Event for auth fail

[exim.git] / doc / doc-txt / NewStuff

diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff
index 4ae49c2faa72122f2dc3177b4b32c2d7ff059ede..bd7f02cfaf3415032b7f033c4dbb07c1acdaf7e9 100644 (file)
--- a/doc/doc-txt/NewStuff
+++ b/doc/doc-txt/NewStuff
@@ -6,6 +6,95 @@ Before a formal release, there may be quite a lot of detail so that people can
 test from the snapshots or the Git before the documentation is updated. Once
 the documentation is updated, this file is reduced to a short list.
 
 test from the snapshots or the Git before the documentation is updated. Once
 the documentation is updated, this file is reduced to a short list.
 

+Version 4.97
+------------
+
+ 1. The expansion-test faciility (exim -be) can set variables.
+
+ 2. An event on a failing SMTP AUTH, server side.
+
+Version 4.96
+------------
+
+ 1. A new ACL condition: seen. Records/tests a timestamp against a key.
+
+ 2. A variant of the "mask" expansion operator to give normalised IPv6.
+
+ 3. UTC output option for exim_dumpdb, exim_fixdb.
+
+ 4. An event for failing TLS connects to the daemon.
+
+ 5. The ACL "debug" control gains options "stop", "pretrigger" and "trigger".
+
+ 6. Query-style lookups are now checked for quoting, if the query string is
+    built using untrusted data ("tainted").  For now lack of quoting is merely
+    logged; a future release will upgrade this to an error.
+
+ 7. The expansion conditions match_<list-type> and inlist now set $value for
+    the expansion of the "true" result of the ${if}.  With a static list, this
+    can be used for de-tainting.
+
+ 8. Recipient verify callouts now set $domain_data & $local_part_data, with
+    de-tainted values.
+
+Version 4.95
+------------
+
+ 1. The fast-ramp two phase queue run support, previously experimental, is
+    now supported by default.
+
+ 2. The native SRS support, previously experimental, is now supported. It is
+    not built unless specified in the Local/Makefile.
+
+ 3. TLS resumption support, previously experimental, is now supported and
+    included in default builds.
+
+ 4. Single-key LMDB lookups, previously experimental, are now supported.
+    The support is not built unless specified in the Local/Makefile.
+
+ 5. Option "message_linelength_limit" on the smtp transport to enforce (by
+    default) the RFC 998 character limit.
+
+ 6. An option to ignore the cache on a lookup.
+
+ 7. Quota checking during reception (i.e. at SMTP time) for appendfile-
+    transport-managed quotas.
+
+ 8. Sqlite lookups accept a "file=<path>" option to specify a per-operation
+    db file, replacing the previous prefix to the SQL string (which had
+    issues when the SQL used tainted values).
+
+ 9. Lsearch lookups accept a "ret=full" option, to return both the portion
+    of the line matching the key, and the remainder.
+
+10. A command-line option to have a daemon not create a notifier socket.
+
+11. Faster TLS startup.  When various configuration options contain no
+    expandable elements, the information can be preloaded and cached rather
+    than the previous behaviour of always loading at startup time for every
+    connection.  This helps particularly for the CA bundle.
+
+12. Proxy Protocol Timeout is configurable via "proxy_protocol_timeout"
+    main config option.
+
+13. Option "smtp_accept_max_per_connection" is now expanded.
+
+14. Log selector "queue_time_exclusive", enabled by default, to exclude the
+    time taken for reception from QT log elements.
+
+15. Main option "smtp_backlog_monitor", to set a level above which listen
+    socket backlogs are logged.
+
+16. Main option "hosts_require_helo", requiring HELO or EHLO before MAIL.
+
+17. A main config option "allow_insecure_tainted_data" allows to turn
+
+18. TLS ALPN handling.  By default, refuse TLS connections that try to specify
+    a non-smtp (eg. http) use.  Options for customising.
+
+19. Support for MacOS (darwin) has been dropped.
+
+

 Version 4.94
 ------------
 
 Version 4.94
 ------------
 


@@ -17,48 +106,63 @@ Version 4.94
 
  3. A msg:defer event.
 
 
  3. A msg:defer event.
 

- 4. Client-side support in the gsasl authenticator.  Tested against the 
+ 4. Client-side support in the gsasl authenticator.  Tested against the

     plaintext driver for PLAIN; only against itself for SCRAM-SHA-1 and
     SCRAM-SHA-1-PLUS methods.
 
