* Exim - an Internet mail transport agent *
*************************************************/
+/* Copyright (c) The Exim Maintainers 2020 - 2022 */
/* Copyright (c) University of Cambridge 1995 - 2018 */
-/* Copyright (c) The Exim Maintainers 2020 */
/* See the file NOTICE for conditions of use and distribution. */
+/* SPDX-License-Identifier: GPL-2.0-or-later */
/* Code for handling Access Control Lists (ACLs) */
#include "exim.h"
+#ifndef MACRO_PREDEF
/* Default callout timeout */
[ACL_WARN] = BIT(OK)
};
+#endif
+
/* ACL condition and modifier codes - keep in step with the table that
follows.
down. */
ACLC_REGEX,
#endif
ACLC_REMOVE_HEADER,
+ ACLC_SEEN,
ACLC_SENDER_DOMAINS,
ACLC_SENDERS,
ACLC_SET,
ACL_BIT_MIME | ACL_BIT_NOTSMTP |
ACL_BIT_NOTSMTP_START),
},
+ [ACLC_SEEN] = { US"seen", TRUE, FALSE, 0 },
[ACLC_SENDER_DOMAINS] = { US"sender_domains", FALSE, FALSE,
ACL_BIT_AUTH | ACL_BIT_CONNECT |
ACL_BIT_HELO |
};
+#ifdef MACRO_PREDEF
+# include "macro_predef.h"
+void
+features_acl(void)
+{
+for (condition_def * c = conditions; c < conditions + nelem(conditions); c++)
+ {
+ uschar buf[64], * p, * s;
+ int n = sprintf(CS buf, "_ACL_%s_", c->is_modifier ? "MOD" : "COND");
+ for (p = buf + n, s = c->name; *s; s++) *p++ = toupper(*s);
+ *p = '\0';
+ builtin_macro_create(buf);
+ }
+}
+#endif
+
+
+#ifndef MACRO_PREDEF
/* Return values from decode_control(); used as index so keep in step
with the controls_list table that follows! */
{ US"no_delay_flush", FALSE,
ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START
},
-
+
[CONTROL_NO_ENFORCE_SYNC] =
{ US"no_enforce_sync", FALSE,
ACL_BIT_NOTSMTP | ACL_BIT_NOTSMTP_START
static int acl_check_wargs(int, address_item *, const uschar *, uschar **,
uschar **);
+static acl_block * acl_current = NULL;
+
/*************************************************
* Find control in list *
}
+static BOOL
+acl_varname_to_cond(const uschar ** sp, acl_condition_block * cond, uschar ** error)
+{
+const uschar * s = *sp, * endptr;
+
+#ifndef DISABLE_DKIM
+if ( Ustrncmp(s, "dkim_verify_status", 18) == 0
+ || Ustrncmp(s, "dkim_verify_reason", 18) == 0)
+ {
+ endptr = s+18;
+ if (isalnum(*endptr))
+ {
+ *error = string_sprintf("invalid variable name after \"set\" in ACL "
+ "modifier \"set %s\" "
+ "(only \"dkim_verify_status\" or \"dkim_verify_reason\" permitted)",
+ s);
+ return FALSE;
+ }
+ cond->u.varname = string_copyn(s, 18);
+ }
+else
+#endif
+ {
+ if (Ustrncmp(s, "acl_c", 5) != 0 && Ustrncmp(s, "acl_m", 5) != 0)
+ {
+ *error = string_sprintf("invalid variable name after \"set\" in ACL "
+ "modifier \"set %s\" (must start \"acl_c\" or \"acl_m\")", s);
+ return FALSE;
+ }
+
+ endptr = s + 5;
+ if (!isdigit(*endptr) && *endptr != '_')
+ {
+ *error = string_sprintf("invalid variable name after \"set\" in ACL "
+ "modifier \"set %s\" (digit or underscore must follow acl_c or acl_m)",
+ s);
+ return FALSE;
+ }
+
+ for ( ; *endptr && *endptr != '=' && !isspace(*endptr); endptr++)
+ if (!isalnum(*endptr) && *endptr != '_')
+ {
+ *error = string_sprintf("invalid character \"%c\" in variable name "
+ "in ACL modifier \"set %s\"", *endptr, s);
+ return FALSE;
+ }
+
+ cond->u.varname = string_copyn(s + 4, endptr - s - 4);
+ }
+s = endptr;
+Uskip_whitespace(&s);
+*sp = s;
+return TRUE;
+}
+
+
+static BOOL
+acl_data_to_cond(const uschar * s, acl_condition_block * cond,
+ const uschar * name, uschar ** error)
+{
+if (*s++ != '=')
+ {
+ *error = string_sprintf("\"=\" missing after ACL \"%s\" %s", name,
+ conditions[cond->type].is_modifier ? US"modifier" : US"condition");
+ return FALSE;;
+ }
+Uskip_whitespace(&s);
+cond->arg = string_copy(s);
+return TRUE;
+}
+
+
/*************************************************
* Read and parse one ACL *
*************************************************/
acl_block *this = NULL;
acl_condition_block *cond;
acl_condition_block **condp = NULL;
-uschar * s;
+const uschar * s;
*error = NULL;
{
int v, c;
BOOL negated = FALSE;
- uschar *saveline = s;
- uschar name[64];
+ const uschar * saveline = s;
+ uschar name[EXIM_DRIVERNAME_MAX];
/* Conditions (but not verbs) are allowed to be negated by an initial
exclamation mark. */
*error = string_sprintf("malformed ACL line \"%s\"", saveline);
return NULL;
}
- this = store_get(sizeof(acl_block), FALSE);
- *lastp = this;
- lastp = &(this->next);
+ *lastp = this = store_get(sizeof(acl_block), GET_UNTAINTED);
+ lastp = &this->next;
this->next = NULL;
this->condition = NULL;
this->verb = v;
this->srcline = config_lineno; /* for debug output */
this->srcfile = config_filename; /**/
- condp = &(this->condition);
- if (*s == 0) continue; /* No condition on this line */
+ condp = &this->condition;
+ if (!*s) continue; /* No condition on this line */
if (*s == '!')
