+.section "Signing outgoing messages" "SECDKIMSIGN"
+.cindex "DKIM" "signing"
+
+For signing to be usable you must have published a DKIM record in DNS.
+Note that RFC 8301 (which does not cover EC keys) says:
+.code
+rsa-sha1 MUST NOT be used for signing or verifying.
+
+Signers MUST use RSA keys of at least 1024 bits for all keys.
+Signers SHOULD use RSA keys of at least 2048 bits.
+.endd
+
+Note also that the key content (the 'p=' field)
+in the DNS record is different between RSA and EC keys;
+for the former it is the base64 of the ASN.1 for the RSA public key
+(equivalent to the private-key .pem with the header/trailer stripped)
+but for EC keys it is the base64 of the pure key; no ASN.1 wrapping.
+
+Signing is enabled by setting private options on the SMTP transport.
+These options take (expandable) strings as arguments.
+
+.option dkim_domain smtp string list&!! unset
+The domain(s) you want to sign with.
+After expansion, this can be a list.
+Each element in turn,
+.new
+lowercased,
+.wen
+is put into the &%$dkim_domain%& expansion variable
+while expanding the remaining signing options.
+If it is empty after expansion, DKIM signing is not done,
+and no error will result even if &%dkim_strict%& is set.
+
+.option dkim_selector smtp string list&!! unset
+This sets the key selector string.
+After expansion, which can use &$dkim_domain$&, this can be a list.
+Each element in turn is put in the expansion
+variable &%$dkim_selector%& which may be used in the &%dkim_private_key%&
+option along with &%$dkim_domain%&.
+If the option is empty after expansion, DKIM signing is not done for this domain,
+and no error will result even if &%dkim_strict%& is set.
+
+.option dkim_private_key smtp string&!! unset
+This sets the private key to use.
+You can use the &%$dkim_domain%& and
+&%$dkim_selector%& expansion variables to determine the private key to use.
+The result can either
+.ilist
+be a valid RSA private key in ASCII armor (.pem file), including line breaks
+.next
+with GnuTLS 3.6.0 or OpenSSL 1.1.1 or later,
+be a valid Ed25519 private key (same format as above)
+.next
+start with a slash, in which case it is treated as a file that contains
+the private key
+.next
+be "0", "false" or the empty string, in which case the message will not
+be signed. This case will not result in an error, even if &%dkim_strict%&
+is set.
+.endlist
+
+To generate keys under OpenSSL:
+.code
+openssl genrsa -out dkim_rsa.private 2048
+openssl rsa -in dkim_rsa.private -out /dev/stdout -pubout -outform PEM
+.endd
+Take the base-64 lines from the output of the second command, concatenated,
+for the DNS TXT record.
+See section 3.6 of RFC6376 for the record specification.
+
+Under GnuTLS:
+.code
+certtool --generate-privkey --rsa --bits=2048 --password='' -8 --outfile=dkim_rsa.private
+certtool --load-privkey=dkim_rsa.private --pubkey-info
+.endd
+
+Note that RFC 8301 says:
+.code
+Signers MUST use RSA keys of at least 1024 bits for all keys.
+Signers SHOULD use RSA keys of at least 2048 bits.
+.endd
+
+.new
+EC keys for DKIM are defined by RFC 8463.
+.wen
+They are considerably smaller than RSA keys for equivalent protection.
+As they are a recent development, users should consider dual-signing
+(by setting a list of selectors, and an expansion for this option)
+for some transition period.
+The "_CRYPTO_SIGN_ED25519" macro will be defined if support is present
+for EC keys.
+
+OpenSSL 1.1.1 and GnuTLS 3.6.0 can create Ed25519 private keys:
+.code
+openssl genpkey -algorithm ed25519 -out dkim_ed25519.private
+certtool --generate-privkey --key-type=ed25519 --outfile=dkim_ed25519.private
+.endd
+
+To produce the required public key value for a DNS record:
+.code
+openssl pkey -outform DER -pubout -in dkim_ed25519.private | tail -c +13 | base64
+certtool --load_privkey=dkim_ed25519.private --pubkey_info --outder | tail -c +13 | base64
+.endd
+
+.new
+Exim also supports an alternate format
+of Ed25519 keys in DNS which was a candidate during development
+of the standard, but not adopted.
