<secondary>failure report</secondary>
<see><emphasis>bounce message</emphasis></see>
</indexterm>
+<indexterm role="concept">
+ <primary>de-tainting</primary>
+ <see><emphasis>tainting, de-tainting</emphasis></see>
+</indexterm>
+<indexterm role="concept">
+ <primary>detainting</primary>
+ <see><emphasis>tainting, de-tainting</emphasis></see>
+</indexterm>
<indexterm role="concept">
<primary>dialup</primary>
<see><emphasis>intermittently connected hosts</emphasis></see>
and expansion of data deriving from the sender (&"tainted data"&)
.new
is not permitted (including acessing a file using a tainted name).
+The main config option &%allow_insecure_tainted_data%& can be used as
+mitigation during uprades to more secure configurations.
.wen
.new
The parsing correctly handles SMTPUTF8 Unicode in the string.
-.vitem &*${mask:*&<&'IP&~address'&>&*/*&<&'bit&~count'&>&*}*&
+.vitem &*${mask:*&<&'IP&~address'&>&*/*&<&'bit&~count'&>&*}*& &&&
+ &*${mask_n:*&<&'IP&~address'&>&*/*&<&'bit&~count'&>&*}*&
.cindex "masked IP address"
.cindex "IP address" "masking"
.cindex "CIDR notation"
.code
${mask:10.111.131.206/28}
.endd
-returns the string &"10.111.131.192/28"&. Since this operation is expected to
-be mostly used for looking up masked addresses in files, the result for an IPv6
+returns the string &"10.111.131.192/28"&.
+
+Since this operation is expected to
+be mostly used for looking up masked addresses in files, the
+.new
+normal
+.wen
+result for an IPv6
address uses dots to separate components instead of colons, because colon
terminates a key string in lsearch files. So, for example,
.code
.code
3ffe.ffff.836f.0a00.000a.0800.2000.0000/99
.endd
+.new
+If the optional form &*mask_n*& is used, IPv6 address result are instead
+returned in normailsed form, using colons and with zero-compression.
+.wen
Letters in IPv6 addresses are always output in lower case.
.vitem &$acl_verify_message$&
.vindex "&$acl_verify_message$&"
After an address verification has failed, this variable contains the failure
-message. It retains its value for use in subsequent modifiers. The message can
-be preserved by coding like this:
+message. It retains its value for use in subsequent modifiers of the verb.
+The message can be preserved by coding like this:
.code
warn !verify = sender
set acl_m0 = $acl_verify_message
You can use &$acl_verify_message$& during the expansion of the &%message%& or
&%log_message%& modifiers, to include information about the verification
failure.
+.new
+&*Note*&: The variable is cleared at the end of processing the ACL verb.
+.wen
.vitem &$address_data$&
.vindex "&$address_data$&"
contains the size supplied on the MAIL command, or -1 if no size was given. The
value may not, of course, be truthful.
-.vitem &$mime_$&&'xxx'&
+.vitem &$mime_anomaly_level$& &&&
+ &$mime_anomaly_text$& &&&
+ &$mime_boundary$& &&&
+ &$mime_charset$& &&&
+ &$mime_content_description$& &&&
+ &$mime_content_disposition$& &&&
+ &$mime_content_id$& &&&
+ &$mime_content_size$& &&&
+ &$mime_content_transfer_encoding$& &&&
+ &$mime_content_type$& &&&
+ &$mime_decoded_filename$& &&&
+ &$mime_filename$& &&&
+ &$mime_is_coverletter$& &&&
+ &$mime_is_multipart$& &&&
+ &$mime_is_rfc822$& &&&
+ &$mime_part_count$&
A number of variables whose names start with &$mime$& are
available when Exim is compiled with the content-scanning extension. For
details, see section &<<SECTscanmimepart>>&.
This variable is set to &"yes"& if PRDR was requested by the client for the
current message, otherwise &"no"&.
-.vitem &$prvscheck_address$&
-This variable is used in conjunction with the &%prvscheck%& expansion item,
-which is described in sections &<<SECTexpansionitems>>& and
-&<<SECTverifyPRVS>>&.
-
-.vitem &$prvscheck_keynum$&
-This variable is used in conjunction with the &%prvscheck%& expansion item,
-which is described in sections &<<SECTexpansionitems>>& and
-&<<SECTverifyPRVS>>&.
