* Exim - an Internet mail transport agent *
*************************************************/
-/* Copyright (c) University of Cambridge 1995 - 2016 */
+/* Copyright (c) University of Cambridge 1995 - 2018 */
/* See the file NOTICE for conditions of use and distribution. */
/* Code for receiving a message and setting up spool files. */
static int data_fd = -1;
static uschar *spool_name = US"";
+enum CH_STATE {LF_SEEN, MID_LINE, CR_SEEN};
/*************************************************
{
uschar *qnewsender;
if (trusted_caller) return TRUE;
-if (newsender == NULL || untrusted_set_sender == NULL) return FALSE;
-qnewsender = (Ustrchr(newsender, '@') != NULL)?
- newsender : string_sprintf("%s@%s", newsender, qualify_domain_sender);
-return
- match_address_list(qnewsender, TRUE, TRUE, CUSS &untrusted_set_sender, NULL, -1,
- 0, NULL) == OK;
+if (!newsender || !untrusted_set_sender) return FALSE;
+qnewsender = Ustrchr(newsender, '@')
+ ? newsender : string_sprintf("%s@%s", newsender, qualify_domain_sender);
+return match_address_list_basic(qnewsender, CUSS &untrusted_set_sender, 0) == OK;
}
log_write(0, LOG_MAIN|LOG_PANIC, "cannot accept message: failed to stat "
"%s directory %s: %s", name, path, strerror(errno));
smtp_closedown(US"spool or log directory problem");
- exim_exit(EXIT_FAILURE);
+ exim_exit(EXIT_FAILURE, NULL);
}
*inodeptr = (statbuf.F_FILES > 0)? statbuf.F_FAVAIL : -1;
/* Exit from the program (non-BSMTP cases) */
-exim_exit(EXIT_FAILURE);
+exim_exit(EXIT_FAILURE, NULL);
}
{
message_size++;
if (fout != NULL && fputc('\n', fout) == EOF) return END_WERROR;
- (void) cutthrough_put_nl();
+ cutthrough_data_put_nl();
if (ch != '\r') ch_state = 1; else continue;
}
break;
if (ch == '.')
{
uschar c= ch;
- (void) cutthrough_puts(&c, 1);
+ cutthrough_data_puts(&c, 1);
}
ch_state = 1;
break;
message_size++;
body_linecount++;
if (fout != NULL && fputc('\n', fout) == EOF) return END_WERROR;
- (void) cutthrough_put_nl();
+ cutthrough_data_put_nl();
if (ch == '\r')
{
ch_state = 2;
if (message_size > thismessage_size_limit) return END_SIZE;
}
if(ch == '\n')
- (void) cutthrough_put_nl();
+ cutthrough_data_put_nl();
else
{
uschar c = ch;
- (void) cutthrough_puts(&c, 1);
+ cutthrough_data_puts(&c, 1);
}
}
/* Variant of the above read_message_data_smtp() specialised for RFC 3030
-CHUNKING. We assume that the incoming has proper CRLF, so only have to scan
-for and strip CR. On the downside there are more protocol reasons to stop.
+CHUNKING. Accept input lines separated by either CRLF or CR or LF and write
+LF-delimited spoolfile. Until we have wireformat spoolfiles, we need the
+body_linecount accounting for proper re-expansion for the wire, so use
+a cut-down version of the state-machine above; we don't need to do leading-dot
+detection and unstuffing.
Arguments:
- fout a FILE to which to write the message; NULL if skipping
+ fout a FILE to which to write the message; NULL if skipping;
+ must be open for both writing and reading.
Returns: One of the END_xxx values indicating why it stopped reading
*/
static int
read_message_bdat_smtp(FILE *fout)
{
+int linelength = 0, ch;
+enum CH_STATE ch_state = LF_SEEN;
+BOOL fix_nl = FALSE;
+
+for(;;)
+ {
+ switch ((ch = bdat_getc(GETC_BUFFER_UNLIMITED)))
+ {
+ case EOF: return END_EOF;
+ case ERR: return END_PROTOCOL;
+ case EOD:
+ /* Nothing to get from the sender anymore. We check the last
+ character written to the spool.
+
+ RFC 3030 states, that BDAT chunks are normal text, terminated by CRLF.
+ If we would be strict, we would refuse such broken messages.
+ But we are liberal, so we fix it. It would be easy just to append
+ the "\n" to the spool.
+
+ But there are some more things (line counting, message size calculation and such),
+ that would need to be duplicated here. So we simply do some ungetc
+ trickery.
+ */
+ if (fout)
+ {
+ if (fseek(fout, -1, SEEK_CUR) < 0) return END_PROTOCOL;
+ if (fgetc(fout) == '\n') return END_DOT;
+ }
+
+ if (linelength == -1) /* \r already seen (see below) */
+ {
+ DEBUG(D_receive) debug_printf("Add missing LF\n");
+ bdat_ungetc('\n');
+ continue;
+ }
+ DEBUG(D_receive) debug_printf("Add missing CRLF\n");
+ bdat_ungetc('\r'); /* not even \r was seen */
+ fix_nl = TRUE;
+
+ continue;
+ case '\0': body_zerocount++; break;
+ }
+ switch (ch_state)
+ {
+ case LF_SEEN: /* After LF or CRLF */
+ ch_state = MID_LINE;
+ /* fall through to handle as normal uschar. */
+
+ case MID_LINE: /* Mid-line state */
+ if (ch == '\n')
+ {
+ ch_state = LF_SEEN;
+ body_linecount++;
+ if (linelength > max_received_linelength)
+ max_received_linelength = linelength;
+ linelength = -1;
+ }
+ else if (ch == '\r')
+ {
+ ch_state = CR_SEEN;
+ if (fix_nl) bdat_ungetc('\n');
+ continue; /* don't write CR */
+ }
+ break;
+
+ case CR_SEEN: /* After (unwritten) CR */
+ body_linecount++;
+ if (linelength > max_received_linelength)
+ max_received_linelength = linelength;
+ linelength = -1;
+ if (ch == '\n')
+ ch_state = LF_SEEN;
+ else
+ {
+ message_size++;
+ if (fout && fputc('\n', fout) == EOF) return END_WERROR;
+ cutthrough_data_put_nl();
+ if (ch == '\r') continue; /* don't write CR */
+ ch_state = MID_LINE;
+ }
+ break;
+ }
+
+ /* Add the character to the spool file, unless skipping */
+
+ message_size++;
+ linelength++;
+ if (fout)
+ {
+ if (fputc(ch, fout) == EOF) return END_WERROR;
+ if (message_size > thismessage_size_limit) return END_SIZE;
+ }
+ if(ch == '\n')
+ cutthrough_data_put_nl();
+ else
+ {
+ uschar c = ch;
+ cutthrough_data_puts(&c, 1);
+ }
+ }
+/*NOTREACHED*/
+}
+
+static int
+read_message_bdat_smtp_wire(FILE *fout)
+{
int ch;
-int linelength = 0;
-for (;;) switch (ch = bdat_getc(GETC_BUFFER_UNLIMITED))
+/* Remember that this message uses wireformat. */
+
+DEBUG(D_receive) debug_printf("CHUNKING: %s\n",
+ fout ? "writing spoolfile in wire format" : "flushing input");
+spool_file_wireformat = TRUE;
+
+for (;;)
{
- case EOF: return END_EOF;
- case EOD: return END_DOT;
- case ERR: return END_PROTOCOL;
+ if (chunking_data_left > 0)
+ {
+ unsigned len = MAX(chunking_data_left, thismessage_size_limit - message_size + 1);
+ uschar * buf = bdat_getbuf(&len);
- case '\r':
- body_linecount++;
- if (linelength > max_received_linelength)
- max_received_linelength = linelength;
- linelength = -1;
- break;
+ message_size += len;
+ if (fout && fwrite(buf, len, 1, fout) != 1) return END_WERROR;
+ }
+ else switch (ch = bdat_getc(GETC_BUFFER_UNLIMITED))
+ {
+ case EOF: return END_EOF;
+ case EOD: return END_DOT;
+ case ERR: return END_PROTOCOL;
- case 0:
- body_zerocount++;
- /*FALLTHROUGH*/
- default:
- message_size++;
- linelength++;
- if (fout)
- {
- if (fputc(ch, fout) == EOF) return END_WERROR;
- if (message_size > thismessage_size_limit) return END_SIZE;
- }
-#ifdef notyet
- if(ch == '\n')
- (void) cutthrough_put_nl();
- else
- {
- uschar c = ch;
- (void) cutthrough_puts(&c, 1);
- }
-#endif
- break;
+ default:
+ message_size++;
+ /*XXX not done:
+ linelength
+ max_received_linelength
+ body_linecount
+ body_zerocount
+ */
+ if (fout && fputc(ch, fout) == EOF) return END_WERROR;
+ break;
+ }
+ if (message_size > thismessage_size_limit) return END_SIZE;
}
/*NOTREACHED*/
}
void
receive_swallow_smtp(void)
{
-/*XXX CHUNKING: not enough. read chunks until RSET? */
if (message_ended >= END_NOTENDED)
- message_ended = read_message_data_smtp(NULL);
