* Exim - an Internet mail transport agent *
*************************************************/
+/* Copyright (c) The Exim Maintainers 2020 - 2022 */
/* Copyright (c) University of Cambridge 1995 - 2018 */
-/* Copyright (c) The Exim Maintainers 2020 */
/* See the file NOTICE for conditions of use and distribution. */
+/* SPDX-License-Identifier: GPL-2.0-or-later */
/* The main function: entry point, initialization, and high-level control.
# include <gnu/libc-version.h>
#endif
+#ifndef _TIME_H
+# include <time.h>
+#endif
+#ifndef NO_EXECINFO
+# include <execinfo.h>
+#endif
+
#ifdef USE_GNUTLS
# include <gnutls/gnutls.h>
# if GNUTLS_VERSION_NUMBER < 0x030103 && !defined(DISABLE_OCSP)
# endif
#endif
-#ifndef _TIME_H
-# include <time.h>
-#endif
-
extern void init_lookup_list(void);
for store allocation via Exim's store manager. The normal calls are actually
macros that pass over location information to make tracing easier. These
functions just interface to the standard macro calls. A good compiler will
-optimize out the tail recursion and so not make them too expensive. There
-are two sets of functions; one for use when we want to retain the compiled
-regular expression for a long time; the other for short-term use. */
+optimize out the tail recursion and so not make them too expensive. */
static void *
-function_store_get(size_t size)
+function_store_malloc(PCRE2_SIZE size, void * tag)
{
-/* For now, regard all RE results as potentially tainted. We might need
-more intelligence on this point. */
-return store_get((int)size, TRUE);
+return store_malloc((int)size);
}
static void
-function_dummy_free(void *block) { block = block; }
+function_store_free(void * block, void * tag)
+{
+/* At least some version of pcre2 pass a null pointer */
+if (block) store_free(block);
+}
+
static void *
-function_store_malloc(size_t size)
+function_store_get(PCRE2_SIZE size, void * tag)
{
-return store_malloc((int)size);
+return store_get((int)size, GET_UNTAINTED); /* loses track of taint */
}
static void
-function_store_free(void *block)
+function_store_nullfree(void * block, void * tag)
{
-store_free(block);
}
-/*************************************************
-* Compile regular expression and panic on fail *
-*************************************************/
-
-/* This function is called when failure to compile a regular expression leads
-to a panic exit. In other cases, pcre_compile() is called directly. In many
-cases where this function is used, the results of the compilation are to be
-placed in long-lived store, so we temporarily reset the store management
-functions that PCRE uses if the use_malloc flag is set.
-
-Argument:
- pattern the pattern to compile
- caseless TRUE if caseless matching is required
- use_malloc TRUE if compile into malloc store
+static void
+pcre_init(void)
+{
+pcre_mlc_ctx = pcre2_general_context_create(function_store_malloc, function_store_free, NULL);
+pcre_gen_ctx = pcre2_general_context_create(function_store_get, function_store_nullfree, NULL);
-Returns: pointer to the compiled pattern
-*/
+pcre_mlc_cmp_ctx = pcre2_compile_context_create(pcre_mlc_ctx);
+pcre_gen_cmp_ctx = pcre2_compile_context_create(pcre_gen_ctx);
-const pcre *
-regex_must_compile(const uschar *pattern, BOOL caseless, BOOL use_malloc)
-{
-int offset;
-int options = PCRE_COPT;
-const pcre *yield;
-const uschar *error;
-if (use_malloc)
- {
- pcre_malloc = function_store_malloc;
- pcre_free = function_store_free;
- }
-if (caseless) options |= PCRE_CASELESS;
-yield = pcre_compile(CCS pattern, options, CCSS &error, &offset, NULL);
-pcre_malloc = function_store_get;
-pcre_free = function_dummy_free;
-if (yield == NULL)
- log_write(0, LOG_MAIN|LOG_PANIC_DIE, "regular expression error: "
- "%s at offset %d while compiling %s", error, offset, pattern);
-return yield;
+pcre_gen_mtc_ctx = pcre2_match_context_create(pcre_gen_ctx);
}
*************************************************/
/* This function runs a regular expression match, and sets up the pointers to
-the matched substrings.
+the matched substrings. The matched strings are copied so the lifetime of
+the subject is not a problem. Matched strings will have the same taint status
+as the subject string (this is not a de-taint method, and must not be made so
+given the support for wildcards in REs).
Arguments:
re the compiled expression
if >= 0 setup from setup+1 onwards,
excluding the full matched string
-Returns: TRUE or FALSE
+Returns: TRUE if matched, or FALSE
*/
BOOL
-regex_match_and_setup(const pcre *re, const uschar *subject, int options, int setup)
+regex_match_and_setup(const pcre2_code * re, const uschar * subject, int options, int setup)
{
-int ovector[3*(EXPAND_MAXN+1)];
-uschar * s = string_copy(subject); /* de-constifying */
-int n = pcre_exec(re, NULL, CS s, Ustrlen(s), 0,
- PCRE_EOPT | options, ovector, nelem(ovector));
-BOOL yield = n >= 0;
-if (n == 0) n = EXPAND_MAXN + 1;
-if (yield)
+pcre2_match_data * md = pcre2_match_data_create_from_pattern(re, pcre_gen_ctx);
+int res = pcre2_match(re, (PCRE2_SPTR)subject, PCRE2_ZERO_TERMINATED, 0,
+ PCRE_EOPT | options, md, pcre_gen_mtc_ctx);
+BOOL yield;
+
+if ((yield = (res >= 0)))
{
+ PCRE2_SIZE * ovec = pcre2_get_ovector_pointer(md);
+ res = pcre2_get_ovector_count(md);
expand_nmax = setup < 0 ? 0 : setup + 1;
- for (int nn = setup < 0 ? 0 : 2; nn < n*2; nn += 2)
+ for (int matchnum = setup < 0 ? 0 : 1; matchnum < res; matchnum++)
{
- expand_nstring[expand_nmax] = s + ovector[nn];
- expand_nlength[expand_nmax++] = ovector[nn+1] - ovector[nn];
+ /* Although PCRE2 has a pcre2_substring_get_bynumber() conveneience, it
+ seems to return a bad pointer when a capture group had no data, eg. (.*)
+ matching zero letters. So use the underlying ovec and hope (!) that the
+ offsets are sane (including that case). Should we go further and range-
+ check each one vs. the subject string length? */
+ int off = matchnum * 2;
+ int len = ovec[off + 1] - ovec[off];
+ expand_nstring[expand_nmax] = string_copyn(subject + ovec[off], len);
+ expand_nlength[expand_nmax++] = len;
}
expand_nmax--;
}
+else if (res != PCRE2_ERROR_NOMATCH) DEBUG(D_any)
+ {
+ uschar errbuf[128];
+ pcre2_get_error_message(res, errbuf, sizeof(errbuf));
+ debug_printf_indent("pcre2: %s\n", errbuf);
+ }
+/* pcre2_match_data_free(md); gen ctx needs no free */
return yield;
}
+/* Check just for match with regex. Uses the common memory-handling.
+
+Arguments:
+ re compiled regex
+ subject string to be checked
+ slen length of subject; -1 for nul-terminated
+ rptr pointer for matched string, copied, or NULL
+
+Return: TRUE for a match.
