+
. /////////////////////////////////////////////////////////////////////////////
. This is the primary source of the Exim Manual. It is an xfpt document that is
. converted into DocBook XML for subsequent conversion into printable and online
. Update the Copyright year (only) when changing content.
. /////////////////////////////////////////////////////////////////////////////
-.set previousversion "4.96"
+.set previousversion "4.97"
.include ./local_params
.set ACL "access control lists (ACLs)"
.set drivernamemax "64"
.macro copyyear
-2022
+2023
.endmacro
. /////////////////////////////////////////////////////////////////////////////
. --- table with four columns. For cases when the option name is given with
. --- a space, so that it can be split, a fifth argument is used for the
. --- index entry.
+. --- Also one for multiple option def headings be grouped in a single
+. --- table (but without the split capability).
+
+.macro otable
+.itable all 0 0 4 8* left 6* center 6* center 6* right
+.endmacro
+
+.macro orow
+.row "&%$1%&" "Use: &'$2'&" "Type: &'$3'&" "Default: &'$4'&"
+.endmacro
.macro option
.arg 5
.arg -5
.oindex "&%$1%&"
.endarg
-.itable all 0 0 4 8* left 6* center 6* center 6* right
-.row "&%$1%&" "Use: &'$2'&" "Type: &'$3'&" "Default: &'$4'&"
+.otable
+.orow "$1" "$2" "$3" "$4"
+.endtable
+.endmacro
+
+.macro options
+.eacharg
+.oindex "&%$+1%&"
+.endeach 4
+.otable
+.eacharg
+.orow "$+1" "$+2" "$+3" "$+4"
+.endeach 4
.endtable
.endmacro
The following Exim mailing lists exist:
.table2 140pt
-.row &'exim-announce@exim.org'& "Moderated, low volume announcements list"
-.row &'exim-users@exim.org'& "General discussion list"
-.row &'exim-dev@exim.org'& "Discussion of bugs, enhancements, etc."
-.row &'exim-cvs@exim.org'& "Automated commit messages from the VCS"
+.row &'exim-announce@lists.exim.org'& "Moderated, low volume announcements list"
+.row &'exim-users@lists.exim.org'& "General discussion list"
+.row &'exim-users-de@lists.exim.org'& "General discussion list in German language"
+.row &'exim-dev@lists.exim.org'& "Discussion of bugs, enhancements, etc."
+.row &'exim-cvs@lists.exim.org'& "Automated commit messages from the VCS"
.endtable
You can subscribe to these lists, change your existing subscriptions, and view
.cindex "base36"
.cindex "Darwin"
.cindex "Cygwin"
-Every message handled by Exim is given a &'message id'& which is sixteen
+.cindex "exim_msgdate"
+Every message handled by Exim is given a &'message id'& which is 23
characters long. It is divided into three parts, separated by hyphens, for
-example &`16VDhn-0001bo-D3`&. Each part is a sequence of letters and digits,
+example &`16VDhn-000000001bo-D342`&. Each part is a sequence of letters and digits,
normally encoding numbers in base 62. However, in the Darwin operating
system (Mac OS X) and when Exim is compiled to run under Cygwin, base 36
(avoiding the use of lower case letters) is used instead, because the message
contains the number of seconds since the start of the epoch (the normal Unix
way of representing the date and time of day).
.next
-After the first hyphen, the next six characters are the id of the process that
-received the message.
+After the first hyphen, the next
+eleven
+characters are the id of the process that received the message.
.next
-There are two different possibilities for the final two characters:
+There are two different possibilities for the final four characters:
.olist
.oindex "&%localhost_number%&"
If &%localhost_number%& is not set, this value is the fractional part of the
-time of reception, normally in units of 1/2000 of a second, but for systems
+time of reception, normally in units of
+microseconds.
+but for systems
that must use base 36 instead of base 62 (because of case-insensitive file
-systems), the units are 1/1000 of a second.
+systems), the units are
+2 us.
.next
-If &%localhost_number%& is set, it is multiplied by 200 (100) and added to
-the fractional part of the time, which in this case is in units of 1/200
-(1/100) of a second.
+If &%localhost_number%& is set, it is multiplied by
+500000 (250000) and added to
+the fractional part of the time, which in this case is in units of 2 us (4 us).
.endlist
.endlist
pid, it is guaranteed that the time will be different. In most cases, the clock
will already have ticked while the message was being received.
+The exim_msgdate utility (see section &<<SECTexim_msgdate>>&) can be
+used to display the date, and optionally the process id, of an Exim
+Message ID.
+
.section "Receiving mail" "SECID13"
.cindex "receiving mail"
referenced from the configuration (for example, alias files) are changed,
because these are reread each time they are used.
+Either a SIGTERM or a SIGINT signal should be used to cause the daemon
+to cleanly shut down.
+Subprocesses handling recceiving or delivering messages,
+or for scanning the queue,
+will not be affected by the termination of the daemon process.
+
.cmdopt -bdf
This option has the same effect as &%-bd%& except that it never disconnects
from the controlling terminal, even when no debugging is specified.
Because macros in the config file are often used for secrets, those are only
available to admin users.
-.new
The word &"set"& at the start of a line, followed by a single space,
is recognised specially as defining a value for a variable.
The syntax is otherwise the same as the ACL modifier &"set ="&.
-.wen
.cmdopt -bem <&'filename'&>
.cindex "testing" "string expansion"
&%queue_list_requires_admin%& is set false.
+.cmdopt -bpi
+.cindex queue "list of message IDs"
+This option operates like &%-bp%&, but only outputs message ids
+(one per line).
+
+
.cmdopt -bpr
This option operates like &%-bp%&, but the output is not sorted into
chronological order of message arrival. This can speed it up when there are
.cmdopt -bpra
This option is a combination of &%-bpr%& and &%-bpa%&.
+.cmdopt -bpri
+This option is a combination of &%-bpr%& and &%-bpi%&.
+
.cmdopt -bpru
This option is a combination of &%-bpr%& and &%-bpu%&.
This option requests Exim to give up trying to deliver the listed messages,
including any that are frozen. However, if any of the messages are active,
their status is not altered. For non-bounce messages, a delivery error message
-is sent to the sender, containing the text &"cancelled by administrator"&.
+is sent to the sender.
Bounce messages are just discarded. This option can be used only by an admin
user.
given.
Normally the daemon creates this socket, unless a &%-oX%& and &*no*& &%-oP%&
option is also present.
-If this option is given then the socket will not be created. This could be
-required if the system is running multiple daemons.
+If this option is given then the socket will not be created. This is required
+if the system is running multiple daemons, in which case it should
+be used on all.
+The features supported by the socket will not be available in such cases.
The socket is currently used for
.ilist
fast ramp-up of queue runner processes
.next
+caching compiled regexes
+.next
obtaining a current queue size
.endlist
transports are run.
Performance will be best if the &%queue_run_in_order%& option is false.
-If that is so and the &%queue_fast_ramp%& option is true then
-in the first phase of the run,
+If that is so and
+the &%queue_fast_ramp%& option is true
+and a daemon-notifier socket is available
+then in the first phase of the run,
once a threshold number of messages are routed for a given host,
a delivery process is forked in parallel with the rest of the scan.
