- 1. There is a new Boolean global option called mua_wrapper, defaulting false.
- This causes Exim to run an a restricted mode, in order to provide a very
- specific service.
-
- Background: On a personal computer, it is a common requirement for all
- email to be sent to a smarthost. There are plenty of MUAs that can be
- configured to operate that way, for all the popular operating systems.
- However, there are MUAs for Unix-like systems that cannot be so configured:
- they submit messages using the command line interface of
- /usr/sbin/sendmail. In addition, utility programs such as cron submit
- messages this way.
-
- Requirement: The requirement is for something that can provide the
- /usr/sbin/sendmail interface and deliver messages to a smarthost, but not
- provide any queueing or retrying facilities. Furthermore, the delivery to
- the smarthost should be synchronous, so that if it fails, the sending MUA
- is immediately informed. In other words, we want something that in effect
- converts a command-line MUA into a TCP/SMTP MUA.
-
- Solutions: There are a number of applications (for example, ssmtp) that do
- this job. However, people have found them to be lacking in various ways.
- For instance, some sites want to allow aliasing and forwarding before
- sending to the smarthost.
-
- Using Exim: Exim already had the necessary infrastructure for doing this
- job. Just a few tweaks were needed to make it behave as required, though it
- is somewhat of an overkill to use a fully-featured MTA for this purpose.
-
- Setting mua_wrapper=true causes Exim to run in a special mode where it
- assumes that it is being used to "wrap" a command-line MUA in the manner
- just described.
-
- If you set mua_wrapper=true, you also need to provide a compatible router
- and transport configuration. Typically there will be just one router and
- one transport, sending everything to a smarthost.
-
- When run in MUA wrapping mode, the behaviour of Exim changes in the
- following ways:
-
- (a) A daemon cannot be run, nor will Exim accept incoming messages from
- inetd. In other words, the only way to submit messages is via the
- command line.
-
- (b) Each message is synchonously delivered as soon as it is received (-odi
- is assumed). All queueing options (queue_only, queue_smtp_domains,
- control=queue, control=freeze in an ACL etc.) are quietly ignored. The
- Exim reception process does not finish until the delivery attempt is
- complete. If the delivery was successful, a zero return code is given.
-
- (c) Address redirection is permitted, but the final routing for all
- addresses must be to the same remote transport, and to the same list of
- hosts. Furthermore, the return_address must be the same for all
- recipients, as must any added or deleted header lines. In other words,
- it must be possible to deliver the message in a single SMTP
- transaction, however many recipients there are.
-
- (d) If the conditions in (c) are not met, or if routing any address results
- in a failure or defer status, or if Exim is unable to deliver all the
- recipients successfully to one of the hosts immediately, delivery of
- the entire message fails.
-
- (e) Because no queueing is allowed, all failures are treated as permanent;
- there is no distinction between 4xx and 5xx SMTP response codes from
- the smarthost. Furthermore, because only a single yes/no response can
- be given to the caller, it is not possible to deliver to some
- recipients and not others. If there is an error (temporary or
- permanent) for any recipient, all are failed.
-
- (f) If more than one host is listed, Exim will try another host after a
- connection failure or a timeout, in the normal way. However, if this
- kind of failure happens for all the hosts, the delivery fails.
-
- (g) When delivery fails, an error message is written to the standard error
- stream (as well as to Exim's log), and Exim exits to the caller with a
- return code value 1. The message is expunged from Exim's spool files.
- No bounce messages are ever generated.
-
- (h) No retry data is maintained, and any retry rules are ignored.
-
- (i) A number of Exim options are overridden: deliver_drop_privilege is
- forced true, max_rcpt in the smtp transport is forced to "unlimited",
- remote_max_parallel is forced to one, and fallback hosts are ignored.
-
- The overall effect is that Exim makes a single synchronous attempt to
- deliver the message, failing if there is any kind of problem. Because no
- local deliveries are done and no daemon can be run, Exim does not need root
- privilege. It should be possible to run it setuid=exim instead of
- setuid=root. See section 48.3 in the 4.40 manual for a general discussion
- about the advantages and disadvantages of running without root privilege.
-
- 2. There have been problems with DNS servers when SRV records are looked up.
