[exim.git] / src / src / tls-gnu.c

/*************************************************
*     Exim - an Internet mail transport agent    *
*************************************************/

/* Copyright (c) The Exim Maintainers 2020 - 2023 */
/* Copyright (c) University of Cambridge 1995 - 2018 */
/* Copyright (c) Phil Pennock 2012 */
/* See the file NOTICE for conditions of use and distribution. */
/* SPDX-License-Identifier: GPL-2.0-or-later */

/* This file provides TLS/SSL support for Exim using the GnuTLS library,
one of the available supported implementations.  This file is #included into
tls.c when USE_GNUTLS has been set.

The code herein is a revamp of GnuTLS integration using the current APIs; the
original tls-gnu.c was based on a patch which was contributed by Nikos
Mavrogiannopoulos.  The revamp is partially a rewrite, partially cut&paste as
appropriate.

APIs current as of GnuTLS 2.12.18; note that the GnuTLS manual is for GnuTLS 3,
which is not widely deployed by OS vendors.  Will note issues below, which may
assist in updating the code in the future.  Another sources of hints is
mod_gnutls for Apache (SNI callback registration and handling).

Keeping client and server variables more split than before and is currently
the norm, in anticipation of TLS in ACL callouts.

I wanted to switch to gnutls_certificate_set_verify_function() so that
certificate rejection could happen during handshake where it belongs, rather
than being dropped afterwards, but that was introduced in 2.10.0 and Debian
(6.0.5) is still on 2.8.6.  So for now we have to stick with sub-par behaviour.

(I wasn't looking for libraries quite that old, when updating to get rid of
compiler warnings of deprecated APIs.  If it turns out that a lot of the rest
require current GnuTLS, then we'll drop support for the ancient libraries).
*/

#include <gnutls/gnutls.h>
/* needed for cert checks in verification and DN extraction: */
#include <gnutls/x509.h>
/* man-page is incorrect, gnutls_rnd() is not in gnutls.h: */
#include <gnutls/crypto.h>

/* needed to disable PKCS11 autoload unless requested */
#if GNUTLS_VERSION_NUMBER >= 0x020c00
# include <gnutls/pkcs11.h>
# define SUPPORT_PARAM_TO_PK_BITS
#endif
#if GNUTLS_VERSION_NUMBER < 0x030103 && !defined(DISABLE_OCSP)
# warning "GnuTLS library version too old; define DISABLE_OCSP in Makefile"
# define DISABLE_OCSP
#endif
#if GNUTLS_VERSION_NUMBER < 0x020a00 && !defined(DISABLE_EVENT)
# warning "GnuTLS library version too old; tls:cert event unsupported"
# define DISABLE_EVENT
#endif
#if GNUTLS_VERSION_NUMBER >= 0x030000
# define SUPPORT_SELFSIGN       /* Uncertain what version is first usable but 2.12.23 is not */
#endif
#if GNUTLS_VERSION_NUMBER >= 0x030306
# define SUPPORT_CA_DIR
#else
# undef  SUPPORT_CA_DIR
#endif
#if GNUTLS_VERSION_NUMBER >= 0x030014
# define SUPPORT_SYSDEFAULT_CABUNDLE
#endif
#if GNUTLS_VERSION_NUMBER >= 0x030104
# define GNUTLS_CERT_VFY_STATUS_PRINT
#endif
#if GNUTLS_VERSION_NUMBER >= 0x030109
# define SUPPORT_CORK
#endif
#if GNUTLS_VERSION_NUMBER >= 0x03010a
# define SUPPORT_GNUTLS_SESS_DESC
#endif
#if GNUTLS_VERSION_NUMBER >= 0x030300
# define GNUTLS_AUTO_GLOBAL_INIT
# define GNUTLS_AUTO_PKCS11_MANUAL
#endif
#if (GNUTLS_VERSION_NUMBER >= 0x030404) \
  || (GNUTLS_VERSION_NUMBER >= 0x030311) && (GNUTLS_VERSION_NUMBER & 0xffff00 == 0x030300)
# ifndef DISABLE_OCSP
#  define EXIM_HAVE_OCSP
# endif
#endif
#if GNUTLS_VERSION_NUMBER >= 0x030500
# define SUPPORT_GNUTLS_KEYLOG
#endif
#if GNUTLS_VERSION_NUMBER >= 0x030506 && !defined(DISABLE_OCSP)
# define SUPPORT_SRV_OCSP_STACK
#endif
#if GNUTLS_VERSION_NUMBER >= 0x030603
# define EXIM_HAVE_TLS1_3
# define SUPPORT_GNUTLS_EXT_RAW_PARSE
# define GNUTLS_OCSP_STATUS_REQUEST_GET2
#endif

#ifdef SUPPORT_DANE
# if GNUTLS_VERSION_NUMBER >= 0x030000
#  define DANESSL_USAGE_DANE_TA 2
#  define DANESSL_USAGE_DANE_EE 3
# else
#  error GnuTLS version too early for DANE
# endif
# if GNUTLS_VERSION_NUMBER < 0x999999
#  define GNUTLS_BROKEN_DANE_VALIDATION
# endif
#endif

#ifndef DISABLE_TLS_RESUME
# if GNUTLS_VERSION_NUMBER >= 0x030603
#  define EXIM_HAVE_TLS_RESUME
# else
#  warning "GnuTLS library version too old; resumption unsupported"
# endif
#endif

#if GNUTLS_VERSION_NUMBER >= 0x030200
# ifdef SUPPORT_GNUTLS_EXT_RAW_PARSE
#  define EXIM_HAVE_ALPN
# endif
#endif

#if GNUTLS_VERSION_NUMBER >= 0x030702
# define HAVE_GNUTLS_EXPORTER
#endif

#ifndef DISABLE_OCSP
# include <gnutls/ocsp.h>
#endif
#ifdef SUPPORT_DANE
# include <gnutls/dane.h>
#endif

#include "tls-cipher-stdname.c"


#ifdef MACRO_PREDEF
void
options_tls(void)
{
# ifndef DISABLE_TLS_RESUME
builtin_macro_create_var(US"_RESUME_DECODE", RESUME_DECODE_STRING );
# endif
# ifdef EXIM_HAVE_TLS1_3
builtin_macro_create(US"_HAVE_TLS1_3");
# endif
# ifdef EXIM_HAVE_OCSP
builtin_macro_create(US"_HAVE_TLS_OCSP");
# endif
# ifdef SUPPORT_SRV_OCSP_STACK
builtin_macro_create(US"_HAVE_TLS_OCSP_LIST");
# endif
#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
builtin_macro_create(US"_HAVE_TLS_CA_CACHE");
# endif
# ifdef EXIM_HAVE_ALPN
builtin_macro_create(US"_HAVE_TLS_ALPN");
# endif
}
#else


/* GnuTLS 2 vs 3

GnuTLS 3 only:
  gnutls_global_set_audit_log_function()

Changes:
  gnutls_certificate_verify_peers2(): is new, drop the 2 for old version
*/

/* Local static variables for GnuTLS */

/* Values for verify_requirement */

enum peer_verify_requirement
  { VERIFY_NONE, VERIFY_OPTIONAL, VERIFY_REQUIRED, VERIFY_DANE };

/* This holds most state for server or client; with this, we can set up an
outbound TLS-enabled connection in an ACL callout, while not stomping all
over the TLS variables available for expansion.

Some of these correspond to variables in globals.c; those variables will
be set to point to content in one of these instances, as appropriate for
the stage of the process lifetime.

Not handled here: global tlsp->tls_channelbinding.
*/

typedef struct exim_gnutls_state {
  gnutls_session_t      session;

  exim_tlslib_state     lib_state;
#define x509_cred               libdata0
#define pri_cache               libdata1

  enum peer_verify_requirement verify_requirement;
  int                   fd_in;
  int                   fd_out;

  BOOL                  peer_cert_verified:1;
  BOOL                  peer_dane_verified:1;
  BOOL                  trigger_sni_changes:1;
  BOOL                  have_set_peerdn:1;
  BOOL                  xfer_eof:1;     /*XXX never gets set! */
  BOOL                  xfer_error:1;
#ifdef SUPPORT_CORK
  BOOL                  corked:1;
#endif

  const struct host_item *host;         /* NULL if server */
  gnutls_x509_crt_t     peercert;
  uschar                *peerdn;
  uschar                *ciphersuite;
  uschar                *received_sni;

  const uschar *tls_certificate;
  const uschar *tls_privatekey;
  const uschar *tls_sni; /* client send only, not received */
  const uschar *tls_verify_certificates;
  const uschar *tls_crl;
  const uschar *tls_require_ciphers;

  uschar *exp_tls_certificate;
  uschar *exp_tls_privatekey;
  uschar *exp_tls_verify_certificates;
  uschar *exp_tls_crl;
  uschar *exp_tls_require_ciphers;
  const uschar *exp_tls_verify_cert_hostnames;
#ifndef DISABLE_EVENT
  uschar *event_action;
#endif
#ifdef SUPPORT_DANE
  char * const *        dane_data;
  const int *           dane_data_len;
#endif

  tls_support *tlsp;    /* set in tls_init() */

  uschar *xfer_buffer;
  int xfer_buffer_lwm;
  int xfer_buffer_hwm;
} exim_gnutls_state_st;

static const exim_gnutls_state_st exim_gnutls_state_init = {
  /* all elements not explicitly intialised here get 0/NULL/FALSE */
  .fd_in =              -1,
  .fd_out =             -1,
};

/* Not only do we have our own APIs which don't pass around state, assuming
it's held in globals, GnuTLS doesn't appear to let us register callback data
for callbacks, or as part of the session, so we have to keep a "this is the
context we're currently dealing with" pointer and rely upon being
single-threaded to keep from processing data on an inbound TLS connection while
talking to another TLS connection for an outbound check.  This does mean that
there's no way for heart-beats to be responded to, for the duration of the
second connection.
XXX But see gnutls_session_get_ptr()
*/

static exim_gnutls_state_st state_server = {
  /* all elements not explicitly intialised here get 0/NULL/FALSE */
  .fd_in =              -1,
  .fd_out =             -1,
};

/* dh_params are initialised once within the lifetime of a process using TLS;
if we used TLS in a long-lived daemon, we'd have to reconsider this.  But we
don't want to repeat this. */

static gnutls_dh_params_t dh_server_params = NULL;

static int ssl_session_timeout = 7200;  /* Two hours */

static const uschar * const exim_default_gnutls_priority = US"NORMAL";

/* Guard library core initialisation */

static BOOL exim_gnutls_base_init_done = FALSE;

#ifndef DISABLE_OCSP
static BOOL gnutls_buggy_ocsp = FALSE;
static BOOL exim_testharness_disable_ocsp_validity_check = FALSE;
#endif

#ifdef EXIM_HAVE_ALPN
static int server_seen_alpn = -1;       /* count of names */
#endif
#ifdef EXIM_HAVE_TLS_RESUME
static gnutls_datum_t server_sessticket_key;
#endif


/* ------------------------------------------------------------------------ */
/* macros */

#define MAX_HOST_LEN 255

/* Set this to control gnutls_global_set_log_level(); values 0 to 9 will setup
the library logging; a value less than 0 disables the calls to set up logging
callbacks.  GNuTLS also looks for an environment variable - except not for
setuid binaries, making it useless - "GNUTLS_DEBUG_LEVEL".
Allegedly the testscript line "GNUTLS_DEBUG_LEVEL=9 sudo exim ..." would work,
but the env var must be added to /etc/sudoers too. */
#ifndef EXIM_GNUTLS_LIBRARY_LOG_LEVEL
# define EXIM_GNUTLS_LIBRARY_LOG_LEVEL -1
#endif

#ifndef EXIM_CLIENT_DH_MIN_BITS
# define EXIM_CLIENT_DH_MIN_BITS 1024
#endif

/* With GnuTLS 2.12.x+ we have gnutls_sec_param_to_pk_bits() with which we
can ask for a bit-strength.  Without that, we stick to the constant we had
before, for now. */
#ifndef EXIM_SERVER_DH_BITS_PRE2_12
# define EXIM_SERVER_DH_BITS_PRE2_12 1024
#endif

#define Expand_check_tlsvar(Varname, errstr) \
  expand_check(state->Varname, US #Varname, &state->exp_##Varname, errstr)

#if GNUTLS_VERSION_NUMBER >= 0x020c00
# define HAVE_GNUTLS_SESSION_CHANNEL_BINDING
# define HAVE_GNUTLS_SEC_PARAM_CONSTANTS
# define HAVE_GNUTLS_RND
/* The security fix we provide with the gnutls_allow_auto_pkcs11 option
 * (4.82 PP/09) introduces a compatibility regression. The symbol simply
 * isn't available sometimes, so this needs to become a conditional
 * compilation; the sanest way to deal with this being a problem on
 * older OSes is to block it in the Local/Makefile with this compiler
 * definition  */
# ifndef AVOID_GNUTLS_PKCS11
#  define HAVE_GNUTLS_PKCS11
# endif /* AVOID_GNUTLS_PKCS11 */
#endif

#if GNUTLS_VERSION_NUMBER >= 0x030404
# define HAVE_GNUTLS_PRF_RFC5705
#endif



/* ------------------------------------------------------------------------ */
/* Callback declarations */

#if EXIM_GNUTLS_LIBRARY_LOG_LEVEL >= 0
static void exim_gnutls_logger_cb(int level, const char *message);
#endif

static int exim_sni_handling_cb(gnutls_session_t session);

#ifdef EXIM_HAVE_TLS_RESUME
static int
tls_server_ticket_cb(gnutls_session_t sess, u_int htype, unsigned when,
  unsigned incoming, const gnutls_datum_t * msg);
#endif


/*************************************************
*               Handle TLS error                 *
*************************************************/

/* Called from lots of places when errors occur before actually starting to do
the TLS handshake, that is, while the session is still in clear. Always returns
DEFER for a server and FAIL for a client so that most calls can use "return
tls_error(...)" to do this processing and then give an appropriate return. A
single function is used for both server and client, because it is called from
some shared functions.

Argument:
  prefix    text to include in the logged error
  msg       additional error string (may be NULL)
            usually obtained from gnutls_strerror()
  host      NULL if setting up a server;
            the connected host if setting up a client
  errstr    pointer to returned error string

Returns:    DEFER/FAIL
*/

static int
tls_error(const uschar *prefix, const uschar *msg, const host_item *host,
  uschar ** errstr)
{
if (errstr)
  *errstr = string_sprintf("(%s)%s%s", prefix, msg ? ": " : "", msg ? msg : US"");
return host ? FAIL : DEFER;
}


/* Returns:    DEFER/FAIL */
static int
tls_error_gnu(exim_gnutls_state_st * state, const uschar *prefix, int err,
  uschar ** errstr)
{
return tls_error(prefix,
  state && err == GNUTLS_E_FATAL_ALERT_RECEIVED
  ? string_sprintf("rxd alert: %s",
                  US gnutls_alert_get_name(gnutls_alert_get(state->session)))
  : US gnutls_strerror(err),
  state ? state->host : NULL,
  errstr);
}

static int
tls_error_sys(const uschar *prefix, int err, const host_item *host,
  uschar ** errstr)
{
return tls_error(prefix, US strerror(err), host, errstr);
}


/* ------------------------------------------------------------------------ */
/* Initialisation */

#ifndef DISABLE_OCSP

static BOOL
tls_is_buggy_ocsp(void)
{
const uschar * s;
uschar maj, mid, mic;

s = CUS gnutls_check_version(NULL);
maj = atoi(CCS s);
if (maj == 3)
  {
  while (*s && *s != '.') s++;
  mid = atoi(CCS ++s);
  if (mid <= 2)
    return TRUE;
  else if (mid >= 5)
    return FALSE;
  else
    {
    while (*s && *s != '.') s++;
    mic = atoi(CCS ++s);
    return mic <= (mid == 3 ? 16 : 3);
    }
  }
return FALSE;
}

#endif


static int
tls_g_init(uschar ** errstr)
{
int rc;
DEBUG(D_tls) debug_printf("GnuTLS global init required\n");

#if defined(HAVE_GNUTLS_PKCS11) && !defined(GNUTLS_AUTO_PKCS11_MANUAL)
/* By default, gnutls_global_init will init PKCS11 support in auto mode,
which loads modules from a config file, which sounds good and may be wanted
by some sysadmin, but also means in common configurations that GNOME keyring
environment variables are used and so breaks for users calling mailq.
To prevent this, we init PKCS11 first, which is the documented approach. */

if (!gnutls_allow_auto_pkcs11)
  if ((rc = gnutls_pkcs11_init(GNUTLS_PKCS11_FLAG_MANUAL, NULL)))
    return tls_error_gnu(NULL, US"gnutls_pkcs11_init", rc, errstr);
#endif

#ifndef GNUTLS_AUTO_GLOBAL_INIT
if ((rc = gnutls_global_init()))
  return tls_error_gnu(NULL, US"gnutls_global_init", rc, errstr);
#endif

#if EXIM_GNUTLS_LIBRARY_LOG_LEVEL >= 0
DEBUG(D_tls)
  {
  gnutls_global_set_log_function(exim_gnutls_logger_cb);
  /* arbitrarily chosen level; bump up to 9 for more */
  gnutls_global_set_log_level(EXIM_GNUTLS_LIBRARY_LOG_LEVEL);
  }
#endif

#ifndef DISABLE_OCSP
if (tls_ocsp_file && (gnutls_buggy_ocsp = tls_is_buggy_ocsp()))
  log_write(0, LOG_MAIN, "OCSP unusable with this GnuTLS library version");
#endif

exim_gnutls_base_init_done = TRUE;
return OK;
}



/* Daemon-call before each connection.  Nothing to do for GnuTLS. */

static void
tls_per_lib_daemon_tick(void)
{
}

/* Daemon one-time initialisation */

static void
tls_per_lib_daemon_init(void)
{
uschar * dummy_errstr;
static BOOL once = FALSE;

if (!exim_gnutls_base_init_done)
  tls_g_init(&dummy_errstr);

if (!once)
  {
  once = TRUE;

#ifdef EXIM_HAVE_TLS_RESUME
  /* We are dependent on the GnuTLS implementation of the Session Ticket
  encryption; both the strength and the key rotation period.  We hope that
  the strength at least matches that of the ciphersuite (but GnuTLS does not
  document this). */

  gnutls_session_ticket_key_generate(&server_sessticket_key);   /* >= 2.10.0 */
  if (f.running_in_test_harness) ssl_session_timeout = 6;
#endif

  tls_daemon_creds_reload();
  }
}

/* ------------------------------------------------------------------------ */

/*************************************************
*    Deal with logging errors during I/O         *
*************************************************/

/* We have to get the identity of the peer from saved data.

