Testsuite: TLS system CA dirs vary across platforms

[exim.git] / test / runtest

diff --git a/test/runtest b/test/runtest
index a8858b1cb1a56db30cc710d868873164e84eccf8..37ed03b00f385be34cd84861d6eb51b99f9a15ad 100755 (executable)
--- a/test/runtest
+++ b/test/runtest
@@ -64,7 +64,7 @@ my $force_continue = 0;
 my $force_update = 0;
 my $log_failed_filename = 'failed-summary.log';
 my $log_summary_filename = 'run-summary.log';
 my $force_update = 0;
 my $log_failed_filename = 'failed-summary.log';
 my $log_summary_filename = 'run-summary.log';

-my $more = 'less -XF';
+my @more = qw'less -XF';

 my $optargs = '';
 my $save_output = 0;
 my $server_opts = '';
 my $optargs = '';
 my $save_output = 0;
 my $server_opts = '';


@@ -404,7 +404,7 @@ RESET_AFTER_EXTRA_LINE_READ:
 
   # Replace the Exim version number (may appear in various places)
   # patchexim should have fixed this for us
 
   # Replace the Exim version number (may appear in various places)
   # patchexim should have fixed this for us

-  #s/(Exim) \d+\.\d+[\w_-]*/$1 x.yz/i;
+  #s/Exim \K\d+[._]\d+[\w_-]*/x.yz/i;

 
   # Replace Exim message ids by a unique series
   s/((?:[^\W_]{6}-){2}[^\W_]{2})
 
   # Replace Exim message ids by a unique series
   s/((?:[^\W_]{6}-){2}[^\W_]{2})


@@ -800,6 +800,12 @@ RESET_AFTER_EXTRA_LINE_READ:
   # Also, the length of space at the end of the host line is dependent
   # on the length of the longest line, so strip it also on otherwise
   # un-rewritten lines like localhost
   # Also, the length of space at the end of the host line is dependent
   # on the length of the longest line, so strip it also on otherwise
   # un-rewritten lines like localhost

+  #
+  # host 127.0.0.1     [127.0.0.1]
+  # host 10.0.0.1      [10.0.0.1]-
+  #
+  # host 127.0.0.1     [127.0.0.1]--
+  # host 169.16.16.16  [169.16.16.10]

 
   s/^\s+host\s(\S+)\s+(\S+)/  host $1 $2/;
   s/^\s+(host\s\S+\s\S+)\s+(port=.*)/  host $1 $2/;
 
   s/^\s+host\s(\S+)\s+(\S+)/  host $1 $2/;
   s/^\s+(host\s\S+\s\S+)\s+(port=.*)/  host $1 $2/;


@@ -811,7 +817,7 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/(^|\W)\K\Q$parm_ipv6_stripped\E/ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6/g;
   s/\b\Q$parm_ipv4r\E\b/ip4-reverse/g;
   s/(^|\W)\K\Q$parm_ipv6r\E/ip6-reverse/g;
   s/(^|\W)\K\Q$parm_ipv6_stripped\E/ip6:ip6:ip6:ip6:ip6:ip6:ip6:ip6/g;
   s/\b\Q$parm_ipv4r\E\b/ip4-reverse/g;
   s/(^|\W)\K\Q$parm_ipv6r\E/ip6-reverse/g;

-  s/^(\s+host\s\S+\s+\[\S+\]) +$/$1 /;
+  s/^\s+host\s\S+\s+\[\S+\]\K +$//;     # strip, not collapse the trailing whitespace

 
 
   # ======== Test network IP addresses ========
 
 
   # ======== Test network IP addresses ========


@@ -821,11 +827,10 @@ RESET_AFTER_EXTRA_LINE_READ:
 
   # ======== IP error numbers and messages ========
   # These vary between operating systems
 
   # ======== IP error numbers and messages ========
   # These vary between operating systems

-  s/Can't assign requested address/Network Error/;
-  s/Cannot assign requested address/Network Error/;
+  s/Can(no|')t assign requested address/Network Error/;

   s/Operation timed out/Connection timed out/;
   s/Address family not supported by protocol family/Network Error/;
   s/Operation timed out/Connection timed out/;
   s/Address family not supported by protocol family/Network Error/;

-  s/Network is unreachable/Network Error/;
+  s/Network( is)? unreachable/Network Error/;

   s/Invalid argument/Network Error/;
 
   s/\(\d+\): Network/(dd): Network/;
   s/Invalid argument/Network Error/;
 
   s/\(\d+\): Network/(dd): Network/;


@@ -887,7 +892,7 @@ RESET_AFTER_EXTRA_LINE_READ:
   # The sizes of filter files may vary because of the substitution of local
   # filenames, logins, etc.
 
