* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2014 */
+/* Copyright (c) University of Cambridge 1995 - 2018 */
/* See the file NOTICE for conditions of use and distribution. */
/* Copyright (c) Phil Pennock 2012 */
The code herein is a revamp of GnuTLS integration using the current APIs; the
original tls-gnu.c was based on a patch which was contributed by Nikos
-Mavroyanopoulos. The revamp is partially a rewrite, partially cut&paste as
+Mavrogiannopoulos. The revamp is partially a rewrite, partially cut&paste as
appropriate.
APIs current as of GnuTLS 2.12.18; note that the GnuTLS manual is for GnuTLS 3,
#include <gnutls/x509.h>
/* man-page is incorrect, gnutls_rnd() is not in gnutls.h: */
#include <gnutls/crypto.h>
+
/* needed to disable PKCS11 autoload unless requested */
#if GNUTLS_VERSION_NUMBER >= 0x020c00
# include <gnutls/pkcs11.h>
+# define SUPPORT_PARAM_TO_PK_BITS
#endif
#if GNUTLS_VERSION_NUMBER < 0x030103 && !defined(DISABLE_OCSP)
# warning "GnuTLS library version too old; define DISABLE_OCSP in Makefile"
# define DISABLE_OCSP
#endif
-#if GNUTLS_VERSION_NUMBER < 0x020a00 && defined(EXPERIMENTAL_EVENT)
+#if GNUTLS_VERSION_NUMBER < 0x020a00 && !defined(DISABLE_EVENT)
# warning "GnuTLS library version too old; tls:cert event unsupported"
-# undef EXPERIMENTAL_EVENT
+# define DISABLE_EVENT
#endif
#if GNUTLS_VERSION_NUMBER >= 0x030306
# define SUPPORT_CA_DIR
#else
# undef SUPPORT_CA_DIR
#endif
+#if GNUTLS_VERSION_NUMBER >= 0x030014
+# define SUPPORT_SYSDEFAULT_CABUNDLE
+#endif
+#if GNUTLS_VERSION_NUMBER >= 0x030104
+# define GNUTLS_CERT_VFY_STATUS_PRINT
+#endif
+#if GNUTLS_VERSION_NUMBER >= 0x030109
+# define SUPPORT_CORK
+#endif
+#if GNUTLS_VERSION_NUMBER >= 0x030506 && !defined(DISABLE_OCSP)
+# define SUPPORT_SRV_OCSP_STACK
+#endif
+
+#ifdef SUPPORT_DANE
+# if GNUTLS_VERSION_NUMBER >= 0x030000
+# define DANESSL_USAGE_DANE_TA 2
+# define DANESSL_USAGE_DANE_EE 3
+# else
+# error GnuTLS version too early for DANE
+# endif
+# if GNUTLS_VERSION_NUMBER < 0x999999
+# define GNUTLS_BROKEN_DANE_VALIDATION
+# endif
+#endif
#ifndef DISABLE_OCSP
# include <gnutls/ocsp.h>
#endif
+#ifdef SUPPORT_DANE
+# include <gnutls/dane.h>
+#endif
/* GnuTLS 2 vs 3
/* Values for verify_requirement */
enum peer_verify_requirement
- { VERIFY_NONE, VERIFY_OPTIONAL, VERIFY_REQUIRED };
+ { VERIFY_NONE, VERIFY_OPTIONAL, VERIFY_REQUIRED, VERIFY_DANE };
/* This holds most state for server or client; with this, we can set up an
outbound TLS-enabled connection in an ACL callout, while not stomping all
int fd_in;
int fd_out;
BOOL peer_cert_verified;
+ BOOL peer_dane_verified;
BOOL trigger_sni_changes;
BOOL have_set_peerdn;
- const struct host_item *host;
- gnutls_x509_crt_t peercert;
+ const struct host_item *host; /* NULL if server */
+ gnutls_x509_crt_t peercert;
uschar *peerdn;
uschar *ciphersuite;
uschar *received_sni;
uschar *exp_tls_verify_certificates;
uschar *exp_tls_crl;
uschar *exp_tls_require_ciphers;
- uschar *exp_tls_ocsp_file;
-#ifdef EXPERIMENTAL_CERTNAMES
- uschar *exp_tls_verify_cert_hostnames;
-#endif
-#ifdef EXPERIMENTAL_EVENT
+ const uschar *exp_tls_verify_cert_hostnames;
+#ifndef DISABLE_EVENT
uschar *event_action;
#endif
+#ifdef SUPPORT_DANE
+ char * const * dane_data;
+ const int * dane_data_len;
+#endif
tls_support *tlsp; /* set in tls_init() */
uschar *xfer_buffer;
int xfer_buffer_lwm;
int xfer_buffer_hwm;
- int xfer_eof;
- int xfer_error;
+ BOOL xfer_eof; /*XXX never gets set! */
+ BOOL xfer_error;
} exim_gnutls_state_st;
static const exim_gnutls_state_st exim_gnutls_state_init = {
- NULL, NULL, NULL, VERIFY_NONE, -1, -1, FALSE, FALSE, FALSE,
- NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-#ifdef EXPERIMENTAL_CERTNAMES
- NULL,
-#endif
-#ifdef EXPERIMENTAL_EVENT
- NULL,
+ .session = NULL,
+ .x509_cred = NULL,
+ .priority_cache = NULL,
+ .verify_requirement = VERIFY_NONE,
+ .fd_in = -1,
+ .fd_out = -1,
+ .peer_cert_verified = FALSE,
+ .peer_dane_verified = FALSE,
+ .trigger_sni_changes =FALSE,
+ .have_set_peerdn = FALSE,
+ .host = NULL,
+ .peercert = NULL,
+ .peerdn = NULL,
+ .ciphersuite = NULL,
+ .received_sni = NULL,
+
+ .tls_certificate = NULL,
+ .tls_privatekey = NULL,
+ .tls_sni = NULL,
+ .tls_verify_certificates = NULL,
+ .tls_crl = NULL,
+ .tls_require_ciphers =NULL,
+
+ .exp_tls_certificate = NULL,
+ .exp_tls_privatekey = NULL,
+ .exp_tls_verify_certificates = NULL,
+ .exp_tls_crl = NULL,
+ .exp_tls_require_ciphers = NULL,
+ .exp_tls_verify_cert_hostnames = NULL,
+#ifndef DISABLE_EVENT
+ .event_action = NULL,
#endif
- NULL,
- NULL, 0, 0, 0, 0,
+ .tlsp = NULL,
+
+ .xfer_buffer = NULL,
+ .xfer_buffer_lwm = 0,
+ .xfer_buffer_hwm = 0,
+ .xfer_eof = FALSE,
+ .xfer_error = FALSE,
};
/* Not only do we have our own APIs which don't pass around state, assuming
XXX But see gnutls_session_get_ptr()
*/
-static exim_gnutls_state_st state_server, state_client;
+static exim_gnutls_state_st state_server;
/* dh_params are initialised once within the lifetime of a process using TLS;
if we used TLS in a long-lived daemon, we'd have to reconsider this. But we
static const int ssl_session_timeout = 200;
-static const char * const exim_default_gnutls_priority = "NORMAL";
+static const uschar * const exim_default_gnutls_priority = US"NORMAL";
/* Guard library core initialisation */
static BOOL exim_gnutls_base_init_done = FALSE;
+#ifndef DISABLE_OCSP
+static BOOL gnutls_buggy_ocsp = FALSE;
+#endif
+
/* ------------------------------------------------------------------------ */
/* macros */
/* Set this to control gnutls_global_set_log_level(); values 0 to 9 will setup
the library logging; a value less than 0 disables the calls to set up logging
-callbacks. */
+callbacks. Possibly GNuTLS also looks for an environment variable
+"GNUTLS_DEBUG_LEVEL". */
#ifndef EXIM_GNUTLS_LIBRARY_LOG_LEVEL
# define EXIM_GNUTLS_LIBRARY_LOG_LEVEL -1
#endif
# define EXIM_SERVER_DH_BITS_PRE2_12 1024
#endif
-#define exim_gnutls_err_check(Label) do { \
- if (rc != GNUTLS_E_SUCCESS) { return tls_error((Label), gnutls_strerror(rc), host); } } while (0)
+#define exim_gnutls_err_check(rc, Label) do { \
+ if ((rc) != GNUTLS_E_SUCCESS) \
+ return tls_error((Label), US gnutls_strerror(rc), host, errstr); \
+ } while (0)
-#define expand_check_tlsvar(Varname) expand_check(state->Varname, US #Varname, &state->exp_##Varname)
+#define expand_check_tlsvar(Varname, errstr) \
+ expand_check(state->Varname, US #Varname, &state->exp_##Varname, errstr)
#if GNUTLS_VERSION_NUMBER >= 0x020c00
# define HAVE_GNUTLS_SESSION_CHANNEL_BINDING
usually obtained from gnutls_strerror()
host NULL if setting up a server;
the connected host if setting up a client
+ errstr pointer to returned error string
Returns: OK/DEFER/FAIL
*/
static int
-tls_error(const uschar *prefix, const char *msg, const host_item *host)
+tls_error(const uschar *prefix, const uschar *msg, const host_item *host,
+ uschar ** errstr)
{
-if (host)
- {
- log_write(0, LOG_MAIN, "H=%s [%s] TLS error on connection (%s)%s%s",
- host->name, host->address, prefix, msg ? ": " : "", msg ? msg : "");
- return FAIL;
- }
-else
- {
- uschar *conn_info = smtp_get_connection_info();
- if (Ustrncmp(conn_info, US"SMTP ", 5) == 0)
- conn_info += 5;
- /* I'd like to get separated H= here, but too hard for now */
- log_write(0, LOG_MAIN, "TLS error on %s (%s)%s%s",
- conn_info, prefix, msg ? ": " : "", msg ? msg : "");
- return DEFER;
- }
+if (errstr)
+ *errstr = string_sprintf("(%s)%s%s", prefix, msg ? ": " : "", msg ? msg : US"");
+return host ? FAIL : DEFER;
}
static void
record_io_error(exim_gnutls_state_st *state, int rc, uschar *when, uschar *text)
{
-const char *msg;
+const uschar * msg;
+uschar * errstr;
if (rc == GNUTLS_E_FATAL_ALERT_RECEIVED)
- msg = CS string_sprintf("%s: %s", US gnutls_strerror(rc),
+ msg = string_sprintf("%s: %s", US gnutls_strerror(rc),
US gnutls_alert_get_name(gnutls_alert_get(state->session)));
else
- msg = gnutls_strerror(rc);
+ msg = US gnutls_strerror(rc);
-tls_error(when, msg, state->host);
+(void) tls_error(when, msg, state->host, &errstr);
+
+if (state->host)
+ log_write(0, LOG_MAIN, "H=%s [%s] TLS error on connection %s",
+ state->host->name, state->host->address, errstr);
+else
+ {
+ uschar * conn_info = smtp_get_connection_info();
+ if (Ustrncmp(conn_info, US"SMTP ", 5) == 0) conn_info += 5;
+ /* I'd like to get separated H= here, but too hard for now */
+ log_write(0, LOG_MAIN, "TLS error on %s %s", conn_info, errstr);
+ }
}
} while (0)
static int
-import_cert(const gnutls_datum * cert, gnutls_x509_crt_t * crtp)
+import_cert(const gnutls_datum_t * cert, gnutls_x509_crt_t * crtp)
{
int rc;
#endif
tls_support * tlsp = state->tlsp;
-tlsp->active = state->fd_out;
+tlsp->active.sock = state->fd_out;
+tlsp->active.tls_ctx = state;
cipher = gnutls_cipher_get(state->session);
/* returns size in "bytes" */
DEBUG(D_tls) debug_printf("cipher: %s\n", state->ciphersuite);
tlsp->certificate_verified = state->peer_cert_verified;
+#ifdef SUPPORT_DANE
+tlsp->dane_verified = state->peer_dane_verified;
+#endif
/* note that tls_channelbinding_b64 is not saved to the spool file, since it's
only available for use for authenticators while this TLS session is running. */
} else {
old_pool = store_pool;
store_pool = POOL_PERM;
- tls_channelbinding_b64 = auth_b64encode(channel.data, (int)channel.size);
+ tls_channelbinding_b64 = b64encode(channel.data, (int)channel.size);
