* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2014 */
+/* Copyright (c) University of Cambridge 1995 - 2015 */
/* See the file NOTICE for conditions of use and distribution. */
/* Functions for handling an incoming SMTP call. */
#include "exim.h"
+#include <assert.h>
/* Initialize for TCP wrappers if so configured. It appears that the macro
VRFY_CMD, EXPN_CMD, NOOP_CMD, /* RFC as requiring synchronization */
ETRN_CMD, /* This by analogy with TURN from the RFC */
STARTTLS_CMD, /* Required by the STARTTLS RFC */
+ TLS_AUTH_CMD, /* auto-command at start of SSL */
/* This is a dummy to identify the non-sync commands when pipelining */
#ifdef SUPPORT_TLS
static BOOL tls_advertised;
#endif
-#ifdef EXPERIMENTAL_DSN
static BOOL dsn_advertised;
-#endif
static BOOL esmtp;
static BOOL helo_required = FALSE;
static BOOL helo_verify = FALSE;
static BOOL rcpt_in_progress;
static int nonmail_command_count;
static BOOL smtp_exit_function_called = 0;
+#ifdef EXPERIMENTAL_INTERNATIONAL
+static BOOL smtputf8_advertised;
+#endif
static int synprot_error_count;
static int unknown_command_count;
static int sync_cmd_limit;
forced TRUE, to allow for the re-authentication that can happen at that point.
QUIT is also "falsely" labelled as a mail command so that it doesn't up the
-count of non-mail commands and possibly provoke an error. */
+count of non-mail commands and possibly provoke an error.
+
+tls_auth is a pseudo-command, never expected in input. It is activated
+on TLS startup and looks for a tls authenticator. */
static smtp_cmd_list cmd_list[] = {
+ /* name len cmd has_arg is_mail_cmd */
+
{ "rset", sizeof("rset")-1, RSET_CMD, FALSE, FALSE }, /* First */
{ "helo", sizeof("helo")-1, HELO_CMD, TRUE, FALSE },
{ "ehlo", sizeof("ehlo")-1, EHLO_CMD, TRUE, FALSE },
{ "auth", sizeof("auth")-1, AUTH_CMD, TRUE, TRUE },
#ifdef SUPPORT_TLS
{ "starttls", sizeof("starttls")-1, STARTTLS_CMD, FALSE, FALSE },
+ { "tls_auth", 0, TLS_AUTH_CMD, FALSE, TRUE },
#endif
/* If you change anything above here, also fix the definitions below. */
#define CMD_LIST_EHLO 2
#define CMD_LIST_AUTH 3
#define CMD_LIST_STARTTLS 4
+#define CMD_LIST_TLS_AUTH 5
/* This list of names is used for performing the smtp_no_mail logging action.
It must be kept in step with the SCH_xxx enumerations. */
US"HELP", US"MAIL", US"NOOP", US"QUIT", US"RCPT", US"RSET", US"STARTTLS",
US"VRFY" };
-static uschar *protocols[] = {
+static uschar *protocols_local[] = {
US"local-smtp", /* HELO */
US"local-smtps", /* The rare case EHLO->STARTTLS->HELO */
US"local-esmtp", /* EHLO */
US"local-esmtpa", /* EHLO->AUTH */
US"local-esmtpsa" /* EHLO->STARTTLS->EHLO->AUTH */
};
+static uschar *protocols[] = {
+ US"smtp", /* HELO */
+ US"smtps", /* The rare case EHLO->STARTTLS->HELO */
+ US"esmtp", /* EHLO */
+ US"esmtps", /* EHLO->STARTTLS->EHLO */
+ US"esmtpa", /* EHLO->AUTH */
+ US"esmtpsa" /* EHLO->STARTTLS->EHLO->AUTH */
+ };
#define pnormal 0
#define pextend 2
#define pcrpted 1 /* added to pextend or pnormal */
#define pauthed 2 /* added to pextend */
-#define pnlocal 6 /* offset to remove "local" */
/* Sanity check and validate optional args to MAIL FROM: envelope */
enum {
+ ENV_MAIL_OPT_NULL,
ENV_MAIL_OPT_SIZE, ENV_MAIL_OPT_BODY, ENV_MAIL_OPT_AUTH,
#ifndef DISABLE_PRDR
ENV_MAIL_OPT_PRDR,
#endif
-#ifdef EXPERIMENTAL_DSN
ENV_MAIL_OPT_RET, ENV_MAIL_OPT_ENVID,
+#ifdef EXPERIMENTAL_INTERNATIONAL
+ ENV_MAIL_OPT_UTF8,
#endif
- ENV_MAIL_OPT_NULL
};
typedef struct {
uschar * name; /* option requested during MAIL cmd */
#ifndef DISABLE_PRDR
{ US"PRDR", ENV_MAIL_OPT_PRDR, FALSE },
#endif
-#ifdef EXPERIMENTAL_DSN
{ US"RET", ENV_MAIL_OPT_RET, TRUE },
{ US"ENVID", ENV_MAIL_OPT_ENVID, TRUE },
+#ifdef EXPERIMENTAL_INTERNATIONAL
+ { US"SMTPUTF8",ENV_MAIL_OPT_UTF8, FALSE }, /* rfc6531 */
#endif
- { US"NULL", ENV_MAIL_OPT_NULL, FALSE }
+ /* keep this the last entry */
+ { US"NULL", ENV_MAIL_OPT_NULL, FALSE },
};
/* When reading SMTP from a remote host, we have to use our own versions of the
continue;
}
#endif
- if (strncmpic(smtp_cmd_buffer, US p->name, p->len) == 0 &&
- (smtp_cmd_buffer[p->len-1] == ':' || /* "mail from:" or "rcpt to:" */
- smtp_cmd_buffer[p->len] == 0 ||
- smtp_cmd_buffer[p->len] == ' '))
+ if ( p->len
+ && strncmpic(smtp_cmd_buffer, US p->name, p->len) == 0
+ && ( smtp_cmd_buffer[p->len-1] == ':' /* "mail from:" or "rcpt to:" */
