#! /usr/bin/perl -w
-# $Cambridge: exim/test/runtest,v 1.37 2010/06/14 20:30:12 jetmore Exp $
-
###############################################################################
# This is the controlling script for the "new" test suite for Exim. It should #
# be possible to export this suite for running on a wide variety of hosts, in #
# Placed in the Exim CVS: 06 February 2006 #
###############################################################################
+#use strict;
require Cwd;
use Errno;
use FileHandle;
use Socket;
+use Time::Local;
# Start by initializing some global variables
-$testversion = "4.72 (02-Jun-10)";
+$testversion = "4.80 (08-May-12)";
+
+# This gets embedded in the D-H params filename, and the value comes
+# from asking GnuTLS for "normal", but there appears to be no way to
+# use certtool/... to ask what that value currently is. *sigh*
+# We also clamp it because of NSS interop, see addition of tls_dh_max_bits.
+# This value is correct as of GnuTLS 2.12.18 as clamped by tls_dh_max_bits.
+# normal = 2432 tls_dh_max_bits = 2236
+$gnutls_dh_bits_normal = 2236;
$cf = "bin/cf -exact";
$cr = "\r";
$debug = 0;
+$force_continue = 0;
$force_update = 0;
+$log_failed_filename = "failed-summary.log";
$more = "less -XF";
$optargs = "";
$save_output = 0;
$parm_port_d3 = 1227; # Additional for daemon
$parm_port_d4 = 1228; # Additional for daemon
+# Manually set locale
+$ENV{'LC_ALL'} = 'C';
+
###############################################################################
}
+##################################################
+# Any state to be preserved across tests #
+##################################################
+
+my $TEST_STATE = {};
+
##################################################
# Subroutine to tidy up and exit #
# than SIGTERM to stop it outputting "Terminated" to the terminal when not in
# the background.
+if (exists $TEST_STATE->{exim_pid})
+ {
+ $pid = $TEST_STATE->{exim_pid};
+ print "Tidyup: killing wait-mode daemon pid=$pid\n";
+ system("sudo kill -SIGINT $pid");
+ }
+
if (opendir(DIR, "spool"))
{
my(@spools) = sort readdir(DIR);
system("sudo /bin/rm -rf ./spool test-* ./dnszones/*")
if ($rc == 0 && !$save_output);
-system("sudo /bin/rm -rf ./eximdir/*");
+system("sudo /bin/rm -rf ./eximdir/*")
+ if (!$save_output);
+
+print "\nYou were in test $test at the end there.\n\n" if defined $test;
exit $rc if ($rc >= 0);
die "** runtest error: $_[1]\n";
}
}
-# This is used while munging the output from exim_dumpdb. We cheat by assuming
-# that the date always the same, and just return the number of seconds since
-# midnight.
+# This is used while munging the output from exim_dumpdb.
+# May go wrong across DST changes.
sub date_seconds {
my($day,$month,$year,$hour,$min,$sec) =
$_[0] =~ /^(\d\d)-(\w\w\w)-(\d{4})\s(\d\d):(\d\d):(\d\d)/;
-return $hour * 60 * 60 + $min * 60 + $sec;
+my($mon);
+if ($month =~ /Jan/) {$mon = 0;}
+elsif($month =~ /Feb/) {$mon = 1;}
+elsif($month =~ /Mar/) {$mon = 2;}
+elsif($month =~ /Apr/) {$mon = 3;}
+elsif($month =~ /May/) {$mon = 4;}
+elsif($month =~ /Jun/) {$mon = 5;}
+elsif($month =~ /Jul/) {$mon = 6;}
+elsif($month =~ /Aug/) {$mon = 7;}
+elsif($month =~ /Sep/) {$mon = 8;}
+elsif($month =~ /Oct/) {$mon = 9;}
+elsif($month =~ /Nov/) {$mon = 10;}
+elsif($month =~ /Dec/) {$mon = 11;}
+return timelocal($sec,$min,$hour,$day,$mon,$year);
}
sub munge {
my($file) = $_[0];
+my($extra) = $_[1];
my($yield) = 0;
my(@saved) = ();
while(<IN>)
{
RESET_AFTER_EXTRA_LINE_READ:
+ # Custom munges
+ if ($extra)
+ {
+ next if $extra =~ m%^/% && eval $extra;
+ eval $extra if $extra =~ m/^s/;
+ }
+
# Check for "*** truncated ***"
$yield = 1 if /\*\*\* truncated \*\*\*/;
# But convert "name=the.local.host address=127.0.0.1" to use "localhost"
s/name=the\.local\.host address=127\.0\.0\.1/name=localhost address=127.0.0.1/g;
+ # The name of the shell may vary
+ s/\s\Q$parm_shell\E\b/ ENV_SHELL/;
+
# Replace the path to the testsuite directory
s?\Q$parm_cwd\E?TESTSUITE?g;
# Replace the Exim version number (may appear in various places)
- s/Exim \d+\.\d+[\w-]*/Exim x.yz/i;
+ # patchexim should have fixed this for us
+ #s/(Exim) \d+\.\d+[\w_-]*/$1 x.yz/i;
# Replace Exim message ids by a unique series
s/((?:[^\W_]{6}-){2}[^\W_]{2})
# The message for a non-listening FIFO varies
s/:[^:]+: while opening named pipe/: Error: while opening named pipe/;
- # The name of the shell may vary
- s/\s\Q$parm_shell\E\b/ SHELL/;
-
# Debugging output of lists of hosts may have different sort keys
s/sort=\S+/sort=xx/ if /^\S+ (?:\d+\.){3}\d+ mx=\S+ sort=\S+/;
\d{4}-\d\d-\d\d\s\d\d:\d\d:\d\d/Exim statistics from <time> to <time>/x;
+ # ======== TLS certificate algorithms ========
+ # Test machines might have various different TLS library versions supporting
+ # different protocols; can't rely upon TLS 1.2's AES256-GCM-SHA384, so we
+ # treat the standard algorithms the same.