store_pool = old_pool;
DEBUG(D_tls) debug_printf("Have channel bindings cached for possible auth usage.\n");
}
/* record our certificate */
{
- const gnutls_datum * cert = gnutls_certificate_get_ours(state->session);
+ const gnutls_datum_t * cert = gnutls_certificate_get_ours(state->session);
gnutls_x509_crt_t crt;
tlsp->ourcert = cert && import_cert(cert, &crt)==0 ? crt : NULL;
*/
static int
-init_server_dh(void)
+init_server_dh(uschar ** errstr)
{
int fd, rc;
unsigned int dh_bits;
-gnutls_datum m;
+gnutls_datum_t m;
uschar filename_buf[PATH_MAX];
uschar *filename = NULL;
size_t sz;
DEBUG(D_tls) debug_printf("Initialising GnuTLS server params.\n");
rc = gnutls_dh_params_init(&dh_server_params);
-exim_gnutls_err_check(US"gnutls_dh_params_init");
+exim_gnutls_err_check(rc, US"gnutls_dh_params_init");
m.data = NULL;
m.size = 0;
-if (!expand_check(tls_dhparam, US"tls_dhparam", &exp_tls_dhparam))
+if (!expand_check(tls_dhparam, US"tls_dhparam", &exp_tls_dhparam, errstr))
return DEFER;
if (!exp_tls_dhparam)
}
else if (exp_tls_dhparam[0] != '/')
{
- m.data = US std_dh_prime_named(exp_tls_dhparam);
- if (m.data == NULL)
- return tls_error(US"No standard prime named", CS exp_tls_dhparam, NULL);
+ if (!(m.data = US std_dh_prime_named(exp_tls_dhparam)))
+ return tls_error(US"No standard prime named", exp_tls_dhparam, NULL, errstr);
m.size = Ustrlen(m.data);
}
else
if (m.data)
{
rc = gnutls_dh_params_import_pkcs3(dh_server_params, &m, GNUTLS_X509_FMT_PEM);
- exim_gnutls_err_check(US"gnutls_dh_params_import_pkcs3");
+ exim_gnutls_err_check(rc, US"gnutls_dh_params_import_pkcs3");
DEBUG(D_tls) debug_printf("Loaded fixed standard D-H parameters\n");
return OK;
}
different filename and ensure we have sufficient bits. */
dh_bits = gnutls_sec_param_to_pk_bits(GNUTLS_PK_DH, GNUTLS_SEC_PARAM_NORMAL);
if (!dh_bits)
- return tls_error(US"gnutls_sec_param_to_pk_bits() failed", NULL, NULL);
+ return tls_error(US"gnutls_sec_param_to_pk_bits() failed", NULL, NULL, errstr);
DEBUG(D_tls)
debug_printf("GnuTLS tells us that for D-H PK, NORMAL is %d bits.\n",
dh_bits);
{
if (!string_format(filename_buf, sizeof(filename_buf),
"%s/gnutls-params-%d", spool_directory, dh_bits))
- return tls_error(US"overlong filename", NULL, NULL);
+ return tls_error(US"overlong filename", NULL, NULL, errstr);
filename = filename_buf;
}
/* Open the cache file for reading and if successful, read it and set up the
parameters. */
-fd = Uopen(filename, O_RDONLY, 0);
-if (fd >= 0)
+if ((fd = Uopen(filename, O_RDONLY, 0)) >= 0)
{
struct stat statbuf;
FILE *fp;
{
saved_errno = errno;
(void)close(fd);
- return tls_error(US"TLS cache stat failed", strerror(saved_errno), NULL);
+ return tls_error(US"TLS cache stat failed", US strerror(saved_errno), NULL, errstr);
}
if (!S_ISREG(statbuf.st_mode))
{
(void)close(fd);
- return tls_error(US"TLS cache not a file", NULL, NULL);
+ return tls_error(US"TLS cache not a file", NULL, NULL, errstr);
}
- fp = fdopen(fd, "rb");
- if (!fp)
+ if (!(fp = fdopen(fd, "rb")))
{
saved_errno = errno;
(void)close(fd);
return tls_error(US"fdopen(TLS cache stat fd) failed",
- strerror(saved_errno), NULL);
+ US strerror(saved_errno), NULL, errstr);
}
m.size = statbuf.st_size;
- m.data = malloc(m.size);
- if (m.data == NULL)
+ if (!(m.data = malloc(m.size)))
{
fclose(fp);
- return tls_error(US"malloc failed", strerror(errno), NULL);
+ return tls_error(US"malloc failed", US strerror(errno), NULL, errstr);
}
- sz = fread(m.data, m.size, 1, fp);
- if (!sz)
+ if (!(sz = fread(m.data, m.size, 1, fp)))
{
saved_errno = errno;
fclose(fp);
free(m.data);
- return tls_error(US"fread failed", strerror(saved_errno), NULL);
+ return tls_error(US"fread failed", US strerror(saved_errno), NULL, errstr);
}
fclose(fp);
rc = gnutls_dh_params_import_pkcs3(dh_server_params, &m, GNUTLS_X509_FMT_PEM);
free(m.data);
- exim_gnutls_err_check(US"gnutls_dh_params_import_pkcs3");
+ exim_gnutls_err_check(rc, US"gnutls_dh_params_import_pkcs3");
DEBUG(D_tls) debug_printf("read D-H parameters from file \"%s\"\n", filename);
}
}
else
return tls_error(string_open_failed(errno, "\"%s\" for reading", filename),
- NULL, NULL);
+ NULL, NULL, errstr);
/* If ret < 0, either the cache file does not exist, or the data it contains
is not useful. One particular case of this is when upgrading from an older
if ((PATH_MAX - Ustrlen(filename)) < 10)
return tls_error(US"Filename too long to generate replacement",
- CS filename, NULL);
+ filename, NULL, errstr);
- temp_fn = string_copy(US "%s.XXXXXXX");
- fd = mkstemp(CS temp_fn); /* modifies temp_fn */
- if (fd < 0)
- return tls_error(US"Unable to open temp file", strerror(errno), NULL);
+ temp_fn = string_copy(US"%s.XXXXXXX");
+ if ((fd = mkstemp(CS temp_fn)) < 0) /* modifies temp_fn */
+ return tls_error(US"Unable to open temp file", US strerror(errno), NULL, errstr);
(void)fchown(fd, exim_uid, exim_gid); /* Probably not necessary */
/* GnuTLS overshoots!
debug_printf("requesting generation of %d bit Diffie-Hellman prime ...\n",
dh_bits_gen);
rc = gnutls_dh_params_generate2(dh_server_params, dh_bits_gen);
- exim_gnutls_err_check(US"gnutls_dh_params_generate2");
+ exim_gnutls_err_check(rc, US"gnutls_dh_params_generate2");
/* gnutls_dh_params_export_pkcs3() will tell us the exact size, every time,
and I confirmed that a NULL call to get the size first is how the GnuTLS
rc = gnutls_dh_params_export_pkcs3(dh_server_params, GNUTLS_X509_FMT_PEM,
m.data, &sz);
if (rc != GNUTLS_E_SHORT_MEMORY_BUFFER)
- exim_gnutls_err_check(US"gnutls_dh_params_export_pkcs3(NULL) sizing");
+ exim_gnutls_err_check(rc, US"gnutls_dh_params_export_pkcs3(NULL) sizing");
m.size = sz;
- m.data = malloc(m.size);
- if (m.data == NULL)
- return tls_error(US"memory allocation failed", strerror(errno), NULL);
+ if (!(m.data = malloc(m.size)))
+ return tls_error(US"memory allocation failed", US strerror(errno), NULL, errstr);
+
/* this will return a size 1 less than the allocation size above */
rc = gnutls_dh_params_export_pkcs3(dh_server_params, GNUTLS_X509_FMT_PEM,
m.data, &sz);
if (rc != GNUTLS_E_SUCCESS)
{
free(m.data);
- exim_gnutls_err_check(US"gnutls_dh_params_export_pkcs3() real");
+ exim_gnutls_err_check(rc, US"gnutls_dh_params_export_pkcs3() real");
}
m.size = sz; /* shrink by 1, probably */
- sz = write_to_fd_buf(fd, m.data, (size_t) m.size);
- if (sz != m.size)
+ if ((sz = write_to_fd_buf(fd, m.data, (size_t) m.size)) != m.size)
{
free(m.data);
return tls_error(US"TLS cache write D-H params failed",
- strerror(errno), NULL);
+ US strerror(errno), NULL, errstr);
}
free(m.data);
- sz = write_to_fd_buf(fd, US"\n", 1);
- if (sz != 1)
+ if ((sz = write_to_fd_buf(fd, US"\n", 1)) != 1)
return tls_error(US"TLS cache write D-H params final newline failed",
- strerror(errno), NULL);
+ US strerror(errno), NULL, errstr);
- rc = close(fd);
- if (rc)
- return tls_error(US"TLS cache write close() failed",
- strerror(errno), NULL);
+ if ((rc = close(fd)))
+ return tls_error(US"TLS cache write close() failed", US strerror(errno), NULL, errstr);
if (Urename(temp_fn, filename) < 0)
return tls_error(string_sprintf("failed to rename \"%s\" as \"%s\"",
- temp_fn, filename), strerror(errno), NULL);
+ temp_fn, filename), US strerror(errno), NULL, errstr);
DEBUG(D_tls) debug_printf("wrote D-H parameters to file \"%s\"\n", filename);
}
+/* Create and install a selfsigned certificate, for use in server mode */
+
+static int
+tls_install_selfsign(exim_gnutls_state_st * state, uschar ** errstr)
+{
+gnutls_x509_crt_t cert = NULL;
+time_t now;
+gnutls_x509_privkey_t pkey = NULL;
+const uschar * where;
+int rc;
+
+where = US"initialising pkey";
+if ((rc = gnutls_x509_privkey_init(&pkey))) goto err;
+
+where = US"initialising cert";
+if ((rc = gnutls_x509_crt_init(&cert))) goto err;
+
+where = US"generating pkey";
+if ((rc = gnutls_x509_privkey_generate(pkey, GNUTLS_PK_RSA,
+#ifdef SUPPORT_PARAM_TO_PK_BITS
+# ifndef GNUTLS_SEC_PARAM_MEDIUM
+# define GNUTLS_SEC_PARAM_MEDIUM GNUTLS_SEC_PARAM_HIGH
+# endif
+ gnutls_sec_param_to_pk_bits(GNUTLS_PK_RSA, GNUTLS_SEC_PARAM_MEDIUM),
+#else
+ 2048,
+#endif
+ 0)))
+ goto err;
+
+where = US"configuring cert";
+now = 1;
+if ( (rc = gnutls_x509_crt_set_version(cert, 3))
+ || (rc = gnutls_x509_crt_set_serial(cert, &now, sizeof(now)))
+ || (rc = gnutls_x509_crt_set_activation_time(cert, now = time(NULL)))
+ || (rc = gnutls_x509_crt_set_expiration_time(cert, now + 60 * 60)) /* 1 hr */
+ || (rc = gnutls_x509_crt_set_key(cert, pkey))
+
+ || (rc = gnutls_x509_crt_set_dn_by_oid(cert,
+ GNUTLS_OID_X520_COUNTRY_NAME, 0, "UK", 2))
+ || (rc = gnutls_x509_crt_set_dn_by_oid(cert,
+ GNUTLS_OID_X520_ORGANIZATION_NAME, 0, "Exim Developers", 15))
+ || (rc = gnutls_x509_crt_set_dn_by_oid(cert,
+ GNUTLS_OID_X520_COMMON_NAME, 0,
+ smtp_active_hostname, Ustrlen(smtp_active_hostname)))
+ )
+ goto err;
+
+where = US"signing cert";
+if ((rc = gnutls_x509_crt_sign(cert, cert, pkey))) goto err;
+
+where = US"installing selfsign cert";
+ /* Since: 2.4.0 */
+if ((rc = gnutls_certificate_set_x509_key(state->x509_cred, &cert, 1, pkey)))
+ goto err;
+
+rc = OK;
+
+out:
+ if (cert) gnutls_x509_crt_deinit(cert);
+ if (pkey) gnutls_x509_privkey_deinit(pkey);
+ return rc;
+
+err:
+ rc = tls_error(where, US gnutls_strerror(rc), NULL, errstr);
+ goto out;
+}
+
+
+
+
+/* Add certificate and key, from files.