+ message_ended = chunking_state <= CHUNKING_OFFERED
+ ? read_message_data_smtp(NULL)
+ : read_message_bdat_smtp_wire(NULL);
}
else
fprintf(stderr, "exim: %s%s\n", text2, text1); /* Sic */
(void)fclose(f);
-exim_exit(error_rc);
+exim_exit(error_rc, US"");
}
case ACL_WHERE_DKIM:
case ACL_WHERE_MIME:
case ACL_WHERE_DATA:
- if (cutthrough.fd >= 0 && (acl_removed_headers || acl_added_headers))
+ if ( cutthrough.fd >= 0 && cutthrough.delivery
+ && (acl_removed_headers || acl_added_headers))
{
log_write(0, LOG_MAIN|LOG_PANIC, "Header modification in data ACLs"
" will not take effect on cutthrough deliveries");
}
}
-if (acl_removed_headers != NULL)
+if (acl_removed_headers)
{
- DEBUG(D_receive|D_acl) debug_printf(">>Headers removed by %s ACL:\n", acl_name);
+ DEBUG(D_receive|D_acl) debug_printf_indent(">>Headers removed by %s ACL:\n", acl_name);
- for (h = header_list; h != NULL; h = h->next) if (h->type != htype_old)
+ for (h = header_list; h; h = h->next) if (h->type != htype_old)
{
const uschar * list = acl_removed_headers;
int sep = ':'; /* This is specified as a colon-separated list */
if (header_testname(h, s, Ustrlen(s), FALSE))
{
h->type = htype_old;
- DEBUG(D_receive|D_acl) debug_printf(" %s", h->text);
+ DEBUG(D_receive|D_acl) debug_printf_indent(" %s", h->text);
}
}
acl_removed_headers = NULL;
- DEBUG(D_receive|D_acl) debug_printf(">>\n");
+ DEBUG(D_receive|D_acl) debug_printf_indent(">>\n");
}
-if (acl_added_headers == NULL) return;
-DEBUG(D_receive|D_acl) debug_printf(">>Headers added by %s ACL:\n", acl_name);
+if (!acl_added_headers) return;
+DEBUG(D_receive|D_acl) debug_printf_indent(">>Headers added by %s ACL:\n", acl_name);
-for (h = acl_added_headers; h != NULL; h = next)
+for (h = acl_added_headers; h; h = next)
{
next = h->next;
switch(h->type)
{
case htype_add_top:
- h->next = header_list;
- header_list = h;
- DEBUG(D_receive|D_acl) debug_printf(" (at top)");
- break;
+ h->next = header_list;
+ header_list = h;
+ DEBUG(D_receive|D_acl) debug_printf_indent(" (at top)");
+ break;
case htype_add_rec:
- if (last_received == NULL)
- {
- last_received = header_list;
- while (!header_testname(last_received, US"Received", 8, FALSE))
- last_received = last_received->next;
- while (last_received->next != NULL &&
- header_testname(last_received->next, US"Received", 8, FALSE))
- last_received = last_received->next;
- }
- h->next = last_received->next;
- last_received->next = h;
- DEBUG(D_receive|D_acl) debug_printf(" (after Received:)");
- break;
+ if (!last_received)
+ {
+ last_received = header_list;
+ while (!header_testname(last_received, US"Received", 8, FALSE))
+ last_received = last_received->next;
+ while (last_received->next &&
+ header_testname(last_received->next, US"Received", 8, FALSE))
+ last_received = last_received->next;
+ }
+ h->next = last_received->next;
+ last_received->next = h;
+ DEBUG(D_receive|D_acl) debug_printf_indent(" (after Received:)");
+ break;
case htype_add_rfc:
- /* add header before any header which is NOT Received: or Resent- */
- last_received = header_list;
- while ( (last_received->next != NULL) &&
- ( (header_testname(last_received->next, US"Received", 8, FALSE)) ||
- (header_testname_incomplete(last_received->next, US"Resent-", 7, FALSE)) ) )
- last_received = last_received->next;
- /* last_received now points to the last Received: or Resent-* header
- in an uninterrupted chain of those header types (seen from the beginning
- of all headers. Our current header must follow it. */
- h->next = last_received->next;
- last_received->next = h;
- DEBUG(D_receive|D_acl) debug_printf(" (before any non-Received: or Resent-*: header)");
- break;
+ /* add header before any header which is NOT Received: or Resent- */
+ last_received = header_list;
+ while ( last_received->next &&
+ ( (header_testname(last_received->next, US"Received", 8, FALSE)) ||
+ (header_testname_incomplete(last_received->next, US"Resent-", 7, FALSE)) ) )
+ last_received = last_received->next;
+ /* last_received now points to the last Received: or Resent-* header
+ in an uninterrupted chain of those header types (seen from the beginning
+ of all headers. Our current header must follow it. */
+ h->next = last_received->next;
+ last_received->next = h;
+ DEBUG(D_receive|D_acl) debug_printf_indent(" (before any non-Received: or Resent-*: header)");
+ break;
default:
- h->next = NULL;
- header_last->next = h;
- break;
+ h->next = NULL;
+ header_last->next = h;
+ DEBUG(D_receive|D_acl) debug_printf_indent(" ");
+ break;
}
- if (h->next == NULL) header_last = h;
+ if (!h->next) header_last = h;
/* Check for one of the known header types (From:, To:, etc.) though in
practice most added headers are going to be "other". Lower case
h->type = header_checkname(h, FALSE);
if (h->type >= 'a') h->type = htype_other;
- DEBUG(D_receive|D_acl) debug_printf(" %s", header_last->text);
+ DEBUG(D_receive|D_acl) debug_printf("%s", h->text);
}
acl_added_headers = NULL;
-DEBUG(D_receive|D_acl) debug_printf(">>\n");
+DEBUG(D_receive|D_acl) debug_printf_indent(">>\n");
}
Arguments:
s the dynamic string
- sizeptr points to the size variable
- ptrptr points to the pointer variable
Returns: the extended string
*/
-static uschar *
-add_host_info_for_log(uschar * s, int * sizeptr, int * ptrptr)
+static gstring *
+add_host_info_for_log(gstring * g)
{
if (sender_fullhost)
{
if (LOGGING(dnssec) && sender_host_dnssec) /*XXX sender_helo_dnssec? */
- s = string_cat(s, sizeptr, ptrptr, US" DS");
- s = string_append(s, sizeptr, ptrptr, 2, US" H=", sender_fullhost);
+ g = string_catn(g, US" DS", 3);
+ g = string_append(g, 2, US" H=", sender_fullhost);
if (LOGGING(incoming_interface) && interface_address != NULL)
{
- s = string_cat(s, sizeptr, ptrptr,
+ g = string_cat(g,
string_sprintf(" I=[%s]:%d", interface_address, interface_port));
}
}
-if (sender_ident != NULL)
- s = string_append(s, sizeptr, ptrptr, 2, US" U=", sender_ident);
-if (received_protocol != NULL)
- s = string_append(s, sizeptr, ptrptr, 2, US" P=", received_protocol);
-return s;
+if (tcp_in_fastopen && !tcp_in_fastopen_logged)
+ {
+ g = string_catn(g, US" TFO", 4);
+ tcp_in_fastopen_logged = TRUE;
+ }
+if (sender_ident)
+ g = string_append(g, 2, US" U=", sender_ident);
+if (received_protocol)
+ g = string_append(g, 2, US" P=", received_protocol);
+return g;
}
uschar **blackholed_by_ptr)
{
FILE *mbox_file;
-uschar rfc822_file_path[2048];
+uschar * rfc822_file_path = NULL;
unsigned long mbox_size;
header_line *my_headerlist;
uschar *user_msg, *log_msg;
int mime_part_count_buffer = -1;
+uschar * mbox_filename;
int rc = OK;
-memset(CS rfc822_file_path,0,2048);
-
/* check if it is a MIME message */
-my_headerlist = header_list;
-while (my_headerlist != NULL)
- {
- /* skip deleted headers */
- if (my_headerlist->type == '*')
- {
- my_headerlist = my_headerlist->next;
- continue;
- }
- if (strncmpic(my_headerlist->text, US"Content-Type:", 13) == 0)
+
+for (my_headerlist = header_list; my_headerlist; my_headerlist = my_headerlist->next)
+ if ( my_headerlist->type != '*' /* skip deleted headers */
+ && strncmpic(my_headerlist->text, US"Content-Type:", 13) == 0
+ )
{
DEBUG(D_receive) debug_printf("Found Content-Type: header - executing acl_smtp_mime.\n");
goto DO_MIME_ACL;
}
- my_headerlist = my_headerlist->next;
- }
