Lookups: lazy-load modules

[exim.git] / test / stderr / 0038

diff --git a/test/stderr/0038 b/test/stderr/0038
index 727c1c6c3bbcde8a3620c3f3b3a715d40779f8b3..f6b3ea23bda1c97ca21d3036575e99ecdbc2c470 100644 (file)
--- a/test/stderr/0038
+++ b/test/stderr/0038
@@ -6,10 +6,20 @@
 >>> host in helo_verify_hosts? no (option unset)
 >>> host in helo_try_verify_hosts? no (option unset)
 >>> host in helo_accept_junk_hosts? no (option unset)
 >>> host in helo_verify_hosts? no (option unset)
 >>> host in helo_try_verify_hosts? no (option unset)
 >>> host in helo_accept_junk_hosts? no (option unset)

+>>> test.ex in helo_lookup_domains?
+>>>  list element: @
+>>>  list element: @[]

 >>> test.ex in helo_lookup_domains? no (end of list)
 >>> test.ex in helo_lookup_domains? no (end of list)

->>> host in pipelining_advertise_hosts? yes (matched "*")
+>>>  list element: *
+>>>  host in limits_advertise_hosts? yes (matched "*")
+>>> host in dsn_advertise_hosts? no (option unset)
+>>> host in pipelining_advertise_hosts?
+>>>  list element: *
+>>>  host in pipelining_advertise_hosts? yes (matched "*")
+>>> host in chunking_advertise_hosts?
+>>> host in chunking_advertise_hosts? no (end of list)

 >>> using ACL "check_rcpt"
 >>> using ACL "check_rcpt"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 23)

 >>> check ratelimit = 0/1h/strict
 >>> ratelimit condition count=1 0.0/1h/per_mail/V4NET.9.8.7
 >>> ratelimit creating new rate data block
 >>> check ratelimit = 0/1h/strict
 >>> ratelimit condition count=1 0.0/1h/per_mail/V4NET.9.8.7
 >>> ratelimit creating new rate data block


@@ -19,20 +29,22 @@
 >>> l_message: RCPT: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_rcpt"
 LOG: H=(test.ex) [V4NET.9.8.7] Warning: RCPT: sender_rate=1.0 sender_rate_limit=0 sender_rate_period=1h
 >>> l_message: RCPT: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_rcpt"
 LOG: H=(test.ex) [V4NET.9.8.7] Warning: RCPT: sender_rate=1.0 sender_rate_limit=0 sender_rate_period=1h

->>> processing "accept"
+>>> processing "accept" (TESTSUITE/test-config 28)

 >>> accept: condition test succeeded in ACL "check_rcpt"
 >>> accept: condition test succeeded in ACL "check_rcpt"

+>>> end of ACL "check_rcpt": ACCEPT

 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"
 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 46)

 >>> check ratelimit = 0/1h/per_byte/strict
 >>> ratelimit condition count=19 0.0/1h/per_mail/V4NET.9.8.7
 >>> ratelimit found pre-computed rate 1.0
 >>> l_message: DATA: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_data"
 >>> check ratelimit = 0/1h/per_byte/strict
 >>> ratelimit condition count=19 0.0/1h/per_mail/V4NET.9.8.7
 >>> ratelimit found pre-computed rate 1.0
 >>> l_message: DATA: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_data"

-LOG: 10HmaX-0005vi-00 H=(test.ex) [V4NET.9.8.7] Warning: DATA: sender_rate=1.0 sender_rate_limit=0 sender_rate_period=1h
->>> processing "deny"
+LOG: 10HmaX-000000005vi-0000 H=(test.ex) [V4NET.9.8.7] Warning: DATA: sender_rate=1.0 sender_rate_limit=0 sender_rate_period=1h
+>>> processing "deny" (TESTSUITE/test-config 51)

 >>> deny: condition test succeeded in ACL "check_data"
 >>> deny: condition test succeeded in ACL "check_data"

-LOG: 10HmaX-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
+>>> end of ACL "check_data": DENY
+LOG: 10HmaX-000000005vi-0000 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA

 >>> host in hosts_connection_nolog? no (option unset)
 >>> host in host_lookup? no (option unset)
 >>> host in host_reject_connection? no (option unset)
 >>> host in hosts_connection_nolog? no (option unset)
 >>> host in host_lookup? no (option unset)
 >>> host in host_reject_connection? no (option unset)


