-/* $Cambridge: exim/src/src/daemon.c,v 1.19 2007/01/08 10:50:17 ph10 Exp $ */
-
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2007 */
+/* Copyright (c) University of Cambridge 1995 - 2009 */
/* See the file NOTICE for conditions of use and distribution. */
/* Functions concerned with running Exim as a daemon */
* Local static variables *
*************************************************/
-static volatile BOOL sigchld_seen;
-static volatile BOOL sighup_seen;
+static SIGNAL_BOOL sigchld_seen;
+static SIGNAL_BOOL sighup_seen;
static int accept_retry_count = 0;
static int accept_retry_errno;
if (smtp_load_reserve >= 0)
{
- load_average = os_getloadavg();
+ load_average = OS_GETLOADAVG();
if (smtp_reserve_hosts == NULL && load_average > smtp_load_reserve)
{
DEBUG(D_any) debug_printf("rejecting SMTP connection: load average = %.2f\n",
int old_pool = store_pool;
int save_debug_selector = debug_selector;
BOOL local_queue_only;
+ BOOL session_local_queue_only;
#ifdef SA_NOCLDWAIT
struct sigaction act;
#endif
+ smtp_accept_count++; /* So that it includes this process */
+
/* May have been modified for the subprocess */
log_write_selector = use_log_write_selector;
/* Initialize the queueing flags */
queue_check_only();
- local_queue_only = queue_only;
+ session_local_queue_only = queue_only;
/* Close the listening sockets, and set the SIGCHLD handler to SIG_IGN.
We also attempt to set things up so that children are automatically reaped,
for (i = 0; i < listen_socket_count; i++) (void)close(listen_sockets[i]);
+ /* Set FD_CLOEXEC on the SMTP socket. We don't want any rogue child processes
+ to be able to communicate with them, under any circumstances. */
+ (void)fcntl(accept_socket, F_SETFD,
+ fcntl(accept_socket, F_GETFD) | FD_CLOEXEC);
+ (void)fcntl(dup_accept_socket, F_SETFD,
+ fcntl(dup_accept_socket, F_GETFD) | FD_CLOEXEC);
+
#ifdef SA_NOCLDWAIT
act.sa_handler = SIG_IGN;
sigemptyset(&(act.sa_mask));
if (debug_daemon) debug_selector = 0;
/* If there are too many child processes for immediate delivery,
- set the local_queue_only flag, which is initialized from the
+ set the session_local_queue_only flag, which is initialized from the
configured value and may therefore already be TRUE. Leave logging
- till later so it will have a message id attached. */
+ till later so it will have a message id attached. Note that there is no
+ possibility of re-calculating this per-message, because the value of
+ smtp_accept_count does not change in this subprocess. */
- if (smtp_accept_queue > 0 && smtp_accept_count >= smtp_accept_queue)
+ if (smtp_accept_queue > 0 && smtp_accept_count > smtp_accept_queue)
{
- local_queue_only = TRUE;
+ session_local_queue_only = TRUE;
queue_only_reason = 1;
}
/* Handle the start of the SMTP session, then loop, accepting incoming
messages from the SMTP connection. The end will come at the QUIT command,
when smtp_setup_msg() returns 0. A break in the connection causes the
- process to die (see accept.c). */
+ process to die (see accept.c).
+
+ NOTE: We do *not* call smtp_log_no_mail() if smtp_start_session() fails,
+ because a log line has already been written for all its failure exists
+ (usually "connection refused: <reason>") and writing another one is
+ unnecessary clutter. */
if (!smtp_start_session())
{
if (!ok) /* Connection was dropped */
{
mac_smtp_fflush();
+ smtp_log_no_mail(); /* Log no mail if configured */
_exit(EXIT_SUCCESS);
}
if (message_id[0] == 0) continue; /* No message was accepted */
{
mac_smtp_fflush();
search_tidyup();
+ smtp_log_no_mail(); /* Log no mail if configured */
_exit((rc == 0)? EXIT_SUCCESS : EXIT_FAILURE);
}
store_reset(reset_point);
/* If queue_only is set or if there are too many incoming connections in
- existence, local_queue_only will be TRUE. If it is not, check whether we
- have received too many messages in this session for immediate delivery. If
- not, and queue_only_load is set, check that the load average is below it.
