affect Exim's operation, with an unchanged configuration file. For new
options, and new features, see the NewStuff file next to this ChangeLog.
+Exim version 4.95
+-----------------
+
+JH/01 Move the wait-for-next-tick (needed for unique messmage IDs) from
+ after reception to before a subsequent reception. This should
+ mean slightly faster delivery, and also confirmation of reception
+ to senders.
+
+JH/02 Move from using the pcre library to pcre2. The former is no longer
+ being developed or supported (by the original developer).
+
+JH/03 Constification work in the filters module required a major version
+ bump for the local-scan API. Specifically, the "headers_charset"
+ global which is visible via the API is now const and may therefore
+ not be modified by local-scan code.
+
+JH/04 Fix ClamAV TCP use under FreeBSD. Previously the OS-specific shim for
+ sendfile() didi not account for the way the ClamAV driver code called it.
+
+JH/05 Bug 2819: speed up command-line messages being read in. Previously a
+ time check was being done for every character; replace that with one
+ per buffer.
+
+JH/06 Bug 2815: Fix ALPN sent by server under OpenSSL. Previously the string
+ sent was prefixed with a length byte.
+
Exim version 4.95
-----------------
JH/07 Bug 2597: Fix a resource leak. Using a lookup in obtaining a value for
smtp_accept_max_per_host allocated resources which were not released
when the limit was exceeded. This eventually crashed the daemon. Fix
- by adding a relase action in that path.
+ by adding a release action in that path.
JH/08 Bug 2598: Fix verify ACL condition. The options for the condition are
expanded; previously using tainted values was rejected. Fix by using
JH/16 Bug 2615: Fix pause during message reception, on systems that have been
suspended/resumed. The Linux CLOCK_MONOTONIC does not account for time
- spent suspended, ignoring the Posix definition. Previously we assumed
+ spent suspended, ignoring the POSIX definition. Previously we assumed
it did and a constant offset from real time could be used as a correction.
Change to using the same clock source for the start-of-message and the
post-message next-tick-wait. Also change to using CLOCK_BOOTTIME if it
JH/17 Bug 2295: Fix DKIM signing to always semicolon-terminate. Although the
RFC says it is optional some validators care. The missing char was not
- intended but triggered by a line-wrap alignement. Discovery and fix by
+ intended but triggered by a line-wrap alignment. Discovery and fix by
Guillaume Outters, hacked on by JH.
JH/18 Bug 2617: Fix a taint trap in parse_fix_phrase(). Previously when the
name being quoted was tainted a trap would be taken. Fix by using
- dynamicaly created buffers. The routine could have been called by a
+ dynamically created buffers. The routine could have been called by a
rewrite with the "h" flag, by using the "-F" command-line option, or
by using a "name=" option on a control=submission ACL modifier.
JH/30 Bug 2677: fix matching of long addresses. Since 4.93 a limit of 256 was
applied. This resulted, if any header-line rewrite rules were configured,
- in a panic-log trigerrable by sending a message with a long address in
- a header. Fix by increaing the arbitrary limit to larger than a single
+ in a panic-log triggerable by sending a message with a long address in
+ a header. Fix by increasing the arbitrary limit to larger than a single
(dewrapped) 5322 header line maximum size.
+JH/31 The ESMTP option name advertised for the SUPPORT_EARLY_PIPE build option
+ is changed from X_PIPE_CONNECT to PIPE_CONNECT. This is in line with
+ RFC 6648 which deprecates X- options in protocols as a general practice.
+ Changeover between the implementations is handled by the mechanisms
+ already coded.
+
+JH/32 Bug 2599: fix delay of delivery to a local address where there is also
+ a remote which uses callout/hold. Previously the local was queued.
+
+JH/33 Fix a taint trap in the ${listextract } expansion when the source data
+ was tainted.
+
+JH/34 Fix the placement of a multiple-message delivery marker in the delivery
+ log line. The asterisk is now consistently appended to the remote IP
+ (and port, if given), and will also be provided on defer and fail log
+ lines. Previously it could be placed on the local IP if that was being
+ logged, and was only provided on delivery lines.