+*/
+
+BOOL
+regex_match(const pcre2_code * re, const uschar * subject, int slen, uschar ** rptr)
+{
+pcre2_match_data * md = pcre2_match_data_create(1, pcre_gen_ctx);
+int rc = pcre2_match(re, (PCRE2_SPTR)subject,
+ slen >= 0 ? slen : PCRE2_ZERO_TERMINATED,
+ 0, PCRE_EOPT, md, pcre_gen_mtc_ctx);
+PCRE2_SIZE * ovec = pcre2_get_ovector_pointer(md);
+BOOL ret = FALSE;
+
+if (rc >= 0)
+ {
+ if (rptr)
+ *rptr = string_copyn(subject + ovec[0], ovec[1] - ovec[0]);
+ ret = TRUE;
+ }
+/* pcre2_match_data_free(md); gen ctx needs no free */
+return ret;
+}
+
/*************************************************
}
+/***********************************************
+* Handler for SIGSEGV *
+***********************************************/
+
+#define STACKDUMP_MAX 24
+void
+stackdump(void)
+{
+#ifndef NO_EXECINFO
+void * buf[STACKDUMP_MAX];
+char ** ss;
+int nptrs = backtrace(buf, STACKDUMP_MAX);
+
+log_write(0, LOG_MAIN|LOG_PANIC, "backtrace");
+log_write(0, LOG_MAIN|LOG_PANIC, "---");
+if ((ss = backtrace_symbols(buf, nptrs)))
+ {
+ for (int i = 0; i < nptrs; i++)
+ log_write(0, LOG_MAIN|LOG_PANIC, "\t%s", ss[i]);
+ free(ss);
+ }
+else
+ log_write(0, LOG_MAIN|LOG_PANIC, "backtrace_symbols: %s", strerror(errno));
+log_write(0, LOG_MAIN|LOG_PANIC, "---");
+#endif
+}
+#undef STACKDUMP_MAX
+
+
+static void
+#ifdef SA_SIGINFO
+segv_handler(int sig, siginfo_t * info, void * uctx)
+{
+log_write(0, LOG_MAIN|LOG_PANIC, "SIGSEGV (fault address: %p)", info->si_addr);
+# if defined(SEGV_MAPERR) && defined(SEGV_ACCERR) && defined(SEGV_BNDERR) && defined(SEGV_PKUERR)
+switch (info->si_code)
+ {
+ case SEGV_MAPERR: log_write(0, LOG_MAIN|LOG_PANIC, "SEGV_MAPERR"); break;
+ case SEGV_ACCERR: log_write(0, LOG_MAIN|LOG_PANIC, "SEGV_ACCERR"); break;
+ case SEGV_BNDERR: log_write(0, LOG_MAIN|LOG_PANIC, "SEGV_BNDERR"); break;
+ case SEGV_PKUERR: log_write(0, LOG_MAIN|LOG_PANIC, "SEGV_PKUERR"); break;
+ }
+# endif
+if (US info->si_addr < US 4096)
+ log_write(0, LOG_MAIN|LOG_PANIC, "SIGSEGV (null pointer indirection)");
+else
+ log_write(0, LOG_MAIN|LOG_PANIC, "SIGSEGV (maybe attempt to write to immutable memory)");
+if (process_info_len > 0)
+ log_write(0, LOG_MAIN|LOG_PANIC, "SIGSEGV (%.*s)", process_info_len, process_info);
+stackdump();
+signal(SIGSEGV, SIG_DFL);
+kill(getpid(), sig);
+}
+
+#else
+segv_handler(int sig)
+{
+log_write(0, LOG_MAIN|LOG_PANIC, "SIGSEGV (maybe attempt to write to immutable memory)");
+if (process_info_len > 0)
+ log_write(0, LOG_MAIN|LOG_PANIC, "SIGSEGV (%.*s)", process_info_len, process_info);
+stackdump();
+signal(SIGSEGV, SIG_DFL);
+kill(getpid(), sig);
+}
+#endif
+
+
/*************************************************
* Handler for SIGUSR1 *
*************************************************/
os_restarting_signal(sig, usr1_handler);
-if ((fd = Uopen(process_log_path, O_APPEND|O_WRONLY, LOG_MODE)) < 0)
- {
- /* If we are already running as the Exim user, try to create it in the
- current process (assuming spool_directory exists). Otherwise, if we are
- root, do the creation in an exim:exim subprocess. */
-
- int euid = geteuid();
- if (euid == exim_uid)
- fd = Uopen(process_log_path, O_CREAT|O_APPEND|O_WRONLY, LOG_MODE);
- else if (euid == root_uid)
- fd = log_create_as_exim(process_log_path);
- }
+if (!process_log_path) return;
+fd = log_open_as_exim(process_log_path);
/* If we are neither exim nor root, or if we failed to create the log file,
give up. There is not much useful we can do with errors, since we don't want
void
sigalrm_handler(int sig)
{
-sig = sig; /* Keep picky compilers happy */
sigalrm_seen = TRUE;
os_non_restarting_signal(SIGALRM, sigalrm_handler);
}
*************************************************/
#ifdef _POSIX_MONOTONIC_CLOCK
-/* Amount CLOCK_MONOTONIC is behind realtime, at startup. */
+# ifdef CLOCK_BOOTTIME
+# define EXIM_CLOCKTYPE CLOCK_BOOTTIME
+# else
+# define EXIM_CLOCKTYPE CLOCK_MONOTONIC
+# endif
+
+/* Amount EXIM_CLOCK is behind realtime, at startup. */
static struct timespec offset_ts;
static void
exim_clock_init(void)
{
struct timeval tv;
-if (clock_gettime(CLOCK_MONOTONIC, &offset_ts) != 0) return;
+if (clock_gettime(EXIM_CLOCKTYPE, &offset_ts) != 0) return;
(void)gettimeofday(&tv, NULL);
offset_ts.tv_sec = tv.tv_sec - offset_ts.tv_sec;
offset_ts.tv_nsec = tv.tv_usec * 1000 - offset_ts.tv_nsec;
#endif
+void
+exim_gettime(struct timeval * tv)
+{
+#ifdef _POSIX_MONOTONIC_CLOCK
+struct timespec now_ts;
+
+if (clock_gettime(EXIM_CLOCKTYPE, &now_ts) == 0)
+ {
+ now_ts.tv_sec += offset_ts.tv_sec;
+ if ((now_ts.tv_nsec += offset_ts.tv_nsec) >= 1000*1000*1000)
+ {
+ now_ts.tv_sec++;
+ now_ts.tv_nsec -= 1000*1000*1000;
+ }
+ tv->tv_sec = now_ts.tv_sec;
+ tv->tv_usec = now_ts.tv_nsec / 1000;
+ }
+else
+#endif
+ (void)gettimeofday(tv, NULL);
+}
+
+
/* Exim uses a time + a pid to generate a unique identifier in two places: its
message IDs, and in file names for maildir deliveries. Because some OS now
re-use pids within the same second, sub-second times are now being used.
clocks that go backwards.
Arguments:
- tgt_tv A timeval which was used to create uniqueness; its usec field
+ prev_tv A timeval which was used to create uniqueness; its usec field
has been rounded down to the value of the resolution.
We want to be sure the current time is greater than this.
+ On return, updated to current (rounded down).
resolution The resolution that was used to divide the microseconds
(1 for maildir, larger for message ids)
*/
void
-exim_wait_tick(struct timeval * tgt_tv, int resolution)
+exim_wait_tick(struct timeval * prev_tv, int resolution)
{
struct timeval now_tv;
long int now_true_usec;
-#ifdef _POSIX_MONOTONIC_CLOCK
-struct timespec now_ts;
-
-if (clock_gettime(CLOCK_MONOTONIC, &now_ts) == 0)
- {
- now_ts.tv_sec += offset_ts.tv_sec;
- if ((now_ts.tv_nsec += offset_ts.tv_nsec) >= 1000*1000*1000)
- {
- now_ts.tv_sec++;
- now_ts.tv_nsec -= 1000*1000*1000;
- }
- now_tv.tv_sec = now_ts.tv_sec;
- now_true_usec = (now_ts.tv_nsec / (resolution * 1000)) * resolution;
- now_tv.tv_usec = now_true_usec;
- }
-else
-#endif
- {
- (void)gettimeofday(&now_tv, NULL);
- now_true_usec = now_tv.tv_usec;
- now_tv.tv_usec = (now_true_usec/resolution) * resolution;
- }
+exim_gettime(&now_tv);
+now_true_usec = now_tv.tv_usec;
+now_tv.tv_usec = (now_true_usec/resolution) * resolution;
-while (exim_tvcmp(&now_tv, tgt_tv) <= 0)
+while (exim_tvcmp(&now_tv, prev_tv) <= 0)
{
struct itimerval itval;
itval.it_interval.tv_sec = 0;
itval.it_interval.tv_usec = 0;
- itval.it_value.tv_sec = tgt_tv->tv_sec - now_tv.tv_sec;
- itval.it_value.tv_usec = tgt_tv->tv_usec + resolution - now_true_usec;
+ itval.it_value.tv_sec = prev_tv->tv_sec - now_tv.tv_sec;
+ itval.it_value.tv_usec = prev_tv->tv_usec + resolution - now_true_usec;
/* We know that, overall, "now" is less than or equal to "then". Therefore, a
negative value for the microseconds is possible only in the case when "now"
if (!f.running_in_test_harness)
{
debug_printf("tick check: " TIME_T_FMT ".%06lu " TIME_T_FMT ".%06lu\n",
- tgt_tv->tv_sec, (long) tgt_tv->tv_usec,
+ prev_tv->tv_sec, (long) prev_tv->tv_usec,
now_tv.tv_sec, (long) now_tv.tv_usec);
debug_printf("waiting " TIME_T_FMT ".%06lu sec\n",
itval.it_value.tv_sec, (long) itval.it_value.tv_usec);
/* Be prapared to go around if the kernel does not implement subtick
granularity (GNU Hurd) */
- (void)gettimeofday(&now_tv, NULL);
+ exim_gettime(&now_tv);
now_true_usec = now_tv.tv_usec;
now_tv.tv_usec = (now_true_usec/resolution) * resolution;
}
+*prev_tv = now_tv;
}
{
if (devnull < 0) devnull = open("/dev/null", O_RDWR);
if (devnull < 0) log_write(0, LOG_MAIN|LOG_PANIC_DIE, "%s",
- string_open_failed(errno, "/dev/null", NULL));
+ string_open_failed("/dev/null", NULL));
if (devnull != i) (void)dup2(devnull, i);
}
}
*/
void
-exim_setugid(uid_t uid, gid_t gid, BOOL igflag, uschar *msg)
+exim_setugid(uid_t uid, gid_t gid, BOOL igflag, const uschar * msg)
{
uid_t euid = geteuid();
gid_t egid = getegid();
exit(EXIT_FAILURE);
}
+/* fail if a length is too long */
+static inline void
+exim_len_fail_toolong(int itemlen, int maxlen, const char *description)
+{
+if (itemlen <= maxlen)
+ return;
+fprintf(stderr, "exim: length limit exceeded (%d > %d) for: %s\n",
+ itemlen, maxlen, description);
+exit(EXIT_FAILURE);
+}
+
+/* only pass through the string item back to the caller if it's short enough */
+static inline const uschar *
+exim_str_fail_toolong(const uschar *item, int maxlen, const char *description)
+{
+exim_len_fail_toolong(Ustrlen(item), maxlen, description);
+return item;
+}
+
/* exim_chown_failure() called from exim_chown()/exim_fchown() on failure
of chown()/fchown(). See src/functions.h for more explanation */
int
int rc = verify_address(deliver_make_addr(address,TRUE), stdout, flags, -1,
-1, -1, NULL, NULL, NULL);
if (rc == FAIL) *exit_value = 2;
- else if (rc == DEFER && *exit_value == 0) *exit_value = 1;
+ else if (rc == DEFER && *exit_value == 0) *exit_value = 1;
}
}
*************************************************/
static void
-show_db_version(FILE * f)
+show_string(BOOL is_stdout, gstring * g)
+{
+const uschar * s = string_from_gstring(g);
+if (s)
+ if (is_stdout) fputs(CCS s, stdout);
+ else debug_printf("%s", s);
+}
+
+
+static gstring *
+show_db_version(gstring * g)
{
#ifdef DB_VERSION_STRING
DEBUG(D_any)
{
- fprintf(f, "Library version: BDB: Compile: %s\n", DB_VERSION_STRING);
- fprintf(f, " Runtime: %s\n",
+ g = string_fmt_append(g, "Library version: BDB: Compile: %s\n", DB_VERSION_STRING);
+ g = string_fmt_append(g, " Runtime: %s\n",
db_version(NULL, NULL, NULL));
}
else
- fprintf(f, "Berkeley DB: %s\n", DB_VERSION_STRING);
+ g = string_fmt_append(g, "Berkeley DB: %s\n", DB_VERSION_STRING);
#elif defined(BTREEVERSION) && defined(HASHVERSION)
- #ifdef USE_DB
- fprintf(f, "Probably Berkeley DB version 1.8x (native mode)\n");
- #else
- fprintf(f, "Probably Berkeley DB version 1.8x (compatibility mode)\n");
- #endif
+# ifdef USE_DB
+ g = string_cat(g, US"Probably Berkeley DB version 1.8x (native mode)\n");
+# else
+ g = string_cat(g, US"Probably Berkeley DB version 1.8x (compatibility mode)\n");
+# endif
#elif defined(_DBM_RDONLY) || defined(dbm_dirfno)
-fprintf(f, "Probably ndbm\n");
+g = string_cat(g, US"Probably ndbm\n");
#elif defined(USE_TDB)
-fprintf(f, "Using tdb\n");
+g = string_cat(g, US"Using tdb\n");
#else
- #ifdef USE_GDBM
- fprintf(f, "Probably GDBM (native mode)\n");
- #else
- fprintf(f, "Probably GDBM (compatibility mode)\n");
- #endif
+# ifdef USE_GDBM
+ g = string_cat(g, US"Probably GDBM (native mode)\n");
+# else
+ g = string_cat(g, US"Probably GDBM (compatibility mode)\n");
+# endif
#endif
+return g;
}
/* This function is called for -bV/--version and for -d to output the optional
features of the current Exim binary.
