* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2014 */
+/* Copyright (c) The Exim Maintainers 2020 - 2024 */
+/* Copyright (c) University of Cambridge 1995 - 2018 */
/* See the file NOTICE for conditions of use and distribution. */
+/* SPDX-License-Identifier: GPL-2.0-or-later */
/* The main code for delivering a message. */
#include "exim.h"
+#include "transports/smtp.h"
+#include <sys/uio.h>
+#include <assert.h>
/* Data block for keeping track of subprocesses for parallel remote
int transport_count; /* returned transport count value */
BOOL done; /* no more data needed */
uschar *msg; /* error message */
- uschar *return_path; /* return_path for these addresses */
+ const uschar *return_path; /* return_path for these addresses */
} pardata;
/* Values for the process_recipients variable */
/* Mutually recursive functions for marking addresses done. */
-static void child_done(address_item *, uschar *);
-static void address_done(address_item *, uschar *);
+static void child_done(address_item *, const uschar *);
+static void address_done(address_item *, const uschar *);
/* Table for turning base-62 numbers into binary */
static address_item *addr_remote = NULL;
static address_item *addr_route = NULL;
static address_item *addr_succeed = NULL;
-static address_item *addr_dsntmp = NULL;
-static address_item *addr_senddsn = NULL;
static FILE *message_log = NULL;
static BOOL update_spool;
static BOOL remove_journal;
static int parcount = 0;
static pardata *parlist = NULL;
+static struct pollfd *parpoll;
static int return_count;
static uschar *frozen_info = US"";
-static uschar *used_return_path = NULL;
+static const uschar * used_return_path = NULL;
-static uschar spoolname[PATH_MAX];
+/*************************************************
+* read as much as requested *
+*************************************************/
+
+/* The syscall read(2) doesn't always returns as much as we want. For
+several reasons it might get less. (Not talking about signals, as syscalls
+are restartable). When reading from a network or pipe connection the sender
+might send in smaller chunks, with delays between these chunks. The read(2)
+may return such a chunk.
+
+The more the writer writes and the smaller the pipe between write and read is,
+the more we get the chance of reading leass than requested. (See bug 2130)
+
+This function read(2)s until we got all the data we *requested*.
+
+Note: This function may block. Use it only if you're sure about the
+amount of data you will get.
+
+Argument:
+ fd the file descriptor to read from
+ buffer pointer to a buffer of size len
+ len the requested(!) amount of bytes
+
+Returns: the amount of bytes read
+*/
+static ssize_t
+readn(int fd, void * buffer, size_t len)
+{
+uschar * next = buffer;
+uschar * end = next + len;
+
+while (next < end)
+ {
+ ssize_t got = read(fd, next, end - next);
+
+ /* I'm not sure if there are signals that can interrupt us,
+ for now I assume the worst */
+ if (got == -1 && errno == EINTR) continue;
+ if (got <= 0) return next - US buffer;
+ next += got;
+ }
+
+return len;
+}
+
/*************************************************
* Make a new address item *
*/
address_item *
-deliver_make_addr(uschar *address, BOOL copy)
+deliver_make_addr(const uschar * address, BOOL copy)
{
-address_item *addr = store_get(sizeof(address_item));
+address_item * addr = store_get(sizeof(address_item), GET_UNTAINTED);
*addr = address_defaults;
if (copy) address = string_copy(address);
addr->address = address;
void
deliver_set_expansions(address_item *addr)
{
-if (addr == NULL)
+if (!addr)
{
- uschar ***p = address_expansions;
- while (*p != NULL) **p++ = NULL;
+ const uschar ***p = address_expansions;
+ while (*p) **p++ = NULL;
return;
}
what they contain. These first ones are always set, taking their values from
the first address. */
-if (addr->host_list == NULL)
+if (!addr->host_list)
{
deliver_host = deliver_host_address = US"";
deliver_host_port = 0;
}
deliver_recipients = addr;
-deliver_address_data = addr->p.address_data;
-deliver_domain_data = addr->p.domain_data;
-deliver_localpart_data = addr->p.localpart_data;
+deliver_address_data = addr->prop.address_data;
+deliver_domain_data = addr->prop.domain_data;
+deliver_localpart_data = addr->prop.localpart_data;
+router_var = addr->prop.variables;
/* These may be unset for multiple addresses */
/* If there's only one address we can set everything. */
-if (addr->next == NULL)
+if (!addr->next)
{
address_item *addr_orig;
deliver_localpart = addr->local_part;
deliver_localpart_prefix = addr->prefix;
+ deliver_localpart_prefix_v = addr->prefix_v;
deliver_localpart_suffix = addr->suffix;
+ deliver_localpart_suffix_v = addr->suffix_v;
- for (addr_orig = addr; addr_orig->parent != NULL;
- addr_orig = addr_orig->parent);
+ for (addr_orig = addr; addr_orig->parent; addr_orig = addr_orig->parent) ;
deliver_domain_orig = addr_orig->domain;
/* Re-instate any prefix and suffix in the original local part. In all
filter sets up a pipe, file, or autoreply delivery, no router is involved.
In this case, though, there won't be any prefix or suffix to worry about. */
- deliver_localpart_orig = (addr_orig->router == NULL)? addr_orig->local_part :
- addr_orig->router->caseful_local_part?
- addr_orig->cc_local_part : addr_orig->lc_local_part;
+ deliver_localpart_orig = !addr_orig->router
+ ? addr_orig->local_part
+ : addr_orig->router->caseful_local_part
+ ? addr_orig->cc_local_part
+ : addr_orig->lc_local_part;
/* If there's a parent, make its domain and local part available, and if
delivering to a pipe or file, or sending an autoreply, get the local
part from the parent. For pipes and files, put the pipe or file string
into address_pipe and address_file. */
- if (addr->parent != NULL)
+ if (addr->parent)
{
deliver_domain_parent = addr->parent->domain;
- deliver_localpart_parent = (addr->parent->router == NULL)?
- addr->parent->local_part :
- addr->parent->router->caseful_local_part?
- addr->parent->cc_local_part : addr->parent->lc_local_part;
+ deliver_localpart_parent = !addr->parent->router
+ ? addr->parent->local_part
+ : addr->parent->router->caseful_local_part
+ ? addr->parent->cc_local_part
+ : addr->parent->lc_local_part;
/* File deliveries have their own flag because they need to be picked out
as special more often. */
if (testflag(addr, af_pfr))
{
- if (testflag(addr, af_file)) address_file = addr->local_part;
- else if (deliver_localpart[0] == '|') address_pipe = addr->local_part;
+ if (testflag(addr, af_file)) address_file = addr->local_part;
+ else if (deliver_localpart[0] == '|') address_pipe = addr->local_part;
deliver_localpart = addr->parent->local_part;
deliver_localpart_prefix = addr->parent->prefix;
+ deliver_localpart_prefix_v = addr->parent->prefix_v;
deliver_localpart_suffix = addr->parent->suffix;
+ deliver_localpart_suffix_v = addr->parent->suffix_v;
}
}
/* get message delivery status (0 - don't deliver | 1 - deliver) */
bmi_deliver = bmi_get_delivery_status(bmi_base64_verdict);
/* if message is to be delivered, get eventual alternate location */
- if (bmi_deliver == 1) {
+ if (bmi_deliver == 1)
bmi_alt_location = bmi_get_alt_location(bmi_base64_verdict);
- };
#endif
}
else
{
- address_item *addr2;
if (testflag(addr, af_pfr))
{
- if (testflag(addr, af_file)) address_file = addr->local_part;
- else if (addr->local_part[0] == '|') address_pipe = addr->local_part;
+ if (testflag(addr, af_file)) address_file = addr->local_part;
+ else if (addr->local_part[0] == '|') address_pipe = addr->local_part;
}
- for (addr2 = addr->next; addr2 != NULL; addr2 = addr2->next)
+ for (address_item * addr2 = addr->next; addr2; addr2 = addr2->next)
{
- if (deliver_domain != NULL &&
- Ustrcmp(deliver_domain, addr2->domain) != 0)
+ if (deliver_domain && Ustrcmp(deliver_domain, addr2->domain) != 0)
deliver_domain = NULL;
- if (self_hostname != NULL && (addr2->self_hostname == NULL ||
- Ustrcmp(self_hostname, addr2->self_hostname) != 0))
+ if ( self_hostname
+ && ( !addr2->self_hostname
+ || Ustrcmp(self_hostname, addr2->self_hostname) != 0
+ ) )
self_hostname = NULL;
- if (deliver_domain == NULL && self_hostname == NULL) break;
+ if (!deliver_domain && !self_hostname) break;
}
}
}
directory if it does not exist. From release 4.21, normal message logs should
be created when the message is received.
+Called from deliver_message(), can be operating as root.
+
Argument:
filename the file name
mode the mode required
static int
open_msglog_file(uschar *filename, int mode, uschar **error)
{
-int fd = Uopen(filename, O_WRONLY|O_APPEND|O_CREAT, mode);
-
-if (fd < 0 && errno == ENOENT)
- {
- uschar temp[16];
- sprintf(CS temp, "msglog/%s", message_subdir);
- if (message_subdir[0] == 0) temp[6] = 0;
- (void)directory_make(spool_directory, temp, MSGLOG_DIRECTORY_MODE, TRUE);
- fd = Uopen(filename, O_WRONLY|O_APPEND|O_CREAT, mode);
- }
+if (Ustrstr(filename, US"/../"))
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE,
+ "Attempt to open msglog file path with upward-traversal: '%s'\n", filename);
-/* Set the close-on-exec flag and change the owner to the exim uid/gid (this
-function is called as root). Double check the mode, because the group setting
-doesn't always get set automatically. */
-
-if (fd >= 0)
+for (int i = 2; i > 0; i--)
{
- (void)fcntl(fd, F_SETFD, fcntl(fd, F_GETFD) | FD_CLOEXEC);
- if (fchown(fd, exim_uid, exim_gid) < 0)
- {
- *error = US"chown";
- return -1;
- }
- if (fchmod(fd, mode) < 0)
+ int fd = Uopen(filename,
+ EXIM_CLOEXEC | EXIM_NOFOLLOW | O_WRONLY|O_APPEND|O_CREAT, mode);
+ if (fd >= 0)
{
- *error = US"chmod";
- return -1;
+ /* Set the close-on-exec flag and change the owner to the exim uid/gid (this
+ function is called as root). Double check the mode, because the group setting
+ doesn't always get set automatically. */
+
+#ifndef O_CLOEXEC
+ (void)fcntl(fd, F_SETFD, fcntl(fd, F_GETFD) | FD_CLOEXEC);
+#endif
+ if (exim_fchown(fd, exim_uid, exim_gid, filename) < 0)
+ {
+ *error = US"chown";
+ return -1;
+ }
+ if (fchmod(fd, mode) < 0)
+ {
+ *error = US"chmod";
+ return -1;
+ }
+ return fd;
}
+ if (errno != ENOENT)
+ break;
+
+ (void)directory_make(spool_directory,
+ spool_sname(US"msglog", message_subdir),
+ MSGLOG_DIRECTORY_MODE, TRUE);
}
-else *error = US"create";
-return fd;
+*error = US"create or open";
+return -1;
}
static void
replicate_status(address_item *addr)
{
-address_item *addr2;
-for (addr2 = addr->next; addr2 != NULL; addr2 = addr2->next)
+for (address_item * addr2 = addr->next; addr2; addr2 = addr2->next)
{
- addr2->transport = addr->transport;
+ addr2->transport = addr->transport;
addr2->transport_return = addr->transport_return;
- addr2->basic_errno = addr->basic_errno;
- addr2->more_errno = addr->more_errno;
- addr2->special_action = addr->special_action;
- addr2->message = addr->message;
- addr2->user_message = addr->user_message;
+ addr2->basic_errno = addr->basic_errno;
+ addr2->more_errno = addr->more_errno;
+ addr2->delivery_time = addr->delivery_time;
+ addr2->special_action = addr->special_action;
+ addr2->message = addr->message;
+ addr2->user_message = addr->user_message;
}
}
This enables Exim to use a single SMTP transaction for sending to two entirely
different domains that happen to end up pointing at the same hosts.
+We do not try to batch up different A-record host names that refer to the
+same IP.
+
Arguments:
one points to the first host list
two points to the second host list
static BOOL
same_hosts(host_item *one, host_item *two)
{
-while (one != NULL && two != NULL)
+while (one && two)
{
if (Ustrcmp(one->name, two->name) != 0)
{
/* Find the ends of the shortest sequence of identical MX values */
- while (end_one->next != NULL && end_one->next->mx == mx &&
- end_two->next != NULL && end_two->next->mx == mx)
+ while ( end_one->next && end_one->next->mx == mx
+ && end_two->next && end_two->next->mx == mx)
{
end_one = end_one->next;
end_two = end_two->next;
two = end_two;
}
- /* Hosts matched */
+ /* if the names matched but ports do not, mismatch */
+ else if (one->port != two->port)
+ return FALSE;
+
+#ifdef SUPPORT_DANE
+ /* DNSSEC equality */
+ if (one->dnssec != two->dnssec) return FALSE;
+#endif
+ /* Hosts matched */
one = one->next;
two = two->next;
}
static BOOL
same_headers(header_line *one, header_line *two)
{
-for (;;)
+for (;; one = one->next, two = two->next)
{
if (one == two) return TRUE; /* Includes the case where both NULL */
- if (one == NULL || two == NULL) return FALSE;
+ if (!one || !two) return FALSE;
if (Ustrcmp(one->text, two->text) != 0) return FALSE;
- one = one->next;
- two = two->next;
}
}
*/
static BOOL
-same_strings(uschar *one, uschar *two)
+same_strings(const uschar * one, const uschar * two)
{
if (one == two) return TRUE; /* Includes the case where both NULL */
-if (one == NULL || two == NULL) return FALSE;
+if (!one || !two) return FALSE;
return (Ustrcmp(one, two) == 0);
}
static BOOL
same_ugid(transport_instance *tp, address_item *addr1, address_item *addr2)
{
-if (!tp->uid_set && tp->expand_uid == NULL && !tp->deliver_as_creator)
- {
- if (testflag(addr1, af_uid_set) != testflag(addr2, af_gid_set) ||
- (testflag(addr1, af_uid_set) &&
- (addr1->uid != addr2->uid ||
- testflag(addr1, af_initgroups) != testflag(addr2, af_initgroups))))
- return FALSE;
- }
+if ( !tp->uid_set && !tp->expand_uid
+ && !tp->deliver_as_creator
+ && ( testflag(addr1, af_uid_set) != testflag(addr2, af_gid_set)
+ || ( testflag(addr1, af_uid_set)
+ && ( addr1->uid != addr2->uid
+ || testflag(addr1, af_initgroups) != testflag(addr2, af_initgroups)
+ ) ) ) )
+ return FALSE;
-if (!tp->gid_set && tp->expand_gid == NULL)
- {
- if (testflag(addr1, af_gid_set) != testflag(addr2, af_gid_set) ||
- (testflag(addr1, af_gid_set) && addr1->gid != addr2->gid))
- return FALSE;
- }
+if ( !tp->gid_set && !tp->expand_gid
+ && ( testflag(addr1, af_gid_set) != testflag(addr2, af_gid_set)
+ || ( testflag(addr1, af_gid_set)
+ && addr1->gid != addr2->gid
+ ) ) )
+ return FALSE;
return TRUE;
}
*/
static void
-address_done(address_item *addr, uschar *now)
+address_done(address_item * addr, const uschar * now)
{
-address_item *dup;
-
update_spool = TRUE; /* Ensure spool gets updated */
/* Top-level address */
-if (addr->parent == NULL)
+if (!addr->parent)
{
tree_add_nonrecipient(addr->unique);
tree_add_nonrecipient(addr->address);
else if (testflag(addr, af_homonym))
{
- if (addr->transport != NULL)
- {
+ if (addr->transport)
tree_add_nonrecipient(
- string_sprintf("%s/%s", addr->unique + 3, addr->transport->name));
- }
+ string_sprintf("%s/%s", addr->unique + 3, addr->transport->drinst.name));
}
/* Non-homonymous child address */
/* Check the list of duplicate addresses and ensure they are now marked
done as well. */
-for (dup = addr_duplicate; dup != NULL; dup = dup->next)
- {
+for (address_item * dup = addr_duplicate; dup; dup = dup->next)
if (Ustrcmp(addr->unique, dup->unique) == 0)
{
tree_add_nonrecipient(dup->unique);
child_done(dup, now);
}
- }
}
*/
static void
-child_done(address_item *addr, uschar *now)
+child_done(address_item * addr, const uschar * now)
{
-address_item *aa;
-while (addr->parent != NULL)
+while (addr->parent)
{
+ address_item * aa;
+
addr = addr->parent;
- if ((addr->child_count -= 1) > 0) return; /* Incomplete parent */
+ if (--addr->child_count > 0) return; /* Incomplete parent */
address_done(addr, now);
/* Log the completion of all descendents only when there is no ancestor with
the same original address. */
- for (aa = addr->parent; aa != NULL; aa = aa->parent)
+ for (aa = addr->parent; aa; aa = aa->parent)
if (Ustrcmp(aa->address, addr->address) == 0) break;
- if (aa != NULL) continue;
+ if (aa) continue;
deliver_msglog("%s %s: children all complete\n", now, addr->address);
DEBUG(D_deliver) debug_printf("%s: children all complete\n", addr->address);
+/*************************************************
+* Delivery logging support functions *
+*************************************************/
+
+/* The LOGGING() checks in d_log_interface() are complicated for backwards
+compatibility. When outgoing interface logging was originally added, it was
+conditional on just incoming_interface (which is off by default). The
+outgoing_interface option is on by default to preserve this behaviour, but
+you can enable incoming_interface and disable outgoing_interface to get I=
+fields on incoming lines only.
-static uschar *
-d_hostlog(uschar * s, int * sizep, int * ptrp, address_item * addr)
+Arguments:
+ g The log line
+ addr The address to be logged
+
+Returns: New value for s
+*/
+
+static gstring *
+d_log_interface(gstring * g)
{
- s = string_append(s, sizep, ptrp, 5, US" H=", addr->host_used->name,
- US" [", addr->host_used->address, US"]");
- if ((log_extra_selector & LX_outgoing_port) != 0)
- s = string_append(s, sizep, ptrp, 2, US":", string_sprintf("%d",
- addr->host_used->port));
- return s;
+if (LOGGING(incoming_interface) && LOGGING(outgoing_interface)
+ && sending_ip_address)
+ {
+ g = string_fmt_append(g, " I=[%s]", sending_ip_address);
+ if (LOGGING(outgoing_port))
+ g = string_fmt_append(g, ":%d", sending_port);
+ }
+return g;
}
-#ifdef SUPPORT_TLS
-static uschar *
-d_tlslog(uschar * s, int * sizep, int * ptrp, address_item * addr)
+
+
+static gstring *
+d_hostlog(gstring * g, address_item * addr)
+{
+host_item * h = addr->host_used;
+
+g = string_append(g, 2, US" H=", h->name);
+
+if (LOGGING(dnssec) && h->dnssec == DS_YES)
+ g = string_catn(g, US" DS", 3);
+
+g = string_append(g, 3, US" [", h->address, US"]");
+
+if (LOGGING(outgoing_port))
+ g = string_fmt_append(g, ":%d", h->port);
+
+if (testflag(addr, af_cont_conn))
+ g = string_catn(g, US"*", 1);
+
+#ifdef SUPPORT_SOCKS
+if (LOGGING(proxy) && proxy_local_address)
+ {
+ g = string_append(g, 3, US" PRX=[", proxy_local_address, US"]");
+ if (LOGGING(outgoing_port))
+ g = string_fmt_append(g, ":%d", proxy_local_port);
+ }
+#endif
+
+g = d_log_interface(g);
+
+if (testflag(addr, af_tcp_fastopen))
+ g = string_catn(g, US" TFO*", testflag(addr, af_tcp_fastopen_data) ? 5 : 4);
+
+return g;
+}
+
+
+
+
+
+#ifndef DISABLE_TLS
+static gstring *
+d_tlslog(gstring * g, address_item * addr)
{
- if ((log_extra_selector & LX_tls_cipher) != 0 && addr->cipher != NULL)
- s = string_append(s, sizep, ptrp, 2, US" X=", addr->cipher);
- if ((log_extra_selector & LX_tls_certificate_verified) != 0 &&
- addr->cipher != NULL)
- s = string_append(s, sizep, ptrp, 2, US" CV=",
- testflag(addr, af_cert_verified)
- ?
-#ifdef EXPERIMENTAL_DANE
- testflag(addr, af_dane_verified)
- ? "dane"
- :
+if (LOGGING(tls_cipher) && addr->cipher)
+ {
+ g = string_append(g, 2, US" X=", addr->cipher);
+#ifndef DISABLE_TLS_RESUME
+ if (LOGGING(tls_resumption) && testflag(addr, af_tls_resume))
+ g = string_catn(g, US"*", 1);
#endif
- "yes"
- : "no");
- if ((log_extra_selector & LX_tls_peerdn) != 0 && addr->peerdn != NULL)
- s = string_append(s, sizep, ptrp, 3, US" DN=\"",
- string_printing(addr->peerdn), US"\"");
- return s;
+ }
+if (LOGGING(tls_certificate_verified) && addr->cipher)
+ g = string_append(g, 2, US" CV=",
+ testflag(addr, af_cert_verified)
+ ?
+#ifdef SUPPORT_DANE
+ testflag(addr, af_dane_verified)
+ ? "dane"
+ :
+#endif
+ "yes"
+ : "no");
+if (LOGGING(tls_peerdn) && addr->peerdn)
+ g = string_append(g, 3, US" DN=\"", string_printing(addr->peerdn), US"\"");
+return g;
}
#endif
-#ifdef EXPERIMENTAL_EVENT
+#ifndef DISABLE_EVENT
+/* Distribute a named event to any listeners.
+
+Args: action config option specifying listener
+ event name of the event
+ ev_data associated data for the event
+ errnop pointer to errno for modification, or null
+
+Return: string expansion from listener, or NULL
+*/
+
uschar *
-event_raise(uschar * action, uschar * event, uschar * ev_data)
+event_raise(const uschar * action, const uschar * event, const uschar * ev_data,
+ int * errnop)
{
-uschar * s;
+const uschar * s;
if (action)
{
DEBUG(D_deliver)
event_name = event;
event_data = ev_data;
- if (!(s = expand_string(action)) && *expand_string_message)
+ if (!(s = expand_cstring(action)) && *expand_string_message)
log_write(0, LOG_MAIN|LOG_PANIC,
"failed to expand event_action %s in %s: %s\n",
- event, transport_name, expand_string_message);
+ event, transport_name ? transport_name : US"main", expand_string_message);
event_name = event_data = NULL;
/* If the expansion returns anything but an empty string, flag for
- the caller to modify his normal processing
+ the caller to modify his normal processing. Copy the string to
+ de-const it.
*/
if (s && *s)
{
DEBUG(D_deliver)
debug_printf("Event(%s): event_action returned \"%s\"\n", event, s);
- return s;
+ if (errnop)
+ *errnop = ERRNO_EVENT;
+ return string_copy(s);
}
}
return NULL;
}
-static void
-msg_event_raise(uschar * event, address_item * addr)
+void
+msg_event_raise(const uschar * event, const address_item * addr)
{
-uschar * save_domain = deliver_domain;
-uschar * save_local = deliver_localpart;
-uschar * save_host = deliver_host;
-
-if (!addr->transport)
- return;
-
-router_name = addr->router ? addr->router->name : NULL;
-transport_name = addr->transport->name;
+const uschar * save_domain = deliver_domain;
+const uschar * save_local = deliver_localpart;
+const uschar * save_host = deliver_host;
+const uschar * save_address = deliver_host_address;
+const uschar * save_rn = router_name;
+const uschar * save_tn = transport_name;
+const int save_port = deliver_host_port;
+
+router_name = addr->router ? addr->router->drinst.name : NULL;
deliver_domain = addr->domain;
deliver_localpart = addr->local_part;
deliver_host = addr->host_used ? addr->host_used->name : NULL;
-(void) event_raise(addr->transport->event_action, event,
- addr->host_used || Ustrcmp(addr->transport->driver_name, "lmtp") == 0
- ? addr->message : NULL);
+if (!addr->transport)
+ {
+ if (Ustrcmp(event, "msg:fail:delivery") == 0)
+ {
+ /* An address failed with no transport involved. This happens when
+ a filter was used which triggered a fail command (in such a case
+ a transport isn't needed). Convert it to an internal fail event. */
+
+ (void) event_raise(event_action, US"msg:fail:internal", addr->message, NULL);
+ }
+ }
+else
+ {
+ const uschar * dr_name = addr->transport->drinst.driver_name;
+
+ transport_name = addr->transport->drinst.name;
+ (void) event_raise(addr->transport->event_action, event,
+ addr->host_used
+ || Ustrcmp(dr_name, "smtp") == 0
+ || Ustrcmp(dr_name, "lmtp") == 0
+ || Ustrcmp(dr_name, "autoreply") == 0
+ ? addr->message : NULL,
+ NULL);
+ }
+deliver_host_port = save_port;
+deliver_host_address = save_address;
deliver_host = save_host;
deliver_localpart = save_local;
deliver_domain = save_domain;
-router_name = transport_name = NULL;
+router_name = save_rn;
+transport_name = save_tn;
+}
+#endif /*DISABLE_EVENT*/
+
+
+
+/******************************************************************************/
+
+
+/*************************************************
+* Generate local part for logging *
+*************************************************/
+
+static const uschar *
+string_get_lpart_sub(const address_item * addr, const uschar * s)
+{
+#ifdef SUPPORT_I18N
+if (testflag(addr, af_utf8_downcvt))
+ {
+ const uschar * t = string_localpart_utf8_to_alabel(s, NULL);
+ return t ? t : s; /* t is NULL on a failed conversion */
+ }
+#endif
+return s;
+}
+
+/* This function is a subroutine for use in string_log_address() below.
+
+Arguments:
+ addr the address being logged
+ yield the current dynamic buffer pointer
+
+Returns: the new value of the buffer pointer
+*/
+
+static gstring *
+string_get_localpart(address_item * addr, gstring * yield)
+{
+const uschar * s;
+
+if (testflag(addr, af_include_affixes) && (s = addr->prefix))
+ yield = string_cat(yield, string_get_lpart_sub(addr, s));
+
+yield = string_cat(yield, string_get_lpart_sub(addr, addr->local_part));
+
+if (testflag(addr, af_include_affixes) && (s = addr->suffix))
+ yield = string_cat(yield, string_get_lpart_sub(addr, s));
+
+return yield;
+}
+
+
+/*************************************************
+* Generate log address list *
+*************************************************/
+
+/* This function generates a list consisting of an address and its parents, for
+use in logging lines. For saved onetime aliased addresses, the onetime parent
+field is used. If the address was delivered by a transport with rcpt_include_
+affixes set, the af_include_affixes bit will be set in the address. In that
+case, we include the affixes here too.
+
+Arguments:
+ g points to growing-string struct
+ addr bottom (ultimate) address
+ all_parents if TRUE, include all parents
+ success TRUE for successful delivery
+
+Returns: a growable string in dynamic store
+*/
+
+static gstring *
+string_log_address(gstring * g,
+ address_item *addr, BOOL all_parents, BOOL success)
+{
+BOOL add_topaddr = TRUE;
+address_item *topaddr;
+
+/* Find the ultimate parent */
+
+for (topaddr = addr; topaddr->parent; topaddr = topaddr->parent) ;
+
+/* We start with just the local part for pipe, file, and reply deliveries, and
+for successful local deliveries from routers that have the log_as_local flag
+set. File deliveries from filters can be specified as non-absolute paths in
+cases where the transport is going to complete the path. If there is an error
+before this happens (expansion failure) the local part will not be updated, and
+so won't necessarily look like a path. Add extra text for this case. */
+
+if ( testflag(addr, af_pfr)
+ || ( success
+ && addr->router && addr->router->log_as_local
+ && addr->transport
+ && ((transport_info *)addr->transport->drinst.info)->local
+ ) )
+ {
+ if (testflag(addr, af_file) && addr->local_part[0] != '/')
+ g = string_catn(g, CUS"save ", 5);
+ g = string_get_localpart(addr, g);
+ }
+
+/* Other deliveries start with the full address. It we have split it into local
+part and domain, use those fields. Some early failures can happen before the
+splitting is done; in those cases use the original field. */
+
+else
+ {
+ uschar * cmp;
+ int off = gstring_length(g); /* start of the "full address" */
+
+ if (addr->local_part)
+ {
+ const uschar * s;
+ g = string_get_localpart(addr, g);
+ g = string_catn(g, US"@", 1);
+ s = addr->domain;
+#ifdef SUPPORT_I18N
+ if (testflag(addr, af_utf8_downcvt))
+ s = string_localpart_utf8_to_alabel(s, NULL);
+#endif
+ g = string_cat(g, s);
+ }
+ else
+ g = string_cat(g, addr->address);
+
+ /* If the address we are going to print is the same as the top address,
+ and all parents are not being included, don't add on the top address. First
+ of all, do a caseless comparison; if this succeeds, do a caseful comparison
+ on the local parts. */
+
+ cmp = g->s + off; /* only now, as rebuffer likely done */
+ string_from_gstring(g); /* ensure nul-terminated */
+ if ( strcmpic(cmp, topaddr->address) == 0
+ && Ustrncmp(cmp, topaddr->address, Ustrchr(cmp, '@') - cmp) == 0
+ && !addr->onetime_parent
+ && (!all_parents || !addr->parent || addr->parent == topaddr)
+ )
+ add_topaddr = FALSE;
+ }
+
+/* If all parents are requested, or this is a local pipe/file/reply, and
+there is at least one intermediate parent, show it in brackets, and continue
+with all of them if all are wanted. */
+
+if ( (all_parents || testflag(addr, af_pfr))
+ && addr->parent
+ && addr->parent != topaddr)
+ {
+ uschar *s = US" (";
+ for (address_item * addr2 = addr->parent; addr2 != topaddr; addr2 = addr2->parent)
+ {
+ g = string_catn(g, s, 2);
+ g = string_cat (g, addr2->address);
+ if (!all_parents) break;
+ s = US", ";
+ }
+ g = string_catn(g, US")", 1);
+ }
+
+/* Add the top address if it is required */
+
+if (add_topaddr)
+ g = string_append(g, 3,
+ US" <",
+ addr->onetime_parent ? addr->onetime_parent : topaddr->address,
+ US">");
+
+return g;
}
-#endif /*EXPERIMENTAL_EVENT*/
+
+
+
+/******************************************************************************/
void
delivery_log(int flags, address_item * addr, int logchar, uschar * msg)
{
-uschar *log_address;
-int size = 256; /* Used for a temporary, */
-int ptr = 0; /* expanding buffer, for */
-uschar *s; /* building log lines; */
-void *reset_point; /* released afterwards. */
+gstring * g; /* Used for a temporary, expanding buffer, for building log lines */
+rmark reset_point;
/* Log the delivery on the main log. We use an extensible string to build up
the log line, and reset the store afterwards. Remote deliveries should always
have a pointer to the host item that succeeded; local deliveries can have a
pointer to a single host item in their host list, for use by the transport. */
-#ifdef EXPERIMENTAL_EVENT
+#ifndef DISABLE_EVENT
/* presume no successful remote delivery */
lookup_dnssec_authenticated = NULL;
#endif
-s = reset_point = store_get(size);
+reset_point = store_mark();
+g = string_get_tainted(256, GET_TAINTED); /* addrs will be tainted, so avoid copy */
-log_address = string_log_address(addr, (log_write_selector & L_all_parents) != 0, TRUE);
if (msg)
- s = string_append(s, &size, &ptr, 3, host_and_ident(TRUE), US" ", log_address);
+ g = string_append(g, 2, host_and_ident(TRUE), US" ");
else
{
- s[ptr++] = logchar;
- s = string_append(s, &size, &ptr, 2, US"> ", log_address);
+ g->s[0] = logchar; g->ptr = 1;
+ g = string_catn(g, US"> ", 2);
}
-
-if ((log_extra_selector & LX_sender_on_delivery) != 0 || msg)
- s = string_append(s, &size, &ptr, 3, US" F=<", sender_address, US">");
-
-#ifdef EXPERIMENTAL_SRS
-if(addr->p.srs_sender)
- s = string_append(s, &size, &ptr, 3, US" SRS=<", addr->p.srs_sender, US">");
+g = string_log_address(g, addr, LOGGING(all_parents), TRUE);
+
+if (LOGGING(sender_on_delivery) || msg)
+ g = string_append(g, 3, US" F=<",
+#ifdef SUPPORT_I18N
+ testflag(addr, af_utf8_downcvt)
+ ? string_address_utf8_to_alabel(sender_address, NULL)
+ :
#endif
+ sender_address,
+ US">");
+
+if (*queue_name)
+ g = string_append(g, 2, US" Q=", queue_name);
/* You might think that the return path must always be set for a successful
delivery; indeed, I did for some time, until this statement crashed. The case
when it is not set is for a delivery to /dev/null which is optimised by not
being run at all. */
-if (used_return_path != NULL &&
- (log_extra_selector & LX_return_path_on_delivery) != 0)
- s = string_append(s, &size, &ptr, 3, US" P=<", used_return_path, US">");
+if (used_return_path && LOGGING(return_path_on_delivery))
+ g = string_append(g, 3, US" P=<", used_return_path, US">");
if (msg)
- s = string_append(s, &size, &ptr, 2, US" ", msg);
+ g = string_append(g, 2, US" ", msg);
/* For a delivery from a system filter, there may not be a router */
-if (addr->router != NULL)
- s = string_append(s, &size, &ptr, 2, US" R=", addr->router->name);
+if (addr->router)
+ g = string_append(g, 2, US" R=", addr->router->drinst.name);
-s = string_append(s, &size, &ptr, 2, US" T=", addr->transport->name);
+g = string_append(g, 2, US" T=", addr->transport->drinst.name);
-if ((log_extra_selector & LX_delivery_size) != 0)
- s = string_append(s, &size, &ptr, 2, US" S=",
- string_sprintf("%d", transport_count));
+if (LOGGING(delivery_size))
+ g = string_fmt_append(g, " S=%d", transport_count);
/* Local delivery */
-if (addr->transport->info->local)
+if (((transport_info *)addr->transport->drinst.info)->local)
{
if (addr->host_list)
- s = string_append(s, &size, &ptr, 2, US" H=", addr->host_list->name);
- if (addr->shadow_message != NULL)
- s = string_cat(s, &size, &ptr, addr->shadow_message,
- Ustrlen(addr->shadow_message));
+ g = string_append(g, 2, US" H=", addr->host_list->name);
+ g = d_log_interface(g);
+ if (addr->shadow_message)
+ g = string_cat(g, addr->shadow_message);
}
/* Remote delivery */
{
if (addr->host_used)
{
- s = d_hostlog(s, &size, &ptr, addr);
- if (continue_sequence > 1)
- s = string_cat(s, &size, &ptr, US"*", 1);
+ g = d_hostlog(g, addr);
-#ifdef EXPERIMENTAL_EVENT
+#ifndef DISABLE_EVENT
deliver_host_address = addr->host_used->address;
deliver_host_port = addr->host_used->port;
deliver_host = addr->host_used->name;
#endif
}
-#ifdef SUPPORT_TLS
- s = d_tlslog(s, &size, &ptr, addr);
+#ifndef DISABLE_TLS
+ g = d_tlslog(g, addr);
#endif
if (addr->authenticator)
{
- s = string_append(s, &size, &ptr, 2, US" A=", addr->authenticator);
+ g = string_append(g, 2, US" A=", addr->authenticator);
if (addr->auth_id)
{
- s = string_append(s, &size, &ptr, 2, US":", addr->auth_id);
- if (log_extra_selector & LX_smtp_mailauth && addr->auth_sndr)
- s = string_append(s, &size, &ptr, 2, US":", addr->auth_sndr);
+ g = string_append(g, 2, US":", addr->auth_id);
+ if (LOGGING(smtp_mailauth) && addr->auth_sndr)
+ g = string_append(g, 2, US":", addr->auth_sndr);
}
}
+ if (LOGGING(pipelining))
+ {
+ if (testflag(addr, af_pipelining))
+ g = string_catn(g, US" L", 2);
+#ifndef DISABLE_PIPE_CONNECT
+ if (testflag(addr, af_early_pipe))
+ g = string_catn(g, US"*", 1);
+#endif
+ }
+
#ifndef DISABLE_PRDR
- if (addr->flags & af_prdr_used)
- s = string_append(s, &size, &ptr, 1, US" PRDR");
+ if (testflag(addr, af_prdr_used))
+ g = string_catn(g, US" PRDR", 5);
#endif
+
+ if (testflag(addr, af_chunking_used))
+ g = string_catn(g, US" K", 2);
}
+#ifndef DISABLE_DKIM
+ if (addr->dkim_used && LOGGING(dkim_verbose))
+ {
+ g = string_catn(g, US" DKIM=", 6);
+ g = string_cat(g, addr->dkim_used);
+ }
+#endif
+
/* confirmation message (SMTP (host_used) and LMTP (driver_name)) */
-if (log_extra_selector & LX_smtp_confirmation &&
- addr->message &&
- (addr->host_used || Ustrcmp(addr->transport->driver_name, "lmtp") == 0))
+if ( LOGGING(smtp_confirmation)
+ && addr->message
+ && ( addr->host_used
+ || Ustrcmp(addr->transport->drinst.driver_name, "lmtp") == 0)
+ )
{
- int i;
+ unsigned lim = big_buffer_size < 1024 ? big_buffer_size : 1024;
uschar *p = big_buffer;
uschar *ss = addr->message;
*p++ = '\"';
- for (i = 0; i < 256 && ss[i] != 0; i++) /* limit logged amount */
+ for (int i = 0; i < lim && ss[i] != 0; i++) /* limit logged amount */
{
if (ss[i] == '\"' || ss[i] == '\\') *p++ = '\\'; /* quote \ and " */
*p++ = ss[i];
}
*p++ = '\"';
*p = 0;
- s = string_append(s, &size, &ptr, 2, US" C=", big_buffer);
+ g = string_append(g, 2, US" C=", big_buffer);
}
/* Time on queue and actual time taken to deliver */
-if ((log_extra_selector & LX_queue_time) != 0)
- s = string_append(s, &size, &ptr, 2, US" QT=",
- readconf_printtime( (int) ((long)time(NULL) - (long)received_time)) );
+if (LOGGING(queue_time))
+ g = string_append(g, 2, US" QT=", string_timesince(
+ LOGGING(queue_time_exclusive) ? &received_time_complete : &received_time));
-if ((log_extra_selector & LX_deliver_time) != 0)
- s = string_append(s, &size, &ptr, 2, US" DT=",
- readconf_printtime(addr->more_errno));
+if (LOGGING(deliver_time))
+ g = string_append(g, 2, US" DT=", string_timediff(&addr->delivery_time));
/* string_cat() always leaves room for the terminator. Release the
store we used to build the line after writing it. */
-s[ptr] = 0;
-log_write(0, flags, "%s", s);
+log_write(0, flags, "%Y", g);
-#ifdef EXPERIMENTAL_EVENT
+#ifndef DISABLE_EVENT
if (!msg) msg_event_raise(US"msg:delivery", addr);
#endif
+static void
+deferral_log(address_item * addr, uschar * now,
+ int logflags, uschar * driver_name, uschar * driver_kind)
+{
+rmark reset_point = store_mark();
+gstring * g = string_get(256);
+
+/* Build up the line that is used for both the message log and the main
+log. */
+
+/* Create the address string for logging. Must not do this earlier, because
+an OK result may be changed to FAIL when a pipe returns text. */
+
+g = string_log_address(g, addr, LOGGING(all_parents), FALSE);
+
+if (*queue_name)
+ g = string_append(g, 2, US" Q=", queue_name);
+
+/* Either driver_name contains something and driver_kind contains
+" router" or " transport" (note the leading space), or driver_name is
+a null string and driver_kind contains "routing" without the leading
+space, if all routing has been deferred. When a domain has been held,
+so nothing has been done at all, both variables contain null strings. */
+
+if (driver_name)
+ {
+ if (driver_kind[1] == 't' && addr->router)
+ g = string_append(g, 2, US" R=", addr->router->drinst.name);
+ g = string_fmt_append(g, " %c=%s", toupper(driver_kind[1]), driver_name);
+ }
+else if (driver_kind)
+ g = string_append(g, 2, US" ", driver_kind);
+
+g = string_fmt_append(g, " defer (%d)", addr->basic_errno);
+
+if (addr->basic_errno > 0)
+ g = string_append(g, 2, US": ", US strerror(addr->basic_errno));
+
+if (addr->host_used)
+ g = d_hostlog(g, addr);
+
+if (LOGGING(deliver_time))
+ g = string_append(g, 2, US" DT=", string_timediff(&addr->delivery_time));
+
+if (addr->message)
+ g = string_append(g, 2, US": ", addr->message);
+
+/* Log the deferment in the message log, but don't clutter it
+up with retry-time defers after the first delivery attempt. */
+
+if (f.deliver_firsttime || addr->basic_errno > ERRNO_RETRY_BASE)
+ deliver_msglog("%s %.*s\n", now, g->ptr, g->s);
+
+/* Write the main log and reset the store.