+A future release will probably drop that support.
+.wen
+
+.option dkim_hash smtp string&!! sha256
+Can be set to any one of the supported hash methods, which are:
+.ilist
+&`sha1`& &-- should not be used, is old and insecure
+.next
+&`sha256`& &-- the default
+.next
+&`sha512`& &-- possibly more secure but less well supported
+.endlist
+
+Note that RFC 8301 says:
+.code
+rsa-sha1 MUST NOT be used for signing or verifying.
+.endd
+
+.option dkim_identity smtp string&!! unset
+If set after expansion, the value is used to set an "i=" tag in
+the signing header. The DKIM standards restrict the permissible
+syntax of this optional tag to a mail address, with possibly-empty
+local part, an @, and a domain identical to or subdomain of the "d="
+tag value. Note that Exim does not check the value.
+
+.option dkim_canon smtp string&!! unset
+This option sets the canonicalization method used when signing a message.
+The DKIM RFC currently supports two methods: "simple" and "relaxed".
+The option defaults to "relaxed" when unset. Note: the current implementation
+only supports signing with the same canonicalization method for both headers and body.
+
+.option dkim_strict smtp string&!! unset
+This option defines how Exim behaves when signing a message that
+should be signed fails for some reason. When the expansion evaluates to
+either "1" or "true", Exim will defer. Otherwise Exim will send the message
+unsigned. You can use the &%$dkim_domain%& and &%$dkim_selector%& expansion
+variables here.
+
+.option dkim_sign_headers smtp string&!! "see below"
+If set, this option must expand to a colon-separated
+list of header names.
+Headers with these names, or the absence or such a header, will be included
+in the message signature.
+When unspecified, the header names listed in RFC4871 will be used,
+whether or not each header is present in the message.
+The default list is available for the expansion in the macro
+"_DKIM_SIGN_HEADERS".
+
+If a name is repeated, multiple headers by that name (or the absence thereof)
+will be signed. The textually later headers in the headers part of the
+message are signed first, if there are multiples.
+
+A name can be prefixed with either an '=' or a '+' character.
+If an '=' prefix is used, all headers that are present with this name
+will be signed.
+If a '+' prefix if used, all headers that are present with this name
+will be signed, and one signature added for a missing header with the
+name will be appended.
+
+.option dkim_timestamps smtp integer&!! unset
+This option controls the inclusion of timestamp information in the signature.
+If not set, no such information will be included.
+Otherwise, must be an unsigned number giving an offset in seconds from the current time
+for the expiry tag
+(eg. 1209600 for two weeks);
+both creation (t=) and expiry (x=) tags will be included.
+
+RFC 6376 lists these tags as RECOMMENDED.
+
+
+.section "Verifying DKIM signatures in incoming mail" "SECDKIMVFY"
+.cindex "DKIM" "verification"
+
+Verification of DKIM signatures in SMTP incoming email is done for all
+messages for which an ACL control &%dkim_disable_verify%& has not been set.
+.cindex authentication "expansion item"
+Performing verification sets up information used by the
+&$authresults$& expansion item.
+
+The results of that verification are then made available to the
+&%acl_smtp_dkim%& ACL, which can examine and modify them.
+By default, this ACL is called once for each
+syntactically(!) correct signature in the incoming message.
+A missing ACL definition defaults to accept.
+If any ACL call does not accept, the message is not accepted.
+If a cutthrough delivery was in progress for the message, that is
+summarily dropped (having wasted the transmission effort).
+
+To evaluate the verification result in the ACL
+a large number of expansion variables
+containing the signature status and its details are set up during the
+runtime of the ACL.
+
+Calling the ACL only for existing signatures is not sufficient to build
+more advanced policies. For that reason, the global option
+&%dkim_verify_signers%&, and a global expansion variable
+&%$dkim_signers%& exist.
+
+The global option &%dkim_verify_signers%& can be set to a colon-separated
+list of DKIM domains or identities for which the ACL &%acl_smtp_dkim%& is
+called. It is expanded when the message has been received. At this point,
+the expansion variable &%$dkim_signers%& already contains a colon-separated
+list of signer domains and identities for the message. When
+&%dkim_verify_signers%& is not specified in the main configuration,
+it defaults as:
+.code
+dkim_verify_signers = $dkim_signers
+.endd
+This leads to the default behaviour of calling &%acl_smtp_dkim%& for each
+DKIM signature in the message. Current DKIM verifiers may want to explicitly
+call the ACL for known domains or identities. This would be achieved as follows:
+.code
+dkim_verify_signers = paypal.com:ebay.com:$dkim_signers
+.endd
+This would result in &%acl_smtp_dkim%& always being called for "paypal.com"
+and "ebay.com", plus all domains and identities that have signatures in the message.