Argument:
  state    the current GnuTLS exim state container
  rc       the GnuTLS error code, or 0 if it's a local error
  when     text identifying read or write
  text     local error text when rc is 0

Returns:   nothing
*/

static void
record_io_error(exim_gnutls_state_st *state, int rc, uschar *when, uschar *text)
{
const uschar * msg;
uschar * errstr;

msg = rc == GNUTLS_E_FATAL_ALERT_RECEIVED
  ? string_sprintf("A TLS fatal alert has been received: %s",
      US gnutls_alert_get_name(gnutls_alert_get(state->session)))
#ifdef GNUTLS_E_PREMATURE_TERMINATION
  : rc == GNUTLS_E_PREMATURE_TERMINATION && errno
  ? string_sprintf("%s: syscall: %s", US gnutls_strerror(rc), strerror(errno))
#endif
  : US gnutls_strerror(rc);

(void) tls_error(when, msg, state->host, &errstr);

if (state->host)
  log_write(0, LOG_MAIN, "H=%s [%s] TLS error on connection %s",
    state->host->name, state->host->address, errstr);
else
  {
  uschar * conn_info = smtp_get_connection_info();
  if (Ustrncmp(conn_info, US"SMTP ", 5) == 0) conn_info += 5;
  /* I'd like to get separated H= here, but too hard for now */
  log_write(0, LOG_MAIN, "TLS error on %s %s", conn_info, errstr);
  }
}




/*************************************************
*        Set various Exim expansion vars         *
*************************************************/

#define exim_gnutls_cert_err(Label) \
  do \
    { \
    if (rc != GNUTLS_E_SUCCESS) \
      { \
      DEBUG(D_tls) debug_printf("TLS: cert problem: %s: %s\n", \
        (Label), gnutls_strerror(rc)); \
      return rc; \
      } \
    } while (0)

static int
import_cert(const gnutls_datum_t * cert, gnutls_x509_crt_t * crtp)
{
int rc;

rc = gnutls_x509_crt_init(crtp);
exim_gnutls_cert_err(US"gnutls_x509_crt_init (crt)");

rc = gnutls_x509_crt_import(*crtp, cert, GNUTLS_X509_FMT_DER);
exim_gnutls_cert_err(US"failed to import certificate [gnutls_x509_crt_import(cert)]");

return rc;
}

#undef exim_gnutls_cert_err


/* We set various Exim global variables from the state, once a session has
been established.  With TLS callouts, may need to change this to stack
variables, or just re-call it with the server state after client callout
has finished.

Make sure anything set here is unset in tls_getc().

Sets:
  tls_active                fd
  tls_bits                  strength indicator
  tls_certificate_verified  bool indicator
  tls_channelbinding        for some SASL mechanisms
  tls_ver                   a string
  tls_cipher                a string
  tls_peercert              pointer to library internal
  tls_peerdn                a string
  tls_sni                   a (UTF-8) string
  tls_ourcert               pointer to library internal

Argument:
  state      the relevant exim_gnutls_state_st *
*/

static void
extract_exim_vars_from_tls_state(exim_gnutls_state_st * state)
{
tls_support * tlsp = state->tlsp;

tlsp->active.sock = state->fd_out;
tlsp->active.tls_ctx = state;

DEBUG(D_tls) debug_printf("cipher: %s\n", state->ciphersuite);

tlsp->certificate_verified = state->peer_cert_verified;
#ifdef SUPPORT_DANE
tlsp->dane_verified = state->peer_dane_verified;
#endif

/* note that tls_channelbinding is not saved to the spool file, since it's
only available for use for authenticators while this TLS session is running. */

tlsp->channelbinding = NULL;
#ifdef HAVE_GNUTLS_SESSION_CHANNEL_BINDING
  {
  gnutls_datum_t channel = {.data = NULL, .size = 0};
  int rc;

# ifdef HAVE_GNUTLS_EXPORTER
  if (gnutls_protocol_get_version(state->session) >= GNUTLS_TLS1_3)
    {
    rc = gnutls_session_channel_binding(state->session, GNUTLS_CB_TLS_EXPORTER, &channel);
    tlsp->channelbind_exporter = TRUE;
    }
  else
# elif defined(HAVE_GNUTLS_PRF_RFC5705)
  /* Older libraries may not have GNUTLS_TLS1_3 defined! */
  if (gnutls_protocol_get_version(state->session) > GNUTLS_TLS1_2)
    {
    uschar * buf = store_get(32, state->host ? GET_TAINTED : GET_UNTAINTED);
    rc = gnutls_prf_rfc5705(state->session,
                                (size_t)24,  "EXPORTER-Channel-Binding", (size_t)0, "",
                                32, CS buf);
    channel.data = buf;
    channel.size = 32;
    }
  else
# endif
    rc = gnutls_session_channel_binding(state->session, GNUTLS_CB_TLS_UNIQUE, &channel);

  if (rc)
    { DEBUG(D_tls) debug_printf("extracting channel binding: %s\n", gnutls_strerror(rc)); }
  else
    {
    int old_pool = store_pool;
    /* Declare the taintedness of the binding info.  On server, untainted; on
    client, tainted if we used the Finish msg from the server. */

    store_pool = POOL_PERM;
    tlsp->channelbinding = b64encode_taint(CUS channel.data, (int)channel.size,
                !tlsp->channelbind_exporter && state->host ? GET_TAINTED : GET_UNTAINTED);
    store_pool = old_pool;
    DEBUG(D_tls) debug_printf("Have channel bindings cached for possible auth usage\n");
    }
  }
#endif

/* peercert is set in peer_status() */
tlsp->peerdn = state->peerdn;

/* do not corrupt sni sent by client; record sni rxd by server */
if (!state->host)
  tlsp->sni = state->received_sni;

/* record our certificate */
  {
  const gnutls_datum_t * cert = gnutls_certificate_get_ours(state->session);
  gnutls_x509_crt_t crt;

  tlsp->ourcert = cert && import_cert(cert, &crt)==0 ? crt : NULL;
  }
}




/*************************************************
*            Setup up DH parameters              *
*************************************************/

/* Generating the D-H parameters may take a long time. They only need to
be re-generated every so often, depending on security policy. What we do is to
keep these parameters in a file in the spool directory. If the file does not
exist, we generate them. This means that it is easy to cause a regeneration.

The new file is written as a temporary file and renamed, so that an incomplete
file is never present. If two processes both compute some new parameters, you
waste a bit of effort, but it doesn't seem worth messing around with locking to
prevent this.

Returns:     OK/DEFER (expansion issue)/FAIL (requested none)
*/

static int
init_server_dh(uschar ** errstr)
{
int fd, rc;
unsigned int dh_bits;
gnutls_datum_t m;
uschar filename_buf[PATH_MAX];
uschar *filename = NULL;
size_t sz;
uschar *exp_tls_dhparam;
BOOL use_file_in_spool = FALSE;
host_item *host = NULL; /* dummy for macros */

DEBUG(D_tls) debug_printf("Initialising GnuTLS server params\n");

if ((rc = gnutls_dh_params_init(&dh_server_params)))
  return tls_error_gnu(NULL, US"gnutls_dh_params_init", rc, errstr);

m.data = NULL;
m.size = 0;

if (!expand_check(tls_dhparam, US"tls_dhparam", &exp_tls_dhparam, errstr))
  return DEFER;

if (!exp_tls_dhparam)
  {
  DEBUG(D_tls) debug_printf("Loading default hard-coded DH params\n");
  m.data = US std_dh_prime_default();
  m.size = Ustrlen(m.data);
  }
else if (Ustrcmp(exp_tls_dhparam, "historic") == 0)
  use_file_in_spool = TRUE;
else if (Ustrcmp(exp_tls_dhparam, "none") == 0)
  {
  DEBUG(D_tls) debug_printf("Requested no DH parameters\n");
  return FAIL;
  }
else if (exp_tls_dhparam[0] != '/')
  {
  if (!(m.data = US std_dh_prime_named(exp_tls_dhparam)))
    return tls_error(US"No standard prime named", exp_tls_dhparam, NULL, errstr);
  m.size = Ustrlen(m.data);
  }
else
  filename = exp_tls_dhparam;

if (m.data)
  {
  if ((rc = gnutls_dh_params_import_pkcs3(dh_server_params, &m, GNUTLS_X509_FMT_PEM)))
    return tls_error_gnu(NULL, US"gnutls_dh_params_import_pkcs3", rc, errstr);
  DEBUG(D_tls) debug_printf("Loaded fixed standard D-H parameters\n");
  return OK;
  }

#ifdef HAVE_GNUTLS_SEC_PARAM_CONSTANTS
/* If you change this constant, also change dh_param_fn_ext so that we can use a
different filename and ensure we have sufficient bits. */

if (!(dh_bits = gnutls_sec_param_to_pk_bits(GNUTLS_PK_DH, GNUTLS_SEC_PARAM_NORMAL)))
  return tls_error(US"gnutls_sec_param_to_pk_bits() failed", NULL, NULL, errstr);
DEBUG(D_tls)
  debug_printf("GnuTLS tells us that for D-H PK, NORMAL is %d bits\n",
      dh_bits);
#else
dh_bits = EXIM_SERVER_DH_BITS_PRE2_12;
DEBUG(D_tls)
  debug_printf("GnuTLS lacks gnutls_sec_param_to_pk_bits(), using %d bits\n",
      dh_bits);
#endif

/* Some clients have hard-coded limits. */
if (dh_bits > tls_dh_max_bits)
  {
  DEBUG(D_tls)
    debug_printf("tls_dh_max_bits clamping override, using %d bits instead\n",
        tls_dh_max_bits);
  dh_bits = tls_dh_max_bits;
  }

if (use_file_in_spool)
  {
  if (!string_format(filename_buf, sizeof(filename_buf),
        "%s/gnutls-params-%d", spool_directory, dh_bits))
    return tls_error(US"overlong filename", NULL, NULL, errstr);
  filename = filename_buf;
  }

/* Open the cache file for reading and if successful, read it and set up the
parameters. */

if ((fd = Uopen(filename, O_RDONLY, 0)) >= 0)
  {
  struct stat statbuf;
  FILE *fp;
  int saved_errno;

  if (fstat(fd, &statbuf) < 0)  /* EIO */
    {
    saved_errno = errno;
    (void)close(fd);
    return tls_error_sys(US"TLS cache stat failed", saved_errno, NULL, errstr);
    }
  if (!S_ISREG(statbuf.st_mode))
    {
    (void)close(fd);
    return tls_error(US"TLS cache not a file", NULL, NULL, errstr);
    }
  if (!(fp = fdopen(fd, "rb")))
    {
    saved_errno = errno;
    (void)close(fd);
    return tls_error_sys(US"fdopen(TLS cache stat fd) failed",
        saved_errno, NULL, errstr);
    }

  m.size = statbuf.st_size;
  if (!(m.data = store_malloc(m.size)))
    {
    fclose(fp);
    return tls_error_sys(US"malloc failed", errno, NULL, errstr);
    }
  if (!(sz = fread(m.data, m.size, 1, fp)))
    {
    saved_errno = errno;
    fclose(fp);
    store_free(m.data);
    return tls_error_sys(US"fread failed", saved_errno, NULL, errstr);
    }
  fclose(fp);

  rc = gnutls_dh_params_import_pkcs3(dh_server_params, &m, GNUTLS_X509_FMT_PEM);
  store_free(m.data);
  if (rc)
    return tls_error_gnu(NULL, US"gnutls_dh_params_import_pkcs3", rc, errstr);
  DEBUG(D_tls) debug_printf("read D-H parameters from file \"%s\"\n", filename);
  }

/* If the file does not exist, fall through to compute new data and cache it.
If there was any other opening error, it is serious. */

else if (errno == ENOENT)
  {
  rc = -1;
  DEBUG(D_tls)
    debug_printf("D-H parameter cache file \"%s\" does not exist\n", filename);
  }
else
  return tls_error(string_open_failed("\"%s\" for reading", filename),
      NULL, NULL, errstr);

/* If ret < 0, either the cache file does not exist, or the data it contains
is not useful. One particular case of this is when upgrading from an older
release of Exim in which the data was stored in a different format. We don't
try to be clever and support both formats; we just regenerate new data in this
case. */

if (rc < 0)
  {
  uschar *temp_fn;
  unsigned int dh_bits_gen = dh_bits;

  if ((PATH_MAX - Ustrlen(filename)) < 10)
    return tls_error(US"Filename too long to generate replacement",
        filename, NULL, errstr);

  temp_fn = string_copy(US"exim-dh.XXXXXXX");
  if ((fd = mkstemp(CS temp_fn)) < 0)   /* modifies temp_fn */
    return tls_error_sys(US"Unable to open temp file", errno, NULL, errstr);
  (void)exim_chown(temp_fn, exim_uid, exim_gid);   /* Probably not necessary */

  /* GnuTLS overshoots!
   * If we ask for 2236, we might get 2237 or more.
   * But there's no way to ask GnuTLS how many bits there really are.
   * We can ask how many bits were used in a TLS session, but that's it!
   * The prime itself is hidden behind too much abstraction.
   * So we ask for less, and proceed on a wing and a prayer.
   * First attempt, subtracted 3 for 2233 and got 2240.
   */
  if (dh_bits >= EXIM_CLIENT_DH_MIN_BITS + 10)
    {
    dh_bits_gen = dh_bits - 10;
    DEBUG(D_tls)
      debug_printf("being paranoid about DH generation, make it '%d' bits'\n",
          dh_bits_gen);
    }

  DEBUG(D_tls)
    debug_printf("requesting generation of %d bit Diffie-Hellman prime ...\n",
        dh_bits_gen);
  if ((rc = gnutls_dh_params_generate2(dh_server_params, dh_bits_gen)))
    return tls_error_gnu(NULL, US"gnutls_dh_params_generate2", rc, errstr);

  /* gnutls_dh_params_export_pkcs3() will tell us the exact size, every time,
  and I confirmed that a NULL call to get the size first is how the GnuTLS
  sample apps handle this. */

  sz = 0;
  m.data = NULL;
  if (  (rc = gnutls_dh_params_export_pkcs3(dh_server_params,
                GNUTLS_X509_FMT_PEM, m.data, &sz))
     && rc != GNUTLS_E_SHORT_MEMORY_BUFFER)
    return tls_error_gnu(NULL, US"gnutls_dh_params_export_pkcs3(NULL) sizing",
              rc, errstr);
  m.size = sz;
  if (!(m.data = store_malloc(m.size)))
    return tls_error_sys(US"memory allocation failed", errno, NULL, errstr);

  /* this will return a size 1 less than the allocation size above */
  if ((rc = gnutls_dh_params_export_pkcs3(dh_server_params, GNUTLS_X509_FMT_PEM,
      m.data, &sz)))
    {
    store_free(m.data);
    return tls_error_gnu(NULL, US"gnutls_dh_params_export_pkcs3() real", rc, errstr);
    }
  m.size = sz; /* shrink by 1, probably */

  if ((sz = write_to_fd_buf(fd, m.data, (size_t) m.size)) != m.size)
    {
    store_free(m.data);
    return tls_error_sys(US"TLS cache write D-H params failed",
        errno, NULL, errstr);
    }
  store_free(m.data);
  if ((sz = write_to_fd_buf(fd, US"\n", 1)) != 1)
    return tls_error_sys(US"TLS cache write D-H params final newline failed",
        errno, NULL, errstr);

  if ((rc = close(fd)))
    return tls_error_sys(US"TLS cache write close() failed", errno, NULL, errstr);

  if (Urename(temp_fn, filename) < 0)
    return tls_error_sys(string_sprintf("failed to rename \"%s\" as \"%s\"",
          temp_fn, filename), errno, NULL, errstr);

  DEBUG(D_tls) debug_printf("wrote D-H parameters to file \"%s\"\n", filename);
  }

DEBUG(D_tls) debug_printf("initialized server D-H parameters\n");
return OK;
}




/* Create and install a selfsigned certificate, for use in server mode. */

static int
tls_install_selfsign(exim_gnutls_state_st * state, uschar ** errstr)
{
gnutls_x509_crt_t cert = NULL;
time_t now;
gnutls_x509_privkey_t pkey = NULL;
const uschar * where;
int rc;

#ifndef SUPPORT_SELFSIGN
where = US"library too old";
rc = GNUTLS_E_NO_CERTIFICATE_FOUND;
if (TRUE) goto err;
#endif

DEBUG(D_tls) debug_printf("TLS: generating selfsigned server cert\n");
where = US"initialising pkey";
if ((rc = gnutls_x509_privkey_init(&pkey))) goto err;

where = US"initialising cert";
if ((rc = gnutls_x509_crt_init(&cert))) goto err;

where = US"generating pkey";    /* Hangs on 2.12.23 */
if ((rc = gnutls_x509_privkey_generate(pkey, GNUTLS_PK_RSA,
#ifdef SUPPORT_PARAM_TO_PK_BITS
# ifndef GNUTLS_SEC_PARAM_MEDIUM
#  define GNUTLS_SEC_PARAM_MEDIUM GNUTLS_SEC_PARAM_HIGH
# endif
            gnutls_sec_param_to_pk_bits(GNUTLS_PK_RSA, GNUTLS_SEC_PARAM_MEDIUM),
#else
            2048,
#endif
            0)))
  goto err;

where = US"configuring cert";
now = 1;
if (  (rc = gnutls_x509_crt_set_version(cert, 3))
   || (rc = gnutls_x509_crt_set_serial(cert, &now, sizeof(now)))
   || (rc = gnutls_x509_crt_set_activation_time(cert, now = time(NULL)))
   || (rc = gnutls_x509_crt_set_expiration_time(cert, now + (long)2 * 60 * 60)) /* 2 hour */
   || (rc = gnutls_x509_crt_set_key(cert, pkey))

   || (rc = gnutls_x509_crt_set_dn_by_oid(cert,
              GNUTLS_OID_X520_COUNTRY_NAME, 0, "UK", 2))
   || (rc = gnutls_x509_crt_set_dn_by_oid(cert,
              GNUTLS_OID_X520_ORGANIZATION_NAME, 0, "Exim Developers", 15))
   || (rc = gnutls_x509_crt_set_dn_by_oid(cert,
              GNUTLS_OID_X520_COMMON_NAME, 0,
              smtp_active_hostname, Ustrlen(smtp_active_hostname)))
   )
  goto err;

where = US"signing cert";
if ((rc = gnutls_x509_crt_sign(cert, cert, pkey))) goto err;

where = US"installing selfsign cert";
                                        /* Since: 2.4.0 */
if ((rc = gnutls_certificate_set_x509_key(state->lib_state.x509_cred,
    &cert, 1, pkey)))
  goto err;

rc = OK;

out:
  if (cert) gnutls_x509_crt_deinit(cert);
  if (pkey) gnutls_x509_privkey_deinit(pkey);
  return rc;

err:
  rc = tls_error_gnu(state, where, rc, errstr);
  goto out;
}




/* Add certificate and key, from files.