+For errors of the type "retry time not reached" (also remotes skipped
+on queue run), logging is controlled by L_retry_defer. Note that this kind
+of error number is negative, and all the retry ones are less than any
+others. */
+
+
+log_write(addr->basic_errno <= ERRNO_RETRY_BASE ? L_retry_defer : 0, logflags,
+ "== %Y", g);
+
+store_reset(reset_point);
+return;
+}
+
+
+
+static void
+failure_log(address_item * addr, uschar * driver_kind, uschar * now)
+{
+rmark reset_point = store_mark();
+gstring * g = string_get(256);
+
+#ifndef DISABLE_EVENT
+/* Message failures for which we will send a DSN get their event raised
+later so avoid doing it here. */
+
+if ( !addr->prop.ignore_error
+ && !(addr->dsn_flags & (rf_dsnflags & ~rf_notify_failure))
+ )
+ msg_event_raise(US"msg:fail:delivery", addr);
+#endif
+
+/* Build up the log line for the message and main logs */
+
+/* Create the address string for logging. Must not do this earlier, because
+an OK result may be changed to FAIL when a pipe returns text. */
+
+g = string_log_address(g, addr, LOGGING(all_parents), FALSE);
+
+if (LOGGING(sender_on_delivery))
+ g = string_append(g, 3, US" F=<", sender_address, US">");
+
+if (*queue_name)
+ g = string_append(g, 2, US" Q=", queue_name);
+
+/* Return path may not be set if no delivery actually happened */
+
+if (used_return_path && LOGGING(return_path_on_delivery))
+ g = string_append(g, 3, US" P=<", used_return_path, US">");
+
+if (addr->router)
+ g = string_append(g, 2, US" R=", addr->router->drinst.name);
+if (addr->transport)
+ g = string_append(g, 2, US" T=", addr->transport->drinst.name);
+
+if (addr->host_used)
+ g = d_hostlog(g, addr);
+
+#ifndef DISABLE_TLS
+g = d_tlslog(g, addr);
+#endif
+
+if (addr->basic_errno > 0)
+ g = string_append(g, 2, US": ", US strerror(addr->basic_errno));
+
+if (addr->message)
+ g = string_append(g, 2, US": ", addr->message);
+
+if (LOGGING(deliver_time))
+ g = string_append(g, 2, US" DT=", string_timediff(&addr->delivery_time));
+
+/* Do the logging. For the message log, "routing failed" for those cases,
+just to make it clearer. */
+
+if (driver_kind)
+ deliver_msglog("%s %s failed for %.*s\n", now, driver_kind, g->ptr, g->s);
+else
+ deliver_msglog("%s %.*s\n", now, g->ptr, g->s);
+
+log_write(0, LOG_MAIN, "** %Y", g);
+
+store_reset(reset_point);
+return;
+}
+
+
+
/*************************************************
* Actions at the end of handling an address *
*************************************************/
*/
static void
-post_process_one(address_item *addr, int result, int logflags, int driver_type,
+post_process_one(address_item * addr, int result, int logflags, int driver_type,
int logchar)
{
-uschar *now = tod_stamp(tod_log);
-uschar *driver_kind = NULL;
-uschar *driver_name = NULL;
-uschar *log_address;
-
-int size = 256; /* Used for a temporary, */
-int ptr = 0; /* expanding buffer, for */
-uschar *s; /* building log lines; */
-void *reset_point; /* released afterwards. */
+uschar * now = tod_stamp(tod_log);
+uschar * driver_kind = NULL;
+uschar * driver_name = NULL;
DEBUG(D_deliver) debug_printf("post-process %s (%d)\n", addr->address, result);
/* Set up driver kind and name for logging. Disable logging if the router or
transport has disabled it. */
-if (driver_type == DTYPE_TRANSPORT)
+if (driver_type == EXIM_DTYPE_TRANSPORT)
{
- if (addr->transport != NULL)
+ if (addr->transport)
{
- driver_name = addr->transport->name;
+ driver_name = addr->transport->drinst.name;
driver_kind = US" transport";
- disable_logging = addr->transport->disable_logging;
+ f.disable_logging = addr->transport->disable_logging;
}
else driver_kind = US"transporting";
}
-else if (driver_type == DTYPE_ROUTER)
+else if (driver_type == EXIM_DTYPE_ROUTER)
{
- if (addr->router != NULL)
+ if (addr->router)
{
- driver_name = addr->router->name;
+ driver_name = addr->router->drinst.name;
driver_kind = US" router";
- disable_logging = addr->router->disable_logging;
+ f.disable_logging = addr->router->disable_logging;
}
else driver_kind = US"routing";
}
fudge, but I don't know a cleaner way of doing this. (If the item is badly
malformed, it won't ever have gone near LDAP.) */
-if (addr->message != NULL)
+if (addr->message)
{
- addr->message = string_printing(addr->message);
- if (((Ustrstr(addr->message, "failed to expand") != NULL) || (Ustrstr(addr->message, "expansion of ") != NULL)) &&
- (Ustrstr(addr->message, "mysql") != NULL ||
- Ustrstr(addr->message, "pgsql") != NULL ||
-#ifdef EXPERIMENTAL_REDIS
- Ustrstr(addr->message, "redis") != NULL ||
-#endif
- Ustrstr(addr->message, "sqlite") != NULL ||
- Ustrstr(addr->message, "ldap:") != NULL ||
- Ustrstr(addr->message, "ldapdn:") != NULL ||
- Ustrstr(addr->message, "ldapm:") != NULL))
- {
- addr->message = string_sprintf("Temporary internal error");
- }
+ const uschar * s = string_printing(addr->message);
+
+ /* deconst cast ok as string_printing known to have alloc'n'copied */
+ addr->message = expand_hide_passwords(US s);
}
/* If we used a transport that has one of the "return_output" options set, and
In any case, we close the message file, because we cannot afford to leave a
file-descriptor for one address while processing (maybe very many) others. */
-if (addr->return_file >= 0 && addr->return_filename != NULL)
+if (addr->return_file >= 0 && addr->return_filename)
{
BOOL return_output = FALSE;
struct stat statbuf;
if (fstat(addr->return_file, &statbuf) == 0 && statbuf.st_size > 0)
{
- transport_instance *tb = addr->transport;
+ transport_instance * tb = addr->transport;
/* Handle logging options */
- if (tb->log_output || (result == FAIL && tb->log_fail_output) ||
- (result == DEFER && tb->log_defer_output))
+ if ( tb->log_output
+ || result == FAIL && tb->log_fail_output
+ || result == DEFER && tb->log_defer_output
+ )
{
- uschar *s;
- FILE *f = Ufopen(addr->return_filename, "rb");
- if (f == NULL)
+ uschar * s;
+ FILE * f = Ufopen(addr->return_filename, "rb");
+ if (!f)
log_write(0, LOG_MAIN|LOG_PANIC, "failed to open %s to log output "
- "from %s transport: %s", addr->return_filename, tb->name,
+ "from %s transport: %s", addr->return_filename, tb->drinst.name,
strerror(errno));
else
- {
- s = US Ufgets(big_buffer, big_buffer_size, f);
- if (s != NULL)
+ if ((s = US Ufgets(big_buffer, big_buffer_size, f)))
{
uschar *p = big_buffer + Ustrlen(big_buffer);
+ const uschar * sp;
while (p > big_buffer && isspace(p[-1])) p--;
*p = 0;
- s = string_printing(big_buffer);
+ sp = string_printing(big_buffer);
log_write(0, LOG_MAIN, "<%s>: %s transport output: %s",
- addr->address, tb->name, s);
+ addr->address, tb->drinst.name, sp);
}
- (void)fclose(f);
- }
+ (void)fclose(f);
}
/* Handle returning options, but only if there is an address to return
the text to. */
- if (sender_address[0] != 0 || addr->p.errors_address != NULL)
- {
+ if (sender_address[0] != 0 || addr->prop.errors_address)
if (tb->return_output)
{
addr->transport_return = result = FAIL;
- if (addr->basic_errno == 0 && addr->message == NULL)
+ if (addr->basic_errno == 0 && !addr->message)
addr->message = US"return message generated";
return_output = TRUE;
}
else
if (tb->return_fail_output && result == FAIL) return_output = TRUE;
- }
}
/* Get rid of the file unless it might be returned, but close it in
address_done(addr, now);
DEBUG(D_deliver) debug_printf("%s delivered\n", addr->address);
- if (addr->parent == NULL)
+ if (!addr->parent)
deliver_msglog("%s %s: %s%s succeeded\n", now, addr->address,
driver_name, driver_kind);
else
}
/* Certificates for logging (via events) */
-#ifdef SUPPORT_TLS
+#ifndef DISABLE_TLS
tls_out.ourcert = addr->ourcert;
addr->ourcert = NULL;
tls_out.peercert = addr->peercert;
addr->peercert = NULL;
+ tls_out.ver = addr->tlsver;
tls_out.cipher = addr->cipher;
tls_out.peerdn = addr->peerdn;
tls_out.ocsp = addr->ocsp;
-# ifdef EXPERIMENTAL_DANE
+# ifdef SUPPORT_DANE
tls_out.dane_verified = testflag(addr, af_dane_verified);
# endif
#endif
delivery_log(LOG_MAIN, addr, logchar, NULL);
-#ifdef SUPPORT_TLS
- if (tls_out.ourcert)
- {
- tls_free_cert(tls_out.ourcert);
- tls_out.ourcert = NULL;
- }
- if (tls_out.peercert)
- {
- tls_free_cert(tls_out.peercert);
- tls_out.peercert = NULL;
- }
+#ifndef DISABLE_TLS
+ tls_free_cert(&tls_out.ourcert);
+ tls_free_cert(&tls_out.peercert);
+ tls_out.ver = NULL;
tls_out.cipher = NULL;
tls_out.peerdn = NULL;
tls_out.ocsp = OCSP_NOT_REQ;
-# ifdef EXPERIMENTAL_DANE
+# ifdef SUPPORT_DANE
tls_out.dane_verified = FALSE;
# endif
#endif
if (addr->special_action == SPECIAL_FREEZE)
{
- deliver_freeze = TRUE;
+ f.deliver_freeze = TRUE;
deliver_frozen_at = time(NULL);
update_spool = TRUE;
}
/* If doing a 2-stage queue run, we skip writing to either the message
log or the main log for SMTP defers. */
- if (!queue_2stage || addr->basic_errno != 0)
- {
- uschar ss[32];
-
- /* For errors of the type "retry time not reached" (also remotes skipped
- on queue run), logging is controlled by L_retry_defer. Note that this kind
- of error number is negative, and all the retry ones are less than any
- others. */
-
- unsigned int use_log_selector = (addr->basic_errno <= ERRNO_RETRY_BASE)?
- L_retry_defer : 0;
-
- /* Build up the line that is used for both the message log and the main
- log. */
-
- s = reset_point = store_get(size);
-
- /* Create the address string for logging. Must not do this earlier, because
- an OK result may be changed to FAIL when a pipe returns text. */
-
- log_address = string_log_address(addr,
- (log_write_selector & L_all_parents) != 0, result == OK);
-
- s = string_cat(s, &size, &ptr, log_address, Ustrlen(log_address));
-
- /* Either driver_name contains something and driver_kind contains
- " router" or " transport" (note the leading space), or driver_name is
- a null string and driver_kind contains "routing" without the leading
- space, if all routing has been deferred. When a domain has been held,
- so nothing has been done at all, both variables contain null strings. */
-
- if (driver_name == NULL)
- {
- if (driver_kind != NULL)
- s = string_append(s, &size, &ptr, 2, US" ", driver_kind);
- }
- else
- {
- if (driver_kind[1] == 't' && addr->router != NULL)
- s = string_append(s, &size, &ptr, 2, US" R=", addr->router->name);
- Ustrcpy(ss, " ?=");
- ss[1] = toupper(driver_kind[1]);
- s = string_append(s, &size, &ptr, 2, ss, driver_name);
- }
-
- sprintf(CS ss, " defer (%d)", addr->basic_errno);
- s = string_cat(s, &size, &ptr, ss, Ustrlen(ss));
-
- if (addr->basic_errno > 0)
- s = string_append(s, &size, &ptr, 2, US": ",
- US strerror(addr->basic_errno));
-
- if (addr->host_used)
- s = string_append(s, &size, &ptr, 5,
- US" H=", addr->host_used->name,
- US" [", addr->host_used->address, US"]");
-
- if (addr->message != NULL)
- s = string_append(s, &size, &ptr, 2, US": ", addr->message);
-
- s[ptr] = 0;
-
- /* Log the deferment in the message log, but don't clutter it
- up with retry-time defers after the first delivery attempt. */
-
- if (deliver_firsttime || addr->basic_errno > ERRNO_RETRY_BASE)
- deliver_msglog("%s %s\n", now, s);
-
- /* Write the main log and reset the store */
-
- log_write(use_log_selector, logflags, "== %s", s);
- store_reset(reset_point);
- }
+ if (!f.queue_2stage || addr->basic_errno != 0)
+ deferral_log(addr, now, logflags, driver_name, driver_kind);
}
force the af_ignore_error flag. This will cause the address to be discarded
later (with a log entry). */
- if (sender_address[0] == 0 && message_age >= ignore_bounce_errors_after)
- setflag(addr, af_ignore_error);
+ if (!*sender_address && message_age >= ignore_bounce_errors_after)
+ addr->prop.ignore_error = TRUE;
/* Freeze the message if requested, or if this is a bounce message (or other
message with null sender) and this address does not have its own errors
to ignore occurs later, instead of sending a message. Logging of freezing
occurs later, just before writing the -H file. */
- if (!testflag(addr, af_ignore_error) &&
- (addr->special_action == SPECIAL_FREEZE ||
- (sender_address[0] == 0 && addr->p.errors_address == NULL)
- ))
- {
- frozen_info = (addr->special_action == SPECIAL_FREEZE)? US"" :
- (sender_local && !local_error_message)?
- US" (message created with -f <>)" : US" (delivery error message)";
- deliver_freeze = TRUE;
+ if ( !addr->prop.ignore_error
+ && ( addr->special_action == SPECIAL_FREEZE
+ || (sender_address[0] == 0 && !addr->prop.errors_address)
+ ) )
+ {
+ frozen_info = addr->special_action == SPECIAL_FREEZE
+ ? US""
+ : f.sender_local && !f.local_error_message
+ ? US" (message created with -f <>)"
+ : US" (delivery error message)";
+ f.deliver_freeze = TRUE;
deliver_frozen_at = time(NULL);
update_spool = TRUE;
addr_failed = addr;
}
- /* Build up the log line for the message and main logs */
-
- s = reset_point = store_get(size);
-
- /* Create the address string for logging. Must not do this earlier, because
- an OK result may be changed to FAIL when a pipe returns text. */
-
- log_address = string_log_address(addr,
- (log_write_selector & L_all_parents) != 0, result == OK);
-
- s = string_cat(s, &size, &ptr, log_address, Ustrlen(log_address));
-
- if ((log_extra_selector & LX_sender_on_delivery) != 0)
- s = string_append(s, &size, &ptr, 3, US" F=<", sender_address, US">");
-
- /* Return path may not be set if no delivery actually happened */
-
- if (used_return_path != NULL &&
- (log_extra_selector & LX_return_path_on_delivery) != 0)
- s = string_append(s, &size, &ptr, 3, US" P=<", used_return_path, US">");
-
- if (addr->router != NULL)
- s = string_append(s, &size, &ptr, 2, US" R=", addr->router->name);
- if (addr->transport != NULL)
- s = string_append(s, &size, &ptr, 2, US" T=", addr->transport->name);
-
- if (addr->host_used != NULL)
- s = d_hostlog(s, &size, &ptr, addr);
-
-#ifdef SUPPORT_TLS
- s = d_tlslog(s, &size, &ptr, addr);
-#endif
-
- if (addr->basic_errno > 0)
- s = string_append(s, &size, &ptr, 2, US": ",
- US strerror(addr->basic_errno));
-
- if (addr->message != NULL)
- s = string_append(s, &size, &ptr, 2, US": ", addr->message);
-
- s[ptr] = 0;
-
- /* Do the logging. For the message log, "routing failed" for those cases,
- just to make it clearer. */
-
- if (driver_name == NULL)
- deliver_msglog("%s %s failed for %s\n", now, driver_kind, s);
- else
- deliver_msglog("%s %s\n", now, s);
-
- log_write(0, LOG_MAIN, "** %s", s);
-
-#ifdef EXPERIMENTAL_EVENT
- msg_event_raise(US"msg:fail:delivery", addr);
-#endif
-
- store_reset(reset_point);
+ failure_log(addr, driver_name ? NULL : driver_kind, now);
}
/* Ensure logging is turned on again in all cases */
-disable_logging = FALSE;
+f.disable_logging = FALSE;
}
static void
common_error(BOOL logit, address_item *addr, int code, uschar *format, ...)
{
-address_item *addr2;
addr->basic_errno = code;
-if (format != NULL)
+if (format)
{
va_list ap;
- uschar buffer[512];
+ gstring * g;
+
va_start(ap, format);
- if (!string_vformat(buffer, sizeof(buffer), CS format, ap))
- log_write(0, LOG_MAIN|LOG_PANIC_DIE,
- "common_error expansion was longer than " SIZE_T_FMT, sizeof(buffer));
+ g = string_vformat(NULL, SVFMT_EXTEND|SVFMT_REBUFFER, CS format, ap);
va_end(ap);
- addr->message = string_copy(buffer);
+ addr->message = string_from_gstring(g);
}
-for (addr2 = addr->next; addr2 != NULL; addr2 = addr2->next)
+for (address_item * addr2 = addr->next; addr2; addr2 = addr2->next)
{
addr2->basic_errno = code;
addr2->message = addr->message;
static BOOL
check_never_users(uid_t uid, uid_t *nusers)
{
-int i;
-if (nusers == NULL) return FALSE;
-for (i = 1; i <= (int)(nusers[0]); i++) if (nusers[i] == uid) return TRUE;
+if (!nusers) return FALSE;
+for (int i = 1; i <= (int)(nusers[0]); i++) if (nusers[i] == uid) return TRUE;
return FALSE;
}
findugid(address_item *addr, transport_instance *tp, uid_t *uidp, gid_t *gidp,
BOOL *igfp)
{
-uschar *nuname = NULL;
+uschar *nuname;
BOOL gid_set = FALSE;
/* Default initgroups flag comes from the transport */
*gidp = tp->gid;
gid_set = TRUE;
}
-else if (tp->expand_gid != NULL)
+else if (tp->expand_gid)
{
- if (route_find_expanded_group(tp->expand_gid, tp->name, US"transport", gidp,
- &(addr->message))) gid_set = TRUE;
- else
+ GET_OPTION("group");
+ if (!route_find_expanded_group(tp->expand_gid, tp->drinst.name, US"transport",
+ gidp, &addr->message))
{
common_error(FALSE, addr, ERRNO_GIDFAIL, NULL);
return FALSE;
}
+ gid_set = TRUE;
}
/* If the transport did not set a group, see if the router did. */
/* Otherwise, try for an expandable uid field. If it ends up as a numeric id,
it does not provide a passwd value from which a gid can be taken. */
-else if (tp->expand_uid != NULL)
+else if (tp->expand_uid)
{
struct passwd *pw;
- if (!route_find_expanded_user(tp->expand_uid, tp->name, US"transport", &pw,
- uidp, &(addr->message)))
+ GET_OPTION("user");
+ if (!route_find_expanded_user(tp->expand_uid, tp->drinst.name, US"transport",
+ &pw, uidp, &(addr->message)))
{
common_error(FALSE, addr, ERRNO_UIDFAIL, NULL);
return FALSE;
}
- if (!gid_set && pw != NULL)
+ if (!gid_set && pw)
{
*gidp = pw->pw_gid;
gid_set = TRUE;
if (!gid_set)
{
common_error(TRUE, addr, ERRNO_GIDFAIL, US"User set without group for "
- "%s transport", tp->name);
+ "%s transport", tp->drinst.name);
return FALSE;
}
/* Check that the uid is not on the lists of banned uids that may not be used
for delivery processes. */
-if (check_never_users(*uidp, never_users))
- nuname = US"never_users";
-else if (check_never_users(*uidp, fixed_never_users))
- nuname = US"fixed_never_users";
-
-if (nuname != NULL)
+nuname = check_never_users(*uidp, never_users)
+ ? US"never_users"
+ : check_never_users(*uidp, fixed_never_users)
+ ? US"fixed_never_users"
+ : NULL;
+if (nuname)
{
common_error(TRUE, addr, ERRNO_UIDFAIL, US"User %ld set for %s transport "
- "is on the %s list", (long int)(*uidp), tp->name, nuname);
+ "is on the %s list", (long int)(*uidp), tp->drinst.name, nuname);
return FALSE;
}
int rc = OK;
int size_limit;
+GET_OPTION("message_size_limit");
deliver_set_expansions(addr);
size_limit = expand_string_integer(tp->message_size_limit, TRUE);
deliver_set_expansions(NULL);
-if (expand_string_message != NULL)
+if (expand_string_message)
{
rc = DEFER;
- if (size_limit == -1)
- addr->message = string_sprintf("failed to expand message_size_limit "
- "in %s transport: %s", tp->name, expand_string_message);
- else
- addr->message = string_sprintf("invalid message_size_limit "
- "in %s transport: %s", tp->name, expand_string_message);
+ addr->message = size_limit == -1
+ ? string_sprintf("failed to expand message_size_limit "
+ "in %s transport: %s", tp->drinst.name, expand_string_message)
+ : string_sprintf("invalid message_size_limit "
+ "in %s transport: %s", tp->drinst.name, expand_string_message);
}
else if (size_limit > 0 && message_size > size_limit)
{
static BOOL
previously_transported(address_item *addr, BOOL testing)
{
-(void)string_format(big_buffer, big_buffer_size, "%s/%s",
- addr->unique + (testflag(addr, af_homonym)? 3:0), addr->transport->name);
+uschar * s = string_sprintf("%s/%s",
+ addr->unique + (testflag(addr, af_homonym) ? 3:0),
+ addr->transport->drinst.name);
-if (tree_search(tree_nonrecipients, big_buffer) != 0)
+if (tree_search(tree_nonrecipients, s) != 0)
{
DEBUG(D_deliver|D_route|D_transport)
debug_printf("%s was previously delivered (%s transport): discarded\n",
- addr->address, addr->transport->name);
+ addr->address, addr->transport->drinst.name);
if (!testing) child_done(addr, tod_stamp(tod_log));
return TRUE;
}
/* Each local delivery is performed in a separate process which sets its
uid and gid as specified. This is a safer way than simply changing and
-restoring using seteuid(); there is a body of opinion that seteuid() cannot be
-used safely. From release 4, Exim no longer makes any use of it. Besides, not
-all systems have seteuid().
+restoring using seteuid(); there is a body of opinion that seteuid()
+cannot be used safely. From release 4, Exim no longer makes any use of
+it for delivery. Besides, not all systems have seteuid().
If the uid/gid are specified in the transport_instance, they are used; the
transport initialization must ensure that either both or neither are set.
Returns: nothing
*/
-static void
+void
deliver_local(address_item *addr, BOOL shadowing)
{
BOOL use_initgroups;
pid_t pid;
uschar *working_directory;
address_item *addr2;
-transport_instance *tp = addr->transport;
+transport_instance * tp = addr->transport;
+const uschar * trname = tp->drinst.name;
/* Set up the return path from the errors or sender address. If the transport
has its own return path setting, expand it and replace the existing value. */
-if(addr->p.errors_address != NULL)
- return_path = addr->p.errors_address;
-#ifdef EXPERIMENTAL_SRS
-else if(addr->p.srs_sender != NULL)
- return_path = addr->p.srs_sender;
-#endif
+if(addr->prop.errors_address)
+ return_path = addr->prop.errors_address;
else
return_path = sender_address;
-if (tp->return_path != NULL)
+GET_OPTION("return_path");
+if (tp->return_path)
{
- uschar *new_return_path = expand_string(tp->return_path);
- if (new_return_path == NULL)
- {
- if (!expand_string_forcedfail)
- {
- common_error(TRUE, addr, ERRNO_EXPANDFAIL,
- US"Failed to expand return path \"%s\" in %s transport: %s",
- tp->return_path, tp->name, expand_string_message);
- return;
- }
+ uschar * new_return_path = expand_string(tp->return_path);
+ if (new_return_path)
+ return_path = new_return_path;
+ else if (!f.expand_string_forcedfail)
+ {
+ common_error(TRUE, addr, ERRNO_EXPANDFAIL,
+ US"Failed to expand return path \"%s\" in %s transport: %s",
+ tp->return_path, trname, expand_string_message);
+ return;
}
- else return_path = new_return_path;
}
/* For local deliveries, one at a time, the value used for logging can just be
home directory set in the address may already be expanded; a flag is set to
indicate that. In other cases we must expand it. */
-if ((deliver_home = tp->home_dir) != NULL || /* Set in transport, or */
- ((deliver_home = addr->home_dir) != NULL && /* Set in address and */
- !testflag(addr, af_home_expanded))) /* not expanded */
+GET_OPTION("home_directory");
+if ( (deliver_home = tp->home_dir) /* Set in transport, or */
+ || ( (deliver_home = addr->home_dir) /* Set in address and */
+ && !testflag(addr, af_home_expanded) /* not expanded */
+ ) )
{
uschar *rawhome = deliver_home;
deliver_home = NULL; /* in case it contains $home */
- deliver_home = expand_string(rawhome);
- if (deliver_home == NULL)
+ if (!(deliver_home = expand_string(rawhome)))
{
common_error(TRUE, addr, ERRNO_EXPANDFAIL, US"home directory \"%s\" failed "
- "to expand for %s transport: %s", rawhome, tp->name,
+ "to expand for %s transport: %s", rawhome, trname,
expand_string_message);
return;
}
if (*deliver_home != '/')
{
common_error(TRUE, addr, ERRNO_NOTABSOLUTE, US"home directory path \"%s\" "
- "is not absolute for %s transport", deliver_home, tp->name);
+ "is not absolute for %s transport", deliver_home, trname);
return;
}
}
operating systems when running pipes, as some commands (e.g. "rm" under Solaris
2.5) require this. */
-working_directory = (tp->current_dir != NULL)?
- tp->current_dir : addr->current_dir;
-
-if (working_directory != NULL)
+GET_OPTION("current_directory");
+working_directory = tp->current_dir ? tp->current_dir : addr->current_dir;
+if (working_directory)
{
uschar *raw = working_directory;
- working_directory = expand_string(raw);
- if (working_directory == NULL)
+ if (!(working_directory = expand_string(raw)))
{
common_error(TRUE, addr, ERRNO_EXPANDFAIL, US"current directory \"%s\" "
- "failed to expand for %s transport: %s", raw, tp->name,
+ "failed to expand for %s transport: %s", raw, trname,
expand_string_message);
return;
}
if (*working_directory != '/')
{
common_error(TRUE, addr, ERRNO_NOTABSOLUTE, US"current directory path "
- "\"%s\" is not absolute for %s transport", working_directory, tp->name);
+ "\"%s\" is not absolute for %s transport", working_directory, trname);
return;
}
}
-else working_directory = (deliver_home == NULL)? US"/" : deliver_home;
+else working_directory = deliver_home ? deliver_home : US"/";
/* If one of the return_output flags is set on the transport, create and open a
file in the message log directory for the transport to write its output onto.
This is mainly used by pipe transports. The file needs to be unique to the
address. This feature is not available for shadow transports. */
-if (!shadowing && (tp->return_output || tp->return_fail_output ||
- tp->log_output || tp->log_fail_output))
+if ( !shadowing
+ && ( tp->return_output || tp->return_fail_output
+ || tp->log_output || tp->log_fail_output || tp->log_defer_output
+ ) )
{
- uschar *error;
+ uschar * error;
+
addr->return_filename =
- string_sprintf("%s/msglog/%s/%s-%d-%d", spool_directory, message_subdir,
- message_id, getpid(), return_count++);
- addr->return_file = open_msglog_file(addr->return_filename, 0400, &error);
- if (addr->return_file < 0)
+ spool_fname(US"msglog", message_subdir, message_id,
+ string_sprintf("-%ld-%d", (long)getpid(), return_count++));
+
+ if ((addr->return_file = open_msglog_file(addr->return_filename, 0400, &error)) < 0)
{
common_error(TRUE, addr, errno, US"Unable to %s file for %s transport "
- "to return message: %s", error, tp->name, strerror(errno));
+ "to return message: %s", error, trname, strerror(errno));
return;
}
}
search_tidyup();
-if ((pid = fork()) == 0)
+if ((pid = exim_fork(US"delivery-local")) == 0)
{
BOOL replicate = TRUE;
privileged. (Appendfile uses this to expand quota, for example, while
able to read private files.) */
- if (addr->transport->setup != NULL)
- {
+ if (addr->transport->setup)
switch((addr->transport->setup)(addr->transport, addr, NULL, uid, gid,
- &(addr->message)))
+ &addr->message))
{
case DEFER:
- addr->transport_return = DEFER;
- goto PASS_BACK;
+ addr->transport_return = DEFER;
+ goto PASS_BACK;
case FAIL:
- addr->transport_return = PANIC;
- goto PASS_BACK;
+ addr->transport_return = PANIC;
+ goto PASS_BACK;
}
- }
/* Ignore SIGINT and SIGTERM during delivery. Also ignore SIGUSR1, as
when the process becomes unprivileged, it won't be able to write to the
FD_CLOEXEC);
exim_setugid(uid, gid, use_initgroups,
string_sprintf("local delivery to %s <%s> transport=%s", addr->local_part,
- addr->address, addr->transport->name));
+ addr->address, addr->transport->drinst.name));
DEBUG(D_deliver)
{
- address_item *batched;
debug_printf(" home=%s current=%s\n", deliver_home, working_directory);
- for (batched = addr->next; batched != NULL; batched = batched->next)
+ for (address_item * batched = addr->next; batched; batched = batched->next)
debug_printf("additional batched address: %s\n", batched->address);
}
{
BOOL ok = TRUE;
set_process_info("delivering %s to %s using %s", message_id,
- addr->local_part, addr->transport->name);
+ addr->local_part, trname);
- /* Setting this global in the subprocess means we need never clear it */
- transport_name = addr->transport->name;
+ /* Setting these globals in the subprocess means we need never clear them */
+
+ transport_name = trname;
+ if (addr->router) router_name = addr->router->drinst.name;
+ driver_srcfile = tp->drinst.srcfile;
+ driver_srcline = tp->drinst.srcline;
/* If a transport filter has been specified, set up its argument list.
Any errors will get put into the address, and FALSE yielded. */
- if (addr->transport->filter_command != NULL)
+ if (tp->filter_command)
{
ok = transport_set_up_command(&transport_filter_argv,
- addr->transport->filter_command,
- TRUE, PANIC, addr, US"transport filter", NULL);
- transport_filter_timeout = addr->transport->filter_timeout;
+ tp->filter_command,
+ TSUC_EXPAND_ARGS, PANIC, addr, US"transport filter", NULL);
+ transport_filter_timeout = tp->filter_timeout;
}
else transport_filter_argv = NULL;
if (ok)
{
- debug_print_string(addr->transport->debug_string);
- replicate = !(addr->transport->info->code)(addr->transport, addr);
+ transport_info * ti = tp->drinst.info;
+ debug_print_string(tp->debug_string);
+ replicate = !(ti->code)(addr->transport, addr);
}
}
PASS_BACK:
if (replicate) replicate_status(addr);
- for (addr2 = addr; addr2 != NULL; addr2 = addr2->next)
+ for (addr2 = addr; addr2; addr2 = addr2->next)
{
int i;
int local_part_length = Ustrlen(addr2->local_part);
uschar *s;
int ret;
- if( (ret = write(pfd[pipe_write], (void *)&(addr2->transport_return), sizeof(int))) != sizeof(int)
- || (ret = write(pfd[pipe_write], (void *)&transport_count, sizeof(transport_count))) != sizeof(transport_count)
- || (ret = write(pfd[pipe_write], (void *)&(addr2->flags), sizeof(addr2->flags))) != sizeof(addr2->flags)
- || (ret = write(pfd[pipe_write], (void *)&(addr2->basic_errno), sizeof(int))) != sizeof(int)
- || (ret = write(pfd[pipe_write], (void *)&(addr2->more_errno), sizeof(int))) != sizeof(int)
- || (ret = write(pfd[pipe_write], (void *)&(addr2->special_action), sizeof(int))) != sizeof(int)
- || (ret = write(pfd[pipe_write], (void *)&(addr2->transport),
+ if( (i = addr2->transport_return, (ret = write(pfd[pipe_write], &i, sizeof(int))) != sizeof(int))
+ || (ret = write(pfd[pipe_write], &transport_count, sizeof(transport_count))) != sizeof(transport_count)
+ || (ret = write(pfd[pipe_write], &addr2->flags, sizeof(addr2->flags))) != sizeof(addr2->flags)
+ || (ret = write(pfd[pipe_write], &addr2->basic_errno, sizeof(int))) != sizeof(int)
+ || (ret = write(pfd[pipe_write], &addr2->more_errno, sizeof(int))) != sizeof(int)
+ || (ret = write(pfd[pipe_write], &addr2->delivery_time, sizeof(struct timeval))) != sizeof(struct timeval)
+ || (i = addr2->special_action, (ret = write(pfd[pipe_write], &i, sizeof(int))) != sizeof(int))
+ || (ret = write(pfd[pipe_write], &addr2->transport,
sizeof(transport_instance *))) != sizeof(transport_instance *)
/* For a file delivery, pass back the local part, in case the original
logging. */
|| (testflag(addr2, af_file)
- && ( (ret = write(pfd[pipe_write], (void *)&local_part_length, sizeof(int))) != sizeof(int)
+ && ( (ret = write(pfd[pipe_write], &local_part_length, sizeof(int))) != sizeof(int)
|| (ret = write(pfd[pipe_write], addr2->local_part, local_part_length)) != local_part_length
)
)
)
- log_write(0, LOG_MAIN|LOG_PANIC, "Failed writing transport results to pipe: %s\n",
+ log_write(0, LOG_MAIN|LOG_PANIC, "Failed writing transport results to pipe: %s",
ret == -1 ? strerror(errno) : "short write");
/* Now any messages */
for (i = 0, s = addr2->message; i < 2; i++, s = addr2->user_message)
{
- int message_length = (s == NULL)? 0 : Ustrlen(s) + 1;
- if( (ret = write(pfd[pipe_write], (void *)&message_length, sizeof(int))) != sizeof(int)
- || (message_length > 0 && (ret = write(pfd[pipe_write], s, message_length)) != message_length)
+ int message_length = s ? Ustrlen(s) + 1 : 0;
+ if( (ret = write(pfd[pipe_write], &message_length, sizeof(int))) != sizeof(int)
+ || message_length > 0 && (ret = write(pfd[pipe_write], s, message_length)) != message_length
)
- log_write(0, LOG_MAIN|LOG_PANIC, "Failed writing transport results to pipe: %s\n",
+ log_write(0, LOG_MAIN|LOG_PANIC, "Failed writing transport results to pipe: %s",
ret == -1 ? strerror(errno) : "short write");
}
}
and close the pipe we were writing down before exiting. */
(void)close(pfd[pipe_write]);
- search_tidyup();
- exit(EXIT_SUCCESS);
+ exim_exit(EXIT_SUCCESS);
}
/* Back in the main process: panic if the fork did not succeed. This seems
(void)close(pfd[pipe_write]);
-for (addr2 = addr; addr2 != NULL; addr2 = addr2->next)
+for (addr2 = addr; addr2; addr2 = addr2->next)
{
- len = read(pfd[pipe_read], (void *)&status, sizeof(int));
- if (len > 0)
+ if ((len = read(pfd[pipe_read], &status, sizeof(int))) > 0)
{
int i;
uschar **sptr;
addr2->transport_return = status;
- len = read(pfd[pipe_read], (void *)&transport_count,
+ len = read(pfd[pipe_read], &transport_count,
sizeof(transport_count));
- len = read(pfd[pipe_read], (void *)&(addr2->flags), sizeof(addr2->flags));
- len = read(pfd[pipe_read], (void *)&(addr2->basic_errno), sizeof(int));
- len = read(pfd[pipe_read], (void *)&(addr2->more_errno), sizeof(int));
- len = read(pfd[pipe_read], (void *)&(addr2->special_action), sizeof(int));
- len = read(pfd[pipe_read], (void *)&(addr2->transport),
+ len = read(pfd[pipe_read], &addr2->flags, sizeof(addr2->flags));
+ len = read(pfd[pipe_read], &addr2->basic_errno, sizeof(int));
+ len = read(pfd[pipe_read], &addr2->more_errno, sizeof(int));
+ len = read(pfd[pipe_read], &addr2->delivery_time, sizeof(struct timeval));
+ len = read(pfd[pipe_read], &i, sizeof(int)); addr2->special_action = i;
+ len = read(pfd[pipe_read], &addr2->transport,
sizeof(transport_instance *));
if (testflag(addr2, af_file))
{
- int local_part_length;
- len = read(pfd[pipe_read], (void *)&local_part_length, sizeof(int));
- len = read(pfd[pipe_read], (void *)big_buffer, local_part_length);
- big_buffer[local_part_length] = 0;
+ int llen;
+ if ( read(pfd[pipe_read], &llen, sizeof(int)) != sizeof(int)
+ || llen > 64*4 /* limit from rfc 5821, times I18N factor */
+ )
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "bad local_part length read"
+ " from delivery subprocess");
+ break;
+ }
+ /* sanity-checked llen so disable the Coverity error */
+ /* coverity[tainted_data] */
+ if (read(pfd[pipe_read], big_buffer, llen) != llen)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "bad local_part read"
+ " from delivery subprocess");
+ break;
+ }
+ big_buffer[llen] = 0;
addr2->local_part = string_copy(big_buffer);
}
- for (i = 0, sptr = &(addr2->message); i < 2;
- i++, sptr = &(addr2->user_message))
+ for (i = 0, sptr = &addr2->message; i < 2; i++, sptr = &addr2->user_message)
{
int message_length;
- len = read(pfd[pipe_read], (void *)&message_length, sizeof(int));
+ len = read(pfd[pipe_read], &message_length, sizeof(int));
if (message_length > 0)
{
- len = read(pfd[pipe_read], (void *)big_buffer, message_length);
+ len = read(pfd[pipe_read], big_buffer, message_length);
+ big_buffer[big_buffer_size-1] = '\0'; /* guard byte */
if (len > 0) *sptr = string_copy(big_buffer);
}
}
if (!shadowing)
{
- for (addr2 = addr; addr2 != NULL; addr2 = addr2->next)
- {
- if (addr2->transport_return != OK) continue;
-
- if (testflag(addr2, af_homonym))
- sprintf(CS big_buffer, "%.500s/%s\n", addr2->unique + 3, tp->name);
- else
- sprintf(CS big_buffer, "%.500s\n", addr2->unique);
+ for (addr2 = addr; addr2; addr2 = addr2->next)
+ if (addr2->transport_return == OK)
+ {
+ if (testflag(addr2, af_homonym))
+ sprintf(CS big_buffer, "%.500s/%s\n", addr2->unique + 3, trname);
+ else
+ sprintf(CS big_buffer, "%.500s\n", addr2->unique);
- /* In the test harness, wait just a bit to let the subprocess finish off
- any debug output etc first. */
+ /* In the test harness, wait just a bit to let the subprocess finish off
+ any debug output etc first. */
- if (running_in_test_harness) millisleep(300);
+ testharness_pause_ms(300);
- DEBUG(D_deliver) debug_printf("journalling %s", big_buffer);
- len = Ustrlen(big_buffer);
- if (write(journal_fd, big_buffer, len) != len)
- log_write(0, LOG_MAIN|LOG_PANIC, "failed to update journal for %s: %s",
- big_buffer, strerror(errno));
- }
+ DEBUG(D_deliver) debug_printf("journalling %s", big_buffer);
+ len = Ustrlen(big_buffer);
+ if (write(journal_fd, big_buffer, len) != len)
+ log_write(0, LOG_MAIN|LOG_PANIC, "failed to update journal for %s: %s",
+ big_buffer, strerror(errno));
+ }
/* Ensure the journal file is pushed out to disk. */
resets SIGCHLD to SIG_DFL, but this code should still be robust. */
while ((rc = wait(&status)) != pid)
- {
if (rc < 0 && errno == ECHILD) /* Process has vanished */
{
log_write(0, LOG_MAIN, "%s transport process vanished unexpectedly",
- addr->transport->driver_name);
+ addr->transport->drinst.driver_name);
status = 0;
break;
}
- }
if ((status & 0xffff) != 0)
{
addr->special_action = SPECIAL_FREEZE;
log_write(0, LOG_MAIN|LOG_PANIC, "%s transport process returned non-zero "
"status 0x%04x: %s %d",
- addr->transport->driver_name,
+ addr->transport->drinst.driver_name,
status,
- (msb == 0)? "terminated by signal" : "exit code",
+ msb == 0 ? "terminated by signal" : "exit code",
code);
}
/* If SPECIAL_WARN is set in the top address, send a warning message. */
-if (addr->special_action == SPECIAL_WARN &&
- addr->transport->warn_message != NULL)
+if (addr->special_action == SPECIAL_WARN)
{
- int fd;
- uschar *warn_message;
+ uschar * warn_message = addr->transport->warn_message;
+ GET_OPTION("quota_warn_message");
+ if (warn_message)
+ {
+ int fd;
+ pid_t pid;
- DEBUG(D_deliver) debug_printf("Warning message requested by transport\n");
+ DEBUG(D_deliver) debug_printf("Warning message requested by transport\n");
- warn_message = expand_string(addr->transport->warn_message);
- if (warn_message == NULL)
- log_write(0, LOG_MAIN|LOG_PANIC, "Failed to expand \"%s\" (warning "
- "message for %s transport): %s", addr->transport->warn_message,
- addr->transport->name, expand_string_message);
- else
- {
- pid_t pid = child_open_exim(&fd);
- if (pid > 0)
+ if (!(warn_message = expand_string(warn_message)))
+ log_write(0, LOG_MAIN|LOG_PANIC, "Failed to expand \"%s\" (warning "
+ "message for %s transport): %s", addr->transport->warn_message,
+ addr->transport->drinst.name, expand_string_message);
+
+ else if ((pid = child_open_exim(&fd, US"tpt-warning-message")) > 0)
{
- FILE *f = fdopen(fd, "wb");
- if (errors_reply_to != NULL &&
- !contains_header(US"Reply-To", warn_message))
- fprintf(f, "Reply-To: %s\n", errors_reply_to);
+ FILE * f = fdopen(fd, "wb");
+ if (errors_reply_to && !contains_header(US"Reply-To", warn_message))
+ fprintf(f, "Reply-To: %s\n", errors_reply_to);
fprintf(f, "Auto-Submitted: auto-replied\n");
- if (!contains_header(US"From", warn_message)) moan_write_from(f);
+ if (!contains_header(US"From", warn_message))
+ moan_write_from(f);
fprintf(f, "%s", CS warn_message);
/* Close and wait for child process to complete, without a timeout. */
(void)fclose(f);
(void)child_close(pid, 0);
}
+
+ addr->special_action = SPECIAL_NONE;
}
+ }
+}
+
- addr->special_action = SPECIAL_NONE;
+
+
+/* Check transport for the given concurrency limit. Return TRUE if over
+the limit (or an expansion failure), else FALSE and if there was a limit,
+the key for the hints database used for the concurrency count. */
+
+static BOOL
+tpt_parallel_check(transport_instance * tp, address_item * addr, uschar ** key)
+{
+const uschar * trname = tp->drinst.name;
+unsigned max_parallel;
+
+GET_OPTION("max_parallel");
+if (!tp->max_parallel) return FALSE;
+
+max_parallel = (unsigned) expand_string_integer(tp->max_parallel, TRUE);
+if (expand_string_message)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "Failed to expand max_parallel option "
+ "in %s transport (%s): %s", trname, addr->address,
+ expand_string_message);
+ return TRUE;
+ }
+
+if (max_parallel > 0)
+ {
+ uschar * serialize_key = string_sprintf("tpt-serialize-%s", trname);
+ if (!enq_start(serialize_key, max_parallel))
+ {
+ address_item * next;
+ DEBUG(D_transport)
+ debug_printf("skipping tpt %s because concurrency limit %u reached\n",
+ trname, max_parallel);
+ do
+ {
+ next = addr->next;
+ addr->message = US"concurrency limit reached for transport";
+ addr->basic_errno = ERRNO_TRETRY;
+ post_process_one(addr, DEFER, LOG_MAIN, EXIM_DTYPE_TRANSPORT, 0);
+ } while ((addr = next));
+ return TRUE;
+ }
+ *key = serialize_key;
}
+return FALSE;
}
static void
do_local_deliveries(void)
{
-open_db dbblock;
-open_db *dbm_file = NULL;
+open_db dbblock, * dbm_file = NULL;
time_t now = time(NULL);
/* Loop until we have exhausted the supply of local deliveries */
-while (addr_local != NULL)
+while (addr_local)
{
- time_t delivery_start;
- int deliver_time;
+ struct timeval delivery_start;
+ struct timeval deliver_time;
address_item *addr2, *addr3, *nextaddr;
int logflags = LOG_MAIN;
- int logchar = dont_deliver? '*' : '=';
- transport_instance *tp;
+ int logchar = f.dont_deliver? '*' : '=';
+ transport_instance * tp;
+ uschar * serialize_key = NULL;
+ const uschar * trname;
/* Pick the first undelivered address off the chain */
/* An internal disaster if there is no transport. Should not occur! */
- if ((tp = addr->transport) == NULL)
+ if (!(tp = addr->transport))
{
logflags |= LOG_PANIC;
- disable_logging = FALSE; /* Jic */
- addr->message =
- (addr->router != NULL)?