-
-.vitem &$prvscheck_result$&
-This variable is used in conjunction with the &%prvscheck%& expansion item,
+.vitem &$prvscheck_address$& &&&
+ &$prvscheck_keynum$& &&&
+ &$prvscheck_result$&
+These variables are used in conjunction with the &%prvscheck%& expansion item,
which is described in sections &<<SECTexpansionitems>>& and
&<<SECTverifyPRVS>>&.
.section "Miscellaneous" "SECID96"
.table2
.row &%add_environment%& "environment variables"
+.row &%allow_insecure_tainted_data%& "turn taint errors into warnings"
.row &%bi_command%& "to run for &%-bi%& command line option"
.row &%debug_store%& "do extra internal checks"
.row &%disable_ipv6%& "do no IPv6 processing"
.table2
.row &%gnutls_compat_mode%& "use GnuTLS compatibility mode"
.row &%gnutls_allow_auto_pkcs11%& "allow GnuTLS to autoload PKCS11 modules"
+.row &%hosts_require_alpn%& "mandatory ALPN"
.row &%openssl_options%& "adjust OpenSSL compatibility options"
.row &%tls_advertise_hosts%& "advertise TLS to these hosts"
+.row &%tls_alpn%& "acceptable protocol names"
.row &%tls_certificate%& "location of server certificate"
.row &%tls_crl%& "certificate revocation list"
.row &%tls_dh_max_bits%& "clamp D-H bit count suggestion"
configuration). This &"magic string"& matches the domain literal form of all
the local host's IP addresses.
+.new
+.option allow_insecure_tainted_data main boolean false
+.cindex "de-tainting"
+.oindex "allow_insecure_tainted_data"
+The handling of tainted data may break older (pre 4.94) configurations.
+Setting this option to "true" turns taint errors (which result in a temporary
+message rejection) into warnings. This option is meant as mitigation only
+and deprecated already today. Future releases of Exim may ignore it.
+The &%taint%& log selector can be used to suppress even the warnings.
+.wen
+
+
.option allow_mx_to_ip main boolean false
.cindex "MX record" "pointing to IP address"
If the &%smtp_connection%& log selector is not set, this option has no effect.
+.new
+.option hosts_require_alpn main "host list&!!" unset
+.cindex ALPN "require negotiation in server"
+.cindex TLS ALPN
+.cindex TLS "Application Layer Protocol Names"
+If the TLS library supports ALPN
+then a successful negotiation of ALPN will be required for any client
+matching the list, for TLS to be used.
+See also the &%tls_alpn%& option.
+
+&*Note*&: prevention of fallback to in-clear connection is not
+managed by this option, and should be done separately.
+.wen
+
.option hosts_proxy main "host list&!!" unset
.cindex proxy "proxy protocol"
is not required the &%tls_advertise_hosts%& option should be set empty.
-.option tls_certificate main string list&!! unset
+.new
+.option tls_alpn main "string list&!!" "smtp : esmtp"
+.cindex TLS "Application Layer Protocol Names"
+.cindex TLS ALPN
+.cindex ALPN "set acceptable names for server"
+If this option is set,
+the TLS library supports ALPN,
+and the client offers either more than
+ALPN name or a name which does not match the list,
+the TLS connection is declined.
+.wen
+
+
+.option tls_certificate main "string list&!!" unset
.cindex "TLS" "server certificate; location of"
.cindex "certificate" "server, location of"
The value of this option is expanded, and must then be a list of absolute paths to
-.option tls_privatekey main string list&!! unset
+.option tls_privatekey main "string list&!!" unset
.cindex "TLS" "server private key; location of"
The value of this option is expanded, and must then be a list of absolute paths to
files which contains the server's private keys.
.option dkim_canon smtp string&!! unset
DKIM signing option. For details see section &<<SECDKIMSIGN>>&.
-.option dkim_domain smtp string list&!! unset
+.option dkim_domain smtp "string list&!!" unset
DKIM signing option. For details see section &<<SECDKIMSIGN>>&.
.option dkim_hash smtp string&!! sha256
DKIM signing option. For details see section &<<SECDKIMSIGN>>&.
TLS session for any host that matches this list.
&%tls_verify_certificates%& should also be set for the transport.
+.new
+.option hosts_require_alpn smtp "host list&!!" unset
+.cindex ALPN "require negotiation in client"
+.cindex TLS ALPN
+.cindex TLS "Application Layer Protocol Names"
+If the TLS library supports ALPN
+then a successful negotiation of ALPN will be required for any host
+matching the list, for TLS to be used.
+See also the &%tls_alpn%& option.