+ || smtp_cmd_buffer[p->len] == 0
+ || smtp_cmd_buffer[p->len] == ' '
+ ) )
{
if (smtp_inptr < smtp_inend && /* Outstanding input */
p->cmd < sync_cmd_limit && /* Command should sync */
if (is_inetd)
return string_sprintf("SMTP connection from %s (via inetd)", hostname);
-if ((log_extra_selector & LX_incoming_interface) != 0 &&
- interface_address != NULL)
+if (LOGGING(incoming_interface) && interface_address != NULL)
return string_sprintf("SMTP connection from %s I=[%s]:%d", hostname,
interface_address, interface_port);
int size = sizep ? *sizep : 0;
int ptr = ptrp ? *ptrp : 0;
- if ((log_extra_selector & LX_tls_cipher) != 0 && tls_in.cipher != NULL)
+ if (LOGGING(tls_cipher) && tls_in.cipher != NULL)
s = string_append(s, &size, &ptr, 2, US" X=", tls_in.cipher);
- if ((log_extra_selector & LX_tls_certificate_verified) != 0 &&
- tls_in.cipher != NULL)
+ if (LOGGING(tls_certificate_verified) && tls_in.cipher != NULL)
s = string_append(s, &size, &ptr, 2, US" CV=",
tls_in.certificate_verified? "yes":"no");
- if ((log_extra_selector & LX_tls_peerdn) != 0 && tls_in.peerdn != NULL)
+ if (LOGGING(tls_peerdn) && tls_in.peerdn != NULL)
s = string_append(s, &size, &ptr, 3, US" DN=\"",
string_printing(tls_in.peerdn), US"\"");
- if ((log_extra_selector & LX_tls_sni) != 0 && tls_in.sni != NULL)
+ if (LOGGING(tls_sni) && tls_in.sni != NULL)
s = string_append(s, &size, &ptr, 3, US" SNI=\"",
string_printing(tls_in.sni), US"\"");
int size, ptr, i;
uschar *s, *sep;
-if (smtp_mailcmd_count > 0 || (log_extra_selector & LX_smtp_no_mail) == 0)
+if (smtp_mailcmd_count > 0 || !LOGGING(smtp_no_mail))
return;
s = NULL;
memset(sender_address_cache, 0, sizeof(sender_address_cache));
memset(sender_domain_cache, 0, sizeof(sender_domain_cache));
-#ifdef EXPERIMENTAL_DSN
+#ifndef DISABLE_PRDR
+prdr_requested = FALSE;
+#endif
+
/* Reset the DSN flags */
dsn_ret = 0;
dsn_envid = NULL;
-#endif
authenticated_sender = NULL;
#ifdef EXPERIMENTAL_BRIGHTMAIL
spf_result = NULL;
spf_smtp_comment = NULL;
#endif
+#ifdef EXPERIMENTAL_INTERNATIONAL
+message_smtputf8 = FALSE;
+#endif
body_linecount = body_zerocount = 0;
sender_rate = sender_rate_limit = sender_rate_period = NULL;
it is the canonical extracted address which is all that is kept. */
case MAIL_CMD:
+ smtp_mailcmd_count++; /* Count for no-mail log */
if (sender_address != NULL)
/* The function moan_smtp_batch() does not return. */
moan_smtp_batch(smtp_cmd_buffer, "503 Sender already given");
tls_in.ocsp = OCSP_NOT_REQ;
tls_advertised = FALSE;
#endif
-#ifdef EXPERIMENTAL_DSN
dsn_advertised = FALSE;
+#ifdef EXPERIMENTAL_INTERNATIONAL
+smtputf8_advertised = FALSE;
#endif
/* Reset ACL connection variables */
else
received_protocol =
- protocols[pnormal] + ((sender_host_address != NULL)? pnlocal : 0);
+ (sender_host_address ? protocols : protocols_local) [pnormal];
/* Set up the buffer for inputting using direct read() calls, and arrange to
call the local functions instead of the standard C ones. */
set_process_info("handling incoming connection from %s",
host_and_ident(FALSE));
+ /* Expand smtp_receive_timeout, if needed */
+
+ if (smtp_receive_timeout_s)
+ {
+ uschar * exp;
+ if ( !(exp = expand_string(smtp_receive_timeout_s))
+ || !(*exp)
+ || (smtp_receive_timeout = readconf_readtime(exp, 0, FALSE)) < 0
+ )
+ log_write(0, LOG_MAIN|LOG_PANIC,
+ "bad value for smtp_receive_timeout: '%s'", exp ? exp : US"");
+ }
+
/* Start up TLS if tls_on_connect is set. This is for supporting the legacy
smtps port for use with older style SSL MTAs. */
yield = 1;
log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
"syntax or protocol errors (last command was \"%s\")",
- host_and_ident(FALSE), smtp_cmd_buffer);
+ host_and_ident(FALSE), string_printing(smtp_cmd_buffer));
}
if (code > 0)
incomplete_transaction_log(uschar *what)
{
if (sender_address == NULL || /* No transaction in progress */
- (log_write_selector & L_smtp_incomplete_transaction) == 0 /* Not logging */
- ) return;
+ !LOGGING(smtp_incomplete_transaction))
+ return;
/* Build list of recipients for logging */
setflag(sender_verified_failed, af_sverify_told);
- if (rc != FAIL || (log_extra_selector & LX_sender_verify_fail) != 0)
+ if (rc != FAIL || LOGGING(sender_verify_fail))
log_write(0, LOG_MAIN|LOG_REJECT, "%s sender verify %s for <%s>%s",