.cindex "hints database" "remembering routing"
The hints database that remembers which messages are waiting for specific hosts
-is updated, as if delivery to those hosts had been deferred. After this is
-complete, a second, normal queue scan happens, with routing and delivery taking
-place as normal. Messages that are routed to the same host should mostly be
+is updated, as if delivery to those hosts had been deferred.
+
+After the first queue scan complete,
+a second, normal queue scan is done, with routing and delivery taking
+place as normal.
+Messages that are routed to the same host should mostly be
delivered down a single SMTP
.cindex "SMTP" "passed connection"
.cindex "SMTP" "multiple deliveries"
.cindex "multiple SMTP deliveries"
connection because of the hints that were set up during the first queue scan.
-This option may be useful for hosts that are connected to the Internet
+
+Two-phase queue runs should be used on systems which, even intermittently,
+have a large queue (such as mailing-list operators).
+They may also be useful for hosts that are connected to the Internet
intermittently.
.vitem &%-q[q]i...%&
Such a daemon listens for incoming SMTP calls, and also starts a queue runner
process every 30 minutes.
+.cindex "named queues" "queue runners"
+It is possible to set up runners for multiple named queues within one daemon,
+For example:
+.code
+exim -qGhipri/2m -q10m -qqGmailinglist/1h
+.endd
+
When a daemon is started by &%-q%& with a time value, but without &%-bd%&, no
pid file is written unless one is explicitly requested by the &%-oP%& option.
The &'query-style'& type accepts a generalized database query. No particular
key value is assumed by Exim for query-style lookups. You can use whichever
Exim variables you need to construct the database query.
+
+For the string-expansion kind of lookups, the query is given in the first
+bracketed argument of the &${lookup ...}$& expansion.
+For the list-argument kind of lookup the query is given by the remainder of the
+list item after the first semicolon.
+
.cindex "tainted data" "quoting for lookups"
-If tainted data is used in the query then it should be quuted by
+If tainted data is used in the query then it should be quoted by
using the &*${quote_*&<&'lookup-type'&>&*:*&<&'string'&>&*}*& expansion operator
appropriate for the lookup.
.endlist
in a database file is useless, because the asterisk in a partial matching
subject key is always followed by a dot.
+When the lookup is done from a string-expansion,
+the variables &$1$& and &$2$& contain the wild and non-wild parts of the key
+during the expansion of the replacement text.
+They return to their previous values at the end of the lookup item.
+
.code
${quote_<lookup-type>:<string>}
.endd
-For example, the safest way to write the NIS+ query is
+For example, the way to write the NIS+ query is
.code
[name="${quote_nisplus:$local_part}"]
.endd
+.cindex "tainted data" "in lookups"
+&*All*& tainted data used in a query-style lookup must be quoted
+using a mechanism appropriate for the lookup type.
See chapter &<<CHAPexpand>>& for full coverage of string expansions. The quote
operator can be used for all lookup types, but has no effect for single-key
lookups, since no quoting is ever needed in their key strings.
on the number of entries returned, and no time limit on queries.
When a DN is quoted in the USER= setting for LDAP authentication, Exim
-removes any URL quoting that it may contain before passing it LDAP. Apparently
+removes any URL quoting that it may contain before passing it to the LDAP library.
+Apparently
some libraries do this for themselves, but some do not. Removing the URL
quoting has two advantages:
${lookup pgsql,servers=master/db/name/pw {UPDATE ...} }
.endd
-An older syntax places the servers specification before the query,
+.new
+A now-deprecated syntax places the servers specification before the query,
semicolon separated:
.code
${lookup mysql{servers=master; UPDATE ...} }
.endd
-The new version avoids potential issues with tainted
-arguments in the query, for explicit expansion.
+The new version avoids issues with tainted
+arguments explicitly expanded as part of the query.
+The entire string within the braces becomes tainted,
+including the server sepcification - which is not permissible.
+If the older sytax is used, a warning message will be logged.
+This syntax will be removed in a future release.
+.wen
+
&*Note*&: server specifications in list-style lookups are still problematic.
.oindex &%sqlite_dbfile%&
There are two ways of
specifying the file.
-The first is is by using the &%sqlite_dbfile%& main option.
+The first is by using the &%sqlite_dbfile%& main option.
The second, which allows separate files for each query,
is to use an option appended, comma-separated, to the &"sqlite"&
lookup type word. The option is the word &"file"&, then an equals,
.section "Expansion of lists" "SECTlistexpand"
.cindex "expansion" "of lists"
Each list is expanded as a single string before it is used.
+.cindex "tainted data" tracking
+&*Note*&: As a result, if any componend was tainted then the
+entire result string becomes tainted.
&'Exception: the router headers_remove option, where list-item
splitting is done before string-expansion.'&
below in section &<<SECTexpansionitems>>& onwards. Backslash is used as an
escape character, as described in the following section.
+.cindex "tainted data" tracking
+If any porttion of the result string is tainted, the entire result is.
+
Whether a string is expanded depends upon the context. Usually this is solely
dependent upon the option for which a value is sought; in this documentation,
options for which string expansion is performed are marked with † after
database lookups, and the use of expansion operators such as &%sg%&, &%substr%&
and &%nhash%&.
-.new
When reading lines from the standard input,
macros can be defined and ACL variables can be set.
For example:
set acl_m_myvar = bar
.endd
Such macros and variables can then be used in later input lines.
-.wen
Exim gives up its root privilege when it is called with the &%-be%& option, and
instead runs under the uid and gid it was called with, to prevent users from
.code
add_header = :at_start:${authresults {$primary_hostname}}
.endd
-This is safe even if no authentication results are available.
+This is safe even if no authentication results are available
+and would generally be placed in the DATA ACL.
.vitem "&*${certextract{*&<&'field'&>&*}{*&<&'certificate'&>&*}&&&
After expansion, <&'string'&> is interpreted as a list, colon-separated by
default, but the separator can be changed in the usual way (&<<SECTlistsepchange>>&).
For each item
-in this list, its value is place in &$item$&, and then the condition is
+in this list, its value is placed in &$item$&, and then the condition is
evaluated.
-.new
Any modification of &$value$& by this evaluation is discarded.
-.wen
If the condition is true, &$item$& is added to the output as an
item in a new list; if the condition is false, the item is discarded. The
separator used for the output list is the same as the one used for the
sending the request. Values are &"yes"& (the default) or &"no"&
(preferred, eg. by some webservers).
+.next
+&*sni*&
+Controls the use of Server Name Identification on the connection.
+Any nonempty value will be the SNI sent; TLS will be forced.
+
.next
&*tls*&
Controls the use of TLS on the connection.
This item inserts &"raw"& header lines. It is described with the &%header%&
expansion item in section &<<SECTexpansionitems>>& above.
-.vitem "&*${run <&'options'&> {*&<&'command&~arg&~list'&>&*}{*&<&'string1'&>&*}&&&
+.vitem "&*${run<&'options'&> {*&<&'command&~string'&>&*}{*&<&'string1'&>&*}&&&
{*&<&'string2'&>&*}}*&"
.cindex "expansion" "running a command"
.cindex "&%run%& expansion item"
This item runs an external command, as a subprocess.
-One option is supported after the word &'run'&, comma-separated.
+One option is supported after the word &'run'&, comma-separated
+and without whitespace.
If the option &'preexpand'& is not used,
-the command string is split into individual arguments by spaces
-and then each argument is expanded.
+the command string before expansion is split into individual arguments by spaces
+and then each argument is separately expanded.
