine
+Additionally, since Best-guess is not standardized, you may redefine
what "Best-guess" means to you by redefining spf_guess variable in
global config. For example, the following:
would relax host matching rules to a broader network range.
-4. SRS (Sender Rewriting Scheme) Support
+SRS (Sender Rewriting Scheme) Support
--------------------------------------------------------------
Exiscan currently includes SRS support via Miles Wilton's
in your Local/Makefile.
+DCC Support
+--------------------------------------------------------------
+
+*) Building exim
+
+In order to build exim with DCC support add
+
+EXPERIMENTAL_DCC=yes
+
+to your Makefile. (Re-)build/install exim. exim -d should show
+EXPERIMENTAL_DCC under "Support for".
+
+
+*) Configuration
+
+In the main section of exim.cf add at least
+ dccifd_address = /usr/local/dcc/var/dccifd
+or
+ dccifd_address = <ip> <port>
+
+In the DATA ACL you can use the new condition
+ dcc = *
+
+After that "$dcc_header" contains the X-DCC-Header.
+
+Return values are:
+ fail for overall "R", "G" from dccifd
+ defer for overall "T" from dccifd
+ accept for overall "A", "S" from dccifd
+
+dcc = */defer_ok works as for spamd.
+
+The "$dcc_result" variable contains the overall result from DCC
+answer. There will an X-DCC: header added to the mail.
+
+Usually you'll use
+ defer !dcc = *
+to greylist with DCC.
+
+If you set, in the main section,
+ dcc_direct_add_header = true
+then the dcc header will be added "in deep" and if the spool
+file was already written it gets removed. This forces Exim to
+write it again if needed. This helps to get the DCC Header
+through to eg. SpamAssassin.
+
+If you want to pass even more headers in the middle of the
+DATA stage you can set
+ $acl_m_dcc_add_header
+to tell the DCC routines to add more information; eg, you might set
+this to some results from ClamAV. Be careful. Header syntax is
+not checked and is added "as is".
+
+In case you've troubles with sites sending the same queue items from several
+hosts and fail to get through greylisting you can use
+$acl_m_dcc_override_client_ip
+
+Setting $acl_m_dcc_override_client_ip to an IP address overrides the default
+of $sender_host_address. eg. use the following ACL in DATA stage:
+
+ warn set acl_m_dcc_override_client_ip = \
+ ${lookup{$sender_helo_name}nwildlsearch{/etc/mail/multipleip_sites}{$value}{}}
+ condition = ${if def:acl_m_dcc_override_client_ip}
+ log_message = dbg: acl_m_dcc_override_client_ip set to \
+ $acl_m_dcc_override_client_ip
+
+Then set something like
+# cat /etc/mail/multipleip_sites
+mout-xforward.gmx.net 82.165.159.12
+mout.gmx.net 212.227.15.16
+
+Use a reasonable IP. eg. one the sending cluster acutally uses.
+
+DMARC Support
+--------------------------------------------------------------
+
+DMARC combines feedback from SPF, DKIM, and header From: in order
+to attempt to provide better indicators of the authenticity of an
+email. This document does not explain the fundamentals, you
+should read and understand how it works by visiting the website at
+http://www.dmarc.org/.
+
+DMARC support is added via the libopendmarc library. Visit:
+
+ http://sourceforge.net/projects/opendmarc/
+
+to obtain a copy, or find it in your favorite rpm package
+repository. If building from source, this description assumes
+that headers will be in /usr/local/include, and that the libraries
+are in /usr/local/lib.
+
+1. To compile Exim with DMARC support, you must first enable SPF.
+Please read the above section on enabling the EXPERIMENTAL_SPF
+feature. You must also have DKIM support, so you cannot set the
+DISABLE_DKIM feature. Once both of those conditions have been met
+you can enable DMARC in Local/Makefile:
+
+EXPERIMENTAL_DMARC=yes
+LDFLAGS += -lopendmarc
+# CFLAGS += -I/usr/local/include
+# LDFLAGS += -L/usr/local/lib
+
+The first line sets the feature to include the correct code, and
+the second line says to link the libopendmarc libraries into the
+exim binary. The commented out lines should be uncommented if you
+built opendmarc from source and installed in the default location.