+
+Return:
+ Zero or negative: good. Negate value for certificate index if < 0.
+ Greater than zero: FAIL or DEFER code.
+*/
+
+static int
+tls_add_certfile(exim_gnutls_state_st * state, const host_item * host,
+ uschar * certfile, uschar * keyfile, uschar ** errstr)
+{
+int rc = gnutls_certificate_set_x509_key_file(state->x509_cred,
+ CS certfile, CS keyfile, GNUTLS_X509_FMT_PEM);
+if (rc < 0)
+ return tls_error(
+ string_sprintf("cert/key setup: cert=%s key=%s", certfile, keyfile),
+ US gnutls_strerror(rc), host, errstr);
+return -rc;
+}
+
+
/*************************************************
* Variables re-expanded post-SNI *
*************************************************/
Arguments:
state exim_gnutls_state_st *
+ errstr error string pointer
Returns: OK/DEFER/FAIL
*/
static int
-tls_expand_session_files(exim_gnutls_state_st *state)
+tls_expand_session_files(exim_gnutls_state_st * state, uschar ** errstr)
{
struct stat statbuf;
int rc;
/* We check for tls_sni *before* expansion. */
if (!host) /* server */
- {
if (!state->received_sni)
{
- if (state->tls_certificate &&
- (Ustrstr(state->tls_certificate, US"tls_sni") ||
- Ustrstr(state->tls_certificate, US"tls_in_sni") ||
- Ustrstr(state->tls_certificate, US"tls_out_sni")
- ))
+ if ( state->tls_certificate
+ && ( Ustrstr(state->tls_certificate, US"tls_sni")
+ || Ustrstr(state->tls_certificate, US"tls_in_sni")
+ || Ustrstr(state->tls_certificate, US"tls_out_sni")
+ ) )
{
DEBUG(D_tls) debug_printf("We will re-expand TLS session files if we receive SNI.\n");
state->trigger_sni_changes = TRUE;
saved_tls_verify_certificates = state->exp_tls_verify_certificates;
saved_tls_crl = state->exp_tls_crl;
}
- }
rc = gnutls_certificate_allocate_credentials(&state->x509_cred);
-exim_gnutls_err_check(US"gnutls_certificate_allocate_credentials");
+exim_gnutls_err_check(rc, US"gnutls_certificate_allocate_credentials");
+
+#ifdef SUPPORT_SRV_OCSP_STACK
+gnutls_certificate_set_flags(state->x509_cred, GNUTLS_CERTIFICATE_API_V2);
+#endif
/* remember: expand_check_tlsvar() is expand_check() but fiddling with
state members, assuming consistent naming; and expand_check() returns
/* check if we at least have a certificate, before doing expensive
D-H generation. */
-if (!expand_check_tlsvar(tls_certificate))
+if (!expand_check_tlsvar(tls_certificate, errstr))
return DEFER;
/* certificate is mandatory in server, optional in client */
-if ((state->exp_tls_certificate == NULL) ||
- (*state->exp_tls_certificate == '\0'))
- {
+if ( !state->exp_tls_certificate
+ || !*state->exp_tls_certificate
+ )
if (!host)
- return tls_error(US"no TLS server certificate is specified", NULL, NULL);
+ return tls_install_selfsign(state, errstr);
else
DEBUG(D_tls) debug_printf("TLS: no client certificate specified; okay\n");
- }
-if (state->tls_privatekey && !expand_check_tlsvar(tls_privatekey))
+if (state->tls_privatekey && !expand_check_tlsvar(tls_privatekey, errstr))
return DEFER;
/* tls_privatekey is optional, defaulting to same file as certificate */
state->exp_tls_certificate, state->exp_tls_privatekey);
if (state->received_sni)
- {
- if ((Ustrcmp(state->exp_tls_certificate, saved_tls_certificate) == 0) &&
- (Ustrcmp(state->exp_tls_privatekey, saved_tls_privatekey) == 0))
+ if ( Ustrcmp(state->exp_tls_certificate, saved_tls_certificate) == 0
+ && Ustrcmp(state->exp_tls_privatekey, saved_tls_privatekey) == 0
+ )
{
DEBUG(D_tls) debug_printf("TLS SNI: cert and key unchanged\n");
}
{
DEBUG(D_tls) debug_printf("TLS SNI: have a changed cert/key pair.\n");
}
- }
- rc = gnutls_certificate_set_x509_key_file(state->x509_cred,
- CS state->exp_tls_certificate, CS state->exp_tls_privatekey,
- GNUTLS_X509_FMT_PEM);
- exim_gnutls_err_check(
- string_sprintf("cert/key setup: cert=%s key=%s",
- state->exp_tls_certificate, state->exp_tls_privatekey));
- DEBUG(D_tls) debug_printf("TLS: cert/key registered\n");
- } /* tls_certificate */
-
-
-/* Set the OCSP stapling server info */
+ if (!host) /* server */
+ {
+ const uschar * clist = state->exp_tls_certificate;
+ const uschar * klist = state->exp_tls_privatekey;
+ const uschar * olist;
+ int csep = 0, ksep = 0, osep = 0, cnt = 0;
+ uschar * cfile, * kfile, * ofile;
#ifndef DISABLE_OCSP
-if ( !host /* server */
- && tls_ocsp_file
- )
- {
- if (!expand_check(tls_ocsp_file, US"tls_ocsp_file",
- &state->exp_tls_ocsp_file))
- return DEFER;
+ if (!expand_check(tls_ocsp_file, US"tls_ocsp_file", &ofile, errstr))
+ return DEFER;
+ olist = ofile;
+#endif
+
+ while (cfile = string_nextinlist(&clist, &csep, NULL, 0))
- /* Use the full callback method for stapling just to get observability.
- More efficient would be to read the file once only, if it never changed
- (due to SNI). Would need restart on file update, or watch datestamp. */
+ if (!(kfile = string_nextinlist(&klist, &ksep, NULL, 0)))
+ return tls_error(US"cert/key setup: out of keys", NULL, host, errstr);
+ else if (0 < (rc = tls_add_certfile(state, host, cfile, kfile, errstr)))
+ return rc;
+ else
+ {
+ int gnutls_cert_index = -rc;
+ DEBUG(D_tls) debug_printf("TLS: cert/key %s registered\n", cfile);
- gnutls_certificate_set_ocsp_status_request_function(state->x509_cred,
- server_ocsp_stapling_cb, state->exp_tls_ocsp_file);
+ /* Set the OCSP stapling server info */
- DEBUG(D_tls) debug_printf("Set OCSP response file %s\n", &state->exp_tls_ocsp_file);
- }
+#ifndef DISABLE_OCSP
+ if (tls_ocsp_file)
+ if (gnutls_buggy_ocsp)
+ {
+ DEBUG(D_tls)
+ debug_printf("GnuTLS library is buggy for OCSP; avoiding\n");
+ }
+ else if ((ofile = string_nextinlist(&olist, &osep, NULL, 0)))
+ {
+ /* Use the full callback method for stapling just to get
+ observability. More efficient would be to read the file once only,
+ if it never changed (due to SNI). Would need restart on file update,
+ or watch datestamp. */
+
+# ifdef SUPPORT_SRV_OCSP_STACK
+ rc = gnutls_certificate_set_ocsp_status_request_function2(
+ state->x509_cred, gnutls_cert_index,
+ server_ocsp_stapling_cb, ofile);
+
+ exim_gnutls_err_check(rc,
+ US"gnutls_certificate_set_ocsp_status_request_function2");
+# else
+ if (cnt++ > 0)
+ {
+ DEBUG(D_tls)
+ debug_printf("oops; multiple OCSP files not supported\n");
+ break;
+ }
+ gnutls_certificate_set_ocsp_status_request_function(
+ state->x509_cred, server_ocsp_stapling_cb, ofile);
+# endif
+
+ DEBUG(D_tls) debug_printf("OCSP response file = %s\n", ofile);
+ }
+ else
+ DEBUG(D_tls) debug_printf("ran out of OCSP response files in list\n");
#endif
+ }
+ }
+ else
+ {
+ if (0 < (rc = tls_add_certfile(state, host,
+ state->exp_tls_certificate, state->exp_tls_privatekey, errstr)))
+ return rc;
+ DEBUG(D_tls) debug_printf("TLS: cert/key registered\n");
+ }
+
+ } /* tls_certificate */
/* Set the trusted CAs file if one is provided, and then add the CRL if one is
if (state->tls_verify_certificates && *state->tls_verify_certificates)
{
- if (!expand_check_tlsvar(tls_verify_certificates))
+ if (!expand_check_tlsvar(tls_verify_certificates, errstr))
return DEFER;
+#ifndef SUPPORT_SYSDEFAULT_CABUNDLE
+ if (Ustrcmp(state->exp_tls_verify_certificates, "system") == 0)
+ state->exp_tls_verify_certificates = NULL;
+#endif
if (state->tls_crl && *state->tls_crl)
- if (!expand_check_tlsvar(tls_crl))
+ if (!expand_check_tlsvar(tls_crl, errstr))
return DEFER;
if (!(state->exp_tls_verify_certificates &&
return OK;
}
-if (Ustat(state->exp_tls_verify_certificates, &statbuf) < 0)
+#ifdef SUPPORT_SYSDEFAULT_CABUNDLE
+if (Ustrcmp(state->exp_tls_verify_certificates, "system") == 0)
+ cert_count = gnutls_certificate_set_x509_system_trust(state->x509_cred);
+else
+#endif
{
- log_write(0, LOG_MAIN|LOG_PANIC, "could not stat %s "
- "(tls_verify_certificates): %s", state->exp_tls_verify_certificates,
- strerror(errno));
- return DEFER;
- }
+ if (Ustat(state->exp_tls_verify_certificates, &statbuf) < 0)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "could not stat %s "
+ "(tls_verify_certificates): %s", state->exp_tls_verify_certificates,
+ strerror(errno));
+ return DEFER;
+ }
#ifndef SUPPORT_CA_DIR
-/* The test suite passes in /dev/null; we could check for that path explicitly,
-but who knows if someone has some weird FIFO which always dumps some certs, or
-other weirdness. The thing we really want to check is that it's not a
-directory, since while OpenSSL supports that, GnuTLS does not.