Then the command is run
in a separate process, but under the same uid and gid. As in other command
executions from Exim, a shell is not used by default. If the command requires
a careful assessment for security vulnerabilities should be done.
If the option &'preexpand'& is used,
-the command and its arguments are first expanded as one string. The result is
-split apart into individual arguments by spaces, and then the command is run
-as above.
+the command string is first expanded as a whole.
+The expansion result is split apart into individual arguments by spaces,
+and then the command is run as above.
Since the arguments are split by spaces, when there is a variable expansion
which has an empty result, it will cause the situation that the argument will
simply be omitted when the program is actually executed by Exim. If the
.code
${run{/bin/bash -c "/usr/bin/id >/tmp/id"}{yes}{yes}}
.endd
+Note that &$value$& will not persist beyond the reception of a single message.
.vindex "&$runrc$&"
The return code from the command is put in the variable &$runrc$&, and this
+.vitem &*${headerwrap_*&<&'cols'&>&*_*&<&'limit'&>&*:*&<&'string'&>&*}*&
+.cindex header "wrapping operator"
+.cindex expansion "header wrapping"
+This operator line-wraps its argument in a way useful for headers.
+The &'cols'& value gives the column number to wrap after,
+the &'limit'& gives a limit number of result characters to truncate at.
+Either just the &'limit'& and the preceding underbar, or both, can be omitted;
+the defaults are 80 and 998.
+Wrapping will be inserted at a space if possible before the
+column number is reached.
+Whitespace at a chosen wrap point is removed.
+A line-wrap consists of a newline followed by a tab,
+and the tab is counted as 8 columns.
+
+
+
.vitem &*${hex2b64:*&<&'hexstring'&>&*}*&
.cindex "base64 encoding" "conversion from hex"
.cindex "expansion" "hex to base64"
.endlist
Note that negation of &*forany*& means that the condition must be false for all
items for the overall condition to succeed, and negation of &*forall*& means
-that the condition must be false for at least one item. In this example, the
-list separator is changed to a comma:
+that the condition must be false for at least one item.
+
+Example:
.code
-${if forany{<, $recipients}{match{$item}{^user3@}}{yes}{no}}
+${if forany{$recipients_list}{match{$item}{^user3@}}{yes}{no}}
.endd
The value of &$item$& is saved and restored while &%forany%& or &%forall%& is
being processed, to enable these expansion items to be nested.
SRS decode. See SECT &<<SECTSRS>>& for details.
-.vitem &*inlist&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*& &&&
- &*inlisti&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
+.vitem &*inlist&~{*&<&'subject'&>&*}{*&<&'list'&>&*}*& &&&
+ &*inlisti&~{*&<&'subject'&>&*}{*&<&'list'&>&*}*&
.cindex "string" "comparison"
.cindex "list" "iterative conditions"
Both strings are expanded; the second string is treated as a list of simple
Consult section &<<SECThoslispatip>>& for further details of these patterns.
+The variable &$value$& will be set for a successful match and can be
+used in the success clause of an &%if%& expansion item using the condition.
+Any previous &$value$& is restored after the if.
+
.vitem &*match_local_part&~{*&<&'string1'&>&*}{*&<&'string2'&>&*}*&
.cindex "domain list" "in expansion condition"
.cindex "address list" "in expansion condition"
rejections of MAIL and rejections of RCPT.
.tvar &$recipients$&
-This variable contains a list of envelope recipients for a message. A comma and
-a space separate the addresses in the replacement text. However, the variable
-is not generally available, to prevent exposure of Bcc recipients in
-unprivileged users' filter files. You can use &$recipients$& only in these
+.tvar &$recipients_list$&
+These variables both contain the envelope recipients for a message.
+
+The first uses a comma and a space separate the addresses in the replacement text.
+&*Note*&: an address can legitimately contain a comma;
+this variable is not intended for further processing.
+
+The second is a proper Exim list; colon-separated.
+
+However, the variables
+are not generally available, to prevent exposure of Bcc recipients in
+unprivileged users' filter files. You can use either of them only in these
cases:
.olist
.cindex "router" "name"
.cindex "name" "of router"
.vindex "&$router_name$&"
-During the running of a router this variable contains its name.
+During the running of a router, or a transport called,
+this variable contains the router name.
.vitem &$runrc$&
.cindex "return code" "from &%run%& expansion"
single connection is being processed. When a child process terminates, the
daemon decrements its copy of the variable.
+.vitem &$smtp_notquit_reason$&
+.vindex "&$smtp_notquit_reason$&"
+When the not-QUIT ACL is running, this variable is set to a string
+that indicates the reason for the termination of the SMTP connection.
+
.vitem "&$sn0$& &-- &$sn9$&"
These variables are copies of the values of the &$n0$& &-- &$n9$& accumulators
that were current at the end of the system filter file. This allows a system
.row &%dsn_advertise_hosts%& "advertise DSN extensions to these hosts"
.row &%ignore_fromline_hosts%& "allow &""From ""& from these hosts"
.row &%ignore_fromline_local%& "allow &""From ""& from local SMTP"
+.row &%limits_advertise_hosts%& "advertise LIMITS to these hosts"
.row &%pipelining_advertise_hosts%& "advertise pipelining to these hosts"
.row &%pipelining_connect_advertise_hosts%& "advertise pipelining to these hosts"
.row &%prdr_enable%& "advertise PRDR to all hosts"
See section &<<CALLaddparcall>>& for details of how this value is used.
-.option check_log_inodes main integer 100
-See &%check_spool_space%& below.
-
-
-.option check_log_space main integer 10M
+.options check_log_inodes main integer 100 &&&
+ check_log_space main integer 10M
See &%check_spool_space%& below.
.oindex "&%check_rfc2047_length%&"
set false, Exim recognizes encoded words of any length.
-.option check_spool_inodes main integer 100
-See &%check_spool_space%& below.
-
-
-.option check_spool_space main integer 10M
+.options check_spool_inodes main integer 100 &&&
+ check_spool_space main integer 10M
.cindex "checking disk space"
.cindex "disk space, checking"
.cindex "spool directory" "checking space"
listens. See chapter &<<CHAPinterfaces>>& for details of how it is used. For
backward compatibility, &%daemon_smtp_port%& (singular) is a synonym.
-.option daemon_startup_retries main integer 9
+.options daemon_startup_retries main integer 9 &&&
+ daemon_startup_sleep main time 30s
.cindex "daemon startup, retrying"
-This option, along with &%daemon_startup_sleep%&, controls the retrying done by
+These options control the retrying done by
the daemon at startup when it cannot immediately bind a listening socket
(typically because the socket is already in use): &%daemon_startup_retries%&
defines the number of retries after the first failure, and
&%daemon_startup_sleep%& defines the length of time to wait between retries.
-.option daemon_startup_sleep main time 30s
-See &%daemon_startup_retries%&.
-
.option delay_warning main "time list" 24h
.cindex "warning of delay"
.cindex "delay warning, specifying"
See section &<<SECDKIMVFY>>&.
-.option dmarc_forensic_sender main string&!! unset
-.option dmarc_history_file main string unset
-.option dmarc_tld_file main string unset
+.option dmarc_forensic_sender main string&!! unset &&&
+ dmarc_history_file main string unset &&&
+ dmarc_tld_file main string unset
.cindex DMARC "main section options"
These options control DMARC processing.