+ # So far, have seen:
+ # TLSv1:AES256-SHA:256
+ # TLSv1.1:AES256-SHA:256
+ # TLSv1.2:AES256-GCM-SHA384:256
+ # TLSv1.2:DHE-RSA-AES256-SHA:256
+ # TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
+ # We also need to handle the ciphersuite without the TLS part present, for
+ # client-ssl's output. We also see some older forced ciphersuites, but
+ # negotiating TLS 1.2 instead of 1.0.
+ # Mail headers (...), log-lines X=..., client-ssl output ...
+ # (and \b doesn't match between ' ' and '(' )
+
+ s/( (?: (?:\b|\s) [\(=] ) | \s )TLSv1\.[12]:/$1TLSv1:/xg;
+ s/\bAES256-GCM-SHA384\b/AES256-SHA/g;
+ s/\bDHE-RSA-AES256-SHA\b/AES256-SHA/g;
+
+ # GnuTLS have seen:
+ # TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256
+ # TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128
+ # TLS1.2:RSA_AES_256_CBC_SHA1:256 (canonical)
+ # TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128
+ #
+ # X=TLS1.2:DHE_RSA_AES_256_CBC_SHA256:256
+ # X=TLS1.2:RSA_AES_256_CBC_SHA1:256
+ # X=TLS1.1:RSA_AES_256_CBC_SHA1:256
+ # X=TLS1.0:DHE_RSA_AES_256_CBC_SHA1:256
+ # and as stand-alone cipher:
+ # ECDHE-RSA-AES256-SHA
+ # DHE-RSA-AES256-SHA256
+ # DHE-RSA-AES256-SHA
+ # picking latter as canonical simply because regex easier that way.
+ s/\bDHE_RSA_AES_128_CBC_SHA1:128/RSA_AES_256_CBC_SHA1:256/g;
+ s/TLS1.[012]:((EC)?DHE_)?RSA_AES_(256|128)_(CBC|GCM)_SHA(1|256|384):(256|128)/TLS1.x:xxxxRSA_AES_256_CBC_SHAnnn:256/g;
+ s/\b(ECDHE-RSA-AES256-SHA|DHE-RSA-AES256-SHA256)\b/AES256-SHA/g;
+
+ # GnuTLS library error message changes
+ s/No certificate was found/The peer did not send any certificate/g;
+#(dodgy test?) s/\(certificate verification failed\): invalid/\(gnutls_handshake\): The peer did not send any certificate./g;
+ s/\(gnutls_priority_set\): No or insufficient priorities were set/\(gnutls_handshake\): Could not negotiate a supported cipher suite/g;
+
+ # (this new one is a generic channel-read error, but the testsuite
+ # only hits it in one place)
+ s/TLS error on connection to \d{1,3}(.\d{1,3}){3} \[\d{1,3}(.\d{1,3}){3}\] \(gnutls_handshake\): Error in the pull function\./a TLS session is required for ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4], but an attempt to start TLS failed/g;
+
+ # (replace old with new, hoping that old only happens in one situation)
+ s/TLS error on connection to \d{1,3}(.\d{1,3}){3} \[\d{1,3}(.\d{1,3}){3}\] \(gnutls_handshake\): A TLS packet with unexpected length was received./a TLS session is required for ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4], but an attempt to start TLS failed/g;
+ s/TLS error on connection from \[127.0.0.1\] \(recv\): A TLS packet with unexpected length was received./TLS error on connection from [127.0.0.1] (recv): The TLS connection was non-properly terminated./g;
+
+ # signature algorithm names
+ s/RSA-SHA1/RSA-SHA/;
+
+
# ======== Caller's login, uid, gid, home, gecos ========
s/\Q$parm_caller_home\E/CALLER_HOME/g; # NOTE: these must be done
s/\buid=$parm_caller_uid\b/uid=CALLER_UID/g;
s/\bgid=$parm_caller_gid\b/gid=CALLER_GID/g;
- s/\bname=$parm_caller_gecos\b/name=CALLER_GECOS/g;
+ s/\bname="?$parm_caller_gecos"?/name=CALLER_GECOS/g;
# When looking at spool files with -Mvh, we will find not only the caller
# login, but also the uid and gid. It seems that $) in some Perls gives all
s/host\s\Q$parm_ipv4\E\s\[\Q$parm_ipv4\E\]/host ipv4.ipv4.ipv4.ipv4 [ipv4.ipv4.ipv4.ipv4]/;
s/host\s\Q$parm_ipv6\E\s\[\Q$parm_ipv6\E\]/host ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6 [ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6]/;
s/\b\Q$parm_ipv4\E\b/ip4.ip4.ip4.ip4/g;
- s/\b\Q$parm_ipv6\E\b/ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6/g;
+ s/(^|\W)\K\Q$parm_ipv6\E/ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6/g;
s/\b\Q$parm_ipv4r\E\b/ip4-reverse/g;
- s/\b\Q$parm_ipv6r\E\b/ip6-reverse/g;
+ s/(^|\W)\K\Q$parm_ipv6r\E/ip6-reverse/g;
s/^(\s+host\s\S+\s+\[\S+\]) +$/$1 /;
# ======== Output from ls ========
# Different operating systems use different spacing on long output
- s/ +/ /g if /^[-rwd]{10} /;
+ #s/ +/ /g if /^[-rwd]{10} /;
+ # (Bug 1226) SUSv3 allows a trailing printable char for modified access method control.
