* Exim - an Internet mail transport agent *
*************************************************/
+/* Copyright (c) The Exim Maintainers 2020 - 2022 */
/* Copyright (c) University of Cambridge 1995 - 2019 */
-/* Copyright (c) The Exim Maintainers 2020 - 2021 */
/* See the file NOTICE for conditions of use and distribution. */
+/* SPDX-License-Identifier: GPL-2.0-or-later */
/* Portions Copyright (c) The OpenSSL Project 1999 */
#if OPENSSL_VERSION_NUMBER >= 0x10100000L
# define EXIM_HAVE_OCSP_RESP_COUNT
# define OPENSSL_AUTO_SHA256
+# define OPENSSL_MIN_PROTO_VERSION
#else
# define EXIM_HAVE_EPHEM_RSA_KEX
# define EXIM_HAVE_RAND_PSEUDO
# define EXIM_HAVE_SESSION_TICKET
# define EXIM_HAVE_OPESSL_TRACE
# define EXIM_HAVE_OPESSL_GET0_SERIAL
+# define EXIM_HAVE_OPESSL_OCSP_RESP_GET0_CERTS
+# define EXIM_HAVE_SSL_GET0_VERIFIED_CHAIN
# ifndef DISABLE_OCSP
# define EXIM_HAVE_OCSP
# endif
# define EXIM_HAVE_OPENSSL_CIPHER_GET_ID
#endif
+#if !defined(LIBRESSL_VERSION_NUMBER) && (OPENSSL_VERSION_NUMBER >= 0x030000000L)
+# define EXIM_HAVE_EXPORT_CHNL_BNGNG
+# define EXIM_HAVE_OPENSSL_X509_STORE_GET1_ALL_CERTS
+#endif
+
#if !defined(LIBRESSL_VERSION_NUMBER) \
|| LIBRESSL_VERSION_NUMBER >= 0x20010000L
# if !defined(OPENSSL_NO_ECDH)
# define OPENSSL_HAVE_KEYLOG_CB
# define OPENSSL_HAVE_NUM_TICKETS
# define EXIM_HAVE_OPENSSL_CIPHER_STD_NAME
+# define EXIM_HAVE_EXP_CHNL_BNGNG
+# define EXIM_HAVE_OPENSSL_OCSP_RESP_GET0_SIGNER
# else
# define OPENSSL_BAD_SRVR_OURCERT
# endif
#endif
+#if !defined(LIBRESSL_VERSION_NUMBER) && (OPENSSL_VERSION_NUMBER >= 0x010002000L)
+# define EXIM_HAVE_EXPORT_CHNL_BNGNG
+#endif
+
#if !defined(EXIM_HAVE_OPENSSL_TLSEXT) && !defined(DISABLE_OCSP)
# warning "OpenSSL library version too old; define DISABLE_OCSP in Makefile"
# define DISABLE_OCSP
uschar * privatekey;
BOOL is_server;
#ifndef DISABLE_OCSP
- STACK_OF(X509) *verify_stack; /* chain for verifying the proof */
union {
struct {
uschar *file;
const uschar *file_expanded;
ocsp_resplist *olist;
+ STACK_OF(X509) *verify_stack; /* chain for verifying the proof */
} server;
struct {
X509_STORE *verify_store; /* non-null if status requested */
+ uschar *verify_errstr; /* only if _required */
BOOL verify_required;
} client;
} u_ocsp;
exim_openssl_state_st state_server = {.is_server = TRUE};
static int
-setup_certs(SSL_CTX *sctx, uschar *certs, uschar *crl, host_item *host,
- uschar ** errstr );
+setup_certs(SSL_CTX * sctx, uschar ** certs, uschar * crl, host_item * host,
+ uschar ** errstr);
/* Callbacks */
#ifndef DISABLE_OCSP
static int tls_server_stapling_cb(SSL *s, void *arg);
+static void x509_stack_dump_cert_s_names(const STACK_OF(X509) * sk);
+static void x509_store_dump_cert_s_names(X509_STORE * store);
#endif
*************************************************/
/* If dhparam is set, expand it, and load up the parameters for DH encryption.
+Server only.
Arguments:
sctx The current SSL CTX (inbound or outbound)
dhparam DH parameter file or fixed parameter identity string
- host connected host, if client; NULL if server
errstr error string pointer
Returns: TRUE if OK (nothing to set up, or setup worked)
*/
static BOOL
-init_dh(SSL_CTX *sctx, uschar *dhparam, const host_item *host, uschar ** errstr)
+init_dh(SSL_CTX * sctx, uschar * dhparam, uschar ** errstr)
{
-BIO *bio;
-DH *dh;
-uschar *dhexpanded;
-const char *pem;
+BIO * bio;
+#if OPENSSL_VERSION_NUMBER < 0x30000000L
+DH * dh;
+#else
+EVP_PKEY * pkey;
+#endif
+uschar * dhexpanded;
+const char * pem;
int dh_bitsize;
if (!expand_check(dhparam, US"tls_dhparam", &dhexpanded, errstr))
if (!(bio = BIO_new_file(CS dhexpanded, "r")))
{
tls_error(string_sprintf("could not read dhparams file %s", dhexpanded),
- host, US strerror(errno), errstr);
+ NULL, US strerror(errno), errstr);
return FALSE;
}
}
if (!(pem = std_dh_prime_named(dhexpanded)))
{
tls_error(string_sprintf("Unknown standard DH prime \"%s\"", dhexpanded),
- host, US strerror(errno), errstr);
+ NULL, US strerror(errno), errstr);
return FALSE;
}
bio = BIO_new_mem_buf(CS pem, -1);
}
-if (!(dh = PEM_read_bio_DHparams(bio, NULL, NULL, NULL)))
+if (!(
+#if OPENSSL_VERSION_NUMBER < 0x30000000L
+ dh = PEM_read_bio_DHparams(bio, NULL, NULL, NULL)
+#else
+ pkey = PEM_read_bio_Parameters_ex(bio, NULL, NULL, NULL)
+#endif
+ ) )
{
BIO_free(bio);
tls_error(string_sprintf("Could not read tls_dhparams \"%s\"", dhexpanded),
- host, NULL, errstr);
+ NULL, NULL, errstr);
return FALSE;
}
But older OpenSSL can only report in bytes (octets), not bits. If someone wants
to dance at the edge, then they can raise the limit or use current libraries. */
-#ifdef EXIM_HAVE_OPENSSL_DH_BITS
+#if OPENSSL_VERSION_NUMBER < 0x30000000L
+# ifdef EXIM_HAVE_OPENSSL_DH_BITS
/* Added in commit 26c79d5641d; `git describe --contains` says OpenSSL_1_1_0-pre1~1022
This predates OpenSSL_1_1_0 (before a, b, ...) so is in all 1.1.0 */
dh_bitsize = DH_bits(dh);
-#else
+# else
dh_bitsize = 8 * DH_size(dh);
+# endif
+#else /* 3.0.0 + */
+dh_bitsize = EVP_PKEY_get_bits(pkey);
#endif
/* Even if it is larger, we silently return success rather than cause things to
fail out, so that a too-large DH will not knock out all TLS; it's a debatable
-choice. */
+choice. Likewise for a failing attempt to set one. */
if (dh_bitsize <= tls_dh_max_bits)
{
- SSL_CTX_set_tmp_dh(sctx, dh);
- DEBUG(D_tls)
- debug_printf("Diffie-Hellman initialized from %s with %d-bit prime\n",
- dhexpanded ? dhexpanded : US"default", dh_bitsize);
+ if (
+#if OPENSSL_VERSION_NUMBER < 0x30000000L
+ SSL_CTX_set_tmp_dh(sctx, dh)
+#else
+ SSL_CTX_set0_tmp_dh_pkey(sctx, pkey)
+#endif
+ == 0)
+ {
+ ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
+ log_write(0, LOG_MAIN|LOG_PANIC, "TLS error (D-H param setting '%s'): %s",
+ dhexpanded ? dhexpanded : US"default", ssl_errstring);
+#if OPENSSL_VERSION_NUMBER >= 0x30000000L
+ /* EVP_PKEY_free(pkey); crashes */
+#endif
+ }
+ else
+ DEBUG(D_tls)
+ debug_printf("Diffie-Hellman initialized from %s with %d-bit prime\n",
+ dhexpanded ? dhexpanded : US"default", dh_bitsize);
}
else
DEBUG(D_tls)
- debug_printf("dhparams file %d bits, is > tls_dh_max_bits limit of %d\n",
- dh_bitsize, tls_dh_max_bits);
+ debug_printf("dhparams '%s' %d bits, is > tls_dh_max_bits limit of %d\n",
+ dhexpanded ? dhexpanded : US"default", dh_bitsize, tls_dh_max_bits);
+#if OPENSSL_VERSION_NUMBER < 0x30000000L
DH_free(dh);
-BIO_free(bio);
+#endif
+/* The EVP_PKEY ownership stays with the ctx; do not free it */
+BIO_free(bio);
return TRUE;
}
* Initialize for ECDH *
*************************************************/
-/* Load parameters for ECDH encryption.
+/* Load parameters for ECDH encryption. Server only.