- string_sprintf("No transport set by %s router", addr->router->name)
- :
- string_sprintf("No transport set by system filter");
- post_process_one(addr, DEFER, logflags, DTYPE_TRANSPORT, 0);
+ f.disable_logging = FALSE; /* Jic */
+ addr->message = addr->router
+ ? string_sprintf("No transport set by %s router", addr->router->drinst.name)
+ : US"No transport set by system filter";
+ post_process_one(addr, DEFER, logflags, EXIM_DTYPE_TRANSPORT, 0);
continue;
}
+ trname = tp->drinst.name;
/* Check that this base address hasn't previously been delivered to this
transport. The check is necessary at this point to handle homonymic addresses
/* There are weird cases where logging is disabled */
- disable_logging = tp->disable_logging;
+ f.disable_logging = tp->disable_logging;
/* Check for batched addresses and possible amalgamation. Skip all the work
if either batch_max <= 1 or there aren't any other addresses for local
delivery. */
- if (tp->batch_max > 1 && addr_local != NULL)
+ if (tp->batch_max > 1 && addr_local)
{
int batch_count = 1;
BOOL uses_dom = readconf_depends((driver_instance *)tp, US"domain");
- BOOL uses_lp = (testflag(addr, af_pfr) &&
- (testflag(addr, af_file) || addr->local_part[0] == '|')) ||
- readconf_depends((driver_instance *)tp, US"local_part");
+ BOOL uses_lp = ( testflag(addr, af_pfr)
+ && (testflag(addr, af_file) || addr->local_part[0] == '|')
+ )
+ || readconf_depends((driver_instance *)tp, US"local_part");
uschar *batch_id = NULL;
address_item **anchor = &addr_local;
address_item *last = addr;
/* Expand the batch_id string for comparison with other addresses.
Expansion failure suppresses batching. */
- if (tp->batch_id != NULL)
+ GET_OPTION("batch_id");
+ if (tp->batch_id)
{
deliver_set_expansions(addr);
batch_id = expand_string(tp->batch_id);
deliver_set_expansions(NULL);
- if (batch_id == NULL)
+ if (!batch_id)
{
log_write(0, LOG_MAIN|LOG_PANIC, "Failed to expand batch_id option "
- "in %s transport (%s): %s", tp->name, addr->address,
+ "in %s transport (%s): %s", trname, addr->address,
expand_string_message);
batch_count = tp->batch_max;
}
same first host if a host list is set
*/
- while ((next = *anchor) != NULL && batch_count < tp->batch_max)
+ while ((next = *anchor) && batch_count < tp->batch_max)
{
BOOL ok =
- tp == next->transport &&
- !previously_transported(next, TRUE) &&
- (addr->flags & (af_pfr|af_file)) == (next->flags & (af_pfr|af_file)) &&
- (!uses_lp || Ustrcmp(next->local_part, addr->local_part) == 0) &&
- (!uses_dom || Ustrcmp(next->domain, addr->domain) == 0) &&
- same_strings(next->p.errors_address, addr->p.errors_address) &&
- same_headers(next->p.extra_headers, addr->p.extra_headers) &&
- same_strings(next->p.remove_headers, addr->p.remove_headers) &&
- same_ugid(tp, addr, next) &&
- ((addr->host_list == NULL && next->host_list == NULL) ||
- (addr->host_list != NULL && next->host_list != NULL &&
- Ustrcmp(addr->host_list->name, next->host_list->name) == 0));
+ tp == next->transport
+ && !previously_transported(next, TRUE)
+ && testflag(addr, af_pfr) == testflag(next, af_pfr)
+ && testflag(addr, af_file) == testflag(next, af_file)
+ && (!uses_lp || Ustrcmp(next->local_part, addr->local_part) == 0)
+ && (!uses_dom || Ustrcmp(next->domain, addr->domain) == 0)
+ && same_strings(next->prop.errors_address, addr->prop.errors_address)
+ && same_headers(next->prop.extra_headers, addr->prop.extra_headers)
+ && same_strings(next->prop.remove_headers, addr->prop.remove_headers)
+ && same_ugid(tp, addr, next)
+ && ( !addr->host_list && !next->host_list
+ || addr->host_list
+ && next->host_list
+ && Ustrcmp(addr->host_list->name, next->host_list->name) == 0
+ );
/* If the transport has a batch_id setting, batch_id will be non-NULL
from the expansion outside the loop. Expand for this address and compare.
Expansion failure makes this address ineligible for batching. */
- if (ok && batch_id != NULL)
+ if (ok && batch_id)
{
- uschar *bid;
- address_item *save_nextnext = next->next;
+ uschar * bid;
+ address_item * save_nextnext = next->next;
next->next = NULL; /* Expansion for a single address */
deliver_set_expansions(next);
next->next = save_nextnext;
+ GET_OPTION("batch_id");
bid = expand_string(tp->batch_id);
deliver_set_expansions(NULL);
- if (bid == NULL)
+ if (!bid)
{
log_write(0, LOG_MAIN|LOG_PANIC, "Failed to expand batch_id option "
- "in %s transport (%s): %s", tp->name, next->address,
+ "in %s transport (%s): %s", trname, next->address,
expand_string_message);
ok = FALSE;
}
last = next;
batch_count++;
}
- else anchor = &(next->next); /* Skip the address */
+ else anchor = &next->next; /* Skip the address */
}
}
fail them all forthwith. If the expansion fails, or does not yield an
integer, defer delivery. */
- if (tp->message_size_limit != NULL)
+ if (tp->message_size_limit)
{
int rc = check_message_size(tp, addr);
if (rc != OK)
{
replicate_status(addr);
- while (addr != NULL)
+ while (addr)
{
addr2 = addr->next;
- post_process_one(addr, rc, logflags, DTYPE_TRANSPORT, 0);
+ post_process_one(addr, rc, logflags, EXIM_DTYPE_TRANSPORT, 0);
addr = addr2;
}
continue; /* With next batch of addresses */
of these checks, rather than for all local deliveries, because some local
deliveries (e.g. to pipes) can take a substantial time. */
- dbm_file = dbfn_open(US"retry", O_RDONLY, &dbblock, FALSE);
- if (dbm_file == NULL)
+ if (continue_retry_db && continue_retry_db != (open_db *)-1)
{
+ DEBUG(D_hints_lookup) debug_printf("using cached retry hintsdb handle\n");
+ dbm_file = continue_retry_db;
+ }
+ else if (!(dbm_file = dbfn_open(US"retry", O_RDONLY, &dbblock, FALSE, TRUE)))
DEBUG(D_deliver|D_retry|D_hints_lookup)
debug_printf("no retry data available\n");
- }
addr2 = addr;
addr3 = NULL;
- while (addr2 != NULL)
+ while (addr2)
{
BOOL ok = TRUE; /* to deliver this address */
- uschar *retry_key;
-
- /* Set up the retry key to include the domain or not, and change its
- leading character from "R" to "T". Must make a copy before doing this,
- because the old key may be pointed to from a "delete" retry item after
- a routing delay. */
-
- retry_key = string_copy(
- (tp->retry_use_local_part)? addr2->address_retry_key :
- addr2->domain_retry_key);
- *retry_key = 'T';
-
- /* Inspect the retry data. If there is no hints file, delivery happens. */
- if (dbm_file != NULL)
+ if (f.queue_2stage)
{
- dbdata_retry *retry_record = dbfn_read(dbm_file, retry_key);
-
- /* If there is no retry record, delivery happens. If there is,
- remember it exists so it can be deleted after a successful delivery. */
-
- if (retry_record != NULL)
- {
- setflag(addr2, af_lt_retry_exists);
-
- /* A retry record exists for this address. If queue running and not
- forcing, inspect its contents. If the record is too old, or if its
- retry time has come, or if it has passed its cutoff time, delivery
- will go ahead. */
+ DEBUG(D_deliver)
+ debug_printf_indent("no router retry check (ph1 qrun)\n");
+ }
+ else
+ {
+ /* Set up the retry key to include the domain or not, and change its
+ leading character from "R" to "T". Must make a copy before doing this,
+ because the old key may be pointed to from a "delete" retry item after
+ a routing delay. */
+ uschar * retry_key = string_copy(tp->retry_use_local_part
+ ? addr2->address_retry_key : addr2->domain_retry_key);
+ *retry_key = 'T';
- DEBUG(D_retry)
- {
- debug_printf("retry record exists: age=%s ",
- readconf_printtime(now - retry_record->time_stamp));
- debug_printf("(max %s)\n", readconf_printtime(retry_data_expire));
- debug_printf(" time to retry = %s expired = %d\n",
- readconf_printtime(retry_record->next_try - now),
- retry_record->expired);
- }
+ /* Inspect the retry data. If there is no hints file, delivery happens. */
- if (queue_running && !deliver_force)
- {
- ok = (now - retry_record->time_stamp > retry_data_expire) ||
- (now >= retry_record->next_try) ||
- retry_record->expired;
+ if (dbm_file)
+ {
+ dbdata_retry * retry_record = dbfn_read(dbm_file, retry_key);
- /* If we haven't reached the retry time, there is one more check
- to do, which is for the ultimate address timeout. */
+ /* If there is no retry record, delivery happens. If there is,
+ remember it exists so it can be deleted after a successful delivery. */
- if (!ok)
- ok = retry_ultimate_address_timeout(retry_key, addr2->domain,
- retry_record, now);
- }
- }
- else DEBUG(D_retry) debug_printf("no retry record exists\n");
+ if (retry_record)
+ {
+ setflag(addr2, af_lt_retry_exists);
+
+ /* A retry record exists for this address. If queue running and not
+ forcing, inspect its contents. If the record is too old, or if its
+ retry time has come, or if it has passed its cutoff time, delivery
+ will go ahead. */
+
+ DEBUG(D_retry)
+ {
+ debug_printf("retry record exists: age=%s ",
+ readconf_printtime(now - retry_record->time_stamp));
+ debug_printf("(max %s)\n", readconf_printtime(retry_data_expire));
+ debug_printf(" time to retry = %s expired = %d\n",
+ readconf_printtime(retry_record->next_try - now),
+ retry_record->expired);
+ }
+
+ if (f.queue_running && !f.deliver_force)
+ {
+ ok = (now - retry_record->time_stamp > retry_data_expire)
+ || (now >= retry_record->next_try)
+ || retry_record->expired;
+
+ /* If we haven't reached the retry time, there is one more check
+ to do, which is for the ultimate address timeout. */
+
+ if (!ok)
+ ok = retry_ultimate_address_timeout(retry_key, addr2->domain,
+ retry_record, now);
+ }
+ }
+ else DEBUG(D_retry) debug_printf("no retry record exists\n");
+ }
}
/* This address is to be delivered. Leave it on the chain. */
address_item *this = addr2;
this->message = US"Retry time not yet reached";
this->basic_errno = ERRNO_LRETRY;
- if (addr3 == NULL) addr2 = addr = addr2->next;
- else addr2 = addr3->next = addr2->next;
- post_process_one(this, DEFER, logflags, DTYPE_TRANSPORT, 0);
+ addr2 = addr3 ? (addr3->next = addr2->next)
+ : (addr = addr2->next);
+ post_process_one(this, DEFER, logflags, EXIM_DTYPE_TRANSPORT, 0);
}
}
- if (dbm_file != NULL) dbfn_close(dbm_file);
+ if (dbm_file)
+ if (dbm_file != continue_retry_db)
+ { dbfn_close(dbm_file); dbm_file = NULL; }
+ else
+ DEBUG(D_hints_lookup) debug_printf("retaining retry hintsdb handle\n");
/* If there are no addresses left on the chain, they all deferred. Loop
for the next set of addresses. */
- if (addr == NULL) continue;
+ if (!addr) continue;
+
+ /* If the transport is limited for parallellism, enforce that here.
+ We use a hints DB entry, incremented here and decremented after
+ the transport (and any shadow transport) completes. */
+
+ if (tpt_parallel_check(tp, addr, &serialize_key))
+ {
+ if (expand_string_message)
+ {
+ logflags |= LOG_PANIC;
+ do
+ {
+ addr = addr->next;
+ post_process_one(addr, DEFER, logflags, EXIM_DTYPE_TRANSPORT, 0);
+ } while ((addr = addr2));
+ }
+ continue; /* Loop for the next set of addresses. */
+ }
+
/* So, finally, we do have some addresses that can be passed to the
transport. Before doing so, set up variables that are relevant to a
single delivery. */
deliver_set_expansions(addr);
- delivery_start = time(NULL);
+
+ gettimeofday(&delivery_start, NULL);
deliver_local(addr, FALSE);
- deliver_time = (int)(time(NULL) - delivery_start);
+ timesince(&deliver_time, &delivery_start);
/* If a shadow transport (which must perforce be another local transport), is
defined, and its condition is met, we must pass the message to the shadow
NOTE: if the condition fails because of a lookup defer, there is nothing we
can do! */
- if (tp->shadow != NULL &&
- (tp->shadow_condition == NULL ||
- expand_check_condition(tp->shadow_condition, tp->name, US"transport")))
+ if ( tp->shadow
+ && ( !tp->shadow_condition
+ || expand_check_condition(tp->shadow_condition, trname, US"transport")
+ ) )
{
- transport_instance *stp;
- address_item *shadow_addr = NULL;
- address_item **last = &shadow_addr;
+ transport_instance * stp;
+ address_item * shadow_addr = NULL;
+ address_item ** last = &shadow_addr;
- for (stp = transports; stp != NULL; stp = stp->next)
- if (Ustrcmp(stp->name, tp->shadow) == 0) break;
+ for (stp = transports; stp; stp = stp->drinst.next)
+ if (Ustrcmp(stp->drinst.name, tp->shadow) == 0) break;
- if (stp == NULL)
+ if (!stp)
log_write(0, LOG_MAIN|LOG_PANIC, "shadow transport \"%s\" not found ",
tp->shadow);
the shadow_message field a pointer to the shadow_message field of the real
address. */
- else for (addr2 = addr; addr2 != NULL; addr2 = addr2->next)
- {
- if (addr2->transport_return != OK) continue;
- addr3 = store_get(sizeof(address_item));
- *addr3 = *addr2;
- addr3->next = NULL;
- addr3->shadow_message = (uschar *)(&(addr2->shadow_message));
- addr3->transport = stp;
- addr3->transport_return = DEFER;
- addr3->return_filename = NULL;
- addr3->return_file = -1;
- *last = addr3;
- last = &(addr3->next);
- }
+ else for (addr2 = addr; addr2; addr2 = addr2->next)
+ if (addr2->transport_return == OK)
+ {
+ addr3 = store_get(sizeof(address_item), GET_UNTAINTED);
+ *addr3 = *addr2;
+ addr3->next = NULL;
+ addr3->shadow_message = US &addr2->shadow_message;
+ addr3->transport = stp;
+ addr3->transport_return = DEFER;
+ addr3->return_filename = NULL;
+ addr3->return_file = -1;
+ *last = addr3;
+ last = &addr3->next;
+ }
/* If we found any addresses to shadow, run the delivery, and stick any
message back into the shadow_message field in the original. */
- if (shadow_addr != NULL)
+ if (shadow_addr)
{
+ const uschar * s_trname = stp->drinst.name;
int save_count = transport_count;
DEBUG(D_deliver|D_transport)
debug_printf(">>>>>>>>>>>>>>>> Shadow delivery >>>>>>>>>>>>>>>>\n");
deliver_local(shadow_addr, TRUE);
- for(; shadow_addr != NULL; shadow_addr = shadow_addr->next)
+ for(; shadow_addr; shadow_addr = shadow_addr->next)
{
int sresult = shadow_addr->transport_return;
- *((uschar **)(shadow_addr->shadow_message)) = (sresult == OK)?
- string_sprintf(" ST=%s", stp->name) :
- string_sprintf(" ST=%s (%s%s%s)", stp->name,
- (shadow_addr->basic_errno <= 0)?
- US"" : US strerror(shadow_addr->basic_errno),
- (shadow_addr->basic_errno <= 0 || shadow_addr->message == NULL)?
- US"" : US": ",
- (shadow_addr->message != NULL)? shadow_addr->message :
- (shadow_addr->basic_errno <= 0)? US"unknown error" : US"");
+ *(uschar **)shadow_addr->shadow_message =
+ sresult == OK
+ ? string_sprintf(" ST=%s", s_trname)
+ : string_sprintf(" ST=%s (%s%s%s)", s_trname,
+ shadow_addr->basic_errno <= 0
+ ? US""
+ : US strerror(shadow_addr->basic_errno),
+ shadow_addr->basic_errno <= 0 || !shadow_addr->message
+ ? US""
+ : US": ",
+ shadow_addr->message
+ ? shadow_addr->message
+ : shadow_addr->basic_errno <= 0
+ ? US"unknown error"
+ : US"");
DEBUG(D_deliver|D_transport)
debug_printf("%s shadow transport returned %s for %s\n",
- stp->name,
- (sresult == OK)? "OK" :
- (sresult == DEFER)? "DEFER" :
- (sresult == FAIL)? "FAIL" :
- (sresult == PANIC)? "PANIC" : "?",
- shadow_addr->address);
+ s_trname, rc_to_string(sresult), shadow_addr->address);
}
DEBUG(D_deliver|D_transport)
deliver_set_expansions(NULL);
+ /* If the transport was parallelism-limited, decrement the hints DB record. */
+
+ if (serialize_key) enq_end(serialize_key);
+
/* Now we can process the results of the real transport. We must take each
address off the chain first, because post_process_one() puts it on another
chain. */
- for (addr2 = addr; addr2 != NULL; addr2 = nextaddr)
+ for (addr2 = addr; addr2; addr2 = nextaddr)
{
int result = addr2->transport_return;
nextaddr = addr2->next;
DEBUG(D_deliver|D_transport)
debug_printf("%s transport returned %s for %s\n",
- tp->name,
- (result == OK)? "OK" :
- (result == DEFER)? "DEFER" :
- (result == FAIL)? "FAIL" :
- (result == PANIC)? "PANIC" : "?",
- addr2->address);
+ trname, rc_to_string(result), addr2->address);
/* If there is a retry_record, or if delivery is deferred, build a retry
item for setting a new retry time or deleting the old retry record from
if (result == DEFER || testflag(addr2, af_lt_retry_exists))
{
- int flags = (result == DEFER)? 0 : rf_delete;
- uschar *retry_key = string_copy((tp->retry_use_local_part)?
- addr2->address_retry_key : addr2->domain_retry_key);
+ int flags = result == DEFER ? 0 : rf_delete;
+ uschar * retry_key = string_copy(tp->retry_use_local_part
+ ? addr2->address_retry_key : addr2->domain_retry_key);
*retry_key = 'T';
retry_add_item(addr2, retry_key, flags);
}
/* Done with this address */
- if (result == OK) addr2->more_errno = deliver_time;
- post_process_one(addr2, result, logflags, DTYPE_TRANSPORT, logchar);
+ addr2->delivery_time = deliver_time;
+ post_process_one(addr2, result, logflags, EXIM_DTYPE_TRANSPORT, logchar);
/* If a pipe delivery generated text to be sent back, the result may be
changed to FAIL, and we must copy this for subsequent addresses in the
if (addr2->transport_return != result)
{
- for (addr3 = nextaddr; addr3 != NULL; addr3 = addr3->next)
+ for (addr3 = nextaddr; addr3; addr3 = addr3->next)
{
addr3->transport_return = addr2->transport_return;
addr3->basic_errno = addr2->basic_errno;
{
int sep = 0;
address_item **aptr = &addr_remote;
-uschar *listptr = remote_sort_domains;
+const uschar *listptr = remote_sort_domains;
uschar *pattern;
uschar patbuf[256];
-while (*aptr != NULL &&
- (pattern = string_nextinlist(&listptr, &sep, patbuf, sizeof(patbuf)))
- != NULL)
+/*XXX The list is used before expansion. Not sure how that ties up with the docs */
+while ( *aptr
+ && (pattern = string_nextinlist(&listptr, &sep, patbuf, sizeof(patbuf)))
+ )
{
address_item *moved = NULL;
address_item **bptr = &moved;
- while (*aptr != NULL)
+ while (*aptr)
{
address_item **next;
deliver_domain = (*aptr)->domain; /* set $domain */
- if (match_isinlist(deliver_domain, &pattern, UCHAR_MAX+1,
+ if (match_isinlist(deliver_domain, (const uschar **)&pattern, UCHAR_MAX+1,
&domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL) == OK)
{
- aptr = &((*aptr)->next);
+ aptr = &(*aptr)->next;
continue;
}
- next = &((*aptr)->next);
- while (*next != NULL &&
- (deliver_domain = (*next)->domain, /* Set $domain */
- match_isinlist(deliver_domain, &pattern, UCHAR_MAX+1,
- &domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL)) != OK)
- next = &((*next)->next);
+ next = &(*aptr)->next;
+ while ( *next
+ && (deliver_domain = (*next)->domain, /* Set $domain */
+ match_isinlist(deliver_domain, (const uschar **)&pattern, UCHAR_MAX+1,
+ &domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL)) != OK
+ )
+ next = &(*next)->next;
/* If the batch of non-matchers is at the end, add on any that were
extracted further up the chain, and end this iteration. Otherwise,
extract them from the chain and hang on the moved chain. */
- if (*next == NULL)
+ if (!*next)
{
*next = moved;
break;
*aptr = *next;
*next = NULL;
bptr = next;
- aptr = &((*aptr)->next);
+ aptr = &(*aptr)->next;
}
/* If the loop ended because the final address matched, *aptr will
is, there was a string of non-matching addresses at the end. In this
case the extracted addresses have already been added on the end. */
- if (*aptr == NULL) *aptr = moved;
+ if (!*aptr) *aptr = moved;
}
DEBUG(D_deliver)
{
- address_item *addr;
debug_printf("remote addresses after sorting:\n");
- for (addr = addr_remote; addr != NULL; addr = addr->next)
+ for (address_item * addr = addr_remote; addr; addr = addr->next)
debug_printf(" %s\n", addr->address);
}
}
often bigger) so even if we are reading while the subprocess is still going, we
should never have only a partial item in the buffer.
+hs12: This assumption is not true anymore, since we get quite large items (certificate
+information and such).
+
Argument:
poffset the offset of the parlist item
eop TRUE if the process has completed
address_item *addr = p->addr;
pid_t pid = p->pid;
int fd = p->fd;
-uschar *endptr = big_buffer;
-uschar *ptr = endptr;
+
uschar *msg = p->msg;
BOOL done = p->done;
-BOOL unfinished = TRUE;
-/* minimum size to read is header size including id, subid and length */
-int required = PIPE_HEADER_SIZE;
-
-/* Loop through all items, reading from the pipe when necessary. The pipe
-is set up to be non-blocking, but there are two different Unix mechanisms in
-use. Exim uses O_NONBLOCK if it is defined. This returns 0 for end of file,
-and EAGAIN for no more data. If O_NONBLOCK is not defined, Exim uses O_NDELAY,
-which returns 0 for both end of file and no more data. We distinguish the
-two cases by taking 0 as end of file only when we know the process has
-completed.
-
-Each separate item is written to the pipe in a single write(), and as they are
-all short items, the writes will all be atomic and we should never find
-ourselves in the position of having read an incomplete item. "Short" in this
-case can mean up to about 1K in the case when there is a long error message
-associated with an address. */
-
-DEBUG(D_deliver) debug_printf("reading pipe for subprocess %d (%s)\n",
- (int)p->pid, eop? "ended" : "not ended");
-
-while (!done)
- {
- retry_item *r, **rp;
- int remaining = endptr - ptr;
- uschar header[PIPE_HEADER_SIZE + 1];
- uschar id, subid;
- uschar *endc;
- /* Read (first time) or top up the chars in the buffer if necessary.
- There will be only one read if we get all the available data (i.e. don't
- fill the buffer completely). */
+continue_hostname = NULL;
+continue_transport = NULL;
- if (remaining < required && unfinished)
- {
- int len;
- int available = big_buffer_size - remaining;
+/* Loop through all items, reading from the pipe when necessary. The pipe
+used to be non-blocking. But I do not see a reason for using non-blocking I/O
+here, as the preceding poll() tells us, if data is available for reading.
- if (remaining > 0) memmove(big_buffer, ptr, remaining);
+A read() on a "selected" handle should never block, but(!) it may return
+less data then we expected. (The buffer size we pass to read() shouldn't be
+understood as a "request", but as a "limit".)
- ptr = big_buffer;
- endptr = big_buffer + remaining;
- len = read(fd, endptr, available);
+Each separate item is written to the pipe in a timely manner. But, especially for
+larger items, the read(2) may already return partial data from the write(2).
- DEBUG(D_deliver) debug_printf("read() yielded %d\n", len);
+The write is atomic mostly (depending on the amount written), but atomic does
+not imply "all or noting", it just is "not intermixed" with other writes on the
+same channel (pipe).
- /* If the result is EAGAIN and the process is not complete, just
- stop reading any more and process what we have already. */
+*/
- if (len < 0)
- {
- if (!eop && errno == EAGAIN) len = 0; else
- {
- msg = string_sprintf("failed to read pipe from transport process "
- "%d for transport %s: %s", pid, addr->transport->driver_name,
- strerror(errno));
- break;
- }
- }
+DEBUG(D_deliver) debug_printf("reading pipe for subprocess %ld (%s)\n",
+ (long)p->pid, eop? "ended" : "not ended yet");
- /* If the length is zero (eof or no-more-data), just process what we
- already have. Note that if the process is still running and we have
- read all the data in the pipe (but less that "available") then we
- won't read any more, as "unfinished" will get set FALSE. */
+while (!done)
+ {
+ retry_item *r, **rp;
+ uschar pipeheader[PIPE_HEADER_SIZE+1];
+ uschar *id = &pipeheader[0];
+ uschar *subid = &pipeheader[1];
+ uschar *ptr = big_buffer;
+ size_t required = PIPE_HEADER_SIZE; /* first the pipehaeder, later the data */
+ ssize_t got;
- endptr += len;
- remaining += len;
- unfinished = len == available;
- }
+ DEBUG(D_deliver)
+ debug_printf("expect %lu bytes (pipeheader) from tpt process %ld\n",
+ (u_long)required, (long)pid);
- /* If we are at the end of the available data, exit the loop. */
- if (ptr >= endptr) break;
+ /* We require(!) all the PIPE_HEADER_SIZE bytes here, as we know,
+ they're written in a timely manner, so waiting for the write shouldn't hurt a lot.
+ If we get less, we can assume the subprocess do be done and do not expect any further
+ information from it. */
- /* copy and read header */
- memcpy(header, ptr, PIPE_HEADER_SIZE);
- header[PIPE_HEADER_SIZE] = '\0';
- id = header[0];
- subid = header[1];
- required = Ustrtol(header + 2, &endc, 10) + PIPE_HEADER_SIZE; /* header + data */
- if (*endc)
+ if ((got = readn(fd, pipeheader, required)) != required)
{
- msg = string_sprintf("failed to read pipe from transport process "
- "%d for transport %s: error reading size from header", pid, addr->transport->driver_name);
+ msg = string_sprintf("got " SSIZE_T_FMT " of %d bytes (pipeheader) "
+ "from transport process %ld for transport %s",
+ got, PIPE_HEADER_SIZE, (long)pid, addr->transport->drinst.driver_name);
done = TRUE;
break;
}
+ pipeheader[PIPE_HEADER_SIZE] = '\0';
DEBUG(D_deliver)
- debug_printf("header read id:%c,subid:%c,size:%s,required:%d,remaining:%d,unfinished:%d\n",
- id, subid, header+2, required, remaining, unfinished);
+ debug_printf("got %ld bytes (pipeheader) '%c' from transport process %ld\n",
+ (long) got, *id, (long)pid);
- /* is there room for the dataset we want to read ? */
- if (required > big_buffer_size - PIPE_HEADER_SIZE)
+ {
+ /* If we can't decode the pipeheader, the subprocess seems to have a
+ problem, we do not expect any furher information from it. */
+ char *endc;
+ required = Ustrtol(pipeheader+2, &endc, 10);
+ if (*endc)
{
- msg = string_sprintf("failed to read pipe from transport process "
- "%d for transport %s: big_buffer too small! required size=%d buffer size=%d", pid, addr->transport->driver_name,
- required, big_buffer_size - PIPE_HEADER_SIZE);
+ msg = string_sprintf("failed to read pipe "
+ "from transport process %ld for transport %s: error decoding size from header",
+ (long)pid, addr ? addr->transport->drinst.driver_name : US"?");
done = TRUE;
break;
}
+ }
+
+ DEBUG(D_deliver)
+ debug_printf("expect %lu bytes (pipedata) from transport process %ld\n",
+ (u_long)required, (long)pid);
- /* we wrote all datasets with atomic write() calls
- remaining < required only happens if big_buffer was too small
- to get all available data from pipe. unfinished has to be true
- as well. */
- if (remaining < required)
+ /* Same as above, the transport process will write the bytes announced
+ in a timely manner, so we can just wait for the bytes, getting less than expected
+ is considered a problem of the subprocess, we do not expect anything else from it. */
+ if ((got = readn(fd, big_buffer, required)) != required)
{
- if (unfinished)
- continue;
- msg = string_sprintf("failed to read pipe from transport process "
- "%d for transport %s: required size=%d > remaining size=%d and unfinished=false",
- pid, addr->transport->driver_name, required, remaining);
+ msg = string_sprintf("got only " SSIZE_T_FMT " of " SIZE_T_FMT
+ " bytes (pipedata) from transport process %ld for transport %s",
+ got, required, (long)pid, addr->transport->drinst.driver_name);
done = TRUE;
break;
}
- /* step behind the header */
- ptr += PIPE_HEADER_SIZE;
-
/* Handle each possible type of item, assuming the complete item is
available in store. */
- switch (id)
+ switch (*id)
{
/* Host items exist only if any hosts were marked unusable. Match
up by checking the IP address. */
case 'H':
- for (h = addrlist->host_list; h != NULL; h = h->next)
- {
- if (h->address == NULL || Ustrcmp(h->address, ptr+2) != 0) continue;
- h->status = ptr[0];
- h->why = ptr[1];
- }
- ptr += 2;
- while (*ptr++);
- break;
+ for (h = addrlist->host_list; h; h = h->next)
+ {
+ if (!h->address || Ustrcmp(h->address, ptr+2) != 0) continue;
+ h->status = ptr[0];
+ h->why = ptr[1];
+ }
+ ptr += 2;
+ while (*ptr++);
+ break;
/* Retry items are sent in a preceding R item for each address. This is
kept separate to keep each message short enough to guarantee it won't
that a "delete" item is dropped in favour of an "add" item. */
case 'R':
- if (addr == NULL) goto ADDR_MISMATCH;
+ if (!addr) goto ADDR_MISMATCH;
- DEBUG(D_deliver|D_retry)
- debug_printf("reading retry information for %s from subprocess\n",
- ptr+1);
+ DEBUG(D_deliver|D_retry)
+ debug_printf("reading retry information for %s from subprocess\n",
+ ptr+1);
- /* Cut out any "delete" items on the list. */
+ /* Cut out any "delete" items on the list. */
- for (rp = &(addr->retries); (r = *rp) != NULL; rp = &(r->next))
- {
- if (Ustrcmp(r->key, ptr+1) == 0) /* Found item with same key */
- {
- if ((r->flags & rf_delete) == 0) break; /* It was not "delete" */
- *rp = r->next; /* Excise a delete item */
- DEBUG(D_deliver|D_retry)
- debug_printf(" existing delete item dropped\n");
- }
- }
+ for (rp = &addr->retries; (r = *rp); rp = &r->next)
+ if (Ustrcmp(r->key, ptr+1) == 0) /* Found item with same key */
+ {
+ if (!(r->flags & rf_delete)) break; /* It was not "delete" */
+ *rp = r->next; /* Excise a delete item */
+ DEBUG(D_deliver|D_retry)
+ debug_printf(" existing delete item dropped\n");
+ }
- /* We want to add a delete item only if there is no non-delete item;
- however we still have to step ptr through the data. */
+ /* We want to add a delete item only if there is no non-delete item;
+ however we still have to step ptr through the data. */
- if (r == NULL || (*ptr & rf_delete) == 0)
- {
- r = store_get(sizeof(retry_item));
- r->next = addr->retries;
- addr->retries = r;
- r->flags = *ptr++;
- r->key = string_copy(ptr);
- while (*ptr++);
- memcpy(&(r->basic_errno), ptr, sizeof(r->basic_errno));
- ptr += sizeof(r->basic_errno);
- memcpy(&(r->more_errno), ptr, sizeof(r->more_errno));
- ptr += sizeof(r->more_errno);
- r->message = (*ptr)? string_copy(ptr) : NULL;
- DEBUG(D_deliver|D_retry)
- debug_printf(" added %s item\n",
- ((r->flags & rf_delete) == 0)? "retry" : "delete");
- }
+ if (!r || !(*ptr & rf_delete))
+ {
+ r = store_get(sizeof(retry_item), GET_UNTAINTED);
+ r->next = addr->retries;
+ addr->retries = r;
+ r->flags = *ptr++;
+ r->key = string_copy(ptr);
+ while (*ptr++);
+ memcpy(&r->basic_errno, ptr, sizeof(r->basic_errno));
+ ptr += sizeof(r->basic_errno);
+ memcpy(&r->more_errno, ptr, sizeof(r->more_errno));
+ ptr += sizeof(r->more_errno);
+ r->message = *ptr ? string_copy(ptr) : NULL;
+ DEBUG(D_deliver|D_retry) debug_printf(" added %s item\n",
+ r->flags & rf_delete ? "delete" : "retry");
+ }
- else
- {
- DEBUG(D_deliver|D_retry)
- debug_printf(" delete item not added: non-delete item exists\n");
- ptr++;
- while(*ptr++);
- ptr += sizeof(r->basic_errno) + sizeof(r->more_errno);
- }
+ else
+ {
+ DEBUG(D_deliver|D_retry)
+ debug_printf(" delete item not added: non-delete item exists\n");
+ ptr++;
+ while(*ptr++);
+ ptr += sizeof(r->basic_errno) + sizeof(r->more_errno);
+ }
- while(*ptr++);
- break;
+ while(*ptr++);
+ break;
/* Put the amount of data written into the parlist block */
- case 'S':
- memcpy(&(p->transport_count), ptr, sizeof(transport_count));
- ptr += sizeof(transport_count);
- break;
+ case 'S': /* Size */
+ memcpy(&(p->transport_count), ptr, sizeof(transport_count));
+ ptr += sizeof(transport_count);
+ break;
/* Address items are in the order of items on the address chain. We
remember the current address value in case this function is called
it in with the other info, in order to keep each message short enough to
guarantee it won't be split in the pipe. */
-#ifdef SUPPORT_TLS
- case 'X':
- if (addr == NULL) goto ADDR_MISMATCH; /* Below, in 'A' handler */
- switch (subid)
- {
- case '1':
- addr->cipher = NULL;
- addr->peerdn = NULL;
-
- if (*ptr)
- addr->cipher = string_copy(ptr);
- while (*ptr++);
- if (*ptr)
- addr->peerdn = string_copy(ptr);
- break;
-
- case '2':
- addr->peercert = NULL;
- if (*ptr)
- (void) tls_import_cert(ptr, &addr->peercert);
- break;
-
- case '3':
- addr->ourcert = NULL;
- if (*ptr)
- (void) tls_import_cert(ptr, &addr->ourcert);
- break;
+#ifndef DISABLE_TLS
+ case 'X': /* TLS details */
+ if (!addr) goto ADDR_MISMATCH; /* Below, in 'A' handler */
+ switch (*subid)
+ {
+ case '1':
+ addr->tlsver = addr->cipher = addr->peerdn = NULL;
+
+ if (*ptr)
+ {
+ addr->cipher = string_copy(ptr);
+ addr->tlsver = string_copyn(ptr, Ustrchr(ptr, ':') - ptr);
+ }
+ while (*ptr++);
+ if (*ptr)
+ addr->peerdn = string_copy(ptr);
+ break;
+
+ case '2':
+ if (*ptr)
+ (void) tls_import_cert(ptr, &addr->peercert);
+ else
+ addr->peercert = NULL;
+ break;
+
+ case '3':
+ if (*ptr)
+ (void) tls_import_cert(ptr, &addr->ourcert);
+ else
+ addr->ourcert = NULL;
+ break;
# ifndef DISABLE_OCSP
- case '4':
- addr->ocsp = OCSP_NOT_REQ;
- if (*ptr)
- addr->ocsp = *ptr - '0';
- break;
+ case '4':
+ addr->ocsp = *ptr ? *ptr - '0' : OCSP_NOT_REQ;
+ break;
# endif
- }
- while (*ptr++);
- break;
-#endif /*SUPPORT_TLS*/
+ }
+ while (*ptr++);
+ break;
+#endif /*DISABLE_TLS*/
case 'C': /* client authenticator information */
- switch (subid)
- {
- case '1':
- addr->authenticator = (*ptr)? string_copy(ptr) : NULL;
- break;
- case '2':
- addr->auth_id = (*ptr)? string_copy(ptr) : NULL;
- break;
- case '3':
- addr->auth_sndr = (*ptr)? string_copy(ptr) : NULL;
- break;
- }
- while (*ptr++);
- break;
+ switch (*subid)
+ {
+ case '1': addr->authenticator = *ptr ? string_copy(ptr) : NULL; break;
+ case '2': addr->auth_id = *ptr ? string_copy(ptr) : NULL; break;
+ case '3': addr->auth_sndr = *ptr ? string_copy(ptr) : NULL; break;
+ }
+ while (*ptr++);
+ break;
#ifndef DISABLE_PRDR
case 'P':
- addr->flags |= af_prdr_used;
- break;
+ setflag(addr, af_prdr_used);
+ break;
#endif
- case 'D':
- if (addr == NULL) goto ADDR_MISMATCH;
- memcpy(&(addr->dsn_aware), ptr, sizeof(addr->dsn_aware));
- ptr += sizeof(addr->dsn_aware);
- DEBUG(D_deliver) debug_printf("DSN read: addr->dsn_aware = %d\n", addr->dsn_aware);
- break;
-
- case 'A':
- if (addr == NULL)
- {
- ADDR_MISMATCH:
- msg = string_sprintf("address count mismatch for data read from pipe "
- "for transport process %d for transport %s", pid,
- addrlist->transport->driver_name);
- done = TRUE;
+ case 'L':
+ switch (*subid)
+ {
+#ifndef DISABLE_PIPE_CONNECT
+ case 2: setflag(addr, af_early_pipe); /*FALLTHROUGH*/
+#endif
+ case 1: setflag(addr, af_pipelining); break;
+ }
break;
- }
- addr->transport_return = *ptr++;
- addr->special_action = *ptr++;
- memcpy(&(addr->basic_errno), ptr, sizeof(addr->basic_errno));
- ptr += sizeof(addr->basic_errno);
- memcpy(&(addr->more_errno), ptr, sizeof(addr->more_errno));
- ptr += sizeof(addr->more_errno);
- memcpy(&(addr->flags), ptr, sizeof(addr->flags));
- ptr += sizeof(addr->flags);
- addr->message = (*ptr)? string_copy(ptr) : NULL;
- while(*ptr++);
- addr->user_message = (*ptr)? string_copy(ptr) : NULL;
- while(*ptr++);
-
- /* Always two strings for host information, followed by the port number and DNSSEC mark */
-
- if (*ptr != 0)
- {
- h = store_get(sizeof(host_item));
- h->name = string_copy(ptr);
- while (*ptr++);
- h->address = string_copy(ptr);
- while(*ptr++);
- memcpy(&(h->port), ptr, sizeof(h->port));
- ptr += sizeof(h->port);
- h->dnssec = *ptr == '2' ? DS_YES
- : *ptr == '1' ? DS_NO
- : DS_UNK;
- ptr++;
- addr->host_used = h;
- }
- else ptr++;
+ case 'K':
+ setflag(addr, af_chunking_used);
+ break;
- /* Finished with this address */
+ case 'T':
+ setflag(addr, af_tcp_fastopen_conn);
+ if (*subid > '0') setflag(addr, af_tcp_fastopen);
+ if (*subid > '1') setflag(addr, af_tcp_fastopen_data);
+ break;
- addr = addr->next;
- break;
+ case 'D': /* DSN */
+ if (!addr) goto ADDR_MISMATCH;
+ memcpy(&(addr->dsn_aware), ptr, sizeof(addr->dsn_aware));
+ ptr += sizeof(addr->dsn_aware);
+ DEBUG(D_deliver) debug_printf("DSN read: addr->dsn_aware = %d\n", addr->dsn_aware);
+ break;
- /* Z marks the logical end of the data. It is followed by '0' if
+ case 'A': /* Per-address info */
+ if (!addr)
+ {
+ ADDR_MISMATCH:
+ msg = string_sprintf("address count mismatch for data read from pipe "
+ "for transport process %ld for transport %s",
+ (long)pid, addrlist->transport->drinst.driver_name);
+ done = TRUE;
+ break;
+ }
+
+ switch (*subid)
+ {
+#ifndef DISABLE_DKIM
+ case '4': /* DKIM information */
+ addr->dkim_used = string_copy(ptr);
+ while(*ptr++);
+ break;
+#endif
+
+ case '3': /* explicit notification of continued-connection (non)use;
+ overrides caller's knowlege. */
+ if (*ptr & BIT(1)) setflag(addr, af_new_conn);
+ else if (*ptr & BIT(2)) setflag(addr, af_cont_conn);
+ break;
+
+#ifdef SUPPORT_SOCKS
+ case '2': /* proxy information; must arrive before A0 and applies to that addr XXX oops*/
+ proxy_session = TRUE; /*XXX should this be cleared somewhere? */
+ if (*ptr == 0)
+ ptr++;
+ else
+ {
+ proxy_local_address = string_copy(ptr);
+ while(*ptr++);
+ memcpy(&proxy_local_port, ptr, sizeof(proxy_local_port));
+ ptr += sizeof(proxy_local_port);
+ }
+ break;
+#endif
+
+#ifdef EXPERIMENTAL_DSN_INFO
+ case '1': /* must arrive before A0, and applies to that addr */
+ /* Two strings: smtp_greeting and helo_response */
+ addr->smtp_greeting = string_copy(ptr);
+ while(*ptr++);
+ addr->helo_response = string_copy(ptr);
+ while(*ptr++);
+ break;
+#endif
+
+ case '0': /* results of trying to send to this address */
+ DEBUG(D_deliver) debug_printf("A0 %s tret %d\n", addr->address, *ptr);
+ addr->transport_return = *ptr++;
+ addr->special_action = *ptr++;
+ memcpy(&addr->basic_errno, ptr, sizeof(addr->basic_errno));
+ ptr += sizeof(addr->basic_errno);
+ memcpy(&addr->more_errno, ptr, sizeof(addr->more_errno));
+ ptr += sizeof(addr->more_errno);
+ memcpy(&addr->delivery_time, ptr, sizeof(addr->delivery_time));
+ ptr += sizeof(addr->delivery_time);
+ memcpy(&addr->flags, ptr, sizeof(addr->flags));
+ ptr += sizeof(addr->flags);
+ addr->message = *ptr ? string_copy(ptr) : NULL;
+ while(*ptr++);
+ addr->user_message = *ptr ? string_copy(ptr) : NULL;
+ while(*ptr++);
+
+ /* Always two strings for host information, followed by the port number and DNSSEC mark */
+
+ if (*ptr)
+ {
+ h = store_get(sizeof(host_item), GET_UNTAINTED);
+ h->name = string_copy(ptr);
+ while (*ptr++);
+ h->address = string_copy(ptr);
+ while(*ptr++);
+ memcpy(&h->port, ptr, sizeof(h->port));
+ ptr += sizeof(h->port);
+ h->dnssec = *ptr == '2' ? DS_YES
+ : *ptr == '1' ? DS_NO
+ : DS_UNK;
+ addr->host_used = h;
+ }
+ ptr++;
+
+ continue_flags = 0;
+#ifndef DISABLE_TLS
+ if (testflag(addr, af_cert_verified)) continue_flags |= CTF_CV;
+# ifdef SUPPORT_DANE
+ if (testflag(addr, af_dane_verified)) continue_flags |= CTF_DV;
+# endif
+# ifndef DISABLE_TLS_RESUME
+ if (testflag(addr, af_tls_resume)) continue_flags |= CTF_TR;
+# endif
+#endif
+ /* Finished with this address */
+
+ addr = addr->next;
+ break;
+ }
+ break;
+
+ /* Local interface address/port */
+ case 'I':
+ if (*ptr) sending_ip_address = string_copy(ptr);
+ while (*ptr++) ;
+ if (*ptr) sending_port = atoi(CS ptr);
+ while (*ptr++) ;
+ break;
+
+ /* Z0 marks the logical end of the data. It is followed by '0' if
continue_transport was NULL at the end of transporting, otherwise '1'.
