DMARC: check for empty filename for TLD file. Patch testsuite to not break on missin...

[exim.git] / src / src / configure.default

diff --git a/src/src/configure.default b/src/src/configure.default
index 9247b10fe593b9a61754fd64ee7e3792a817d6c7..555dec3eca43cf615927b7158d2c8c970dd4a3aa 100644 (file)
--- a/src/src/configure.default
+++ b/src/src/configure.default
@@ -9,7 +9,7 @@
 # configuration file. There are many more than are mentioned here. The
 # manual is in the file doc/spec.txt in the Exim distribution as a plain
 # ASCII file. Other formats (PostScript, Texinfo, HTML, PDF) are available
 # configuration file. There are many more than are mentioned here. The
 # manual is in the file doc/spec.txt in the Exim distribution as a plain
 # ASCII file. Other formats (PostScript, Texinfo, HTML, PDF) are available

-# from the Exim ftp sites. The manual is also online at the Exim web sites.
+# from the Exim ftp sites. The manual is also online at the Exim website.

 
 
 # This file is divided into several parts, all but the first of which are
 
 
 # This file is divided into several parts, all but the first of which are


@@ -37,6 +37,18 @@
 
 
 
 
 
 

+######################################################################
+#                               MACROS                               #
+######################################################################
+#
+
+# If you want to use a smarthost instead of sending directly to recipient
+# domains, uncomment this macro definition and set a real hostname.
+# An appropriately privileged user can then redirect email on the command-line
+# in emergencies, via -D.
+#
+# ROUTER_SMARTHOST=MAIL.HOSTNAME.FOR.CENTRAL.SERVER.EXAMPLE
+

 ######################################################################
 #                    MAIN CONFIGURATION SETTINGS                     #
 ######################################################################
 ######################################################################
 #                    MAIN CONFIGURATION SETTINGS                     #
 ######################################################################


@@ -107,8 +119,11 @@ hostlist   relay_from_hosts = localhost
 # manual for details. The lists above are used in the access control lists for
 # checking incoming messages. The names of these ACLs are defined here:
 
 # manual for details. The lists above are used in the access control lists for
 # checking incoming messages. The names of these ACLs are defined here:
 

-acl_smtp_rcpt = acl_check_rcpt
-acl_smtp_data = acl_check_data
+acl_smtp_rcpt =         acl_check_rcpt
+.ifdef _HAVE_PRDR
+acl_smtp_data_prdr =    acl_check_prdr
+.endif
+acl_smtp_data =         acl_check_data

 
 # You should not change those settings until you understand how ACLs work.
 
 
 # You should not change those settings until you understand how ACLs work.
 


@@ -225,6 +240,13 @@ never_users = root
 host_lookup = *
 
 
 host_lookup = *
 
 

+# The setting below causes Exim to try to initialize the system resolver
+# library with DNSSEC support.  It has no effect if your library lacks
+# DNSSEC support.
+
+dns_dnssec_ok = 1
+
+

 # The settings below cause Exim to make RFC 1413 (ident) callbacks
 # for all incoming SMTP calls. You can limit the hosts to which these
 # calls are made, and/or change the timeout that is used. If you set
 # The settings below cause Exim to make RFC 1413 (ident) callbacks
 # for all incoming SMTP calls. You can limit the hosts to which these
 # calls are made, and/or change the timeout that is used. If you set


@@ -244,7 +266,9 @@ host_lookup = *
 # may request to use it.  For multi-recipient mails we then can
 # reject or accept per-user after the message is received.
 #
 # may request to use it.  For multi-recipient mails we then can
 # reject or accept per-user after the message is received.
 #

+.ifdef _HAVE_PRDR

 prdr_enable = true
 prdr_enable = true

+.endif

 
 
 # By default, Exim expects all envelope addresses to be fully qualified, that
 
 
 # By default, Exim expects all envelope addresses to be fully qualified, that


@@ -264,7 +288,7 @@ prdr_enable = true
 # detail than the default.  Adjust to suit.
 
 log_selector = +smtp_protocol_error +smtp_syntax_error \
 # detail than the default.  Adjust to suit.
 
 log_selector = +smtp_protocol_error +smtp_syntax_error \

-       +tls_certificate_verified
+        +tls_certificate_verified

 
 
 # If you want Exim to support the "percent hack" for certain domains,
 
 
 # If you want Exim to support the "percent hack" for certain domains,


@@ -454,8 +478,8 @@ acl_check_rcpt:
 