@@ -41,10 +53,20 @@ LOG: 10HmaX-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
 >>> host in helo_verify_hosts? no (option unset)
 >>> host in helo_try_verify_hosts? no (option unset)
 >>> host in helo_accept_junk_hosts? no (option unset)
 >>> host in helo_verify_hosts? no (option unset)
 >>> host in helo_try_verify_hosts? no (option unset)
 >>> host in helo_accept_junk_hosts? no (option unset)

+>>> test.ex in helo_lookup_domains?
+>>>  list element: @
+>>>  list element: @[]

 >>> test.ex in helo_lookup_domains? no (end of list)
 >>> test.ex in helo_lookup_domains? no (end of list)

->>> host in pipelining_advertise_hosts? yes (matched "*")
+>>>  list element: *
+>>>  host in limits_advertise_hosts? yes (matched "*")
+>>> host in dsn_advertise_hosts? no (option unset)
+>>> host in pipelining_advertise_hosts?
+>>>  list element: *
+>>>  host in pipelining_advertise_hosts? yes (matched "*")
+>>> host in chunking_advertise_hosts?
+>>> host in chunking_advertise_hosts? no (end of list)

 >>> using ACL "check_rcpt"
 >>> using ACL "check_rcpt"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 23)

 >>> check ratelimit = 0/1h/strict
 >>> ratelimit condition count=1 0.0/1h/per_mail/V4NET.9.8.7
 >>> ratelimit found key in database
 >>> check ratelimit = 0/1h/strict
 >>> ratelimit condition count=1 0.0/1h/per_mail/V4NET.9.8.7
 >>> ratelimit found key in database


@@ -53,20 +75,22 @@ LOG: 10HmaX-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
 >>> l_message: RCPT: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_rcpt"
 LOG: H=(test.ex) [V4NET.9.8.7] Warning: RCPT: sender_rate=2.0 sender_rate_limit=0 sender_rate_period=1h
 >>> l_message: RCPT: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_rcpt"
 LOG: H=(test.ex) [V4NET.9.8.7] Warning: RCPT: sender_rate=2.0 sender_rate_limit=0 sender_rate_period=1h

->>> processing "accept"
+>>> processing "accept" (TESTSUITE/test-config 28)

 >>> accept: condition test succeeded in ACL "check_rcpt"
 >>> accept: condition test succeeded in ACL "check_rcpt"

+>>> end of ACL "check_rcpt": ACCEPT

 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"
 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 46)

 >>> check ratelimit = 0/1h/per_byte/strict
 >>> ratelimit condition count=19 0.0/1h/per_mail/V4NET.9.8.7
 >>> ratelimit found pre-computed rate 2.0
 >>> l_message: DATA: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_data"
 >>> check ratelimit = 0/1h/per_byte/strict
 >>> ratelimit condition count=19 0.0/1h/per_mail/V4NET.9.8.7
 >>> ratelimit found pre-computed rate 2.0
 >>> l_message: DATA: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_data"

-LOG: 10HmaY-0005vi-00 H=(test.ex) [V4NET.9.8.7] Warning: DATA: sender_rate=2.0 sender_rate_limit=0 sender_rate_period=1h
->>> processing "deny"
+LOG: 10HmaY-000000005vi-0000 H=(test.ex) [V4NET.9.8.7] Warning: DATA: sender_rate=2.0 sender_rate_limit=0 sender_rate_period=1h
+>>> processing "deny" (TESTSUITE/test-config 51)

 >>> deny: condition test succeeded in ACL "check_data"
 >>> deny: condition test succeeded in ACL "check_data"

-LOG: 10HmaY-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
+>>> end of ACL "check_data": DENY
+LOG: 10HmaY-000000005vi-0000 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA

 >>> host in hosts_connection_nolog? no (option unset)
 >>> host in host_lookup? no (option unset)
 >>> host in host_reject_connection? no (option unset)
 >>> host in hosts_connection_nolog? no (option unset)
 >>> host in host_lookup? no (option unset)
 >>> host in host_reject_connection? no (option unset)