   # The sizes of filter files may vary because of the substitution of local
   # filenames, logins, etc.
 

-  s/^\d+(?= bytes read from )/ssss/;
+  s/^\d+(?= (\(tainted\) )?bytes read from )/ssss/;

 
 
   # ======== OpenSSL error messages ========
 
 
   # ======== OpenSSL error messages ========


@@ -911,7 +916,7 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/renamed tmp\/\d+\.[^.]+\.(\S+) as new\/\d+\.[^.]+\.(\S+)/renamed tmp\/MAILDIR.$1 as new\/MAILDIR.$1/;
 
   # Maildir file names in general
   s/renamed tmp\/\d+\.[^.]+\.(\S+) as new\/\d+\.[^.]+\.(\S+)/renamed tmp\/MAILDIR.$1 as new\/MAILDIR.$1/;
 
   # Maildir file names in general

-  s/\b\d+\.H\d+P\d+\b/dddddddddd.HddddddPddddd/;
+  s/\b\d+\.M\d+P\d+\b/dddddddddd.HddddddPddddd/;

 
   # Maildirsize data
   while (/^\d+S,\d+C\s*$/)
 
   # Maildirsize data
   while (/^\d+S,\d+C\s*$/)


@@ -929,7 +934,7 @@ RESET_AFTER_EXTRA_LINE_READ:
 
   # SRS timestamps and signatures vary by hostname and from run to run
 
 
   # SRS timestamps and signatures vary by hostname and from run to run
 

-  s/SRS0=....=..=[^=]+=[^@]+\@test.ex/SRS0=ZZZZ=YY=the.local.host.name=CALLER\@test.ex/;
+  s/(?i)SRS0=....=.[^=]?=([^=]+)=([^@]+)\@([^ ]+)/SRS0=ZZZZ=YY=$1=$2\@$3/g;

 
 
   # ======== Output from the "fd" program about open descriptors ========
 
 
   # ======== Output from the "fd" program about open descriptors ========


@@ -937,9 +942,7 @@ RESET_AFTER_EXTRA_LINE_READ:
   # at least we'll still be checking the number of open fd's.
 
   s/max fd = \d+/max fd = dddd/;
   # at least we'll still be checking the number of open fd's.
 
   s/max fd = \d+/max fd = dddd/;

-  s/status=0 RDONLY/STATUS/g;
-  s/status=1 WRONLY/STATUS/g;
-  s/status=2 RDWR/STATUS/g;
+  s/status=[0-9a-f]+ (?:RDONLY|WRONLY|RDWR)/STATUS/g;

 
 
   # ======== Contents of spool files ========
 
 
   # ======== Contents of spool files ========


@@ -948,12 +951,6 @@ RESET_AFTER_EXTRA_LINE_READ:
   s/^\d\d\d(?=[PFS*])/ddd/;
 
 
   s/^\d\d\d(?=[PFS*])/ddd/;
 
 

-  # ========= Exim lookups ==================
-  # Lookups have a char which depends on the number of lookup types compiled in,
-  # in stderr output.  Replace with a "0".  Recognising this while avoiding
-  # other output is fragile; perhaps the debug output should be revised instead.
-  s%(?<!sqlite)(?<!lsearch\*@)(?<!lsearch\*)(?<!lsearch)[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
-

   # ==========================================================
   # MIME boundaries in RFC3461 DSN messages
   s/\d{8,10}-eximdsn-\d+/NNNNNNNNNN-eximdsn-MMMMMMMMMM/;
   # ==========================================================
   # MIME boundaries in RFC3461 DSN messages
   s/\d{8,10}-eximdsn-\d+/NNNNNNNNNN-eximdsn-MMMMMMMMMM/;


@@ -1025,6 +1022,9 @@ RESET_AFTER_EXTRA_LINE_READ:
     # TLS resumption is not always supported by the build
     next if /^tls_resumption_hosts =/;
     next if /^-tls_resumption/;
     # TLS resumption is not always supported by the build
     next if /^tls_resumption_hosts =/;
     next if /^-tls_resumption/;

+
+    # gsasl library version may not support some methods
+    s/250-AUTH ANONYMOUS PLAIN SCRAM-SHA-1\K SCRAM-SHA-256//;

     }
 
   # ======== stderr ========
     }
 
   # ======== stderr ========


@@ -1040,6 +1040,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     s/(?<=^>>>>>>>>>>>>>>>> Exim pid=)\d+(?= terminating)/pppp/;
     s/^(proxy-proc \w{5}-pid) \d+$/$1 pppp/;
     s/^(?:\s*\d+ )(exec .* -oPX)$/pppp $1/;
     s/(?<=^>>>>>>>>>>>>>>>> Exim pid=)\d+(?= terminating)/pppp/;
     s/^(proxy-proc \w{5}-pid) \d+$/$1 pppp/;
     s/^(?:\s*\d+ )(exec .* -oPX)$/pppp $1/;

+    next if /(?:postfork: | fork(?:ing|ed) for )/;

 
     # IP address lookups use gethostbyname() when IPv6 is not supported,
     # and gethostbyname2() or getipnodebyname() when it is.
 
     # IP address lookups use gethostbyname() when IPv6 is not supported,
     # and gethostbyname2() or getipnodebyname() when it is.