-Arguments: a FILE for printing
+Arguments: BOOL, true for stdout else debug channel
Returns: nothing
*/
static void
-show_whats_supported(FILE * fp)
+show_whats_supported(BOOL is_stdout)
{
rmark reset_point = store_mark();
-gstring * g;
-DEBUG(D_any) {} else show_db_version(fp);
+gstring * g = NULL;
-g = string_cat(NULL, US"Support for:");
+DEBUG(D_any) {} else g = show_db_version(g);
+
+g = string_cat(g, US"Support for:");
#ifdef SUPPORT_CRYPTEQ
g = string_cat(g, US" crypteq");
#endif
g = string_cat(g, US" OCSP");
#endif
#ifndef DISABLE_PIPE_CONNECT
- g = string_cat(g, US" PIPE_CONNECT");
+ g = string_cat(g, US" PIPECONNECT");
#endif
#ifndef DISABLE_PRDR
g = string_cat(g, US" PRDR");
g = string_cat(g, US" PROXY");
#endif
#ifndef DISABLE_QUEUE_RAMP
- g = string_cat(g, US" Experimental_Queue_Ramp");
+ g = string_cat(g, US" Queue_Ramp");
#endif
#ifdef SUPPORT_SOCKS
g = string_cat(g, US" SOCKS");
#ifdef EXPERIMENTAL_DSN_INFO
g = string_cat(g, US" Experimental_DSN_info");
#endif
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+ g = string_cat(g, US" Experimental_ESMTP_Limits");
+#endif
#ifdef EXPERIMENTAL_QUEUEFILE
g = string_cat(g, US" Experimental_QUEUEFILE");
#endif
-#if defined(EXPERIMENTAL_SRS_ALT)
- g = string_cat(g, US" Experimental_SRS");
-#endif
g = string_cat(g, US"\n");
g = string_cat(g, US"Lookups (built-in):");
#ifdef WITH_CONTENT_SCAN
g = malware_show_supported(g);
#endif
+show_string(is_stdout, g); g = NULL;
if (fixed_never_users[0] > 0)
{
}
g = string_fmt_append(g, "Configure owner: %d:%d\n", config_uid, config_gid);
-fputs(CS string_from_gstring(g), fp);
-fprintf(fp, "Size of off_t: " SIZE_T_FMT "\n", sizeof(off_t));
+g = string_fmt_append(g, "Size of off_t: " SIZE_T_FMT "\n", sizeof(off_t));
/* Everything else is details which are only worth reporting when debugging.
Perhaps the tls_version_report should move into this too. */
-DEBUG(D_any) do {
+DEBUG(D_any)
+ {
/* clang defines __GNUC__ (at least, for me) so test for it first */
#if defined(__clang__)
- fprintf(fp, "Compiler: CLang [%s]\n", __clang_version__);
+ g = string_fmt_append(g, "Compiler: CLang [%s]\n", __clang_version__);
#elif defined(__GNUC__)
- fprintf(fp, "Compiler: GCC [%s]\n",
+ g = string_fmt_append(g, "Compiler: GCC [%s]\n",
# ifdef __VERSION__
__VERSION__
# else
# endif
);
#else
- fprintf(fp, "Compiler: <unknown>\n");
+ g = string_cat(g, US"Compiler: <unknown>\n");
#endif
#if defined(__GLIBC__) && !defined(__UCLIBC__)
- fprintf(fp, "Library version: Glibc: Compile: %d.%d\n",
+ g = string_fmt_append(g, "Library version: Glibc: Compile: %d.%d\n",
__GLIBC__, __GLIBC_MINOR__);
if (__GLIBC_PREREQ(2, 1))
- fprintf(fp, " Runtime: %s\n",
+ g = string_fmt_append(g, " Runtime: %s\n",
gnu_get_libc_version());
#endif
-show_db_version(fp);
+g = show_db_version(g);
#ifndef DISABLE_TLS
- tls_version_report(fp);
+ g = tls_version_report(g);
#endif
#ifdef SUPPORT_I18N
- utf8_version_report(fp);
+ g = utf8_version_report(g);
+#endif
+#ifdef SUPPORT_DMARC
+ g = dmarc_version_report(g);
#endif
#ifdef SUPPORT_SPF
- spf_lib_version_report(fp);
+ g = spf_lib_version_report(g);
#endif
- for (auth_info * authi = auths_available; *authi->driver_name != '\0'; ++authi)
- if (authi->version_report)
- (*authi->version_report)(fp);
+show_string(is_stdout, g);
+g = NULL;
+
+for (auth_info * authi = auths_available; *authi->driver_name != '\0'; ++authi)
+ if (authi->version_report)
+ g = (*authi->version_report)(g);
/* PCRE_PRERELEASE is either defined and empty or a bare sequence of
characters; unless it's an ancient version of PCRE in which case it
#endif
#define QUOTE(X) #X
#define EXPAND_AND_QUOTE(X) QUOTE(X)
- fprintf(fp, "Library version: PCRE: Compile: %d.%d%s\n"
- " Runtime: %s\n",
- PCRE_MAJOR, PCRE_MINOR,
- EXPAND_AND_QUOTE(PCRE_PRERELEASE) "",
- pcre_version());
+ {
+ uschar buf[24];
+ pcre2_config(PCRE2_CONFIG_VERSION, buf);
+ g = string_fmt_append(g, "Library version: PCRE2: Compile: %d.%d%s\n"
+ " Runtime: %s\n",
+ PCRE2_MAJOR, PCRE2_MINOR,
+ EXPAND_AND_QUOTE(PCRE2_PRERELEASE) "",
+ buf);
+ }
#undef QUOTE
#undef EXPAND_AND_QUOTE
- init_lookup_list();
- for (int i = 0; i < lookup_list_count; i++)
- if (lookup_list[i]->version_report)
- lookup_list[i]->version_report(fp);
+show_string(is_stdout, g);
+g = NULL;
+
+init_lookup_list();
+for (int i = 0; i < lookup_list_count; i++)
+ if (lookup_list[i]->version_report)
+ g = lookup_list[i]->version_report(g);
+show_string(is_stdout, g);
+g = NULL;
#ifdef WHITELIST_D_MACROS
- fprintf(fp, "WHITELIST_D_MACROS: \"%s\"\n", WHITELIST_D_MACROS);
+ g = string_fmt_append(g, "WHITELIST_D_MACROS: \"%s\"\n", WHITELIST_D_MACROS);
#else
- fprintf(fp, "WHITELIST_D_MACROS unset\n");
+ g = string_cat(g, US"WHITELIST_D_MACROS unset\n");
#endif
#ifdef TRUSTED_CONFIG_LIST
- fprintf(fp, "TRUSTED_CONFIG_LIST: \"%s\"\n", TRUSTED_CONFIG_LIST);
+ g = string_fmt_append(g, "TRUSTED_CONFIG_LIST: \"%s\"\n", TRUSTED_CONFIG_LIST);
#else
- fprintf(fp, "TRUSTED_CONFIG_LIST unset\n");
+ g = string_cat(g, US"TRUSTED_CONFIG_LIST unset\n");
#endif
+ }
-} while (0);
+show_string(is_stdout, g);
store_reset(reset_point);
}
get_stdinput(char *(*fn_readline)(const char *), void(*fn_addhist)(const char *))
{
gstring * g = NULL;
+BOOL had_input = FALSE;
if (!fn_readline) { printf("> "); fflush(stdout); }
for (int i = 0;; i++)
{
uschar buffer[1024];
- uschar *p, *ss;
+ uschar * p, * ss;
- #ifdef USE_READLINE
+#ifdef USE_READLINE
char *readline_line = NULL;
if (fn_readline)
{
if (!(readline_line = fn_readline((i > 0)? "":"> "))) break;
- if (*readline_line != 0 && fn_addhist) fn_addhist(readline_line);
+ if (*readline_line && fn_addhist) fn_addhist(readline_line);
p = US readline_line;
}
else
- #endif
+#endif
/* readline() not in use */
{
- if (Ufgets(buffer, sizeof(buffer), stdin) == NULL) break;
+ if (Ufgets(buffer, sizeof(buffer), stdin) == NULL) break; /*EOF*/
p = buffer;
}
/* Handle the line */
- ss = p + (int)Ustrlen(p);
- while (ss > p && isspace(ss[-1])) ss--;
+ had_input = TRUE;
+ ss = p + Ustrlen(p);
+ while (ss > p && isspace(ss[-1])) ss--; /* strip trailing newline (and spaces) */
if (i > 0)
- while (p < ss && isspace(*p)) p++; /* leading space after cont */
+ while (p < ss && isspace(*p)) p++; /* strip leading space after cont */
g = string_catn(g, p, ss - p);
- #ifdef USE_READLINE
+#ifdef USE_READLINE
if (fn_readline) free(readline_line);
- #endif
+#endif
/* g can only be NULL if ss==p */
- if (ss == p || g->s[g->ptr-1] != '\\')
+ if (ss == p || g->s[g->ptr-1] != '\\') /* not continuation; done */
break;
- --g->ptr;
- (void) string_from_gstring(g);
+ --g->ptr; /* drop the \ */
}
-if (!g) printf("\n");
-return string_from_gstring(g);
+if (had_input) return g ? string_from_gstring(g) : US"";
+printf("\n");
+return NULL;
}
continue;
if ((len = m->replen) == 0)
continue;
- n = pcre_exec(regex_whitelisted_macro, NULL, CS m->replacement, len,
- 0, PCRE_EOPT, NULL, 0);
- if (n < 0)
- {
- if (n != PCRE_ERROR_NOMATCH)
- debug_printf("macros_trusted checking %s returned %d\n", m->name, n);
+ if (!regex_match(regex_whitelisted_macro, m->replacement, len, NULL))
return FALSE;
- }
}
DEBUG(D_any) debug_printf("macros_trusted overridden to true by whitelisting\n");
return TRUE;
*/
static void
-expansion_test_line(uschar * line)
+expansion_test_line(const uschar * line)
{
int len;
BOOL dummy_macexp;
+uschar * s;
Ustrncpy(big_buffer, line, big_buffer_size);
big_buffer[big_buffer_size-1] = '\0';
if (macro_read_assignment(big_buffer))
printf("Defined macro '%s'\n", mlast->name);
}
+else if (Ustrncmp(big_buffer, "set ", 4) == 0)