+Adjust the paths if you installed them elsewhere, but you do not
+need to uncomment them if an rpm (or you) installed them in the
+package controlled locations (/usr/include and /usr/lib).
+
+
+2. Use the following global settings to configure DMARC:
+
+Required:
+dmarc_tld_file Defines the location of a text file of valid
+ top level domains the opendmarc library uses
+ during domain parsing. Maintained by Mozilla,
+ the most current version can be downloaded
+ from a link at http://publicsuffix.org/list/.
+
+Optional:
+dmarc_history_file Defines the location of a file to log results
+ of dmarc verification on inbound emails. The
+ contents are importable by the opendmarc tools
+ which will manage the data, send out DMARC
+ reports, and expire the data. Make sure the
+ directory of this file is writable by the user
+ exim runs as.
+
+dmarc_forensic_sender The email address to use when sending a
+ forensic report detailing alignment failures
+ if a sender domain's dmarc record specifies it
+ and you have configured Exim to send them.
+ Default: do-not-reply@$default_hostname
+
+
+3. By default, the DMARC processing will run for any remote,
+non-authenticated user. It makes sense to only verify DMARC
+status of messages coming from remote, untrusted sources. You can
+use standard conditions such as hosts, senders, etc, to decide that
+DMARC verification should *not* be performed for them and disable
+DMARC with a control setting:
+
+ control = dmarc_disable_verify
+
+A DMARC record can also specify a "forensic address", which gives
+exim an email address to submit reports about failed alignment.
+Exim does not do this by default because in certain conditions it
+results in unintended information leakage (what lists a user might
+be subscribed to, etc). You must configure exim to submit forensic
+reports to the owner of the domain. If the DMARC record contains a
+forensic address and you specify the control statement below, then
+exim will send these forensic emails. It's also advised that you
+configure a dmarc_forensic_sender because the default sender address
+construction might be inadequate.
+
+ control = dmarc_forensic_enable
+
+(AGAIN: You can choose not to send these forensic reports by simply
+not putting the dmarc_forensic_enable control line at any point in
+your exim config. If you don't tell it to send them, it will not
+send them.)
+
+There are no options to either control. Both must appear before
+the DATA acl.
+
+
+4. You can now run DMARC checks in incoming SMTP by using the
+"dmarc_status" ACL condition in the DATA ACL. You are required to
+call the spf condition first in the ACLs, then the "dmarc_status"
+condition. Putting this condition in the ACLs is required in order
+for a DMARC check to actually occur. All of the variables are set
+up before the DATA ACL, but there is no actual DMARC check that
+occurs until a "dmarc_status" condition is encountered in the ACLs.
+
+The dmarc_status condition takes a list of strings on its
+right-hand side. These strings describe recommended action based
+on the DMARC check. To understand what the policy recommendations
+mean, refer to the DMARC website above. Valid strings are:
+
+ o accept The DMARC check passed and the library recommends
+ accepting the email.
+ o reject The DMARC check failed and the library recommends
+ rejecting the email.
+ o quarantine The DMARC check failed and the library recommends
+ keeping it for further inspection.
+ o none The DMARC check passed and the library recommends
+ no specific action, neutral.
+ o norecord No policy section in the DMARC record for this
+ sender domain.
+ o nofrom Unable to determine the domain of the sender.
+ o temperror Library error or dns error.
+ o off The DMARC check was disabled for this email.
+
+You can prefix each string with an exclamation mark to invert its
+meaning, for example "!accept" will match all results but
+"accept". The string list is evaluated left-to-right in a
+short-circuit fashion. When a string matches the outcome of the
+DMARC check, the condition succeeds. If none of the listed
+strings matches the outcome of the DMARC check, the condition
+fails.