{
negated = TRUE;
return NULL;
}
- cond = store_get(sizeof(acl_condition_block), FALSE);
+ cond = store_get(sizeof(acl_condition_block), GET_UNTAINTED);
cond->next = NULL;
cond->type = c;
cond->u.negated = negated;
*condp = cond;
- condp = &(cond->next);
+ condp = &cond->next;
/* The "set" modifier is different in that its argument is "name=value"
rather than just a value, and we can check the validity of the name, which
compatibility. */
if (c == ACLC_SET)
-#ifndef DISABLE_DKIM
- if ( Ustrncmp(s, "dkim_verify_status", 18) == 0
- || Ustrncmp(s, "dkim_verify_reason", 18) == 0)
- {
- uschar * endptr = s+18;
-
- if (isalnum(*endptr))
- {
- *error = string_sprintf("invalid variable name after \"set\" in ACL "
- "modifier \"set %s\" "
- "(only \"dkim_verify_status\" or \"dkim_verify_reason\" permitted)",
- s);
- return NULL;
- }
- cond->u.varname = string_copyn(s, 18);
- s = endptr;
- Uskip_whitespace(&s);
- }
- else
-#endif
- {
- uschar *endptr;
-
- if (Ustrncmp(s, "acl_c", 5) != 0 && Ustrncmp(s, "acl_m", 5) != 0)
- {
- *error = string_sprintf("invalid variable name after \"set\" in ACL "
- "modifier \"set %s\" (must start \"acl_c\" or \"acl_m\")", s);
- return NULL;
- }
-
- endptr = s + 5;
- if (!isdigit(*endptr) && *endptr != '_')
- {
- *error = string_sprintf("invalid variable name after \"set\" in ACL "
- "modifier \"set %s\" (digit or underscore must follow acl_c or acl_m)",
- s);
- return NULL;
- }
-
- while (*endptr && *endptr != '=' && !isspace(*endptr))
- {
- if (!isalnum(*endptr) && *endptr != '_')
- {
- *error = string_sprintf("invalid character \"%c\" in variable name "
- "in ACL modifier \"set %s\"", *endptr, s);
- return NULL;
- }
- endptr++;
- }
-
- cond->u.varname = string_copyn(s + 4, endptr - s - 4);
- s = endptr;
- Uskip_whitespace(&s);
- }
+ if (!acl_varname_to_cond(&s, cond, error)) return NULL;
/* For "set", we are now positioned for the data. For the others, only
"endpass" has no data */
if (c != ACLC_ENDPASS)
- {
- if (*s++ != '=')
- {
- *error = string_sprintf("\"=\" missing after ACL \"%s\" %s", name,
- conditions[c].is_modifier ? US"modifier" : US"condition");
- return NULL;
- }
- Uskip_whitespace(&s);
- cond->arg = string_copy(s);
- }
+ if (!acl_data_to_cond(s, cond, name, error)) return NULL;
}
return yield;
{
/* The header_line struct itself is not tainted, though it points to
possibly tainted data. */
- header_line * h = store_get(sizeof(header_line), FALSE);
+ header_line * h = store_get(sizeof(header_line), GET_UNTAINTED);
h->text = hdr;
h->next = NULL;
h->type = newtype;
/* Previous success */
-if (sender_host_name != NULL) return OK;
+if (sender_host_name) return OK;
/* Previous failure */
tree_node *t;
const uschar *found;
int priority, weight, port;
-dns_answer * dnsa = store_get_dns_answer();
+dns_answer * dnsa;
dns_scan dnss;
dns_record *rr;
-int rc, type;
-uschar target[256];
+int rc, type, yield;
+#define TARGET_SIZE 256
+uschar * target = store_get(TARGET_SIZE, GET_TAINTED);
/* Work out the domain we are using for the CSA lookup. The default is the
client's HELO domain. If the client has not said HELO, use its IP address
while (isspace(*domain) && *domain != '\0') ++domain;
if (*domain == '\0') domain = sender_helo_name;
-if (domain == NULL) domain = sender_host_address;
-if (sender_host_address == NULL) return CSA_UNKNOWN;
+if (!domain) domain = sender_host_address;
+if (!sender_host_address) return CSA_UNKNOWN;
/* If we have an address literal, strip off the framing ready for turning it
into a domain. The framing consists of matched square brackets possibly
for this domain. The name is filled in now, and the value is filled in when
we return from this function. */
-t = tree_search(csa_cache, domain);
-if (t != NULL) return t->data.val;
+if ((t = tree_search(csa_cache, domain)))
+ return t->data.val;
-t = store_get_perm(sizeof(tree_node) + Ustrlen(domain), is_tainted(domain));
+t = store_get_perm(sizeof(tree_node) + Ustrlen(domain), domain);
Ustrcpy(t->name, domain);
(void)tree_insertnode(&csa_cache, t);
/* Now we are ready to do the actual DNS lookup(s). */
found = domain;
+dnsa = store_get_dns_answer();
switch (dns_special_lookup(dnsa, domain, T_CSA, &found))
{
/* If something bad happened (most commonly DNS_AGAIN), defer. */
default:
- return t->data.val = CSA_DEFER_SRV;
+ yield = CSA_DEFER_SRV;
+ goto out;
/* If we found nothing, the client's authorization is unknown. */
case DNS_NOMATCH:
case DNS_NODATA:
- return t->data.val = CSA_UNKNOWN;
+ yield = CSA_UNKNOWN;
+ goto out;
/* We got something! Go on to look at the reply in more detail. */
case DNS_SUCCEED:
- break;
+ break;
}
/* Scan the reply for well-formed CSA SRV records. */
SRV records of their own. */
if (Ustrcmp(found, domain) != 0)
- return t->data.val = port & 1 ? CSA_FAIL_EXPLICIT : CSA_UNKNOWN;
+ {
+ yield = port & 1 ? CSA_FAIL_EXPLICIT : CSA_UNKNOWN;
+ goto out;
+ }
/* This CSA SRV record refers directly to our domain, so we check the value
in the weight field to work out the domain's authorization. 0 and 1 are
address in order to authenticate it, so we treat it as unknown; values
greater than 3 are undefined. */
- if (weight < 2) return t->data.val = CSA_FAIL_DOMAIN;
+ if (weight < 2)
+ {
+ yield = CSA_FAIL_DOMAIN;
+ goto out;
+ }
if (weight > 2) continue;
target hostname then break to scan the additional data for its addresses. */
(void)dn_expand(dnsa->answer, dnsa->answer + dnsa->answerlen, p,
- (DN_EXPAND_ARG4_TYPE)target, sizeof(target));
+ (DN_EXPAND_ARG4_TYPE)target, TARGET_SIZE);
DEBUG(D_acl) debug_printf_indent("CSA target is %s\n", target);
/* If we didn't break the loop then no appropriate records were found. */
-if (!rr) return t->data.val = CSA_UNKNOWN;
+if (!rr)
+ {
+ yield = CSA_UNKNOWN;
+ goto out;
+ }
/* Do not check addresses if the target is ".", in accordance with RFC 2782.
