MOVE_FROZEN_MESSAGES didn't output anything for -bV.
[exim.git] / doc / doc-txt / ChangeLog
index b39c70a2cd1babcb3cec386dd076ec4aed61f006..3a03c80cc1375d213d74a0544223e760c3b76855 100644 (file)
@@ -1,8 +1,75 @@
-$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.190 2005/08/02 09:01:44 ph10 Exp $
+$Cambridge: exim/doc/doc-txt/ChangeLog,v 1.252 2005/10/20 15:19:13 ph10 Exp $
 
 Change log file for Exim from version 4.21
 -------------------------------------------
 
 
 Change log file for Exim from version 4.21
 -------------------------------------------
 
+Exim version 4.60
+-----------------
+
+PH/01 Two changes to the default runtime configuration:
+
+      (1) Move the checks for relay_from_hosts and authenticated clients from
+          after to before the (commented out) DNS black list checks.
+
+      (2) Add control=submission to the relay_from_hosts and authenticated
+          clients checks, on the grounds that messages accepted by these
+          statements are most likely to be submissions.
+
+PH/02 Several tidies to the handling of ${prvs and ${prvscheck:
+
+      (1) Generate an error if the third argument for the ${prvs expansion is
+          not a single digit.
+
+      (2) Treat a missing third argument of ${prvscheck as if it were an empty
+          string.
+
+      (3) Reset the variables that are obtained from the first argument of
+          ${prvscheck and used in the second argument before leaving the code,
+          because their memory is reclaimed, so using them afterwards may do
+          silly things.
+
+      (4) Tidy up the code for expanding the arguments of ${prvscheck one by
+          one (it's much easier than Tom thought :-).
+
+      (5) Because of (4), we can now allow for the use of $prvscheck_result
+          inside the third argument.
+
+PH/03 For some reason, the default setting of PATH when running a command from
+      a pipe transport was just "/usr/bin". I have changed it to
+      "/bin:/usr/bin".
+
+PH/04 SUPPORT_TRANSLATE_IP_ADDRESS and MOVE_FROZEN_MESSAGES did not cause
+      anything to be listed in the output from -bV.
+
+
+Exim version 4.54
+-----------------
+
+PH/01 The ${base62: operator adjusted itself to base 36 when BASE_62 was
+      set to 36 (for Darwin and Cygwin), but the ${base62d: operator did not.
+      It now does.
+
+PH/02 Two minor problems detected in Cygwin: the os.{c,h} files had lost */ on
+      the CVS lines, and there was a missing #if HAVE_IPV6 in host.c.
+
+PH/03 Typo: missing ".o" in src/pcre/Makefile.
+
+PH/04 Tighten up "personal" tests: Instead of testing for any "List-"
+      header line, restrict the check to what is listed in RFCs 2369 and 2929.
+      Also, for "Auto-Submitted", treat anything other than "no" as
+      non-personal, in accordance with RFC 3834. (Previously it treated
+      anything starting "auto-" as non-personal.)
+
+TF/01 The control=submission/name=... option had a problem with syntax
+      errors if the name included a slash character. The /name= option
+      now slurps the rest of the string, so it can include any characters
+      but it must come last in the list of options (after /sender_retain
+      or /domain=).
+
+PH/05 Some modifications to the interface to the fake nameserver for the new
+      testing suite.
+
+
 Exim version 4.53
 -----------------
 
 Exim version 4.53
 -----------------
 
@@ -35,6 +102,195 @@ PH/08 Arrange for USE_INET_NTOA_FIX to be set in config.h for AIX systems as
       well as for IRIX systems, when gcc is being used. See the host.c source
       file for comments.
 
       well as for IRIX systems, when gcc is being used. See the host.c source
       file for comments.
 