  5. Server-side support in the gsasl authenticator for encrypted passwords, as
     an alternate for the existing plaintext.
 
     plaintext driver for PLAIN; only against itself for SCRAM-SHA-1 and
     SCRAM-SHA-1-PLUS methods.
 
  5. Server-side support in the gsasl authenticator for encrypted passwords, as
     an alternate for the existing plaintext.
 

- 6. Variable $local_part_verified, set by the router check_local_part condition
-    with untainted data.
+ 6. Variable $local_part_data now also set by router check_local_user option,
+    with an de-tainted version of $local_part.

 
  7. Named-list definitions can now be prefixed "hide" so that "-bP" commands do
     not output the content.  Previously this could only be done on options.
 
 
  7. Named-list definitions can now be prefixed "hide" so that "-bP" commands do
     not output the content.  Previously this could only be done on options.
 

- 8. As an exerimental feature, the dovecot authenticatino driver supports inet
+ 8. As an experimental feature, the dovecot authentication driver supports inet

     sockets.  Previously it was unix-domain sockets only.
 
  9. The ACL control "queue_only" can also be spelled "queue", and now takes an
     option "first_pass_route" to do the same as a "-odqs" on the command line.
 
     sockets.  Previously it was unix-domain sockets only.
 
  9. The ACL control "queue_only" can also be spelled "queue", and now takes an
     option "first_pass_route" to do the same as a "-odqs" on the command line.
 

- 9. Items specified for the router and transport headers_remove option can use
+10. Items specified for the router and transport headers_remove option can use

     a trailing asterisk to specify globbing.
 
     a trailing asterisk to specify globbing.
 

-10. New $queue_size variable.
+11. New $queue_size variable.

 
 

-11. New variables $local_part_{pre,suf}fix_v.
+12. New variables $local_part_{pre,suf}fix_v.

 
 

-12. New main option "sqlite_dbfile", for use in preference to prefixing the
+13. New main option "sqlite_dbfile", for use in preference to prefixing the

     lookup string.  The older method fails when tainted variables are used
     in the lookup, as the filename becomes tainted.  The new method keeps the
     filename separate.
 
     lookup string.  The older method fails when tainted variables are used
     in the lookup, as the filename becomes tainted.  The new method keeps the
     filename separate.
 

-13. Options on the dsearch lookup, to return the full path and to filter
+14. Options on the dsearch lookup, to return the full path and to filter

     filetypes for matching.
 
     filetypes for matching.
 

-14. Options on pgsql and mysql lookups, to specify server separate from the
+15. Options on pgsql and mysql lookups, to specify server separate from the

     lookup string.
 
     lookup string.
 

-15. Expansion item ${listquote {<char} {<item>}}.
+16. An option on all single-key lookups, to return (on a hit) a de-tainted
+    version of the lookup key rather than the looked-up data.

 
 

-16. An option for the ${readsocket {}{}{}} expansion to make the result data
+17. $domain_data and $local_part_data are now set by all list-match successes.
+    Previously only list items that performed lookups did so.
+    Also, matching list items that are tail-match or RE-match now set the
+    numeric variables $0 (etc) in the same way os other RE matches.
+
+18. Expansion item ${listquote {<char} {<item>}}.
+
+19. An option for the ${readsocket {}{}{}} expansion to make the result data

     cacheable.
 
     cacheable.
 

+20. dkim_verify_min_keysizes, a list of minimum acceptable public-key sizes.
+
+21. bounce_message_file and warn_message_file are now expanded before use.
+
+22. New main config option spf_smtp_comment_template to customise the
+    $spf_smtp_comment variable
+

 
 
 Version 4.93
 
 
 Version 4.93


@@ -99,7 +203,7 @@ Version 4.93
 15: Support under OpenSSL for writing NSS-style key files for packet-capture
     decode.  The environment variable SSLKEYLOGFILE is used; if an absolute path
     it must indicate a file under the spool directory; if relative the the spool
 15: Support under OpenSSL for writing NSS-style key files for packet-capture
     decode.  The environment variable SSLKEYLOGFILE is used; if an absolute path
     it must indicate a file under the spool directory; if relative the the spool

-    directory is prepended.  Works on the server side only.  Support under 
+    directory is prepended.  Works on the server side only.  Support under

     GnuTLS was already there, being done purely by the library (server side
     only, and exim must be run as root).
 
     GnuTLS was already there, being done purely by the library (server side
     only, and exim must be run as root).