A target of "." indicates there are no valid addresses, so the client cannot
equivalent to weight=1, but we check for it in order to keep load off the
root name servers.) Note that dn_expand() turns "." into "". */
-if (Ustrcmp(target, "") == 0) return t->data.val = CSA_FAIL_NOADDR;
+if (Ustrcmp(target, "") == 0)
+ {
+ yield = CSA_FAIL_NOADDR;
+ goto out;
+ }
/* Scan the additional section of the CSA SRV reply for addresses belonging
to the target. If the name server didn't return any additional data (e.g.
to obtain the target addresses; otherwise we have a definitive result. */
rc = acl_verify_csa_address(dnsa, &dnss, RESET_ADDITIONAL, target);
-if (rc != CSA_FAIL_NOADDR) return t->data.val = rc;
+if (rc != CSA_FAIL_NOADDR)
+ {
+ yield = rc;
+ goto out;
+ }
/* The DNS lookup type corresponds to the IP version used by the client. */
/* If something bad happened (most commonly DNS_AGAIN), defer. */
default:
- return t->data.val = CSA_DEFER_ADDR;
+ yield = CSA_DEFER_ADDR;
+ break;
/* If the query succeeded, scan the addresses and return the result. */
case DNS_SUCCEED:
rc = acl_verify_csa_address(dnsa, &dnss, RESET_ANSWERS, target);
- if (rc != CSA_FAIL_NOADDR) return t->data.val = rc;
+ if (rc != CSA_FAIL_NOADDR)
+ {
+ yield = rc;
+ break;
+ }
/* else fall through */
/* If the target has no IP addresses, the client cannot have an authorized
case DNS_NOMATCH:
case DNS_NODATA:
- return t->data.val = CSA_FAIL_NOADDR;
+ yield = CSA_FAIL_NOADDR;
+ break;
}
+
+out:
+
+store_free_dns_answer(dnsa);
+return t->data.val = yield;
}
{
if (!*user_msgptr && *log_msgptr)
*user_msgptr = string_sprintf("Rejected after %s: %s",
- smtp_names[smtp_connection_had[smtp_ch_index-1]], *log_msgptr);
+ smtp_names[smtp_connection_had[SMTP_HBUFF_PREV(smtp_ch_index)]],
+ *log_msgptr);
if (rc == DEFER) f.acl_temp_details = TRUE;
}
}
/* No Bloom filter. This basic ratelimit block is initialized below. */
HDEBUG(D_acl) debug_printf_indent("ratelimit creating new rate data block\n");
dbdb_size = sizeof(*dbd);
- dbdb = store_get(dbdb_size, FALSE); /* not tainted */
+ dbdb = store_get(dbdb_size, GET_UNTAINTED);
}
else
{
extra = (int)limit * 2 - sizeof(dbdb->bloom);
if (extra < 0) extra = 0;
dbdb_size = sizeof(*dbdb) + extra;
- dbdb = store_get(dbdb_size, FALSE); /* not tainted */
+ dbdb = store_get(dbdb_size, GET_UNTAINTED);
dbdb->bloom_epoch = tv.tv_sec;
dbdb->bloom_size = sizeof(dbdb->bloom) + extra;
memset(dbdb->bloom, 0, dbdb->bloom_size);
/* Store the result in the tree for future reference. Take the taint status
from the key for consistency even though it's unlikely we'll ever expand this. */
-t = store_get(sizeof(tree_node) + Ustrlen(key), is_tainted(key));
+t = store_get(sizeof(tree_node) + Ustrlen(key), key);
t->data.ptr = dbd;
Ustrcpy(t->name, key);
(void)tree_insertnode(anchor, t);
+/*************************************************
+* Handle a check for previously-seen *
+*************************************************/
+
+/*
+ACL clauses like: seen = -5m / key=$foo / readonly
+
+Return is true for condition-true - but the semantics
+depend heavily on the actual use-case.
+
+Negative times test for seen-before, positive for seen-more-recently-than
+(the given interval before current time).
+
+All are subject to history not having been cleaned from the DB.
+
+Default for seen-before is to create if not present, and to
+update if older than 10d (with the seen-test time).
+Default for seen-since is to always create or update.