See section &<<SECDMARC>>& for details.
.code
dns_again_means_nonexist = *.in-addr.arpa
.endd
-This option applies to all DNS lookups that Exim does. It also applies when the
+This option applies to all DNS lookups that Exim does,
+except for TLSA lookups (where knowing about such failures
+is security-relevant).
+It also applies when the
&[gethostbyname()]& or &[getipnodebyname()]& functions give temporary errors,
since these are most likely to be caused by DNS lookup problems. The
&(dnslookup)& router has some options of its own for controlling what happens
.option freeze_tell main "string list, comma separated" unset
.cindex "freezing messages" "sending a message when freezing"
+.cindex "frozen messages" "sending a message when freezing"
On encountering certain errors, or when configured to do so in a system filter,
ACL, or special router, Exim freezes a message. This means that no further
delivery attempts take place until an administrator thaws the message, or the
logging that you require.
-.option gecos_name main string&!! unset
+.options gecos_name main string&!! unset &&&
+ gecos_pattern main string unset
.cindex "HP-UX"
.cindex "&""gecos""& field, parsing"
Some operating systems, notably HP-UX, use the &"gecos"& field in the system
gecos_name = $1
.endd
-.option gecos_pattern main string unset
-See &%gecos_name%& above.
-
.option gnutls_compat_mode main boolean unset
This option controls whether GnuTLS is used in compatibility mode in an Exim
nowadays the ACL specified by &%acl_smtp_connect%& can also reject incoming
connections immediately.
-.new
If the connection is on a TLS-on-connect port then the TCP connection is
just dropped. Otherwise, an SMTP error is sent first.
-.wen
The ability to give an immediate rejection (either by this option or using an
ACL) is provided for use in unusual cases. Many hosts will just try again,
.code
hosts_connection_nolog = :
.endd
-.new
The hosts affected by this option also do not log "no MAIL in SMTP connection"
lines, as may commonly be produced by a monitoring system.
-.wen
.option hosts_require_alpn main "host list&!!" unset
&%timeout_frozen_after%&.
-.option ignore_fromline_hosts main "host list&!!" unset
+.options ignore_fromline_hosts main "host list&!!" unset &&&
+ ignore_fromline_local main boolean false
.cindex "&""From""& line"
.cindex "UUCP" "&""From""& line"
Some broken SMTP clients insist on sending a UUCP-like &"From&~"& line before
&%ignore_fromline_local%& must be set to achieve this effect.
-.option ignore_fromline_local main boolean false
-See &%ignore_fromline_hosts%& above.
.option keep_environment main "string list" unset
.cindex "environment" "values from"
+.new
+.option limits_advertise_hosts main "host list&!!" *
+.cindex LIMITS "suppressing advertising"
+.cindex "ESMTP extensions" LIMITS
+This option can be used to suppress the advertisement of the SMTP
+LIMITS extension (RFC 9422) to specific hosts.
+If permitted, Exim as a servier will advertise in the EHLO response
+the limit for RCPT commands set by the &%recipients_max%& option (if it is set)
+and the limit for MAIL commands set by the &%smtp_accept_max_per_connection%&
+option.
+,wen
+
.option local_from_check main boolean true
.cindex "&'Sender:'& header line" "disabling addition of"
.cindex "&'From:'& header line" "disabling checking of"
-.option local_from_prefix main string unset
+.options local_from_prefix main string unset &&&
+ local_from_suffix main string unset
When Exim checks the &'From:'& header line of locally submitted messages for
matching the login id (see &%local_from_check%& above), it can be configured to
ignore certain prefixes and suffixes in the local part of the address. This is
qualify domain.
-.option local_from_suffix main string unset
-See &%local_from_prefix%& above.
-
-
.option local_interfaces main "string list" "see below"
This option controls which network interfaces are used by the daemon for
listening; they are also used to identify the local host when routing. Chapter
.option localhost_number main string&!! unset
.cindex "host" "locally unique number for"
.cindex "message ids" "with multiple hosts"
+.cindex multiple "systems sharing a spool"
+.cindex "multiple hosts" "sharing a spool"
+.cindex "shared spool directory"
+.cindex "spool directory" sharing
.vindex "&$localhost_number$&"
Exim's message ids are normally unique only within the local host. If
-uniqueness among a set of hosts is required, each host must set a different
+uniqueness among a set of hosts is required
+(eg. because they share a spool directory),
+each host must set a different
value for the &%localhost_number%& option. The string is expanded immediately
after reading the configuration file (so that a number can be computed from the
host name, for example) and the result of the expansion must be a number in the
range 0&--16 (or 0&--10 on operating systems with case-insensitive file
systems). This is available in subsequent string expansions via the variable
-&$localhost_number$&. When &%localhost_number is set%&, the final two
+&$localhost_number$&. When &%localhost_number%& is set, the final four
characters of the message id, instead of just being a fractional part of the
time, are computed from the time and the local host number as described in
section &<<SECTmessiden>>&.
The option is available only if Exim has been built with Oracle support.
-.new
.option panic_coredump main boolean false
This option is rarely needed but can help for some debugging investigations.
If set, when an internal error is detected by Exim which is sufficient
Note that most systems require additional administrative configuration
to permit write a core file for a setuid program, which is Exim's
common installed configuration.
-.wen
.option percent_hack_domains main "domain list&!!" unset
.cindex "&""percent hack""&"
local parts. Exim's default configuration does this.
-.option perl_at_start main boolean false
-.cindex "Perl"
-This option is available only when Exim is built with an embedded Perl
-interpreter. See chapter &<<CHAPperl>>& for details of its use.
-
-
-.option perl_startup main string unset
+.options perl_at_start main boolean false &&&
+ perl_startup main string unset
.cindex "Perl"
-This option is available only when Exim is built with an embedded Perl
-interpreter. See chapter &<<CHAPperl>>& for details of its use.
+These options are available only when Exim is built with an embedded Perl
+interpreter. See chapter &<<CHAPperl>>& for details of their use.
.option perl_taintmode main boolean false
.cindex "Perl"
&%queue_only_load%&, and &%smtp_accept_queue%&.
-.option queue_only_file main string unset
+.option queue_only_file main "string list" unset
.cindex "queueing incoming messages"
.cindex "message" "queueing by file existence"
This option can be set to a colon-separated list of absolute path names, each
option was not set.
-.option recipients_max main integer 50000
+.option recipients_max main integer&!! 50000
.cindex "limit" "number of recipients"
.cindex "recipient" "maximum number"
-If this option is set greater than zero, it specifies the maximum number of
+If the value resulting from expanding this option
+is set greater than zero, it specifies the maximum number of
original recipients for any message. Additional recipients that are generated
by aliasing or forwarding do not count. SMTP messages get a 452 response for
all recipients over the limit; earlier recipients are delivered as normal.
Non-SMTP messages with too many recipients are failed, and no deliveries are
done.
+.new
+For SMTP message the expansion is done after the connection is
+accepted (but before any SMTP conversation) and may depend on
+the IP addresses and port numbers of the connection.
+&*Note*&: If an expansion is used for the option,
+care should be taken that a resonable value results for
+non-SMTP messages.
+.wen
+
.cindex "RCPT" "maximum number of incoming"
&*Note*&: The RFCs specify that an SMTP server should accept at least 100
RCPT commands in a single message.
smtp_banner = $smtp_active_hostname ESMTP Exim \
$version_number $tod_full
.endd
-.new
Failure to expand the string causes a panic error;
a forced fail just closes the connection.