DEBUG(D_receive) debug_printf("No Content-Type: header - presumably not a MIME message.\n");
return TRUE;
DO_MIME_ACL:
+
/* make sure the eml mbox file is spooled up */
-mbox_file = spool_mbox(&mbox_size, NULL);
-if (mbox_file == NULL) {
- /* error while spooling */
+if (!(mbox_file = spool_mbox(&mbox_size, NULL, &mbox_filename)))
+ { /* error while spooling */
log_write(0, LOG_MAIN|LOG_PANIC,
"acl_smtp_mime: error while creating mbox spool file, message temporarily rejected.");
Uunlink(spool_name);
message_id[0] = 0; /* Indicate no message accepted */
*smtp_reply_ptr = US""; /* Indicate reply already sent */
return FALSE; /* Indicate skip to end of receive function */
-};
+ }
mime_is_rfc822 = 0;
rc = mime_acl_check(acl, mbox_file, NULL, &user_msg, &log_msg);
(void)fclose(mbox_file);
-if (Ustrlen(rfc822_file_path) > 0)
+if (rfc822_file_path)
{
mime_part_count = mime_part_count_buffer;
{
log_write(0, LOG_PANIC,
"acl_smtp_mime: can't unlink RFC822 spool file, skipping.");
- goto END_MIME_ACL;
+ goto END_MIME_ACL;
}
+ rfc822_file_path = NULL;
}
/* check if we must check any message/rfc822 attachments */
if (rc == OK)
{
- uschar temp_path[1024];
+ uschar * scandir = string_copyn(mbox_filename,
+ Ustrrchr(mbox_filename, '/') - mbox_filename);
struct dirent * entry;
DIR * tempdir;
- (void) string_format(temp_path, sizeof(temp_path), "%s/scan/%s",
- spool_directory, message_id);
-
- tempdir = opendir(CS temp_path);
- for (;;)
- {
- if (!(entry = readdir(tempdir)))
- break;
+ for (tempdir = opendir(CS scandir); entry = readdir(tempdir); )
if (strncmpic(US entry->d_name, US"__rfc822_", 9) == 0)
{
- (void) string_format(rfc822_file_path, sizeof(rfc822_file_path),
- "%s/scan/%s/%s", spool_directory, message_id, entry->d_name);
- debug_printf("RFC822 attachment detected: running MIME ACL for '%s'\n",
- rfc822_file_path);
+ rfc822_file_path = string_sprintf("%s/%s", scandir, entry->d_name);
+ DEBUG(D_receive)
+ debug_printf("RFC822 attachment detected: running MIME ACL for '%s'\n",
+ rfc822_file_path);
break;
}
- }
closedir(tempdir);
- if (entry)
+ if (rfc822_file_path)
{
if ((mbox_file = Ufopen(rfc822_file_path, "rb")))
{
#ifdef EXPERIMENTAL_DCC
dcc_ok = 0;
#endif
- if ( smtp_input
- && smtp_handle_acl_fail(ACL_WHERE_MIME, rc, user_msg, log_msg) != 0)
+ if (smtp_input)
{
- *smtp_yield_ptr = FALSE; /* No more messages after dropped connection */
+ if (smtp_handle_acl_fail(ACL_WHERE_MIME, rc, user_msg, log_msg) != 0)
+ *smtp_yield_ptr = FALSE; /* No more messages after dropped connection */
*smtp_reply_ptr = US""; /* Indicate reply already sent */
}
message_id[0] = 0; /* Indicate no message accepted */
int error_rc = (error_handling == ERRORS_SENDER)?
errors_sender_rc : EXIT_FAILURE;
int header_size = 256;
-int start, end, domain, size, sptr;
+int start, end, domain;
int id_resolution;
int had_zero = 0;
int prevlines_length = 0;
uschar *frozen_by = NULL;
uschar *queued_by = NULL;
-uschar *errmsg, *s;
+uschar *errmsg;
+gstring * g;
struct stat statbuf;
/* Final message to give to SMTP caller, and messages from ACLs */
cutthrough delivery with the no-spool option. It shouldn't be possible
to set up the combination, but just in case kill any ongoing connection. */
if (extract_recip || !smtp_input)
- cancel_cutthrough_connection("not smtp input");
+ cancel_cutthrough_connection(TRUE, US"not smtp input");
/* Initialize the chain of headers by setting up a place-holder for Received:
header. Temporarily mark it as "old", i.e. not to be used. We keep header_last
second, and for that we use the global variable received_time. This is for
things like ultimate message timeouts. */
-received_time = message_id_tv.tv_sec;
+received_time = message_id_tv;
/* If SMTP input, set the special handler for timeouts. The alarm() calls
happen in the smtp_getc() function when it refills its buffer. */
(and sometimes lunatic messages can have ones that are 100s of K long) we
call store_release() for strings that have been copied - if the string is at
the start of a block (and therefore the only thing in it, because we aren't
- doing any other gets), the block gets freed. We can only do this because we
- know there are no other calls to store_get() going on. */
+ doing any other gets), the block gets freed. We can only do this release if
+ there were no allocations since the once that we want to free. */
if (ptr >= header_size - 4)
{
/* header_size += 256; */
header_size *= 2;
if (!store_extend(next->text, oldsize, header_size))
- {
- uschar *newtext = store_get(header_size);
- memcpy(newtext, next->text, ptr);
- store_release(next->text);
- next->text = newtext;
- }
+ next->text = store_newblock(next->text, header_size, ptr);
}
/* Cope with receiving a binary zero. There is dispute about whether
prevent further reading), and break out of the loop, having freed the
empty header, and set next = NULL to indicate no data line. */
- if (ptr == 0 && ch == '.' && (smtp_input || dot_ends))
+ if (ptr == 0 && ch == '.' && dot_ends)
{
ch = (receive_getc)(GETC_BUFFER_UNLIMITED);
if (ch == '\r')
these lines in SMTP messages. There is now an option to ignore them from
specified hosts or networks. Sigh. */
- if (header_last == header_list &&
- (!smtp_input
- ||
- (sender_host_address != NULL &&
- verify_check_host(&ignore_fromline_hosts) == OK)
- ||
- (sender_host_address == NULL && ignore_fromline_local)
- ) &&
- regex_match_and_setup(regex_From, next->text, 0, -1))
+ if ( header_last == header_list
+ && ( !smtp_input
+ || ( sender_host_address
+ && verify_check_host(&ignore_fromline_hosts) == OK
+ )
+ || (!sender_host_address && ignore_fromline_local)
+ )
+ && regex_match_and_setup(regex_From, next->text, 0, -1)
+ )
{
if (!sender_address_forced)
{
uschar *uucp_sender = expand_string(uucp_from_sender);
- if (uucp_sender == NULL)
- {
+ if (!uucp_sender)
log_write(0, LOG_MAIN|LOG_PANIC,
"expansion of \"%s\" failed after matching "
"\"From \" line: %s", uucp_from_sender, expand_string_message);
- }
else
{
int start, end, domain;
uschar *errmess;
uschar *newsender = parse_extract_address(uucp_sender, &errmess,
&start, &end, &domain, TRUE);
- if (newsender != NULL)
+ if (newsender)
{
if (domain == 0 && newsender[0] != 0)
newsender = rewrite_address_qualify(newsender, FALSE);
}
else
- {
give_local_error(ERRMESS_VLONGHDRLINE,
string_sprintf("message header line longer than %d characters "
"received: message not accepted", header_line_maxsize), US"",
error_rc, stdin, header_list->next);
/* Does not return */
- }
}
/* Note if any resent- fields exist. */
}
}
+ /* Reject CHUNKING messages that do not CRLF their first header line */
+
+ if (!first_line_ended_crlf && chunking_state > CHUNKING_OFFERED)
+ {
+ log_write(L_size_reject, LOG_MAIN|LOG_REJECT, "rejected from <%s>%s%s%s%s: "
+ "Non-CRLF-terminated header, under CHUNKING: message abandoned",
+ sender_address,
+ sender_fullhost ? " H=" : "", sender_fullhost ? sender_fullhost : US"",
+ sender_ident ? " U=" : "", sender_ident ? sender_ident : US"");
+ smtp_printf("552 Message header not CRLF terminated\r\n", FALSE);
+ bdat_flush_data();
+ smtp_reply = US"";
+ goto TIDYUP; /* Skip to end of function */
+ }
+
/* The line has been handled. If we have hit EOF, break out of the loop,
indicating no pending data line. */
DEBUG(D_receive)
{
debug_printf(">>Headers received:\n");