+ printf("%s\n", acl_standalone_setvar(big_buffer+4));
else
- if ((line = expand_string(big_buffer))) printf("%s\n", CS line);
+ if ((s = expand_string(big_buffer))) printf("%s\n", CS s);
else printf("Failed: %s\n", expand_string_message);
}
int list_queue_option = 0;
int msg_action = 0;
int msg_action_arg = -1;
-int namelen = (argv[0] == NULL)? 0 : Ustrlen(argv[0]);
+int namelen = argv[0] ? Ustrlen(argv[0]) : 0;
int queue_only_reason = 0;
#ifdef EXIM_PERL
int perl_start_option = 0;
BOOL list_options = FALSE;
BOOL list_config = FALSE;
BOOL local_queue_only;
-BOOL more = TRUE;
BOOL one_msg_action = FALSE;
BOOL opt_D_used = FALSE;
BOOL queue_only_set = FALSE;
BOOL usage_wanted = FALSE;
BOOL verify_address_mode = FALSE;
BOOL verify_as_sender = FALSE;
+BOOL rcpt_verify_quota = FALSE;
BOOL version_printed = FALSE;
uschar *alias_arg = NULL;
uschar *called_as = US"";
uschar *start_queue_run_id = NULL;
uschar *stop_queue_run_id = NULL;
uschar *expansion_test_message = NULL;
-uschar *ftest_domain = NULL;
-uschar *ftest_localpart = NULL;
-uschar *ftest_prefix = NULL;
-uschar *ftest_suffix = NULL;
+const uschar *ftest_domain = NULL;
+const uschar *ftest_localpart = NULL;
+const uschar *ftest_prefix = NULL;
+const uschar *ftest_suffix = NULL;
uschar *log_oneline = NULL;
uschar *malware_test_file = NULL;
uschar *real_sender_address;
(void)gettimeofday(×tamp_startup, NULL);
#endif
+store_init(); /* Initialise the memory allocation susbsystem */
+pcre_init(); /* Set up memory handling for pcre */
+
/* If the Exim user and/or group and/or the configuration file owner/group were
defined by ref:name at build time, we must now find the actual uid/gid values.
This is a feature to make the lives of binary distributors easier. */
if (f.running_in_test_harness)
debug_store = TRUE;
+/* Protect against abusive argv[0] */
+if (!argv[0] || !argc) exim_fail("exim: executable name required\n");
+exim_str_fail_toolong(argv[0], PATH_MAX, "argv[0]");
+
/* The C standard says that the equivalent of setlocale(LC_ALL, "C") is obeyed
at the start of a program; however, it seems that some environments do not
follow this. A "strange" locale can affect the formatting of timestamps, so we
setlocale(LC_ALL, "C");
-/* Get the offset between CLOCK_MONOTONIC and wallclock */
+/* Get the offset between CLOCK_MONOTONIC/CLOCK_BOOTTIME and wallclock */
#ifdef _POSIX_MONOTONIC_CLOCK
exim_clock_init();
if (fstat(fileno(stderr), &statbuf) >= 0) log_stderr = stderr;
-/* Arrange for the PCRE regex library to use our store functions. Note that
-the normal calls are actually macros that add additional arguments for
-debugging purposes so we have to assign specially constructed functions here.
-The default is to use store in the stacking pool, but this is overridden in the
-regex_must_compile() function. */
-
-pcre_malloc = function_store_get;
-pcre_free = function_dummy_free;
-
/* Ensure there is a big buffer for temporary use in several places. It is put
in malloc store so that it can be freed for enlargement if necessary. */
/* Set up the handler for the data request signal, and set the initial
descriptive text. */
-process_info = store_get(PROCESS_INFO_SIZE, TRUE); /* tainted */
+process_info = store_get(PROCESS_INFO_SIZE, GET_TAINTED);
set_process_info("initializing");
-os_restarting_signal(SIGUSR1, usr1_handler);
+os_restarting_signal(SIGUSR1, usr1_handler); /* exiwhat */
+#ifdef SA_SIGINFO
+ {
+ struct sigaction act = { .sa_sigaction = segv_handler, .sa_flags = SA_RESETHAND | SA_SIGINFO };
+ sigaction(SIGSEGV, &act, NULL);
+ }
+#else
+signal(SIGSEGV, segv_handler); /* log faults */
+#endif
/* If running in a dockerized environment, the TERM signal is only
delegated to the PID 1 if we request it by setting an signal handler */
using mac_ismsgid, which uses this. */
regex_ismsgid =
- regex_must_compile(US"^(?:[^\\W_]{6}-){2}[^\\W_]{2}$", FALSE, TRUE);
+ regex_must_compile(US"^(?:[^\\W_]{6}-){2}[^\\W_]{2}$", MCS_NOFLAGS, TRUE);
/* Precompile the regular expression that is used for matching an SMTP error
code, possibly extended, at the start of an error message. Note that the
regex_smtp_code =
regex_must_compile(US"^\\d\\d\\d\\s(?:\\d\\.\\d\\d?\\d?\\.\\d\\d?\\d?\\s)?",
- FALSE, TRUE);
+ MCS_NOFLAGS, TRUE);
#ifdef WHITELIST_D_MACROS
/* Precompile the regular expression used to filter the content of macros
given to -D for permissibility. */
regex_whitelisted_macro =
- regex_must_compile(US"^[A-Za-z0-9_/.-]*$", FALSE, TRUE);
+ regex_must_compile(US"^[A-Za-z0-9_/.-]*$", MCS_NOFLAGS, TRUE);
#endif
-for (i = 0; i < REGEX_VARS; i++) regex_vars[i] = NULL;
-
/* If the program is called as "mailq" treat it as equivalent to "exim -bp";
this seems to be a generally accepted convention, since one finds symbolic
links called "mailq" in standard OS configurations. */
-bdf: Ditto, but in the foreground.
*/
case 'd':
- f.daemon_listen = TRUE;
+ f.daemon_listen = f.daemon_scion = TRUE;
if (*argrest == 'f') f.background_daemon = FALSE;
else if (*argrest) badarg = TRUE;
break;
{
if (++i >= argc)
exim_fail("exim: string expected after %s\n", arg);
- if (Ustrcmp(argrest, "d") == 0) ftest_domain = argv[i];
- else if (Ustrcmp(argrest, "l") == 0) ftest_localpart = argv[i];
- else if (Ustrcmp(argrest, "p") == 0) ftest_prefix = argv[i];
- else if (Ustrcmp(argrest, "s") == 0) ftest_suffix = argv[i];
+ if (Ustrcmp(argrest, "d") == 0) ftest_domain = exim_str_fail_toolong(argv[i], EXIM_DOMAINNAME_MAX, "-bfd");
+ else if (Ustrcmp(argrest, "l") == 0) ftest_localpart = exim_str_fail_toolong(argv[i], EXIM_LOCALPART_MAX, "-bfl");
+ else if (Ustrcmp(argrest, "p") == 0) ftest_prefix = exim_str_fail_toolong(argv[i], EXIM_LOCALPART_MAX, "-bfp");
+ else if (Ustrcmp(argrest, "s") == 0) ftest_suffix = exim_str_fail_toolong(argv[i], EXIM_LOCALPART_MAX, "-bfs");
else badarg = TRUE;
}
break;
if (!*argrest || Ustrcmp(argrest, "c") == 0)
{
if (++i >= argc) { badarg = TRUE; break; }
- sender_host_address = string_copy_taint(argv[i], TRUE);
+ sender_host_address = string_copy_taint(
+ exim_str_fail_toolong(argv[i], EXIM_IPADDR_MAX, "-bh"),
+ GET_TAINTED);
host_checking = checking = f.log_testing_mode = TRUE;
f.host_checking_callout = *argrest == 'c';
message_logs = FALSE;
concept of *the* alias file, but since Sun's YP make script calls
sendmail this way, some support must be provided. */
case 'i':
- if (!*++argrest) bi_option = TRUE;
+ if (!*argrest) bi_option = TRUE;
else badarg = TRUE;
break;
case 'P':
/* -bP config: we need to setup here, because later,
- * when list_options is checked, the config is read already */
+ when list_options is checked, the config is read already */
if (*argrest)
badarg = TRUE;
else if (argv[i+1] && Ustrcmp(argv[i+1], "config") == 0)
version_cnumber, version_date);
printf("%s\n", CS version_copyright);
version_printed = TRUE;
- show_whats_supported(stdout);
+ show_whats_supported(TRUE);
f.log_testing_mode = TRUE;
}
else badarg = TRUE;
case 'w':
f.inetd_wait_mode = TRUE;
f.background_daemon = FALSE;
- f.daemon_listen = TRUE;
+ f.daemon_listen = f.daemon_scion = TRUE;
if (*argrest)
if ((inetd_wait_timeout = readconf_readtime(argrest, 0, FALSE)) <= 0)
exim_fail("exim: bad time value %s: abandoned\n", argv[i]);
int len = Ustrlen(ALT_CONFIG_PREFIX);
const uschar *list = argrest;
uschar *filename;
+ /* The argv is untainted, so big_buffer (also untainted) is ok to use */
while((filename = string_nextinlist(&list, &sep, big_buffer,
big_buffer_size)))
if ( ( Ustrlen(filename) < len
#endif
break;
- /* -d: Set debug level (see also -v below) or set the drop_cr option.