host_and_ident(TRUE),
((sender_verified_failed->special_action & 255) == DEFER)? "defer":"fail",
/* If a host name is known, check it and all its aliases. */
- if (sender_host_name != NULL)
- {
- helo_verified = strcmpic(sender_host_name, sender_helo_name) == 0;
-
- if (helo_verified)
+ if (sender_host_name)
+ if ((helo_verified = strcmpic(sender_host_name, sender_helo_name) == 0))
{
+ sender_helo_dnssec = sender_host_dnssec;
HDEBUG(D_receive) debug_printf("matched host name\n");
}
else
{
uschar **aliases = sender_host_aliases;
- while (*aliases != NULL)
- {
- helo_verified = strcmpic(*aliases++, sender_helo_name) == 0;
- if (helo_verified) break;
- }
- HDEBUG(D_receive)
- {
- if (helo_verified)
+ while (*aliases)
+ if ((helo_verified = strcmpic(*aliases++, sender_helo_name) == 0))
+ {
+ sender_helo_dnssec = sender_host_dnssec;
+ break;
+ }
+
+ HDEBUG(D_receive) if (helo_verified)
debug_printf("matched alias %s\n", *(--aliases));
- }
}
- }
/* Final attempt: try a forward lookup of the helo name */
{
int rc;
host_item h;
+ dnssec_domains d;
+ host_item *hh;
+
h.name = sender_helo_name;
h.address = NULL;
h.mx = MX_NONE;
h.next = NULL;
+ d.request = US"*";
+ d.require = US"";
+
HDEBUG(D_receive) debug_printf("getting IP address for %s\n",
sender_helo_name);
- rc = host_find_byname(&h, NULL, 0, NULL, TRUE);
+ rc = host_find_bydns(&h, NULL, HOST_FIND_BY_A,
+ NULL, NULL, NULL, &d, NULL, NULL);
if (rc == HOST_FOUND || rc == HOST_FOUND_LOCAL)
- {
- host_item *hh = &h;
- while (hh != NULL)
- {
+ for (hh = &h; hh; hh = hh->next)
if (Ustrcmp(hh->address, sender_host_address) == 0)
{
helo_verified = TRUE;
+ if (h.dnssec == DS_YES) sender_helo_dnssec = TRUE;
HDEBUG(D_receive)
- debug_printf("IP address for %s matches calling address\n",
- sender_helo_name);
+ {
+ debug_printf("IP address for %s matches calling address\n"
+ "Forward DNS security status: %sverified\n",
+ sender_helo_name, sender_helo_dnssec ? "" : "un");
+ }
break;
}
- hh = hh->next;
- }
- }
}
}
+static int
+smtp_in_auth(auth_instance *au, uschar ** s, uschar ** ss)
+{
+const uschar *set_id = NULL;
+int rc, i;
+
+/* Run the checking code, passing the remainder of the command line as
+data. Initials the $auth<n> variables as empty. Initialize $0 empty and set
+it as the only set numerical variable. The authenticator may set $auth<n>
+and also set other numeric variables. The $auth<n> variables are preferred
+nowadays; the numerical variables remain for backwards compatibility.
+
+Afterwards, have a go at expanding the set_id string, even if
+authentication failed - for bad passwords it can be useful to log the
+userid. On success, require set_id to expand and exist, and put it in
+authenticated_id. Save this in permanent store, as the working store gets
+reset at HELO, RSET, etc. */
+
+for (i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL;
+expand_nmax = 0;
+expand_nlength[0] = 0; /* $0 contains nothing */
+
+rc = (au->info->servercode)(au, smtp_cmd_data);
+if (au->set_id) set_id = expand_string(au->set_id);
+expand_nmax = -1; /* Reset numeric variables */
+for (i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL; /* Reset $auth<n> */
+
+/* The value of authenticated_id is stored in the spool file and printed in
+log lines. It must not contain binary zeros or newline characters. In
+normal use, it never will, but when playing around or testing, this error
+can (did) happen. To guard against this, ensure that the id contains only
+printing characters. */
+
+if (set_id) set_id = string_printing(set_id);
+
+/* For the non-OK cases, set up additional logging data if set_id
+is not empty. */
+
+if (rc != OK)
+ set_id = set_id && *set_id
+ ? string_sprintf(" (set_id=%s)", set_id) : US"";
+
+/* Switch on the result */
+
+switch(rc)
+ {
+ case OK:
+ if (!au->set_id || set_id) /* Complete success */
+ {
+ if (set_id) authenticated_id = string_copy_malloc(set_id);
+ sender_host_authenticated = au->name;
+ authentication_failed = FALSE;
+ authenticated_fail_id = NULL; /* Impossible to already be set? */
+
+ received_protocol =
+ (sender_host_address ? protocols : protocols_local)
+ [pextend + pauthed + (tls_in.active >= 0 ? pcrpted:0)];
+ *s = *ss = US"235 Authentication succeeded";
+ authenticated_by = au;
+ break;
+ }
+
+ /* Authentication succeeded, but we failed to expand the set_id string.