@@ -75,10 +99,20 @@ LOG: 10HmaY-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
 >>> host in helo_verify_hosts? no (option unset)
 >>> host in helo_try_verify_hosts? no (option unset)
 >>> host in helo_accept_junk_hosts? no (option unset)
 >>> host in helo_verify_hosts? no (option unset)
 >>> host in helo_try_verify_hosts? no (option unset)
 >>> host in helo_accept_junk_hosts? no (option unset)

+>>> test.ex in helo_lookup_domains?
+>>>  list element: @
+>>>  list element: @[]

 >>> test.ex in helo_lookup_domains? no (end of list)
 >>> test.ex in helo_lookup_domains? no (end of list)

->>> host in pipelining_advertise_hosts? yes (matched "*")
+>>>  list element: *
+>>>  host in limits_advertise_hosts? yes (matched "*")
+>>> host in dsn_advertise_hosts? no (option unset)
+>>> host in pipelining_advertise_hosts?
+>>>  list element: *
+>>>  host in pipelining_advertise_hosts? yes (matched "*")
+>>> host in chunking_advertise_hosts?
+>>> host in chunking_advertise_hosts? no (end of list)

 >>> using ACL "check_rcpt"
 >>> using ACL "check_rcpt"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 23)

 >>> check ratelimit = 0/1h/per_conn/strict
 >>> ratelimit condition count=1 0.0/1h/per_conn/V4NET.9.8.7
 >>> ratelimit creating new rate data block
 >>> check ratelimit = 0/1h/per_conn/strict
 >>> ratelimit condition count=1 0.0/1h/per_conn/V4NET.9.8.7
 >>> ratelimit creating new rate data block


@@ -88,20 +122,22 @@ LOG: 10HmaY-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
 >>> l_message: RCPT: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_rcpt"
 LOG: H=(test.ex) [V4NET.9.8.7] Warning: RCPT: sender_rate=1.0 sender_rate_limit=0 sender_rate_period=1h
 >>> l_message: RCPT: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_rcpt"
 LOG: H=(test.ex) [V4NET.9.8.7] Warning: RCPT: sender_rate=1.0 sender_rate_limit=0 sender_rate_period=1h

->>> processing "accept"
+>>> processing "accept" (TESTSUITE/test-config 28)

 >>> accept: condition test succeeded in ACL "check_rcpt"
 >>> accept: condition test succeeded in ACL "check_rcpt"

+>>> end of ACL "check_rcpt": ACCEPT

 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"
 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 46)

 >>> check ratelimit = 0/1h/per_conn/strict
 >>> ratelimit condition count=1 0.0/1h/per_conn/V4NET.9.8.7
 >>> ratelimit found pre-computed rate 1.0
 >>> l_message: DATA: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_data"
 >>> check ratelimit = 0/1h/per_conn/strict
 >>> ratelimit condition count=1 0.0/1h/per_conn/V4NET.9.8.7
 >>> ratelimit found pre-computed rate 1.0
 >>> l_message: DATA: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_data"

-LOG: 10HmaZ-0005vi-00 H=(test.ex) [V4NET.9.8.7] Warning: DATA: sender_rate=1.0 sender_rate_limit=0 sender_rate_period=1h
->>> processing "deny"
+LOG: 10HmaZ-000000005vi-0000 H=(test.ex) [V4NET.9.8.7] Warning: DATA: sender_rate=1.0 sender_rate_limit=0 sender_rate_period=1h
+>>> processing "deny" (TESTSUITE/test-config 51)

 >>> deny: condition test succeeded in ACL "check_data"
 >>> deny: condition test succeeded in ACL "check_data"

-LOG: 10HmaZ-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
+>>> end of ACL "check_data": DENY
+LOG: 10HmaZ-000000005vi-0000 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA

 >>> host in hosts_connection_nolog? no (option unset)
 >>> host in host_lookup? no (option unset)
 >>> host in host_reject_connection? no (option unset)
 >>> host in hosts_connection_nolog? no (option unset)
 >>> host in host_lookup? no (option unset)
 >>> host in host_reject_connection? no (option unset)


@@ -110,10 +146,20 @@ LOG: 10HmaZ-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
 >>> host in helo_verify_hosts? no (option unset)
 >>> host in helo_try_verify_hosts? no (option unset)
 >>> host in helo_accept_junk_hosts? no (option unset)
 >>> host in helo_verify_hosts? no (option unset)
 >>> host in helo_try_verify_hosts? no (option unset)
 >>> host in helo_accept_junk_hosts? no (option unset)