- for (h = header_list->next; h != NULL; h = h->next)
+ for (h = header_list->next; h; h = h->next)
debug_printf("%s", h->text);
debug_printf("\n");
}
/* Scan the headers to identify them. Some are merely marked for later
processing; some are dealt with here. */
-for (h = header_list->next; h != NULL; h = h->next)
+for (h = header_list->next; h; h = h->next)
{
BOOL is_resent = strncmpic(h->text, US"resent-", 7) == 0;
if (is_resent) contains_resent_headers = TRUE;
switch (header_checkname(h, is_resent))
{
case htype_bcc:
- h->type = htype_bcc; /* Both Bcc: and Resent-Bcc: */
- break;
+ h->type = htype_bcc; /* Both Bcc: and Resent-Bcc: */
+ break;
case htype_cc:
- h->type = htype_cc; /* Both Cc: and Resent-Cc: */
- break;
+ h->type = htype_cc; /* Both Cc: and Resent-Cc: */
+ break;
- /* Record whether a Date: or Resent-Date: header exists, as appropriate. */
+ /* Record whether a Date: or Resent-Date: header exists, as appropriate. */
case htype_date:
- if (!resents_exist || is_resent) date_header_exists = TRUE;
- break;
+ if (!resents_exist || is_resent) date_header_exists = TRUE;
+ break;
- /* Same comments as about Return-Path: below. */
+ /* Same comments as about Return-Path: below. */
case htype_delivery_date:
- if (delivery_date_remove) h->type = htype_old;
- break;
+ if (delivery_date_remove) h->type = htype_old;
+ break;
- /* Same comments as about Return-Path: below. */
+ /* Same comments as about Return-Path: below. */
case htype_envelope_to:
- if (envelope_to_remove) h->type = htype_old;
- break;
+ if (envelope_to_remove) h->type = htype_old;
+ break;
- /* Mark all "From:" headers so they get rewritten. Save the one that is to
- be used for Sender: checking. For Sendmail compatibility, if the "From:"
- header consists of just the login id of the user who called Exim, rewrite
- it with the gecos field first. Apply this rule to Resent-From: if there
- are resent- fields. */
+ /* Mark all "From:" headers so they get rewritten. Save the one that is to
+ be used for Sender: checking. For Sendmail compatibility, if the "From:"
+ header consists of just the login id of the user who called Exim, rewrite
+ it with the gecos field first. Apply this rule to Resent-From: if there
+ are resent- fields. */
case htype_from:
- h->type = htype_from;
- if (!resents_exist || is_resent)
- {
- from_header = h;
- if (!smtp_input)
- {
- int len;
- uschar *s = Ustrchr(h->text, ':') + 1;
- while (isspace(*s)) s++;
- len = h->slen - (s - h->text) - 1;
- if (Ustrlen(originator_login) == len &&
- strncmpic(s, originator_login, len) == 0)
- {
- uschar *name = is_resent? US"Resent-From" : US"From";
- header_add(htype_from, "%s: %s <%s@%s>\n", name, originator_name,
- originator_login, qualify_domain_sender);
- from_header = header_last;
- h->type = htype_old;
- DEBUG(D_receive|D_rewrite)
- debug_printf("rewrote \"%s:\" header using gecos\n", name);
- }
- }
- }
- break;
+ h->type = htype_from;
+ if (!resents_exist || is_resent)
+ {
+ from_header = h;
+ if (!smtp_input)
+ {
+ int len;
+ uschar *s = Ustrchr(h->text, ':') + 1;
+ while (isspace(*s)) s++;
+ len = h->slen - (s - h->text) - 1;
+ if (Ustrlen(originator_login) == len &&
+ strncmpic(s, originator_login, len) == 0)
+ {
+ uschar *name = is_resent? US"Resent-From" : US"From";
+ header_add(htype_from, "%s: %s <%s@%s>\n", name, originator_name,
+ originator_login, qualify_domain_sender);
+ from_header = header_last;
+ h->type = htype_old;
+ DEBUG(D_receive|D_rewrite)
+ debug_printf("rewrote \"%s:\" header using gecos\n", name);
+ }
+ }
+ }
+ break;
- /* Identify the Message-id: header for generating "in-reply-to" in the
- autoreply transport. For incoming logging, save any resent- value. In both
- cases, take just the first of any multiples. */
+ /* Identify the Message-id: header for generating "in-reply-to" in the
+ autoreply transport. For incoming logging, save any resent- value. In both
+ cases, take just the first of any multiples. */
case htype_id:
- if (msgid_header == NULL && (!resents_exist || is_resent))
- {
- msgid_header = h;
- h->type = htype_id;
- }
- break;
+ if (!msgid_header && (!resents_exist || is_resent))
+ {
+ msgid_header = h;
+ h->type = htype_id;
+ }
+ break;
- /* Flag all Received: headers */
+ /* Flag all Received: headers */
case htype_received:
- h->type = htype_received;
- received_count++;
- break;
+ h->type = htype_received;
+ received_count++;
+ break;
- /* "Reply-to:" is just noted (there is no resent-reply-to field) */
+ /* "Reply-to:" is just noted (there is no resent-reply-to field) */
case htype_reply_to:
- h->type = htype_reply_to;
- break;
+ h->type = htype_reply_to;
+ break;
- /* The Return-path: header is supposed to be added to messages when
- they leave the SMTP system. We shouldn't receive messages that already
- contain Return-path. However, since Exim generates Return-path: on
- local delivery, resent messages may well contain it. We therefore
- provide an option (which defaults on) to remove any Return-path: headers
- on input. Removal actually means flagging as "old", which prevents the
- header being transmitted with the message. */
+ /* The Return-path: header is supposed to be added to messages when
+ they leave the SMTP system. We shouldn't receive messages that already
+ contain Return-path. However, since Exim generates Return-path: on
+ local delivery, resent messages may well contain it. We therefore
+ provide an option (which defaults on) to remove any Return-path: headers
+ on input. Removal actually means flagging as "old", which prevents the
+ header being transmitted with the message. */
case htype_return_path:
- if (return_path_remove) h->type = htype_old;
+ if (return_path_remove) h->type = htype_old;
- /* If we are testing a mail filter file, use the value of the
- Return-Path: header to set up the return_path variable, which is not
- otherwise set. However, remove any <> that surround the address
- because the variable doesn't have these. */
+ /* If we are testing a mail filter file, use the value of the
+ Return-Path: header to set up the return_path variable, which is not
+ otherwise set. However, remove any <> that surround the address
+ because the variable doesn't have these. */
- if (filter_test != FTEST_NONE)
- {
- uschar *start = h->text + 12;
- uschar *end = start + Ustrlen(start);
- while (isspace(*start)) start++;
- while (end > start && isspace(end[-1])) end--;
- if (*start == '<' && end[-1] == '>')
- {
- start++;
- end--;
- }
- return_path = string_copyn(start, end - start);
- printf("Return-path taken from \"Return-path:\" header line\n");
- }
- break;
+ if (filter_test != FTEST_NONE)
+ {
+ uschar *start = h->text + 12;
+ uschar *end = start + Ustrlen(start);
+ while (isspace(*start)) start++;
+ while (end > start && isspace(end[-1])) end--;
+ if (*start == '<' && end[-1] == '>')
+ {
+ start++;
+ end--;
+ }
+ return_path = string_copyn(start, end - start);
+ printf("Return-path taken from \"Return-path:\" header line\n");
+ }
+ break;
/* If there is a "Sender:" header and the message is locally originated,
and from an untrusted caller and suppress_local_fixups is not set, or if we
set.) */
case htype_sender:
- h->type = ((!active_local_sender_retain &&
- (
- (sender_local && !trusted_caller && !suppress_local_fixups)
- || submission_mode
- )
- ) &&
- (!resents_exist||is_resent))?