+You can also be more creative in constructing your policy. For example:
+.code
+dkim_verify_signers = $sender_address_domain:$dkim_signers
+.endd
+
+If a domain or identity is listed several times in the (expanded) value of
+&%dkim_verify_signers%&, the ACL is only called once for that domain or identity.
+
+.new
+Note that if the option is set using untrustworthy data
+(such as the From: header)
+care should be taken to force lowercase for domains
+and for the domain part if identities.
+The default setting can be regarded as trustworthy in this respect.
+.wen
+
+If multiple signatures match a domain (or identity), the ACL is called once
+for each matching signature.
+
+
+Inside the &%acl_smtp_dkim%&, the following expansion variables are
+available (from most to least important):
+
+
+.vlist
+.vitem &%$dkim_cur_signer%&
+The signer that is being evaluated in this ACL run. This can be a domain or
+an identity. This is one of the list items from the expanded main option
+&%dkim_verify_signers%& (see above).
+
+.vitem &%$dkim_verify_status%&
+Within the DKIM ACL,
+a string describing the general status of the signature. One of
+.ilist
+&%none%&: There is no signature in the message for the current domain or
+identity (as reflected by &%$dkim_cur_signer%&).
+.next
+&%invalid%&: The signature could not be verified due to a processing error.
+More detail is available in &%$dkim_verify_reason%&.
+.next
+&%fail%&: Verification of the signature failed. More detail is
+available in &%$dkim_verify_reason%&.
+.next
+&%pass%&: The signature passed verification. It is valid.
+.endlist
+
+This variable can be overwritten using an ACL 'set' modifier.
+This might, for instance, be done to enforce a policy restriction on
+hash-method or key-size:
+.code
+ warn condition = ${if eq {$dkim_verify_status}{pass}}
+ condition = ${if eq {${length_3:$dkim_algo}}{rsa}}
+ condition = ${if or {{eq {$dkim_algo}{rsa-sha1}} \
+ {< {$dkim_key_length}{1024}}}}
+ logwrite = NOTE: forcing DKIM verify fail (was pass)
+ set dkim_verify_status = fail
+ set dkim_verify_reason = hash too weak or key too short
+.endd
+
+So long as a DKIM ACL is defined (it need do no more than accept),
+after all the DKIM ACL runs have completed, the value becomes a
+colon-separated list of the values after each run.
+This is maintained for the mime, prdr and data ACLs.
+
+.vitem &%$dkim_verify_reason%&
+A string giving a little bit more detail when &%$dkim_verify_status%& is either
+"fail" or "invalid". One of
+.ilist
+&%pubkey_unavailable%& (when &%$dkim_verify_status%&="invalid"): The public
+key for the domain could not be retrieved. This may be a temporary problem.
+.next
+&%pubkey_syntax%& (when &%$dkim_verify_status%&="invalid"): The public key
+record for the domain is syntactically invalid.
+.next
+&%bodyhash_mismatch%& (when &%$dkim_verify_status%&="fail"): The calculated
+body hash does not match the one specified in the signature header. This
+means that the message body was modified in transit.
+.next
+&%signature_incorrect%& (when &%$dkim_verify_status%&="fail"): The signature
+could not be verified. This may mean that headers were modified,
+re-written or otherwise changed in a way which is incompatible with
+DKIM verification. It may of course also mean that the signature is forged.
+.endlist
+
+This variable can be overwritten, with any value, using an ACL 'set' modifier.
+
+.vitem &%$dkim_domain%&
+The signing domain. IMPORTANT: This variable is only populated if there is
+an actual signature in the message for the current domain or identity (as
+reflected by &%$dkim_cur_signer%&).
+
+.vitem &%$dkim_identity%&
+The signing identity, if present. IMPORTANT: This variable is only populated
+if there is an actual signature in the message for the current domain or
+identity (as reflected by &%$dkim_cur_signer%&).