+PH/09 Installed latest Cygwin configuration files from the Cygwin maintainer.
+
+PH/10 Named domain lists were not working if used in a queue_smtp_domains
+      setting.
+
+PH/11 Added support for the IGNOREQUOTA extension to LMTP, both to the lmtp
+      transport and to the smtp transport in LMTP mode.
+
+TK/02 Remove one case of BASE64 error detection FTTB (undocumented anyway).
+
+PH/12 There was a missing call to search_tidyup() before the fork() in rda.c to
+      run a filter in a subprocess. This could lead to confusion in subsequent
+      lookups in the parent process. There should also be a search_tidyup() at
+      the end of the subprocess.
+
+PH/13 Previously, if "verify = helo" was set in an ACL, the condition was true
+      only if the host matched helo_try_verify_hosts, which caused the
+      verification to occur when the EHLO/HELO command was issued. The ACL just
+      tested the remembered result. Now, if a previous verification attempt has
+      not happened, "verify = helo" does it there and then.
+
+JJ/01 exipick: added $message_exim_id variable (see 4.53-PH/04)
+
+TK/03 Fix log output including CR from clamd.
+
+PH/14 A reference to $reply_address when Reply-to: was empty and From: did not
+      exist provoked a memory error which could cause a segfault.
+
+PH/15 Installed PCRE 6.2
+
+PH/17 Defined BIND_8_COMPAT in the Darwin os.h file.
+
+PH/18 Reversed 4.52/PH/17 because the HP-UX user found it wasn't the cause
+      of the problem. Specifically, suggested +O2 rather than +O1 for the
+      HP-UX compiler.
+
+PH/19 Added sqlite_lock_timeout option (David Woodhouse's patch).
+
+PH/20 If a delivery was routed to a non-standard port by means of an SRV
+      record, the port was not correctly logged when the outgoing_port log
+      selector was set (it logged the transort's default port).
+
+PH/21 Added support for host-specific ports to manualroute, queryprogram,
+      fallback_hosts, and "hosts" in the smtp transport.
+
+PH/22 If the log selector "outgoing_port" is set, the port is now also given on
+      host errors such as "Connection refused".
+
+PH/23 Applied a patch to fix problems with exim-4.52 while doing radius
+      authentication with radiusclient 0.4.9:
+
+      - Error returned from rc_read_config was caught wrongly
+      - Username/password not passed on to radius server due to wrong length.
+
+      The presumption is that some radiusclient API changes for 4.51/PH/17
+      were not taken care of correctly. The code is still untested by me (my
+      Linux distribution still has 0.3.2 of radiusclient), but it was
+      contributed by a Radius user.
+
+PH/24 When doing a callout, the value of $domain wasn't set correctly when
+      expanding the "port" option of the smtp transport.
+
+TK/04 MIME ACL: Fix buffer underrun that occurs when EOF condition is met
+      while reading a MIME header. Thanks to Tom Hughes for a patch.
+
+PH/24 Include config.h inside local_scan.h so that configuration settings are
+      available.
+
+PH/25 Make $smtp_command_argument available after all SMTP commands. This means
+      that in an ACL for RCPT (for example), you can examine exactly what was
+      received.
+
+PH/26 Exim was recognizing IPv6 addresses of the form [IPv6:....] in EHLO
+      commands, but it was not correctly comparing the address with the actual
+      client host address. Thus, it would show the EHLO address in Received:
+      header lines when this was not necessary.
+
+PH/27 Added the % operator to ${eval:}.
+
+PH/28 Exim tries to create and chdir to its spool directory when it starts;
+      it should be ignoring failures (because with -C, for example, it has lost
+      privilege). It wasn't ignoring creation failures other than "already
+      exists".
+
+PH/29 Added "crypteq" to the list of supported features that Exim outputs when
+      -bV or -d is used.
+
+PH/30 Fixed (presumably very longstanding) bug in exim_dbmbuild: if it failed
+      because an input line was too long, either on its own, or by virtue of
+      too many continuations, the temporary file was not being removed, and the
+      return code was incorrect.
+
+PH/31 Missing "BOOL" in function definition in filtertest.c.
+
+PH/32 Applied Sieve patches from the maintainer.
+