+>>> test.ex in helo_lookup_domains?
+>>>  list element: @
+>>>  list element: @[]

 >>> test.ex in helo_lookup_domains? no (end of list)
 >>> test.ex in helo_lookup_domains? no (end of list)

->>> host in pipelining_advertise_hosts? yes (matched "*")
+>>>  list element: *
+>>>  host in limits_advertise_hosts? yes (matched "*")
+>>> host in dsn_advertise_hosts? no (option unset)
+>>> host in pipelining_advertise_hosts?
+>>>  list element: *
+>>>  host in pipelining_advertise_hosts? yes (matched "*")
+>>> host in chunking_advertise_hosts?
+>>> host in chunking_advertise_hosts? no (end of list)

 >>> using ACL "check_rcpt"
 >>> using ACL "check_rcpt"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 23)

 >>> check ratelimit = 0/1h/per_conn/strict
 >>> ratelimit condition count=1 0.0/1h/per_conn/V4NET.9.8.7
 >>> ratelimit found key in database
 >>> check ratelimit = 0/1h/per_conn/strict
 >>> ratelimit condition count=1 0.0/1h/per_conn/V4NET.9.8.7
 >>> ratelimit found key in database


@@ -122,20 +168,22 @@ LOG: 10HmaZ-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
 >>> l_message: RCPT: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_rcpt"
 LOG: H=(test.ex) [V4NET.9.8.7] Warning: RCPT: sender_rate=2.0 sender_rate_limit=0 sender_rate_period=1h
 >>> l_message: RCPT: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_rcpt"
 LOG: H=(test.ex) [V4NET.9.8.7] Warning: RCPT: sender_rate=2.0 sender_rate_limit=0 sender_rate_period=1h

->>> processing "accept"
+>>> processing "accept" (TESTSUITE/test-config 28)

 >>> accept: condition test succeeded in ACL "check_rcpt"
 >>> accept: condition test succeeded in ACL "check_rcpt"

+>>> end of ACL "check_rcpt": ACCEPT

 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"
 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 46)

 >>> check ratelimit = 0/1h/per_conn/strict
 >>> ratelimit condition count=1 0.0/1h/per_conn/V4NET.9.8.7
 >>> ratelimit found pre-computed rate 2.0
 >>> l_message: DATA: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_data"
 >>> check ratelimit = 0/1h/per_conn/strict
 >>> ratelimit condition count=1 0.0/1h/per_conn/V4NET.9.8.7
 >>> ratelimit found pre-computed rate 2.0
 >>> l_message: DATA: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_data"

-LOG: 10HmbA-0005vi-00 H=(test.ex) [V4NET.9.8.7] Warning: DATA: sender_rate=2.0 sender_rate_limit=0 sender_rate_period=1h
->>> processing "deny"
+LOG: 10HmbA-000000005vi-0000 H=(test.ex) [V4NET.9.8.7] Warning: DATA: sender_rate=2.0 sender_rate_limit=0 sender_rate_period=1h
+>>> processing "deny" (TESTSUITE/test-config 51)

 >>> deny: condition test succeeded in ACL "check_data"
 >>> deny: condition test succeeded in ACL "check_data"

-LOG: 10HmbA-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
+>>> end of ACL "check_data": DENY
+LOG: 10HmbA-000000005vi-0000 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA

 >>> host in hosts_connection_nolog? no (option unset)
 >>> host in host_lookup? no (option unset)
 >>> host in host_reject_connection? no (option unset)
 >>> host in hosts_connection_nolog? no (option unset)
 >>> host in host_lookup? no (option unset)
 >>> host in host_reject_connection? no (option unset)


@@ -144,10 +192,20 @@ LOG: 10HmbA-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
 >>> host in helo_verify_hosts? no (option unset)
 >>> host in helo_try_verify_hosts? no (option unset)
 >>> host in helo_accept_junk_hosts? no (option unset)
 >>> host in helo_verify_hosts? no (option unset)
 >>> host in helo_try_verify_hosts? no (option unset)
 >>> host in helo_accept_junk_hosts? no (option unset)

+>>> test.ex in helo_lookup_domains?
+>>>  list element: @
+>>>  list element: @[]