+
+Of course, you can also use any other lookup method that Exim
+supports, including LDAP, Postgres, MySQL, etc, as long as the
+result is a list of colon-separated strings.
+
+Several expansion variables are set before the DATA ACL is
+processed, and you can use them in this ACL. The following
+expansion variables are available:
+
+ o $dmarc_status
+ This is a one word status indicating what the DMARC library
+ thinks of the email. It is a combination of the results of
+ DMARC record lookup and the SPF/DKIM/DMARC processing results
+ (if a DMARC record was found). The actual policy declared
+ in the DMARC record is in a separate expansion variable.
+
+ o $dmarc_status_text
+ This is a slightly longer, human readable status.
+
+ o $dmarc_used_domain
+ This is the domain which DMARC used to look up the DMARC
+ policy record.
+
+ o $dmarc_domain_policy
+ This is the policy declared in the DMARC record. Valid values
+ are "none", "reject" and "quarantine". It is blank when there
+ is any error, including no DMARC record.
+
+ o $dmarc_ar_header
+ This is the entire Authentication-Results header which you can
+ add using an add_header modifier.
+
+
+5. How to enable DMARC advanced operation:
+By default, Exim's DMARC configuration is intended to be
+non-intrusive and conservative. To facilitate this, Exim will not
+create any type of logging files without explicit configuration by
+you, the admin. Nor will Exim send out any emails/reports about
+DMARC issues without explicit configuration by you, the admin (other
+than typical bounce messages that may come about due to ACL
+processing or failure delivery issues).
+
+In order to log statistics suitable to be imported by the opendmarc
+tools, you need to:
+a. Configure the global setting dmarc_history_file.
+b. Configure cron jobs to call the appropriate opendmarc history
+ import scripts and truncating the dmarc_history_file.
+
+In order to send forensic reports, you need to:
+a. Configure the global setting dmarc_forensic_sender.
+b. Configure, somewhere before the DATA ACL, the control option to
+ enable sending DMARC forensic reports.
+
+
+6. Example usage:
+(RCPT ACL)
+ warn domains = +local_domains
+ hosts = +local_hosts
+ control = dmarc_disable_verify
+
+ warn !domains = +screwed_up_dmarc_records
+ control = dmarc_enable_forensic
+
+ warn condition = (lookup if destined to mailing list)
+ set acl_m_mailing_list = 1
+
+(DATA ACL)
+ warn dmarc_status = accept : none : off
+ !authenticated = *
+ log_message = DMARC DEBUG: $dmarc_status $dmarc_used_domain
+ add_header = $dmarc_ar_header
+
+ warn dmarc_status = !accept
+ !authenticated = *
+ log_message = DMARC DEBUG: '$dmarc_status' for $dmarc_used_domain
+
+ warn dmarc_status = quarantine
+ !authenticated = *
+ set $acl_m_quarantine = 1
+ # Do something in a transport with this flag variable
+
+ deny condition = ${if eq{$dmarc_domain_policy}{reject}}
+ condition = ${if eq{$acl_m_mailing_list}{1}}
+ message = Messages from $dmarc_used_domain break mailing lists
+
+ deny dmarc_status = reject
+ !authenticated = *
+ message = Message from $domain_used_domain failed sender's DMARC policy, REJECT
+
+
+
+Transport post-delivery actions
+--------------------------------------------------------------
+
+An arbitrary per-transport string can be expanded on successful delivery,
+and (for SMTP transports) a second string on deferrals caused by a host error.
+This feature may be used, for example, to write exim internal log information
+(not available otherwise) into a database.
+
+In order to use the feature, you must compile with
+
+EXPERIMENTAL_TPDA=yes
+
+in your Local/Makefile
+
+and define the tpda_event_action option in the transport, to
+be expanded when the event fires.