Return:
  Zero or negative: good.  Negate value for certificate index if < 0.
  Greater than zero: FAIL or DEFER code.
*/

static int
tls_add_certfile(exim_gnutls_state_st * state, const host_item * host,
  const uschar * certfile, const uschar * keyfile, uschar ** errstr)
{
int rc = gnutls_certificate_set_x509_key_file(state->lib_state.x509_cred,
    CCS certfile, CCS keyfile, GNUTLS_X509_FMT_PEM);
if (rc < 0)
  return tls_error_gnu(state,
    string_sprintf("cert/key setup: cert=%s key=%s", certfile, keyfile),
    rc, errstr);
return -rc;
}


#if !defined(DISABLE_OCSP) && !defined(SUPPORT_GNUTLS_EXT_RAW_PARSE)
/* Load an OCSP proof from file for sending by the server.  Called
on getting a status-request handshake message, for earlier versions
of GnuTLS. */

static int
server_ocsp_stapling_cb(gnutls_session_t session, void * ptr,
  gnutls_datum_t * ocsp_response)
{
int ret;
DEBUG(D_tls) debug_printf("OCSP stapling callback: %s\n", US ptr);

if ((ret = gnutls_load_file(ptr, ocsp_response)) < 0)
  {
  DEBUG(D_tls) debug_printf("Failed to load ocsp stapling file %s\n",
                              CS ptr);
  tls_in.ocsp = OCSP_NOT_RESP;
  return GNUTLS_E_NO_CERTIFICATE_STATUS;
  }

tls_in.ocsp = OCSP_VFY_NOT_TRIED;
return 0;
}
#endif


#ifdef SUPPORT_GNUTLS_EXT_RAW_PARSE
/* Make a note that we saw a status-request */
static int
tls_server_clienthello_ext(void * ctx, unsigned tls_id,
  const uschar * data, unsigned size)
{
/* The values for tls_id are documented here:
https://www.iana.org/assignments/tls-extensiontype-values/tls-extensiontype-values.xhtml */
switch (tls_id)
  {
  case 5:       /* Status Request */
    DEBUG(D_tls) debug_printf("Seen status_request extension from client\n");
    tls_in.ocsp = OCSP_NOT_RESP;
    break;
#ifdef EXIM_HAVE_ALPN
  case 16:      /* Application Layer Protocol Notification */
    /* The format of "data" here doesn't seem to be documented, but appears
    to be a 2-byte field with a (redundant, given the "size" arg) total length
    then a sequence of one-byte size then string (not nul-term) names.  The
    latter is as described in OpenSSL documentation.
    Note that we do not get called for a match_fail, making it hard to log
    a single bad ALPN being offered (the common case). */
    {
    gstring * g = NULL;

    DEBUG(D_tls) debug_printf("Seen ALPN extension from client (s=%u):", size);
    for (const uschar * s = data+2; s-data < size-1; s += *s + 1)
      {
      server_seen_alpn++;
      g = string_append_listele_n(g, ':', s+1, *s);
      DEBUG(D_tls) debug_printf(" '%.*s'", (int)*s, s+1);
      }
    DEBUG(D_tls) debug_printf("\n");
    if (server_seen_alpn > 1)
      {
      log_write(0, LOG_MAIN, "TLS ALPN (%Y) rejected", g);
      DEBUG(D_tls) debug_printf("TLS: too many ALPNs presented in handshake\n");
      return GNUTLS_E_NO_APPLICATION_PROTOCOL;
      }
    break;
    }
#endif
  }
return 0;
}

/* Callback for client-hello, on server, if we think we might serve stapled-OCSP */
static int
tls_server_clienthello_cb(gnutls_session_t session, unsigned int htype,
  unsigned when, unsigned int incoming, const gnutls_datum_t * msg)
{
/* Call fn for each extension seen.  3.6.3 onwards */
int rc = gnutls_ext_raw_parse(NULL, tls_server_clienthello_ext, msg,
                           GNUTLS_EXT_RAW_FLAG_TLS_CLIENT_HELLO);
return rc == GNUTLS_E_REQUESTED_DATA_NOT_AVAILABLE ? 0 : rc;
}


# ifdef notdef_crashes
/* Make a note that we saw a status-response */
static int
tls_server_servercerts_ext(void * ctx, unsigned tls_id,
  const unsigned char *data, unsigned size)
{
/* debug_printf("%s %u\n", __FUNCTION__, tls_id); */
/* https://www.iana.org/assignments/tls-extensiontype-values/tls-extensiontype-values.xhtml */
if (FALSE && tls_id == 5)       /* status_request */
  {
  DEBUG(D_tls) debug_printf("Seen status_request extension\n");
  tls_in.ocsp = exim_testharness_disable_ocsp_validity_check
    ? OCSP_VFY_NOT_TRIED : OCSP_VFIED;  /* We know that GnuTLS verifies responses */
  }
return 0;
}
# endif

/* Callback for certificates packet, on server, if we think we might serve stapled-OCSP */
static int
tls_server_servercerts_cb(gnutls_session_t session, unsigned int htype,
  unsigned when, unsigned int incoming, const gnutls_datum_t * msg)
{
/* Call fn for each extension seen.  3.6.3 onwards */
# ifdef notdef_crashes
                                /*XXX crashes */
return gnutls_ext_raw_parse(NULL, tls_server_servercerts_ext, msg, 0);
# endif
}
#endif /*SUPPORT_GNUTLS_EXT_RAW_PARSE*/

/*XXX in tls1.3 the cert-status travel as an extension next to the cert, in the
 "Handshake Protocol: Certificate" record.
So we need to spot the Certificate handshake message, parse it and spot any status_request extension(s)

This is different to tls1.2 - where it is a separate record (wireshark term) / handshake message (gnutls term).
*/

#if defined(EXIM_HAVE_TLS_RESUME) || defined(SUPPORT_GNUTLS_EXT_RAW_PARSE)
/* Callback for certificate-status, on server. We sent stapled OCSP. */
static int
tls_server_certstatus_cb(gnutls_session_t session, unsigned int htype,
  unsigned when, unsigned int incoming, const gnutls_datum_t * msg)
{
DEBUG(D_tls) debug_printf("Sending certificate-status\n");              /*XXX we get this for tls1.2 but not for 1.3 */
# ifdef SUPPORT_SRV_OCSP_STACK
tls_in.ocsp = exim_testharness_disable_ocsp_validity_check
  ? OCSP_VFY_NOT_TRIED : OCSP_VFIED;    /* We know that GnuTLS verifies responses */
# else
tls_in.ocsp = OCSP_VFY_NOT_TRIED;
# endif
return 0;
}

/* Callback for handshake messages, on server */
static int
tls_server_hook_cb(gnutls_session_t sess, u_int htype, unsigned when,
  unsigned incoming, const gnutls_datum_t * msg)
{
/* debug_printf("%s: htype %u\n", __FUNCTION__, htype); */
switch (htype)
  {
# ifdef SUPPORT_GNUTLS_EXT_RAW_PARSE
  case GNUTLS_HANDSHAKE_CLIENT_HELLO:
    return tls_server_clienthello_cb(sess, htype, when, incoming, msg);
  case GNUTLS_HANDSHAKE_CERTIFICATE_PKT:
    return tls_server_servercerts_cb(sess, htype, when, incoming, msg);
# endif
  case GNUTLS_HANDSHAKE_CERTIFICATE_STATUS:
    return tls_server_certstatus_cb(sess, htype, when, incoming, msg);
# ifdef EXIM_HAVE_TLS_RESUME
  case GNUTLS_HANDSHAKE_NEW_SESSION_TICKET:
    return tls_server_ticket_cb(sess, htype, when, incoming, msg);
# endif
  default:
    return 0;
  }
}
#endif


#if !defined(DISABLE_OCSP) && defined(SUPPORT_GNUTLS_EXT_RAW_PARSE)
static void
tls_server_testharness_ocsp_fiddle(void)
{
extern char ** environ;
if (environ) for (uschar ** p = USS environ; *p; p++)
  if (Ustrncmp(*p, "EXIM_TESTHARNESS_DISABLE_OCSPVALIDITYCHECK", 42) == 0)
    {
    DEBUG(D_tls) debug_printf("Permitting known bad OCSP response\n");
    exim_testharness_disable_ocsp_validity_check = TRUE;
    }
}
#endif

/**************************************************
* One-time init credentials for server and client *
**************************************************/

static void
creds_basic_init(gnutls_certificate_credentials_t x509_cred, BOOL server)
{
#ifdef SUPPORT_SRV_OCSP_STACK
gnutls_certificate_set_flags(x509_cred, GNUTLS_CERTIFICATE_API_V2);

# if !defined(DISABLE_OCSP) && defined(SUPPORT_GNUTLS_EXT_RAW_PARSE)
if (server && tls_ocsp_file)
  {
  if (f.running_in_test_harness)
    tls_server_testharness_ocsp_fiddle();

  if (exim_testharness_disable_ocsp_validity_check)
    gnutls_certificate_set_flags(x509_cred,
      GNUTLS_CERTIFICATE_API_V2 | GNUTLS_CERTIFICATE_SKIP_OCSP_RESPONSE_CHECK);
  }
# endif
#endif
DEBUG(D_tls)
  debug_printf("TLS: basic cred init, %s\n", server ? "server" : "client");
}

/* Returns OK/DEFER/FAIL */
static int
creds_load_server_certs(exim_gnutls_state_st * state, const uschar * cert,
  const uschar * pkey, const uschar * ocsp, uschar ** errstr)
{
const uschar * clist = cert;
const uschar * klist = pkey;
const uschar * olist;
int csep = 0, ksep = 0, osep = 0, cnt = 0, rc;
uschar * cfile, * kfile, * ofile;
#ifndef DISABLE_OCSP
# ifdef SUPPORT_GNUTLS_EXT_RAW_PARSE
gnutls_x509_crt_fmt_t ocsp_fmt = GNUTLS_X509_FMT_DER;
# endif

if (!expand_check(ocsp, US"tls_ocsp_file", &ofile, errstr))
  return DEFER;
olist = ofile;
#endif

while (cfile = string_nextinlist(&clist, &csep, NULL, 0))

  if (!(kfile = string_nextinlist(&klist, &ksep, NULL, 0)))
    return tls_error(US"cert/key setup: out of keys", NULL, NULL, errstr);
  else if ((rc = tls_add_certfile(state, NULL, cfile, kfile, errstr)) > OK)
    return rc;
  else
    {
    int gnutls_cert_index = -rc;
    DEBUG(D_tls) debug_printf("TLS: cert/key %d %s registered\n",
                              gnutls_cert_index, cfile);

#ifndef DISABLE_OCSP
    if (ocsp)
      {
      /* Set the OCSP stapling server info */
      if (gnutls_buggy_ocsp)
        {
        DEBUG(D_tls)
          debug_printf("GnuTLS library is buggy for OCSP; avoiding\n");
        }
      else if ((ofile = string_nextinlist(&olist, &osep, NULL, 0)))
        {
        DEBUG(D_tls) debug_printf("OCSP response file %d  = %s\n",
                                  gnutls_cert_index, ofile);
# ifdef SUPPORT_GNUTLS_EXT_RAW_PARSE
        if (Ustrncmp(ofile, US"PEM ", 4) == 0)
          {
          ocsp_fmt = GNUTLS_X509_FMT_PEM;
          ofile += 4;
          }
        else if (Ustrncmp(ofile, US"DER ", 4) == 0)
          {
          ocsp_fmt = GNUTLS_X509_FMT_DER;
          ofile += 4;
          }

        if  ((rc = gnutls_certificate_set_ocsp_status_request_file2(
                  state->lib_state.x509_cred, CCS ofile, gnutls_cert_index,
                  ocsp_fmt)) < 0)
          return tls_error_gnu(state,
                  US"gnutls_certificate_set_ocsp_status_request_file2",
                  rc, errstr);
        DEBUG(D_tls)
          debug_printf(" %d response%s loaded\n", rc, rc>1 ? "s":"");

        /* Arrange callbacks for OCSP request observability */

        if (state->session)
          gnutls_handshake_set_hook_function(state->session,
            GNUTLS_HANDSHAKE_ANY, GNUTLS_HOOK_POST, tls_server_hook_cb);
        else
          state->lib_state.ocsp_hook = TRUE;


# else
#  if defined(SUPPORT_SRV_OCSP_STACK)
        if ((rc = gnutls_certificate_set_ocsp_status_request_function2(
                     state->lib_state.x509_cred, gnutls_cert_index,
                     server_ocsp_stapling_cb, ofile)))
            return tls_error_gnu(state,
                  US"gnutls_certificate_set_ocsp_status_request_function2",
                  rc, errstr);
        else
#  endif
          {
          if (cnt++ > 0)
            {
            DEBUG(D_tls)
              debug_printf("oops; multiple OCSP files not supported\n");
            break;
            }
          gnutls_certificate_set_ocsp_status_request_function(
            state->lib_state.x509_cred, server_ocsp_stapling_cb, ofile);
          }
# endif /* SUPPORT_GNUTLS_EXT_RAW_PARSE */
        }
      else
        DEBUG(D_tls) debug_printf("ran out of OCSP response files in list\n");
      }
#endif /* DISABLE_OCSP */
    }
return OK;
}

static int
creds_load_client_certs(exim_gnutls_state_st * state, const host_item * host,
  const uschar * cert, const uschar * pkey, uschar ** errstr)
{
int rc = tls_add_certfile(state, host, cert, pkey, errstr);
if (rc > 0) return rc;
DEBUG(D_tls) debug_printf("TLS: cert/key registered\n");
return OK;
}

static int
creds_load_cabundle(exim_gnutls_state_st * state, const uschar * bundle,
  const host_item * host, uschar ** errstr)
{
int cert_count;
struct stat statbuf;

#ifdef SUPPORT_SYSDEFAULT_CABUNDLE
if (Ustrcmp(bundle, "system") == 0 || Ustrncmp(bundle, "system,", 7) == 0)
  cert_count = gnutls_certificate_set_x509_system_trust(state->lib_state.x509_cred);
else
#endif
  {
  if (Ustat(bundle, &statbuf) < 0)
    {
    log_write(0, LOG_MAIN|LOG_PANIC, "could not stat '%s' "
        "(tls_verify_certificates): %s", bundle, strerror(errno));
    return DEFER;
    }

#ifndef SUPPORT_CA_DIR
  /* The test suite passes in /dev/null; we could check for that path explicitly,
  but who knows if someone has some weird FIFO which always dumps some certs, or
  other weirdness.  The thing we really want to check is that it's not a
  directory, since while OpenSSL supports that, GnuTLS does not.
  So s/!S_ISREG/S_ISDIR/ and change some messaging ... */
  if (S_ISDIR(statbuf.st_mode))
    {
    log_write(0, LOG_MAIN|LOG_PANIC,
        "tls_verify_certificates \"%s\" is a directory", bundle);
    return DEFER;
    }
#endif

  DEBUG(D_tls) debug_printf("verify certificates = %s size=" OFF_T_FMT "\n",
          bundle, statbuf.st_size);

  if (statbuf.st_size == 0)
    {
    DEBUG(D_tls)
      debug_printf("cert file empty, no certs, no verification, ignoring any CRL\n");
    return OK;
    }

  cert_count =

#ifdef SUPPORT_CA_DIR
    (statbuf.st_mode & S_IFMT) == S_IFDIR
    ?
    gnutls_certificate_set_x509_trust_dir(state->lib_state.x509_cred,
      CS bundle, GNUTLS_X509_FMT_PEM)
    :
#endif
    gnutls_certificate_set_x509_trust_file(state->lib_state.x509_cred,
      CS bundle, GNUTLS_X509_FMT_PEM);

#ifdef SUPPORT_CA_DIR
  /* Mimic the behaviour with OpenSSL of not advertising a usable-cert list
  when using the directory-of-certs config model. */

  if ((statbuf.st_mode & S_IFMT) == S_IFDIR)
    if (state->session)
      gnutls_certificate_send_x509_rdn_sequence(state->session, 1);
    else
      state->lib_state.ca_rdn_emulate = TRUE;
#endif
  }

if (cert_count < 0)
  return tls_error_gnu(state, US"setting certificate trust", cert_count, errstr);
DEBUG(D_tls)
  debug_printf("Added %d certificate authorities\n", cert_count);

return OK;
}


static int
creds_load_crl(exim_gnutls_state_st * state, const uschar * crl, uschar ** errstr)
{
int cert_count;
DEBUG(D_tls) debug_printf("loading CRL file = %s\n", crl);
if ((cert_count = gnutls_certificate_set_x509_crl_file(state->lib_state.x509_cred,
    CS crl, GNUTLS_X509_FMT_PEM)) < 0)
  return tls_error_gnu(state, US"gnutls_certificate_set_x509_crl_file",
            cert_count, errstr);

DEBUG(D_tls) debug_printf("Processed %d CRLs\n", cert_count);
return OK;
}


static int
creds_load_pristring(exim_gnutls_state_st * state, const uschar * p,
  const char ** errpos)
{
if (!p)
  {
  p = exim_default_gnutls_priority;
  DEBUG(D_tls)
    debug_printf("GnuTLS using default session cipher/priority \"%s\"\n", p);
  }
return gnutls_priority_init( (gnutls_priority_t *) &state->lib_state.pri_cache,
  CCS p, errpos);
}

static unsigned
tls_server_creds_init(void)
{
uschar * dummy_errstr;
unsigned lifetime = 0;

state_server.lib_state = null_tls_preload;
if (gnutls_certificate_allocate_credentials(
      (gnutls_certificate_credentials_t *) &state_server.lib_state.x509_cred))
  {
  state_server.lib_state.x509_cred = NULL;
  return lifetime;
  }
creds_basic_init(state_server.lib_state.x509_cred, TRUE);

#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
/* If tls_certificate has any $ indicating expansions, it is not good.
If tls_privatekey is set but has $, not good.  Likewise for tls_ocsp_file.
If all good (and tls_certificate set), load the cert(s). */

if (  opt_set_and_noexpand(tls_certificate)
# ifndef DISABLE_OCSP
   && opt_unset_or_noexpand(tls_ocsp_file)
# endif
   && opt_unset_or_noexpand(tls_privatekey))
  {
  /* Set watches on the filenames.  The implementation does de-duplication
  so we can just blindly do them all.
  */

  if (  tls_set_watch(tls_certificate, TRUE)
# ifndef DISABLE_OCSP
     && tls_set_watch(tls_ocsp_file, TRUE)
# endif
     && tls_set_watch(tls_privatekey, TRUE))
    {
    DEBUG(D_tls) debug_printf("TLS: preloading server certs\n");
    if (creds_load_server_certs(&state_server, tls_certificate,
          tls_privatekey && *tls_privatekey ? tls_privatekey : tls_certificate,
# ifdef DISABLE_OCSP
          NULL,
# else
          tls_ocsp_file,
# endif
          &dummy_errstr) == 0)
      state_server.lib_state.conn_certs = TRUE;
    }
  }
else if (  !tls_certificate && !tls_privatekey
# ifndef DISABLE_OCSP
        && !tls_ocsp_file
# endif
        )
  {             /* Generate & preload a selfsigned cert. No files to watch. */
  if ((tls_install_selfsign(&state_server, &dummy_errstr)) == OK)
    {
    state_server.lib_state.conn_certs = TRUE;
    lifetime = f.running_in_test_harness ? 2 : 60 * 60;         /* 1 hour */
    }
  }
else
  DEBUG(D_tls) debug_printf("TLS: not preloading server certs\n");