+
+.vitem &%$dkim_selector%&
+The key record selector string.
+
+.vitem &%$dkim_algo%&
+The algorithm used. One of 'rsa-sha1' or 'rsa-sha256'.
+If running under GnuTLS 3.6.0 or OpenSSL 1.1.1 or later,
+may also be 'ed25519-sha256'.
+The "_CRYPTO_SIGN_ED25519" macro will be defined if support is present
+for EC keys.
+
+Note that RFC 8301 says:
+.code
+rsa-sha1 MUST NOT be used for signing or verifying.
+
+DKIM signatures identified as having been signed with historic
+algorithms (currently, rsa-sha1) have permanently failed evaluation
+.endd
+
+To enforce this you must have a DKIM ACL which checks this variable
+and overwrites the &$dkim_verify_status$& variable as discussed above.
+
+.vitem &%$dkim_canon_body%&
+The body canonicalization method. One of 'relaxed' or 'simple'.
+
+.vitem &%$dkim_canon_headers%&
+The header canonicalization method. One of 'relaxed' or 'simple'.
+
+.vitem &%$dkim_copiedheaders%&
+A transcript of headers and their values which are included in the signature
+(copied from the 'z=' tag of the signature).
+Note that RFC6376 requires that verification fail if the From: header is
+not included in the signature. Exim does not enforce this; sites wishing
+strict enforcement should code the check explicitly.
+
+.vitem &%$dkim_bodylength%&
+The number of signed body bytes. If zero ("0"), the body is unsigned. If no
+limit was set by the signer, "9999999999999" is returned. This makes sure
+that this variable always expands to an integer value.
+&*Note:*& The presence of the signature tag specifying a signing body length
+is one possible route to spoofing of valid DKIM signatures.
+A paranoid implementation might wish to regard signature where this variable
+shows less than the "no limit" return as being invalid.
+
+.vitem &%$dkim_created%&
+UNIX timestamp reflecting the date and time when the signature was created.
+When this was not specified by the signer, "0" is returned.
+
+.vitem &%$dkim_expires%&
+UNIX timestamp reflecting the date and time when the signer wants the
+signature to be treated as "expired". When this was not specified by the
+signer, "9999999999999" is returned. This makes it possible to do useful
+integer size comparisons against this value.
+Note that Exim does not check this value.
+
+.vitem &%$dkim_headernames%&
+A colon-separated list of names of headers included in the signature.
+
+.vitem &%$dkim_key_testing%&
+"1" if the key record has the "testing" flag set, "0" if not.
+
+.vitem &%$dkim_key_nosubdomains%&
+"1" if the key record forbids subdomaining, "0" otherwise.
+
+.vitem &%$dkim_key_srvtype%&
+Service type (tag s=) from the key record. Defaults to "*" if not specified
+in the key record.
+
+.vitem &%$dkim_key_granularity%&
+Key granularity (tag g=) from the key record. Defaults to "*" if not specified
+in the key record.
+
+.vitem &%$dkim_key_notes%&
+Notes from the key record (tag n=).
+
+.vitem &%$dkim_key_length%&
+Number of bits in the key.
+
+Note that RFC 8301 says:
+.code
+Verifiers MUST NOT consider signatures using RSA keys of
+less than 1024 bits as valid signatures.
+.endd
+
+To enforce this you must have a DKIM ACL which checks this variable
+and overwrites the &$dkim_verify_status$& variable as discussed above.
+As EC keys are much smaller, the check should only do this for RSA keys.
+
+.endlist
+
+In addition, two ACL conditions are provided:
+
+.vlist
+.vitem &%dkim_signers%&
+ACL condition that checks a colon-separated list of domains or identities
+for a match against the domain or identity that the ACL is currently verifying
+(reflected by &%$dkim_cur_signer%&). This is typically used to restrict an ACL
+verb to a group of domains or identities. For example:
+
+.code
+# Warn when Mail purportedly from GMail has no gmail signature
+warn log_message = GMail sender without gmail.com DKIM signature
+ sender_domains = gmail.com
+ dkim_signers = gmail.com
+ dkim_status = none
+.endd
+
+Note that the above does not check for a total lack of DKIM signing;
+for that check for empty &$h_DKIM-Signature:$& in the data ACL.