- htype_old : htype_sender;
- break;
+ h->type = !active_local_sender_retain
+ && ( sender_local && !trusted_caller && !suppress_local_fixups
+ || submission_mode
+ )
+ && (!resents_exist || is_resent)
+ ? htype_old : htype_sender;
+ break;
- /* Remember the Subject: header for logging. There is no Resent-Subject */
+ /* Remember the Subject: header for logging. There is no Resent-Subject */
case htype_subject:
- subject_header = h;
- break;
+ subject_header = h;
+ break;
- /* "To:" gets flagged, and the existence of a recipient header is noted,
- whether it's resent- or not. */
+ /* "To:" gets flagged, and the existence of a recipient header is noted,
+ whether it's resent- or not. */
case htype_to:
- h->type = htype_to;
- /****
- to_or_cc_header_exists = TRUE;
- ****/
- break;
+ h->type = htype_to;
+ /****
+ to_or_cc_header_exists = TRUE;
+ ****/
+ break;
}
}
/* Now scan the headers */
- for (h = header_list->next; h != NULL; h = h->next)
+ for (h = header_list->next; h; h = h->next)
{
if ((h->type == htype_to || h->type == htype_cc || h->type == htype_bcc) &&
(!contains_resent_headers || strncmpic(h->text, US"resent-", 7) == 0))
NOTE: If ever the format of message ids is changed, the regular expression for
checking that a string is in this format must be updated in a corresponding
way. It appears in the initializing code in exim.c. The macro MESSAGE_ID_LENGTH
-must also be changed to reflect the correct string length. Then, of course,
-other programs that rely on the message id format will need updating too. */
+must also be changed to reflect the correct string length. The queue-sort code
+needs to know the layout. Then, of course, other programs that rely on the
+message id format will need updating too. */
Ustrncpy(message_id, string_base62((long int)(message_id_tv.tv_sec)), 6);
message_id[6] = '-';
left in id_resolution so that an appropriate wait can be done after receiving
the message, if necessary (we hope it won't be). */
-if (host_number_string != NULL)
+if (host_number_string)
{
id_resolution = (BASE_62 == 62)? 5000 : 10000;
sprintf(CS(message_id + MESSAGE_ID_LENGTH - 3), "-%2s",
messages. This can be user-configured if required, but we had better flatten
any illegal characters therein. */
-if (msgid_header == NULL &&
- ((sender_host_address == NULL && !suppress_local_fixups)
- || submission_mode))
+if ( !msgid_header
+ && ((!sender_host_address && !suppress_local_fixups) || submission_mode))
{
uschar *p;
uschar *id_text = US"";
/* Permit only letters, digits, dots, and hyphens in the domain */
- if (message_id_domain != NULL)
+ if (message_id_domain)
{
uschar *new_id_domain = expand_string(message_id_domain);
- if (new_id_domain == NULL)
+ if (!new_id_domain)
{
if (!expand_string_forcedfail)
log_write(0, LOG_MAIN|LOG_PANIC,
"expansion of \"%s\" (message_id_header_domain) "
"failed: %s", message_id_domain, expand_string_message);
}
- else if (*new_id_domain != 0)
+ else if (*new_id_domain)
{
id_domain = new_id_domain;
- for (p = id_domain; *p != 0; p++)
+ for (p = id_domain; *p; p++)
if (!isalnum(*p) && *p != '.') *p = '-'; /* No need to test '-' ! */
}
}
/* Permit all characters except controls and RFC 2822 specials in the
additional text part. */
- if (message_id_text != NULL)
+ if (message_id_text)
{
uschar *new_id_text = expand_string(message_id_text);
- if (new_id_text == NULL)
+ if (!new_id_text)
{
if (!expand_string_forcedfail)
log_write(0, LOG_MAIN|LOG_PANIC,
"expansion of \"%s\" (message_id_header_text) "
"failed: %s", message_id_text, expand_string_message);
}
- else if (*new_id_text != 0)
+ else if (*new_id_text)
{
id_text = new_id_text;
- for (p = id_text; *p != 0; p++)
- if (mac_iscntrl_or_special(*p)) *p = '-';
+ for (p = id_text; *p; p++) if (mac_iscntrl_or_special(*p)) *p = '-';
}
}
untrusted user to set anything in the envelope (which might then get info
From:) but we still want to ensure a valid Sender: if it is required. */
-if (from_header == NULL &&
- ((sender_host_address == NULL && !suppress_local_fixups)
- || submission_mode))
+if ( !from_header
+ && ((!sender_host_address && !suppress_local_fixups) || submission_mode))
{
uschar *oname = US"";
force its value or if we have a non-SMTP message for which -f was not used
to set the sender. */
- if (sender_host_address == NULL)
+ if (!sender_host_address)
{
if (!trusted_caller || sender_name_forced ||
(!smtp_input && !sender_address_forced))
/* For non-locally submitted messages, the only time we use the originator
name is when it was forced by the /name= option on control=submission. */
- else
- {
- if (submission_name != NULL) oname = submission_name;
- }
+ else if (submission_name) oname = submission_name;
/* Envelope sender is empty */
- if (sender_address[0] == 0)
+ if (!*sender_address)
{
uschar *fromstart, *fromend;
- fromstart = string_sprintf("%sFrom: %s%s", resent_prefix,
- oname, (oname[0] == 0)? "" : " <");
- fromend = (oname[0] == 0)? US"" : US">";
+ fromstart = string_sprintf("%sFrom: %s%s",
+ resent_prefix, oname, *oname ? " <" : "");
+ fromend = *oname ? US">" : US"";
if (sender_local || local_error_message)
- {
header_add(htype_from, "%s%s@%s%s\n", fromstart,
local_part_quote(originator_login), qualify_domain_sender,
fromend);
- }
- else if (submission_mode && authenticated_id != NULL)
+
+ else if (submission_mode && authenticated_id)
{
- if (submission_domain == NULL)
- {
+ if (!submission_domain)
header_add(htype_from, "%s%s@%s%s\n", fromstart,
local_part_quote(authenticated_id), qualify_domain_sender,
fromend);
- }
- else if (submission_domain[0] == 0) /* empty => whole address set */
- {
+
+ else if (!*submission_domain) /* empty => whole address set */
header_add(htype_from, "%s%s%s\n", fromstart, authenticated_id,
fromend);
- }
+
else
- {
header_add(htype_from, "%s%s@%s%s\n", fromstart,
- local_part_quote(authenticated_id), submission_domain,
- fromend);
- }
+ local_part_quote(authenticated_id), submission_domain, fromend);
+
from_header = header_last; /* To get it checked for Sender: */
}
}
{
header_add(htype_from, "%sFrom: %s%s%s%s\n", resent_prefix,
oname,
- (oname[0] == 0)? "" : " <",
- (sender_address_unrewritten == NULL)?
- sender_address : sender_address_unrewritten,
- (oname[0] == 0)? "" : ">");
+ *oname ? " <" : "",
+ sender_address_unrewritten ? sender_address_unrewritten : sender_address,
+ *oname ? ">" : "");
from_header = header_last; /* To get it checked for Sender: */
}
here. If the From: header contains more than one address, then the call to
parse_extract_address fails, and a Sender: header is inserted, as required. */
-if (from_header != NULL &&
- (active_local_from_check &&
- ((sender_local && !trusted_caller && !suppress_local_fixups) ||
- (submission_mode && authenticated_id != NULL))
- ))
+if ( from_header
+ && ( active_local_from_check
+ && ( sender_local && !trusted_caller && !suppress_local_fixups
+ || submission_mode && authenticated_id
+ ) ) )
{
BOOL make_sender = TRUE;
int start, end, domain;
&start, &end, &domain, FALSE);
uschar *generated_sender_address;
- if (submission_mode)
- {
- if (submission_domain == NULL)
- {
- generated_sender_address = string_sprintf("%s@%s",
- local_part_quote(authenticated_id), qualify_domain_sender);
- }
- else if (submission_domain[0] == 0) /* empty => full address */
- {
- generated_sender_address = string_sprintf("%s",
- authenticated_id);
- }
- else
- {
- generated_sender_address = string_sprintf("%s@%s",
- local_part_quote(authenticated_id), submission_domain);
- }
- }
- else
- generated_sender_address = string_sprintf("%s@%s",
- local_part_quote(originator_login), qualify_domain_sender);
+ generated_sender_address = submission_mode
+ ? !submission_domain
+ ? string_sprintf("%s@%s",
+ local_part_quote(authenticated_id), qualify_domain_sender)
+ : !*submission_domain /* empty => full address */
+ ? string_sprintf("%s", authenticated_id)
+ : string_sprintf("%s@%s",
+ local_part_quote(authenticated_id), submission_domain)
+ : string_sprintf("%s@%s",
+ local_part_quote(originator_login), qualify_domain_sender);
/* Remove permitted prefixes and suffixes from the local part of the From:
address before doing the comparison with the generated sender. */
- if (from_address != NULL)
+ if (from_address)
{
int slen;
- uschar *at = (domain == 0)? NULL : from_address + domain - 1;
+ uschar *at = domain ? from_address + domain - 1 : NULL;
- if (at != NULL) *at = 0;
+ if (at) *at = 0;
from_address += route_check_prefix(from_address, local_from_prefix);
slen = route_check_suffix(from_address, local_from_suffix);
if (slen > 0)
memmove(from_address+slen, from_address, Ustrlen(from_address)-slen);
from_address += slen;
}
- if (at != NULL) *at = '@';
+ if (at) *at = '@';
- if (strcmpic(generated_sender_address, from_address) == 0 ||
- (domain == 0 && strcmpic(from_address, originator_login) == 0))
+ if ( strcmpic(generated_sender_address, from_address) == 0
+ || (!domain && strcmpic(from_address, originator_login) == 0))
make_sender = FALSE;
}
appropriate rewriting rules. */
if (make_sender)
- {
- if (submission_mode && submission_name == NULL)
+ if (submission_mode && !submission_name)
header_add(htype_sender, "%sSender: %s\n", resent_prefix,
generated_sender_address);
else
resent_prefix,
submission_mode? submission_name : originator_name,
generated_sender_address);
- }
/* Ensure that a non-null envelope sender address corresponds to the
submission mode sender address. */
- if (submission_mode && sender_address[0] != 0)
+ if (submission_mode && *sender_address)
{
- if (sender_address_unrewritten == NULL)
+ if (!sender_address_unrewritten)
sender_address_unrewritten = sender_address;
sender_address = generated_sender_address;
if (Ustrcmp(sender_address_unrewritten, generated_sender_address) != 0)
/* If there are any rewriting rules, apply them to the sender address, unless
it has already been rewritten as part of verification for SMTP input. */
-if (global_rewrite_rules != NULL && sender_address_unrewritten == NULL &&
- sender_address[0] != 0)
+if (global_rewrite_rules && !sender_address_unrewritten && *sender_address)
{
sender_address = rewrite_address(sender_address, FALSE, TRUE,
global_rewrite_rules, rewrite_existflags);
documented as happening *after* recipient addresses are taken from the headers
by the -t command line option. An added Sender: gets rewritten here. */
-for (h = header_list->next; h != NULL; h = h->next)
+for (h = header_list->next; h; h = h->next)
{
header_line *newh = rewrite_header(h, NULL, NULL, global_rewrite_rules,
rewrite_existflags, TRUE);
- if (newh != NULL) h = newh;
+ if (newh) h = newh;
}
As per Message-Id, we prepend if resending, else append.