For now, we stick to NIST P-256 because: it's simple and easy to configure;
it avoids any patent issues that might bite redistributors; despite events in
Arguments:
sctx The current SSL CTX (inbound or outbound)
- host connected host, if client; NULL if server
errstr error string pointer
Returns: TRUE if OK (nothing to set up, or setup worked)
*/
static BOOL
-init_ecdh(SSL_CTX * sctx, host_item * host, uschar ** errstr)
+init_ecdh(SSL_CTX * sctx, uschar ** errstr)
{
#ifdef OPENSSL_NO_ECDH
return TRUE;
int nid;
BOOL rv;
-if (host) /* No ECDH setup for clients, only for servers */
- return TRUE;
-
# ifndef EXIM_HAVE_ECDH
DEBUG(D_tls)
debug_printf("No OpenSSL API to define ECDH parameters, skipping\n");
)
{
tls_error(string_sprintf("Unknown curve name tls_eccurve '%s'", exp_curve),
- host, NULL, errstr);
+ NULL, NULL, errstr);
return FALSE;
}
EC_KEY * ecdh;
if (!(ecdh = EC_KEY_new_by_curve_name(nid)))
{
- tls_error(US"Unable to create ec curve", host, NULL, errstr);
+ tls_error(US"Unable to create ec curve", NULL, NULL, errstr);
return FALSE;
}
not to the stability of the interface. */
if ((rv = SSL_CTX_set_tmp_ecdh(sctx, ecdh) == 0))
- tls_error(string_sprintf("Error enabling '%s' curve", exp_curve), host, NULL, errstr);
+ tls_error(string_sprintf("Error enabling '%s' curve", exp_curve), NULL, NULL, errstr);
else
DEBUG(D_tls) debug_printf("ECDH: enabled '%s' curve\n", exp_curve);
EC_KEY_free(ecdh);
#else /* v 3.0.0 + */
if ((rv = SSL_CTX_set1_groups(sctx, &nid, 1)) == 0)
- tls_error(string_sprintf("Error enabling '%s' group", exp_curve), host, NULL, errstr);
+ tls_error(string_sprintf("Error enabling '%s' group", exp_curve), NULL, NULL, errstr);
else
DEBUG(D_tls) debug_printf("ECDH: enabled '%s' group\n", exp_curve);
* Expand key and cert file specs *
*************************************************/
+#if OPENSSL_VERSION_NUMBER < 0x30000000L
/*
Arguments:
s SSL connection (not used)
DEBUG(D_tls) debug_printf("Generating %d bit RSA key...\n", keylength);
-#ifdef EXIM_HAVE_RSA_GENKEY_EX
+# ifdef EXIM_HAVE_RSA_GENKEY_EX
if ( !BN_set_word(bn, (unsigned long)RSA_F4)
|| !(rsa_key = RSA_new())
|| !RSA_generate_key_ex(rsa_key, keylength, bn, NULL)
)
-#else
+# else
if (!(rsa_key = RSA_generate_key(keylength, RSA_F4, NULL, NULL)))
-#endif
+# endif
{
ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
}
return rsa_key;
}
+#endif /* pre-3.0.0 */
{
X509 * x509 = NULL;
EVP_PKEY * pkey;
-RSA * rsa;
X509_NAME * name;
uschar * where;
goto err;
where = US"generating pkey";
-if (!(rsa = rsa_callback(NULL, 0, 2048)))
- goto err;
+#if OPENSSL_VERSION_NUMBER < 0x30000000L
+ {
+ RSA * rsa;
+ if (!(rsa = rsa_callback(NULL, 0, 2048)))
+ goto err;
-where = US"assigning pkey";
-if (!EVP_PKEY_assign_RSA(pkey, rsa))
- goto err;
+ where = US"assigning pkey";
+ if (!EVP_PKEY_assign_RSA(pkey, rsa))
+ goto err;
+ }
+#else
+pkey = EVP_RSA_gen(2048);
+#endif
X509_set_version(x509, 2); /* N+1 - version 3 */
ASN1_INTEGER_set(X509_get_serialNumber(x509), 1);
*/
static void
-info_callback(SSL *s, int where, int ret)
+info_callback(SSL * s, int where, int ret)
{
DEBUG(D_tls)
{
- const uschar * str;
-
- if (where & SSL_ST_CONNECT)
- str = US"SSL_connect";
- else if (where & SSL_ST_ACCEPT)
- str = US"SSL_accept";
- else
- str = US"SSL info (undefined)";
+ gstring * g = NULL;
+
+ if (where & SSL_ST_CONNECT) g = string_append_listele(g, ',', US"SSL_connect");
+ if (where & SSL_ST_ACCEPT) g = string_append_listele(g, ',', US"SSL_accept");
+ if (where & SSL_CB_LOOP) g = string_append_listele(g, ',', US"state_chg");
+ if (where & SSL_CB_EXIT) g = string_append_listele(g, ',', US"hshake_exit");
+ if (where & SSL_CB_READ) g = string_append_listele(g, ',', US"read");
+ if (where & SSL_CB_WRITE) g = string_append_listele(g, ',', US"write");
+ if (where & SSL_CB_ALERT) g = string_append_listele(g, ',', US"alert");
+ if (where & SSL_CB_HANDSHAKE_START) g = string_append_listele(g, ',', US"hshake_start");
+ if (where & SSL_CB_HANDSHAKE_DONE) g = string_append_listele(g, ',', US"hshake_done");
if (where & SSL_CB_LOOP)
- debug_printf("%s: %s\n", str, SSL_state_string_long(s));
+ debug_printf("SSL %s: %s\n", g->s, SSL_state_string_long(s));
else if (where & SSL_CB_ALERT)
- debug_printf("SSL3 alert %s:%s:%s\n",
- str = where & SSL_CB_READ ? US"read" : US"write",
+ debug_printf("SSL %s %s:%s\n", g->s,
SSL_alert_type_string_long(ret), SSL_alert_desc_string_long(ret));
else if (where & SSL_CB_EXIT)
{
- if (ret == 0)
- debug_printf("%s: failed in %s\n", str, SSL_state_string_long(s));
- else if (ret < 0)
- debug_printf("%s: error in %s\n", str, SSL_state_string_long(s));
+ if (ret <= 0)
+ debug_printf("SSL %s: %s in %s\n", g->s,
+ ret == 0 ? "failed" : "error", SSL_state_string_long(s));
}
- else if (where & SSL_CB_HANDSHAKE_START)
- debug_printf("%s: hshake start: %s\n", str, SSL_state_string_long(s));
- else if (where & SSL_CB_HANDSHAKE_DONE)
- debug_printf("%s: hshake done: %s\n", str, SSL_state_string_long(s));
+ else if (where & (SSL_CB_HANDSHAKE_START | SSL_CB_HANDSHAKE_DONE))
+ debug_printf("SSL %s: %s\n", g->s, SSL_state_string_long(s));
}
}
old_cert = tlsp->peercert;
tlsp->peercert = X509_dup(cert);
/* NB we do not bother setting peerdn */
- if ((yield = event_raise(ev, US"tls:cert", string_sprintf("%d", depth))))
+ if ((yield = event_raise(ev, US"tls:cert", string_sprintf("%d", depth), &errno)))
{
log_write(0, LOG_MAIN, "[%s] %s verify denied by event-action: "
"depth=%d cert=%s: %s",
else if (depth != 0)
{
DEBUG(D_tls) debug_printf("SSL verify ok: depth=%d SN=%s\n", depth, dn);
-#ifndef DISABLE_OCSP
- if (tlsp == &tls_out && client_static_state->u_ocsp.client.verify_store)
- { /* client, wanting stapling */
- /* Add the server cert's signing chain as the one
- for the verification of the OCSP stapled information. */
-
- if (!X509_STORE_add_cert(client_static_state->u_ocsp.client.verify_store,
- cert))
- ERR_clear_error();
- sk_X509_push(client_static_state->verify_stack, cert);
- }
-#endif
#ifndef DISABLE_EVENT
if (verify_event(tlsp, cert, depth, dn, calledp, optionalp, US"SSL"))
return 0; /* reject, with peercert set */
#endif
if (preverify_ok == 1)
- {
tls_out.dane_verified = TRUE;
-#ifndef DISABLE_OCSP
- if (client_static_state->u_ocsp.client.verify_store)
- { /* client, wanting stapling */
- /* Add the server cert's signing chain as the one
- for the verification of the OCSP stapled information. */
-
- if (!X509_STORE_add_cert(client_static_state->u_ocsp.client.verify_store,
- cert))
- ERR_clear_error();
- sk_X509_push(client_static_state->verify_stack, cert);
- }
-#endif
- }
else
{
int err = X509_STORE_CTX_get_error(x509ctx);
#ifndef DISABLE_OCSP
+static void
+time_print(BIO * bp, const char * str, ASN1_GENERALIZEDTIME * time)
+{
+BIO_printf(bp, "\t%s: ", str);
+ASN1_GENERALIZEDTIME_print(bp, time);
+BIO_puts(bp, "\n");
+}
+
/*************************************************
* Load OCSP information into state *
*************************************************/
OCSP_SINGLERESP * single_response;
ASN1_GENERALIZEDTIME * rev, * thisupd, * nextupd;
STACK_OF(X509) * sk;
-unsigned long verify_flags;
int status, reason, i;
DEBUG(D_tls)
goto bad;
}
-sk = state->verify_stack;
-verify_flags = OCSP_NOVERIFY; /* check sigs, but not purpose */
+sk = state->u_ocsp.server.verify_stack; /* set by setup_certs() / chain_from_pem_file() */
/* May need to expose ability to adjust those flags?
OCSP_NOSIGS OCSP_NOVERIFY OCSP_NOCHAIN OCSP_NOCHECKS OCSP_NOEXPLICIT
OCSP_TRUSTOTHER OCSP_NOINTERN */
-/* This does a full verify on the OCSP proof before we load it for serving
-up; possibly overkill - just date-checks might be nice enough.
+/* This does a partial verify (only the signer link, not the whole chain-to-CA)
+on the OCSP proof before we load it for serving up; possibly overkill -
+just date-checks might be nice enough.
OCSP_basic_verify takes a "store" arg, but does not
-use it for the chain verification, which is all we do
-when OCSP_NOVERIFY is set. The content from the wire
-"basic_response" and a cert-stack "sk" are all that is used.
+use it for the chain verification, when OCSP_NOVERIFY is set.
+The content from the wire "basic_response" and a cert-stack "sk" are all
+that is used.
We have a stack, loaded in setup_certs() if tls_verify_certificates
was a file (not a directory, or "system"). It is unfortunate we
handle the "system" case too, but there seems to be no library
function for getting a stack from a store.
[ In OpenSSL 1.1 - ? X509_STORE_CTX_get0_chain(ctx) ? ]
+[ 3.0.0 - sk = X509_STORE_get1_all_certs(store) ]
We do not free the stack since it could be needed a second time for
SNI handling.
Separately we might try to replace using OCSP_basic_verify() - which seems to not
be a public interface into the OpenSSL library (there's no manual entry) -
+(in 3.0.0 + is is public)
But what with? We also use OCSP_basic_verify in the client stapling callback.