+ # Handle only the Gnu and MacOS space, dot, plus and at-sign. A full [[:graph:]]
+ # unfortunately matches a non-ls linefull of dashes.
+ # Allow the case where we've already picked out the file protection bits.
+ if (s/^([-d](?:[-r][-w][-SsTtx]){3})[.+@]?( +|$)/$1$2/) {
+ s/ +/ /g;
+ }
# ======== Message sizes =========
s/(TLS error on connection (?:from|to) .*? \(SSL_\w+\): error:)(.*)/$1 <<detail omitted>>/;
-
# ======== Maildir things ========
# timestamp output in maildir processing
s/(timestamp=|\(timestamp_only\): )\d+/$1ddddddd/g;
s/^\d\d\d(?=[PFS*])/ddd/;
+ # ========= Exim lookups ==================
+ # Lookups have a char which depends on the number of lookup types compiled in,
+ # in stderr output. Replace with a "0". Recognising this while avoiding
+ # other output is fragile; perhaps the debug output should be revised instead.
+ s%(?<!sqlite)(?<!lsearch\*@)(?<!lsearch\*)(?<!lsearch)[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
+
+ # ==========================================================
+ # MIME boundaries in RFC3461 DSN messages
+ s/\d{8,10}-eximdsn-\d{8,10}/NNNNNNNNNN-eximdsn-MMMMMMMMMM/;
+
# ==========================================================
# Some munging is specific to the specific file types
next;
}
}
+
+ # openssl version variances
+ next if /^SSL info: unknown state/;
+ next if /^SSL info: SSLv2\/v3 write client hello A/;
+
}
# ======== stderr ========
# drop lookups
next if /^Lookups \(built-in\):/;
+ next if /^Loading lookup modules from/;
+ next if /^Loaded \d+ lookup modules/;
next if /^Total \d+ lookups/;
+ # drop compiler information
+ next if /^Compiler:/;
+
# and the ugly bit
# different libraries will have different numbers (possibly 0) of follow-up
# lines, indenting with more data
# be the case
next if /^changing group to \d+ failed: Operation not permitted/;
+ # We might not keep this check; rather than change all the tests, just
+ # ignore it as long as it succeeds; then we only need to change the
+ # TLS tests where tls_require_ciphers has been set.
+ if (m{^changed uid/gid: calling tls_validate_require_cipher}) {
+ my $discard = <IN>;
+ next;
+ }
+ next if /^tls_validate_require_cipher child \d+ ended: status=0x0/;
+
# We invoke Exim with -D, so we hit this new messag as of Exim 4.73:
- next if /^macros_trusted overriden to true by whitelisting/;
+ next if /^macros_trusted overridden to true by whitelisting/;
# We have to omit the localhost ::1 address so that all is well in
# the IPv4-only case.
# Arguments: [0] the prompt string
# [1] if there is a U in the prompt and $force_update is true
+# [2] if there is a C in the prompt and $force_continue is true
# Returns: nothing (it sets $_)
sub interact{
print $_[0];
if ($_[1]) { $_ = "u"; print "... update forced\n"; }
+ elsif ($_[2]) { $_ = "c"; print "... continue forced\n"; }
else { $_ = <T>; }
}
+##################################################
+# Subroutine to log in force_continue mode #
+##################################################
+
+# In force_continue mode, we just want a terse output to a statically
+# named logfile. If multiple files in same batch (stdout, stderr, etc)
+# all have mismatches, it will log multiple times.