- The latter is now a no-op, retained for compatibility only. If -dd is used,
- debugging subprocesses of the daemon is disabled. */
-
case 'd':
+
+ /* -dropcr: Set this option. Now a no-op, retained for compatibility only. */
+
if (Ustrcmp(argrest, "ropcr") == 0)
{
/* drop_cr = TRUE; */
}
- /* Use an intermediate variable so that we don't set debugging while
- decoding the debugging bits. */
+ /* -dp: Set up a debug pretrigger buffer with given size. */
+
+ else if (Ustrcmp(argrest, "p") == 0)
+ if (++i >= argc)
+ badarg = TRUE;
+ else
+ debug_pretrigger_setup(argv[i]);
+
+ /* -dt: Set a debug trigger selector */
+
+ else if (Ustrncmp(argrest, "t=", 2) == 0)
+ dtrigger_selector = (unsigned int) Ustrtol(argrest + 2, NULL, 0);
+
+ /* -d: Set debug level (see also -v below).
+ If -dd is used, debugging subprocesses of the daemon is disabled. */
else
{
+ /* Use an intermediate variable so that we don't set debugging while
+ decoding the debugging bits. */
+
unsigned int selector = D_default;
debug_selector = 0;
debug_file = NULL;
case 'F':
if (!*argrest)
if (++i < argc) argrest = argv[i]; else { badarg = TRUE; break; }
- originator_name = string_copy_taint(argrest, TRUE);
+ originator_name = string_copy_taint(
+ exim_str_fail_toolong(argrest, EXIM_HUMANNAME_MAX, "-F"),
+ GET_TAINTED);
f.sender_name_forced = TRUE;
break;
uschar *errmess;
if (!*argrest)
if (i+1 < argc) argrest = argv[++i]; else { badarg = TRUE; break; }
+ (void) exim_str_fail_toolong(argrest, EXIM_DISPLAYMAIL_MAX, "-f");
if (!*argrest)
- *(sender_address = store_get(1, FALSE)) = '\0'; /* Ensure writeable memory */
+ *(sender_address = store_get(1, GET_UNTAINTED)) = '\0'; /* Ensure writeable memory */
else
{
uschar * temp = argrest + Ustrlen(argrest) - 1;
&dummy_start, &dummy_end, &sender_address_domain, TRUE)))
exim_fail("exim: bad -f address \"%s\": %s\n", argrest, errmess);
- sender_address = string_copy_taint(sender_address, TRUE);
+ sender_address = string_copy_taint(sender_address, GET_TAINTED);
#ifdef SUPPORT_I18N
message_smtputf8 = string_is_utf8(sender_address);
allow_utf8_domains = FALSE;
exim_fail("exim: the -L syslog name is too long: \"%s\"\n", argrest);
if (sz < 1)
exim_fail("exim: the -L syslog name is too short\n");
- cmdline_syslog_name = string_copy_taint(argrest, TRUE);
+ cmdline_syslog_name = string_copy_taint(argrest, GET_TAINTED);
break;
case 'M':
if (msg_action_arg >= 0)
exim_fail("exim: incompatible arguments\n");
- continue_transport = string_copy_taint(argv[++i], TRUE);
- continue_hostname = string_copy_taint(argv[++i], TRUE);
- continue_host_address = string_copy_taint(argv[++i], TRUE);
+ continue_transport = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_DRIVERNAME_MAX, "-C internal transport"),
+ GET_TAINTED);
+ continue_hostname = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_HOSTNAME_MAX, "-C internal hostname"),
+ GET_TAINTED);
+ continue_host_address = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_IPADDR_MAX, "-C internal hostaddr"),
+ GET_TAINTED);
continue_sequence = Uatoi(argv[++i]);
msg_action = MSG_DELIVER;
msg_action_arg = ++i;
/* -MCd: for debug, set a process-purpose string */
case 'd': if (++i < argc)
- process_purpose = string_copy_taint(argv[i], TRUE);
+ process_purpose = string_copy_taint(
+ exim_str_fail_toolong(argv[i], EXIM_DRIVERNAME_MAX, "-MCd"),
+ GET_TAINTED);
else badarg = TRUE;
break;
- /* -MCG: set the queue name, to a non-default value */
+ /* -MCG: set the queue name, to a non-default value. Arguably, anything
+ from the commandline should be tainted - but we will need an untainted
+ value for the spoolfile when doing a -odi delivery process. */
- case 'G': if (++i < argc) queue_name = string_copy_taint(argv[i], TRUE);
+ case 'G': if (++i < argc) queue_name = string_copy_taint(
+ exim_str_fail_toolong(argv[i], EXIM_DRIVERNAME_MAX, "-MCG"),
+ GET_UNTAINTED);
else badarg = TRUE;
break;
case 'K': smtp_peer_options |= OPTION_CHUNKING; break;
+#ifdef EXPERIMENTAL_ESMTP_LIMITS
+ /* -MCL: peer used LIMITS RCPTMAX and/or RCPTDOMAINMAX */
+ case 'L': if (++i < argc) continue_limit_mail = Uatoi(argv[i]);
+ else badarg = TRUE;
+ if (++i < argc) continue_limit_rcpt = Uatoi(argv[i]);
+ else badarg = TRUE;
+ if (++i < argc) continue_limit_rcptdom = Uatoi(argv[i]);
+ else badarg = TRUE;
+ break;
+#endif
+
/* -MCP: set the smtp_use_pipelining flag; this is useful only when
it preceded -MC (see above) */
case 'P': smtp_peer_options |= OPTION_PIPE; break;
+#ifdef SUPPORT_SOCKS
+ /* -MCp: Socks proxy in use; nearside IP, port, external IP, port */
+ case 'p': proxy_session = TRUE;
+ if (++i < argc)
+ {
+ proxy_local_address = string_copy_taint(argv[i], GET_TAINTED);
+ if (++i < argc)
+ {
+ proxy_local_port = Uatoi(argv[i]);
+ if (++i < argc)
+ {
+ proxy_external_address = string_copy_taint(argv[i], GET_TAINTED);
+ if (++i < argc)
+ {
+ proxy_external_port = Uatoi(argv[i]);
+ break;
+ } } } }
+ badarg = TRUE;
+ break;
+#endif
/* -MCQ: pass on the pid of the queue-running process that started
this chain of deliveries and the fd of its synchronizing pipe; this
is useful only when it precedes -MC (see above) */
else badarg = TRUE;
break;
+ /* -MCq: do a quota check on the given recipient for the given size
+ of message. Separate from -MC. */
+ case 'q': rcpt_verify_quota = TRUE;
+ if (++i < argc) message_size = Uatoi(argv[i]);
+ else badarg = TRUE;
+ break;
+
/* -MCS: set the smtp_use_size flag; this is useful only when it
precedes -MC (see above) */
case 'S': smtp_peer_options |= OPTION_SIZE; break;
#ifndef DISABLE_TLS
+ /* -MCs: used with -MCt; SNI was sent */
+ /* -MCr: ditto, DANE */
+
+ case 'r':
+ case 's': if (++i < argc)
+ {
+ continue_proxy_sni = string_copy_taint(
+ exim_str_fail_toolong(argv[i], EXIM_HOSTNAME_MAX, "-MCr/-MCs"),
+ GET_TAINTED);
+ if (argrest[1] == 'r') continue_proxy_dane = TRUE;
+ }
+ else badarg = TRUE;
+ break;
+
/* -MCt: similar to -MCT below but the connection is still open
via a proxy process which handles the TLS context and coding.
Require three arguments for the proxied local address and port,
- and the TLS cipher. */
+ and the TLS cipher. */
case 't': if (++i < argc)
- sending_ip_address = string_copy_taint(argv[i], TRUE);
+ sending_ip_address = string_copy_taint(
+ exim_str_fail_toolong(argv[i], EXIM_IPADDR_MAX, "-MCt IP"),
+ GET_TAINTED);
else badarg = TRUE;
if (++i < argc)
sending_port = (int)(Uatol(argv[i]));
else badarg = TRUE;
if (++i < argc)
- continue_proxy_cipher = string_copy_taint(argv[i], TRUE);
+ continue_proxy_cipher = string_copy_taint(
+ exim_str_fail_toolong(argv[i], EXIM_CIPHERNAME_MAX, "-MCt cipher"),
+ GET_TAINTED);
else badarg = TRUE;
/*FALLTHROUGH*/
following options which are followed by a single message id, and which
act on that message. Some of them use the "recipient" addresses as well.