-So s/!S_ISREG/S_ISDIR/ and change some messsaging ... */
-if (S_ISDIR(statbuf.st_mode))
- {
- DEBUG(D_tls)
- debug_printf("verify certificates path is a dir: \"%s\"\n",
- state->exp_tls_verify_certificates);
- log_write(0, LOG_MAIN|LOG_PANIC,
- "tls_verify_certificates \"%s\" is a directory",
- state->exp_tls_verify_certificates);
- return DEFER;
- }
+ /* The test suite passes in /dev/null; we could check for that path explicitly,
+ but who knows if someone has some weird FIFO which always dumps some certs, or
+ other weirdness. The thing we really want to check is that it's not a
+ directory, since while OpenSSL supports that, GnuTLS does not.
+ So s/!S_ISREG/S_ISDIR/ and change some messaging ... */
+ if (S_ISDIR(statbuf.st_mode))
+ {
+ DEBUG(D_tls)
+ debug_printf("verify certificates path is a dir: \"%s\"\n",
+ state->exp_tls_verify_certificates);
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "tls_verify_certificates \"%s\" is a directory",
+ state->exp_tls_verify_certificates);
+ return DEFER;
+ }
#endif
-DEBUG(D_tls) debug_printf("verify certificates = %s size=" OFF_T_FMT "\n",
- state->exp_tls_verify_certificates, statbuf.st_size);
+ DEBUG(D_tls) debug_printf("verify certificates = %s size=" OFF_T_FMT "\n",
+ state->exp_tls_verify_certificates, statbuf.st_size);
-if (statbuf.st_size == 0)
- {
- DEBUG(D_tls)
- debug_printf("cert file empty, no certs, no verification, ignoring any CRL\n");
- return OK;
- }
+ if (statbuf.st_size == 0)
+ {
+ DEBUG(D_tls)
+ debug_printf("cert file empty, no certs, no verification, ignoring any CRL\n");
+ return OK;
+ }
-cert_count =
+ cert_count =
#ifdef SUPPORT_CA_DIR
- (statbuf.st_mode & S_IFMT) == S_IFDIR
- ?
- gnutls_certificate_set_x509_trust_dir(state->x509_cred,
- CS state->exp_tls_verify_certificates, GNUTLS_X509_FMT_PEM)
- :
+ (statbuf.st_mode & S_IFMT) == S_IFDIR
+ ?
+ gnutls_certificate_set_x509_trust_dir(state->x509_cred,
+ CS state->exp_tls_verify_certificates, GNUTLS_X509_FMT_PEM)
+ :
#endif
- gnutls_certificate_set_x509_trust_file(state->x509_cred,
- CS state->exp_tls_verify_certificates, GNUTLS_X509_FMT_PEM);
+ gnutls_certificate_set_x509_trust_file(state->x509_cred,
+ CS state->exp_tls_verify_certificates, GNUTLS_X509_FMT_PEM);
+ }
if (cert_count < 0)
{
rc = cert_count;
- exim_gnutls_err_check(US"gnutls_certificate_set_x509_trust_file");
+ exim_gnutls_err_check(rc, US"setting certificate trust");
}
DEBUG(D_tls) debug_printf("Added %d certificate authorities.\n", cert_count);
if (cert_count < 0)
{
rc = cert_count;
- exim_gnutls_err_check(US"gnutls_certificate_set_x509_crl_file");
+ exim_gnutls_err_check(rc, US"gnutls_certificate_set_x509_crl_file");
}
DEBUG(D_tls) debug_printf("Processed %d CRLs.\n", cert_count);
}
Arguments:
state exim_gnutls_state_st *
+ errstr error string pointer
Returns: OK/DEFER/FAIL
*/
static int
-tls_set_remaining_x509(exim_gnutls_state_st *state)
+tls_set_remaining_x509(exim_gnutls_state_st *state, uschar ** errstr)
{
int rc;
const host_item *host = state->host; /* macro should be reconsidered? */
{
if (!dh_server_params)
{
- rc = init_server_dh();
+ rc = init_server_dh(errstr);
if (rc != OK) return rc;
}
gnutls_certificate_set_dh_params(state->x509_cred, dh_server_params);
/* Link the credentials to the session. */
rc = gnutls_credentials_set(state->session, GNUTLS_CRD_CERTIFICATE, state->x509_cred);
-exim_gnutls_err_check(US"gnutls_credentials_set");
+exim_gnutls_err_check(rc, US"gnutls_credentials_set");
return OK;
}
* Initialize for GnuTLS *
*************************************************/
+
+#ifndef DISABLE_OCSP
+
+static BOOL
+tls_is_buggy_ocsp(void)
+{
+const uschar * s;
+uschar maj, mid, mic;
+
+s = CUS gnutls_check_version(NULL);
+maj = atoi(CCS s);
+if (maj == 3)
+ {
+ while (*s && *s != '.') s++;
+ mid = atoi(CCS ++s);
+ if (mid <= 2)
+ return TRUE;
+ else if (mid >= 5)
+ return FALSE;
+ else
+ {
+ while (*s && *s != '.') s++;
+ mic = atoi(CCS ++s);
+ return mic <= (mid == 3 ? 16 : 3);
+ }
+ }
+return FALSE;
+}
+
+#endif
+
+
/* Called from both server and client code. In the case of a server, errors
before actual TLS negotiation return DEFER.
crl CRL file
require_ciphers tls_require_ciphers setting
caller_state returned state-info structure
+ errstr error string pointer
Returns: OK/DEFER/FAIL
*/
const uschar *cas,
const uschar *crl,
const uschar *require_ciphers,
- exim_gnutls_state_st **caller_state)
+ exim_gnutls_state_st **caller_state,
+ tls_support * tlsp,
+ uschar ** errstr)
{
exim_gnutls_state_st *state;
int rc;
size_t sz;
const char *errpos;
uschar *p;
-BOOL want_default_priorities;
if (!exim_gnutls_base_init_done)
{
if (!gnutls_allow_auto_pkcs11)
{
rc = gnutls_pkcs11_init(GNUTLS_PKCS11_FLAG_MANUAL, NULL);
- exim_gnutls_err_check(US"gnutls_pkcs11_init");
+ exim_gnutls_err_check(rc, US"gnutls_pkcs11_init");
}
#endif
rc = gnutls_global_init();
- exim_gnutls_err_check(US"gnutls_global_init");
+ exim_gnutls_err_check(rc, US"gnutls_global_init");
#if EXIM_GNUTLS_LIBRARY_LOG_LEVEL >= 0
DEBUG(D_tls)
{
gnutls_global_set_log_function(exim_gnutls_logger_cb);
- /* arbitrarily chosen level; bump upto 9 for more */
+ /* arbitrarily chosen level; bump up to 9 for more */
gnutls_global_set_log_level(EXIM_GNUTLS_LIBRARY_LOG_LEVEL);
}
#endif
+#ifndef DISABLE_OCSP
+ if (tls_ocsp_file && (gnutls_buggy_ocsp = tls_is_buggy_ocsp()))
+ log_write(0, LOG_MAIN, "OCSP unusable with this GnuTLS library version");
+#endif
+
exim_gnutls_base_init_done = TRUE;
}
if (host)
{
- state = &state_client;
+ /* For client-side sessions we allocate a context. This lets us run
+ several in parallel. */
+ int old_pool = store_pool;
+ store_pool = POOL_PERM;
+ state = store_get(sizeof(exim_gnutls_state_st));
+ store_pool = old_pool;
+
memcpy(state, &exim_gnutls_state_init, sizeof(exim_gnutls_state_init));
- state->tlsp = &tls_out;
+ state->tlsp = tlsp;
DEBUG(D_tls) debug_printf("initialising GnuTLS client session\n");
rc = gnutls_init(&state->session, GNUTLS_CLIENT);
}
{
state = &state_server;
memcpy(state, &exim_gnutls_state_init, sizeof(exim_gnutls_state_init));
- state->tlsp = &tls_in;
+ state->tlsp = tlsp;
DEBUG(D_tls) debug_printf("initialising GnuTLS server session\n");
rc = gnutls_init(&state->session, GNUTLS_SERVER);
}
-exim_gnutls_err_check(US"gnutls_init");
+exim_gnutls_err_check(rc, US"gnutls_init");
state->host = host;
DEBUG(D_tls)
debug_printf("Expanding various TLS configuration options for session credentials.\n");
-rc = tls_expand_session_files(state);
-if (rc != OK) return rc;
+if ((rc = tls_expand_session_files(state, errstr)) != OK) return rc;
/* These are all other parts of the x509_cred handling, since SNI in GnuTLS
requires a new structure afterwards. */
-rc = tls_set_remaining_x509(state);
-if (rc != OK) return rc;
+if ((rc = tls_set_remaining_x509(state, errstr)) != OK) return rc;
/* set SNI in client, only */
if (host)
{
- if (!expand_check(sni, US"tls_out_sni", &state->tlsp->sni))
+ if (!expand_check(sni, US"tls_out_sni", &state->tlsp->sni, errstr))
return DEFER;
if (state->tlsp->sni && *state->tlsp->sni)
{
sz = Ustrlen(state->tlsp->sni);
rc = gnutls_server_name_set(state->session,
GNUTLS_NAME_DNS, state->tlsp->sni, sz);
- exim_gnutls_err_check(US"gnutls_server_name_set");
+ exim_gnutls_err_check(rc, US"gnutls_server_name_set");
}
}
else if (state->tls_sni)
DEBUG(D_tls) debug_printf("*** PROBABLY A BUG *** " \
- "have an SNI set for a client [%s]\n", state->tls_sni);
+ "have an SNI set for a server [%s]\n", state->tls_sni);
/* This is the priority string support,
http://www.gnutls.org/manual/html_node/Priority-Strings.html
This was backwards incompatible, but means Exim no longer needs to track
all algorithms and provide string forms for them. */
-want_default_priorities = TRUE;
-
+p = NULL;
if (state->tls_require_ciphers && *state->tls_require_ciphers)
{
- if (!expand_check_tlsvar(tls_require_ciphers))
+ if (!expand_check_tlsvar(tls_require_ciphers, errstr))
return DEFER;
if (state->exp_tls_require_ciphers && *state->exp_tls_require_ciphers)
{
- DEBUG(D_tls) debug_printf("GnuTLS session cipher/priority \"%s\"\n",
- state->exp_tls_require_ciphers);
-
- rc = gnutls_priority_init(&state->priority_cache,
- CS state->exp_tls_require_ciphers, &errpos);
- want_default_priorities = FALSE;
p = state->exp_tls_require_ciphers;
+ DEBUG(D_tls) debug_printf("GnuTLS session cipher/priority \"%s\"\n", p);
}
}
-if (want_default_priorities)
+if (!p)
{
+ p = exim_default_gnutls_priority;
DEBUG(D_tls)
- debug_printf("GnuTLS using default session cipher/priority \"%s\"\n",
- exim_default_gnutls_priority);
- rc = gnutls_priority_init(&state->priority_cache,
- exim_default_gnutls_priority, &errpos);
- p = US exim_default_gnutls_priority;
+ debug_printf("GnuTLS using default session cipher/priority \"%s\"\n", p);
}
+rc = gnutls_priority_init(&state->priority_cache, CCS p, &errpos);
-exim_gnutls_err_check(string_sprintf(
+exim_gnutls_err_check(rc, string_sprintf(
"gnutls_priority_init(%s) failed at offset %ld, \"%.6s..\"",
p, errpos - CS p, errpos));
rc = gnutls_priority_set(state->session, state->priority_cache);
-exim_gnutls_err_check(US"gnutls_priority_set");
+exim_gnutls_err_check(rc, US"gnutls_priority_set");
gnutls_db_set_cache_expiration(state->session, ssl_session_timeout);
Arguments:
state exim_gnutls_state_st *
+ errstr pointer to error string
Returns: OK/DEFER/FAIL
*/
static int
-peer_status(exim_gnutls_state_st *state)
+peer_status(exim_gnutls_state_st *state, uschar ** errstr)
{
uschar cipherbuf[256];
-const gnutls_datum *cert_list;
+const gnutls_datum_t *cert_list;
int old_pool, rc;
unsigned int cert_list_size = 0;
gnutls_protocol_t protocol;
cert_list, cert_list_size);
if (state->verify_requirement >= VERIFY_REQUIRED)
return tls_error(US"certificate verification failed",
- "no certificate received from peer", state->host);
+ US"no certificate received from peer", state->host, errstr);
return OK;
}
ct = gnutls_certificate_type_get(state->session);
if (ct != GNUTLS_CRT_X509)
{
- const char *ctn = gnutls_certificate_type_get_name(ct);
+ const uschar *ctn = US gnutls_certificate_type_get_name(ct);
DEBUG(D_tls)
debug_printf("TLS: peer cert not X.509 but instead \"%s\"\n", ctn);
if (state->verify_requirement >= VERIFY_REQUIRED)
return tls_error(US"certificate verification not possible, unhandled type",
- ctn, state->host);
+ ctn, state->host, errstr);
return OK;
}
DEBUG(D_tls) debug_printf("TLS: peer cert problem: %s: %s\n", \
(Label), gnutls_strerror(rc)); \
if (state->verify_requirement >= VERIFY_REQUIRED) \
- return tls_error((Label), gnutls_strerror(rc), state->host); \
+ return tls_error((Label), US gnutls_strerror(rc), state->host, errstr); \
return OK; \
} \
} while (0)
the peer information, but that's too new for some OSes.