+#
+# Arguments: [0] the logfile to append to
+# [1] the testno that failed
+# Returns: nothing
+
+
+
+sub log_failure {
+ my $logfile = shift();
+ my $testno = shift();
+ my $detail = shift() || '';
+ if ( open(my $fh, ">>", $logfile) ) {
+ print $fh "Test $testno $detail failed\n";
+ close $fh;
+ }
+}
+
+
##################################################
# Subroutine to compare one output file #
# [2] where to put the munged copy
# [3] the name of the saved file
# [4] TRUE if this is a log file whose deliveries must be sorted
+# [5] optionally, a custom munge command
#
# Returns: 0 comparison succeeded or differences to be ignored
-# 1 comparison failed; files were updated (=> re-compare)
+# 1 comparison failed; files may have been updated (=> re-compare)
#
# Does not return if the user replies "Q" to a prompt.
sub check_file{
-my($rf,$rsf,$mf,$sf,$sortfile) = @_;
+my($rf,$rsf,$mf,$sf,$sortfile,$extra) = @_;
# If there is no saved file, the raw files must either not exist, or be
# empty. The test ! -s is TRUE if the file does not exist or is empty.
for (;;)
{
print "Continue, Show, or Quit? [Q] ";
- $_ = <T>;
+ $_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, $rf) if (/^c$/i && $force_continue);
return 0 if /^c$/i;
last if (/^s$/);
}
print "\n";
for (;;)
{
- interact("Continue, Update & retry, Quit? [Q] ", $force_update);
+ interact("Continue, Update & retry, Quit? [Q] ", $force_update, $force_continue);
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, $rsf) if (/^c$/i && $force_continue);
return 0 if /^c$/i;
last if (/^u$/i);
}
# data that does exist.
open(MUNGED, ">$mf") || tests_exit(-1, "Failed to open $mf: $!");
-my($truncated) = munge($rf) if -e $rf;
+my($truncated) = munge($rf, $extra) if -e $rf;
if (defined $rsf && -e $rsf)
{
print MUNGED "\n******** SERVER ********\n";
- $truncated |= munge($rsf);
+ $truncated |= munge($rsf, $extra);
}
close(MUNGED);
print "\n";
for (;;)
{
- interact("Continue, Update & retry, Quit? [Q] ", $force_update);
+ interact("Continue, Retry, Update & retry, Quit? [Q] ", $force_update, $force_continue);
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, $sf) if (/^c$/i && $force_continue);
return 0 if /^c$/i;
+ return 1 if /^r$/i;
last if (/^u$/i);
}
}
+##################################################
+# Custom munges
+# keyed by name of munge; value is a ref to a hash
+# which is keyed by file, value a string to look for.
+# Usable files are:
+# paniclog, rejectlog, mainlog, stdout, stderr, msglog, mail
+# Search strings starting with 's' do substitutions;
+# with '/' do line-skips.
+##################################################
+$munges =
+ { 'dnssec' =>
+ { 'stderr' => '/^Reverse DNS security status: unverified\n/', },
+
+ 'gnutls_unexpected' =>
+ { 'mainlog' => '/\(recv\): A TLS packet with unexpected length was received./', },
+
+ 'gnutls_handshake' =>
+ { 'mainlog' => 's/\(gnutls_handshake\): Error in the push function/\(gnutls_handshake\): A TLS packet with unexpected length was received/', },
+
+ 'tpda' =>
+ { 'stdout' => '/tpda_delivery_action =/', },
+
+ };
+
+
##################################################
# Subroutine to check the output of a test #
##################################################
# This function is called when the series of subtests is complete. It makes
-# use of check() file, whose arguments are:
+# use of check_file(), whose arguments are:
#
# [0] the name of the main raw output file
# [1] the name of the server raw output file or undef
# [2] where to put the munged copy
# [3] the name of the saved file
# [4] TRUE if this is a log file whose deliveries must be sorted
+# [5] an optional custom munge command
#
-# Arguments: none
+# Arguments: Optionally, name of a custom munge to run.
# Returns: 0 if the output compared equal
-# 1 if files were updated and the test must be re-run
+# 1 if re-run needed (files may have been updated)
sub check_output{
+my($mungename) = $_[0];
my($yield) = 0;
+my($munge) = $munges->{$mungename} if defined $mungename;
$yield = 1 if check_file("spool/log/paniclog",
"spool/log/serverpaniclog",
"test-paniclog-munged",
- "paniclog/$testno", 0);
+ "paniclog/$testno", 0,
+ $munge->{'paniclog'});
$yield = 1 if check_file("spool/log/rejectlog",
"spool/log/serverrejectlog",
"test-rejectlog-munged",
- "rejectlog/$testno", 0);
+ "rejectlog/$testno", 0,
+ $munge->{'rejectlog'});
$yield = 1 if check_file("spool/log/mainlog",
"spool/log/servermainlog",
"test-mainlog-munged",
- "log/$testno", $sortlog);
+ "log/$testno", $sortlog,
+ $munge->{'mainlog'});
if (!$stdout_skip)
{
$yield = 1 if check_file("test-stdout",
"test-stdout-server",
"test-stdout-munged",
- "stdout/$testno", 0);
+ "stdout/$testno", 0,
+ $munge->{'stdout'});
}
if (!$stderr_skip)
$yield = 1 if check_file("test-stderr",
"test-stderr-server",
"test-stderr-munged",
- "stderr/$testno", 0);
+ "stderr/$testno", 0,
+ $munge->{'stderr'});