+
+JH/35 Bug 2343: Harden exim_tidydb against corrupt wait- files.
+
+JH/36 Bug 2687: Fix interpretation of multiple ^ chars in a plaintext
+ authenticator client_send option. Previously the next char, after a pair
+ was collapsed, was taken verbatim (so ^^^foo became ^^foo; ^^^^foo became
+ ^^\x00foo). Fixed to get ^\x00foo and ^^foo respectively to match the
+ documentation. There is still no way to get a leading ^ immediately
+ after a NUL (ie. for the password of a PLAIN method authenticator.
+
+JH/37 Enforce the expected size, for fixed-size records read from hints-DB
+ files. For bad sizes read, delete the record and whine to paniclog.
+
+JH/38 When logging an AUTH failure, as server, do not include sensitive
+ information. Previously, the credentials would be included if given
+ as part of the AUTH command line and an ACL denied authentication.
+
+JH/39 Bug 2691: fix $local_part_data. When the matching list element
+ referred to a file, bad data was returned. This likely also affected
+ $domain_part_data.
+
+JH/40 The gsasl authenticator now supports caching of the salted password
+ generated by the client-side implementation. This required the addition
+ of a new variable: $auth4.
+
+JH/41 Fix daemon SIGHUP on FreeBSD. Previously, a named socket for IPC was
+ left undeleted; the attempt to re-create it then failed - resulting in
+ the usual "SIGHUP tp have daemon reload configuration" to not work.
+ This affected any platform not supporting "abstract" Unix-domain
+ sockets (i.e. not Linux).
+
+JH/42 Bug 2693: Harden against a peer which reneges on a 452 "too many
+ recipients" response to RCPT in a later response, with a 250. The
+ previous coding assumed this would not happen, and under PIPELINING
+ would result in both lost and duplicate recipients for a message.
+
+JH/43 Bug 2694: Fix weighted distribution of work to multiple spamd servers.
+ Previously the weighting was incorrectly applied. Similar fix for socks
+ proxies. Found and fixed by Heiko Schlichting.
+
+JH/44 Bug 2701: Fix list-expansion of dns_ipv4_lookup. Previously, it did
+ not handle sub-lists included using the +namedlist syntax. While
+ investigating, the same found for dns_trust_aa, dns_again_means_nonexist,
+ dnssec_require_domains, dnssec_request_domains, srv_fail_domains,
+ mx_fail_domains.
+
+JH/45 Use a (new) separate store pool-pair for DKIM verify working data.
+ Previously the permanent pool was used, so the sore could not be freed.
+ This meant a connection with many messages would use continually-growing
+ memory.
+
+JH/46 Use an exponentially-increasing block size when malloc'ing store. Do it
+ per-pool so as not to waste too much space. Previously a constant size
+ was used which resulted in O(n^2) behaviour; now we get O(n log n) making
+ DOS attacks harder. The cost is wasted memory use in the larger blocks.
+
+JH/47 Use explicit alloc/free for DNS lookup workspace. This permits using the
+ same space repeatedly, and a smaller process footprint.
+
+JH/48 Use a less bogus-looking filename for a temporary used for DH-parameters
+ for GnuTLS. Previously the name started "%s" which, while not a bug,
+ looked as if if might be one.
+
+JH/49 Bug 2710: when using SOCKS for additional messages after the first (a
+ "continued connection") make the $proxy_* variables available. Previously
+ the information was not passed across the exec() call for subsequent
+ transport executions. This also mean that the log lines for the
+ messages can show the proxy information.
+
+JH/50 Bug 2672: QT elements in log lines, unless disabled, now exclude the
+ receive time. With modern systems the difference is significant.
+ The historical behaviour can be restored by disabling (a new) log_selector
+ "queue_time_exclusive".
+
+JH/51 Taint-check ACL line. Previously, only filenames (for out-of-line ACL
+ content) were specifically tested for. Now, also cover expansions
+ resulting in ACL names and inline ACL content.