+ Treat this as a temporary error. */
+
+ auth_defer_msg = expand_string_message;
+ /* Fall through */
+
+ case DEFER:
+ if (set_id) authenticated_fail_id = string_copy_malloc(set_id);
+ *s = string_sprintf("435 Unable to authenticate at present%s",
+ auth_defer_user_msg);
+ *ss = string_sprintf("435 Unable to authenticate at present%s: %s",
+ set_id, auth_defer_msg);
+ break;
+
+ case BAD64:
+ *s = *ss = US"501 Invalid base64 data";
+ break;
+
+ case CANCELLED:
+ *s = *ss = US"501 Authentication cancelled";
+ break;
+
+ case UNEXPECTED:
+ *s = *ss = US"553 Initial data not expected";
+ break;
+
+ case FAIL:
+ if (set_id) authenticated_fail_id = string_copy_malloc(set_id);
+ *s = US"535 Incorrect authentication data";
+ *ss = string_sprintf("535 Incorrect authentication data%s", set_id);
+ break;
+
+ default:
+ if (set_id) authenticated_fail_id = string_copy_malloc(set_id);
+ *s = US"435 Internal error";
+ *ss = string_sprintf("435 Internal error%s: return %d from authentication "
+ "check", set_id, rc);
+ break;
+ }
+
+return rc;
+}
+
+
+
/*************************************************
* Initialize for SMTP incoming message *
*************************************************/
cmd_list[CMD_LIST_EHLO].is_mail_cmd = TRUE;
#ifdef SUPPORT_TLS
cmd_list[CMD_LIST_STARTTLS].is_mail_cmd = TRUE;
+cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = TRUE;
#endif
/* Set the local signal handler for SIGTERM - it tries to end off tidily */
while (done <= 0)
{
- uschar **argv;
+ const uschar **argv;
uschar *etrn_command;
uschar *etrn_serialize_key;
uschar *errmess;
uschar *user_msg = NULL;
uschar *recipient = NULL;
uschar *hello = NULL;
- uschar *set_id = NULL;
uschar *s, *ss;
BOOL was_rej_mail = FALSE;
BOOL was_rcpt = FALSE;
pid_t pid;
int start, end, sender_domain, recipient_domain;
int ptr, size, rc;
- int c, i;
+ int c;
auth_instance *au;
-#ifdef EXPERIMENTAL_DSN
uschar *orcpt = NULL;
int flags;
+
+#if defined(SUPPORT_TLS) && defined(AUTH_TLS)
+ /* Check once per STARTTLS or SSL-on-connect for a TLS AUTH */
+ if ( tls_in.active >= 0
+ && tls_in.peercert
+ && tls_in.certificate_verified
+ && cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd
+ )
+ {
+ cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = FALSE;
+ if (acl_smtp_auth)
+ {
+ rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth, &user_msg, &log_msg);
+ if (rc != OK)
+ {
+ done = smtp_handle_acl_fail(ACL_WHERE_AUTH, rc, user_msg, log_msg);
+ continue;
+ }
+ }
+
+ for (au = auths; au; au = au->next)
+ if (strcmpic(US"tls", au->driver_name) == 0)
+ {
+ smtp_cmd_data = NULL;
+
+ if (smtp_in_auth(au, &s, &ss) == OK)
+ DEBUG(D_auth) debug_printf("tls auth succeeded\n");
+ else
+ DEBUG(D_auth) debug_printf("tls auth not succeeded\n");
+ break;
+ }
+ }
#endif
switch(smtp_read_command(TRUE))
US"AUTH command used when not advertised");
break;
}
- if (sender_host_authenticated != NULL)
+ if (sender_host_authenticated)
{
done = synprot_error(L_smtp_protocol_error, 503, NULL,
US"already authenticated");
break;
}
- if (sender_address != NULL)
+ if (sender_address)
{
done = synprot_error(L_smtp_protocol_error, 503, NULL,
US"not permitted in mail transaction");
/* Check the ACL */
- if (acl_smtp_auth != NULL)
+ if (acl_smtp_auth)
{
rc = acl_check(ACL_WHERE_AUTH, NULL, acl_smtp_auth, &user_msg, &log_msg);
if (rc != OK)
as a server and which has been advertised (unless, sigh, allow_auth_
unadvertised is set). */
- for (au = auths; au != NULL; au = au->next)
- {
+ for (au = auths; au; au = au->next)
if (strcmpic(s, au->public_name) == 0 && au->server &&
- (au->advertised || allow_auth_unadvertised)) break;
- }
-
- if (au == NULL)
- {
- done = synprot_error(L_smtp_protocol_error, 504, NULL,
- string_sprintf("%s authentication mechanism not supported", s));
- break;
- }
-
- /* Run the checking code, passing the remainder of the command line as
- data. Initials the $auth<n> variables as empty. Initialize $0 empty and set
- it as the only set numerical variable. The authenticator may set $auth<n>
- and also set other numeric variables. The $auth<n> variables are preferred
- nowadays; the numerical variables remain for backwards compatibility.
-
- Afterwards, have a go at expanding the set_id string, even if
- authentication failed - for bad passwords it can be useful to log the
- userid. On success, require set_id to expand and exist, and put it in
- authenticated_id. Save this in permanent store, as the working store gets
- reset at HELO, RSET, etc. */
+ (au->advertised || allow_auth_unadvertised))
+ break;
- for (i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL;
- expand_nmax = 0;
- expand_nlength[0] = 0; /* $0 contains nothing */
-
- c = (au->info->servercode)(au, smtp_cmd_data);
- if (au->set_id != NULL) set_id = expand_string(au->set_id);
- expand_nmax = -1; /* Reset numeric variables */
- for (i = 0; i < AUTH_VARS; i++) auth_vars[i] = NULL; /* Reset $auth<n> */
-
- /* The value of authenticated_id is stored in the spool file and printed in
- log lines. It must not contain binary zeros or newline characters. In
- normal use, it never will, but when playing around or testing, this error
- can (did) happen. To guard against this, ensure that the id contains only
- printing characters. */
-
- if (set_id != NULL) set_id = string_printing(set_id);
-
- /* For the non-OK cases, set up additional logging data if set_id
- is not empty. */
-
- if (c != OK)
+ if (au)
{
- if (set_id != NULL && *set_id != 0)
- set_id = string_sprintf(" (set_id=%s)", set_id);
- else set_id = US"";
- }
+ c = smtp_in_auth(au, &s, &ss);
- /* Switch on the result */
-
- switch(c)
- {
- case OK:
- if (au->set_id == NULL || set_id != NULL) /* Complete success */
- {
- if (set_id != NULL) authenticated_id = string_copy_malloc(set_id);
- sender_host_authenticated = au->name;
- authentication_failed = FALSE;
- authenticated_fail_id = NULL; /* Impossible to already be set? */
- received_protocol =
- protocols[pextend + pauthed + ((tls_in.active >= 0)? pcrpted:0)] +
- ((sender_host_address != NULL)? pnlocal : 0);
- s = ss = US"235 Authentication succeeded";
- authenticated_by = au;
- break;
- }
-
- /* Authentication succeeded, but we failed to expand the set_id string.