- Note that, once set, local_queue_only remains set for any subsequent
- messages on the same SMTP connection. This is a deliberate choice; even
- though the load average may fall, it doesn't seem right to deliver later
- messages on the same call when not delivering earlier ones. */
-
- if (!local_queue_only)
+ existence, session_local_queue_only will be TRUE. If it is not, check
+ whether we have received too many messages in this session for immediate
+ delivery. */
+
+ if (!session_local_queue_only &&
+ smtp_accept_queue_per_connection > 0 &&
+ receive_messagecount > smtp_accept_queue_per_connection)
{
- if (smtp_accept_queue_per_connection > 0 &&
- receive_messagecount > smtp_accept_queue_per_connection)
- {
- local_queue_only = TRUE;
- queue_only_reason = 2;
- }
- else if (queue_only_load >= 0)
+ session_local_queue_only = TRUE;
+ queue_only_reason = 2;
+ }
+
+ /* Initialize local_queue_only from session_local_queue_only. If it is not
+ true, and queue_only_load is set, check that the load average is below it.
+ If local_queue_only is set by this means, we also set if for the session if
+ queue_only_load_latch is true (the default). This means that, once set,
+ local_queue_only remains set for any subsequent messages on the same SMTP
+ connection. This is a deliberate choice; even though the load average may
+ fall, it doesn't seem right to deliver later messages on the same call when
+ not delivering earlier ones. However, the are special circumstances such as
+ very long-lived connections from scanning appliances where this is not the
+ best strategy. In such cases, queue_only_load_latch should be set false. */
+
+ local_queue_only = session_local_queue_only;
+ if (!local_queue_only && queue_only_load >= 0)
+ {
+ local_queue_only = (load_average = OS_GETLOADAVG()) > queue_only_load;
+ if (local_queue_only)
{
- local_queue_only = (load_average = os_getloadavg()) > queue_only_load;
- if (local_queue_only) queue_only_reason = 3;
+ queue_only_reason = 3;
+ if (queue_only_load_latch) session_local_queue_only = TRUE;
}
}
void
daemon_go(void)
{
+struct passwd *pw;
int *listen_sockets = NULL;
int listen_socket_count = 0;
ip_address_item *addresses = NULL;
exim_setugid(exim_uid, exim_gid, geteuid()==root_uid, US"running as a daemon");
+/* Update the originator_xxx fields so that received messages as listed as
+coming from Exim, not whoever started the daemon. */
+
+originator_uid = exim_uid;
+originator_gid = exim_gid;
+originator_login = ((pw = getpwuid(exim_uid)) != NULL)?
+ string_copy_malloc(US pw->pw_name) : US"exim";
+
/* Get somewhere to keep the list of queue-runner pids if we are keeping track
of them (and also if we are doing queue runs). */
struct sockaddr_in accepted;
#endif
- EXIM_SOCKLEN_T len = sizeof(accepted);
+ EXIM_SOCKLEN_T len;
pid_t pid;
/* This code is placed first in the loop, so that it gets obeyed at the
{
uschar opt[8];
uschar *p = opt;
- uschar *extra[4];
+ uschar *extra[5];
int extracount = 1;
signal(SIGALRM, SIG_DFL);
{
if (FD_ISSET(listen_sockets[sk], &select_listen))
{
+ len = sizeof(accepted);
accept_socket = accept(listen_sockets[sk],
(struct sockaddr *)&accepted, &len);
FD_CLR(listen_sockets[sk], &select_listen);
git://git.exim.org / exim.git / blobdiff