- Some mis-behaving servers return a DNS error or timeout when a non-existent
- SRV record is sought. Similar problems have in the past been reported for
- MX records. The global dns_again_means_nonexist option can help with this
- problem, but it is heavy-handed because it is a global option. There are
- now two new options for the dnslookup router. They are called
- srv_fail_domains and mx_fail_domains. In each case, the value is a domain
- list. If an attempt to look up an SRV or MX record results in a DNS failure
- or "try again" response, and the domain matches the relevant list, Exim
- behaves as if the DNS had responded "no such record". In the case of an SRV
- lookup, this means that the router proceeds to look for MX records; in the
- case of an MX lookup, it proceeds to look for A or AAAA records, unless the
- domain matches mx_domains.
-
- 3. The following functions are now available in the local_scan() API:
-
- (a) void header_remove(int occurrence, uschar *name)
-
- This function removes header lines. If "occurrence" is zero or negative,
- all occurrences of the header are removed. If occurrence is greater
- than zero, that particular instance of the header is removed. If no
- header(s) can be found that match the specification, the function does
- nothing.
-
- (b) BOOL header_testname(header_line *hdr, uschar *name, int length,
- BOOL notdel)
-
- This function tests whether the given header has the given name. It
- is not just a string comparison, because whitespace is permitted
- between the name and the colon. If the "notdel" argument is TRUE, a
- FALSE return is forced for all "deleted" headers; otherwise they are
- not treated specially. For example:
-
- if (header_testname(h, US"X-Spam", 6, TRUE)) ...
-
- (c) void header_add_at_position(BOOL after, uschar *name, BOOL topnot,
- int type, char *format, ...)
-
- This function adds a new header line at a specified point in the header
- chain. If "name" is NULL, the new header is added at the end of the
- chain if "after" is TRUE, or at the start if "after" is FALSE. If
- "name" is not NULL, the headers are searched for the first non-deleted
- header that matches the name. If one is found, the new header is added
- before it if "after" is FALSE. If "after" is true, the new header is
- added after the found header and any adjacent subsequent ones with the
- same name (even if marked "deleted"). If no matching non-deleted header
- is found, the "topnot" option controls where the header is added. If it
- is TRUE, addition is at the top; otherwise at the bottom. Thus, to add
- a header after all the Received: headers, or at the top if there are no
- Received: headers, you could use
-
- header_add_at_position(TRUE, US"Received", TRUE, ' ', "X-xxx: ...");
-
- Normally, there is always at least one non-deleted Received: header,
- but there may not be if received_header_text expands to an empty
- string.
-
- (d) BOOL receive_remove_recipient(uschar *recipient)
-
- This is a convenience function to remove a named recipient from the
- list of recipients. It returns TRUE if a recipient was removed, and
- FALSE if no matching recipient could be found. The argument must be a
- complete email address.
-
- 4. When an ACL "warn" statement adds one or more header lines to a message,
- they are added at the end of the existing header lines by default. It is
- now possible to specify that any particular header line should be added
- right at the start (before all the Received: lines) or immediately after
- the first block of Received: lines in the message. This is done by
- specifying :at_start: or :after_received: (or, for completeness, :at_end:)
- before the text of the header line. (Header text cannot start with a colon,
- as there has to be a header name first.) For example:
-
- warn message = :after_received:X-My-Header: something or other...
-
- If more than one header is supplied in a single warn statement, each one is
- treated independently and can therefore be placed differently. If you add
- more than one line at the start, or after the Received: block, they will
- end up in reverse order.
-
- Warning: This facility currently applies only to header lines that are
- added in an ACL. It does NOT work for header lines that are added in a
- system filter or in a router or transport.
-
- 5. There is now a new error code that can be used in retry rules. Its name is
- "rcpt_4xx", and there are three forms. A literal "rcpt_4xx" matches any 4xx
- error received for an outgoing SMTP RCPT command; alternatively, either the
- first or both of the x's can be given as digits, for example: "rcpt_45x" or
- "rcpt_436". If you want (say) to recognize 452 errors given to RCPT
- commands by a particular host, and have only a one-hour retry for them, you
- can set up a retry rule of this form:
-
- the.host.name rcpt_452 F,1h,10m
-
- Naturally, this rule must come before any others that would match.
-
- These new errors apply to both outgoing SMTP (the smtp transport) and
- outgoing LMTP (either the lmtp transport, or the smtp transport in LMTP
- mode). Note, however, that they apply only to responses to RCPT commands.