*/
-if (!date_header_exists &&
- ((sender_host_address == NULL && !suppress_local_fixups)
- || submission_mode))
+if ( !date_header_exists
+ && ((!sender_host_address && !suppress_local_fixups) || submission_mode))
header_add_at_position(!resents_exist, NULL, FALSE, htype_other,
"%sDate: %s\n", resent_prefix, tod_stamp(tod_full));
DEBUG(D_receive)
{
debug_printf(">>Headers after rewriting and local additions:\n");
- for (h = header_list->next; h != NULL; h = h->next)
+ for (h = header_list->next; h; h = h->next)
debug_printf("%c %s", h->type, h->text);
debug_printf("\n");
}
Could we do onward CHUNKING given inbound CHUNKING?
*/
if (chunking_state > CHUNKING_OFFERED)
- cancel_cutthrough_connection("chunking active");
+ cancel_cutthrough_connection(FALSE, US"chunking active");
/* Cutthrough delivery:
We have to create the Received header now rather than at the end of reception,
so the timestamp behaviour is a change to the normal case.
-XXX Ensure this gets documented XXX.
Having created it, send the headers to the destination. */
-if (cutthrough.fd >= 0)
+
+if (cutthrough.fd >= 0 && cutthrough.delivery)
{
if (received_count > received_headers_max)
{
- cancel_cutthrough_connection("too many headers");
+ cancel_cutthrough_connection(TRUE, US"too many headers");
if (smtp_input) receive_swallow_smtp(); /* Swallow incoming SMTP */
log_write(0, LOG_MAIN|LOG_REJECT, "rejected from <%s>%s%s%s%s: "
"Too many \"Received\" headers",
sender_address,
- (sender_fullhost == NULL)? "" : " H=",
- (sender_fullhost == NULL)? US"" : sender_fullhost,
- (sender_ident == NULL)? "" : " U=",
- (sender_ident == NULL)? US"" : sender_ident);
+ sender_fullhost ? "H=" : "", sender_fullhost ? sender_fullhost : US"",
+ sender_ident ? "U=" : "", sender_ident ? sender_ident : US"");
message_id[0] = 0; /* Indicate no message accepted */
smtp_reply = US"550 Too many \"Received\" headers - suspected mail loop";
goto TIDYUP; /* Skip to end of function */
of fwrite() isn't inspected; instead we call ferror() below. */
fprintf(data_file, "%s-D\n", message_id);
-if (next != NULL)
+if (next)
{
uschar *s = next->text;
int len = next->slen;
{
if (smtp_input)
{
- message_ended = chunking_state > CHUNKING_OFFERED
- ? read_message_bdat_smtp(data_file)
- : read_message_data_smtp(data_file);
+ message_ended = chunking_state <= CHUNKING_OFFERED
+ ? read_message_data_smtp(data_file)
+ : spool_wireformat
+ ? read_message_bdat_smtp_wire(data_file)
+ : read_message_bdat_smtp(data_file);
receive_linecount++; /* The terminating "." line */
}
else message_ended = read_message_data(data_file);
if (smtp_input)
{
Uunlink(spool_name); /* Lose data file when closed */
- cancel_cutthrough_connection("sender closed connection");
+ cancel_cutthrough_connection(TRUE, US"sender closed connection");
message_id[0] = 0; /* Indicate no message accepted */
smtp_reply = handle_lost_connection(US"");
smtp_yield = FALSE;
case END_SIZE:
Uunlink(spool_name); /* Lose the data file when closed */
- cancel_cutthrough_connection("mail too big");
+ cancel_cutthrough_connection(TRUE, US"mail too big");
if (smtp_input) receive_swallow_smtp(); /* Swallow incoming SMTP */
log_write(L_size_reject, LOG_MAIN|LOG_REJECT, "rejected from <%s>%s%s%s%s: "
"message too big: read=%d max=%d",
sender_address,
- (sender_fullhost == NULL)? "" : " H=",
- (sender_fullhost == NULL)? US"" : sender_fullhost,
- (sender_ident == NULL)? "" : " U=",
- (sender_ident == NULL)? US"" : sender_ident,
+ sender_fullhost ? " H=" : "",
+ sender_fullhost ? sender_fullhost : US"",
+ sender_ident ? " U=" : "",
+ sender_ident ? sender_ident : US"",
message_size,
thismessage_size_limit);
case END_PROTOCOL:
Uunlink(spool_name); /* Lose the data file when closed */
- cancel_cutthrough_connection("sender protocol error");
+ cancel_cutthrough_connection(TRUE, US"sender protocol error");
smtp_reply = US""; /* Response already sent */
message_id[0] = 0; /* Indicate no message accepted */
goto TIDYUP; /* Skip to end of function */
uschar *msg = string_sprintf("%s error (%s) while receiving message from %s",
input_error? "Input read" : "Spool write",
msg_errno,
- (sender_fullhost != NULL)? sender_fullhost : sender_ident);
+ sender_fullhost ? sender_fullhost : sender_ident);
log_write(0, LOG_MAIN, "Message abandoned: %s", msg);
Uunlink(spool_name); /* Lose the data file */
- cancel_cutthrough_connection("error writing spoolfile");
+ cancel_cutthrough_connection(TRUE, US"error writing spoolfile");
if (smtp_input)
{
/* No I/O errors were encountered while writing the data file. */
DEBUG(D_receive) debug_printf("Data file written for message %s\n", message_id);
+if (LOGGING(receive_time)) timesince(&received_time_taken, &received_time);
/* If there were any bad addresses extracted by -t, or there were no recipients
exit. (This can't be SMTP, which always ensures there's at least one
syntactically good recipient address.) */
-if (extract_recip && (bad_addresses != NULL || recipients_count == 0))
+if (extract_recip && (bad_addresses || recipients_count == 0))
{
DEBUG(D_receive)
{
if (recipients_count == 0) debug_printf("*** No recipients\n");
- if (bad_addresses != NULL)
+ if (bad_addresses)
{
error_block *eblock = bad_addresses;
debug_printf("*** Bad address(es)\n");
}
else
{
- if (bad_addresses == NULL)
+ if (!bad_addresses)
{
if (extracted_ignored)
fprintf(stderr, "exim: all -t recipients overridden by command line\n");
{
Uunlink(spool_name);
(void)fclose(data_file);
- exim_exit(error_rc);
+ exim_exit(error_rc, US"receiving");
}
}
code. */
/*XXX eventually add excess Received: check for cutthrough case back when classifying them */
-if (received_header->text == NULL) /* Non-cutthrough case */
+if (!received_header->text) /* Non-cutthrough case */
{
received_header_gen();
#ifndef DISABLE_DKIM
if (!dkim_disable_verify)
{
- /* Finish verification, this will log individual signature results to
- the mainlog */
+ /* Finish verification */
dkim_exim_verify_finish();
/* Check if we must run the DKIM ACL */
if (acl_smtp_dkim && dkim_verify_signers && *dkim_verify_signers)
{
- uschar *dkim_verify_signers_expanded =
+ uschar * dkim_verify_signers_expanded =
expand_string(dkim_verify_signers);
- if (!dkim_verify_signers_expanded)
+ gstring * results = NULL;
+ int signer_sep = 0;
+ const uschar * ptr;
+ uschar * item;
+ gstring * seen_items = NULL;
+ int old_pool = store_pool;
+
+ store_pool = POOL_PERM; /* Allow created variables to live to data ACL */
+
+ if (!(ptr = dkim_verify_signers_expanded))
log_write(0, LOG_MAIN|LOG_PANIC,
"expansion of dkim_verify_signers option failed: %s",
expand_string_message);
- else
- {
- int sep = 0;
- const uschar *ptr = dkim_verify_signers_expanded;
- uschar *item = NULL;
- uschar *seen_items = NULL;
- int seen_items_size = 0;
- int seen_items_offset = 0;
- /* Default to OK when no items are present */
- rc = OK;
- while ((item = string_nextinlist(&ptr, &sep, NULL, 0)))
- {
- /* Prevent running ACL for an empty item */
- if (!item || !*item) continue;
-
- /* Only run ACL once for each domain or identity,
- no matter how often it appears in the expanded list. */
- if (seen_items)
- {
- uschar *seen_item = NULL;
- const uschar *seen_items_list = seen_items;
- BOOL seen_this_item = FALSE;
-
- while ((seen_item = string_nextinlist(&seen_items_list, &sep,