/* If tls_verify_certificates is non-empty and has no $, load CAs.
If none was configured and we can't handle "system", treat as empty. */

if (  opt_set_and_noexpand(tls_verify_certificates)
#ifndef SUPPORT_SYSDEFAULT_CABUNDLE
   && Ustrcmp(tls_verify_certificates, "system") != 0
#endif
   )
  {
  if (tls_set_watch(tls_verify_certificates, FALSE))
    {
    DEBUG(D_tls) debug_printf("TLS: preloading CA bundle for server\n");
    if (creds_load_cabundle(&state_server, tls_verify_certificates,
                            NULL, &dummy_errstr) != OK)
      return lifetime;
    state_server.lib_state.cabundle = TRUE;

    /* If CAs loaded and tls_crl is non-empty and has no $, load it */

    if (opt_set_and_noexpand(tls_crl))
      {
      if (tls_set_watch(tls_crl, FALSE))
        {
        DEBUG(D_tls) debug_printf("TLS: preloading CRL for server\n");
        if (creds_load_crl(&state_server, tls_crl, &dummy_errstr) != OK)
          return lifetime;
        state_server.lib_state.crl = TRUE;
        }
      }
    else
      DEBUG(D_tls) debug_printf("TLS: not preloading CRL for server\n");
    }
  }
else
  DEBUG(D_tls) debug_printf("TLS: not preloading CA bundle for server\n");
#endif  /* EXIM_HAVE_INOTIFY */

/* If tls_require_ciphers is non-empty and has no $, load the
ciphers priority cache.  If unset, load with the default.
(server-only as the client one depends on non/DANE) */

if (!tls_require_ciphers || opt_set_and_noexpand(tls_require_ciphers))
  {
  const char * dummy_errpos;
  DEBUG(D_tls) debug_printf("TLS: preloading cipher list for server: %s\n",
                  tls_require_ciphers);
  if (  creds_load_pristring(&state_server, tls_require_ciphers, &dummy_errpos)
     == OK)
    state_server.lib_state.pri_string = TRUE;
  }
else
  DEBUG(D_tls) debug_printf("TLS: not preloading cipher list for server\n");
return lifetime;
}


/* Preload whatever creds are static, onto a transport.  The client can then
just copy the pointer as it starts up. */

/*XXX this is not called for a cmdline send. But one needing to use >1 conn would benefit,
and there seems little downside. */

static void
tls_client_creds_init(transport_instance * t, BOOL watch)
{
smtp_transport_options_block * ob = t->options_block;
exim_gnutls_state_st tpt_dummy_state;
host_item * dummy_host = (host_item *)1;
uschar * dummy_errstr;

if (  !exim_gnutls_base_init_done
   && tls_g_init(&dummy_errstr) != OK)
  return;

ob->tls_preload = null_tls_preload;
if (gnutls_certificate_allocate_credentials(
  (struct gnutls_certificate_credentials_st **)&ob->tls_preload.x509_cred))
  {
  ob->tls_preload.x509_cred = NULL;
  return;
  }
creds_basic_init(ob->tls_preload.x509_cred, FALSE);

tpt_dummy_state.session = NULL;
tpt_dummy_state.lib_state = ob->tls_preload;

#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
if (  opt_set_and_noexpand(ob->tls_certificate)
   && opt_unset_or_noexpand(ob->tls_privatekey))
  {
  if (  !watch
     || (  tls_set_watch(ob->tls_certificate, FALSE)
        && tls_set_watch(ob->tls_privatekey, FALSE)
     )  )
    {
    const uschar * pkey = ob->tls_privatekey;

    DEBUG(D_tls)
      debug_printf("TLS: preloading client certs for transport '%s'\n", t->name);

    /* The state->lib_state.x509_cred is used for the certs load, and is the sole
    structure element used.  So we can set up a dummy.  The hoat arg only
    selects a retcode in case of fail, so any value */

    if (creds_load_client_certs(&tpt_dummy_state, dummy_host,
          ob->tls_certificate, pkey ? pkey : ob->tls_certificate,
          &dummy_errstr) == OK)
      ob->tls_preload.conn_certs = TRUE;
    }
  }
else
  DEBUG(D_tls)
    debug_printf("TLS: not preloading client certs, for transport '%s'\n", t->name);

/* If tls_verify_certificates is non-empty and has no $, load CAs.
If none was configured and we can't handle "system", treat as empty. */

if (  opt_set_and_noexpand(ob->tls_verify_certificates)
#ifndef SUPPORT_SYSDEFAULT_CABUNDLE
   && Ustrcmp(ob->tls_verify_certificates, "system") != 0
#endif
   )
  {
  if (!watch || tls_set_watch(ob->tls_verify_certificates, FALSE))
    {
    DEBUG(D_tls)
      debug_printf("TLS: preloading CA bundle for transport '%s'\n", t->name);
    if (creds_load_cabundle(&tpt_dummy_state, ob->tls_verify_certificates,
                            dummy_host, &dummy_errstr) != OK)
      return;
    ob->tls_preload.cabundle = TRUE;

    if (opt_set_and_noexpand(ob->tls_crl))
      {
      if (!watch || tls_set_watch(ob->tls_crl, FALSE))
        {
        DEBUG(D_tls) debug_printf("TLS: preloading CRL for transport '%s'\n", t->name);
        if (creds_load_crl(&tpt_dummy_state, ob->tls_crl, &dummy_errstr) != OK)
          return;
        ob->tls_preload.crl = TRUE;
        }
      }
    else
      DEBUG(D_tls) debug_printf("TLS: not preloading CRL, for transport '%s'\n", t->name);
    }
  }
else
  DEBUG(D_tls)
      debug_printf("TLS: not preloading CA bundle, for transport '%s'\n", t->name);

/* We do not preload tls_require_ciphers to to the transport as it implicitly
depends on DANE or plain usage. */

#endif
}


#if defined(EXIM_HAVE_INOTIFY) || defined(EXIM_HAVE_KEVENT)
/* Invalidate the creds cached, by dropping the current ones.
Call when we notice one of the source files has changed. */
 
static void
tls_server_creds_invalidate(void)
{
if (state_server.lib_state.pri_cache)
  gnutls_priority_deinit(state_server.lib_state.pri_cache);
state_server.lib_state.pri_cache = NULL;

if (state_server.lib_state.x509_cred)
  gnutls_certificate_free_credentials(state_server.lib_state.x509_cred);
state_server.lib_state = null_tls_preload;
}


static void
tls_client_creds_invalidate(transport_instance * t)
{
smtp_transport_options_block * ob = t->options_block;
if (ob->tls_preload.x509_cred)
  gnutls_certificate_free_credentials(ob->tls_preload.x509_cred);
ob->tls_preload = null_tls_preload;
}
#endif


/*************************************************
*       Variables re-expanded post-SNI           *
*************************************************/

/* Called from both server and client code, via tls_init(), and also from
the SNI callback after receiving an SNI, if tls_certificate includes "tls_sni".

We can tell the two apart by state->received_sni being non-NULL in callback.

The callback should not call us unless state->trigger_sni_changes is true,
which we are responsible for setting on the first pass through.

Arguments:
  state           exim_gnutls_state_st *
  errstr          error string pointer

Returns:          OK/DEFER/FAIL
*/

static int
tls_expand_session_files(exim_gnutls_state_st * state, uschar ** errstr)
{
int rc;
const host_item *host = state->host;  /* macro should be reconsidered? */
const uschar *saved_tls_certificate = NULL;
const uschar *saved_tls_privatekey = NULL;
const uschar *saved_tls_verify_certificates = NULL;
const uschar *saved_tls_crl = NULL;
int cert_count;

/* We check for tls_sni *before* expansion. */
if (!host)      /* server */
  if (!state->received_sni)
    {
    if (  state->tls_certificate
       && (  Ustrstr(state->tls_certificate, US"tls_sni")
          || Ustrstr(state->tls_certificate, US"tls_in_sni")
          || Ustrstr(state->tls_certificate, US"tls_out_sni")
       )  )
      {
      DEBUG(D_tls) debug_printf("We will re-expand TLS session files if we receive SNI\n");
      state->trigger_sni_changes = TRUE;
      }
    }
  else  /* SNI callback case */
    {
    /* useful for debugging */
    saved_tls_certificate = state->exp_tls_certificate;
    saved_tls_privatekey = state->exp_tls_privatekey;
    saved_tls_verify_certificates = state->exp_tls_verify_certificates;
    saved_tls_crl = state->exp_tls_crl;
    }

if (!state->lib_state.x509_cred)
  {
  if ((rc = gnutls_certificate_allocate_credentials(
        (gnutls_certificate_credentials_t *) &state->lib_state.x509_cred)))
    return tls_error_gnu(state, US"gnutls_certificate_allocate_credentials",
            rc, errstr);
  creds_basic_init(state->lib_state.x509_cred, !host);
  }


/* remember: Expand_check_tlsvar() is expand_check() but fiddling with
state members, assuming consistent naming; and expand_check() returns
false if expansion failed, unless expansion was forced to fail. */

/* check if we at least have a certificate, before doing expensive
D-H generation. */

if (!state->lib_state.conn_certs)
  {
  if (  !Expand_check_tlsvar(tls_certificate, errstr)
     || f.expand_string_forcedfail)
    {
    if (f.expand_string_forcedfail)
      *errstr = US"expansion of tls_certificate failed";
    return DEFER;
    }

  /* certificate is mandatory in server, optional in client */

  if (  !state->exp_tls_certificate
     || !*state->exp_tls_certificate
     )
    if (!host)
      return tls_install_selfsign(state, errstr);
    else
      DEBUG(D_tls) debug_printf("TLS: no client certificate specified; okay\n");

  if (  state->tls_privatekey && !Expand_check_tlsvar(tls_privatekey, errstr)
     || f.expand_string_forcedfail
     )
    {
    if (f.expand_string_forcedfail)
      *errstr = US"expansion of tls_privatekey failed";
    return DEFER;
    }

  /* tls_privatekey is optional, defaulting to same file as certificate */

  if (!state->tls_privatekey || !*state->tls_privatekey)
    {
    state->tls_privatekey = state->tls_certificate;
    state->exp_tls_privatekey = state->exp_tls_certificate;
    }

  if (state->exp_tls_certificate && *state->exp_tls_certificate)
    {
    BOOL load = TRUE;
    DEBUG(D_tls) debug_printf("certificate file = %s\nkey file = %s\n",
        state->exp_tls_certificate, state->exp_tls_privatekey);

    if (state->received_sni)
      if (  Ustrcmp(state->exp_tls_certificate, saved_tls_certificate) == 0
         && Ustrcmp(state->exp_tls_privatekey,  saved_tls_privatekey)  == 0
         )
        {
        DEBUG(D_tls) debug_printf("TLS SNI: cert and key unchanged\n");
        load = FALSE;   /* avoid re-loading the same certs */
        }
      else              /* unload the pre-SNI certs before loading new ones */
        {
        DEBUG(D_tls) debug_printf("TLS SNI: have a changed cert/key pair\n");
        gnutls_certificate_free_keys(state->lib_state.x509_cred);
        }

    if (  load
       && (rc = host
          ? creds_load_client_certs(state, host, state->exp_tls_certificate,
                              state->exp_tls_privatekey, errstr)
          : creds_load_server_certs(state, state->exp_tls_certificate,
                              state->exp_tls_privatekey,
#ifdef DISABLE_OCSP
                              NULL,
#else
                              tls_ocsp_file,
#endif
                              errstr)
       )  )
      {
      DEBUG(D_tls) debug_printf("load-cert: '%s'\n", *errstr);
      return rc;
      }
    }
  }
else
  {
  DEBUG(D_tls)
    debug_printf("%s certs were preloaded\n", host ? "client" : "server");

  if (!state->tls_privatekey) state->tls_privatekey = state->tls_certificate;
  state->exp_tls_certificate = US state->tls_certificate;
  state->exp_tls_privatekey = US state->tls_privatekey;

#ifdef SUPPORT_GNUTLS_EXT_RAW_PARSE
  if (state->lib_state.ocsp_hook)
     gnutls_handshake_set_hook_function(state->session,
       GNUTLS_HANDSHAKE_ANY, GNUTLS_HOOK_POST, tls_server_hook_cb);
#endif
  }


/* Set the trusted CAs file if one is provided, and then add the CRL if one is
provided. Experiment shows that, if the certificate file is empty, an unhelpful
error message is provided. However, if we just refrain from setting anything up
in that case, certificate verification fails, which seems to be the correct
behaviour.
If none was configured and we can't handle "system", treat as empty. */

if (!state->lib_state.cabundle)
  {
  if (state->tls_verify_certificates && *state->tls_verify_certificates)
    {
    if (!Expand_check_tlsvar(tls_verify_certificates, errstr))
      return DEFER;
#ifndef SUPPORT_SYSDEFAULT_CABUNDLE
    if (Ustrcmp(state->exp_tls_verify_certificates, "system") == 0)
      state->exp_tls_verify_certificates = NULL;
#endif
    if (state->tls_crl && *state->tls_crl)
      if (!Expand_check_tlsvar(tls_crl, errstr))
        return DEFER;

    if (!(state->exp_tls_verify_certificates &&
          *state->exp_tls_verify_certificates))
      {
      DEBUG(D_tls)
        debug_printf("TLS: tls_verify_certificates expanded empty, ignoring\n");
      /* With no tls_verify_certificates, we ignore tls_crl too */
      return OK;
      }
    }
  else
    {
    DEBUG(D_tls)
      debug_printf("TLS: tls_verify_certificates not set or empty, ignoring\n");
    return OK;
    }
  rc = creds_load_cabundle(state, state->exp_tls_verify_certificates, host, errstr);
  if (rc != OK) return rc;
  }
else
  {
  DEBUG(D_tls)
    debug_printf("%s CA bundle was preloaded\n", host ? "client" : "server");
  state->exp_tls_verify_certificates = US state->tls_verify_certificates;

#ifdef SUPPORT_CA_DIR
/* Mimic the behaviour with OpenSSL of not advertising a usable-cert list
when using the directory-of-certs config model. */
    if (state->lib_state.ca_rdn_emulate)
      gnutls_certificate_send_x509_rdn_sequence(state->session, 1);
#endif
  }


if (!state->lib_state.crl)
  {
  if (  state->tls_crl && *state->tls_crl
     && state->exp_tls_crl && *state->exp_tls_crl)
    return creds_load_crl(state, state->exp_tls_crl, errstr);
  }
else
  {
  DEBUG(D_tls)
      debug_printf("%s CRL was preloaded\n", host ? "client" : "server");
  state->exp_tls_crl = US state->tls_crl;
  }

return OK;
}




/*************************************************
*          Set X.509 state variables             *
*************************************************/

/* In GnuTLS, the registered cert/key are not replaced by a later
set of a cert/key, so for SNI support we need a whole new x509_cred
structure.  Which means various other non-re-expanded pieces of state
need to be re-set in the new struct, so the setting logic is pulled
out to this.

Arguments:
  state           exim_gnutls_state_st *
  errstr          error string pointer

Returns:          OK/DEFER/FAIL
*/

static int
tls_set_remaining_x509(exim_gnutls_state_st * state, uschar ** errstr)
{
int rc = OK;
const host_item * host = state->host;  /* macro should be reconsidered? */

/* Create D-H parameters, or read them from the cache file. This function does
its own SMTP error messaging. This only happens for the server, TLS D-H ignores
client-side params. */

if (!state->host)
  {
  if (!dh_server_params)
    if ((rc = init_server_dh(errstr)) == DEFER) return rc;

  /* Unnecessary & discouraged with 3.6.0 or later, according to docs.  But without it,
  no DHE- ciphers are advertised. */

  if (rc == OK)
    gnutls_certificate_set_dh_params(state->lib_state.x509_cred, dh_server_params);
  }

/* Link the credentials to the session. */

if ((rc = gnutls_credentials_set(state->session,
            GNUTLS_CRD_CERTIFICATE, state->lib_state.x509_cred)))
  return tls_error_gnu(state, US"gnutls_credentials_set", rc, errstr);

return OK;
}

/*************************************************
*            Initialize for GnuTLS               *
*************************************************/


/* Called from both server and client code. In the case of a server, errors
before actual TLS negotiation return DEFER.