+
+&*Note*&: prevention of fallback to in-clear connection is not
+managed by this option; see &%hosts_require_tls%&.
+.wen
+
.option hosts_require_dane smtp "host list&!!" unset
.cindex DANE "transport options"
.cindex DANE "requiring for certain servers"
transport. For details see section &<<SECTproxySOCKS>>&.
+.new
+.option tls_alpn smtp string&!! unset
+.cindex TLS "Application Layer Protocol Names"
+.cindex TLS ALPN
+.cindex ALPN "set name in client"
+If this option is set
+and the TLS library supports ALPN,
+the value given is used.
+
+As of writing no value has been standardised for email use.
+The authors suggest using &"smtp"&.
+.wen
+
+
+
.option tls_certificate smtp string&!! unset
.cindex "TLS" "client certificate, location of"
.cindex "certificate" "client, location of"
0.5.10. (Its presence predates the current API which Exim uses, so if Exim
built, then you have SNI support).
+.new
+.cindex TLS ALPN
+.cindex ALPN "general information"
+.cindex TLS "Application Layer Protocol Names"
+There is a TLS feature related to SNI
+called Application Layer Protocol Name (ALPN).
+This is intended to declare, or select, what protocol layer will be using a TLS
+connection.
+The client for the connection proposes a set of protocol names, and
+the server responds with a selected one.
+It is not, as of 2021, commonly used for SMTP connections.
+However, to guard against misirected or malicious use of web clients
+(which often do use ALPN) against MTA ports, Exim by default check that
+there is no incompatible ALPN specified by a client for a TLS connection.
+If there is, the connection is rejected.
+
+As a client Exim does not supply ALPN by default.
+The behaviour of both client and server can be configured using the options
+&%tls_alpn%& and &%hosts_require_alpn%&.
+There are no variables providing observability.
+Some feature-specific logging may appear on denied connections, but this
+depends on the behavious of the peer
+(not all peers can send a feature-specific TLS Alert).
+
+This feature is available when Exim is built with
+OpenSSL 1.1.0 or later or GnuTLS 3.2.0 or later;
+the macro _HAVE_TLS_ALPN will be defined when this is so.
+.wen
+
.section "Multiple messages on the same encrypted TCP/IP connection" &&&
response.
.vindex "&$acl_verify_message$&"
-For ACLs that are called by an &%acl =%& ACL condition, the message is
-stored in &$acl_verify_message$&, from which the calling ACL may use it.
+.new
+While the text is being expanded, the &$acl_verify_message$& variable
+contains any message previously set.
+Afterwards, &$acl_verify_message$& is cleared.
+.wen
If &%message%& is used on a statement that verifies an address, the message
specified overrides any message that is generated by the verification process.
non-SMTP ACLs. It causes the incoming message to be scanned for a match with
any of the regular expressions. For details, see chapter &<<CHAPexiscan>>&.
+.new
+.vitem &*seen&~=&~*&<&'parameters'&>
+.cindex "&%sseen%& ACL condition"
+This condition can be used to test if a situation has been previously met,
+for example for greylisting.
+Details are given in section &<<SECTseen>>&.
+.wen
+
.vitem &*sender_domains&~=&~*&<&'domain&~list'&>
.cindex "&%sender_domains%& ACL condition"
.cindex "sender" "ACL checking"
dnslists = <; dnsbl.example.com/<|$acl_m_addrslist
.endd
+
+.new
+.section "Previously seen user and hosts" "SECTseen"
+.cindex "&%sseen%& ACL condition"
+.cindex greylisting
+The &%seen%& ACL condition can be used to test whether a
+situation has been previously met.
+It uses a hints database to record a timestamp against a key.
+host. The syntax of the condition is:
+.display
+&`seen =`& <&'time interval'&> &`/`& <&'options'&>
+.endd
+
+For example,
+.code
+defer seen = -5m / key=${sender_host_address}_$local_part@$domain
+.endd
+in a RCPT ACL will implement simple greylisting.
+
+The parameters for the condition
+are an interval followed, slash-separated, by a list of options.
+The interval is taken as an offset before the current time,
+and used for the test.
+If the interval is preceded by a minus sign then the condition returns
+whether a record is found which is before the test time.
+Otherwise, the condition returns whether one is found which is since the
+test time.
+
+Options are read in order with later ones overriding earlier ones.
+
+The default key is &$sender_host_address$&.
+An explicit key can be set using a &%key=value%& option.