+
+Options:
+ key=value. Default key is $sender_host_address
+ readonly
+ write
+ refresh=<interval>: update an existing DB entry older than given
+ amount. Default refresh lacking this option is 10d.
+ The update sets the record timestamp to the seen-test time.
+
+XXX do we need separate nocreate, noupdate controls?
+
+Arguments:
+ arg the option string for seen=
+ where ACL_WHERE_xxxx indicating which ACL this is
+ log_msgptr for error messages
+
+Returns: OK - Condition is true
+ FAIL - Condition is false
+ DEFER - Problem opening history database
+ ERROR - Syntax error in options
+*/
+
+static int
+acl_seen(const uschar * arg, int where, uschar ** log_msgptr)
+{
+enum { SEEN_DEFAULT, SEEN_READONLY, SEEN_WRITE };
+
+const uschar * list = arg;
+int slash = '/', interval, mode = SEEN_DEFAULT, yield = FAIL;
+BOOL before;
+int refresh = 10 * 24 * 60 * 60; /* 10 days */
+const uschar * ele, * key = sender_host_address;
+open_db dbblock, * dbm;
+dbdata_seen * dbd;
+time_t now;
+
+/* Parse the first element, the time-relation. */
+
+if (!(ele = string_nextinlist(&list, &slash, NULL, 0)))
+ goto badparse;
+if ((before = *ele == '-'))
+ ele++;
+if ((interval = readconf_readtime(ele, 0, FALSE)) < 0)
+ goto badparse;
+
+/* Remaining elements are options */
+
+while ((ele = string_nextinlist(&list, &slash, NULL, 0)))
+ if (Ustrncmp(ele, "key=", 4) == 0)
+ key = ele + 4;
+ else if (Ustrcmp(ele, "readonly") == 0)
+ mode = SEEN_READONLY;
+ else if (Ustrcmp(ele, "write") == 0)
+ mode = SEEN_WRITE;
+ else if (Ustrncmp(ele, "refresh=", 8) == 0)
+ {
+ if ((refresh = readconf_readtime(ele + 8, 0, FALSE)) < 0)
+ goto badparse;
+ }
+ else
+ goto badopt;
+
+if (!(dbm = dbfn_open(US"seen", O_RDWR, &dbblock, TRUE, TRUE)))
+ {
+ HDEBUG(D_acl) debug_printf_indent("database for 'seen' not available\n");
+ *log_msgptr = US"database for 'seen' not available";
+ return DEFER;
+ }
+
+dbd = dbfn_read_with_length(dbm, key, NULL);
+now = time(NULL);
+if (dbd) /* an existing record */
+ {
+ time_t diff = now - dbd->time_stamp; /* time since the record was written */
+
+ if (before ? diff >= interval : diff < interval)
+ yield = OK;
+
+ if (mode == SEEN_READONLY)
+ { HDEBUG(D_acl) debug_printf_indent("seen db not written (readonly)\n"); }
+ else if (mode == SEEN_WRITE || !before)
+ {
+ dbd->time_stamp = now;
+ dbfn_write(dbm, key, dbd, sizeof(*dbd));
+ HDEBUG(D_acl) debug_printf_indent("seen db written (update)\n");
+ }
+ else if (diff >= refresh)
+ {
+ dbd->time_stamp = now - interval;
+ dbfn_write(dbm, key, dbd, sizeof(*dbd));
+ HDEBUG(D_acl) debug_printf_indent("seen db written (refresh)\n");
+ }
+ }
+else
+ { /* No record found, yield always FAIL */
+ if (mode != SEEN_READONLY)
+ {
+ dbdata_seen d = {.time_stamp = now};
+ dbfn_write(dbm, key, &d, sizeof(*dbd));
+ HDEBUG(D_acl) debug_printf_indent("seen db written (create)\n");
+ }
+ else
+ HDEBUG(D_acl) debug_printf_indent("seen db not written (readonly)\n");
+ }
+
+dbfn_close(dbm);
+return yield;
+
+
+badparse:
+ *log_msgptr = string_sprintf("failed to parse '%s'", arg);
+ return ERROR;
+badopt:
+ *log_msgptr = string_sprintf("unrecognised option '%s' in '%s'", ele, arg);
+ return ERROR;
+}
+
+
+
/*************************************************
* The udpsend ACL modifier *
*************************************************/
}
/* Make a single-item host list. */
-h = store_get(sizeof(host_item), FALSE);
+h = store_get(sizeof(host_item), GET_UNTAINTED);
memset(h, 0, sizeof(host_item));
h->name = hostname;
h->port = portnum;
address_item *addr, int level, BOOL *epp, uschar **user_msgptr,
uschar **log_msgptr, int *basic_errno)
{
-uschar *user_message = NULL;
-uschar *log_message = NULL;
+uschar * user_message = NULL;
+uschar * log_message = NULL;
int rc = OK;
-#ifdef WITH_CONTENT_SCAN
-int sep = -'/';
-#endif
for (; cb; cb = cb->next)
{
- const uschar *arg;
+ const uschar * arg;
int control_type;
+ BOOL textonly = FALSE;
/* The message and log_message items set up messages to be used in
case of rejection. They are expanded later. */
if (!conditions[cb->type].expand_at_top)
arg = cb->arg;
- else if (!(arg = expand_string(cb->arg)))
+
+ else if (!(arg = expand_string_2(cb->arg, &textonly)))
{
if (f.expand_string_forcedfail) continue;
*log_msgptr = string_sprintf("failed to expand ACL string \"%s\": %s",
switch(cb->type)
{
case ACLC_ADD_HEADER:
- setup_header(arg);
- break;
+ setup_header(arg);
+ break;
/* A nested ACL that returns "discard" makes sense only for an "accept" or
"discard" verb. */
verbs[verb]);
return ERROR;
}
- break;
+ break;
case ACLC_AUTHENTICATED:
rc = sender_host_authenticated ? match_isinlist(sender_host_authenticated,
&arg, 0, NULL, NULL, MCL_STRING, TRUE, NULL) : FAIL;
- break;
+ break;
#ifdef EXPERIMENTAL_BRIGHTMAIL
case ACLC_BMI_OPTIN:
/* The true/false parsing here should be kept in sync with that used in
expand.c when dealing with ECOND_BOOL so that we don't have too many
different definitions of what can be a boolean. */
- if (*arg == '-'
- ? Ustrspn(arg+1, "0123456789") == Ustrlen(arg+1) /* Negative number */
- : Ustrspn(arg, "0123456789") == Ustrlen(arg)) /* Digits, or empty */
- rc = (Uatoi(arg) == 0)? FAIL : OK;
- else
- rc = (strcmpic(arg, US"no") == 0 ||
- strcmpic(arg, US"false") == 0)? FAIL :
- (strcmpic(arg, US"yes") == 0 ||
- strcmpic(arg, US"true") == 0)? OK : DEFER;
- if (rc == DEFER)
- *log_msgptr = string_sprintf("invalid \"condition\" value \"%s\"", arg);
- break;
+ if (*arg == '-'
+ ? Ustrspn(arg+1, "0123456789") == Ustrlen(arg+1) /* Negative number */
+ : Ustrspn(arg, "0123456789") == Ustrlen(arg)) /* Digits, or empty */
+ rc = (Uatoi(arg) == 0)? FAIL : OK;
+ else
+ rc = (strcmpic(arg, US"no") == 0 ||
+ strcmpic(arg, US"false") == 0)? FAIL :
+ (strcmpic(arg, US"yes") == 0 ||
+ strcmpic(arg, US"true") == 0)? OK : DEFER;
+ if (rc == DEFER)
+ *log_msgptr = string_sprintf("invalid \"condition\" value \"%s\"", arg);
+ break;
case ACLC_CONTINUE: /* Always succeeds */
- break;
+ break;
case ACLC_CONTROL:
{
case CONTROL_FAKEREJECT:
cancel_cutthrough_connection(TRUE, US"fakereject");
- case CONTROL_FAKEDEFER:
+ case CONTROL_FAKEDEFER:
fake_response = (control_type == CONTROL_FAKEDEFER) ? DEFER : FAIL;
if (*p == '/')
{
const uschar *pp = p + 1;
while (*pp) pp++;
- fake_response_text = expand_string(string_copyn(p+1, pp-p-1));
+ /* The entire control= line was expanded at top so no need to expand
+ the part after the / */
+ fake_response_text = string_copyn(p+1, pp-p-1);
p = pp;
}
else /* Explicitly reset to default string */
case CONTROL_DEBUG:
{
- uschar * debug_tag = NULL;
- uschar * debug_opts = NULL;
- BOOL kill = FALSE;
+ uschar * debug_tag = NULL, * debug_opts = NULL;
+ BOOL kill = FALSE, stop = FALSE;
while (*p == '/')
{
}
else if (Ustrncmp(pp, "kill", 4) == 0)
{
- for (pp += 4; *pp && *pp != '/';) pp++;
+ pp += 4;
kill = TRUE;
}
- else
- while (*pp && *pp != '/') pp++;
+ else if (Ustrncmp(pp, "stop", 4) == 0)
+ {
+ pp += 4;
+ stop = TRUE;
+ }
+ else if (Ustrncmp(pp, "pretrigger=", 11) == 0)
+ debug_pretrigger_setup(pp+11);
+ else if (Ustrncmp(pp, "trigger=", 8) == 0)
+ {
+ if (Ustrncmp(pp += 8, "now", 3) == 0)
+ {
+ pp += 3;
+ debug_trigger_fire();
+ }
+ else if (Ustrncmp(pp, "paniclog", 8) == 0)
+ {
+ pp += 8;
+ dtrigger_selector |= BIT(DTi_panictrigger);
+ }
+ }
+ while (*pp && *pp != '/') pp++;
p = pp;
}
- if (kill)
- debug_logging_stop();
- else
- debug_logging_activate(debug_tag, debug_opts);
+ if (kill)
+ debug_logging_stop(TRUE);
+ else if (stop)
+ debug_logging_stop(FALSE);
+ else if (debug_tag || debug_opts)
+ debug_logging_activate(debug_tag, debug_opts);
break;
}
break;
}
- #ifdef EXPERIMENTAL_DCC
+#ifdef EXPERIMENTAL_DCC
case ACLC_DCC:
{
/* Separate the regular expression and any optional parameters. */
const uschar * list = arg;
- uschar *ss = string_nextinlist(&list, &sep, NULL, 0);
+ int sep = -'/';
+ uschar * ss = string_nextinlist(&list, &sep, NULL, 0);
/* Run the dcc backend. */
rc = dcc_process(&ss);
/* Modify return code based upon the existence of options. */
while ((ss = string_nextinlist(&list, &sep, NULL, 0)))
if (strcmpic(ss, US"defer_ok") == 0 && rc == DEFER)
rc = FAIL; /* FAIL so that the message is passed to the next ACL */
+ break;
}
- break;
- #endif
+#endif
- #ifdef WITH_CONTENT_SCAN
+#ifdef WITH_CONTENT_SCAN
case ACLC_DECODE:
- rc = mime_decode(&arg);
- break;
- #endif
+ rc = mime_decode(&arg);
+ break;
+#endif
case ACLC_DELAY:
{
#endif
}
}
+ break;
}
- break;
- #ifndef DISABLE_DKIM
+#ifndef DISABLE_DKIM
case ACLC_DKIM_SIGNER:
- if (dkim_cur_signer)
- rc = match_isinlist(dkim_cur_signer,
- &arg,0,NULL,NULL,MCL_STRING,TRUE,NULL);
- else
- rc = FAIL;
- break;
+ if (dkim_cur_signer)
+ rc = match_isinlist(dkim_cur_signer,
+ &arg, 0, NULL, NULL, MCL_STRING, TRUE, NULL);
+ else
+ rc = FAIL;
+ break;
case ACLC_DKIM_STATUS:
- rc = match_isinlist(dkim_verify_status,
- &arg,0,NULL,NULL,MCL_STRING,TRUE,NULL);
- break;
- #endif
+ rc = match_isinlist(dkim_verify_status,
+ &arg, 0, NULL, NULL, MCL_STRING, TRUE, NULL);
+ break;
+#endif
#ifdef SUPPORT_DMARC
case ACLC_DMARC_STATUS:
- if (!f.dmarc_has_been_checked)
- dmarc_process();
- f.dmarc_has_been_checked = TRUE;