- We need to know when it becomes NULL during a delivery down a passed SMTP
- channel so that we don't try to pass anything more down it. Of course, for
- most normal messages it will remain NULL all the time. */
+ Those are now for historical reasons only; we always clear the continued
+ channel info, and then set it explicitly if the transport indicates it
+ is still open, because it could differ for each transport we are running in
+ parallel.
+
+ Z1 is a suggested message_id to handle next, used during a
+ continued-transport sequence. */
case 'Z':
- if (*ptr == '0')
- {
- continue_transport = NULL;
- continue_hostname = NULL;
- }
- done = TRUE;
- DEBUG(D_deliver) debug_printf("Z0%c item read\n", *ptr);
- break;
+ switch (*subid)
+ {
+ case '0': /* End marker */
+ done = TRUE;
+ DEBUG(D_deliver) debug_printf("Z0%c item read\n", *ptr);
+ break;
+ case '1': /* Suggested continuation message */
+ Ustrncpy(continue_next_id, ptr, MESSAGE_ID_LENGTH);
+ continue_sequence = atoi(CS ptr + MESSAGE_ID_LENGTH + 1);
+ DEBUG(D_deliver) debug_printf("continue_next_id: %s seq %d\n",
+ continue_next_id, continue_sequence);
+ break;
+ case '2': /* Continued transport, host & addr */
+ {
+ int recvd_fd;
+
+ DEBUG(D_any) if (Ustrcmp(process_purpose, "continued-delivery") != 0)
+ debug_printf("%s becomes continued-delivery\n", process_purpose);
+ process_purpose = US"continued-delivery";
+ continue_transport = string_copy(ptr); while (*ptr++) ;
+ continue_hostname = string_copy(ptr); while (*ptr++) ;
+ continue_host_address = string_copy(ptr); while (*ptr++) ;
+ continue_sequence = atoi(CS ptr);
+
+ dup2((recvd_fd = recv_fd_from_sock(fd)), 0);
+ close(recvd_fd);
+
+ DEBUG(D_deliver)
+ debug_printf("continue: fd %d tpt %s host '%s' addr '%s' seq %d\n",
+ recvd_fd, continue_transport, continue_hostname,
+ continue_host_address, continue_sequence);
+ break;
+ }
+ case '3': /* Continued conn info */
+ smtp_peer_options = ptr[0];
+ f.smtp_authenticated = ptr[1] & 1;
+ break;
+#ifndef DISABLE_TLS
+ case '4': /* Continued TLS info */
+ continue_proxy_cipher = string_copy(ptr);
+ break;
+ case '5': /* Continued DANE info */
+ case '6': /* Continued TLS info */
+# ifdef SUPPORT_DANE
+ continue_proxy_dane = *subid == '5';
+# endif
+ continue_proxy_sni = *ptr ? string_copy(ptr) : NULL;
+ break;
+#endif
+#ifndef DISABLE_ESMTP_LIMITS
+ case '7': /* Continued peer limits */
+ sscanf(CS ptr, "%u %u %u",
+ &continue_limit_mail, &continue_limit_rcpt,
+ &continue_limit_rcptdom);
+ break;
+#endif
+#ifdef SUPPORT_SOCKS
+ case '8': /* Continued proxy info */
+ proxy_local_address = string_copy(ptr); while (*ptr++) ;
+ proxy_local_port = atoi(CS ptr); while (*ptr++) ;
+ proxy_external_address = string_copy(ptr); while (*ptr++) ;
+ proxy_external_port = atoi(CS ptr);
+ break;
+#endif
+ }
+ break;
/* Anything else is a disaster. */
default:
- msg = string_sprintf("malformed data (%d) read from pipe for transport "
- "process %d for transport %s", ptr[-1], pid,
- addr->transport->driver_name);
- done = TRUE;
- break;
+ msg = string_sprintf("malformed data (%d) read from pipe for transport "
+ "process %ld for transport %s", ptr[-1], (long)pid,
+ addr ? addr->transport->drinst.driver_name : US"?");
+ done = TRUE;
+ break;
}
}
p->done = done;
/* If the process hadn't finished, and we haven't seen the end of the data
-or suffered a disaster, update the rest of the state, and return FALSE to
+or if we suffered a disaster, update the rest of the state, and return FALSE to
indicate "not finished". */
if (!eop && !done)
/* If we have finished without error, but haven't had data for every address,
something is wrong. */
-if (msg == NULL && addr != NULL)
+if (!msg && addr)
msg = string_sprintf("insufficient address data read from pipe "
- "for transport process %d for transport %s", pid,
- addr->transport->driver_name);
+ "for transport process %ld for transport %s", (long)pid,
+ addr->transport->drinst.driver_name);
/* If an error message is set, something has gone wrong in getting back
the delivery data. Put the message into each address and freeze it. */
-if (msg != NULL)
- {
- for (addr = addrlist; addr != NULL; addr = addr->next)
+if (msg)
+ for (addr = addrlist; addr; addr = addr->next)
{
addr->transport_return = DEFER;
addr->special_action = SPECIAL_FREEZE;
addr->message = msg;
+ log_write(0, LOG_MAIN|LOG_PANIC, "Delivery status for %s: %s\n",
+ addr->address, addr->message);
}
- }
/* Return TRUE to indicate we have got all we need from this process, even
if it hasn't actually finished yet. */
*/
static void
-remote_post_process(address_item *addr, int logflags, uschar *msg,
+remote_post_process(address_item * addr, int logflags, uschar * msg,
BOOL fallback)
{
-host_item *h;
-
/* If any host addresses were found to be unusable, add them to the unusable
tree so that subsequent deliveries don't try them. */
-for (h = addr->host_list; h != NULL; h = h->next)
- {
- if (h->address == NULL) continue;
- if (h->status >= hstatus_unusable) tree_add_unusable(h);
- }
+for (host_item * h = addr->host_list; h; h = h->next)
+ if (h->address)
+ if (h->status >= hstatus_unusable) tree_add_unusable(h);
/* Now handle each address on the chain. The transport has placed '=' or '-'
into the special_action field for each successful delivery. */
-while (addr != NULL)
+while (addr)
{
- address_item *next = addr->next;
+ address_item * next = addr->next;
/* If msg == NULL (normal processing) and the result is DEFER and we are
processing the main hosts and there are fallback hosts available, put the
address on the list for fallback delivery. */
- if (addr->transport_return == DEFER &&
- addr->fallback_hosts != NULL &&
- !fallback &&
- msg == NULL)
+ if ( addr->transport_return == DEFER
+ && addr->fallback_hosts
+ && !fallback
+ && !msg
+ )
{
addr->host_list = addr->fallback_hosts;
addr->next = addr_fallback;
else
{
- if (msg != NULL)
+ if (msg)
{
addr->message = msg;
addr->transport_return = DEFER;
}
(void)post_process_one(addr, addr->transport_return, logflags,
- DTYPE_TRANSPORT, addr->special_action);
+ EXIM_DTYPE_TRANSPORT, addr->special_action);
}
/* Next address */
we have logged that delivery, set continue_sequence to 1 so that
any subsequent deliveries don't get "*" incorrectly logged. */
-if (continue_transport == NULL) continue_sequence = 1;
+if (!continue_transport) continue_sequence = 1;
}
par_wait(void)
{
int poffset, status;
-address_item *addr, *addrlist;
+address_item * addr, * addrlist;
pid_t pid;
set_process_info("delivering %s: waiting for a remote delivery subprocess "
existence - in which case give an error return. We cannot proceed just by
waiting for a completion, because a subprocess may have filled up its pipe, and
be waiting for it to be emptied. Therefore, if no processes have finished, we
-wait for one of the pipes to acquire some data by calling select(), with a
+wait for one of the pipes to acquire some data by calling poll(), with a
timeout just in case.
The simple approach is just to iterate after reading data from a ready pipe.
This leads to non-ideal behaviour when the subprocess has written its final Z
item, closed the pipe, and is in the process of exiting (the common case). A
-call to waitpid() yields nothing completed, but select() shows the pipe ready -
+call to waitpid() yields nothing completed, but poll() shows the pipe ready -
reading it yields EOF, so you end up with busy-waiting until the subprocess has
actually finished.
To avoid this, if all the data that is needed has been read from a subprocess
-after select(), an explicit wait() for it is done. We know that all it is doing
+after poll(), an explicit wait() for it is done. We know that all it is doing
is writing to the pipe and then exiting, so the wait should not be long.
The non-blocking waitpid() is to some extent just insurance; if we could
{
while ((pid = waitpid(-1, &status, WNOHANG)) <= 0)
{
- struct timeval tv;
- fd_set select_pipes;
- int maxpipe, readycount;
+ int readycount;
/* A return value of -1 can mean several things. If errno != ECHILD, it
either means invalid options (which we discount), or that this process was
subprocesses are still in existence. If kill() gives an OK return, we know
it must be for one of our processes - it can't be for a re-use of the pid,
because if our process had finished, waitpid() would have found it. If any
- of our subprocesses are in existence, we proceed to use select() as if
+ of our subprocesses are in existence, we proceed to use poll() as if
waitpid() had returned zero. I think this is safe. */
if (pid < 0)
{
if ((pid = parlist[poffset].pid) != 0 && kill(pid, 0) == 0)
{
- DEBUG(D_deliver) debug_printf("process %d still exists: assume "
- "stolen by strace\n", (int)pid);
+ DEBUG(D_deliver) debug_printf("process %ld still exists: assume "
+ "stolen by strace\n", (long)pid);
break; /* With poffset set */
}
}
if (poffset >= remote_max_parallel)
{
DEBUG(D_deliver) debug_printf("*** no delivery children found\n");
- return NULL; /* This is the error return */
+ return NULL; /* This is the error return */
}
}
subprocess, but there are no completed subprocesses. See if any pipes are
ready with any data for reading. */
- DEBUG(D_deliver) debug_printf("selecting on subprocess pipes\n");
+ DEBUG(D_deliver) debug_printf("polling subprocess pipes\n");
- maxpipe = 0;
- FD_ZERO(&select_pipes);
for (poffset = 0; poffset < remote_max_parallel; poffset++)
- {
if (parlist[poffset].pid != 0)
- {
- int fd = parlist[poffset].fd;
- FD_SET(fd, &select_pipes);
- if (fd > maxpipe) maxpipe = fd;
- }
- }
+ {
+ parpoll[poffset].fd = parlist[poffset].fd;
+ parpoll[poffset].events = POLLIN;
+ }
+ else
+ parpoll[poffset].fd = -1;
/* Stick in a 60-second timeout, just in case. */
- tv.tv_sec = 60;
- tv.tv_usec = 0;
-
- readycount = select(maxpipe + 1, (SELECT_ARG2_TYPE *)&select_pipes,
- NULL, NULL, &tv);
+ readycount = poll(parpoll, remote_max_parallel, 60 * 1000);
/* Scan through the pipes and read any that are ready; use the count
- returned by select() to stop when there are no more. Select() can return
+ returned by poll() to stop when there are no more. Select() can return
with no processes (e.g. if interrupted). This shouldn't matter.
If par_read_pipe() returns TRUE, it means that either the terminating Z was
readycount > 0 && poffset < remote_max_parallel;
poffset++)
{
- if ((pid = parlist[poffset].pid) != 0 &&
- FD_ISSET(parlist[poffset].fd, &select_pipes))
+ if ( (pid = parlist[poffset].pid) != 0
+ && parpoll[poffset].revents
+ )
{
readycount--;
if (par_read_pipe(poffset, FALSE)) /* Finished with this pipe */
- {
for (;;) /* Loop for signals */
{
pid_t endedpid = waitpid(pid, &status, 0);
if (endedpid == pid) goto PROCESS_DONE;
if (endedpid != (pid_t)(-1) || errno != EINTR)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Unexpected error return "
- "%d (errno = %d) from waitpid() for process %d",
- (int)endedpid, errno, (int)pid);
+ "%d (errno = %d) from waitpid() for process %ld",
+ (int)endedpid, errno, (long)pid);
}
- }
}
}
/* This situation is an error, but it's probably better to carry on looking
for another process than to give up (as we used to do). */
- log_write(0, LOG_MAIN|LOG_PANIC, "Process %d finished: not found in remote "
- "transport process list", pid);
+ log_write(0, LOG_MAIN|LOG_PANIC, "Process %ld finished: not found in remote "
+ "transport process list", (long)pid);
} /* End of the "for" loop */
-/* Come here when all the data was completely read after a select(), and
+/* Come here when all the data was completely read after a poll(), and
the process in pid has been wait()ed for. */
PROCESS_DONE:
DEBUG(D_deliver)
{
if (status == 0)
- debug_printf("remote delivery process %d ended\n", (int)pid);
+ debug_printf("remote delivery process %ld ended\n", (long)pid);
else
- debug_printf("remote delivery process %d ended: status=%04x\n", (int)pid,
+ debug_printf("remote delivery process %ld ended: status=%04x\n", (long)pid,
status);
}
msg = string_sprintf("%s transport process returned non-zero status 0x%04x: "
"%s %d",
- addrlist->transport->driver_name,
+ addrlist->transport->drinst.driver_name,
status,
- (msb == 0)? "terminated by signal" : "exit code",
+ msb == 0 ? "terminated by signal" : "exit code",
code);
if (msb != 0 || (code != SIGTERM && code != SIGKILL && code != SIGQUIT))
addrlist->special_action = SPECIAL_FREEZE;
- for (addr = addrlist; addr != NULL; addr = addr->next)
+ for (addr = addrlist; addr; addr = addr->next)
{
addr->transport_return = DEFER;
addr->message = msg;
/* Else complete reading the pipe to get the result of the delivery, if all
the data has not yet been obtained. */
-else if (!parlist[poffset].done) (void)par_read_pipe(poffset, TRUE);
+else if (!parlist[poffset].done)
+ (void) par_read_pipe(poffset, TRUE);
/* Put the data count and return path into globals, mark the data slot unused,
decrement the count of subprocesses, and return the address chain. */
{
while (parcount > max)
{
- address_item *doneaddr = par_wait();
- if (doneaddr == NULL)
+ address_item * doneaddr = par_wait();
+ if (!doneaddr)
{
log_write(0, LOG_MAIN|LOG_PANIC,
"remote delivery process count got out of step");
parcount = 0;
}
- else remote_post_process(doneaddr, LOG_MAIN, NULL, fallback);
+ else
+ {
+ transport_instance * tp = doneaddr->transport;
+ if (tp->max_parallel)
+ enq_end(string_sprintf("tpt-serialize-%s", tp->drinst.name));
+
+ remote_post_process(doneaddr, LOG_MAIN, NULL, fallback);
+ }
}
}
-
-
-
static void
-rmt_dlv_checked_write(int fd, char id, char subid, void * buf, int size)
+rmt_dlv_checked_write(int fd, char id, char subid, void * buf, ssize_t size)
{
-uschar writebuffer[PIPE_HEADER_SIZE + BIG_BUFFER_SIZE];
-int header_length;
+uschar pipe_header[PIPE_HEADER_SIZE+1];
+size_t total_len = PIPE_HEADER_SIZE + size;
+
+struct iovec iov[2] = {
+ { pipe_header, PIPE_HEADER_SIZE }, /* indication about the data to expect */
+ { buf, size } /* *the* data */
+};
+
+ssize_t ret;
/* we assume that size can't get larger then BIG_BUFFER_SIZE which currently is set to 16k */
/* complain to log if someone tries with buffer sizes we can't handle*/
-if (size > 99999)
-{
- log_write(0, LOG_MAIN|LOG_PANIC_DIE,
- "Failed writing transport result to pipe: can't handle buffers > 99999 bytes. truncating!\n");
- size = 99999;
-}
+if (size > BIG_BUFFER_SIZE-1)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE,
+ "Failed writing transport result to pipe: can't handle buffers > %d bytes. truncating!\n",
+ BIG_BUFFER_SIZE-1);
+ size = BIG_BUFFER_SIZE;
+ }
-/* to keep the write() atomic we build header in writebuffer and copy buf behind */
-/* two write() calls would increase the complexity of reading from pipe */
+/* Should we check that we do not write more than PIPE_BUF? What would
+that help? */
/* convert size to human readable string prepended by id and subid */
-header_length = snprintf(CS writebuffer, PIPE_HEADER_SIZE+1, "%c%c%05d", id, subid, size);
-if (header_length != PIPE_HEADER_SIZE)
-{
+if (PIPE_HEADER_SIZE != snprintf(CS pipe_header, PIPE_HEADER_SIZE+1, "%c%c%05ld",
+ id, subid, (long)size))
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "header snprintf failed\n");
- writebuffer[0] = '\0';
-}
-DEBUG(D_deliver) debug_printf("header write id:%c,subid:%c,size:%d,final:%s\n",
- id, subid, size, writebuffer);
+DEBUG(D_deliver) debug_printf("header write id:%c,subid:%c,size:%ld,final:%s\n",
+ id, subid, (long)size, pipe_header);
-if (buf && size > 0)
- memcpy(writebuffer + PIPE_HEADER_SIZE, buf, size);
-
-size += PIPE_HEADER_SIZE;
-int ret = write(fd, writebuffer, size);
-if(ret != size)
- log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Failed writing transport result to pipe: %s\n",
- ret == -1 ? strerror(errno) : "short write");
+if ((ret = writev(fd, iov, 2)) != total_len)
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE,
+ "Failed writing transport result to pipe (%ld of %ld bytes): %s",
+ (long)ret, (long)total_len, ret == -1 ? strerror(errno) : "short write");
}
/*************************************************
do_remote_deliveries(BOOL fallback)
{
int parmax;
-int delivery_count;
int poffset;
parcount = 0; /* Number of executing subprocesses */
We use a local variable (parmax) to hold the maximum number of processes;
this gets reduced from remote_max_parallel if we can't create enough pipes. */
-if (continue_transport != NULL) remote_max_parallel = 1;
+if (continue_transport) remote_max_parallel = 1;
parmax = remote_max_parallel;
/* If the data for keeping a list of processes hasn't yet been
set up, do so. */
-if (parlist == NULL)
+if (!parlist)
{
- parlist = store_get(remote_max_parallel * sizeof(pardata));
+ parlist = store_get(remote_max_parallel * sizeof(pardata), GET_UNTAINTED);
for (poffset = 0; poffset < remote_max_parallel; poffset++)
parlist[poffset].pid = 0;
+ parpoll = store_get(remote_max_parallel * sizeof(struct pollfd), GET_UNTAINTED);
}
/* Now loop for each remote delivery */
-for (delivery_count = 0; addr_remote != NULL; delivery_count++)
+for (int delivery_count = 0; addr_remote; delivery_count++)
{
pid_t pid;
uid_t uid;
address_item *addr = addr_remote;
address_item *last = addr;
address_item *next;
+ uschar * panicmsg;
+ uschar * serialize_key = NULL;
/* Pull the first address right off the list. */
/* If no transport has been set, there has been a big screw-up somewhere. */
- if ((tp = addr->transport) == NULL)
+ if (!(tp = addr->transport))
{
- disable_logging = FALSE; /* Jic */
- remote_post_process(addr, LOG_MAIN|LOG_PANIC,
- US"No transport set by router", fallback);
- continue;
+ f.disable_logging = FALSE; /* Jic */
+ panicmsg = US"No transport set by router";
+ goto panic_continue;
}
/* Check that this base address hasn't previously been delivered to this
/* Force failure if the message is too big. */
- if (tp->message_size_limit != NULL)
+ if (tp->message_size_limit)
{
int rc = check_message_size(tp, addr);
if (rc != OK)
}
}
+/*XXX need to defeat this when DANE is used - but we don't know that yet.
+So look out for the place it gets used.
+*/
+
/* Get the flag which specifies whether the transport can handle different
domains that nevertheless resolve to the same set of hosts. If it needs
expanding, get variables set: $address_data, $domain_data, $localpart_data,
if (tp->expand_multi_domain)
deliver_set_expansions(addr);
- if (exp_bool(addr, US"transport", tp->name, D_transport,
+ if (exp_bool(addr, US"transport", tp->drinst.name, D_transport,
US"multi_domain", tp->multi_domain, tp->expand_multi_domain,
&multi_domain) != OK)
{
deliver_set_expansions(NULL);
- remote_post_process(addr, LOG_MAIN|LOG_PANIC, addr->message, fallback);
- continue;
+ panicmsg = addr->message;
+ goto panic_continue;
}
/* Get the maximum it can handle in one envelope, with zero meaning
- unlimited, which is forced for the MUA wrapper case. */
+ unlimited, which is forced for the MUA wrapper case and if the
+ value could vary depending on the messages.
+ For those, we only split (below) by (tpt,dest,erraddr,hdrs) and rely on the
+ transport splitting further by max_rcp. So we potentially lose some
+ parallellism. */
- address_count_max = tp->max_addresses;
- if (address_count_max == 0 || mua_wrapper) address_count_max = 999999;
+ GET_OPTION("max_rcpt");
+ address_count_max = mua_wrapper || Ustrchr(tp->max_addresses, '$')
+ ? UNLIMITED_ADDRS : expand_max_rcpt(tp->max_addresses);
/************************************************************************/
the use of these variables, but as it is so likely they will be used when the
maximum is 1, we don't bother. Just leave the value alone. */
- if (address_count_max != 1 &&
- address_count_max < remote_delivery_count/remote_max_parallel)
+ if ( address_count_max != 1
+ && address_count_max < remote_delivery_count/remote_max_parallel
+ )
{
- int new_max = remote_delivery_count/remote_max_parallel;
- int message_max = tp->connection_max_messages;
+ int new_max = remote_delivery_count/remote_max_parallel, message_max;
+ GET_OPTION("connection_max_messages");
+ message_max = tp->connection_max_messages;
if (connection_max_messages >= 0) message_max = connection_max_messages;
message_max -= continue_sequence - 1;
if (message_max > 0 && new_max > address_count_max * message_max)
/************************************************************************/
+/*XXX don't know yet if DANE will be used. So tpt will have to
+check at the point if gets next addr from list, and skip/defer any
+nonmatch domains
+*/
+
/* Pick off all addresses which have the same transport, errors address,
destination, and extra headers. In some cases they point to the same host
list, but we also need to check for identical host lists generated from
and if it might need a per-address check for this, re-evaluate it.
*/
- while ((next = *anchor) != NULL && address_count < address_count_max)
+ while ((next = *anchor) && address_count < address_count_max)
{
BOOL md;
if ( (multi_domain || Ustrcmp(next->domain, addr->domain) == 0)
&& tp == next->transport
&& same_hosts(next->host_list, addr->host_list)
- && same_strings(next->p.errors_address, addr->p.errors_address)
- && same_headers(next->p.extra_headers, addr->p.extra_headers)
+ && same_strings(next->prop.errors_address, addr->prop.errors_address)
+ && same_headers(next->prop.extra_headers, addr->prop.extra_headers)
&& same_ugid(tp, next, addr)
- && ( next->p.remove_headers == addr->p.remove_headers
- || ( next->p.remove_headers != NULL
- && addr->p.remove_headers != NULL
- && Ustrcmp(next->p.remove_headers, addr->p.remove_headers) == 0
+ && ( next->prop.remove_headers == addr->prop.remove_headers
+ || ( next->prop.remove_headers
+ && addr->prop.remove_headers
+ && Ustrcmp(next->prop.remove_headers, addr->prop.remove_headers) == 0
) )
&& ( !multi_domain
|| ( (
- !tp->expand_multi_domain || (deliver_set_expansions(next), 1),
+ (void)(!tp->expand_multi_domain || ((void)deliver_set_expansions(next), 1)),
exp_bool(addr,
- US"transport", next->transport->name, D_transport,
+ US"transport", next->transport->drinst.name, D_transport,
US"multi_domain", next->transport->multi_domain,
next->transport->expand_multi_domain, &md) == OK
)
/* If we are acting as an MUA wrapper, all addresses must go in a single
transaction. If not, put them back on the chain and yield FALSE. */
- if (mua_wrapper && addr_remote != NULL)
+ if (mua_wrapper && addr_remote)
{
last->next = addr_remote;
addr_remote = addr;
return FALSE;
}
+ /* If the transport is limited for parallellism, enforce that here.
+ The hints DB entry is decremented in par_reduce(), when we reap the
+ transport process. */
+
+ if (tpt_parallel_check(tp, addr, &serialize_key))
+ if ((panicmsg = expand_string_message))
+ goto panic_continue;
+ else
+ continue; /* Loop for the next set of addresses. */
+
/* Set up the expansion variables for this set of addresses */
deliver_set_expansions(addr);
/* Compute the return path, expanding a new one if required. The old one
must be set first, as it might be referred to in the expansion. */
- if(addr->p.errors_address != NULL)
- return_path = addr->p.errors_address;
-#ifdef EXPERIMENTAL_SRS
- else if(addr->p.srs_sender != NULL)
- return_path = addr->p.srs_sender;
-#endif
- else
- return_path = sender_address;
+ return_path = addr->prop.errors_address
+ ? addr->prop.errors_address : sender_address;
- if (tp->return_path != NULL)
+ GET_OPTION("return_path");
+ if (tp->return_path)
{
- uschar *new_return_path = expand_string(tp->return_path);
- if (new_return_path == NULL)
+ uschar * new_return_path = expand_string(tp->return_path);
+ if (new_return_path)
+ return_path = new_return_path;
+ else if (!f.expand_string_forcedfail)
{
- if (!expand_string_forcedfail)
- {
- remote_post_process(addr, LOG_MAIN|LOG_PANIC,
- string_sprintf("Failed to expand return path \"%s\": %s",
- tp->return_path, expand_string_message), fallback);
- continue;
- }
+ panicmsg = string_sprintf("Failed to expand return path \"%s\": %s",
+ tp->return_path, expand_string_message);
+ goto enq_continue;
}
- else return_path = new_return_path;
}
/* Find the uid, gid, and use_initgroups setting for this transport. Failure
if (!findugid(addr, tp, &uid, &gid, &use_initgroups))
{
- remote_post_process(addr, LOG_MAIN|LOG_PANIC, NULL, fallback);
- continue;
+ panicmsg = NULL;
+ goto enq_continue;
}
/* If this transport has a setup function, call it now so that it gets
That is why it is called at this point, before the continue delivery
processing, because that might use the fallback hosts. */
- if (tp->setup != NULL)
+ if (tp->setup)
(void)((tp->setup)(addr->transport, addr, NULL, uid, gid, NULL));
+ /* If we have a connection still open from a verify stage (lazy-close)
+ treat it as if it is a continued connection (apart from the counter used
+ for the log line mark). */
+
+ if (cutthrough.cctx.sock >= 0 && cutthrough.callout_hold_only)
+ {
+ DEBUG(D_deliver)
+ debug_printf("lazy-callout-close: have conn still open from verification\n");
+ continue_transport = cutthrough.transport;
+ continue_hostname = string_copy(cutthrough.host.name);
+ continue_host_address = string_copy(cutthrough.host.address);
+ continue_sequence = 1;
+ sending_ip_address = cutthrough.snd_ip;
+ sending_port = cutthrough.snd_port;
+ smtp_peer_options = cutthrough.peer_options;
+ }
+
/* If this is a run to continue delivery down an already-established
channel, check that this set of addresses matches the transport and
the channel. If it does not, defer the addresses. If a host list exists,
we must check that the continue host is on the list. Otherwise, the
host is set in the transport. */
- continue_more = FALSE; /* In case got set for the last lot */
- if (continue_transport != NULL)
+ f.continue_more = FALSE; /* In case got set for the last lot */
+ if (continue_transport)
{
- BOOL ok = Ustrcmp(continue_transport, tp->name) == 0;
- if (ok && addr->host_list != NULL)
+ BOOL ok;
+
+ if (atrn_domains)
+ { continue_transport = tp->drinst.name; ok = TRUE; }
+ else
+ ok = Ustrcmp(continue_transport, tp->drinst.name) == 0;
+
+/*XXX do we need to check for a DANEd conn vs. a change of domain? */
+
+ /* If the transport is about to override the host list do not check
+ it here but take the cost of running the transport process to discover
+ if the continued_hostname connection is suitable. This is a layering
+ violation which is unfortunate as it requires we haul in the smtp
+ include file. */
+
+ if (ok)
{
- host_item *h;
- ok = FALSE;
- for (h = addr->host_list; h != NULL; h = h->next)
- {
- if (Ustrcmp(h->name, continue_hostname) == 0)
- { ok = TRUE; break; }
- }
+ transport_info * ti = tp->drinst.info;
+ smtp_transport_options_block * ob = tp->drinst.options_block;
+
+ if ( !( Ustrcmp(ti->drinfo.driver_name, "smtp") == 0
+ && ob && ob->hosts_override && ob->hosts
+ )
+ && addr->host_list
+ )
+ {
+ ok = FALSE;
+ for (host_item * h = addr->host_list; h; h = h->next)
+ if (Ustrcmp(h->name, continue_hostname) == 0)
+ /*XXX should also check port here */
+ { ok = TRUE; break; }
+ }
}
/* Addresses not suitable; defer or queue for fallback hosts (which
if (!ok)
{
- DEBUG(D_deliver) debug_printf("not suitable for continue_transport\n");
- next = addr;
+ DEBUG(D_deliver) debug_printf("not suitable for continue_transport (%s)\n",
+ Ustrcmp(continue_transport, tp->drinst.name) != 0
+ ? string_sprintf("tpt %s vs %s", continue_transport, tp->drinst.name)
+ : string_sprintf("no host matching %s", continue_hostname));
+ if (serialize_key) enq_end(serialize_key);
- if (addr->fallback_hosts != NULL && !fallback)
+ if (addr->fallback_hosts && !fallback)
{
- for (;;)
+ for (next = addr; ; next = next->next)
{
next->host_list = next->fallback_hosts;
- DEBUG(D_deliver) debug_printf("%s queued for fallback host(s)\n", next->address);
- if (next->next == NULL) break;
- next = next->next;
+ DEBUG(D_deliver)
+ debug_printf("%s queued for fallback host(s)\n", next->address);
+ if (!next->next) break;
}
next->next = addr_fallback;
addr_fallback = addr;
}
else
- {
- while (next->next != NULL) next = next->next;
- next->next = addr_defer;
- addr_defer = addr;
- }
+ {
+ for (next = addr; ; next = next->next)
+ {
+ DEBUG(D_deliver) debug_printf(" %s to def list\n", next->address);
+ if (!next->next) break;
+ }
+ next->next = addr_defer;
+ addr_defer = addr;
+ }
continue;
}
+ }
- /* Set a flag indicating whether there are further addresses that list
- the continued host. This tells the transport to leave the channel open,
- but not to pass it to another delivery process. */
+ /* Once we hit the max number of parallel transports set a flag indicating
+ whether there are further addresses that list the same host. This tells the
+ transport to leave the channel open for us. */
+/*XXX maybe we should *count* possible further's, and set continue_more if
+parmax * tpt-max is exceeded? */
- for (next = addr_remote; next != NULL; next = next->next)
+ if (parcount+1 >= remote_max_parallel)
+ {
+ host_item * h1 = addr->host_list;
+ if (h1)
{
- host_item *h;
- for (h = next->host_list; h != NULL; h = h->next)
- {
- if (Ustrcmp(h->name, continue_hostname) == 0)
- { continue_more = TRUE; break; }
- }
+ const uschar * name = continue_hostname ? continue_hostname : h1->name;
+ for (next = addr_remote; next && !f.continue_more; next = next->next)
+ for (host_item * h = next->host_list; h; h = h->next)
+ if (Ustrcmp(h->name, name) == 0)
+ { f.continue_more = TRUE; break; }
}
}
+ else DEBUG(D_deliver)
+ debug_printf(
+ "not reached parallelism limit (%d/%d) so not setting continue_more\n",
+ parcount+1, remote_max_parallel);
/* The transports set up the process info themselves as they may connect
to more than one remote machine. They also have to set up the filter
fails, it is probably because the value of remote_max_parallel is so
large that too many file descriptors for pipes have been created. Arrange
to wait for a process to finish, and then try again. If we still can't
- create a pipe when all processes have finished, break the retry loop. */
+ create a pipe when all processes have finished, break the retry loop.
+ Use socketpair() rather than pipe() so we can pass an fd back from the
+ transport process.
+ */
while (!pipe_done)
{
- if (pipe(pfd) == 0) pipe_done = TRUE;
- else if (parcount > 0) parmax = parcount;
- else break;
+ if (socketpair(AF_UNIX, SOCK_STREAM, 0, pfd) == 0) pipe_done = TRUE;
+ else if (parcount > 0) parmax = parcount;
+ else break;
/* We need to make the reading end of the pipe non-blocking. There are
two different options for this. Exim is cunningly (I hope!) coded so
that it can use either of them, though it prefers O_NONBLOCK, which
distinguishes between EOF and no-more-data. */
+/* The data appears in a timely manner and we already did a poll on
+all pipes, so I do not see a reason to use non-blocking IO here
+
#ifdef O_NONBLOCK
(void)fcntl(pfd[pipe_read], F_SETFL, O_NONBLOCK);
#else
(void)fcntl(pfd[pipe_read], F_SETFL, O_NDELAY);
#endif
+*/
/* If the maximum number of subprocesses already exist, wait for a process
to finish. If we ran out of file descriptors, parmax will have been reduced
if (!pipe_done)
{
- remote_post_process(addr, LOG_MAIN|LOG_PANIC,
- string_sprintf("unable to create pipe: %s", strerror(errno)), fallback);
- continue;
+ panicmsg = string_sprintf("unable to create pipe: %s", strerror(errno));
+ goto enq_continue;
}
/* Find a free slot in the pardata list. Must do this after the possible
up a slot. */
for (poffset = 0; poffset < remote_max_parallel; poffset++)
- if (parlist[poffset].pid == 0) break;
+ if (parlist[poffset].pid == 0)
+ break;
/* If there isn't one, there has been a horrible disaster. */
{
(void)close(pfd[pipe_write]);
(void)close(pfd[pipe_read]);
- remote_post_process(addr, LOG_MAIN|LOG_PANIC,
- US"Unexpectedly no free subprocess slot", fallback);
- continue;
+ panicmsg = US"Unexpectedly no free subprocess slot";
+ goto enq_continue;
}
/* Now fork a subprocess to do the remote delivery, but before doing so,
- ensure that any cached resourses are released so as not to interfere with
+ ensure that any cached resources are released so as not to interfere with
what happens in the subprocess. */
search_tidyup();
- if ((pid = fork()) == 0)
+/*
+A continued-tpt will, in the tpt parent here, call par_reduce for
+the one child. But we are hoping to never do continued-transport...
+SO.... we may have called par_reduce for a single child, above when we'd
+hit the limit on child-count. Possibly multiple times with different
+transports and target hosts. Does it matter if several return a suggested
+next-id, and we lose all but the last? Hmm. Less parallel working would
+happen. Perhaps still do continued-tpt once one has been set? No, that won't
+work for all cases.
+BAH.
+Could take the initial continued-tpt hit, and then do the next-id thing?
+
+do_remote_deliveries par_reduce par_wait par_read_pipe
+*/
+
+ /*XXX what about firsttime? */
+ /*XXX also, ph1? Note tp->name would possibly change per message,
+ so a check/close/open would be needed. Might want to change that var name
+ "continue_wait_db" as we'd be using it for a non-continued-transport
+ context. */
+ if (continue_transport && !exim_lockfile_needed())
+ if (!continue_wait_db)
+ {
+ continue_wait_db = dbfn_open_multi(
+ string_sprintf("wait-%.200s", continue_transport),
+ O_RDWR,
+ (open_db *) store_get(sizeof(open_db), GET_UNTAINTED));
+ continue_next_id[0] = '\0';
+ }
+
+ if ((pid = exim_fork(f.queue_2stage ? US"transport ph1":US"transport")) == 0)
{
int fd = pfd[pipe_write];
host_item *h;
- /* Setting this global in the subprocess means we need never clear it */
- transport_name = tp->name;
+ /* Setting these globals in the subprocess means we need never clear them */
+
+ transport_name = tp->drinst.name;
+ if (addr->router) router_name = addr->router->drinst.name;
+ driver_srcfile = tp->drinst.srcfile;
+ driver_srcline = tp->drinst.srcline;
/* There are weird circumstances in which logging is disabled */
- disable_logging = tp->disable_logging;
+ f.disable_logging = tp->disable_logging;
/* Show pids on debug output if parallelism possible */
- if (parmax > 1 && (parcount > 0 || addr_remote != NULL))
- {
+ if (parmax > 1 && (parcount > 0 || addr_remote))
DEBUG(D_any|D_v) debug_selector |= D_pid;
- DEBUG(D_deliver) debug_printf("Remote delivery process started\n");
- }
/* Reset the random number generator, so different processes don't all
have the same sequence. In the test harness we want different, but
predictable settings for each delivery process, so do something explicit
here rather they rely on the fixed reset in the random number function. */
- random_seed = running_in_test_harness? 42 + 2*delivery_count : 0;
+ random_seed = f.running_in_test_harness ? 42 + 2*delivery_count : 0;
/* Set close-on-exec on the pipe so that it doesn't get passed on to
a new process that may be forked to do another delivery down the same
a dup-with-new-file-pointer. */
(void)close(deliver_datafile);
- sprintf(CS spoolname, "%s/input/%s/%s-D", spool_directory, message_subdir,
- message_id);
- deliver_datafile = Uopen(spoolname, O_RDWR | O_APPEND, 0);
+ {
+ uschar * fname = spool_fname(US"input", message_subdir, message_id, US"-D");
- if (deliver_datafile < 0)
+ if ( (deliver_datafile = Uopen(fname, EXIM_CLOEXEC | O_RDWR | O_APPEND, 0))
+ < 0)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Failed to reopen %s for remote "
- "parallel delivery: %s", spoolname, strerror(errno));
-
- /* Set the close-on-exec flag */
+ "parallel delivery: %s", fname, strerror(errno));
+ }
+#ifndef O_CLOEXEC /* Set the close-on-exec flag */
(void)fcntl(deliver_datafile, F_SETFD, fcntl(deliver_datafile, F_GETFD) |
FD_CLOEXEC);
+#endif
/* Set the uid/gid of this process; bombs out on failure. */
exim_setugid(uid, gid, use_initgroups,
string_sprintf("remote delivery to %s with transport=%s",
- addr->address, tp->name));
+ addr->address, tp->drinst.name));
/* Close the unwanted half of this process' pipe, set the process state,
and run the transport. Afterwards, transport_count will contain the number
of bytes written. */
(void)close(pfd[pipe_read]);
- set_process_info("delivering %s using %s", message_id, tp->name);
+ set_process_info("delivering %s using %s", message_id, tp->drinst.name);
debug_print_string(tp->debug_string);
- if (!(tp->info->code)(addr->transport, addr)) replicate_status(addr);
+
+ {
+ transport_info * ti = tp->drinst.info;
+ if (!(ti->code)(addr->transport, addr)) /* Call the transport */
+ replicate_status(addr);
+ }
set_process_info("delivering %s (just run %s for %s%s in subprocess)",
- message_id, tp->name, addr->address, (addr->next == NULL)? "" : ", ...");
+ message_id, tp->drinst.name, addr->address, addr->next ? ", ..." : "");
/* Ensure any cached resources that we used are now released */
is flagged by an identifying byte, and is then in a fixed format (with
strings terminated by zeros), and there is a final terminator at the
end. The host information and retry information is all attached to
- the first address, so that gets sent at the start. */
+ the first address, so that gets sent at the start.