+
+If a &%readonly%& option is given then
+no record create or update is done.
+If a &%write%& option is given then
+a record create or update is always done.
+An update is done if the test is for &"since"&.
+
+Creates and updates are marked with the current time.
+
+Finally, a &"before"& test which succeeds, and for which the record
+is old enough, will be refreshed with a timestamp of the test time.
+This can prevent tidying of the database from removing the entry.
+The interval for this is, by default, 10 days.
+An explicit interval can be set using a
+&%refresh=value%& option.
+
+Note that &"seen"& should be added to the list of hints databases
+for maintenance if this ACL condition is used.
+.wen
+
+
.section "Rate limiting incoming messages" "SECTratelimiting"
.cindex "rate limiting" "client sending"
.cindex "limiting client sending rates"
If you are writing your own custom rejection message or log message when
denying access, you can use this variable to include information about the
verification failure.
+This variable is cleared at the end of processing the ACL verb.
In addition, &$sender_verify_failure$& or &$recipient_verify_failure$& (as
appropriate) contains one of the following words:
&` smtp_protocol_error `& SMTP protocol errors
&` smtp_syntax_error `& SMTP syntax errors
&` subject `& contents of &'Subject:'& on <= lines
+&`*taint `& taint errors or warnings
&`*tls_certificate_verified `& certificate verification status
&`*tls_cipher `& TLS cipher suite on <= and => lines
&` tls_peerdn `& TLS peer DN on <= and => lines
&`CV=dane`& if using a DNS trust anchor,
and &`CV=no`& if not.
.next
+.cindex "log" "Taint warnings"
+&%taint%&: Log warnings about tainted data. This selector can't be
+turned of if &%allow_insecure_tainted_data%& is false (which is the
+default).
+.next
.cindex "log" "TLS cipher"
.cindex "TLS" "logging cipher"
&%tls_cipher%&: When a message is sent or received over an encrypted
.section "exim_dumpdb" "SECTdumpdb"
.cindex "&'exim_dumpdb'&"
The entire contents of a database are written to the standard output by the
-&'exim_dumpdb'& program, which has no options or arguments other than the
-spool and database names. For example, to dump the retry database:
+&'exim_dumpdb'& program,
+.new
+taking as arguments the spool and database names.
+An option &'-z'& may be given to regest times in UTC;
+otherwise times are in the local timezone.
+.wen
+For example, to dump the retry database:
.code
exim_dumpdb /var/spool/exim retry
.endd
.cindex "&'exim_fixdb'&"
The &'exim_fixdb'& program is a utility for interactively modifying databases.
Its main use is for testing Exim, but it might also be occasionally useful for
-getting round problems in a live system. It has no options, and its interface
+getting round problems in a live system. Its interface
is somewhat crude. On entry, it prompts for input with a right angle-bracket. A
key of a database record can then be entered, and the data for that record is
displayed.
sequence of digit pairs for year, month, day, hour, and minute. Colons can be
used as optional separators.
+.new
+Both displayed and input times are in the local timezone by default.
+If an option &'-z'& is used on the command line, displayed times
+are in UTC.
+.wen
+
.vitem &%temperror%&
This indicates a temporary error during all processing, including Exim's
SPF processing. You may defer messages when this occurs.
+
+.vitem &%invalid%&
+There was an error during processing of the SPF lookup
.endlist
You can prefix each string with an exclamation mark to invert
.vitem &$spf_received$&
.vindex &$spf_received$&
- This contains a complete Received-SPF: header that can be
- added to the message. Please note that according to the SPF
- draft, this header must be added at the top of the header
- list. Please see section 10 on how you can do this.
+ This contains a complete Received-SPF: header (name and
+ content) that can be added to the message. Please note that
+ according to the SPF draft, this header must be added at the
+ top of the header list, i.e. with
+.code
+add_header = :at_start:$spf_received
+.endd
+ See section &<<SECTaddheadacl>>& for further details.
Note: in case of "Best-guess" (see below), the convention is
to put this string in a header called X-SPF-Guess: instead.
.vitem &$spf_result$&
.vindex &$spf_result$&
This contains the outcome of the SPF check in string form,
- one of pass, fail, softfail, none, neutral, permerror or
- temperror.
+ currently one of pass, fail, softfail, none, neutral, permerror,
+ temperror, or &"(invalid)"&.
.vitem &$spf_result_guessed$&
.vindex &$spf_result_guessed$&
git://git.exim.org / exim.git / blobdiff