-$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.259 2005/11/14 15:28:48 ph10 Exp $
+$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.290 2006/02/10 14:25:43 ph10 Exp $
Change log file for Exim from version 4.21
-------------------------------------------
+Exim version 4.61
+-----------------
+
+PH/01 The code for finding all the local interface addresses on a FreeBSD
+ system running IPv6 was broken. This may well have applied to all BSD
+ systems, as well as to others that have similar system calls. The broken
+ code found IPv4 interfaces correctly, but gave incorrect values for the
+ IPv6 interfaces. In particular, ::1 was not found. The effect in Exim was
+ that it would not match correctly against @[] and not recognize the IPv6
+ addresses as local.
+
+PH/02 The ipliteral router was not recognizing addresses of the form user@
+ [ipv6:....] because it didn't know about the "ipv6:" prefix.
+
+PH/03 Added disable_ipv6.
+
+PH/04 Changed $reply_address to use the raw form of the headers instead of the
+ decoded form, because it is most often used to construct To: headers
+ lines in autoreplies, and the decoded form may well be syntactically
+ invalid. However, $reply_address has leading white space removed, and all
+ newlines turned into spaces so that the autoreply transport does not
+ grumble.
+
+PH/05 If group was specified without a user on a router, and no group or user
+ was specified on a transport, the group from the router was ignored.
+
+PH/06 Increased the number of ACL variables to 20 of each type, and arranged
+ for visible compile-time settings that can be used to change these
+ numbers, for those that want even more. Backwards compatibility with old
+ spool files has been maintained. However, going back to a previous Exim
+ release will lost any variables that are in spool files.
+
+PH/07 Two small changes when running in the test harness: increase delay when
+ passing a TCP/IP connection to a new process, in case the original
+ process has to generate a bounce, and remove special handling of
+ 127.0.0.2 (sic), which is no longer necessary.
+
+PH/08 Changed debug output of dbfn_open() flags from numbers to names, so as to
+ be the same on different OS.
+
+PH/09 Moved a debug statement in filter processing to avoid a race problem when
+ testing.
+
+JJ/01 exipick: fixed bug where -b (brief) output option showed "Vars:"
+ whether --show-vars was specified or not
+
+JJ/02 exipick: Added support for new ACL variable spool format introduced
+ in 4.61-PH/06
+
+PH/10 Fixed another bug related to PH/04 above: if an incoming message had a
+ syntactically invalid From: or Reply-to: line, and a filter used this to
+ generate an autoreply, and therefore failed to obtain an address for the
+ autoreply, Exim could try to deliver to a non-existent relative file
+ name, causing unrelated and misleading errors. What now happens is that
+ it logs this as a hard delivery error, but does not attempt to create a
+ bounce message.
+
+PH/11 The exinext utility has a -C option for testing purposes, but although
+ the given file was scanned by exinext itself; it wasn't being passed on
+ when Exim was called.
+
+PH/12 In the smtp transport, treat an explicit ECONNRESET error the same as
+ an end-of-file indication when reading a command response.
+
+PH/13 Domain literals for IPv6 were not recognized unless IPv6 support was
+ compiled. In many other places in Exim, IPv6 addresses are always
+ recognized, so I have changed this. It also means that IPv4 domain
+ literals of the form [IPV4:n.n.n.n] are now always recognized.
+
+PH/14 When a uid/gid is specified for the queryprogram router, it cannot be
+ used if the router is not running as root, for example, when verifying at
+ ACL time, or when using -bh. The debugging output from this situation was
+ non-existent - all you got was a failure to exec. I have made two
+ changes:
+
+ (a) Failures to set uid/gid, the current directory, or a process leader
+ in a subprocess such as that created by queryprogram now generate
+ suitable debugging ouput when -d is set.
+
+ (b) The queryprogram router detects when it is not running as root,
+ outputs suitable debugging information if -d is set, and then runs
+ the subprocess without attempting to change uid/gid.
+
+PH/15 Minor change to Makefile for building test_host (undocumented testing
+ feature).
+
+PH/16 As discussed on the list in Nov/Dec: Exim no longer looks at the
+ additional section of a DNS packet that returns MX or SRV records.