 >>> test.ex in helo_lookup_domains? no (end of list)
 >>> test.ex in helo_lookup_domains? no (end of list)

->>> host in pipelining_advertise_hosts? yes (matched "*")
+>>>  list element: *
+>>>  host in limits_advertise_hosts? yes (matched "*")
+>>> host in dsn_advertise_hosts? no (option unset)
+>>> host in pipelining_advertise_hosts?
+>>>  list element: *
+>>>  host in pipelining_advertise_hosts? yes (matched "*")
+>>> host in chunking_advertise_hosts?
+>>> host in chunking_advertise_hosts? no (end of list)

 >>> using ACL "check_rcpt"
 >>> using ACL "check_rcpt"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 23)

 >>> check ratelimit = 0/1h/per_rcpt
 >>> ratelimit condition count=1 0.0/1h/per_rcpt/V4NET.9.8.7
 >>> ratelimit creating new rate data block
 >>> check ratelimit = 0/1h/per_rcpt
 >>> ratelimit condition count=1 0.0/1h/per_rcpt/V4NET.9.8.7
 >>> ratelimit creating new rate data block


@@ -157,10 +215,11 @@ LOG: 10HmbA-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
 >>> l_message: RCPT: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_rcpt"
 LOG: H=(test.ex) [V4NET.9.8.7] Warning: RCPT: sender_rate=1.0 sender_rate_limit=0 sender_rate_period=1h
 >>> l_message: RCPT: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_rcpt"
 LOG: H=(test.ex) [V4NET.9.8.7] Warning: RCPT: sender_rate=1.0 sender_rate_limit=0 sender_rate_period=1h

->>> processing "accept"
+>>> processing "accept" (TESTSUITE/test-config 28)

 >>> accept: condition test succeeded in ACL "check_rcpt"
 >>> accept: condition test succeeded in ACL "check_rcpt"

+>>> end of ACL "check_rcpt": ACCEPT

 >>> using ACL "check_rcpt"
 >>> using ACL "check_rcpt"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 23)

 >>> check ratelimit = 0/1h/per_rcpt
 >>> ratelimit condition count=1 0.0/1h/per_rcpt/V4NET.9.8.7
 >>> ratelimit creating new rate data block
 >>> check ratelimit = 0/1h/per_rcpt
 >>> ratelimit condition count=1 0.0/1h/per_rcpt/V4NET.9.8.7
 >>> ratelimit creating new rate data block


@@ -169,10 +228,11 @@ LOG: H=(test.ex) [V4NET.9.8.7] Warning: RCPT: sender_rate=1.0 sender_rate_limit=
 >>> ratelimit computed rate 1.0
 >>> l_message: RCPT: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_rcpt"
 >>> ratelimit computed rate 1.0
 >>> l_message: RCPT: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_rcpt"

->>> processing "accept"
+>>> processing "accept" (TESTSUITE/test-config 28)

 >>> accept: condition test succeeded in ACL "check_rcpt"
 >>> accept: condition test succeeded in ACL "check_rcpt"

+>>> end of ACL "check_rcpt": ACCEPT

 >>> using ACL "check_rcpt"
 >>> using ACL "check_rcpt"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 23)

 >>> check ratelimit = 0/1h/per_rcpt
 >>> ratelimit condition count=1 0.0/1h/per_rcpt/V4NET.9.8.7
 >>> ratelimit creating new rate data block
 >>> check ratelimit = 0/1h/per_rcpt
 >>> ratelimit condition count=1 0.0/1h/per_rcpt/V4NET.9.8.7
 >>> ratelimit creating new rate data block


@@ -181,11 +241,12 @@ LOG: H=(test.ex) [V4NET.9.8.7] Warning: RCPT: sender_rate=1.0 sender_rate_limit=
 >>> ratelimit computed rate 1.0
 >>> l_message: RCPT: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_rcpt"
 >>> ratelimit computed rate 1.0
 >>> l_message: RCPT: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_rcpt"

->>> processing "accept"
+>>> processing "accept" (TESTSUITE/test-config 28)

 >>> accept: condition test succeeded in ACL "check_rcpt"
 >>> accept: condition test succeeded in ACL "check_rcpt"

+>>> end of ACL "check_rcpt": ACCEPT

 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"
 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 46)