-
- 6. The "postmaster" option of the callout feature of address verification has
- been extended to make it possible to use a non-empty MAIL FROM address when
- checking a postmaster address. The new suboption is called "postmaster_
- mailfrom", and you use it like this:
-
- require verify = sender/callout=postmaster_mailfrom=abc@x.y.z
-
- Providing this suboption causes the postmaster check to be done using the
- given address. The original "postmaster" option is equivalent to
-
- require verify = sender/callout=postmaster_mailfrom=
-
- If both suboptions are present, the rightmost one overrides.
-
- Important notes:
-
- (1) If you use a non-empty sender address for postmaster checking, there is
- the likelihood that the remote host will itself initiate a callout
- check back to your host to check that address. As this is a "normal"
- callout check, the sender will most probably be empty, thus avoiding
- possible callout loops. However, to be on the safe side it would be
- best to set up your own ACLs so that they do not do sender verification
- checks when the recipient is the address you use for postmaster callout
- checking.
-
- (2) The caching arrangements for postmaster checking do NOT take account of
- the sender address. It is assumed that either the empty address, or a
- fixed non-empty address will be used. All that Exim remembers is that
- the postmaster check for the domain succeeded or failed.
-
- 7. When verifying addresses in header lines using the verify=header_sender
- option, Exim behaves by default as if the addresses are envelope sender
- addresses from a message. Callout verification therefore tests to see
- whether a bounce message could be delivered, by using an empty address in
- the MAIL FROM command. However, it is arguable that these addresses might
- never be used as envelope senders, and could therefore justifiably reject
- bounce messages (empty senders). There is now an additional callout option
- for verify=header_sender that allows you to specify what address to use in
- the MAIL FROM command. You use it as in this example:
-
- require verify = header_sender/callout=mailfrom=abcd@x.y.z
-
- Important notes:
-
- (1) As in the case of postmaster_mailfrom (see above), you should think
- about possible loops.
-
- (2) In this case, as in the case of recipient callouts with non-empty
- senders (the use_sender option), caching is done on the basis of a
- recipient/sender pair.
-
- 8. If you build Exim with USE_READLINE=yes in Local/Makefile, it will try to
- load libreadline dynamically whenever the -be (test expansion) option is
- used without command line arguments. If successful, it will then use
- readline() for reading the test data. A line history is supported. By the
- time Exim does this, it is running as the calling user, so this should not
- cause any security problems. Security is the reason why this is NOT
- supported for -bt or -bv, when Exim is running as root or exim,
- respectively. Note that this option adds to the size of the Exim binary,
- because the dynamic loading library is not otherwise included. On my
- desktop it adds about 2.5K. You may need to add -ldl to EXTRA_LIBS when you
- set USE_READLINE=yes.
-
- 9. Added ${str2b64:<string>} to the expansion operators. This operator
- converts an arbitrary string into one that is base64 encoded.
-
-10. A new authenticator, called cyrus_sasl, has been added. This requires
- the presence of the Cyrus SASL library; it authenticates by calling this
- library, which supports a number of authentication mechanisms, including
- PLAIN and LOGIN, but also several others that Exim does not support
- directly. The code for this authenticator was provided by Matthew
- Byng-Maddick of A L Digital Ltd (http://www.aldigital.co.uk). Here follows
- draft documentation:
-
- xx. THE CYRUS_SASL AUTHENTICATOR
-
- The cyrus_sasl authenticator provides server support for the Cyrus library
- Implementation of the RFC 2222 "Simple Authentication and Security Layer".
- It provides a gatewaying mechanism directly to the Cyrus interface, so if
- your Cyrus library can do, for example, CRAM-MD5, then so can the
- cyrus_sasl authenticator. By default it uses the public name of the driver
- to determine which mechanism to support.
-
- Where access to some kind of secret file is required, for example in GSSAPI
- or CRAM-MD5, it is worth noting that the authenticator runs as the exim
- user, and that the Cyrus SASL library has no way of escalating privileges
- by default. You may also find you need to set environment variables,
- depending on the driver you are using.
-
- xx.1 Using cyrus_sasl as a server
-
- The cyrus_sasl authenticator has four private options. It puts the username
- (on a successful authentication) into $1.
-
- server_hostname Type: string* Default: $primary_hostname
-
- This option selects the hostname that is used when communicating with
- the library. It is up to the underlying SASL plug-in what it does with
- this data.