   # Insist that a HELO/EHLO was accepted.
 
 
   # Insist that a HELO/EHLO was accepted.
 

-  require message      = nice hosts say HELO first
-          condition    = ${if def:sender_helo_name}
+  require message       = nice hosts say HELO first
+          condition     = ${if def:sender_helo_name}

 
   # Insist that any other recipient address that we accept is either in one of
   # our local domains, or is in a domain for which we explicitly allow
 
   # Insist that any other recipient address that we accept is either in one of
   # our local domains, or is in a domain for which we explicitly allow


@@ -497,12 +521,45 @@ acl_check_rcpt:
   # require verify = csa
   #############################################################################
 
   # require verify = csa
   #############################################################################
 

+  #############################################################################
+  # If doing per-user content filtering then recipients with filters different
+  # to the first recipient must be deferred unless the sender talks PRDR.
+  #
+  # defer  !condition     = $prdr_requested
+  #        condition      = ${if > {0}{$receipients_count}}
+  #        condition      = ${if !eq {$acl_m_content_filter} \
+  #                                  {${lookup PER_RCPT_CONTENT_FILTER}}}
+  # warn   !condition     = $prdr_requested
+  #        condition      = ${if > {0}{$receipients_count}}
+  #        set acl_m_content_filter = ${lookup PER_RCPT_CONTENT_FILTER}
+  #############################################################################
+

   # At this point, the address has passed all the checks that have been
   # configured, so we accept it unconditionally.
 
   accept
 
 
   # At this point, the address has passed all the checks that have been
   # configured, so we accept it unconditionally.
 
   accept
 
 

+# This ACL is used once per recipient, for multi-recipient messages, if
+# we advertised PRDR.  It can be used to perform receipient-dependent
+# header- and body- based filtering and rejections.
+# We set a variable to record that PRDR was active used, so that checking
+# in the data ACL can be skipped.
+
+.ifdef _HAVE_PRDR
+acl_check_prdr:
+  warn  set acl_m_did_prdr = y
+.endif
+
+  #############################################################################
+  # do lookup on filtering, with $local_part@$domain, deny on filter match
+  #
+  # deny      set acl_m_content_filter = ${lookup PER_RCPT_CONTENT_FILTER}
+  #           condition    = ...
+  #############################################################################
+
+  accept
+

 # This ACL is used after the contents of a message have been received. This
 # is the ACL in which you can test a message's headers or body, and in
 # particular, this is where you can invoke external virus or spam scanners.
 # This ACL is used after the contents of a message have been received. This
 # is the ACL in which you can test a message's headers or body, and in
 # particular, this is where you can invoke external virus or spam scanners.


@@ -522,9 +579,9 @@ acl_check_data:
 
   # Deny if the headers contain badly-formed addresses.
   #
 
   # Deny if the headers contain badly-formed addresses.
   #

-  deny   !verify =     header_syntax
-         message =     header syntax
-         log_message = header syntax ($acl_verify_message)
+  deny    !verify =     header_syntax
+          message =     header syntax
+          log_message = header syntax ($acl_verify_message)

 
   # Deny if the message contains a virus. Before enabling this check, you
   # must install a virus scanner and set the av_scanner option above.
 
   # Deny if the message contains a virus. Before enabling this check, you
   # must install a virus scanner and set the av_scanner option above.


@@ -542,6 +599,19 @@ acl_check_data:
   #                      X-Spam_bar: $spam_bar\n\
   #                      X-Spam_report: $spam_report
 
   #                      X-Spam_bar: $spam_bar\n\
   #                      X-Spam_report: $spam_report
 

+  #############################################################################
+  # No more tests if PRDR was actively used.
+  # accept   condition  = ${if def:acl_m_did_prdr}
+  #
+  # To get here, all message recipients must have identical per-user
+  # content filtering (enforced by RCPT ACL).  Do lookup for filter
+  # and deny on match.
+  #
+  # deny      set acl_m_content_filter = ${lookup PER_RCPT_CONTENT_FILTER}
+  #           condition    = ...
+  #############################################################################
+
+

   # Accept the message.
 
   accept
   # Accept the message.
 
   accept


@@ -573,6 +643,25 @@ begin routers
 #   transport = remote_smtp
 
 
 #   transport = remote_smtp
 
 