+
+ Result item tags:
+ A C D H I K L P R S T X Z
+ */
/* Host unusability information: for most success cases this will
be null. */
- for (h = addr->host_list; h != NULL; h = h->next)
+ for (h = addr->host_list; h; h = h->next)
{
- if (h->address == NULL || h->status < hstatus_unusable) continue;
+ if (!h->address || h->status < hstatus_unusable) continue;
sprintf(CS big_buffer, "%c%c%s", h->status, h->why, h->address);
- rmt_dlv_checked_write(fd, 'H', '0', big_buffer, Ustrlen(big_buffer+2) + 3);
+ rmt_dlv_checked_write(fd, 'H','0', big_buffer, Ustrlen(big_buffer+2) + 3);
}
/* The number of bytes written. This is the same for each address. Even
/* Information about what happened to each address. Four item types are
used: an optional 'X' item first, for TLS information, then an optional "C"
item for any client-auth info followed by 'R' items for any retry settings,
- and finally an 'A' item for the remaining data. */
+ and finally an 'A' item for the remaining data. The actual recipient address
+ is not sent but is implicit in the address-chain being handled. */
- for(; addr != NULL; addr = addr->next)
+ for(; addr; addr = addr->next)
{
- uschar *ptr;
- retry_item *r;
+ uschar * ptr;
- /* The certificate verification status goes into the flags */
+#ifndef DISABLE_TLS
+ /* The certificate verification status goes into the flags, in A0 */
if (tls_out.certificate_verified) setflag(addr, af_cert_verified);
-#ifdef EXPERIMENTAL_DANE
+# ifdef SUPPORT_DANE
if (tls_out.dane_verified) setflag(addr, af_dane_verified);
-#endif
+# endif
+# ifndef DISABLE_TLS_RESUME
+ if (tls_out.resumption & RESUME_USED) setflag(addr, af_tls_resume);
+# endif
/* Use an X item only if there's something to send */
-#ifdef SUPPORT_TLS
if (addr->cipher)
{
- ptr = big_buffer;
- sprintf(CS ptr, "%.128s", addr->cipher);
- while(*ptr++);
+ ptr = big_buffer + sprintf(CS big_buffer, "%.128s", addr->cipher) + 1;
if (!addr->peerdn)
*ptr++ = 0;
else
- {
- sprintf(CS ptr, "%.512s", addr->peerdn);
- while(*ptr++);
- }
+ ptr += sprintf(CS ptr, "%.512s", addr->peerdn) + 1;
rmt_dlv_checked_write(fd, 'X', '1', big_buffer, ptr - big_buffer);
}
+ else if (continue_proxy_cipher)
+ {
+ ptr = big_buffer + sprintf(CS big_buffer, "%.128s", continue_proxy_cipher) + 1;
+ *ptr++ = 0;
+ rmt_dlv_checked_write(fd, 'X', '1', big_buffer, ptr - big_buffer);
+ }
+
if (addr->peercert)
{
ptr = big_buffer;
- if (!tls_export_cert(ptr, big_buffer_size-2, addr->peercert))
+ if (tls_export_cert(ptr, big_buffer_size-2, addr->peercert))
while(*ptr++);
else
*ptr++ = 0;
if (addr->ourcert)
{
ptr = big_buffer;
- if (!tls_export_cert(ptr, big_buffer_size-2, addr->ourcert))
+ if (tls_export_cert(ptr, big_buffer_size-2, addr->ourcert))
while(*ptr++);
else
*ptr++ = 0;
# ifndef DISABLE_OCSP
if (addr->ocsp > OCSP_NOT_REQ)
{
- ptr = big_buffer;
- sprintf(CS ptr, "%c", addr->ocsp + '0');
- while(*ptr++);
+ ptr = big_buffer + sprintf(CS big_buffer, "%c", addr->ocsp + '0') + 1;
rmt_dlv_checked_write(fd, 'X', '4', big_buffer, ptr - big_buffer);
}
# endif
-#endif /*SUPPORT_TLS*/
+#endif /*DISABLE_TLS*/
if (client_authenticator)
{
- ptr = big_buffer;
- sprintf(CS big_buffer, "%.64s", client_authenticator);
- while(*ptr++);
+ ptr = big_buffer + sprintf(CS big_buffer, "%.64s", client_authenticator) + 1;
rmt_dlv_checked_write(fd, 'C', '1', big_buffer, ptr - big_buffer);
}
if (client_authenticated_id)
{
- ptr = big_buffer;
- sprintf(CS big_buffer, "%.64s", client_authenticated_id);
- while(*ptr++);
+ ptr = big_buffer + sprintf(CS big_buffer, "%.64s", client_authenticated_id) + 1;
rmt_dlv_checked_write(fd, 'C', '2', big_buffer, ptr - big_buffer);
}
if (client_authenticated_sender)
{
- ptr = big_buffer;
- sprintf(CS big_buffer, "%.64s", client_authenticated_sender);
- while(*ptr++);
+ ptr = big_buffer + sprintf(CS big_buffer, "%.64s", client_authenticated_sender) + 1;
rmt_dlv_checked_write(fd, 'C', '3', big_buffer, ptr - big_buffer);
}
#ifndef DISABLE_PRDR
- if (addr->flags & af_prdr_used)
+ if (testflag(addr, af_prdr_used))
rmt_dlv_checked_write(fd, 'P', '0', NULL, 0);
#endif
+ if (testflag(addr, af_pipelining))
+#ifndef DISABLE_PIPE_CONNECT
+ if (testflag(addr, af_early_pipe))
+ rmt_dlv_checked_write(fd, 'L', '2', NULL, 0);
+ else
+#endif
+ rmt_dlv_checked_write(fd, 'L', '1', NULL, 0);
+
+ if (testflag(addr, af_chunking_used))
+ rmt_dlv_checked_write(fd, 'K', '0', NULL, 0);
+
+ if (testflag(addr, af_tcp_fastopen_conn))
+ rmt_dlv_checked_write(fd, 'T',
+ testflag(addr, af_tcp_fastopen) ? testflag(addr, af_tcp_fastopen_data)
+ ? '2' : '1' : '0',
+ NULL, 0);
+
memcpy(big_buffer, &addr->dsn_aware, sizeof(addr->dsn_aware));
rmt_dlv_checked_write(fd, 'D', '0', big_buffer, sizeof(addr->dsn_aware));
- DEBUG(D_deliver) debug_printf("DSN write: addr->dsn_aware = %d\n", addr->dsn_aware);
/* Retry information: for most success cases this will be null. */
- for (r = addr->retries; r != NULL; r = r->next)
+ for (retry_item * r = addr->retries; r; r = r->next)
{
- uschar *ptr;
sprintf(CS big_buffer, "%c%.500s", r->flags, r->key);
ptr = big_buffer + Ustrlen(big_buffer+2) + 3;
- memcpy(ptr, &(r->basic_errno), sizeof(r->basic_errno));
+ memcpy(ptr, &r->basic_errno, sizeof(r->basic_errno));
ptr += sizeof(r->basic_errno);
- memcpy(ptr, &(r->more_errno), sizeof(r->more_errno));
+ memcpy(ptr, &r->more_errno, sizeof(r->more_errno));
ptr += sizeof(r->more_errno);
- if (r->message == NULL) *ptr++ = 0; else
+ if (!r->message) *ptr++ = 0; else
{
sprintf(CS ptr, "%.512s", r->message);
while(*ptr++);
rmt_dlv_checked_write(fd, 'R', '0', big_buffer, ptr - big_buffer);
}
- /* The rest of the information goes in an 'A' item. */
+#ifndef DISABLE_DKIM
+ if (addr->dkim_used && LOGGING(dkim_verbose))
+ {
+ DEBUG(D_deliver) debug_printf("dkim used: %s\n", addr->dkim_used);
+ ptr = big_buffer + sprintf(CS big_buffer, "%.128s", addr->dkim_used) + 1;
+ rmt_dlv_checked_write(fd, 'A', '4', big_buffer, ptr - big_buffer);
+ }
+#endif
+
+ if (testflag(addr, af_new_conn) || testflag(addr, af_cont_conn))
+ {
+ DEBUG(D_deliver) debug_printf("%scontinued-connection\n",
+ testflag(addr, af_new_conn) ? "non-" : "");
+ big_buffer[0] = testflag(addr, af_new_conn) ? BIT(1) : BIT(2);
+ rmt_dlv_checked_write(fd, 'A', '3', big_buffer, 1);
+ }
+
+#ifdef SUPPORT_SOCKS
+ if (LOGGING(proxy) && proxy_session)
+ {
+ ptr = big_buffer;
+ if (proxy_local_address)
+ {
+ DEBUG(D_deliver) debug_printf("proxy_local_address '%s'\n", proxy_local_address);
+ ptr = big_buffer + sprintf(CS ptr, "%.128s", proxy_local_address) + 1;
+ DEBUG(D_deliver) debug_printf("proxy_local_port %d\n", proxy_local_port);
+ memcpy(ptr, &proxy_local_port, sizeof(proxy_local_port));
+ ptr += sizeof(proxy_local_port);
+ }
+ else
+ *ptr++ = '\0';
+ rmt_dlv_checked_write(fd, 'A', '2', big_buffer, ptr - big_buffer);
+ }
+#endif
+
+#ifdef EXPERIMENTAL_DSN_INFO
+/*um, are they really per-addr? Other per-conn stuff is not (auth, tls). But host_used is! */
+ if (addr->smtp_greeting)
+ {
+ DEBUG(D_deliver) debug_printf("smtp_greeting '%s'\n", addr->smtp_greeting);
+ ptr = big_buffer + sprintf(CS big_buffer, "%.128s", addr->smtp_greeting) + 1;
+ if (addr->helo_response)
+ {
+ DEBUG(D_deliver) debug_printf("helo_response '%s'\n", addr->helo_response);
+ ptr += sprintf(CS ptr, "%.128s", addr->helo_response) + 1;
+ }
+ else
+ *ptr++ = '\0';
+ rmt_dlv_checked_write(fd, 'A', '1', big_buffer, ptr - big_buffer);
+ }
+#endif
+ /* The rest of the information goes in an 'A0' item. */
+#ifdef notdef
+ DEBUG(D_deliver)
+ debug_printf("%s %s for MAIL\n",
+ addr->special_action == '=' ? "initial RCPT"
+ : addr->special_action == '-' ? "additional RCPT" : "?",
+ addr->address);
+#endif
+ sprintf(CS big_buffer, "%c%c", addr->transport_return, addr->special_action);
ptr = big_buffer + 2;
- sprintf(CS big_buffer, "%c%c", addr->transport_return,
- addr->special_action);
- memcpy(ptr, &(addr->basic_errno), sizeof(addr->basic_errno));
+ memcpy(ptr, &addr->basic_errno, sizeof(addr->basic_errno));
ptr += sizeof(addr->basic_errno);
- memcpy(ptr, &(addr->more_errno), sizeof(addr->more_errno));
+ memcpy(ptr, &addr->more_errno, sizeof(addr->more_errno));
ptr += sizeof(addr->more_errno);
- memcpy(ptr, &(addr->flags), sizeof(addr->flags));
+ memcpy(ptr, &addr->delivery_time, sizeof(addr->delivery_time));
+ ptr += sizeof(addr->delivery_time);
+ memcpy(ptr, &addr->flags, sizeof(addr->flags));
ptr += sizeof(addr->flags);
- if (addr->message == NULL) *ptr++ = 0; else
- {
- sprintf(CS ptr, "%.1024s", addr->message);
- while(*ptr++);
- }
+ if (!addr->message) *ptr++ = 0; else
+ ptr += sprintf(CS ptr, "%.1024s", addr->message) + 1;
- if (addr->user_message == NULL) *ptr++ = 0; else
- {
- sprintf(CS ptr, "%.1024s", addr->user_message);
- while(*ptr++);
- }
+ if (!addr->user_message) *ptr++ = 0; else
+ ptr += sprintf(CS ptr, "%.1024s", addr->user_message) + 1;
- if (addr->host_used == NULL) *ptr++ = 0; else
+ if (!addr->host_used) *ptr++ = 0; else
{
- sprintf(CS ptr, "%.256s", addr->host_used->name);
- while(*ptr++);
- sprintf(CS ptr, "%.64s", addr->host_used->address);
- while(*ptr++);
- memcpy(ptr, &(addr->host_used->port), sizeof(addr->host_used->port));
+ ptr += sprintf(CS ptr, "%.256s", addr->host_used->name) + 1;
+ ptr += sprintf(CS ptr, "%.64s", addr->host_used->address) + 1;
+ memcpy(ptr, &addr->host_used->port, sizeof(addr->host_used->port));
ptr += sizeof(addr->host_used->port);
/* DNS lookup status */
rmt_dlv_checked_write(fd, 'A', '0', big_buffer, ptr - big_buffer);
}
+ /* Local interface address/port */
+#ifdef EXPERIMENTAL_DSN_INFO
+ if (sending_ip_address)
+#else
+ if (LOGGING(incoming_interface) && sending_ip_address)
+#endif
+ {
+ uschar * ptr = big_buffer
+ + sprintf(CS big_buffer, "%.128s", sending_ip_address) + 1;
+ ptr += sprintf(CS ptr, "%d", sending_port) + 1;
+ rmt_dlv_checked_write(fd, 'I', '0', big_buffer, ptr - big_buffer);
+ }
+
+ /* Continuation message-id, if a continuation is for that reason,
+ and the next sequence number (MAIL FROM count) for the connection. */
+
+ if (*continue_next_id)
+ rmt_dlv_checked_write(fd, 'Z', '1', big_buffer,
+ sprintf(CS big_buffer, "%.*s %u",
+ MESSAGE_ID_LENGTH, continue_next_id, continue_sequence+1) + 1);
+
+ /* Connection details, only on the first suggested continuation for
+ wait-db ones, but for all continue-more ones (though any after the
+ delivery proc has the info are pointless). */
+
+ if (continue_hostname && continue_fd >= 0)
+ {
+ {
+ uschar * ptr = big_buffer;
+ ptr += sprintf(CS ptr, "%.128s", continue_transport) + 1;
+ ptr += sprintf(CS ptr, "%.128s", continue_hostname) + 1;
+ ptr += sprintf(CS ptr, "%.128s", continue_host_address) + 1;
+ ptr += sprintf(CS ptr, "%u", continue_sequence+1) + 1;
+ rmt_dlv_checked_write(fd, 'Z', '2', big_buffer, ptr - big_buffer);
+ send_fd_over_socket(fd, continue_fd);
+ }
+
+ big_buffer[0] = smtp_peer_options;
+ big_buffer[1] = f.smtp_authenticated ? 1 : 0;
+ rmt_dlv_checked_write(fd, 'Z', '3', big_buffer, 2);
+
+ if (tls_out.active.sock >= 0 || continue_proxy_cipher)
+ rmt_dlv_checked_write(fd, 'Z', '4', big_buffer,
+ sprintf(CS big_buffer, "%.128s", continue_proxy_cipher) + 1);
+
+ if (tls_out.sni)
+ rmt_dlv_checked_write(fd, 'Z',
+#ifdef SUPPORT_DANE
+ tls_out.dane_verified ? '5' : '6',
+#else
+ '6',
+#endif
+ tls_out.sni, Ustrlen(tls_out.sni)+1);
+
+#ifndef DISABLE_ESMTP_LIMITS
+ if (continue_limit_mail || continue_limit_rcpt || continue_limit_rcptdom)
+ rmt_dlv_checked_write(fd, 'Z', '7', big_buffer,
+ sprintf(CS big_buffer, "%u %u %u",
+ continue_limit_mail, continue_limit_rcpt,
+ continue_limit_rcptdom) + 1);
+#endif
+
+#ifdef SUPPORT_SOCKS
+ if (proxy_session)
+ {
+ uschar * ptr = big_buffer;
+ ptr += sprintf(CS ptr, "%.128s", proxy_local_address) + 1;
+ ptr += sprintf(CS ptr, "%u", proxy_local_port) + 1;
+ ptr += sprintf(CS ptr, "%.128s", proxy_external_address) + 1;
+ ptr += sprintf(CS ptr, "%u", proxy_external_port) + 1;
+ rmt_dlv_checked_write(fd, 'Z', '8', big_buffer, ptr - big_buffer);
+ }
+#endif
+ }
+
/* Add termination flag, close the pipe, and that's it. The character
- after 'Z' indicates whether continue_transport is now NULL or not.
+ after "Z0" indicates whether continue_transport is now NULL or not.
A change from non-NULL to NULL indicates a problem with a continuing
connection. */
- big_buffer[0] = (continue_transport == NULL)? '0' : '1';
+ big_buffer[0] = continue_transport ? '1' : '0';
rmt_dlv_checked_write(fd, 'Z', '0', big_buffer, 1);
(void)close(fd);
- exit(EXIT_SUCCESS);
+ exim_exit(EXIT_SUCCESS);
}
/* Back in the mainline: close the unwanted half of the pipe. */
(void)close(pfd[pipe_write]);
+ /* If we have a connection still open from a verify stage (lazy-close)
+ release its TLS library context (if any) as responsibility was passed to
+ the delivery child process. */
+
+ if (cutthrough.cctx.sock >= 0 && cutthrough.callout_hold_only)
+ {
+#ifndef DISABLE_TLS
+ if (cutthrough.is_tls)
+ tls_close(cutthrough.cctx.tls_ctx, TLS_NO_SHUTDOWN);
+#endif
+ (void) close(cutthrough.cctx.sock);
+ release_cutthrough_connection(US"passed to transport proc");
+ }
+
/* Fork failed; defer with error message */
- if (pid < 0)
+ if (pid == -1)
{
(void)close(pfd[pipe_read]);
- remote_post_process(addr, LOG_MAIN|LOG_PANIC,
- string_sprintf("fork failed for remote delivery to %s: %s",
- addr->domain, strerror(errno)), fallback);
- continue;
+ panicmsg = string_sprintf("fork failed for remote delivery to %s: %s",
+ addr->domain, strerror(errno));
+ goto enq_continue;
}
/* Fork succeeded; increment the count, and remember relevant data for
(continue_transport gets set to NULL) before we consider any other addresses
in this message. */
- if (continue_transport != NULL) par_reduce(0, fallback);
+ if (continue_transport)
+ {
+ par_reduce(0, fallback);
+ if (!*continue_next_id && continue_wait_db)
+ { dbfn_close_multi(continue_wait_db); continue_wait_db = NULL; }
+
+ /* After the first ATRN message on the channel the EHLO has been dealt with;
+ ensure subsequence ones do not do that. */
+
+ atrn_domains = NULL;
+ }
/* Otherwise, if we are running in the test harness, wait a bit, to let the
newly created process get going before we create another process. This should
- ensure repeatability in the tests. We only need to wait a tad. */
+ ensure repeatability in the tests. Wait long enough for most cases to complete
+ the transport. */
+
+ else
+ testharness_pause_ms(600);
+
+ continue;
- else if (running_in_test_harness) millisleep(500);
+enq_continue:
+ if (serialize_key) enq_end(serialize_key);
+panic_continue:
+ remote_post_process(addr, LOG_MAIN|LOG_PANIC, panicmsg, fallback);
+ continue;
}
/* Reached the end of the list of addresses. Wait for all the subprocesses that
*/
int
-deliver_split_address(address_item *addr)
+deliver_split_address(address_item * addr)
{
-uschar *address = addr->address;
-uschar *domain = Ustrrchr(address, '@');
-uschar *t;
-int len = domain - address;
+const uschar * address = addr->address;
+uschar * domain;
+uschar * t;
+int len;
+if (!(domain = Ustrrchr(address, '@')))
+ return DEFER; /* should always have a domain, but just in case... */
+
+len = domain - address;
addr->domain = string_copylc(domain+1); /* Domains are always caseless */
/* The implication in the RFCs (though I can't say I've seen it spelled out
this, Jan 1999.] We know the syntax is valid, so this can be done by simply
removing quoting backslashes and any unquoted doublequotes. */
-t = addr->cc_local_part = store_get(len+1);
+addr->cc_local_part = t = store_get(len+1, address);
while(len-- > 0)
{
- register int c = *address++;
+ int c = *address++;
if (c == '\"') continue;
if (c == '\\')
{
}
else *t++ = c;
}
-*t = 0;
+*t = '\0';
/* We do the percent hack only for those domains that are listed in
percent_hack_domains. A loop is required, to copy with multiple %-hacks. */
-if (percent_hack_domains != NULL)
+if (percent_hack_domains)
{
int rc;
- uschar *new_address = NULL;
- uschar *local_part = addr->cc_local_part;
+ uschar * new_address = NULL;
+ const uschar * local_part = addr->cc_local_part;
deliver_domain = addr->domain; /* set $domain */
- while ((rc = match_isinlist(deliver_domain, &percent_hack_domains, 0,
- &domainlist_anchor, addr->domain_cache, MCL_DOMAIN, TRUE, NULL))
- == OK &&
- (t = Ustrrchr(local_part, '%')) != NULL)
+ while ( (rc = match_isinlist(deliver_domain, (const uschar **)&percent_hack_domains, 0,
+ &domainlist_anchor, addr->domain_cache, MCL_DOMAIN, TRUE, NULL))
+ == OK
+ && (t = Ustrrchr(local_part, '%')) != NULL
+ )
{
new_address = string_copy(local_part);
new_address[t - local_part] = '@';
/* If hackery happened, set up new parent and alter the current address. */
- if (new_address != NULL)
+ if (new_address)
{
- address_item *new_parent = store_get(sizeof(address_item));
+ address_item * new_parent = store_get(sizeof(address_item), GET_UNTAINTED);
*new_parent = *addr;
addr->parent = new_parent;
+ new_parent->child_count = 1;
addr->address = new_address;
addr->unique = string_copy(new_address);
addr->domain = deliver_domain;
static uschar *
next_emf(FILE *f, uschar *which)
{
-int size = 256;
-int ptr = 0;
-uschar *para, *yield;
+uschar *yield;
+gstring * para;
uschar buffer[256];
-if (f == NULL) return NULL;
+if (!f) return NULL;
-if (Ufgets(buffer, sizeof(buffer), f) == NULL ||
- Ustrcmp(buffer, "****\n") == 0) return NULL;
+if (!Ufgets(buffer, sizeof(buffer), f) || Ustrcmp(buffer, "****\n") == 0)
+ return NULL;
-para = store_get(size);
+para = string_get(256);
for (;;)
{
- para = string_cat(para, &size, &ptr, buffer, Ustrlen(buffer));
- if (Ufgets(buffer, sizeof(buffer), f) == NULL ||
- Ustrcmp(buffer, "****\n") == 0) break;
+ para = string_cat(para, buffer);
+ if (!Ufgets(buffer, sizeof(buffer), f) || Ustrcmp(buffer, "****\n") == 0)
+ break;
}
-para[ptr] = 0;
-
-yield = expand_string(para);
-if (yield != NULL) return yield;
+if ((yield = expand_string(string_from_gstring(para))))
+ return yield;
log_write(0, LOG_MAIN|LOG_PANIC, "Failed to expand string from "
"bounce_message_file or warn_message_file (%s): %s", which,
static int
continue_closedown(void)
{
-if (continue_transport != NULL)
- {
- transport_instance *t;
- for (t = transports; t != NULL; t = t->next)
- {
- if (Ustrcmp(t->name, continue_transport) == 0)
+if (continue_transport)
+ for (transport_instance * t = transports; t; t = t->drinst.next)
+ if (Ustrcmp(t->drinst.name, continue_transport) == 0)
{
- if (t->info->closedown != NULL) (t->info->closedown)(t);
+ transport_info * ti = t->drinst.info;
+ if (ti->closedown) (ti->closedown)(t);
+ continue_transport = NULL;
break;
}
- }
- }
return DELIVER_NOT_ATTEMPTED;
}
*/
static BOOL
-print_address_information(address_item *addr, FILE *f, uschar *si, uschar *sc,
- uschar *se)
+print_address_information(address_item * addr, FILE * f, uschar * si,
+ uschar * sc, uschar * se)
{
BOOL yield = TRUE;
-uschar *printed = US"";
-address_item *ancestor = addr;
-while (ancestor->parent != NULL) ancestor = ancestor->parent;
+const uschar * printed = US"";
+address_item * ancestor = addr;
+while (ancestor->parent) ancestor = ancestor->parent;
fprintf(f, "%s", CS si);
-if (addr->parent != NULL && testflag(addr, af_hide_child))
+if (addr->parent && testflag(addr, af_hide_child))
{
printed = US"an undisclosed address";
yield = FALSE;
}
-else if (!testflag(addr, af_pfr) || addr->parent == NULL)
+else if (!testflag(addr, af_pfr) || !addr->parent)
printed = addr->address;
else
{
- uschar *s = addr->address;
- uschar *ss;
+ const uschar * s = addr->address;
+ const uschar * ss;
if (addr->address[0] == '>') { ss = US"mail"; s++; }
else if (addr->address[0] == '|') ss = US"pipe";
if (ancestor != addr)
{
- uschar *original = (ancestor->onetime_parent == NULL)?
- ancestor->address : ancestor->onetime_parent;
+ const uschar * original = ancestor->onetime_parent;
+ if (!original) original= ancestor->address;
if (strcmpic(original, printed) != 0)
fprintf(f, "%s(%sgenerated from %s)", sc,
- (ancestor != addr->parent)? "ultimately " : "",
+ ancestor != addr->parent ? "ultimately " : "",
string_printing(original));
}
*/
static void
-print_address_error(address_item *addr, FILE *f, uschar *t)
+print_address_error(address_item * addr, FILE * f, const uschar * t)
{
int count = Ustrlen(t);
-uschar *s = testflag(addr, af_pass_message)? addr->message : NULL;
+uschar * s = testflag(addr, af_pass_message) ? addr->message : NULL;
-if (s == NULL)
- {
- if (addr->user_message != NULL) s = addr->user_message; else return;
- }
+if (!s && !(s = addr->user_message))
+ return;
fprintf(f, "\n %s", t);
-while (*s != 0)
- {
+while (*s)
if (*s == '\\' && s[1] == 'n')
{
fprintf(f, "\n ");
fprintf(f, "\n "); /* sic (because space follows) */
count = 0;
}
+ else if (count > 254) /* arbitrary limit */
+ {
+ fprintf(f, "[truncated]");
+ do s++; while (*s && !(*s == '\\' && s[1] == '\n'));
+ }
}
- }
}
a bounce or a warning message. It tries to format the message reasonably as
required by RFC 3461 by adding a space after each newline
-we assume that this function is only called if addr->host_used is set and if so
-a useable addr->message is available containing some Exim description with ": \n"
-ending, followed by the L/SMTP error message.
+it uses the same logic as print_address_error() above. if af_pass_message is true
+and addr->message is set it uses the remote host answer. if not addr->user_message
+is used instead if available.
Arguments:
addr the address
static void
print_dsn_diagnostic_code(const address_item *addr, FILE *f)
{
-uschar * s;
+uschar * s = testflag(addr, af_pass_message) ? addr->message : NULL;
+unsigned cnt;
-/* check host_used, af_pass_message flag and addr->message for safety reasons */
-if (!addr->host_used && testflag(addr, af_pass_message) && addr->message)
+/* af_pass_message and addr->message set ? print remote host answer */
+if (!s)
return;
-/* search first ": ". we assume to find the remote-MTA answer there */
DEBUG(D_deliver)
- debug_printf("DSN Diagnostic-Code: addr->dsn_message = %s\n", addr->message);
+ debug_printf("DSN Diagnostic-Code: addr->message = %s\n", addr->message);
+
+/* search first ": ". we assume to find the remote-MTA answer there */
if (!(s = Ustrstr(addr->message, ": ")))
return; /* not found, bail out */
-fprintf(f, "Diagnostic-Code: smtp; ");
-
s += 2; /* skip ": " */
+cnt = fprintf(f, "Diagnostic-Code: smtp; ");
+
while (*s)
+ {
+ if (cnt > 950) /* RFC line length limit: 998 */
+ {
+ DEBUG(D_deliver) debug_printf("print_dsn_diagnostic_code() truncated line\n");
+ fputs("[truncated]", f);
+ break;
+ }
+
if (*s == '\\' && s[1] == 'n')
{
fputs("\n ", f); /* as defined in RFC 3461 */
s += 2;
+ cnt += 2;
}
else
+ {
fputc(*s++, f);
+ cnt++;
+ }
+ }
fputc('\n', f);
}
*/
static void
-do_duplicate_check(address_item **anchor)
+do_duplicate_check(address_item ** anchor)
{
-address_item *addr;
-while ((addr = *anchor) != NULL)
+address_item * addr;
+while ((addr = *anchor))
{
- tree_node *tnode;
+ tree_node * tnode;
if (testflag(addr, af_pfr))
- {
- anchor = &(addr->next);
- }
- else if ((tnode = tree_search(tree_duplicates, addr->unique)) != NULL)
+ anchor = &addr->next;
+ else if ((tnode = tree_search(tree_duplicates, addr->unique)))
{
DEBUG(D_deliver|D_route)
debug_printf("%s is a duplicate address: discarded\n", addr->unique);
else
{
tree_add_duplicate(addr->unique, addr);
- anchor = &(addr->next);
+ anchor = &addr->next;
}
}
}
-/*************************************************
-* Deliver one message *
+/************************************************/
+
+static void
+print_dsn_addr_action(FILE * f, address_item * addr,
+ uschar * action, uschar * status)
+{
+address_item * pa;
+
+if (addr->dsn_orcpt)
+ fprintf(f,"Original-Recipient: %s\n", addr->dsn_orcpt);
+
+for (pa = addr; pa->parent; ) pa = pa->parent;
+fprintf(f, "Action: %s\n"
+ "Final-Recipient: rfc822;%s\n"
+ "Status: %s\n",
+ action, pa->address, status);
+}
+
+
+
+/* When running in the test harness, there's an option that allows us to
+fudge this time so as to get repeatability of the tests. Take the first
+time off the list. In queue runs, the list pointer gets updated in the
+calling process. */
+
+int
+test_harness_fudged_queue_time(int actual_time)
+{
+int qt;
+if ( f.running_in_test_harness && *fudged_queue_times
+ && (qt = readconf_readtime(fudged_queue_times, '/', FALSE)) >= 0)
+ {
+ DEBUG(D_deliver) debug_printf("fudged queue_times = %s\n",
+ fudged_queue_times);
+ return qt;
+ }
+return actual_time;
+}
+
+/************************************************/
+
+static FILE *
+expand_open(const uschar * filename,
+ const uschar * optname, const uschar * reason)
+{
+const uschar * s = expand_cstring(filename);
+FILE * fp = NULL;
+
+if (!s || !*s)
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "Failed to expand %s: '%s'\n", optname, filename);
+else if (*s != '/' || is_tainted(s))
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "%s is not %s after expansion: '%s'\n",
+ optname, *s == '/' ? "untainted" : "absolute", s);
+else if (!(fp = Ufopen(s, "rb")))
+ log_write(0, LOG_MAIN|LOG_PANIC, "Failed to open %s for %s "
+ "message texts: %s", s, reason, strerror(errno));
+return fp;
+}
+
+
+/* Output the given header and string, converting either
+the sequence "\n" or a real newline into newline plus space.
+If that still takes us past column 78, look for the last space
+and split there too.
+Append a newline if string did not have one.
+Limit to about 1024 chars total. */
+
+static void
+dsn_put_wrapped(FILE * fp, const uschar * header, const uschar * s)
+{
+gstring * g = string_cat(NULL, header);
+
+g = string_cat(g, s);
+gstring_release_unused(g);
+fprintf(fp, "%s\n", wrap_header(string_from_gstring(g), 79, 1023, US" ", 1));
+}
+
+
+
+
+/*************************************************
+* Send a bounce message *
+*************************************************/
+
+/* Find the error address for the first address, then send a message that
+includes all failed addresses that have the same error address. Note the
+bounce_recipient is a global so that it can be accessed by $bounce_recipient
+while creating a customized error message. */
+
+static void
+send_bounce_message(time_t now, const uschar * logtod)
+{
+pid_t pid;
+int fd;
+
+if (!(bounce_recipient = addr_failed->prop.errors_address))
+ bounce_recipient = sender_address;
+
+/* Make a subprocess to send a message, using its stdin */
+
+if ((pid = child_open_exim(&fd, US"bounce-message")) < 0)
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Process %ld (parent %ld) failed to "
+ "create child process to send failure message: %s",
+ (long)getpid(), (long)getppid(), strerror(errno));
+
+/* Creation of child succeeded */
+
+else
+ {
+ int ch, rc, filecount = 0, rcount = 0;
+ uschar * bcc, * emf_text;
+ FILE * fp = fdopen(fd, "wb"), * emf = NULL;
+ BOOL to_sender = strcmpic(sender_address, bounce_recipient) == 0;
+ int max = (bounce_return_size_limit/DELIVER_IN_BUFFER_SIZE + 1) *
+ DELIVER_IN_BUFFER_SIZE;
+ uschar * bound, * dsnlimitmsg, * dsnnotifyhdr;
+ int topt;
+ address_item ** paddr;
+ address_item * msgchain = NULL, ** pmsgchain = &msgchain;
+ address_item * handled_addr = NULL;
+
+ DEBUG(D_deliver)
+ debug_printf("sending error message to: %s\n", bounce_recipient);
+
+ /* Scan the addresses for all that have the same errors address, removing
+ them from the addr_failed chain, and putting them on msgchain. */
+
+ paddr = &addr_failed;
+ for (address_item * addr = addr_failed; addr; addr = *paddr)
+ if (Ustrcmp(bounce_recipient, addr->prop.errors_address
+ ? addr->prop.errors_address : sender_address) == 0)
+ { /* The same - dechain */
+ *paddr = addr->next;
+ *pmsgchain = addr;
+ addr->next = NULL;
+ pmsgchain = &addr->next;
+ }
+ else
+ paddr = &addr->next; /* Not the same; skip */
+
+ /* Include X-Failed-Recipients: for automatic interpretation, but do
+ not let any one header line get too long. We do this by starting a
+ new header every 50 recipients. Omit any addresses for which the
+ "hide_child" flag is set. */
+
+ for (address_item * addr = msgchain; addr; addr = addr->next)
+ {
+ if (testflag(addr, af_hide_child)) continue;
+ if (rcount >= 50)
+ {
+ fprintf(fp, "\n");
+ rcount = 0;
+ }
+ fprintf(fp, "%s%s",
+ rcount++ == 0
+ ? "X-Failed-Recipients: "
+ : ",\n ",
+ testflag(addr, af_pfr) && addr->parent
+ ? string_printing(addr->parent->address)
+ : string_printing(addr->address));
+ }
+ if (rcount > 0) fprintf(fp, "\n");
+
+ /* Output the standard headers */
+
+ if (errors_reply_to)
+ fprintf(fp, "Reply-To: %s\n", errors_reply_to);
+ fprintf(fp, "Auto-Submitted: auto-replied\n");
+ moan_write_from(fp);
+ fprintf(fp, "To: %s\n", bounce_recipient);
+ moan_write_references(fp, NULL);
+
+ /* generate boundary string and output MIME-Headers */
+ bound = string_sprintf(TIME_T_FMT "-eximdsn-%d", time(NULL), rand());
+
+ fprintf(fp, "Content-Type: multipart/report;"
+ " report-type=delivery-status; boundary=%s\n"
+ "MIME-Version: 1.0\n",
+ bound);
+
+ /* Open a template file if one is provided. Log failure to open, but
+ carry on - default texts will be used. */
+
+ GET_OPTION("bounce_message_file");
+ if (bounce_message_file)
+ emf = expand_open(bounce_message_file,
+ US"bounce_message_file", US"error");
+
+ /* Quietly copy to configured additional addresses if required. */
+
+ if ((bcc = moan_check_errorcopy(bounce_recipient)))
+ fprintf(fp, "Bcc: %s\n", bcc);
+
+ /* The texts for the message can be read from a template file; if there
+ isn't one, or if it is too short, built-in texts are used. The first
+ emf text is a Subject: and any other headers. */
+
+ if ((emf_text = next_emf(emf, US"header")))
+ fprintf(fp, "%s\n", emf_text);
+ else
+ fprintf(fp, "Subject: Mail delivery failed%s\n\n",
+ to_sender? ": returning message to sender" : "");
+
+ /* output human readable part as text/plain section */
+ fprintf(fp, "--%s\n"
+ "Content-type: text/plain; charset=us-ascii\n\n",
+ bound);
+
+ if ((emf_text = next_emf(emf, US"intro")))
+ fprintf(fp, "%s", CS emf_text);
+ else
+ {
+ fprintf(fp,
+/* This message has been reworded several times. It seems to be confusing to
+somebody, however it is worded. I have retreated to the original, simple
+wording. */
+"This message was created automatically by mail delivery software.\n");
+
+ if (bounce_message_text)
+ fprintf(fp, "%s", CS bounce_message_text);
+ if (to_sender)
+ fprintf(fp,
+"\nA message that you sent could not be delivered to one or more of its\n"
+"recipients. This is a permanent error. The following address(es) failed:\n");
+ else
+ fprintf(fp,
+"\nA message sent by\n\n <%s>\n\n"
+"could not be delivered to one or more of its recipients. The following\n"
+"address(es) failed:\n", sender_address);
+ }
+ fputc('\n', fp);
+
+ /* Process the addresses, leaving them on the msgchain if they have a
+ file name for a return message. (There has already been a check in
+ post_process_one() for the existence of data in the message file.) A TRUE
+ return from print_address_information() means that the address is not
+ hidden. */
+
+ paddr = &msgchain;
+ for (address_item * addr = msgchain; addr; addr = *paddr)
+ {
+ if (print_address_information(addr, fp, US" ", US"\n ", US""))
+ print_address_error(addr, fp, US"");
+
+ /* End the final line for the address */
+
+ fputc('\n', fp);
+
+ /* Leave on msgchain if there's a return file. */
+
+ if (addr->return_file >= 0)
+ {
+ paddr = &addr->next;
+ filecount++;
+ }
+
+ /* Else save so that we can tick off the recipient when the
+ message is sent. */
+
+ else
+ {
+ *paddr = addr->next;
+ addr->next = handled_addr;
+ handled_addr = addr;
+ }
+ }
+
+ fputc('\n', fp);
+
+ /* Get the next text, whether we need it or not, so as to be
+ positioned for the one after. */
+
+ emf_text = next_emf(emf, US"generated text");
+
+ /* If there were any file messages passed by the local transports,
+ include them in the message. Then put the address on the handled chain.
+ In the case of a batch of addresses that were all sent to the same
+ transport, the return_file field in all of them will contain the same
+ fd, and the return_filename field in the *last* one will be set (to the
+ name of the file). */
+
+ if (msgchain)
+ {
+ address_item * nextaddr;
+
+ if (emf_text)
+ fprintf(fp, "%s", CS emf_text);
+ else
+ fprintf(fp,
+ "The following text was generated during the delivery "
+ "attempt%s:\n", (filecount > 1)? "s" : "");
+
+ for (address_item * addr = msgchain; addr; addr = nextaddr)
+ {
+ FILE *fm;
+ address_item *topaddr = addr;
+
+ /* List all the addresses that relate to this file */
+
+ fputc('\n', fp);
+ while(addr) /* Insurance */
+ {
+ print_address_information(addr, fp, US"------ ", US"\n ",
+ US" ------\n");
+ if (addr->return_filename) break;
+ addr = addr->next;
+ }
+ fputc('\n', fp);
+
+ /* Now copy the file */
+
+ if (!(fm = Ufopen(addr->return_filename, "rb")))
+ fprintf(fp, " +++ Exim error... failed to open text file: %s\n",
+ strerror(errno));
+ else
+ {
+ while ((ch = fgetc(fm)) != EOF) fputc(ch, fp);
+ (void)fclose(fm);
+ }
+ Uunlink(addr->return_filename);
+
+ /* Can now add to handled chain, first fishing off the next
+ address on the msgchain. */
+
+ nextaddr = addr->next;
+ addr->next = handled_addr;
+ handled_addr = topaddr;
+ }
+ fputc('\n', fp);
+ }
+
+ /* output machine readable part */
+#ifdef SUPPORT_I18N
+ if (message_smtputf8)
+ fprintf(fp, "--%s\n"
+ "Content-type: message/global-delivery-status\n\n"
+ "Reporting-MTA: dns; %s\n",
+ bound, smtp_active_hostname);
+ else
+#endif
+ fprintf(fp, "--%s\n"
+ "Content-type: message/delivery-status\n\n"
+ "Reporting-MTA: dns; %s\n",
+ bound, smtp_active_hostname);
+
+ if (dsn_envid)
+ {
+ /* must be decoded from xtext: see RFC 3461:6.3a */
+ uschar * xdec_envid;
+ if (xtextdecode(dsn_envid, &xdec_envid) > 0)
+ fprintf(fp, "Original-Envelope-ID: %s\n", dsn_envid);
+ else
+ fprintf(fp, "X-Original-Envelope-ID: error decoding xtext formatted ENVID\n");
+ }
+ fputc('\n', fp);
+
+ for (address_item * addr = handled_addr; addr; addr = addr->next)
+ {
+ host_item * hu;
+#ifdef EXPERIMENTAL_DSN_INFO
+ const uschar * s;
+#endif
+
+ print_dsn_addr_action(fp, addr, US"failed", US"5.0.0");
+
+ if ((hu = addr->host_used) && hu->name)
+ {
+ fprintf(fp, "Remote-MTA: dns; %s\n", hu->name);
+#ifdef EXPERIMENTAL_DSN_INFO
+ if (hu->address)
+ {
+ uschar * p = hu->port == 25
+ ? US"" : string_sprintf(":%d", hu->port);
+ fprintf(fp, "Remote-MTA: X-ip; [%s]%s\n", hu->address, p);
+ }
+ if ((s = addr->smtp_greeting) && *s)
+ dsn_put_wrapped(fp, US"X-Remote-MTA-smtp-greeting: X-str; ", s);
+ if ((s = addr->helo_response) && *s)
+ dsn_put_wrapped(fp, US"X-Remote-MTA-helo-response: X-str; ", s);
+ if (testflag(addr, af_pass_message) && (s = addr->message) && *s)
+ dsn_put_wrapped(fp, US"X-Exim-Diagnostic: X-str; ", s);
+#endif
+ print_dsn_diagnostic_code(addr, fp);
+ }
+#ifdef EXPERIMENTAL_DSN_INFO
+ else if (testflag(addr, af_pass_message) && (s = addr->message) && *s)
+ dsn_put_wrapped(fp, US"X-Exim-Diagnostic: X-str; ", s);
+#endif
+ fputc('\n', fp);
+ }
+
+ /* Now copy the message, trying to give an intelligible comment if
+ it is too long for it all to be copied. The limit isn't strictly
+ applied because of the buffering. There is, however, an option
+ to suppress copying altogether. */
+
+ emf_text = next_emf(emf, US"copy");
+
+ /* add message body
+ we ignore the intro text from template and add
+ the text for bounce_return_size_limit at the end.
+
+ bounce_return_message is ignored
+ in case RET= is defined we honor these values
+ otherwise bounce_return_body is honored.
+
+ bounce_return_size_limit is always honored.