@@ -1049,6 +1050,12 @@ RESET_AFTER_EXTRA_LINE_READ:
     # we don't care what TZ enviroment the testhost was running
     next if /^Reset TZ to/;
 
     # we don't care what TZ enviroment the testhost was running
     next if /^Reset TZ to/;
 

+    # ========= Exim lookups ==================
+    # Lookups have a char which depends on the number of lookup types compiled in,
+    # in stderr output.  Replace with a "0".  Recognising this while avoiding
+    # other output is fragile; perhaps the debug output should be revised instead.
+    s%^\s+(:?closing )?\K[0-?]TESTSUITE/aux-fixed/%0TESTSUITE/aux-fixed/%g;
+

     # drop gnutls version strings
     next if /GnuTLS compile-time version: \d+[\.\d]+$/;
     next if /GnuTLS runtime version: \d+[\.\d]+$/;
     # drop gnutls version strings
     next if /GnuTLS compile-time version: \d+[\.\d]+$/;
     next if /GnuTLS runtime version: \d+[\.\d]+$/;


@@ -1060,6 +1067,27 @@ RESET_AFTER_EXTRA_LINE_READ:
     # this is timing-dependent
     next if /^OpenSSL: creating STEK$/;
 
     # this is timing-dependent
     next if /^OpenSSL: creating STEK$/;
 

+    # TLS preload
+    # only OpenSSL speaks of these
+    next if /^TLS: preloading DH params for server/;
+    next if /^Diffie-Hellman initialized from default/;
+    next if /^TLS: preloading ECDH curve for server/;
+    next if /^ECDH OpenSSL [\d.+]+ temp key parameter settings: default selection$/;
+    next if /^watch dir/;
+
+    # TLS preload
+    # only GnuTLS speaks of these
+    next if /^GnuTLS global init required$/;
+    next if /^TLS: basic cred init, server/;
+    next if /^TLS: preloading cipher list for server: NULL$/;
+    s/^GnuTLS using default session cipher\/priority "NORMAL"$/TLS: not preloading cipher list for server/;
+    next if /^GnuTLS<2>: added \d+ protocols, \d+ ciphersuites, \d+ sig algos and \d+ groups into priority list$/;
+
+    # TLS preload
+    # there happen in different orders for OpenSSL/GnuTLS/noTLS
+    next if /^TLS: not preloading (CA bundle|cipher list) for server$/;
+    next if /^TLS: not preloading server certs$/;
+

     # drop lookups
     next if /^Lookups \(built-in\):/;
     next if /^Loading lookup modules from/;
     # drop lookups
     next if /^Lookups \(built-in\):/;
     next if /^Loading lookup modules from/;


@@ -1118,6 +1146,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     next if /DNS lookup of \S+ \(AAAA\) using fakens/;
     next if / in dns_ipv4_lookup?/;
     next if / writing neg-cache entry for .*AAAA/;
     next if /DNS lookup of \S+ \(AAAA\) using fakens/;
     next if / in dns_ipv4_lookup?/;
     next if / writing neg-cache entry for .*AAAA/;

+    next if /^faking res_search\(AAAA\) response length as 65535/;

 
     if (/DNS lookup of \S+ \(AAAA\) gave NO_DATA/)
       {
 
     if (/DNS lookup of \S+ \(AAAA\) gave NO_DATA/)
       {


@@ -1125,6 +1154,17 @@ RESET_AFTER_EXTRA_LINE_READ:
       next;
       }
 
       next;
       }
 

+    # Non-TLS bulds have a different Recieved: header expansion
+    s/^((.*)\t}}}}by \$primary_hostname \$\{if def:received_protocol \{with \$received_protocol }})\(Exim \$version_number\)$/$1\${if def:tls_in_cipher_std { tls \$tls_in_cipher_std\n$2\t}}(Exim \$version_number)/;
+    s/^((\s*).*considering: with \$received_protocol }})\(Exim \$version_number\)$/$1\${if def:tls_in_cipher_std { tls \$tls_in_cipher_std\n$2\t}}(Exim \$version_number)/;
+    if (/condition: def:tls_in_cipher_std$/)
+      {
+      $_= <IN>; $_= <IN>; $_= <IN>; $_= <IN>;
+      $_= <IN>; $_= <IN>; $_= <IN>; $_= <IN>;
+      $_= <IN>; $_= <IN>; $_= <IN>; next;
+      }
+
+

     # Skip tls_advertise_hosts and hosts_require_tls checks when the options
     # are unset, because tls ain't always there.
 
     # Skip tls_advertise_hosts and hosts_require_tls checks when the options
     # are unset, because tls ain't always there.
 


@@ -1182,16 +1222,37 @@ RESET_AFTER_EXTRA_LINE_READ:
     # Platform-dependent error strings
     s/Operation timed out/Connection timed out/;
 
     # Platform-dependent error strings
     s/Operation timed out/Connection timed out/;
 

+    # Platform differences on disconnect
+    s/unexpected disconnection while reading SMTP command from \[127.0.0.1\] \K\(error: Connection reset by peer\) //;
+

     # Platform-dependent resolver option bits
     s/^ (?:writing|update) neg-cache entry for [^,]+-\K[0-9a-f]+, ttl/xxxx, ttl/;
 
     # timing variance, run-to-run
     s/^time on queue = \K1s/0s/;
 
     # Platform-dependent resolver option bits
     s/^ (?:writing|update) neg-cache entry for [^,]+-\K[0-9a-f]+, ttl/xxxx, ttl/;
 
     # timing variance, run-to-run
     s/^time on queue = \K1s/0s/;
 

+    # content-scan: file order can vary in directory
+    s%unspool_mbox\(\): unlinking 'TESTSUITE/spool/scan/[^/]*/\K[^\']*%FFFFFFFFF%;
+