+
+.vitem &%dkim_status%&
+ACL condition that checks a colon-separated list of possible DKIM verification
+results against the actual result of verification. This is typically used
+to restrict an ACL verb to a list of verification outcomes, for example:
+
+.code
+deny message = Mail from Paypal with invalid/missing signature
+ sender_domains = paypal.com:paypal.de
+ dkim_signers = paypal.com:paypal.de
+ dkim_status = none:invalid:fail
+.endd
+
+The possible status keywords are: 'none','invalid','fail' and 'pass'. Please
+see the documentation of the &%$dkim_verify_status%& expansion variable above
+for more information of what they mean.
+.endlist
+
+
+
+
+.section "SPF (Sender Policy Framework)" SECSPF
+.cindex SPF verification
+
+SPF is a mechanism whereby a domain may assert which IP addresses may transmit
+messages with its domain in the envelope from, documented by RFC 7208.
+For more information on SPF see &url(http://www.openspf.org).
+. --- 2018-09-07: still not https
+
+Messages sent by a system not authorised will fail checking of such assertions.
+This includes retransmissions done by traditional forwarders.
+
+SPF verification support is built into Exim if SUPPORT_SPF=yes is set in
+&_Local/Makefile_&. The support uses the &_libspf2_& library
+&url(https://www.libspf2.org/).
+There is no Exim involvement in the transmission of messages;
+publishing certain DNS records is all that is required.
+
+For verification, an ACL condition and an expansion lookup are provided.
+.cindex authentication "expansion item"
+Performing verification sets up information used by the
+&$authresults$& expansion item.
+
+
+.cindex SPF "ACL condition"
+.cindex ACL "spf condition"
+The ACL condition "spf" can be used at or after the MAIL ACL.
+It takes as an argument a list of strings giving the outcome of the SPF check,
+and will succeed for any matching outcome.
+Valid strings are:
+.vlist
+.vitem &%pass%&
+The SPF check passed, the sending host is positively verified by SPF.
+
+.vitem &%fail%&
+The SPF check failed, the sending host is NOT allowed to send mail for the
+domain in the envelope-from address.
+
+.vitem &%softfail%&
+The SPF check failed, but the queried domain can't absolutely confirm that this
+is a forgery.
+
+.vitem &%none%&
+The queried domain does not publish SPF records.
+
+.vitem &%neutral%&
+The SPF check returned a "neutral" state. This means the queried domain has
+published a SPF record, but wants to allow outside servers to send mail under
+its domain as well. This should be treated like "none".
+
+.vitem &%permerror%&
+This indicates a syntax error in the SPF record of the queried domain.
+You may deny messages when this occurs.
+
+.vitem &%temperror%&
+This indicates a temporary error during all processing, including Exim's
+SPF processing. You may defer messages when this occurs.
+.endlist
+
+You can prefix each string with an exclamation mark to invert
+its meaning, for example "!fail" will match all results but
+"fail". The string list is evaluated left-to-right, in a
+short-circuit fashion.
+
+Example:
+.code
+deny spf = fail
+ message = $sender_host_address is not allowed to send mail from \
+ ${if def:sender_address_domain \
+ {$sender_address_domain}{$sender_helo_name}}. \
+ Please see http://www.openspf.org/Why?scope=\
+ ${if def:sender_address_domain {mfrom}{helo}};\
+ identity=${if def:sender_address_domain \
+ {$sender_address}{$sender_helo_name}};\
+ ip=$sender_host_address
+.endd
+
+When the spf condition has run, it sets up several expansion
+variables:
+
+.cindex SPF "verification variables"
+.vlist
+.vitem &$spf_header_comment$&
+.vindex &$spf_header_comment$&
+ This contains a human-readable string describing the outcome
+ of the SPF check. You can add it to a custom header or use
+ it for logging purposes.
+
+.vitem &$spf_received$&
+.vindex &$spf_received$&
+ This contains a complete Received-SPF: header that can be
+ added to the message. Please note that according to the SPF
+ draft, this header must be added at the top of the header
+ list. Please see section 10 on how you can do this.
+
+ Note: in case of "Best-guess" (see below), the convention is
+ to put this string in a header called X-SPF-Guess: instead.