-.wen
If you want to create a
multiline response to the initial SMTP connection, use &"\n"& in the string at
appropriate points, but not at the end. Note that the 220 code is not included
-.option smtp_ratelimit_hosts main "host list&!!" unset
+.options smtp_ratelimit_hosts main "host list&!!" unset &&&
+ smtp_ratelimit_mail main string unset &&&
+ smtp_ratelimit_rcpt main string unset
.cindex "SMTP" "rate limiting"
.cindex "limit" "rate of message arrival"
.cindex "RCPT" "rate limiting"
delays to RCPT commands when more than four occur in a single message.
-.option smtp_ratelimit_mail main string unset
-See &%smtp_ratelimit_hosts%& above.
-
-
-.option smtp_ratelimit_rcpt main string unset
-See &%smtp_ratelimit_hosts%& above.
-
.option smtp_receive_timeout main time&!! 5m
.cindex "timeout" "for SMTP input"
.cindex ALPN "set acceptable names for server"
If this option is set,
the TLS library supports ALPN,
-and the client offers either more than
+and the client offers either more than one
ALPN name or a name which does not match the list,
the TLS connection is declined.
acceptable bound from 1024 to 2048.
-.option tls_eccurve main string&!! &`auto`&
+.option tls_eccurve main string list&!! &`auto`&
.cindex TLS "EC cryptography"
-This option selects a EC curve for use by Exim when used with OpenSSL.
-It has no effect when Exim is used with GnuTLS.
+This option selects EC curves for use by Exim when used with OpenSSL.
+It has no effect when Exim is used with GnuTLS
+(the equivalent can be done using a priority string for the
+&%tls_require_ciphers%& option).
-After expansion it must contain a valid EC curve parameter, such as
-&`prime256v1`&, &`secp384r1`&, or &`P-512`&. Consult your OpenSSL manual
-for valid selections.
+After expansion it must contain
+one or (only for OpenSSL versiona 1.1.1 onwards) more
+EC curve names, such as &`prime256v1`&, &`secp384r1`&, or &`P-521`&.
+Consult your OpenSSL manual for valid curve names.
For OpenSSL versions before (and not including) 1.0.2, the string
&`auto`& selects &`prime256v1`&. For more recent OpenSSL versions
&`auto`& tells the library to choose.
-If the option expands to an empty string, no EC curves will be enabled.
+If the option expands to an empty string, the effect is undefined.
.option tls_ocsp_file main string&!! unset
.cindex "router" "restricting to specific domains"
.vindex "&$domain_data$&"
If this option is set, the router is skipped unless the current domain matches
-the list. If the match is achieved by means of a file lookup, the data that the
-lookup returned for the domain is placed in &$domain_data$& for use in string
+the list.
+The data returned by the list check
+is placed in &$domain_data$& for use in string
expansions of the driver's private options and in the transport.
See section &<<SECTrouprecon>>& for
a list of the order in which preconditions are evaluated.
+A complex example, using a file like:
+.code
+alice@dom1
+bill@dom1
+maggie@dom1
+.endd
+and checking both domain and local_part
+.code
+domains = ${domain:${lookup {$local_part@$domain} lseach,ret=key {/path/to/accountsfile}}}
+local_parts = ${local_part:${lookup {$local_part@$domain} lseach,ret=key {/path/to/accountsfile}}}
+.endd
+
.option driver routers string unset
local_parts = dbm;/usr/local/specials/$domain_data
.endd
.vindex "&$local_part_data$&"
-If the match is achieved by a lookup, the data that the lookup returned
+the data returned by the list check
for the local part is placed in the variable &$local_part_data$& for use in
expansions of the router's private options or in the transport.
You might use this option, for
resent to other recipients.
&*Note:*& If used on a transport handling multiple recipients
-(the smtp transport unless &%rcpt_max%& is 1, the appendfile, pipe or lmtp
+(the smtp transport unless &%max_rcpt%& is 1, the appendfile, pipe or lmtp
transport if &%batch_max%& is greater than 1)
then information about Bcc recipients will be leaked.
Doing so is generally not advised.
When the message is about to be written out, the command specified by
&%transport_filter%& is started up in a separate, parallel process, and
the entire message, including the header lines, is passed to it on its standard
-input (this in fact is done from a third process, to avoid deadlock). The
-command must be specified as an absolute path.
+input (this in fact is done from a third process, to avoid deadlock).
+The command must be specified as an absolute path.
+
+The process run by the command must use its standard input as the message
+data to be transformed, and write the results on its standard output.
The lines of the message that are written to the transport filter are
terminated by newline (&"\n"&). The message is passed to the filter before any
transport_filter = '/bin/cmd${if eq{$host}{a.b.c}{1}{2}}'
.endd
This runs the command &(/bin/cmd1)& if the host name is &'a.b.c'&, and
-&(/bin/cmd2)& otherwise. If double quotes had been used, they would have been
+&(/bin/cmd2)& otherwise.
+
+Option strings in general have any fully-surrounding double quote wrapping
+removed early in parsing (see &<<SECTstrings>>&).
+Then, for this option, quotes protect against whitespace being
+regarded as a separator while splitting into the command argument vector.
+Either double or single quotes can be used here;
+the former interprets backlash-quoted charachters
+and the latter does not.
+
+If double quotes had been used in this example, they would have been
stripped by Exim when it read the option's value. When the value is used, if
the single quotes were missing, the line would be split into two items,
&`/bin/cmd${if`& and &`eq{$host}{a.b.c}{1}{2}`&, and an error would occur when
No part of the resulting command may be tainted.
-.option environment pipe string&!! unset
+.option environment pipe "string list&!!" unset
.cindex "&(pipe)& transport" "environment for command"
.cindex "environment" "&(pipe)& transport"
This option is used to add additional variables to the environment in which the
For testing purposes, this value can be overridden by the &%-oB%& command line
option.
+.new
+.cindex "ESMTP extensions" LIMITS
+If the peer advertises a LIMITS extension with a MAILMAX value,
+and either TLSS is in use or was not advertised,
+that value also constrains the result of this option.
+.wen
+
.option dane_require_tls_ciphers smtp string&!! unset
.cindex "TLS" "requiring specific ciphers for DANE"
Exim can pull out a server name, if there is one, from the response to the
client's SMTP EHLO command.
-The default value of this option:
+For normal STARTTLS use, the default value of this option:
.code
${if and { {match {$host} {.outlook.com\$}} \
{match {$item} {\N^250-([\w.]+)\s\N}} \
} {$1}}
.endd
suffices for one known case.
+
During the expansion of this option the &$item$& variable will have the
server's EHLO response.
+
+.new
+For TLS-on-connect connections we do not have an EHLO
+response to use. Because of this the default value of this option is
+set to a static string for those cases, meaning that resumption will
+always be attempted if permitted by the &%tls_resumption_hosts%& option.
+.wen
+
The result of the option expansion is included in the key used to store and
retrieve the TLS session, for session resumption.
TLS session for any host that matches this list.
&%tls_verify_certificates%& should also be set for the transport.
-.new
The default is &"**"& if DANE is not in use for the connection,
or if DANE-TA us used.
It is empty if DANE-EE is used.