-Mar add recipient(s)
+ -MG move to a different queue
-Mmad mark all recipients delivered
-Mmd mark recipients(s) delivered
-Mes edit sender
else if (Ustrcmp(argrest, "G") == 0)
{
msg_action = MSG_SETQUEUE;
- queue_name_dest = string_copy_taint(argv[++i], TRUE);
- }
- else if (Ustrcmp(argrest, "mad") == 0)
- {
- msg_action = MSG_MARK_ALL_DELIVERED;
+ queue_name_dest = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_DRIVERNAME_MAX, "-MG"),
+ GET_TAINTED);
}
+ else if (Ustrcmp(argrest, "mad") == 0) msg_action = MSG_MARK_ALL_DELIVERED;
else if (Ustrcmp(argrest, "md") == 0)
{
msg_action = MSG_MARK_DELIVERED;
/* -oMa: Set sender host address */
if (Ustrcmp(argrest, "a") == 0)
- sender_host_address = string_copy_taint(argv[++i], TRUE);
+ sender_host_address = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_IPADDR_MAX, "-oMa"),
+ GET_TAINTED);
/* -oMaa: Set authenticator name */
else if (Ustrcmp(argrest, "aa") == 0)
- sender_host_authenticated = string_copy_taint(argv[++i], TRUE);
+ sender_host_authenticated = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_DRIVERNAME_MAX, "-oMaa"),
+ GET_TAINTED);
/* -oMas: setting authenticated sender */
else if (Ustrcmp(argrest, "as") == 0)
- authenticated_sender = string_copy_taint(argv[++i], TRUE);
+ authenticated_sender = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_EMAILADDR_MAX, "-oMas"),
+ GET_TAINTED);
/* -oMai: setting authenticated id */
else if (Ustrcmp(argrest, "ai") == 0)
- authenticated_id = string_copy_taint(argv[++i], TRUE);
+ authenticated_id = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_EMAILADDR_MAX, "-oMai"),
+ GET_TAINTED);
/* -oMi: Set incoming interface address */
else if (Ustrcmp(argrest, "i") == 0)
- interface_address = string_copy_taint(argv[++i], TRUE);
+ interface_address = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_IPADDR_MAX, "-oMi"),
+ GET_TAINTED);
/* -oMm: Message reference */
if (received_protocol)
exim_fail("received_protocol is set already\n");
else
- received_protocol = string_copy_taint(argv[++i], TRUE);
+ received_protocol = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_DRIVERNAME_MAX, "-oMr"),
+ GET_TAINTED);
/* -oMs: Set sender host name */
else if (Ustrcmp(argrest, "s") == 0)
- sender_host_name = string_copy_taint(argv[++i], TRUE);
+ sender_host_name = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_HOSTNAME_MAX, "-oMs"),
+ GET_TAINTED);
/* -oMt: Set sender ident */
else if (Ustrcmp(argrest, "t") == 0)
{
sender_ident_set = TRUE;
- sender_ident = string_copy_taint(argv[++i], TRUE);
+ sender_ident = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], EXIM_IDENTUSER_MAX, "-oMt"),
+ GET_TAINTED);
}
/* Else a bad argument */
-oPX: delete pid file of daemon */
case 'P':
+ if (!f.running_in_test_harness && real_uid != root_uid && real_uid != exim_uid)
+ exim_fail("exim: only uid=%d or uid=%d can use -oP and -oPX "
+ "(uid=%d euid=%d | %d)\n",
+ root_uid, exim_uid, getuid(), geteuid(), real_uid);
if (!*argrest) override_pid_file_path = argv[++i];
else if (Ustrcmp(argrest, "X") == 0) delete_pid_file();
else badarg = TRUE;
break;
/* -oX <list>: Override local_interfaces and/or default daemon ports */
+ /* Limits: Is there a real limit we want here? 1024 is very arbitrary. */
case 'X':
if (*argrest) badarg = TRUE;
- else override_local_interfaces = string_copy_taint(argv[++i], TRUE);
+ else override_local_interfaces = string_copy_taint(
+ exim_str_fail_toolong(argv[++i], 1024, "-oX"),
+ GET_TAINTED);
+ break;
+
+ /* -oY: Override creation of daemon notifier socket */
+
+ case 'Y':
+ if (*argrest) badarg = TRUE;
+ else notifier_socket = NULL;
break;
/* Unknown -o argument */
exim_fail("received_protocol is set already\n");
if (!hn)
- received_protocol = string_copy_taint(argrest, TRUE);
+ received_protocol = string_copy_taint(
+ exim_str_fail_toolong(argrest, EXIM_DRIVERNAME_MAX, "-p<protocol>"),
+ GET_TAINTED);
else
{
- received_protocol = string_copyn_taint(argrest, hn - argrest, TRUE);
- sender_host_name = string_copy_taint(hn + 1, TRUE);
+ (void) exim_str_fail_toolong(argrest, (EXIM_DRIVERNAME_MAX+1+EXIM_HOSTNAME_MAX), "-p<protocol>:<host>");
+ received_protocol = string_copyn_taint(argrest, hn - argrest, GET_TAINTED);
+ sender_host_name = string_copy_taint(hn + 1, GET_TAINTED);
}
}
break;
{
int i;
for (argrest++, i = 0; argrest[i] && argrest[i] != '/'; ) i++;
+ exim_len_fail_toolong(i, EXIM_DRIVERNAME_MAX, "-q*G<name>");
queue_name = string_copyn(argrest, i);
argrest += i;
if (*argrest == '/') argrest++;
{
queue_interval = 0;
if (i+1 < argc && mac_ismsgid(argv[i+1]))
- start_queue_run_id = string_copy_taint(argv[++i], TRUE);
+ start_queue_run_id = string_copy_taint(argv[++i], GET_TAINTED);
if (i+1 < argc && mac_ismsgid(argv[i+1]))
- stop_queue_run_id = string_copy_taint(argv[++i], TRUE);
+ stop_queue_run_id = string_copy_taint(argv[++i], GET_TAINTED);
}
/* -q[f][f][l][G<name>/]<n>: Run the queue at regular intervals, optionally
case 'R': /* Synonymous with -qR... */
- receiving_message = FALSE;
+ {
+ const uschar *tainted_selectstr;
+
+ receiving_message = FALSE;
/* -Rf: As -R (below) but force all deliveries,
-Rff: Ditto, but also thaw all frozen messages,
in all cases provided there are no further characters in this
argument. */
- if (*argrest)
- for (int i = 0; i < nelem(rsopts); i++)
- if (Ustrcmp(argrest, rsopts[i]) == 0)
- {
- if (i != 2) f.queue_run_force = TRUE;
- if (i >= 2) f.deliver_selectstring_regex = TRUE;
- if (i == 1 || i == 4) f.deliver_force_thaw = TRUE;
- argrest += Ustrlen(rsopts[i]);
- }
+ if (*argrest)
+ for (int i = 0; i < nelem(rsopts); i++)
+ if (Ustrcmp(argrest, rsopts[i]) == 0)
+ {
+ if (i != 2) f.queue_run_force = TRUE;
+ if (i >= 2) f.deliver_selectstring_regex = TRUE;
+ if (i == 1 || i == 4) f.deliver_force_thaw = TRUE;
+ argrest += Ustrlen(rsopts[i]);
+ }
/* -R: Set string to match in addresses for forced queue run to
pick out particular messages. */
- if (*argrest)
- deliver_selectstring = string_copy_taint(argrest, TRUE);
- else if (i+1 < argc)
- deliver_selectstring = string_copy_taint(argv[++i], TRUE);
- else
- exim_fail("exim: string expected after -R\n");
+ /* Avoid attacks from people providing very long strings, and do so before
+ we make copies. */
+ if (*argrest)
+ tainted_selectstr = argrest;
+ else if (i+1 < argc)
+ tainted_selectstr = argv[++i];
+ else
+ exim_fail("exim: string expected after -R\n");
+ deliver_selectstring = string_copy_taint(
+ exim_str_fail_toolong(tainted_selectstr, EXIM_EMAILADDR_MAX, "-R"),
+ GET_TAINTED);
+ }
break;
-
/* -r: an obsolete synonym for -f (see above) */
/* -S: Like -R but works on sender. */
case 'S': /* Synonymous with -qS... */
- receiving_message = FALSE;
+ {
+ const uschar *tainted_selectstr;
+
+ receiving_message = FALSE;
/* -Sf: As -S (below) but force all deliveries,
-Sff: Ditto, but also thaw all frozen messages,
in all cases provided there are no further characters in this
argument. */
- if (*argrest)
- for (int i = 0; i < nelem(rsopts); i++)
- if (Ustrcmp(argrest, rsopts[i]) == 0)
- {
- if (i != 2) f.queue_run_force = TRUE;
- if (i >= 2) f.deliver_selectstring_sender_regex = TRUE;
- if (i == 1 || i == 4) f.deliver_force_thaw = TRUE;
- argrest += Ustrlen(rsopts[i]);
- }
+ if (*argrest)
+ for (int i = 0; i < nelem(rsopts); i++)
+ if (Ustrcmp(argrest, rsopts[i]) == 0)
+ {
+ if (i != 2) f.queue_run_force = TRUE;
+ if (i >= 2) f.deliver_selectstring_sender_regex = TRUE;
+ if (i == 1 || i == 4) f.deliver_force_thaw = TRUE;
+ argrest += Ustrlen(rsopts[i]);
+ }
/* -S: Set string to match in addresses for forced queue run to
pick out particular messages. */
- if (*argrest)
- deliver_selectstring_sender = string_copy_taint(argrest, TRUE);
- else if (i+1 < argc)
- deliver_selectstring_sender = string_copy_taint(argv[++i], TRUE);
- else
- exim_fail("exim: string expected after -S\n");
+ if (*argrest)
+ tainted_selectstr = argrest;
+ else if (i+1 < argc)
+ tainted_selectstr = argv[++i];
+ else
+ exim_fail("exim: string expected after -S\n");
+ deliver_selectstring_sender = string_copy_taint(
+ exim_str_fail_toolong(tainted_selectstr, EXIM_EMAILADDR_MAX, "-S"),
+ GET_TAINTED);
+ }
break;
/* -Tqt is an option that is exclusively for use by the testing suite.