+TK/05 Domainkeys: Accomodate for a minor API change in libdomainkeys 0.67.
+
+PH/33 Added "verify = not_blind".
+
+PH/34 There are settings for CHOWN_COMMAND and MV_COMMAND that can be used in
+      Local/Makefile (with some defaults set). These are used in built scripts
+      such as exicyclog, but they have never been used in the exim_install
+      script (though there are many overriding facilities there). I have
+      arranged that the exim_install script now takes note of these two
+      settings.
+
+PH/35 Installed configuration files for Dragonfly.
+
+PH/36 When a locally submitted message by a trusted user did not contain a
+      From: header, and the sender address was obtained from -f or from an SMTP
+      MAIL command, and the trusted user did not use -F to supply a sender
+      name, $originator_name was incorrectly used when constructing a From:
+      header. Furthermore, $originator_name was used for submission mode
+      messages from external hosts without From: headers in a similar way,
+      which is clearly wrong.
+
+PH/37 Added control=suppress_local_fixups.
+
+PH/38 When log_selector = +received_sender was set, and the addition of the
+      sender made the log line's construction buffer exactly full, or one byte
+      less than full, an overflow happened when the terminating "\n" was
+      subsequently added.
+
+PH/39 Added a new log selector, "unknown_in_list", which provokes a log entry
+      when the result of a list match is failure because a DNS lookup failed.
+
+PH/40 RM_COMMAND is now used in the building process.
+
+PH/41 Added a "distclean" target to the top-level Makefile; it deletes all
+      the "build-* directories that it finds.
+
+PH/42 (But a TF fix): In a domain list, Exim incorrectly matched @[] if the IP
+      address in a domain literal was a prefix of an interface address.
+
+PH/43 (Again a TF fix): In the dnslookup router, do not apply widen_domains
+      when verifying a sender address, unless rewrite_headers is false.
+
+PH/44 Wrote a long comment about why errors_to addresses are verified as
+      recipients, not senders.
+
+TF/01 Add missing LIBS=-lm to OS/Makefile-OpenBSD which was overlooked when
+      the ratelimit ACL was added.
+
+PH/45 Added $smtp_command for the full command (cf $smtp_command_argument).
+
+PH/46 Added extra information about PostgreSQL errors to the error string.
+
+PH/47 Added an interface to a fake DNS resolver for use by the new test suite,
+      avoiding the need to install special zones in a real server. This is
+      backwards compatible; if it can't find the fake resolver, it drops back.
+      Thus, both old and new test suites can be run.
+
+TF/02 Added util/ratelimit.pl
+
+TF/03 Minor fix to the ratelimit code to improve its behaviour in case the
+      clock is set back in time.
+
+TF/04 Fix the ratelimit support in exim_fixdb. Patch provided by Brian
+      Candler <B.Candler@pobox.com>.
+
+TF/05 The fix for PH/43 was not completely correct; widen_domains is always
+      OK for addresses that are the result of redirections.
+
+PH/48 A number of further additions for the benefit of the new test suite,
+      including a fake gethostbyname() that interfaces to the fake DNS resolver
+      (see PH/47 above).
+
+TF/06 The fix for widen_domains has also been applied to qualify_single and
+      search_parents which are the other dnslookup options that can cause
+      header rewrites.
+
+PH/49 Michael Haardt's randomized retrying, but as a separate retry parameter
+      type ("H").
+
+PH/50 Make never_users, trusted_users, admin_groups, trusted_groups expandable.
+
+TF/07 Exim produced the error message "an SRV record indicated no SMTP
+      service" if it encountered an MX record with an empty target hostname.
+      The message is now "an MX or SRV record indicated no SMTP service".
+
+TF/08 Change PH/13 introduced the possibility that verify=helo may defer,
+      if the DNS of the sending site is misconfigured. This is quite a
+      common situation. This change restores the behaviour of treating a
+      helo verification defer as a failure.
+
+PH/51 If self=fail was set on a router, the bounce message did not include the
+      actual error message.
+
 
 Exim version 4.52
 -----------------
 
 Exim version 4.52
 -----------------