     # Skip hosts_require_dane checks when the options
     # are unset, because dane ain't always there.
     next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
 
     # Skip hosts_require_dane checks when the options
     # are unset, because dane ain't always there.
     next if /in\shosts_require_dane\?\sno\s\(option\sunset\)/x;
 

+    # daemon notifier socket
+    s/^(\s*\d+|ppppp) (creating notifier socket)$/ppppp $2/;
+    s/^ \@(.*exim_daemon_notify)$/ $1/;
+    s/^(\s*\d+|ppppp)  \@?(.*exim_daemon_notify)$/ppppp  $2/;
+    next if /unlinking notifier socket/;
+
+    # daemon notifier socket
+    # Timing variance over runs.  Collapse repeated memssages.
+    if (/notify triggered queue run/)
+      {
+      my $line = $_;
+      while (/notify triggered queue run/) { $_ = <IN>; }
+      $_ = $line . $_;
+      }
+

     # DISABLE_OCSP
     next if /in hosts_requ(est|ire)_ocsp\? (no|yes)/;
 
     # DISABLE_OCSP
     next if /in hosts_requ(est|ire)_ocsp\? (no|yes)/;
 


@@ -1245,7 +1306,7 @@ RESET_AFTER_EXTRA_LINE_READ:
     next if /^DKIM \[[^[]+\] (Header hash|b) computed:/;
 
     # Not all platforms support TCP Fast Open, and the compile omits the check
     next if /^DKIM \[[^[]+\] (Header hash|b) computed:/;
 
     # Not all platforms support TCP Fast Open, and the compile omits the check

-    if (s/\S+ in hosts_try_fastopen\? (no \(option unset\)|yes \(matched "\*"\))\n$//)
+    if (s/\S+ in hosts_try_fastopen\? (no \(option unset\)|no \(end of list\)|yes \(matched "\*"\))\n$//)

       {
       chomp;
       $_ .= <IN>;
       {
       chomp;
       $_ .= <IN>;


@@ -1293,6 +1354,9 @@ RESET_AFTER_EXTRA_LINE_READ:
     next if /^Waiting for MySQL server to answer/;
     next if /mysqladmin: CREATE DATABASE failed; .* database exists/;
 
     next if /^Waiting for MySQL server to answer/;
     next if /mysqladmin: CREATE DATABASE failed; .* database exists/;
 

+    # Postgres version-dependent differences
+    s/^initdb: warning: (enabling "trust" authentication for local connections)$/\nWARNING: $1/;
+

     # Not all builds include DMARC
     next if /^DMARC: no (dmarc_tld_file|sender_host_address)$/ ;
 
     # Not all builds include DMARC
     next if /^DMARC: no (dmarc_tld_file|sender_host_address)$/ ;
 


@@ -1302,6 +1366,13 @@ RESET_AFTER_EXTRA_LINE_READ:
     # Platform differences in errno strings
     s/  SMTP\(Operation timed out\)<</  SMTP(Connection timed out)<</;
 
     # Platform differences in errno strings
     s/  SMTP\(Operation timed out\)<</  SMTP(Connection timed out)<</;
 

+    # Platform differences for errno values (eg. Hurd)
+    s/^errno = \d+$/errno = EEE/;
+    s/^writing error \d+: /writing error EEE: /;
+
+    # Some platforms have to flip to slow-mode taint-checking
+    next if /switching to slow-mode taint checking/;
+

     # When Exim is checking the size of directories for maildir, it uses
     # the check_dir_size() function to scan directories. Of course, the order
     # of the files that are obtained using readdir() varies from system to
     # When Exim is checking the size of directories for maildir, it uses
     # the check_dir_size() function to scan directories. Of course, the order
     # of the files that are obtained using readdir() varies from system to


@@ -1360,7 +1431,7 @@ RESET_AFTER_EXTRA_LINE_READ:
 
     # openssl version variances
     s/(TLS error on connection [^:]*: error:)[0-9A-F]{8}(:system library):(?:fopen|func\(4095\)):(No such file or directory)$/$1xxxxxxxx$2:fopen:$3/;
 
     # openssl version variances
     s/(TLS error on connection [^:]*: error:)[0-9A-F]{8}(:system library):(?:fopen|func\(4095\)):(No such file or directory)$/$1xxxxxxxx$2:fopen:$3/;

-    s/(DANE attempt failed.*error:)[0-9A-F]{8}(:SSL routines:)(ssl3_get_server_certificate|tls_process_server_certificate|CONNECT_CR_CERT)(?=:certificate verify failed$)/$1xxxxxxxx$2ssl3_get_server_certificate/;
+    s/(DANE attempt failed.*error:)[0-9A-F]{8}(:SSL routines:)(?:(?i)ssl3_get_server_certificate|tls_process_server_certificate|CONNECT_CR_CERT)(?=:certificate verify failed$)/$1xxxxxxxx$2ssl3_get_server_certificate/;

     s/(DKIM: validation error: )error:[0-9A-F]{8}:rsa routines:(?:(?i)int_rsa_verify|CRYPTO_internal):(?:bad signature|algorithm mismatch)$/$1Public key signature verification has failed./;
     s/ARC: AMS signing: privkey PEM-block import: error:\K[0-9A-F]{8}:(PEM routines):get_name:(no start line)/0906D06C:$1:PEM_read_bio:$2/;
 
     s/(DKIM: validation error: )error:[0-9A-F]{8}:rsa routines:(?:(?i)int_rsa_verify|CRYPTO_internal):(?:bad signature|algorithm mismatch)$/$1Public key signature verification has failed./;
     s/ARC: AMS signing: privkey PEM-block import: error:\K[0-9A-F]{8}:(PEM routines):get_name:(no start line)/0906D06C:$1:PEM_read_bio:$2/;
 