Arguments:
  host            connected host, if client; NULL if server
  ob              tranport options block, if client; NULL if server
  require_ciphers tls_require_ciphers setting
  caller_state    returned state-info structure
  errstr          error string pointer

Returns:          OK/DEFER/FAIL
*/

static int
tls_init(
    const host_item *host,
    smtp_transport_options_block * ob,
    const uschar * require_ciphers,
    exim_gnutls_state_st **caller_state,
    tls_support * tlsp,
    uschar ** errstr)
{
exim_gnutls_state_st * state;
int rc;
size_t sz;

if (  !exim_gnutls_base_init_done
   && (rc = tls_g_init(errstr)) != OK)
  return rc;

if (host)
  {
  /* For client-side sessions we allocate a context. This lets us run
  several in parallel. */

  int old_pool = store_pool;
  store_pool = POOL_PERM;
  state = store_get(sizeof(exim_gnutls_state_st), GET_UNTAINTED);
  store_pool = old_pool;

  memcpy(state, &exim_gnutls_state_init, sizeof(exim_gnutls_state_init));
  state->lib_state = ob->tls_preload;
  state->tlsp = tlsp;
  DEBUG(D_tls) debug_printf("initialising GnuTLS client session\n");
  rc = gnutls_init(&state->session, GNUTLS_CLIENT);

  state->tls_certificate =      ob->tls_certificate;
  state->tls_privatekey =       ob->tls_privatekey;
  state->tls_sni =              ob->tls_sni;
  state->tls_verify_certificates = ob->tls_verify_certificates;
  state->tls_crl =              ob->tls_crl;
  }
else
  {
  /* Server operations always use the one state_server context.  It is not
  shared because we have forked a fresh process for every receive.  However it
  can get re-used for successive TLS sessions on a single TCP connection. */

  state = &state_server;
  state->tlsp = tlsp;
  DEBUG(D_tls) debug_printf("initialising GnuTLS server session\n");
  rc = gnutls_init(&state->session, GNUTLS_SERVER);

  state->tls_certificate =      tls_certificate;
  state->tls_privatekey =       tls_privatekey;
  state->tls_sni =              NULL;
  state->tls_verify_certificates = tls_verify_certificates;
  state->tls_crl =              tls_crl;
  }
if (rc)
  return tls_error_gnu(state, US"gnutls_init", rc, errstr);

state->tls_require_ciphers =    require_ciphers;
state->host = host;

/* This handles the variables that might get re-expanded after TLS SNI;
tls_certificate, tls_privatekey, tls_verify_certificates, tls_crl */

DEBUG(D_tls)
  debug_printf("Expanding various TLS configuration options for session credentials\n");
if ((rc = tls_expand_session_files(state, errstr)) != OK) return rc;

/* These are all other parts of the x509_cred handling, since SNI in GnuTLS
requires a new structure afterwards. */

if ((rc = tls_set_remaining_x509(state, errstr)) != OK) return rc;

/* set SNI in client, only */
if (host)
  {
  if (!expand_check(state->tls_sni, US"tls_out_sni", &state->tlsp->sni, errstr))
    return DEFER;
  if (state->tlsp->sni && *state->tlsp->sni)
    {
    DEBUG(D_tls)
      debug_printf("Setting TLS client SNI to \"%s\"\n", state->tlsp->sni);
    sz = Ustrlen(state->tlsp->sni);
    if ((rc = gnutls_server_name_set(state->session,
          GNUTLS_NAME_DNS, state->tlsp->sni, sz)))
      return tls_error_gnu(state, US"gnutls_server_name_set", rc, errstr);
    }
  }
else if (state->tls_sni)
  DEBUG(D_tls) debug_printf("*** PROBABLY A BUG *** " \
      "have an SNI set for a server [%s]\n", state->tls_sni);

if (!state->lib_state.pri_string)
  {
  const uschar * p = NULL;
  const char * errpos;

  /* This is the priority string support,
  http://www.gnutls.org/manual/html_node/Priority-Strings.html
  and replaces gnutls_require_kx, gnutls_require_mac & gnutls_require_protocols.
  This was backwards incompatible, but means Exim no longer needs to track
  all algorithms and provide string forms for them. */

  if (state->tls_require_ciphers && *state->tls_require_ciphers)
    {
    if (!Expand_check_tlsvar(tls_require_ciphers, errstr))
      return DEFER;
    if (state->exp_tls_require_ciphers && *state->exp_tls_require_ciphers)
      {
      p = state->exp_tls_require_ciphers;
      DEBUG(D_tls) debug_printf("GnuTLS session cipher/priority \"%s\"\n", p);
      }
    }

  if ((rc = creds_load_pristring(state, p, &errpos)))
    return tls_error_gnu(state, string_sprintf(
                        "gnutls_priority_init(%s) failed at offset %ld, \"%.6s..\"",
                        p, (long)(errpos - CS p), errpos),
                    rc, errstr);
  }
else
  {
  DEBUG(D_tls) debug_printf("cipher list preloaded\n");
  state->exp_tls_require_ciphers = US state->tls_require_ciphers;
  }


if ((rc = gnutls_priority_set(state->session, state->lib_state.pri_cache)))
  return tls_error_gnu(state, US"gnutls_priority_set", rc, errstr);

/* This also sets the server ticket expiration time to the same, and
the STEK rotation time to 3x. */

gnutls_db_set_cache_expiration(state->session, ssl_session_timeout);

/* Reduce security in favour of increased compatibility, if the admin
decides to make that trade-off. */
if (gnutls_compat_mode)
  {
#if LIBGNUTLS_VERSION_NUMBER >= 0x020104
  DEBUG(D_tls) debug_printf("lowering GnuTLS security, compatibility mode\n");
  gnutls_session_enable_compatibility_mode(state->session);
#else
  DEBUG(D_tls) debug_printf("Unable to set gnutls_compat_mode - GnuTLS version too old\n");
#endif
  }

*caller_state = state;
return OK;
}



/*************************************************
*            Extract peer information            *
*************************************************/

static const uschar *
cipher_stdname_kcm(gnutls_kx_algorithm_t kx, gnutls_cipher_algorithm_t cipher,
  gnutls_mac_algorithm_t mac)
{
uschar cs_id[2];
gnutls_kx_algorithm_t kx_i;
gnutls_cipher_algorithm_t cipher_i;
gnutls_mac_algorithm_t mac_i;

for (size_t i = 0;
     gnutls_cipher_suite_info(i, cs_id, &kx_i, &cipher_i, &mac_i, NULL);
     i++)
  if (kx_i == kx && cipher_i == cipher && mac_i == mac)
    return cipher_stdname(cs_id[0], cs_id[1]);
return NULL;
}



/* Called from both server and client code.
Only this is allowed to set state->peerdn and state->have_set_peerdn
and we use that to detect double-calls.

NOTE: the state blocks last while the TLS connection is up, which is fine
for logging in the server side, but for the client side, we log after teardown
in src/deliver.c.  While the session is up, we can twist about states and
repoint tls_* globals, but those variables used for logging or other variable
expansion that happens _after_ delivery need to have a longer life-time.

So for those, we get the data from POOL_PERM; the re-invoke guard keeps us from
doing this more than once per generation of a state context.  We set them in
the state context, and repoint tls_* to them.  After the state goes away, the
tls_* copies of the pointers remain valid and client delivery logging is happy.

tls_certificate_verified is a BOOL, so the tls_peerdn and tls_cipher issues
don't apply.

Arguments:
  state           exim_gnutls_state_st *
  errstr          pointer to error string

Returns:          OK/DEFER/FAIL
*/

static int
peer_status(exim_gnutls_state_st * state, uschar ** errstr)
{
gnutls_session_t session = state->session;
const gnutls_datum_t * cert_list;
int old_pool, rc;
unsigned int cert_list_size = 0;
gnutls_protocol_t protocol;
gnutls_cipher_algorithm_t cipher;
gnutls_kx_algorithm_t kx;
gnutls_mac_algorithm_t mac;
gnutls_certificate_type_t ct;
gnutls_x509_crt_t crt;
uschar * dn_buf;
size_t sz;

if (state->have_set_peerdn)
  return OK;
state->have_set_peerdn = TRUE;

state->peerdn = NULL;

/* tls_cipher */
cipher = gnutls_cipher_get(session);
protocol = gnutls_protocol_get_version(session);
mac = gnutls_mac_get(session);
kx =
#ifdef GNUTLS_TLS1_3
    protocol >= GNUTLS_TLS1_3 ? 0 :
#endif
  gnutls_kx_get(session);

old_pool = store_pool;
  {
  tls_support * tlsp = state->tlsp;
  store_pool = POOL_PERM;

#ifdef SUPPORT_GNUTLS_SESS_DESC
    {
    gstring * g = NULL;
    uschar * s = US gnutls_session_get_desc(session), c;

    /* Nikos M suggests we use this by preference.  It returns like:
    (TLS1.3)-(ECDHE-SECP256R1)-(RSA-PSS-RSAE-SHA256)-(AES-256-GCM)

    For partial back-compat, put a colon after the TLS version, replace the
    )-( grouping with __, replace in-group - with _ and append the :keysize. */

    /* debug_printf("peer_status: gnutls_session_get_desc %s\n", s); */

    for (s++; (c = *s) && c != ')'; s++) g = string_catn(g, s, 1);

    tlsp->ver = string_copy_from_gstring(g);
    for (uschar * p = US tlsp->ver; *p; p++)
      if (*p == '-') { *p = '\0'; break; }      /* TLS1.0-PKIX -> TLS1.0 */

    g = string_catn(g, US":", 1);
    if (*s) s++;                /* now on _ between groups */
    while ((c = *s))
      {
      for (*++s && ++s; (c = *s) && c != ')'; s++)
        g = string_catn(g, c == '-' ? US"_" : s, 1);
      /* now on ) closing group */
      if ((c = *s) && *++s == '-') g = string_catn(g, US"__", 2);
      /* now on _ between groups */
      }
    g = string_catn(g, US":", 1);
    g = string_cat(g, string_sprintf("%d", (int) gnutls_cipher_get_key_size(cipher) * 8));
    state->ciphersuite = string_from_gstring(g);
    }
#else
  state->ciphersuite = string_sprintf("%s:%s:%d",
      gnutls_protocol_get_name(protocol),
      gnutls_cipher_suite_get_name(kx, cipher, mac),
      (int) gnutls_cipher_get_key_size(cipher) * 8);

  /* I don't see a way that spaces could occur, in the current GnuTLS
  code base, but it was a concern in the old code and perhaps older GnuTLS
  releases did return "TLS 1.0"; play it safe, just in case. */

  for (uschar * p = state->ciphersuite; *p; p++) if (isspace(*p)) *p = '-';
  tlsp->ver = string_copyn(state->ciphersuite,
                        Ustrchr(state->ciphersuite, ':') - state->ciphersuite);
#endif

/* debug_printf("peer_status: ciphersuite %s\n", state->ciphersuite); */

  tlsp->cipher = state->ciphersuite;
  tlsp->bits = gnutls_cipher_get_key_size(cipher) * 8;

  tlsp->cipher_stdname = cipher_stdname_kcm(kx, cipher, mac);
  }
store_pool = old_pool;

/* tls_peerdn */
cert_list = gnutls_certificate_get_peers(session, &cert_list_size);

if (!cert_list || cert_list_size == 0)
  {
  DEBUG(D_tls) debug_printf("TLS: no certificate from peer (%p & %d)\n",
      cert_list, cert_list_size);
  if (state->verify_requirement >= VERIFY_REQUIRED)
    return tls_error(US"certificate verification failed",
        US"no certificate received from peer", state->host, errstr);
  return OK;
  }

if ((ct = gnutls_certificate_type_get(session)) != GNUTLS_CRT_X509)
  {
  const uschar * ctn = US gnutls_certificate_type_get_name(ct);
  DEBUG(D_tls)
    debug_printf("TLS: peer cert not X.509 but instead \"%s\"\n", ctn);
  if (state->verify_requirement >= VERIFY_REQUIRED)
    return tls_error(US"certificate verification not possible, unhandled type",
        ctn, state->host, errstr);
  return OK;
  }

#define exim_gnutls_peer_err(Label) \
  do { \
    if (rc != GNUTLS_E_SUCCESS) \
      { \
      DEBUG(D_tls) debug_printf("TLS: peer cert problem: %s: %s\n", \
        (Label), gnutls_strerror(rc)); \
      if (state->verify_requirement >= VERIFY_REQUIRED) \
        return tls_error_gnu(state, (Label), rc, errstr); \
      return OK; \
      } \
    } while (0)

rc = import_cert(&cert_list[0], &crt);
exim_gnutls_peer_err(US"cert 0");

state->tlsp->peercert = state->peercert = crt;

sz = 0;
rc = gnutls_x509_crt_get_dn(crt, NULL, &sz);
if (rc != GNUTLS_E_SHORT_MEMORY_BUFFER)
  {
  exim_gnutls_peer_err(US"getting size for cert DN failed");
  return FAIL; /* should not happen */
  }
dn_buf = store_get_perm(sz, GET_TAINTED);
rc = gnutls_x509_crt_get_dn(crt, CS dn_buf, &sz);
exim_gnutls_peer_err(US"failed to extract certificate DN [gnutls_x509_crt_get_dn(cert 0)]");

state->peerdn = dn_buf;

return OK;
#undef exim_gnutls_peer_err
}




/*************************************************
*            Verify peer certificate             *
*************************************************/

/* Called from both server and client code.
*Should* be using a callback registered with
gnutls_certificate_set_verify_function() to fail the handshake if we dislike
the peer information, but that's too new for some OSes.

Arguments:
  state         exim_gnutls_state_st *
  errstr        where to put an error message

Returns:
  FALSE     if the session should be rejected
  TRUE      if the cert is okay or we just don't care
*/

static BOOL
verify_certificate(exim_gnutls_state_st * state, uschar ** errstr)
{
int rc;
uint verify;

DEBUG(D_tls) debug_printf("TLS: checking peer certificate\n");
*errstr = NULL;
rc = peer_status(state, errstr);

if (state->verify_requirement == VERIFY_NONE)
  return TRUE;

if (rc != OK || !state->peerdn)
  {
  verify = GNUTLS_CERT_INVALID;
  *errstr = US"certificate not supplied";
  }
else

  {
#ifdef SUPPORT_DANE
  if (state->verify_requirement == VERIFY_DANE && state->host)
    {
    /* Using dane_verify_session_crt() would be easy, as it does it all for us
    including talking to a DNS resolver.  But we want to do that bit ourselves
    as the testsuite intercepts and fakes its own DNS environment. */

    dane_state_t s;
    dane_query_t r;
    uint lsize;
    const gnutls_datum_t * certlist =
      gnutls_certificate_get_peers(state->session, &lsize);
    int usage = tls_out.tlsa_usage;

# ifdef GNUTLS_BROKEN_DANE_VALIDATION
    /* Split the TLSA records into two sets, TA and EE selectors.  Run the
    dane-verification separately so that we know which selector verified;
    then we know whether to do name-verification (needed for TA but not EE). */

    if (usage == ((1<<DANESSL_USAGE_DANE_TA) | (1<<DANESSL_USAGE_DANE_EE)))
      {                                         /* a mixed-usage bundle */
      int i, j, nrec;
      const char ** dd;
      int * ddl;

      for (nrec = 0; state->dane_data_len[nrec]; ) nrec++;
      nrec++;

      dd = store_get(nrec * sizeof(uschar *), GET_UNTAINTED);
      ddl = store_get(nrec * sizeof(int), GET_UNTAINTED);
      nrec--;

      if ((rc = dane_state_init(&s, 0)))
        goto tlsa_prob;

      for (usage = DANESSL_USAGE_DANE_EE;
           usage >= DANESSL_USAGE_DANE_TA; usage--)
        {                               /* take records with this usage */
        for (j = i = 0; i < nrec; i++)
          if (state->dane_data[i][0] == usage)
            {
            dd[j] = state->dane_data[i];
            ddl[j++] = state->dane_data_len[i];
            }
        if (j)
          {
          dd[j] = NULL;
          ddl[j] = 0;

          if ((rc = dane_raw_tlsa(s, &r, (char * const *)dd, ddl, 1, 0)))
            goto tlsa_prob;

          if ((rc = dane_verify_crt_raw(s, certlist, lsize,
                            gnutls_certificate_type_get(state->session),
                            r, 0,
                            usage == DANESSL_USAGE_DANE_EE
                            ? DANE_VFLAG_ONLY_CHECK_EE_USAGE : 0,
                            &verify)))
            {
            DEBUG(D_tls)
              debug_printf("TLSA record problem: %s\n", dane_strerror(rc));
            }
          else if (verify == 0) /* verification passed */
            {
            usage = 1 << usage;
            break;
            }
          }
        }

        if (rc) goto tlsa_prob;
      }
    else
# endif
      {
      if (  (rc = dane_state_init(&s, 0))
         || (rc = dane_raw_tlsa(s, &r, state->dane_data, state->dane_data_len,
                        1, 0))
         || (rc = dane_verify_crt_raw(s, certlist, lsize,
                        gnutls_certificate_type_get(state->session),
                        r, 0,
# ifdef GNUTLS_BROKEN_DANE_VALIDATION
                        usage == (1 << DANESSL_USAGE_DANE_EE)
                        ? DANE_VFLAG_ONLY_CHECK_EE_USAGE : 0,
# else
                        0,
# endif
                        &verify))
         )
        goto tlsa_prob;
      }

    if (verify != 0)            /* verification failed */
      {
      gnutls_datum_t str;
      (void) dane_verification_status_print(verify, &str, 0);
      *errstr = US str.data;    /* don't bother to free */
      goto badcert;
      }

# ifdef GNUTLS_BROKEN_DANE_VALIDATION
    /* If a TA-mode TLSA record was used for verification we must additionally
    verify the cert name (but not the CA chain).  For EE-mode, skip it. */

    if (usage & (1 << DANESSL_USAGE_DANE_EE))
# endif
      {
      state->peer_dane_verified = state->peer_cert_verified = TRUE;
      goto goodcert;
      }
# ifdef GNUTLS_BROKEN_DANE_VALIDATION
    /* Assume that the name on the A-record is the one that should be matching
    the cert.  An alternate view is that the domain part of the email address
    is also permissible. */

    if (gnutls_x509_crt_check_hostname(state->tlsp->peercert,
          CS state->host->name))
      {
      state->peer_dane_verified = state->peer_cert_verified = TRUE;
      goto goodcert;
      }
# endif
    }
#endif  /*SUPPORT_DANE*/

  rc = gnutls_certificate_verify_peers2(state->session, &verify);
  }

/* Handle the result of verification. INVALID is set if any others are. */

if (rc < 0 || verify & (GNUTLS_CERT_INVALID|GNUTLS_CERT_REVOKED))
  {
  state->peer_cert_verified = FALSE;
  if (!*errstr)
    {
#ifdef GNUTLS_CERT_VFY_STATUS_PRINT
    DEBUG(D_tls)
      {
      gnutls_datum_t txt;

      if (gnutls_certificate_verification_status_print(verify,
            gnutls_certificate_type_get(state->session), &txt, 0)
          == GNUTLS_E_SUCCESS)
        {
        debug_printf("%s\n", txt.data);
        gnutls_free(txt.data);
        }
      }
#endif
    *errstr = verify & GNUTLS_CERT_REVOKED
      ? US"certificate revoked" : US"certificate invalid";
    }

  DEBUG(D_tls)
    debug_printf("TLS certificate verification failed (%s): peerdn=\"%s\"\n",
        *errstr, state->peerdn ? state->peerdn : US"<unset>");

  if (state->verify_requirement >= VERIFY_REQUIRED)
    goto badcert;
  DEBUG(D_tls)
    debug_printf("TLS verify failure overridden (host in tls_try_verify_hosts)\n");
  }

else
  {
  /* Client side, check the server's certificate name versus the name on the
  A-record for the connection we made.  What to do for server side - what name
  to use for client?  We document that there is no such checking for server
  side. */

  if (  state->exp_tls_verify_cert_hostnames
     && !gnutls_x509_crt_check_hostname(state->tlsp->peercert,
                CS state->exp_tls_verify_cert_hostnames)
     )
    {
    DEBUG(D_tls)
      debug_printf("TLS certificate verification failed: cert name mismatch (per GnuTLS)\n");
    if (state->verify_requirement >= VERIFY_REQUIRED)
      goto badcert;
    return TRUE;
    }

  state->peer_cert_verified = TRUE;
  DEBUG(D_tls) debug_printf("TLS certificate verified: peerdn=\"%s\"\n",
      state->peerdn ? state->peerdn : US"<unset>");
  }

goodcert:
  state->tlsp->peerdn = state->peerdn;
  return TRUE;

#ifdef SUPPORT_DANE
tlsa_prob:
  *errstr = string_sprintf("TLSA record problem: %s",
    rc == DANE_E_REQUESTED_DATA_NOT_AVAILABLE ? "none usable" : dane_strerror(rc));
#endif

badcert:
  gnutls_alert_send(state->session, GNUTLS_AL_FATAL, GNUTLS_A_BAD_CERTIFICATE);
  return FALSE;
}




/* ------------------------------------------------------------------------ */
/* Callbacks */

/* Logging function which can be registered with
 *   gnutls_global_set_log_function()
 *   gnutls_global_set_log_level() 0..9
 */
#if EXIM_GNUTLS_LIBRARY_LOG_LEVEL >= 0
static void
exim_gnutls_logger_cb(int level, const char *message)
{
  size_t len = strlen(message);
  if (len < 1)
    {
    DEBUG(D_tls) debug_printf("GnuTLS<%d> empty debug message\n", level);
    return;
    }
  DEBUG(D_tls) debug_printf("GnuTLS<%d>: %s%s", level, message,
      message[len-1] == '\n' ? "" : "\n");
}
#endif


/* Called after client hello, should handle SNI work.
This will always set tls_sni (state->received_sni) if available,
and may trigger presenting different certificates,
if state->trigger_sni_changes is TRUE.