And there we NEED it; we must verify that status... unless the
library does it for us anyway? */
-if ((i = OCSP_basic_verify(basic_response, sk, NULL, verify_flags)) < 0)
+if ((i = OCSP_basic_verify(basic_response, sk, NULL, OCSP_NOVERIFY)) < 0)
{
DEBUG(D_tls)
{
ERR_error_string_n(ERR_get_error(), ssl_errstring, sizeof(ssl_errstring));
- debug_printf("OCSP response verify failure: %s\n", US ssl_errstring);
+ debug_printf("OCSP response has bad signature: %s\n", US ssl_errstring);
}
goto bad;
}
if (!OCSP_check_validity(thisupd, nextupd, EXIM_OCSP_SKEW_SECONDS, EXIM_OCSP_MAX_AGE))
{
- DEBUG(D_tls) debug_printf("OCSP status invalid times.\n");
+ DEBUG(D_tls)
+ {
+ BIO * bp = BIO_new(BIO_s_mem());
+ uschar * s = NULL;
+ int len;
+ time_print(bp, "This OCSP Update", thisupd);
+ if (nextupd) time_print(bp, "Next OCSP Update", nextupd);
+ if ((len = (int) BIO_get_mem_data(bp, CSS &s)) > 0) debug_printf("%.*s", len, s);
+ debug_printf("OCSP status invalid times.\n");
+ }
goto bad;
}
ocsp_resplist ** op = &state->u_ocsp.server.olist, * oentry;
while (oentry = *op)
op = &oentry->next;
- *op = oentry = store_get(sizeof(ocsp_resplist), FALSE);
+ *op = oentry = store_get(sizeof(ocsp_resplist), GET_UNTAINTED);
oentry->next = NULL;
oentry->resp = resp;
}
static void
-ocsp_free_response_list(exim_openssl_state_st * cbinfo)
+ocsp_free_response_list(exim_openssl_state_st * state)
{
-for (ocsp_resplist * olist = cbinfo->u_ocsp.server.olist; olist;
+for (ocsp_resplist * olist = state->u_ocsp.server.olist; olist;
olist = olist->next)
OCSP_RESPONSE_free(olist->resp);
-cbinfo->u_ocsp.server.olist = NULL;
+state->u_ocsp.server.olist = NULL;
}
#endif /*!DISABLE_OCSP*/
if (olist && !*olist)
olist = NULL;
+ /* If doing a re-expand after SNI, avoid reloading the OCSP
+ responses when the list of filenames has not changed.
+ The creds-invali on content change wipes file_expanded, so that
+ always reloads here. */
+
if ( state->u_ocsp.server.file_expanded && olist
&& (Ustrcmp(olist, state->u_ocsp.server.file_expanded) == 0))
{
* One-time init credentials for server and client *
**************************************************/
+static void
+normalise_ciphers(uschar ** ciphers, const uschar * pre_expansion_ciphers)
+{
+uschar * s = *ciphers;
+
+if (!s || !Ustrchr(s, '_')) return; /* no change needed */
+
+if (s == pre_expansion_ciphers)
+ s = string_copy(s); /* get writable copy */
+
+for (uschar * t = s; *t; t++) if (*t == '_') *t = '-';
+*ciphers = s;
+}
+
static int
server_load_ciphers(SSL_CTX * ctx, exim_openssl_state_st * state,
uschar * ciphers, uschar ** errstr)
{
-for (uschar * s = ciphers; *s; s++ ) if (*s == '_') *s = '-';
DEBUG(D_tls) debug_printf("required ciphers: %s\n", ciphers);
if (!SSL_CTX_set_cipher_list(ctx, CS ciphers))
return tls_error(US"SSL_CTX_set_cipher_list", NULL, NULL, errstr);
if (opt_unset_or_noexpand(tls_dhparam))
{
DEBUG(D_tls) debug_printf("TLS: preloading DH params for server\n");
- if (init_dh(ctx, tls_dhparam, NULL, &dummy_errstr))
+ if (init_dh(ctx, tls_dhparam, &dummy_errstr))
state_server.lib_state.dh = TRUE;
}
+else
+ DEBUG(D_tls) debug_printf("TLS: not preloading DH params for server\n");
if (opt_unset_or_noexpand(tls_eccurve))
{
DEBUG(D_tls) debug_printf("TLS: preloading ECDH curve for server\n");
- if (init_ecdh(ctx, NULL, &dummy_errstr))
+ if (init_ecdh(ctx, &dummy_errstr))
state_server.lib_state.ecdh = TRUE;
}
-
-#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
-/* If we can, preload the server-side cert, key and ocsp */
-
-if ( opt_set_and_noexpand(tls_certificate)
-# ifndef DISABLE_OCSP
- && opt_unset_or_noexpand(tls_ocsp_file)
-#endif
- && opt_unset_or_noexpand(tls_privatekey))
- {
- /* Set watches on the filenames. The implementation does de-duplication
- so we can just blindly do them all. */
-
- if ( tls_set_watch(tls_certificate, TRUE)
-# ifndef DISABLE_OCSP
- && tls_set_watch(tls_ocsp_file, TRUE)
-#endif
- && tls_set_watch(tls_privatekey, TRUE))
- {
- state_server.certificate = tls_certificate;
- state_server.privatekey = tls_privatekey;
-#ifndef DISABLE_OCSP
- state_server.u_ocsp.server.file = tls_ocsp_file;
-#endif
-
- DEBUG(D_tls) debug_printf("TLS: preloading server certs\n");
- if (tls_expand_session_files(ctx, &state_server, &dummy_errstr) == OK)
- state_server.lib_state.conn_certs = TRUE;
- }
- }
-else if ( !tls_certificate && !tls_privatekey
-# ifndef DISABLE_OCSP
- && !tls_ocsp_file
-#endif
- )
- { /* Generate & preload a selfsigned cert. No files to watch. */
- if (tls_expand_session_files(ctx, &state_server, &dummy_errstr) == OK)
- {
- state_server.lib_state.conn_certs = TRUE;
- lifetime = f.running_in_test_harness ? 2 : 60 * 60; /* 1 hour */
- }
- }
else
- DEBUG(D_tls) debug_printf("TLS: not preloading server certs\n");
-
+ DEBUG(D_tls) debug_printf("TLS: not preloading ECDH curve for server\n");
+#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
/* If we can, preload the Authorities for checking client certs against.
Actual choice to do verify is made (tls_{,try_}verify_hosts)
-at TLS conn startup */
+at TLS conn startup.
+Do this before the server ocsp so that its info can verify the ocsp. */
if ( opt_set_and_noexpand(tls_verify_certificates)
&& opt_unset_or_noexpand(tls_crl))
&& tls_set_watch(tls_verify_certificates, FALSE)
&& tls_set_watch(tls_crl, FALSE))
{
+ uschar * v_certs = tls_verify_certificates;
DEBUG(D_tls) debug_printf("TLS: preloading CA bundle for server\n");
- if (setup_certs(ctx, tls_verify_certificates, tls_crl, NULL, &dummy_errstr)
- == OK)
+ if (setup_certs(ctx, &v_certs, tls_crl, NULL, &dummy_errstr) == OK)
state_server.lib_state.cabundle = TRUE;
- }
+
+ /* If we can, preload the server-side cert, key and ocsp */
+
+ if ( opt_set_and_noexpand(tls_certificate)
+# ifndef DISABLE_OCSP
+ && opt_unset_or_noexpand(tls_ocsp_file)
+# endif
+ && opt_unset_or_noexpand(tls_privatekey))
+ {
+ /* Set watches on the filenames. The implementation does de-duplication
+ so we can just blindly do them all. */
+
+ if ( tls_set_watch(tls_certificate, TRUE)
+# ifndef DISABLE_OCSP
+ && tls_set_watch(tls_ocsp_file, TRUE)
+# endif
+ && tls_set_watch(tls_privatekey, TRUE))
+ {
+ state_server.certificate = tls_certificate;
+ state_server.privatekey = tls_privatekey;
+#ifndef DISABLE_OCSP
+ state_server.u_ocsp.server.file = tls_ocsp_file;
+# endif
+
+ DEBUG(D_tls) debug_printf("TLS: preloading server certs\n");
+ if (tls_expand_session_files(ctx, &state_server, &dummy_errstr) == OK)
+ state_server.lib_state.conn_certs = TRUE;
+ }
+ }
+ else if ( !tls_certificate && !tls_privatekey
+# ifndef DISABLE_OCSP
+ && !tls_ocsp_file
+# endif
+ )
+ { /* Generate & preload a selfsigned cert. No files to watch. */
+ if (tls_expand_session_files(ctx, &state_server, &dummy_errstr) == OK)
+ {
+ state_server.lib_state.conn_certs = TRUE;
+ lifetime = f.running_in_test_harness ? 2 : 60 * 60; /* 1 hour */
+ }
+ }
+ else
+ DEBUG(D_tls) debug_printf("TLS: not preloading server certs\n");
+ }
}
else
DEBUG(D_tls) debug_printf("TLS: not preloading CA bundle for server\n");
+
+
#endif /* EXIM_HAVE_INOTIFY */
if (opt_set_and_noexpand(tls_require_ciphers))
{
DEBUG(D_tls) debug_printf("TLS: preloading cipher list for server\n");
+ normalise_ciphers(&tls_require_ciphers, tls_require_ciphers);
if (server_load_ciphers(ctx, &state_server, tls_require_ciphers,
&dummy_errstr) == OK)
state_server.lib_state.pri_string = TRUE;
tpt_dummy_state.lib_state = ob->tls_preload;
-if (opt_unset_or_noexpand(tls_dhparam))
- {
- DEBUG(D_tls) debug_printf("TLS: preloading DH params for transport '%s'\n", t->name);
- if (init_dh(ctx, tls_dhparam, NULL, &dummy_errstr))
- ob->tls_preload.dh = TRUE;
- }
-if (opt_unset_or_noexpand(tls_eccurve))
- {
- DEBUG(D_tls) debug_printf("TLS: preloading ECDH curve for transport '%s'\n", t->name);
- if (init_ecdh(ctx, NULL, &dummy_errstr))
- ob->tls_preload.ecdh = TRUE;
- }
-
#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
if ( opt_set_and_noexpand(ob->tls_certificate)
&& opt_unset_or_noexpand(ob->tls_privatekey))
&& tls_set_watch(ob->tls_crl, FALSE)
)
{
+ uschar * v_certs = ob->tls_verify_certificates;
DEBUG(D_tls)
debug_printf("TLS: preloading CA bundle for transport '%s'\n", t->name);
- if (setup_certs(ctx, ob->tls_verify_certificates,
+ if (setup_certs(ctx, &v_certs,
ob->tls_crl, dummy_host, &dummy_errstr) == OK)
ob->tls_preload.cabundle = TRUE;
}
#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
/* Invalidate the creds cached, by dropping the current ones.