Arguments:
- state exim_gnutls_state_st *
- error where to put an error message
+ state exim_gnutls_state_st *
+ errstr where to put an error message
Returns:
FALSE if the session should be rejected
*/
static BOOL
-verify_certificate(exim_gnutls_state_st *state, const char **error)
+verify_certificate(exim_gnutls_state_st * state, uschar ** errstr)
{
int rc;
-unsigned int verify;
+uint verify;
+
+if (state->verify_requirement == VERIFY_NONE)
+ return TRUE;
-*error = NULL;
+DEBUG(D_tls) debug_printf("TLS: checking peer certificate\n");
+*errstr = NULL;
-if ((rc = peer_status(state)) != OK)
+if ((rc = peer_status(state, errstr)) != OK)
{
verify = GNUTLS_CERT_INVALID;
- *error = "certificate not supplied";
+ *errstr = US"certificate not supplied";
}
else
+
+ {
+#ifdef SUPPORT_DANE
+ if (state->verify_requirement == VERIFY_DANE && state->host)
+ {
+ /* Using dane_verify_session_crt() would be easy, as it does it all for us
+ including talking to a DNS resolver. But we want to do that bit ourselves
+ as the testsuite intercepts and fakes its own DNS environment. */
+
+ dane_state_t s;
+ dane_query_t r;
+ uint lsize;
+ const gnutls_datum_t * certlist =
+ gnutls_certificate_get_peers(state->session, &lsize);
+ int usage = tls_out.tlsa_usage;
+
+# ifdef GNUTLS_BROKEN_DANE_VALIDATION
+ /* Split the TLSA records into two sets, TA and EE selectors. Run the
+ dane-verification separately so that we know which selector verified;
+ then we know whether to do name-verification (needed for TA but not EE). */
+
+ if (usage == ((1<<DANESSL_USAGE_DANE_TA) | (1<<DANESSL_USAGE_DANE_EE)))
+ { /* a mixed-usage bundle */
+ int i, j, nrec;
+ const char ** dd;
+ int * ddl;
+
+ for(nrec = 0; state->dane_data_len[nrec]; ) nrec++;
+ nrec++;
+
+ dd = store_get(nrec * sizeof(uschar *));
+ ddl = store_get(nrec * sizeof(int));
+ nrec--;
+
+ if ((rc = dane_state_init(&s, 0)))
+ goto tlsa_prob;
+
+ for (usage = DANESSL_USAGE_DANE_EE;
+ usage >= DANESSL_USAGE_DANE_TA; usage--)
+ { /* take records with this usage */
+ for (j = i = 0; i < nrec; i++)
+ if (state->dane_data[i][0] == usage)
+ {
+ dd[j] = state->dane_data[i];
+ ddl[j++] = state->dane_data_len[i];
+ }
+ if (j)
+ {
+ dd[j] = NULL;
+ ddl[j] = 0;
+
+ if ((rc = dane_raw_tlsa(s, &r, (char * const *)dd, ddl, 1, 0)))
+ goto tlsa_prob;
+
+ if ((rc = dane_verify_crt_raw(s, certlist, lsize,
+ gnutls_certificate_type_get(state->session),
+ r, 0,
+ usage == DANESSL_USAGE_DANE_EE
+ ? DANE_VFLAG_ONLY_CHECK_EE_USAGE : 0,
+ &verify)))
+ {
+ DEBUG(D_tls)
+ debug_printf("TLSA record problem: %s\n", dane_strerror(rc));
+ }
+ else if (verify == 0) /* verification passed */
+ {
+ usage = 1 << usage;
+ break;
+ }
+ }
+ }
+
+ if (rc) goto tlsa_prob;
+ }
+ else
+# endif
+ {
+ if ( (rc = dane_state_init(&s, 0))
+ || (rc = dane_raw_tlsa(s, &r, state->dane_data, state->dane_data_len,
+ 1, 0))
+ || (rc = dane_verify_crt_raw(s, certlist, lsize,
+ gnutls_certificate_type_get(state->session),
+ r, 0,
+# ifdef GNUTLS_BROKEN_DANE_VALIDATION
+ usage == (1 << DANESSL_USAGE_DANE_EE)
+ ? DANE_VFLAG_ONLY_CHECK_EE_USAGE : 0,
+# else
+ 0,
+# endif
+ &verify))
+ )
+ goto tlsa_prob;
+ }
+
+ if (verify != 0) /* verification failed */
+ {
+ gnutls_datum_t str;
+ (void) dane_verification_status_print(verify, &str, 0);
+ *errstr = US str.data; /* don't bother to free */
+ goto badcert;
+ }
+
+# ifdef GNUTLS_BROKEN_DANE_VALIDATION
+ /* If a TA-mode TLSA record was used for verification we must additionally
+ verify the cert name (but not the CA chain). For EE-mode, skip it. */
+
+ if (usage & (1 << DANESSL_USAGE_DANE_EE))
+# endif
+ {
+ state->peer_dane_verified = state->peer_cert_verified = TRUE;
+ goto goodcert;
+ }
+# ifdef GNUTLS_BROKEN_DANE_VALIDATION
+ /* Assume that the name on the A-record is the one that should be matching
+ the cert. An alternate view is that the domain part of the email address
+ is also permissible. */
+
+ if (gnutls_x509_crt_check_hostname(state->tlsp->peercert,
+ CS state->host->name))
+ {
+ state->peer_dane_verified = state->peer_cert_verified = TRUE;
+ goto goodcert;
+ }
+# endif
+ }
+#endif /*SUPPORT_DANE*/
+
rc = gnutls_certificate_verify_peers2(state->session, &verify);
+ }
-/* Handle the result of verification. INVALID seems to be set as well
-as REVOKED, but leave the test for both. */
+/* Handle the result of verification. INVALID is set if any others are. */
-if (rc < 0 ||
- verify & (GNUTLS_CERT_INVALID|GNUTLS_CERT_REVOKED)
- )
+if (rc < 0 || verify & (GNUTLS_CERT_INVALID|GNUTLS_CERT_REVOKED))
{
state->peer_cert_verified = FALSE;
- if (!*error)
- *error = verify & GNUTLS_CERT_REVOKED
- ? "certificate revoked" : "certificate invalid";
+ if (!*errstr)
+ {
+#ifdef GNUTLS_CERT_VFY_STATUS_PRINT
+ DEBUG(D_tls)
+ {
+ gnutls_datum_t txt;
+
+ if (gnutls_certificate_verification_status_print(verify,
+ gnutls_certificate_type_get(state->session), &txt, 0)
+ == GNUTLS_E_SUCCESS)
+ {
+ debug_printf("%s\n", txt.data);
+ gnutls_free(txt.data);
+ }
+ }
+#endif
+ *errstr = verify & GNUTLS_CERT_REVOKED
+ ? US"certificate revoked" : US"certificate invalid";
+ }
DEBUG(D_tls)
debug_printf("TLS certificate verification failed (%s): peerdn=\"%s\"\n",
- *error, state->peerdn ? state->peerdn : US"<unset>");
+ *errstr, state->peerdn ? state->peerdn : US"<unset>");
if (state->verify_requirement >= VERIFY_REQUIRED)
- {
- gnutls_alert_send(state->session,
- GNUTLS_AL_FATAL, GNUTLS_A_BAD_CERTIFICATE);
- return FALSE;
- }
+ goto badcert;
DEBUG(D_tls)
debug_printf("TLS verify failure overridden (host in tls_try_verify_hosts)\n");
}
else
{
-#ifdef EXPERIMENTAL_CERTNAMES
- if (state->exp_tls_verify_cert_hostnames)
+ /* Client side, check the server's certificate name versus the name on the
+ A-record for the connection we made. What to do for server side - what name
+ to use for client? We document that there is no such checking for server
+ side. */
+
+ if ( state->exp_tls_verify_cert_hostnames
+ && !gnutls_x509_crt_check_hostname(state->tlsp->peercert,
+ CS state->exp_tls_verify_cert_hostnames)
+ )
{
- int sep = 0;
- uschar * list = state->exp_tls_verify_cert_hostnames;
- uschar * name;
- while (name = string_nextinlist(&list, &sep, NULL, 0))
- if (gnutls_x509_crt_check_hostname(state->tlsp->peercert, CS name))
- break;
- if (!name)
- {
- DEBUG(D_tls)
- debug_printf("TLS certificate verification failed: cert name mismatch\n");
- if (state->verify_requirement >= VERIFY_REQUIRED)
- {
- gnutls_alert_send(state->session,
- GNUTLS_AL_FATAL, GNUTLS_A_BAD_CERTIFICATE);
- return FALSE;
- }
- return TRUE;
- }
+ DEBUG(D_tls)
+ debug_printf("TLS certificate verification failed: cert name mismatch\n");
+ if (state->verify_requirement >= VERIFY_REQUIRED)
+ goto badcert;
+ return TRUE;
}
-#endif
+
state->peer_cert_verified = TRUE;
DEBUG(D_tls) debug_printf("TLS certificate verified: peerdn=\"%s\"\n",
state->peerdn ? state->peerdn : US"<unset>");
}
-state->tlsp->peerdn = state->peerdn;
+goodcert:
+ state->tlsp->peerdn = state->peerdn;
+ return TRUE;
-return TRUE;
+#ifdef SUPPORT_DANE
+tlsa_prob:
+ *errstr = string_sprintf("TLSA record problem: %s",
+ rc == DANE_E_REQUESTED_DATA_NOT_AVAILABLE ? "none usable" : dane_strerror(rc));
+#endif
+
+badcert:
+ gnutls_alert_send(state->session, GNUTLS_AL_FATAL, GNUTLS_A_BAD_CERTIFICATE);
+ return FALSE;
}
exim_gnutls_state_st *state = &state_server;
unsigned int sni_type;
int rc, old_pool;
+uschar * dummy_errstr;