}
# Compare any delivered messages, unless this test is skipped.
print ">> COMPARE $mail mail/$testno.$saved_mail\n" if $debug;
$yield = 1 if check_file($mail, undef, "test-mail-munged",
- "mail/$testno.$saved_mail", 0);
+ "mail/$testno.$saved_mail", 0,
+ $munge->{'mail'});
delete $expected_mails{"mail/$testno.$saved_mail"};
}
for (;;)
{
- interact("Continue, Update & retry, or Quit? [Q] ", $force_update);
+ interact("Continue, Update & retry, or Quit? [Q] ", $force_update, $force_continue);
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, "missing email") if (/^c$/i && $force_continue);
last if /^c$/i;
# For update, we not only have to unlink the file, but we must also
s/((?:[^\W_]{6}-){2}[^\W_]{2})
/new_value($1, "10Hm%s-0005vi-00", \$next_msgid)/egx;
$yield = 1 if check_file("spool/msglog/$msglog", undef,
- "test-msglog-munged", "msglog/$testno.$munged_msglog", 0);
+ "test-msglog-munged", "msglog/$testno.$munged_msglog", 0,
+ $munge->{'msglog'});
delete $expected_msglogs{"$testno.$munged_msglog"};
}
}
for (;;)
{
- interact("Continue, Update, or Quit? [Q] ", $force_update);
+ interact("Continue, Update, or Quit? [Q] ", $force_update, $force_continue);
tests_exit(1) if /^q?$/i;
+ log_failure($log_failed_filename, $testno, "missing msglog") if (/^c$/i && $force_continue);
last if /^c$/i;
if (/^u$/i)
{
# reference to the subtest number, holding previous value
# reference to the expected return code value
# reference to where to put the command name (for messages)
+# auxilliary information returned from a previous run
#
# Returns: 0 the commmand was executed inline, no subprocess was run
# 1 a non-exim command was run and waited for
# 2 an exim command was run and waited for
# 3 a command was run and not waited for (daemon, server, exim_lock)
# 4 EOF was encountered after an initial return code line
+# Optionally alse a second parameter, a hash-ref, with auxilliary information:
+# exim_pid: pid of a run process
+# munge: name of a post-script results munger
sub run_command{
my($testno) = $_[0];
my($subtestref) = $_[1];
my($commandnameref) = $_[3];
+my($aux_info) = $_[4];
my($yield) = 1;
if (/^(\d+)\s*$/) # Handle unusual return code
if (/^gnutls/)
{
- run_system "sudo cp -p aux-fixed/gnutls-params spool/gnutls-params;" .
- "sudo chown $parm_eximuser:$parm_eximgroup spool/gnutls-params;" .
- "sudo chmod 0400 spool/gnutls-params";
+ my $gen_fn = "spool/gnutls-params-$gnutls_dh_bits_normal";
+ run_system "sudo cp -p aux-fixed/gnutls-params $gen_fn;" .
+ "sudo chown $parm_eximuser:$parm_eximgroup $gen_fn;" .
+ "sudo chmod 0400 $gen_fn";
return 1;
}
if (/^killdaemon/)
{
- $pid = `cat $parm_cwd/spool/exim-daemon.*`;
- run_system("sudo /bin/kill -SIGINT $pid");
- close DAEMONCMD; # Waits for process
- run_system("sudo /bin/rm -f spool/exim-daemon.*");
- return 1;
+ my $return_extra = {};
+ if (exists $aux_info->{exim_pid})
+ {
+ $pid = $aux_info->{exim_pid};
+ $return_extra->{exim_pid} = undef;
+ print ">> killdaemon: recovered pid $pid\n" if $debug;
+ if ($pid)
+ {
+ run_system("sudo /bin/kill -SIGINT $pid");
+ wait;
+ }
+ } else {
+ $pid = `cat $parm_cwd/spool/exim-daemon.*`;
+ if ($pid)
+ {
+ run_system("sudo /bin/kill -SIGINT $pid");
+ close DAEMONCMD; # Waits for process
+ }
+ }
+ run_system("sudo /bin/rm -f spool/exim-daemon.*");
+ return (1, $return_extra);
}
}
+# The "munge" command selects one of a hardwired set of test-result modifications
+# to be made before result compares are run agains the golden set. This lets
+# us account for test-system dependent things which only affect a few, but known,
+# test-cases.
+# Currently only the last munge takes effect.
