ETRN_CMD, /* This by analogy with TURN from the RFC */
STARTTLS_CMD, /* Required by the STARTTLS RFC */
TLS_AUTH_CMD, /* auto-command at start of SSL */
+ BDAT_CMD, /* Implied by RFC3030 "After all MAIL and..." */
/* This is a dummy to identify the non-sync commands when pipelining */
{ "mail from:", sizeof("mail from:")-1, MAIL_CMD, TRUE, TRUE },
{ "rcpt to:", sizeof("rcpt to:")-1, RCPT_CMD, TRUE, TRUE },
{ "data", sizeof("data")-1, DATA_CMD, FALSE, TRUE },
+ { "bdat", sizeof("bdat")-1, BDAT_CMD, TRUE, TRUE },
{ "quit", sizeof("quit")-1, QUIT_CMD, FALSE, TRUE },
{ "noop", sizeof("noop")-1, NOOP_CMD, TRUE, FALSE },
{ "etrn", sizeof("etrn")-1, ETRN_CMD, TRUE, FALSE },
static uschar *smtp_names[] =
{
- US"NONE", US"AUTH", US"DATA", US"EHLO", US"ETRN", US"EXPN", US"HELO",
- US"HELP", US"MAIL", US"NOOP", US"QUIT", US"RCPT", US"RSET", US"STARTTLS",
- US"VRFY" };
+ US"NONE", US"AUTH", US"DATA", US"BDAT", US"EHLO", US"ETRN", US"EXPN",
+ US"HELO", US"HELP", US"MAIL", US"NOOP", US"QUIT", US"RCPT", US"RSET",
+ US"STARTTLS", US"VRFY" };
static uschar *protocols_local[] = {
US"local-smtp", /* HELO */
memset(sender_address_cache, 0, sizeof(sender_address_cache));
memset(sender_domain_cache, 0, sizeof(sender_domain_cache));
-#ifndef DISABLE_PRDR
-prdr_requested = FALSE;
-#endif
-
-/* Reset the DSN flags */
-dsn_ret = 0;
-dsn_envid = NULL;
-
authenticated_sender = NULL;
#ifdef EXPERIMENTAL_BRIGHTMAIL
bmi_run = 0;
bmi_verdicts = NULL;
#endif
+chunking_state = CHUNKING_NOT_OFFERED;
#ifndef DISABLE_DKIM
dkim_signers = NULL;
dkim_disable_verify = FALSE;
dkim_collect_input = FALSE;
#endif
+dsn_ret = 0;
+dsn_envid = NULL;
+#ifndef DISABLE_PRDR
+prdr_requested = FALSE;
+#endif
#ifdef EXPERIMENTAL_SPF
spf_header_comment = NULL;
spf_received = NULL;
if (!first) s = string_catn(s, &size, &ptr, US"\r\n", 2);
}
+ /* RFC 3030 CHUNKING */
+
+ if (verify_check_host(&chunking_advertise_hosts) != FAIL)
+ {
+ s = string_catn(s, &size, &ptr, smtp_code, 3);
+ s = string_catn(s, &size, &ptr, US"-CHUNKING\r\n", 11);
+ chunking_state = CHUNKING_OFFERED;
+ }
+
/* Advertise TLS (Transport Level Security) aka SSL (Secure Socket Layer)
if it has been included in the binary, and the host matches
tls_advertise_hosts. We must *not* advertise if we are already in a
(often indicating some kind of system error), it is helpful to include it
with the DATA rejection (an idea suggested by Tony Finch). */
+ case BDAT_CMD:
+ HAD(SCH_BDAT);
+ {
+ int n;
+
+ if (chunking_state != CHUNKING_OFFERED)
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"BDAT command used when CHUNKING not advertised");
+ break;
+ }
+
+ /* grab size, endmarker */
+
+ if (sscanf(CS smtp_cmd_data, "%u %n", &chunking_datasize, &n) < 1)
+ {
+ done = synprot_error(L_smtp_protocol_error, 503, NULL,
+ US"missing size for BDAT command");
+ break;
+ }
+ chunking_state = strcmpic(smtp_cmd_data+n, US"LAST") == 0
+ ? CHUNKING_LAST : CHUNKING_ACTIVE;
+
+ DEBUG(D_any)
+ debug_printf("chunking state %d\n", (int)chunking_state);
+ goto DATA_BDAT;
+ }
+
case DATA_CMD:
HAD(SCH_DATA);
+
+ DATA_BDAT: /* Common code for DATA and BDAT */
if (!discarded && recipients_count <= 0)
{
if (rcpt_smtp_response_same && rcpt_smtp_response != NULL)
smtp_respond(code, 3, FALSE, rcpt_smtp_response);
}
if (pipelining_advertised && last_was_rcpt)
- smtp_printf("503 Valid RCPT command must precede DATA\r\n");
+ smtp_printf("503 Valid RCPT command must precede %s\r\n",
+ smtp_names[smtp_connection_had[smtp_ch_index-1]]);
else
done = synprot_error(L_smtp_protocol_error, 503, NULL,
- US"valid RCPT command must precede DATA");
+ smtp_connection_had[smtp_ch_index-1] == SCH_DATA
+ ? US"valid RCPT command must precede DATA"
+ : US"valid RCPT command must precede BDAT");
break;
}
break;
}
+ /* No go-ahead output for BDAT */
+
+ if (smtp_connection_had[smtp_ch_index-1] == SCH_BDAT)
+ {
+ rc = OK;
+ break;
+ }
+
/* If there is an ACL, re-check the synchronization afterwards, since the
ACL may have delayed. To handle cutthrough delivery enforce a dummy call
to get the DATA command sent. */
- if (acl_smtp_predata == NULL && cutthrough.fd < 0) rc = OK; else
+ if (acl_smtp_predata == NULL && cutthrough.fd < 0)
+ rc = OK;
+ else
{
uschar * acl= acl_smtp_predata ? acl_smtp_predata : US"accept";
enable_dollar_recipients = TRUE;
if (receive_smtp_buffered())
{
DEBUG(D_any)
- debug_printf("Non-empty input buffer after STARTTLS; naive attack?");
+ debug_printf("Non-empty input buffer after STARTTLS; naive attack?\n");
if (tls_in.active < 0)
smtp_inend = smtp_inptr = smtp_inbuffer;
/* and if TLS is already active, tls_server_start() should fail */
break;
}
etrn_command = US"exim -R";
- argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE, 2, US"-R",
- smtp_cmd_data);
+ argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE,
+ *queue_name ? 4 : 2,
+ US"-R", smtp_cmd_data,
+ US"-MCG", queue_name);
}
/* If we are host-testing, don't actually do anything. */
git://git.exim.org / exim.git / blobdiff