+
+.vitem &$spf_result$&
+.vindex &$spf_result$&
+ This contains the outcome of the SPF check in string form,
+ one of pass, fail, softfail, none, neutral, permerror or
+ temperror.
+
+.vitem &$spf_result_guessed$&
+.vindex &$spf_result_guessed$&
+ This boolean is true only if a best-guess operation was used
+ and required in order to obtain a result.
+
+.vitem &$spf_smtp_comment$&
+.vindex &$spf_smtp_comment$&
+ This contains a string that can be used in a SMTP response
+ to the calling party. Useful for "fail".
+.endlist
+
+
+.cindex SPF "ACL condition"
+.cindex ACL "spf_guess condition"
+.cindex SPF "best guess"
+In addition to SPF, you can also perform checks for so-called
+"Best-guess". Strictly speaking, "Best-guess" is not standard
+SPF, but it is supported by the same framework that enables SPF
+capability.
+Refer to &url(http://www.openspf.org/FAQ/Best_guess_record)
+for a description of what it means.
+. --- 2018-09-07: still not https:
+
+To access this feature, simply use the spf_guess condition in place
+of the spf one. For example:
+
+.code
+deny spf_guess = fail
+ message = $sender_host_address doesn't look trustworthy to me
+.endd
+
+In case you decide to reject messages based on this check, you
+should note that although it uses the same framework, "Best-guess"
+is not SPF, and therefore you should not mention SPF at all in your
+reject message.
+
+When the spf_guess condition has run, it sets up the same expansion
+variables as when spf condition is run, described above.
+
+Additionally, since Best-guess is not standardized, you may redefine
+what "Best-guess" means to you by redefining the main configuration
+&%spf_guess%& option.
+For example, the following:
+
+.code
+spf_guess = v=spf1 a/16 mx/16 ptr ?all
+.endd
+
+would relax host matching rules to a broader network range.
+
+
+.cindex SPF "lookup expansion"
+.cindex lookup spf
+A lookup expansion is also available. It takes an email
+address as the key and an IP address as the database:
+
+.code
+ ${lookup {username@domain} spf {ip.ip.ip.ip}}
+.endd
+
+The lookup will return the same result strings as can appear in
+&$spf_result$& (pass,fail,softfail,neutral,none,err_perm,err_temp).
+Currently, only IPv4 addresses are supported.
+
+
+
+
+. ////////////////////////////////////////////////////////////////////////////
+. ////////////////////////////////////////////////////////////////////////////
+
+.chapter "Proxies" "CHAPproxies" &&&
+ "Proxy support"
+.cindex "proxy support"
+.cindex "proxy" "access via"
+
+A proxy is an intermediate system through which communication is passed.
+Proxies may provide a security, availability or load-distribution function.
+
+
+.section "Inbound proxies" SECTproxyInbound
+.cindex proxy inbound
+.cindex proxy "server side"
+.cindex proxy "Proxy protocol"
+.cindex "Proxy protocol" proxy
+
+Exim has support for receiving inbound SMTP connections via a proxy
+that uses &"Proxy Protocol"& to speak to it.
+To include this support, include &"SUPPORT_PROXY=yes"&
+in Local/Makefile.
+
+It was built on the HAProxy specification, found at
+&url(https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt).
+
+The purpose of this facility is so that an application load balancer,
+such as HAProxy, can sit in front of several Exim servers
+to distribute load.
+Exim uses the local protocol communication with the proxy to obtain
+the remote SMTP system IP address and port information.
+There is no logging if a host passes or
+fails Proxy Protocol negotiation, but it can easily be determined and
+recorded in an ACL (example is below).
+
+Use of a proxy is enabled by setting the &%hosts_proxy%&
+main configuration option to a hostlist; connections from these
+hosts will use Proxy Protocol.
+Exim supports both version 1 and version 2 of the Proxy Protocol and
+automatically determines which version is in use.
+
+The Proxy Protocol header is the first data received on a TCP connection
+and is inserted before any TLS-on-connect handshake from the client; Exim
+negotiates TLS between Exim-as-server and the remote client, not between
+Exim and the proxy server.