-.wen
.option hosts_require_alpn smtp "host list&!!" unset
.cindex ALPN "require negotiation in client"
string &`IGNOREQUOTA`& is added to RCPT commands, provided that the LMTP server
has advertised support for IGNOREQUOTA in its response to the LHLO command.
-.option max_rcpt smtp integer 100
+.option max_rcpt smtp integer&!! 100
.cindex "RCPT" "maximum number of outgoing"
-This option limits the number of RCPT commands that are sent in a single
-SMTP message transaction. Each set of addresses is treated independently, and
+This option,
+after expansion,
+limits the number of RCPT commands that are sent in a single
+SMTP message transaction.
+A value setting of zero disables the limit.
+
+If a constant is given,
+each set of addresses is treated independently, and
so can cause parallel connections to the same host if &%remote_max_parallel%&
-permits this. A value setting of zero disables the limit.
+permits this.
+
+.new
+.cindex "ESMTP extensions" LIMITS
+If the peer advertises a LIMITS extension with a RCPTMAX value,
+and either TLSS is in use or was not advertised,
+that value also constrains the result of this option
+and no parallel connections will be caused on meeting the RCPTMAX limit.
+.wen
.option message_linelength_limit smtp integer 998
.cindex "line length" limit
This option sets the maximum line length, in bytes, that the transport
will send. Any messages with lines exceeding the given value
+(before a transport filter, if any)
will fail and a failure-DSN ("bounce") message will if possible be returned
to the sender.
The default value is that defined by the SMTP standards.
only messages having the domain used for the DANE TLSA lookup are
sent on the connection.
+.new
+.cindex "ESMTP extensions" LIMITS
+If the peer advertises a LIMITS extension with a RCPTDOMAINMAX value,
+and either TLSS is in use or was not advertised,
+this option is regarded as being false.
+.wen
+
+
.option port smtp string&!! "see below"
.cindex "port" "sending TCP/IP"
.cindex "TCP/IP" "setting outgoing port"
while verifying the server certificate,
checks will be included on the host name
(note that this will generally be the result of a DNS MX lookup)
-versus Subject and Subject-Alternate-Name fields. Wildcard names are permitted
+versus the Subject-Alternate-Name (or, if none, Subject-Name) fields.
+Wildcard names are permitted,
limited to being the initial component of a 3-or-more component FQDN.
There is no equivalent checking on client certificates.
Successful authentication sets up information used by the
&%authresults%& expansion item.
-.new
.cindex authentication "failure event, server"
If an authenticator is run and does not succeed,
an event (see &<<CHAPevents>>&) of type "auth:fail" is raised.
If the event is serviced and a string is returned then the string will be logged
instead of the default log line.
See <<CHAPevents>> for details on events.
-.wen
.section "Testing server authentication" "SECID169"
try again later. If there are any backup hosts available, they are tried in the
usual way.
-.new
.next
.cindex authentication "failure event, client"
If the response to authentication is a permanent error (5&'xx'& code),
will be valid.
If the event is serviced and a string is returned then the string will be logged.
See <<CHAPevents>> for details on events.
-.wen
.next
If the response to authentication is a permanent error (5&'xx'& code), Exim
Note that Dovecot must be configured to use auth-client not auth-userdb.
If you are using Dovecot to authenticate POP/IMAP clients, it might be helpful
to use the same mechanisms for SMTP authentication. This is a server
-authenticator only. There is only one option:
+authenticator only. There is only one non-generic option:
.option server_socket dovecot string unset
dovecot_plain:
driver = dovecot
public_name = PLAIN
+ server_advertise_condition = ${if def:tls_in_cipher}
server_socket = /var/run/dovecot/auth-client
server_set_id = $auth1
server_socket = /var/run/dovecot/auth-client
server_set_id = $auth1
.endd
+
+&*Note*&: plaintext authentication methods such as PLAIN and LOGIN
+should not be advertised on cleartext SMTP connections.
+See the discussion in section &<<SECTplain_TLS>>&.
+
If the SMTP connection is encrypted, or if &$sender_host_address$& is equal to
&$received_ip_address$& (that is, the connection is local), the &"secured"&
option is passed in the Dovecot authentication command. If, for a TLS
(see &<<CHAPTLS>>&).
If an authenticator of this type is configured it is
-run before any SMTP-level communication is done,
+run immediately after a TLS connection being negotiated
+(due to either STARTTLS or TLS-on-connect)
and can authenticate the connection.
-If it does, SMTP authentication is not offered.
+If it does, SMTP authentication is not subsequently offered.
A maximum of one authenticator of this type may be present.
(If an API is found to let OpenSSL be configured in this way,
let the Exim Maintainers know and we'll likely use it).
.next
-With GnuTLS, if an explicit list is used for the &%tls_privatekey%& main option
-main option, it must be ordered to match the &%tls_certificate%& list.
+With GnuTLS, if an explicit list is used for the &%tls_privatekey%& main option,
+it must be ordered to match the &%tls_certificate%& list.
.next
Some other recently added features may only be available in one or the other.
This should be documented with the feature. If the documentation does not
The value &"system"& results in no caching under GnuTLS.
The macro _HAVE_TLS_CA_CACHE will be defined if the suffix for "system"
-is acceptable in configurations for the Exim executavble.
+is acceptable in configurations for the Exim executable.
Caching of the system Certificate Authorities bundle can
-save siginificant time and processing on every TLS connection
+save significant time and processing on every TLS connection
accepted by Exim.
The value &"system"& results in no caching under GnuTLS.
The macro _HAVE_TLS_CA_CACHE will be defined if the suffix for "system"
-is acceptable in configurations for the Exim executavble.
+is acceptable in configurations for the Exim executable.
Caching of the system Certificate Authorities bundle can
-save siginificant time and processing on every TLS connection
+save significant time and processing on every TLS connection
initiated by Exim.
.next
Add TLSA DNS records. These say what the server certificate for a TLS connection should be.
.next
-Offer a server certificate, or certificate chain, in TLS connections which is is anchored by one of the TLSA records.
+Offer a server certificate, or certificate chain, in TLS connections which is anchored by one of the TLSA records.
.endlist
There are no changes to Exim specific to server-side operation of DANE.
the message override the banner message that is otherwise specified by the
&%smtp_banner%& option.
-.new
For tls-on-connect connections, the ACL is run before the TLS connection
is accepted; if the ACL does not accept then the TCP connection is dropped without
any TLS startup attempt and without any SMTP response being transmitted.
-.wen
.subsection "The EHLO/HELO ACL" SECID192
The text in a &%message%& modifier is literal; any quotes are taken as
literals, but because the string is expanded, backslash escapes are processed
-anyway. If the message contains newlines, this gives rise to a multi-line SMTP
+anyway.
+If the message contains newlines, this gives rise to a multi-line SMTP
response.
+A long message line will also be split into multi-line SMTP responses,
+on word boundaries if possible.
.vindex "&$acl_verify_message$&"
While the text is being expanded, the &$acl_verify_message$& variable
.vitem &*control&~=&~fakedefer/*&<&'message'&>
.cindex "fake defer"
.cindex "defer, fake"
+.cindex fakedefer
This control works in exactly the same way as &%fakereject%& (described below)
except that it causes an SMTP 450 response after the message data instead of a
550 response. You must take care when using &%fakedefer%& because it causes the
.vitem &*control&~=&~fakereject/*&<&'message'&>
.cindex "fake rejection"
.cindex "rejection, fake"
+.cindex fakereject
This control is permitted only for the MAIL, RCPT, and DATA ACLs, in other
words, only when an SMTP message is being received. If Exim accepts the
message, instead the final 250 response, a 550 rejection message is sent.