+ */
+
+ fprintf(fp, "--%s\n", bound);
+
+ dsnlimitmsg = US"X-Exim-DSN-Information: Due to administrative limits only headers are returned";
+ dsnnotifyhdr = NULL;
+ topt = topt_add_return_path;
+
+ /* RET=HDRS? top priority */
+ if (dsn_ret == dsn_ret_hdrs)
+ topt |= topt_no_body;
+ else
+ {
+ struct stat statbuf;
+
+ /* no full body return at all? */
+ if (!bounce_return_body)
+ {
+ topt |= topt_no_body;
+ /* add header if we overrule RET=FULL */
+ if (dsn_ret == dsn_ret_full)
+ dsnnotifyhdr = dsnlimitmsg;
+ }
+ /* line length limited... return headers only if oversize */
+ /* size limited ... return headers only if limit reached */
+ else if ( max_received_linelength > bounce_return_linesize_limit
+ || ( bounce_return_size_limit > 0
+ && fstat(deliver_datafile, &statbuf) == 0
+ && statbuf.st_size > max
+ ) )
+ {
+ topt |= topt_no_body;
+ dsnnotifyhdr = dsnlimitmsg;
+ }
+ }
+
+#ifdef SUPPORT_I18N
+ if (message_smtputf8)
+ fputs(topt & topt_no_body ? "Content-type: message/global-headers\n\n"
+ : "Content-type: message/global\n\n",
+ fp);
+ else
+#endif
+ fputs(topt & topt_no_body ? "Content-type: text/rfc822-headers\n\n"
+ : "Content-type: message/rfc822\n\n",
+ fp);
+
+ fflush(fp);
+ transport_filter_argv = NULL; /* Just in case */
+ return_path = sender_address; /* In case not previously set */
+ { /* Dummy transport for headers add */
+ transport_ctx tctx = {{0}};
+ transport_instance tb = {0};
+
+ tctx.u.fd = fileno(fp);
+ tctx.tblock = &tb;
+ tctx.options = topt | topt_truncate_headers;
+ tb.add_headers = dsnnotifyhdr;
+
+ /*XXX no checking for failure! buggy! */
+ transport_write_message(&tctx, 0);
+ }
+ fflush(fp);
+
+ /* we never add the final text. close the file */
+ if (emf)
+ (void)fclose(emf);
+
+ fprintf(fp, "\n--%s--\n", bound);
+
+ /* Close the file, which should send an EOF to the child process
+ that is receiving the message. Wait for it to finish. */
+
+ (void)fclose(fp);
+ rc = child_close(pid, 0); /* Waits for child to close, no timeout */
+
+ /* If the process failed, there was some disaster in setting up the
+ error message. Unless the message is very old, ensure that addr_defer
+ is non-null, which will have the effect of leaving the message on the
+ spool. The failed addresses will get tried again next time. However, we
+ don't really want this to happen too often, so freeze the message unless
+ there are some genuine deferred addresses to try. To do this we have
+ to call spool_write_header() here, because with no genuine deferred
+ addresses the normal code below doesn't get run. */
+
+ if (rc != 0)
+ {
+ uschar * s = US"";
+ if (now - received_time.tv_sec < retry_maximum_timeout && !addr_defer)
+ {
+ addr_defer = (address_item *)(+1);
+ f.deliver_freeze = TRUE;
+ deliver_frozen_at = time(NULL);
+ /* Panic-dies on error */
+ (void)spool_write_header(message_id, SW_DELIVERING, NULL);
+ s = US" (frozen)";
+ }
+ deliver_msglog("Process failed (%d) when writing error message "
+ "to %s%s", rc, bounce_recipient, s);
+ log_write(0, LOG_MAIN, "Process failed (%d) when writing error message "
+ "to %s%s", rc, bounce_recipient, s);
+ }
+
+ /* The message succeeded. Ensure that the recipients that failed are
+ now marked finished with on the spool and their parents updated. */
+
+ else
+ {
+ for (address_item * addr = handled_addr; addr; addr = addr->next)
+ {
+ address_done(addr, logtod);
+ child_done(addr, logtod);
+ }
+ /* Panic-dies on error */
+ (void)spool_write_header(message_id, SW_DELIVERING, NULL);
+ }
+ }
+}
+
+/*************************************************
+* Send a warning message *
+*************************************************/
+/* Return: boolean success */
+
+static BOOL
+send_warning_message(const uschar * recipients, int queue_time, int show_time)
+{
+int fd;
+pid_t pid = child_open_exim(&fd, US"delay-warning-message");
+FILE * wmf = NULL, * f = fdopen(fd, "wb");
+uschar * wmf_text, * bound;
+transport_ctx tctx = {{0}};
+
+
+if (pid <= 0) return FALSE;
+
+GET_OPTION("warn_message_file");
+if (warn_message_file)
+ wmf = expand_open(warn_message_file,
+ US"warn_message_file", US"warning");
+
+warnmsg_recipients = recipients;
+warnmsg_delay = queue_time < 120*60
+ ? string_sprintf("%d minutes", show_time/60)
+ : string_sprintf("%d hours", show_time/3600);
+
+if (errors_reply_to)
+ fprintf(f, "Reply-To: %s\n", errors_reply_to);
+fprintf(f, "Auto-Submitted: auto-replied\n");
+moan_write_from(f);
+fprintf(f, "To: %s\n", recipients);
+moan_write_references(f, NULL);
+
+/* generated boundary string and output MIME-Headers */
+bound = string_sprintf(TIME_T_FMT "-eximdsn-%d", time(NULL), rand());
+
+fprintf(f, "Content-Type: multipart/report;"
+ " report-type=delivery-status; boundary=%s\n"
+ "MIME-Version: 1.0\n",
+ bound);
+
+if ((wmf_text = next_emf(wmf, US"header")))
+ fprintf(f, "%s\n", wmf_text);
+else
+ fprintf(f, "Subject: Warning: message %s delayed %s\n\n",
+ message_id, warnmsg_delay);
+
+/* output human readable part as text/plain section */
+fprintf(f, "--%s\n"
+ "Content-type: text/plain; charset=us-ascii\n\n",
+ bound);
+
+if ((wmf_text = next_emf(wmf, US"intro")))
+ fprintf(f, "%s", CS wmf_text);
+else
+ {
+ fprintf(f,
+"This message was created automatically by mail delivery software.\n");
+
+ if (Ustrcmp(recipients, sender_address) == 0)
+ fprintf(f,
+"A message that you sent has not yet been delivered to one or more of its\n"
+"recipients after more than ");
+
+ else
+ fprintf(f,
+"A message sent by\n\n <%s>\n\n"
+"has not yet been delivered to one or more of its recipients after more than \n",
+ sender_address);
+
+ fprintf(f, "%s on the queue on %s.\n\n"
+ "The message identifier is: %s\n",
+ warnmsg_delay, primary_hostname, message_id);
+
+ for (header_line * h = header_list; h; h = h->next)
+ if (strncmpic(h->text, US"Subject:", 8) == 0)
+ fprintf(f, "The subject of the message is: %s", h->text + 9);
+ else if (strncmpic(h->text, US"Date:", 5) == 0)
+ fprintf(f, "The date of the message is: %s", h->text + 6);
+ fputc('\n', f);
+
+ fprintf(f, "The address%s to which the message has not yet been "
+ "delivered %s:\n",
+ !addr_defer->next ? "" : "es",
+ !addr_defer->next ? "is": "are");
+ }
+
+/* List the addresses, with error information if allowed */
+
+fputc('\n', f);
+for (address_item * addr = addr_defer; addr; addr = addr->next)
+ {
+ if (print_address_information(addr, f, US" ", US"\n ", US""))
+ print_address_error(addr, f, US"Delay reason: ");
+ fputc('\n', f);
+ }
+fputc('\n', f);
+
+/* Final text */
+
+if (wmf)
+ {
+ if ((wmf_text = next_emf(wmf, US"final")))
+ fprintf(f, "%s", CS wmf_text);
+ (void)fclose(wmf);
+ }
+else
+ {
+ fprintf(f,
+"No action is required on your part. Delivery attempts will continue for\n"
+"some time, and this warning may be repeated at intervals if the message\n"
+"remains undelivered. Eventually the mail delivery software will give up,\n"
+"and when that happens, the message will be returned to you.\n");
+ }
+
+/* output machine readable part */
+fprintf(f, "\n--%s\n"
+ "Content-type: message/delivery-status\n\n"
+ "Reporting-MTA: dns; %s\n",
+ bound,
+ smtp_active_hostname);
+
+
+if (dsn_envid)
+ {
+ /* must be decoded from xtext: see RFC 3461:6.3a */
+ uschar *xdec_envid;
+ if (xtextdecode(dsn_envid, &xdec_envid) > 0)
+ fprintf(f,"Original-Envelope-ID: %s\n", dsn_envid);
+ else
+ fprintf(f,"X-Original-Envelope-ID: error decoding xtext formatted ENVID\n");
+ }
+fputc('\n', f);
+
+for (address_item * addr = addr_defer; addr; addr = addr->next)
+ {
+ host_item * hu;
+
+ print_dsn_addr_action(f, addr, US"delayed", US"4.0.0");
+
+ if ((hu = addr->host_used) && hu->name)
+ {
+ fprintf(f, "Remote-MTA: dns; %s\n", hu->name);
+ print_dsn_diagnostic_code(addr, f);
+ }
+ fputc('\n', f);
+ }
+
+fprintf(f, "--%s\n"
+ "Content-type: text/rfc822-headers\n\n",
+ bound);
+
+fflush(f);
+/* header only as required by RFC. only failure DSN needs to honor RET=FULL */
+tctx.u.fd = fileno(f);
+tctx.options = topt_add_return_path | topt_truncate_headers | topt_no_body;
+transport_filter_argv = NULL; /* Just in case */
+return_path = sender_address; /* In case not previously set */
+
+/* Write the original email out */
+/*XXX no checking for failure! buggy! */
+transport_write_message(&tctx, 0);
+fflush(f);
+
+fprintf(f,"\n--%s--\n", bound);
+
+fflush(f);
+
+/* Close and wait for child process to complete, without a timeout.
+If there's an error, don't update the count. */
+
+(void)fclose(f);
+return child_close(pid, 0) == 0;
+}
+
+/*************************************************
+* Send a success-DSN *
+*************************************************/
+
+static void
+maybe_send_dsn(const address_item * const addr_succeed)
+{
+address_item * addr_senddsn = NULL;
+
+for (const address_item * a = addr_succeed; a; a = a->next)
+ {
+ /* af_ignore_error not honored here. it's not an error */
+ DEBUG(D_deliver) debug_printf("DSN: processing router : %s\n"
+ "DSN: processing successful delivery address: %s\n"
+ "DSN: Sender_address: %s\n"
+ "DSN: orcpt: %s flags: 0x%x\n"
+ "DSN: envid: %s ret: %d\n"
+ "DSN: Final recipient: %s\n"
+ "DSN: Remote SMTP server supports DSN: %d\n",
+ a->router ? a->router->drinst.name : US"(unknown)",
+ a->address,
+ sender_address,
+ a->dsn_orcpt ? a->dsn_orcpt : US"NULL",
+ a->dsn_flags,
+ dsn_envid ? dsn_envid : US"NULL", dsn_ret,
+ a->address,
+ a->dsn_aware
+ );
+
+ /* send report if next hop not DSN aware or a router flagged "last DSN hop"
+ and a report was requested */
+
+ if ( (a->dsn_aware != dsn_support_yes || a->dsn_flags & rf_dsnlasthop)
+ && a->dsn_flags & rf_notify_success
+ )
+ {
+ /* copy and relink address_item and send report with all of them at once later */
+ address_item * addr_next = addr_senddsn;
+ addr_senddsn = store_get(sizeof(address_item), GET_UNTAINTED);
+ *addr_senddsn = *a;
+ addr_senddsn->next = addr_next;
+ }
+ else
+ DEBUG(D_deliver) debug_printf("DSN: not sending DSN success message\n");
+ }
+
+if (addr_senddsn)
+ { /* create exim process to send message */
+ int fd;
+ pid_t pid = child_open_exim(&fd, US"DSN");
+
+ DEBUG(D_deliver) debug_printf("DSN: child_open_exim returns: %ld\n", (long)pid);
+
+ if (pid < 0) /* Creation of child failed */
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Process %ld (parent %ld) failed to "
+ "create child process to send success-dsn message: %s",
+ (long)getpid(), (long)getppid(), strerror(errno));
+
+ DEBUG(D_deliver) debug_printf("DSN: child_open_exim failed\n");
+ }
+ else /* Creation of child succeeded */
+ {
+ FILE * f = fdopen(fd, "wb");
+ /* header only as required by RFC. only failure DSN needs to honor RET=FULL */
+ uschar * bound;
+ transport_ctx tctx = {{0}};
+
+ DEBUG(D_deliver)
+ debug_printf("sending success-dsn to: %s\n", sender_address);
+
+ /* build unique id for MIME boundary */
+ bound = string_sprintf(TIME_T_FMT "-eximdsn-%d", time(NULL), rand());
+ DEBUG(D_deliver) debug_printf("DSN: MIME boundary: %s\n", bound);
+
+ if (errors_reply_to)
+ fprintf(f, "Reply-To: %s\n", errors_reply_to);
+
+ moan_write_from(f);
+ fprintf(f, "Auto-Submitted: auto-generated\n"
+ "To: %s\n"
+ "Subject: Delivery Status Notification\n",
+ sender_address);
+ moan_write_references(f, NULL);
+ fprintf(f, "Content-Type: multipart/report;"
+ " report-type=delivery-status; boundary=%s\n"
+ "MIME-Version: 1.0\n\n"
+
+ "--%s\n"
+ "Content-type: text/plain; charset=us-ascii\n\n"
+
+ "This message was created automatically by mail delivery software.\n"
+ " ----- The following addresses had successful delivery notifications -----\n",
+ bound, bound);
+
+ for (address_item * a = addr_senddsn; a; a = a->next)
+ fprintf(f, "<%s> (relayed %s)\n\n",
+ a->address,
+ a->dsn_flags & rf_dsnlasthop ? "via non DSN router"
+ : a->dsn_aware == dsn_support_no ? "to non-DSN-aware mailer"
+ : "via non \"Remote SMTP\" router"
+ );
+
+ fprintf(f, "--%s\n"
+ "Content-type: message/delivery-status\n\n"
+ "Reporting-MTA: dns; %s\n",
+ bound, smtp_active_hostname);
+
+ if (dsn_envid)
+ { /* must be decoded from xtext: see RFC 3461:6.3a */
+ uschar * xdec_envid;
+ if (xtextdecode(dsn_envid, &xdec_envid) > 0)
+ fprintf(f, "Original-Envelope-ID: %s\n", dsn_envid);
+ else
+ fprintf(f, "X-Original-Envelope-ID: error decoding xtext formatted ENVID\n");
+ }
+ fputc('\n', f);
+
+ for (address_item * a = addr_senddsn; a; a = a->next)
+ {
+ host_item * hu;
+
+ print_dsn_addr_action(f, a, US"delivered", US"2.0.0");
+
+ if ((hu = a->host_used) && hu->name)
+ fprintf(f, "Remote-MTA: dns; %s\nDiagnostic-Code: smtp; 250 Ok\n\n",
+ hu->name);
+ else
+ fprintf(f, "Diagnostic-Code: X-Exim; relayed via non %s router\n\n",
+ a->dsn_flags & rf_dsnlasthop ? "DSN" : "SMTP");
+ }
+
+ fprintf(f, "--%s\nContent-type: text/rfc822-headers\n\n", bound);
+
+ fflush(f);
+ transport_filter_argv = NULL; /* Just in case */
+ return_path = sender_address; /* In case not previously set */
+
+ /* Write the original email out */
+
+ tctx.u.fd = fd;
+ tctx.options = topt_add_return_path | topt_truncate_headers | topt_no_body;
+ /*XXX hmm, FALSE(fail) retval ignored.
+ Could error for any number of reasons, and they are not handled. */
+ transport_write_message(&tctx, 0);
+ fflush(f);
+
+ fprintf(f,"\n--%s--\n", bound);
+
+ fflush(f);
+ fclose(f);
+ (void) child_close(pid, 0); /* Waits for child to close, no timeout */
+ }
+ }
+}
+
+/*************************************************
+* Deliver one message *
*************************************************/
/* This is the function which is called when a message is to be delivered. It
A delivery operation has a process all to itself; we never deliver more than
one message in the same process. Therefore we needn't worry too much about
store leakage.
+XXX No longer true with new continued-transport ops; cf. goto CONTINUED_ID
+
+Liable to be called as root.
Arguments:
id the id of the message to be delivered
*/
int
-deliver_message(uschar *id, BOOL forced, BOOL give_up)
+deliver_message(const uschar * id, BOOL forced, BOOL give_up)
{
-int i, rc;
-int final_yield = DELIVER_ATTEMPTED_NORMAL;
-time_t now = time(NULL);
-address_item *addr_last = NULL;
-uschar *filter_message = NULL;
-FILE *jread;
-int process_recipients = RECIP_ACCEPT;
-open_db dbblock;
-open_db *dbm_file;
+int i, rc, final_yield, process_recipients;
+time_t now;
+address_item * addr_last;
+uschar * filter_message, * info;
+open_db dbblock, * dbm_file = NULL;
extern int acl_where;
-uschar *info = (queue_run_pid == (pid_t)0)?
- string_sprintf("delivering %s", id) :
- string_sprintf("delivering %s (queue run pid %d)", id, queue_run_pid);
+CONTINUED_ID:
+final_yield = DELIVER_ATTEMPTED_NORMAL;
+now = time(NULL);
+addr_last = NULL;
+filter_message = NULL;
+process_recipients = RECIP_ACCEPT;
+
+#ifdef MEASURE_TIMING
+report_time_since(×tamp_startup, US"delivery start"); /* testcase 0022, 2100 */
+#endif
+
+info = queue_run_pid == (pid_t)0
+ ? string_sprintf("delivering %s", id)
+ : string_sprintf("delivering %s (queue run pid %ld)", id, (long)queue_run_pid);
/* If the D_process_info bit is on, set_process_info() will output debugging
information. If not, we want to show this initial information if D_deliver or
set_process_info("%s", info);
-if ((debug_selector & D_process_info) == 0 &&
- (debug_selector & (D_deliver|D_queue_run|D_v)) != 0)
+if ( !(debug_selector & D_process_info)
+ && (debug_selector & (D_deliver|D_queue_run|D_v))
+ )
debug_printf("%s\n", info);
/* Ensure that we catch any subprocesses that are created. Although Exim
it is obtained from a command line (the -M or -q options), and otherwise it is
known to be a valid message id. */
-Ustrcpy(message_id, id);
-deliver_force = forced;
+if (id != message_id)
+ Ustrcpy(message_id, id);
+f.deliver_force = forced;
return_count = 0;
message_size = 0;
while queue running - another process probably completed delivery. As part of
opening the data file, message_subdir gets set. */
-if (!spool_open_datafile(id))
+if ((deliver_datafile = spool_open_datafile(id)) < 0)
return continue_closedown(); /* yields DELIVER_NOT_ATTEMPTED */
/* The value of message_size at this point has been set to the data length,
assorted flags. It updates message_size. If there is a reading or format error,
give up; if the message has been around for sufficiently long, remove it. */
-sprintf(CS spoolname, "%s-H", id);
-if ((rc = spool_read_header(spoolname, TRUE, TRUE)) != spool_read_OK)
{
- if (errno == ERRNO_SPOOLFORMAT)
+ uschar * spoolname = string_sprintf("%s-H", id);
+ if ((rc = spool_read_header(spoolname, TRUE, TRUE)) != spool_read_OK)
{
- struct stat statbuf;
- sprintf(CS big_buffer, "%s/input/%s/%s", spool_directory, message_subdir,
- spoolname);
- if (Ustat(big_buffer, &statbuf) == 0)
- log_write(0, LOG_MAIN, "Format error in spool file %s: "
- "size=" OFF_T_FMT, spoolname, statbuf.st_size);
- else log_write(0, LOG_MAIN, "Format error in spool file %s", spoolname);
- }
- else
- log_write(0, LOG_MAIN, "Error reading spool file %s: %s", spoolname,
- strerror(errno));
+ if (errno == ERRNO_SPOOLFORMAT)
+ {
+ struct stat statbuf;
+ if (Ustat(spool_fname(US"input", message_subdir, spoolname, US""),
+ &statbuf) == 0)
+ log_write(0, LOG_MAIN, "Format error in spool file %s: "
+ "size=" OFF_T_FMT, spoolname, statbuf.st_size);
+ else
+ log_write(0, LOG_MAIN, "Format error in spool file %s", spoolname);
+ }
+ else
+ log_write(0, LOG_MAIN, "Error reading spool file %s: %s", spoolname,
+ strerror(errno));
- /* If we managed to read the envelope data, received_time contains the
- time the message was received. Otherwise, we can calculate it from the
- message id. */
+ /* If we managed to read the envelope data, received_time contains the
+ time the message was received. Otherwise, we can calculate it from the
+ message id. */
- if (rc != spool_read_hdrerror)
- {
- received_time = 0;
- for (i = 0; i < 6; i++)
- received_time = received_time * BASE_62 + tab62[id[i] - '0'];
- }
+ if (rc != spool_read_hdrerror)
+ {
+ received_time.tv_sec = received_time.tv_usec = 0;
+ /*III subsec precision?*/
+ for (i = 0; i < MESSAGE_ID_TIME_LEN; i++)
+ received_time.tv_sec = received_time.tv_sec * BASE_62 + tab62[id[i] - '0'];
+ }
- /* If we've had this malformed message too long, sling it. */
+ /* If we've had this malformed message too long, sling it. */
- if (now - received_time > keep_malformed)
- {
- sprintf(CS spoolname, "%s/msglog/%s/%s", spool_directory, message_subdir, id);
- Uunlink(spoolname);
- sprintf(CS spoolname, "%s/input/%s/%s-D", spool_directory, message_subdir, id);
- Uunlink(spoolname);
- sprintf(CS spoolname, "%s/input/%s/%s-H", spool_directory, message_subdir, id);
- Uunlink(spoolname);
- sprintf(CS spoolname, "%s/input/%s/%s-J", spool_directory, message_subdir, id);
- Uunlink(spoolname);
- log_write(0, LOG_MAIN, "Message removed because older than %s",
- readconf_printtime(keep_malformed));
- }
+ if (now - received_time.tv_sec > keep_malformed)
+ {
+ Uunlink(spool_fname(US"msglog", message_subdir, id, US""));
+ Uunlink(spool_fname(US"input", message_subdir, id, US"-D"));
+ Uunlink(spool_fname(US"input", message_subdir, id, US"-H"));
+ Uunlink(spool_fname(US"input", message_subdir, id, US"-J"));
+ log_write(0, LOG_MAIN, "Message removed because older than %s",
+ readconf_printtime(keep_malformed));
+ }
- (void)close(deliver_datafile);
- deliver_datafile = -1;
- return continue_closedown(); /* yields DELIVER_NOT_ATTEMPTED */
+ (void)close(deliver_datafile);
+ deliver_datafile = -1;
+ return continue_closedown(); /* yields DELIVER_NOT_ATTEMPTED */
+ }
}
/* The spool header file has been read. Look to see if there is an existing
run, and it will be deleted if this function gets to its end successfully.
Otherwise it might be needed again. */
-sprintf(CS spoolname, "%s/input/%s/%s-J", spool_directory, message_subdir, id);
-jread = Ufopen(spoolname, "rb");
-if (jread != NULL)
{
- while (Ufgets(big_buffer, big_buffer_size, jread) != NULL)
+ uschar * fname = spool_fname(US"input", message_subdir, id, US"-J");
+ FILE * jread;
+
+ if ( (journal_fd = Uopen(fname,
+ O_RDWR|O_APPEND | EXIM_CLOEXEC | EXIM_NOFOLLOW, SPOOL_MODE)) >= 0
+ && lseek(journal_fd, 0, SEEK_SET) == 0
+ && (jread = fdopen(journal_fd, "rb"))
+ )
{
- int n = Ustrlen(big_buffer);
- big_buffer[n-1] = 0;
- tree_add_nonrecipient(big_buffer);
- DEBUG(D_deliver) debug_printf("Previously delivered address %s taken from "
- "journal file\n", big_buffer);
+ while (Ufgets(big_buffer, big_buffer_size, jread))
+ {
+ int n = Ustrlen(big_buffer);
+ big_buffer[n-1] = 0;
+ tree_add_nonrecipient(big_buffer);
+ DEBUG(D_deliver) debug_printf("Previously delivered address %s taken from "
+ "journal file\n", big_buffer);
+ }
+ rewind(jread);
+ if ((journal_fd = dup(fileno(jread))) < 0)
+ journal_fd = fileno(jread);
+ else
+ (void) fclose(jread); /* Try to not leak the FILE resource */
+
+ /* Panic-dies on error */
+ (void)spool_write_header(message_id, SW_DELIVERING, NULL);
+ }
+ else if (errno != ENOENT)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "attempt to open journal for reading gave: "
+ "%s", strerror(errno));
+ return continue_closedown(); /* yields DELIVER_NOT_ATTEMPTED */
}
- (void)fclose(jread);
- /* Panic-dies on error */
- (void)spool_write_header(message_id, SW_DELIVERING, NULL);
- }
-else if (errno != ENOENT)
- {
- log_write(0, LOG_MAIN|LOG_PANIC, "attempt to open journal for reading gave: "
- "%s", strerror(errno));
- return continue_closedown(); /* yields DELIVER_NOT_ATTEMPTED */
- }
-/* A null recipients list indicates some kind of disaster. */
+ /* A null recipients list indicates some kind of disaster. */
-if (recipients_list == NULL)
- {
- (void)close(deliver_datafile);
- deliver_datafile = -1;
- log_write(0, LOG_MAIN, "Spool error: no recipients for %s", spoolname);
- return continue_closedown(); /* yields DELIVER_NOT_ATTEMPTED */
+ if (!recipients_list)
+ {
+ (void)close(deliver_datafile);
+ deliver_datafile = -1;
+ log_write(0, LOG_MAIN, "Spool error: no recipients for %s", fname);
+ return continue_closedown(); /* yields DELIVER_NOT_ATTEMPTED */
+ }
}
can happen, but in the default situation, unless forced, no delivery is
attempted. */
-if (deliver_freeze)
+if (f.deliver_freeze)
{
#ifdef SUPPORT_MOVE_FROZEN_MESSAGES
/* Moving to another directory removes the message from Exim's view. Other
tools must be used to deal with it. Logging of this action happens in
spool_move_message() and its subfunctions. */
- if (move_frozen_messages &&
- spool_move_message(id, message_subdir, US"", US"F"))
+ if ( move_frozen_messages
+ && spool_move_message(id, message_subdir, US"", US"F")
+ )
return continue_closedown(); /* yields DELIVER_NOT_ATTEMPTED */
#endif
ignore timer is exceeded. The message will be discarded if this delivery
fails. */
- else if (sender_address[0] == 0 && message_age >= ignore_bounce_errors_after)
- {
+ else if (!*sender_address && message_age >= ignore_bounce_errors_after)
log_write(0, LOG_MAIN, "Unfrozen by errmsg timer");
- }
/* If this is a bounce message, or there's no auto thaw, or we haven't
reached the auto thaw time yet, and this delivery is not forced by an admin
else
{
- if ((sender_address[0] == 0 ||
- auto_thaw <= 0 ||
- now <= deliver_frozen_at + auto_thaw
- )
- &&
- (!forced || !deliver_force_thaw || !admin_user ||
- continue_hostname != NULL
- ))
+ if ( ( sender_address[0] == 0
+ || auto_thaw <= 0
+ || now <= deliver_frozen_at + auto_thaw
+ )
+ && ( !forced || !f.deliver_force_thaw
+ || !f.admin_user || continue_hostname
+ ) )
{
(void)close(deliver_datafile);
deliver_datafile = -1;
if (forced)
{
- deliver_manual_thaw = TRUE;
+ f.deliver_manual_thaw = TRUE;
log_write(0, LOG_MAIN, "Unfrozen by forced delivery");
}
else log_write(0, LOG_MAIN, "Unfrozen by auto-thaw");
/* We get here if any of the rules for unfreezing have triggered. */
- deliver_freeze = FALSE;
+ f.deliver_freeze = FALSE;
update_spool = TRUE;
}
if (message_logs)
{
- uschar *error;
+ uschar * fname = spool_fname(US"msglog", message_subdir, id, US"");
+ uschar * error;
int fd;
- sprintf(CS spoolname, "%s/msglog/%s/%s", spool_directory, message_subdir, id);
- fd = open_msglog_file(spoolname, SPOOL_MODE, &error);
-
- if (fd < 0)
+ if ((fd = open_msglog_file(fname, SPOOL_MODE, &error)) < 0)
{
log_write(0, LOG_MAIN|LOG_PANIC, "Couldn't %s message log %s: %s", error,
- spoolname, strerror(errno));
+ fname, strerror(errno));
return continue_closedown(); /* yields DELIVER_NOT_ATTEMPTED */
}
- /* Make a C stream out of it. */
+ /* Make a stdio stream out of it. */
- message_log = fdopen(fd, "a");
- if (message_log == NULL)
+ if (!(message_log = fdopen(fd, "a")))
{
log_write(0, LOG_MAIN|LOG_PANIC, "Couldn't fdopen message log %s: %s",
- spoolname, strerror(errno));
+ fname, strerror(errno));
return continue_closedown(); /* yields DELIVER_NOT_ATTEMPTED */
}
}
if (give_up)
{
struct passwd *pw = getpwuid(real_uid);
- log_write(0, LOG_MAIN, "cancelled by %s", (pw != NULL)?
- US pw->pw_name : string_sprintf("uid %ld", (long int)real_uid));
+ log_write(0, LOG_MAIN, "cancelled by %s",
+ pw ? US pw->pw_name : string_sprintf("uid %ld", (long int)real_uid));
process_recipients = RECIP_FAIL;
}
ignore the true recipients of the message. Failure of the filter file is
logged, and the delivery attempt fails. */
-else if (system_filter != NULL && process_recipients != RECIP_FAIL_TIMEOUT)
+else if (system_filter && process_recipients != RECIP_FAIL_TIMEOUT)
{
int rc;
int filtertype;
ugid.uid_set = ugid.gid_set = TRUE;
}
else
- {
ugid.uid_set = ugid.gid_set = FALSE;
- }
return_path = sender_address;
- enable_dollar_recipients = TRUE; /* Permit $recipients in system filter */
- system_filtering = TRUE;
+ f.enable_dollar_recipients = TRUE; /* Permit $recipients in system filter */
+ f.system_filtering = TRUE;
/* Any error in the filter file causes a delivery to be abandoned. */
+ GET_OPTION("system_filter");
redirect.string = system_filter;
redirect.isfile = TRUE;
redirect.check_owner = redirect.check_group = FALSE;
RDO_REALLOG |
RDO_REWRITE,
NULL, /* No :include: restriction (not used in filter) */
- NULL, /* No sieve vacation directory (not sieve!) */
- NULL, /* No sieve enotify mailto owner (not sieve!) */
- NULL, /* No sieve user address (not sieve!) */
- NULL, /* No sieve subaddress (not sieve!) */
+ NULL, /* No sieve info (not sieve!) */
&ugid, /* uid/gid data */
&addr_new, /* Where to hang generated addresses */
&filter_message, /* Where to put error message */
/* Reset things. If the filter message is an empty string, which can happen
for a filter "fail" or "freeze" command with no text, reset it to NULL. */
- system_filtering = FALSE;
- enable_dollar_recipients = FALSE;
- if (filter_message != NULL && filter_message[0] == 0) filter_message = NULL;
+ f.system_filtering = FALSE;
+ f.enable_dollar_recipients = FALSE;
+ if (filter_message && filter_message[0] == 0) filter_message = NULL;
/* Save the values of the system filter variables so that user filters
can use them. */
unset "delivered", which is forced by the "freeze" command to make -bF
work properly. */
- else if (rc == FF_FREEZE && !deliver_manual_thaw)
+ else if (rc == FF_FREEZE && !f.deliver_manual_thaw)
{
- deliver_freeze = TRUE;
+ f.deliver_freeze = TRUE;
deliver_frozen_at = time(NULL);
process_recipients = RECIP_DEFER;
frozen_info = string_sprintf(" by the system filter%s%s",
- (filter_message == NULL)? US"" : US": ",
- (filter_message == NULL)? US"" : filter_message);
+ filter_message ? US": " : US"",
+ filter_message ? filter_message : US"");
}
/* The filter can request that a message be failed. The error message may be
process_recipients = RECIP_FAIL_FILTER;
- if (filter_message != NULL)
+ if (filter_message)
{
uschar *logend;
colon = US": ";
- if (filter_message[0] == '<' && filter_message[1] == '<' &&
- (logend = Ustrstr(filter_message, ">>")) != NULL)
+ if ( filter_message[0] == '<'
+ && filter_message[1] == '<'
+ && (logend = Ustrstr(filter_message, ">>"))
+ )
{
logmsg = filter_message + 2;
loglen = logend - logmsg;
else if (rc == FF_DELIVERED)
{
process_recipients = RECIP_IGNORE;
- if (addr_new == NULL)
- log_write(0, LOG_MAIN, "=> discarded (system filter)");
- else
+ if (addr_new)
log_write(0, LOG_MAIN, "original recipients ignored (system filter)");
+ else
+ log_write(0, LOG_MAIN, "=> discarded (system filter)");
}
/* If any new addresses were created by the filter, fake up a "parent"
pipes, files, and autoreplies, and run them as the filter uid if set,
otherwise as the current uid. */
- if (addr_new != NULL)
+ if (addr_new)
{
- int uid = (system_filter_uid_set)? system_filter_uid : geteuid();
- int gid = (system_filter_gid_set)? system_filter_gid : getegid();
+ int uid = system_filter_uid_set ? system_filter_uid : geteuid();
+ int gid = system_filter_gid_set ? system_filter_gid : getegid();
/* The text "system-filter" is tested in transport_set_up_command() and in
set_up_shell_command() in the pipe transport, to enable them to permit
at the final address. This is used if we go on to add addresses for the
original recipients. */
- while (p != NULL)
+ while (p)
{
- if (parent->child_count == SHRT_MAX)
+ if (parent->child_count == USHRT_MAX)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "system filter generated more "
- "than %d delivery addresses", SHRT_MAX);
+ "than %d delivery addresses", USHRT_MAX);
parent->child_count++;
p->parent = parent;
uschar *type;
p->uid = uid;
p->gid = gid;
- setflag(p, af_uid_set |
- af_gid_set |
- af_allow_file |
- af_allow_pipe |
- af_allow_reply);
+ setflag(p, af_uid_set);
+ setflag(p, af_gid_set);
+ setflag(p, af_allow_file);
+ setflag(p, af_allow_pipe);
+ setflag(p, af_allow_reply);
/* Find the name of the system filter's appropriate pfr transport */
if (p->address[0] == '|')
{
type = US"pipe";
+ GET_OPTION("system_filter_pipe_transport");
tpname = system_filter_pipe_transport;
address_pipe = p->address;
}
else if (p->address[0] == '>')
{
type = US"reply";
+ GET_OPTION("system_filter_reply_transport");
tpname = system_filter_reply_transport;
}
else
if (p->address[Ustrlen(p->address)-1] == '/')
{
type = US"directory";
+ GET_OPTION("system_filter_directory_transport");
tpname = system_filter_directory_transport;
}
else
{
type = US"file";
+ GET_OPTION("system_filter_file_transport");
tpname = system_filter_file_transport;
}
address_file = p->address;
/* Now find the actual transport, first expanding the name. We have
set address_file or address_pipe above. */
- if (tpname != NULL)
+ if (tpname)
{
uschar *tmp = expand_string(tpname);
address_file = address_pipe = NULL;
- if (tmp == NULL)
+ if (!tmp)
p->message = string_sprintf("failed to expand \"%s\" as a "
"system filter transport name", tpname);
+ if (is_tainted(tmp))
+ p->message = string_sprintf("attempt to used tainted value '%s' for"
+ "transport '%s' as a system filter", tmp, tpname);
tpname = tmp;
}
else
- {
p->message = string_sprintf("system_filter_%s_transport is unset",
type);
- }
- if (tpname != NULL)
+ if (tpname)
{
transport_instance *tp;
- for (tp = transports; tp != NULL; tp = tp->next)
- {
- if (Ustrcmp(tp->name, tpname) == 0)
- {
- p->transport = tp;
- break;
- }
- }
- if (tp == NULL)
+ for (tp = transports; tp; tp = tp->drinst.next)
+ if (Ustrcmp(tp->drinst.name, tpname) == 0)
+ { p->transport = tp; break; }
+ if (!tp)
p->message = string_sprintf("failed to find \"%s\" transport "
"for system filter delivery", tpname);
}
/* If we couldn't set up a transport, defer the delivery, putting the
error on the panic log as well as the main log. */
- if (p->transport == NULL)
+ if (!p->transport)
{
- address_item *badp = p;
+ address_item * badp = p;
p = p->next;
- if (addr_last == NULL) addr_new = p; else addr_last->next = p;
+ if (!addr_last) addr_new = p; else addr_last->next = p;
badp->local_part = badp->address; /* Needed for log line */
- post_process_one(badp, DEFER, LOG_MAIN|LOG_PANIC, DTYPE_ROUTER, 0);
+ post_process_one(badp, DEFER, LOG_MAIN|LOG_PANIC, EXIM_DTYPE_ROUTER, 0);
continue;
}
} /* End of pfr handling */
value is non-negative, we must set the onetime parent from it. This which
points to the relevant entry in the recipients list.
+When running for an ATRN delivery only include addresses for the domains
+to be delivered.
+
This processing can be altered by the setting of the process_recipients
variable, which is changed if recipients are to be ignored, failed, or
deferred. This can happen as a result of system filter activity, or if the -Mg
complications for local addresses. */
if (process_recipients != RECIP_IGNORE)
- {
for (i = 0; i < recipients_count; i++)
{
- if (tree_search(tree_nonrecipients, recipients_list[i].address) == NULL)
+ recipient_item * r = recipients_list + i;
+ uschar * s;
+
+ if ( !tree_search(tree_nonrecipients, r->address)
+ && ( !atrn_domains
+ || (s = Ustrrchr(r->address, '@'))
+ && match_isinlist(s+1, &atrn_domains, 0, &domainlist_anchor, NULL,
+ MCL_DOMAIN + MCL_NOEXPAND, TRUE, NULL) == OK
+ ) )
{
- recipient_item *r = recipients_list + i;
- address_item *new = deliver_make_addr(r->address, FALSE);
- new->p.errors_address = r->errors_to;
+ address_item * new = deliver_make_addr(r->address, FALSE);
+
+ new->prop.errors_address = r->errors_to;
+#ifdef SUPPORT_I18N
+ if ((new->prop.utf8_msg = message_smtputf8))
+ {
+ new->prop.utf8_downcvt = message_utf8_downconvert == 1;
+ new->prop.utf8_downcvt_maybe = message_utf8_downconvert == -1;
+ DEBUG(D_deliver) debug_printf("utf8, downconvert %s\n",
+ new->prop.utf8_downcvt ? "yes"
+ : new->prop.utf8_downcvt_maybe ? "ifneeded"
+ : "no");
+ }
+#endif
if (r->pno >= 0)
new->onetime_parent = recipients_list[r->pno].address;
- /* If DSN support is enabled, set the dsn flags and the original receipt
- to be passed on to other DSN enabled MTAs */
+ /* If DSN support is enabled, set the dsn flags and the original receipt
+ to be passed on to other DSN enabled MTAs */
+
new->dsn_flags = r->dsn_flags & rf_dsnflags;
new->dsn_orcpt = r->orcpt;
- DEBUG(D_deliver) debug_printf("DSN: set orcpt: %s flags: %d\n", new->dsn_orcpt, new->dsn_flags);
+ DEBUG(D_deliver) debug_printf("DSN: set orcpt: %s flags: 0x%x\n",
+ new->dsn_orcpt ? new->dsn_orcpt : US"", new->dsn_flags);
switch (process_recipients)
{
/* RECIP_DEFER is set when a system filter freezes a message. */
case RECIP_DEFER:
- new->next = addr_defer;
- addr_defer = new;
- break;
+ new->next = addr_defer;
+ addr_defer = new;
+ break;
/* RECIP_FAIL_FILTER is set when a system filter has obeyed a "fail"
command. */
case RECIP_FAIL_FILTER:
- new->message =
- (filter_message == NULL)? US"delivery cancelled" : filter_message;
- setflag(new, af_pass_message);
- goto RECIP_QUEUE_FAILED; /* below */
+ new->message =
+ filter_message ? filter_message : US"delivery cancelled";
+ setflag(new, af_pass_message);
+ goto RECIP_QUEUE_FAILED; /* below */
/* RECIP_FAIL_TIMEOUT is set when a message is frozen, but is older
been logged. */
case RECIP_FAIL_TIMEOUT:
- new->message = US"delivery cancelled; message timed out";
- goto RECIP_QUEUE_FAILED; /* below */
+ new->message = US"delivery cancelled; message timed out";
+ goto RECIP_QUEUE_FAILED; /* below */
/* RECIP_FAIL is set when -Mg has been used. */
case RECIP_FAIL:
- new->message = US"delivery cancelled by administrator";
- /* Fall through */
+ new->message = US"delivery cancelled by administrator";
+ /* not setting af_pass_message here means that will not
+ appear in the bounce message */
+ /* Fall through */
/* Common code for the failure cases above. If this is not a bounce
message, put the address on the failed list so that it is used to
The incident has already been logged. */
RECIP_QUEUE_FAILED:
- if (sender_address[0] != 0)
- {
- new->next = addr_failed;
- addr_failed = new;
- }
+ if (*sender_address)
+ {
+ new->next = addr_failed;
+ addr_failed = new;
+ }
break;
is a bounce message, it will get frozen. */
case RECIP_FAIL_LOOP:
- new->message = US"Too many \"Received\" headers - suspected mail loop";
- post_process_one(new, FAIL, LOG_MAIN, DTYPE_ROUTER, 0);
- break;
+ new->message = US"Too many \"Received\" headers - suspected mail loop";
+ post_process_one(new, FAIL, LOG_MAIN, EXIM_DTYPE_ROUTER, 0);
+ break;
/* Value should be RECIP_ACCEPT; take this as the safe default. */
default:
- if (addr_new == NULL) addr_new = new; else addr_last->next = new;
- addr_last = new;
- break;
+ if (!addr_new) addr_new = new; else addr_last->next = new;
+ addr_last = new;
+ break;
}
-#ifdef EXPERIMENTAL_EVENT
- if (process_recipients != RECIP_ACCEPT)
+#ifndef DISABLE_EVENT
+ if (process_recipients != RECIP_ACCEPT && event_action)
{
- uschar * save_local = deliver_localpart;
- uschar * save_domain = deliver_domain;
-
- deliver_localpart = expand_string(
- string_sprintf("${local_part:%s}", new->address));
- deliver_domain = expand_string(
- string_sprintf("${domain:%s}", new->address));
+ const uschar * save_local = deliver_localpart;
+ const uschar * save_domain = deliver_domain;
+ const uschar * addr = new->address;
+ uschar * errmsg = NULL;
+ int start, end, dom;
+
+ if (!parse_extract_address(addr, &errmsg, &start, &end, &dom, TRUE))
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "failed to parse address '%.100s': %s\n", addr, errmsg);
+ else
+ {
+ deliver_localpart =
+ string_copyn(addr+start, dom ? (dom-1) - start : end - start);
+ deliver_domain = dom ? CUS string_copyn(addr+dom, end - dom) : CUS"";
- (void) event_raise(event_action,
- US"msg:fail:internal", new->message);
+ (void) event_raise(event_action, US"msg:fail:internal", new->message, NULL);
- deliver_localpart = save_local;
- deliver_domain = save_domain;
+ deliver_localpart = save_local;
+ deliver_domain = save_domain;
+ }
}
#endif
}
}
- }
DEBUG(D_deliver)
{
- address_item *p = addr_new;
debug_printf("Delivery address list:\n");
- while (p != NULL)
- {
- debug_printf(" %s %s\n", p->address, (p->onetime_parent == NULL)? US"" :
- p->onetime_parent);
- p = p->next;
- }
+ for (address_item * p = addr_new; p; p = p->next)
+ debug_printf(" %s %s\n", p->address,
+ p->onetime_parent ? p->onetime_parent : US"");
}
/* Set up the buffers used for copying over the file when delivering. */
. If new addresses have been generated by the routers, da capo.