@@ -1386,6 +1457,9 @@ RESET_AFTER_EXTRA_LINE_READ:
       my ($prefix, $t_diff) = ($1, $3 - $2);
       s/DKIM: d=.* t=[0-9]* x=[0-9]* /${prefix} t=T x=T+${t_diff} /;
       }
       my ($prefix, $t_diff) = ($1, $3 - $2);
       s/DKIM: d=.* t=[0-9]* x=[0-9]* /${prefix} t=T x=T+${t_diff} /;
       }

+    # GnuTLS reports a different keysize vs. OpenSSL, for ed25519 keys
+    s/signer: [^ ]* bits:\K 256/ 253/;
+    s/public key too short:\K 256 bits/ 253 bits/;

 
     # port numbers
     s/(?:\[[^\]]*\]:|port )\K$parm_port_d/PORT_D/;
 
     # port numbers
     s/(?:\[[^\]]*\]:|port )\K$parm_port_d/PORT_D/;


@@ -1396,6 +1470,11 @@ RESET_AFTER_EXTRA_LINE_READ:
     s/(?:\[[^\]]*\]:|port )\K$parm_port_n/PORT_N/;
     s/I=\[[^\]]*\]:\K\d+/ppppp/;
 
     s/(?:\[[^\]]*\]:|port )\K$parm_port_n/PORT_N/;
     s/I=\[[^\]]*\]:\K\d+/ppppp/;
 

+    # Platform differences for errno values (eg. Hurd).  Leave 0 and negative numbers alone.
+    s/R=\w+ T=\w+ defer\K \([1-9]\d*\): / (EEE): /;
+
+    # Platform differences in errno strings
+    s/Arg list too long/Argument list too long/;

     }
 
   # ======== mail ========
     }
 
   # ======== mail ========


@@ -1548,7 +1627,7 @@ if (! -e $sf_current)
       print "\n";
       print "------------ $f -----------\n"
         if (defined $rf && -s $rf && defined $rsf && -s $rsf);
       print "\n";
       print "------------ $f -----------\n"
         if (defined $rf && -s $rf && defined $rsf && -s $rsf);

-      system("$more '$f'");
+      system @more => $f;

       }
     }
 
       }
     }
 


@@ -1630,26 +1709,25 @@ if (-e $sf_current)
         }
       }
 
         }
       }
 

-    open(MUNGED, '>', $mf) || tests_exit(-1, "Failed to open $mf: $!");
-    for ($i = 0; $i < @munged; $i++)
-      { print MUNGED $munged[$i]; }
-    close(MUNGED);
+    open(my $fh, '>', $mf) or tests_exit(-1, "Failed to open $mf: $!");
+    print $fh @munged;

     }
 
   # Deal with log sorting
 
   if ($sortfile)
     {
     }
 
   # Deal with log sorting
 
   if ($sortfile)
     {

-    my(@munged, $i, $j);

 
 

-    open(MUNGED, $mf) || tests_exit(-1, "Failed to open $mf: $!");
-    @munged = <MUNGED>;
-    close(MUNGED);
+    my @munged = do {
+      open(my $fh, '<', $mf) or tests_exit(-1, "Failed to open $mf: $!");
+      <$fh>;
+    };

 
 

-    for ($i = 0; $i < @munged; $i++)
+    for (my $i = 0; $i < @munged; $i++)

       {
       if ($munged[$i] =~ /^[-\d]{10}\s[:\d]{8}\s[-A-Za-z\d]{16}\s[-=*]>/)
         {
       {
       if ($munged[$i] =~ /^[-\d]{10}\s[:\d]{8}\s[-A-Za-z\d]{16}\s[-=*]>/)
         {

+        my $j;

         for ($j = $i + 1; $j < @munged; $j++)
           {
           last if $munged[$j] !~
         for ($j = $i + 1; $j < @munged; $j++)
           {
           last if $munged[$j] !~


@@ -1661,11 +1739,9 @@ if (-e $sf_current)
         }
       }
 
         }
       }
 

-    open(MUNGED, ">$mf") || tests_exit(-1, "Failed to open $mf: $!");
-    print MUNGED "**NOTE: The delivery lines in this file have been sorted.\n";
-    for ($i = 0; $i < @munged; $i++)
-      { print MUNGED $munged[$i]; }
-    close(MUNGED);
+    open(my $fh, '>', $mf) or tests_exit(-1, "Failed to open $mf: $!");
+    print $fh "**NOTE: The delivery lines in this file have been sorted.\n";
+    print $fh @munged;