+
+if (/^munge\s+(.*)$/)
+ {
+ return (0, { munge => $1 });
+ }
+
+
# The "sleep" command does just that. For sleeps longer than 1 second we
# tell the user what's going on.
my($i);
for ($i = @msglist; $i > 0; $i--) { $args =~ s/\$msg$i/$msglist[$i-1]/g; }
+ if ( $args =~ /\$msg\d/ )
+ {
+ tests_exit(-1, "Not enough messages in spool, for test $testno line $lineno\n");
+ }
}
# If -d is specified in $optargs, remove it from $args; i.e. let
select(undef, undef, undef, 0.3); # Let the daemon get going
return 3; # Don't wait
}
+ elsif ($cmd =~ /\s-DSERVER=wait:(\d+)\s/)
+ {
+ my $listen_port = $1;
+ my $waitmode_sock = new FileHandle;
+ if ($debug) { printf ">> wait-mode daemon: $cmd\n"; }
+ run_system("sudo mkdir spool/log 2>/dev/null");
+ run_system("sudo chown $parm_eximuser:$parm_eximgroup spool/log");
+
+ my ($s_ip,$s_port) = ('127.0.0.1', $listen_port);
+ my $sin = sockaddr_in($s_port, inet_aton($s_ip))
+ or die "** Failed packing $s_ip:$s_port\n";
+ socket($waitmode_sock, PF_INET, SOCK_STREAM, getprotobyname('tcp'))
+ or die "** Unable to open socket $s_ip:$s_port: $!\n";
+ setsockopt($waitmode_sock, SOL_SOCKET, SO_REUSEADDR, 1)
+ or die "** Unable to setsockopt(SO_REUSEADDR): $!\n";
+ bind($waitmode_sock, $sin)
+ or die "** Unable to bind socket ($s_port): $!\n";
+ listen($waitmode_sock, 5);
+ my $pid = fork();
+ if (not defined $pid) { die "** fork failed: $!\n" }
+ if (not $pid) {
+ close(STDIN);
+ open(STDIN, "<&", $waitmode_sock) or die "** dup sock to stdin failed: $!\n";
+ close($waitmode_sock);
+ print "[$$]>> ${cmd}-server\n" if ($debug);
+ exec "exec ${cmd}-server";
+ exit(1);
+ }
+ while (<SCRIPT>) { $lineno++; last if /^\*{4}\s*$/; } # Ignore any input
+ select(undef, undef, undef, 0.3); # Let the daemon get going
+ return (3, { exim_pid => $pid }); # Don't wait
+ }
}
print "Exim tester $testversion\n";
+##################################################
+# Some tests check created file modes #
+##################################################
+
+umask 022;
+
+
##################################################
# Check for the "less" command #
##################################################
# If the first character of the first argument is '/', the argument is taken
# as the path to the binary.
-$parm_exim = (@ARGV > 0 && $ARGV[0] =~ ?^/?)? shift @ARGV : "";
+$parm_exim = (@ARGV > 0 && $ARGV[0] =~ m?^/?)? shift @ARGV : "";
print "Exim binary is $parm_exim\n" if $parm_exim ne "";
{
if ($arg eq "-DEBUG") { $debug = 1; $cr = "\n"; next; }
if ($arg eq "-DIFF") { $cf = "diff -u"; next; }
+ if ($arg eq "-CONTINUE"){$force_continue = 1;
+ $more = "cat";
+ next; }
if ($arg eq "-UPDATE") { $force_update = 1; next; }
if ($arg eq "-NOIPV4") { $have_ipv4 = 0; next; }
if ($arg eq "-NOIPV6") { $have_ipv6 = 0; next; }
# Find what is in the binary #
##################################################
-open(EXIMINFO, "$parm_exim -C $parm_cwd/confs/0000 -DDIR=$parm_cwd " .
+# deal with TRUSTED_CONFIG_LIST restrictions
+unlink("$parm_cwd/test-config") if -e "$parm_cwd/test-config";
+symlink("$parm_cwd/confs/0000", "$parm_cwd/test-config")
+ or die "Unable to link initial config into place: $!\n";
+
+print("Probing with config file: $parm_cwd/test-config\n");
+open(EXIMINFO, "$parm_exim -d -C $parm_cwd/test-config -DDIR=$parm_cwd " .