- NULL, 0)))
- if (Ustrcmp(seen_item,item) == 0)
- {
- seen_this_item = TRUE;
- break;
- }
-
- if (seen_this_item)
- {
- DEBUG(D_receive)
- debug_printf("acl_smtp_dkim: skipping signer %s, "
- "already seen\n", item);
- continue;
- }
-
- seen_items = string_append(seen_items, &seen_items_size,
- &seen_items_offset, 1, ":");
- }
-
- seen_items = string_append(seen_items, &seen_items_size,
- &seen_items_offset, 1, item);
- seen_items[seen_items_offset] = '\0';
-
- DEBUG(D_receive)
- debug_printf("calling acl_smtp_dkim for dkim_cur_signer=%s\n",
- item);
-
- dkim_exim_acl_setup(item);
- rc = acl_check(ACL_WHERE_DKIM, NULL, acl_smtp_dkim,
- &user_msg, &log_msg);
-
- if (rc != OK)
+ /* Default to OK when no items are present */
+ rc = OK;
+ while ((item = string_nextinlist(&ptr, &signer_sep, NULL, 0)))
+ {
+ /* Prevent running ACL for an empty item */
+ if (!item || !*item) continue;
+
+ /* Only run ACL once for each domain or identity,
+ no matter how often it appears in the expanded list. */
+ if (seen_items)
+ {
+ uschar * seen_item;
+ const uschar * seen_items_list = string_from_gstring(seen_items);
+ int seen_sep = ':';
+ BOOL seen_this_item = FALSE;
+
+ while ((seen_item = string_nextinlist(&seen_items_list, &seen_sep,
+ NULL, 0)))
+ if (Ustrcmp(seen_item,item) == 0)
+ {
+ seen_this_item = TRUE;
+ break;
+ }
+
+ if (seen_this_item)
{
DEBUG(D_receive)
- debug_printf("acl_smtp_dkim: acl_check returned %d on %s, "
- "skipping remaining items\n", rc, item);
- cancel_cutthrough_connection("dkim acl not ok");
- break;
+ debug_printf("acl_smtp_dkim: skipping signer %s, "
+ "already seen\n", item);
+ continue;
}
- }
- add_acl_headers(ACL_WHERE_DKIM, US"DKIM");
- if (rc == DISCARD)
- {
- recipients_count = 0;
- blackholed_by = US"DKIM ACL";
- if (log_msg != NULL)
- blackhole_log_msg = string_sprintf(": %s", log_msg);
- }
- else if (rc != OK)
- {
- Uunlink(spool_name);
- if (smtp_handle_acl_fail(ACL_WHERE_DKIM, rc, user_msg, log_msg) != 0)
- smtp_yield = FALSE; /* No more messages after dropped connection */
- smtp_reply = US""; /* Indicate reply already sent */
- message_id[0] = 0; /* Indicate no message accepted */
- goto TIDYUP; /* Skip to end of function */
- }
- }
+
+ seen_items = string_catn(seen_items, US":", 1);
+ }
+ seen_items = string_cat(seen_items, item);
+
+ rc = dkim_exim_acl_run(item, &results, &user_msg, &log_msg);
+ if (rc != OK)
+ {
+ DEBUG(D_receive)
+ debug_printf("acl_smtp_dkim: acl_check returned %d on %s, "
+ "skipping remaining items\n", rc, item);
+ cancel_cutthrough_connection(TRUE, US"dkim acl not ok");
+ break;
+ }
+ }
+ dkim_verify_status = string_from_gstring(results);
+ store_pool = old_pool;
+ add_acl_headers(ACL_WHERE_DKIM, US"DKIM");
+ if (rc == DISCARD)
+ {
+ recipients_count = 0;
+ blackholed_by = US"DKIM ACL";
+ if (log_msg)
+ blackhole_log_msg = string_sprintf(": %s", log_msg);
+ }
+ else if (rc != OK)
+ {
+ Uunlink(spool_name);
+ if (smtp_handle_acl_fail(ACL_WHERE_DKIM, rc, user_msg, log_msg) != 0)
+ smtp_yield = FALSE; /* No more messages after dropped connection */
+ smtp_reply = US""; /* Indicate reply already sent */
+ message_id[0] = 0; /* Indicate no message accepted */
+ goto TIDYUP; /* Skip to end of function */
+ }
}
+ else
+ dkim_exim_verify_log_all();
}
#endif /* DISABLE_DKIM */
#ifdef WITH_CONTENT_SCAN
- if (recipients_count > 0 &&
- acl_smtp_mime != NULL &&
- !run_mime_acl(acl_smtp_mime, &smtp_yield, &smtp_reply, &blackholed_by))
+ if ( recipients_count > 0
+ && acl_smtp_mime
+ && !run_mime_acl(acl_smtp_mime, &smtp_yield, &smtp_reply, &blackholed_by)
+ )
goto TIDYUP;
#endif /* WITH_CONTENT_SCAN */
int all_pass = OK;
int all_fail = FAIL;
- smtp_printf("353 PRDR content analysis beginning\r\n");
+ smtp_printf("353 PRDR content analysis beginning\r\n", TRUE);
/* Loop through recipients, responses must be in same order received */
for (c = 0; recipients_count > c; c++)
{
{
recipients_count = 0;
blackholed_by = US"DATA ACL";
- if (log_msg != NULL)
+ if (log_msg)
blackhole_log_msg = string_sprintf(": %s", log_msg);
- cancel_cutthrough_connection("data acl discard");
+ cancel_cutthrough_connection(TRUE, US"data acl discard");
}
else if (rc != OK)
{
Uunlink(spool_name);
- cancel_cutthrough_connection("data acl not ok");
+ cancel_cutthrough_connection(TRUE, US"data acl not ok");
#ifdef WITH_CONTENT_SCAN
unspool_mbox();
#endif
{
#ifdef WITH_CONTENT_SCAN
- if (acl_not_smtp_mime != NULL &&
- !run_mime_acl(acl_not_smtp_mime, &smtp_yield, &smtp_reply,
- &blackholed_by))
+ if ( acl_not_smtp_mime
+ && !run_mime_acl(acl_not_smtp_mime, &smtp_yield, &smtp_reply,
+ &blackholed_by)
+ )
goto TIDYUP;
#endif /* WITH_CONTENT_SCAN */
version supplied with Exim always accepts, but this is a hook for sysadmins to
supply their own checking code. The local_scan() function is run even when all
the recipients have been discarded. */
+/*XXS could we avoid this for the standard case, given that few people will use it? */
lseek(data_fd, (long int)SPOOL_DATA_START_OFFSET, SEEK_SET);
else
{
uschar *istemp = US"";
- uschar *s = NULL;
uschar *smtp_code;
- int size = 0;
- int sptr = 0;
+ gstring * g;
errmsg = local_scan_data;
switch(rc)
{
default:
- log_write(0, LOG_MAIN, "invalid return %d from local_scan(). Temporary "
- "rejection given", rc);
- goto TEMPREJECT;
+ log_write(0, LOG_MAIN, "invalid return %d from local_scan(). Temporary "
+ "rejection given", rc);
+ goto TEMPREJECT;
case LOCAL_SCAN_REJECT_NOLOGHDR:
- BIT_CLEAR(log_selector, log_selector_size, Li_rejected_header);
- /* Fall through */
+ BIT_CLEAR(log_selector, log_selector_size, Li_rejected_header);
+ /* Fall through */
case LOCAL_SCAN_REJECT:
- smtp_code = US"550";
- if (errmsg == NULL) errmsg = US"Administrative prohibition";
- break;
+ smtp_code = US"550";
+ if (!errmsg) errmsg = US"Administrative prohibition";
+ break;
case LOCAL_SCAN_TEMPREJECT_NOLOGHDR:
- BIT_CLEAR(log_selector, log_selector_size, Li_rejected_header);
- /* Fall through */
+ BIT_CLEAR(log_selector, log_selector_size, Li_rejected_header);
+ /* Fall through */
case LOCAL_SCAN_TEMPREJECT:
TEMPREJECT:
- smtp_code = US"451";
- if (errmsg == NULL) errmsg = US"Temporary local problem";
- istemp = US"temporarily ";
- break;
+ smtp_code = US"451";
+ if (!errmsg) errmsg = US"Temporary local problem";
+ istemp = US"temporarily ";
+ break;
}
- s = string_append(s, &size, &sptr, 2, US"F=",
- (sender_address[0] == 0)? US"<>" : sender_address);
- s = add_host_info_for_log(s, &size, &sptr);
- s[sptr] = 0;
+ g = string_append(NULL, 2, US"F=",
+ sender_address[0] == 0 ? US"<>" : sender_address);
+ g = add_host_info_for_log(g);
log_write(0, LOG_MAIN|LOG_REJECT, "%s %srejected by local_scan(): %.256s",
- s, istemp, string_printing(errmsg));
+ string_from_gstring(g), istemp, string_printing(errmsg));
if (smtp_input)
{
message id is actually an addr-spec, we can use the parse routine to canonicalize
it. */
-size = 256;
-sptr = 0;
-s = store_get(size);
+g = string_get(256);
-s = string_append(s, &size, &sptr, 2,
+g = string_append(g, 2,
fake_response == FAIL ? US"(= " : US"<= ",
sender_address[0] == 0 ? US"<>" : sender_address);
if (message_reference)
- s = string_append(s, &size, &sptr, 2, US" R=", message_reference);
+ g = string_append(g, 2, US" R=", message_reference);
-s = add_host_info_for_log(s, &size, &sptr);
