/* Size of buffer for reading SMTP commands. We used to use 512, as defined
by RFC 821. However, RFC 1869 specifies that this must be increased for SMTP
commands that accept arguments, and this in particular applies to AUTH, where
-the data can be quite long. More recently this value was 2048 in Exim;
+the data can be quite long. More recently this value was 2048 in Exim;
however, RFC 4954 (circa 2007) recommends 12288 bytes to handle AUTH. Clients
-such as Thunderbird will send an AUTH with an initial-response for GSSAPI.
-The maximum size of a Kerberos ticket under Windows 2003 is 12000 bytes, and
+such as Thunderbird will send an AUTH with an initial-response for GSSAPI.
+The maximum size of a Kerberos ticket under Windows 2003 is 12000 bytes, and
we need room to handle large base64-encoded AUTHs for GSSAPI.
*/
QUIT_CMD, HELP_CMD,
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
PROXY_FAIL_IGNORE_CMD,
#endif
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
/*************************************************
* Restore socket timeout to previous value *
*************************************************/
/* Cannot configure local connection as a proxy inbound */
if (sender_host_address == NULL) return proxy_session;
-rc = verify_check_this_host(&proxy_required_hosts, NULL, NULL,
+rc = verify_check_this_host(&hosts_proxy, NULL, NULL,
sender_host_address, NULL);
if (rc == OK)
{
for (p = cmd_list; p < cmd_list_end; p++)
{
- #ifdef EXPERIMENTAL_PROXY
+ #ifdef SUPPORT_PROXY
/* Only allow QUIT command if Proxy Protocol parsing failed */
if (proxy_session && proxy_session_failed)
{
}
}
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
/* Only allow QUIT command if Proxy Protocol parsing failed */
if (proxy_session && proxy_session_failed)
return PROXY_FAIL_IGNORE_CMD;
if (is_inetd)
return string_sprintf("SMTP connection from %s (via inetd)", hostname);
-if ((log_extra_selector & LX_incoming_interface) != 0 &&
- interface_address != NULL)
+if (LOGGING(incoming_interface) && interface_address != NULL)
return string_sprintf("SMTP connection from %s I=[%s]:%d", hostname,
interface_address, interface_port);
int size = sizep ? *sizep : 0;
int ptr = ptrp ? *ptrp : 0;
- if ((log_extra_selector & LX_tls_cipher) != 0 && tls_in.cipher != NULL)
+ if (LOGGING(tls_cipher) && tls_in.cipher != NULL)
s = string_append(s, &size, &ptr, 2, US" X=", tls_in.cipher);
- if ((log_extra_selector & LX_tls_certificate_verified) != 0 &&
- tls_in.cipher != NULL)
+ if (LOGGING(tls_certificate_verified) && tls_in.cipher != NULL)
s = string_append(s, &size, &ptr, 2, US" CV=",
tls_in.certificate_verified? "yes":"no");
- if ((log_extra_selector & LX_tls_peerdn) != 0 && tls_in.peerdn != NULL)
+ if (LOGGING(tls_peerdn) && tls_in.peerdn != NULL)
s = string_append(s, &size, &ptr, 3, US" DN=\"",
string_printing(tls_in.peerdn), US"\"");
- if ((log_extra_selector & LX_tls_sni) != 0 && tls_in.sni != NULL)
+ if (LOGGING(tls_sni) && tls_in.sni != NULL)
s = string_append(s, &size, &ptr, 3, US" SNI=\"",
string_printing(tls_in.sni), US"\"");
int size, ptr, i;
uschar *s, *sep;
-if (smtp_mailcmd_count > 0 || (log_extra_selector & LX_smtp_no_mail) == 0)
+if (smtp_mailcmd_count > 0 || !LOGGING(smtp_no_mail))
return;
s = NULL;
if (smtp_batched_input) return TRUE;
-#ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
/* If valid Proxy Protocol source is connecting, set up session.