+
+A new variable, $tpda_event, is set to the event type when the
+expansion is done. The current list of events is:
+
+ msg:delivery
+ msg:host:defer
+ tcp:connect
+ tcp:close
+ tls:cert
+ smtp:connect
+
+The expansion is called for all event types, and should use the $tpda_event
+value to decide when to act. The variable data is a colon-separated
+list, describing an event tree.
+
+There is an auxilary variable, $tpda_data, for which the
+content is event_dependent:
+
+ msg:delivery smtp confirmation mssage
+ msg:host:defer error string
+ tls:cert verification chain depth
+ smtp:connect smtp banner
+
+The msg:host:defer event populates one extra variable, $tpda_defer_errno.
+
+The following variables are likely to be useful for most event types:
+
+ router_name, transport_name
+ local_part, domain
+ host, host_address, host_port
+ tls_out_peercert
+ lookup_dnssec_authenticated, tls_out_dane
+ sending_ip_address, sending_port
+
+
+An example might look like:
+
+tpda_event_action = ${if = {msg:delivery}{$tpda_event} \
+{${lookup pgsql {SELECT * FROM record_Delivery( \
+ '${quote_pgsql:$sender_address_domain}',\
+ '${quote_pgsql:${lc:$sender_address_local_part}}', \
+ '${quote_pgsql:$domain}', \
+ '${quote_pgsql:${lc:$local_part}}', \
+ '${quote_pgsql:$host_address}', \
+ '${quote_pgsql:${lc:$host}}', \
+ '${quote_pgsql:$message_exim_id}')}} \
+} {}}
+
+The string is expanded after the delivery completes and any
+side-effects will happen. The result is then discarded.
+Note that for complex operations an ACL expansion can be used.
+
+During the expansion the tpda_event variable will contain the
+string-list "msg:delivery".
+
+
+The expansion of the tpda_event_action option should normally
+return an empty string. Should it return anything else the
+following will be forced:
+
+ msg:delivery (ignored)
+ msg:host:defer (ignored)
+ tcp:connect do not connect
+ tcp:close (ignored)
+ tls:cert refuse verification
+ smtp:connect close connection
+
+
+
+
+
+Redis Lookup
+--------------------------------------------------------------
+
+Redis is open source advanced key-value data store. This document
+does not explain the fundamentals, you should read and understand how
+it works by visiting the website at http://www.redis.io/.
+
+Redis lookup support is added via the hiredis library. Visit:
+
+ https://github.com/redis/hiredis
+
+to obtain a copy, or find it in your operating systems package repository.
+If building from source, this description assumes that headers will be in
+/usr/local/include, and that the libraries are in /usr/local/lib.
+
+1. In order to build exim with Redis lookup support add
+
+EXPERIMENTAL_REDIS=yes
+
+to your Local/Makefile. (Re-)build/install exim. exim -d should show
+Experimental_Redis in the line "Support for:".
+
+EXPERIMENTAL_REDIS=yes
+LDFLAGS += -lhiredis
+# CFLAGS += -I/usr/local/include
+# LDFLAGS += -L/usr/local/lib
+
+The first line sets the feature to include the correct code, and
+the second line says to link the hiredis libraries into the
+exim binary. The commented out lines should be uncommented if you
+built hiredis from source and installed in the default location.
+Adjust the paths if you installed them elsewhere, but you do not
+need to uncomment them if an rpm (or you) installed them in the
+package controlled locations (/usr/include and /usr/lib).
+
+
+2. Use the following global settings to configure Redis lookup support:
+
+Required:
+redis_servers This option provides a list of Redis servers
+ and associated connection data, to be used in
+ conjunction with redis lookups. The option is
+ only available if Exim is configured with Redis
+ support.
+
+For example:
+
+redis_servers = 127.0.0.1/10/ - using database 10 with no password
+redis_servers = 127.0.0.1//password - to make use of the default database of 0 with a password
+redis_servers = 127.0.0.1// - for default database of 0 with no password
+
+3. Once you have the Redis servers defined you can then make use of the
+experimental Redis lookup by specifying ${lookup redis{}} in a lookup query.