+
+The following expansion variables are usable
+(&"internal"& and &"external"& here refer to the interfaces
+of the proxy):
+.display
+&'proxy_external_address '& IP of host being proxied or IP of remote interface of proxy
+&'proxy_external_port '& Port of host being proxied or Port on remote interface of proxy
+&'proxy_local_address '& IP of proxy server inbound or IP of local interface of proxy
+&'proxy_local_port '& Port of proxy server inbound or Port on local interface of proxy
+&'proxy_session '& boolean: SMTP connection via proxy
+.endd
+If &$proxy_session$& is set but &$proxy_external_address$& is empty
+there was a protocol error.
+The variables &$sender_host_address$& and &$sender_host_port$&
+will have values for the actual client system, not the proxy.
+
+Since the real connections are all coming from the proxy, and the
+per host connection tracking is done before Proxy Protocol is
+evaluated, &%smtp_accept_max_per_host%& must be set high enough to
+handle all of the parallel volume you expect per inbound proxy.
+With the option set so high, you lose the ability
+to protect your server from many connections from one IP.
+In order to prevent your server from overload, you
+need to add a per connection ratelimit to your connect ACL.
+A possible solution is:
+.display
+ # Set max number of connections per host
+ LIMIT = 5
+ # Or do some kind of IP lookup in a flat file or database
+ # LIMIT = ${lookup{$sender_host_address}iplsearch{/etc/exim/proxy_limits}}
+
+ defer message = Too many connections from this IP right now
+ ratelimit = LIMIT / 5s / per_conn / strict
+.endd
+
+
+
+.section "Outbound proxies" SECTproxySOCKS
+.cindex proxy outbound
+.cindex proxy "client side"
+.cindex proxy SOCKS
+.cindex SOCKS proxy
+Exim has support for sending outbound SMTP via a proxy
+using a protocol called SOCKS5 (defined by RFC1928).
+The support can be optionally included by defining SUPPORT_SOCKS=yes in
+Local/Makefile.
+
+Use of a proxy is enabled by setting the &%socks_proxy%& option
+on an smtp transport.
+The option value is expanded and should then be a list
+(colon-separated by default) of proxy specifiers.
+Each proxy specifier is a list
+(space-separated by default) where the initial element
+is an IP address and any subsequent elements are options.
+
+Options are a string <name>=<value>.
+The list of options is in the following table:
+.display
+&'auth '& authentication method
+&'name '& authentication username
+&'pass '& authentication password
+&'port '& tcp port
+&'tmo '& connection timeout
+&'pri '& priority
+&'weight '& selection bias
+.endd
+
+More details on each of these options follows:
+
+.ilist
+.cindex authentication "to proxy"
+.cindex proxy authentication
+&%auth%&: Either &"none"& (default) or &"name"&.
+Using &"name"& selects username/password authentication per RFC 1929
+for access to the proxy.
+Default is &"none"&.
+.next
+&%name%&: sets the username for the &"name"& authentication method.
+Default is empty.
+.next
+&%pass%&: sets the password for the &"name"& authentication method.
+Default is empty.
+.next
+&%port%&: the TCP port number to use for the connection to the proxy.
+Default is 1080.
+.next
+&%tmo%&: sets a connection timeout in seconds for this proxy.
+Default is 5.
+.next
+&%pri%&: specifies a priority for the proxy within the list,
+higher values being tried first.
+The default priority is 1.
+.next
+&%weight%&: specifies a selection bias.
+Within a priority set servers are queried in a random fashion,
+weighted by this value.
+The default value for selection bias is 1.
+.endlist
+
+Proxies from the list are tried according to their priority
+and weight settings until one responds. The timeout for the
+overall connection applies to the set of proxied attempts.
+
+.section Logging SECTproxyLog
+To log the (local) IP of a proxy in the incoming or delivery logline,
+add &"+proxy"& to the &%log_selector%& option.
+This will add a component tagged with &"PRX="& to the line.
+
+. ////////////////////////////////////////////////////////////////////////////
+. ////////////////////////////////////////////////////////////////////////////
+
+.chapter "Internationalisation" "CHAPi18n" &&&
+ "Internationalisation""
+.cindex internationalisation "email address"
+.cindex EAI
+.cindex i18n
+.cindex utf8 "mail name handling"
+
+Exim has support for Internationalised mail names.
+To include this it must be built with SUPPORT_I18N and the libidn library.
+Standards supported are RFCs 2060, 5890, 6530 and 6533.