*/
-header_rewritten = FALSE; /* No headers rewritten yet */
-while (addr_new != NULL) /* Loop until all addresses dealt with */
+f.header_rewritten = FALSE; /* No headers rewritten yet */
+while (addr_new) /* Loop until all addresses dealt with */
{
- address_item *addr, *parent;
- dbm_file = dbfn_open(US"retry", O_RDONLY, &dbblock, FALSE);
+ address_item * addr, * parent;
/* Failure to open the retry database is treated the same as if it does
- not exist. In both cases, dbm_file is NULL. */
+ not exist. In both cases, dbm_file is NULL. For the first stage of a 2-phase
+ queue run don't bother checking domain- or address-retry info; they will take
+ effect on the second stage. */
+
+ if (!f.queue_2stage)
+ {
+ /* If we have transaction-capable hintsdbs, open the retry db without
+ locking, and leave open for the transport process and for subsequent
+ deliveries. Use a writeable open as we can keep it open all the way through
+ to writing retry records if needed due to message fails.
+ If the open fails, tag that explicitly for the transport but retry the open
+ next time around, in case it was created in the interim.
+ If non-transaction, we are only reading records at this stage and
+ we close the db before running the transport.
+ Either way we do a non-creating open. */
+
+ if (continue_retry_db == (open_db *)-1)
+ continue_retry_db = NULL;
+
+ if (continue_retry_db)
+ {
+ DEBUG(D_hints_lookup) debug_printf("using cached retry hintsdb handle\n");
+ dbm_file = continue_retry_db;
+ }
+ else if (!exim_lockfile_needed())
+ {
+ dbm_file = dbfn_open_multi(US"retry", O_RDWR, &dbblock);
+ continue_retry_db = dbm_file ? dbm_file : (open_db *)-1;
+ }
+ else
+ dbm_file = dbfn_open(US"retry", O_RDONLY, &dbblock, FALSE, TRUE);
- if (dbm_file == NULL)
- {
- DEBUG(D_deliver|D_retry|D_route|D_hints_lookup)
- debug_printf("no retry data available\n");
+ if (!dbm_file)
+ DEBUG(D_deliver|D_retry|D_route|D_hints_lookup)
+ debug_printf("no retry data available\n");
}
/* Scan the current batch of new addresses, to handle pipes, files and
autoreplies, and determine which others are ready for routing. */
- while (addr_new != NULL)
+ while (addr_new)
{
int rc;
- uschar *p;
- tree_node *tnode;
- dbdata_retry *domain_retry_record;
- dbdata_retry *address_retry_record;
+ tree_node * tnode;
+ dbdata_retry * domain_retry_record = NULL, * address_retry_record = NULL;
addr = addr_new;
addr_new = addr->next;
addr->local_part = addr->address;
addr->message =
US"filter autoreply generated syntactically invalid recipient";
- setflag(addr, af_ignore_error);
- (void)post_process_one(addr, FAIL, LOG_MAIN, DTYPE_ROUTER, 0);
+ addr->prop.ignore_error = TRUE;
+ (void) post_process_one(addr, FAIL, LOG_MAIN, EXIM_DTYPE_ROUTER, 0);
continue; /* with the next new address */
}
addr->unique =
string_sprintf("%s:%s", addr->address, addr->parent->unique +
- (testflag(addr->parent, af_homonym)? 3:0));
+ (testflag(addr->parent, af_homonym) ? 3:0));
addr->address_retry_key = addr->domain_retry_key =
string_sprintf("T:%s", addr->unique);
keep piling '>' characters on the front. */
if (addr->address[0] == '>')
- {
- while (tree_search(tree_duplicates, addr->unique) != NULL)
+ while (tree_search(tree_duplicates, addr->unique))
addr->unique = string_sprintf(">%s", addr->unique);
- }
- else if ((tnode = tree_search(tree_duplicates, addr->unique)) != NULL)
+ else if ((tnode = tree_search(tree_duplicates, addr->unique)))
{
DEBUG(D_deliver|D_route)
debug_printf("%s is a duplicate address: discarded\n", addr->address);
/* Check for previous delivery */
- if (tree_search(tree_nonrecipients, addr->unique) != NULL)
+ if (tree_search(tree_nonrecipients, addr->unique))
{
DEBUG(D_deliver|D_route)
debug_printf("%s was previously delivered: discarded\n", addr->address);
{
addr->basic_errno = ERRNO_FORBIDFILE;
addr->message = US"delivery to file forbidden";
- (void)post_process_one(addr, FAIL, LOG_MAIN, DTYPE_ROUTER, 0);
+ (void)post_process_one(addr, FAIL, LOG_MAIN, EXIM_DTYPE_ROUTER, 0);
continue; /* with the next new address */
}
}
{
addr->basic_errno = ERRNO_FORBIDPIPE;
addr->message = US"delivery to pipe forbidden";
- (void)post_process_one(addr, FAIL, LOG_MAIN, DTYPE_ROUTER, 0);
+ (void)post_process_one(addr, FAIL, LOG_MAIN, EXIM_DTYPE_ROUTER, 0);
continue; /* with the next new address */
}
}
{
addr->basic_errno = ERRNO_FORBIDREPLY;
addr->message = US"autoreply forbidden";
- (void)post_process_one(addr, FAIL, LOG_MAIN, DTYPE_ROUTER, 0);
+ (void)post_process_one(addr, FAIL, LOG_MAIN, EXIM_DTYPE_ROUTER, 0);
continue; /* with the next new address */
}
if (addr->basic_errno == ERRNO_BADTRANSPORT)
{
- (void)post_process_one(addr, DEFER, LOG_MAIN, DTYPE_ROUTER, 0);
+ (void)post_process_one(addr, DEFER, LOG_MAIN, EXIM_DTYPE_ROUTER, 0);
continue;
}
/* Treat /dev/null as a special case and abandon the delivery. This
avoids having to specify a uid on the transport just for this case.
- Arrange for the transport name to be logged as "**bypassed**". */
+ Arrange for the transport name to be logged as "**bypassed**".
+ Copy the transport for this fairly unusual case rather than having
+ to make all transports mutable. */
if (Ustrcmp(addr->address, "/dev/null") == 0)
{
- uschar *save = addr->transport->name;
- addr->transport->name = US"**bypassed**";
- (void)post_process_one(addr, OK, LOG_MAIN, DTYPE_TRANSPORT, '=');
- addr->transport->name = save;
+ transport_instance * save_t = addr->transport;
+ transport_instance * t = store_get(sizeof(*t), save_t);
+ *t = *save_t;
+ t->drinst.name = US"**bypassed**";
+ addr->transport = t;
+ (void)post_process_one(addr, OK, LOG_MAIN, EXIM_DTYPE_TRANSPORT, '=');
+ addr->transport= save_t;
continue; /* with the next new address */
}
delivery. */
DEBUG(D_deliver|D_route)
- debug_printf("queued for %s transport\n", addr->transport->name);
+ debug_printf("queued for %s transport\n", addr->transport->drinst.name);
addr->next = addr_local;
addr_local = addr;
continue; /* with the next new address */
{
addr->message = US"cannot check percent_hack_domains";
addr->basic_errno = ERRNO_LISTDEFER;
- (void)post_process_one(addr, DEFER, LOG_MAIN, DTYPE_NONE, 0);
+ (void)post_process_one(addr, DEFER, LOG_MAIN, EXIM_DTYPE_NONE, 0);
continue;
}
delivery was forced by hand. */
deliver_domain = addr->domain; /* set $domain */
- if (!forced && hold_domains != NULL &&
- (rc = match_isinlist(addr->domain, &hold_domains, 0,
+ if ( !forced && hold_domains
+ && (rc = match_isinlist(addr->domain, (const uschar **)&hold_domains, 0,
&domainlist_anchor, addr->domain_cache, MCL_DOMAIN, TRUE,
- NULL)) != FAIL)
+ NULL)) != FAIL
+ )
{
if (rc == DEFER)
{
addr->message = US"domain is held";
addr->basic_errno = ERRNO_HELD;
}
- (void)post_process_one(addr, DEFER, LOG_MAIN, DTYPE_NONE, 0);
+ (void)post_process_one(addr, DEFER, LOG_MAIN, EXIM_DTYPE_NONE, 0);
continue;
}
The "unique" field is initialized to the same value as the "address" field,
but gets changed here to cope with identically-named descendents. */
- for (parent = addr->parent; parent != NULL; parent = parent->parent)
+ for (parent = addr->parent; parent; parent = parent->parent)
if (strcmpic(addr->address, parent->address) == 0) break;
/* If there's an ancestor with the same name, set the homonym flag. This
work. This means that siblings or cousins with the same names are treated
as duplicates, which is what we want. */
- if (parent != NULL)
+ if (parent)
{
setflag(addr, af_homonym);
if (parent->unique[0] != '\\')
/* Ensure that the domain in the unique field is lower cased, because
domains are always handled caselessly. */
- p = Ustrrchr(addr->unique, '@');
- while (*p != 0) { *p = tolower(*p); p++; }
+ for (uschar * p = Ustrrchr(addr->unique, '@'); *p; p++) *p = tolower(*p);
DEBUG(D_deliver|D_route) debug_printf("unique = %s\n", addr->unique);
- if (tree_search(tree_nonrecipients, addr->unique) != NULL)
+ if (tree_search(tree_nonrecipients, addr->unique))
{
DEBUG(D_deliver|D_route)
debug_printf("%s was previously delivered: discarded\n", addr->unique);
continue;
}
- /* Get the routing retry status, saving the two retry keys (with and
- without the local part) for subsequent use. If there is no retry record for
- the standard address routing retry key, we look for the same key with the
- sender attached, because this form is used by the smtp transport after a
- 4xx response to RCPT when address_retry_include_sender is true. */
-
- addr->domain_retry_key = string_sprintf("R:%s", addr->domain);
- addr->address_retry_key = string_sprintf("R:%s@%s", addr->local_part,
- addr->domain);
-
- if (dbm_file == NULL)
- domain_retry_record = address_retry_record = NULL;
+ if (f.queue_2stage)
+ {
+ DEBUG(D_deliver)
+ debug_printf_indent("no router retry check (ph1 qrun)\n");
+ }
else
{
- domain_retry_record = dbfn_read(dbm_file, addr->domain_retry_key);
- if (domain_retry_record != NULL &&
- now - domain_retry_record->time_stamp > retry_data_expire)
- domain_retry_record = NULL; /* Ignore if too old */
+ /* Get the routing retry status, saving the two retry keys (with and
+ without the local part) for subsequent use. If there is no retry record
+ for the standard address routing retry key, we look for the same key with
+ the sender attached, because this form is used by the smtp transport after
+ a 4xx response to RCPT when address_retry_include_sender is true. */
- address_retry_record = dbfn_read(dbm_file, addr->address_retry_key);
- if (address_retry_record != NULL &&
- now - address_retry_record->time_stamp > retry_data_expire)
- address_retry_record = NULL; /* Ignore if too old */
+ DEBUG(D_deliver|D_retry)
+ {
+ debug_printf_indent("checking router retry status\n");
+ acl_level++;
+ }
+ addr->domain_retry_key = string_sprintf("R:%s", addr->domain);
+ addr->address_retry_key = string_sprintf("R:%s@%s", addr->local_part,
+ addr->domain);
- if (address_retry_record == NULL)
- {
- uschar *altkey = string_sprintf("%s:<%s>", addr->address_retry_key,
- sender_address);
- address_retry_record = dbfn_read(dbm_file, altkey);
- if (address_retry_record != NULL &&
- now - address_retry_record->time_stamp > retry_data_expire)
- address_retry_record = NULL; /* Ignore if too old */
- }
- }
+ if (dbm_file)
+ {
+ domain_retry_record = dbfn_read(dbm_file, addr->domain_retry_key);
+ if ( domain_retry_record
+ && now - domain_retry_record->time_stamp > retry_data_expire
+ )
+ {
+ DEBUG(D_deliver|D_retry)
+ debug_printf_indent("domain retry record present but expired\n");
+ domain_retry_record = NULL; /* Ignore if too old */
+ }
+
+ address_retry_record = dbfn_read(dbm_file, addr->address_retry_key);
+ if ( address_retry_record
+ && now - address_retry_record->time_stamp > retry_data_expire
+ )
+ {
+ DEBUG(D_deliver|D_retry)
+ debug_printf_indent("address retry record present but expired\n");
+ address_retry_record = NULL; /* Ignore if too old */
+ }
- DEBUG(D_deliver|D_retry)
- {
- if (domain_retry_record == NULL)
- debug_printf("no domain retry record\n");
- if (address_retry_record == NULL)
- debug_printf("no address retry record\n");
+ if (!address_retry_record)
+ {
+ uschar *altkey = string_sprintf("%s:<%s>", addr->address_retry_key,
+ sender_address);
+ address_retry_record = dbfn_read(dbm_file, altkey);
+ if ( address_retry_record
+ && now - address_retry_record->time_stamp > retry_data_expire)
+ {
+ DEBUG(D_deliver|D_retry)
+ debug_printf_indent("address<sender> retry record present but expired\n");
+ address_retry_record = NULL; /* Ignore if too old */
+ }
+ }
+ }
+
+ DEBUG(D_deliver|D_retry)
+ {
+ if (!domain_retry_record)
+ debug_printf_indent("no domain retry record\n");
+ else
+ debug_printf_indent("have domain retry record; next_try = now%+d\n",
+ f.running_in_test_harness ? 0 :
+ (int)(domain_retry_record->next_try - now));
+
+ if (!address_retry_record)
+ debug_printf_indent("no address retry record\n");
+ else
+ debug_printf_indent("have address retry record; next_try = now%+d\n",
+ f.running_in_test_harness ? 0 :
+ (int)(address_retry_record->next_try - now));
+ acl_level--;
+ }
}
/* If we are sending a message down an existing SMTP connection, we must
The reason for not doing the same for address retries is that they normally
arise from 4xx responses, not DNS timeouts. */
- if (continue_hostname != NULL && domain_retry_record != NULL)
+ if (continue_hostname && domain_retry_record)
{
addr->message = US"reusing SMTP connection skips previous routing defer";
addr->basic_errno = ERRNO_RRETRY;
- (void)post_process_one(addr, DEFER, LOG_MAIN, DTYPE_ROUTER, 0);
+ (void)post_process_one(addr, DEFER, LOG_MAIN, EXIM_DTYPE_ROUTER, 0);
+
+ addr->message = domain_retry_record->text;
+ setflag(addr, af_pass_message);
}
/* If we are in a queue run, defer routing unless there is no retry data or
which keep the retry record fresh, which can lead to us perpetually
deferring messages. */
- else if (((queue_running && !deliver_force) || continue_hostname != NULL)
- &&
- ((domain_retry_record != NULL &&
- now < domain_retry_record->next_try &&
- !domain_retry_record->expired)
- ||
- (address_retry_record != NULL &&
- now < address_retry_record->next_try))
- &&
- (domain_retry_record != NULL ||
- address_retry_record == NULL ||
- !retry_ultimate_address_timeout(addr->address_retry_key,
- addr->domain, address_retry_record, now)))
+ else if ( ( f.queue_running && !f.deliver_force
+ || continue_hostname
+ )
+ && ( ( domain_retry_record
+ && now < domain_retry_record->next_try
+ && !domain_retry_record->expired
+ )
+ || ( address_retry_record
+ && now < address_retry_record->next_try
+ ) )
+ && ( domain_retry_record
+ || !address_retry_record
+ || !retry_ultimate_address_timeout(addr->address_retry_key,
+ addr->domain, address_retry_record, now)
+ ) )
{
addr->message = US"retry time not reached";
addr->basic_errno = ERRNO_RRETRY;
- (void)post_process_one(addr, DEFER, LOG_MAIN, DTYPE_ROUTER, 0);
+ (void)post_process_one(addr, DEFER, LOG_MAIN, EXIM_DTYPE_ROUTER, 0);
+
+ /* For remote-retry errors (here and just above) that we've not yet
+ hit the retry time, use the error recorded in the retry database
+ as info in the warning message. This lets us send a message even
+ when we're not failing on a fresh attempt. We assume that this
+ info is not sensitive. */
+
+ addr->message = domain_retry_record
+ ? domain_retry_record->text : address_retry_record->text;
+ setflag(addr, af_pass_message);
}
/* The domain is OK for routing. Remember if retry data exists so it
else
{
- if (domain_retry_record != NULL || address_retry_record != NULL)
+ if (domain_retry_record || address_retry_record)
setflag(addr, af_dr_retry_exists);
addr->next = addr_route;
addr_route = addr;
}
}
- /* The database is closed while routing is actually happening. Requests to
- update it are put on a chain and all processed together at the end. */
+ /* If not transaction-capable, the database is closed while routing is
+ actually happening. Requests to update it are put on a chain and all processed
+ together at the end. */
- if (dbm_file != NULL) dbfn_close(dbm_file);
+ if (dbm_file)
+ if (exim_lockfile_needed())
+ { dbfn_close(dbm_file); continue_retry_db = dbm_file = NULL; }
+ else
+ DEBUG(D_hints_lookup) debug_printf("retaining retry hintsdb handle\n");
/* If queue_domains is set, we don't even want to try routing addresses in
those domains. During queue runs, queue_domains is forced to be unset.
Optimize by skipping this pass through the addresses if nothing is set. */
- if (!deliver_force && queue_domains != NULL)
+ if (!f.deliver_force && queue_domains)
{
address_item *okaddr = NULL;
- while (addr_route != NULL)
+ while (addr_route)
{
address_item *addr = addr_route;
addr_route = addr->next;
deliver_domain = addr->domain; /* set $domain */
- if ((rc = match_isinlist(addr->domain, &queue_domains, 0,
+ if ((rc = match_isinlist(addr->domain, CUSS &queue_domains, 0,
&domainlist_anchor, addr->domain_cache, MCL_DOMAIN, TRUE, NULL))
!= OK)
- {
if (rc == DEFER)
{
addr->basic_errno = ERRNO_LISTDEFER;
addr->message = US"queue_domains lookup deferred";
- (void)post_process_one(addr, DEFER, LOG_MAIN, DTYPE_ROUTER, 0);
+ (void)post_process_one(addr, DEFER, LOG_MAIN, EXIM_DTYPE_ROUTER, 0);
}
else
{
addr->next = okaddr;
okaddr = addr;
}
- }
else
{
addr->basic_errno = ERRNO_QUEUE_DOMAIN;
addr->message = US"domain is in queue_domains";
- (void)post_process_one(addr, DEFER, LOG_MAIN, DTYPE_ROUTER, 0);
+ (void)post_process_one(addr, DEFER, LOG_MAIN, EXIM_DTYPE_ROUTER, 0);
}
}
/* Now route those addresses that are not deferred. */
- while (addr_route != NULL)
+ while (addr_route)
{
int rc;
address_item *addr = addr_route;
- uschar *old_domain = addr->domain;
+ const uschar *old_domain = addr->domain;
uschar *old_unique = addr->unique;
addr_route = addr->next;
addr->next = NULL;
/* Just in case some router parameter refers to it. */
- return_path = (addr->p.errors_address != NULL)?
- addr->p.errors_address : sender_address;
+ if (!(return_path = addr->prop.errors_address))
+ return_path = sender_address;
/* If a router defers an address, add a retry item. Whether or not to
use the local part in the key is a property of the router. */
if ((rc = route_address(addr, &addr_local, &addr_remote, &addr_new,
&addr_succeed, v_none)) == DEFER)
- retry_add_item(addr, (addr->router->retry_use_local_part)?
- string_sprintf("R:%s@%s", addr->local_part, addr->domain) :
- string_sprintf("R:%s", addr->domain), 0);
+ retry_add_item(addr,
+ addr->router->retry_use_local_part
+ ? string_sprintf("R:%s@%s", addr->local_part, addr->domain)
+ : string_sprintf("R:%s", addr->domain),
+ 0);
/* Otherwise, if there is an existing retry record in the database, add
retry items to delete both forms. We must also allow for the possibility
else if (testflag(addr, af_dr_retry_exists))
{
- uschar *altkey = string_sprintf("%s:<%s>", addr->address_retry_key,
+ uschar * altkey = string_sprintf("%s:<%s>", addr->address_retry_key,
sender_address);
retry_add_item(addr, altkey, rf_delete);
retry_add_item(addr, addr->address_retry_key, rf_delete);
if (rc != OK)
{
- (void)post_process_one(addr, rc, LOG_MAIN, DTYPE_ROUTER, 0);
+ (void)post_process_one(addr, rc, LOG_MAIN, EXIM_DTYPE_ROUTER, 0);
continue; /* route next address */
}
has already been delivered, because it's the unique address that finally
gets recorded. */
- if (addr->unique != old_unique &&
- tree_search(tree_nonrecipients, addr->unique) != 0)
+ if ( addr->unique != old_unique
+ && tree_search(tree_nonrecipients, addr->unique) != 0
+ )
{
DEBUG(D_deliver|D_route) debug_printf("%s was previously delivered: "
"discarded\n", addr->address);
to a remote transport, there are no header changes, and the domain was not
modified by the router. */
- if (addr_remote == addr &&
- addr->router->same_domain_copy_routing &&
- addr->p.extra_headers == NULL &&
- addr->p.remove_headers == NULL &&
- old_domain == addr->domain)
+ if ( addr_remote == addr
+ && addr->router->same_domain_copy_routing
+ && !addr->prop.extra_headers
+ && !addr->prop.remove_headers
+ && old_domain == addr->domain
+ )
{
address_item **chain = &addr_route;
- while (*chain != NULL)
+ while (*chain)
{
address_item *addr2 = *chain;
if (Ustrcmp(addr2->domain, addr->domain) != 0)
addr2->transport = addr->transport;
addr2->host_list = addr->host_list;
addr2->fallback_hosts = addr->fallback_hosts;
- addr2->p.errors_address = addr->p.errors_address;
- copyflag(addr2, addr, af_hide_child | af_local_host_removed);
+ addr2->prop.errors_address = addr->prop.errors_address;
+ copyflag(addr2, addr, af_hide_child);
+ copyflag(addr2, addr, af_local_host_removed);
DEBUG(D_deliver|D_route)
- {
debug_printf(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>\n"
"routing %s\n"
"Routing for %s copied from %s\n",
addr2->address, addr2->address, addr->address);
- }
}
}
} /* Continue with routing the next address. */
} /* Loop to process any child addresses that the routers created, and
- any rerouted addresses that got put back on the new chain. */
-
+ any rerouted addresses that got put back on the new chain. */
/* Debugging: show the results of the routing */
DEBUG(D_deliver|D_retry|D_route)
{
- address_item *p = addr_local;
debug_printf(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>\n");
debug_printf("After routing:\n Local deliveries:\n");
- while (p != NULL)
- {
+ for (address_item * p = addr_local; p; p = p->next)
debug_printf(" %s\n", p->address);
- p = p->next;
- }
- p = addr_remote;
debug_printf(" Remote deliveries:\n");
- while (p != NULL)
- {
+ for (address_item * p = addr_remote; p; p = p->next)
debug_printf(" %s\n", p->address);
- p = p->next;
- }
- p = addr_failed;
debug_printf(" Failed addresses:\n");
- while (p != NULL)
- {
+ for (address_item * p = addr_failed; p; p = p->next)
debug_printf(" %s\n", p->address);
- p = p->next;
- }
- p = addr_defer;
debug_printf(" Deferred addresses:\n");
- while (p != NULL)
- {
+ for (address_item * p = addr_defer; p; p = p->next)
debug_printf(" %s\n", p->address);
- p = p->next;
- }
}
/* Free any resources that were cached during routing. */
remote transport. The check that they all end up in one transaction happens in
the do_remote_deliveries() function. */
-if (mua_wrapper && (addr_local != NULL || addr_failed != NULL ||
- addr_defer != NULL))
+if ( mua_wrapper
+ && (addr_local || addr_failed || addr_defer)
+ )
{
address_item *addr;
uschar *which, *colon, *msg;
- if (addr_local != NULL)
+ if (addr_local)
{
addr = addr_local;
which = US"local";
}
- else if (addr_defer != NULL)
+ else if (addr_defer)
{
addr = addr_defer;
which = US"deferred";
which = US"failed";
}
- while (addr->parent != NULL) addr = addr->parent;
+ while (addr->parent) addr = addr->parent;
- if (addr->message != NULL)
+ if (addr->message)
{
colon = US": ";
msg = addr->message;
/* If this is a run to continue deliveries to an external channel that is
-already set up, defer any local deliveries. */
+already set up, defer any local deliveries because we are handling remotes.
-if (continue_transport != NULL)
+To avoid delaying a local when combined with a callout-hold for a remote
+delivery, test continue_sequence rather than continue_transport. */
+
+if (continue_sequence > 1 && addr_local)
{
- if (addr_defer == NULL) addr_defer = addr_local; else
+ DEBUG(D_deliver|D_retry|D_route)
+ debug_printf("deferring local deliveries due to continued-transport\n");
+ if (addr_defer)
{
- address_item *addr = addr_defer;
- while (addr->next != NULL) addr = addr->next;
+ address_item * addr = addr_defer;
+ while (addr->next) addr = addr->next;
addr->next = addr_local;
}
+ else
+ addr_defer = addr_local;
addr_local = NULL;
}
there is only address to be delivered - if it succeeds the spool write need not
happen. */
-if (header_rewritten &&
- ((addr_local != NULL &&
- (addr_local->next != NULL || addr_remote != NULL)) ||
- (addr_remote != NULL && addr_remote->next != NULL)))
+if ( f.header_rewritten
+ && ( addr_local && (addr_local->next || addr_remote)
+ || addr_remote && addr_remote->next
+ ) )
{
/* Panic-dies on error */
(void)spool_write_header(message_id, SW_DELIVERING, NULL);
- header_rewritten = FALSE;
+ f.header_rewritten = FALSE;
}
-/* If there are any deliveries to be done, open the journal file. This is used
-to record successful deliveries as soon as possible after each delivery is
-known to be complete. A file opened with O_APPEND is used so that several
-processes can run simultaneously.
+/* If there are any deliveries to do and we do not already have the journal
+file, create it. This is used to record successful deliveries as soon as
+possible after each delivery is known to be complete. A file opened with
+O_APPEND is used so that several processes can run simultaneously.
The journal is just insurance against crashes. When the spool file is
ultimately updated at the end of processing, the journal is deleted. If a
journal is found to exist at the start of delivery, the addresses listed
therein are added to the non-recipients. */
-if (addr_local != NULL || addr_remote != NULL)
+if (addr_local || addr_remote)
{
- sprintf(CS spoolname, "%s/input/%s/%s-J", spool_directory, message_subdir, id);
- journal_fd = Uopen(spoolname, O_WRONLY|O_APPEND|O_CREAT, SPOOL_MODE);
-
if (journal_fd < 0)
{
- log_write(0, LOG_MAIN|LOG_PANIC, "Couldn't open journal file %s: %s",
- spoolname, strerror(errno));
- return DELIVER_NOT_ATTEMPTED;
- }
+ uschar * fname = spool_fname(US"input", message_subdir, id, US"-J");
- /* Set the close-on-exec flag, make the file owned by Exim, and ensure
- that the mode is correct - the group setting doesn't always seem to get
- set automatically. */
+ if ((journal_fd = Uopen(fname,
+ EXIM_CLOEXEC | O_WRONLY|O_APPEND|O_CREAT|O_EXCL, SPOOL_MODE)) < 0)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC, "Couldn't open journal file %s: %s",
+ fname, strerror(errno));
+ return DELIVER_NOT_ATTEMPTED;
+ }
- if( fcntl(journal_fd, F_SETFD, fcntl(journal_fd, F_GETFD) | FD_CLOEXEC)
- || fchown(journal_fd, exim_uid, exim_gid)
- || fchmod(journal_fd, SPOOL_MODE)
- )
- {
- int ret = Uunlink(spoolname);
- log_write(0, LOG_MAIN|LOG_PANIC, "Couldn't set perms on journal file %s: %s",
- spoolname, strerror(errno));
- if(ret && errno != ENOENT)
- log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to unlink %s: %s",
- spoolname, strerror(errno));
- return DELIVER_NOT_ATTEMPTED;
+ /* Set the close-on-exec flag, make the file owned by Exim, and ensure
+ that the mode is correct - the group setting doesn't always seem to get
+ set automatically. */
+
+ if( exim_fchown(journal_fd, exim_uid, exim_gid, fname)
+ || fchmod(journal_fd, SPOOL_MODE)
+#ifndef O_CLOEXEC
+ || fcntl(journal_fd, F_SETFD, fcntl(journal_fd, F_GETFD) | FD_CLOEXEC)
+#endif
+ )
+ {
+ int ret = Uunlink(fname);
+ log_write(0, LOG_MAIN|LOG_PANIC, "Couldn't set perms on journal file %s: %s",
+ fname, strerror(errno));
+ if(ret && errno != ENOENT)
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to unlink %s: %s",
+ fname, strerror(errno));
+ return DELIVER_NOT_ATTEMPTED;
+ }
}
}
+else if (journal_fd >= 0)
+ {
+ close(journal_fd);
+ journal_fd = -1;
+ }
to an LHLO command, if is isn't already compiled. This may be used on both
local and remote LMTP deliveries. */
-if (regex_IGNOREQUOTA == NULL) regex_IGNOREQUOTA =
- regex_must_compile(US"\\n250[\\s\\-]IGNOREQUOTA(\\s|\\n|$)", FALSE, TRUE);
+if (!regex_IGNOREQUOTA)
+ regex_IGNOREQUOTA =
+ regex_must_compile(US"\\n250[\\s\\-]IGNOREQUOTA(\\s|\\n|$)", MCS_NOFLAGS, TRUE);
/* Handle local deliveries */
-if (addr_local != NULL)
+if (addr_local)
{
DEBUG(D_deliver|D_transport)
debug_printf(">>>>>>>>>>>>>>>> Local deliveries >>>>>>>>>>>>>>>>\n");
do_local_deliveries();
- disable_logging = FALSE;
+ f.disable_logging = FALSE;
}
/* If queue_run_local is set, we do not want to attempt any remote deliveries,
so just queue them all. */
-if (queue_run_local)
- {
- while (addr_remote != NULL)
+if (f.queue_run_local)
+ while (addr_remote)
{
address_item *addr = addr_remote;
addr_remote = addr->next;
addr->next = NULL;
addr->basic_errno = ERRNO_LOCAL_ONLY;
addr->message = US"remote deliveries suppressed";
- (void)post_process_one(addr, DEFER, LOG_MAIN, DTYPE_TRANSPORT, 0);
+ (void)post_process_one(addr, DEFER, LOG_MAIN, EXIM_DTYPE_TRANSPORT, 0);
}
- }
/* Handle remote deliveries */
-if (addr_remote != NULL)
+if (addr_remote)
{
DEBUG(D_deliver|D_transport)
debug_printf(">>>>>>>>>>>>>>>> Remote deliveries >>>>>>>>>>>>>>>>\n");
/* Precompile some regex that are used to recognize parameters in response
to an EHLO command, if they aren't already compiled. */
- if (regex_PIPELINING == NULL) regex_PIPELINING =
- regex_must_compile(US"\\n250[\\s\\-]PIPELINING(\\s|\\n|$)", FALSE, TRUE);
-
- if (regex_SIZE == NULL) regex_SIZE =
- regex_must_compile(US"\\n250[\\s\\-]SIZE(\\s|\\n|$)", FALSE, TRUE);
-
- if (regex_AUTH == NULL) regex_AUTH =
- regex_must_compile(US"\\n250[\\s\\-]AUTH\\s+([\\-\\w\\s]+)(?:\\n|$)",
- FALSE, TRUE);
-
-#ifdef SUPPORT_TLS
- if (regex_STARTTLS == NULL) regex_STARTTLS =
- regex_must_compile(US"\\n250[\\s\\-]STARTTLS(\\s|\\n|$)", FALSE, TRUE);
-#endif
-
-#ifndef DISABLE_PRDR
- if (regex_PRDR == NULL) regex_PRDR =
- regex_must_compile(US"\\n250[\\s\\-]PRDR(\\s|\\n|$)", FALSE, TRUE);
-#endif
-
- /* Set the regex to check for DSN support on remote MTA */
- if (regex_DSN == NULL) regex_DSN =
- regex_must_compile(US"\\n250[\\s\\-]DSN(\\s|\\n|$)", FALSE, TRUE);
+ smtp_deliver_init();
/* Now sort the addresses if required, and do the deliveries. The yield of
do_remote_deliveries is FALSE when mua_wrapper is set and all addresses
cannot be delivered in one transaction. */
- if (remote_sort_domains != NULL) sort_remote_deliveries();
+ if (remote_sort_domains) sort_remote_deliveries();
if (!do_remote_deliveries(FALSE))
{
log_write(0, LOG_MAIN, "** mua_wrapper is set but recipients cannot all "
host is used for many domains, so all can be sent in a single transaction
(if appropriately configured). */
- if (addr_fallback != NULL && !mua_wrapper)
+ if (addr_fallback && !mua_wrapper)
{
DEBUG(D_deliver) debug_printf("Delivering to fallback hosts\n");
addr_remote = addr_fallback;
addr_fallback = NULL;
- if (remote_sort_domains != NULL) sort_remote_deliveries();
+ if (remote_sort_domains) sort_remote_deliveries();
do_remote_deliveries(TRUE);
}
- disable_logging = FALSE;
+ f.disable_logging = FALSE;
}
DEBUG(D_deliver)
debug_printf(">>>>>>>>>>>>>>>> deliveries are done >>>>>>>>>>>>>>>>\n");
+cancel_cutthrough_connection(TRUE, US"deliveries are done");
/* Root privilege is no longer needed */
do not ever want to retry, nor do we want to send a bounce message. */
if (mua_wrapper)
- {
- if (addr_defer != NULL)
- {
- address_item *addr, *nextaddr;
- for (addr = addr_defer; addr != NULL; addr = nextaddr)
- {
- log_write(0, LOG_MAIN, "** %s mua_wrapper forced failure for deferred "
- "delivery", addr->address);
- nextaddr = addr->next;
- addr->next = addr_failed;
- addr_failed = addr;
- }
- addr_defer = NULL;
- }
-
- /* Now all should either have succeeded or failed. */
-
- if (addr_failed == NULL) final_yield = DELIVER_MUA_SUCCEEDED; else
- {
- uschar *s = (addr_failed->user_message != NULL)?
- addr_failed->user_message : addr_failed->message;
- host_item * host;
-
- fprintf(stderr, "Delivery failed: ");
- if (addr_failed->basic_errno > 0)
- {
- fprintf(stderr, "%s", strerror(addr_failed->basic_errno));
- if (s != NULL) fprintf(stderr, ": ");
- }
- if ((host = addr_failed->host_used))
- fprintf(stderr, "H=%s [%s]: ", host->name, host->address);
- if (s == NULL)
- {
- if (addr_failed->basic_errno <= 0) fprintf(stderr, "unknown error");
- }
- else fprintf(stderr, "%s", CS s);
- fprintf(stderr, "\n");
-
- final_yield = DELIVER_MUA_FAILED;
- addr_failed = NULL;
- }
- }
-
-/* In a normal configuration, we now update the retry database. This is done in
-one fell swoop at the end in order not to keep opening and closing (and
-locking) the database. The code for handling retries is hived off into a
-separate module for convenience. We pass it the addresses of the various
-chains, because deferred addresses can get moved onto the failed chain if the
-retry cutoff time has expired for all alternative destinations. Bypass the
-updating of the database if the -N flag is set, which is a debugging thing that
-prevents actual delivery. */
-
-else if (!dont_deliver) retry_update(&addr_defer, &addr_failed, &addr_succeed);
-
-/* Send DSN for successful messages */
-addr_dsntmp = addr_succeed;
-addr_senddsn = NULL;
-
-while(addr_dsntmp != NULL)
- {
- DEBUG(D_deliver)
- debug_printf("DSN: processing router : %s\n", addr_dsntmp->router->name);
-
- DEBUG(D_deliver)
- debug_printf("DSN: processing successful delivery address: %s\n", addr_dsntmp->address);
-
- /* af_ignore_error not honored here. it's not an error */
-
- DEBUG(D_deliver) debug_printf("DSN: Sender_address: %s\n", sender_address);
- DEBUG(D_deliver) debug_printf("DSN: orcpt: %s flags: %d\n", addr_dsntmp->dsn_orcpt, addr_dsntmp->dsn_flags);
- DEBUG(D_deliver) debug_printf("DSN: envid: %s ret: %d\n", dsn_envid, dsn_ret);
- DEBUG(D_deliver) debug_printf("DSN: Final recipient: %s\n", addr_dsntmp->address);
- DEBUG(D_deliver) debug_printf("DSN: Remote SMTP server supports DSN: %d\n", addr_dsntmp->dsn_aware);
-
- /* send report if next hop not DSN aware or a router flagged "last DSN hop"
- and a report was requested */
- if (((addr_dsntmp->dsn_aware != dsn_support_yes) ||
- ((addr_dsntmp->dsn_flags & rf_dsnlasthop) != 0))
- &&
- (((addr_dsntmp->dsn_flags & rf_dsnflags) != 0) &&
- ((addr_dsntmp->dsn_flags & rf_notify_success) != 0)))
- {
- /* copy and relink address_item and send report with all of them at once later */
- address_item *addr_next;
- addr_next = addr_senddsn;
- addr_senddsn = store_get(sizeof(address_item));
- memcpy(addr_senddsn, addr_dsntmp, sizeof(address_item));
- addr_senddsn->next = addr_next;
- }
- else
- {
- DEBUG(D_deliver) debug_printf("DSN: *** NOT SENDING DSN SUCCESS Message ***\n");
- }
-
- addr_dsntmp = addr_dsntmp->next;
- }
-
-if (addr_senddsn != NULL)
- {
- pid_t pid;
- int fd;
-
- /* create exim process to send message */
- pid = child_open_exim(&fd);
-
- DEBUG(D_deliver) debug_printf("DSN: child_open_exim returns: %d\n", pid);
-
- if (pid < 0) /* Creation of child failed */
- {
- log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Process %d (parent %d) failed to "
- "create child process to send failure message: %s", getpid(),
- getppid(), strerror(errno));
-
- DEBUG(D_deliver) debug_printf("DSN: child_open_exim failed\n");
-
- }
- else /* Creation of child succeeded */
- {
- FILE *f = fdopen(fd, "wb");
- /* header only as required by RFC. only failure DSN needs to honor RET=FULL */
- int topt = topt_add_return_path | topt_no_body;
- uschar * bound;
-
- DEBUG(D_deliver) debug_printf("sending error message to: %s\n", sender_address);
-
- /* build unique id for MIME boundary */
- bound = string_sprintf(TIME_T_FMT "-eximdsn-%d", time(NULL), rand());
- DEBUG(D_deliver) debug_printf("DSN: MIME boundary: %s\n", bound);
-
- if (errors_reply_to)
- fprintf(f, "Reply-To: %s\n", errors_reply_to);
-
- fprintf(f, "Auto-Submitted: auto-generated\n"
- "From: Mail Delivery System <Mailer-Daemon@%s>\n"
- "To: %s\n"
- "Subject: Delivery Status Notification\n"
- "Content-Type: multipart/report; report-type=delivery-status; boundary=%s\n"
- "MIME-Version: 1.0\n\n"
-
- "--%s\n"
- "Content-type: text/plain; charset=us-ascii\n\n"
-
- "This message was created automatically by mail delivery software.\n"
- " ----- The following addresses had successful delivery notifications -----\n",
- qualify_domain_sender, sender_address, bound, bound);
-
- addr_dsntmp = addr_senddsn;
- while(addr_dsntmp)
- {
- fprintf(f, "<%s> (relayed %s)\n\n",
- addr_dsntmp->address,
- (addr_dsntmp->dsn_flags & rf_dsnlasthop) == 1
- ? "via non DSN router"
- : addr_dsntmp->dsn_aware == dsn_support_no
- ? "to non-DSN-aware mailer"
- : "via non \"Remote SMTP\" router"
- );
- addr_dsntmp = addr_dsntmp->next;
- }
- fprintf(f, "--%s\n"
- "Content-type: message/delivery-status\n\n"
- "Reporting-MTA: dns; %s\n",
- bound, smtp_active_hostname);
-
- if (dsn_envid != NULL) {
- /* must be decoded from xtext: see RFC 3461:6.3a */
- uschar *xdec_envid;
- if (auth_xtextdecode(dsn_envid, &xdec_envid) > 0)
- fprintf(f, "Original-Envelope-ID: %s\n", dsn_envid);
- else
- fprintf(f, "X-Original-Envelope-ID: error decoding xtext formated ENVID\n");
- }
- fputc('\n', f);
-
- for (addr_dsntmp = addr_senddsn;
- addr_dsntmp;
- addr_dsntmp = addr_dsntmp->next)
- {
- if (addr_dsntmp->dsn_orcpt)
- fprintf(f,"Original-Recipient: %s\n", addr_dsntmp->dsn_orcpt);
-
- fprintf(f, "Action: delivered\n"
- "Final-Recipient: rfc822;%s\n"
- "Status: 2.0.0\n",
- addr_dsntmp->address);
-
- if (addr_dsntmp->host_used && addr_dsntmp->host_used->name)
- fprintf(f, "Remote-MTA: dns; %s\nDiagnostic-Code: smtp; 250 Ok\n",
- addr_dsntmp->host_used->name);
- else
- fprintf(f,"Diagnostic-Code: X-Exim; relayed via non %s router\n",
- (addr_dsntmp->dsn_flags & rf_dsnlasthop) == 1 ? "DSN" : "SMTP");
- fputc('\n', f);
- }
-
- fprintf(f, "--%s\nContent-type: text/rfc822-headers\n\n", bound);
-
- fflush(f);
- transport_filter_argv = NULL; /* Just in case */
- return_path = sender_address; /* In case not previously set */
-
- /* Write the original email out */
- transport_write_message(NULL, fileno(f), topt, 0, NULL, NULL, NULL, NULL, NULL, 0);
- fflush(f);
-
- fprintf(f,"\n--%s--\n", bound);
-
- fflush(f);
- fclose(f);
- rc = child_close(pid, 0); /* Waits for child to close, no timeout */
- }
- }
-
-/* If any addresses failed, we must send a message to somebody, unless
-af_ignore_error is set, in which case no action is taken. It is possible for
-several messages to get sent if there are addresses with different
-requirements. */
-
-while (addr_failed != NULL)
- {
- pid_t pid;
- int fd;
- uschar *logtod = tod_stamp(tod_log);
- address_item *addr;
- address_item *handled_addr = NULL;
- address_item **paddr;
- address_item *msgchain = NULL;
- address_item **pmsgchain = &msgchain;
-
- /* There are weird cases when logging is disabled in the transport. However,
- there may not be a transport (address failed by a router). */
-
- disable_logging = FALSE;
- if (addr_failed->transport != NULL)
- disable_logging = addr_failed->transport->disable_logging;
-
- DEBUG(D_deliver)
- debug_printf("processing failed address %s\n", addr_failed->address);
-
- /* There are only two ways an address in a bounce message can get here:
-
- (1) When delivery was initially deferred, but has now timed out (in the call
- to retry_update() above). We can detect this by testing for
- af_retry_timedout. If the address does not have its own errors address,
- we arrange to ignore the error.
-
- (2) If delivery failures for bounce messages are being ignored. We can detect
- this by testing for af_ignore_error. This will also be set if a bounce
- message has been autothawed and the ignore_bounce_errors_after time has
- passed. It might also be set if a router was explicitly configured to
- ignore errors (errors_to = "").