case 'T':
if (f.running_in_test_harness && Ustrcmp(argrest, "qt") == 0)
- fudged_queue_times = string_copy_taint(argv[++i], TRUE);
+ fudged_queue_times = string_copy_taint(argv[++i], GET_TAINTED);
else badarg = TRUE;
break;
exim_fail("exim: string expected after -X\n");
break;
+ /* -z: a line of text to log */
+
case 'z':
if (!*argrest)
if (++i < argc)
- log_oneline = string_copy_taint(argv[i], TRUE);
+ log_oneline = string_copy_taint(
+ exim_str_fail_toolong(argv[i], 2048, "-z logtext"),
+ GET_TAINTED);
else
exim_fail("exim: file name expected after %s\n", argv[i-1]);
break;
version_string, (long int)real_uid, (long int)real_gid, (int)getpid(),
debug_selector);
if (!version_printed)
- show_whats_supported(stderr);
+ show_whats_supported(FALSE);
}
}
{
struct rlimit rlp;
- #ifdef RLIMIT_NOFILE
+#ifdef RLIMIT_NOFILE
if (getrlimit(RLIMIT_NOFILE, &rlp) < 0)
{
log_write(0, LOG_MAIN|LOG_PANIC, "getrlimit(RLIMIT_NOFILE) failed: %s",
strerror(errno));
}
}
- #endif
+#endif
- #ifdef RLIMIT_NPROC
+#ifdef RLIMIT_NPROC
if (getrlimit(RLIMIT_NPROC, &rlp) < 0)
{
log_write(0, LOG_MAIN|LOG_PANIC, "getrlimit(RLIMIT_NPROC) failed: %s",
rlp.rlim_cur = rlp.rlim_max = 0;
}
- #ifdef RLIM_INFINITY
+# ifdef RLIM_INFINITY
if (rlp.rlim_cur != RLIM_INFINITY && rlp.rlim_cur < 1000)
{
rlp.rlim_cur = rlp.rlim_max = RLIM_INFINITY;
- #else
+# else
if (rlp.rlim_cur < 1000)
{
rlp.rlim_cur = rlp.rlim_max = 1000;
- #endif
+# endif
if (setrlimit(RLIMIT_NPROC, &rlp) < 0)
log_write(0, LOG_MAIN|LOG_PANIC, "setrlimit(RLIMIT_NPROC) failed: %s",
strerror(errno));
}
- #endif
+#endif
}
/* Exim is normally entered as root (but some special configurations are
This needs to happen before we read the main configuration. */
init_lookup_list();
+/*XXX this excrescence could move to the testsuite standard config setup file */
#ifdef SUPPORT_I18N
if (f.running_in_test_harness) smtputf8_advertise_hosts = NULL;
#endif
/* Store the initial cwd before we change directories. Can be NULL if the
dir has already been unlinked. */
initial_cwd = os_getcwd(NULL, 0);
+if (!initial_cwd && errno)
+ exim_fail("exim: getting initial cwd failed: %s\n", strerror(errno));
+
+if (initial_cwd && (strlen(CCS initial_cwd) >= BIG_BUFFER_SIZE))
+ exim_fail("exim: initial cwd is far too long (%d)\n", Ustrlen(CCS initial_cwd));
/* checking:
-be[m] expansion test -
defined) */
{
+ int old_pool = store_pool;
#ifdef MEASURE_TIMING
- struct timeval t0, diff;
+ struct timeval t0;
(void)gettimeofday(&t0, NULL);
#endif
+ store_pool = POOL_CONFIG;
readconf_main(checking || list_options);
+ store_pool = old_pool;
#ifdef MEASURE_TIMING
report_time_since(&t0, US"readconf_main (delta)");
#endif
}
-
/* Now in directory "/" */
if (cleanup_environment() == FALSE)
p += 13;
else
{
- Ustrncpy(p + 4, initial_cwd, big_buffer_size-5);
- p += 4 + Ustrlen(initial_cwd);
- /* in case p is near the end and we don't provide enough space for
- * string_format to be willing to write. */
- *p = '\0';
+ p += 4;
+ snprintf(CS p, big_buffer_size - (p - big_buffer), "%s", CCS initial_cwd);
+ p += Ustrlen(CCS p);
}
(void)string_format(p, big_buffer_size - (p - big_buffer), " %d args:", argc);
if (Uchdir(spool_directory) != 0)
{
- int dummy;
- (void)directory_make(spool_directory, US"", SPOOL_DIRECTORY_MODE, FALSE);
- dummy = /* quieten compiler */ Uchdir(spool_directory);
- dummy = dummy; /* yet more compiler quietening, sigh */
+ (void) directory_make(spool_directory, US"", SPOOL_DIRECTORY_MODE, FALSE);
+ (void) Uchdir(spool_directory);
}
/* Handle calls with the -bi option. This is a sendmail option to rebuild *the*
if (bi_option)
{
- (void)fclose(config_file);
- if (bi_command)
+ (void) fclose(config_file);
+ if (bi_command && *bi_command)
{
int i = 0;
uschar *argv[3];
- argv[i++] = bi_command;
+ argv[i++] = bi_command; /* nonexpanded option so assume untainted */
if (alias_arg) argv[i++] = alias_arg;
argv[i++] = NULL;
setgroups(group_count, group_list);
exim_setugid(real_uid, real_gid, FALSE, US"running bi_command");
- DEBUG(D_exec) debug_printf("exec %.256s %.256s\n", argv[0],
- argv[1] ? argv[1] : US"");
+ DEBUG(D_exec) debug_printf("exec '%.256s' %s%.256s%s\n", argv[0],
+ argv[1] ? "'" : "", argv[1] ? argv[1] : US"", argv[1] ? "'" : "");
execv(CS argv[0], (char *const *)argv);
- exim_fail("exim: exec failed: %s\n", strerror(errno));
+ exim_fail("exim: exec '%s' failed: %s\n", argv[0], strerror(errno));
}
else
{
|| msg_action != MSG_DELIVER /* not delivering */
) /* and */
&& (!checking || !f.address_test_mode) /* not address checking */
+ && !rcpt_verify_quota /* and not quota checking */
) ) )
exim_setugid(exim_uid, exim_gid, TRUE, US"privilege not needed");
if (!(unprivileged || removed_privilege))
exim_fail("exim: changing group failed: %s\n", strerror(errno));
else
+ {
DEBUG(D_any) debug_printf("changing group to %ld failed: %s\n",
(long int)exim_gid, strerror(errno));
+ }
}
/* Handle a request to scan a file for malware */
event_action gets expanded */
if (msg_action == MSG_REMOVE)
+ {
+ int old_pool = store_pool;
+ store_pool = POOL_CONFIG;
readconf_rest();
+ store_pool = old_pool;
+ store_writeprotect(POOL_CONFIG);
+ }
if (!one_msg_action)
{
needed in transports so we lost the optimisation. */
{
+ int old_pool = store_pool;
#ifdef MEASURE_TIMING
- struct timeval t0, diff;
+ struct timeval t0;
(void)gettimeofday(&t0, NULL);
#endif
+ store_pool = POOL_CONFIG;
readconf_rest();
+ store_pool = old_pool;
+
+ /* -be can add macro definitions, needing to link to the macro structure
+ chain. Otherwise, make the memory used for config data readonly. */
+
+ if (!expansion_test)
+ store_writeprotect(POOL_CONFIG);
#ifdef MEASURE_TIMING
report_time_since(&t0, US"readconf_rest (delta)");
#endif
}
+/* Handle a request to check quota */
+if (rcpt_verify_quota)
+ if (real_uid != root_uid && real_uid != exim_uid)
+ exim_fail("exim: Permission denied\n");
+ else if (recipients_arg >= argc)
+ exim_fail("exim: missing recipient for quota check\n");
+ else
+ {
+ verify_quota(argv[recipients_arg]);
+ exim_exit(EXIT_SUCCESS);
+ }
+
/* Handle the -brt option. This is for checking out retry configurations.
The next three arguments are a domain name or a complete address, and
optionally two error numbers. All it does is to call the function that
retry_config *yield;
int basic_errno = 0;
int more_errno = 0;
- uschar *s1, *s2;
+ const uschar *s1, *s2;
if (test_retry_arg >= argc)
{
printf("-brt needs a domain or address argument\n");
exim_exit(EXIT_FAILURE);
}
- s1 = argv[test_retry_arg++];
+ s1 = exim_str_fail_toolong(argv[test_retry_arg++], EXIM_EMAILADDR_MAX, "-brt");
s2 = NULL;
/* If the first argument contains no @ and no . it might be a local user
/* There may be an optional second domain arg. */
if (test_retry_arg < argc && Ustrchr(argv[test_retry_arg], '.') != NULL)
- s2 = argv[test_retry_arg++];
+ s2 = exim_str_fail_toolong(argv[test_retry_arg++], EXIM_DOMAINNAME_MAX, "-brt 2nd");
/* The final arg is an error name */
if (test_retry_arg < argc)
{
- uschar *ss = argv[test_retry_arg];
+ const uschar *ss = exim_str_fail_toolong(argv[test_retry_arg], EXIM_DRIVERNAME_MAX, "-brt 3rd");
uschar *error =
readconf_retry_error(ss, ss + Ustrlen(ss), &basic_errno, &more_errno);
if (error != NULL)
Ustrcmp(argv[i], "macro") == 0 ||
Ustrcmp(argv[i], "environment") == 0))
{
- fail |= !readconf_print(argv[i+1], argv[i], flag_n);
+ fail |= !readconf_print(exim_str_fail_toolong(argv[i+1], EXIM_DRIVERNAME_MAX, "-bP name"), argv[i], flag_n);
i++;
}
else
- fail = !readconf_print(argv[i], NULL, flag_n);
+ fail = !readconf_print(exim_str_fail_toolong(argv[i], EXIM_DRIVERNAME_MAX, "-bP item"), NULL, flag_n);
}
exim_exit(fail ? EXIT_FAILURE : EXIT_SUCCESS);
}
pid_t pid;
/*XXX This use of argv[i] for msg_id should really be tainted, but doing
that runs into a later copy into the untainted global message_id[] */
+ /*XXX Do we need a length limit check here? */
if (i == argc - 1)
(void)deliver_message(argv[i], forced_delivery, deliver_give_up);
else if ((pid = exim_fork(US"cmdline-delivery")) == 0)
if (gecos_pattern && gecos_name)
{
- const pcre *re;
- re = regex_must_compile(gecos_pattern, FALSE, TRUE); /* Use malloc */
+ const pcre2_code *re;
+ re = regex_must_compile(gecos_pattern, MCS_NOFLAGS, TRUE); /* Use malloc */
if (regex_match_and_setup(re, name, 0, -1))
{
configuration specifies something to use. When running in the test harness,
any setting of unknown_login overrides the actual name. */
-if (originator_login == NULL || f.running_in_test_harness)
+if (!originator_login || f.running_in_test_harness)
{
- if (unknown_login != NULL)
+ if (unknown_login)
{
originator_login = expand_string(unknown_login);
- if (originator_name == NULL && unknown_username != NULL)
+ if (!originator_name && unknown_username)
originator_name = expand_string(unknown_username);
- if (originator_name == NULL) originator_name = US"";
+ if (!originator_name) originator_name = US"";
}
- if (originator_login == NULL)
+ if (!originator_login)
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "Failed to get user name for uid %d",
(int)real_uid);
}
/* Ensure that the user name is in a suitable form for use as a "phrase" in an
RFC822 address.*/
-originator_name = string_copy(parse_fix_phrase(originator_name,
- Ustrlen(originator_name), big_buffer, big_buffer_size));
+originator_name = US parse_fix_phrase(originator_name, Ustrlen(originator_name));
/* If a message is created by this call of Exim, the uid/gid of its originator
are those of the caller. These values are overridden if an existing message is
routines in it, so call even if tls_require_ciphers is unset */
{
# ifdef MEASURE_TIMING
- struct timeval t0, diff;
+ struct timeval t0;
(void)gettimeofday(&t0, NULL);
# endif
if (!tls_dropprivs_validate_require_cipher(FALSE))
printf("-brw needs an address argument\n");
exim_exit(EXIT_FAILURE);
}
- rewrite_test(argv[test_rewrite_arg]);
+ rewrite_test(exim_str_fail_toolong(argv[test_rewrite_arg], EXIM_EMAILADDR_MAX, "-brw"));
exim_exit(EXIT_SUCCESS);
}
while (recipients_arg < argc)
{
/* Supplied addresses are tainted since they come from a user */
- uschar * s = string_copy_taint(argv[recipients_arg++], TRUE);
+ uschar * s = string_copy_taint(
+ exim_str_fail_toolong(argv[recipients_arg++], EXIM_DISPLAYMAIL_MAX, "address verification"),
+ GET_TAINTED);
while (*s)
{
BOOL finished = FALSE;
{
uschar * s = get_stdinput(NULL, NULL);
if (!s) break;
- test_address(string_copy_taint(s, TRUE), flags, &exit_value);
+ test_address(string_copy_taint(
+ exim_str_fail_toolong(s, EXIM_DISPLAYMAIL_MAX, "address verification (stdin)"),
+ GET_TAINTED),
+ flags, &exit_value);
}
route_tidyup();
dns_init(FALSE, FALSE, FALSE);
if (msg_action_arg > 0 && msg_action == MSG_LOAD)
{
- uschar spoolname[256]; /* Not big_buffer; used in spool_read_header() */
+ uschar * spoolname;
if (!f.admin_user)
exim_fail("exim: permission denied\n");
- message_id = argv[msg_action_arg];
- (void)string_format(spoolname, sizeof(spoolname), "%s-H", message_id);
+ message_id = US exim_str_fail_toolong(argv[msg_action_arg], MESSAGE_ID_LENGTH, "message-id");
+ /* Checking the length of the ID is sufficient to validate it.