Should be registered with
  gnutls_handshake_set_post_client_hello_function()

"This callback must return 0 on success or a gnutls error code to terminate the
handshake.".

For inability to get SNI information, we return 0.
We only return non-zero if re-setup failed.
Only used for server-side TLS.
*/

static int
exim_sni_handling_cb(gnutls_session_t session)
{
char sni_name[MAX_HOST_LEN];
size_t data_len = MAX_HOST_LEN;
exim_gnutls_state_st *state = &state_server;
unsigned int sni_type;
int rc, old_pool;
uschar * dummy_errstr;

rc = gnutls_server_name_get(session, sni_name, &data_len, &sni_type, 0);
if (rc != GNUTLS_E_SUCCESS)
  {
  DEBUG(D_tls)
    if (rc == GNUTLS_E_REQUESTED_DATA_NOT_AVAILABLE)
      debug_printf("TLS: no SNI presented in handshake\n");
    else
      debug_printf("TLS failure: gnutls_server_name_get(): %s [%d]\n",
        gnutls_strerror(rc), rc);
  return 0;
  }

if (sni_type != GNUTLS_NAME_DNS)
  {
  DEBUG(D_tls) debug_printf("TLS: ignoring SNI of unhandled type %u\n", sni_type);
  return 0;
  }

/* We now have a UTF-8 string in sni_name */
old_pool = store_pool;
store_pool = POOL_PERM;
state->received_sni = string_copy_taint(US sni_name, GET_TAINTED);
store_pool = old_pool;

/* We set this one now so that variable expansions below will work */
state->tlsp->sni = state->received_sni;

DEBUG(D_tls) debug_printf("Received TLS SNI \"%s\"%s\n", sni_name,
    state->trigger_sni_changes ? "" : " (unused for certificate selection)");

if (!state->trigger_sni_changes)
  return 0;

if ((rc = tls_expand_session_files(state, &dummy_errstr)) != OK)
  {
  /* If the setup of certs/etc failed before handshake, TLS would not have
  been offered.  The best we can do now is abort. */
  DEBUG(D_tls) debug_printf("expansion for SNI-dependent session files failed\n");
  return GNUTLS_E_REQUESTED_DATA_NOT_AVAILABLE;
  }

rc = tls_set_remaining_x509(state, &dummy_errstr);
if (rc != OK) return GNUTLS_E_REQUESTED_DATA_NOT_AVAILABLE;

return 0;
}



#ifndef DISABLE_EVENT
/*
We use this callback to get observability and detail-level control
for an exim TLS connection (either direction), raising a tls:cert event
for each cert in the chain presented by the peer.  Any event
can deny verification.

Return 0 for the handshake to continue or non-zero to terminate.
*/

static int
verify_cb(gnutls_session_t session)
{
const gnutls_datum_t * cert_list;
unsigned int cert_list_size = 0;
gnutls_x509_crt_t crt;
int rc;
uschar * yield;
exim_gnutls_state_st * state = gnutls_session_get_ptr(session);

if ((cert_list = gnutls_certificate_get_peers(session, &cert_list_size)))
  while (cert_list_size--)
    {
    if ((rc = import_cert(&cert_list[cert_list_size], &crt)) != GNUTLS_E_SUCCESS)
      {
      DEBUG(D_tls) debug_printf("TLS: peer cert problem: depth %d: %s\n",
        cert_list_size, gnutls_strerror(rc));
      break;
      }

    state->tlsp->peercert = crt;
    if ((yield = event_raise(state->event_action,
                US"tls:cert", string_sprintf("%d", cert_list_size), &errno)))
      {
      log_write(0, LOG_MAIN,
                "SSL verify denied by event-action: depth=%d: %s",
                cert_list_size, yield);
      return 1;                     /* reject */
      }
    state->tlsp->peercert = NULL;
    }

return 0;
}

#endif


static gstring *
ddump(gnutls_datum_t * d)
{
gstring * g = string_get((d->size+1) * 2);
uschar * s = d->data;
for (unsigned i = d->size; i > 0; i--, s++)
  {
  g = string_catn(g, US "0123456789abcdef" + (*s >> 4), 1);
  g = string_catn(g, US "0123456789abcdef" + (*s & 0xf), 1);
  }
return g;
}

static void
post_handshake_debug(exim_gnutls_state_st * state)
{
#ifdef SUPPORT_GNUTLS_SESS_DESC
debug_printf("%s\n", gnutls_session_get_desc(state->session));
#endif

#ifdef SUPPORT_GNUTLS_KEYLOG
# ifdef EXIM_HAVE_TLS1_3
if (gnutls_protocol_get_version(state->session) < GNUTLS_TLS1_3)
# else
if (TRUE)
# endif
  {
  gnutls_datum_t c, s;
  gstring * gc, * gs;
  /* For TLS1.2 we only want the client random and the master secret */
  gnutls_session_get_random(state->session, &c, &s);
  gnutls_session_get_master_secret(state->session, &s);
  gc = ddump(&c);
  gs = ddump(&s);
  debug_printf("CLIENT_RANDOM %.*s %.*s\n", (int)gc->ptr, gc->s, (int)gs->ptr, gs->s);
  }
else
  debug_printf("To get keying info for TLS1.3 is hard:\n"
    " Set environment variable SSLKEYLOGFILE to a filename relative to the spool directory,\n"
    " and make sure it is writable by the Exim runtime user.\n"
    " Add SSLKEYLOGFILE to keep_environment in the exim config.\n"
    " Start Exim as root.\n"
    " If using sudo, add SSLKEYLOGFILE to env_keep in /etc/sudoers\n"
    " (works for TLS1.2 also, and saves cut-paste into file).\n"
    " Trying to use add_environment for this will not work\n");
#endif
}


#ifdef EXIM_HAVE_TLS_RESUME
static int
tls_server_ticket_cb(gnutls_session_t sess, u_int htype, unsigned when,
  unsigned incoming, const gnutls_datum_t * msg)
{
DEBUG(D_tls) debug_printf("newticket cb (on server)\n");
tls_in.resumption |= RESUME_CLIENT_REQUESTED;
return 0;
}

static void
tls_server_resume_prehandshake(exim_gnutls_state_st * state)
{
/* Should the server offer session resumption? */
tls_in.resumption = RESUME_SUPPORTED;
if (verify_check_host(&tls_resumption_hosts) == OK)
  {
  int rc;
  /* GnuTLS appears to not do ticket overlap, but does emit a fresh ticket when
  an offered resumption is unacceptable.  We lose one resumption per ticket
  lifetime, and sessions cannot be indefinitely re-used.  There seems to be no
  way (3.6.7) of changing the default number of 2 TLS1.3 tickets issued, but at
  least they go out in a single packet. */

  if (!(rc = gnutls_session_ticket_enable_server(state->session,
              &server_sessticket_key)))
    tls_in.resumption |= RESUME_SERVER_TICKET;
  else
    DEBUG(D_tls)
      debug_printf("enabling session tickets: %s\n", US gnutls_strerror(rc));

  /* Try to tell if we see a ticket request */
  gnutls_handshake_set_hook_function(state->session,
    GNUTLS_HANDSHAKE_ANY, GNUTLS_HOOK_POST, tls_server_hook_cb);
  }
}

static void
tls_server_resume_posthandshake(exim_gnutls_state_st * state)
{
if (gnutls_session_resumption_requested(state->session))
  {
  /* This tells us the client sent a full (?) ticket.  We use a
  callback on session-ticket request, elsewhere, to tell
  if a client asked for a ticket.
  XXX As of GnuTLS 3.0.1 it seems to be returning true even for
  a pure ticket-req (a zero-length Session Ticket extension
  in the Client Hello, for 1.2) which mucks up our logic. */

  tls_in.resumption |= RESUME_CLIENT_SUGGESTED;
  DEBUG(D_tls) debug_printf("client requested resumption\n");
  }
if (gnutls_session_is_resumed(state->session))
  {
  tls_in.resumption |= RESUME_USED;
  DEBUG(D_tls) debug_printf("Session resumed\n");
  }
}
#endif  /* EXIM_HAVE_TLS_RESUME */


#ifdef EXIM_HAVE_ALPN
/* Expand and convert an Exim list to a gnutls_datum list.  False return for fail.
NULL plist return for silent no-ALPN.
*/

static BOOL
tls_alpn_plist(uschar ** tls_alpn, const gnutls_datum_t ** plist, unsigned * plen,
  uschar ** errstr)
{
uschar * exp_alpn;

if (!expand_check(*tls_alpn, US"tls_alpn", &exp_alpn, errstr))
  return FALSE;

if (!exp_alpn)
  {
  DEBUG(D_tls) debug_printf("Setting TLS ALPN forced to fail, not sending\n");
  *plist = NULL;
  }
else
  {
  const uschar * list = exp_alpn;
  int sep = 0;
  unsigned cnt = 0;
  gnutls_datum_t * p;
  uschar * s;

  while (string_nextinlist(&list, &sep, NULL, 0)) cnt++;

  p = store_get(sizeof(gnutls_datum_t) * cnt, exp_alpn);
  list = exp_alpn;
  for (int i = 0; s = string_nextinlist(&list, &sep, NULL, 0); i++)
    { p[i].data = s; p[i].size = Ustrlen(s); }
  *plist = (*plen = cnt) ? p : NULL;
  }
return TRUE;
}

static void
tls_server_set_acceptable_alpns(exim_gnutls_state_st * state, uschar ** errstr)
{
uschar * local_alpn = string_copy(tls_alpn);
int rc;
const gnutls_datum_t * plist;
unsigned plen;

if (tls_alpn_plist(&local_alpn, &plist, &plen, errstr) && plist)
  {
  /* This seems to be only mandatory if the client sends an ALPN extension;
  not trying ALPN is ok. Need to decide how to support server-side must-alpn. */

  server_seen_alpn = 0;
  if (!(rc = gnutls_alpn_set_protocols(state->session, plist, plen,
                                        GNUTLS_ALPN_MANDATORY)))
    gnutls_handshake_set_hook_function(state->session,
      GNUTLS_HANDSHAKE_ANY, GNUTLS_HOOK_POST, tls_server_hook_cb);
  else
    DEBUG(D_tls)
      debug_printf("setting alpn protocols: %s\n", US gnutls_strerror(rc));
  }
}
#endif  /* EXIM_HAVE_ALPN */

/* ------------------------------------------------------------------------ */
/* Exported functions */




/*************************************************
*       Start a TLS session in a server          *
*************************************************/

/* This is called when Exim is running as a server, after having received
the STARTTLS command. It must respond to that command, and then negotiate
a TLS session.

Arguments:
  errstr           pointer to error string

Returns:           OK on success
                   DEFER for errors before the start of the negotiation
                   FAIL for errors during the negotiation; the server can't
                     continue running.
*/

int
tls_server_start(uschar ** errstr)
{
int rc;
exim_gnutls_state_st * state = NULL;

/* Check for previous activation */
if (tls_in.active.sock >= 0)
  {
  tls_error(US"STARTTLS received after TLS started", US "", NULL, errstr);
  smtp_printf("554 Already in TLS\r\n", SP_NO_MORE);
  return FAIL;
  }

/* Initialize the library. If it fails, it will already have logged the error
and sent an SMTP response. */

DEBUG(D_tls) debug_printf("initialising GnuTLS as a server\n");

  {
#ifdef MEASURE_TIMING
  struct timeval t0;
  gettimeofday(&t0, NULL);
#endif

  if ((rc = tls_init(NULL, NULL,
      tls_require_ciphers, &state, &tls_in, errstr)) != OK) return rc;

#ifdef MEASURE_TIMING
  report_time_since(&t0, US"server tls_init (delta)");
#endif
  }

#ifdef EXIM_HAVE_ALPN
tls_server_set_acceptable_alpns(state, errstr);
#endif

#ifdef EXIM_HAVE_TLS_RESUME
tls_server_resume_prehandshake(state);
#endif

/* If this is a host for which certificate verification is mandatory or
optional, set up appropriately. */

if (verify_check_host(&tls_verify_hosts) == OK)
  {
  DEBUG(D_tls)
    debug_printf("TLS: a client certificate will be required\n");
  state->verify_requirement = VERIFY_REQUIRED;
  gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_REQUIRE);
  }
else if (verify_check_host(&tls_try_verify_hosts) == OK)
  {
  DEBUG(D_tls)
    debug_printf("TLS: a client certificate will be requested but not required\n");
  state->verify_requirement = VERIFY_OPTIONAL;
  gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_REQUEST);
  }
else
  {
  DEBUG(D_tls)
    debug_printf("TLS: a client certificate will not be requested\n");
  state->verify_requirement = VERIFY_NONE;
  gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_IGNORE);
  }

#ifndef DISABLE_EVENT
if (event_action)
  {
  state->event_action = event_action;
  gnutls_session_set_ptr(state->session, state);
  gnutls_certificate_set_verify_function(state->lib_state.x509_cred, verify_cb);
  }
#endif

/* Register SNI handling; always, even if not in tls_certificate, so that the
expansion variable $tls_sni is always available. */

gnutls_handshake_set_post_client_hello_function(state->session,
    exim_sni_handling_cb);

/* Set context and tell client to go ahead, except in the case of TLS startup
on connection, where outputting anything now upsets the clients and tends to
make them disconnect. We need to have an explicit fflush() here, to force out
the response. Other smtp_printf() calls do not need it, because in non-TLS
mode, the fflush() happens when smtp_getc() is called. */

if (!state->tlsp->on_connect)
  {
  smtp_printf("220 TLS go ahead\r\n", SP_NO_MORE);
  fflush(smtp_out);
  }

/* Now negotiate the TLS session. We put our own timer on it, since it seems
that the GnuTLS library doesn't.
From 3.1.0 there is gnutls_handshake_set_timeout() - but it requires you
to set (and clear down afterwards) up a pull-timeout callback function that does
a select, so we're no better off unless avoiding signals becomes an issue. */

gnutls_transport_set_ptr2(state->session,
    (gnutls_transport_ptr_t)(long) fileno(smtp_in),
    (gnutls_transport_ptr_t)(long) fileno(smtp_out));
state->fd_in = fileno(smtp_in);
state->fd_out = fileno(smtp_out);

sigalrm_seen = FALSE;
if (smtp_receive_timeout > 0) ALARM(smtp_receive_timeout);
do
  rc = gnutls_handshake(state->session);
while (rc == GNUTLS_E_AGAIN ||  rc == GNUTLS_E_INTERRUPTED && !sigalrm_seen);
ALARM_CLR(0);

if (rc != GNUTLS_E_SUCCESS)
  {
  DEBUG(D_tls) debug_printf(" error %d from gnutls_handshake: %s\n",
    rc, gnutls_strerror(rc));

  /* It seems that, except in the case of a timeout, we have to close the
  connection right here; otherwise if the other end is running OpenSSL it hangs
  until the server times out. */

  if (sigalrm_seen)
    {
    tls_error(US"gnutls_handshake", US"timed out", NULL, errstr);
#ifndef DISABLE_EVENT
    (void) event_raise(event_action, US"tls:fail:connect", *errstr, NULL);
#endif
    gnutls_db_remove_session(state->session);
    }
  else
    {
    tls_error_gnu(state, US"gnutls_handshake", rc, errstr);
#ifndef DISABLE_EVENT
    (void) event_raise(event_action, US"tls:fail:connect", *errstr, NULL);
#endif
    (void) gnutls_alert_send_appropriate(state->session, rc);
    gnutls_deinit(state->session);
    millisleep(500);
    shutdown(state->fd_out, SHUT_WR);
    for (int i = 1024; fgetc(smtp_in) != EOF && i > 0; ) i--;   /* drain skt */
    (void)fclose(smtp_out);
    (void)fclose(smtp_in);
    smtp_out = smtp_in = NULL;
    }

  return FAIL;
  }

#ifdef GNUTLS_SFLAGS_EXT_MASTER_SECRET
if (gnutls_session_get_flags(state->session) & GNUTLS_SFLAGS_EXT_MASTER_SECRET)
  tls_in.ext_master_secret = TRUE;
#endif

#ifdef EXIM_HAVE_TLS_RESUME
tls_server_resume_posthandshake(state);
#endif

DEBUG(D_tls) post_handshake_debug(state);

#ifdef EXIM_HAVE_ALPN
if (server_seen_alpn > 0)
  {
  DEBUG(D_tls)
    {           /* The client offered ALPN.  See what was negotiated. */
    gnutls_datum_t p = {.size = 0};
    int rc = gnutls_alpn_get_selected_protocol(state->session, &p);
    if (!rc)
        debug_printf("ALPN negotiated: %.*s\n", (int)p.size, p.data);
    else
        debug_printf("getting alpn protocol: %s\n", US gnutls_strerror(rc));

    }
  }
else if (server_seen_alpn == 0)
  if (verify_check_host(&hosts_require_alpn) == OK)
    {
    gnutls_alert_send(state->session, GNUTLS_AL_FATAL, GNUTLS_A_NO_APPLICATION_PROTOCOL);
    tls_error(US"handshake", US"ALPN required but not negotiated", NULL, errstr);
    return FAIL;
    }
  else
    DEBUG(D_tls) debug_printf("TLS: no ALPN presented in handshake\n");
else
  DEBUG(D_tls) debug_printf("TLS: was not watching for ALPN\n");
#endif

/* Verify after the fact */

if (!verify_certificate(state, errstr))
  {
  if (state->verify_requirement != VERIFY_OPTIONAL)
    {
    (void) tls_error(US"certificate verification failed", *errstr, NULL, errstr);
    return FAIL;
    }
  DEBUG(D_tls)
    debug_printf("TLS: continuing on only because verification was optional, after: %s\n",
        *errstr);
  }

/* Sets various Exim expansion variables; always safe within server */

extract_exim_vars_from_tls_state(state);

/* TLS has been set up. Adjust the input functions to read via TLS,
and initialize appropriately. */

state->xfer_buffer = store_malloc(ssl_xfer_buffer_size);

receive_getc = tls_getc;
receive_getbuf = tls_getbuf;
receive_get_cache = tls_get_cache;
receive_hasc = tls_hasc;
receive_ungetc = tls_ungetc;
receive_feof = tls_feof;
receive_ferror = tls_ferror;

return OK;
}




static void
tls_client_setup_hostname_checks(host_item * host, exim_gnutls_state_st * state,
  smtp_transport_options_block * ob)
{
if (verify_check_given_host(CUSS &ob->tls_verify_cert_hostnames, host) == OK)
  {
  state->exp_tls_verify_cert_hostnames =
#ifdef SUPPORT_I18N
    string_domain_utf8_to_alabel(host->certname, NULL);
#else
    host->certname;
#endif
  DEBUG(D_tls)
    debug_printf("TLS: server cert verification includes hostname: \"%s\"\n",
                    state->exp_tls_verify_cert_hostnames);
  }
}




#ifdef SUPPORT_DANE
/* Given our list of RRs from the TLSA lookup, build a lookup block in
GnuTLS-DANE's preferred format.  Hang it on the state str for later
use in DANE verification.