+
+4. Example usage:
+
+(Host List)
+hostlist relay_from_ips = <\n ${lookup redis{SMEMBERS relay_from_ips}}
+
+Where relay_from_ips is a Redis set which contains entries such as "192.168.0.0/24" "10.0.0.0/8" and so on.
+The result set is returned as
+192.168.0.0/24
+10.0.0.0/8
+..
+.
+
+(Domain list)
+domainlist virtual_domains = ${lookup redis {HGET $domain domain}}
+
+Where $domain is a hash which includes the key 'domain' and the value '$domain'.
+
+(Adding or updating an existing key)
+set acl_c_spammer = ${if eq{${lookup redis{SPAMMER_SET}}}{OK}}
+
+Where SPAMMER_SET is a macro and it is defined as
+
+"SET SPAMMER <some_value>"
+
+(Getting a value from Redis)
+
+set acl_c_spam_host = ${lookup redis{GET...}}
+
+
+Proxy Protocol Support
+--------------------------------------------------------------
+
+Exim now has Experimental "Proxy Protocol" support. It was built on
+specifications from:
+http://haproxy.1wt.eu/download/1.5/doc/proxy-protocol.txt
+Above URL revised May 2014 to change version 2 spec:
+http://git.1wt.eu/web?p=haproxy.git;a=commitdiff;h=afb768340c9d7e50d8e
+
+The purpose of this function is so that an application load balancer,
+such as HAProxy, can sit in front of several Exim servers and Exim
+will log the IP that is connecting to the proxy server instead of
+the IP of the proxy server when it connects to Exim. It resets the
+$sender_address_host and $sender_address_port to the IP:port of the
+connection to the proxy. It also re-queries the DNS information for
+this new IP address so that the original sender's hostname and IP
+get logged in the Exim logfile. There is no logging if a host passes or
+fails Proxy Protocol negotiation, but it can easily be determined and
+recorded in an ACL (example is below).
+
+1. To compile Exim with Proxy Protocol support, put this in
+Local/Makefile:
+
+EXPERIMENTAL_PROXY=yes
+
+2. Global configuration settings:
+
+proxy_required_hosts = HOSTLIST
+
+The proxy_required_hosts option will require any IP in that hostlist
+to use Proxy Protocol. The specification of Proxy Protocol is very
+strict, and if proxy negotiation fails, Exim will not allow any SMTP
+command other than QUIT. (See end of this section for an example.)
+The option is expanded when used, so it can be a hostlist as well as
+string of IP addresses. Since it is expanded, specifying an alternate
+separator is supported for ease of use with IPv6 addresses.
+
+To log the IP of the proxy in the incoming logline, add:
+ log_selector = +proxy
+
+A default incoming logline (wrapped for appearance) will look like this:
+
+ 2013-11-04 09:25:06 1VdNti-0001OY-1V <= me@example.net
+ H=mail.example.net [1.2.3.4] P=esmtp S=433
+
+With the log selector enabled, an email that was proxied through a
+Proxy Protocol server at 192.168.1.2 will look like this:
+
+ 2013-11-04 09:25:06 1VdNti-0001OY-1V <= me@example.net
+ H=mail.example.net [1.2.3.4] P=esmtp PRX=192.168.1.2 S=433
+
+3. In the ACL's the following expansion variables are available.
+
+proxy_host_address The (internal) src IP of the proxy server
+ making the connection to the Exim server.
+proxy_host_port The (internal) src port the proxy server is
+ using to connect to the Exim server.
+proxy_target_address The dest (public) IP of the remote host to
+ the proxy server.
+proxy_target_port The dest port the remote host is using to
+ connect to the proxy server.
+proxy_session Boolean, yes/no, the connected host is required
+ to use Proxy Protocol.