- /* used long way of dmarc_exim_expand_query() in case we need more
- * view into the process in the future. */
- rc = match_isinlist(dmarc_exim_expand_query(DMARC_VERIFY_STATUS),
- &arg,0,NULL,NULL,MCL_STRING,TRUE,NULL);
- break;
+ if (!f.dmarc_has_been_checked)
+ dmarc_process();
+ f.dmarc_has_been_checked = TRUE;
+ /* used long way of dmarc_exim_expand_query() in case we need more
+ * view into the process in the future. */
+ rc = match_isinlist(dmarc_exim_expand_query(DMARC_VERIFY_STATUS),
+ &arg, 0, NULL, NULL, MCL_STRING, TRUE, NULL);
+ break;
#endif
case ACLC_DNSLISTS:
- rc = verify_check_dnsbl(where, &arg, log_msgptr);
- break;
+ rc = verify_check_dnsbl(where, &arg, log_msgptr);
+ break;
case ACLC_DOMAINS:
- rc = match_isinlist(addr->domain, &arg, 0, &domainlist_anchor,
- addr->domain_cache, MCL_DOMAIN, TRUE, CUSS &deliver_domain_data);
- break;
+ rc = match_isinlist(addr->domain, &arg, 0, &domainlist_anchor,
+ addr->domain_cache, MCL_DOMAIN, TRUE, CUSS &deliver_domain_data);
+ break;
/* The value in tls_cipher is the full cipher name, for example,
TLSv1:DES-CBC3-SHA:168, whereas the values to test for are just the
writing is poorly documented. */
case ACLC_ENCRYPTED:
- if (tls_in.cipher == NULL) rc = FAIL; else
- {
- uschar *endcipher = NULL;
- uschar *cipher = Ustrchr(tls_in.cipher, ':');
- if (!cipher) cipher = tls_in.cipher; else
- {
- endcipher = Ustrchr(++cipher, ':');
- if (endcipher) *endcipher = 0;
- }
- rc = match_isinlist(cipher, &arg, 0, NULL, NULL, MCL_STRING, TRUE, NULL);
- if (endcipher) *endcipher = ':';
- }
- break;
+ if (!tls_in.cipher) rc = FAIL;
+ else
+ {
+ uschar *endcipher = NULL;
+ uschar *cipher = Ustrchr(tls_in.cipher, ':');
+ if (!cipher) cipher = tls_in.cipher; else
+ {
+ endcipher = Ustrchr(++cipher, ':');
+ if (endcipher) *endcipher = 0;
+ }
+ rc = match_isinlist(cipher, &arg, 0, NULL, NULL, MCL_STRING, TRUE, NULL);
+ if (endcipher) *endcipher = ':';
+ }
+ break;
/* Use verify_check_this_host() instead of verify_check_host() so that
we can pass over &host_data to catch any looked up data. Once it has been
message in the same SMTP connection. */
case ACLC_HOSTS:
- rc = verify_check_this_host(&arg, sender_host_cache, NULL,
- sender_host_address ? sender_host_address : US"", CUSS &host_data);
- if (rc == DEFER) *log_msgptr = search_error_message;
- if (host_data) host_data = string_copy_perm(host_data, TRUE);
- break;
+ rc = verify_check_this_host(&arg, sender_host_cache, NULL,
+ sender_host_address ? sender_host_address : US"", CUSS &host_data);
+ if (rc == DEFER) *log_msgptr = search_error_message;
+ if (host_data) host_data = string_copy_perm(host_data, TRUE);
+ break;
case ACLC_LOCAL_PARTS:
- rc = match_isinlist(addr->cc_local_part, &arg, 0,
- &localpartlist_anchor, addr->localpart_cache, MCL_LOCALPART, TRUE,
- CUSS &deliver_localpart_data);
- break;
+ rc = match_isinlist(addr->cc_local_part, &arg, 0,
+ &localpartlist_anchor, addr->localpart_cache, MCL_LOCALPART, TRUE,
+ CUSS &deliver_localpart_data);
+ break;
case ACLC_LOG_REJECT_TARGET:
{
- int logbits = 0;
- int sep = 0;
- const uschar *s = arg;
- uschar * ss;
- while ((ss = string_nextinlist(&s, &sep, NULL, 0)))
+ int logbits = 0, sep = 0;
+ const uschar * s = arg;
+
+ for (uschar * ss; ss = string_nextinlist(&s, &sep, NULL, 0); )
{
if (Ustrcmp(ss, "main") == 0) logbits |= LOG_MAIN;
else if (Ustrcmp(ss, "panic") == 0) logbits |= LOG_PANIC;
}
}
log_reject_target = logbits;
+ break;
}
- break;
case ACLC_LOGWRITE:
{
if (logbits == 0) logbits = LOG_MAIN;
log_write(0, logbits, "%s", string_printing(s));
+ break;
}
- break;
- #ifdef WITH_CONTENT_SCAN
+#ifdef WITH_CONTENT_SCAN
case ACLC_MALWARE: /* Run the malware backend. */
{
/* Separate the regular expression and any optional parameters. */
const uschar * list = arg;
- uschar * ss = string_nextinlist(&list, &sep, NULL, 0);
- uschar * opt;
BOOL defer_ok = FALSE;
- int timeout = 0;
+ int timeout = 0, sep = -'/';
+ uschar * ss = string_nextinlist(&list, &sep, NULL, 0);
- while ((opt = string_nextinlist(&list, &sep, NULL, 0)))
+ for (uschar * opt; opt = string_nextinlist(&list, &sep, NULL, 0); )
if (strcmpic(opt, US"defer_ok") == 0)
defer_ok = TRUE;
else if ( strncmpic(opt, US"tmo=", 4) == 0
return ERROR;
}
- rc = malware(ss, timeout);
+ rc = malware(ss, textonly, timeout);
if (rc == DEFER && defer_ok)
rc = FAIL; /* FAIL so that the message is passed to the next ACL */
+ break;
}
- break;
case ACLC_MIME_REGEX:
- rc = mime_regex(&arg);
- break;
- #endif
+ rc = mime_regex(&arg, textonly);
+ break;
+#endif
case ACLC_QUEUE:
- if (is_tainted(arg))
- {
- *log_msgptr = string_sprintf("Tainted name '%s' for queue not permitted",