We point at the dnsa data not copy it, so it must remain valid until
after verification is done.*/

static BOOL
dane_tlsa_load(exim_gnutls_state_st * state, dns_answer * dnsa)
{
dns_scan dnss;
int i;
const char **   dane_data;
int *           dane_data_len;

i = 1;
for (dns_record * rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS); rr;
     rr = dns_next_rr(dnsa, &dnss, RESET_NEXT)
    ) if (rr->type == T_TLSA) i++;

dane_data = store_get(i * sizeof(uschar *), GET_UNTAINTED);
dane_data_len = store_get(i * sizeof(int), GET_UNTAINTED);

i = 0;
for (dns_record * rr = dns_next_rr(dnsa, &dnss, RESET_ANSWERS); rr;
     rr = dns_next_rr(dnsa, &dnss, RESET_NEXT)
    ) if (rr->type == T_TLSA && rr->size > 3)
  {
  const uschar * p = rr->data;
/*XXX need somehow to mark rr and its data as tainted.  Doues this mean copying it? */
  uint8_t usage = p[0], sel = p[1], type = p[2];

  DEBUG(D_tls)
    debug_printf("TLSA: %d %d %d size %d\n", usage, sel, type, rr->size);

  if (  (usage != DANESSL_USAGE_DANE_TA && usage != DANESSL_USAGE_DANE_EE)
     || (sel != 0 && sel != 1)
     )
    continue;
  switch(type)
    {
    case 0:     /* Full: cannot check at present */
                break;
    case 1:     if (rr->size != 3 + 256/8) continue;    /* sha2-256 */
                break;
    case 2:     if (rr->size != 3 + 512/8) continue;    /* sha2-512 */
                break;
    default:    continue;
    }

  tls_out.tlsa_usage |= 1<<usage;
  dane_data[i] = CS p;
  dane_data_len[i++] = rr->size;
  }

if (!i) return FALSE;

dane_data[i] = NULL;
dane_data_len[i] = 0;

state->dane_data = (char * const *)dane_data;
state->dane_data_len = dane_data_len;
return TRUE;
}
#endif



#ifdef EXIM_HAVE_TLS_RESUME
/* On the client, get any stashed session for the given IP from hints db
and apply it to the ssl-connection for attempted resumption.  Although
there is a gnutls_session_ticket_enable_client() interface it is
documented as unnecessary (as of 3.6.7) as "session tickets are emabled
by deafult".  There seems to be no way to disable them, so even hosts not
enabled by the transport option will be sent a ticket request.  We will
however avoid storing and retrieving session information. */

static void
tls_retrieve_session(tls_support * tlsp, gnutls_session_t session,
  smtp_connect_args * conn_args, smtp_transport_options_block * ob)
{
tlsp->resumption = RESUME_SUPPORTED;

if (!conn_args->have_lbserver)
  { DEBUG(D_tls) debug_printf(
      "resumption not supported: no LB detection done (continued-conn?)\n"); }
else if (verify_check_given_host(CUSS &ob->tls_resumption_hosts, conn_args->host) == OK)
  {
  dbdata_tls_session * dt;
  int len, rc;
  open_db dbblock, * dbm_file;

  tlsp->host_resumable = TRUE;
  tls_client_resmption_key(tlsp, conn_args, ob);

  tlsp->resumption |= RESUME_CLIENT_REQUESTED;
  if ((dbm_file = dbfn_open(US"tls", O_RDONLY, &dbblock, FALSE, FALSE)))
    {
    /* We'd like to filter the retrieved session for ticket advisory expiry,
    but 3.6.1 seems to give no access to that */

    if ((dt = dbfn_read_with_length(dbm_file, tlsp->resume_index, &len)))
      if (!(rc = gnutls_session_set_data(session,
                    CUS dt->session, (size_t)len - sizeof(dbdata_tls_session))))
        {
        DEBUG(D_tls) debug_printf("good session\n");
        tlsp->resumption |= RESUME_CLIENT_SUGGESTED;
        }
      else DEBUG(D_tls) debug_printf("setting session resumption data: %s\n",
            US gnutls_strerror(rc));
    dbfn_close(dbm_file);
    }
  }
else DEBUG(D_tls) debug_printf("no resumption for this host\n");
}


static void
tls_save_session(tls_support * tlsp, gnutls_session_t session, const host_item * host)
{
/* TLS 1.2 - we get both the callback and the direct posthandshake call,
but this flag is not set until the second.  TLS 1.3 it's the other way about.
Keep both calls as the session data cannot be extracted before handshake
completes. */

if (gnutls_session_get_flags(session) & GNUTLS_SFLAGS_SESSION_TICKET)
  {
  gnutls_datum_t tkt;
  int rc;

  DEBUG(D_tls) debug_printf("server offered session ticket\n");
  tlsp->ticket_received = TRUE;
  tlsp->resumption |= RESUME_SERVER_TICKET;

  if (tlsp->host_resumable)
    if (!(rc = gnutls_session_get_data2(session, &tkt)))
      {
      open_db dbblock, * dbm_file;
      int dlen = sizeof(dbdata_tls_session) + tkt.size;
      dbdata_tls_session * dt = store_get(dlen, GET_TAINTED);

      DEBUG(D_tls) debug_printf(" session data size %u\n", (unsigned)tkt.size);
      memcpy(dt->session, tkt.data, tkt.size);
      gnutls_free(tkt.data);

      if ((dbm_file = dbfn_open(US"tls", O_RDWR, &dbblock, FALSE, FALSE)))
        {
        /* key for the db is the IP */
        dbfn_write(dbm_file, tlsp->resume_index, dt, dlen);
        dbfn_close(dbm_file);

        DEBUG(D_tls)
          debug_printf(" wrote session db (len %u)\n", (unsigned)dlen);
        }
      }
    else
      { DEBUG(D_tls)
      debug_printf(" extract session data: %s\n", US gnutls_strerror(rc));
      }
  else DEBUG(D_tls)
      debug_printf(" host not resmable; not saving ticket\n");
  }
}


/* With a TLS1.3 session, the ticket(s) are not seen until
the first data read is attempted.  And there's often two of them.
Pick them up with this callback.  We are also called for 1.2
but we do nothing.
*/
static int
tls_client_ticket_cb(gnutls_session_t sess, u_int htype, unsigned when,
  unsigned incoming, const gnutls_datum_t * msg)
{
exim_gnutls_state_st * state = gnutls_session_get_ptr(sess);
tls_support * tlsp = state->tlsp;

DEBUG(D_tls) debug_printf("newticket cb (on client)\n");

if (!tlsp->ticket_received)
  tls_save_session(tlsp, sess, state->host);
return 0;
}


static void
tls_client_resume_prehandshake(exim_gnutls_state_st * state,
  tls_support * tlsp, smtp_connect_args * conn_args,
  smtp_transport_options_block * ob)
{
gnutls_session_set_ptr(state->session, state);
gnutls_handshake_set_hook_function(state->session,
  GNUTLS_HANDSHAKE_NEW_SESSION_TICKET, GNUTLS_HOOK_POST, tls_client_ticket_cb);

tls_retrieve_session(tlsp, state->session, conn_args, ob);
}

static void
tls_client_resume_posthandshake(exim_gnutls_state_st * state,
  tls_support * tlsp, host_item * host)
{
if (gnutls_session_is_resumed(state->session))
  {
  DEBUG(D_tls) debug_printf("Session resumed\n");
  tlsp->resumption |= RESUME_USED;
  }

tls_save_session(tlsp, state->session, host);
}
#endif  /* !DISABLE_TLS_RESUME */


/*************************************************
*    Start a TLS session in a client             *
*************************************************/

/* Called from the smtp transport after STARTTLS has been accepted.

Arguments:
  cctx          connection context
  conn_args     connection details
  cookie        datum for randomness (not used)
  tlsp          record details of channel configuration here; must be non-NULL
  errstr        error string pointer

Returns:        TRUE for success with TLS session context set in smtp context,
                FALSE on error
*/

BOOL
tls_client_start(client_conn_ctx * cctx, smtp_connect_args * conn_args,
  void * cookie ARG_UNUSED,
  tls_support * tlsp, uschar ** errstr)
{
host_item * host = conn_args->host;          /* for msgs and option-tests */
transport_instance * tb = conn_args->tblock; /* always smtp or NULL */
smtp_transport_options_block * ob = tb
  ? (smtp_transport_options_block *)tb->options_block
  : &smtp_transport_option_defaults;
int rc;
exim_gnutls_state_st * state = NULL;
uschar * cipher_list = NULL;

#ifndef DISABLE_OCSP
BOOL require_ocsp =
  verify_check_given_host(CUSS &ob->hosts_require_ocsp, host) == OK;
BOOL request_ocsp = require_ocsp ? TRUE
  : verify_check_given_host(CUSS &ob->hosts_request_ocsp, host) == OK;
#endif

DEBUG(D_tls) debug_printf("initialising GnuTLS as a client on fd %d\n", cctx->sock);

#ifdef SUPPORT_DANE
/* If dane is flagged, have either request or require dane for this host, and
a TLSA record found.  Therefore, dane verify required.  Which implies cert must
be requested and supplied, dane verify must pass, and cert verify irrelevant
(incl.  hostnames), and (caller handled) require_tls and sni=$domain */

if (conn_args->dane && ob->dane_require_tls_ciphers)
  {
  /* not using Expand_check_tlsvar because not yet in state */
  if (!expand_check(ob->dane_require_tls_ciphers, US"dane_require_tls_ciphers",
      &cipher_list, errstr))
    return FALSE;
  cipher_list = cipher_list && *cipher_list
    ? ob->dane_require_tls_ciphers : ob->tls_require_ciphers;
  }
#endif

if (!cipher_list)
  cipher_list = ob->tls_require_ciphers;

  {
#ifdef MEASURE_TIMING
  struct timeval t0;
  gettimeofday(&t0, NULL);
#endif

  if (tls_init(host, ob, cipher_list, &state, tlsp, errstr) != OK)
    return FALSE;

#ifdef MEASURE_TIMING
  report_time_since(&t0, US"client tls_init (delta)");
#endif
  }

if (ob->tls_alpn)
#ifdef EXIM_HAVE_ALPN
  {
  const gnutls_datum_t * plist;
  unsigned plen;

  if (!tls_alpn_plist(&ob->tls_alpn, &plist, &plen, errstr))
    return FALSE;
  if (plist)
    if (gnutls_alpn_set_protocols(state->session, plist, plen, 0) != 0)
      {
      tls_error(US"alpn init", NULL, state->host, errstr);
      return FALSE;
      }
    else
      DEBUG(D_tls) debug_printf("Setting TLS ALPN '%s'\n", ob->tls_alpn);
  }
#else
  log_write(0, LOG_MAIN, "ALPN unusable with this GnuTLS library version; ignoring \"%s\"\n",
          ob->tls_alpn);
#endif

  {
  int dh_min_bits = ob->tls_dh_min_bits;
  if (dh_min_bits < EXIM_CLIENT_DH_MIN_MIN_BITS)
    {
    DEBUG(D_tls)
      debug_printf("WARNING: tls_dh_min_bits far too low,"
                    " clamping %d up to %d\n",
          dh_min_bits, EXIM_CLIENT_DH_MIN_MIN_BITS);
    dh_min_bits = EXIM_CLIENT_DH_MIN_MIN_BITS;
    }

  DEBUG(D_tls) debug_printf("Setting D-H prime minimum"
                    " acceptable bits to %d\n",
      dh_min_bits);
  gnutls_dh_set_prime_bits(state->session, dh_min_bits);
  }

/* Stick to the old behaviour for compatibility if tls_verify_certificates is
set but both tls_verify_hosts and tls_try_verify_hosts are unset. Check only
the specified host patterns if one of them is defined */

#ifdef SUPPORT_DANE
if (conn_args->dane && dane_tlsa_load(state, &conn_args->tlsa_dnsa))
  {
  DEBUG(D_tls)
    debug_printf("TLS: server certificate DANE required\n");
  state->verify_requirement = VERIFY_DANE;
  gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_REQUIRE);
  }
else
#endif
    if (  (  state->exp_tls_verify_certificates
          && !ob->tls_verify_hosts
          && (!ob->tls_try_verify_hosts || !*ob->tls_try_verify_hosts)
          )
        || verify_check_given_host(CUSS &ob->tls_verify_hosts, host) == OK
       )
  {
  tls_client_setup_hostname_checks(host, state, ob);
  DEBUG(D_tls)
    debug_printf("TLS: server certificate verification required\n");
  state->verify_requirement = VERIFY_REQUIRED;
  gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_REQUIRE);
  }
else if (verify_check_given_host(CUSS &ob->tls_try_verify_hosts, host) == OK)
  {
  tls_client_setup_hostname_checks(host, state, ob);
  DEBUG(D_tls)
    debug_printf("TLS: server certificate verification optional\n");
  state->verify_requirement = VERIFY_OPTIONAL;
  gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_REQUEST);
  }
else
  {
  DEBUG(D_tls)
    debug_printf("TLS: server certificate verification not required\n");
  state->verify_requirement = VERIFY_NONE;
  gnutls_certificate_server_set_request(state->session, GNUTLS_CERT_IGNORE);
  }

#ifndef DISABLE_OCSP
                        /* supported since GnuTLS 3.1.3 */
if (request_ocsp)
  {
  DEBUG(D_tls) debug_printf("TLS: will request OCSP stapling\n");
  if ((rc = gnutls_ocsp_status_request_enable_client(state->session,
                    NULL, 0, NULL)) != OK)
    {
    tls_error_gnu(state, US"cert-status-req", rc, errstr);
    return FALSE;
    }
  tlsp->ocsp = OCSP_NOT_RESP;
  }
#endif

#ifdef EXIM_HAVE_TLS_RESUME
tls_client_resume_prehandshake(state, tlsp, conn_args, ob);
#endif

#ifndef DISABLE_EVENT
if (tb && tb->event_action)
  {
  state->event_action = tb->event_action;
  gnutls_session_set_ptr(state->session, state);
  gnutls_certificate_set_verify_function(state->lib_state.x509_cred, verify_cb);
  }
#endif

gnutls_transport_set_ptr(state->session, (gnutls_transport_ptr_t)(long) cctx->sock);
state->fd_in = cctx->sock;
state->fd_out = cctx->sock;

DEBUG(D_tls) debug_printf("about to gnutls_handshake\n");
/* There doesn't seem to be a built-in timeout on connection. */

sigalrm_seen = FALSE;
ALARM(ob->command_timeout);
do
  rc = gnutls_handshake(state->session);
while (rc == GNUTLS_E_AGAIN || rc == GNUTLS_E_INTERRUPTED && !sigalrm_seen);
ALARM_CLR(0);

if (rc != GNUTLS_E_SUCCESS)
  {
  if (sigalrm_seen)
    {
    gnutls_alert_send(state->session, GNUTLS_AL_FATAL, GNUTLS_A_USER_CANCELED);
    tls_error(US"gnutls_handshake", US"timed out", state->host, errstr);
    }
  else
    tls_error_gnu(state, US"gnutls_handshake", rc, errstr);
  return FALSE;
  }

DEBUG(D_tls) post_handshake_debug(state);

/* Verify late */

if (!verify_certificate(state, errstr))
  {
  tls_error(US"certificate verification failed", *errstr, state->host, errstr);
  return FALSE;
  }

#ifdef GNUTLS_SFLAGS_EXT_MASTER_SECRET
if (gnutls_session_get_flags(state->session) & GNUTLS_SFLAGS_EXT_MASTER_SECRET)
  tlsp->ext_master_secret = TRUE;
#endif

#ifndef DISABLE_OCSP
if (request_ocsp)
  {
  DEBUG(D_tls)
    {
    gnutls_datum_t stapling;
    gnutls_ocsp_resp_t resp;
    gnutls_datum_t printed;
    unsigned idx = 0;

    for (;
# ifdef GNUTLS_OCSP_STATUS_REQUEST_GET2
         (rc = gnutls_ocsp_status_request_get2(state->session, idx, &stapling)) == 0;
#else
         (rc = gnutls_ocsp_status_request_get(state->session, &stapling)) == 0;
#endif
         idx++)
      if (  (rc= gnutls_ocsp_resp_init(&resp)) == 0
         && (rc= gnutls_ocsp_resp_import(resp, &stapling)) == 0
         && (rc= gnutls_ocsp_resp_print(resp, GNUTLS_OCSP_PRINT_COMPACT, &printed)) == 0
         )
        {
        debug_printf("%.4096s", printed.data);
        gnutls_free(printed.data);
        }
      else
        (void) tls_error_gnu(state, US"ocsp decode", rc, errstr);
    if (idx == 0 && rc)
      (void) tls_error_gnu(state, US"ocsp decode", rc, errstr);
    }

  if (gnutls_ocsp_status_request_is_checked(state->session, 0) == 0)
    {
    tlsp->ocsp = OCSP_FAILED;
    tls_error(US"certificate status check failed", NULL, state->host, errstr);
    if (require_ocsp)
      return FALSE;
    }
  else
    {
    DEBUG(D_tls) debug_printf("Passed OCSP checking\n");
    tlsp->ocsp = OCSP_VFIED;
    }
  }
#endif

#ifdef EXIM_HAVE_TLS_RESUME
tls_client_resume_posthandshake(state, tlsp, host);
#endif

#ifdef EXIM_HAVE_ALPN
if (ob->tls_alpn)       /* We requested. See what was negotiated. */
  {
  gnutls_datum_t p = {.size = 0};

  if (gnutls_alpn_get_selected_protocol(state->session, &p) == 0)
    { DEBUG(D_tls) debug_printf("ALPN negotiated: '%.*s'\n", (int)p.size, p.data); }
  else if (verify_check_given_host(CUSS &ob->hosts_require_alpn, host) == OK)
    {
    gnutls_alert_send(state->session, GNUTLS_AL_FATAL, GNUTLS_A_NO_APPLICATION_PROTOCOL);
    tls_error(US"handshake", US"ALPN required but not negotiated", state->host, errstr);
    return FALSE;
    }
  else
    DEBUG(D_tls) debug_printf("No ALPN negotiated");
  }
#endif

/* Sets various Exim expansion variables; may need to adjust for ACL callouts */

extract_exim_vars_from_tls_state(state);

cctx->tls_ctx = state;
return TRUE;
}




/*
Arguments:
  ct_ctx        client TLS context pointer, or NULL for the one global server context
*/

void
tls_shutdown_wr(void * ct_ctx)
{
exim_gnutls_state_st * state = ct_ctx ? ct_ctx : &state_server;
tls_support * tlsp = state->tlsp;

if (!tlsp || tlsp->active.sock < 0) return;  /* TLS was not active */

tls_write(ct_ctx, NULL, 0, FALSE);      /* flush write buffer */

HDEBUG(D_transport|D_tls|D_acl|D_v) debug_printf_indent("  SMTP(TLS shutdown)>>\n");
gnutls_bye(state->session, GNUTLS_SHUT_WR);
}

/*************************************************
*         Close down a TLS session               *
*************************************************/

/* This is also called from within a delivery subprocess forked from the
daemon, to shut down the TLS library, without actually doing a shutdown (which
would tamper with the TLS session in the parent process).