 >>> check ratelimit = 0/1h/per_conn
 >>> ratelimit condition count=1 0.0/1h/per_conn/V4NET.9.8.7
 >>> ratelimit found key in database
 >>> check ratelimit = 0/1h/per_conn
 >>> ratelimit condition count=1 0.0/1h/per_conn/V4NET.9.8.7
 >>> ratelimit found key in database


@@ -193,10 +254,11 @@ LOG: H=(test.ex) [V4NET.9.8.7] Warning: RCPT: sender_rate=1.0 sender_rate_limit=
 >>> ratelimit computed rate 3.0
 >>> l_message: DATA: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_data"
 >>> ratelimit computed rate 3.0
 >>> l_message: DATA: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_data"

-LOG: 10HmbB-0005vi-00 H=(test.ex) [V4NET.9.8.7] Warning: DATA: sender_rate=3.0 sender_rate_limit=0 sender_rate_period=1h
->>> processing "deny"
+LOG: 10HmbB-000000005vi-0000 H=(test.ex) [V4NET.9.8.7] Warning: DATA: sender_rate=3.0 sender_rate_limit=0 sender_rate_period=1h
+>>> processing "deny" (TESTSUITE/test-config 51)

 >>> deny: condition test succeeded in ACL "check_data"
 >>> deny: condition test succeeded in ACL "check_data"

-LOG: 10HmbB-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
+>>> end of ACL "check_data": DENY
+LOG: 10HmbB-000000005vi-0000 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA

 >>> host in hosts_connection_nolog? no (option unset)
 >>> host in host_lookup? no (option unset)
 >>> host in host_reject_connection? no (option unset)
 >>> host in hosts_connection_nolog? no (option unset)
 >>> host in host_lookup? no (option unset)
 >>> host in host_reject_connection? no (option unset)


@@ -205,10 +267,20 @@ LOG: 10HmbB-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
 >>> host in helo_verify_hosts? no (option unset)
 >>> host in helo_try_verify_hosts? no (option unset)
 >>> host in helo_accept_junk_hosts? no (option unset)
 >>> host in helo_verify_hosts? no (option unset)
 >>> host in helo_try_verify_hosts? no (option unset)
 >>> host in helo_accept_junk_hosts? no (option unset)

+>>> test.ex in helo_lookup_domains?
+>>>  list element: @
+>>>  list element: @[]

 >>> test.ex in helo_lookup_domains? no (end of list)
 >>> test.ex in helo_lookup_domains? no (end of list)

->>> host in pipelining_advertise_hosts? yes (matched "*")
+>>>  list element: *
+>>>  host in limits_advertise_hosts? yes (matched "*")
+>>> host in dsn_advertise_hosts? no (option unset)
+>>> host in pipelining_advertise_hosts?
+>>>  list element: *
+>>>  host in pipelining_advertise_hosts? yes (matched "*")
+>>> host in chunking_advertise_hosts?
+>>> host in chunking_advertise_hosts? no (end of list)

 >>> using ACL "check_rcpt2"
 >>> using ACL "check_rcpt2"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 31)

 >>> check ratelimit = 1/1m/per_rcpt/noupdate
 >>> ratelimit condition count=0 1.0/1m/per_rcpt/V4NET.9.8.6
 >>> ratelimit creating new rate data block
 >>> check ratelimit = 1/1m/per_rcpt/noupdate
 >>> ratelimit condition count=0 1.0/1m/per_rcpt/V4NET.9.8.6
 >>> ratelimit creating new rate data block


@@ -216,15 +288,16 @@ LOG: 10HmbB-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
 >>> ratelimit db not updated: readonly mode
 >>> ratelimit computed rate 0.0
 >>> warn: condition test failed in ACL "check_rcpt2"
 >>> ratelimit db not updated: readonly mode
 >>> ratelimit computed rate 0.0
 >>> warn: condition test failed in ACL "check_rcpt2"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 37)

 >>> check ratelimit = 1/1m/per_rcpt
 >>> ratelimit condition count=1 1.0/1m/per_rcpt/V4NET.9.8.6
 >>> ratelimit found pre-computed rate 0.0
 >>> warn: condition test failed in ACL "check_rcpt2"
 >>> check ratelimit = 1/1m/per_rcpt
 >>> ratelimit condition count=1 1.0/1m/per_rcpt/V4NET.9.8.6
 >>> ratelimit found pre-computed rate 0.0
 >>> warn: condition test failed in ACL "check_rcpt2"