+g = add_host_info_for_log(g);
#ifdef SUPPORT_TLS
if (LOGGING(tls_cipher) && tls_in.cipher)
- s = string_append(s, &size, &sptr, 2, US" X=", tls_in.cipher);
+ g = string_append(g, 2, US" X=", tls_in.cipher);
if (LOGGING(tls_certificate_verified) && tls_in.cipher)
- s = string_append(s, &size, &sptr, 2, US" CV=",
- tls_in.certificate_verified ? "yes":"no");
+ g = string_append(g, 2, US" CV=", tls_in.certificate_verified ? "yes":"no");
if (LOGGING(tls_peerdn) && tls_in.peerdn)
- s = string_append(s, &size, &sptr, 3, US" DN=\"",
- string_printing(tls_in.peerdn), US"\"");
+ g = string_append(g, 3, US" DN=\"", string_printing(tls_in.peerdn), US"\"");
if (LOGGING(tls_sni) && tls_in.sni)
- s = string_append(s, &size, &sptr, 3, US" SNI=\"",
- string_printing(tls_in.sni), US"\"");
+ g = string_append(g, 3, US" SNI=\"", string_printing(tls_in.sni), US"\"");
#endif
if (sender_host_authenticated)
{
- s = string_append(s, &size, &sptr, 2, US" A=", sender_host_authenticated);
+ g = string_append(g, 2, US" A=", sender_host_authenticated);
if (authenticated_id)
{
- s = string_append(s, &size, &sptr, 2, US":", authenticated_id);
+ g = string_append(g, 2, US":", authenticated_id);
if (LOGGING(smtp_mailauth) && authenticated_sender)
- s = string_append(s, &size, &sptr, 2, US":", authenticated_sender);
+ g = string_append(g, 2, US":", authenticated_sender);
}
}
#ifndef DISABLE_PRDR
if (prdr_requested)
- s = string_catn(s, &size, &sptr, US" PRDR", 5);
+ g = string_catn(g, US" PRDR", 5);
#endif
#ifdef SUPPORT_PROXY
if (proxy_session && LOGGING(proxy))
- s = string_append(s, &size, &sptr, 2, US" PRX=", proxy_local_address);
+ g = string_append(g, 2, US" PRX=", proxy_local_address);
#endif
if (chunking_state > CHUNKING_OFFERED)
- s = string_catn(s, &size, &sptr, US" K", 2);
+ g = string_catn(g, US" K", 2);
sprintf(CS big_buffer, "%d", msg_size);
-s = string_append(s, &size, &sptr, 2, US" S=", big_buffer);
+g = string_append(g, 2, US" S=", big_buffer);
/* log 8BITMIME mode announced in MAIL_FROM
0 ... no BODY= used
if (LOGGING(8bitmime))
{
sprintf(CS big_buffer, "%d", body_8bitmime);
- s = string_append(s, &size, &sptr, 2, US" M8S=", big_buffer);
+ g = string_append(g, 2, US" M8S=", big_buffer);
}
+#ifndef DISABLE_DKIM
+if (LOGGING(dkim) && dkim_verify_overall)
+ g = string_append(g, 2, US" DKIM=", dkim_verify_overall);
+# ifdef EXPERIMENTAL_ARC
+if (LOGGING(dkim) && arc_state && Ustrcmp(arc_state, "pass") == 0)
+ g = string_catn(g, US" ARC", 4);
+# endif
+#endif
+
+if (LOGGING(receive_time))
+ g = string_append(g, 2, US" RT=", string_timediff(&received_time_taken));
+
if (*queue_name)
- s = string_append(s, &size, &sptr, 2, US" Q=", queue_name);
+ g = string_append(g, 2, US" Q=", queue_name);
/* If an addr-spec in a message-id contains a quoted string, it can contain
any characters except " \ and CR and so in particular it can contain NL!
&errmsg, &start, &end, &domain, FALSE);
allow_domain_literals = save_allow_domain_literals;
if (old_id != NULL)
- s = string_append(s, &size, &sptr, 2, US" id=", string_printing(old_id));
+ g = string_append(g, 2, US" id=", string_printing(old_id));
}
/* If subject logging is turned on, create suitable printing-character
text. By expanding $h_subject: we make use of the MIME decoding. */
-if (LOGGING(subject) && subject_header != NULL)
+if (LOGGING(subject) && subject_header)
{
int i;
uschar *p = big_buffer;
}
*p++ = '\"';
*p = 0;
- s = string_append(s, &size, &sptr, 2, US" T=", string_printing(big_buffer));
+ g = string_append(g, 2, US" T=", string_printing(big_buffer));
}
/* Terminate the string: string_cat() and string_append() leave room, but do
not put the zero in. */
-s[sptr] = 0;
+(void) string_from_gstring(g);
/* Create a message log file if message logs are being used and this message is
not blackholed. Write the reception stuff to it. We used to leave message log
creation until the first delivery, but this has proved confusing for some
people. */
-if (message_logs && blackholed_by == NULL)
+if (message_logs && !blackholed_by)
{
int fd;
}
if (fd < 0)
- {
log_write(0, LOG_MAIN|LOG_PANIC, "Couldn't open message log %s: %s",
spool_name, strerror(errno));
- }
-
else
{
FILE *message_log = fdopen(fd, "a");
else
{
uschar *now = tod_stamp(tod_log);
- fprintf(message_log, "%s Received from %s\n", now, s+3);
+ fprintf(message_log, "%s Received from %s\n", now, g->s+3);
if (deliver_freeze) fprintf(message_log, "%s frozen by %s\n", now,
frozen_by);
if (queue_only_policy) fprintf(message_log,
/* Re-use the log line workspace */
- sptr = 0;
- s = string_cat(s, &size, &sptr, US"SMTP connection lost after final dot");
- s = add_host_info_for_log(s, &size, &sptr);
- s[sptr] = 0;
- log_write(0, LOG_MAIN, "%s", s);
+ g->ptr = 0;
+ g = string_cat(g, US"SMTP connection lost after final dot");
+ g = add_host_info_for_log(g);
+ log_write(0, LOG_MAIN, "%s", string_from_gstring(g));
/* Delete the files for this aborted message. */
XXX We do not handle queue-only, freezing, or blackholes.
*/
-if(cutthrough.fd >= 0)
+if(cutthrough.fd >= 0 && cutthrough.delivery)
{
- uschar * msg= cutthrough_finaldot(); /* Ask the target system to accept the message */
+ uschar * msg = cutthrough_finaldot(); /* Ask the target system to accept the message */
/* Logging was done in finaldot() */
switch(msg[0])
{
log_write(0, LOG_MAIN |
(LOGGING(received_recipients)? LOG_RECIPIENTS : 0) |
(LOGGING(received_sender)? LOG_SENDER : 0),
- "%s", s);
+ "%s", g->s);
/* Log any control actions taken by an ACL or local_scan(). */
}
receive_call_bombout = FALSE;
-store_reset(s); /* The store for the main log message can be reused */
+store_reset(g); /* The store for the main log message can be reused */
/* If the message is frozen, and freeze_tell is set, do the telling. */
else if (chunking_state > CHUNKING_OFFERED)
{
- smtp_printf("250- %u byte chunk, total %d\r\n250 OK id=%s\r\n",
+ smtp_printf("250- %u byte chunk, total %d\r\n250 OK id=%s\r\n", FALSE,
chunking_datasize, message_size+message_linecount, message_id);
chunking_state = CHUNKING_OFFERED;
}
else
- smtp_printf("250 OK id=%s\r\n", message_id);
+ smtp_printf("250 OK id=%s\r\n", FALSE, message_id);
if (host_checking)
fprintf(stdout,
smtp_respond((fake_response == DEFER)? US"450" : US"550", 3, TRUE,
fake_response_text);
else
- smtp_printf("%.1024s\r\n", smtp_reply);
+ smtp_printf("%.1024s\r\n", FALSE, smtp_reply);
switch (cutthrough_done)
{
Uunlink(spool_fname(US"input", message_subdir, message_id, US"-D"));
Uunlink(spool_fname(US"input", message_subdir, message_id, US"-H"));
Uunlink(spool_fname(US"msglog", message_subdir, message_id, US""));
- message_id[0] = 0; /* Prevent a delivery from starting */
break;
case TMP_REJ:
Uunlink(spool_fname(US"input", message_subdir, message_id, US"-H"));
Uunlink(spool_fname(US"msglog", message_subdir, message_id, US""));
}
- message_id[0] = 0; /* Prevent a delivery from starting */
default:
break;
}
- cutthrough.delivery = FALSE;
- cutthrough.defer_pass = FALSE;
+ if (cutthrough_done != NOT_TRIED)
+ {
+ message_id[0] = 0; /* Prevent a delivery from starting */
+ cutthrough.delivery = cutthrough.callout_hold_only = FALSE;
+ cutthrough.defer_pass = FALSE;
+ }
}
/* For batched SMTP, generate an error message on failure, and do
git://git.exim.org / exim.git / blobdiff