DATA, MIME or DKIM ACLs for a message delivered by cutthrough routing.
More than one header can be removed at the same time by using a colon separated
-list of header names. The header matching is case insensitive. Wildcards are
-not permitted, nor is list expansion performed, so you cannot use hostlists to
+list of header specifiers.
+If a specifier does not start with a circumflex (^)
+then it is treated as a header name.
+The header name matching is case insensitive.
+If it does, then it is treated as a (front-anchored)
+regular expression applied to the whole header.
+
+&*Note*&: The colon terminating a header name will need to be doubled
+if used in an RE, and there can legitimately be whitepace before it.
+
+Example:
+.code
+remove_header = \N^(?i)Authentication-Results\s*::\s*example.org;\N
+.endd
+
+List expansion is not performed, so you cannot use hostlists to
create a list of headers, however both connection and message variable expansion
are performed (&%$acl_c_*%& and &%$acl_m_*%&), illustrated in this example:
.code
warn message = Remove internal headers
remove_header = $acl_c_ihdrs
.endd
-Header names for removal are accumulated during the MAIL, RCPT, and predata ACLs.
+Header specifiers for removal are accumulated during the MAIL, RCPT, and predata ACLs.
Matching header lines are removed from the message before processing the DATA and MIME ACLs.
If multiple header lines match, all are removed.
There is no harm in attempting to remove the same header twice nor in removing
-a non-existent header. Further header lines to be removed may be accumulated
-during the DATA and MIME ACLs, after which they are removed from the message,
-if present. In the case of non-SMTP messages, headers to be removed are
-accumulated during the non-SMTP ACLs, and are removed from the message after
+a non-existent header. Further header specifiers for removal may be accumulated
+during the DATA and MIME ACLs, after which matching headers are removed
+if present. In the case of non-SMTP messages, remove specifiers are
+accumulated during the non-SMTP ACLs, and are acted on after
all the ACLs have run. If a message is rejected after DATA or by the non-SMTP
ACL, there really is no effect because there is no logging of what headers
would have been removed.
(the -D file). The file is open for reading and writing, but updating it is not
recommended. &*Warning*&: You must &'not'& close this file descriptor.
-The descriptor is positioned at character 19 of the file, which is the first
-character of the body itself, because the first 19 characters are the message
-id followed by &`-D`& and a newline. If you rewind the file, you should use the
+The descriptor is positioned at character 26 of the file, which is the first
+character of the body itself, because the first 26 characters (19 characters
+before Exim 4.97) are the message id followed by &`-D`& and a newline.
+If you rewind the file, you should use the
macro SPOOL_DATA_START_OFFSET to reset to the start of the data, just in
case this changes in some future version.
.next
follows:
.ilist
-LF not preceded by CR is treated as a line ending.
-.next
CR is treated as a line ending; if it is immediately followed by LF, the LF
is ignored.
.next
.next
If the first header line received in a message ends with CRLF, a subsequent
bare LF in a header line is treated in the same way as a bare CR in a header
-line.
+line and a bare LF in a body line is replaced with a space.
+.next
+If the first header line received in a message does not end with CRLF, a subsequent
+LF not preceded by CR is treated as a line ending.
.endlist
.display
&`A `& authenticator name (and optional id and sender)
&`C `& SMTP confirmation on delivery
+&`Ci `& connection identifier
&` `& command list for &"no mail in SMTP session"&
&`CV `& certificate verification status
&`D `& duration of &"no mail in SMTP session"&
.section "Reducing or increasing what is logged" "SECTlogselector"
.cindex "log" "selectors"
By setting the &%log_selector%& global option, you can disable some of Exim's
-default logging, or you can request additional logging. The value of
+default logging to the main log, or you can request additional logging. The value of
&%log_selector%& is made up of names preceded by plus or minus characters. For
example:
.code
.irow &`address_rewrite`& "address rewriting"
.irow &`all_parents`& "all parents in => lines"
.irow &`arguments`& "command line arguments"
+.irow &`connection_id`& "connection identifier"
.irow &`connection_reject`& * "connection rejections"
.irow &`delay_delivery`& * "immediate delivery delayed"
.irow &`deliver_time`& "time taken to attempt delivery"
.irow &`delivery_size`& "add &`S=`&&'nnn'& to => lines"
.irow &`dkim`& * "DKIM verified domain on <= lines"
-.irow &`dkim_verbose`& "separate full DKIM verification result line, per signature"
+.irow &`dkim_verbose`& "separate full DKIM verification result line, per signature; DKIM signing"
.irow &`dnslist_defer`& * "defers of DNS list (aka RBL) lookups"
.irow &`dnssec`& "DNSSEC secured lookups"
.irow &`etrn`& * "ETRN commands"
.irow &`host_lookup_failed`& * "as it says"
.irow &`ident_timeout`& "timeout for ident connection"
-.irow &`incoming_interface`& "local interface on <= and => lines"
+.irow &`incoming_interface`& "local interface & port on <= and => lines"
.irow &`incoming_port`& "remote port on <= lines"
.irow &`lost_incoming_connection`& * "as it says (includes timeouts)"
.irow &`millisec`& "millisecond timestamps and RT,QT,DT,D times"
.irow &`tls_peerdn`& "TLS peer DN on <= and => lines"
.irow &`tls_resumption`& "append * to cipher field"
.irow &`tls_sni`& "TLS SNI on <= lines"
-.irow &`unknown_in_list`& "DNS lookup failed in list match"
+.irow &`unknown_in_list`& "lookup failed in list match"
.irow &`all`& "&*all of the above*&"
.endtable
See also the &%slow_lookup_log%& main configuration option,
only way to log such cases is to interpose a script such as &_util/logargs.sh_&
between the caller and Exim.
.next
+.cindex "log" "connection identifier"
+&%connection_identifier%&: An identifier for the accepted connection is added to
+connection start and end lines and to message accept lines.
+The identifier is tagged by Ci=.
+The value is PID-based, so will reset on reboot and will wrap.
+.next
.cindex "log" "connection rejections"
&%connection_reject%&: A log entry is written whenever an incoming SMTP
connection is rejected, for whatever reason.
.cindex log "DKIM verification"
.cindex DKIM "verification logging"
&%dkim_verbose%&: A log entry is written for each attempted DKIM verification.
+.new
+Also, on message delivery lines signing information (domain and selector)
+is added, tagged with DKIM=.
+.wen
.next
.cindex "log" "dnslist defer"
.cindex "DNS list" "logging defer"
.next
.cindex "log" "DNS failure in list"
&%unknown_in_list%&: This setting causes a log entry to be written when the
-result of a list match is failure because a DNS lookup failed.
+result of a list match is failure because a DNS lookup failed, or because
+a bad IP address was in the list.
.endlist
.irow &<<SECTtidydb>>& &'exim_tidydb'& "clean up a hints database"
.irow &<<SECTfixdb>>& &'exim_fixdb'& "patch a hints database"
.irow &<<SECTmailboxmaint>>& &'exim_lock'& "lock a mailbox file"
+.irow &<<SECTexim_msgdate>>& &'exim_msgdate'& "Message Ids for humans (exim_msgdate)"
.endtable
Another utility that might be of use to sites with many MTAs is Tom Kistner's
.next
Limiting the concurrency of specific transports (when &%max_parallel%& is set
in a transport)
+.next
+Recording EHLO-time facilities advertised by hosts
.endlist
.endd
Note that if a command is supplied, it must be entirely contained within the
second argument &-- hence the quotes.