->>> processing "accept"
+>>> processing "accept" (TESTSUITE/test-config 43)

 >>> accept: condition test succeeded in ACL "check_rcpt2"
 >>> accept: condition test succeeded in ACL "check_rcpt2"

+>>> end of ACL "check_rcpt2": ACCEPT

 >>> using ACL "check_rcpt2"
 >>> using ACL "check_rcpt2"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 31)

 >>> check ratelimit = 1/1m/per_rcpt/noupdate
 >>> ratelimit condition count=0 1.0/1m/per_rcpt/V4NET.9.8.6
 >>> ratelimit creating new rate data block
 >>> check ratelimit = 1/1m/per_rcpt/noupdate
 >>> ratelimit condition count=0 1.0/1m/per_rcpt/V4NET.9.8.6
 >>> ratelimit creating new rate data block


@@ -232,16 +305,17 @@ LOG: 10HmbB-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
 >>> ratelimit db not updated: readonly mode
 >>> ratelimit computed rate 0.0
 >>> warn: condition test failed in ACL "check_rcpt2"
 >>> ratelimit db not updated: readonly mode
 >>> ratelimit computed rate 0.0
 >>> warn: condition test failed in ACL "check_rcpt2"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 37)

 >>> check ratelimit = 1/1m/per_rcpt
 >>> ratelimit condition count=1 1.0/1m/per_rcpt/V4NET.9.8.6
 >>> ratelimit found pre-computed rate 0.0
 >>> warn: condition test failed in ACL "check_rcpt2"
 >>> check ratelimit = 1/1m/per_rcpt
 >>> ratelimit condition count=1 1.0/1m/per_rcpt/V4NET.9.8.6
 >>> ratelimit found pre-computed rate 0.0
 >>> warn: condition test failed in ACL "check_rcpt2"

->>> processing "accept"
+>>> processing "accept" (TESTSUITE/test-config 43)

 >>> accept: condition test succeeded in ACL "check_rcpt2"
 >>> accept: condition test succeeded in ACL "check_rcpt2"

+>>> end of ACL "check_rcpt2": ACCEPT

 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"
 >>> host in ignore_fromline_hosts? no (option unset)
 >>> using ACL "check_data"

->>> processing "warn"
+>>> processing "warn" (TESTSUITE/test-config 46)

 >>> check ratelimit = 0/1h/per_byte/strict
 >>> ratelimit condition count=19 0.0/1h/per_mail/V4NET.9.8.6
 >>> ratelimit creating new rate data block
 >>> check ratelimit = 0/1h/per_byte/strict
 >>> ratelimit condition count=19 0.0/1h/per_mail/V4NET.9.8.6
 >>> ratelimit creating new rate data block


@@ -250,7 +324,8 @@ LOG: 10HmbB-0005vi-00 H=(test.ex) [V4NET.9.8.7] F=<> rejected after DATA
 >>> ratelimit computed rate 19.0
 >>> l_message: DATA: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_data"
 >>> ratelimit computed rate 19.0
 >>> l_message: DATA: sender_rate=$sender_rate sender_rate_limit=$sender_rate_limit sender_rate_period=$sender_rate_period
 >>> warn: condition test succeeded in ACL "check_data"

-LOG: 10HmbC-0005vi-00 H=(test.ex) [V4NET.9.8.6] Warning: DATA: sender_rate=19.0 sender_rate_limit=0 sender_rate_period=1h
->>> processing "deny"
+LOG: 10HmbC-000000005vi-0000 H=(test.ex) [V4NET.9.8.6] Warning: DATA: sender_rate=19.0 sender_rate_limit=0 sender_rate_period=1h
+>>> processing "deny" (TESTSUITE/test-config 51)

 >>> deny: condition test succeeded in ACL "check_data"
 >>> deny: condition test succeeded in ACL "check_data"

-LOG: 10HmbC-0005vi-00 H=(test.ex) [V4NET.9.8.6] F=<> rejected after DATA
+>>> end of ACL "check_data": DENY
+LOG: 10HmbC-000000005vi-0000 H=(test.ex) [V4NET.9.8.6] F=<> rejected after DATA