+ Get an untainted version so file opens can be done. */
+ message_id = string_copy_taint(message_id, GET_UNTAINTED);
+
+ spoolname = string_sprintf("%s-H", message_id);
if ((deliver_datafile = spool_open_datafile(message_id)) < 0)
printf ("Failed to load message datafile %s\n", message_id);
if (spool_read_header(spoolname, TRUE, FALSE) != spool_read_OK)
if (recipients_arg < argc)
while (recipients_arg < argc)
- expansion_test_line(argv[recipients_arg++]);
+ expansion_test_line(exim_str_fail_toolong(argv[recipients_arg++], EXIM_EMAILADDR_MAX, "recipient"));
/* Read stdin */
it. The code works for both IPv4 and IPv6, as it happens. */
size = host_aton(sender_host_address, x);
- sender_host_address = store_get(48, FALSE); /* large enough for full IPv6 */
+ sender_host_address = store_get(48, GET_UNTAINTED); /* large enough for full IPv6 */
(void)host_nmtoa(size, x, -1, sender_host_address, ':');
/* Now set up for testing */
memset(sender_host_cache, 0, sizeof(sender_host_cache));
if (verify_check_host(&hosts_connection_nolog) == OK)
+ {
BIT_CLEAR(log_selector, log_selector_size, Li_smtp_connection);
+ BIT_CLEAR(log_selector, log_selector_size, Li_smtp_no_mail);
+ }
log_write(L_smtp_connection, LOG_MAIN, "%s", smtp_get_connection_info());
/* NOTE: We do *not* call smtp_log_no_mail() if smtp_start_session() fails,
{
if (!f.is_inetd) set_process_info("accepting a local %sSMTP message from <%s>",
smtp_batched_input? "batched " : "",
- (sender_address!= NULL)? sender_address : originator_login);
+ sender_address ? sender_address : originator_login);
}
else
{
smtp_out = stdout;
memset(sender_host_cache, 0, sizeof(sender_host_cache));
if (verify_check_host(&hosts_connection_nolog) == OK)
+ {
BIT_CLEAR(log_selector, log_selector_size, Li_smtp_connection);
+ BIT_CLEAR(log_selector, log_selector_size, Li_smtp_no_mail);
+ }
log_write(L_smtp_connection, LOG_MAIN, "%s", smtp_get_connection_info());
if (!smtp_start_session())
{
}
}
-/* Otherwise, set up the input size limit here. */
+/* Otherwise, set up the input size limit here and set no stdin stdio buffer
+(we handle buferring so as to have visibility of fill level). */
else
{
else
log_write(0, LOG_MAIN|LOG_PANIC_DIE, "invalid value for "
"message_size_limit: %s", expand_string_message);
+
+ setvbuf(stdin, NULL, _IONBF, 0);
}
/* Loop for several messages when reading SMTP input. If we fork any child
if (!f.synchronous_delivery)
{
- #ifdef SA_NOCLDWAIT
+#ifdef SA_NOCLDWAIT
struct sigaction act;
act.sa_handler = SIG_IGN;
sigemptyset(&(act.sa_mask));
act.sa_flags = SA_NOCLDWAIT;
sigaction(SIGCHLD, &act, NULL);
- #else
+#else
signal(SIGCHLD, SIG_IGN);
- #endif
+#endif
}
/* Save the current store pool point, for resetting at the start of
messages to be read (SMTP input), or FALSE otherwise (not SMTP, or SMTP channel
collapsed). */
-while (more)
+for (BOOL more = TRUE; more; )
{
rmark reset_point = store_mark();
message_id[0] = 0;
/* Now get the data for the message */
more = receive_msg(extract_recipients);
- if (message_id[0] == 0)
+ if (!message_id[0])
{
cancel_cutthrough_connection(TRUE, US"receive dropped");
- if (more) goto moreloop;
+ if (more) goto MORELOOP;
smtp_log_no_mail(); /* Log no mail if configured */
exim_exit(EXIT_FAILURE);
}
{
int start, end, domain;
uschar * errmess;
- uschar * s = string_copy_taint(list[i], TRUE);
+ /* There can be multiple addresses, so EXIM_DISPLAYMAIL_MAX (tuned for 1) is too short.
+ * We'll still want to cap it to something, just in case. */
+ uschar * s = string_copy_taint(
+ exim_str_fail_toolong(list[i], BIG_BUFFER_SIZE, "address argument"),
+ GET_TAINTED);
/* Loop for each comma-separated address */
- while (*s != 0)
+ while (*s)
{
BOOL finished = FALSE;
uschar *recipient;
parse_extract_address(s, &errmess, &start, &end, &domain, FALSE);
#ifdef SUPPORT_I18N
- if (string_is_utf8(recipient))
- message_smtputf8 = TRUE;
- else
- allow_utf8_domains = b;
+ if (recipient)
+ if (string_is_utf8(recipient)) message_smtputf8 = TRUE;
+ else allow_utf8_domains = b;
}
+#else
+ ;
#endif
if (domain == 0 && !f.allow_unqualified_recipient)
{
errors_sender_rc : EXIT_FAILURE;
}
- receive_add_recipient(string_copy_taint(recipient, TRUE), -1);
+ receive_add_recipient(string_copy_taint(recipient, GET_TAINTED), -1);
s = ss;
if (!finished)
while (*(++s) != 0 && (*s == ',' || isspace(*s)));
the file copy. */
if (!receive_timeout)
- {
- struct timeval t = { .tv_sec = 30*60, .tv_usec = 0 }; /* 30 minutes */
- fd_set r;
-
- FD_ZERO(&r); FD_SET(0, &r);
- if (select(1, &r, NULL, NULL, &t) == 0) mainlog_close();
- }
+ if (poll_one_fd(0, POLLIN, 30*60*1000) == 0) /* 30 minutes */
+ mainlog_close();
/* Read the data for the message. If filter_test is not FTEST_NONE, this
will just read the headers for the message, and not write anything onto the
for real; when reading the headers of a message for filter testing,
it is TRUE if the headers were terminated by '.' and FALSE otherwise. */
- if (message_id[0] == 0) exim_exit(EXIT_FAILURE);
+ if (!message_id[0]) exim_exit(EXIT_FAILURE);
} /* Non-SMTP message reception */
/* If this is a filter testing run, there are headers in store, but
{
deliver_domain = ftest_domain ? ftest_domain : qualify_domain_recipient;
deliver_domain_orig = deliver_domain;
- deliver_localpart = ftest_localpart ? ftest_localpart : originator_login;
+ deliver_localpart = ftest_localpart ? US ftest_localpart : originator_login;
deliver_localpart_orig = deliver_localpart;
- deliver_localpart_prefix = ftest_prefix;
- deliver_localpart_suffix = ftest_suffix;
+ deliver_localpart_prefix = US ftest_prefix;
+ deliver_localpart_suffix = US ftest_suffix;
deliver_home = originator_home;
if (!return_path)
finished subprocesses here, in case there are lots of messages coming in
from the same source. */
- #ifndef SIG_IGN_WORKS
+#ifndef SIG_IGN_WORKS
while (waitpid(-1, NULL, WNOHANG) > 0);
- #endif
+#endif
-moreloop:
+MORELOOP:
return_path = sender_address = NULL;
authenticated_sender = NULL;
deliver_localpart_orig = NULL;
dnslist_domain = dnslist_matched = NULL;
#ifdef WITH_CONTENT_SCAN
malware_name = NULL;
+ regex_vars_clear();
#endif
callout_address = NULL;
sending_ip_address = NULL;
deliver_localpart_data = deliver_domain_data =
recipient_data = sender_data = NULL;
acl_var_m = NULL;
- for(int i = 0; i < REGEX_VARS; i++) regex_vars[i] = NULL;
store_reset(reset_point);
}
git://git.exim.org / exim.git / blobdiff