-
- server_mech Type: string Default: public_name
-
- This option selects the authentication mechanism this driver should
- use. It allows you to use a different underlying mechanism from the
- advertised name. For example:
-
- sasl:
- driver = cyrus_sasl
- public_name = X-ANYTHING
- server_mech = CRAM-MD5
- server_set_id = $1
-
- server_realm Type: string Default: unset
-
- This is the SASL realm that the server is claiming to be in.
-
- server_service Type: string Default: "smtp"
-
- This is the SASL service that the server claims to implement.
-
- For straigthforward cases, you do not need to set any of the
- authenticator's private options. All you need to do is to specify an
- appropriate mechanism as the public name. Thus, if you have a SASL library
- that supports CRAM-MD5 and PLAIN, you might have two authenticators as
- follows:
-
- sasl_cram_md5:
- driver = cyrus_sasl
- public_name = CRAM-MD5
- server_set_id = $1
-
- sasl_plain:
- driver = cyrus_sasl
- public_name = PLAIN
- server_set_id = $1
-
-11. There is a new global option called tls_on_connect_ports. Its value must be
- a list of port numbers; the most common use is expected to be
-
- tls_on_connect_ports = 465
-
- Setting this option has the same effect as -tls-on-connect on the command
- line, but only for the specified ports. It applies to all connections, both
- via the daemon and via inetd. You still need to specify all the ports for
- the daemon (using daemon_smtp_ports or local_interfaces or the -X command
- line option) because this option does not add an extra port -- rather, it
- specifies different behaviour on a port that is defined elsewhere. The
- -tls-on-connect command line option overrides tls_on_connect_ports, and
- forces tls-on-connect for all ports.
-
-12. There is a new ACL that is run when a DATA command is received, before the
- data itself is received. The ACL is defined by acl_smtp_predata. (Compare
- acl_smtp_data, which is run after the data has been received.)
- This new ACL allows a negative response to be given to the DATA command
- itself. Header lines added by MAIL or RCPT ACLs are not visible at this
- time, but any that are defined here are visible when the acl_smtp_data ACL
- is run.
-
-13. The "control=submission" ACL modifier has an option "/domain=xxx" which
- specifies the domain to be used when creating From: or Sender: lines using
- the authenticated id as a local part. If the option is supplied with an
- empty domain, that is, just "/domain=", Exim assumes that the authenticated
- id is a complete email address, and it uses it as is when creating From:
- or Sender: lines.
-
-14. It is now possible to make retry rules that apply only when the failing
- message has a specific sender. In particular, this can be used to define
- retry rules that apply only to bounce messages. The syntax is to add a new
- third item to a retry rule, of the form "senders=<address list>". The retry
- timings themselves then become the fourth item. For example:
-
- * * senders=: F,1h,30m
-
- would match all bounce messages. If the address list contains white space,
- it must be enclosed in quotes. For example:
-
- a.domain timeout senders="x@b.dom : y@c.dom" G,8h,10m,1.5
-
- When testing retry rules using -brt, you can supply a sender using the -f
- command line option, like this:
-
- exim -f "" -brt user@dom.ain
-
- If you do not set -f with -brt, a retry rule that contains a senders list
- will never be matched.
-
-15. Two new control modifiers have been added to ACLs: "control = enforce_sync"
- and "control = no_enforce_sync". This makes it possible to be selective
- about when SMTP synchronization is enforced. The global option
- smtp_enforce_sync now specifies the default state of the switch. These
- controls can appear in any ACL, but the most obvious place to put them is
- in the ACL defined by acl_smtp_connect, which is run at the start of an
- incoming SMTP connection, before the first synchronization check.
-
-16. Another two new control modifiers are "control = caseful_local_part" and
- "control = caselower_local_part". These are permitted only in the ACL
- specified by acl_smtp_rcpt (i.e. during RCPT processing). By default, the
- contents of $local_part are lower cased before ACL processing.
- After "control = caseful_local_part", any uppercase letters in the original
- local part are restored in $local_part for the rest of the ACL, or until
- "control = caselower_local_part" is encountered. However, this applies only
- to local part handling that takes place directly in the ACL (for example,
- as a key in lookups). If a "verify = recipient" test is obeyed, the
- case-related handling of the local part during the verification is
- controlled by the router configuration (see the caseful_local_part generic
- router option).
-
- This facility could be used, for example, to add a spam score to local
- parts containing upper case letters. For example, using $acl_m4 to
- accumulate the spam score:
-
- warn control = caseful_local_part
- set acl_m4 = ${eval:\
- $acl_m4 + \
- ${if match{$local_part}{[A-Z]}{1}{0}}\
- }
- control = caselower_local_part
-
- Notice that we put back the lower cased version afterwards, assuming that
- is what is wanted for subsequent tests.