- Treat this as a temporary error. */
-
- auth_defer_msg = expand_string_message;
- /* Fall through */
-
- case DEFER:
- if (set_id != NULL) authenticated_fail_id = string_copy_malloc(set_id);
- s = string_sprintf("435 Unable to authenticate at present%s",
- auth_defer_user_msg);
- ss = string_sprintf("435 Unable to authenticate at present%s: %s",
- set_id, auth_defer_msg);
- break;
-
- case BAD64:
- s = ss = US"501 Invalid base64 data";
- break;
-
- case CANCELLED:
- s = ss = US"501 Authentication cancelled";
- break;
-
- case UNEXPECTED:
- s = ss = US"553 Initial data not expected";
- break;
-
- case FAIL:
- if (set_id != NULL) authenticated_fail_id = string_copy_malloc(set_id);
- s = US"535 Incorrect authentication data";
- ss = string_sprintf("535 Incorrect authentication data%s", set_id);
- break;
-
- default:
- if (set_id != NULL) authenticated_fail_id = string_copy_malloc(set_id);
- s = US"435 Internal error";
- ss = string_sprintf("435 Internal error%s: return %d from authentication "
- "check", set_id, c);
- break;
+ smtp_printf("%s\r\n", s);
+ if (c != OK)
+ log_write(0, LOG_MAIN|LOG_REJECT, "%s authenticator failed for %s: %s",
+ au->name, host_and_ident(FALSE), ss);
}
-
- smtp_printf("%s\r\n", s);
- if (c != OK)
- log_write(0, LOG_MAIN|LOG_REJECT, "%s authenticator failed for %s: %s",
- au->name, host_and_ident(FALSE), ss);
+ else
+ done = synprot_error(L_smtp_protocol_error, 504, NULL,
+ string_sprintf("%s authentication mechanism not supported", s));
break; /* AUTH_CMD */
{
log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
"syntax or protocol errors (last command was \"%s\")",
- host_and_ident(FALSE), smtp_cmd_buffer);
+ host_and_ident(FALSE), string_printing(smtp_cmd_buffer));
done = 1;
}
if (sender_host_name == NULL &&
(deliver_domain = sender_helo_name, /* set $domain */
- match_isinlist(sender_helo_name, &helo_lookup_domains, 0,
+ match_isinlist(sender_helo_name, CUSS &helo_lookup_domains, 0,
&domainlist_anchor, NULL, MCL_DOMAIN, TRUE, NULL)) == OK)
(void)host_name_lookup();
now obsolescent, since the verification can now be requested selectively
at ACL time. */
- helo_verified = helo_verify_failed = FALSE;
+ helo_verified = helo_verify_failed = sender_helo_dnssec = FALSE;
if (helo_required || helo_verify)
{
BOOL tempfail = !smtp_verify_helo();
auth_advertised = FALSE;
pipelining_advertised = FALSE;
- #ifdef SUPPORT_TLS
+#ifdef SUPPORT_TLS
tls_advertised = FALSE;
- #endif
- #ifdef EXPERIMENTAL_DSN
+#endif
dsn_advertised = FALSE;
- #endif
+#ifdef EXPERIMENTAL_INTERNATIONAL
+ smtputf8_advertised = FALSE;
+#endif
smtp_code = US"250 "; /* Default response code plus space*/
if (user_msg == NULL)
s = string_cat(s, &size, &ptr, US"-8BITMIME\r\n", 11);
}
- #ifdef EXPERIMENTAL_DSN
/* Advertise DSN support if configured to do so. */
if (verify_check_host(&dsn_advertise_hosts) != FAIL)
{
s = string_cat(s, &size, &ptr, US"-DSN\r\n", 6);
dsn_advertised = TRUE;
}
- #endif
/* Advertise ETRN if there's an ACL checking whether a host is
permitted to issue it; a check is made when any host actually tries. */
letters, so output the names in upper case, though we actually recognize
them in either case in the AUTH command. */
- if (auths != NULL)
- {
- if (verify_check_host(&auth_advertise_hosts) == OK)
- {
- auth_instance *au;
- BOOL first = TRUE;
- for (au = auths; au != NULL; au = au->next)
- {
- if (au->server && (au->advertise_condition == NULL ||
- expand_check_condition(au->advertise_condition, au->name,
- US"authenticator")))
- {
- int saveptr;
- if (first)
- {
- s = string_cat(s, &size, &ptr, smtp_code, 3);
- s = string_cat(s, &size, &ptr, US"-AUTH", 5);
- first = FALSE;
- auth_advertised = TRUE;
- }
- saveptr = ptr;
- s = string_cat(s, &size, &ptr, US" ", 1);
- s = string_cat(s, &size, &ptr, au->public_name,
- Ustrlen(au->public_name));
- while (++saveptr < ptr) s[saveptr] = toupper(s[saveptr]);
- au->advertised = TRUE;
- }
- else au->advertised = FALSE;
- }
- if (!first) s = string_cat(s, &size, &ptr, US"\r\n", 2);
- }
- }
+ if ( auths
+#if defined(SUPPORT_TLS) && defined(AUTH_TLS)
+ && !sender_host_authenticated
+#endif
+ && verify_check_host(&auth_advertise_hosts) == OK
+ )
+ {
+ auth_instance *au;
+ BOOL first = TRUE;
+ for (au = auths; au; au = au->next)
+ if (au->server && (au->advertise_condition == NULL ||
+ expand_check_condition(au->advertise_condition, au->name,
+ US"authenticator")))
+ {
+ int saveptr;
+ if (first)
+ {
+ s = string_cat(s, &size, &ptr, smtp_code, 3);