* Failure will not allow any SMTP function other than QUIT. */
proxy_session = FALSE;
incomplete_transaction_log(uschar *what)
{
if (sender_address == NULL || /* No transaction in progress */
- (log_write_selector & L_smtp_incomplete_transaction) == 0 /* Not logging */
- ) return;
+ !LOGGING(smtp_incomplete_transaction))
+ return;
/* Build list of recipients for logging */
setflag(sender_verified_failed, af_sverify_told);
- if (rc != FAIL || (log_extra_selector & LX_sender_verify_fail) != 0)
+ if (rc != FAIL || LOGGING(sender_verify_fail))
log_write(0, LOG_MAIN|LOG_REJECT, "%s sender verify %s for <%s>%s",
host_and_ident(TRUE),
((sender_verified_failed->special_action & 255) == DEFER)? "defer":"fail",
{
smtp_cmd_data = NULL;
- if ((c = smtp_in_auth(au, &s, &ss)) != OK)
- log_write(0, LOG_MAIN|LOG_REJECT, "%s authenticator failed for %s: %s",
- au->name, host_and_ident(FALSE), ss);
- else
+ if (smtp_in_auth(au, &s, &ss) == OK)
DEBUG(D_auth) debug_printf("tls auth succeeded\n");
-
+ else
+ DEBUG(D_auth) debug_printf("tls auth not succeeded\n");
break;
}
}
}
/* Advertise DSN support if configured to do so. */
- if (verify_check_host(&dsn_advertise_hosts) != FAIL)
+ if (verify_check_host(&dsn_advertise_hosts) != FAIL)
{
s = string_cat(s, &size, &ptr, smtp_code, 3);
s = string_cat(s, &size, &ptr, US"-DSN\r\n", 6);
rc = acl_check(ACL_WHERE_MAILAUTH, NULL, acl_smtp_mailauth,
&user_msg, &log_msg);
}
-
+
switch (rc)
{
case OK:
expand_check_condition(authenticated_by->mail_auth_condition,
authenticated_by->name, US"authenticator"))
break; /* Accept the AUTH */
-
+
ignore_msg = US"server_mail_auth_condition failed";
if (authenticated_id != NULL)
ignore_msg = string_sprintf("%s: authenticated ID=\"%s\"",
ignore_msg, authenticated_id);
-
+
/* Fall through */
-
+
case FAIL:
authenticated_sender = NULL;
log_write(0, LOG_MAIN, "ignoring AUTH=%s from %s (%s)",
value, host_and_ident(TRUE), ignore_msg);
break;
-
+
/* Should only get DEFER or ERROR here. Put back terminator
overrides for error message */
-
+
default:
value[-1] = '=';
name[-1] = ' ';
US"",
#endif
US"\r\n");
- else
+ else
{
#ifndef DISABLE_PRDR
if (prdr_requested)
if (user_msg == NULL) smtp_printf("250 Accepted\r\n");
else smtp_user_msg(US"250", user_msg);
receive_add_recipient(recipient, -1);
-
+
/* Set the dsn flags in the recipients_list */
recipients_list[recipients_count-1].orcpt = orcpt;
recipients_list[recipients_count-1].dsn_flags = flags;
/* If ETRN queue runs are to be serialized, check the database to
ensure one isn't already running. */
- if (smtp_etrn_serialize && !enq_start(etrn_serialize_key))
+ if (smtp_etrn_serialize && !enq_start(etrn_serialize_key, 1))
{
smtp_printf("458 Already processing %s\r\n", smtp_cmd_data);
break;
done = 1; /* Pretend eof - drops connection */
break;
- #ifdef EXPERIMENTAL_PROXY
+#ifdef SUPPORT_PROXY
case PROXY_FAIL_IGNORE_CMD:
smtp_printf("503 Command refused, required Proxy negotiation failed\r\n");
break;
- #endif
+#endif
default:
if (unknown_command_count++ >= smtp_max_unknown_commands)
git://git.exim.org / exim.git / blobdiff