Call when we notice one of the source files has changed. */
-
+
static void
tls_server_creds_invalidate(void)
{
SSL_CTX_free(state_server.lib_state.lib_ctx);
state_server.lib_state = null_tls_preload;
+#ifndef DISABLE_OCSP
+state_server.u_ocsp.server.file_expanded = NULL;
+#endif
}
/* Extreme debug
+ * */
#ifndef DISABLE_OCSP
-void
-x509_store_dump_cert_s_names(X509_STORE * store)
+static void
+debug_print_sn(const X509 * cert)
{
-STACK_OF(X509_OBJECT) * roots= store->objs;
+X509_NAME * sn = X509_get_subject_name((X509 *)cert);
static uschar name[256];
+if (X509_NAME_oneline(sn, CS name, sizeof(name)))
+ {
+ name[sizeof(name)-1] = '\0';
+ debug_printf(" %s\n", name);
+ }
+}
-for (int i= 0; i < sk_X509_OBJECT_num(roots); i++)
+static void
+x509_stack_dump_cert_s_names(const STACK_OF(X509) * sk)
+{
+if (!sk)
+ debug_printf(" (null)\n");
+else
{
- X509_OBJECT * tmp_obj= sk_X509_OBJECT_value(roots, i);
- if(tmp_obj->type == X509_LU_X509)
- {
- X509_NAME * sn = X509_get_subject_name(tmp_obj->data.x509);
- if (X509_NAME_oneline(sn, CS name, sizeof(name)))
- {
- name[sizeof(name)-1] = '\0';
- debug_printf(" %s\n", name);
- }
- }
+ int idx = sk_X509_num(sk);
+ if (!idx)
+ debug_printf(" (empty)\n");
+ else
+ while (--idx >= 0) debug_print_sn(sk_X509_value(sk, idx));
}
}
-#endif
+
+static void
+x509_store_dump_cert_s_names(X509_STORE * store)
+{
+# ifdef EXIM_HAVE_OPENSSL_X509_STORE_GET1_ALL_CERTS
+if (!store)
+ debug_printf(" (no store)\n");
+else
+ {
+ STACK_OF(X509) * sk = X509_STORE_get1_all_certs(store);
+ x509_stack_dump_cert_s_names(sk);
+ sk_X509_pop_free(sk, X509_free);
+ }
+# endif
+}
+#endif /*!DISABLE_OCSP*/
+/*
*/
const EVP_CIPHER * aes_cipher;
uschar aes_key[32]; /* size needed depends on cipher. aes_128 implies 128/8 = 16? */
+# if OPENSSL_VERSION_NUMBER < 0x30000000L
const EVP_MD * hmac_hash;
+# else
+ const uschar * hmac_hashname;
+# endif
uschar hmac_key[16];
time_t renew;
time_t expire;
exim_tk.name[0] = 'E';
exim_tk.aes_cipher = EVP_aes_256_cbc();
+# if OPENSSL_VERSION_NUMBER < 0x30000000L
exim_tk.hmac_hash = EVP_sha256();
+# else
+exim_tk.hmac_hashname = US "sha256";
+# endif
exim_tk.expire = t + ssl_session_timeout;
exim_tk.renew = t + ssl_session_timeout/2;
}
: NULL;
}
+
+static int
+tk_hmac_init(
+# if OPENSSL_VERSION_NUMBER < 0x30000000L
+ HMAC_CTX * hctx,
+#else
+ EVP_MAC_CTX * hctx,
+#endif
+ exim_stek * key
+ )
+{
+/*XXX will want these dependent on the ssl session strength */
+# if OPENSSL_VERSION_NUMBER < 0x30000000L
+ HMAC_Init_ex(hctx, key->hmac_key, sizeof(key->hmac_key),
+ key->hmac_hash, NULL);
+#else
+ {
+ OSSL_PARAM params[3];
+ uschar * hk = string_copy(key->hmac_hashname); /* need nonconst */
+ params[0] = OSSL_PARAM_construct_octet_string("key", key->hmac_key, sizeof(key->hmac_key));
+ params[1] = OSSL_PARAM_construct_utf8_string("digest", CS hk, 0);
+ params[2] = OSSL_PARAM_construct_end();
+ if (EVP_MAC_CTX_set_params(hctx, params) == 0)
+ {
+ DEBUG(D_tls) debug_printf("EVP_MAC_CTX_set_params: %s\n",
+ ERR_reason_error_string(ERR_get_error()));
+ return 0; /* error in mac initialisation */
+ }
+}
+#endif
+return 1;
+}
+
/* Callback for session tickets, on server */
static int
ticket_key_callback(SSL * ssl, uschar key_name[16],
- uschar * iv, EVP_CIPHER_CTX * c_ctx, HMAC_CTX * hctx, int enc)
+ uschar * iv, EVP_CIPHER_CTX * c_ctx,
+# if OPENSSL_VERSION_NUMBER < 0x30000000L
+ HMAC_CTX * hctx,
+#else
+ EVP_MAC_CTX * hctx,
+#endif
+ int enc)
{
tls_support * tlsp = state_server.tlsp;
exim_stek * key;
memcpy(key_name, key->name, 16);
DEBUG(D_tls) debug_printf("STEK expire " TIME_T_FMT "\n", key->expire - time(NULL));
- /*XXX will want these dependent on the ssl session strength */
- HMAC_Init_ex(hctx, key->hmac_key, sizeof(key->hmac_key),
- key->hmac_hash, NULL);
+ if (tk_hmac_init(hctx, key) == 0) return 0;
EVP_EncryptInit_ex(c_ctx, key->aes_cipher, NULL, key->aes_key, iv);
DEBUG(D_tls) debug_printf("ticket created\n");
return 0;
}
- HMAC_Init_ex(hctx, key->hmac_key, sizeof(key->hmac_key),
- key->hmac_hash, NULL);
+ if (tk_hmac_init(hctx, key) == 0) return 0;
EVP_DecryptInit_ex(c_ctx, key->aes_cipher, NULL, key->aes_key, iv);
DEBUG(D_tls) debug_printf("ticket usable, STEK expire " TIME_T_FMT "\n", key->expire - now);
return key->renew < now ? 2 : 1;
}
}
-#endif
+#endif /* !DISABLE_TLS_RESUME */
/* Make the extension value available for expansion */
store_pool = POOL_PERM;
-tls_in.sni = string_copy_taint(US servername, TRUE);
+tls_in.sni = string_copy_taint(US servername, GET_TAINTED);
store_pool = old_pool;
if (!reexpand_tls_files_for_sni)
/* Not sure how many of these are actually needed, since SSL object
already exists. Might even need this selfsame callback, for reneg? */
- {
+ {
SSL_CTX * ctx = state_server.lib_state.lib_ctx;
SSL_CTX_set_info_callback(server_sni, SSL_CTX_get_info_callback(ctx));
SSL_CTX_set_mode(server_sni, SSL_CTX_get_mode(ctx));
+#ifdef OPENSSL_MIN_PROTO_VERSION
+ SSL_CTX_set_min_proto_version(server_sni, SSL3_VERSION);
+#endif
SSL_CTX_set_options(server_sni, SSL_CTX_get_options(ctx));
+ SSL_CTX_clear_options(server_sni, ~SSL_CTX_get_options(ctx));
SSL_CTX_set_timeout(server_sni, SSL_CTX_get_timeout(ctx));
SSL_CTX_set_tlsext_servername_callback(server_sni, tls_servername_cb);
SSL_CTX_set_tlsext_servername_arg(server_sni, state);
- }
+ }
-if ( !init_dh(server_sni, state->dhparam, NULL, &dummy_errstr)
- || !init_ecdh(server_sni, NULL, &dummy_errstr)
+if ( !init_dh(server_sni, state->dhparam, &dummy_errstr)
+ || !init_ecdh(server_sni, &dummy_errstr)
)
goto bad;
#endif
{
- uschar * expcerts;
- if ( !expand_check(tls_verify_certificates, US"tls_verify_certificates",
- &expcerts, &dummy_errstr)
- || (rc = setup_certs(server_sni, expcerts, tls_crl, NULL,
+ uschar * v_certs = tls_verify_certificates;
+ if ((rc = setup_certs(server_sni, &v_certs, tls_crl, NULL,
&dummy_errstr)) != OK)
goto bad;
- if (expcerts && *expcerts)
+ if (v_certs && *v_certs)
setup_cert_verify(server_sni, FALSE, verify_callback_server);
}
static void
-time_print(BIO * bp, const char * str, ASN1_GENERALIZEDTIME * time)
+add_chain_to_store(X509_STORE * store, STACK_OF(X509) * sk,
+ const char * debug_text)
{
-BIO_printf(bp, "\t%s: ", str);
-ASN1_GENERALIZEDTIME_print(bp, time);
-BIO_puts(bp, "\n");
+int idx;
+
+DEBUG(D_tls)
+ {
+ debug_printf("chain for %s:\n", debug_text);
+ x509_stack_dump_cert_s_names(sk);
+ }
+if (sk)
+ if ((idx = sk_X509_num(sk)) > 0)
+ while (--idx >= 0)
+ X509_STORE_add_cert(store, sk_X509_value(sk, idx));
+
}
static int
-tls_client_stapling_cb(SSL *s, void *arg)
+tls_client_stapling_cb(SSL * ssl, void * arg)
{
exim_openssl_state_st * cbinfo = arg;
const unsigned char * p;
int i;
DEBUG(D_tls) debug_printf("Received TLS status callback (OCSP stapling):\n");
-len = SSL_get_tlsext_status_ocsp_resp(s, &p);
+len = SSL_get_tlsext_status_ocsp_resp(ssl, &p);
if(!p)
- {
- /* Expect this when we requested ocsp but got none */
+ { /* Expect this when we requested ocsp but got none */
+ if (SSL_session_reused(ssl) && tls_out.ocsp == OCSP_VFIED)
+ {
+ DEBUG(D_tls) debug_printf(" null, but resumed; ocsp vfy stored with session is good\n");
+ return 1;
+ }
+
if (cbinfo->u_ocsp.client.verify_required && LOGGING(tls_cipher))
log_write(0, LOG_MAIN, "Required TLS certificate status not received");
else
DEBUG(D_tls) debug_printf(" null\n");
- return cbinfo->u_ocsp.client.verify_required ? 0 : 1;
- }
+
+ if (!cbinfo->u_ocsp.client.verify_required)
+ return 1;
+ cbinfo->u_ocsp.client.verify_errstr =
+ US"(SSL_connect) Required TLS certificate status not received";
+ return 0;
+ }
if (!(rsp = d2i_OCSP_RESPONSE(NULL, &p, len)))
{
*/
{
BIO * bp = NULL;
+ X509_STORE * verify_store = NULL;
+ BOOL have_verified_OCSP_signer = FALSE;
#ifndef EXIM_HAVE_OCSP_RESP_COUNT
STACK_OF(OCSP_SINGLERESP) * sresp = bs->tbsResponseData->responses;
#endif
- DEBUG(D_tls) bp = BIO_new_fp(debug_file, BIO_NOCLOSE);
+ DEBUG(D_tls) bp = BIO_new(BIO_s_mem());
+
+ /* Use the CA & chain that verified the server cert to verify the stapled info */
+ /*XXX could we do an event here, for observability of ocsp? What reasonable data could we give access to? */
+ /* Dates would be a start. Do we need another opaque variable type, as for certs, plus an extract expansion? */
+
+ {
+ /* If this routine is not available, we've avoided [in tls_client_start()]
+ asking for certificate-status under DANE, so this callback won't run for