Arguments:
  ct_ctx        client context pointer, or NULL for the one global server context
  do_shutdown   0 no data-flush or TLS close-alert
                1 if TLS close-alert is to be sent,
                2 if also response to be waited for (2s timeout)

Returns:     nothing
*/

void
tls_close(void * ct_ctx, int do_shutdown)
{
exim_gnutls_state_st * state = ct_ctx ? ct_ctx : &state_server;
tls_support * tlsp = state->tlsp;

if (!tlsp || tlsp->active.sock < 0) return;  /* TLS was not active */

if (do_shutdown)
  {
  DEBUG(D_tls) debug_printf("tls_close(): shutting down TLS%s\n",
    do_shutdown > TLS_SHUTDOWN_NOWAIT ? " (with response-wait)" : "");

  tls_write(ct_ctx, NULL, 0, FALSE);    /* flush write buffer */

#ifdef EXIM_TCP_CORK
  if (do_shutdown == TLS_SHUTDOWN_WAIT)
    (void) setsockopt(tlsp->active.sock, IPPROTO_TCP, EXIM_TCP_CORK, US &off, sizeof(off));
#endif

  /* The library seems to have no way to only wait for a peer's
  shutdown, so handle the same as TLS_SHUTDOWN_WAIT */

  ALARM(2);
  gnutls_bye(state->session,
      do_shutdown > TLS_SHUTDOWN_NOWAIT ? GNUTLS_SHUT_RDWR : GNUTLS_SHUT_WR);
  ALARM_CLR(0);
  }

if (!ct_ctx)    /* server */
  {
  receive_getc =        smtp_getc;
  receive_getbuf =      smtp_getbuf;
  receive_get_cache =   smtp_get_cache;
  receive_hasc =        smtp_hasc;
  receive_ungetc =      smtp_ungetc;
  receive_feof =        smtp_feof;
  receive_ferror =      smtp_ferror;
  }

gnutls_deinit(state->session);
tlsp->active.sock = -1;
tlsp->active.tls_ctx = NULL;
/* Leave bits, peercert, cipher, peerdn, certificate_verified set, for logging */
tlsp->channelbinding = NULL;


if (state->xfer_buffer) store_free(state->xfer_buffer);
}




static BOOL
tls_refill(unsigned lim)
{
exim_gnutls_state_st * state = &state_server;
ssize_t inbytes;

DEBUG(D_tls) debug_printf("Calling gnutls_record_recv(session=%p, buffer=%p, buffersize=%u)\n",
  state->session, state->xfer_buffer, ssl_xfer_buffer_size);

sigalrm_seen = FALSE;
if (smtp_receive_timeout > 0) ALARM(smtp_receive_timeout);

errno = 0;
do
  inbytes = gnutls_record_recv(state->session, state->xfer_buffer,
    MIN(ssl_xfer_buffer_size, lim));
while (inbytes == GNUTLS_E_AGAIN);

if (smtp_receive_timeout > 0) ALARM_CLR(0);

if (had_command_timeout)                /* set by signal handler */
  smtp_command_timeout_exit();          /* does not return */
if (had_command_sigterm)
  smtp_command_sigterm_exit();
if (had_data_timeout)
  smtp_data_timeout_exit();
if (had_data_sigint)
  smtp_data_sigint_exit();

/* Timeouts do not get this far.  A zero-byte return appears to mean that the
TLS session has been closed down, not that the socket itself has been closed
down. Revert to non-TLS handling. */

if (sigalrm_seen)
  {
  DEBUG(D_tls) debug_printf("Got tls read timeout\n");
  state->xfer_error = TRUE;
  return FALSE;
  }

else if (inbytes == 0)
  {
  DEBUG(D_tls) debug_printf("Got TLS_EOF\n");
  tls_close(NULL, TLS_NO_SHUTDOWN);
  return FALSE;
  }

/* Handle genuine errors */

else if (inbytes < 0)
  {
  DEBUG(D_tls) debug_printf("%s: err from gnutls_record_recv\n", __FUNCTION__);
  record_io_error(state, (int) inbytes, US"recv", NULL);
  state->xfer_error = TRUE;
  return FALSE;
  }
#ifndef DISABLE_DKIM
dkim_exim_verify_feed(state->xfer_buffer, inbytes);
#endif
state->xfer_buffer_hwm = (int) inbytes;
state->xfer_buffer_lwm = 0;
return TRUE;
}

/*************************************************
*            TLS version of getc                 *
*************************************************/

/* This gets the next byte from the TLS input buffer. If the buffer is empty,
it refills the buffer via the GnuTLS reading function.
Only used by the server-side TLS.

This feeds DKIM and should be used for all message-body reads.

Arguments:  lim         Maximum amount to read/buffer
Returns:    the next character or EOF
*/

int
tls_getc(unsigned lim)
{
exim_gnutls_state_st * state = &state_server;

if (state->xfer_buffer_lwm >= state->xfer_buffer_hwm)
  if (!tls_refill(lim))
    return state->xfer_error ? EOF : smtp_getc(lim);

/* Something in the buffer; return next uschar */

return state->xfer_buffer[state->xfer_buffer_lwm++];
}

BOOL
tls_hasc(void)
{
exim_gnutls_state_st * state = &state_server;
return state->xfer_buffer_lwm < state->xfer_buffer_hwm;
}

uschar *
tls_getbuf(unsigned * len)
{
exim_gnutls_state_st * state = &state_server;
unsigned size;
uschar * buf;

if (state->xfer_buffer_lwm >= state->xfer_buffer_hwm)
  if (!tls_refill(*len))
    {
    if (!state->xfer_error) return smtp_getbuf(len);
    *len = 0;
    return NULL;
    }

if ((size = state->xfer_buffer_hwm - state->xfer_buffer_lwm) > *len)
  size = *len;
buf = &state->xfer_buffer[state->xfer_buffer_lwm];
state->xfer_buffer_lwm += size;
*len = size;
return buf;
}


/* Get up to the given number of bytes from any cached data, and feed to dkim. */
void
tls_get_cache(unsigned lim)
{
#ifndef DISABLE_DKIM
exim_gnutls_state_st * state = &state_server;
int n = state->xfer_buffer_hwm - state->xfer_buffer_lwm;
if (n > lim)
  n = lim;
if (n > 0)
  dkim_exim_verify_feed(state->xfer_buffer+state->xfer_buffer_lwm, n);
#endif
}


BOOL
tls_could_getc(void)
{
return state_server.xfer_buffer_lwm < state_server.xfer_buffer_hwm
 || gnutls_record_check_pending(state_server.session) > 0;
}


/*************************************************
*          Read bytes from TLS channel           *
*************************************************/

/* This does not feed DKIM, so if the caller uses this for reading message body,
then the caller must feed DKIM.

Arguments:
  ct_ctx    client context pointer, or NULL for the one global server context
  buff      buffer of data
  len       size of buffer

Returns:    the number of bytes read
            -1 after a failed read, including EOF
*/

int
tls_read(void * ct_ctx, uschar *buff, size_t len)
{
exim_gnutls_state_st * state = ct_ctx ? ct_ctx : &state_server;
ssize_t inbytes;

if (len > INT_MAX)
  len = INT_MAX;

if (state->xfer_buffer_lwm < state->xfer_buffer_hwm)
  DEBUG(D_tls)
    debug_printf("*** PROBABLY A BUG *** " \
        "tls_read() called with data in the tls_getc() buffer, %d ignored\n",
        state->xfer_buffer_hwm - state->xfer_buffer_lwm);

DEBUG(D_tls)
  debug_printf("Calling gnutls_record_recv(session=%p, buffer=%p, len=" SIZE_T_FMT ")\n",
      state->session, buff, len);

errno = 0;
do
  inbytes = gnutls_record_recv(state->session, buff, len);
while (inbytes == GNUTLS_E_AGAIN);

if (inbytes > 0) return inbytes;
if (inbytes == 0)
  {
  DEBUG(D_tls) debug_printf("Got TLS_EOF\n");
  }
else
  {
  DEBUG(D_tls) debug_printf("%s: err from gnutls_record_recv\n", __FUNCTION__);
  record_io_error(state, (int)inbytes, US"recv", NULL);
  }

return -1;
}




/*************************************************
*         Write bytes down TLS channel           *
*************************************************/

/*
Arguments:
  ct_ctx    client context pointer, or NULL for the one global server context
  buff      buffer of data
  len       number of bytes
  more      more data expected soon

Calling with len zero and more unset will flush buffered writes.  The buff
argument can be null for that case.

Returns:    the number of bytes after a successful write,
            -1 after a failed write
*/

int
tls_write(void * ct_ctx, const uschar * buff, size_t len, BOOL more)
{
ssize_t outbytes;
size_t left = len;
exim_gnutls_state_st * state = ct_ctx ? ct_ctx : &state_server;

#ifdef SUPPORT_CORK
if (more && !state->corked)
  {
  DEBUG(D_tls) debug_printf("gnutls_record_cork(session=%p)\n", state->session);
  gnutls_record_cork(state->session);
  state->corked = TRUE;
  }
#endif

DEBUG(D_tls) debug_printf("%s(%p, " SIZE_T_FMT "%s)\n", __FUNCTION__,
  buff, left, more ? ", more" : "");

while (left > 0)
  {
  DEBUG(D_tls) debug_printf("gnutls_record_send(session=%p, buffer=%p, left=" SIZE_T_FMT ")\n",
      state->session, buff, left);

  errno = 0;
  do
    outbytes = gnutls_record_send(state->session, buff, left);
  while (outbytes == GNUTLS_E_AGAIN);

  DEBUG(D_tls) debug_printf("outbytes=" SSIZE_T_FMT "\n", outbytes);

  if (outbytes < 0)
    {
#ifdef GNUTLS_E_PREMATURE_TERMINATION
    if (  outbytes == GNUTLS_E_PREMATURE_TERMINATION && errno == ECONNRESET
       && !ct_ctx && f.smtp_in_quit
       )
      {                                 /* Outlook, dammit */
      if (LOGGING(protocol_detail))
        log_write(0, LOG_MAIN, "[%s] after QUIT, client reset TCP before"
          " SMTP response and TLS close\n", sender_host_address);
      else
        DEBUG(D_tls) debug_printf("[%s] SSL_write: after QUIT,"
          " client reset TCP before TLS close\n", sender_host_address);
      }
    else
#endif
      {
      DEBUG(D_tls) debug_printf("%s: gnutls_record_send err\n", __FUNCTION__);
      record_io_error(state, outbytes, US"send", NULL);
      }
    return -1;
    }
  if (outbytes == 0)
    {
    record_io_error(state, 0, US"send", US"TLS channel closed on write");
    return -1;
    }

  left -= outbytes;
  buff += outbytes;
  }

if (len > INT_MAX)
  {
  DEBUG(D_tls)
    debug_printf("Whoops!  Wrote more bytes (" SIZE_T_FMT ") than INT_MAX\n",
        len);
  len = INT_MAX;
  }

#ifdef SUPPORT_CORK
if (!more && state->corked)
  {
  DEBUG(D_tls) debug_printf("gnutls_record_uncork(session=%p)\n", state->session);
  do
    /* We can't use GNUTLS_RECORD_WAIT here, as it retries on
    GNUTLS_E_AGAIN || GNUTLS_E_INTR, which would break our timeout set by alarm().
    The GNUTLS_E_AGAIN should not happen ever, as our sockets are blocking anyway.
    But who knows. (That all relies on the fact that GNUTLS_E_INTR and GNUTLS_E_AGAIN
    match the EINTR and EAGAIN errno values.) */
    outbytes = gnutls_record_uncork(state->session, 0);
  while (outbytes == GNUTLS_E_AGAIN);

  if (outbytes < 0)
    {
    record_io_error(state, len, US"uncork", NULL);
    return -1;
    }

  state->corked = FALSE;
  }
#endif

return (int) len;
}




/*************************************************
*            Random number generation            *
*************************************************/

/* Pseudo-random number generation.  The result is not expected to be
cryptographically strong but not so weak that someone will shoot themselves
in the foot using it as a nonce in input in some email header scheme or
whatever weirdness they'll twist this into.  The result should handle fork()
and avoid repeating sequences.  OpenSSL handles that for us.

Arguments:
  max       range maximum
Returns     a random number in range [0, max-1]
*/

#ifdef HAVE_GNUTLS_RND
int
vaguely_random_number(int max)
{
unsigned int r;
int i, needed_len;
uschar smallbuf[sizeof(r)];

if (max <= 1)
  return 0;

needed_len = sizeof(r);
/* Don't take 8 times more entropy than needed if int is 8 octets and we were
asked for a number less than 10. */

for (r = max, i = 0; r; ++i)
  r >>= 1;
i = (i + 7) / 8;
if (i < needed_len)
  needed_len = i;

i = gnutls_rnd(GNUTLS_RND_NONCE, smallbuf, needed_len);
if (i < 0)
  {
  DEBUG(D_all) debug_printf("gnutls_rnd() failed, using fallback\n");
  return vaguely_random_number_fallback(max);
  }
r = 0;
for (uschar * p = smallbuf; needed_len; --needed_len, ++p)
  r = r * 256 + *p;

/* We don't particularly care about weighted results; if someone wants
 * smooth distribution and cares enough then they should submit a patch then. */
return r % max;
}
#else /* HAVE_GNUTLS_RND */
int
vaguely_random_number(int max)
{
  return vaguely_random_number_fallback(max);
}
#endif /* HAVE_GNUTLS_RND */




/*************************************************
*  Let tls_require_ciphers be checked at startup *
*************************************************/

/* The tls_require_ciphers option, if set, must be something which the
library can parse.

Returns:     NULL on success, or error message
*/

uschar *
tls_validate_require_cipher(void)
{
int rc;
uschar *expciphers = NULL;
gnutls_priority_t priority_cache;
const char *errpos;
uschar * dummy_errstr;

#ifdef GNUTLS_AUTO_GLOBAL_INIT
# define validate_check_rc(Label) do { \
  if (rc != GNUTLS_E_SUCCESS) { if (exim_gnutls_base_init_done) \
    return string_sprintf("%s failed: %s", (Label), gnutls_strerror(rc)); } } while (0)
# define return_deinit(Label) do { return (Label); } while (0)
#else
# define validate_check_rc(Label) do { \
  if (rc != GNUTLS_E_SUCCESS) { if (exim_gnutls_base_init_done) gnutls_global_deinit(); \
    return string_sprintf("%s failed: %s", (Label), gnutls_strerror(rc)); } } while (0)
# define return_deinit(Label) do { gnutls_global_deinit(); return (Label); } while (0)
#endif

if (exim_gnutls_base_init_done)
  log_write(0, LOG_MAIN|LOG_PANIC,
      "already initialised GnuTLS, Exim developer bug");

#if defined(HAVE_GNUTLS_PKCS11) && !defined(GNUTLS_AUTO_PKCS11_MANUAL)
if (!gnutls_allow_auto_pkcs11)
  {
  rc = gnutls_pkcs11_init(GNUTLS_PKCS11_FLAG_MANUAL, NULL);
  validate_check_rc(US"gnutls_pkcs11_init");
  }
#endif
#ifndef GNUTLS_AUTO_GLOBAL_INIT
rc = gnutls_global_init();
validate_check_rc(US"gnutls_global_init()");
#endif
exim_gnutls_base_init_done = TRUE;

if (!(tls_require_ciphers && *tls_require_ciphers))
  return_deinit(NULL);

if (!expand_check(tls_require_ciphers, US"tls_require_ciphers", &expciphers,
                  &dummy_errstr))
  return_deinit(US"failed to expand tls_require_ciphers");

if (!(expciphers && *expciphers))
  return_deinit(NULL);

DEBUG(D_tls)
  debug_printf("tls_require_ciphers expands to \"%s\"\n", expciphers);

rc = gnutls_priority_init(&priority_cache, CS expciphers, &errpos);
validate_check_rc(string_sprintf(
      "gnutls_priority_init(%s) failed at offset %ld, \"%.8s..\"",
      expciphers, (long)(errpos - CS expciphers), errpos));

#undef return_deinit
#undef validate_check_rc
#ifndef GNUTLS_AUTO_GLOBAL_INIT
gnutls_global_deinit();
#endif

return NULL;
}




/*************************************************
*         Report the library versions.           *
*************************************************/

/* See a description in tls-openssl.c for an explanation of why this exists.

Arguments:   string to append to
Returns:     string
*/

gstring *
tls_version_report(gstring * g)
{
return string_fmt_append(g,
    "Library version: GnuTLS: Compile: %s\n"
    "                         Runtime: %s\n",
             LIBGNUTLS_VERSION,
             gnutls_check_version(NULL));
}

#endif  /*!MACRO_PREDEF*/
/* vi: aw ai sw=2
*/
/* End of tls-gnu.c */