+ Instead, it always explicitly searches for A/AAAA records. This avoids
+ major problems that occur when a DNS server includes only records of one
+ type (A or AAAA) in an MX/SRV packet. A byproduct of this change has
+ fixed another bug: if SRV records were looked up and the corresponding
+ address records were *not* found in the additional section, the port
+ values from the SRV records were lost.
+
+PH/17 If a delivery to a pipe, file, or autoreply was deferred, Exim was not
+ using the correct key (the original address) when searching the retry
+ rules in order to find which one to use for generating the retry hint.
+
+PH/18 If quota_warn_message contains a From: header, Exim now refrains from
+ adding the default one. Similarly, if it contains a Reply-To: header, the
+ errors_reply_to option, if set, is not used.
+
+PH/19 When calculating a retry time, Exim used to measure the "time since
+ failure" by looking at the "first failed" field in the retry record. Now
+ it does not use this if it is later than than the arrival time of the
+ message. Instead it uses the arrival time. This makes for better
+ behaviour in cases where some deliveries succeed, thus re-setting the
+ "first failed" field. An example is a quota failure for a huge message
+ when small messages continue to be delivered. Without this change, the
+ "time since failure" will always be short, possible causing more frequent
+ delivery attempts for the huge message than are intended.
+
+PH/20 Added $auth1, $auth2, $auth3 to contain authentication data (as well as
+ $1, $2, $3) because the numerical variables can be reset during some
+ expansion items (e.g. "match"), thereby losing the authentication data.
+
+
+
Exim version 4.60
-----------------
PH/11 Added "${if def:sender_address {(envelope-from <$sender_address>)\n\t}}"
to the default Received: header definition.
+PH/12 Added log selector acl_warn_skipped (default on).
+
+PH/13 After a successful wildlsearch lookup, discard the values of numeric
+ variables because (a) they are in the wrong storage pool and (b) even if
+ they were copied, it wouldn't work properly because of the caching.
+
+PH/14 Add check_rfc2047_length to disable enforcement of RFC 2047 length
+ checking when decoding. Apparently there are clients that generate
+ overlong encoded strings. Why am I not surprised?
+
+PH/15 If the first argument of "${if match_address" was not empty, but did not
+ contain an "@" character, Exim crashed. Now it writes a panic log message
+ and treats the condition as false.
+
+PH/16 In autoreply, treat an empty string for "once" the same as unset.
+
+PH/17 A further patch from the Sieve maintainer: "Introduce the new Sieve
+ extension "envelope-auth". The code is finished and in agreement with
+ other implementations, but there is no documentation so far and in fact,
+ nobody wrote the draft yet. This extension is currently #undef'ed, thus
+ not changing the active code.
+
+ Print executed "if" and "elsif" statements when debugging is used. This
+ helps a great deal to understand what a filter does.
+
+ Document more things not specified clearly in RFC3028. I had all this
+ sorted out, when out of a sudden new issues came to my mind. Oops."
+
+PH/18 Exim was not recognizing the "net-" search type prefix in match_ip lists
+ (Bugzilla #53).
+
+PH/19 Exim expands the IPv6 address given to -bh to its full non-abbreviated
+ canonical form (as documented). However, after a host name lookup from
+ the IP address, check_host() was doing a simple string comparison with
+ addresses acquired from the DNS when checking that the found name did
+ have the original IP as one of its addresses. Since any found IPv6
+ addresses are likely to be in abbreviated form, the comparison could
+ fail. Luckily, there already exists a function for doing the comparison
+ by converting both addresses to binary, so now that is used instead of
+ the text comparison.
+
+PH/20 There was another similar case to PH/19, when a complete host name was
+ given in a host list; looking up its IP address could give an abbreviated
+ form, whereas the current host's name might or might not be abbreviated.
+ The same fix has been applied.
+
Exim version 4.54
-----------------
PH/05 Some modifications to the interface to the fake nameserver for the new
testing suite.
-PH/06 Add ${if def:sender_address {(envelope-from <$sender_address>)\n\t}}
- into the default Received: header string.
-
Exim version 4.53
git://git.exim.org / exim.git / blobdiff