+# This router can be used when you want to send all mail to a
+# server which handles DNS lookups for you; an ISP will typically run such
+# a server for their customers.  The hostname in route_data comes from the
+# macro defined at the top of the file.  If not defined, then we'll use the
+# dnslookup router below instead.
+# Beware that the hostname is specified again in the Transport.
+
+.ifdef ROUTER_SMARTHOST
+
+smarthost:
+  driver = manualroute
+  domains = ! +local_domains
+  transport = smarthost_smtp
+  route_data = ROUTER_SMARTHOST
+  ignore_target_hosts = <; 0.0.0.0 ; 127.0.0.0/8 ; ::1
+  no_more
+
+.else
+

 # This router routes addresses that are not in local domains by doing a DNS
 # lookup on the domain name. The exclamation mark that appears in "domains = !
 # +local_domains" is a negating operator, that is, it can be read as "not". The
 # This router routes addresses that are not in local domains by doing a DNS
 # lookup on the domain name. The exclamation mark that appears in "domains = !
 # +local_domains" is a negating operator, that is, it can be read as "not". The


@@ -593,22 +682,12 @@ dnslookup:
   ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
 # if ipv6-enabled then instead use:
 # ignore_target_hosts = <; 0.0.0.0 ; 127.0.0.0/8 ; ::1
   ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
 # if ipv6-enabled then instead use:
 # ignore_target_hosts = <; 0.0.0.0 ; 127.0.0.0/8 ; ::1

+  dnssec_request_domains = *

   no_more
 
   no_more
 

-
-# This alternative router can be used when you want to send all mail to a
-# server which handles DNS lookups for you; an ISP will typically run such
-# a server for their customers.  If you uncomment "smarthost" then you
-# should comment out "dnslookup" above.  Setting a real hostname in route_data
-# wouldn't hurt either.
-
-# smarthost:
-#   driver = manualroute
-#   domains = ! +local_domains
-#   transport = smarthost_smtp
-#   route_data = MAIL.HOSTNAME.FOR.CENTRAL.SERVER.EXAMPLE
-#   ignore_target_hosts = <; 0.0.0.0 ; 127.0.0.0/8 ; ::1
-#   no_more
+# This closes the ROUTER_SMARTHOST ifdef around the choice of routing for
+# off-site mail.
+.endif

 
 
 # The remaining routers handle addresses in the local domain(s), that is those
 
 
 # The remaining routers handle addresses in the local domain(s), that is those


@@ -725,6 +804,13 @@ begin transports
 remote_smtp:
   driver = smtp
   message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}}
 remote_smtp:
   driver = smtp
   message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}}

+.ifdef _HAVE_DANE
+  dnssec_request_domains = *
+  hosts_try_dane = *
+.endif
+.ifdef _HAVE_PRDR
+  hosts_try_prdr = *
+.endif

 
 
 # This transport is used for delivering messages to a smarthost, if the
 
 
 # This transport is used for delivering messages to a smarthost, if the


@@ -743,19 +829,28 @@ smarthost_smtp:
   # Comment out any of these which you have to, then file a Support
   # request with your smarthost provider to get things fixed:
   hosts_require_tls = *
   # Comment out any of these which you have to, then file a Support
   # request with your smarthost provider to get things fixed:
   hosts_require_tls = *

-  tls_sni = $host

   tls_verify_hosts = *
   # As long as tls_verify_hosts is enabled, this won't matter, but if you
   # have to comment it out then this will at least log whether you succeed
   # or not:
   tls_try_verify_hosts = *
   #
   tls_verify_hosts = *
   # As long as tls_verify_hosts is enabled, this won't matter, but if you
   # have to comment it out then this will at least log whether you succeed
   # or not:
   tls_try_verify_hosts = *
   #

+  # The SNI name should match the name which we'll expect to verify;
+  # many mail systems don't use SNI and this doesn't matter, but if it does,
+  # we need to send a name which the remote site will recognize.
+  # This _should_ be the name which the smarthost operators specified as
+  # the hostname for sending your mail to.
+  tls_sni = ROUTER_SMARTHOST
+  #

 .ifdef _HAVE_OPENSSL
 .ifdef _HAVE_OPENSSL

-  tls_require_ciphers = HIGH:@STRENGTH
+  tls_require_ciphers = HIGH:!aNULL:@STRENGTH

 .endif
 .ifdef _HAVE_GNUTLS
 .endif
 .ifdef _HAVE_GNUTLS

-  tls_require_ciphers = NONE:+VERS-TLS1.2:SECURE192
+  tls_require_ciphers = SECURE192:-VERS-SSL3.0:-VERS-TLS1.0:-VERS-TLS1.1
+.endif

 .endif
 .endif

+.ifdef _HAVE_PRDR
+  hosts_try_prdr = *

 .endif
 
 
 .endif