+ s = string_cat(s, &size, &ptr, US"-AUTH", 5);
+ first = FALSE;
+ auth_advertised = TRUE;
+ }
+ saveptr = ptr;
+ s = string_cat(s, &size, &ptr, US" ", 1);
+ s = string_cat(s, &size, &ptr, au->public_name,
+ Ustrlen(au->public_name));
+ while (++saveptr < ptr) s[saveptr] = toupper(s[saveptr]);
+ au->advertised = TRUE;
+ }
+ else
+ au->advertised = FALSE;
+
+ if (!first) s = string_cat(s, &size, &ptr, US"\r\n", 2);
+ }
/* Advertise TLS (Transport Level Security) aka SSL (Secure Socket Layer)
if it has been included in the binary, and the host matches
tls_advertise_hosts. We must *not* advertise if we are already in a
secure connection. */
- #ifdef SUPPORT_TLS
+#ifdef SUPPORT_TLS
if (tls_in.active < 0 &&
verify_check_host(&tls_advertise_hosts) != FAIL)
{
s = string_cat(s, &size, &ptr, US"-STARTTLS\r\n", 11);
tls_advertised = TRUE;
}
- #endif
+#endif
- #ifndef DISABLE_PRDR
+#ifndef DISABLE_PRDR
/* Per Recipient Data Response, draft by Eric A. Hall extending RFC */
if (prdr_enable)
{
s = string_cat(s, &size, &ptr, smtp_code, 3);
s = string_cat(s, &size, &ptr, US"-PRDR\r\n", 7);
}
- #endif
+#endif
+
+#ifdef EXPERIMENTAL_INTERNATIONAL
+ if ( accept_8bitmime
+ && verify_check_host(&smtputf8_advertise_hosts) != FAIL)
+ {
+ s = string_cat(s, &size, &ptr, smtp_code, 3);
+ s = string_cat(s, &size, &ptr, US"-SMTPUTF8\r\n", 11);
+ smtputf8_advertised = TRUE;
+ }
+#endif
/* Finish off the multiline reply with one that is always available. */
s[ptr] = 0;
- #ifdef SUPPORT_TLS
+#ifdef SUPPORT_TLS
if (tls_in.active >= 0) (void)tls_write(TRUE, s, ptr); else
- #endif
+#endif
{
int i = fwrite(s, 1, ptr, smtp_out); i = i; /* compiler quietening */
helo_seen = TRUE;
/* Reset the protocol and the state, abandoning any previous message. */
-
- received_protocol = (esmtp?
- protocols[pextend +
- ((sender_host_authenticated != NULL)? pauthed : 0) +
- ((tls_in.active >= 0)? pcrpted : 0)]
- :
- protocols[pnormal + ((tls_in.active >= 0)? pcrpted : 0)])
- +
- ((sender_host_address != NULL)? pnlocal : 0);
-
+ received_protocol =
+ (sender_host_address ? protocols : protocols_local)
+ [ (esmtp
+ ? pextend + (sender_host_authenticated ? pauthed : 0)
+ : pnormal)
+ + (tls_in.active >= 0 ? pcrpted : 0)
+ ];
smtp_reset(reset_point);
toomany = FALSE;
break; /* HELO/EHLO */
if (!extract_option(&name, &value)) break;
for (mail_args = env_mail_type_list;
- (char *)mail_args < (char *)env_mail_type_list + sizeof(env_mail_type_list);
+ mail_args->value != ENV_MAIL_OPT_NULL;
mail_args++
)
- {
if (strcmpic(name, mail_args->name) == 0)
break;
- }
if (mail_args->need_value && strcmpic(value, US"") == 0)
break;
and "7BIT" as body types, but take no action. */
case ENV_MAIL_OPT_BODY:
if (accept_8bitmime) {
- if (strcmpic(value, US"8BITMIME") == 0) {
+ if (strcmpic(value, US"8BITMIME") == 0)
body_8bitmime = 8;
- } else if (strcmpic(value, US"7BIT") == 0) {
+ else if (strcmpic(value, US"7BIT") == 0)
body_8bitmime = 7;
- } else {
+ else
+ {
body_8bitmime = 0;
done = synprot_error(L_smtp_syntax_error, 501, NULL,
US"invalid data for BODY");
goto COMMAND_LOOP;
- }
+ }
DEBUG(D_receive) debug_printf("8BITMIME: %d\n", body_8bitmime);
break;
}
arg_error = TRUE;
break;
- #ifdef EXPERIMENTAL_DSN
-
/* Handle the two DSN options, but only if configured to do so (which
will have caused "DSN" to be given in the EHLO response). The code itself
is included only if configured in at build time. */
case ENV_MAIL_OPT_RET:
- if (dsn_advertised) {
+ if (dsn_advertised)
+ {
/* Check if RET has already been set */
- if (dsn_ret > 0) {
+ if (dsn_ret > 0)
+ {
synprot_error(L_smtp_syntax_error, 501, NULL,
US"RET can be specified once only");
goto COMMAND_LOOP;
- }
- dsn_ret = (strcmpic(value, US"HDRS") == 0)? dsn_ret_hdrs :
- (strcmpic(value, US"FULL") == 0)? dsn_ret_full : 0;
+ }
+ dsn_ret = strcmpic(value, US"HDRS") == 0
+ ? dsn_ret_hdrs
+ : strcmpic(value, US"FULL") == 0
+ ? dsn_ret_full
+ : 0;
DEBUG(D_receive) debug_printf("DSN_RET: %d\n", dsn_ret);
/* Check for invalid invalid value, and exit with error */
- if (dsn_ret == 0) {
+ if (dsn_ret == 0)
+ {
synprot_error(L_smtp_syntax_error, 501, NULL,
US"Value for RET is invalid");
goto COMMAND_LOOP;
- }
- }
+ }
+ }
break;
case ENV_MAIL_OPT_ENVID:
- if (dsn_advertised) {
+ if (dsn_advertised)
+ {
/* Check if the dsn envid has been already set */
- if (dsn_envid != NULL) {
+ if (dsn_envid != NULL)
+ {
synprot_error(L_smtp_syntax_error, 501, NULL,
US"ENVID can be specified once only");
goto COMMAND_LOOP;
- }