-
- If neither of these cases obtains, something has gone wrong. Log the
- incident, but then ignore the error. */
-
- if (sender_address[0] == 0 && addr_failed->p.errors_address == NULL)
- {
- if (!testflag(addr_failed, af_retry_timedout) &&
- !testflag(addr_failed, af_ignore_error))
- {
- log_write(0, LOG_MAIN|LOG_PANIC, "internal error: bounce message "
- "failure is neither frozen nor ignored (it's been ignored)");
- }
- setflag(addr_failed, af_ignore_error);
- }
-
- /* If the first address on the list has af_ignore_error set, just remove
- it from the list, throw away any saved message file, log it, and
- mark the recipient done. */
-
- if ( testflag(addr_failed, af_ignore_error)
- || ( ((addr_failed->dsn_flags & rf_dsnflags) != 0)
- && ((addr_failed->dsn_flags & rf_notify_failure) != rf_notify_failure))
- )
- {
- addr = addr_failed;
- addr_failed = addr->next;
- if (addr->return_filename != NULL) Uunlink(addr->return_filename);
-
- log_write(0, LOG_MAIN, "%s%s%s%s: error ignored",
- addr->address,
- (addr->parent == NULL)? US"" : US" <",
- (addr->parent == NULL)? US"" : addr->parent->address,
- (addr->parent == NULL)? US"" : US">");
-
- address_done(addr, logtod);
- child_done(addr, logtod);
- /* Panic-dies on error */
- (void)spool_write_header(message_id, SW_DELIVERING, NULL);
- }
-
- /* Otherwise, handle the sending of a message. Find the error address for
- the first address, then send a message that includes all failed addresses
- that have the same error address. Note the bounce_recipient is a global so
- that it can be accesssed by $bounce_recipient while creating a customized
- error message. */
-
- else
- {
- bounce_recipient = (addr_failed->p.errors_address == NULL)?
- sender_address : addr_failed->p.errors_address;
-
- /* Make a subprocess to send a message */
-
- pid = child_open_exim(&fd);
-
- /* Creation of child failed */
-
- if (pid < 0)
- log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Process %d (parent %d) failed to "
- "create child process to send failure message: %s", getpid(),
- getppid(), strerror(errno));
-
- /* Creation of child succeeded */
-
- else
- {
- int ch, rc;
- int filecount = 0;
- int rcount = 0;
- uschar *bcc, *emf_text;
- FILE *f = fdopen(fd, "wb");
- FILE *emf = NULL;
- BOOL to_sender = strcmpic(sender_address, bounce_recipient) == 0;
- int max = (bounce_return_size_limit/DELIVER_IN_BUFFER_SIZE + 1) *
- DELIVER_IN_BUFFER_SIZE;
- uschar * bound;
- uschar *dsnlimitmsg;
- uschar *dsnnotifyhdr;
- int topt;
-
- DEBUG(D_deliver)
- debug_printf("sending error message to: %s\n", bounce_recipient);
-
- /* Scan the addresses for all that have the same errors address, removing
- them from the addr_failed chain, and putting them on msgchain. */
-
- paddr = &addr_failed;
- for (addr = addr_failed; addr != NULL; addr = *paddr)
- {
- if (Ustrcmp(bounce_recipient, (addr->p.errors_address == NULL)?
- sender_address : addr->p.errors_address) != 0)
- {
- paddr = &(addr->next); /* Not the same; skip */
- }
- else /* The same - dechain */
- {
- *paddr = addr->next;
- *pmsgchain = addr;
- addr->next = NULL;
- pmsgchain = &(addr->next);
- }
- }
-
- /* Include X-Failed-Recipients: for automatic interpretation, but do
- not let any one header line get too long. We do this by starting a
- new header every 50 recipients. Omit any addresses for which the
- "hide_child" flag is set. */
-
- for (addr = msgchain; addr != NULL; addr = addr->next)
- {
- if (testflag(addr, af_hide_child)) continue;
- if (rcount >= 50)
- {
- fprintf(f, "\n");
- rcount = 0;
- }
- fprintf(f, "%s%s",
- (rcount++ == 0)? "X-Failed-Recipients: " : ",\n ",
- (testflag(addr, af_pfr) && addr->parent != NULL)?
- string_printing(addr->parent->address) :
- string_printing(addr->address));
- }
- if (rcount > 0) fprintf(f, "\n");
-
- /* Output the standard headers */
-
- if (errors_reply_to != NULL)
- fprintf(f, "Reply-To: %s\n", errors_reply_to);
- fprintf(f, "Auto-Submitted: auto-replied\n");
- moan_write_from(f);
- fprintf(f, "To: %s\n", bounce_recipient);
-
- /* generate boundary string and output MIME-Headers */
- bound = string_sprintf(TIME_T_FMT "-eximdsn-%d", time(NULL), rand());
-
- fprintf(f, "Content-Type: multipart/report;"
- " report-type=delivery-status; boundary=%s\n"
- "MIME-Version: 1.0\n",
- bound);
-
- /* Open a template file if one is provided. Log failure to open, but
- carry on - default texts will be used. */
-
- if (bounce_message_file)
- if (!(emf = Ufopen(bounce_message_file, "rb")))
- log_write(0, LOG_MAIN|LOG_PANIC, "Failed to open %s for error "
- "message texts: %s", bounce_message_file, strerror(errno));
-
- /* Quietly copy to configured additional addresses if required. */
-
- if ((bcc = moan_check_errorcopy(bounce_recipient)))
- fprintf(f, "Bcc: %s\n", bcc);
-
- /* The texts for the message can be read from a template file; if there
- isn't one, or if it is too short, built-in texts are used. The first
- emf text is a Subject: and any other headers. */
-
- if ((emf_text = next_emf(emf, US"header")))
- fprintf(f, "%s\n", emf_text);
- else
- fprintf(f, "Subject: Mail delivery failed%s\n\n",
- to_sender? ": returning message to sender" : "");
-
- /* output human readable part as text/plain section */
- fprintf(f, "--%s\n"
- "Content-type: text/plain; charset=us-ascii\n\n",
- bound);
-
- if ((emf_text = next_emf(emf, US"intro")))
- fprintf(f, "%s", CS emf_text);
- else
- {
- fprintf(f,
-/* This message has been reworded several times. It seems to be confusing to
-somebody, however it is worded. I have retreated to the original, simple
-wording. */
-"This message was created automatically by mail delivery software.\n");
-
- if (bounce_message_text)
- fprintf(f, "%s", CS bounce_message_text);
- if (to_sender)
- fprintf(f,
-"\nA message that you sent could not be delivered to one or more of its\n"
-"recipients. This is a permanent error. The following address(es) failed:\n");
- else
- fprintf(f,
-"\nA message sent by\n\n <%s>\n\n"
-"could not be delivered to one or more of its recipients. The following\n"
-"address(es) failed:\n", sender_address);
- }
- fputc('\n', f);
-
- /* Process the addresses, leaving them on the msgchain if they have a
- file name for a return message. (There has already been a check in
- post_process_one() for the existence of data in the message file.) A TRUE
- return from print_address_information() means that the address is not
- hidden. */
-
- paddr = &msgchain;
- for (addr = msgchain; addr != NULL; addr = *paddr)
- {
- if (print_address_information(addr, f, US" ", US"\n ", US""))
- print_address_error(addr, f, US"");
-
- /* End the final line for the address */
-
- fputc('\n', f);
-
- /* Leave on msgchain if there's a return file. */
-
- if (addr->return_file >= 0)
- {
- paddr = &(addr->next);
- filecount++;
- }
+ {
+ if (addr_defer)
+ {
+ address_item * nextaddr;
+ for (address_item * addr = addr_defer; addr; addr = nextaddr)
+ {
+ log_write(0, LOG_MAIN, "** %s mua_wrapper forced failure for deferred "
+ "delivery", addr->address);
+ nextaddr = addr->next;
+ addr->next = addr_failed;
+ addr_failed = addr;
+ }
+ addr_defer = NULL;
+ }
- /* Else save so that we can tick off the recipient when the
- message is sent. */
+ /* Now all should either have succeeded or failed. */
- else
- {
- *paddr = addr->next;
- addr->next = handled_addr;
- handled_addr = addr;
- }
- }
+ if (!addr_failed)
+ final_yield = DELIVER_MUA_SUCCEEDED;
+ else
+ {
+ host_item * host;
+ uschar *s = addr_failed->user_message;
- fputc('\n', f);
+ if (!s) s = addr_failed->message;
- /* Get the next text, whether we need it or not, so as to be
- positioned for the one after. */
+ fprintf(stderr, "Delivery failed: ");
+ if (addr_failed->basic_errno > 0)
+ {
+ fprintf(stderr, "%s", strerror(addr_failed->basic_errno));
+ if (s) fprintf(stderr, ": ");
+ }
+ if ((host = addr_failed->host_used))
+ fprintf(stderr, "H=%s [%s]: ", host->name, host->address);
+ if (s)
+ fprintf(stderr, "%s", CS s);
+ else if (addr_failed->basic_errno <= 0)
+ fprintf(stderr, "unknown error");
+ fprintf(stderr, "\n");
- emf_text = next_emf(emf, US"generated text");
+ final_yield = DELIVER_MUA_FAILED;
+ addr_failed = NULL;
+ }
+ }
- /* If there were any file messages passed by the local transports,
- include them in the message. Then put the address on the handled chain.
- In the case of a batch of addresses that were all sent to the same
- transport, the return_file field in all of them will contain the same
- fd, and the return_filename field in the *last* one will be set (to the
- name of the file). */
+/* In a normal configuration, we now update the retry database. This is done in
+one fell swoop at the end in order not to keep opening and closing (and
+locking) the database (at least, for non-transaction-capable DBs.
+The code for handling retries is hived off into a separate module for
+convenience. We pass it the addresses of the various chains,
+because deferred addresses can get moved onto the failed chain if the
+retry cutoff time has expired for all alternative destinations. Bypass the
+updating of the database if the -N flag is set, which is a debugging thing that
+prevents actual delivery. */
- if (msgchain)
- {
- address_item *nextaddr;
+else if (!f.dont_deliver)
+ retry_update(&addr_defer, &addr_failed, &addr_succeed);
- if (emf_text)
- fprintf(f, "%s", CS emf_text);
- else
- fprintf(f,
- "The following text was generated during the delivery "
- "attempt%s:\n", (filecount > 1)? "s" : "");
+/* Send DSN for successful messages if requested */
- for (addr = msgchain; addr != NULL; addr = nextaddr)
- {
- FILE *fm;
- address_item *topaddr = addr;
+maybe_send_dsn(addr_succeed);
- /* List all the addresses that relate to this file */
+/* If any addresses failed, we must send a message to somebody, unless
+af_ignore_error is set, in which case no action is taken. It is possible for
+several messages to get sent if there are addresses with different
+requirements. */
- fputc('\n', f);
- while(addr) /* Insurance */
- {
- print_address_information(addr, f, US"------ ", US"\n ",
- US" ------\n");
- if (addr->return_filename) break;
- addr = addr->next;
- }
- fputc('\n', f);
+while (addr_failed)
+ {
+ const uschar * logtod = tod_stamp(tod_log);
+ address_item * addr;
- /* Now copy the file */
+ /* There are weird cases when logging is disabled in the transport. However,
+ there may not be a transport (address failed by a router). */
- fm = Ufopen(addr->return_filename, "rb");
+ f.disable_logging = FALSE;
+ if (addr_failed->transport)
+ f.disable_logging = addr_failed->transport->disable_logging;
- if (fm == NULL)
- fprintf(f, " +++ Exim error... failed to open text file: %s\n",
- strerror(errno));
- else
- {
- while ((ch = fgetc(fm)) != EOF) fputc(ch, f);
- (void)fclose(fm);
- }
- Uunlink(addr->return_filename);
+ DEBUG(D_deliver)
+ debug_printf("processing failed address %s\n", addr_failed->address);
- /* Can now add to handled chain, first fishing off the next
- address on the msgchain. */
+ /* There are only two ways an address in a bounce message can get here:
- nextaddr = addr->next;
- addr->next = handled_addr;
- handled_addr = topaddr;
- }
- fputc('\n', f);
- }
+ (1) When delivery was initially deferred, but has now timed out (in the call
+ to retry_update() above). We can detect this by testing for
+ af_retry_timedout. If the address does not have its own errors address,
+ we arrange to ignore the error.
- /* output machine readable part */
- fprintf(f, "--%s\n"
- "Content-type: message/delivery-status\n\n"
- "Reporting-MTA: dns; %s\n",
- bound, smtp_active_hostname);
+ (2) If delivery failures for bounce messages are being ignored. We can detect
+ this by testing for af_ignore_error. This will also be set if a bounce
+ message has been autothawed and the ignore_bounce_errors_after time has
+ passed. It might also be set if a router was explicitly configured to
+ ignore errors (errors_to = "").
- if (dsn_envid)
- {
- /* must be decoded from xtext: see RFC 3461:6.3a */
- uschar *xdec_envid;
- if (auth_xtextdecode(dsn_envid, &xdec_envid) > 0)
- fprintf(f, "Original-Envelope-ID: %s\n", dsn_envid);
- else
- fprintf(f, "X-Original-Envelope-ID: error decoding xtext formated ENVID\n");
- }
- fputc('\n', f);
-
- for (addr = handled_addr; addr; addr = addr->next)
- {
- fprintf(f, "Action: failed\n"
- "Final-Recipient: rfc822;%s\n"
- "Status: 5.0.0\n",
- addr->address);
- if (addr->host_used && addr->host_used->name)
- {
- fprintf(f, "Remote-MTA: dns; %s\n",
- addr->host_used->name);
- print_dsn_diagnostic_code(addr, f);
- }
- }
+ If neither of these cases obtains, something has gone wrong. Log the
+ incident, but then ignore the error. */
- /* Now copy the message, trying to give an intelligible comment if
- it is too long for it all to be copied. The limit isn't strictly
- applied because of the buffering. There is, however, an option
- to suppress copying altogether. */
-
- emf_text = next_emf(emf, US"copy");
-
- /* add message body
- we ignore the intro text from template and add
- the text for bounce_return_size_limit at the end.
-
- bounce_return_message is ignored
- in case RET= is defined we honor these values
- otherwise bounce_return_body is honored.
-
- bounce_return_size_limit is always honored.
- */
-
- fprintf(f, "\n--%s\n", bound);
-
- dsnlimitmsg = US"X-Exim-DSN-Information: Due to administrative limits only headers are returned";
- dsnnotifyhdr = NULL;
- topt = topt_add_return_path;
-
- /* RET=HDRS? top priority */
- if (dsn_ret == dsn_ret_hdrs)
- topt |= topt_no_body;
- else
- /* no full body return at all? */
- if (!bounce_return_body)
- {
- topt |= topt_no_body;
- /* add header if we overrule RET=FULL */
- if (dsn_ret == dsn_ret_full)
- dsnnotifyhdr = dsnlimitmsg;
- }
- /* size limited ... return headers only if limit reached */
- else if (bounce_return_size_limit > 0)
- {
- struct stat statbuf;
- if (fstat(deliver_datafile, &statbuf) == 0 && statbuf.st_size > max)
- {
- topt |= topt_no_body;
- dsnnotifyhdr = dsnlimitmsg;
- }
- }
-
- if (topt & topt_no_body)
- fprintf(f,"Content-type: text/rfc822-headers\n\n");
- else
- fprintf(f,"Content-type: message/rfc822\n\n");
-
- fflush(f);
- transport_filter_argv = NULL; /* Just in case */
- return_path = sender_address; /* In case not previously set */
- transport_write_message(NULL, fileno(f), topt,
- 0, dsnnotifyhdr, NULL, NULL, NULL, NULL, 0);
- fflush(f);
-
- /* we never add the final text. close the file */
- if (emf)
- (void)fclose(emf);
-
- fprintf(f, "\n--%s--\n", bound);
-
- /* Close the file, which should send an EOF to the child process
- that is receiving the message. Wait for it to finish. */
+ if (sender_address[0] == 0 && !addr_failed->prop.errors_address)
+ {
+ if ( !testflag(addr_failed, af_retry_timedout)
+ && !addr_failed->prop.ignore_error)
+ log_write(0, LOG_MAIN|LOG_PANIC, "internal error: bounce message "
+ "failure is neither frozen nor ignored (it's been ignored)");
- (void)fclose(f);
- rc = child_close(pid, 0); /* Waits for child to close, no timeout */
+ addr_failed->prop.ignore_error = TRUE;
+ }
- /* In the test harness, let the child do it's thing first. */
+ /* If the first address on the list has af_ignore_error set, just remove
+ it from the list, throw away any saved message file, log it, and
+ mark the recipient done. */
- if (running_in_test_harness) millisleep(500);
+ if ( addr_failed->prop.ignore_error
+ || addr_failed->dsn_flags & rf_dsnflags
+ && !(addr_failed->dsn_flags & rf_notify_failure)
+ )
+ {
+ addr = addr_failed;
+ addr_failed = addr->next;
+ if (addr->return_filename) Uunlink(addr->return_filename);
- /* If the process failed, there was some disaster in setting up the
- error message. Unless the message is very old, ensure that addr_defer
- is non-null, which will have the effect of leaving the message on the
- spool. The failed addresses will get tried again next time. However, we
- don't really want this to happen too often, so freeze the message unless
- there are some genuine deferred addresses to try. To do this we have
- to call spool_write_header() here, because with no genuine deferred
- addresses the normal code below doesn't get run. */
+#ifndef DISABLE_EVENT
+ msg_event_raise(US"msg:fail:delivery", addr);
+#endif
+ log_write(0, LOG_MAIN, "%s%s%s%s: error ignored%s",
+ addr->address,
+ !addr->parent ? US"" : US" <",
+ !addr->parent ? US"" : addr->parent->address,
+ !addr->parent ? US"" : US">",
+ addr->prop.ignore_error
+ ? US"" : US": RFC 3461 DSN, failure notify not requested");
- if (rc != 0)
- {
- uschar *s = US"";
- if (now - received_time < retry_maximum_timeout && addr_defer == NULL)
- {
- addr_defer = (address_item *)(+1);
- deliver_freeze = TRUE;
- deliver_frozen_at = time(NULL);
- /* Panic-dies on error */
- (void)spool_write_header(message_id, SW_DELIVERING, NULL);
- s = US" (frozen)";
- }
- deliver_msglog("Process failed (%d) when writing error message "
- "to %s%s", rc, bounce_recipient, s);
- log_write(0, LOG_MAIN, "Process failed (%d) when writing error message "
- "to %s%s", rc, bounce_recipient, s);
- }
+ address_done(addr, logtod);
+ child_done(addr, logtod);
+ /* Panic-dies on error */
+ (void)spool_write_header(message_id, SW_DELIVERING, NULL);
+ }
- /* The message succeeded. Ensure that the recipients that failed are
- now marked finished with on the spool and their parents updated. */
+ /* Otherwise, handle the sending of a message. Find the error address for
+ the first address, then send a message that includes all failed addresses
+ that have the same error address. */
- else
- {
- for (addr = handled_addr; addr != NULL; addr = addr->next)
- {
- address_done(addr, logtod);
- child_done(addr, logtod);
- }
- /* Panic-dies on error */
- (void)spool_write_header(message_id, SW_DELIVERING, NULL);
- }
- }
- }
+ else
+ send_bounce_message(now, logtod);
}
-disable_logging = FALSE; /* In case left set */
+f.disable_logging = FALSE; /* In case left set */
/* Come here from the mua_wrapper case if routing goes wrong */
DELIVERY_TIDYUP:
+if (dbm_file) /* Can only be continue_retry_db */
+ {
+ DEBUG(D_hints_lookup) debug_printf("final close of cached retry db\n");
+ dbfn_close_multi(continue_retry_db);
+ continue_retry_db = dbm_file = NULL;
+ }
+
/* If there are now no deferred addresses, we are done. Preserve the
message log if so configured, and we are using them. Otherwise, sling it.
Then delete the message itself. */
-if (addr_defer == NULL)
+if (!addr_defer)
{
+ uschar * fname;
+
if (message_logs)
{
- sprintf(CS spoolname, "%s/msglog/%s/%s", spool_directory, message_subdir,
- id);
+ fname = spool_fname(US"msglog", message_subdir, id, US"");
if (preserve_message_logs)
{
int rc;
- sprintf(CS big_buffer, "%s/msglog.OLD/%s", spool_directory, id);
- if ((rc = Urename(spoolname, big_buffer)) < 0)
+ uschar * moname = spool_fname(US"msglog.OLD", US"", id, US"");
+
+ if ((rc = Urename(fname, moname)) < 0)
{
- (void)directory_make(spool_directory, US"msglog.OLD",
- MSGLOG_DIRECTORY_MODE, TRUE);
- rc = Urename(spoolname, big_buffer);
+ (void)directory_make(spool_directory,
+ spool_sname(US"msglog.OLD", US""),
+ MSGLOG_DIRECTORY_MODE, TRUE);
+ rc = Urename(fname, moname);
}
if (rc < 0)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to move %s to the "
- "msglog.OLD directory", spoolname);
+ "msglog.OLD directory", fname);
}
else
- {
- if (Uunlink(spoolname) < 0)
+ if (Uunlink(fname) < 0)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to unlink %s: %s",
- spoolname, strerror(errno));
- }
+ fname, strerror(errno));
}
/* Remove the two message files. */
- sprintf(CS spoolname, "%s/input/%s/%s-D", spool_directory, message_subdir, id);
- if (Uunlink(spoolname) < 0)
+ fname = spool_fname(US"input", message_subdir, id, US"-D");
+ if (Uunlink(fname) < 0)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to unlink %s: %s",
- spoolname, strerror(errno));
- sprintf(CS spoolname, "%s/input/%s/%s-H", spool_directory, message_subdir, id);
- if (Uunlink(spoolname) < 0)
+ fname, strerror(errno));
+ fname = spool_fname(US"input", message_subdir, id, US"-H");
+ if (Uunlink(fname) < 0)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to unlink %s: %s",
- spoolname, strerror(errno));
+ fname, strerror(errno));
/* Log the end of this message, with queue time if requested. */
- if ((log_extra_selector & LX_queue_time_overall) != 0)
- log_write(0, LOG_MAIN, "Completed QT=%s",
- readconf_printtime( (int) ((long)time(NULL) - (long)received_time)) );
+ if (LOGGING(queue_time_overall))
+ log_write(0, LOG_MAIN, "Completed QT=%s", string_timesince(&received_time));
else
log_write(0, LOG_MAIN, "Completed");
/* Unset deliver_freeze so that we won't try to move the spool files further down */
- deliver_freeze = FALSE;
+ f.deliver_freeze = FALSE;
-#ifdef EXPERIMENTAL_EVENT
- (void) event_raise(event_action, US"msg:complete", NULL);
+#ifndef DISABLE_EVENT
+ (void) event_raise(event_action, US"msg:complete", NULL, NULL);
#endif
-}
+ }
/* If there are deferred addresses, we are keeping this message because it is
not yet completed. Lose any temporary files that were catching output from
If all the deferred addresses have an error number that indicates "retry time
not reached", skip sending the warning message, because it won't contain the
reason for the delay. It will get sent at the next real delivery attempt.
+ Exception: for retries caused by a remote peer we use the error message
+ store in the retry DB as the reason.
However, if at least one address has tried, we'd better include all of them in
the message.
else if (addr_defer != (address_item *)(+1))
{
- address_item *addr;
- uschar *recipients = US"";
- BOOL delivery_attempted = FALSE;
+ uschar * recipients = US"";
+ BOOL want_warning_msg = FALSE;
- deliver_domain = testflag(addr_defer, af_pfr)?
- addr_defer->parent->domain : addr_defer->domain;
+ deliver_domain = testflag(addr_defer, af_pfr)
+ ? addr_defer->parent->domain : addr_defer->domain;
- for (addr = addr_defer; addr != NULL; addr = addr->next)
+ for (address_item * addr = addr_defer; addr; addr = addr->next)
{
- address_item *otaddr;
+ address_item * otaddr;
- if (addr->basic_errno > ERRNO_RETRY_BASE) delivery_attempted = TRUE;
+ if (addr->basic_errno > ERRNO_WARN_BASE) want_warning_msg = TRUE;
- if (deliver_domain != NULL)
+ if (deliver_domain)
{
- uschar *d = (testflag(addr, af_pfr))? addr->parent->domain : addr->domain;
+ const uschar *d = testflag(addr, af_pfr)
+ ? addr->parent->domain : addr->domain;
/* The domain may be unset for an address that has never been routed
because the system filter froze the message. */
- if (d == NULL || Ustrcmp(d, deliver_domain) != 0) deliver_domain = NULL;
+ if (!d || Ustrcmp(d, deliver_domain) != 0)
+ deliver_domain = NULL;
}
- if (addr->return_filename != NULL) Uunlink(addr->return_filename);
+ if (addr->return_filename) Uunlink(addr->return_filename);
/* Handle the case of one-time aliases. If any address in the ancestry
of this one is flagged, ensure it is in the recipients list, suitably
flagged, and that its parent is marked delivered. */
- for (otaddr = addr; otaddr != NULL; otaddr = otaddr->parent)
- if (otaddr->onetime_parent != NULL) break;
+ for (otaddr = addr; otaddr; otaddr = otaddr->parent)
+ if (otaddr->onetime_parent) break;
- if (otaddr != NULL)
+ if (otaddr)
{
int i;
int t = recipients_count;
for (i = 0; i < recipients_count; i++)
{
- uschar *r = recipients_list[i].address;
+ const uschar * r = recipients_list[i].address;
if (Ustrcmp(otaddr->onetime_parent, r) == 0) t = i;
if (Ustrcmp(otaddr->address, r) == 0) break;
}
/* Didn't find the address already in the list, and did find the
- ultimate parent's address in the list. After adding the recipient,
+ ultimate parent's address in the list, and they really are different
+ (i.e. not from an identity-redirect). After adding the recipient,
update the errors address in the recipients list. */
- if (i >= recipients_count && t < recipients_count)
+ if ( i >= recipients_count && t < recipients_count
+ && Ustrcmp(otaddr->address, otaddr->parent->address) != 0)
{
DEBUG(D_deliver) debug_printf("one_time: adding %s in place of %s\n",
otaddr->address, otaddr->parent->address);
receive_add_recipient(otaddr->address, t);
- recipients_list[recipients_count-1].errors_to = otaddr->p.errors_address;
+ recipients_list[recipients_count-1].errors_to = otaddr->prop.errors_address;
tree_add_nonrecipient(otaddr->parent->address);
update_spool = TRUE;
}
this deferred address or, if there is none, the sender address, is on the
list of recipients for a warning message. */
- if (sender_address[0] != 0)
+ if (sender_address[0])
{
- if (addr->p.errors_address == NULL)
- {
- if (Ustrstr(recipients, sender_address) == NULL)
- recipients = string_sprintf("%s%s%s", recipients,
- (recipients[0] == 0)? "" : ",", sender_address);
- }
- else
- {
- if (Ustrstr(recipients, addr->p.errors_address) == NULL)
- recipients = string_sprintf("%s%s%s", recipients,
- (recipients[0] == 0)? "" : ",", addr->p.errors_address);
- }
+ const uschar * s = addr->prop.errors_address;
+ if (!s) s = sender_address;
+ if (Ustrstr(recipients, s) == NULL)
+ recipients = string_sprintf("%s%s%s", recipients,
+ recipients[0] ? "," : "", s);
}
}
is not sent. Another attempt will be made at the next delivery attempt (if
it also defers). */
- if ( !queue_2stage
- && delivery_attempted
- && ( ((addr_defer->dsn_flags & rf_dsnflags) == 0)
- || (addr_defer->dsn_flags & rf_notify_delay) == rf_notify_delay
+ if ( !f.queue_2stage
+ && want_warning_msg
+ && ( !(addr_defer->dsn_flags & rf_dsnflags)
+ || addr_defer->dsn_flags & rf_notify_delay
)
&& delay_warning[1] > 0
- && sender_address[0] != 0
- && ( delay_warning_condition == NULL
- || expand_check_condition(delay_warning_condition,
- US"delay_warning", US"option")
- )
- )
- {
- int count;
- int show_time;
- int queue_time = time(NULL) - received_time;
-
- /* When running in the test harness, there's an option that allows us to
- fudge this time so as to get repeatability of the tests. Take the first
- time off the list. In queue runs, the list pointer gets updated in the
- calling process. */
-
- if (running_in_test_harness && fudged_queue_times[0] != 0)
- {
- int qt = readconf_readtime(fudged_queue_times, '/', FALSE);
- if (qt >= 0)
- {
- DEBUG(D_deliver) debug_printf("fudged queue_times = %s\n",
- fudged_queue_times);
- queue_time = qt;
- }
- }
-
- /* See how many warnings we should have sent by now */
-
- for (count = 0; count < delay_warning[1]; count++)
- if (queue_time < delay_warning[count+2]) break;
-
- show_time = delay_warning[count+1];
-
- if (count >= delay_warning[1])
- {
- int extra;
- int last_gap = show_time;
- if (count > 1) last_gap -= delay_warning[count];
- extra = (queue_time - delay_warning[count+1])/last_gap;
- show_time += last_gap * extra;
- count += extra;
- }
-
- DEBUG(D_deliver)
- {
- debug_printf("time on queue = %s\n", readconf_printtime(queue_time));
- debug_printf("warning counts: required %d done %d\n", count,
- warning_count);
- }
-
- /* We have computed the number of warnings there should have been by now.
- If there haven't been enough, send one, and up the count to what it should
- have been. */
-
- if (warning_count < count)
+ && sender_address[0] != 0)
+ {
+ GET_OPTION("delay_warning_condition");
+ if ( ( !delay_warning_condition
+ || expand_check_condition(delay_warning_condition,
+ US"delay_warning", US"option")
+ )
+ )
{
- header_line *h;
- int fd;
- pid_t pid = child_open_exim(&fd);
-
- if (pid > 0)
- {
- uschar *wmf_text;
- FILE *wmf = NULL;
- FILE *f = fdopen(fd, "wb");
- uschar * bound;
-
- if (warn_message_file)
- {
- wmf = Ufopen(warn_message_file, "rb");
- if (wmf == NULL)
- log_write(0, LOG_MAIN|LOG_PANIC, "Failed to open %s for warning "
- "message texts: %s", warn_message_file, strerror(errno));
- }
-
- warnmsg_recipients = recipients;
- warnmsg_delay = (queue_time < 120*60)?
- string_sprintf("%d minutes", show_time/60):
- string_sprintf("%d hours", show_time/3600);
-
- if (errors_reply_to)
- fprintf(f, "Reply-To: %s\n", errors_reply_to);
- fprintf(f, "Auto-Submitted: auto-replied\n");
- moan_write_from(f);
- fprintf(f, "To: %s\n", recipients);
-
- /* generated boundary string and output MIME-Headers */
- bound = string_sprintf(TIME_T_FMT "-eximdsn-%d", time(NULL), rand());
-
- fprintf(f, "Content-Type: multipart/report;"
- " report-type=delivery-status; boundary=%s\n"
- "MIME-Version: 1.0\n",
- bound);
+ int count;
+ int show_time;
+ int queue_time = time(NULL) - received_time.tv_sec;
- if ((wmf_text = next_emf(wmf, US"header")))
- fprintf(f, "%s\n", wmf_text);
- else
- fprintf(f, "Subject: Warning: message %s delayed %s\n\n",
- message_id, warnmsg_delay);
-
- /* output human readable part as text/plain section */
- fprintf(f, "--%s\n"
- "Content-type: text/plain; charset=us-ascii\n\n",
- bound);
-
- if ((wmf_text = next_emf(wmf, US"intro")))
- fprintf(f, "%s", CS wmf_text);
- else
- {
- fprintf(f,
-"This message was created automatically by mail delivery software.\n");
-
- if (Ustrcmp(recipients, sender_address) == 0)
- fprintf(f,
-"A message that you sent has not yet been delivered to one or more of its\n"
-"recipients after more than ");
+ queue_time = test_harness_fudged_queue_time(queue_time);
- else
- fprintf(f,
-"A message sent by\n\n <%s>\n\n"
-"has not yet been delivered to one or more of its recipients after more than \n",
- sender_address);
-
- fprintf(f, "%s on the queue on %s.\n\n"
- "The message identifier is: %s\n",
- warnmsg_delay, primary_hostname, message_id);
-
- for (h = header_list; h != NULL; h = h->next)
- if (strncmpic(h->text, US"Subject:", 8) == 0)
- fprintf(f, "The subject of the message is: %s", h->text + 9);
- else if (strncmpic(h->text, US"Date:", 5) == 0)
- fprintf(f, "The date of the message is: %s", h->text + 6);
- fputc('\n', f);
-
- fprintf(f, "The address%s to which the message has not yet been "
- "delivered %s:\n",
- !addr_defer->next ? "" : "es",
- !addr_defer->next ? "is": "are");
- }
+ /* See how many warnings we should have sent by now */
- /* List the addresses, with error information if allowed */
+ for (count = 0; count < delay_warning[1]; count++)
+ if (queue_time < delay_warning[count+2]) break;
- /* store addr_defer for machine readable part */
- address_item *addr_dsndefer = addr_defer;
- fputc('\n', f);
- while (addr_defer)
- {
- address_item *addr = addr_defer;
- addr_defer = addr->next;
- if (print_address_information(addr, f, US" ", US"\n ", US""))
- print_address_error(addr, f, US"Delay reason: ");
- fputc('\n', f);
- }
- fputc('\n', f);
+ show_time = delay_warning[count+1];
- /* Final text */
+ if (count >= delay_warning[1])
+ {
+ int extra;
+ int last_gap = show_time;
+ if (count > 1) last_gap -= delay_warning[count];
+ extra = (queue_time - delay_warning[count+1])/last_gap;
+ show_time += last_gap * extra;
+ count += extra;
+ }
- if (wmf)
- {
- if ((wmf_text = next_emf(wmf, US"final")))
- fprintf(f, "%s", CS wmf_text);
- (void)fclose(wmf);
- }
- else
- {
- fprintf(f,
-"No action is required on your part. Delivery attempts will continue for\n"
-"some time, and this warning may be repeated at intervals if the message\n"
-"remains undelivered. Eventually the mail delivery software will give up,\n"
-"and when that happens, the message will be returned to you.\n");
- }
+ DEBUG(D_deliver)
+ {
+ debug_printf("time on queue = %s id %s addr %s\n",
+ readconf_printtime(queue_time), message_id, addr_defer->address);
+ debug_printf("warning counts: required %d done %d\n", count,
+ warning_count);
+ }
- /* output machine readable part */
- fprintf(f, "\n--%s\n"
- "Content-type: message/delivery-status\n\n"
- "Reporting-MTA: dns; %s\n",
- bound,
- smtp_active_hostname);
-
+ /* We have computed the number of warnings there should have been by now.
+ If there haven't been enough, send one, and up the count to what it should
+ have been. */
- if (dsn_envid)
+ if (warning_count < count)
+ if (send_warning_message(recipients, queue_time, show_time))
{
- /* must be decoded from xtext: see RFC 3461:6.3a */
- uschar *xdec_envid;
- if (auth_xtextdecode(dsn_envid, &xdec_envid) > 0)
- fprintf(f,"Original-Envelope-ID: %s\n", dsn_envid);
- else
- fprintf(f,"X-Original-Envelope-ID: error decoding xtext formated ENVID\n");
- }
- fputc('\n', f);
-
- while (addr_dsndefer)
- {
- if (addr_dsndefer->dsn_orcpt)
- fprintf(f,"Original-Recipient: %s\n", addr_dsndefer->dsn_orcpt);
-
- fprintf(f,"Action: delayed\n");
- fprintf(f,"Final-Recipient: rfc822;%s\n", addr_dsndefer->address);
- fprintf(f,"Status: 4.0.0\n");
- if (addr_dsndefer->host_used && addr_dsndefer->host_used->name)
- {
- fprintf(f,"Remote-MTA: dns; %s\n",
- addr_dsndefer->host_used->name);
- print_dsn_diagnostic_code(addr_dsndefer, f);
- }
- addr_dsndefer = addr_dsndefer->next;
- }
-
- fprintf(f, "\n--%s\n"
- "Content-type: text/rfc822-headers\n\n",
- bound);
-
- fflush(f);
- /* header only as required by RFC. only failure DSN needs to honor RET=FULL */
- int topt = topt_add_return_path | topt_no_body;
- transport_filter_argv = NULL; /* Just in case */
- return_path = sender_address; /* In case not previously set */
- /* Write the original email out */
- transport_write_message(NULL, fileno(f), topt, 0, NULL, NULL, NULL, NULL, NULL, 0);
- fflush(f);
-
- fprintf(f,"\n--%s--\n", bound);
-
- fflush(f);
-
- /* Close and wait for child process to complete, without a timeout.
- If there's an error, don't update the count. */
-
- (void)fclose(f);
- if (child_close(pid, 0) == 0)
- {
- warning_count = count;
- update_spool = TRUE; /* Ensure spool rewritten */
- }
- }
+ warning_count = count;
+ update_spool = TRUE; /* Ensure spool rewritten */
+ }
}
}
/* If this was a first delivery attempt, unset the first time flag, and
ensure that the spool gets updated. */
- if (deliver_firsttime)
+ if (f.deliver_firsttime && !f.queue_2stage)
{
- deliver_firsttime = FALSE;
+ f.deliver_firsttime = FALSE;
update_spool = TRUE;
}
For the "tell" message, we turn \n back into newline. Also, insert a newline
near the start instead of the ": " string. */
- if (deliver_freeze)
+ if (f.deliver_freeze)
{
- if (freeze_tell != NULL && freeze_tell[0] != 0 && !local_error_message)
+ if (freeze_tell && *freeze_tell && !f.local_error_message)
{
- uschar *s = string_copy(frozen_info);
- uschar *ss = Ustrstr(s, " by the system filter: ");
+ uschar * s = string_copy(frozen_info);
+ uschar * ss = Ustrstr(s, " by the system filter: ");
- if (ss != NULL)
+ if (ss)
{
ss[21] = '.';
ss[22] = '\n';
}
- ss = s;
- while (*ss != 0)
- {
+ for (ss = s; *ss; )
if (*ss == '\\' && ss[1] == 'n')
- {
- *ss++ = ' ';
- *ss++ = '\n';
- }
- else ss++;
- }
+ { *ss++ = ' '; *ss++ = '\n'; }
+ else
+ ss++;
+
moan_tell_someone(freeze_tell, addr_defer, US"Message frozen",
"Message %s has been frozen%s.\nThe sender is <%s>.\n", message_id,
s, sender_address);
DEBUG(D_deliver)
debug_printf("delivery deferred: update_spool=%d header_rewritten=%d\n",
- update_spool, header_rewritten);
+ update_spool, f.header_rewritten);
- if (update_spool || header_rewritten)
+ if (update_spool || f.header_rewritten)
/* Panic-dies on error */
(void)spool_write_header(message_id, SW_DELIVERING, NULL);
}
if (remove_journal)
{
- sprintf(CS spoolname, "%s/input/%s/%s-J", spool_directory, message_subdir, id);
- if (Uunlink(spoolname) < 0 && errno != ENOENT)
- log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to unlink %s: %s", spoolname,
+ uschar * fname = spool_fname(US"input", message_subdir, id, US"-J");
+
+ if (Uunlink(fname) < 0 && errno != ENOENT)
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "failed to unlink %s: %s", fname,
strerror(errno));
- /* Move the message off the spool if reqested */
+ /* Move the message off the spool if requested */
#ifdef SUPPORT_MOVE_FROZEN_MESSAGES
- if (deliver_freeze && move_frozen_messages)
+ if (f.deliver_freeze && move_frozen_messages)
(void)spool_move_message(id, message_subdir, US"", US"F");
#endif
}
(void)close(deliver_datafile);
deliver_datafile = -1;
DEBUG(D_deliver) debug_printf("end delivery of %s\n", id);
+#ifdef MEASURE_TIMING
+report_time_since(×tamp_startup, US"delivery end"); /* testcase 0005 */
+#endif
+
+/* If the transport suggested another message to deliver, go round again. */
+
+if (final_yield == DELIVER_ATTEMPTED_NORMAL && *continue_next_id)
+ {
+ addr_defer = addr_failed = addr_succeed = NULL;
+ tree_duplicates = NULL; /* discard dups info from old message */
+ id = string_copyn(continue_next_id, MESSAGE_ID_LENGTH);
+ continue_next_id[0] = '\0';
+ goto CONTINUED_ID;
+ }
/* It is unlikely that there will be any cached resources, since they are
released after routing, and in the delivery subprocesses. However, it's
return final_yield;
}
+
+
+void
+tcp_init(void)
+{
+#ifdef EXIM_TFO_PROBE
+tfo_probe();
+#else
+f.tcp_fastopen_ok = TRUE;
+#endif
+}
+
+
+
+/* Called from a commandline, or from the daemon, to do a delivery.
+We need to regain privs; do this by exec of the exim binary. */
+
+void
+delivery_re_exec(int exec_type)
+{
+uschar * where;
+
+if (cutthrough.cctx.sock >= 0 && cutthrough.callout_hold_only)
+ {
+ int channel_fd = cutthrough.cctx.sock;
+
+ smtp_peer_options = cutthrough.peer_options;
+ continue_sequence = 0;
+
+#ifndef DISABLE_TLS
+ if (cutthrough.is_tls)
+ {
+ int pfd[2], pid;
+
+ smtp_peer_options |= OPTION_TLS;
+ sending_ip_address = cutthrough.snd_ip;
+ sending_port = cutthrough.snd_port;
+
+ where = US"socketpair";
+ if (socketpair(AF_UNIX, SOCK_STREAM, 0, pfd) != 0)
+ goto fail;
+
+ where = US"fork";
+ testharness_pause_ms(150);
+ if ((pid = exim_fork(US"tls-proxy-interproc")) < 0)
+ goto fail;
+
+ if (pid == 0) /* child: will fork again to totally disconnect */
+ {
+ smtp_proxy_tls(cutthrough.cctx.tls_ctx, big_buffer, big_buffer_size,
+ pfd, 5*60, cutthrough.host.name);
+ /* does not return */
+ }
+
+ close(pfd[0]);
+ waitpid(pid, NULL, 0);
+ (void) close(channel_fd); /* release the client socket */
+ channel_fd = pfd[1];
+ }
+#endif
+
+ transport_do_pass_socket(cutthrough.transport, cutthrough.host.name,
+ cutthrough.host.address, message_id, channel_fd);
+ }
+else
+ {
+ cancel_cutthrough_connection(TRUE, US"non-continued delivery");
+ (void) child_exec_exim(exec_type, FALSE, NULL, FALSE, 2, US"-Mc", message_id);
+ }
+return; /* compiler quietening; control does not reach here. */
+
+#ifndef DISABLE_TLS
+fail:
+ log_write(0,
+ LOG_MAIN | (exec_type == CEE_EXEC_EXIT ? LOG_PANIC : LOG_PANIC_DIE),
+ "delivery re-exec %s failed: %s", where, strerror(errno));
+
+ /* Get here if exec_type == CEE_EXEC_EXIT.
+ Note: this must be _exit(), not exit(). */
+
+ _exit(EX_EXECFAILED);
+#endif
+}
+
/* vi: aw ai sw=2
*/
/* End of deliver.c */
git://git.exim.org / exim.git / blobdiff