+
+There is no expansion for a failed proxy session, however you can detect
+it by checking if $proxy_session is true but $proxy_host is empty. As
+an example, in my connect ACL, I have:
+
+ warn condition = ${if and{ {bool{$proxy_session}} \
+ {eq{$proxy_host_address}{}} } }
+ log_message = Failed required proxy protocol negotiation \
+ from $sender_host_name [$sender_host_address]
+
+ warn condition = ${if and{ {bool{$proxy_session}} \
+ {!eq{$proxy_host_address}{}} } }
+ # But don't log health probes from the proxy itself
+ condition = ${if eq{$proxy_host_address}{$sender_host_address} \
+ {false}{true}}
+ log_message = Successfully proxied from $sender_host_name \
+ [$sender_host_address] through proxy protocol \
+ host $proxy_host_address
+
+ # Possibly more clear
+ warn logwrite = Remote Source Address: $sender_host_address:$sender_host_port
+ logwrite = Proxy Target Address: $proxy_target_address:$proxy_target_port
+ logwrite = Proxy Internal Address: $proxy_host_address:$proxy_host_port
+ logwrite = Internal Server Address: $received_ip_address:$received_port
+
+
+4. Recommended ACL additions:
+ - Since the real connections are all coming from your proxy, and the
+ per host connection tracking is done before Proxy Protocol is
+ evaluated, smtp_accept_max_per_host must be set high enough to
+ handle all of the parallel volume you expect per inbound proxy.
+ - With the smtp_accept_max_per_host set so high, you lose the ability
+ to protect your server from massive numbers of inbound connections
+ from one IP. In order to prevent your server from being DOS'd, you
+ need to add a per connection ratelimit to your connect ACL. I
+ suggest something like this:
+
+ # Set max number of connections per host
+ LIMIT = 5
+ # Or do some kind of IP lookup in a flat file or database
+ # LIMIT = ${lookup{$sender_host_address}iplsearch{/etc/exim/proxy_limits}}
+
+ defer message = Too many connections from this IP right now
+ ratelimit = LIMIT / 5s / per_conn / strict
+
+
+5. Runtime issues to be aware of:
+ - The proxy has 3 seconds (hard-coded in the source code) to send the
+ required Proxy Protocol header after it connects. If it does not,
+ the response to any commands will be:
+ "503 Command refused, required Proxy negotiation failed"
+ - If the incoming connection is configured in Exim to be a Proxy
+ Protocol host, but the proxy is not sending the header, the banner
+ does not get sent until the timeout occurs. If the sending host
+ sent any input (before the banner), this causes a standard Exim
+ synchronization error (i.e. trying to pipeline before PIPELINING
+ was advertised).
+ - This is not advised, but is mentioned for completeness if you have
+ a specific internal configuration that you want this: If the Exim
+ server only has an internal IP address and no other machines in your
+ organization will connect to it to try to send email, you may
+ simply set the hostlist to "*", however, this will prevent local
+ mail programs from working because that would require mail from
+ localhost to use Proxy Protocol. Again, not advised!
+
+6. Example of a refused connection because the Proxy Protocol header was
+not sent from a host configured to use Proxy Protocol. In the example,
+the 3 second timeout occurred (when a Proxy Protocol banner should have
+been sent), the banner was displayed to the user, but all commands are
+rejected except for QUIT:
+
+# nc mail.example.net 25
+220-mail.example.net, ESMTP Exim 4.82+proxy, Mon, 04 Nov 2013 10:45:59
+220 -0800 RFC's enforced
+EHLO localhost
+503 Command refused, required Proxy negotiation failed
+QUIT
+221 mail.example.net closing connection
+
+
+DSN Support
+--------------------------------------------------------------
+
+DSN Support tries to add RFC 3461 support to Exim. It adds support for
+*) the additional parameters for MAIL FROM and RCPT TO
+*) RFC complient MIME DSN messages for all of
+ success, failure and delay notifications
+*) dsn_advertise_hosts main option to select which hosts are able
+ to use the extension
+*) dsn_lasthop router switch to end DSN processing
+
+In case of failure reports this means that the last three parts, the message body
+intro, size info and final text, of the defined template are ignored since there is no
+logical place to put them in the MIME message.