+
+JH/52 Fix ${ip6norm:} operator. Previously, any trailing line text was dropped,
+ making it unusable in complex expressions.
+
+JH/53 Bug 2743: fix immediate-delivery via named queue. Previously this would
+ fail with a taint-check on the spoolfile name, and leave the message
+ queued.
+
+HS/01 Enforce absolute PID file path name.
+
+HS/02 Handle SIGINT as we handle SIGTERM: terminate the Exim process.
+
+PP/01 Add a too-many-bad-recipients guard to the default config's RCPT ACL.
+
+PP/02 Bug 2643: Correct TLS DH constants.
+ A missing NUL termination in our code-generation tool had led to some
+ incorrect Diffie-Hellman constants in the Exim source.
+ Reported by kylon94, code-gen tool fix by Simon Arlott.
+
+PP/03 Impose security length checks on various command-line options.
+ Fixes CVE-2020-SPRSS reported by Qualys.
+
+PP/04 Fix Linux security issue CVE-2020-SLCWD and guard against PATH_MAX
+ better. Reported by Qualys.
+
+PP/05 Fix security issue CVE-2020-PFPSN and guard against cmdline invoker
+ providing a particularly obnoxious sender full name.
+ Reported by Qualys.
+
+PP/06 Fix CVE-2020-28016 (PFPZA): Heap out-of-bounds write in parse_fix_phrase()
+
+PP/07 Refuse to allocate too little memory, block negative/zero allocations.
+ Security guard.
+
+PP/08 Change default for recipients_max from unlimited to 50,000.
+
+PP/09 Fix security issue with too many recipients on a message (to remove a
+ known security problem if someone does set recipients_max to unlimited,
+ or if local additions add to the recipient list).
+ Fixes CVE-2020-RCPTL reported by Qualys.
+
+PP/10 Fix security issue in SMTP verb option parsing
+ Fixes CVE-2020-EXOPT reported by Qualys.
+
+PP/11 Fix security issue in BDAT state confusion.
+ Ensure we reset known-good where we know we need to not be reading BDAT
+ data, as a general case fix, and move the places where we switch to BDAT
+ mode until after various protocol state checks.
+ Fixes CVE-2020-BDATA reported by Qualys.
+
+HS/03 Die on "/../" in msglog file names
+
+QS/01 Creation of (database) files in $spool_dir: only uid=0 or the uid of
+ the Exim runtime user are allowed to create files.
+
+QS/02 PID file creation/deletion: only possible if uid=0 or uid is the Exim
+ runtime user.
+
+QS/03 When reading the output from interpreted forward files we do not
+ pass the pipe between the parent and the interpreting process to
+ executed child processes (if any).
+
+QS/04 Always die if requested from internal logging, even is logging is
+ disabled.
+
+JH/54 DMARC: recent versions of the OpenDMARC library appear to have broken
+ the API; compilation noo longer completes with DMARC support included.
+ This affects 1.4.1-1 on Fedora 33 (1.3.2-3 is functional); and has
+ been reported on other platforms.
+
+JH/55 TLS: as server, reject connections with ALPN indicating non-smtp use.
+
+JH/56 Make the majority of info read from config files readonly, for defence-in-
+ depth against exploits. Suggestion by Qualys.
+ Not supported on Solaris 10.
+
+JH/57 Fix control=fakreject for a custom message containing tainted data.
+ Previously this resulted in a log complaint, due to a re-expansion present
+ since fakereject was originally introduced.
+
+JH/58 GnuTLS: Fix certextract expansion. If a second modifier after a tag
+ modifier was given, a loop resulted.
+
+JH/59 DKIM: Fix small-message verification under TLS with chunking. If a
+ pipelined SMTP command followed the BDAT LAST then it would be
+ incorrectly treated as part of the message body, causing a verification
+ fail.
+
+JH/60 Bug 2805: Fix logging of domain-literals in Message_ID: headers. They
+ require looser validation rules than those for 821-level addresses,
+ which only permit IP addresses.
+
Exim version 4.94
-----------------
git://git.exim.org / exim.git / blobdiff