"-bP exim_user exim_group|") ||
die "** Cannot run $parm_exim: $!\n";
while(<EXIMINFO>)
if ($parm_eximuser =~ /^\d+$/) { $parm_exim_uid = $parm_eximuser; }
else { $parm_exim_uid = getpwnam($parm_eximuser); }
}
+else
+ {
+ print "Unable to extract exim_user from binary.\n";
+ print "Check if Exim refused to run; if so, consider:\n";
+ print " TRUSTED_CONFIG_LIST ALT_CONFIG_PREFIX WHITELIST_D_MACROS\n";
+ die "Failing to get information from binary.\n";
+ }
if (defined $parm_eximgroup)
{
else { $parm_exim_gid = getgrnam($parm_eximgroup); }
}
-open(EXIMINFO, "$parm_exim -bV -C $parm_cwd/confs/0000 -DDIR=$parm_cwd |") ||
+open(EXIMINFO, "$parm_exim -bV -C $parm_cwd/test-config -DDIR=$parm_cwd |") ||
die "** Cannot run $parm_exim: $!\n";
print "-" x 78, "\n";
close(EXIMINFO);
print "-" x 78, "\n";
+unlink("$parm_cwd/test-config");
##################################################
# Check for SpamAssassin and ClamAV #
if (defined $parm_support{'Content_Scanning'})
{
+ my $sock = new FileHandle;
+
if (system("spamc -h 2>/dev/null >/dev/null") == 0)
{
print "The spamc command works:\n";
{
my $sin = sockaddr_in($sport, inet_aton($sint))
or die "** Failed packing $sint:$sport\n";
- socket(SOCK, PF_INET, SOCK_STREAM, getprotobyname('tcp'))
+ socket($sock, PF_INET, SOCK_STREAM, getprotobyname('tcp'))
or die "** Unable to open socket $sint:$sport\n";
local $SIG{ALRM} =
sub { die "** Timeout while connecting to socket $sint:$sport\n"; };
alarm(5);
- connect(SOCK, $sin)
+ connect($sock, $sin)
or die "** Unable to connect to socket $sint:$sport\n";
alarm(0);
- select((select(SOCK), $| = 1)[0]);
- print SOCK "bad command\r\n";
+ select((select($sock), $| = 1)[0]);
+ print $sock "bad command\r\n";
$SIG{ALRM} =
sub { die "** Timeout while reading from socket $sint:$sport\n"; };
alarm(10);
- my $res = <SOCK>;
+ my $res = <$sock>;
alarm(0);
$res =~ m|^SPAMD/|
{
die "** Unknown socket domain '$socket_domain' (should not happen)\n";
}
- socket(SOCK, $socket_domain, SOCK_STREAM, 0) or die "** Unable to open socket '$parm_clamsocket'\n";
+ socket($sock, $socket_domain, SOCK_STREAM, 0) or die "** Unable to open socket '$parm_clamsocket'\n";
local $SIG{ALRM} = sub { die "** Timeout while connecting to socket '$parm_clamsocket'\n"; };
alarm(5);
- connect(SOCK, $socket) or die "** Unable to connect to socket '$parm_clamsocket'\n";
+ connect($sock, $socket) or die "** Unable to connect to socket '$parm_clamsocket'\n";
alarm(0);
- my $ofh = select SOCK; $| = 1; select $ofh;
- print SOCK "PING\n";
+ my $ofh = select $sock; $| = 1; select $ofh;
+ print $sock "PING\n";
$SIG{ALRM} = sub { die "** Timeout while reading from socket '$parm_clamsocket'\n"; };
alarm(10);
- my $res = <SOCK>;
+ my $res = <$sock>;
alarm(0);
$res =~ /PONG/ or die "** Did not get PONG from socket '$parm_clamsocket'. It said: $res\n";
print "Program caller is $parm_caller, whose group is $parm_caller_group\n";
print "Home directory is $parm_caller_home\n";
+unless (defined $parm_eximgroup)
+ {
+ print "Unable to derive \$parm_eximgroup.\n";
+ die "** ABANDONING.\n";
+ }
+
print "You need to be in the Exim group to run these tests. Checking ...";
if (`groups` =~ /\b\Q$parm_eximgroup\E\b/)
print "\n*** Host name is not fully qualified: this may cause problems ***\n\n";
}
-# Find the user's shell
+if ($parm_hostname =~ /[[:upper:]]/)
+ {
+ print "\n*** Host name has upper case characters: this may cause problems ***\n\n";
+ }
-$parm_shell = $ENV{'SHELL'};