+
+All the other changes are made without changing any defaults
+
+Building exim:
+--------------
+
+Define
+EXPERIMENTAL_DSN=YES
+in your Local/Makefile.
+
+Configuration:
+--------------
+All DSNs are sent in MIME format if you built exim with EXPERIMENTAL_DSN=YES
+No option needed to activate it, and no way to turn it off.
+
+Failure and delay DSNs are triggered as usual except a sender used NOTIFY=...
+to prevent them.
+
+Support for Success DSNs is added and activated by NOTIFY=SUCCESS by clients.
+
+Add
+dsn_advertise_hosts = *
+or a more restrictive host_list to announce DSN in EHLO answers
+
+Those hosts can then use NOTIFY,ENVID,RET,ORCPT options.
+
+If a message is relayed to a DSN aware host without changing the envelope
+recipient the options are passed along and no success DSN is generated.
+
+A redirect router will always trigger a success DSN if requested and the DSN
+options are not passed any further.
+
+A success DSN always contains the recipient address as submitted by the
+client as required by RFC. Rewritten addresses are never exposed.
+
+If you used DSN patch up to 1.3 before remove all "dsn_process" switches from
+your routers since you don't need them anymore. There is no way to "gag"
+success DSNs anymore. Announcing DSN means answering as requested.
+
+You can prevent Exim from passing DSN options along to other DSN aware hosts by defining
+dsn_lasthop
+in a router. Exim will then send the success DSN himself if requested as if
+the next hop does not support DSN.
+Adding it to a redirect router makes no difference.
+
+
+Certificate name checking
+--------------------------------------------------------------
+The X509 certificates used for TLS are supposed be verified
+that they are owned by the expected host. The coding of TLS
+support to date has not made these checks.
+
+If built with EXPERIMENTAL_CERTNAMES defined, code is
+included to do so, and a new smtp transport option
+"tls_verify_cert_hostname" supported which takes a list of
+names for which the checks must be made. The host must
+also be in "tls_verify_hosts".
+
+Both Subject and Subject-Alternate-Name certificate fields
+are supported, as are wildcard certificates (limited to
+a single wildcard being the initial component of a 3-or-more
+component FQDN).
+
+
+DANE
+------------------------------------------------------------
+DNS-based Authentication of Named Entities, as applied
+to SMTP over TLS, provides assurance to a client that
+it is actually talking to the server it wants to rather
+than some attacker operating a Man In The Middle (MITM)
+operation. The latter can terminate the TLS connection
+you make, and make another one to the server (so both
+you and the server still think you have an encrypted
+connection) and, if one of the "well known" set of
+Certificate Authorities has been suborned - something
+which *has* been seen already (2014), a verifiable
+certificate (if you're using normal root CAs, eg. the
+Mozilla set, as your trust anchors).
+
+What DANE does is replace the CAs with the DNS as the
+trust anchor. The assurance is limited to a) the possibility
+that the DNS has been suborned, b) mistakes made by the
+admins of the target server. The attack surface presented
+by (a) is thought to be smaller than that of the set
+of root CAs.
+
+DANE scales better than having to maintain (and
+side-channel communicate) copies of server certificates
+for every possible target server. It also scales
+(slightly) better than having to maintain on an SMTP
+client a copy of the standard CAs bundle. It also
+means not having to pay a CA for certificates.
+
+DANE requires a server operator to do three things:
+1) run DNSSEC. This provides assurance to clients
+that DNS lookups they do for the server have not
+been tampered with. The domain MX record applying
+to this server, its A record, its TLSA record and
+any associated CNAME records must all be covered by
+DNSSEC.
+2) add TLSA DNS records. These say what the server
+certificate for a TLS connection should be.