+ }
dsn_envid = string_copy(value);
DEBUG(D_receive) debug_printf("DSN_ENVID: %s\n", dsn_envid);
- }
+ }
break;
- #endif
/* Handle the AUTH extension. If the value given is not "<>" and either
the ACL says "yes" or there is no ACL but the sending host is
switch (rc)
{
case OK:
- if (authenticated_by == NULL ||
- authenticated_by->mail_auth_condition == NULL ||
- expand_check_condition(authenticated_by->mail_auth_condition,
- authenticated_by->name, US"authenticator"))
- break; /* Accept the AUTH */
-
- ignore_msg = US"server_mail_auth_condition failed";
- if (authenticated_id != NULL)
- ignore_msg = string_sprintf("%s: authenticated ID=\"%s\"",
- ignore_msg, authenticated_id);
+ if (authenticated_by == NULL ||
+ authenticated_by->mail_auth_condition == NULL ||
+ expand_check_condition(authenticated_by->mail_auth_condition,
+ authenticated_by->name, US"authenticator"))
+ break; /* Accept the AUTH */
+
+ ignore_msg = US"server_mail_auth_condition failed";
+ if (authenticated_id != NULL)
+ ignore_msg = string_sprintf("%s: authenticated ID=\"%s\"",
+ ignore_msg, authenticated_id);
/* Fall through */
case FAIL:
- authenticated_sender = NULL;
- log_write(0, LOG_MAIN, "ignoring AUTH=%s from %s (%s)",
- value, host_and_ident(TRUE), ignore_msg);
- break;
+ authenticated_sender = NULL;
+ log_write(0, LOG_MAIN, "ignoring AUTH=%s from %s (%s)",
+ value, host_and_ident(TRUE), ignore_msg);
+ break;
/* Should only get DEFER or ERROR here. Put back terminator
overrides for error message */
default:
- value[-1] = '=';
- name[-1] = ' ';
- (void)smtp_handle_acl_fail(ACL_WHERE_MAILAUTH, rc, user_msg,
- log_msg);
- goto COMMAND_LOOP;
+ value[-1] = '=';
+ name[-1] = ' ';
+ (void)smtp_handle_acl_fail(ACL_WHERE_MAILAUTH, rc, user_msg,
+ log_msg);
+ goto COMMAND_LOOP;
}
}
break;
break;
#endif
- /* Unknown option. Stick back the terminator characters and break
+#ifdef EXPERIMENTAL_INTERNATIONAL
+ case ENV_MAIL_OPT_UTF8:
+ if (smtputf8_advertised)
+ {
+ DEBUG(D_receive) debug_printf("smtputf8 requested\n");
+ message_smtputf8 = allow_utf8_domains = TRUE;
+ received_protocol = string_sprintf("utf8%s", received_protocol);
+ }
+ break;
+#endif
+ /* No valid option. Stick back the terminator characters and break
the loop. Do the name-terminator second as extract_option sets
- value==name when it found no equal-sign.
- An error for a malformed address will occur. */
- default:
+ value==name when it found no equal-sign.
+ An error for a malformed address will occur. */
+ case ENV_MAIL_OPT_NULL:
value[-1] = '=';
name[-1] = ' ';
arg_error = TRUE;
break;
+
+ default: assert(0);
}
/* Break out of for loop if switch() had bad argument or
when start of the email address is reached */
/* Now extract the address, first applying any SMTP-time rewriting. The
TRUE flag allows "<>" as a sender address. */
- raw_sender = ((rewrite_existflags & rewrite_smtp) != 0)?
- rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
- global_rewrite_rules) : smtp_cmd_data;
+ raw_sender = rewrite_existflags & rewrite_smtp
+ ? rewrite_one(smtp_cmd_data, rewrite_smtp, NULL, FALSE, US"",
+ global_rewrite_rules)
+ : smtp_cmd_data;
/* rfc821_domains = TRUE; << no longer needed */
raw_sender =
rcpt_fail_count++;
break;
}
-
- #ifdef EXPERIMENTAL_DSN
+
/* Set the DSN flags orcpt and dsn_flags from the session*/
orcpt = NULL;
flags = 0;
if (esmtp) for(;;)
{
- uschar *name, *value, *end;
- int size;
+ uschar *name, *value;
if (!extract_option(&name, &value))
- {
break;
- }
if (dsn_advertised && strcmpic(name, US"ORCPT") == 0)
{
/* Check whether orcpt has been already set */
- if (orcpt != NULL) {
+ if (orcpt)
+ {
synprot_error(L_smtp_syntax_error, 501, NULL,
US"ORCPT can be specified once only");
goto COMMAND_LOOP;
else if (dsn_advertised && strcmpic(name, US"NOTIFY") == 0)
{
/* Check if the notify flags have been already set */
- if (flags > 0) {
+ if (flags > 0)
+ {
synprot_error(L_smtp_syntax_error, 501, NULL,
US"NOTIFY can be specified once only");
goto COMMAND_LOOP;
}
- if (strcmpic(value, US"NEVER") == 0) flags |= rf_notify_never; else
+ if (strcmpic(value, US"NEVER") == 0)
+ flags |= rf_notify_never;
+ else
{
uschar *p = value;
while (*p != 0)
{
uschar *pp = p;
while (*pp != 0 && *pp != ',') pp++;
- if (*pp == ',') *pp++ = 0;
- if (strcmpic(p, US"SUCCESS") == 0) {
- DEBUG(D_receive) debug_printf("DSN: Setting notify success\n");
- flags |= rf_notify_success;
+ if (*pp == ',') *pp++ = 0;
+ if (strcmpic(p, US"SUCCESS") == 0)
+ {