##################################################
# Certain of the tests make use of some of Exim's utilities. We do not need
# to be root to copy these.
-($parm_exim_dir) = $parm_exim =~ ?^(.*)/exim?;
+($parm_exim_dir) = $parm_exim =~ m?^(.*)/exim?;
$dbm_build_deleted = 0;
if (defined $parm_lookups{'dbm'} &&
}
}
+# Set a user's shell, distinguishable from /bin/sh
+
+symlink("/bin/sh","aux-var/sh");
+$ENV{'SHELL'} = $parm_shell = $parm_cwd . "/aux-var/sh";
##################################################
# Create fake DNS zones for this host #
if ($have_ipv6 && $parm_ipv6 ne "::1")
{
- my(@components) = split /:/, $parm_ipv6;
+ my($exp_v6) = $parm_ipv6;
+ $exp_v6 =~ s/[^:]//g;
+ if ( $parm_ipv6 =~ /^([^:].+)::$/ ) {
+ $exp_v6 = $1 . ':0' x (9-length($exp_v6));
+ } elsif ( $parm_ipv6 =~ /^(.+)::(.+)$/ ) {
+ $exp_v6 = $1 . ':0' x (8-length($exp_v6)) . ':' . $2;
+ } elsif ( $parm_ipv6 =~ /^::(.+[^:])$/ ) {
+ $exp_v6 = '0:' x (9-length($exp_v6)) . $1;
+ } else {
+ $exp_v6 = $parm_ipv6;
+ }
+ my(@components) = split /:/, $exp_v6;
my(@nibbles) = reverse (split /\s*/, shift @components);
my($sep) = "";
open(T, "/dev/tty") || tests_exit(-1, "Failed to open /dev/tty: $!");
print "\nPress RETURN to run the tests: ";
-$_ = <T>;
+$_ = $force_continue ? "c" : <T>;
print "\n";
$lasttestdir = "";
undef %expected_msglogs;
# Open the test's script
-
open(SCRIPT, "scripts/$test") ||
tests_exit(-1, "Failed to open \"scripts/$test\": $!");
+ # Run through the script once to set variables which should be global
+ while (<SCRIPT>)
+ {
+ if (/^no_message_check/) { $message_skip = 1; next; }
+ if (/^no_msglog_check/) { $msglog_skip = 1; next; }
+ if (/^no_stderr_check/) { $stderr_skip = 1; next; }
+ if (/^no_stdout_check/) { $stdout_skip = 1; next; }
+ if (/^rmfiltertest/) { $rmfiltertest = 1; next; }
+ if (/^sortlog/) { $sortlog = 1; next; }
+ }
+ # Reset to beginning of file for per test interpreting/processing
+ seek(SCRIPT, 0, 0);
# The first line in the script must be a comment that is used to identify
# the set of tests as a whole.
while (<SCRIPT>)
{
$lineno++;
+ # Could remove these variable settings because they are already
+ # set above, but doesn't hurt to leave them here.
if (/^no_message_check/) { $message_skip = 1; next; }
if (/^no_msglog_check/) { $msglog_skip = 1; next; }
if (/^no_stderr_check/) { $stderr_skip = 1; next; }
my($commandname) = "";
my($expectrc) = 0;
- my($rc) = run_command($testno, \$subtestno, \$expectrc, \$commandname);
+ my($rc, $run_extra) = run_command($testno, \$subtestno, \$expectrc, \$commandname, $TEST_STATE);
my($cmdrc) = $?;
- print ">> rc=$rc cmdrc=$cmdrc\n" if $debug;
+ if ($debug) {
+ print ">> rc=$rc cmdrc=$cmdrc\n";
+ if (defined $run_extra) {
+ foreach my $k (keys %$run_extra) {
+ my $v = defined $run_extra->{$k} ? qq!"$run_extra->{$k}"! : '<undef>';
+ print ">> $k -> $v\n";
+ }
+ }
+ }
+ $run_extra = {} unless defined $run_extra;
+ foreach my $k (keys %$run_extra) {
+ if (exists $TEST_STATE->{$k}) {
+ my $nv = defined $run_extra->{$k} ? qq!"$run_extra->{$k}"! : 'removed';
+ print ">> override of $k; was $TEST_STATE->{$k}, now $nv\n" if $debug;
+ }
+ if (defined $run_extra->{$k}) {
+ $TEST_STATE->{$k} = $run_extra->{$k};
+ } elsif (exists $TEST_STATE->{$k}) {
+ delete $TEST_STATE->{$k};
+ }
+ }
# Hit EOF after an initial return code number
for (;;)
{
- print "\nshow stdErr, show stdOut, Continue (without file comparison), or Quit? [Q] ";
- $_ = <T>;
+ print "\nshow stdErr, show stdOut, Retry, Continue (without file comparison), or Quit? [Q] ";
+ $_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
- last if /^c$/i;
+ log_failure($log_failed_filename, $testno, "exit code unexpected") if (/^c$/i && $force_continue);
+ print "... continue forced\n" if $force_continue;
+ last if /^[rc]$/i;
if (/^e$/i)
{
system("$more test-stderr");
}
}
+ $retry = 1 if /^r$/i;
$docheck = 0;
}
for (;;)
{
- print "\nShow server stdout, Continue, or Quit? [Q] ";
- $_ = <T>;
+ print "\nShow server stdout, Retry, Continue, or Quit? [Q] ";
+ $_ = $force_continue ? "c" : <T>;
tests_exit(1) if /^q?$/i;
- last if /^c$/i;
+ log_failure($log_failed_filename, $testno, "exit code unexpected") if (/^c$/i && $force_continue);
+ print "... continue forced\n" if $force_continue;
+ last if /^[rc]$/i;
if (/^s$/i)
{
close(S);
}
}
+ $retry = 1 if /^r$/i;
}
}
}
# function returns 0 if all is well, 1 if we should rerun the test (the files
# have been updated). It does not return if the user responds Q to a prompt.
+ if ($retry)
+ {
+ $retry = '0';
+ print (("#" x 79) . "\n");
+ redo;
+ }
+
if ($docheck)
{
- if (check_output() != 0)
+ if (check_output($TEST_STATE->{munge}) != 0)
{
print (("#" x 79) . "\n");
redo;
tests_exit(0);
# End of runtest script
-
+# vim: set sw=2 et :
git://git.exim.org / exim.git / blobdiff