From cc00f4af38ebcc8255460398f573ba6e6ec842e3 Mon Sep 17 00:00:00 2001 From: Jeremy Harris Date: Sun, 15 Feb 2015 21:33:05 +0000 Subject: [PATCH] Withdraw A6 DNS record support --- doc/doc-docbook/spec.xfpt | 24 +++-- doc/doc-txt/ChangeLog | 2 + doc/doc-txt/NewStuff | 6 ++ src/OS/Makefile-Default | 8 -- src/src/acl.c | 22 +---- src/src/dns.c | 195 +------------------------------------- src/src/host.c | 4 - src/src/lookups/dnsdb.c | 21 +--- 8 files changed, 30 insertions(+), 252 deletions(-) diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt index 411eb988e..af000dc8f 100644 --- a/doc/doc-docbook/spec.xfpt +++ b/doc/doc-docbook/spec.xfpt @@ -1985,10 +1985,9 @@ Two different types of DNS record for handling IPv6 addresses have been defined. AAAA records (analogous to A records for IPv4) are in use, and are currently seen as the mainstream. Another record type called A6 was proposed as better than AAAA because it had more flexibility. However, it was felt to be -over-complex, and its status was reduced to &"experimental"&. It is not known -if anyone is actually using A6 records. Exim has support for A6 records, but -this is included only if you set &`SUPPORT_A6=YES`& in &_Local/Makefile_&. The -support has not been tested for some time. +over-complex, and its status was reduced to &"experimental"&. Exim used to +have a compile option for including A6 record support but this has now been +withdrawn. @@ -6880,8 +6879,8 @@ is used on its own as the result. If the lookup does not succeed, the &<>& for an explanation of what this means. The supported DNS record types are A, CNAME, MX, NS, PTR, SPF, SRV, TLSA and TXT, -and, when Exim is compiled with IPv6 support, AAAA (and A6 if that is also -configured). If no type is given, TXT is assumed. When the type is PTR, +and, when Exim is compiled with IPv6 support, AAAA. +If no type is given, TXT is assumed. When the type is PTR, the data can be an IP address, written as normal; inversion and the addition of &%in-addr.arpa%& or &%ip6.arpa%& happens automatically. For example: .code @@ -6890,8 +6889,7 @@ ${lookup dnsdb{ptr=192.168.4.5}{$value}fail} If the data for a PTR record is not a syntactically valid IP address, it is not altered and nothing is added. -For any record type, if multiple records are found (or, for A6 lookups, if a -single record leads to multiple addresses), the data is returned as a +For any record type, if multiple records are found, the data is returned as a concatenation, with newline as the default separator. The order, of course, depends on the DNS resolver. You can specify a different separator character between multiple records by putting a right angle-bracket followed immediately @@ -7013,7 +7011,7 @@ The authorization code can be &"Y"& for yes, &"N"& for no, &"X"& for explicit authorization required but absent, or &"?"& for unknown. .cindex "A+" "in &(dnsdb)& lookup" -The pseudo-type A+ performs an A6 lookup (if configured) followed by an AAAA +The pseudo-type A+ performs an AAAA and then an A lookup. All results are returned; defer processing (see below) is handled separately for each lookup. Example: .code @@ -18069,7 +18067,7 @@ when there is a DNS lookup error. .cindex "DNS" "DNSSEC" DNS lookups for domains matching &%dnssec_request_domains%& will be done with the dnssec request bit set. -This applies to all of the SRV, MX A6, AAAA, A lookup sequence. +This