rc = gnutls_server_name_get(session, sni_name, &data_len, &sni_type, 0);
if (rc != GNUTLS_E_SUCCESS)
else
debug_printf("TLS failure: gnutls_server_name_get(): %s [%d]\n",
gnutls_strerror(rc), rc);
- };
+ }
return 0;
}
if (!state->trigger_sni_changes)
return 0;
-rc = tls_expand_session_files(state);
-if (rc != OK)
+if ((rc = tls_expand_session_files(state, &dummy_errstr)) != OK)
{
/* If the setup of certs/etc failed before handshake, TLS would not have
been offered. The best we can do now is abort. */
return GNUTLS_E_APPLICATION_ERROR_MIN;
}
-rc = tls_set_remaining_x509(state);
+rc = tls_set_remaining_x509(state, &dummy_errstr);
if (rc != OK) return GNUTLS_E_APPLICATION_ERROR_MIN;
return 0;
gnutls_datum_t * ocsp_response)
{
int ret;
+DEBUG(D_tls) debug_printf("OCSP stapling callback: %s\n", US ptr);
if ((ret = gnutls_load_file(ptr, ocsp_response)) < 0)
{
DEBUG(D_tls) debug_printf("Failed to load ocsp stapling file %s\n",
- (char *)ptr);
+ CS ptr);
tls_in.ocsp = OCSP_NOT_RESP;
return GNUTLS_E_NO_CERTIFICATE_STATUS;
}
#endif
-#ifdef EXPERIMENTAL_EVENT
+#ifndef DISABLE_EVENT
/*
We use this callback to get observability and detail-level control
for an exim TLS connection (either direction), raising a tls:cert event
static int
verify_cb(gnutls_session_t session)
{
-const gnutls_datum * cert_list;
+const gnutls_datum_t * cert_list;
unsigned int cert_list_size = 0;
gnutls_x509_crt_t crt;
int rc;
uschar * yield;
exim_gnutls_state_st * state = gnutls_session_get_ptr(session);
-cert_list = gnutls_certificate_get_peers(session, &cert_list_size);
-if (cert_list)
+if ((cert_list = gnutls_certificate_get_peers(session, &cert_list_size)))
while (cert_list_size--)
{
- rc = import_cert(&cert_list[cert_list_size], &crt);
- if (rc != GNUTLS_E_SUCCESS)
+ if ((rc = import_cert(&cert_list[cert_list_size], &crt)) != GNUTLS_E_SUCCESS)
{
DEBUG(D_tls) debug_printf("TLS: peer cert problem: depth %d: %s\n",
cert_list_size, gnutls_strerror(rc));
Arguments:
require_ciphers list of allowed ciphers or NULL
+ errstr pointer to error string
Returns: OK on success
DEFER for errors before the start of the negotiation
- FAIL for errors during the negotation; the server can't
+ FAIL for errors during the negotiation; the server can't
continue running.
*/
int
-tls_server_start(const uschar *require_ciphers)
+tls_server_start(const uschar * require_ciphers, uschar ** errstr)
{
int rc;
-const char *error;
-exim_gnutls_state_st *state = NULL;
+exim_gnutls_state_st * state = NULL;
/* Check for previous activation */
-if (tls_in.active >= 0)
+if (tls_in.active.sock >= 0)
{
- tls_error(US"STARTTLS received after TLS started", "", NULL);
- smtp_printf("554 Already in TLS\r\n");
+ tls_error(US"STARTTLS received after TLS started", US "", NULL, errstr);
+ smtp_printf("554 Already in TLS\r\n", FALSE);
return FAIL;
}
DEBUG(D_tls) debug_printf("initialising GnuTLS as a server\n");
-rc = tls_init(NULL, tls_certificate, tls_privatekey,
+if ((rc = tls_init(NULL, tls_certificate, tls_privatekey,
NULL, tls_verify_certificates, tls_crl,
- require_ciphers, &state);
-if (rc != OK) return rc;
+ require_ciphers, &state, &tls_in, errstr)) != OK) return rc;
/* If this is a host for which certificate verification is mandatory or
optional, set up appropriately. */
gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_IGNORE);
}
-#ifdef EXPERIMENTAL_EVENT
+#ifndef DISABLE_EVENT
if (event_action)
{
state->event_action = event_action;
if (!state->tlsp->on_connect)
{
- smtp_printf("220 TLS go ahead\r\n");
+ smtp_printf("220 TLS go ahead\r\n", FALSE);
fflush(smtp_out);
}
/* Now negotiate the TLS session. We put our own timer on it, since it seems
-that the GnuTLS library doesn't. */
+that the GnuTLS library doesn't.
+From 3.1.0 there is gnutls_handshake_set_timeout() - but it requires you
+to set (and clear down afterwards) up a pull-timeout callback function that does
+a select, so we're no better off unless avoiding signals becomes an issue. */
gnutls_transport_set_ptr2(state->session,
- (gnutls_transport_ptr)(long) fileno(smtp_in),
- (gnutls_transport_ptr)(long) fileno(smtp_out));
+ (gnutls_transport_ptr_t)(long) fileno(smtp_in),
+ (gnutls_transport_ptr_t)(long) fileno(smtp_out));
state->fd_in = fileno(smtp_in);
state->fd_out = fileno(smtp_out);
sigalrm_seen = FALSE;
-if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout);
+if (smtp_receive_timeout > 0) ALARM(smtp_receive_timeout);
do
- {
rc = gnutls_handshake(state->session);
- } while ((rc == GNUTLS_E_AGAIN) ||
- (rc == GNUTLS_E_INTERRUPTED && !sigalrm_seen));
-alarm(0);
+while (rc == GNUTLS_E_AGAIN || rc == GNUTLS_E_INTERRUPTED && !sigalrm_seen);
+ALARM_CLR(0);
if (rc != GNUTLS_E_SUCCESS)
{
- tls_error(US"gnutls_handshake",
- sigalrm_seen ? "timed out" : gnutls_strerror(rc), NULL);
/* It seems that, except in the case of a timeout, we have to close the
connection right here; otherwise if the other end is running OpenSSL it hangs
until the server times out. */
- if (!sigalrm_seen)
+ if (sigalrm_seen)
+ {
+ tls_error(US"gnutls_handshake", US"timed out", NULL, errstr);
+ gnutls_db_remove_session(state->session);
+ }
+ else
{
+ tls_error(US"gnutls_handshake", US gnutls_strerror(rc), NULL, errstr);
+ (void) gnutls_alert_send_appropriate(state->session, rc);
+ gnutls_deinit(state->session);
+ gnutls_certificate_free_credentials(state->x509_cred);
+ millisleep(500);
+ shutdown(state->fd_out, SHUT_WR);
+ for (rc = 1024; fgetc(smtp_in) != EOF && rc > 0; ) rc--; /* drain skt */
(void)fclose(smtp_out);
(void)fclose(smtp_in);
+ smtp_out = smtp_in = NULL;
}
return FAIL;
/* Verify after the fact */
-if ( state->verify_requirement != VERIFY_NONE
- && !verify_certificate(state, &error))
+if (!verify_certificate(state, errstr))
{
if (state->verify_requirement != VERIFY_OPTIONAL)
{
- tls_error(US"certificate verification failed", error, NULL);
+ (void) tls_error(US"certificate verification failed", *errstr, NULL, errstr);
return FAIL;
}
DEBUG(D_tls)
debug_printf("TLS: continuing on only because verification was optional, after: %s\n",
- error);
+ *errstr);
}
/* Figure out peer DN, and if authenticated, etc. */
-rc = peer_status(state);
-if (rc != OK) return rc;
+if ((rc = peer_status(state, NULL)) != OK) return rc;
/* Sets various Exim expansion variables; always safe within server */
state->xfer_buffer = store_malloc(ssl_xfer_buffer_size);
receive_getc = tls_getc;
+receive_getbuf = tls_getbuf;
+receive_get_cache = tls_get_cache;
receive_ungetc = tls_ungetc;
receive_feof = tls_feof;
receive_ferror = tls_ferror;
-#ifdef EXPERIMENTAL_CERTNAMES
static void
tls_client_setup_hostname_checks(host_item * host, exim_gnutls_state_st * state,
smtp_transport_options_block * ob)
{
-if (verify_check_given_host(&ob->tls_verify_cert_hostnames, host) == OK)
+if (verify_check_given_host(CUSS &ob->tls_verify_cert_hostnames, host) == OK)
{
- state->exp_tls_verify_cert_hostnames = host->name;
+ state->exp_tls_verify_cert_hostnames =
+#ifdef SUPPORT_I18N
+ string_domain_utf8_to_alabel(host->name, NULL);
+#else
+ host->name;
+#endif
DEBUG(D_tls)
debug_printf("TLS: server cert verification includes hostname: \"%s\".\n",
state->exp_tls_verify_cert_hostnames);
}
}
+
+
+
+
+#ifdef SUPPORT_DANE
+/* Given our list of RRs from the TLSA lookup, build a lookup block in
+GnuTLS-DANE's preferred format. Hang it on the state str for later
+use in DANE verification.