+ that combination. It still will for non-DANE. */
- /*OCSP_RESPONSE_print(bp, rsp, 0); extreme debug: stapling content */
+#ifdef EXIM_HAVE_OPENSSL_OCSP_RESP_GET0_SIGNER
+ X509 * signer;
- /* Use the chain that verified the server cert to verify the stapled info */
- /* DEBUG(D_tls) x509_store_dump_cert_s_names(cbinfo->u_ocsp.client.verify_store); */
+ if ( tls_out.dane_verified
+ && (have_verified_OCSP_signer =
+ OCSP_resp_get0_signer(bs, &signer, SSL_get0_verified_chain(ssl)) == 1))
+ {
+ DEBUG(D_tls)
+ debug_printf("signer for OCSP basicres is in the verified chain;"
+ " shortcut its verification\n");
+ }
+ else
+#endif
+ {
+ STACK_OF(X509) * verified_chain;
+
+ verify_store = X509_STORE_new();
+
+ SSL_get0_chain_certs(ssl, &verified_chain);
+ add_chain_to_store(verify_store, verified_chain,
+ "'current cert' per SSL_get0_chain_certs()");
+#ifdef EXIM_HAVE_SSL_GET0_VERIFIED_CHAIN
+ verified_chain = SSL_get0_verified_chain(ssl);
+ add_chain_to_store(verify_store, verified_chain,
+ "SSL_get0_verified_chain()");
+#endif
+ }
+ }
- if ((i = OCSP_basic_verify(bs, cbinfo->verify_stack,
- cbinfo->u_ocsp.client.verify_store, OCSP_NOEXPLICIT)) <= 0)
+ DEBUG(D_tls)
+ {
+ debug_printf("Untrusted intermediate cert stack (from SSL_get_peer_cert_chain()):\n");
+ x509_stack_dump_cert_s_names(SSL_get_peer_cert_chain(ssl));
+
+ debug_printf("will use this CA store for verifying basicresp:\n");
+ x509_store_dump_cert_s_names(verify_store);
+
+ /* OCSP_RESPONSE_print(bp, rsp, 0); extreme debug: stapling content */
+
+ debug_printf("certs contained in basicresp:\n");
+ x509_stack_dump_cert_s_names(
+#ifdef EXIM_HAVE_OPESSL_OCSP_RESP_GET0_CERTS
+ OCSP_resp_get0_certs(bs)
+#else
+ bs->certs
+#endif
+ );
+
+#ifdef EXIM_HAVE_OPENSSL_X509_STORE_GET1_ALL_CERTS
+/* could do via X509_STORE_get0_objects(); not worth it just for debug info */
+ {
+ X509 * signer;
+ if (OCSP_resp_get0_signer(bs, &signer, X509_STORE_get1_all_certs(verify_store)) == 1)
+ {
+ debug_printf("found signer for basicres:\n");
+ debug_print_sn(signer);
+ }
+ else
+ {
+ debug_printf("failed to find signer for basicres:\n");
+ ERR_print_errors(bp);
+ }
+ }
+#endif
+
+ }
+
+ ERR_clear_error();
+
+ /* Under DANE the trust-anchor (at least in TA mode) is indicated by the TLSA
+ record in DNS, and probably is not the root of the chain of certificates. So
+ accept a partial chain for that case (and hope that anchor is visible for
+ verifying the OCSP stapling).
+ XXX for EE mode it won't even be that. Does that make OCSP useless for EE?
+
+ Worse, for LetsEncrypt-mode (ocsp signer is leaf-signer) under DANE, the
+ data used within OpenSSL for the signer has nil pointers for signing
+ algorithms - and a crash results. Avoid this by shortcutting verification,
+ having determined that the OCSP signer is in the (DANE-)validated set.
+ */
+
+#ifndef OCSP_PARTIAL_CHAIN /* defined for 3.0.0 onwards */
+# define OCSP_PARTIAL_CHAIN 0
+#endif
+
+ if ((i = OCSP_basic_verify(bs, SSL_get_peer_cert_chain(ssl),
+ verify_store,
+#ifdef SUPPORT_DANE
+ tls_out.dane_verified
+ ? have_verified_OCSP_signer
+ ? OCSP_NOVERIFY | OCSP_NOEXPLICIT
+ : OCSP_PARTIAL_CHAIN | OCSP_NOEXPLICIT
+ :
+#endif
+ OCSP_NOEXPLICIT)) <= 0)
+ {
+ DEBUG(D_tls) debug_printf("OCSP_basic_verify() fail: returned %d\n", i);
if (ERR_peek_error())
{
tls_out.ocsp = OCSP_FAILED;
- if (LOGGING(tls_cipher)) log_write(0, LOG_MAIN,
- "Received TLS cert status response, itself unverifiable: %s",
- ERR_reason_error_string(ERR_peek_error()));
- BIO_printf(bp, "OCSP response verify failure\n");
- ERR_print_errors(bp);
- OCSP_RESPONSE_print(bp, rsp, 0);
+ if (LOGGING(tls_cipher))
+ {
+ static uschar peerdn[256];
+ const uschar * errstr;;
+
+#if OPENSSL_VERSION_NUMBER >= 0x30000000L
+ ERR_peek_error_all(NULL, NULL, NULL, CCSS &errstr, NULL);
+ if (!errstr)
+#endif
+ errstr = CUS ERR_reason_error_string(ERR_peek_error());
+
+ X509_NAME_oneline(X509_get_subject_name(SSL_get_peer_certificate(ssl)),
+ CS peerdn, sizeof(peerdn));
+ log_write(0, LOG_MAIN,
+ "[%s] %s Received TLS cert (DN: '%.*s') status response, "
+ "itself unverifiable: %s",
+ deliver_host_address, deliver_host,
+ (int)sizeof(peerdn), peerdn, errstr);
+ }
+ DEBUG(D_tls)
+ {
+ BIO_printf(bp, "OCSP response verify failure\n");
+ ERR_print_errors(bp);
+ {
+ uschar * s = NULL;
+ int len = (int) BIO_get_mem_data(bp, CSS &s);
+ if (len > 0) debug_printf("%.*s", len, s);
+ BIO_reset(bp);
+ }
+ OCSP_RESPONSE_print(bp, rsp, 0);
+ }
goto failed;
}
else
DEBUG(D_tls) debug_printf("no explicit trust for OCSP signing"
" in the root CA certificate; ignoring\n");
+ }
DEBUG(D_tls) debug_printf("OCSP response well-formed and signed OK\n");
status = OCSP_single_get0_status(single, &reason, &rev,
&thisupd, &nextupd);
- DEBUG(D_tls) time_print(bp, "This OCSP Update", thisupd);
- DEBUG(D_tls) if(nextupd) time_print(bp, "Next OCSP Update", nextupd);
+ DEBUG(D_tls)
+ {
+ time_print(bp, "This OCSP Update", thisupd);
+ if (nextupd) time_print(bp, "Next OCSP Update", nextupd);
+ }
if (!OCSP_check_validity(thisupd, nextupd,
EXIM_OCSP_SKEW_SECONDS, EXIM_OCSP_MAX_AGE))
{
tls_out.ocsp = OCSP_FAILED;
DEBUG(D_tls) ERR_print_errors(bp);
- log_write(0, LOG_MAIN, "Server OSCP dates invalid");
+ cbinfo->u_ocsp.client.verify_errstr =
+ US"(SSL_connect) Server certificate status is out-of-date";
+ log_write(0, LOG_MAIN, "OCSP dates invalid");
goto failed;
}
case V_OCSP_CERTSTATUS_GOOD:
continue; /* the idx loop */
case V_OCSP_CERTSTATUS_REVOKED:
+ cbinfo->u_ocsp.client.verify_errstr =
+ US"(SSL_connect) Server certificate revoked";
log_write(0, LOG_MAIN, "Server certificate revoked%s%s",
reason != -1 ? "; reason: " : "",
reason != -1 ? OCSP_crl_reason_str(reason) : "");
DEBUG(D_tls) time_print(bp, "Revocation Time", rev);
break;
default:
+ cbinfo->u_ocsp.client.verify_errstr =
+ US"(SSL_connect) Server certificate has unknown status";
log_write(0, LOG_MAIN,
"Server certificate status unknown, in OCSP stapling");
break;
tls_out.ocsp = OCSP_FAILED;
i = cbinfo->u_ocsp.client.verify_required ? 0 : 1;
good:
+ {
+ uschar * s = NULL;
+ int len = (int) BIO_get_mem_data(bp, CSS &s);
+ if (len > 0) debug_printf("%.*s", len, s);
+ }
BIO_free(bp);
}
uschar *ocsp_file,
#endif
address_item *addr, exim_openssl_state_st ** caller_state,
- tls_support * tlsp,
- uschar ** errstr)
+ tls_support * tlsp, uschar ** errstr)
{
SSL_CTX * ctx;
exim_openssl_state_st * state;
}
#endif
- DEBUG(D_tls) debug_printf("setting SSL CTX options: %#lx\n", init_options);
- if (!(SSL_CTX_set_options(ctx, init_options)))
- return tls_error(string_sprintf(
+#ifdef OPENSSL_MIN_PROTO_VERSION
+ SSL_CTX_set_min_proto_version(ctx, SSL3_VERSION);
+#endif
+ DEBUG(D_tls) debug_printf("setting SSL CTX options: %016lx\n", init_options);
+ SSL_CTX_set_options(ctx, init_options);
+ {
+ uint64_t readback = SSL_CTX_clear_options(ctx, ~init_options);
+ if (readback != init_options)
+ return tls_error(string_sprintf(
"SSL_CTX_set_option(%#lx)", init_options), host, NULL, errstr);
+ }
}
else
DEBUG(D_tls) debug_printf("no SSL CTX options to set\n");
/* Initialize with DH parameters if supplied */
/* Initialize ECDH temp key parameter selection */
-if (state->lib_state.dh)
- { DEBUG(D_tls) debug_printf("TLS: DH params were preloaded\n"); }
-else
- if (!init_dh(ctx, state->dhparam, host, errstr)) return DEFER;
+if (!host)
+ {
+ if (state->lib_state.dh)
+ { DEBUG(D_tls) debug_printf("TLS: DH params were preloaded\n"); }
+ else
+ if (!init_dh(ctx, state->dhparam, errstr)) return DEFER;
-if (state->lib_state.ecdh)
- { DEBUG(D_tls) debug_printf("TLS: ECDH curve was preloaded\n"); }
-else
- if (!init_ecdh(ctx, host, errstr)) return DEFER;
+ if (state->lib_state.ecdh)
+ { DEBUG(D_tls) debug_printf("TLS: ECDH curve was preloaded\n"); }
+ else
+ if (!init_ecdh(ctx, errstr)) return DEFER;
+ }
/* Set up certificate and key (and perhaps OCSP info) */
else
{
#ifndef DISABLE_OCSP
- if (!host)
+ if (!host) /* server */
{
state->u_ocsp.server.file = ocsp_file;
state->u_ocsp.server.file_expanded = NULL;
#ifdef EXIM_HAVE_OPENSSL_TLSEXT
# ifndef DISABLE_OCSP
- if (!(state->verify_stack = sk_X509_new_null()))
+ if (!host && !(state->u_ocsp.server.verify_stack = sk_X509_new_null()))
{
DEBUG(D_tls) debug_printf("failed to create stack for stapling verify\n");
return FAIL;
DEBUG(D_tls) debug_printf("failed to create store for stapling verify\n");