+3) offer a server certificate, or certificate chain,
+in TLS connections which is traceable to the one
+defined by (one of?) the TSLA records
+
+There are no changes to Exim specific to server-side
+operation of DANE.
+
+The TLSA record for the server may have "certificate
+usage" of DANE_TA(2) or DANE_EE(3). The latter specifies
+the End Entity directly, i.e. the certificate involved
+is that of the server (and should be the sole one transmitted
+during the TLS handshake); this is appropriate for a
+single system, using a self-signed certificate.
+ DANE_TA usage is effectively declaring a specific CA
+to be used; this might be a private CA or a public,
+well-known one. A private CA at simplest is just
+a self-signed certificate which is used to sign
+cerver certificates, but running one securely does
+require careful arrangement. If a private CA is used
+then either all clients must be primed with it, or
+(probably simpler) the server TLS handshake must transmit
+the entire certificate chain from CA to server-certificate.
+If a public CA is used then all clients must be primed with it
+(losing one advantage of DANE) - but the attack surface is
+reduced from all public CAs to that single CA.
+DANE_TA is commonly used for several services and/or
+servers, each having a TLSA query-domain CNAME record,
+all of which point to a single TLSA record.
+
+The TLSA record should have a Selector field of SPKI(1)
+and a Matching Type field of SHA2-512(2).
+
+At the time of writing, https://www.huque.com/bin/gen_tlsa
+is useful for quickly generating TLSA records; and commands like
+
+ openssl x509 -in -pubkey -noout <certificate.pem \
+ | openssl rsa -outform der -pubin 2>/dev/null \
+ | openssl sha512 \
+ | awk '{print $2}'
+
+are workable for 4th-field hashes.
+
+For use with the DANE_TA model, server certificates
+must have a correct name (SubjectName or SubjectAltName).
+
+The use of OCSP-stapling should be considered, allowing
+for fast revocation of certificates (which would otherwise
+be limited by the DNS TTL on the TLSA records). However,
+this is likely to only be usable with DANE_TA. NOTE: the
+default of requesting OCSP for all hosts is modified iff
+DANE is in use, to:
+
+ hosts_request_ocsp = ${if or { {= {0}{$tls_out_tlsa_usage}} \
+ {= {4}{$tls_out_tlsa_usage}} } \
+ {*}{}}
+
+The (new) variable $tls_out_tlsa_usage is a bitfield with
+numbered bits set for TLSA record usage codes.
+The zero above means DANE was not in use,
+the four means that only DANE_TA usage TLSA records were
+found. If the definition of hosts_require_ocsp or
+hosts_request_ocsp includes the string "tls_out_tlsa_usage",
+they are re-expanded in time to control the OCSP request.
+
+This modification of hosts_request_ocsp is only done if
+it has the default value of "*".
+
+
+For client-side DANE there are two new smtp transport options,
+hosts_try_dane and hosts_require_dane. They do the obvious thing.
+[ should they be domain-based rather than host-based? ]
+
+DANE will only be usable if the target host has DNSSEC-secured
+MX, A and TLSA records.
+
+(TODO: specify when fallback happens vs. when the host is not used)
+
+If dane is in use the following transport options are ignored:
+ tls_verify_hosts
+ tls_try_verify_hosts
+ tls_verify_certificates
+ tls_crl
+ tls_verify_cert_hostnames
+
+Currently dnssec_request_domains must be active (need to think about that)
+and dnssec_require_domains is ignored.
+
+If verification was successful using DANE then the "CV" item
+in the delivery log line will show as "CV=dane".
+
+There is a new variable $tls_out_dane which will have "yes" if
+verification succeeded using DANE and "no" otherwise (only useful
+in combination with EXPERIMENTAL_TPDA), and a new variable
+$tls_out_tlsa_usage (detailed above).
+
+
--------------------------------------------------------------
End of file
--------------------------------------------------------------
git://git.exim.org / exim.git / blobdiff