+
+We point at the dnsa data not copy it, so it must remain valid until
+after verification is done.*/
+
+static BOOL
+dane_tlsa_load(exim_gnutls_state_st * state, dns_answer * dnsa)
+{
+dns_record * rr;
+dns_scan dnss;
+int i;
+const char ** dane_data;
+int * dane_data_len;
+
+for (rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS), i = 1;
+ rr;
+ rr = dns_next_rr(dnsa, &dnss, RESET_NEXT)
+ ) if (rr->type == T_TLSA) i++;
+
+dane_data = store_get(i * sizeof(uschar *));
+dane_data_len = store_get(i * sizeof(int));
+
+for (rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS), i = 0;
+ rr;
+ rr = dns_next_rr(dnsa, &dnss, RESET_NEXT)
+ ) if (rr->type == T_TLSA && rr->size > 3)
+ {
+ const uschar * p = rr->data;
+ uint8_t usage = p[0], sel = p[1], type = p[2];
+
+ DEBUG(D_tls)
+ debug_printf("TLSA: %d %d %d size %d\n", usage, sel, type, rr->size);
+
+ if ( (usage != DANESSL_USAGE_DANE_TA && usage != DANESSL_USAGE_DANE_EE)
+ || (sel != 0 && sel != 1)
+ )
+ continue;
+ switch(type)
+ {
+ case 0: /* Full: cannot check at present */
+ break;
+ case 1: if (rr->size != 3 + 256/8) continue; /* sha2-256 */
+ break;
+ case 2: if (rr->size != 3 + 512/8) continue; /* sha2-512 */
+ break;
+ default: continue;
+ }
+
+ tls_out.tlsa_usage |= 1<<usage;
+ dane_data[i] = CS p;
+ dane_data_len[i++] = rr->size;
+ }
+
+if (!i) return FALSE;
+
+dane_data[i] = NULL;
+dane_data_len[i] = 0;
+
+state->dane_data = (char * const *)dane_data;
+state->dane_data_len = dane_data_len;
+return TRUE;
+}
#endif
+
/*************************************************
* Start a TLS session in a client *
*************************************************/
Arguments:
fd the fd of the connection
- host connected host (for messages)
+ host connected host (for messages and option-tests)
addr the first address (not used)
tb transport (always smtp)
-
-Returns: OK/DEFER/FAIL (because using common functions),
- but for a client, DEFER and FAIL have the same meaning
+ tlsa_dnsa non-NULL, either request or require dane for this host, and
+ a TLSA record found. Therefore, dane verify required.
+ Which implies cert must be requested and supplied, dane
+ verify must pass, and cert verify irrelevant (incl.
+ hostnames), and (caller handled) require_tls
+ tlsp record details of channel configuration
+ errstr error string pointer
+
+Returns: Pointer to TLS session context, or NULL on error
*/
-int
+void *
tls_client_start(int fd, host_item *host,
address_item *addr ARG_UNUSED,
- transport_instance *tb
-#ifdef EXPERIMENTAL_DANE
- , dne_answer * unused_tlsa_dnsa
+ transport_instance * tb,
+#ifdef SUPPORT_DANE
+ dns_answer * tlsa_dnsa,
#endif
- )
+ tls_support * tlsp, uschar ** errstr)
{
-smtp_transport_options_block *ob =
- (smtp_transport_options_block *)tb->options_block;
+smtp_transport_options_block *ob = tb
+ ? (smtp_transport_options_block *)tb->options_block
+ : &smtp_transport_option_defaults;
int rc;
-const char *error;
-exim_gnutls_state_st *state = NULL;
+exim_gnutls_state_st * state = NULL;
+uschar *cipher_list = NULL;
+
#ifndef DISABLE_OCSP
BOOL require_ocsp =
- verify_check_given_host(&ob->hosts_require_ocsp, host) == OK;
+ verify_check_given_host(CUSS &ob->hosts_require_ocsp, host) == OK;
BOOL request_ocsp = require_ocsp ? TRUE
- : verify_check_given_host(&ob->hosts_request_ocsp, host) == OK;
+ : verify_check_given_host(CUSS &ob->hosts_request_ocsp, host) == OK;
#endif
DEBUG(D_tls) debug_printf("initialising GnuTLS as a client on fd %d\n", fd);
-if ((rc = tls_init(host, ob->tls_certificate, ob->tls_privatekey,
+#ifdef SUPPORT_DANE
+if (tlsa_dnsa && ob->dane_require_tls_ciphers)
+ {
+ /* not using expand_check_tlsvar because not yet in state */
+ if (!expand_check(ob->dane_require_tls_ciphers, US"dane_require_tls_ciphers",
+ &cipher_list, errstr))
+ return NULL;
+ cipher_list = cipher_list && *cipher_list
+ ? ob->dane_require_tls_ciphers : ob->tls_require_ciphers;
+ }
+#endif
+
+if (!cipher_list)
+ cipher_list = ob->tls_require_ciphers;
+
+if (tls_init(host, ob->tls_certificate, ob->tls_privatekey,
ob->tls_sni, ob->tls_verify_certificates, ob->tls_crl,
- ob->tls_require_ciphers, &state)) != OK)
- return rc;
+ cipher_list, &state, tlsp, errstr) != OK)
+ return NULL;
{
int dh_min_bits = ob->tls_dh_min_bits;
gnutls_dh_set_prime_bits(state->session, dh_min_bits);
}
-/* Stick to the old behaviour for compatibility if tls_verify_certificates is
+/* Stick to the old behaviour for compatibility if tls_verify_certificates is
set but both tls_verify_hosts and tls_try_verify_hosts are unset. Check only
the specified host patterns if one of them is defined */
-if ( ( state->exp_tls_verify_certificates
- && !ob->tls_verify_hosts
- && !ob->tls_try_verify_hosts
- )
- || verify_check_given_host(&ob->tls_verify_hosts, host) == OK
- )
+#ifdef SUPPORT_DANE
+if (tlsa_dnsa && dane_tlsa_load(state, tlsa_dnsa))
{
-#ifdef EXPERIMENTAL_CERTNAMES
- tls_client_setup_hostname_checks(host, state, ob);
+ DEBUG(D_tls)
+ debug_printf("TLS: server certificate DANE required.\n");
+ state->verify_requirement = VERIFY_DANE;
+ gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_REQUIRE);
+ }
+else
#endif
+ if ( ( state->exp_tls_verify_certificates
+ && !ob->tls_verify_hosts
+ && (!ob->tls_try_verify_hosts || !*ob->tls_try_verify_hosts)
+ )
+ || verify_check_given_host(CUSS &ob->tls_verify_hosts, host) == OK
+ )
+ {
+ tls_client_setup_hostname_checks(host, state, ob);
DEBUG(D_tls)
debug_printf("TLS: server certificate verification required.\n");
state->verify_requirement = VERIFY_REQUIRED;
gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_REQUIRE);
}
-else if (verify_check_given_host(&ob->tls_try_verify_hosts, host) == OK)
+else if (verify_check_given_host(CUSS &ob->tls_try_verify_hosts, host) == OK)
{
-#ifdef EXPERIMENTAL_CERTNAMES
tls_client_setup_hostname_checks(host, state, ob);
-#endif
DEBUG(D_tls)
debug_printf("TLS: server certificate verification optional.\n");
state->verify_requirement = VERIFY_OPTIONAL;
DEBUG(D_tls) debug_printf("TLS: will request OCSP stapling\n");
if ((rc = gnutls_ocsp_status_request_enable_client(state->session,
NULL, 0, NULL)) != OK)
- return tls_error(US"cert-status-req",
- gnutls_strerror(rc), state->host);
- tls_out.ocsp = OCSP_NOT_RESP;
+ {
+ tls_error(US"cert-status-req", US gnutls_strerror(rc), state->host, errstr);
+ return NULL;
+ }
+ tlsp->ocsp = OCSP_NOT_RESP;
}
#endif
-#ifdef EXPERIMENTAL_EVENT
-if (tb->event_action)
+#ifndef DISABLE_EVENT
+if (tb && tb->event_action)
{
state->event_action = tb->event_action;
gnutls_session_set_ptr(state->session, state);
}
#endif
-gnutls_transport_set_ptr(state->session, (gnutls_transport_ptr)(long) fd);
+gnutls_transport_set_ptr(state->session, (gnutls_transport_ptr_t)(long) fd);
state->fd_in = fd;
state->fd_out = fd;
/* There doesn't seem to be a built-in timeout on connection. */
sigalrm_seen = FALSE;
-alarm(ob->command_timeout);
+ALARM(ob->command_timeout);
do
- {
rc = gnutls_handshake(state->session);
- } while ((rc == GNUTLS_E_AGAIN) ||
- (rc == GNUTLS_E_INTERRUPTED && !sigalrm_seen));
-alarm(0);
+while (rc == GNUTLS_E_AGAIN || rc == GNUTLS_E_INTERRUPTED && !sigalrm_seen);
+ALARM_CLR(0);
if (rc != GNUTLS_E_SUCCESS)
- return tls_error(US"gnutls_handshake",
- sigalrm_seen ? "timed out" : gnutls_strerror(rc), state->host);
+ {
+ if (sigalrm_seen)
+ {
+ gnutls_alert_send(state->session, GNUTLS_AL_FATAL, GNUTLS_A_USER_CANCELED);
+ tls_error(US"gnutls_handshake", US"timed out", state->host, errstr);
+ }
+ else
+ tls_error(US"gnutls_handshake", US gnutls_strerror(rc), state->host, errstr);
+ return NULL;
+ }
DEBUG(D_tls) debug_printf("gnutls_handshake was successful\n");
/* Verify late */
-if (state->verify_requirement != VERIFY_NONE &&
- !verify_certificate(state, &error))
- return tls_error(US"certificate verification failed", error, state->host);
+if (!verify_certificate(state, errstr))
+ {
+ tls_error(US"certificate verification failed", *errstr, state->host, errstr);
+ return NULL;
+ }
#ifndef DISABLE_OCSP
if (require_ocsp)
gnutls_free(printed.data);
}
else
- (void) tls_error(US"ocsp decode", gnutls_strerror(rc), state->host);
+ (void) tls_error(US"ocsp decode", US gnutls_strerror(rc), state->host, errstr);
}
if (gnutls_ocsp_status_request_is_checked(state->session, 0) == 0)
{
- tls_out.ocsp = OCSP_FAILED;
- return tls_error(US"certificate status check failed", NULL, state->host);
+ tlsp->ocsp = OCSP_FAILED;
+ tls_error(US"certificate status check failed", NULL, state->host, errstr);
+ return NULL;
}
DEBUG(D_tls) debug_printf("Passed OCSP checking\n");
- tls_out.ocsp = OCSP_VFIED;
+ tlsp->ocsp = OCSP_VFIED;
}
#endif
/* Figure out peer DN, and if authenticated, etc. */
-if ((rc = peer_status(state)) != OK)
- return rc;
+if (peer_status(state, errstr) != OK)
+ return NULL;
/* Sets various Exim expansion variables; may need to adjust for ACL callouts */
extract_exim_vars_from_tls_state(state);
-return OK;
+return state;
}
daemon, to shut down the TLS library, without actually doing a shutdown (which
would tamper with the TLS session in the parent process).