     }
 
   # Do the comparison
     }
 
   # Do the comparison


@@ -1675,7 +1751,7 @@ if (-e $sf_current)
   # Handle comparison failure
 
   print "** Comparison of $mf with $sf_current failed";
   # Handle comparison failure
 
   print "** Comparison of $mf with $sf_current failed";

-  system("$more test-cf");
+  system @more => 'test-cf';

 
   print "\n";
   for (;;)
 
   print "\n";
   for (;;)


@@ -1706,8 +1782,7 @@ else
     # if we deal with a flavour file, we can't delete it, because next time the generic
     # file would be used again
     if ($sf_current eq $sf_flavour) {
     # if we deal with a flavour file, we can't delete it, because next time the generic
     # file would be used again
     if ($sf_current eq $sf_flavour) {

-      open(FOO, ">$sf_current");
-      close(FOO);
+      open(my $fh, '>', $sf_current);

     }
     else {
       tests_exit(-1, "Failed to unlink $sf_current") if !unlink($sf_current);
     }
     else {
       tests_exit(-1, "Failed to unlink $sf_current") if !unlink($sf_current);


@@ -1773,7 +1848,7 @@ $munges =
     },
 
     'debug_pid' =>
     },
 
     'debug_pid' =>

-    { 'stderr' => 's/(^\s{0,4}|(?<=Process )|(?<=child ))\d{1,5}/ppppp/g' },
+    { 'stderr' => 's/(^\s{0,4}|(?<=Process )|(?<=child ))\d+/ppppp/g' },

 
     'optional_dsn_info' =>
     { 'mail' => '/^(X-(Remote-MTA-(smtp-greeting|helo-response)|Exim-Diagnostic|(body|message)-linecount):|Remote-MTA: X-ip;)/'
 
     'optional_dsn_info' =>
     { 'mail' => '/^(X-(Remote-MTA-(smtp-greeting|helo-response)|Exim-Diagnostic|(body|message)-linecount):|Remote-MTA: X-ip;)/'


@@ -1807,7 +1882,7 @@ $munges =
     },
 
     'timeout_errno' =>         # actual errno differs Solaris vs. Linux
     },
 
     'timeout_errno' =>         # actual errno differs Solaris vs. Linux

-    { 'mainlog' => 's/(host deferral .* errno) <\d+> /$1 <EEE> /' },
+    { 'mainlog' => 's/((?:host|message) deferral .* errno) <\d+> /$1 <EEE> /' },

 
     'peer_terminated_conn' =>  # actual error differs FreedBSD vs. Linux
     { 'stderr' => 's/^(  SMTP\()Connection reset by peer(\)<<)$/$1closed$2/' },
 
     'peer_terminated_conn' =>  # actual error differs FreedBSD vs. Linux
     { 'stderr' => 's/^(  SMTP\()Connection reset by peer(\)<<)$/$1closed$2/' },


@@ -2169,34 +2244,37 @@ if (/^dbmbuild\s+(\S+)\s+(\S+)/)
 
 if (/^dump\s+(\S+)/)
   {
 
 if (/^dump\s+(\S+)/)
   {

-  my($which) = $1;
-  my(@temp);
+  my $which  = $1;

   print ">> ./eximdir/exim_dumpdb $parm_cwd/spool $which\n" if $debug;
   print ">> ./eximdir/exim_dumpdb $parm_cwd/spool $which\n" if $debug;

-  open(IN, "./eximdir/exim_dumpdb $parm_cwd/spool $which |");
-  open(OUT, ">>test-stdout");
-  print OUT "+++++++++++++++++++++++++++\n";
+  open(my $in, "-|", './eximdir/exim_dumpdb', "$parm_cwd/spool", $which) or die "Can't run exim_dumpdb: $!";
+  open(my $out, ">>test-stdout");
+  print $out "+++++++++++++++++++++++++++\n";

 
   if ($which eq "retry")
     {
 
   if ($which eq "retry")
     {

-    $/ = "\n  ";
-    @temp = <IN>;
-    $/ = "\n";
-
-    @temp = sort {
-                   my($aa) = split(' ', $a);
-                   my($bb) = split(' ', $b);
-                   return $aa cmp $bb;
-                 } @temp;
-
+    # the sort key is the first part of the retry db dump line, but for
+    # sorting we (temporarly) replace the own hosts ipv4 with a munged
+    # version, which matches the munging that is done later
+    # Why? We must ensure sure, that 127.0.0.1 always sorts first
+    # map-sort-map: Schwartz's transformation
+    # test 0099
+    my @temp = map  { $_->[1] }
+               sort { $a->[0] cmp $b->[0] }
+               #map  { [ (split)[0] =~ s/\Q$parm_ipv4/ip4.ip4.ip4.ip4/gr, $_ ] }  # this is too modern for 5.10.1
+               map  {
+                (my $k = (split)[0]) =~ s/\Q$parm_ipv4/ip4.ip4.ip4.ip4/g;
+                [ $k, $_ ]
+               }
+               do { local $/ = "\n  "; <$in> };

     foreach $item (@temp)
       {
       $item =~ s/^\s*(.*)\n(.*)\n?\s*$/$1\n$2/m;
     foreach $item (@temp)
       {
       $item =~ s/^\s*(.*)\n(.*)\n?\s*$/$1\n$2/m;