+ DEBUG(D_receive) debug_printf("DSN: Setting notify success\n");
+ flags |= rf_notify_success;
}
- else if (strcmpic(p, US"FAILURE") == 0) {
- DEBUG(D_receive) debug_printf("DSN: Setting notify failure\n");
- flags |= rf_notify_failure;
+ else if (strcmpic(p, US"FAILURE") == 0)
+ {
+ DEBUG(D_receive) debug_printf("DSN: Setting notify failure\n");
+ flags |= rf_notify_failure;
}
- else if (strcmpic(p, US"DELAY") == 0) {
- DEBUG(D_receive) debug_printf("DSN: Setting notify delay\n");
- flags |= rf_notify_delay;
+ else if (strcmpic(p, US"DELAY") == 0)
+ {
+ DEBUG(D_receive) debug_printf("DSN: Setting notify delay\n");
+ flags |= rf_notify_delay;
}
- else {
+ else
+ {
/* Catch any strange values */
synprot_error(L_smtp_syntax_error, 501, NULL,
US"Invalid value for NOTIFY parameter");
break;
}
}
- #endif
/* Apply SMTP rewriting then extract the working address. Don't allow "<>"
as a recipient address */
if (user_msg == NULL) smtp_printf("250 Accepted\r\n");
else smtp_user_msg(US"250", user_msg);
receive_add_recipient(recipient, -1);
-
- #ifdef EXPERIMENTAL_DSN
+
/* Set the dsn flags in the recipients_list */
- if (orcpt != NULL)
- recipients_list[recipients_count-1].orcpt = orcpt;
- else
- recipients_list[recipients_count-1].orcpt = NULL;
+ recipients_list[recipients_count-1].orcpt = orcpt;
+ recipients_list[recipients_count-1].dsn_flags = flags;
- if (flags != 0)
- recipients_list[recipients_count-1].dsn_flags = flags;
- else
- recipients_list[recipients_count-1].dsn_flags = 0;
- DEBUG(D_receive) debug_printf("DSN: orcpt: %s flags: %d\n", recipients_list[recipients_count-1].orcpt, recipients_list[recipients_count-1].dsn_flags);
- #endif
-
+ DEBUG(D_receive) debug_printf("DSN: orcpt: %s flags: %d\n",
+ recipients_list[recipients_count-1].orcpt,
+ recipients_list[recipients_count-1].dsn_flags);
}
/* The recipient was discarded */
else smtp_user_msg(US"250", user_msg);
rcpt_fail_count++;
discarded = TRUE;
- log_write(0, LOG_MAIN|LOG_REJECT, "%s F=<%s> rejected RCPT %s: "
+ log_write(0, LOG_MAIN|LOG_REJECT, "%s F=<%s> RCPT %s: "
"discarded by %s ACL%s%s", host_and_ident(TRUE),
- (sender_address_unrewritten != NULL)?
- sender_address_unrewritten : sender_address,
+ sender_address_unrewritten? sender_address_unrewritten : sender_address,
smtp_cmd_argument, recipients_discarded? "MAIL" : "RCPT",
- (log_msg == NULL)? US"" : US": ",
- (log_msg == NULL)? US"" : log_msg);
+ log_msg ? US": " : US"", log_msg ? log_msg : US"");
}
/* Either the ACL failed the address, or it was deferred. */
ACL may have delayed. To handle cutthrough delivery enforce a dummy call
to get the DATA command sent. */
- if (acl_smtp_predata == NULL && cutthrough_fd < 0) rc = OK; else
+ if (acl_smtp_predata == NULL && cutthrough.fd < 0) rc = OK; else
{
uschar * acl= acl_smtp_predata ? acl_smtp_predata : US"accept";
enable_dollar_recipients = TRUE;
helo_seen = esmtp = auth_advertised = pipelining_advertised = FALSE;
cmd_list[CMD_LIST_EHLO].is_mail_cmd = TRUE;
cmd_list[CMD_LIST_AUTH].is_mail_cmd = TRUE;
+ cmd_list[CMD_LIST_TLS_AUTH].is_mail_cmd = TRUE;
if (sender_helo_name != NULL)
{
store_free(sender_helo_name);
set_process_info("handling incoming TLS connection from %s",
host_and_ident(FALSE));
}
- received_protocol = (esmtp?
- protocols[pextend + pcrpted +
- ((sender_host_authenticated != NULL)? pauthed : 0)]
- :
- protocols[pnormal + pcrpted])
- +
- ((sender_host_address != NULL)? pnlocal : 0);
+ received_protocol =
+ (sender_host_address ? protocols : protocols_local)
+ [ (esmtp
+ ? pextend + (sender_host_authenticated ? pauthed : 0)
+ : pnormal)
+ + (tls_in.active >= 0 ? pcrpted : 0)
+ ];
sender_host_authenticated = NULL;
authenticated_id = NULL;
break;
}
etrn_command = US"exim -R";
- argv = child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE, 2, US"-R",
+ argv = CUSS child_exec_exim(CEE_RETURN_ARGV, TRUE, NULL, TRUE, 2, US"-R",
smtp_cmd_data);
}
/* If ETRN queue runs are to be serialized, check the database to
ensure one isn't already running. */
- if (smtp_etrn_serialize && !enq_start(etrn_serialize_key))
+ if (smtp_etrn_serialize && !enq_start(etrn_serialize_key, 1))
{
smtp_printf("458 Already processing %s\r\n", smtp_cmd_data);
break;
done = 2;
log_write(0, LOG_MAIN|LOG_REJECT, "SMTP call from %s dropped: too many "
"unrecognized commands (last was \"%s\")", host_and_ident(FALSE),
- smtp_cmd_buffer);
+ string_printing(smtp_cmd_buffer));
}
else
done = synprot_error(L_smtp_syntax_error, 500, NULL,
git://git.exim.org / exim.git / blobdiff