return FAIL;
}
+
SSL_CTX_set_tlsext_status_cb(ctx, tls_client_stapling_cb);
SSL_CTX_set_tlsext_status_arg(ctx, state);
}
# endif
-#endif
+#endif /*EXIM_HAVE_OPENSSL_TLSEXT*/
state->verify_cert_hostnames = NULL;
*************************************************/
#ifndef DISABLE_OCSP
-/* Load certs from file, return TRUE on success */
+/* In the server, load certs from file, return TRUE on success */
static BOOL
chain_from_pem_file(const uschar * file, STACK_OF(X509) ** vp)
Arguments:
sctx SSL_CTX* to initialise
- certs certs file, expanded
+ certsp certs file, returned expanded
crl CRL file or NULL
host NULL in a server; the remote host in a client
errstr error string pointer
*/
static int
-setup_certs(SSL_CTX *sctx, uschar *certs, uschar *crl, host_item *host,
+setup_certs(SSL_CTX * sctx, uschar ** certsp, uschar * crl, host_item * host,
uschar ** errstr)
{
-uschar *expcerts, *expcrl;
+uschar * expcerts, * expcrl;
-if (!expand_check(certs, US"tls_verify_certificates", &expcerts, errstr))
+if (!expand_check(*certsp, US"tls_verify_certificates", &expcerts, errstr))
return DEFER;
DEBUG(D_tls) debug_printf("tls_verify_certificates: %s\n", expcerts);
+*certsp = expcerts;
if (expcerts && *expcerts)
{
/* Tell the library to use its compiled-in location for the system default
{
STACK_OF(X509) * verify_stack =
#ifndef DISABLE_OCSP
- !host ? state_server.verify_stack :
+ !host ? state_server.u_ocsp.server.verify_stack :
#endif
NULL;
STACK_OF(X509) ** vp = &verify_stack;
file = expcerts; dir = NULL;
#ifndef DISABLE_OCSP
- /* In the server if we will be offering an OCSP proof, load chain from
+ /* In the server if we will be offering an OCSP proof; load chain from
file for verifying the OCSP proof at load time. */
/*XXX Glitch! The file here is tls_verify_certs: the chain for verifying the client cert.
This is inconsistent with the need to verify the OCSP proof of the server cert.
*/
+/* *debug_printf("file for checking server ocsp stapling is: %s\n", file); */
if ( !host
&& statbuf.st_size > 0
&& state_server.u_ocsp.server.file
+static void
+tls_dump_keylog(SSL * ssl)
+{
+#ifdef EXIM_HAVE_OPENSSL_KEYLOG
+ BIO * bp = BIO_new(BIO_s_mem());
+ uschar * s = NULL;
+ int len;
+ SSL_SESSION_print_keylog(bp, SSL_get_session(ssl));
+ len = (int) BIO_get_mem_data(bp, CSS &s);
+ if (len > 0) debug_printf("%.*s", len, s);
+ BIO_free(bp);
+#endif
+}
+
+
+/* Channel-binding info for authenticators
+See description in https://paquier.xyz/postgresql-2/channel-binding-openssl/
+for pre-TLS1.3
+*/
+
+static void
+tls_get_channel_binding(SSL * ssl, tls_support * tlsp, const void * taintval)
+{
+uschar c, * s;
+size_t len;
+
+#ifdef EXIM_HAVE_EXPORT_CHNL_BNGNG
+if (SSL_version(ssl) > TLS1_2_VERSION)
+ {
+ /* It's not documented by OpenSSL how big the output buffer must be.
+ The OpenSSL testcases use 80 bytes but don't say why. The GnuTLS impl only
+ serves out 32B. RFC 9266 says it is 32B.
+ Interop fails unless we use the same each end. */
+ len = 32;
+
+ tlsp->channelbind_exporter = TRUE;
+ taintval = GET_UNTAINTED;
+ if (SSL_export_keying_material(ssl,
+ s = store_get((int)len, taintval), len,
+ "EXPORTER-Channel-Binding", (size_t) 24,
+ NULL, 0, 0) != 1)
+ len = 0;
+ }
+else
+#endif
+ {
+ len = SSL_get_peer_finished(ssl, &c, 0);
+ len = SSL_get_peer_finished(ssl, s = store_get((int)len, taintval), len);
+ }
+
+if (len > 0)
+ {
+ int old_pool = store_pool;
+ store_pool = POOL_PERM;
+ tlsp->channelbinding = b64encode_taint(CUS s, (int)len, taintval);
+ store_pool = old_pool;
+ DEBUG(D_tls) debug_printf("Have channel bindings cached for possible auth usage %p %p\n", tlsp->channelbinding, tlsp);
+ }
+}
+
+
/*************************************************
* Start a TLS session in a server *
*************************************************/
if (state_server.lib_state.pri_string)
{ DEBUG(D_tls) debug_printf("TLS: cipher list was preloaded\n"); }
-else
+else
{
if (!expand_check(tls_require_ciphers, US"tls_require_ciphers", &expciphers, errstr))
return FAIL;
- if ( expciphers
- && (rc = server_load_ciphers(ctx, &state_server, expciphers, errstr)) != OK)
- return rc;
+ if (expciphers)
+ {
+ normalise_ciphers(&expciphers, tls_require_ciphers);
+ if ((rc = server_load_ciphers(ctx, &state_server, expciphers, errstr)) != OK)
+ return rc;
+ }
}
/* If this is a host for which certificate verification is mandatory or
goto skip_certs;
{
- uschar * expcerts;
- if (!expand_check(tls_verify_certificates, US"tls_verify_certificates",
- &expcerts, errstr))
- return DEFER;
- DEBUG(D_tls) debug_printf("tls_verify_certificates: %s\n", expcerts);
+ uschar * v_certs = tls_verify_certificates;
if (state_server.lib_state.cabundle)
- { DEBUG(D_tls) debug_printf("TLS: CA bundle for server was preloaded\n"); }
+ {
+ DEBUG(D_tls) debug_printf("TLS: CA bundle for server was preloaded\n");
+ setup_cert_verify(ctx, server_verify_optional, verify_callback_server);
+ }
else
- if ((rc = setup_certs(ctx, expcerts, tls_crl, NULL, errstr)) != OK)
+ {
+ if ((rc = setup_certs(ctx, &v_certs, tls_crl, NULL, errstr)) != OK)
return rc;
-
- if (expcerts && *expcerts)
- setup_cert_verify(ctx, server_verify_optional, verify_callback_server);
+ if (v_certs && *v_certs)
+ setup_cert_verify(ctx, server_verify_optional, verify_callback_server);
+ }
}
skip_certs: ;
#ifndef DISABLE_TLS_RESUME
+# if OPENSSL_VERSION_NUMBER < 0x30000000L
SSL_CTX_set_tlsext_ticket_key_cb(ctx, ticket_key_callback);
/* despite working, appears to always return failure, so ignoring */
+# else
+SSL_CTX_set_tlsext_ticket_key_evp_cb(ctx, ticket_key_callback);
+/* despite working, appears to always return failure, so ignoring */
+# endif
#endif
+
#ifdef OPENSSL_HAVE_NUM_TICKETS
# ifndef DISABLE_TLS_RESUME
SSL_CTX_set_num_tickets(ctx, tls_in.host_resumable ? 1 : 0);
case SSL_ERROR_ZERO_RETURN:
DEBUG(D_tls) debug_printf("Got SSL_ERROR_ZERO_RETURN\n");
(void) tls_error(US"SSL_accept", NULL, sigalrm_seen ? US"timed out" : NULL, errstr);
-
+#ifndef DISABLE_EVENT
+ (void) event_raise(event_action, US"tls:fail:connect", *errstr, NULL);
+#endif
if (SSL_get_shutdown(ssl) == SSL_RECEIVED_SHUTDOWN)
- SSL_shutdown(ssl);
+ SSL_shutdown(ssl);
tls_close(NULL, TLS_NO_SHUTDOWN);
return FAIL;
|| r == SSL_R_VERSION_TOO_LOW
#endif
|| r == SSL_R_UNKNOWN_PROTOCOL || r == SSL_R_UNSUPPORTED_PROTOCOL)
- s = string_sprintf("%s (%s)", s, SSL_get_version(ssl));
+ s = string_sprintf("(%s)", SSL_get_version(ssl));
(void) tls_error(US"SSL_accept", NULL, sigalrm_seen ? US"timed out" : s, errstr);
+#ifndef DISABLE_EVENT
+ (void) event_raise(event_action, US"tls:fail:connect", *errstr, NULL);
+#endif
return FAIL;
}
if (!errno)
{
*errstr = US"SSL_accept: TCP connection closed by peer";
+#ifndef DISABLE_EVENT
+ (void) event_raise(event_action, US"tls:fail:connect", *errstr, NULL);
+#endif
return FAIL;
}
DEBUG(D_tls) debug_printf(" - syscall %s\n", strerror(errno));
sigalrm_seen ? US"timed out"
: ERR_peek_error() ? NULL : string_sprintf("ret %d", error),
errstr);
+#ifndef DISABLE_EVENT
+ (void) event_raise(event_action, US"tls:fail:connect", *errstr, NULL);
+#endif
return FAIL;
}
}
adjust the input functions to read via TLS, and initialize things. */
#ifdef SSL_get_extms_support
+/*XXX what does this return for tls1.3 ? */
tls_in.ext_master_secret = SSL_get_extms_support(ssl) == 1;
#endif
peer_cert(ssl, &tls_in, peerdn, sizeof(peerdn));
if (SSL_get_shared_ciphers(ssl, CS buf, sizeof(buf)))
debug_printf("Shared ciphers: %s\n", buf);
-#ifdef EXIM_HAVE_OPENSSL_KEYLOG
- {
- BIO * bp = BIO_new_fp(debug_file, BIO_NOCLOSE);
- SSL_SESSION_print_keylog(bp, SSL_get_session(ssl));
- BIO_free(bp);
- }
-#endif
+ tls_dump_keylog(ssl);
#ifdef EXIM_HAVE_SESSION_TICKET
{
tls_in.ourcert = crt ? X509_dup(crt) : NULL;
}
-/* Channel-binding info for authenticators
-See description in https://paquier.xyz/postgresql-2/channel-binding-openssl/ */
- {
- uschar c, * s;
- size_t len = SSL_get_peer_finished(ssl, &c, 0);
- int old_pool = store_pool;
-
- SSL_get_peer_finished(ssl, s = store_get((int)len, FALSE), len);
- store_pool = POOL_PERM;
- tls_in.channelbinding = b64encode_taint(CUS s, (int)len, FALSE);
- store_pool = old_pool;
- DEBUG(D_tls) debug_printf("Have channel bindings cached for possible auth usage %p\n", tls_in.channelbinding);
- }
+tls_get_channel_binding(ssl, &tls_in, GET_UNTAINTED);
/* Only used by the server-side tls (tls_in), including tls_getc.