-      print OUT "  $item\n";
+      print $out "  $item\n";

       }
     }
   else
     {
       }
     }
   else
     {

-    @temp = <IN>;
+    my @temp = <$in>;

     if ($which eq "callout")
       {
       @temp = sort {
     if ($which eq "callout")
       {
       @temp = sort {


@@ -2205,11 +2283,9 @@ if (/^dump\s+(\S+)/)
                    return $aa cmp $bb;
                    } @temp;
       }
                    return $aa cmp $bb;
                    } @temp;
       }

-    print OUT @temp;
+    print $out @temp;

     }
     }

-
-  close(IN);
-  close(OUT);
+  close($in); # close it explicitly, otherwise $? does not get set

   return 1;
   }
 
   return 1;
   }
 


@@ -2299,8 +2375,7 @@ if (/^gnutls/)
 
 
 # The "killdaemon" command should ultimately follow the starting of any Exim
 
 
 # The "killdaemon" command should ultimately follow the starting of any Exim

-# daemon with the -bd option. We kill with SIGINT rather than SIGTERM to stop
-# it outputting "Terminated" to the terminal when not in the background.
+# daemon with the -bd option.

 
 if (/^killdaemon/)
   {
 
 if (/^killdaemon/)
   {


@@ -2312,14 +2387,14 @@ if (/^killdaemon/)
     print ">> killdaemon: recovered pid $pid\n" if $debug;
     if ($pid)
       {
     print ">> killdaemon: recovered pid $pid\n" if $debug;
     if ($pid)
       {

-      run_system("sudo /bin/kill -INT $pid");
+      run_system("sudo /bin/kill -TERM $pid");

       wait;
       }
     } else {
     $pid = `cat $parm_cwd/spool/exim-daemon.*`;
     if ($pid)
       {
       wait;
       }
     } else {
     $pid = `cat $parm_cwd/spool/exim-daemon.*`;
     if ($pid)
       {

-      run_system("sudo /bin/kill -INT $pid");
+      run_system("sudo /bin/kill -TERM $pid");

       close DAEMONCMD;                                   # Waits for process
       }
     }
       close DAEMONCMD;                                   # Waits for process
       }
     }


@@ -2552,9 +2627,24 @@ elsif (/^((?i:[A-Z\d_]+=\S+\s+)+)?(\d+)?\s*(sudo(?:\s+-u\s+(\w+))?\s+)?exim(_\S+
 
   if ($args =~ /\$msg/)
     {
 
   if ($args =~ /\$msg/)
     {

-    my @listcmd  = ("$parm_cwd/eximdir/exim", '-bp',
+    my($queuespec);
+    if ($args =~ /-qG\w+/) { $queuespec = $&; }
+
+    my @listcmd;
+
+    if (defined $queuespec)
+      {
+      @listcmd  = ("$parm_cwd/eximdir/exim", '-bp',
+                  $queuespec,
+                   "-DEXIM_PATH=$parm_cwd/eximdir/exim",
+                   -C => "$parm_cwd/test-config");
+      }
+    else
+      {
+      @listcmd  = ("$parm_cwd/eximdir/exim", '-bp',

                    "-DEXIM_PATH=$parm_cwd/eximdir/exim",
                    -C => "$parm_cwd/test-config");
                    "-DEXIM_PATH=$parm_cwd/eximdir/exim",
                    -C => "$parm_cwd/test-config");

+      }

     print ">> Getting queue list from:\n>>    @listcmd\n" if $debug;
     # We need the message ids sorted in ascending order.
     # Message id is: <timestamp>-<pid>-<fractional-time>. On some systems (*BSD) the
     print ">> Getting queue list from:\n>>    @listcmd\n" if $debug;
     # We need the message ids sorted in ascending order.
     # Message id is: <timestamp>-<pid>-<fractional-time>. On some systems (*BSD) the


@@ -2706,8 +2796,9 @@ else { tests_exit(-1, "Command unrecognized in line $lineno: $_"); }
 
 
 # Run the command, with stdin connected to a pipe, and write the stdin data
 
 
 # Run the command, with stdin connected to a pipe, and write the stdin data

-# to it, with appropriate substitutions. If a line ends with \NONL\, chop off
-# the terminating newline (and the \NONL\). If the command contains
+# to it, with appropriate substitutions. If a starts with '>>> ', process it
+# via Perl's string eval().
+# If the command contains

 # -DSERVER=server add "-server" to the command, where it will adjoin the name
 # for the stderr file. See comment above about the use of -DSERVER.
 
 # -DSERVER=server add "-server" to the command, where it will adjoin the name
 # for the stderr file. See comment above about the use of -DSERVER.
 