-Arguments: TRUE if gnutls_bye is to be called
+Arguments:
+ ct_ctx client context pointer, or NULL for the one global server context
+ shutdown 1 if TLS close-alert is to be sent,
+ 2 if also response to be waited for
+
Returns: nothing
*/
void
-tls_close(BOOL is_server, BOOL shutdown)
+tls_close(void * ct_ctx, int shutdown)
{
-exim_gnutls_state_st *state = is_server ? &state_server : &state_client;
+exim_gnutls_state_st * state = ct_ctx ? ct_ctx : &state_server;
-if (!state->tlsp || state->tlsp->active < 0) return; /* TLS was not active */
+if (!state->tlsp || state->tlsp->active.sock < 0) return; /* TLS was not active */
if (shutdown)
{
- DEBUG(D_tls) debug_printf("tls_close(): shutting down TLS\n");
- gnutls_bye(state->session, GNUTLS_SHUT_WR);
+ DEBUG(D_tls) debug_printf("tls_close(): shutting down TLS%s\n",
+ shutdown > 1 ? " (with response-wait)" : "");
+
+ ALARM(2);
+ gnutls_bye(state->session, shutdown > 1 ? GNUTLS_SHUT_RDWR : GNUTLS_SHUT_WR);
+ ALARM_CLR(0);
}
gnutls_deinit(state->session);
+gnutls_certificate_free_credentials(state->x509_cred);
-state->tlsp->active = -1;
+
+state->tlsp->active.sock = -1;
+state->tlsp->active.tls_ctx = NULL;
+if (state->xfer_buffer) store_free(state->xfer_buffer);
memcpy(state, &exim_gnutls_state_init, sizeof(exim_gnutls_state_init));
+}
+
+
+
+
+static BOOL
+tls_refill(unsigned lim)
+{
+exim_gnutls_state_st * state = &state_server;
+ssize_t inbytes;
+
+DEBUG(D_tls) debug_printf("Calling gnutls_record_recv(%p, %p, %u)\n",
+ state->session, state->xfer_buffer, ssl_xfer_buffer_size);
+
+sigalrm_seen = FALSE;
+if (smtp_receive_timeout > 0) ALARM(smtp_receive_timeout);
+
+do
+ inbytes = gnutls_record_recv(state->session, state->xfer_buffer,
+ MIN(ssl_xfer_buffer_size, lim));
+while (inbytes == GNUTLS_E_AGAIN);
+
+if (smtp_receive_timeout > 0) ALARM_CLR(0);
+
+if (had_command_timeout) /* set by signal handler */
+ smtp_command_timeout_exit(); /* does not return */
+if (had_command_sigterm)
+ smtp_command_sigterm_exit();
+if (had_data_timeout)
+ smtp_data_timeout_exit();
+if (had_data_sigint)
+ smtp_data_sigint_exit();
-if ((state_server.session == NULL) && (state_client.session == NULL))
+/* Timeouts do not get this far. A zero-byte return appears to mean that the
+TLS session has been closed down, not that the socket itself has been closed
+down. Revert to non-TLS handling. */
+
+if (sigalrm_seen)
{
- gnutls_global_deinit();
- exim_gnutls_base_init_done = FALSE;
+ DEBUG(D_tls) debug_printf("Got tls read timeout\n");
+ state->xfer_error = TRUE;
+ return FALSE;
}
-}
+else if (inbytes == 0)
+ {
+ DEBUG(D_tls) debug_printf("Got TLS_EOF\n");
+
+ receive_getc = smtp_getc;
+ receive_getbuf = smtp_getbuf;
+ receive_get_cache = smtp_get_cache;
+ receive_ungetc = smtp_ungetc;
+ receive_feof = smtp_feof;
+ receive_ferror = smtp_ferror;
+ receive_smtp_buffered = smtp_buffered;
+
+ gnutls_deinit(state->session);
+ gnutls_certificate_free_credentials(state->x509_cred);
+
+ state->session = NULL;
+ state->tlsp->active.sock = -1;
+ state->tlsp->active.tls_ctx = NULL;
+ state->tlsp->bits = 0;
+ state->tlsp->certificate_verified = FALSE;
+ tls_channelbinding_b64 = NULL;
+ state->tlsp->cipher = NULL;
+ state->tlsp->peercert = NULL;
+ state->tlsp->peerdn = NULL;
+ return FALSE;
+ }
+/* Handle genuine errors */
+else if (inbytes < 0)
+ {
+ DEBUG(D_tls) debug_printf("%s: err from gnutls_record_recv(\n", __FUNCTION__);
+ record_io_error(state, (int) inbytes, US"recv", NULL);
+ state->xfer_error = TRUE;
+ return FALSE;
+ }
+#ifndef DISABLE_DKIM
+dkim_exim_verify_feed(state->xfer_buffer, inbytes);
+#endif
+state->xfer_buffer_hwm = (int) inbytes;
+state->xfer_buffer_lwm = 0;
+return TRUE;
+}
/*************************************************
* TLS version of getc *
This feeds DKIM and should be used for all message-body reads.
-Arguments: none
+Arguments: lim Maximum amount to read/buffer
Returns: the next character or EOF
*/
int
-tls_getc(void)
+tls_getc(unsigned lim)
{
-exim_gnutls_state_st *state = &state_server;
+exim_gnutls_state_st * state = &state_server;
+
if (state->xfer_buffer_lwm >= state->xfer_buffer_hwm)
- {
- ssize_t inbytes;
+ if (!tls_refill(lim))
+ return state->xfer_error ? EOF : smtp_getc(lim);
- DEBUG(D_tls) debug_printf("Calling gnutls_record_recv(%p, %p, %u)\n",
- state->session, state->xfer_buffer, ssl_xfer_buffer_size);
+/* Something in the buffer; return next uschar */
- if (smtp_receive_timeout > 0) alarm(smtp_receive_timeout);
- inbytes = gnutls_record_recv(state->session, state->xfer_buffer,
- ssl_xfer_buffer_size);
- alarm(0);
+return state->xfer_buffer[state->xfer_buffer_lwm++];
+}
- /* A zero-byte return appears to mean that the TLS session has been
- closed down, not that the socket itself has been closed down. Revert to
- non-TLS handling. */
+uschar *
+tls_getbuf(unsigned * len)
+{
+exim_gnutls_state_st * state = &state_server;
+unsigned size;
+uschar * buf;
- if (inbytes == 0)
+if (state->xfer_buffer_lwm >= state->xfer_buffer_hwm)
+ if (!tls_refill(*len))
{
- DEBUG(D_tls) debug_printf("Got TLS_EOF\n");
-
- receive_getc = smtp_getc;
- receive_ungetc = smtp_ungetc;
- receive_feof = smtp_feof;
- receive_ferror = smtp_ferror;
- receive_smtp_buffered = smtp_buffered;
-
- gnutls_deinit(state->session);
- state->session = NULL;
- state->tlsp->active = -1;
- state->tlsp->bits = 0;
- state->tlsp->certificate_verified = FALSE;
- tls_channelbinding_b64 = NULL;
- state->tlsp->cipher = NULL;
- state->tlsp->peercert = NULL;
- state->tlsp->peerdn = NULL;
-
- return smtp_getc();
+ if (!state->xfer_error) return smtp_getbuf(len);
+ *len = 0;
+ return NULL;
}
- /* Handle genuine errors */
+if ((size = state->xfer_buffer_hwm - state->xfer_buffer_lwm) > *len)
+ size = *len;
+buf = &state->xfer_buffer[state->xfer_buffer_lwm];
+state->xfer_buffer_lwm += size;
+*len = size;
+return buf;
+}
- else if (inbytes < 0)
- {
- record_io_error(state, (int) inbytes, US"recv", NULL);
- state->xfer_error = 1;
- return EOF;
- }
+
+void
+tls_get_cache()
+{
#ifndef DISABLE_DKIM
- dkim_exim_verify_feed(state->xfer_buffer, inbytes);
+exim_gnutls_state_st * state = &state_server;
+int n = state->xfer_buffer_hwm - state->xfer_buffer_lwm;
+if (n > 0)
+ dkim_exim_verify_feed(state->xfer_buffer+state->xfer_buffer_lwm, n);
#endif
- state->xfer_buffer_hwm = (int) inbytes;
- state->xfer_buffer_lwm = 0;
- }
+}
-/* Something in the buffer; return next uschar */
-return state->xfer_buffer[state->xfer_buffer_lwm++];
+BOOL
+tls_could_read(void)
+{
+return state_server.xfer_buffer_lwm < state_server.xfer_buffer_hwm
+ || gnutls_record_check_pending(state_server.session) > 0;
}
then the caller must feed DKIM.
Arguments:
+ ct_ctx client context pointer, or NULL for the one global server context
buff buffer of data
len size of buffer
Returns: the number of bytes read
- -1 after a failed read
+ -1 after a failed read, including EOF
*/
int
-tls_read(BOOL is_server, uschar *buff, size_t len)
+tls_read(void * ct_ctx, uschar *buff, size_t len)
{
-exim_gnutls_state_st *state = is_server ? &state_server : &state_client;
+exim_gnutls_state_st * state = ct_ctx ? ct_ctx : &state_server;
ssize_t inbytes;
if (len > INT_MAX)
debug_printf("Calling gnutls_record_recv(%p, %p, " SIZE_T_FMT ")\n",
state->session, buff, len);
-inbytes = gnutls_record_recv(state->session, buff, len);
+do
+ inbytes = gnutls_record_recv(state->session, buff, len);
+while (inbytes == GNUTLS_E_AGAIN);
+
if (inbytes > 0) return inbytes;
if (inbytes == 0)
{
DEBUG(D_tls) debug_printf("Got TLS_EOF\n");
}
-else record_io_error(state, (int)inbytes, US"recv", NULL);
+else
+ {
+ DEBUG(D_tls) debug_printf("%s: err from gnutls_record_recv(\n", __FUNCTION__);
+ record_io_error(state, (int)inbytes, US"recv", NULL);
+ }
return -1;
}
/*
Arguments:
- is_server channel specifier
+ ct_ctx client context pointer, or NULL for the one global server context
buff buffer of data
len number of bytes
+ more more data expected soon
Returns: the number of bytes after a successful write,
-1 after a failed write
*/
int
-tls_write(BOOL is_server, const uschar *buff, size_t len)
+tls_write(void * ct_ctx, const uschar * buff, size_t len, BOOL more)
{
ssize_t outbytes;
size_t left = len;
-exim_gnutls_state_st *state = is_server ? &state_server : &state_client;
+exim_gnutls_state_st * state = ct_ctx ? ct_ctx : &state_server;
+#ifdef SUPPORT_CORK
+static BOOL corked = FALSE;
+
+if (more && !corked) gnutls_record_cork(state->session);
+#endif
+
+DEBUG(D_tls) debug_printf("%s(%p, " SIZE_T_FMT "%s)\n", __FUNCTION__,
+ buff, left, more ? ", more" : "");
-DEBUG(D_tls) debug_printf("tls_do_write(%p, " SIZE_T_FMT ")\n", buff, left);
while (left > 0)
{
DEBUG(D_tls) debug_printf("gnutls_record_send(SSL, %p, " SIZE_T_FMT ")\n",
buff, left);
- outbytes = gnutls_record_send(state->session, buff, left);
+
+ do
+ outbytes = gnutls_record_send(state->session, buff, left);
+ while (outbytes == GNUTLS_E_AGAIN);
DEBUG(D_tls) debug_printf("outbytes=" SSIZE_T_FMT "\n", outbytes);
if (outbytes < 0)
{
+ DEBUG(D_tls) debug_printf("%s: gnutls_record_send err\n", __FUNCTION__);
record_io_error(state, outbytes, US"send", NULL);
return -1;
}
len = INT_MAX;
}
+#ifdef SUPPORT_CORK
+if (more != corked)
+ {
+ if (!more) (void) gnutls_record_uncork(state->session, 0);
+ corked = more;
+ }
+#endif
+
return (int) len;
}
uschar *expciphers = NULL;
gnutls_priority_t priority_cache;
const char *errpos;
+uschar * dummy_errstr;
#define validate_check_rc(Label) do { \
if (rc != GNUTLS_E_SUCCESS) { if (exim_gnutls_base_init_done) gnutls_global_deinit(); \
if (!(tls_require_ciphers && *tls_require_ciphers))
return_deinit(NULL);
-if (!expand_check(tls_require_ciphers, US"tls_require_ciphers", &expciphers))
+if (!expand_check(tls_require_ciphers, US"tls_require_ciphers", &expciphers,
+ &dummy_errstr))
return_deinit(US"failed to expand tls_require_ciphers");
if (!(expciphers && *expciphers))
git://git.exim.org / exim.git / blobdiff