-
-17. The option hosts_connection_nolog is provided so that certain hosts can be
- excepted from logging when the +smtp_connection log selector is set. For
- example, you might want not to log SMTP connections from local processes,
- or from 127.0.0.1, or from your local LAN. The option is a host list with
- an unset default. Because it is consulted in the main loop of the daemon,
- you should strive to restrict its value to a short inline list of IP
- addresses and networks. To disable logging SMTP connections from local
- processes, you must create a host list with an empty item. For example:
-
- hosts_connection_nolog = :
-
- If the +smtp_connection log selector is not set, this option has no effect.
-
-18. There is now an acl called acl_smtp_quit, which is run for the QUIT
- command. The outcome of the ACL does not affect the response code to QUIT,
- which is always 221. Thus, the ACL does not in fact control any access.
- For this reason, the only verbs that are permitted are "accept" and "warn".
-
- The ACL can be used for tasks such as custom logging at the end of an SMTP
- session. For example, you can use ACL variables in other ACLs to count
- messages, recipients, etc., and log the totals at QUIT time using one or
- more "logwrite" modifiers on a "warn" command.
-
- You do not need to have a final "accept", but if you do, you can use a
- "message" modifier to specify custom text that is sent as part of the 221
- response.
-
- This ACL is run only for a "normal" QUIT. For certain kinds of disastrous
- failure (for example, failure to open a log file, or when Exim is bombing
- out because it has detected an unrecoverable error), all SMTP commands
- from the client are given temporary error responses until QUIT is received
- or the connection is closed. In these special cases, the ACL is not run.
-
-19. The appendfile transport has two new options, mailbox_size and mailbox_
- filecount. If either these options are set, it is expanded, and the result
- is taken as the current size of the mailbox or the number of files in the
- mailbox, respectively. This makes it possible to use some external means of
- maintaining the data about the size of a mailbox for enforcing quota
- limits. The result of expanding these option values must be a decimal
- number, optionally followed by "K" or "M".
-
-20. It seems that there are broken clients in use that cannot handle multiline
- SMTP responses. Can't people who implement these braindead programs read?
- RFC 821 mentions multiline responses, and it is over 20 years old. They
- must handle multiline responses for EHLO, or do they still use HELO?
- Anyway, here is YAWFAB (yet another workaround for asinine brokenness).
- There's a new ACL switch that can be set by
-
- control = no_multiline_responses
-
- If this is set, it suppresses multiline SMTP responses from ACL rejections.
- One way of doing this would have been just to put out these responses as
- one long line. However, RFC 2821 specifies a maximum of 512 bytes per
- response ("use multiline responses for more" it says), and some of the
- responses might get close to that. So I have implemented this by doing two
- very easy things:
-
- (1) Extra information that is normally output as part of a rejection
- caused by sender verification failure is omitted. Only the final line
- (typically "sender verification failed") is now sent.
-
- (2) If a "message" modifier supplies a multiline response, only the first
- line is output.
-
- The setting of the switch can, of course, be made conditional on the
- calling host.
-
-21. There is now support for the libradius library that comes with FreeBSD.
- This is an alternative to the radiusclient library that Exim already
- supports. To use the FreeBSD library, you need to set
-
- RADIUS_LIB_TYPE=RADLIB
-
- in Local/Makefile, in addition to RADIUS_CONFIGURE_FILE, and you probably
- also need -libradius in EXTRALIBS.
-
-
-Version 4.42
+ NOTE: this version is not guaranteed backwards-compatible, please read the
+ items below carefully
+
+ 1. A new main configuration option, "openssl_options", is available if Exim
+ is built with SSL support provided by OpenSSL. The option allows
+ administrators to specify OpenSSL options to be used on connections;
+ typically this is to set bug compatibility features which the OpenSSL
+ developers have not enabled by default. There may be security
+ consequences for certain options, so these should not be changed
+ frivolously.
+
+ 2. A new pipe transport option, "permit_coredumps", may help with problem
+ diagnosis in some scenarios. Note that Exim is typically installed as
+ a setuid binary, which on most OSes will inhibit coredumps by default,
+ so that safety mechanism would have to be overridden for this option to
+ be able to take effect.