@@ -2721,7 +2812,8 @@ while (<SCRIPT>)
   $lineno++;
   last if /^\*{4}\s*$/;
   do_substitute($testno);
   $lineno++;
   last if /^\*{4}\s*$/;
   do_substitute($testno);

-  if (/^(.*)\\NONL\\\s*$/) { print CMD $1; } else { print CMD; }
+  s/^\\(>>>\s.*)/$1/ or s/^>>>\s(.*)\s*$/$1/ and $_ = eval "\"$1\"";
+  print CMD;

   }
 
 # For timeout tests, wait before closing the pipe; we expect a
   }
 
 # For timeout tests, wait before closing the pipe; we expect a


@@ -2779,7 +2871,7 @@ umask 022;
 #       Check for the "less" command             #
 ##################################################
 
 #       Check for the "less" command             #
 ##################################################
 

-$more = 'more' if system('which less >/dev/null 2>&1') != 0;
+@more = 'more' if system('which less >/dev/null 2>&1') != 0;

 
 
 
 
 
 


@@ -2804,7 +2896,7 @@ Getopt::Long::Configure qw(no_getopt_compat);
 GetOptions(
     'debug'    => sub { $debug          = 1; $cr   = "\n" },
     'diff'     => sub { $cf             = 'diff -u' },
 GetOptions(
     'debug'    => sub { $debug          = 1; $cr   = "\n" },
     'diff'     => sub { $cf             = 'diff -u' },

-    'continue' => sub { $force_continue = 1; $more = 'cat' },
+    'continue' => sub { $force_continue = 1; @more = 'cat' },

     'update'   => \$force_update,
     'ipv4!'    => \$have_ipv4,
     'ipv6!'    => \$have_ipv6,
     'update'   => \$force_update,
     'ipv4!'    => \$have_ipv4,
     'ipv6!'    => \$have_ipv6,


@@ -3431,14 +3523,15 @@ while (not ($parm_ipv4 and $parm_ipv6) and defined($_ = <IFCONFIG>))
 
   if (not $parm_ipv4 and /^\s*inet(?:\saddr(?:ess))?:?\s*(\d+\.\d+\.\d+\.\d+)(?:\/\d+)?\s/i)
     {
 
   if (not $parm_ipv4 and /^\s*inet(?:\saddr(?:ess))?:?\s*(\d+\.\d+\.\d+\.\d+)(?:\/\d+)?\s/i)
     {

-    # It would ne nice to be able to vary the /16 used for manyhome; we could take
+    # It would be nice to be able to vary the /16 used for manyhome; we could take

     # an option to runtest used here - but we'd also have to pass it on to fakens.
     # Possibly an environment variable?
     next if $1 eq '0.0.0.0' or $1 =~ /^(?:127|10\.250)\./;
     $parm_ipv4 = $1;
     }
 
     # an option to runtest used here - but we'd also have to pass it on to fakens.
     # Possibly an environment variable?
     next if $1 eq '0.0.0.0' or $1 =~ /^(?:127|10\.250)\./;
     $parm_ipv4 = $1;
     }
 

-  if (not $parm_ipv6 and /^\s*inet6(?:\saddr(?:ess))?:?\s*([abcdef\d:]+)(?:%[^ \/]+)?(?:\/\d+)?/i)
+  if (   (not $parm_ipv6 or $parm_ipv6 =~ /%/)
+     and /^\s*inet6(?:\saddr(?:ess))?:?\s*([abcdef\d:]+)(?:%[^ \/]+)?(?:\/\d+)?/i)

     {
     next if $1 eq '::' or $1 eq '::1' or $1 =~ /^ff00/i or $1 =~ /^fe80::1/i;
     $parm_ipv6 = $1;
     {
     next if $1 eq '::' or $1 eq '::1' or $1 =~ /^ff00/i or $1 =~ /^fe80::1/i;
     $parm_ipv6 = $1;


@@ -3807,6 +3900,10 @@ DIR: for (my $i = 0; $i < @test_dirs; $i++)
        }
        unlink("$parm_cwd/test-config");
         }
        }
        unlink("$parm_cwd/test-config");
         }

+      elsif (/^ipv6-non-linklocal/)
+       {
+       if ($parm_ipv6 =~ /%/) { $wantthis = 0; last; }
+       }

       else
         {
         tests_exit(-1, "Unknown line in \"scripts/$testdir/REQUIRES\": \"$_\"");
       else
         {
         tests_exit(-1, "Unknown line in \"scripts/$testdir/REQUIRES\": \"$_\"");


@@ -3947,7 +4044,7 @@ if ($have_ipv4 && $parm_ipv4 ne "127.0.0.1")
       tests_exit(-1, "Failed  to open $parm_cwd/dnszones/db.ip4.$components[0]: $!");
     print OUT "$components[3].$components[2].$components[1]  PTR  $parm_hostname.\n\n";
     close(OUT);
       tests_exit(-1, "Failed  to open $parm_cwd/dnszones/db.ip4.$components[0]: $!");
     print OUT "$components[3].$components[2].$components[1]  PTR  $parm_hostname.\n\n";
     close(OUT);

-    } 
+    }

   else
     {
     open(OUT, ">$parm_cwd/dnszones/db.ip4.$components[0]") ||
   else
     {
     open(OUT, ">$parm_cwd/dnszones/db.ip4.$components[0]") ||


@@ -4299,11 +4396,11 @@ foreach $test (@test_list)
         last if /^[rc]$/i;
         if (/^e$/i)
           {
         last if /^[rc]$/i;
         if (/^e$/i)
           {

-          system("$more test-stderr");
+          system @more => 'test-stderr';

           }
         elsif (/^o$/i)
           {
           }
         elsif (/^o$/i)
           {

-          system("$more test-stdout");
+          system @more => 'test-stdout';

           }
         }
 
           }
         }