-.ecindex IIDutils
+.section "Message Ids for humans (exim_msgdate)" "SECTexim_msgdate"
+.cindex "exim_msgdate"
+The &'exim_msgdate'& utility is written by Andrew Aitchison and included in the Exim distribution.
+This Perl script converts an Exim Mesage ID back into a human readable form.
+For details of &'exim_msgdate'&'s options, run &'exim_msgdate'& with the &%--help%& option.
+
+Section &<<SECTmessiden>>& (Message identification) describes Exim Mesage IDs.
+.ecindex IIDutils
. ////////////////////////////////////////////////////////////////////////////
. ////////////////////////////////////////////////////////////////////////////
.option dkim_sign_headers smtp string&!! "see below"
If set, this option must expand to a colon-separated
list of header names.
-Headers with these names, or the absence or such a header, will be included
+Headers with these names, or the absence of such a header, will be included
in the message signature.
When unspecified, the header names listed in RFC4871 will be used,
whether or not each header is present in the message.
.option dkim_timestamps smtp integer&!! unset
This option controls the inclusion of timestamp information in the signature.
If not set, no such information will be included.
-Otherwise, must be an unsigned number giving an offset in seconds from the current time
-for the expiry tag
-(eg. 1209600 for two weeks);
-both creation (t=) and expiry (x=) tags will be included.
+.new
+Otherwise, must be an unsigned number giving an offset in seconds from the
+current time for the expiry tag (e.g. 1209600 for two weeks); both creation
+(t=) and expiry (x=) tags will be included unless the offset is 0 (no expiry).
+.wen
RFC 6376 lists these tags as RECOMMENDED.
Verification of DKIM signatures in SMTP incoming email is done for all
messages for which an ACL control &%dkim_disable_verify%& has not been set.
+
.cindex DKIM "selecting signature algorithms"
-Individual classes of signature algorithm can be ignored by changing
+Individual classes of DKIM signature algorithm can be ignored by changing
the main options &%dkim_verify_hashes%& or &%dkim_verify_keytypes%&.
The &%dkim_verify_minimal%& option can be set to cease verification
processing for a message once the first passing signature is found.
of this section can be ignored.
The results of verification are made available to the
-&%acl_smtp_dkim%& ACL, which can examine and modify them.
+&%acl_smtp_dkim%& ACL, which (for complex needs) can examine and modify them.
A missing ACL definition defaults to accept.
By default, the ACL is called once for each
syntactically(!) correct signature in the incoming message.
&%dkim_verify_signers%& (see above).
.vitem &%$dkim_verify_status%&
+So long as a DKIM ACL is defined
+(it need do no more than accept, which is the default),
+after all the DKIM ACL runs have completed, the value becomes a
+colon-separated list of the values after each run.
+The value is maintained for the MIME, PRDR and DATA ACLs.
+
Within the DKIM ACL,
a string describing the general status of the signature. One of
.ilist
set dkim_verify_reason = hash too weak or key too short
.endd
-So long as a DKIM ACL is defined (it need do no more than accept),
-after all the DKIM ACL runs have completed, the value becomes a
-colon-separated list of the values after each run.
-This is maintained for the mime, prdr and data ACLs.
-
.vitem &%$dkim_verify_reason%&
A string giving a little bit more detail when &%$dkim_verify_status%& is either
"fail" or "invalid". One of
.vitem &%dkim_signers%&
ACL condition that checks a colon-separated list of domains or identities
for a match against the domain or identity that the ACL is currently verifying
-(reflected by &%$dkim_cur_signer%&). This is typically used to restrict an ACL
+(reflected by &%$dkim_cur_signer%&).
+This condition is only usable in a DKIM ACL.
+This is typically used to restrict an ACL
verb to a group of domains or identities. For example:
.code
.vitem &%dkim_status%&
ACL condition that checks a colon-separated list of possible DKIM verification
-results against the actual result of verification. This is typically used
+results against the actual result of verification,
+given by &$dkim_verify_status$& if that is non-empty or "none" if empty.
+.new
+This condition may be used in DKIM, MIME, PRDR and DATA ACLs.
+.wen
+
+A basic verification might be:
+.code
+deny !dkim_status = pass:none:invalid
+.endd
+
+A more complex use could be
to restrict an ACL verb to a list of verification outcomes, for example:
.code
The possible status keywords are: 'none','invalid','fail' and 'pass'. Please
see the documentation of the &%$dkim_verify_status%& expansion variable above
for more information of what they mean.
+
+The condition is true if the status
+.new
+(or any of the list of status values)
+.wen
+is any one of the supplied list.
.endlist
.subsection "SRS (Sender Rewriting Scheme)" SECTSRS
.cindex SRS "sender rewriting scheme"
+.cindex VERP "variable envelope return path"
SRS can be used to modify sender addresses when forwarding so that
SPF verification does not object to them.
-It operates by encoding the original envelope sender in a new
+It can also be used to identify a received bounce message as
+likely (or not) having been trigged by a message from the
+local system, and for identifying dead addresses in mailing lists.
+It is one implementation of a VERP (Variable Envelope Return Path) method.
+
+SRS operates by encoding the original envelope sender in a new
sender local part and using a domain run by the forwarding site
as the new domain for the sender. Any DSN message should be returned
to this new sender at the forwarding site, which can extract the
If this value is empty the the expansion result will be empty.
The third argument should be the recipient domain of the message when
it arrived at this system.
+All arguments are expanded before use.
+
+The result of the expansion is the replacement envelope-from (return path)
+to be used.
.endlist
.cindex SRS decoding
To decode an address use this expansion condition:
.vlist
.vitem &*inbound_srs&~{*&<&'local&~part'&>&*}{*&<&'secret'&>&*}*&
-The first argument should be the recipient local prt as is was received.
+The first argument should be the recipient local part as it was received.
The second argument is the site secret.
+Both arguments are expanded before use.
If the messages is not for an SRS-encoded recipient the condition will
-return false. If it is, the condition will return true and the variable
+return false.
+If it is, the condition will return true and the variable
&$srs_recipient$& will be set to the decoded (original) value.
+
+If the second argument is empty then the condition returns true if
+the first argument is in valid SRS formet, else false.
+The variable &$srs_recipient$& is not set for this case.
.endlist
Example usage:
# one, plus the max_rcpt and return_path options
remote_forwarded_smtp:
driver = smtp
- # modify the envelope from, for mails that we forward
+ # single-recipient so that $original_domain is valid
max_rcpt = 1
+ # modify the envelope from, for mails that we forward
return_path = ${srs_encode {SRS_SECRET} {$return_path} {$original_domain}}
.endd
no other use is made of it.
For a tcp:connect event, if the connection is being made to a proxy
-then the address and port variables will be that of the proxy and not
-the target system.
+then the &$host_address$& and &$host_port$& variables
+will be that of the proxy and not the target system.
For tls:cert events, if GnuTLS is in use this will trigger only per
chain element received on the connection.
git://git.exim.org / exim.git / blobdiff