+
+If Exim is built with SUPPORT_I18N_2008 (in addition to SUPPORT_I18N, not
+instead of it) then IDNA2008 is supported; this adds an extra library
+requirement, upon libidn2.
+
+.section "MTA operations" SECTi18nMTA
+.cindex SMTPUTF8 "ESMTP option"
+The main configuration option &%smtputf8_advertise_hosts%& specifies
+a host list. If this matches the sending host and
+accept_8bitmime is true (the default) then the ESMTP option
+SMTPUTF8 will be advertised.
+
+If the sender specifies the SMTPUTF8 option on a MAIL command
+international handling for the message is enabled and
+the expansion variable &$message_smtputf8$& will have value TRUE.
+
+The option &%allow_utf8_domains%& is set to true for this
+message. All DNS lookups are converted to a-label form
+whatever the setting of &%allow_utf8_domains%&
+when Exim is built with SUPPORT_I18N.
+
+Both localparts and domain are maintained as the original
+UTF-8 form internally; any comparison or regular-expression use will
+require appropriate care. Filenames created, eg. by
+the appendfile transport, will have UTF-8 names.
+
+HELO names sent by the smtp transport will have any UTF-8
+components expanded to a-label form,
+and any certificate name checks will be done using the a-label
+form of the name.
+
+.cindex log protocol
+.cindex SMTPUTF8 logging
+.cindex i18n logging
+Log lines and Received-by: header lines will acquire a "utf8"
+prefix on the protocol element, eg. utf8esmtp.
+
+The following expansion operators can be used:
+.code
+${utf8_domain_to_alabel:str}
+${utf8_domain_from_alabel:str}
+${utf8_localpart_to_alabel:str}
+${utf8_localpart_from_alabel:str}
+.endd
+
+.cindex utf8 "address downconversion"
+.cindex i18n "utf8 address downconversion"
+The RCPT ACL
+may use the following modifier:
+.display
+control = utf8_downconvert
+control = utf8_downconvert/<value>
+.endd
+This sets a flag requiring that addresses are converted to
+a-label form before smtp delivery, for use in a
+Message Submission Agent context.
+If a value is appended it may be:
+.display
+&`1 `& (default) mandatory downconversion
+&`0 `& no downconversion
+&`-1 `& if SMTPUTF8 not supported by destination host
+.endd
+
+If mua_wrapper is set, the utf8_downconvert control
+is initially set to -1.
+
+The smtp transport has an option &%utf8_downconvert%&.
+If set it must expand to one of the three values described above,
+and it overrides any previously set value.
+
+
+There is no explicit support for VRFY and EXPN.
+Configurations supporting these should inspect
+&$smtp_command_argument$& for an SMTPUTF8 argument.
+
+There is no support for LMTP on Unix sockets.
+Using the "lmtp" protocol option on an smtp transport,
+for LMTP over TCP, should work as expected.
+
+There is no support for DSN unitext handling,
+and no provision for converting logging from or to UTF-8.
+
+
+
+.section "MDA operations" SECTi18nMDA
+To aid in constructing names suitable for IMAP folders
+the following expansion operator can be used:
+.code
+${imapfolder {<string>} {<sep>} {<specials>}}
+.endd
+
+The string is converted from the charset specified by
+the "headers charset" command (in a filter file)
+or &%headers_charset%& main configuration option (otherwise),
+to the
+modified UTF-7 encoding specified by RFC 2060,
+with the following exception: All occurrences of <sep>
+(which has to be a single character)
+are replaced with periods ("."), and all periods and slashes that are not
+<sep> and are not in the <specials> string are BASE64 encoded.
+
+The third argument can be omitted, defaulting to an empty string.
+The second argument can be omitted, defaulting to "/".
+
+This is the encoding used by Courier for Maildir names on disk, and followed
+by many other IMAP servers.
+
+Examples:
+.display
+&`${imapfolder {Foo/Bar}} `& yields &`Foo.Bar`&
+&`${imapfolder {Foo/Bar}{.}{/}} `& yields &`Foo&&AC8-Bar`&
+&`${imapfolder {Räksmörgås}} `& yields &`R&&AOQ-ksm&&APY-rg&&AOU-s`&
+.endd
+
+Note that the source charset setting is vital, and also that characters
+must be representable in UTF-16.
git://git.exim.org / exim.git / blobdiff