- arg);
- return ERROR;
- }
- if (Ustrchr(arg, '/'))
- {
- *log_msgptr = string_sprintf(
- "Directory separator not permitted in queue name: '%s'", arg);
- return ERROR;
- }
- queue_name = string_copy_perm(arg, FALSE);
- break;
+ if (is_tainted(arg))
+ {
+ *log_msgptr = string_sprintf("Tainted name '%s' for queue not permitted",
+ arg);
+ return ERROR;
+ }
+ if (Ustrchr(arg, '/'))
+ {
+ *log_msgptr = string_sprintf(
+ "Directory separator not permitted in queue name: '%s'", arg);
+ return ERROR;
+ }
+ queue_name = string_copy_perm(arg, FALSE);
+ break;
case ACLC_RATELIMIT:
- rc = acl_ratelimit(arg, where, log_msgptr);
- break;
+ rc = acl_ratelimit(arg, where, log_msgptr);
+ break;
case ACLC_RECIPIENTS:
- rc = match_address_list(CUS addr->address, TRUE, TRUE, &arg, NULL, -1, 0,
- CUSS &recipient_data);
- break;
+ rc = match_address_list(CUS addr->address, TRUE, TRUE, &arg, NULL, -1, 0,
+ CUSS &recipient_data);
+ break;
#ifdef WITH_CONTENT_SCAN
case ACLC_REGEX:
- rc = regex(&arg);
- break;
+ rc = regex(&arg, textonly);
+ break;
#endif
case ACLC_REMOVE_HEADER:
- setup_remove_header(arg);
- break;
+ setup_remove_header(arg);
+ break;
+
+ case ACLC_SEEN:
+ rc = acl_seen(arg, where, log_msgptr);
+ break;
case ACLC_SENDER_DOMAINS:
{
sdomain = sdomain ? sdomain + 1 : US"";
rc = match_isinlist(sdomain, &arg, 0, &domainlist_anchor,
sender_domain_cache, MCL_DOMAIN, TRUE, NULL);
+ break;
}
- break;
case ACLC_SENDERS:
- rc = match_address_list(CUS sender_address, TRUE, TRUE, &arg,
- sender_address_cache, -1, 0, CUSS &sender_data);
- break;
+ rc = match_address_list(CUS sender_address, TRUE, TRUE, &arg,
+ sender_address_cache, -1, 0, CUSS &sender_data);
+ break;
/* Connection variables must persist forever; message variables not */
#endif
acl_var_create(cb->u.varname)->data.ptr = string_copy(arg);
store_pool = old_pool;
+ break;
}
- break;
#ifdef WITH_CONTENT_SCAN
case ACLC_SPAM:
{
/* Separate the regular expression and any optional parameters. */
const uschar * list = arg;
- uschar *ss = string_nextinlist(&list, &sep, NULL, 0);
+ int sep = -'/';
+ uschar * ss = string_nextinlist(&list, &sep, NULL, 0);
rc = spam(CUSS &ss);
/* Modify return code based upon the existence of options. */
while ((ss = string_nextinlist(&list, &sep, NULL, 0)))
if (strcmpic(ss, US"defer_ok") == 0 && rc == DEFER)
rc = FAIL; /* FAIL so that the message is passed to the next ACL */
+ break;
}
- break;
#endif
#ifdef SUPPORT_SPF
case ACLC_SPF:
rc = spf_process(&arg, sender_address, SPF_PROCESS_NORMAL);
- break;
+ break;
+
case ACLC_SPF_GUESS:
rc = spf_process(&arg, sender_address, SPF_PROCESS_GUESS);
- break;
+ break;
#endif
case ACLC_UDPSEND:
- rc = acl_udpsend(arg, log_msgptr);
- break;
+ rc = acl_udpsend(arg, log_msgptr);
+ break;
/* If the verb is WARN, discard any user message from verification, because
such messages are SMTP responses, not header additions. The latter come
(until something changes it). */
case ACLC_VERIFY:
- rc = acl_verify(where, addr, arg, user_msgptr, log_msgptr, basic_errno);
- if (*user_msgptr)
- acl_verify_message = *user_msgptr;
- if (verb == ACL_WARN) *user_msgptr = NULL;
- break;
+ rc = acl_verify(where, addr, arg, user_msgptr, log_msgptr, basic_errno);
+ if (*user_msgptr)
+ acl_verify_message = *user_msgptr;
+ if (verb == ACL_WARN) *user_msgptr = NULL;
+ break;
default:
- log_write(0, LOG_MAIN|LOG_PANIC_DIE, "internal ACL error: unknown "
- "condition %d", cb->type);
- break;
+ log_write(0, LOG_MAIN|LOG_PANIC_DIE, "internal ACL error: unknown "
+ "condition %d", cb->type);
+ break;
}
/* If a condition was negated, invert OK/FAIL. */
+/************************************************/
+/* For error messages, a string describing the config location
+associated with current processing. NULL if not in an ACL. */
+
+uschar *
+acl_current_verb(void)
+{
+if (acl_current) return string_sprintf(" (ACL %s, %s %d)",
+ verbs[acl_current->verb], acl_current->srcfile, acl_current->srcline);
+return NULL;
+}
+
/*************************************************
* Check access using an ACL *
*************************************************/
acl_text = ss;
+if (is_tainted(acl_text) && !f.running_in_test_harness)
+ {
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "attempt to use tainted ACL text \"%s\"", acl_text);
+ /* Avoid leaking info to an attacker */
+ *log_msgptr = US"internal configuration error";
+ return ERROR;
+ }
+
/* Handle the case of a string that does not contain any spaces. Look for a
named ACL among those read from the configuration, or a previously read file.