+
+ 3. ClamAV 0.95 is now required for ClamAV support in Exim, unless
+ Local/Makefile sets: WITH_OLD_CLAMAV_STREAM=yes
+ Note that this switches Exim to use a new API ("INSTREAM") and a future
+ release of ClamAV will remove support for the old API ("STREAM").
+
+ The av_scanner option, when set to "clamd", now takes an optional third
+ part, "local", which causes Exim to pass a filename to ClamAV instead of
+ the file content. This is the same behaviour as when clamd is pointed at
+ a Unix-domain socket. For example:
+
+ av_scanner = clamd:192.0.2.3 1234:local
+
+ ClamAV's ExtendedDetectionInfo response format is now handled.
+
+ 4. There is now a -bmalware option, restricted to admin users. This option
+ takes one parameter, a filename, and scans that file with Exim's
+ malware-scanning framework. This is intended purely as a debugging aid
+ to ensure that Exim's scanning is working, not to replace other tools.
+ Note that the ACL framework is not invoked, so if av_scanner references
+ ACL variables without a fallback then this will fail.
+
+ 5. There is a new expansion operator, "reverse_ip", which will reverse IP
+ addresses; IPv4 into dotted quad, IPv6 into dotted nibble. Examples:
+
+ ${reverse_ip:192.0.2.4}
+ -> 4.2.0.192
+ ${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.3}
+ -> 3.0.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2
+
+ 6. There is a new ACL control called "debug", to enable debug logging.
+ This allows selective logging of certain incoming transactions within
+ production environments, with some care. It takes two options, "tag"
+ and "opts"; "tag" is included in the filename of the log and "opts"
+ is used as per the -d<options> command-line option. Examples, which
+ don't all make sense in all contexts:
+
+ control = debug
+ control = debug/tag=.$sender_host_address
+ control = debug/opts=+expand+acl
+ control = debug/tag=.$message_exim_id/opts=+expand
+
+ 7. It has always been implicit in the design and the documentation that
+ "the Exim user" is not root. src/EDITME said that using root was
+ "very strongly discouraged". This is not enough to keep people from
+ shooting themselves in the foot in days when many don't configure Exim
+ themselves but via package build managers. The security consequences of
+ running various bits of network code are severe if there should be bugs in
+ them. As such, the Exim user may no longer be root. If configured
+ statically, Exim will refuse to build. If configured as ref:user then Exim
+ will exit shortly after start-up. If you must shoot yourself in the foot,
+ then henceforth you will have to maintain your own local patches to strip
+ the safeties off.
+
+ 8. There is a new expansion condition, bool_lax{}. Where bool{} uses the ACL
+ condition logic to determine truth/failure and will fail to expand many
+ strings, bool_lax{} uses the router condition logic, where most strings
+ do evaluate true.
+ Note: bool{00} is false, bool_lax{00} is true.
+
+ 9. Routers now support multiple "condition" tests.
+
+10. There is now a runtime configuration option "tcp_wrappers_daemon_name".
+ Setting this allows an admin to define which entry in the tcpwrappers
+ config file will be used to control access to the daemon. This option
+ is only available when Exim is built with USE_TCP_WRAPPERS. The
+ default value is set at build time using the TCP_WRAPPERS_DAEMON_NAME
+ build option.
+
+11. [POSSIBLE CONFIG BREAKAGE] The default value for system_filter_user is now
+ the Exim run-time user, instead of root.
+
+12. [POSSIBLE CONFIG BREAKAGE] ALT_CONFIG_ROOT_ONLY is no longer optional and
+ is forced on. This is mitigated by the new build option
+ TRUSTED_CONFIG_LIST which defines a list of configuration files which
+ are trusted; one per line. If a config file is owned by root and matches
+ a pathname in the list, then it may be invoked by the Exim build-time
+ user without Exim relinquishing root privileges.
+
+13. [POSSIBLE CONFIG BREAKAGE] The Exim user is no longer automatically
+ trusted to supply -D<Macro[=Value]> overrides on the command-line. Going
+ forward, we recommend using TRUSTED_CONFIG_LIST with shim configs that
+ include the main config. As a transition mechanism, we are temporarily
+ providing a work-around: the new build option WHITELIST_D_MACROS provides
+ a colon-separated list of macro names which may be overridden by the Exim
+ run-time user. The values of these macros are constrained to the regex
+ ^[A-Za-z0-9_/.-]*$ (which explicitly does allow for empty values).
+
+
+Version 4.72
git://git.exim.org / exim.git / blobdiff