Client-side (tls_out) reads (seem to?) go via
return OK;
{
- uschar * expcerts;
- if (!expand_check(ob->tls_verify_certificates, US"tls_verify_certificates",
- &expcerts, errstr))
- return DEFER;
- DEBUG(D_tls) debug_printf("tls_verify_certificates: %s\n", expcerts);
+ uschar * v_certs = ob->tls_verify_certificates;
if (state->lib_state.cabundle)
- { DEBUG(D_tls) debug_printf("TLS: CA bundle was preloaded\n"); }
+ {
+ DEBUG(D_tls) debug_printf("TLS: CA bundle for tpt was preloaded\n");
+ setup_cert_verify(ctx, client_verify_optional, verify_callback_client);
+ }
else
- if ((rc = setup_certs(ctx, expcerts, ob->tls_crl, host, errstr)) != OK)
+ {
+ if ((rc = setup_certs(ctx, &v_certs, ob->tls_crl, host, errstr)) != OK)
return rc;
-
- if (expcerts && *expcerts)
- setup_cert_verify(ctx, client_verify_optional, verify_callback_client);
+ if (v_certs && *v_certs)
+ setup_cert_verify(ctx, client_verify_optional, verify_callback_client);
+ }
}
if (verify_check_given_host(CUSS &ob->tls_verify_cert_hostnames, host) == OK)
and apply it to the ssl-connection for attempted resumption. */
static void
-tls_retrieve_session(tls_support * tlsp, SSL * ssl, const uschar * key)
+tls_retrieve_session(tls_support * tlsp, SSL * ssl)
{
-tlsp->resumption |= RESUME_SUPPORTED;
if (tlsp->host_resumable)
{
dbdata_tls_session * dt;
open_db dbblock, * dbm_file;
tlsp->resumption |= RESUME_CLIENT_REQUESTED;
- DEBUG(D_tls) debug_printf("checking for resumable session for %s\n", key);
+ DEBUG(D_tls)
+ debug_printf("checking for resumable session for %s\n", tlsp->resume_index);
if ((dbm_file = dbfn_open(US"tls", O_RDWR, &dbblock, FALSE, FALSE)))
{
- /* key for the db is the IP */
- if ((dt = dbfn_read_with_length(dbm_file, key, &len)))
+ if ((dt = dbfn_read_with_length(dbm_file, tlsp->resume_index, &len)))
{
SSL_SESSION * ss = NULL;
const uschar * sess_asn1 = dt->session;
if (lifetime + dt->time_stamp < time(NULL))
{
DEBUG(D_tls) debug_printf("session expired\n");
- dbfn_delete(dbm_file, key);
- }
- else if (!SSL_set_session(ssl, ss))
- {
- DEBUG(D_tls)
- {
- ERR_error_string_n(ERR_get_error(),
- ssl_errstring, sizeof(ssl_errstring));
- debug_printf("applying session to ssl: %s\n", ssl_errstring);
- }
+ dbfn_delete(dbm_file, tlsp->resume_index);
}
- else
+ else if (SSL_set_session(ssl, ss))
{
DEBUG(D_tls) debug_printf("good session\n");
tlsp->resumption |= RESUME_CLIENT_SUGGESTED;
tlsp->verify_override = dt->verify_override;
tlsp->ocsp = dt->ocsp;
}
+ else DEBUG(D_tls)
+ {
+ ERR_error_string_n(ERR_get_error(),
+ ssl_errstring, sizeof(ssl_errstring));
+ debug_printf("applying session to ssl: %s\n", ssl_errstring);
+ }
}
}
else
{
int len = i2d_SSL_SESSION(ss, NULL);
int dlen = sizeof(dbdata_tls_session) + len;
- dbdata_tls_session * dt = store_get(dlen, TRUE);
+ dbdata_tls_session * dt = store_get(dlen, GET_TAINTED);
uschar * s = dt->session;
open_db dbblock, * dbm_file;
if ((dbm_file = dbfn_open(US"tls", O_RDWR, &dbblock, FALSE, FALSE)))
{
- const uschar * key = cbinfo->host->address;
- dbfn_delete(dbm_file, key);
- dbfn_write(dbm_file, key, dt, dlen);
+ dbfn_write(dbm_file, tlsp->resume_index, dt, dlen);
dbfn_close(dbm_file);
DEBUG(D_tls) debug_printf("wrote session (len %u) to db\n",
(unsigned)dlen);
}
+/* Construct a key for session DB lookup, and setup the SSL_CTX for resumption */
+
static void
tls_client_ctx_resume_prehandshake(
- exim_openssl_client_tls_ctx * exim_client_ctx, tls_support * tlsp,
- smtp_transport_options_block * ob, host_item * host)
+ exim_openssl_client_tls_ctx * exim_client_ctx, smtp_connect_args * conn_args,
+ tls_support * tlsp, smtp_transport_options_block * ob)
{
-/* Should the client request a session resumption ticket? */
-if (verify_check_given_host(CUSS &ob->tls_resumption_hosts, host) == OK)
- {
- tlsp->host_resumable = TRUE;
+tlsp->host_resumable = TRUE;
+tls_client_resmption_key(tlsp, conn_args, ob);
- SSL_CTX_set_session_cache_mode(exim_client_ctx->ctx,
- SSL_SESS_CACHE_CLIENT
- | SSL_SESS_CACHE_NO_INTERNAL | SSL_SESS_CACHE_NO_AUTO_CLEAR);
- SSL_CTX_sess_set_new_cb(exim_client_ctx->ctx, tls_save_session_cb);
- }
+SSL_CTX_set_session_cache_mode(exim_client_ctx->ctx,
+ SSL_SESS_CACHE_CLIENT
+ | SSL_SESS_CACHE_NO_INTERNAL | SSL_SESS_CACHE_NO_AUTO_CLEAR);
+SSL_CTX_sess_set_new_cb(exim_client_ctx->ctx, tls_save_session_cb);
}
static BOOL
tlsp->resumption = RESUME_SUPPORTED;
/* Pick up a previous session, saved on an old ticket */
-tls_retrieve_session(tlsp, ssl, host->address);
+tls_retrieve_session(tlsp, ssl);
return TRUE;
}
#ifdef EXIM_HAVE_ALPN
/* Expand and convert an Exim list to an ALPN list. False return for fail.
NULL plist return for silent no-ALPN.
+
+Overwite the passed-in list with the expanded version.