applies to all of the SRV, MX, AAAA, A lookup sequence. @@ -18081,7 +18079,7 @@ This applies to all of the SRV, MX A6, AAAA, A lookup sequence. DNS lookups for domains matching &%dnssec_request_domains%& will be done with the dnssec request bit set. Any returns not having the Authenticated Data bit (AD bit) set wil be ignored and logged as a host-lookup failure. -This applies to all of the SRV, MX A6, AAAA, A lookup sequence. +This applies to all of the SRV, MX, AAAA, A lookup sequence. @@ -23008,7 +23006,7 @@ details. .cindex "DNS" "DNSSEC" DNS lookups for domains matching &%dnssec_request_domains%& will be done with the dnssec request bit set. -This applies to all of the SRV, MX A6, AAAA, A lookup sequence. +This applies to all of the SRV, MX, AAAA, A lookup sequence. @@ -23020,7 +23018,7 @@ This applies to all of the SRV, MX A6, AAAA, A lookup sequence. DNS lookups for domains matching &%dnssec_request_domains%& will be done with the dnssec request bit set. Any returns not having the Authenticated Data bit (AD bit) set wil be ignored and logged as a host-lookup failure. -This applies to all of the SRV, MX A6, AAAA, A lookup sequence. +This applies to all of the SRV, MX, AAAA, A lookup sequence. diff --git a/doc/doc-txt/ChangeLog b/doc/doc-txt/ChangeLog index cff7f4445..c9e35733e 100644 --- a/doc/doc-txt/ChangeLog +++ b/doc/doc-txt/ChangeLog @@ -73,6 +73,8 @@ JH/19 Bug 392: spamd_address, and clamd av_scanner, now support retry JH/20 BUG 1571: Ensure that $tls_in_peerdn is set, when verification fails under OpenSSL. +JH/21 Support for the A6 type of dns record is withdrawn. + Exim version 4.85 diff --git a/doc/doc-txt/NewStuff b/doc/doc-txt/NewStuff index c371cb2dd..33d23f72a 100644 --- a/doc/doc-txt/NewStuff +++ b/doc/doc-txt/NewStuff @@ -16,6 +16,12 @@ Version 4.86 3. New "malware=" support for Avast. + 4. New "spam=" variant option for Rspamd. + + 5. Assorted options on malware= and spam= scanners. + + 6. A commandline option to write a comment into the logfile. + Version 4.85 ------------ diff --git a/src/OS/Makefile-Default b/src/OS/Makefile-Default index 60d5ea83b..a0d9afa95 100644 --- a/src/OS/Makefile-Default +++ b/src/OS/Makefile-Default @@ -186,14 +186,6 @@ EXIWHAT_KILL_SIGNAL=-USR1 # IPV6_USE_INET_PTON=yes -# Setting the next option brings in support for A6 DNS records for IPV6. These -# were at one time expected to supplant AAAA records, but were eventually -# rejected. The code remains in Exim, but has not been compiled or tested for -# quite some time. Do not set this unless you know what you are doing. - -# SUPPORT_A6=yes - - # HOSTNAME_COMMAND contains the path to the "hostname" command, which varies # from OS to OS. This is used when building the Exim monitor script only. (See # also BASENAME_COMMAND.) If HOSTNAME_COMMAND is set to "look_for_it" then the diff --git a/src/src/acl.c b/src/src/acl.c index 69db5cda7..18119ecfa 100644 --- a/src/src/acl.c +++ b/src/src/acl.c @@ -1396,9 +1396,6 @@ for (rr = dns_next_rr(dnsa, dnss, reset); if (rr->type != T_A #if HAVE_IPV6 && rr->type != T_AAAA - #ifdef SUPPORT_A6 - && rr->type != T_A6 - #endif #endif ) continue; @@ -1618,24 +1615,20 @@ else type = T_A; -#if HAVE_IPV6 && defined(SUPPORT_A6) -DNS_LOOKUP_AGAIN: -#endif - lookup_dnssec_authenticated = NULL; switch (dns_lookup(&dnsa, target, type, NULL)) { /* If something bad happened (most commonly DNS_AGAIN), defer. */ default: - return t->data.val = CSA_DEFER_ADDR; + return t->data.val = CSA_DEFER_ADDR; /* If the query succeeded, scan the addresses and return the result. */ case DNS_SUCCEED: - rc = acl_verify_csa_address(&dnsa, &dnss, RESET_ANSWERS, target); - if (rc != CSA_FAIL_NOADDR) return t->data.val = rc; - /* else fall through */ + rc = acl_verify_csa_address(&dnsa, &dnss, RESET_ANSWERS, target); + if (rc != CSA_FAIL_NOADDR) return t->data.val = rc; + /* else fall through */ /* If the target has no IP addresses, the client cannot have an authorized IP address. However, if the target site uses A6 records (not AAAA records) @@ -1643,12 +1636,7 @@ switch (dns_lookup(&dnsa, target, type, NULL)) case DNS_NOMATCH: case DNS_NODATA: - - #if HAVE_IPV6 && defined(SUPPORT_A6) - if (type == T_AAAA) { type = T_A6; goto DNS_LOOKUP_AGAIN; } - #endif - - return t->data.val = CSA_FAIL_NOADDR; + return t->data.val = CSA_FAIL_NOADDR; } } diff --git a/src/src/dns.c b/src/src/dns.c index 79eb9360e..a2f430993 100644 --- a/src/src/dns.c +++ b/src/src/dns.c @@ -10,16 +10,6 @@ #include "exim.h" -/* Function declaration needed for mutual recursion when A6 records -are supported. */ - -#if HAVE_IPV6 -#ifdef SUPPORT_A6 -static void dns_complete_a6(dns_address ***, dns_answer *, dns_record *, - int, uschar *); -#endif -#endif - /************************************************* * Fake DNS resolver * @@ -640,22 +630,16 @@ the IP address instead of returning -1 with h_error=HOST_NOT_FOUND. Some nameservers are also believed to do this. It is, of course, contrary to the specification of the DNS, so we lock it out. */ -if (( - #ifdef SUPPORT_A6 - type == T_A6 || - #endif - type == T_A || type == T_AAAA) && - string_is_ip_address(name, NULL) != 0) +if ((type == T_A || type == T_AAAA) && string_is_ip_address(name, NULL) != 0) return DNS_NOMATCH; /* If we are running in the test harness, instead of calling the normal resolver (res_search), we call fakens_search(), which recognizes certain special domains, and interfaces to a fake nameserver for certain special zones. */ -if (running_in_test_harness) - dnsa->answerlen = fakens_search(name, type, dnsa->answer, MAXPACKET); -else - dnsa->answerlen = res_search(CCS name, C_IN, type, dnsa->answer, MAXPACKET); +dnsa->answerlen = running_in_test_harness + ? fakens_search(name, type, dnsa->answer, MAXPACKET) + : res_search(CCS name, C_IN, type, dnsa->answer, MAXPACKET); if (dnsa->answerlen > MAXPACKET) { @@ -1052,164 +1036,6 @@ return DNS_FAIL; -/* Support for A6 records has been commented out since they were demoted to -experimental status at IETF 51. */ - -#if HAVE_IPV6 && defined(SUPPORT_A6) - -/************************************************* -* Search DNS block for prefix RRs * -*************************************************/ - -/* Called from dns_complete_a6() to search an additional section or a main -answer section for required prefix records to complete an IPv6 address obtained -from an A6 record. For each prefix record, a recursive call to dns_complete_a6 -is made, with a new copy of the address so far. - -Arguments: - dnsa the DNS answer block - which RESET_ADDITIONAL or RESET_ANSWERS - name name of prefix record - yptrptr pointer to the pointer that points to where to hang the next - dns_address structure - bits number of bits we have already got - bitvec the bits we have already got - -Returns: TRUE if any records were found -*/ - -static BOOL -dns_find_prefix(dns_answer *dnsa, int which, uschar *name, dns_address - ***yptrptr, int bits, uschar *bitvec) -{ -BOOL yield = FALSE; -dns_record *rr; -dns_scan dnss; - -for (rr = dns_next_rr(dnsa, &dnss, which); - rr != NULL; - rr = dns_next_rr(dnsa, &dnss, RESET_NEXT)) - { - uschar cbitvec[16]; - if (rr->type != T_A6 || strcmpic(rr->name, name) != 0) continue; - yield = TRUE; - memcpy(cbitvec, bitvec, sizeof(cbitvec)); - dns_complete_a6(yptrptr, dnsa, rr, bits, cbitvec); - } - -return yield; -} - - - -/************************************************* -* Follow chains of A6 records * -*************************************************/ - -/* A6 records may be incomplete, with pointers to other records containing more -bits of the address. There can be a tree structure, leading to a number of -addresses originating from a single initial A6 record. - -Arguments: - yptrptr pointer to the pointer that points to where to hang the next - dns_address structure - dnsa the current DNS answer block - rr the RR we have at present - bits number of bits we have already got - bitvec the bits we have already got - -Returns: nothing -*/ - -static void -dns_complete_a6(dns_address ***yptrptr, dns_answer *dnsa, dns_record *rr, - int bits, uschar *bitvec) -{ -static uschar bitmask[] = { 0xff, 0xfe, 0xfc, 0xf8, 0xf0, 0xe0, 0xc0, 0x80 }; -uschar *p = (uschar *)(rr->data); -int prefix_len, suffix_len; -int i, j, k; -uschar *chainptr; -uschar chain[264]; -dns_answer cdnsa; - -/* The prefix length is the first byte. It defines the prefix which is missing -from the data in this record as a number of bits. Zero means this is the end of -a chain. The suffix is the data in this record; only sufficient bytes to hold -it are supplied. There may be zero bytes. We have to ignore trailing bits that -we have already obtained from earlier RRs in the chain. */ - -prefix_len = *p++; /* bits */ -suffix_len = (128 - prefix_len + 7)/8; /* bytes */ - -/* If the prefix in this record is greater than the prefix in the previous -record in the chain, we have to ignore the record (RFC 2874). */ - -if (prefix_len > 128 - bits) return; - -/* In this little loop, the number of bits up to and including the current byte -is held in k. If we have none of the bits in this byte, we can just or it into -the current data. If we have all of the bits in this byte, we skip it. -Otherwise, some masking has to be done. */ - -for (i = suffix_len - 1, j = 15, k = 8; i >= 0; i--) - { - int required = k - bits; - if (required >= 8) bitvec[j] |= p[i]; - else if (required > 0) bitvec[j] |= p[i] & bitmask[required]; - j--; /* I tried putting these in the "for" statement, but gcc muttered */ - k += 8; /* about computed values not being used. */ - } - -/* If the prefix_length is zero, we are at the end of a chain. Build a -dns_address item with the current data, hang it onto the end of the chain, -adjust the hanging pointer, and we are done. */ - -if (prefix_len == 0) - { - dns_address *new = store_get(sizeof(dns_address) + 50); - inet_ntop(AF_INET6, bitvec, CS new->address, 50); - new->next = NULL; - **yptrptr = new; - *yptrptr = &(new->next); - return; - } - -/* Prefix length is not zero. Reset the number of bits that we have collected -so far, and extract the chain name. */ - -bits = 128 - prefix_len; -p += suffix_len; - -chainptr = chain; -while ((i = *p++) != 0) - { - if (chainptr != chain) *chainptr++ = '.'; - memcpy(chainptr, p, i); - chainptr += i; - p += i; - } -*chainptr = 0; -chainptr = chain; - -/* Now scan the current DNS response record to see if the additional section -contains the records we want. This processing can be cut out for testing -purposes. */ - -if (dns_find_prefix(dnsa, RESET_ADDITIONAL, chainptr, yptrptr, bits, bitvec)) - return; - -/* No chain records were found in the current DNS response block. Do a new DNS -lookup to try to find these records. This opens up the possibility of DNS -failures. We ignore them at this point; if all branches of the tree fail, there -will be no addresses at the end. */ - -if (dns_lookup(&cdnsa, chainptr, T_A6, NULL) == DNS_SUCCEED) - (void)dns_find_prefix(&cdnsa, RESET_ANSWERS, chainptr, yptrptr, bits, bitvec); -} -#endif /* HAVE_IPV6 && defined(SUPPORT_A6) */ - - /************************************************* @@ -1234,12 +1060,7 @@ dns_address_from_rr(dns_answer *dnsa, dns_record *rr) { dns_address *yield = NULL; -#if HAVE_IPV6 && defined(SUPPORT_A6) -dns_address **yieldptr = &yield; -uschar bitvec[16]; -#else dnsa = dnsa; /* Stop picky compilers warning */ -#endif if (rr->type == T_A) { @@ -1251,14 +1072,6 @@ if (rr->type == T_A) #if HAVE_IPV6 -#ifdef SUPPORT_A6 -else if (rr->type == T_A6) - { - memset(bitvec, 0, sizeof(bitvec)); - dns_complete_a6(&yieldptr, dnsa, rr, 0, bitvec); - } -#endif /* SUPPORT_A6 */ - else { yield = store_get(sizeof(dns_address) + 50); diff --git a/src/src/host.c b/src/src/host.c index d40925ecd..f6c8faac7 100644 --- a/src/src/host.c +++ b/src/src/host.c @@ -2247,11 +2247,7 @@ loop once only, looking only for A records. */ else #endif /* STAND_ALONE */ - #ifdef SUPPORT_A6 - i = 2; /* look up A6 and AAAA and A records */ - #else i = 1; /* look up AAAA and A records */ - #endif /* SUPPORT_A6 */ /* The IPv4 world */ diff --git a/src/src/lookups/dnsdb.c b/src/src/lookups/dnsdb.c index ac0bff221..1e8df3b16 100644 --- a/src/src/lookups/dnsdb.c +++ b/src/src/lookups/dnsdb.c @@ -34,9 +34,6 @@ static const char *type_names[] = { #if HAVE_IPV6 "a+", "aaaa", - #ifdef SUPPORT_A6 - "a6", - #endif #endif "cname", "csa", @@ -56,9 +53,6 @@ static int type_values[] = { #if HAVE_IPV6 T_ADDRESSES, /* Private type for AAAA + A */ T_AAAA, - #ifdef SUPPORT_A6 - T_A6, - #endif #endif T_CNAME, T_CSA, /* Private type for "Client SMTP Authorization". */ @@ -345,13 +339,7 @@ while ((domain = string_nextinlist(&keystring, &sep, buffer, sizeof(buffer))) #if HAVE_IPV6 if (type == T_ADDRESSES) /* NB cannot happen unless HAVE_IPV6 */ { - if (searchtype == T_ADDRESSES) -# if defined(SUPPORT_A6) - searchtype = T_A6; -# else - searchtype = T_AAAA; -# endif - else if (searchtype == T_A6) searchtype = T_AAAA; + if (searchtype == T_ADDRESSES) searchtype = T_AAAA; else if (searchtype == T_AAAA) searchtype = T_A; rc = dns_special_lookup(&dnsa, domain, searchtype, CUSS &found); } @@ -389,12 +377,7 @@ while ((domain = string_nextinlist(&keystring, &sep, buffer, sizeof(buffer))) separator between them, just as for between several records. However, A6 support is not normally configured these days. */ - if (type == T_A || - #ifdef SUPPORT_A6 - type == T_A6 || - #endif - type == T_AAAA || - type == T_ADDRESSES) + if (type == T_A || type == T_AAAA || type == T_ADDRESSES) { dns_address *da; for (da = dns_address_from_rr(&dnsa, rr); da != NULL; da = da->next) -- 2.30.2