It is possible that the pointer to the ACL is NULL if the configuration
else if (*ss == '/')
{
struct stat statbuf;
- if (is_tainted(ss))
- {
- log_write(0, LOG_MAIN|LOG_PANIC,
- "attempt to open tainted ACL file name \"%s\"", ss);
- /* Avoid leaking info to an attacker */
- *log_msgptr = US"internal configuration error";
- return ERROR;
- }
if ((fd = Uopen(ss, O_RDONLY, 0)) < 0)
{
*log_msgptr = string_sprintf("failed to open ACL file \"%s\": %s", ss,
}
/* If the string being used as a filename is tainted, so is the file content */
- acl_text = store_get(statbuf.st_size + 1, is_tainted(ss));
+ acl_text = store_get(statbuf.st_size + 1, ss);
acl_text_end = acl_text + statbuf.st_size + 1;
if (read(fd, acl_text, statbuf.st_size) != statbuf.st_size)
if (!acl && *log_msgptr) return ERROR;
if (fd >= 0)
{
- tree_node *t = store_get_perm(sizeof(tree_node) + Ustrlen(ss), is_tainted(ss));
+ tree_node * t = store_get_perm(sizeof(tree_node) + Ustrlen(ss), ss);
Ustrcpy(t->name, ss);
t->data.ptr = acl;
(void)tree_insertnode(&acl_anchor, t);
/* Now we have an ACL to use. It's possible it may be NULL. */
-while (acl)
+while ((acl_current = acl))
{
int cond;
int basic_errno = 0;
else if (cond == DEFER && LOGGING(acl_warn_skipped))
log_write(0, LOG_MAIN, "%s Warning: ACL \"warn\" statement skipped: "
"condition test deferred%s%s", host_and_ident(TRUE),
- (*log_msgptr == NULL)? US"" : US": ",
- (*log_msgptr == NULL)? US"" : *log_msgptr);
+ *log_msgptr ? US": " : US"",
+ *log_msgptr ? *log_msgptr : US"");
*log_msgptr = *user_msgptr = NULL; /* In case implicit DENY follows */
break;
/* Drop cutthrough conns, and drop heldopen verify conns if
the previous was not DATA */
{
- uschar prev = smtp_connection_had[smtp_ch_index-2];
+ uschar prev =
+ smtp_connection_had[SMTP_HBUFF_PREV(SMTP_HBUFF_PREV(smtp_ch_index))];
BOOL dropverify = !(prev == SCH_DATA || prev == SCH_BDAT);
cancel_cutthrough_connection(dropverify, US"quit or conndrop");
tree_node * node, ** root = name[0] == 'c' ? &acl_var_c : &acl_var_m;
if (!(node = tree_search(*root, name)))
{
- node = store_get(sizeof(tree_node) + Ustrlen(name), is_tainted(name));
+ node = store_get(sizeof(tree_node) + Ustrlen(name), name);
Ustrcpy(node->name, name);
(void)tree_insertnode(root, node);
}
*/
void
-acl_var_write(uschar *name, uschar *value, void *ctx)
+acl_var_write(uschar * name, uschar * value, void * ctx)
+{
+FILE * f = (FILE *)ctx;
+putc('-', f);
+if (is_tainted(value))
+ {
+ int q = quoter_for_address(value);
+ putc('-', f);
+ if (is_real_quoter(q)) fprintf(f, "(%s)", lookup_list[q]->name);
+ }
+fprintf(f, "acl%c %s %d\n%s\n", name[0], name+1, Ustrlen(value), value);
+}
+
+
+
+
+uschar *
+acl_standalone_setvar(const uschar * s)
{
-FILE *f = (FILE *)ctx;
-if (is_tainted(value)) putc('-', f);
-fprintf(f, "-acl%c %s %d\n%s\n", name[0], name+1, Ustrlen(value), value);
+acl_condition_block * cond = store_get(sizeof(acl_condition_block), GET_UNTAINTED);
+uschar * errstr = NULL, * log_msg = NULL;
+BOOL endpass_seen;
+int e;
+
+cond->next = NULL;
+cond->type = ACLC_SET;
+if (!acl_varname_to_cond(&s, cond, &errstr)) return errstr;
+if (!acl_data_to_cond(s, cond, US"'-be'", &errstr)) return errstr;
+
+if (acl_check_condition(ACL_WARN, cond, ACL_WHERE_UNKNOWN,
+ NULL, 0, &endpass_seen, &errstr, &log_msg, &e) != OK)
+ return string_sprintf("oops: %s", errstr);
+return string_sprintf("variable %s set", cond->u.varname);
}
+
+#endif /* !MACRO_PREDEF */
/* vi: aw ai sw=2
*/
/* End of acl.c */