*/
static BOOL
-tls_alpn_plist(const uschar * tls_alpn, const uschar ** plist, unsigned * plen,
+tls_alpn_plist(uschar ** tls_alpn, const uschar ** plist, unsigned * plen,
uschar ** errstr)
{
uschar * exp_alpn;
-if (!expand_check(tls_alpn, US"tls_alpn", &exp_alpn, errstr))
+if (!expand_check(*tls_alpn, US"tls_alpn", &exp_alpn, errstr))
return FALSE;
+*tls_alpn = exp_alpn;
if (!exp_alpn)
{
but it's little extra code complexity in the client. */
const uschar * list = exp_alpn;
- uschar * p = store_get(Ustrlen(exp_alpn), is_tainted(exp_alpn)), * s, * t;
+ uschar * p = store_get(Ustrlen(exp_alpn), exp_alpn), * s, * t;
int sep = 0;
uschar len;
rc = store_pool;
store_pool = POOL_PERM;
-exim_client_ctx = store_get(sizeof(exim_openssl_client_tls_ctx), FALSE);
+exim_client_ctx = store_get(sizeof(exim_openssl_client_tls_ctx), GET_UNTAINTED);
exim_client_ctx->corked = NULL;
store_pool = rc;
#ifndef DISABLE_OCSP
{
# ifdef SUPPORT_DANE
- /*XXX this should be moved to caller, to be common across gnutls/openssl */
if ( conn_args->dane
&& ob->hosts_request_ocsp[0] == '*'
&& ob->hosts_request_ocsp[1] == '\0'
# endif
request_ocsp =
verify_check_given_host(CUSS &ob->hosts_request_ocsp, host) == OK;
+
+# if defined(SUPPORT_DANE) && !defined(EXIM_HAVE_OPENSSL_OCSP_RESP_GET0_SIGNER)
+ if (conn_args->dane && (require_ocsp || request_ocsp))
+ {
+ DEBUG(D_tls) debug_printf("OpenSSL version to early to combine OCSP"
+ " and DANE; disabling OCSP\n");
+ require_ocsp = request_ocsp = FALSE;
+ }
+# endif
}
#endif
return FALSE;
if (expciphers && *expciphers == '\0')
expciphers = NULL;
+
+ normalise_ciphers(&expciphers, ob->dane_require_tls_ciphers);
}
#endif
-if (!expciphers &&
- !expand_check(ob->tls_require_ciphers, US"tls_require_ciphers",
+if (!expciphers)
+ {
+ if (!expand_check(ob->tls_require_ciphers, US"tls_require_ciphers",
&expciphers, errstr))
- return FALSE;
+ return FALSE;
-/* In OpenSSL, cipher components are separated by hyphens. In GnuTLS, they
-are separated by underscores. So that I can use either form in my tests, and
-also for general convenience, we turn underscores into hyphens here. */
+ /* In OpenSSL, cipher components are separated by hyphens. In GnuTLS, they
+ are separated by underscores. So that I can use either form in my tests, and
+ also for general convenience, we turn underscores into hyphens here. */
+
+ normalise_ciphers(&expciphers, ob->tls_require_ciphers);
+ }
if (expciphers)
{
- uschar *s = expciphers;
- while (*s) { if (*s == '_') *s = '-'; s++; }
DEBUG(D_tls) debug_printf("required ciphers: %s\n", expciphers);
if (!SSL_CTX_set_cipher_list(exim_client_ctx->ctx, CS expciphers))
{
tls_error(US"context init", host, NULL, errstr);
return FALSE;
}
+ DEBUG(D_tls) debug_printf("since dane-mode conn, not loading the usual CA bundle\n");
}
else
client_static_state, errstr) != OK)
return FALSE;
-#ifndef DISABLE_TLS_RESUME
-tls_client_ctx_resume_prehandshake(exim_client_ctx, tlsp, ob, host);
-#endif
-
-
-if (!(exim_client_ctx->ssl = SSL_new(exim_client_ctx->ctx)))
- {
- tls_error(US"SSL_new", host, NULL, errstr);
- return FALSE;
- }
-SSL_set_session_id_context(exim_client_ctx->ssl, sid_ctx, Ustrlen(sid_ctx));
-
-SSL_set_fd(exim_client_ctx->ssl, cctx->sock);
-SSL_set_connect_state(exim_client_ctx->ssl);
-
if (ob->tls_sni)
{
if (!expand_check(ob->tls_sni, US"tls_sni", &tlsp->sni, errstr))
return FALSE;
if (!tlsp->sni)
- {
- DEBUG(D_tls) debug_printf("Setting TLS SNI forced to fail, not sending\n");
- }
+ { DEBUG(D_tls) debug_printf("Setting TLS SNI forced to fail, not sending\n"); }
else if (!Ustrlen(tlsp->sni))
tlsp->sni = NULL;
else
{
-#ifdef EXIM_HAVE_OPENSSL_TLSEXT
- DEBUG(D_tls) debug_printf("Setting TLS SNI \"%s\"\n", tlsp->sni);
- SSL_set_tlsext_host_name(exim_client_ctx->ssl, tlsp->sni);
-#else
+#ifndef EXIM_HAVE_OPENSSL_TLSEXT
log_write(0, LOG_MAIN, "SNI unusable with this OpenSSL library version; ignoring \"%s\"\n",
tlsp->sni);
+ tlsp->sni = NULL;
#endif
}
}
const uschar * plist;
unsigned plen;
- if (!tls_alpn_plist(ob->tls_alpn, &plist, &plen, errstr))
+ if (!tls_alpn_plist(&ob->tls_alpn, &plist, &plen, errstr))
return FALSE;
if (plist)
- if (SSL_set_alpn_protos(exim_client_ctx->ssl, plist, plen) != 0)
+ if (SSL_CTX_set_alpn_protos(exim_client_ctx->ctx, plist, plen) != 0)
{
tls_error(US"alpn init", host, NULL, errstr);
return FALSE;
ob->tls_alpn);
#endif
+#ifndef DISABLE_TLS_RESUME
+/*XXX have_lbserver: another cmdline arg possibly, for continued-conn, but use
+will be very low. */
+
+if (!conn_args->have_lbserver) /* wanted for tls_client_resmption_key() */
+ { DEBUG(D_tls) debug_printf("resumption not supported on continued-connection\n"); }
+else if (verify_check_given_host(CUSS &ob->tls_resumption_hosts, host) == OK)
+ tls_client_ctx_resume_prehandshake(exim_client_ctx, conn_args, tlsp, ob);
+#endif
+
+
+if (!(exim_client_ctx->ssl = SSL_new(exim_client_ctx->ctx)))
+ {
+ tls_error(US"SSL_new", host, NULL, errstr);
+ return FALSE;
+ }
+SSL_set_session_id_context(exim_client_ctx->ssl, sid_ctx, Ustrlen(sid_ctx));
+SSL_set_fd(exim_client_ctx->ssl, cctx->sock);
+SSL_set_connect_state(exim_client_ctx->ssl);
+
+#ifdef EXIM_HAVE_OPENSSL_TLSEXT
+if (tlsp->sni)
+ {
+ DEBUG(D_tls) debug_printf("Setting TLS SNI \"%s\"\n", tlsp->sni);
+ SSL_set_tlsext_host_name(exim_client_ctx->ssl, tlsp->sni);
+ }
+#endif
+
#ifdef SUPPORT_DANE
if (conn_args->dane)
if (dane_tlsa_load(exim_client_ctx->ssl, host, &conn_args->tlsa_dnsa, errstr) != OK)
if (rc <= 0)
{
- tls_error(US"SSL_connect", host, sigalrm_seen ? US"timed out" : NULL, errstr);
+#ifndef DISABLE_OCSP
+ if (client_static_state->u_ocsp.client.verify_errstr)
+ { if (errstr) *errstr = client_static_state->u_ocsp.client.verify_errstr; }
+ else
+#endif
+ tls_error(US"SSL_connect", host, sigalrm_seen ? US"timed out" : NULL, errstr);
return FALSE;
}
DEBUG(D_tls)
{
debug_printf("SSL_connect succeeded\n");
-#ifdef EXIM_HAVE_OPENSSL_KEYLOG
- {
- BIO * bp = BIO_new_fp(debug_file, BIO_NOCLOSE);
- SSL_SESSION_print_keylog(bp, SSL_get_session(exim_client_ctx->ssl));
- BIO_free(bp);
- }
-#endif
+ tls_dump_keylog(exim_client_ctx->ssl);
}
#ifndef DISABLE_TLS_RESUME
}
/*XXX will this work with continued-TLS? */
-/* Channel-binding info for authenticators */
- {
- uschar c, * s;
- size_t len = SSL_get_finished(exim_client_ctx->ssl, &c, 0);
- int old_pool = store_pool;
-
- SSL_get_finished(exim_client_ctx->ssl, s = store_get((int)len, TRUE), len);
- store_pool = POOL_PERM;
- tlsp->channelbinding = b64encode_taint(CUS s, (int)len, TRUE);
- store_pool = old_pool;
- DEBUG(D_tls) debug_printf("Have channel bindings cached for possible auth usage %p %p\n", tlsp->channelbinding, tlsp);
- }
+tls_get_channel_binding(exim_client_ctx->ssl, tlsp, GET_TAINTED);
tlsp->active.sock = cctx->sock;
tlsp->active.tls_ctx = exim_client_ctx;
{
#ifndef DISABLE_DKIM
int n = ssl_xfer_buffer_hwm - ssl_xfer_buffer_lwm;
-debug_printf("tls_get_cache\n");
if (n > lim)
n = lim;
if (n > 0)
if (*fdp < 0) return; /* TLS was not active */
-if (do_shutdown)
+if (do_shutdown > TLS_NO_SHUTDOWN)
{
int rc;
DEBUG(D_tls) debug_printf("tls_close(): shutting down TLS%s\n",
- do_shutdown > 1 ? " (with response-wait)" : "");
+ do_shutdown > TLS_SHUTDOWN_NOWAIT ? " (with response-wait)" : "");
tls_write(ct_ctx, NULL, 0, FALSE); /* flush write buffer */
- if ( (rc = SSL_shutdown(*sslp)) == 0 /* send "close notify" alert */
- && do_shutdown > 1)
+ if ( ( do_shutdown >= TLS_SHUTDOWN_WONLY
+ || (rc = SSL_shutdown(*sslp)) == 0 /* send "close notify" alert */
+ )
+ && do_shutdown > TLS_SHUTDOWN_NOWAIT
+ )
{
+#ifdef EXIM_TCP_CORK
+ (void) setsockopt(*fdp, IPPROTO_TCP, EXIM_TCP_CORK, US &off, sizeof(off));
+#endif
ALARM(2);
- rc = SSL_shutdown(*sslp); /* wait for response */
+ rc = SSL_shutdown(*sslp); /* wait for response */
ALARM_CLR(0);
}
if (!o_ctx) /* server side */
{
#ifndef DISABLE_OCSP
- sk_X509_pop_free(state_server.verify_stack, X509_free);
- state_server.verify_stack = NULL;
+ sk_X509_pop_free(state_server.u_ocsp.server.verify_stack, X509_free);
+ state_server.u_ocsp.server.verify_stack = NULL;
#endif
receive_getc = smtp_getc;
uschar *
tls_validate_require_cipher(void)
{
-SSL_CTX *ctx;
-uschar *s, *expciphers, *err;
+SSL_CTX * ctx;
+uschar * expciphers, * err;
tls_openssl_init();
if (!(expciphers && *expciphers))
return NULL;
-/* normalisation ripped from above */
-s = expciphers;
-while (*s != 0) { if (*s == '_') *s = '-'; s++; }
+normalise_ciphers(&expciphers, tls_require_ciphers);
err = NULL;
-
if (lib_ctx_new(&ctx, NULL, &err) == OK)
{
DEBUG(D_tls)
will change, so we can more usefully assist with version diagnosis by also
reporting the build date.
-Arguments: a FILE* to print the results to
-Returns: nothing
+Arguments: string to append to
+Returns: string
*/
-void
-tls_version_report(FILE *f)
+gstring *
+tls_version_report(gstring * g)
{
-fprintf(f, "Library version: OpenSSL: Compile: %s\n"
- " Runtime: %s\n"
- " : %s\n",
- OPENSSL_VERSION_TEXT,
- SSLeay_version(SSLEAY_VERSION),
- SSLeay_version(SSLEAY_BUILT_ON));
-/* third line is 38 characters for the %s and the line is 73 chars long;
-the OpenSSL output includes a "built on: " prefix already. */
+return string_fmt_append(g,
+ "Library version: OpenSSL: Compile: %s\n"
+ " Runtime: %s\n"
+ " : %s\n",
+ OPENSSL_VERSION_TEXT,
+ SSLeay_version(SSLEAY_VERSION),
+ SSLeay_version(SSLEAY_BUILT_ON));
+ /* third line is 38 characters for the %s and the line is 73 chars long;
+ the OpenSSL output includes a "built on: " prefix already. */
}
git://git.exim.org / exim.git / blobdiff